PRELIMINARY
Technical specifications are subject to change without notice.
PT-RZ670 SERIES
1-CHIP DLP™ PROJECTORS
WORLD'S FIRST*1 LASER LIGHT SOURCE 1-CHIP DLP™ PROJECTORS
WITH 6,500 LM OF BRIGHTNESS
PT-RZ670B/W
PT-RW630B/W
6,500 lm
WUXGA (1920 × 1200)
6,500 lm
WXGA (1280 × 800)
NOTE: Models without lenses (PT-RZ670LB/ RZ670LW/RW630LB/RW630LW) are also available. The specifications are the same as those of the PT-RZ670B/ RZ670W/RW630B/RW630W respectively.
All models are offered in a black (PT-RZ670B/RZ670LB/RW630B/RW630LB) or white (PT-RZ670W/ RZ670LW/RW630W/RW630LW) cabinet.
Long-Lasting Reliability and High Picture Quality
Reliable drive system enables continuous 24/7 operation with no downtime.
Long-lasting brightness and low maintenance enable TCO (total cost of ownership)
to be reduced.
Laser light source and filter-less design allow maintenance-free operation for
25,000 hours*2
A new liquid cooling system maintains quiet, long-term, stable operation whilst
keeping the exhaust heat extremely low.
A filter-less, dust-resistant structure with an airtight optical block.
Detail Clarity Processor 3 gives natural clarity to even the finest details.
System Daylight View 2 enhances colour perception with no need to turn off the
lights.
Advanced technologies for excellent image quality including full 10-bit signal
processing.
DICOM Simulation mode reproduces easy-to-view rendering of X-ray photos. *3
Waveform Monitor for easy and precise calibration.
Expanding Installation Flexibility
Multi-Screen Support System: edge blending, colour matching and multi-screen
processor.
Multi-Unit Brightness Control function.
Flexible layout thanks to vertical and horizontal 360-degree installation.
Lens-centred design and a wide horizontal/vertical lens shift.
Geometric Adjustment for specially shaped screens. (PT-RZ670)
Optional Upgrade Kit ET-UK20 featuring Geometry Manager Pro for more flexible
geometric adjustment and modified masking functions. (PT-RZ670)
Optional ET-CUK10*4 Auto Screen Adjustment Upgrade Kit for automatic multiscreen projection setup. (PT-RZ670)
A wide selection of optional lenses including the ET-DLE030 ultra-short throw lens.
Professional System Integration
DIGITAL LINK transmits digital signals (HDMI, uncompressed HD video, audio, and
control signals) up to 100 m (328 ft) with a single CAT5e cable or higher.
Quick on/off: Image appears immediately and no need for cooling after use.
Shutter function with fade in/out effect.
No on/off cycle limitation
Art-Net*5 compatible.
Abundant terminals, including SDI (3G/HD/SD), DVI-D and HDMI inputs.
Optional: ET-YFB100G Digital Interface Box for single cable solution / ET-MWP100G
Multi Window Processor for multi-screen solution.
Multi Projector Monitoring and Control Software allows multiple projectors to be
managed together over a wired LAN or RS-232C.
Web Browser Control.
PJLinkTM compatible.
P-in-P function.
Scheduling function.
Optional Early Warning Software ET-SWA100 Series compatible.
Optional accessories SPECIFICATIONS (TENTATIVE)
Zoom lens
ET-DLE080
ET-DLE085
ET-DLE150
Model
PT-RZ670/RZ670L
120 V–240 V AC, 8.5–4 A, 50/60 Hz
820W (835VAat120V)
Power consumption
(0.4*6 W with LIGHT POWER set to ECO*7,4 W*6 with LIGHT POWER set to NORMAL.)
ET-DLE250
Panel size
ET-DLE350 Display method
DLPTM chip
ET-DLE450
Pixels
PT-RZ670/RW630
Fixed-focus lens
Lens
ET-DLE030
17.0 mm (0.67 in) diagonal (16:10)
Light source
Upgrade kit (PT-RZ670 only)
ET-UK20
(Geometry Manager Pro included)
Screen size (diagonal)
DLPTM chip × 1,
DLPTM projection system
DLPTM projection system
2,304,000 (1,920 × 1,200) pixels
1,024,000 (1,280 × 800) pixels
Powered zoom (1.7–2.4:1),
Powered zoom (1.8–2.5:1),
powered focus F 1.7–1.9, f 25.6 – 35.7 mm
powered focus F 1.7–1.9, f 25.6 – 35.7 mm
Optional powered zoom/focus lenses and fixed-focus lens
Laser diode
1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with the ET-DLE055, 2.54–8.89 m (100–350 in)with the ET-DLE030, 16:10 aspect ratio
Brightness*8
6,500 lm
Centre-to-corner uniformity*8
90%
Contrast*8
TBD
Resolution
Ceiling mount bracket
ET-PKD120H
(for high ceilings)
Scanning frequency
ET-PKD130H
(for high ceilings, with 6-axis adjustment)
16.5 mm (0.65 in) diagonal (16:10)
DLPTM chip × 1,
PT-RZ670L/RW630L
ET-DLE055
ET-CUK10
(Auto Screen Adjustment)
PT-RW630/RW630L
Power supply
1,280 × 800 pixels*9
1,920 × 1,200 pixels
-
SDI
-
HDMI/DVI-D
-
RGB
YPBPR (YCBCR)
3G-SDI*10/HD-SDI*11/SD-SDI*12
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 25–162 MHz
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 162 MHz or lower
fH: 15.75 kHz, fV: 60 Hz [480i (525i)], fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p], fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)], fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i], fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
ET-PKD120S
(for low ceilings)
ET-SWA100 Series
fH: 31.25 kHz, fV: 50 Hz [576p (625p)], fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i], fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p], fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p], fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
ET-PKD130B
(attachment for ceiling mount bracket)
Early Warning Software
fH: 15.63 kHz, fV: 50 Hz [576i (625i)], fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i], fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
-
Video/VC
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
V: +50 %, H: ±10 % (powered)
V: +60 %, H: ±10 % (powered)
V: +50 %, H: ±10 % (powered)
V: +60 %, H: ±10 % (powered)
Keystone correction range
V: ±40°*14/15, H: ±15°*16/17
V: ±40°*18
Keystone correction range with the
optional upgrade kit ET-UK20
V: ±40°*19/20, H: ±40°*20/21
Optical axis shift*13
Installation
SDI IN
Terminals
–
Vertical, horizontal and tilting 360-degree projection capable
BNC × 1 (3G/HD/SD-SDI)
–
HDMI IN
HDMI 19-pin × 1 (Deep Colour, compatible with HDCP)
DVI-D IN
DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB1 IN
BNC × 5 (RGB/YPBPR/YCBCR/video/YC × 1)
RGB2 IN
D-Sub HD 15-pin (female) × 1 (RGB/YPBPR/YCBCR × 1)
SERIAL IN
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
SERIAL OUT
D-sub 9-pin (male) × 1 for link control
REMOTE 1 IN
M3 × 1 for wired remote control
REMOTE 1 OUT
M3 × 1 for link control (for wired remote control)
REMOTE 2 IN
LAN / DIGITAL LINK
Dimensions (W × H × D)
Weight*23
Operation noise*8
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLinkTM, Deep Colour, compatible with
HDCP)
PT-RZ670/RW630: 498 × 200*22 × 588 mm (19-19/32 × 7-7/8*22× 23-5/32 in) (with supplied lens)
PT-RZ670L/RW630L: 498 × 200*22× 538 mm (19-19/32 × 7-7/8*22× 21-3/16 in) (without lens)
PT-RZ670/RW630: Approx. 23.0 kg (50.7 lbs) or less (with supplied lens);
PT-RZ670L/RW630L: approx. 22.0 kg (48.5 lbs) or less (without lens)
35 dB (LIGHT POWER mode: NORMAL)
Operating environment
TBD
Supplied accessories
Power cord with secure lock, wireless/wired remote control unit, batteries (R03/AAA type × 2), software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software)(× 1)
*1 For 1-chip DLPTM projectors, as of January 2014. *2 A guideline for light source replacement. The maintenance-free period may be shortened due to environmental conditions. *3 This product is not a medical instrument. Do not use it for actual
medical diagnosis. *4 Availability is limited to certain regions only. *5 Art-Net is a protocol for transmitting the lighting control protocol DMX512 over Ethernet. *6 In standard/graphic picture mode. Measured based on the power consumption rate
and a measurement method for the TV receiver. *7 When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *8
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *9 Input signals that exceed this resolution will be converted to 1,280 × 800 pixels. *10 SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10bit] 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, [YPBPR 4:2:2 10-bit] 1125 (1080)/60p, 1125 (1080)/50p. *11 SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit] 750 (720)/60p, 750 (720)/50p,
1125 (1035)/60i, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p. *12 SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 525i (480i), 625i (576i). *13 Optical axis shift cannot be operated with the ETDLE055/DLE030. *14 ±30° with the ET-DLE085/DLE055 and +5° with the ET-DLE030. *15 ±20° (±8° with the ET-DLE085/DLE055) when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function. *16 When using the
KEYSTONE corrections of the Geometric Adjustment function. *17 ±15° (±8° with the ET-DLE085/DLE055) when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function. *18 Not operable with the ET-DLE030. *19 Up to
a total of ±55° during simultaneous horizontal and vertical correction. *20 ±40° with the ET-DLE150/DLE250/supplied lens, ±22° with the ET-DLE085/DLE055 and +5° with the ET-DLE030. *21 ±15° with the ET-DLE085/DLE055 (±8° when using both
the KEYSTONE and CURVED corrections of the Geometric Adjustment function). *22 With legs at shortest position. *23 Average value. May differ depending on the actual unit.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on
region and country. This product may be subject to export control regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of
Texas Instruments. The projection distances and throw ratios given in this leaflet are for use only as guidelines. For more detailed information, please consult the
dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions
or registered trademarks. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries. All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2014 Panasonic Corporation. All rights reserved.
For more information about Panasonic projectors, please visit:
Projector Website – business.panasonic.co.uk/visual-system