B&B Electronics EIR-EXTEND-4 Datasheet
Add to My manualsadvertisement
◉
Touch to zoom
4 Port Industrial Ethernet Switch and Extender EIR-EXTEND-4 PRODUCT FEATURES • • • • • • • • The EIR-EXTEND-4 is a 4 port Ethernet switch and point-to-point Ethernet Extender designed to operate in harsh environments. Designed to operate at temperatures from -40 to 75° C, it has been tested for functional operation up to 85° C. Using existing copper wire runs, it allows the extension of Ethernet signals. The EIR-EXTEND-4 is the perfect solution for installing Ethernet connectivity on the factory floor. Used with a 2nd extender the configuration is easy. Configure one unit as the local device, and the other one as the remote device. External power supplies are required (not included). www.bb-elec.com | Complies with UL508 and NEMA TS1 & TS2 Environmental requirements for traffic control equipment Complies with IEC61000-6-2 EMC generic standard immunity for heavy industrial environment Redundant power inputs Wide operating temperature Extend Ethernet up to 6232 ft. (1.9 km) over standard copper wires Ethernet ports: 4 RJ-45 10/100Mbps Full/Half-duplex, Auto- negotiation / Auto-MDI/MDX Ethernet extend port: 1 RJ-11 and terminal block 50Mbps Full Duplex VDSL Port compatible with EIS-Extend, EIR-Extend, EIRM-Extend-x, EIRP-Extend Ordering Information Model Ethernet Number Ports EIR-EXTEND-4 DIN Rail Mount Ethernet Extender and switch Accessories MDR-40-24 - DIN Rail Power supply 24VDC 40 Watt C5UMB3FBL - 3 ft. (1 M) - Blue - Category 5e UTP Patch Cord EIR-EXTEND-4_2114ds 4 Port Industrial Ethernet Switch and Extender EIR-EXTEND-4 specifications Technology 802.3 10BaseT 802.3u 100BaseTx Standards 802.3x Ethernet over VDSL Transparent to higher level Protocol Protocols Half-duplex: backpressure Processing Full-duplex: 802.3x Power 48 VDC – Power Jack Input Voltage 24 - 48 VDC Terminal Block Power Consumption 8.4 W Max., 0.18A@48VDC Mechanical Case DIN Mount IP30 Aluminum 50mm (W) x 110mm (D) x 135mm (H) Dimensions (1.97” (W) x 4.33” (D) x 5.31” (H)) Weight 0.8 kg (1.76 lbs) Ethernet Interface 4 - RJ-45, 10/100BaseTX Full/Half Duplex Ports Auto-Negotiation Auto-MDI/MDX Speed 10/100 Mbps Distance 320 ft. (100 m) Cable CAT 5 Extender Interface Port One RJ-11 or Terminal Block Speed Up to 50 Mbps Distance Up to 6,232 ft. (1.9 km) 24 AWG Copper Pair (0.5mm diameter, 1 pair wire) Cable or larger, 100 Ohm Impedance Environment Operating Temperature -40 to 75° C (-40 to 167°F) Tested to 85° C Storage Temperature -40 to 85° C Operating Humidity 5% to 95% Non-condensing Mechanical Diagram EIRP-EXTEND-4 m n 11.0 cm 4.33 in EIRP-EXTEND-2 13.5 cm 5.31 in 5.00 cm 1.97 in EIRP-EXTEND-2 EIR-EXTEND-4 13.5 cm 5.31 in 11.0 cm 4.33 in 5.00 cm 1.97 in EIR-EXTEND-4 LEDS CHart LED Green 1 Amber Green 2 Amber Green 3 Amber Green 4 Amber 5 Green Amber 5.00 cm 1.97 in [email protected] [email protected] Distance 6,232m (1.9 km) 5,904m (1.8 km) 5,249m (1.6 km) 4,593m (1.4 km) 3,936m (1.2 km) 3,280m (1.0 km) 2,624m (0.8 km) 2,296m (0.7 km) 1,968m (0.6 km) 984m (0.3 km) Note: All speed selections are Symmetrical on DSL and Full-duplex on the Ethernet side. Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 FCC Part 15, Class A EN61000-6-4 EMI • EN55022 • EN61000-3-2 • EN61000-3-3 EN61000-6-2 • EN61000-4-2 (ESD Standards) - Contact: + / - 4KV; Criteria B - Air: + / - 8KV; Criteria B • EN61000-4-3 (Radiated RFI Standards) - 10V/m, 80 to 1000MHz; 80% AM Criteria A • EN61000-4-4 (Burst Standards) - Signal Ports: + / - 4KV; Criteria B - D.C. Power Ports: + / - 4KV; Criteria B EMS • EN61000-4-5 (Surge Standards) - Signal Ports: + / - 1KV; Line-to-Line; Criteria B - D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B • EN61000-4-6 (Induced RFI Standards) - Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A - D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - Criteria A • EN61000-4-8 (Magnetic Field Standards) - 30A/m @ 50, 60Hz; Criteria A • IEC60068-2-6 Fc (Vibration Resistance) - 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) Environmental • IEC60068-2-27 Ea (Shock) Test Compliance - 25g @ 11ms (Half-Sine Shock11.0 Pulse; cm Operation) in Storage/Transport) - 50g @ 11ms (Half-Sine Shock4.33 Pulse; EIRP-EXTEND • IEC60068-2-32 Ed (Free Fall) - 1M (3.281ft.) Installation: • DIN Rail (35mm) mount, Panel mount, or Rack mount with optional kit. 13.5 cm 5.31 in EIRP-EXTEND Speed 1 Mbps 3 Mbps 5 Mbps 10 Mbps 15 Mbps 20 Mbps 25 Mbps 30 Mbps 40 Mbps 50 Mbps 13.5 cm 5.31 in 5.00 cm 1.97 in 11.0 cm 4.33 in 11.0 cm 4.33 in International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
advertisement
Related manuals
advertisement