American Dryer Corp. AD-15 Parts Manual

AD-15 Parts Manual

24 VAC Phase 5

For models as of July 1, 2002

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: [email protected]

www.amdry.com

ADC Part No. 451101

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO.

AD-15

RESELLER’S NAME _______________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)

678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

OPL Control Door Assembly ................................................................................................................. 3

Coin Control Door Assembly ................................................................................................................. 4

Phase 5 Coin Microprocessor Control Panel Assembly .......................................................................... 5

Phase 5 OPL Microprocessor Control Panel Assembly .......................................................................... 6

Phase 5 Coin and OPL Microprocessor Control Box Assembly .............................................................. 7

Control Vault Assembly .......................................................................................................................... 8

Dual Timer “Tap Touch” Controls ........................................................................................................... 9

Non-Microprocessor Coin Meter Control Panel Assembly ................................................................... 10

Non-Microprocessor Control Box Assembly ....................................................................................... 11

Slide Meter Case Assembly ................................................................................................................. 12

Main Door Assembly ........................................................................................................................... 13

Main Door Switch Assembly ................................................................................................................ 14

Front Panel Assembly .......................................................................................................................... 15

Basket (Tumbler)/Support Assembly .................................................................................................... 16

OPL Drop Lint Door Assembly ............................................................................................................ 17

Coin Drop Lint Door Assembly ............................................................................................................ 18

Lint Trap Assembly .............................................................................................................................. 19

Basket (Tumbler) Bearing Assembly ..................................................................................................... 20

Idler Bearing Assembly ........................................................................................................................ 21

Non-Reversing Motor Mount Assembly .......................................................................................... 22, 23

Sensor Bracket Assemblies ............................................................................................................. 24, 25

Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 26, 27

Electric Oven Assembly .................................................................................................................. 28, 29

DSI Control Module Assembly ............................................................................................................ 30

Single-Phase (1ø) Motor, Electric Relay Panel Assembly ...................................................................... 31

3-Phase (3ø) Motor, Electric Relay Panel Assembly ............................................................................. 32

Slide Meter Control Box Assembly ...................................................................................................... 33

Steam Coil/Air-Operated Steam Damper Assembly ........................................................................ 34, 35

Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 36, 37

Outer Top/Back Guard Assembly ........................................................................................................ 38

Coin Meter Replacement Parts ............................................................................................................ 39

Transformer Usage Listing for Gas/Steam Dryers .................................................................................. 40

Transformer Usage Listing for Electric Dryers ....................................................................................... 41

Electric Oven Component Application Chart ........................................................................................ 42

Additional Parts Available .................................................................................................................... 43

OPL Control Door Assembly

Illus. No.

Part No.

Qty.

1

2

881053

870011

883388

1

1

1

5

6

7

3

4

8

9

451101-2

883389

883390

817180

117604

150317

102603

102601

102502

150321

154011

1

1

1

4

2

1

1

1

2

2

Description

ADC Logo ONLY (with double adhesive tape)

Logo Double Tape Kit...Not Illustrated

White Control Door

(includes illus. nos. 2 and 3)

Coral Blue Control Door


Ivory Control Door


Stainless Steel Control Door


Neoprene Sponge Tape (sold by the foot)

#10-16 x 3/4” TORX Plus BTN Type 1

Control Door Rod Catch

Control Door Rod Retainer Clip

Control Door Support Rod

#10-32 x 1/2” Phillips Machine Screw

#10-32 Multi-Thread U-Nut

Telephone: (508) 678-9000 / www.amdry.com

3

Coin Control Door Assembly

Illus. No.

Part No.

Qty.

1

2

3

4

160015

160104

160016

881053

870011

883416

883417

1

1

1

1

1

1

1

5

6

7

8

9

10

11

883418

883419

883525

117604

152014

150317

102603

102601

102502

1

1

4

2

1

1

6

1

1

4

Description

High Security MK-100 Lock Assembly with Key (for coin models Only)

MK-100 Key ONLY

Lock Cam ONLY

ADC Logo with Tape

Double Sided Tape Kit...Not Illustrated

White High Security Control Door Assembly with Black Trim

(includes illus. nos. 4 through 7)

Stainless Steel High Security Control Door with Black Trim


Coral Blue High Security Door Assembly with Black Trim


Ivory High Security Door Assembly with Black Trim


Top Black Trim Strip with Lock Hole

Sponge Tape (sold by the foot)

1/4-20 with 3/4” Free Spin Wash Nut





American Dryer Corporation 451101-2

Phase 5 Coin Microprocessor Control Panel Assembly

3

4

7

8

5

6

9

10

Illus. No.

1

2

Part No.

112526

883537

883538

883539

883540

150309

137213

824998

153010

150005

883363

881143

137023

137021

122800

136048

Qty.

1

1

1

2

1

1

1*

3*

1

1

1

1

1

2

1

1

Description

Coin Keyboard Label Assembly

Phase 5 Coin Control Panel Assembly

(includes illus. nos. 1, 2, 4 through 6 and 11)

Phase 5 Coin Control Panel Assembly ONLY with Battery Option

(includes illus. nos. 1, 2, 4 through 6 and 11)

Coin Control Panel ONLY

Coin Control Panel with Battery Bracket

#10-16 x 1/2” Hex Head Crimptite Screw

Phase 5 Coin Controller ONLY

Phase 5 Battery Clip

#6 Star Washer

#6-32 x 1/4” Phillips Round Head Machine Screw

Microprocessor Coin Acceptor with Optical Switch

Optic Switch ONLY

Optic Switch Connector ONLY

Microprocessor Socket ONLY

Pin/Socket Extraction Tool...Not Illustrated

1/8-Amp (Slo-Blo) Fuse ONLY 11

* For dual coin models, double the quantity.

IMPORTANT: Check label on computer chip to verify correct part number for controller.

451101-2 Telephone: (508) 678-9000 / www.amdry.com

5

Phase 5 OPL Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

1 112535

112276

112275

1

1

1

2

112277

112278

801255

801256

801206

1

1

1

1

1

3

6

7

4

5

801207

137222

137231

824998

153010

150005

150300

136048

1

1

1

2

2

1

1

1

Description

OPL English Keyboard Label Assembly

OPL Stick-On Labels (English Only)...Not Illustrated

3-Language OPL Stick-On Labels...Not Illustrated

(Spanish, Italian, and Hebrew)


(English, Spanish, and Hebrew)


(Italian, Dutch, French, German, and Chinese)

Phase 5 Microprocessor Control Panel ONLY

Phase 5 Microprocessor Control Panel ONLY with Battery Bracket

Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly

Complete


Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete


Phase 5 OPL Non-Reversing Controller ONLY

Phase 5 OPL Reversing Controller ONLY

Phase 5 Battery Clip

#6 Star Washer


#10-16 x 1/2” Hex Washer TEK Screw

1/8-Amp (Slo-Blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller.

6 American Dryer Corporation 451101-2

Phase 5 Coin and OPL Microprocessor Control Box Assembly

Illus. No.

Part No.

Qty.

1 -------1

8

9

10

11

12

13

14

15

16

17

4

5

6

7

2

3

150300

120715

150002

151000

136057

150301

136008

122641

122706

131931

150309

137035

323583

150300

132002

150300

* As required.

451101-2

2

1

2

2

*

*

*

1

*

1

2

1

1

2

1

2

Description

24 VAC Control Voltage Transformer

(refer to Transformer Usage Listing for Gas/Steam Dryers on

page 40)

(refer to Transformer Usage Listing for Electric Dryers on page 41)


30-Position Terminal Block

#6-32 x 1” Phillips Round Head Screw

#6-32 Pal Nut

1/2-Amp (Slo-Blo) Fuse

#8-18 x 7/16” Self Drilling Screw

Fuse Block/Strip ONLY

15-Pin Microprocessor Connector

Sockets ONLY

Steam Valve Relay - 24 VAC (for mechanical steam damper models Only)


Motor Capacitor (for mechanical steam damper models Only)

Capacitor Bracket (for mechanical steam damper models Only)


Transformer (for mechanical steam damper models 208 volts and higher)



7

Control Vault Assembly

Illus. No.

1

2

3

4

7

8

9

5

6

Part No.

802112

802117

802110

802115

160028

875061

160105*

802020

802019

125915

802018

152014

102502

102601

102603

Qty.

1

1

1

1

1

1

1

1

1

1

1

4

1

1

1

Description

Microprocessor Coin Vault Assembly Complete


Microprocessor Coin Vault ONLY

Non-Microprocessor Coin Vault Assembly Complete


Non-Microprocessor Coin Vault ONLY

Cam ONLY for 1/4 Turn Lock

1/4 Turn Lock with Key and Cam

1/4 Turn Mer-Pel Key ONLY

1/4 Turn Coin Box Assembly


1/4 Turn Coin Box ONLY without Faceplate

High Security (Greenwald) Coin Box ONLY with Key

1/4 Turn Coin Box Faceplate ONLY

1/4-20 Free Spin Wash Nut




* Specify key number when ordering.


Dual Timer “Tap Touch” Controls

Illus. No.

Part No.

Qty.

3

4

5

1

2

6

7

8

124030

124025

824175

122301

131932

120730

151000

882903

1

1

3

1

1

1

6

1

9

10

11

12

13

14

15

451101-2

850392

153010

152000

150207

150110

112563

124104

124105

1

2

3

2

4

1

1

1

Description

15 Minute Timer - 24 VAC

60 Minute Timer - 24 VAC

Red Pilot Light - 24 VAC

“Tap Touch” Switch

Relay SPST 24v


#6-32 Pal Nut

Dual Timer Panel Complete


Dual Timer Panel ONLY

#6 Star Washer

#6-32 Hex Nut

#10-24 x 1/2” Phillips Pan Head Machine Screw


Dual Timer Panel Overlay

Pure Touch Knob with Red Pointer

Pure Touch Knob with Blue Pointer


9

Non-Microprocessor Coin Meter Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

4

5

6

7

8

9

10

11

12

1

2

3

123005

122400

824172

824109

131932

154001

123225

125601

153010

152016

120712

150300

122602

122700

122801

1

1

7

1

2

1

2

1

1

2

1

1

1

1

1

Red Indicator Light - 24 VAC

Rocker Heat Selector Switch

Coin Meter Control Panel Assembly Less Coin Meter

(includes illus. nos. 1 through 5 and 7 through 9)

Coin Meter Control Panel ONLY

24 VAC Relay

#10-24 Speed Nut (used on P/N 131932, 24 VAC Relay)

Green Push-To-Start Button

25¢ Coin Meter - 24 VAC (specify timing)

#6 Star Washer

Hex Nut



9-Pin Connector

Pin Terminal ONLY


NOTE: For Coin Meter Replacement Parts refer to page 39.


Non-Microprocessor Control Box Assembly

Illus. No.

Part No.

Qty.

Description

5

6

3

4

1

2

122603

122701

122801

315010

150300

150300

---------

11

12

13

14

15

16

17

18

19

7

8

150309

131931

9 136008

10** 136057

150301

150002

120715

151000

132002

150300

137035

323583

150300

1

9

1

1

2

2

1

1

2

1

*

2

2

1

*

*

1

2

2

1

9-Pin Socket Connector

Socket Terminal ONLY


9-Pin Connector Bracket



24 VAC Control Voltage Transformer


page 40)

(refer to Transformer Usage Listing for Electric Dryers on page 41)


Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC


1/2-Amp (Slo-Blo) Fuse ONLY

#8-18 x 7/16” Phillips Pan Head TEK Screw

#6-32 x 1” Phillips Round Head Machine Screw


#6-32 Pal Nut

Transformer (for mechanical steam damper 208 VAC and higher)


Motor Capacitor (for mechanical steam damper models Only)

Capacitor Bracket (for mechanical steam damper models Only)


* As required.

** Check fuse on dryer for verification.


11

Slide Meter Case Assembly

Illus. No.

Part No.

Qty.

Description

23

24

25

20

21

22

15

16

17

18

19

10

11

12

13

14

3

4

5

1*

2

8

9

6

7

315404

--------

123005

122400

--------

801701

102502

102601

102603

883044

883038

883039

883040

160199

160099

125908

122643

122642

152014

122631

131917

883034

883035

883036

122603

122701

883165

154203

801700

1

1

1

9

1

4

2

1

1

1

1

1

21

1

6

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Key ONLY for Slide Meter Lock

Lock/Key/Cam and Hardware

Slide Meter Accumulator - 24 VAC

Mate-N-Lok Pin ONLY

9-Pin Mini-Universal Connector


6-Pin Connector (Mate-N-Lok)

Push-To- Start Relay - 24 VAC

White Slide Meter Case

Coral Blue Slide Meter Case

Ivory Slide Meter Case

9-Pin Connector (Mate-N-Lok)


Slide Meter Case ONLY with Door Less Lock

1/4” Drive Rivet

Slide Meter Extension ONLY with Mirror


Stainless Steel Mirror ONLY

Typical Slide Meter Coin Chute (not available from ADC)

Red Indicator Light - 24 VAC

Rocker Heat Selector Switch

Typical Slide Meter Coin Box (not available from ADC)

Slide Meter Case Mounting Plate




Slide Meter Extension

White Slide Meter Timer Door

Coral Blue Slide Meter Timer Door

Ivory Slide Meter Timer Door

* Specify key number when ordering.


Main Door Assembly

3

4

5

6

3

3

1

1

1

2

3

3

1

1

2

1

1

1

1

1

1

881150

102354

170731

881152

150445

153031

881151

150445

150683

152014

151010

150120

150683

152014

881210

102211

170731

13

Main Door Switch Assembly

Illus. No.

Part No.

Qty.

3

4

5

1

2

6

7

150006

152013

153010

137005

122636

881211

150301

2

1

2

2

2

1

2

14

Description

#6-32 x 7/8” Phillips Pan Head

#6-32 Hex Nut

#6 Star Washer

Single-Pole Door Switch (SDS)

Flag Terminal

Main Door Switch Housing



Front Panel Assembly

Illus. No.

Part No.

Qty.

1 883553

881287

1

1

2

3

4

5

6

7

8

451101-2

883554

883555

154215

881987

150300

150309

881152

881208

150445

150443

881151

881209

1

1

2

1

1

8

1

1

4

4

1

1

Description

White Front Panel Assembly


Stainless Steel Front Panel Assembly


Ivory Front Panel Assembly


Coral Blue Front Panel Assembly


5/32” x 1/4” Rivet

Friction Door Latch Kit



#10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw

Black Top Hinge Block Assembly

Stainless Steel Top Hinge Block Assembly

1/4-20 x 7/8” Black Cap Head Setscrew

1/4-20 x 7/8” Stainless Steel Cap Head Setscrew

Black Bottom Hinge Block Assembly

Stainless Steel Bottom Hinge Assembly


15

Basket (Tumbler)/Support Assembly

Illus. No.

1*

2

3

7

8

9

10

4

5

6

Part No.

800700

800850

800812

800860

150313

301307

301407

100900

153001

800610

152004

153002

153001

116002

401010

Qty.

1

1

1

1

4

1

1

4

4

24

4

4

4

4

1

Description

Galvanized Basket (tumbler) ONLY (without felt collar)

Stainless Steel Basket (tumbler) ONLY (without felt collar)

Galvanized Basket (tumbler) and Support Assembly


Stainless Steel Basket (tumbler) and Support Assembly



Galvanized Basket (tumbler) Rib ONLY

Stainless Steel Basket (tumbler) Rib ONLY

5/16-18 x 17-1/2” Tie Rod

5/16” Flat Washer

Basket (tumbler) Support ONLY

5/16-18 Hex Nut

5/16” Lock Washer

5/16” Flat Washer

Felt Collar ONLY

#847 Adhesive for Felt Collar (5.0 oz. tube)...Not Illustrated

* Felt collar is not included and must be ordered separately.


OPL Drop Lint Door Assembly

Illus. No.

Part No.

Qty.

1

2

3

4

5

6

7

451101-2

800150

160003

160104

160008

160009

150425

157000

883564

883565

883566

883141

117604

150419

150418

108120

1

1

1

1

1

1

1

1

1

1

1

1

1

7

2

Description

Knob Latch Kit Assembly


Dummy Lock ONLY (for non-coin models Only)

MK-100 Key ONLY (for dummy lock)

Lock Cam for Dummy Lock

Knob Latch Adjustable Cam ONLY

#12-24 x 3/8” Round Head Machine Screw ONLY

(screw for knob latch adjustable cam)

Drop Lint Door Spring

White Drop Lint Door Assembly without Trim


Ivory Drop Lint Door Assembly without Trim


Coral Blue Drop Lint Door Assembly without Trim


Stainless Steel Lint Door Assembly without Trim


Neoprene Sponge Tape (sold by the foot)

#6 x 1/2” Tamperproof TEK Screw

Tamperproof Screw Hand Driver...Not Illustrated

Chain for Drop Lint Door (10-1/2” length)


17

Coin Drop Lint Door Assembly

Illus. No.

Part No.

Qty.

1

2

3

4

5

6

7

8

9

160001

160103

160008

108120

883421

883423

883424

883422

152014

117604

117603

883531

150419

150418

1

1

10

7

3

2

2

1

1

1

1

1

1

1

18

Description

Lock Assembly with Key

Key ONLY

Cam ONLY

Chain for Drop Lint Door

White Drop Lint Door Assembly with Black Trim


Ivory Drop Lint Door Assembly with Black Trim


Coral Blue Drop Lint Door Assembly with Black Trim


Stainless Steel Drop Lint Door Assembly with Black Trim


1/4-20 with 3/4” Free Spin Wash Nut

Noise Suppression Tape (sold by the foot)

1/8” x 9/16” Sponge Tape (sold by the foot)

Black Drop Lint Door Trim




Lint Trap Assembly

Illus. No.

1

4

5

2

3

6

7

Part No.

800425*

800426*

Qty.

1

1

800400** 1

800403** 1

154200

150300

6

3

304100

800500

1

2

150419

150418

108120

2

1

1

Description

Choked Lint Trap Assembly Complete

(includes illus. nos. 1 and 3 through 5)

Choked Lint Trap ONLY

Lint Trap Assembly Complete


Lint Trap ONLY

5/32” Pop Rivet


Lint Screen Holder ONLY

Lint Screen ONLY



Chain for Drop Lint Door

* For gas models ONLY.

** For electric models and steam models ONLY.


19

Basket (Tumbler) Bearing Assembly

9

10

11

12

13

14

15

16

17

18

Illus. No.

Part No.

Qty.

3

4

5

1

2

6

7

8

153002

880213

153002

152004

150501

153002

153004

801100

3

3

4

3

1

4

4

1

801105

150610

152004

150501

880201

153002

152004

101100

154301

100713

100108

2

1

1

3

1

2

3

1

3

1

2

20

Description

5/16” Lock Washer

1-1/4” Flange Bearing ONLY

5/16” Lock Washer

5/16-18 Hex Nut

5/16-18 x 3/4” Hex Head Machine Bolt

5/16” Lock Washer

3/8” Flat Washer

1” Bearing Box Assembly Complete


Bearing Box ONLY

5/16-18 x 1-1/2” Allen Setscrew

5/16-18 Hex Nut


1” Flange Bearing ONLY

5/16” Lock Washer

5/16-18 Hex Nut

18” Pulley ONLY

5/16-18 x 1” Setscrew

1/4” x 1/4” x 7/8” Key

5L-680 V-Belt (basket [tumbler] to idler)


Idler Bearing Assembly

Illus. No.

Part No.

Qty.

3

4

5

6

1

2

100108

101129

100110

154301

100705

882576

1

2

1

1

1

1

10

11

12

7

8

9

451101-2

150617

153005

153004

801009

152004

150509

2

2

2

1

1

2

Description

5L-680 V-Belt (idler to basket [tumbler])

9” x 2-1/2” Compound Pulley

4L-500 V-Belt (idler to motor)

5/16-18 x 1” Allen Setscrew

3/16” x 3/16” x 1-3/8” Key

Idler Bearing Assembly Complete


3/8-16 x 1” Hex Head Machine Bolt

3/8” Lock Washer

3/8” Flat Washer

Idler Square Washer

5/16-18 Hex Nut

5/16-18 x 3” Hex Head Machine Bolt


21

Non-Reversing Motor Mount Assembly

Illus. No.

Part No.

Qty.

1

2

100110

100701

1

1

3 101104

101132

101133

1

1

1

4

5

6

7

101131

150501

153002

153001

181049

100066

1

4

1

1

4

4

22

Description

4L-500 V-Belt (motor to idler)

3/16” x 3/16” x 1” Key

(for use on 3ø models Only)

1/2” x 2” Motor Pulley

(for use on 1ø - 60 Hz motors Only)

5/8” x 2” Motor Pulley

(for use on 3ø - 60 Hz motors Only)

5/8” x 2-1/4” Motor Pulley

(for use on 100066 and 100007 - 50 Hz motors Only)

1/2” x 2-1/4” Motor Pulley

(for use on 181049 - 50 Hz motors Only)


5/16” Lock Washer

5/16” Flat Washer

1/2 HP 100-230v 1ø 50/60 Hz Plug-Type Motor

1/2 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Plug-Type

Motor

(for 50 Hz models mfd. prior to August 22, 2002)


Non-Reversing Motor Mount Assembly (continued)

Illus. No.

Part No.

Qty.

8

9

10

11

12

13

14

15

122701

122801

137030

152004

153002

153001

117604

154000

800908

803930*

880819

803801*

803800*

1

1

4

4

1

4

4

4

8

1

1

1

1

19

20

21

22

16

17

18

153050

100604

100702

153050

152006

120200

100007*

2

1

1

2

2

1

1

* Specify voltage when ordering.

Description



8-Pin Housing Connection

5/16-18 Hex Nut

5/16” Lock Washer

5/16” Flat Washer

1/8” x 3/8” Sponge Tape (sold by the foot)

5/16-18 Tinnerman Nut

1/2 HP Motor Mount ONLY (56Z frame)

1/2 HP 115-230v 1ø 50/60 Hz Motor Mount Assembly Complete with Plug

Motor


1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor


1/2 HP 208/230/380/460v 3ø 60 Hz Motor Mount Assembly Complete


1/2 HP 208/230/380/460v 3ø 50 Hz Motor Mount Assembly Complete


1/2” Flat Washer

12-1/2” Impellor with 1/2” Bore

1/8” x 1/8” x 1-1/2” Key

1/2” Flat Washer

1/2-20 Left Hand Jam Nut

3/8” 90° Connector

1/2 HP 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame)


23

Sensor Bracket Assemblies


Sensor Bracket Assemblies

16

17

18

19

20

21

22

23

24

11

12

13

14

15

Illus. No.

Part No.

Qty.

1 880251 1

6

7

8

9

10

2

3

4

5

305007

122604

122700

150301

150005

130111

130100

130103

130101

153010

152000

840065

121028

122701

122605

840062

130103

153010

152000

121028

122701

122605

154007

150005

801425

1

1

1

5

1

5

5

1

1

4

2

1

4

4

1

1

2

2

1

4

1

1

2

2

2

25

26

27

28

801418

305007

122604

122700

122801

150301

1

4

1

2

1

1

Description

1/4” Temperature Sensor Probe Assembly


225° Automatic Reset Thermostat

#6 Star Washer

#6-32 Hex Nut

Insulated Terminal ONLY


4-Pin Socket Connector ONLY

1/4” Push On Fastener

#6-32 x 1/4” Round Head Machine Screw

Microprocessor Sensor Bracket Assembly Complete


Universal Sensor Bracket ONLY

4-Pin Connector ONLY

Pin Terminal ONLY


#6-32 x 1/4” Round Head Machine Screw

130° Thermostat

150° Thermostat

225° Automatic Reset Thermostat

180° Thermostat

#6 Star Washer

#6-32 Hex Nut

Sensor Jumper ONLY

Insulated Terminal ONLY


4-Pin Socket Connector ONLY

Sensor Bracket Harness Assembly


Noncomputer Sensor Bracket Assembly Complete (includes thermostats)


Universal Sensor Bracket ONLY

4-Pin Connector ONLY

Pin Terminal ONLY




25

Direct Spark Ignition (DSI) Burner Assembly


Direct Spark Ignition (DSI) Burner Assembly

14

19

20

21

22

23

15

16

17

18

5

6

7

8

1

2

3

4

9

10

11

12

13

Illus. No.

Part No.

Qty.

24

25

26

27

883146

850850

874051

809308

880330

150300

318700

154004

802799

122200

150303

105500

319202

154002

802800

802801

319704

150001

130201

151000

141104

150108

151001

140811

140848

141230

150309

318716

128927

880960

142707

142500

142754

142600

883145

1

1

2

1

1

1

1

1

6

1

1

1

1

1

1

1

1

2

1

2

5

1

1

2

1

1

1

1

2

1

1

2

2

2

2

Description

Small Burner Tube

#8-32 x 1/2” Pan Head Machine Screw

#8-32 Pal Nut

#41 Natural Gas Burner Orifice

#54 Liquid Propane (L.P.) Burner Orifice

1/2” 2-Port Manifold

#10-16 x 1/2” Hex Head TEK Crimptite Screw

Gas Valve Bracket

1/2” 24 VAC Redundant Gas Valve (natural gas)

1/2” 24 VAC Liquid Propane (L.P.) Gas Valve

1/2” x 1-1/2” B.I. Nipple

1/2 x 90° Elbow

1/2” x 8” B.I. Nipple

1/2” Black Union

Natural Gas Burner Box Assembly Complete Less Orifice

(includes illus. nos.1 through 3 and 5 through 27)

Liquid Propane (L.P.) Burner Box Assembly Complete Less Orifice

(includes illus. nos.1 through 3 and 5 through 27)

Burner Box ONLY

Liquid Propane (L.P.) Conversion Kit

Ignitor Flame-Probe Assembly with Leads

High Voltage (HV) Wire and Connector Assembly


Pipe Bracket

Twin Speed Nut

Sail Switch Box Cover and Bracket ONLY

Sail Switch

#4 x 3/4” Pan Head Machine Screw

Sail Switch Actuator Rod

Sail Switch Damper (flat)


Sail Switch Box with Cover

Sail Switch Assembly Complete


Hi-Limit Mounting Bracket


330º Manual Reset Hi-Limit

#6-32 Pal Nut


27

Electric Oven Assembly


Electric Oven Assembly

19

20

21

22

23

14

15

16

17

18

27

28

29

30

24

25

26

9

10

11

12

13

7

8

5

6

Illus. No.

Part No.

Qty.

1

2

3

4

803003

--------*

--------*

150300

802800

802801

1

1

-

2

1

1

154004

150309

802799

122200

150303

105500

319202

154002

150300

803100

320611

150207

130400

150300

154001

121010

152014

--------*

150207

120081

120080

152008

121011*

--------*

153009

320607

2

1

3

1

2

1

1

2

1

2

-

1

-

-

-

-

-

2

1

1

1

2

1

1

1

2

Description

Small Electric Oven Box ONLY

Electric Oven Assembly Complete

Electric Element


Sail Switch Box with Bracket and Cover ONLY

Sail Switch Box Assembly Complete


Twin Speed Nut


Sail Switch Box Cover ONLY

Sail Switch ONLY

#4 x 3/4” Pan Head “A” Machine Screw

Sail Switch Actuator Rod

Sail Switch Damper (flat)



Electric Oven Front Cover ONLY

Large Relay Box Cover ONLY


290º Hi-Limit


#10-24 Speed Nut

L-70 Ground Lug


Oven Relay

#10-24 x 1/2” Phillips Pan Machine Screw

Internal Ceramic Insulator (2 per element)

External Ceramic Insulator (2 per element)

#10-32 Hex Nut (4 per element)

Bus Bar

Oven Wiring

#10 Star Washer (2 per element)

Small Electric Oven Right Side Cover ONLY

* Refer to Electric Oven Component Application Chart on page 42.


29

DSI Control Module Assembly

Illus. No.

Part No.

Qty.

3

4

1

2

152013

801048

150301

801711

2

1

2

1

30

Description

#6-32 Hex Nut

ADC Direct Spark Ignition (DSI) Control Module

#8-18 x 7/16” Phillips Head TEK Screw

Direct Spark Ignition (DSI) Module Mounting Plate


Single-Phase (1ø) Motor, Electric Relay Panel Assembly

Illus. No.

Part No.

Qty.

-

-

1

2

3

451101-2

132475

150299

824828

322809

150301

1

2

1

1

4

Description

2-Pole Contactor - 24 VAC

#10 x 1” Hex Head TEK Screw

RC Network with Connectors

(for microprocessor models Only)

Back Electrical Box Cover...Not Illustrated

#8-18 x 7/16” Phillips Head TEK Screw...Not Illustrated


31

3-Phase (3ø) Motor, Electric Relay Panel Assembly

Illus. No.

Part No.

Qty.

1

2

3

322812

132447

137015

1

1

1

4

5

6

7

8

9

10

11

12

150103

151001

153002

152004

120701

150008

151000

121300

---------

2

2

1

1

1

2

2

3

1

32

13

--

--

150300

322809

150301

2

1

4

Description

Back Electrical Box Component Mounting Plate

Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC

RC Filter

(for microprocessor models Only)


#8-32 Pal Nut

5/16” Lock Washer

5/16-18 Hex Nut


#6-32 x 1-1/4” Slotted Round Head Machine Screw

#6-32 Pal Nut

Open/Closed Bushing

Step-Down Transformer


page 40)




#8-18 x 7/16” Phillips Round Head TEK Screw...Not Illustrated


Slide Meter Control Box Assembly

Illus. No.

Part No.

Qty.

1

2

3

4

132475

150299

150300

--------

1

2

2

-

11

12

13

--

--

7

8

5

6

9

10

136057

150301

136008

150002

120715

151000

153002

152004

305520

322809

150301

* As required.

451101-2

*

*

*

2

1

2

1

1

1

1

4

Description

2-Pole Contactor - 24 VAC

#10 x 1” Hex Head Screw

#10-16 x 1/2” Hex Head Washer TEK Screw

24 VAC Transformer


page 40)


1/2-Amp (Slo-Blo) Fuse ONLY



#6-32 x 1” Round Head Machine Screw

30-Position Terminal Block ONLY

#6-32 Pal Nut

5/16-18 Lock Washer

5/16-18 Hex Nut

Rear Contactor Plate ONLY


#8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated


33

Steam Coil/Air-Operated Steam Damper Assembly


Steam Coil/Air-Operated Steam Damper Assembly

22

23

24

25

26

27

28

29

30

17

18

19

20

21

12

13

14

15

16

8

9

10

11

Illus. No.

Part No.

Qty.

3

4

5

1

2

6

7

165013

153002

152004

152002

153007

820321

880834

6

4

4

1

6

2

1

153007

100472

143110

100472

100496

143238

100498

150002

153010

152000

330987

152002

153007

100520

153007

152002

115995

102350

151006

152051

100495

323365

152002

1

1

2

2

2

1

2

2

1

2

1

1

1

1

1

1

1

2

2

4

4

48

1

Description

Steam Coil Assembly

5/16” Lock Washer

5/16-18 Hex Nut

1/4-20 Hex Nut

1/4” Lock Washer

Steam Damper Hinge Assembly

Steam Damper Assembly

(includes illus. nos. 7, 10, and 11)

1/4” Lock Washer

1/4-20 Hex Nut

Steam Damper Gasket (sold by the inch)

Steam Damper Foam (68-1/2” length)

5/16-24 Stainless Steel Acorn Nut

5/16-24 Right Hand Jam Nut

1-1/16” Diameter x 3” Stroke Piston

Left and Right Piston Support

1/4-20 Hex Nut

1/4” Lock Washer

1/4” Poly x 1/8” M.P.T. Connector

1/4” Poly-Flo Tubing

1/4” Poly x 1/8” M.P.T. Connector

1/8” Needle Valve

1/8” Brass Close Nipple

3-Way Micro Valve - 24 VAC

#6-32 x 1” Machine Bolt

#6 Star Washer

#6-32 Hex Nut

Micro Valve Support

1/4-20 Hex Nut

1/4” Lock Washer

1/8” N.P.T. Silencer (muffler) #N-25


35

Steam Coil/Mechanical Steam Damper Assembly


Steam Coil/Mechanical Steam Damper Assembly

Illus. No.

Part No.

Qty.

Description

3

4

5

1

2

6

7

22

23

24

25

26

17

18

19

20

21

27

28

29

30

31

12

13

14

15

16

8

9

10

11

165013

153002

152004

152002

153007

820321

880835

153022

154300

850268

150110

153012

312315

104054

100511

122120

150026

115995

102350

309300

154300

153022

104052

150110

153012

312315

122120

150026

153012

150102

--------*

1

6

6

4

4

2

1

48

1

1

1

1

1

2

2

1

1

1

1

2

2

1

1

1

1

2

1

2

2

2

1

Steam Coil Assembly ONLY

5/16” Lock Washer

5/16-18 Hex Nut

1/4-20 Hex Nut

1/4” Lock Washer

Steam Damper Hinge Assembly

Steam Damper Assembly

(includes illus. nos. 7, 10, and 11)

Steam Damper Gasket (sold by the inch)

Steam Damper Foam (68-1/2” - length)

Rod Bracket

1/2” x 3/32” Cotter Pin

#10 Flat Washer

Mechanical Steam Damper Actuator Rod

#8-32 x 1/4” Phillips Head Machine Screw

#8 Star Washer

Mechanical Steam Damper Motor Mount

#10 Flat Washer

1/2” x 3/32” Cotter Pin

Mechanical Steam Damper Arm

#8-32 x 1/4” Phillips Head Machine Screw

#8 Star Washer

Mechanical Steam Damper Motor Mount

Mechanical Steam Damper Motor

Mechanical Steam Damper Switch Plate

Mechanical Steam Damper Switch


Mechanical Steam Damper Switch


#8 Star Washer

#8-32 x 3/8” Pan Head Machine Screw

Mechanical Steam Damper Motor Cam

* The mechanical steam damper motor cam is part of the mechanical steam damper motor.


37

Outer Top/Back Guard Assembly

Illus. No.

Part No.

Qty.

Description

7

8

9

5

6*

1

2

3*

4

322809

150301

330076

150301

150301

312532

330086

150301

103500

10

1

1

13

4

1

4

1

7

Back Electrical Box Cover


Top Back Guard



Outer Top

“Plain” Bottom Back Guard


Leveling Leg

* There is no top back guard or outer top on steam models.


Coin Meter Replacement Parts

Illus. No.

Part No.

Qty.

1

2

3

4

451101-2

125541

125540

125500

125501

125502

125503

125504

125506

125507

125508

125510

125515

125516

1

1

1

1

1

1

2

1

1

1

1

1

1

Description

1/60 RPM 24 VAC/60 Hz Meter Motor

1/30 RPM 24 VAC/50 Hz Meter Motor

2-Point Cam

3-Point Cam

4-Point Cam

5-Point Cam

6-Point Cam

8-Point Cam

9-Point Cam

10-Point Cam

12-Point Cam

Meter Switch “B” with Arm

Meter Switch “A” or “C”


39

Transformer Usage Listing for Gas/Steam Dryers

HEAT VOLTAGE

208-240

380

380

416

416

460/480

460/480

575

WIRE

SERVICE

3 or 4

3

4

3

4

3

4

3

STEP DOWN TRANSFORMER

PART. NO.

---------

132059

132059

132062

132062

132053

132053

132050

CONTROL VOLTAGE

PART NO.

141403

141403

141403

141403

141403

141403

141403

141403


Transformer Usage Listing for Electric Dryers

KW VOLTAGE PHASE

18

15

15

15

18

18

18

18

15

12

12

12

12

11

208

208

240

416

460/480

208

208

380

400

208

240

240

380

400

3ø

3ø

1ø

3ø

3ø

1ø

3ø

3ø

3ø

3ø

3ø

1ø

3ø

3ø

WIRE

SERVICE

3

3 or 4

2

4

3

2

3

4

3

2

4

4

4

3

STEP DOWN TRANSFORMER

PART NO.

------

------

------

------

132053

------

------

------

------

------

------

------

------

------

CONTROL VOLTAGE

PART NO.

132070

132063

141403

132082

141403

141403

132063

132082

132082

141403

141403

132070

132082

132082


41

Electric Oven Component Application Chart

KW VOLTAGE PHASE

WIRE

SERVICE

OVEN

ASSEMBLY

18

18

15

15

12

12

18

18

18

12

11

460/480

416

240

208

208

380

208

240

240

208

400

3ø

3ø

3ø

3ø

1ø

3ø

1ø

3ø

1ø

3ø

3ø

3 or 4

4

3

3 or 4

2

4

2

3

2

3 or 4

4

883597

826389

883542

824914

883546

826389

883547

883543

883545

883544

826401

6

5

6

6

3

4

ELEMENT OVEN WIRE TERMINAL LUG BUS BAR

P/N:

QTY KW PART NO.

QTY SIZE PART NO.

QTY PART NO.

121011

6

6

6

3

3

3

120007

120007

120007

1

1

1

#8

#8

#8

882559

882558

882558

1

1

1

121010

121010

121010

2

1

2

3

6

3

3

3

3

4

3

4

2

120006

120006

120007

120006

120009

120007

120008

120004

1

1

1

1

1

1

1

1

#6

#2

#8

#4

#8

#6

#8

#8

882556

883384

882558

883385

882558

883548

882558

882558

1

1

1

1

1

1

1

1

121010

121010

121010

121010

121010

121010

121010

121010

1

1

1

1

2

2

2

1

OVEN RELAY

CAT. NO.

PART NO.

DPA33

DPA33

DPA43

DPA53

DPA93

DPA33

DPA73

DPA33

DPA53

DPA33

DPA33

131352

131352

131357

131359

131358

131352

131376

131352

131359

131352

131352


Additional Parts Available

Part No.

Description

120708

120800

120902

120903

121499

121500

121503

122804

404502

404515

404516

112280

112533

112534

114001

114006

114533

120100

120200

120300

120400

120500

120600

120707

“Lint Screen” Label

“Phase 5 Coin Program Location Summary” Label

“Phase 5 OPL Program Location Summary” Label

“Caution-Exhausted/Lint Screen” Label

“Warning-Fire Hazards” Label

“120V Electric Service” Label

3/8” Straight (BX) Connector

3/8” x 90° (BX) Connector

3/8” x 45° (BX) Connector

3/8” Red Jacket (BX) Insulator

3/8” Jiffy Clip (BX retainer clip)

3/8” Flexible Steel Electrical Conduit

Terminal Strip (2-position)

Terminal Strip (3-position)

1/4” In-Line Connector

#74B Wire Nut

Crimp-On Wire Nut

5-1/2” Harness Tie

8” Harness Tie

Harness Tie Mounting Clip

Manometer (hydro gauge) for Measuring Gas Pressure

White Brush-In-Cap Bottle Touch-Up Paint

Coral Blue Brush-In-Cap Bottle Touch-Up Paint

Ivory Brush-In-Cap Bottle Touch-Up Paint


43

ADC 451101 2 - 02/24/05-0

American Dryer Corp. AD-15 Parts Manual

AD-15 Parts Manual

24 VAC Phase 5

For models as of July 1, 2002

Retain This Manual In A Safe Place For Future Reference

Important

Table of Contents

Related manuals

Table of contents

American Dryer Corp. AD-15 Parts Manual

AD-15 Parts Manual

24 VAC Phase 5

For models as of July 1, 2002

Retain This Manual In A Safe Place For Future Reference

Important

Table of Contents

Related manuals

Camaflexi

SHK395

T & S Brass & Bronze Works

BL-9000-03

ADC

D3030

ADC

AD-15

American Dryer Corp.

24 VAC Phase 5 AD-330

American Dryer Corp.

Super AD-50

ADC

ADG-758

American Dryer

AD-170

American Dryer Corp.

AD-81

ADC

AD-24

ADC

AD-30V

Table of contents