advertisement
UD-80 Parts Manual
24 VAC Phase 5
1993/1994
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450134
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. The illustrations included in this manual may not depict your particular dryer exactly.
IMPORTANT
For your convenience, log the following information:
UD-80
DATE OF PURCHASE __________________________________________________ MODEL NO. _________________
RESELLER’S NAME _______________________________________________________________________________
Serial Number(s) _________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at +1 (508) 678-9447 or telephone your order directly to the ADC Parts
Department at +1 (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
IMPORTANT NOTE TO PURCHASER
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly .................... 16, 17
High Security Control Door Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
7
8
5
6
9
10
11
12
13
14
160017
160016
1 Special Dummy Lock ONLY
1 Lock Cam ONLY
1 UniDryer ® Logo ONLY 112312*
881053*
881052*
1 ADC Logo with Tape (for ALL Coin Models Only)
1 Metal ADC Logo with Tape (for ALL OPL Models Only)
870011 1 Logo Double Tape Kit ONLY
800020** 1 High Security Control Door Assembly
800144
(includes illus. nos. 4 through 7)
1 Stainless Steel High Security Control Door Assembly
180202
102307
150201
150300
102600
102601
102502
122116
(includes illus. nos. 4 through 7)
1 Top Trim Strip with Lock Hole (38-1/4 length)
3 Trim Bumper Gasket (sold by the foot)
6 #10-32 x 1/4” Phillips Round Head Machine Screw
4 #10 x 1/2” Hex Washer TEK Screw
1
1
Control Door Rod Support Catch
1 Control Door Rod Retainer Clip
1 Control Door Support Rod
Switch 24 VAC
(for models mfd. as of May 5, 1993)
323635
150300
1 Switch Box Cover
(for models mfd. as of May 5, 1993)
1 #16 x 1/2” Hex Washer TEK Screw
(for models mfd. prior to May 5, 1993)
* Logo tape kit is not included and must be ordered separately.
** Specify color when ordering.
2 American Dryer Corp.
450134-7
Lint Drawer/Door Assembly
Illus. No.
Part No.
Qty.
Description
1*
4
5
6
7
2*
3
880826
880840
150201
102307
180212
117604
150309
1 Lint Door Assembly
(includes illus. nos. 1 and 3 through 5)
1 Lint Drawer Assembly
6 #10-32 x 1/4” Phillips TEK Screw
3 Trim Bumper Gasket
1 Mid Trim Kick Plate
6 Neoprene Sponge Tape (sold by the foot)
6 #10-16 x 1/2” Hex Head TEK Crimptite Screw
* Specify color when ordering.
450134-7 www.amdry.com
3
Lint Drawer/Lint Coop Assembly
Illus. No.
Part No.
Qty.
Description
4
3
4
5
1
2
8
9
6
7
10
11
12
13
14
881017
881018
881019
881020
115993
154200
881021
150300
323626
121405
881022
802163
150300
154200
1
1
1
4
1
5
1
1
1
Lint Back Cover
Felt Stiffener
Felt Retainer
1 Wrapper Middle Support
1 Lint Drawer Felt
5/32” Pop Rivet
Right Side Lint Wall
#10 x 1/2” Hex Washer TEK Screw
1 Temperature Sensor Bracket ONLY
(refer to Sensor Bracket Assembly on page 22)
Large Rubber Grommet Only
Middle Side Lint Wall
Left Side Lint Wall
5 #10 x 1/2” Hex Washer TEK Screw
4 5/32” Pop Rivet
American Dryer Corp.
450134-7
Lint Drawer Switch Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
450134-7
323635
122116
151001
121405
1
1
2
1
Lint Drawer Switch Cover
Lint Drawer Switch
#8-32 Pal Nut
Large Rubber Grommet www.amdry.com
5
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
Description
3
6
7
4
5
1
2
112535
112276
112275
112277
112278
801255
801256
801207
824459
137231
824998
153010
150005
160005
136048
1 OPL English Keyboard Label Assembly
1 OPL Stick-on Labels (English Only) ... Not Illustrated
1 OPL Stick-on Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
1 3-Language OPL Stick-on Labels
(English, Spanish and Hebrew) ... Not Illustrated
1 5-Language OPL Stick-on Labels
(Italian, Dutch, French, German and Chinese) ... Not Illustrated
1 Phase 5 Microprocessor Control Panel ONLY
1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly with Battery Option Complete
(includes illus. nos. 1 though 6)
1 Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
1 Phase 5 Battery Clip
2 #6 Star Washer
2 #6-32 x 1/4” Phillips Round Head Machine Screw
1 Spring Turn Latch (2-piece)
1 1/8-Amp Fuse ONLY
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
6 American Dryer Corp.
450134-7
Phase 5 OPL Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
Description
1
8
9
10
4
5
6
7
2
3
* As required.
450134-7
141403
132023
150300
120715
150002
151000
136057
150301
136008
122641
122706
1 24 VAC Transformer (for 60 Hz models Only)
1 24 VAC Transformer (for 50 Hz models Only)
2 #10 x 1/2” Hex Washer TEK Screw
1 30-Position Terminal Block
2 #6-32 x 1” Phillips Round Head Machine Screw
2 #6-32 Pal Nut
* 1/2-Amp (Slo-Blo) Fuse ONLY
* #8-18 x 7/16” Phillips Pan Head TEK Screw
* Fuse Block and Strip Only
1 15-Pin Microprocessor Connector
* Mate-N-Lock Socket www.amdry.com
7
Front Panel Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
880817
880816
154215
170330
150309
121405
1 Right Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1, 2 and 3)
1 Left Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1, 2 and 3)
2 5/32” x 1/4” Pop Rivet
1 Friction Door Latch
9 #10-16 x 1/2” Hex Head TEK Crimptite Screw
1 Rubber Grommet
* Specify color when ordering.
8 American Dryer Corp.
450134-7
Main Door Switch Housing
Illus. No.
Part No.
Qty.
Description
7
8
3
4
5
6
1
2
9
10
450134-7
152013
153008
137005
121028
154281
800448
153565
313218
150201
121405
2
2
1
2
2
1
#6-32 Hex Nut
#6 Lock Washer
Singe-Pole Door Switch ONLY
Insulated Female Terminal
3/8” Standard Nylon Spacer
12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
2 #6-32 x 1” Self Clinching Stud
1 Main Door Switch Housing ONLY
2 #10-32 x 1/4” Phillips Pan Head TEK Screw
1 Rubber Grommet www.amdry.com
9
Main Door Assembly
Illus. No.
Part No.
Qty.
Description
10
1
4
5
6
2
3
7
8
9
881421
800448
150410
152014
102353
102212
170730
150448
170319
150431
1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
4 12-1/2” Stainless Steel Main Door Hinge Assembly
4 #10-24 x 3/8” Phillips Pan Head Taptite Screw
1 1/4-20 Free Spin Wash Nut
1 Main Door Gasket
1 20-7/16” Door Glass with (4) Holes
1 Main Door Glass Adhesive (10.3 oz. cartridge)
4 1/2” Stainless Steel Flat Head Allen Screw
4 Door Glass (Nylon) Spacer
1 Main Door Latch Screw
(#10 x 7/16” Dome Hex Head)
American Dryer Corp.
450134-7
Tumbler/Support Assemblies
Illus. No.
Part No.
Qty.
Description
1 880818*
4
5
6
2
3
7
8
9
10
11
--
880827
154210
301308
150500
100905
153004
800615
152005
153005
153004
116000
401010
1 Tumbler ONLY without Felt Collar
(includes illus. nos. 1, 2, and 3)
1 Reversing Tumbler and Support Assembly Complete
(includes illus. nos. 1 through 11)
40 5/32” x 3/16” Pop Rivet
4 Tumbler Rib ONLY
1 5/16-18 x 3/4” Socket Button Head Screw
4 3/8-16 x 37 Tie Rod
4 3/8” Flat Washer
1 Reversing Tumbler Support ONLY
4 3/8” Hex Nut
4 3/8” Lock Washer
4 3/8” Flat Washer
1 Felt Collar ONLY
1 #847 Adhesive (5 oz. tube)
* Felt collar is not included and must be ordered separately.
450134-7 www.amdry.com
11
Tumbler Bearing Assembly
12 American Dryer Corp.
450134-7
Tumbler Bearing Assembly
Illus. No.
Part No.
Qty.
Description
7
8
9
10
11
12
13
14
15
16
3
4
5
6
1
2
17
18
19
20
21
22
23
24
25
26
880220
153025
152050
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
801103
801105
801104
880779
880202
152004
150610
101118
101119
154301
100735
100106
824807
1
4
4
2
2
2
2
*
2
4
4
1-3/4” Flange Bearing ONLY
9/16” Lock Washer
9/16-12 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
2 3/8-16 Hex Nut
4 5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
2 5/16-18 x 1-1/2” Hex Head Machine Bolt
2 5/16-18 Hex Nut
1 1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
For models without Rotation Sensor Option
1 1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1 1-3/8” Bearing Box ONLY
1 Pillow Block Bearing Support ONLY
1 1-3/8” Pillow Block Bearing Assembly with Magnet
(for models mfd. as of April 5, 1993)
1 1-3/8” Pillow Block Bearing ONLY
(for models mfd. as of April 5, 1993)
2 5/16-18 Hex Nut
2 5/16-18 x 1-1/2” Allen Setscrew
1 18-3/4” Pulley
1 1-3/8” Taper Lock Hub (key not included)
2 5/16-18 x 5/16” Allen Setscrew
1 Shaft Key (for taper lock hub)
1 5L-690 V-Belt (to idler assembly)
1 Rotational Sensor Assembly
(for models mfd. as of April 5, 1993)
* As required.
450134-7 www.amdry.com
13
Idler Bearing Assembly
14 American Dryer Corp.
450134-7
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
Description
7
8
9
10
11
3
4
5
6
1
2
12
13
14
15
16
17
100106
101140
100114
154301
100705
301850
152002
153007
100214
150521
801007
150617
153005
153004
801009
152004
150509
1
1
1
2
1
1
3
3
2
5L-690 V-Belt (idler to tumbler)
14” x 3” Compound Pulley
4L-630 V-Belt (idler to motor)
5/16-18 x 5/16” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
5/8” x 3/4” Idler Shaft
1/4-20 Hex Nut
1/4” Lock Washer
5/8” Flange Bearing
3 1/4-20 x 2” Carriage Bolt
1 Idler Bearing Assembly Complete
(includes illus. nos. 5 through 17)
2 3/8-16 x 1” Hex Head Machine Bolt
2 3/8” Lock Washer
2 3/8” Flat Washer
1 Idler Square Washer
1 5/16-18 Hex Nut
1 5/16-18 x 3” Hex Head Machine Bolt
450134-7 www.amdry.com
15
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
16 American Dryer Corp.
450134-7
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Part No.
Qty.
Description
4
5
6
7
8
9*
10
11
12
13
14
15
16
17
18
1
2
3
19
20
21
22
23
24
100114
100701
101130
101139
120200
181003
150501
153002
153001
100023
120200
150501
153002
153001
154000
152004
153002
153001
800920
803959
803964
117604
153051
100705
100605
153050
152006
1
1
1
1
1
1
4
4
4
4L-630 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2-1/2” Motor Pulley (for 60 Hz models Only)
5/8” x 2-3/4” Motor Pulley (for 50 Hz models Only)
3/8” x 90° Connector
1/2 hp 208/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor (56Z frame)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1 3 hp 220/230/380/460v 3ø 50/60 Hz T.E.F.C. Motor with 3/4” Shaft (56Z frame)
1 3/8” x 90° Connector
4 5/16-18 x 3/4” Hex Head Machine Bolt
4 5/16” Lock Washer
4 5/16” Flat Washer
8 5/16” Tinnerman Nut
7 5/16” Hex Nut
7 5/16” Lock Washer
7 5/16” Flat Washer
1 Reversing Motor Mount ONLY (56Z frame)
1 60 Hz Reversing T.E.F.C. Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
1 50 Hz Reversing T.E.F.C. Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
5 Neoprene Sponge Tape (sold by the foot)
1 3/4” S.A.E. Flat Washer
1 3/16” x 3/16” x 1-3/8” Key
1 13” Impellor with 5/8” Bore
** 1/2” S.A.E. Flat Washer
2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** As required.
450134-7 www.amdry.com
17
UDG-80 Direct Spark Ignition (DSI) Upshot Burner Assembly
Illus. No.
Part No.
Qty.
Description
18
1
2
3
4
5
6
150300
130401
323643
323641
323644
140838*
140840*
140819*
140821*
140840*
140821*
140832*
140834*
140819*
140818*
19 #10 x 1/2” Hex Washer TEK Screw
1
1
1
1
2
330° Hi-Limit Thermostat ONLY
Oven Top Cover
Burner Front
Oven Inlet Cover
#3 (Natural Gas) Burner Orifice
(for 60 Hz models mfd. as of August 20, 1992)
2 #1 (Natural Gas) Burner Orifice
(for 60 Hz models mfd. prior to August 20, 1992)
2
2
2
2
1
1
1
1
#30 (Liquid Propane Gas) Burner Orifice
(for 60 Hz models mfd. as of April 1, 1993)
#28 (Liquid Propane Gas) Burner Orifice
(for 60 Hz models mfd. prior to April 1, 1993)
#1 (Natural Gas) Burner Orifice
(for 50/60 Hz models mfd. as of August 20, 1992)
#28 (Liquid Propane Gas) Burner Orifice
(for 50/60 Hz models mfd. as of August 20, 1992)
#4 (Natural Gas) Burner Orifice
(for 50 Hz models mfd. as of August 20, 1992)
#5 (Natural Gas) Burner Orifice
(for 50 Hz models mfd. as of August 20, 1992)
#30 (Liquid Propane Gas) Burner Orifice
(for 50 Hz models mfd. as of August 20, 1992)
#31 (Liquid Propane Gas) Burner Orifice
(for 50 Hz models mfd. as of August 20, 1992)
American Dryer Corp.
450134-7
UDG-80 Direct Spark Ignition (DSI) Upshot Burner Assembly (continued)
Illus. No.
Part No.
Qty.
Description
7
8
9
10
15
16
17
18
19
20
11
12
13
14
27
28
29
30
---
21
22
23
24
25
26
---
---
141247
141246
1
1
323642 1
880822** 1
1/2” 2-Port Swage Manifold
(for models mfd. as of August 20, 1992)
1/2” 2-Port Manifold
(for models mfd. prior to August 20, 1992)
Gas Valve Support Bracket
Gas Valve (Natural Gas) Manifold Assembly
880823** 1
332119
128928
881052
140411
1
(includes illus. nos. 7 through 15, 17, 18 and 29)
Gas Valve (Natural Gas) Manifold Assembly
(includes illus. nos. 7 through 15, 17, 18 and 29)
1 1-3/8” Hole Pipe Bracket
1 1/2” 24 VAC Redundant (Natural Gas) Gas Valve
(for models mfd. as of August 20, 1992)
1/2” DSI (Liquid Propane Gas) Gas Valve Assembly
140017
1 1/2” 24 VAC Gas Valve (Liquid Propane Gas) Conversion Kit
(for models mfd. as of August 20, 1992)
1 1” 24 VAC Redundant (Natural Gas) Gas Valve
140018
142715
142923
142808
142602
318317
319712
141302
331291
121492
880824**
880824**
150299
880815
141110
323600
1
1
1
2
1
1
1
1
1
2
1
1
(for models mfd. prior to August 20, 1992)
1” 24 VAC Redundant (Liquid Propane Gas) Gas Valve
(for models mfd. prior to August 20, 1992)
1/2” x 1/2” Nipple
1” x 1/2” Reducing Elbow
1” x 3” Nipple
1” Black Union
7/8” Hole Pipe Bracket
Burner Hi-Limit Bracket
1” Shutoff Valve
1-1/8” Hole Pipe Bracket
3/16” Nylon Clamp
UDG-80 Burner Assembly Complete (for 60 Hz models ONLY)
(includes illus. nos. 1 through 4, 16 and 23 through 28)
UDG-80 Burner Assembly Complete (for 50 Hz models ONLY)
(includes illus. nos. 1 through 4, 16 and 23 through 28)
#10 x 1” Hex Washer TEK Screw 4
1
2
ADC DSI (Direct Spark Ignition) Module ONLY (50/60 Hz)
Burner Tube
1 Manifold Retainer
323598
128915
305412
323599
323594
1
1
1
1
Burner Tube Holder
Ignitor and Flame-Probe Assembly
Ignitor Gap Feeler Gauge ... Not Illustrated
Burner Side Cover
150300
---------
880777*
880778*
1
2
6
–
1
1
Burner Louver (for 60 Hz models ONLY)
Burner Louver (for 50 Hz models ONLY)
#10 x 1/2” Hex Washer TEK Screw
Sail Switch Assembly
(refer to Sail Switch Assembly on page 23)
UDG-80 Liquid Propane Conversion Kit with Orifices
(for 60 Hz models mfd. as of August 20, 1992)
UDG-80 Liquid Propane Conversion Kit with Orifices
880763* 1
(for 50 Hz models mfd. prior to August 20, 1992)
UDG-80 Liquid Propane Conversion Kit with Orifice
(for models mfd. with the 1” Robershaw Gas Valve prior to August 20, 1992)
* Consult factory for elevations over 2,000 feet.
** Burner orifice is not included and must be ordered separately.
450134-7 www.amdry.com
19
UDS-80 Air Operated Steam Damper Assembly
20 American Dryer Corp.
450134-7
UDS-80 Air Operated Steam Damper Assembly
23
24
25
26
27
28
29
30
18
19
20
21
22
13
14
15
16
17
8
9
10
11
12
100472
143110
100470
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
165009
153002
152004
152002
153007
820321
803415
1
6
6
4
4
2
UDS-80 Steam Coil
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
UDS-80 Steam Damper Hinge Assembly ONLY
1 UDS-80 Steam Damper Assembly
(includes illus. nos. 7, 10 and 11)
4 1/4” Lock Washer
4 1/4-20 Hex Nut
108 Steam Damper Gasket (sold by the inch)
1 Steam Damper Foam (68-1/2” length)
1 7/16-20 Stainless Steel Acorn Nut
1 7/16-20 Hex Nut
1 1-1/4” Bore x 3” Stroke Piston
1 Piston Support Bracket
4 1/4-20 Hex Nut
4 1/4” Lock Washer
1 1/4” x 1/8” Connector
1 1/4” Tubing (sold by the foot)
1 1/4” x 1/8” Connector
1 1/8” Needle Valve
1 1/8” Close Nipple
1 3-Way Micro Valve – 24 VAC
2 #6-32 x 1” Slotted Head Machine Screw
2 #6 Star Washer
1 #6-32 Hex Nut
1 Micro Valve Support Bracket
2 1/4-20 Hex Nut
2 1/4” Lock Washer
1 1/8” N.P.T. Silencer (muffler)
450134-7 www.amdry.com
21
Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
Description
1 880251
22
2
3
4
5
6
7
8
9
10
11
12
122605
122701
122801
154007
150000
802174
323626
130103
153010
152000
150301
122604
122700
1 1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 through 4)
1 4-Pin Socket Connector ONLY
4 Socket Terminal ONLY
1 Pin/Socket Extraction Tool
2 1/4” Tinnerman Push-on Fastener
2 #6-32 x 1/4” Right Hand Machine Screw
1 Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 9)
1 Temperature Sensor Bracket ONLY
1 225° Large Automatic Thermostat
2 #6 Star Washer
2 #6-32 Hex Nut
2 #8-18 x 7/16” Phillips Pan Head TEK Screw
1 4-Pin Connector ONLY
4 Pin Terminal ONLY
American Dryer Corp.
450134-7
Sail Switch Assembly
Illus. No.
Part No.
Qty.
Description
7
8
5
6
3
4
1
2
9
10
450134-7
105500
319202
154002
802800
802801
150300
150303
122200
802799
150309
154004
1
1
1
1
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push-On Fastener
Sail Switch Box with Cover and Bracket ONLY
1 Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
2 #10 x 1/2” Hex Washer TEK Screw
2 #4 x 3/4” Pan Head “A” Machine Screw
1 Sail Switch ONLY
1 Sail Switch Box Cover and Bracket ONLY
2 #10-16 x 1/4” Hex Head TEK Crimptite Screw
1 Twin Speed Nut www.amdry.com
23
Microprocessor Reversing Rear Control Box Assembly
24
10
11
12
13
14
5
6
7
8
9
15
---
---
Illus. No.
Part No.
Qty.
Description
1
2
3
4
322812
137060
137013
132431
132432
150103
151001
153002
152004
132445
150103
151001
120701
150008
151000
121300
322809
150301
1 Back Electrical Box Component Plate
1 Arc Suppressor Board ONLY
2 Nylon Standoff
1 Reversing Contactor (208/230/240v, 50/60 Hz) – 24 VAC
1 Reversing Contactor Replacement Coil (208/230/240v, 50/60 Hz) – 24 VAC
2 #8-32 x 3/4” Phillips Round Head Machine Screw
2 #8-32 Pal Nut
1 5/16” Lock Washer
1 5/16-18 Hex Nut
1 3 hp Contactor ONLY
2 #8-32 x 3/4” Phillips Round Head Machine Screw
2 #8-32 Pal Nut
1 4-Position Terminal Block
2 #6-32 x 1-1/4” Slotted Round Head Machine Screw
2 #6-32 Pal Nut
3 Open and Close Bushing
1 Black Electrical Box Cover ... Not Illustrated
4 #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
American Dryer Corp.
450134-7
Top/Back Guard Assemblies
3
4
1
2
5
6
7
8
9
10
11
450134-7
Illus. No.
Part No.
Qty.
Description
312527
150301
314510
150301
322809
150301
314511
150301
103500
880939
104005
112519
1
8
1
8
1
8
4
1
Outer Top Assembly (for Gas Models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Rear Electrical Box Cover
8 #8-18 x 7/16” Phillips Pan Head TEK Screw
1 Lower Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Adjustable Leveling Leg
10” Damper Assembly (for Gas Models Only)
1 12” Damper Assembly (for Steam Models Only)
1 “Routine Maintenance Schedule” Label ONLY www.amdry.com
25
Part No.
Description
112039 “Black/White/Green Ground” Label
112280 “Clean Lint Screen” Label
112534 “Phase 5 OPL Program Location Summary” Label
114001 “CAUTION – Exhausted/Lint Screen” Label
114006 “WARNING – Fire Hazards” Label
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Crimp-on Wire Nut
121006 #10 Insulated Ring Terminal
121014 1/4” Insulated (female) Terminal
121026 Tab Receptacle Combination
121499 5-1/2” Harness Tie
121500 8” Harness Tie
121503 Harness Tie Mounting Clip
122804 Manometer (Hydro Gauge) for measuring Gas Pressure
404500 Almond Brush-In-Cap Bottle Touch-Up Paint
404502 White-Brush-In-Cap Bottle Touch-Up
404506 Beige Brush-In-Cap Bottle Touch-Up Paint
404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
880200 Electrical Terminal (assortment) Kit
Additional Parts Available
26 American Dryer Corp.
450134-7
Notes
450134-7 www.amdry.com
27
ADC Part No. 450134 7 - 12/27/05 - 0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project