Add-On Computer Peripherals (ACP) QSFP-40G-LR-AO network transceiver module Datasheet
Add to my manuals9 Pages
advertisement
▼
Scroll to page 2
of 9
QSFP-‐40G-‐LR-‐AO ALCATEL-‐LUCENT 40GBASE-‐LR4 QSFP+ SMF CWDM 10KM REACH LC DOM www.addoncomputer.com QSFP-‐40G-‐LR-‐AO 40Gbase QSFP+ Transceiver Features • • • • • • • • • • • • 4 CWDM lanes MUX/DEMUX design 4 independent full-‐duplex channels Up to 11.2Gbps data rate per wavelength 4 CWDM channels are 1271, 1291, 1311 and 1331nm Single +3.3V power supply QSFP+ MSA compliant Up to 10km transmission reach Operating case temperature: 0°C~70°C Maximum 3.5W operation power RoHS compliant Compliant with IEEE802.3ba Compliant with QSFP+ MSA: SFF-‐8436 Digital diagnostic compatible with SFF-‐847 Rev11.0 Applications • 40G Ethernet • Infiniband 4X SDR DDR QDR • 40G Telecom connections Product Description AddOn Computer’s QSFP-‐40G-‐LR-‐AO Quad Small Form Factor Pluggable (QSFP+) transceivers are compatible with the Small Form Factor Pluggable Multi-‐Sourcing Agreement (MSA). The QSFP+ transceivers are high performance, cost effective modules supporting 40 Gigabit Ethernet and up to 10km transmission distance with SMF. AddOn Computer’s QSFP+ transceivers are RoHS compliant and lead-‐free. www.addoncomputer.com Phone: 877.292.1701 1 Recommend Circuit Schematic www.addoncomputer.com Phone: 877.292.1701 2 Electrical Pin-‐out Details Pin Descriptions Pin Logic Symbol Name/Descriptions Ref. 1 GND Module Ground 1 2 CML-‐I Tx2-‐ Transmitter inverted data input 3 CML-‐I Tx2+ Transmitter non-‐inverted data input 4 GND Module Ground 1 5 CML-‐I Tx4-‐ Transmitter inverted data input 6 CML-‐I Tx4+ Transmitter non-‐inverted data input 7 GND Module Ground 1 8 LVTTL-‐I MODSEIL Module Select 2 9 LVTTL-‐I ResetL Module Reset 2 10 VCCRx +3.3v Receiver Power Supply 11 LVCMOS-‐I SCL 2-‐wire Serial interface clock 2 12 LVCMOS-‐I/O SDA 2-‐wire Serial interface data 2 13 GND Module Ground 1 14 CML-‐O RX3+ Receiver non-‐inverted data output 15 CML-‐O RX3-‐ Receiver inverted dta output 16 GND Module Ground 1 17 CML-‐O RX1+ Receiver non-‐inverted data output 18 CML-‐O RX1-‐ Receiver inverted data output www.addoncomputer.com Phone: 877.292.1701 3 19 GND Module Ground 1 20 GND Module Ground 1 21 CML-‐O RX2-‐ Receiver inverted data output 22 CML-‐O RX2+ Receiver non-‐inverted data output 23 GND Module Ground 1 24 CML-‐O RX4-‐ Receiver inverted data output 25 CML-‐O RX4+ Receiver non-‐inverted data output 26 GND Module Ground 1 27 LVTTL-‐O ModPrsL Module Present, internal pulled down to GND 28 LVTTL-‐O IntL Interrupt output, should be pulled up on host board 2 29 VCCTx +3.3v Transmitter Power Supply 30 VCC1 +3.3v Power Supply 31 LVTTL-‐I LPMode Low Power Mode 2 32 GND Module Ground 1 33 CML-‐I Tx3+ Transmitter non-‐inverted data input 34 CML-‐I Tx3-‐ Transmitter inverted data input 35 GND Module Ground 1 36 CML-‐I Tx1+ Transmitter non-‐inverted data input 37 CML-‐I Tx1-‐ Transmitter inverted data input 38 GND Module Ground 1 Note: 1. Module circuit ground is isolated from module chassis ground with in the module. 2. Open collector; should be pulled up with 4.7k-‐10k ohms on host board to a voltage between 3.15V and 3.6V. Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Storage Temperature TS -‐40 85 °C Relative Humidity Rh 0 85 % Supply Voltage Vcc -‐0.5 4.0 V www.addoncomputer.com Phone: 877.292.1701 4 Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Power Supply Voltage Vcc 3.13 3.3 3.47 V Power Supply Current Icc 100 mA Case Operating Temperature Tc -‐5 70 °C Symbol Min. Typ. Max. Unit Notes L0 1264.5 1271 1277.5 nm L1 1284.5 1291 1297.5 nm L2 1304.5 1311 1317.5 nm L3 1324.5 1331 1337.5 nm Side-‐mode Suppression Ratio SMSR 30 dB Total Average Launch Power PT 8.3 dBm Average Launch Power, each Lane -‐7 2.3 dBm Optical Modulation Amplitude, each Lane OMA -‐4 3.5 dBm 6.5 dB -‐4.8 dBm TDP, each Lane TDP 2.3 dB Extinction Ratio ER 3.5 dB Relative Intensity Noise Rin -‐128 dB/Hz 12dB reflection Optical Return Loss Tolerance 20 dB Transmitter Reflectance RT -‐12 dB dBm Optical Characteristics Parameter Wavelength Transmitter Difference in launch Power between any two lanes (OMA) Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane Transmitter Eye Mask Definition X1, X2, X3, Y1, Y2, Y3 Average Launch Power OFF Transmitter, each Lane www.addoncomputer.com Specification Values 0.25, 0.4, 0.45, 0.25, 0.28, 0.4 Poff Phone: 877.292.1701 -‐30 5 Receiver Damage Threshold THd 3.3 dBm 1 Average Power at receiver Input, each Lane -‐13.7 2.3 dB Receiver Reflectance RR -‐26 dB Receiver Power (OMA), each Lane 3.5 dBm Stressed Receiver Sensitivity in OMA, each Lane -‐9.9 dBm Receiver Sensitivity, each Lane SR -‐11.5 dBm Difference in Receive Power between any Lanes (OMA) -‐7.5 dBm Condition of Stress Receiver Sensitivity Test Vertical Eye Closure Penalty, each Lane 1.6 dB Stressed Eye Jitter, each Lane 0.3 UI Note: 1. The receiver shall be able to tolerate, without damage, continuous exposure to a modulated optical input signal having this power level on one lane. The receiver does not have to operate correctly at this input power. Electrical Characteristics Parameter Symbol Min. Typ. Max. Unit Notes Power Consumption (XLPPI) 1.5 W Supply Current ICC 0.75 1.0 A Control I/O Voltage, High VIH 2.0 VCC V Control I/O Voltage, Low VIL 0 0.7 V Inter-‐Channel Skew TSK 150 ps RESETL Duration 10 us RESETL De-‐assert time 100 ms Power on time 100 ms -‐0.3 4 V Transmitter Single Ended Output Voltage Tolerance www.addoncomputer.com Phone: 877.292.1701 6 AC Common mode Voltage Tolerance (RMS) 15 mV Tx Input Diff Voltage VI 90 1600 mV Tx Input Diff Impedance ZIN 80 100 120 Ω dB 10MHz-‐ 11.1GHz Differential Input Return Loss See IEEE 802.3ba 86A.4.11 J2 Jitter tolerance Jt2 0.18 UI J9 Jitter Tolerance Jt9 0.26 UI Data Dependent Pulse Width Shrinkage DDPWS 0.07 UI Eye Mask Coordinates X1, X2, Y1, Y2 0.1. 0.31, 95, 350 Receiver (XLPPI) Single Ended Output Voltage Tolerance -‐0.3 4 V Preferred to TP1 signal common AC Common mode Voltage Tolerance (RMS) 7.5 mV Termination Mismatch at 1MHz 5 % Differential Output Return Loss See IEEE 802.3ba 86A.4.2.1 dB Common-‐mode Output Return Loss See IEEE 802.3ba 86A.4.2.1 dB 10MHz-‐ 11.1GHz 10MHz-‐ 11.1GHz Rx Output Diff Voltage Vo 600 800 mV Rx Output Rise and Fall Time Tr/Tf 35 ps 20% to 80% J2 Jitter Tolerance Jr2 0.46 UI J9 Jitter Tolerance Jr9 0.63 UI UI mV Eye Mask Coordinates X1, X2, Y1, Y2 0.29, 0.5, 150, 425 Note: 1. The single ended input voltage tolerance is the allowable range of the instantaneous input signals www.addoncomputer.com Phone: 877.292.1701 7 EEPROM Information www.addoncomputer.com Phone: 877.292.1701 8 Mechanical Specifications Contact Information AddOn Computer, Inc. is a leading supplier of Memory Upgrade, Network Transceivers and Network connectivity products to Channel Partners, Resellers and OEMs, with more than seventeen years of direct industry experience. AddOn Computer has been the exclusive supplier to Ingram Micro's "Memory Upgrades" program for the past nine years. AddOn Computer maximizes profitable opportunities for our partners. Our ability to source product worldwide, ensures that our pricing will always be competitive. Offering turnkey solutions, AddOn Computer has forged a reputation as a solutions provider, delivering high quality, cost effective product in a timely and reliable manner. Corporate office: AddOn Computer 30400 Esperanza Rancho Santa Margarita, CA 92688 Tel: 877-‐292-‐1701 Fax: 949-‐266-‐9273 Email: [email protected] Email: [email protected] Web: http://www.addoncomputer.com www.addoncomputer.com Phone: 877.292.1701 9
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement