Hewlett Packard Enterprise MSA 450GB 12G SAS 15K SFF(2.5in) Dual Port Enterprise 3yr

QuickSpecs
HP MSA 2040 Storage
Overview
HP MSA 2040 Storage
HP MSA 2040, a high-performance storage array designed for entry-level HP customers desiring 8Gb/16Gb Fibre Channel,
1GbE/10GbE iSCSI, or 6Gb/12Gb SAS connectivity with 4 host ports per controller. The MSA 2040 Storage array provides an
excellent value for customers needing performance balanced with price to support initiatives such as consolidation and
virtualization.
The MSA 2040 delivers this performance by offering:







High performance controller architecture
4GB cache per controller
Four host ports per controller
Support for SSDs, Enterprise SAS HDDs, Midline SAS HDDs, and Self Encrypting Drives
SAN and SAS interfaces
Up to four (4) host ports per controller
Two new MSA 2040 Controllers:
o MSA 2040 SAN Controller
 8Gb/16Gb FC connectivity and/or
 1GbE/10GbE iSCSI connectivity
o MSA 2040 SAS Controller
 6Gb/12Gb SAS connectivity1
The HP MSA 2040 Storage ships standard with a license for 64 snapshots for increased data protection. There is also an optional
license for 512 snapshots. The HP MSA 2040 can also replicate data between arrays (P2000 G3, MSA 1040 SAN and/or MSA 2040
SAN Model only using FC or iSCSI protocol) with the optional Remote Snap feature (only available on linear storage).
What's New in the MSA 2040 array family

1
Introducing support for 12G Large Form Factor and Small Form Factor Hard Disk Drives
o HP MSA 1.8TB 12G SAS 10K SFF (2.5in) 512e Enterprise 3yr Warranty Hard Drive
o HP MSA 1TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
o HP MSA 2TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
o HP MSA 8TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
MSA 2040 SAS controllers require mini-SAS HD cables
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 1
QuickSpecs
HP MSA 2040 Storage
Overview
HP MSA 2040 Storage (SFF)
HP MSA 2040 Storage (LFF)
MSA 2040, 2 SAN controllers installed
1. Power supplies
2. 8 and/or 16Gb Fibre
Channel, 1 and/or 10GbE
iSCSI
3. CLI port (mini-USB)
4. Management Ethernet port
5. Expansion port
MSA 2040, 2 SAS controllers installed
1. Power supplies
2. 6Gb/12Gb mini-SAS HD
ports
3. CLI port (mini-USB)
4. Management Ethernet port
5. Expansion port
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 2
QuickSpecs
HP MSA 2040 Storage
Models
HP MSA 2040 Storage
Models
MSA 2040 Controller:
HP MSA 2040 SAN Controller
C8R09A
HP MSA 2040 SAS Controller
C8S53A
MSA 2040 Pre-Configured Models:
HP MSA 2040 SAN Dual Controller LFF Storage2
C8R14A
HP MSA 2040 SAN Dual Controller SFF Storage
3
C8R15A
4
C8S54A
HP MSA 2040 SAS Dual Controller LFF Storage
HP MSA 2040 SAS Dual Controller SFF Storage
C8S55A
5
MSA 2040 Array Bundles:
HP MSA 2040 SAN Dual Controller 24x900GB SAS 10K SFF HDD 21.6TB Bundle6
C8R17A
7
HP MSA 2040 SAN Dual Controller w/24 1.2TB 6G SAS 10K SFF HDD 28.8TB Bundle
C8R16A
8
C8S56A
HP MSA 2040 SAS Dual Controller w/24 900GB 6G SAS 10K SFF HDD 21.6TB Bundle
C8S57A
HP MSA 2040 SAS Dual Controller w/24 1.2TB 6G SAS 10K SFF HDD 28.8TB Bundle
9
Small Form Factor Pluggable (SFPs) Transceivers:
HP MSA 2040 8Gb Short Wave Fibre Channel SFP+ 4-pack Transceiver
C8R23A
HP MSA 2040 16Gb Short Wave Fibre Channel SFP+ 4-pack Transceiver
C8R24A
HP MSA 2040 10Gb Short Range iSCSI SFP+ 4-pack Transceiver
C8R25A
10
MSA 2040 Chassis:
MSA 2040 Controller-less Chassis (AC-powered)
HP MSA 2040 SFF Chassis11
C8R10A
HP MSA 2040 LFF Chassis
C8R12A
12
MSA 2040 Controller-less Chassis (DC-powered)
HP MSA 2040 SFF DC-power Chassis11
C8R11A
HP MSA 2040 LFF DC-power Chassis
C8R13A
12
Disk Enclosures:
HP MSA 2040 LFF Disk Enclosure
C8R18A
HP D2700 Disk Enclosure
AJ941A
2
Includes LFF Array Chassis + two MSA 2040 SAN controllers, no drives or SFPs are included
3
Includes SFF Array Chassis + two MSA 2040 SAN controllers, no drives or SFPs are included
Includes LFF Array Chassis + two MSA 2040 SAS controllers, no drives or host connect cables are included
4
5
Includes SFF Array Chassis + two MSA 2040 SAS controllers, no drives or host connect cables are included
6
Includes SFF Array Chassis + two MSA 2040 SAN controllers + 24 x 900 GB SFF SAS drives, no SFPs are included)
7
Includes SFF Array Chassis + two MSA 2040 SAN controllers + 24 x 1.2TB SFF SAS drives, no SFPs are included
8
Includes SFF Array Chassis + two MSA 2040 SAS controllers + 24 x 1.2TB SFF SAS drives
9
Includes SFF Array Chassis + two MSA 2040 SAS controllers + 24 x 900GB SFF SAS drives, no host connect cables are included
10
Customers must upgrade their MSA 2040 controller firmware to GL101 or later for iSCSI functionality
11
Will accept one or two MSA 2040 SAN or SAS controllers and can accommodate up to twenty four 2.5-in (SFF) drives
12
Will accept one or two MSA 2040 SAN or SAS controllers and can accommodate up to twelve 3.5-in (LFF) drives
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 3
QuickSpecs
HP MSA 2040 Storage
Models
MSA 2040 Drives:
Solid State Drives (SSDs) (SFF 2.5-inch)
12G SFF SAS SSDs
HP MSA 200GB 12G ME SAS SFF (2.5in) Enterprise Mainstream 3yr Warranty Solid
State Drive
K2Q45A
HP MSA 400GB 6G ME SAS 2.5in Enterprise Mainstream 3yr Wty Solid State Drive
J9F37A
HP MSA 800GB 6G ME SAS 2.5in Enterprise Mainstream 3yr Wty Solid State Drive
J9F38A
HP MSA 1.6TB 6G ME SAS 2.5in Enterprise Mainstream 3yr Wty Solid State Drive
J9F39A
SAS Drives (SFF 2.5-inch)
12G SFF 15K SAS HDDs
HP MSA 300GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F40A
HP MSA 450GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F41A
HP MSA 600GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F42A
6G SFF 15K SAS HDDs
HP MSA 146GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D54A
HP MSA 300GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S61A
12G SFF 10K SAS HDDs
HP MSA 300GB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F44A
HP MSA 600GB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F46A
HP MSA 900GB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F47A
HP MSA 1.2TB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F48A
HP MSA 1.8TB 12G SAS 10K SFF (2.5in) 512e Enterprise 3yr Warranty Hard Drive
J9F49A
NOTE: 512e drives require MSA 1040/2040 firmware version GL200P002 or newer
6G SFF 10K SAS HDDs
HP MSA 300GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D55A
HP MSA 450GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D56A
HP MSA 600GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S58A
HP MSA 900GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
HP MSA 900GB 6G SAS 10K SFF(2.5in) Enterprise Self Encrypted 3yr Wty Hard Drive
HP MSA 1.2TB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S59A
13
G0M43A
E7W47A
12G SFF 7.2K SAS MDL HDDs
HP MSA 1TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
J9F50A
HP MSA 2TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
J9F51A
NOTE: 512e drives require MSA 1040/2040 firmware version GL200P002 or newer
6G SFF 7.2K SAS MDL HDDs
13
HP 900GB Self-Encrypted Drive is supported in a D2700 only when attached to a MSA 2040 as expansion
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 4
QuickSpecs
HP MSA 2040 Storage
Models
HP MSA 1TB 6G SAS 7.2K SFF (2.5-inch) Dual Port Midline 3yr Warranty Hard Drive
C8S62A
SAS Drives (LFF 3.5-inch)
12G LFF 7.2K SAS Midline Drives
HP MSA 8TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
M0S90A
HP MSA 6TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
J9F43A
HP MSA 4TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
K2Q82A
NOTE: 512e drives require MSA 1040/2040 firmware version GL200P002 or newer
6G LFF 7.2K SAS Midline Drives
HP P2000 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port MDL Hard Drive
AP861A
HP P2000 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port MDL Hard Drive
AW555A
HP P2000 3TB 6G SAS 7.2K LFF (3.5- inch) Dual Port MDL 1yr Warranty Hard Drive
QK703A
HP MSA 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
C8R26A
HP MSA 6TB 6G SAS 7.2K 3.5in Midline 1yr Warranty Hard Drive
J9F36A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 5
QuickSpecs
HP MSA 2040 Storage
Models
12G LFF 15K SAS HDDs (SFF Drives in LFF Converters)
HP MSA 300GB 12G SAS 15K LFF (3.5in) Converter Enterprise 3yr Warranty Hard
Drive
J9V68A
HP MSA 450GB 12G SAS 15K LFF (3.5in) Converter Enterprise 3yr Warranty Hard
Drive
J9V69A
HP MSA 600GB 12G SAS 15K LFF (3.5in) Converter Enterprise 3yr Warranty Hard
Drive
J9V70A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 6
QuickSpecs
HP MSA 2040 Storage
Features
HP MSA 2040
Carrier-Grade
Components (NEBS)
The HP MSA 2040 Storage arrays (SAN or SAS Controllers) connected 2U storage area
network (SAN) or direct connect solution designed for network equipment providers
(NEPs) and communication service providers. Suited for those who need a robust
telecom infrastructure.
The HP MSA 2040 Carrier-Grade Chassis (C8R11A) is a controller-less 6Gb chassis
capable of supporting one or two MSA 2040 SAN Controller (C8R09A) or MSA 2040
SAS Controller (C8S53A) and has twenty-four Small Form Factor (SFF) drive bays. It
comes equipped with two DC-power power supplies.
The HP P2000 2.5-in Dual I/O JBOD (BV921B) is a special model disk enclosure
designed for use with NEBS compliant MSA 2040 configurations. This drive enclosure
has 24 drive bays (unlike the D2700 with 25 drive bays) and has dual DC-power
supplies. It is only sold with a carrier grade arrays.
The NEBS compliant MSA 2040 supports configurations with up to 7 compliant disk
enclosures for a maximum of 192 SFF HDD´s.
When used in conjunction with specific Storage SFF SAS drives, the solution is NEBS
certified (GR-63 and GR-1089) and Seismic Zone 4 rated. NEBS level-3 certification
provides the assurance that the equipment is safe to operate and sturdy enough to
withstand certain physical and environmental (for example, fire, earthquakes)
conditions. For Seismic Zone 4 rating, the MSA 2040 must be mounted in an HP
Seismic Rack (AH335A).
P2000 DC-power Carrier-grade SFF Chassis
HP MSA 2040 SFF DC-power Chassis
14
SKU
C8R11A
MSA 2040 Controller:
HP MSA 2040 SAN Controller15
C8R09A
HP MSA 2040 SAS Controller15
C8S53A
SFF Carrier-grade (only) DC-power JBOD
HP P2000 Dual I/O DC-power Carrier-Grade SFF Drive Enclosure15
BV921B
HP MSA 2040 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and
HP MSA SFF Hard Disk Drives
MSA 2040 Drives:
Solid State Drives (SSDs) (SFF 2.5-inch)
HP MSA 200GB 6G SAS Main End SFF(2.5in) Ent Mainstream 3yr Wty Solid State Drive
C8R19A
HP MSA 400GB 6G SAS Main End SFF(2.5in) Ent Mainstream 3yr Wty Solid State Drive
C8R20A
HP MSA 800GB 6G SAS Main End SFF(2.5in) Ent Mainstream 3yr Wty Solid State Drive
C8R21A
14
NEBS Certified
15
24-drive SFF bays, NEBS certified, only sold with carrier-grade arrays
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 7
QuickSpecs
HP MSA 2040 Storage
Features
SAS Drives (SFF 2.5-inch)
HP MSA 146GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D54A
HP MSA 300GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S61A
HP MSA 300GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D55A
HP MSA 450GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D56A
HP MSA 600GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S58A
HP MSA 900GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S59A
HP MSA 1TB 6G SAS 7.2K SFF (2.5-inch) Dual Port Midline 3yr Warranty Hard Drive
C8S62A
For more information on HP Carrier Grade Platforms go to
http://www.hp.com/products1/servers/carrier_grade/index.html?jumpid=
reg_R1002_USEN
All MSA 2040 models offer a common set of valuable features:


MSA 2040 controller architecture which maximizes performance
o Four host ports per controller
 MSA 2040 SAN controller supports 8Gb FC, 16Gb FC, 1GbE iSCSI or 10GbE iSCSI SFPs.
 MSA 2040 SAS controller supports 6Gb and 12Gb SAS host connectivity using mini-SAS HD Cables.
o 4 GB transportable read/write cache per controller.
o Battery-free cache backup with super capacitors and compact flash
MSA 2040 SAN Controller allows customers to create their own Combo Controller by mixing FC and iSCSI SFPs. Below are
the valid configurations for mixing SFPs:
Configuration Table for mixing SFPs
Configuration
Controller
Host Port 1 SFP1
Host Port 2 SFP1
Host Port 3 SFP2
Host Port 4 SFP2
Table for mixing
SFPs
Controller A
16Gb FC
16Gb FC
None
None
16Gb FC
16Gb FC
8Gb FC
8Gb FC
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
None
None
16Gb FC
16Gb FC
8Gb FC
8Gb FC
8Gb FC
8Gb FC
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 8
QuickSpecs
HP MSA 2040 Storage
Features
10GbE iSCSI
1GbE iSCSI
Dual Controller
1GbE iSCSI
1GbE iSCSI
None
None
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
None
None
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
10GbE iSCSI
1GbE iSCSI
N/A
N/A
N/A
N/A
Controller A
16Gb FC
16Gb FC
None
None
16Gb FC
16Gb FC
8Gb FC
8Gb FC
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
None
None
16Gb FC
16Gb FC
8Gb FC
8Gb FC
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
None
None
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
None
None
10GbE iSCSI
10GbE iSCSI
1GbE iSCSI
1GbE iSCSI
Match Controller A
Match Controller A
10GbE iSCSI
1GbE iSCSI
Controller B
2
10GbE iSCSI
Controller B
8Gb FC
1
10GbE iSCSI
Match Controller A
8Gb FC
10GbE iSCSI
1GbE iSCSI
Match Controller A
SFP in Host Port 1 must match SFP in Host Port 2
SFP in Host Port 3 must match SFP in Host Port 4
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 9
QuickSpecs
HP MSA 2040 Storage
Features
All MSA 2040 models offer a common set of valuable features:
(NOTE: Customers must upgrade their MSA 2040 controller firmware to GL101 or later for iSCSI functionality
Customers must upgrade their MSA 2040 controller firmware to GL105 or later for Self-Encrypting Drive functionality
Customers must upgrade their MSA 2040 controller firmware to GL200 or later for MSA virtualizations features)

















MSA 2040 supports SSD drives which allow IT managers to boost IOPS performance.
Automated Sub-Lun Tiering. The MSA 2040 can manage up to three tiers of storage: Performance tier, Standard tier and
Archive tier. This feature is available with GL200 firmware or newer and the Performance tier requires a license.
SSD Read Cache to improve random read performance.
MSA 2040 supports Self-Encrypting Drives (SED) to allow customers to secure their critical data and comply with all
required regulatory mandates.
Simple storage management including an intuitive browser-based user interface.
Storage Management Utility V3 (SMU). This new MSA management GUI brings a new modern look and feel to array
management. SMU V3 available with GL200 firmware or newer. Existing MSA customers can choose to use the new SMU V3
or to continue to use the previous generation SMU V2 if new virtualization features are not required.
Thin Provisioning allows storage allocation of physical storage resources only once they are consumed by an application.
Thin Provisioning also allows over-provisioning of physical storage pool resources allowing ease of growth for volumes
without predicting storage capacity upfront. Thin Provisioning is available with GL200 firmware or newer.
MSA 2040 comes standard with 64 controller-based snapshots and clone capability (volume copy is only available on
linear storage). Arrays also support an optional 512 snaps. Choose either a low-cost single controller array or start with a
configured dual controller array model to fit the budget, high availability, and performance needs.
All models feature a wide variety of drives: High-performance SSD drives, enterprise-class SAS, SED and SAS Midline
drives.
The MSA 2040 will support a maximum of 7 disk enclosures (either LFF and/or SFF). Add-on enclosures can either be
D2700 Small Form Factor (SFF) drive enclosures or MSA 2040 Large Form Factor (LFF) disk enclosures. The array can grow
incrementally from a few drives to 96 LFF or 199 SFF drives.
Disks Groups can be spanned across multiple enclosures RAID levels 1, 5, 6, 10. Linear Vdisks support RAID levels 0, 1, 3, 5,
6, 10, 50.
Maximum hard drive counts vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 0, 3, 5, 6, and
10; max of 32 drives for RAID level 50. With GL200 or newer firmware multiple Disk Groups can be aggregated into a
Storage Pool.
The maximum LUN size is 128TB
Storage Pools allow data on a given LUN to span across all drives in a pool. When capacity is added to a system, the user is
also getting a performance benefit of the additional spindles –hence the term Wide Striping. Storage Pools are available
with GL200 firmware or newer.
Snapshot enhancements for virtual storage, including performance improvements, hierarchical snapshots, and simplified
resource management.
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)
Upgradable by design. Owners of an MSA P2000 G3 and an MSA 1040 array are able to do data-in-place controller
upgrades to the new MSA 2040 array. This unique ability protects the earlier investments in drives, and JBODs.
(NOTE: Certain limitations are applicable- please review MSA2040 Upgrade Technical Whitepaper
(http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=4AA4-6830ENW)before upgrading your P2000 G3/MSA
1040 systems)
Follow us on twitter and be a part of the conversation, and get the latest MSA related news and information at:
http://www.twitter.com/MSAstorage
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 10
QuickSpecs
HP MSA 2040 Storage
Features
Application Solutions
The HP MSA 2040 Storage is the ideal solution for customers running Oracle, Microsoft, SAP
environments and those customers who are deploying virtual server technologies like VMware and
Hyper-V. The MSA 2040 delivers enterprise functionality that enhances virtual environments,
simplifies management, and reduces costs. Easy to deploy, scale and maintain, HP MSA 2040 Arrays
ensure that crucial business data remains available.
HP has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor
technology through extensive testing with the HP MSA 2040, HP servers, and management software;
high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft,
and SAP application platforms. As a result, our customers can expect a wide range of operational and
business benefits where they can:




Learn more
Deploy IT assets across multiple locations.
Incrementally grow storage without interruption.
Enable high availability and disaster recovery capabilities for critical applications.
Deploy a remote disaster recovery site.
To learn more about specific HP Storage Solutions that are built with Oracle, Microsoft, SAP and
Virtualization environments in mind, visit the solution sites supporting each of these applications.
HP MSA Storage hyperlink to: www.hp.com/go/MSA
HP Storage for Oracle hyperlink to: http://www.hp.com/storage/oracle
HP Storage for Microsoft hyperlink to: http://www.hp.com/storage/microsoft
HP Storage for SAP hyperlink to: http://www.hp.com/storage/sap
HP Storage for VMware hyperlink to: http://www.hp.com/go/vmware/storage
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 11
QuickSpecs
HP MSA 2040 Storage
Family Information
MSA 2040
Capacity
Single Enclosure and
Maximum Additional Drive
Enclosures
LFF:
96 TB (single LFF array-head -using 12 x 8TB LFF SAS MDL drives)
768 TB (by adding 7 LFF Disk Enclosures behind LFF Array & using 8TB LFF SAS MDL drives)
SFF:
43 TB (single SFF array-head - using 24 x 1.8TB SFF SAS drives)
358 TB (by adding 7 SFF Disk Enclosures behind SFF Array & using 1.8TB SFF SAS drives)
NOTE: maximum available storage capacity depends on the RAID level being implemented
Controller Cache
4 GB per controller
Total LUNs
(LUN size are dependent
of the storage
architecture: Linear vs.
Virtualized)
512
maximum LUN size: 128TB
Thin Provisioning allows you to create the LUNs independent of the physical storage
Host Interconnect
MSA 2040 SAN controller will support up to four connections with options of 16Gb, 8Gb FC and 10GbE,
1GbE iSCSI per controller. See table above for valid configuration table.
MSA 2040 SAS controller will support up to four 6Gb/12Gb SAS connections per controller using miniSAS HD cables
Maximum Drives
w/ expansion
96 LFF/199 SFF
Maximum host supported
64 in v2 UI
512 in v3 UI
Standard Software:
Snapshot, 64 (snaps)
Optional Software
Remote Snap (linear storage only)
Max Snapshot (512)
Performance Tiering
Product Technology
MSA 2040 SAN
controller
MSA 2040 SAN controller supports 8Gb FC, 16Gb FC, 1GbE iSCSI or 10GbE iSCSI SFPs.
MSA 2040 SAS
controller
MSA 2040 SAS controller supports 6Gb and 12Gb SAS host connectivity using mini-SAS HD cables.
Modular Chassis
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SSD (available
only for Small Form Factor), SAS, SEDs and SAS Midline drives. Comes with space for one or two controllers
Drives available
The MSA 2040 controllers support both the MSA 3.5-inch Large Form Factor (LFF) drives, and the MSA 2.5inch Small Form Factor (SFF) drives.



Solid State Drives (SSDs) deliver exceptional performance for applications requiring high random
read IOPs performance (available only for Small Form Factor).
Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24x7 usage.
SAS Midline drives are usually reserved for archival of data as they are relatively inexpensive and
are available in very large capacities.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 12
QuickSpecs
HP MSA 2040 Storage
Family Information

Optional Disk
Enclosures
Self-Encrypting Drives (SEDs) are designed to safeguard critical personal and business information
and to comply with Regulatory Mandates
Just as the user has a choice of chassis for the array head (LFF and SFF drive bays, AC or DC powered), so
also do they have a choice of expansion disk enclosures accommodating either drive size. Both the MSA
2040 and the D2700 disk enclosures can be hot-added to an operating array. SFF and LFF Array heads and
Disk Enclosures can be mixed without limitations.
MSA 2040 3.5-inch Disk Enclosure. This 2U unit has twelve LFF (3.5-inch) drive bays and accepts for MSA
dual-ported SAS, SEDs and SAS MDL drives. The pre-configured HP MSA 2040 LFF Drive Enclosure (C8R18A)
has two I/O modules and supports both single and dual controller arrays.




This 3.5-inch MSA disk enclosure can be attached to MSA 2040 LFF or SFF array head.
Each configured model ships standard with two .5m mini-SAS to mini-SAS cables for connection to
the MSA 2040 array expansion port or existing disk enclosure cascade port.
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures
The MSA 2040 does not support LFF SATA HDDs.
D2700 2.5-inch Disk Enclosure. This 2U storage enclosure (AJ941A) is designed to support twenty five HP
Storage or ProLiant 2.5-inch Universal form factor (SFF) 12Gb, SSD, SAS, SEDs or SAS MDL hard drives. It
ships standard with dual I/O modules installed.




Scalability
This 2.5-inch D2700 disk enclosure can be attached to MSA 2040 LFF or SFF array head
The D2700 enclosure ships with a two .5m mini-SAS to mini-SAS cables for connection to the MSA
2040 array expansion port or existing disk enclosure cascade port.
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures.
The MSA 2040 does not support SFF SATA HDDs.
The MSA 2040 array configurations are designed to allow an installation to begin with smaller capacity and
be able to grow gradually as needed. The flexibility of SSD, SAS or SAS MDL drives technology, form factors,
sizes, speeds, and costs per GB allows a system to easily fit in almost any budget.



Large Form Factor configurations can scale up to 72 TB SAS MDL, expandable to 576 TB SAS MDL
with the addition of a maximum of seven MSA 2040 3.5-inch Disk Enclosures.
Small Form Factor configurations can scale from 28.8 TB SAS. With the addition of seven D2700
JBODs, the MSA 2040 storage can support 238TB SAS.
Users may configure a 24-drive MSA 2040 array head with 12-drive LFF MSA 2040 3.5-inch disk
enclosures. This is an excellent option for a configuration that supports high-speed SFF SSDs or
fast SFF enterprise-class SAS drives in the array head, combined with economical LFF drives
staged for archival purposes, all in the same array.
Vdisks
The Vdisk nomenclature is being replaced by Disk Group. In the Linear Storage and in the SMU V2 you will
see reference to Vdisk in Linear Storage and the SMU V3 you will see Disk Group. Vdisk and Disk Group are
essentially the same. Vdisks have additional RAID types (RAID 0, 3) not available only in the CLI.
Disk Group
A Disk Group is a collection of disks in a given redundancy mode (RAID 1, 5, 6, 10, 50). It is equivalent to a
Vdisk in Linear Storage and utilizes the same proven fault tolerant technology used by Linear Storage. Disk
Group RAID level and size can be created based on performance and/or capacity requirements. With GL200
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 13
QuickSpecs
HP MSA 2040 Storage
Family Information
or newer firmware multiple Disk Groups can be allocated into a Storage Pool for use with the Virtual
Storage features.
LUNs
The MSA 2040 arrays support 512 volumes and up to 512 snapshots in a system. All of these volumes can
be mapped to LUNs. Maximum LUN sizes up to 128 TB, the LUNs size are dependent on the storage
architecture: Linear vs. Virtualized. Thin Provisioning allows the user to create the LUNs independent of the
physical storage.
Storage Pools
The GL200 firmware or newer introduces Storage Pools – which are comprised of one or more Disk Groups.
LUNs are no longer be restricted to a single Vdisk as with Linear Storage. A volume’s data on a given LUN
can now span all disk drives in a pool. When capacity is added to a system, users will benefit from the
performance of all spindles in that pool.
Leveraging Storage Pools, the MSA 2040 supports large, flexible Volumes with sizes up to 128TB and
facilitates seamless capacity expansion. As volumes are expanded data automatically reflows to balance
capacity utilization on all drives.
RAID 0, 1, 3, 5, 6, 10, In addition to the usual RAID levels, the MSA 2040 features several important additional levels. RAID 6
50
offers the highest level of RAID protection. It allocates two sets of parity data across drives and allows
simultaneous write operations. It can withstand two simultaneous drive failures without downtime or data
loss. RAID 10 is mirroring and striping without parity and allows large Disk Groups to be created with high
performance and mirroring for fault tolerance. RAID 50 combines the block striping and parity of RAID 5
with the straight block striping of RAID 0, yielding higher performance than RAID 5 through the addition of
RAID 0, particularly during writes.
Performance
The performance figures provided here are for reference as many variables exist between array
configurations, workloads, hard drive types, disk group setup parameters and host system setup. All
performance information is measured using Linear Storage
HP has traditionally published a set of end-to-end MSA performance specifications which feed into HP Sizer
tools which are based on conservative real-world configurations. For consistency, the MSA 2040
performance numbers have been documented in both Benchmark and End-to-End Performance tables.
Configuration details are provided for both test scenarios. These numbers are preliminary and subject to
change without notice.
Benchmark Performance Results:
MSA 2040 Array Performance
HP MSA 2040
Converged SAN Controller
with HDD
HP MSA 2040
Converged SAN Controller
with SSD
16 Gb
Fibre Channel
16 Gb
Fibre Channel
Protocol (host connect)
MSA 2040 RAID 10 Performance Results1
Random Reads
IOPS
Random Writes
IOPS
MSA 2040 RAID 1 SSD Performance Results2
52,000
25,500
Random Reads
IOPS
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
85,000
Page 14
QuickSpecs
HP MSA 2040 Storage
Family Information
Random Writes
IOPS
MSA 2040 RAID 5 Performance Results3
IO Meter Sequential Reads
MB/s4
IO Meter Sequential Writes
MB/s4
32,000
6,310
4,800
Benchmark Setup Configurations
1). Dual Controller configuration, RAID: 10, block size: 8k, queue depth: 128 per LUN, (192) HDDs, 96 15k
HDD + 96 10k HDD, 12 HDDs per vdisk, Win 2008 host: DL380pG8, (4) 16Gb FC direct connect to array
2). Dual Controller configuration, RAID: 1, block size: 8k, queue depth: 64 per LUN, (4) Enterprise
Mainstream SSDs, 2 SSDs per vdisk, Win 2008 host: DL380pG8, (2) 16Gb FC direct connect to array
3). Dual Controller configuration, RAID: 5, block size: 256k, queue depth: 16 per LUN, (72) 10k 300GB HDD,
12 HDDs per vdisk, Win 2008 host: DL380pG8, (4) 16Gb FC direct connect to array
4). Sequential numbers are obtained using a single volume per vdisk and single sequential workload
generated through the IO Meter performance software
End-to-End Performance Figures:
Guarantee Performance numbers are a guideline as established by tests using RAW I/O in an Operating
System Agnostic test lab environment.
HP MSA
HP MSA
HP MSA
HP MSA
HP MSA
HP MSA
HP MSA
HP MSA
2040
2040
2040
2040
2040
2040
2040
2040
Converged Converged Converged Converged Converged Converged Converged Converged
MSA 2040
SAN
SAN
SAN
SAN
SAN
SAN
SAS
SAS
Array
Controller Controller Controller Controller Controller Controller Controller Controller
Performance With HDD5 With SSD6 With HDD5 With SSD6 With HDD5 With SSD6 With HDD5 With SSD6
Protocol
16 Gb
16 Gb
(host
Fibre
Fibre
10GbE
10GbE
1GbE
1GbE
8
connect)
Channel Channel
iSCSI
iSCSI
iSCSI
iSCSI
MSA 2040 RAID 10 Performance Results **NOTE: RAID 1 was used for SSD testing
Random
Reads
IOPS
Random
Writes
IOPS
Random Mix
60/40
IOPS
Sequential
Reads
12Gb8
SAS
12Gb8
SAS
49,000
75,000
48,800
82,000
45,800
76,300
48,500
86,400
27,200
29,500
27,400
31,500
27,900
31,300
28,600
32,200
36,000
44,100
36,000
47,600
37,300
46,800
38,900
48,300
4,680
2,990
860
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
4,720
Page 15
QuickSpecs
HP MSA 2040 Storage
Family Information
MB/s7
Sequential
Writes
MB/s7
2,260
1,860
840
MSA 2040 RAID 5 Performance Results **NOTE: RAID 1 was used for SSD testing
Random
Reads
IOPS
49,000
75,000
47,700
80,100
44,500
73,500
Random
Writes
IOPS
14,800
16,500
14,600
16,800
14,700
16,800
Random Mix
60/40
IOPS
23,000
29,000
24,200
29,800
23,700
29,400
Sequential
Reads
MB/s7
4,680
2,880
860
Sequential
Writes
MB/s7
3,620
2,450
850
MSA 2040 RAID 6 Performance Results **NOTE: RAID 1 was used for SSD testing
1,730
47,400
85,300
15,300
17,000
24,900
30,100
4,390
3,160
Random
Reads
IOPS
49,000
75,000
47,600
80,000
44,400
72,700
47,400
Random
Writes
IOPS
11,350
13,600
11,000
14,000
11,400
13,700
11,500
Random Mix
60/40
IOPS
18,700
25,300
18,900
26,000
19,000
25,700
19,400
Sequential
Reads
MB/s7
4,600
2,990
860
4,430
Sequential
Writes
MB/s7
3,500
2,470
790
2,870
Refer to the paper titled "Upgrading to the HP MSA 2040", available in the Resource Library at:
www.hp.com/go/msa2040.
84,100
13,900
25,900
5). For MSA 2040 Hard Disk Drive (HDD) results, 146 GB 15K SAS drives were used in a dual controller
configuration of 16 vdisks consisting of twelve disks per vdisk, 1.6 TB volumes, and 4 volumes per host. 4
hosts directly attached to the HP MSA 2040 array were used in this test configuration (results cannot be
expected with a single host).
NOTE: MSA 2040 tests with 1GbE iSCSI used 8 hosts directly attached to the HP MSA 2040 array.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 16
QuickSpecs
HP MSA 2040 Storage
Family Information
6). For MSA 2040 Solid State Drives (SSD) results, 200 GB Enterprise Mainstream SSDs were used in a dual
controller configuration of 4 vdisks consisting of two disks per vdisk, 200 GB volumes, and 1 volume per
host. 4 hosts directly attached to the HP MSA 2040 array were used in this test configuration (results
cannot be expected with a single host).
NOTE: MSA 2040 tests with 1GbE iSCSI used 8 hosts directly attached to the HP MSA 2040 array.
7). Sequential tests results were achieved with 256K block sizes and random tests were based on 8K block
sizes.
NOTE: For sequential workloads with a queue depth greater than 1, each sequential stream is targeted to
operate on a separate LBA range. Other types of sequential workloads that target specific LBA ranges may
achieve higher results
8). All SAS results were measured using 6Gb SAS Host Bus Adapters.
9). All Fibre Channel results were measured using 16Gb FC Host Bus Adapters. All SAS results were
measured using 6Gb SAS Host Bus Adapters. All 10GbE iSCSI results were measured using 10GbE iSCSI Host
Bus Adapters. All 1GbE iSCSI results were measured using 1GbE network interface controllers (NICs).
NOTE: Number and type of applications, drive type and number of drives, operating system used, and the
number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison.
NOTE: These numbers reflect a full array configuration with the maximum number of front-end ports,
disks, and controllers. The test results shown for the HP MSA 2040 are designed to give a conservative
reference point for comparisons.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 17
QuickSpecs
HP MSA 2040 Storage
Family Information
DC-power chassis
HP is making the two models of controller-less chassis available with direct current (DC) power supplies.
They each have the two empty bays where users can insert one or two MSA 2040 controller(s).
The 500 watt power supply is designed to operate over the input range of -40VDC to -75VDC.
MSA 2040 Controller-less Chassis (DC-powered)
HP MSA 2040 SFF DC-power Chassis
C8R11A
(Will accept one or two MSA 2040 SAN or MSA 2040 SAS controllers and can
accommodate up to twenty four 2.5-in (SFF) drives)
HP MSA 2040 LFF DC-power Chassis
C8R13A
(Will accept one or two MSA 2040 SAN or MSA 2040 SAS controllers and can
accommodate up to twelve 3.5-in (LFF) drives)
Configuration and
Management Tools
MSA 2040 Software
and Documents
Support CD
HP Storage Management Utility (SMU). Management access, out-of-band: WEB GUI, CLI. Interface Types:
USB 100/1000 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP, HTTP, Telnet



Hot Plug Expansion
and Replacement
Support
All product documentation (CD can be used on ALL supported server Operating Systems.)
Host Software Bundles (Win and Linux for both ProLiant x86, ProLiant x64 and Integrity
IA64servers)
CD updated quarterly on HP.com with sustaining firmware updates
All MSA 2040 models support hot plug expansion and replacement of redundant controllers, enclosures,
fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of
disk enclosures is also supported.
Snapshot and Clone All MSA 2040 arrays come standard with 64 snaps, 512 snaps is available as an option. This controller
based functionality offers higher levels of data protection, enables an almost instant recovery from data
failure or corruption and offers alternative development testing of 'offline' production data and the ability
to backup snapped/cloned data.
Overview
The MSA 2040 arrays come integrated with web browser and CLI based software for storage and RAID
management, setup, configuration, and troubleshooting. This reduces the cost of ownership by
reducing the training and technical expertise necessary to install and maintain your HP storage
solution.
The SPOCK database provides interoperability information for thousands of components and millions of
component combinations. It is available to all users at http://www.hp.com/storage/spock.
Server Compatibility
NOTE: depends on
protocol
Industry Standard
servers support
Supports most HP ProLiant, BladeSystems and Integrity servers including




HP ProLiant DL, ML
HP c-Class Blade Servers
Integrity servers, IA64
Compatibility must be confirmed at: http://www.hp.com/storage/spock

Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server
Catalog.
Refer to the Microsoft website: http://www.microsoft.com/windows/catalog/server/
HP recommends that the Third-Party Server Vendor is an active member of TSANet. Refer to


c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 18
QuickSpecs
HP MSA 2040 Storage
Family Information

OS Support
NOTE: depends on
protocol
Web Browser support
the TSANet website for details: www.tsanet.com
Non-HP servers will generally be supported if the HP storage stack is used. This includes
supported HP branded HBAs and drivers, and supported FC switches.
Refer to the HP support statements for complete current OS version support: http://www.hp.com/storage/spock






Microsoft Windows Server 2012
Microsoft Windows Server 2008 R2
VMware
HP-UX
Red Hat Linux (32/64)
SuSE SLES (32/64)

The MSA 2040 supports target based management, and include a Web interface and a telnet
interface, and require a web browser for management.
Beginning with GL200 or newer firmware, MSA 2040 customers have the option to use one of
two WBI´s.
Users taking advantage of virtualization features will be required to use SMU V3.
The MSA 2040 management supports Microsoft Internet Explorer, Mozilla Firefox, and Google
Chrome.



c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 19
QuickSpecs
HP MSA 2040 Storage
Optional Software
MSA
Performance
Tiering
Disk tiers are comprised of aggregating 1 or more Disk Groups of similar physical disks. The MSA 2040 supports 3
distinct tiers:
1.
2.
3.
A Performance tier with SSDs
A Standard SAS tier with Enterprise SAS HDDs
An Archive tier utilizing Midline SAS HDDs.
Prior to GL200 firmware the MSA 2040 operated through manual Tiering, LUN-level tiers are manually created and
managed by using dedicated vdisks and volumes. LUN level Tiering requires careful planning such that
applications requiring the highest performance be placed on Vdisks utilizing high performance SSD´s. Applications
with lower performance requirements can be placed on Vdisks comprised of Enterprise SAS or midline SAS HDDs.
Beginning with GL200 or newer firmware, the MSA 2040 now supports sub-LUN tiering and automated data
movement between tiers.
The MSA 2040 automated tiering engine moves data between available tiers based on the access characteristics
of that data. Frequently accessed “pages” will migrate to the highest available tier delivering maximum I/O´s to
the application (Performance Tiering). Another feature to the MSA 2040 tiering engine is Archive Tiering where
“cold” or not frequently accessed data can be moved to lower performance tiers. Pages are migrated between
tiers automatically such that I/O’s are optimized in real-time.
The Archive Tiering functionality is provided at no charge on the MSA 2040 platform beginning with GL200 or
newer firmware. The Performance Tiering capability utilizing a fault tolerant SSD Disk Group is a paid feature and
requires the below SKU to enable it. Performance Tiering from SAS MDL (Archive Tier) to Enterprise SAS(Standard
Tier) drives is provided at no charge.
HP MSA 2040 Perf Auto Tiering LTU
HP MSA 2040 Perf Auto Tiering E-LTU
D4T79A
D4T79AAE
VMware Site Recovery Manager (SRM)
VMware Site
Recovery
VMware vCenter Site Recovery Manager (SRM) is an extension to VMware vCenter that delivers businessManager(SRM)
continuity and disaster-recovery solution that helps you plan, test, and execute the recovery of vCenter virtual
machines. SRM can discover and manage replicated datastores, and automate migration of inventory from one
vCenter to another. Site Recovery Manager integrates with the underlying replication product through a Storage
Replication Adapter (SRA). The SRM is available only for linear storage.
HP MSA 2040 Site Recovery Adapter (SRA)
The MSA 2040 SRA, a free-to-use plugin, is the program that integrates the VMware vCenter SRM with HP MSA
2040 arrays. It enables full-featured use of the VMware SRM. It is a host-software component installed on a
Microsoft Windows Server that enables disaster recovery management (DRM) software on the host to
communicate and control certain aspects of the replication feature in storage systems connected to the server. It
allows the VMware SRM software to automatically coordinate virtual machine failover and failback between a
protected data center and a disaster recovery site by employing a disaster recovery solution called Remote Snap.
A perfect combination of the Remote Snap replication and VMware SRM provides an unfailing automated solution
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 20
QuickSpecs
HP MSA 2040 Storage
Optional Software
for implementing and testing the disaster recovery between sites located across geographies. It enables
communication between the HP MSA Remote Snap replication functionality that is embedded in HP MSA 2040
systems. Users are required to acquire Remote Snap license for their local and remote HP MSA 2040 arrays to use
the HP MSA SRA.
Site Recovery Manager Requirements/Dependencies:





HP OneView
for VMware
vCenter
Requires vSphere 5.1, 5.5
Supports SRM 5.1, 5.5 and 5.8
Requires HP MSA 2040 /P2000 SRA 5.8 or later Plug-in (downloadable from Hp.com)
SRM works with Remote Snap linear mode
Requires purchase of MSA 2040 Remote Snap licenses (one for each site)
HP OneView for VMware vCenter
HP OneView for VMware vCenter is a component within the HP OneView plug-in for vCenter. It provides VMware
administrators that are using VMware's vSphere management console (vCenter) with the ability to see how virtual
machines are mapped to datastores and individual MSA 2040 volumes. By providing these clear relationships
between VM's, datastores and storage, the VMware administrator's productivity increases, as does the ability to
ensure quality of service. Roles for administrators can be defined on an individual basis, providing the ability to
apply specific permissions for both view and control functions.
HP OneView for VMware vCenter supports mixed array environments including MSA 2040, 1040, P2000, EVA,
P4000, and the XP array series including the P9500.
When deployed with the MSA 2040 array, HP OneView provides the following:





Active Management functionality for the MSA 2040 array:
o Create/Expand/Delete a Datastore
o Create a Virtual Machine from a template
o VMClone for linear storage
Monitors the health and status of the MSA 2040
Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the location and
attributes of the MSA 2040 within the SAN
Identifies what storage features are available to allow administrators to match the features available on
the MSA 2040 to their requirements
Provide a cluster-level view of the storage
HP OneView for VMware vCenter is downloadable from Software Depot:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVPR
For more information on HP OneView for VMware vCenter visit: www.hp.com/go/vmware
HP StoreFront HP StoreFront Manager for Microsoft enables management and monitoring of HP MSA Storage running in
Manager for Microsoft Hyper-V environment with a single pane-of-glass view to events/alerts, capacity and health dashboards
Microsoft
and detailed virtual infrastructure information. It integrates seamlessly with Microsoft System Center Operations
Manager (SCOM) and provides Microsoft administrators the following:
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 21
QuickSpecs
HP MSA 2040 Storage
Optional Software
It supports heterogeneous HP Storage environment including MSA 2040, 1040, HP StoreVirtual, HP 3PAR
StoreServ, HP StoreOnce, HP StoreEasy, HP XP, HP EVA and HP StoreEver Storage.
When deployed with the MSA 2040 array, HP StoreFront Manager provides the following:
 Monitors the health, events and alerts for the MSA 2040/1040 – Linear and virtual Pools, and volumes
 Provides detailed information on the VMs provisioned through MSA Storage
 Effortless installation and configuration using Powershell
HP StoreFront Manager for Microsoft for MSA Storage is downloadable from Software Depot:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=System_Center
vStorage API
for Array
Integration
(VAAI)
The vStorage API for Array Integration (VAAI) is one of the storage application programming interface (API) sets in
vSphere. VAAI is an API storage partners can leverage to enhance performance of virtual machine (VM)
management operations by delegating these operations to the storage array. With hardware offload, ESX/ESXi
hosts perform certain operations faster and consume less server CPU and memory resources, and also storage
port and storage fabric bandwidth. VAAI includes high performance and scalable VM data path primitives.
Storage Hardware Primitives for VAAI




Full Copy or Hardware Assisted Move
Block Zeroing or Hardware Assisted Zeroing
Hardware Assisted Locking or Atomic Test and Set (ATS)
UNMAP reclaims space that is no longer on a thinly provisioned VMFS volume
Snapshot and Product Features
Volume Copy Data Protection
Software for
the MSA 2040
 Snapshots create up to 512 point-in-time pictures of data
 Volume Copies create up to 128 point-in-time copies of data
 Recovery is instant - revert data from any previous Snapshot or Volume Copy (only available on linear
storage).
 Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
 A 64 snapshot license and Volume Copy are included with all MSA 2040 models.
 Support and updates are desired for bundled software functionalities (such as 64 LTU Snap and/or
Volume Copy etc. in the MSA 2040 products) a combination HW + SW support care pack must be
purchased.
 HP does not provide warranty assistance for software products included with our base hardware
products. This would either be SupportPlus or SupportPlus24. The hardware warranty component of
these services is accounted for in the pricing of the SP and SP24 care packs.
Data Testing


Snap or clone data to test the performance of a software application on 'offline' production data
Snap or clone data to test how a software patch or enhancement will function on 'offline; production data
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 22
QuickSpecs
HP MSA 2040 Storage
Optional Software
MSA 2040 Snapshot and Clone:
All MSA 2040 models come STANDARD with 64 snapshots and Volume Copy software (only available on linear
storage).
512 Snapshot option is also available for additional cost.
HP MSA 512-Snapshot Software LTU
HP MSA 512-Snapshot Software E-LTU
HP MSA
Remote Snap
Software





TC462A
TC462AAE
HP MSA Remote Snap Software is only available with Linear Storage
HP MSA Remote Snap Software is array based software that provides remote replication on the HP MSA
2040 Array products. HP Remote Snap is a form of asynchronous replication which consists of replication
of block-level data from a volume on a local system to a volume that may be on the same system or on a
second independent system. This second system may be co-located with the first system or may be
located at a remote site.
HP Remote Snap functionality is based on existing Snapshot technology offered by HP MSA SAN Array
products. Snapshots are used to track the data to be replicated as well as to determine the differences in
data updated on the master volume, minimizing the amount of data to be transferred.
HP Remote Snap replication technology provides the ability to accomplish key data management and
protection capabilities. First, because Remote Snap uses snapshots as the underlying technology it
creates multiple local recovery points which can be used for such tasks as to complement daily backups;
second, replication provides the ability to access data in a remote site which could be used for dispersed
operations; and third but definitely not least important replication allows for business continuance in the
event of a failure on the primary site.
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a point-intime image of the data. This point-in-time image is then replicated to the destination volume by copying
the data represented by the snapshot via a transport medium such as TCP/IP (iSCSI) or Fibre Channel. The
amount of data transferred is minimized though the use of snapshots whenever possible.
HP MSA Remote Snap Software LTU
HP MSA Remote Snap Software E-LTU
TC463A
TC463AAE
(NOTE: One license per array is required for replication. For example, if you have two MSA arrays
performing replication (from Primary system to Remote System), you will need 2 licenses).
Product
Features





Storage based asynchronous snapshot replication
Initial copy of data can be performed locally, reducing burden on wide area networks
Support of both Ethernet and Fiber Channel interconnects provides flexible options to the application
environments. Remote Snap is not supported on SAS models.
Snapshot based replication technology means only changed data will be replicated to alternate site
Many to 1 replication (up to 4 nodes) - primary use case is to replicate from "many" branch offices to the
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 23
QuickSpecs
HP MSA 2040 Storage
Optional Software










Customer Benefits
home office for the purpose of backing up data from the branches
Single controller to single controller replication
Advanced scheduler provides several options to IT administrators for business continuance
Flexible architecture allows remote replication between MSA 2040 and/or P2000 G3 supported arrays.
Protects existing investments and enhances business continuity planning objectives.
Replication Wizard simplifies the task of setting up and establishing replication pairs from one unified,
easy to use GUI.
Snapshot based replication enables both local and remote recovery depending on the need. Snapshot
replication isolates problems to a specific point in time which can be selected by the administrator.
Additionally snapshot replication supports longer distance replication.
Multiple relationships provide greater storage flexibility and utilization.
Bundled 64 Snapshots and Volume Copy integration provides better efficiencies by combining the
management and array technologies to create local copies.
Fast application recovery with minimal or no transaction loss
Creation of disaster tolerant copies of your critical business data
No-single-point-of-failure solution to increase the availability of your customers data
Disaster Recovery
Replication technology has typically been used to address disaster recovery issues. Disaster recovery
is still the driving business case behind replication. Remote replication can be implemented from the
production site to one or more remote sites across a campus, across town, across a state or across
the country. When a disaster strikes the primary location, the applications can be brought up at the
remote site and continue processing against the replicated copies. When the primary site is back
online, the replication can be reversed and when the data is resynchronized, processing can be
switched back to the primary site and business can continue. In the past, if an e-mail system
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 24
QuickSpecs
HP MSA 2040 Storage
Optional Software
experienced a disaster it was an "oh well" moment. The loss of a day or more of e-mail was not
considered important. Today, e-mail is a critical component of many companies' business plans and
recovering e-mail after a disaster quickly and completely is required.
Maintenance
HP Remote Snap software can also be used to solve other business needs. For instance, E-mail
servers may need periodic maintenance that can take hours to complete. With remote replication in
place, the downtime can be minimal (as long as it takes to bring the remote peer of the primary email server online). The primary server can be worked on (patches, hardware upgrades, etc.) and then
brought back online and into production. A whole datacenter can be failed over to a remote site on
purpose to perform maintenance on generators, air conditioning, etc. Replication can also be used to
perform a datacenter move with minimal downtime (fail everything to the DR site, move the
production datacenter to its new location then fail the DR site back to the new datacenter).
Storage Based
Data replication is performed at the storage subsystem controller level and is totally transparent to
the host, alleviating unnecessary host cycles to perform the data mirroring functions. Unlike a fabric
based or host based solution, the storage based solution dedicates its resources to managing the
replication process between arrays, with minimal impact to applications, other data or devices on the
SAN.
Bi-Directional
The bidirectional HP MSA 2040 Array solution addresses the growing need among businesses to
ensure continuous availability of applications that are critical to daily business operations. HP MSA
2040 enables two sites in a remote replication connection to use each other as a destination to
maintain replicated copies of online data. This maximizes resource utilization while enabling business
continuance, even in the event of disaster.
Disaster Tolerance
The MSA 2040 Arrays utilize snapshot data online and in real time to a remote MSA 2040 through a
local or extended storage area network (SAN). Additionally, data replication can be bidirectional,
meaning that a storage array can be both a source and a destination. A particular LUN can be
replicated in only one direction between the two storage arrays. Write I/O data sent to the source is
replicated by HP MSA 2040 Array to the destination. A pair of properly configured HP MSA 2040 arrays
is a replication solution that guarantees data integrity in the event of a storage system or site failure.
First initial copy
When a DR site is initially created an initial copy of the data from the source volume to the target
volume must occur. The MSA 2040 array allows this first copy to take place locally. After completion
the disks can me manually moved to the remote location. Subsequent changes will only remotely
copy the changed blocks.
SAN Extensions
HP MSA 2040 Array provides the capability to replicate data over direct Fibre Channel. The distances
supported over dark fiber are determined by the speed of the dark fiber connection and the
technology used to communicate over the dark fiber.
Path failover (MPIO)
Multipath failover (MPIO) is supported on all operating systems
HP StoreEasy 3000
Gateway Storage
Add more value to your MSA 2040 array
HP MSA combined with HP StoreEasy 3840 Gateway Storage enables you to consolidate block and file
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 25
QuickSpecs
HP MSA 2040 Storage
Optional Software
storage onto a single, high-performance system - giving your business the flexibility to meet
changing business needs on-demand.
The HP StoreEasy 3840 delivers efficient, secure, and highly available file services that help address
your changing file-serving needs. It reduces your cost of ownership by simplifying management,
increasing resource utilization, centralizing growth, and protecting data. HP StoreEasy 3840 provides
a simple and consistent experience for managing block and file storage for multiple workloads
centrally.
NOTE: For more information visit: www.hp.com/go/StoreEasy
HP StoreEasy 3840 Gateway Storage
E7X03A
HP StoreEasy 3840 Gateway Storage Blade
E7X08A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 26
QuickSpecs
HP MSA 2040 Storage
Service and Support, HP Care Pack, and Warranty Information
Warranty
Three-year limited warranty, parts exchange Next Business day delivery
Enclosures, Hard drives, and Options for the MSA 2040 carry their own warranty. Refer to HP's Limited
Warranty Statement for more information.
The MSA 2040 has been designed with customer self-repairable parts to minimize repair time and
provide greater flexibility in performing defective parts replacement. Please refer to HP's limited
warranty Statement and parts replacement instructions for further details.
http://h18006.www1.hp.com/products/storageworks/warranty.html
Products included in various kits carry their own individual warranties.
NOTE: The warranty of the hard drive options purchased with the MSA 2040 models is different for SAS
hard drives versus SAS MDL. SAS hard drive options have a three year warranty and SAS MDL have a
one year warranty.
Solid State Drives (SSD)
Warranty
3/0/0 warranty; Customer Self Repair (CSR) subject to maximum usage and or maximum supported
lifetime limitations, whichever occurs first. Maximum Supported Lifetime is the period in years set to
equal the warranty for the device. Maximum usage limit is the maximum amount of data that can be
written to the device before reaching the device's write endurance limit.
Service and Support
Services to accelerate time to results
HP Storage Services bring you a rich portfolio of consulting and support services designed to add value
to our core storage products and solutions. We have the know-how and experience to put storage
technology to work for you. We work closely with you as your strategic partner, leveraging our full
services portfolio to make sure that everything works to optimize your enterprise.
Choose from services aligned to our storage product offerings and lifecycle. From mission-critical
onsite services to innovative web-based remote support, you choose the precise level of attention and
support your business demands.
Discover, plan, and
design
Choose from a rich portfolio of services to make the most of MSA 2040 SAN Storage so you can
efficiently and affordably consolidate, manage, and extract value from unstructured data.
HP Services can help you discover needs and create a plan for simplifying the environment,
reducing risk, and maximizing your storage investments
HP Storage Efficiency Analysis - The HP Storage Efficiency Analysis provides customers with a view of
their storage infrastructure and operating environment; highlighting recommendations for
improvements. The report provides extensive insight about the existing storage environment,
opportunities for efficiency gains, asset aging and replacement through interaction with key decision
makers
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-6727ENW.pdf
HP Storage Impact Analysis (SIA): The HP Storage Impact Analysis service provides a 2-4 week
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 27
QuickSpecs
HP MSA 2040 Storage
Service and Support, HP Care Pack, and Warranty Information
discovery engagement with executive summary presentation. The goal of this service is to help
provide customers guidance on storage related issues and develop remediation plans.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-1174ENW.pdf
HP Storage Cloud Design Service - Build a scalable, low-cost enterprise storage environment with
inherent cloud benefits to meet big data needs.
HP Storage Modernization Service: The HP Storage Modernization service is a 4-6 week service that
defines the customers envisioned target storage environment based on a proven solution design
methodology. HP architects will quickly perform tool-assisted automatic discovery and facilitate a
two-day strategy workshop with all key stakeholders involved in the storage infrastructure initiative
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-4620ENW.pdf
Deploy and integrate
We can help you configure, set up, and efficiently use MSA 2040 SAN Storage as well as help migrate
data, improve capacity utilization, and establish information management standards used across
backup, replication, and archiving needs.
HP MSA Family Disk Array Installation and Startup Service - Implement right from the start, as HP
experts install, test, and configure your hardware and software onsite. We deliver a tailored storage
deployment properly integrated into your environment.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-3048ENW.pdf
HP Storage Data Migration Services - End-to-end data migration service providing seamless
discovery, assessment, planning, and design, completely customizable to your organization's storage
area network or network attached storage environment and using innovative software to help you
migrate to HP storage quickly and efficiently.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-0774ENW.pdf
HP Storage and Data Residency Service - Strategic augmentation of your current environment with
HP resources who become your trusted advisor to provide answers that are right for your storage and
backup environment. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-9481ENW.pdf
HP Proactive Select - A flexible way to purchase services to fit your environment with an extensive
menu of HP Proactive Select event and technical services, such as onsite firmware upgrades, health
checks, assessments, and education.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
Operate and support
Choose the right support to maximize uptime, free up your resources, and achieve improved valueas you get the most out of the existing IT assets while accelerating time-to-revenue.
HP Proactive Care 24x7 - Hardware and software support services designed specifically for your
technology with rapid access to Advanced Solution Center Specialists plus firmware and software
management and best practice advice
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HP Proactive Care Advanced – Building on HP Proactive Care to give you personalized technical and
operational advice from an assigned local Account Support Manager for personalized technical
collaboration, flexible access to specialist skills to help fine-tune business critical IT, and Enhanced
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 28
QuickSpecs
HP MSA 2040 Storage
Service and Support, HP Care Pack, and Warranty Information
Critical Incident Management to help make sure your business is not affected if you experience a
system or device outage.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-8855ENW&cc=us&lc=en
HP Proactive Care Personalized Support - An option-if you have HP Proactive Care- to bring increased
personalization of the Proactive Care support experience through the assignment of an Account
Service Manager (ASM) who provides IT best practice advice to help address IT issues and projects.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-3446ENW.pdf
HP Foundation Care 24x7 Service - HP Foundation Care 24x7 connects you to HP 24 hours a day,
seven days a week for assistance on resolving issues - hardware onsite response within four hours and
software call back within two hours after opening your case. Three years' coverage recommended with
HP Care Pack Service.
HP Education Services - Comprehensive training for new, as well as experienced, storage
administrators designed to expand your skills and keep you up to speed with the latest storage and
virtualization technology from HP Storage. http://education.hp.com/curr-storsan.htm
Optimized Care- delivers Choose from three levels of operate and support care
best performance and
HP 6hr CTR Proactive Care Service
stability through
deployment and proactive
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new
management practices
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select
credits per year, per array
Standard Care-maintains
high level of uptime, along
with expert help to cut the
cost and complexity of
implementation and
support
HP Proactive Care 24x7
Basic Care-Minimum
recommended support
HP Foundation Care 24x7
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select
credits per year, per array
Additional options - 10 Proactive Select Credits per Year
Remote
Support Automation
HP Automation provides 24x7 coverage, proactive problem prevention, accurate problem diagnosis
and faster problem resolution, as well as interactive support portals and tools. This is an integral, and
cost-free, part of your HP support relationship and we are continually investing in additional cuttingedge capabilities to make it better.
For more information
www.hp.com/services/storage
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:

Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 29
QuickSpecs
HP MSA 2040 Storage
Service and Support, HP Care Pack, and Warranty Information

Customers purchasing from a commercial reseller can find HP Care Pack Services at
www.hp.com/go/lookuptool
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 30
QuickSpecs
HP MSA 2040 Storage
Configuration Information
Configure to Order Program Information
HP has a very successful Configure to Order program for the MSA 2040 family The MSA 2040 models and options may or may not
be factory installed in a rack with add-on controllers, switches, MSA 2040 disk enclosures and hard drives. The MSA 2040 arrays
may be integrated with ProLiant servers or as standalone storage.
Orders to be shipped through the CTO process must have a minimum of two drives of the same type (SSD, SAS or SAS MDL)
ordered per controller.
Step 1 - MSA 2040 - Base Configuration
Select one chassis:
Model Name
SKUs
MSA 2040 Controller-less Chassis (AC-powered)
HP MSA 2040 SFF Chassis16
C8R10A
HP MSA 2040 LFF Chassis
C8R12A
17
MSA 2040 Controller-less Chassis (DC-powered)
HP MSA 2040 SFF DC-power Chassis17
C8R11A
HP MSA 2040 LFF DC-power Chassis
C8R13A
18
Step 2 - Options
Select each option with quantities specified.
Step 2a - MSA 2040 Controllers
SKUs
Quantity
Description with Parts Shipped:
1 or 2
HP MSA 2040 SAN Controller
NOTE: for either the LFF or SFF MSA 2040 chassis or the two DC-powered chassis
C8R09A
1 or 2
HP MSA 2040 SAS Controller
NOTE: each controller has four mini-SAS HD ports for host connection. Cables must be
purchased separately
NOTE: for either the LFF or SFF MSA 2040 chassis or the two DC-powered chassis
C8S53A
Step 2b - SFPs
NOTE: MSA 2040 SAN Controller does not ship with any SFPs. MSA SAS controllers do not require SFP modules.
Customer must select one of the following SFP options. Each MSA 2040 SAN controller can be configured with 2
or 4 SFPs. MSA SFPs are for use only with MSA 2040 SAN Controllers. For MSA 2040 10Gb iSCSI configuration
user can use DAC cables instead of SFPs.
MSA Small Form Factor Pluggable (SFPs) Transceivers:
HP MSA 2040 8Gb Short Wave Fibre Channel SFP+ 4-Pack Transceiver
(Includes four x 8Gb SW FC SFPs)
16
Will accept one or two MSA 2040 SAN or SAS controllers and can accommodate up to twenty four 2.5-in (SFF) drives
17
Will accept one or two MSA 2040 SAN or SAS controllers and can accommodate up to twelve 3.5-in (LFF) drives
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
C8R23A
Page 31
QuickSpecs
HP MSA 2040 Storage
Configuration Information
HP MSA 2040 16Gb Short Wave Fibre Channel SFP+ 4-Pack Transceiver
(Includes four x 16Gb SW FC SFPs)
C8R24A
HP MSA 2040 10Gb Short Range iSCSI Channel SFP+ 4-Pack Transceiver
(Includes four x 10Gb SW iSCSI SFPs)
C8R25A
HP MSA 2040 1Gb RJ-45 iSCSI Channel SFP+ 4-Pack Transceiver
(Includes four x 1Gb RJ-45iSCSI SFPs)
C8S75A
Step 2c - SSD, SAS, SED or SAS MDL Drive Options
NOTE: SAS MDL drives are designed for archival or reference data. They should not be used in a heavy or intense
I/O environment. Those situations require the use of enterprise-class SSD or SAS drives. MSA 3.5-inch or 2.5inch drives are for use only with MSA arrays.
Customers can mix SSD, SAS, and SAS MDL drives in the same array head and disk enclosure.
MSA 2040 Drives:
Solid State Drives (SSDs) (SFF 2.5-inch)
12G SFF SAS SSDs
HP MSA 200GB 12G ME SAS SFF (2.5in) Enterprise Mainstream 3yr Warranty Solid State Drive
K2Q45A
HP MSA 400GB 12G ME SAS SFF (2.5in) Enterprise Mainstream 3yr Warranty Solid State Drive
J9F37A
HP MSA 800GB 12G ME SAS SFF (2.5in) Enterprise Mainstream 3yr Warranty Solid State Drive
J9F38A
HP MSA 1.6TB 12G ME SAS SFF (2.5in) Enterprise Mainstream 3yr Warranty Solid State Drive
J9F39A
6G SFF SAS SSDs
HP MSA 200GB 6G ME SAS 2.5in Enterprise Mainstream 3yr Warranty Solid State Drive
C8R19A
HP MSA 400GB 6G ME SAS 2.5in Enterprise Mainstream 3yr Warranty Solid State Drive
C8R20A
HP MSA 800GB 6G ME SAS 2.5in Enterprise Mainstream 3yr Warranty Solid State Drive
C8R21A
SAS Drives (SFF 2.5-inch)
12G SFF 15K SAS HDDs
HP MSA 300GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F40A
HP MSA 450GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F41A
HP MSA 600GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard Drive
J9F42A
6G SFF 15K SAS HDDs
HP MSA 146GB 6G SAS 15K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
E2D54A
HP MSA 300GB 6G SAS 15K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
C8S61A
12G SFF 10K SAS HDDs
HP MSA 300GB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F44A
HP MSA 600GB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F46A
HP MSA 900GB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F47A
HP MSA 1.2TB 12G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Drive
J9F48A
HP MSA 1.8TB 12G SAS 10K SFF (2.5in) 512e Enterprise 3yr Warranty Hard Drive
J9F49A
NOTE: 512e drives require MSA 1040/2040 firmware version GL200P002 or newer
6G SFF 10K SAS HDDs
HP MSA 300GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
E2D55A
HP MSA 450GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
E2D56A
HP MSA 600GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
C8S58A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 32
QuickSpecs
HP MSA 2040 Storage
Configuration Information
HP MSA 900GB 6G SAS 10K 2.5-inch Dual Port Enterprise 3yr Warranty Hard Drive
C8S59A
HP MSA 1.2TB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E7W47A
12G SFF 7.2K SAS MDL HDDs
HP MSA 1TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
J9F50A
HP MSA 2TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard Drive
J9F51A
NOTE: 512e drives require MSA 1040/2040 firmware version GL200P002 or newer
6G SFF 7.2K SAS MDL HDDs
HP MSA 1TB 6G SAS 7.2K 2.5-inch Dual Port Midline 1yr Warranty Hard Drive
C8S62A
MSA Large Form Factor (LFF) SAS MDL DP drives for MSA 2040 Array and MSA 2040 3.5-inch Disk Enclosure
12G LFF 7.2K SAS Midline Drives
HP MSA 8TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
M0S90A
HP MSA 6TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
J9F43A
HP MSA 4TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
K2Q2A
NOTE: 512e drives require MSA 1040/2040 firmware version GL200P002 or newer
6G LFF 7.2K SAS Midline Drives
HP P2000 1TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
AP861A
HP P2000 2TB 6G SAS 7.2K LFF (3.5-inch) Dual Port MDL Hard Drive
AW555A
HP MSA 2TB 6G SAS 7.2K LFF(3.5in) Midline Self Encrypted 1yr Wty Hard Drive
C8R22A
HP P2000 3TB 6G SAS 7.2K rpm (3.5-inch) Midline 1yr Warranty Hard Drive
QK703A
HP MSA 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
C8R26A
HP MSA 4TB 6G SAS 7.2K LFF(3.5in) Midline Self Encrypted 1yr Wty Hard Drive
G0M44A
HP MSA 6TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
J9F36A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 33
QuickSpecs
HP MSA 2040 Storage
Configuration Information
MSA Large Form Factor (LFF) SAS DP drives for MSA 2040 Array and MSA 2040 3.5-inch Disk Enclosure
12G LFF 15K SAS HDDs (SFF Drives in LFF Converters)
HP MSA 300GB 12G SAS 15K LFF (3.5in) Converter Enterprise 3yr Warranty Hard Drive
J9V68A
HP MSA 450GB 12G SAS 15K LFF (3.5in) Converter Enterprise 3yr Warranty Hard Drive
J9V69A
HP MSA 600GB 12G SAS 15K LFF (3.5in) Converter Enterprise 3yr Warranty Hard Drive
J9V70A
6G LFF 15K SAS HDDs
HP P2000 300GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
AP858A
HP P2000 450GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
AP859A
HP P2000 600GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive
AP860A
MSA Small Form Factor (SFF) SAS DP Self-Encrypted Drives for MSA 2040 Array and D2700 2.5-inch Disk
Enclosure
HP MSA 900GB 6G SAS 10K SFF(2.5in) Enterprise Self Encrypted 3yr Wty Hard Drive
G0M43A
NOTE:




All drives within the MSA 240 array must be self-encrypted drives to enable the encryption feature.
There cannot be a mixture of encrypted and non-encrypted drives within the same array.
SEDs can be used in a non-SED environment, but will not be encrypted unless all drives in the array are
SED
Self-encrypted drives are only supported on the MSA 2040 Storage array and requires Firmware
version GL105. Customers must upgrade their MSA 2040 controller firmware to GL105 or later for SelfEncrypting Drive functionality
All MSA SEDs are FIPS 140-2 compliant FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been
certified by the U.S. National Institute of Standards and Technology (NIST) and Canadian
Communications Security Establishment (CSE) as meeting the Level 2 security requirements for
cryptographic modules as defined in the Federal Information Processing Standards (FIPS) 140-2
Publication
NOTE:


For instructions to setup and use SEDs, refer to the MSA 2040 CLI Reference Guide and MSA 2040 SMU
Reference Guide located on the HP MSA 2040 Manuals page:
(http://www.hp.com/support/msa2040/Manuals for instructions on setup and use of SEDs
Also, Refer to the HP MSA 1040/2040 Best Practices document at
http://www.hp.com/support/msa2040/BestPractices
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 34
QuickSpecs
HP MSA 2040 Storage
Configuration Information
Step 2d - Drive Enclosure Options
MSA 2040 Dual I/O 3.5-inch 12 Disk Enclosure
Rear Panel components
1. Power Indicator
4. SAS In Port
2. Fault Indicator
5. SAS Out Port
3. Unit Locator
HP D2700 Disk Enclosure
Rear Panel components
1. Power Supply 1
6. Fan 2
2. Power Supply 2
7. Rear UID push button
3. Fan 1
8. Enclosure LEDs
4. I/O Module A
9. Power on/standby button
5. I/O Module B
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ships with two .5m mini-SAS
to mini-SAS cables.
HP MSA 2040 LFF Disk Enclosure
C8R18A
HP D2700 Disk Enclosure
AJ941A
Step 2e - SAS Cable Options
mini-SAS to mini-SAS Cables:
Connecting MSA 2040 Controller to a JBOD if a longer cable is desired.
HP External Mini SAS 1m Cable ALL
407337-B21
HP External Mini SAS 2m Cable
407339-B21
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 35
QuickSpecs
HP MSA 2040 Storage
Configuration Information
Step 3 - Other MSA 2040 Options
Choose optional AC Power Cords (2 required)
NOTE: Two PDU cables: one 142263-008 (Black) and one 1422633-013 (Grey), ship standard with all AC-powered enclosures.
HP ProLiant 12 ft Power Cord
227099-001
Power Cord, (Australia/China/New Zealand)
227098-001
Power Cord, (Central Europe)
157215-001
Power Cord, (United Kingdom/Hong Kong)
157216-001
Power Cord, (Switzerland)
157219-001
Power Cord, (Italy)
157217-001
Power Cord, (Denmark)
157218-001
Power Cord, (Japan)
139867-001
Power Cord, (South East Asia/India)
157220-001
Step 4a - Choose Supported Options For Fibre Channel Infrastructure
Model
CFibre Channel
Host Bus Adapters X86 servers
SKUs
NOTE: Please visit www.hp.com/go/fchba for product details and
www.hp.com/storage/spock for compatibility details.
FC HBAs
HP StoreFabric SN1000Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
QW971A
HP StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
QW972A
HP StoreFabric SN1100E 16Gb Single Port Fibre Channel Host Bus Adapter
C8R38A
HP StoreFabric SN1100E 16Gb Dual Port Fibre Channel Host Bus Adapter
C8R39A
BladeSystem c-Class Fibre Channel Mezzanine HBAs
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
451871-B21
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
456972-B21
C-class HBA
HP QMH2572 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
651281-B21
HP LPe1205A 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
659818-B21
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Fibre Channel
Host Bus Adapters Integrity servers
AJ764A
Integrity
HP 4Gb 1-port PCI-X 2.0 Fibre Channel Host Bus Adapter
AB378B
HP 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
AD300A
HP 4Gb 1-port PCIe Fibre Channel Host Bus Adapter
AD299A
HP 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
AD355A
HP PCIe 1-port 4Gb and 1-port 1000BT Adapter
AD221A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 36
QuickSpecs
HP MSA 2040 Storage
Configuration Information
HP PCIe 2-port 4Gb and 2-port 1000BT Adapter
AD222A
HP PCIe 2-port 4Gb and 2-port 1000BSX Adapter
AD393A
HP PCI-X 1-port 4Gb FC and 1-port 1000BT Adapter
AD193A
HP PCI-X 2-port 4Gb FC and 2-port 1000BT Adapter
AD194A
HP PCI Express 1-port 8Gb Fibre Channel SR (QLogic) Adapter
AH400A
HP PCI Express 2-port 8Gb Fibre Channel SR (QLogic) Adapter
AH401A
HP 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AH402A
HP 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AH403A
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AP769B
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AP770B
Emulex Fibre Channel HBAs
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AJ762B
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ763B
QLogic Fibre Channel HBAs
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AK344A
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ764A
Integrity server blades
Fibre Channel
Switches
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
451871-B21
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
456972-B21
HP 8/20q Fibre Channel 8-ports Active Switch
AQ233B
HP 8/20q Fibre Channel Switch
AK242B
HP 8/8 Base (0) e-port SAN Switch
AM866B
HP 8/8 (8) Full Fabric Ports Enabled SAN Switch
AM867B
HP 8/24 Base (16) Full Fabric Ports Enabled SAN Switch
AM868B
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Power Pack+ Switch
AP864B
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Full Switch
AP863B
HP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
AP862B
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820B
Brocade 8/24c SAN Switch for BladeSystem c-Class
AJ821B
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822B
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
AW575B
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
AW576B
HP SN6000 Stackable 12-port Single Power FC Switch
BK780B
Cisco MDS 9124 8-ports Active Fabric Switch
AG646A
Cisco MDS 9124 16-ports Active Fabric Switch
AG647A
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 37
QuickSpecs
HP MSA 2040 Storage
Configuration Information
HP MDS 9124 24-ports Active Fabric Switch
AG648A
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
AW563A
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
AW564A
Cisco MDS 9222i Multiservice with 0 SFP Transceiver Modular Fabric Switch
AG851B
HP SN6000C 8Gb 16-port Fibre Channel Switch
AW585A
HP SN6000C 8Gb 32-port Fibre Channel Switch
AW586A
HP SN3000B 16Gb 24-port/12-port Active Fibre Channel Switch
QW937A
HP SN3000B 16Gb 24-port/24-port Active Fibre Channel Switch
QW938A
HP SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch
QK753B
HP SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch
QK754B
HP SN6000B 16Gb 48-port/48-port Active Fibre Channel Switch
QR480B
HP SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch
QR481B
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
AW575B
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
AW576B
HP SN6000 Stackable 12-port Single Power FC Switch
BK780B
PremierFlexOM4 type HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
OM3 FC LC-LC cables
QK733A
Step 4b - Choose Supported Options For SAS Infrastructure
Supported options
18
Mini-SAS Cables
HP 1.0m External Mini-SAS High Density to Mini-SAS Cable18
716189-B21
HP 2.0m External Mini SAS High Density to Mini SAS Cable
716191-B21
HP 4.0m External Mini SAS High Density to Mini SAS Cable
716193-B21
HP External 1.0m (3ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
716195-B21
This cable is used to connect 6Gb SAS initiator to MSA 2040 SAS controller. This is not used for connecting to a disk enclosure.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 38
QuickSpecs
HP MSA 2040 Storage
Configuration Information
HP External 2.0m (6ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
716197-B21
HP External 4.0m (13ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
716199-B21
Bus Adapters
HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS Host Bus Adapter
614988-B21
HP H221 PCIe 3.0 SAS Host Bus Adapter
729552-B21
SAS Controllers
HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS Controller
488348-B21
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller
513778-B21
HP Smart Array P721m/2GB FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
650072-B21
HP Smart Array P721m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
655636-B21
HP Smart Array P731m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
698536-B21
HP Smart Array P431/2GB FBWC 12Gb 2-ports Ext SAS Controller
698531-B21
Switches
HP 6Gb SAS Switch Single Pack for HP BladeSystem c-Class
BK763A
HP 6Gb SAS Switch Dual Pack for HP BladeSystem c-Class
BK764A
Step 4c - Choose Supported Options For 10GbE Infrastructure
- verify that the cable/transceiver is supported with the connecting device (i.e. switch or NIC/iSCSI HBA)
For detailed information on NICs and OS initiator please go to: http://www.hp.com/storage/spock
Copper Cable
DAC Cable
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable
487649-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable
487652-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
487655-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
537963-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 7m Direct Attach Copper Cable
487658-B21
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
Step 5 - Choose Rack Options
Please refer to the HP Infrastructure products page for more information on HP racks and rack options or the HP 10000 G2 Series
Rack QuickSpec.
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 39
QuickSpecs
HP MSA 2040 Storage
Configuration Information
Step 6 – Services (Software Support)
MSA 2040
Advanced
Virtualization
Functionality
The MSA advanced virtualization functionalities are available for new and existing MSA 2040 owners via
firmware upgrade. (Thin Provisioning, SSD Read Cache, Automated Tiering: Archive and Performance**,
Redirect on Write Snapshots and Wide Striping).
**NOTE: The Performance Automated Tiering is a paid option for the MSA 2040.
HP MSA 2040 Perf Auto Tiering LTU
HP MSA 2040 Perf Auto Tiering E-LTU
HP MSA 512-Snapshot Software LTU
HP MSA 512-Snapshot Software E-LTU
HP MSA Remote Snap Software LTU
HP MSA Remote Snap Software E-LTU
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
D4T79A
D4T79AAE
TC462A
TC462AAE
TC463A
TC463AAE
Page 40
QuickSpecs
HP MSA 2040 Storage
Technical Specifications
MSA 2040
POWER REQUIREMENTS

Input Power
Requirements
(typical-running I/O)
SFF/LFF arrays
110VAC 3.32A, 344-390 W; 220VAC 1.61A,374-432W
Max Input Power
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
Heat Dissipation
1622 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature
41°F to 104°F (5°C to 40°C)
Shipping Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity
Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
A weighted sound power LWAd=6,75 B
Sound Pressure
A weighted sound pressure LpAm - 55dB
SHOCK AND VIBRATION
Shock, Operational
3G's for 11 milliseconds
Shock, Non-Operational
15G 11ms half sine
Vibration, Operational
5-500Hz, 0.14 Grms shaped
Vibration, NonOperational
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
PHYSICAL
MSA 2040 Controllers:
Height
3.5 in/ 8.9 cm
Depth (excluding cables)
(back of ear to back of
controller handle)
MSA 2040 SFF 24-bay array: 19.5 in / 49.5 cm
MSA 2040 LFF 12-bay array: 22.5in. / 57.2 cm
Width (body only)
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
Chassis Weight
(no controllers)
MSA 2040 LFF chassis: 31 lbs. (DC-pwr model: 32.6 lbs)
MSA 2040 SFF chassis: 29.1 lbs (DC-pwr model: 30.7lbs)
User Interface
Status and activity provided via management interfaces. Status Indicators
on front of Controller
RAID Support
0, 1, 3, 5, 6, 10, 50
Cache Memory
4GB Read/Write. ECC protection with backup to Flash memory (indefinite
backup)
Cache Backup
ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware
yes
Disk Drive and Enclosure 6 Gb SAS - Serial Attached SCSI
Protocol Support
Host Ports
FC: 4 x 8Gb Fibre Channel (per controller)
FC: 4 x 16Gb Fibre Channel (per controller)
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 41
QuickSpecs
HP MSA 2040 Storage
Technical Specifications
iSCSI: 4 x 10GbE iSCSI (per controller)
iSCSI: 4 x 1GbE iSCSI (per controller)
SAS: 4 x 12 Gb mini-SAS HD using SAS 3.0 SFF-8644 connect interface (per
controller)
MSA 2040
Regulatory Info
Expansion Port
SAS (SFF8088) 4x lane 6 Gb SAS
Weight, controller
MSA 2040 SAN Controllers 4.8 lbs.
Safety
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
Electromagnetic
Compatibility
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International
Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS and WEEE
RoHS-6/6 Compliance, China RoHS, WEEE
Country Approvals
United States ,Australia/New Zealand, Canada, China (PRC), European
Union, Germany (GS Mark), Japan, South Korea, Taiwan
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 42
QuickSpecs
HP MSA 2040 Storage
Summary of Changes
Date
03-Apr-2015
Version History
From Version 11 to 12
Action
Changed
30-Mar-2015
From Version 10 to 11
12-Dec-2014
From version 9 to 10
Changed
Added
Changed
01-Dec-2014
29-Sep-2014
02-May-2014
25-Apr-2014
31-Mar-2014
09-Dec-2013
From Version 8 to 9
From Version 7 to 8
From Version 6 to 7
From Version 5 to 6
From Version 4 to 5
From Version 3 to 4
Changed
Changed
Changed
Changed
Changed
Changed
Description of Change:
Changes made to the What´s New, Models, Family Info,
Optional SW and Config Info. Sections.
SKUs descriptions were updated, Obsolete SKU were removed.
Support for 12G SFF and LFF w Hard Disk Drives
Added the Configuration Table for mixing SFPs. on the
Features Section
Changes made throughout the QuickSpecs.
Changes made throughout the QuickSpecs.
Operate and Support and Basic Care were revised.
Models and mini-SAS cables were revised.
Hard Drives were revised.
Changes made to the What's New section:
Introducing a new 1.2 TB SFF 10K Enterprise Hard Drive
(E7W47A)
Adding two new MSA 2040 bundles using the new 1.2 TB SFF
SAS Hard Drive
C8R16A - HP MSA 2040 SAN Dual Controller 24x1.2TB SAS 10K
SFF HDD 28.8TB Bundle
30-Sep-2013
From Version 2 to 3
Changed
C8S56A - HP MSA 2040 SAS Dual Controller 24x1.2TB SAS 10K
SFF HDD 28.8TB Bundle
Changes made throughout the entire QuickSpec.
Changed What's New in the MSA 2000 array family to:
Adding 12Gb SAS Models -support up to Four 6Gb/12Gb SAS
connections per controller.
Adding support for 1GbE/10GbE iSCSI to MSA 2040 SAN
Controller.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 43
QuickSpecs
HP MSA 2040 Storage
Summary of Changes
NOTE: Customers must upgrade their MSA 2040 controller
firmware to GL101 or later for iSCSI functionality.
Adding support for HP MSA 2040 SAN Controller to offer a
combination of host interface protocols by mixing FC and iSCSI
SFPs on the same controller. Please refer to the valid
Configuration Table for Mixing SFPs in this doc.
21-Aug-2013
From Version 1 to 2
Changed
Adding support for new 1.2 TB SFF SAS and 4TB LFF SAS
Midline drive.
Changes made in the Family Information and Configuration
Information sections.
© Copyright 2015 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 44