Hewlett Packard Enterprise JG963A network switch

Data sheet
HP 1950 Switch Series
Key features
•Four 10G uplinks for fast connection to servers and storage
•Two SFP+ and two 10GBASE-T ports—supports fiber and cost-effective
copper connectivity
•Four-high stacking allows for redundancy while simplifying administration
•Customized operation using intuitive Web interface
•Limited Lifetime warranty
Product overview
The HP 1950 Switch Series consists of smart web-managed Gigabit Ethernet
switches with 10-Gigabit uplinks, for advanced small business customers needing
high-performance connections to servers and network storage.
The 1950 Switch Series includes four switches: two standard models and two PoE+
models in 24- and 48-port configurations. The switches each have two 10GBASE-T
ports supporting copper-based Category 5e-based cabling, and two 10G SFP+ ports
for fiber connectivity. The PoE+ models both have a PoE power budget of 370 W to
power up PoE/PoE+ compliant client devices.
The 1950 Switch Series has an intuitive Web-based interface for simple customization
of network operation. It supports true-stacking, allowing up to four devices to be
logically administered as a single entity, simplifying administration while supporting
greater network redundancy. Models support both rack mounting and desktop
operation. They have IPv4 and IPv6 operation, with Layer 2 switching as well as Layer
3 static routing. Other features include: link aggregation to boost link performance;
VLANs, Access Control Lists, and 802.1X network login for enhanced security; and
three versions of Spanning Tree Protocol (STP) for added network resiliency. The
switches come with a limited lifetime warranty covering the unit, fans, and power
supplies, as well as 24X7 phone support for the first three years of ownership.
Data sheet | HP 1950 Switch Series
Features and benefits
Management
•Four-high true stacking
Simplifies administration of multiple devices. Create a single logical managed unit with up to
four 1950 switches. Balance connections across multiple units with standard Link Aggregation
(LACP) for enhanced network resiliency. Stack using affordable Cat 5e, or long distance fiber,
or localized DAC cables. Stacked units can be co-located or separated physically
•Intuitive Web browser-based management
Allows for easy customization of the switch—even by non-technical users
•Secure Web-management sessions with HTTPS/SSL
Encrypts and otherwise protects management sessions through HTTP Secure (HTTPS).
Prevents snooping of sensitive management information such as passwords
•SNMPv1, v2c, and v3
Facilitates remote management of the switch, as the device can be discovered and monitored
from an SNMP management station
•Complete session logging
Provides detailed information for problem identification and resolution
•Dual flash images
Provides independent primary and secondary operating system files for backup while upgrading
•Port mirroring
Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
•Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping
consistent among all clock-dependent devices within the network so that the devices can
provide diverse applications based on the consistent time
•IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network,
facilitating easy mapping by network management applications
•Limited Command Line Interface (CLI)
Facilitates the deployment and initial configuration of the unit. Supports troubleshooting
actions as well
•RMON
Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
•Default DHCP client mode
Simplifies device deployment. Connect a new out-of-the box switch to a network with a DHCP
server and the device will obtain its IP address automatically with plug-and-play operation.
In the absence of a DHCP server, the switch will fall back to a unique static address determined
by the switch’s MAC address
•Cable diagnostic tool
Used to remotely detect cable issues with cables attached to the switch
2
Data sheet | HP 1950 Switch Series
Quality of service (QoS)
•Broadcast control
Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
•Rate limiting
Sets per-port ingress enforced maximums and per-port, per-queue minimums
•Traffic prioritization
Makes it possible to prioritize important and/or time-sensitive traffic ahead of less important
traffic. Use with VoIP or video to optimize its performance on the network. Recognizes both
IEEE 802.1p and DSCP prioritization tagging. Packets are mapped to four hardware queues for
more effective throughput
Connectivity
•Auto-MDI/MDIX
Adjusts automatically to straight-through or crossover cables on all 10/100/1000 and
10GBASE-T ports
•IEEE 802.3X flow control
Provides a configurable flow throttling mechanism propagated through the network to
prevent packet loss at a congested node
•Packet storm protection
Protects against broadcast, multicast, or unicast storms with user-defined thresholds
•Jumbo frame supports up to 10-kilobyte frames
Improves efficiency of data transfers by allowing more data into a given packet. This is
especially useful for transfers of large amounts of data. HP 1950 Switches support up to
10 kilobyte frame sizes
•IEEE 802.3at Power over Ethernet (PoE+)
Delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of
those devices. The 1950 Series has two PoE+ enabled models. The PoE+ 802.3at standard
supports delivery of up to 30 watts of power to the attached devices, enough to support the
latest models of IP phones, Wireless Access Points, video surveillance cameras, or other PoE/PoE+ enabled devices. HP 1950 PoE+ models support 370 W of total PoE power
•IEEE 802.3af Power over Ethernet (PoE) ready
Delivers power to compliant devices over Ethernet cabling, greatly simplifying installation
of those devices. HP 1950 PoE+ models are fully backward compliant with the older PoE
standard which provides up to 15.4 W of PoE power per port to attached devices
•Available redundant power for PoE+ models
Optional Redundant Power System is available to add power redundancy and to supplement
the PoE power of the PoE+ switches. With the optional RPS, the PoE+ power budget can be
increased to 740 W; additionally, the switch will continue operating and powering downstream
PoE devices even if the unit internal power supply should fail. Order the HP RPS1600
Redundant Power System (JG136A)
•Fully IPv6 capable
––IPv6 host
Enables switches to be managed and deployed at the IPv6 network’s edge
––IPv6 routing
Supports IPv6 static routes
––MLD snooping
Forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding
––IPv6 ACL/QoS
Supports ACL and QoS for IPv6 network traffic
3
Data sheet | HP 1950 Switch Series
Security
•Access Control Lists (ACLs)
Gives granular control over what traffic goes where in the network. Allows for traffic filtering.
ACLs rules can be based on MAC-address or IP-address. ACL rules can be time-based to
implement access control during certain hours or days
•IEEE 802.1X and RADIUS network logins
Controls port-based access for authentication and accountability
•Automatic VLAN assignment
Assigns users automatically to the appropriate VLAN based on their identity, location and time
of day
•STP BPDU port protection
Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing
forged BPDU attacks
•STP root guard
Protects the root bridge from malicious attacks or configuration mistakes
•Automatic denial-of-service protection
Protects the network by blocking malicious DoS attacks aimed at the switch itself
•Management password
Provides security so that only authorized access to the Web browser interface is allowed
Performance
•Half-/full-duplex auto-negotiating capability on every port doubles the throughput of
every port
•Selectable queue configurations
Allows for increased performance by selecting the number of queues and associated memory
buffering that best meet the requirements of the network applications
•IGMP/MLD Snooping
Improves network performance by filtering multicast traffic when there is no multicast receiver
on a connection. Without this, multicast traffic is flooded to all ports. IGMP snooping is used in
IPv4 networks. The IPv6 equivalent—MLD Snooping—is also supported
•10-Gigabit SFP+ based Fiber Uplinks
Supports high-bandwidth connections over fiber. HP 1950 Switches each have two SFP+
transceiver slots supporting 10-Gigabit fiber-based connections using optional 10G
transceivers. Fiber is particularly suited for connecting at distances beyond the 100 Meter
limitation of copper-based Cat 5e cabling. Alternatively use the SFP+ ports for redundant
stacking of up to four units using Direct Attached Cables (DAC)
•10-Gigabit 10GBASE-T RJ45 Uplinks
Supports high-bandwidth connections over Cat 5e cabling. HP 1950 Switches each have two
10GBASE-t RJ45 ports supporting 10-Gigabit copper-based connections. Cat 5e is economical
and practical for distances up to 100 Meters. Alternatively use the 10GBASE-T ports for
redundant stacking of up to four units
Layer 2 switching
•VLAN support and tagging
Supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
•STP
Supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for
faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
•BPDU filtering
Improves network efficiency by filtering unnecessary BPDU packets on a port. When STP is
enabled globally but disabled on specific ports, BPDU packets are not sent out the ports where
STP is disabled
4
Data sheet | HP 1950 Switch Series
Layer 3 services
•Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs;
gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP
operation between subnets or when subnets are separated by a Layer 2 network
•DHCP Relay
Simplifies management of DHCP addresses in networks with multiple subnets
Layer 3 routing
•Static IPv4/IPv6 routing
Provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces);
allows manual routing configuration
Resiliency and high availability
•Link aggregation
Groups together multiple ports (up to a maximum of two ports) automatically using Link
Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection
to the network backbone; helps prevent traffic bottlenecks
Convergence
•LLDP-MED (Media Endpoint Discovery)
Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN
to automatically configure network devices such as IP phones
•Auto voice VLAN
Recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
•PoE Models For Converged Voice/Data Networks
Simplifies and lowers the cost of installing a converged infrastructure. Power IP phones,
Access Points, Video Surveillance cameras, or other PoE-enabled devices. HP 1950 Switches
support multiple methods of allocating PoE power—IEEE 802.3af class, LLDP-MED, or user-specified—for more efficient energy usage
Additional information
•Green initiative support
Provides support for RoHS and WEEE regulations
•Green IT and power
Improves energy efficiency through the use of the latest advances in silicon development;
shuts off unused ports and utilizes variable-speed fans, reducing energy costs
Warranty and support
•Limited Lifetime Warranty 2.0
Advance hardware replacement with next-business-day delivery (available in most countries).
See hp.com/networking/warrantysummary for duration details.
•Electronic and telephone support (for Limited Lifetime Warranty 2.0)
Limited 24x7 telephone support is available from HP for the first 3 years; limited electronic
and business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to hp.com/networking/warrantysummary
5
Data sheet | HP 1950 Switch Series
HP 1950 Switch Series
Specifications
HP 1950-24G-2SFP+-2XGT Switch (JG960A)
HP 1950-48G-2SFP+-2XGT Switch (JG961A)
I/O ports and slots
24 RJ-45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
48 RJ-45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and slots
1 RJ-45 console port to access limited CLI port
1 RJ-45 console port to access limited CLI port
17.17(w) x 6.3(d) x 1.73(h) in (43.6 x 16 x 4.4 cm) (1U height)
6.61 lb (3 kg)
17.32(w) x 10.63(d) x 1.73(h) in (44 x 27 x 4.4 cm)
(1U height)
11.02 lb (5 kg)
Memory and processor
128 MB flash; packet buffer size: 1.5 MB, 1 GB SDRAM
128 MB flash; packet buffer size: 3 MB, 1 GB SDRAM
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
Performance
100 Mb Latency
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching capacity
Routing table size
MAC address table size
< 5 µs
< 5 µs
< 1.5 µs
up to 95.2 Mpps (64-byte packets)
128 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
< 5 µs
< 5 µs
< 1.5 µs
up to 130.9 Mpps (64-byte packets)
176 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
Reliability
MTBF (years)
87.2
51
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
Low-speed fan: 19.0 dB, High-speed fan: 44.5 dB;
ISO 7779 Dual speed fan
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
Low-speed fan: 38.4 dB, High-speed fan: 47.0 dB;
ISO 7779 Dual speed fan
Physical characteristics
Dimensions
Weight
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
6
Data sheet | HP 1950 Switch Series
HP 1950 Switch Series
Specifications (continued)
HP 1950-24G-2SFP+-2XGT Switch (JG960A)
HP 1950-48G-2SFP+-2XGT Switch (JG961A)
50/60 Hz
100—240 VAC, rated
(depending on power supply chosen)
34 W
50/60 Hz
100—240 VAC, rated
(depending on power supply chosen)
54 W
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
Management
IMC—intelligent management center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported by
HP IMC and generic SNMP management platforms.
Refer to documentation for MIB support details.
IMC—intelligent management center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported by
HP IMC and generic SNMP management platforms.
Refer to documentation for MIB support details.
Notes
Transceivers under accessories are recommended
versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B,
JG234A, J9150A, J9151A, J9152A, J9153A. GE SFP:
JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Transceivers under accessories are recommended
versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B,
JG234A, J9150A, J9151A, J9152A, J9153A. GE SFP:
JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Services
Refer to the HP website at hp.com/networking/
services for details on the service-level
descriptions and product numbers. For details
about services and response times in your area,
please contact your local HP sales office.
Refer to the HP website at hp.com/networking/
services for details on the service-level
descriptions and product numbers. For details
about services and response times in your area,
please contact your local HP sales office.
Electrical characteristics
Frequency
AC voltage
Maximum power rating
7
Data sheet | HP 1950 Switch Series
HP 1950 Switch Series
Specifications (continued)
HP 1950-24G-2SFP+-2XGT-PoE+(370W) Switch
(JG962A)
HP 1950-48G-2SFP+-2XGT-PoE+(370W) Switch
(JG963A)
I/O ports and slots
24 RJ-45 auto-negotiating 10/100/1000 PoE+
ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
48 RJ-45 auto-negotiating 10/100/1000 PoE+
ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and slots
1 RJ-45 console port to access limited CLI port
1 RJ-45 console port to access limited CLI port
17.32(w) x 14.17(d) x 1.73(h) in (44 x 36 x 4.4 cm)
(1U height)
13.23 lb (6 kg)
17.32(w) x 16.54(d) x 1.73(h) in (44 x 42 x 4.4 cm)
(1U height)
15.43 lb (7 kg)
Memory and processor
128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM
128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
Mounts in an EIA standard 19-inch telco rack or
equipment cabinet (hardware included)
Performance
100 Mb Latency
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching capacity
Routing table size
MAC address table size
< 5 µs
< 5 µs
< 1.5 µs
up to 95.2 Mpps (64-byte packets)
128 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
< 5 µs
< 5 µs
< 1.5 µs
up to 130.9 Mpps (64-byte packets)
176 Gbps
32 entries (IPv4), 32 entries (IPv6)
16384 entries
Reliability
MTBF (years)
44.4
26.8
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
Low-speed fan: 37.3 dB, High-speed fan: 47.1 dB;
ISO 7779 Dual speed fan
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
up to 16,404 ft (5 km)
Low-speed fan: 47.3 dB, High-speed fan: 50.0 dB;
ISO 7779 Dual speed fan
Physical characteristics
Dimensions
Weight
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
8
Data sheet | HP 1950 Switch Series
HP 1950 Switch Series
Specifications (continued)
HP 1950-24G-2SFP+-2XGT-PoE+(370W) Switch
(JG962A)
HP 1950-48G-2SFP+-2XGT-PoE+(370W) Switch
(JG963A)
50/60 Hz
100—240 VAC, rated
(depending on power supply chosen)
425 W
370 W PoE+
50/60 Hz
100—240 VAC, rated
(depending on power supply chosen)
470 W
370 W PoE+
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type
and quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
When supplemented with the use of an HP RPS1600
Redundant Power System, up to 720 W of PoE+ can
be supplied. Unit max. power consumption with RPS
is 750 W.
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal
power supply. It is dependent on the type
and quantity of power supplies and may be
supplemented with the use of an external power
supply (EPS).
When supplemented with the use of an HP RPS1600
Redundant Power System, up to 800 W of PoE+ can
be supplied. Unit max. power consumption with RPS
is 910 W.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
FCC part 15 Class A; VCCI Class A; EN 55022 Class A;
CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
Management
IMC—intelligent management center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported by
HP IMC and generic SNMP management platforms.
Refer to documentation for MIB support details.
IMC—intelligent management center; Limited
command-line interface; Web browser; SNMP
manager; HTTPS; RMON1; FTP; Supported by
HP IMC and generic SNMP management platforms.
Refer to documentation for MIB support details.
Notes
Transceivers under accessories are recommended
versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B,
JG234A, J9150A, J9151A, J9152A, J9153A. GE SFP:
JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Transceivers under accessories are recommended
versions. Here is the list of fully supported
transceivers. 10G SFP+: JD092B, JD093B, JD094B,
JG234A, J9150A, J9151A, J9152A, J9153A. GE SFP:
JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Services
Refer to the HP website at hp.com/networking/
services for details on the service-level
descriptions and product numbers. For details
about services and response times in your area,
please contact your local HP sales office.
Refer to the HP website at hp.com/networking/
services for details on the service-level
descriptions and product numbers. For details
about services and response times in your area,
please contact your local HP sales office.
Electrical characteristics
Frequency
Voltage
Maximum power rating
PoE power
9
Data sheet | HP 1950 Switch Series
Standards and Protocols
(applies to all products in series)
Device management
RFC 2819 RMON
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Spanning Tree
Protocol IEEE 802.1X
IEEE 802.3 Type 10BASE-T IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation
Control Protocol (LACP)
IEEE 802.3af Power over Ethernet IEEE 802.3at PoE+
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control IEEE 802.3z 1000BASE-X
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2233 Interface MIB
RFC 2233 Interfaces MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2667 IP Tunnel MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q
Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
Network management
IEEE 802.1AB Link Layer Discovery
Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
QoS/CoS
IEEE 802.1P (CoS)
Security
IEEE 802.1X Port Based Network
Access Control
10
Data sheet | HP 1950 Switch Series
HP 1950 Switch Series accessories
Transceivers
HP X121 1G SFP LC SX Transceiver (J4858C)
HP X121 1G SFP LC LX Transceiver (J4859C)
HP X121 1G SFP RJ45 T Transceiver (J8177C)
HP X132 10G SFP+ LC SR Transceiver (J91 50A)
HP X132 10G SFP+ LC LR Transceiver (J9151A)
HP X132 10G SFP+ LC LRM Transceiver (J9152A)
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A)
HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)
HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A)
HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A)
HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A)
HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A)
HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A)
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)
Learn more at
hp.com/networking
11
Data sheet | HP 1950 Switch Series
Sign up for updates
hp.com/go/getupdated
Share with colleagues
Rate this document
© Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
4AA5-6730ENW, May 2015, Rev. 1