User Guide YDR3110
YDR3110
※ The functions and design of this product can be changed without prior notice for quality improvement.
ISL-1276-00 Rev.0
INTRO
Thank you for choosing a YALE product.
CONTENTS
Getting Started
We welcome you to this new door solution world of YALE that is the leading brand in the
world digital door lock industry.
Please find comfort and security in yourself through perfectly combined digital and analog
Safety Cautions
4
Product Features
5
Quick Instruction
6
Components Overview
8
Identification
9
How to Use
10
Instructions
technologies presented by YALE .
This user manual enables you to operate the product more convenient and safer.
Password
Be sure to read this completely before using it.
Card key
Lock Door
Open Door from Inside
Settings
14
Manual Lock Mode Alarm
Volume Setting
Forced Lock
Auto / Manual Feature
Safety Feature
17
Alarm Feature
3-minute Lock Feature
Open Door with fake Password
Extra Features
Option
20
Remote Control Module
Remote Control
Emergency Power
22
Emergency Power Supply for
Discharged Batteries
Product Specification
2
23
3
Must Read This!!!
Product Features
Please read this carefully for your own safety.
1⃞ Smart Pad Feature
Do not install the unit in outdoor
environment.
Do not attempt to disassemble
the unit by yourself. That can
cause an electronic shock and
product damage.
Do not use water and any type of
solvent such as gasoline or
benzene as they can cause
damage to electronic circuit,
deterioration and or paint peel-off.
A separate lighting method where each keypad number has been separately designed is
applied so that users may examine intuitively how the selected function is operated and
if they are run normally.
Getting Started
Safety Cautions
2⃞ Easy re-registration of keys
If you lose a key, you can invalidate the lost key by re-registering
all other keys. You can register up to 20 Card keys to add users.
Do not use an inappropriate tool
that can cause damage or
malfunction of the product.
Please keep your Password
safely.
Make sure the door is securely
locked whenever you leave
your house, especially in the
manual lock mode.
3⃞ Verification with the palm
The security code is verified by palm touching to randomize any
fingerprint residues on the keypad so protect from exposing it.
4⃞ Remote control (Option)
You can use the remote control by installing the applicable
remote control module. This option may not be available
depending on your country or local dealer.
Keep foreign materials away from
the fingerprint sensor to maintain
it cleanly and do not use it with
wet fingers.
Caution
4
Make sure to follow the above instructions to avoid any injuries or damages on the properties .
5
Quick Instruction
1⃞ Register Password
➞
➞
Press
button
Enter Password
(4 to 12 digits)
(Registration)
Press
button
(Registration)
Press
button
(Registration)
2⃞ Register Card key
➞
➞
Press
button
(Registration)
Contact all the keys
you wish to register
on one by one
3⃞ Locking the Door from the outside
① The automatic Lock Sensor detects the door
closing and locks the door within 5 seconds,
or
② Touch the keypad with the palm
Instructions
4⃞ Unlocking the Door from the outside
① Press Card wake up button and
Contact the Card key on key reader, or
② Wake up the lock with the palm touch,
enter the security code and retouch the lock
with the palm.
Components Overview
8
Identification
9
How to Use
10
Password
Card key
Lock Door
Open Door from Inside
5⃞ Locking / Unlocking the Door from
the inside
① Press open / close Button
6⃞ Set Auto/ Manual Lock Mode
Be the Auto/Manual Lock
Setting button released in
the back body to set Auto
Auto Set
Manual thumb turn
6
Volume Setting
Auto / Manual Feature
Safety Feature
Be the Auto/Manual Lock
Setting button pressed in the
back body to set Manual
14
Manual Lock Mode Alarm
Forced Lock
open/close Button
② Turn the Manual thumb turn
to lock / unlock
Settings
Manual Set
Alarm Feature
3-minute Lock Feature
Open Door with fake Password
17
Identification
Basic Contents
Front
(Front Body, install on the outside of the door)
The contents of this product may be subject to change without notice for performance or quality improvement.
》 Basic Contents
❶
❷
❺
❸
❶
Keypad (10-Key)
❷
Card Key Reader
❸
Dead Bolt Jam Lamp
❹
Emergency Power Supply Terminal
❺
Low Battery Indicator
❻
Card Wake up Button
❼
Reset Button
❽
Emergency Cover
Instructions
Components Overview
❻
❹
❼
Front (Front Body)
Back (Main Body)
Card keys
Batteries
Screws
Installation Template
Main Bracket
Strike
9V Emergency battery
(Optional)
Back
❶
❽
(Back Body, install on the inside of the door)
❷
❸ ❹ ❺ ❻ ❼
❽
Users Guide
❾
》 Option
❿
•Remote control
•Remote control module
❶
Battery Cover
❷
Remote Control Module Slot (Option)
❸
1.5V AA Alkaline Batteries
❹
Volume Control Switch
❺
Auto / Manual Lock Button
❻
Open / Close button
❼
Manual Thumb Turn
❽
Forced Lock Switch
❾
Dead Bolt
❿
Edge Bolt (Auto Lock Sensor)
Registration Button
Menu Button
Low Battery Indicator
8
9
To Use Password
How to Use
》 To Register Password
Order
1⃞ Press
button
To Use Card key
Passwords should be selected from 4 to 12 digits. [*] and [#] are not allowed.
Play
(Registration)
》 To Register Card key
Description
Open the battery cover in the back body and
press Ⓘ (Registration) button once.
Order
1⃞ Press
button
2⃞
2⃞ Enter the Password
Enter the Password you wish to register. (4 to 12 digits)
3⃞ Press
button
Press the Ⓘ (Registration) button in the back body again to
complete the Password registration.
(Registration)
》 To Open Door with Password
Order
Play
Play
Open the battery cover in the back body and
press Ⓘ (Registration) button once.
(Registration)
If you hear a“pik”sound, the Card keys are registered.
If you hear a“ti-to-ti-to”sound, the Card key had been
already registered.
Contact all the Card keys
you wish to register on the
Card key reader one by one
3⃞ Press
button
Description
Press the Ⓘ (Registration) button in the back body
again to complete the Password registration.
(Registration)
》 To Open Door with Card key
Description
1⃞ Touch with palm
Touch the keypad of the front body gently with your palm.
2⃞ Enter Password
Enter the registered Password in the keypad.
3⃞ Touch with palm
Touch the keypad of the front body gently with
your palm or press [*] button to end.
Note
•Make sure to leave the door open when registering a Password because you may accidentally lock
a door while trying to register or change a Password the first time.
•The previously registered Password will automatically be deleted when the new Password is registered.
•When registering a Password, the registered Password will be displayed on the keypad
(Smart Pad) in sequential order and, then, be disappeared.
10
Instructions
How to Use
Order
1⃞ Press Card wake up
button
2⃞ Enter Card key
Check the door opening
Play
Description
Press the card wake up button
Contact Card key
Make sure to examine if the door opens normally with
the registered Password after the registration is
complete.
Note
•Keep the door open while you register Card key to prevent yourself from
accidentally getting locked out.
•The previously registered Card key will automatically be deleted when
the new Card key is registered.
•When registering the Card keys, Keypad displays the number of registered Card keys.
11
How to Use
Lock Door
Open Door from Inside
》 To Close Door from Outside
Order
Auto Lock status
Play
5 Sec
》 Press Open/Close button
Description
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after closing the door.
》 To Close Door from Inside
Order
Auto Lock status
Play
5 Sec
➞
Press Open/Close button
(Closed)
Touch the keypad in the front body gently with your
palm to lock a door.
Manual Lock status
Instructions
How to Use
(Open)
》 Using Manual thumb turn in Emergency
Description
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after closing the door.
Turn manual thumb turn to
➞
Unlock to open the lock.
Turn the Manual thumb turn to Close side to lock a door.
(Closed)
(Open)
Manual Lock status
Press Open/Close button
Note
•Even after a door was locked by the Auto Lock function,
please check again if the door was completely closed and locked.
12
13
Settings
Manual Lock Mode Alarm
Forced Lock
In the default setting, manual lock mode does not ring off the alarm when it unlocked
by manual thumb turn.
However, the users can change it for their own security need.
》 Outside Forced Lock Setting - Card key
Order
》 Toggling the Manual Lock Mode Alarm Setting
Order
1⃞ Press
Play
button
Description
Press
Play
1⃞ Press Card wake up
Description
Press the card wake up button
button
Button inside of battery cover
Contact the Card key on Card key reader for 5 seconds
until you hear 3 beeps.
2⃞ Contact Card key
2⃞ Press 0, 8 button
Press 0, 8 button on the keypad
3⃞ Press
Press
Button inside of battery cover to
change the setting
button
Instructions
Settings
》 Outside Forced Lock Setting - Password
Order
Volume Setting
Play
Description
1⃞ Touch with palm
Touch the keypad of the front body gently with your
palm.
2⃞ Enter Password
Enter the registered Password on the keypad.
3⃞ Press
Press the [#] button for 5 seconds.
(The beeping sound sets off for 3 times.)
It enables you adjust the volume of various sounds from the product.
button for
5 seconds
》 Volume Setting
Order
To set volume switch
Play
Description
The operation sound loudness is adjusted according to
the Volume Switch Setting.
(2 : Louder / 1: Lower / 0 : Mute )
Note
•Even when the operation sound is set as‘Mute,’the error and alarm sounds will go off.
14
Note
•If you try to open a door with the Manual thumb turn from inside while the Outside Forced Lock is set, the alarm goes off.
•If the Inside Forced Lock is set, any attempt to open a door from outside whether it’d be a Card key or a Password won’t work.
•When setting the Outside/Inside Forced Lock, enter the number on the keypad (Smart Pad) and
the numbers will flicker from left to right and repeat twice.
15
Safety Feature
Forced Lock
Alarm Feature
The alarm sound continues for 30 minutes or until it is disarmed.
》 Break-in / Damage Alarm
Instructions
Settings
》 Inside Forced Lock Setting
Order
Play
Set / Release Inside
Forced Lock Switch
Description
When the door is closed, move the Inside Forced Lock Switch
to LOCK position so that a red sticker can be seen.
Break-in: When someone tries to Break-in by opening
a door when it is locked, the alarm will go off.
Damage: When the front body was damaged
due to forced separation or drilling,
the alarm will go off.
Release Trespass/Damage Alarm
Automatic / Manual Lock Setting
Auto Lock setting locks a door within 5 seconds after the door is closed.
Method ❶ Enter the registered Password.
Method ❷ Enter the registered Card key.
Method ❸ Press the interior Ⓘ button for 5 seconds.
》 To Set Auto/Manual Feature
Order
Play
Description
》 High Temperature Alarm
Auto Lock Setting
Be the back body Auto/Manual Setting button
released to set Auto
•When there’
s fire, it detects the temperature of the inside.
It not only goes off an alarm but also releases the lock
status automatically.
Manual Lock Setting
Be the back body Auto/Manual Setting
button pressed to set Manual
•Even when the Inside Forced Lock mode is set,
the High Temperature Alarm releases the lock status
automatically.
Release High Temperature Alarm
Method ❶ Enter the registered Password.
Method ❷ Enter the registered Card key.
Method ❸ Press the interior Ⓘ button for 5 seconds.
Note
Note
•Even after a door was locked by the Auto Lock function, please check again
if the door was completely locked.
16
•If a door is open when the Auto Lock is not properly operated, the Trespass Alarm might go off.
•If the Back body is exposed to direct sunlight for a long time, the temperature sensor may operate and
go off an alarm.
•Even when the Inside Forced Lock mode is set, the lock status will automatically be released if the High
Temperature Alarm goes off.
•If the alarm goes off due to damage, fire, or trespass, the numbers on the keypad will light up clockwise.
(It repeats the status for 30 minutes with alarm sound.)
17
Safety Feature
3-minute Lock Feature
At 3-minute Lock mode, no button, besides those in the back body, will work.
》 3-minute Lock Mode Display
•If a Password or a Card key that is yet
to be registered is entered for 5
consecutive times, 3-minute Lock mode
is on and nothing will work for 3 minutes.
2 minute
passes.
1 minute
passes.
To Release 3-minute Lock
Method ❶ Press the Open/Close button.
Method ❷ Press the Back body Ⓘ button.
3 minute Lock starts.
2 minutes left.
1 minutes left.
The number [3]
lights up.
The number [2]
lights up.
The number [1]
lights up.
Open Door with fake Password
Extra Features
It is the most effective feature when you are concerned about your Password being accidentally exposed
when you have company or in the similar situations.
Option
》 To Open Door with fake Password
20
Remote Control Module
Order
Play
Description
Remote Control
Emergency Power
1⃞ Touch with a palm
Touch the keypad with your palm gently.
22
Emergency Power Supply for
Discharged Batteries
2⃞ Enter the fake Password
and a Password
Method ❶ Enter the fake Password ➞ Password
Method ❷ Enter the Password ➞ fake Password
3⃞ Touch with a palm
Touch the keypad with your palm gently or
press [ ] button to end.
Note
•3-minute Lock mode won’t affect any alarm and is sustained even after the product is rebooted.
•Once 3-minute Lock mode is on, the fake Password mode won’t work until the next normal verification
(Card key verification, normal Password, open door from inside). In this case, please open a door with your correct Password.
18
Product Specification
23
Option
Remote Control Module
Remote Control(Option)
Buy the Remote control Module and install it to link the remote control.
Not only FSK method but also the wireless encryption algorithm has been applied.
Extra Features
Option
》 To Register Remote Control
Order
1⃞ Press
Remote control Module
》 Install Remote Control Module
1⃞ Remove batteries
2⃞ Install Remote Control Module
Open the battery cover
in the back body
and remove
all batteries.
Equip the Remote control Module
to the slot.
Play
Open the battery cover in the back body.
Press
button.
button
2⃞ Enter number 0 and
5 on the keypad
Enter the number 0 and then, 5 button on the
keypad.
3⃞ Register Remote Control
4⃞ Press
Description
Press the SET button of the remote control
Press the
button in the back body again to
complete the procedure.
button
》 To Release Remote Control
3⃞ Insert batteries
4⃞ Confirm the installation
Insert all the batteries by
checking the [⊕, ⊖]
connector.
If you hear a‘ting-a-ling’
sound, the Remote control
Module has been installed
correctly. Close the
battery cover.
Ting-a-ling
Note
•The operation status may only be examined through the remote control.
20
Order
1⃞ Press
button
Play
Description
Open the battery cover in the back body.
Press
button.
2⃞ Enter number 7, 5
on the keypad
Enter the number 7, 5 on the keypad.
4⃞ Press
Press the
button in the back body again to
complete the procedure.
button
Note
•The wireless encryption algorithm resorts to the floating ID technology where the wireless
Password is changed every time the remote control is operated.
21
Specifications
Emergency Power Supply for Discharged Batteries
Specifications
You may open a door by contacting the 9V battery
》 To Supply Emergency Power
Order
Parts
Play
Description
1⃞ Contact the
9V battery
Open the emergency cover. Keep contacting the 9V
battery onto the emergency power supply terminal.
2⃞ Touch with palm
Touch the keypad of the front body gently with your palm.
registered Password.
4⃞ Press
Front (Front Body)
19(D)×64.6(W)×160.2(H)
Zinc die-casting
Back (Main Body)
36(D)×85(W)×158(H)
Fiber-glass plastic
Battery
Option
3⃞ Enter the
button
Enter the registered Password.
Press the
button.
(Please maintain the 9V battery contact until the motor activation is completed)
》 To Replace Battery
Specifications
Remote Control
Extra Features
Emergency Power
Remarks
Operating temperature :
-15~55℃ (5~131˚F)
4EA 1.5V AA alkaline batteries
(Operating voltage: 4.5 ~ 6 V)
Last up to 1 year
(10 times used a day)
Wireless
Optional
※ Battery life may vary depending on temperature, moisture levels,
frequency of use and the quality of the batteries.
※ Please make sure that all parts are included when purchasing the product.
※ Optional products may not be available depending on your country or local dealer.
※ RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCODING TO THE NATIONAL CODE OR
RECYCLING PROGRAM.
1⃞ Expiry Period
The product uses four 1.5V(LR6) alkaline AA batteries.
They may sustain 1 year if used 10 times a day.
(Users are advised to use authentic alkaline batteries.)
2⃞ Low Battery Alarm
One-on-one real-life size
1.5V(LR6) alkaline AA battery
Low Battery Lamp (red)
You must replace all 4 batteries for the following cases:
* The Low Battery Lamp on the front body lights on
* The Low Battery Lamp on the back body flickers red
* The alarm melody goes off
(a nursery rhyme starting with ting-a-ling melodies)
back body
front body
Note
•The battery duration varies in the temperature, humidity, the number of use, and the quality of the battery.
22
23