Hewlett Packard Enterprise Advanced Power Manager Kit

QuickSpecs
HP Advanced Power Manager
Overview
HP Advanced Power Manager
The HP Advanced Power Manager is a rack level solution for the HP Apollo 6000, HP ProLiant SL6500, SL4500, SL2500, and HP
Moonshot1500 System. HP APM will automatically discover hardware components and enable bay level power on and off, server
metering, aggregate dynamic power capping, configurable power-up dependencies and sequencing, consolidated Ethernet access
to all resident iLOs, and asset management capabilities.
HP APM features rack level event logging, RADIUS authentication, integrated serial concentrator, up to 11 local user accounts,
read only service port, and supports SNMP, SSH, Syslogd, telnet.
Front View:
Consolidated Management Ports 1 - 10 (RDM1)
1.
Power LED
2.
3.
Serial port for management of top of rack switch
4.
RDM 3 port for SL-APM Distribution module
5.
RDM 2 port for SL-APM Distribution module
6.
iLO port
7.
UID LED
8.
Health LED
9.
Reset Button
10.
Ethernet Management port
11.
Service port
12.
Serial Console port
13.
Micro SD Card slot*
14.
Power Distribution Module (PDM) ports 1 - 6
*Future enablement
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 1
QuickSpecs
HP Advanced Power Manager
Overview
Back View/Side View
1.
Power plugs 1 and 2
2.
On-Generator and AUX signals
3.
Redundant reset
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 2
QuickSpecs
HP Advanced Power Manager
Standard Features
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for
one year from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements.
NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business
day response. Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 3
QuickSpecs
HP Advanced Power Manager
Optional Features
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array
of servers and storage and configurable network switches.
For more information on Factory Express services for your specific server model please contact your
sales representative or go to: http://www.hp.com/go/factory-express.
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 4
QuickSpecs
HP Advanced Power Manager
Service and Support
Service and Support
Support for HP Advanced Power Manager is covered by the support for the server installed in the
same rack.
HP Technology Services
HP Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP
Care Pack services provide total care and support expertise with committed response choices designed
to meet your IT and business need.
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services
Support for the HP APM is provided by the servers installed in the rack. Consider the criticality of the
servers and choose the recommended service level that meets your needs.
Parts and materials
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and
recommended engineering improvements. Supplies and consumable parts will not be provided as part
of this service; standard warranty terms and conditions apply. Parts and components that have
exceeded their maximum supported lifetime and/or the maximum usage limitations as set forth in the
manufacturer's operating manual or the technical product data sheet will not be provided, repaired or
replaced as part of this service.
For more information
To learn more on services for your HP server, contact your HP sales representative or authorized
channel partner Or visit: http://www.hp.com/go/scalable
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 5
QuickSpecs
HP Advanced Power Manager
Configuration Information
NOTE: Contact your local sales representative for information on configurable product offerings and requirements.
Configuration Example 1
Appropriate for chassis with consolidated management port such as HP Apollo a6000 chassis.
HP Advanced Power
HP Advanced Power Manager Kit
Manager
NOTE: Each HP APM can connect up to 10 chassis via consolidated management
cable.
HP 4M Consolidated management Cable
NOTE: 1 cable per chassis.
HP 3M Micro DB9 to Micro DB9 Cable (PDM Cable)
NOTE: This cable is required for connectivity to DC Power shelf.
741192-B21
762048-B21
762049-B21
Configuration Example 2
Appropriate for chassis with SL APM/RDM port such as s6500.
HP Advanced Power
HP Advanced Power Manager Kit
Manager
NOTE: Each HP APM can connect to 2 HP SL Advanced Power Manager Distribution
(SL APMD) modules.
HP SL Advanced Power Manager Distribution module (SL APMD) Kit
NOTE: Each SL APMD can connect up to 10 chassis.
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
741192-B21
620002-B21
Page 6
QuickSpecs
HP Advanced Power Manager
Technical Specifications
System Unit
Chassis Dimensions
(H x W x D)
Weight
(approximate)
Input Requirements
(per power supply)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
1.625" x 8.25" x 13" (4.128 x 20.95 x 33.02cm)
9 lbs
Rated Line Voltage
Rated Input Current
100 to 240 VAC
1.0A at 115VAC
1.0A at 230VAC
Rated Input Frequency
50 to 60 Hz
Rated Input Power
12W (at 100 VAC),
12W (at 200 VAC)
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL:
http://www8.hp.com/us/en/products/servers/solutions.html?compURI=1439951
653.10W (at 100 VAC),
653.08W (at 200 VAC)
Operating
50° to 140° F (10° to 60° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft (1.0°C
per every 305 m) above sea level to a maximum
of 10,000 ft (3050 m), no direct sustained
sunlight. Maximum rate of change is 18°F/hr
(10°C/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 86°F (30°C).
Non-operating
-22° to 185° F (-30° to 85° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Operating
10% to 90% relative humidity (Rh), 82.4°F (28°C)
maximum wet bulb temperature, noncondensing.
Non-operating
5% to 95% relative humidity (Rh), 101.7°F
(38.7°C) maximum wet bulb temperature, noncondensing.
Operating
10,000 ft (3050 m). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating
30,000 ft (9144 m). Maximum allowable altitude
change rate is 1500 ft/min (457 m/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when the
product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with
ISO 9296 (ECMA 109).
Idle
LWAd
N/A
LpAm
N/A
Operating
LWAd
N/A
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 7
QuickSpecs
HP Advanced Power Manager
Technical Specifications
LpAm
Emissions
Classification (EMC)
Environment-friendly
Products and Approach
N/A
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on sample
(type) testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and
and Recycling
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted on
the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 8
QuickSpecs
HP Advanced Power Manager
Summary of Changes
Date
10-June-2014
Version History
From Version 5 to 6
Action
Changed
18-Apr-2014
17-May-2013
From Version 4 to 5
From Version 3 to 4
Changed
Changed
10-May-2013
From Version 2 to 3
Changed
Description of Change:
Changes made on Introduction Message, Images, Care
Pack Services, Configuration Examples.
Recommended and Related Services were revised.
Correction made to the North America and Canada
versions only.
Overview: Updated Image section.
Changed
Configuration Information-Factory Integrated Models:
Updated Step 1.
Changed the title.
05-Jun-2012
From Version 1 to 2
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 9
QuickSpecs
HP Advanced Power Manager
Summary of Changes
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
c04111481 — DA – 14189 Worldwide — Version 6 — June 10, 2014
Page 10