advertisement
Gigabit PoE
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit
Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.
Helps reducing number of wires that lead up the tower. Power over pins 4 and 5 is used to power and communicate with 10/100/1000
Mbps devices.
For using with any Gigabit RouterBOARD that supports 9-48V PoE.
PoE
Input
Power
Max. Current
Passive POE (non 802.3af)
9 - 48V (Accepts up to 56V)
4,5 Cable Pins - 9-48V; 7,8 Pins - Return
2A
Ethernet Cable Length Up to 60m
Ethernet Speed 10/100/1000 Mbps
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Powers any RouterBOARD over Gigabit Ethernet
- Reduces the number of wires that lead up the tower
- Powers and communicates with 10/100/1000 Mbps devices
- Passive PoE (non 802.3af)
- Wide range of input voltages (9-48V)
- Provides up to 2A of current
- Can be used with Ethernet cables up to 60m in length
- Compatible with any Gigabit RouterBOARD that supports 9-48V PoE
Related manuals
Frequently Answers and Questions
What is the maximum input voltage that the RBGPOE can accept?
What is the maximum current that the RBGPOE can provide?
What is the maximum length of Ethernet cable that can be used with the RBGPOE?
What type of PoE does the RBGPOE use?
What is the purpose of the RBGPOE?
advertisement