2
XV6600WOC User Manual
XV6600WOC User Manual
Welcome
Congratulations on the purchase of a new Windows MobileTM-based XV6600WOC.
The integrated wireless voice and data capabilities mean that as well as keeping your
important PIM information up-to-date and close at hand, you can make calls, send and
receive e-mail, and look up valuable information from the Internet or your company’s
network anytime, anywhere. Also, with Microsoft ActiveSync the power of your
device is increased by allowing you to synchronize the information on your PC with your
device.
3
Regulatory
Notices
4
XV6600WOC User Manual
Before getting started
Before using and exploring your new WV6600WOC, some warning notes and regulatory
information are very important for you to go through.
THE DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE
BOX. (For information, see Chapter 1: Getting Started)
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS
CHARGING.
IN MANY COUNTRIES YOU ARE REQUIRED BY LAW TO TURN OFF
YOUR PHONE WHEN YOU FLY. TURNING OFF YOUR XV6600WOC
DOESN’T TURN OFF YOUR PHONE; YOU MUST TURN OFF YOUR
WIRELESS CONNECTION TO YOUR OPERATOR’S NETWORK.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER
WITH THE DEVICE’S OUTER CASING. (For more information, see
the enclosed warranty information)
XV6600WOC User Manual
When using this product, the safety precautions below must be taken against possible
legal issues and damages.
n ELECTRICAL SAFETY
This product is intended for use when supplied with power from the battery pack BTR6600
Other usage will invalidate any approval given to this product and may be dangerous.
n SAFETY IN AIRCRAFT
This product may cause interference to an aircraft's navigation system and its network.
In most countries, using this product on board an airplane is against the law.
n SAFETY FOR ENVIRONMENTS
Do not use this product in gas stations. Also the use of this product is prohibited in fuel
storehouse, chemicals, plants, and locations containing explosives.
n SAFETY ON THE ROAD
Vehicle drivers in motion are not permitted to use telephony services with the handheld
device, except in the case of emergency. In some countries, using hand-free devices as
an alternative is allowed.
n SAFETY FOR MEDICAL EQUIPMENT
This product may cause malfunctions of medical equipment. In most hospital or medical
centers, use of this product is forbidden.
n
NON-IONISING RADIATION
This product should be operated in the suggested normal condition only to ensure the
radiative performance and safety of the interference. As with other mobile radio transmitting
equipment, users are advised that for satisfactory operation of the equipment and for the
safety of personnel, it is recommended that no part of the human body be allowed to
come too close to the antenna during operation of the equipment.
Welcome
&
Regulatory
Safeguards
Notices
Important Safety Precautions
5
6
WV6600WOC User Manual
Contents
Important Health and Safety Information............5
Contents
Chapter 1
Getting Started
1.1 Knowing Your Device ............................10
1.2 Battery ..................................................12
1.3 Accessories............................................14
Chapter 2
2.1
2.2
2.3
2.4
2.5
2.6
Starting Up............................................18
Entering Information ............................24
Writing on the Screen ...........................28
Drawing on the Screen .........................30
Recording a Message ............................31
Finding Information ..............................32
Chapter 3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Knowing Your XV6600WOC
Using Your Phone
About Your Phone .................................34
Making a Call.........................................38
Receiving a Call.....................................41
In-Call Options......................................42
Contacts Information............................44
Additional Dialing Information .............46
Securing Your Phone.............................46
XV6600WOC User Manual
Chapter 4
Synchronizing Information
50
52
54
55
Personalizing Your WV6600WOC
5.1 Device Settings -------------------------- 58
5.2 Phone Settings -------------------------- 66
Chapter 6
6.1
6.2
6.3
6.4
Calendar --------------------------------Contacts ---------------------------------Tasks ------------------------------------Notes -------------------------------------
Chapter 7
7.1
7.2
7.3
7.4
Scheduling and Communicating Microsoft Pocket Outlook
70
72
75
77
Getting Connected
About Connections ---------------------Connecting to the Internet ------------Terminal Services Client ---------------Bluetooth---------------------------------
80
80
83
85
Contents
4.1 Using ActiveSync -----------------------4.2 Synchronizing Information ------------4.3 Synchronizing Using an Infrared
Connection ------------------------------4.4 ActiveSync Errors-----------------------Chapter 5
7
8
WV6600WOC User Manual
Contents
Chapter 8
8.1
8.2
8.3
8.4
E-mail Messages ................................ 100
Messaging ........................................... 104
MSN Messenger................................... 105
Managing Messages and Folders ........ 107
Chapter 9
9.1
9.2
9.3
9.4
9.5
Messaging Features
Companion Programs
Album ................................................. 110
Pocket Word........................................ 119
Pocket Excel ........................................ 122
Windows Media Player for Pocket PC . 124
Pictures ............................................... 125
Appendix : A
Maintaining Your
XV6600WOC..............................129
Appendix : B
Troubleshooting ........................ 152
Appendic : C
Index ....................................... 157
Chapter 1
Getting Started
1.1 Knowing Your Device
1.2 Battery
1.3 Accessories
Getting
Started
10
XV6600WOC User Manual
1.1 Knowing Your Device
Front , Top and Left Side Panel Components
Power Button/Backlight
MMC/SD cards or SDIO
accessories slot
Press to turn on/off your
XV6600WOC or Backlight.
Insert either MMC/SD cards or SDIO
accessories in this slot.
Earphone Microphone
Allows you to listen to audio
media or use the phone's
hands-free kit.
Contact
Press for quick access to your
Contacts.
Speaker
Listen to audio media or a
phone call from here.
Record
Calendar
Press to record a voice note.
Volume
Press up/down to adjust the
volume of your device.
Press for quick access
to your calendar.
16
Touch Screen
Windows Media
Pocket IE
Press to launch Windows
Media.
Press for quick access
to WEB and WAP sites.
Infrared Port
OK/Close
End
Enables you to exchange
file(s) or data with other
devices without cables/
wires.
Press to end a call.
Start
Navigation Pad
Press to display program
menu.
Send
Press to answer an incoming
call or to dial a number.
Messaging
Press for quick access to
email/MSN messages.
QWERTY Keyboard
Press to enter letter/
symbol.
Press to move up/down and
left/right through any of the
drop down menus or program
instructions; select by pressing
in the center. When in the
dialer screen:
Left - Press once to access
the Speed Dial feature.
Right- Press once to access
the Call History feature.
XV6600WOC User Manual
11
Back, Bottom and Right Side Panel Components
Car Antenna Connector
If available, you can attach your
phone to its antenna and utilize
its superior reception quality.
Stylus and Stylus Slot
Notification LED
Blue LED on the left :
For Bluetooth system notification
of powered-on and ready to
transmit RF signal.
Battery
Fixing Lock
Microphone
Speak here when receiving or
making a phone call or voice
recording.
Soft Reset
Press here with stylus to reset
your device.
Press to release the back
battery.
Sync Connector
Use this connector when
synchronizing / transmitting
data or recharging.
Getting
Started
Bi-color LED on the right :
For CDMA standby, message,
and network status, PDA
notification, PDA charging
status.
Getting
Started
12
XV6600WOC User Manual
1.2 Battery
Warning
: To reduce risk of fire or burns, do
not disassemble, crush, puncture, short external
contacts, heat above 60℃ (140℉), or dispose of
in fire or water. Replace only with manufacturer
specified batteries. Recycle or dispose of used
batteries according to the local regulations.
Your XV6600WOC contains a rechargeable Li-ion polymer
battery under the back cover. Battery power depends on
whether you are talking on the phone, using the PDA functions or if the device is on standby.
Battery life estimates :
n
Talk-time : 3 ~ 4 hrs,
n
PDA : 15 hrs (approx.),
n
Standby : 168 hrs (approx.),
n
Data retention time : 72 hrs.
The above times are based on using one function at a time.
Interchanging between functions will vary the battery life.
Data Retention
It is vital to keep your battery charged. Because your
XV6600WOC does not have a hard drive, all data and any
new programs you install are stored in RAM. If the battery
completely drains, any data or new programs you installed
will be erased. Only the default programs on the device when
you bought it will remain.
WARNING : VERIFY THAT THE BACKUP
BATTERY POWER REMAINS AT LEAST AT
50% OR ABOVE BEFORE YOU REMOVE THE
MAIN BATTERY. THIS CAN BE CHECKED BY
TAPPING
→ Settings → System tab →
Power.
F
To prevent this kind of data loss, a portion of the main battery
will keep your data safe for 72 hours if your device runs out of
power. An additional battery, the backup battery, is designed
to keep your data safe when you remove the main battery. It
will keep this data safe for 20 minutes.
XV6600WOC User Manual
13
To recharge your device
You can recharge your device in the following ways :
1
2
Place your XV6600WOC in the cradle and
connect the cradle to an external power
source with the AC Adapter. Before using your
XV6600WOC, charge the battery for at least 8
hours for the first time. Then, place it in the cradle
for a short time each day to recharge it to its full
capacity.
USB
synchronization
cable, connect to
your PC
Plug the AC
adapter into a
3
4
Plug the AC Adapter into the optional AC
Adapter Converter and then connect to the
sync connector of your XV6600WOC directly
to an external power source without using the
cradle.
If you have a spare battery for your XV6600WOC,
you can also put the battery into the slot in the
cradle for recharging.
To the sync
connector of your
XV6600WOC
To AC Adapter
Put a spare
unit into
the slot for
recharging
AC Adapter plugs
into the back of the
cradle
Getting
Started
Plug the AC Adapter into the optional USB
cable head and then connect your XV6600WOC
directly to an external power source.
To your
XV6600WOC.
Getting
Started
14
XV6600WOC User Manual
When Your Battery is Low
When the low battery-warning message appears, immediately save any data you are
working on, perform a synchronization with your PC, then turn off your XV6600WOC. If
your device does shut down, the backup portion of your main battery will protect the data
for about 72 hours.
To view the battery status:
Tap
→ Settings → System tab → Power.
ALWAYS ENSURE THAT THE BACKUP BATTERY REMAINS AT LEAST 50%
CHARGED.
1.3 Accessories
USB Cradle
Your XV6600WOC comes with a USB cradle. This allows you
to recharge your XV6600WOC with the AC Adapter, as well
as synchronize information between your XV6600WOC and
a PC using ActiveSync.
To synchronize, the USB Cradle must be plugged
into an available USB port on your PC.
For battery recharging, you must plug the AC
Adapter into the back of the cradle.
AC Adapter plugs into
the back of the cradle for
battery recharging
XV6600WOC User Manual
15
AC Adapter Converter
AC Adapter converter in combination with the AC Adapter allows you to recharge your
device without the cradle.
USB Sync Cable
The USB cable (user's optional item) allows you to synchronize with your desktop without
the cradle. The AC converter in the head also allows you, in combination with an AC
Adapter, to recharge your device.
Stereo Headset
Getting
Started
The stereo headset has a volume control jog dial
and a button to press to pick up a phone call.
Getting
Started
16
XV6600WOC User Manual
Chapter 2
Knowing Your XV6600WOC
2.1 Starting Up
2.2 Entering Information
2.3 Writing on the Screen
2.4 Drawing on the Screen
2.5 Recording a Message
2.6 Finding Information
Knowing your
XV6600WOC
18
XV6600WOC User Manual
2.1 Starting Up
Screen Tapping, Calibration and
Re-calibration
When you first start up your XV6600WOC, you will be asked to
calibrate the screen by tapping the center of a cross with your
stylus as it moves around the screen. This process ensures
that when you tap the screen with your stylus the item tapped
is activated.
To re-calibrate the screen :
If your device does not accurately respond to screen taps, you
will need to re-calibrate it.
→ Settings → System tab → Screen.
1
Tap
2
Tap the Align Screen button on the General tab
to re-calibrate the screen as described above.
When aligning the touch screen, tap the target
firmly and accurately.
Screen Orientation
To switch the orientation of your LCD screen between Portrait
and Landscape mode if needed, you can select the Orientation options by tapping
→ Settings → System tab →
Screen. This helps to get a better view or a better operation
interface when running certain programs on your XV6600WOC.
Long blocks of text may be easier to read using Landscape
orientation.
For easier reading of text in programs that support ClearType,
tap the ClearType tab, and then select Enable ClearType.
To increase readability or see more content by adjusting the
size of text in programs that support it, tap the Text Size tab,
and then use the slider to make text larger or smaller.
F
XV6600WOC User Manual
19
Today Screen
The Today screen displays important information, such as
today’s appointments and status icons for your device. Tap
the information listed on the Today screen to open the associated program.
1
1
Tap to go to a program.
6
2
Tap to view notification information.
7
3
Tap to view network status and options.
4
Tap to change volume or mute all sounds.
5
Tap and hold to change time format.
6
Tap to change date and time.
7
Tap to change owner information.
8
Your day at a glance. Tap to open the associated
program.
9
Tap to create a new item.
To go back to the Today screen when you are
using other programs, just tap
→ Today.
To customize the Today screen display, including
the background image, tap
→ Settings →
Personal tab → Today (For more information,
please see Chapter 5).
3
4
5
8
9
10
to
Knowing your
XV6600WOC
10 Tap
to disconnect ActiveSync or tap
turn on/off Bluetooth.
2
Knowing your
XV6600WOC
20
XV6600WOC User Manual
Indicators
Following are some of the status icons you may see.
Indicators
/
/
/
Meaning
Turns sounds on / off.
Main battery with full strength / No battery.
Main battery low / very low.
Backup battery is very low.
Indicates that the Caller ID monitor program is not yet ready to receive calls.
Connection is active.
Indicates that you are roaming in a different network area.
Notification that one or more instant messages were received.
Notification that one or more mobile e-mail / SMS messages were received.
/
Indicates the connection to your mobile phone service provider is on / off, and
the strength of the signal.
If more notification icons need to be displayed and there is no room to display
them, this indicator will display. Tap the icon to view all notification icons.
Notifications
Your device reminds you in a variety of ways when you have something to do or receive
a SMS. For example, if you’ve set up an appointment in Calendar, a task with a due date
in Tasks, or an alarm in Clock, you will be notified in any of the following ways:
n
A message box appears on the screen.
n
A sound, which you can specify, is played.
n
A light flashes on your device.
n
The device vibrates.
XV6600WOC User Manual
21
To choose reminder types and sounds for your
device, tap
→ Settings → Personal → Sounds
& Notifications. The options you choose here apply
throughout the device.
Title Bar
In Portrait mode :
The Title bar, located at the top of
the screen, displays the current time,
and certain status icons. Tap the leftmost icon to open the Start Menu.
In Landscape mode :
2
1
1
Tap to switch to a
program.
2
Tap to switch to a
program that you
recently used.
3
3
Tap to see more
programs.
5
4
Tap to change device
settings.
5
Tap to see a Help topic
for the current screen.
1
3
2
4
5
4
Use the command bar at the bottom of the screen to perform
tasks in programs. The command bar includes menu names,
buttons, and the Input Panel button.
1
To create a new item in the current program, tap
New.
2
Tap to select menu commands.
3
Tap to select button commands.
4
Tap to display the input panel.
To see the name of a button, tap and hold the
stylus on the button.
Drag the stylus off the button so that the command
is not carried out.
Knowing your
XV6600WOC
Command Bar
1
2
3
F
4
Knowing your
XV6600WOC
22
XV6600WOC User Manual
Pop-Up Menus
Use pop-up menus to quickly perform an action on an item. To access a pop-up menu,
tap and hold the item that you want to perform the action on. When the menu appears,
tap the action you want to perform, or tap anywhere outside the menu to close it without
performing an action.
1
Tap and hold to display the pop-up menu.
2
Lift the stylus and tap the action you want.
3
Tap outside the menu to close it without performing an action.
Programs
You can switch from one program to another by selecting it from the
To access some programs, tap
menu.
→ Programs, then the program name.
You can also switch to some programs by pressing a program button on your device. For
more information about the Button settings, please see Chapter 5.
The following table contains a partial list of programs on your device. Look on the
XV6600WOC Companion CD for additional programs that you can install onto your
device.
Icon
Program
Description
ActiveSync
Synchronizes information between your device and PC.
Calendar
Keeps track of your appointments and creates meeting requests.
Contacts
Keeps track of your friends and colleagues.
Messaging
Sends and receives e-mail/ Text messages.
Pocket IE
Pocket Internet Explorer browses Web and WAP sites, and
downloads new programs and files from the Internet.
Notes
Creates handwritten or typed notes, drawings, and recordings.
Phone
Makes and receives calls, switches between calls, and sets up
conference calling.
Tasks
Keeps track of your tasks.
XV6600WOC User Manual
Icon
Program
23
Description
Enables the multimedia function on your XV6600WOC.
Pocket Excel
Create new workbooks or view and edit Excel workbooks.
Pocket Word
Create new documents or view and edit MS-Word documents.
MSN Messenger
Sends and receives instant messages with your MSN Messenger
contacts.
Pictures
Collects, organizes and sorts .jpg picture files on your
XV6600WOC or on a storage card.
Calculator
Performs basic arithmetic, such as addition, subtraction, multiplication, and division.
Games
By default, there are two games, Jawbreaker and Solitaire,
included in this folder.
File Explorer
Views all the files on your XV6600WOC.
Album
Collects, organizes and sorts .JPG/.BMP/.GIF picture files on
your XV6600WOC.
xBackup
Backs up your XV6600WOC files to ROM or an SD card.
Program for each button can be reprogrammed.
Knowing your
XV6600WOC
Windows Media
Knowing your
XV6600WOC
24
XV6600WOC User Manual
2.2 Entering Information
You can enter information on your device in several ways,
depending on the type of device you have and the program
you are using.
n
Synchronizing - Using ActiveSync, exchange information between your PC and device. (For more information on ActiveSync, see Chapter 4.)
n
Typing - Using the Input Panel or the QWERTY keyboard on the bottom of your device, enter typed text
into the device. You can do this by tapping keys on the
on screen soft keyboard, by pressing the QWERTY
keyboard, or by using the handwriting recognition software.
n
Writing - Using the stylus, write directly on the screen.
n
Drawing - Using the stylus, draw directly on the
screen.
n
Recording - Create a stand-alone recording or embed
a recording into a document or note.
Using the Input Panel
Use the input panel to enter information in any program on
your device. You can either type using the QWERTY Keyboard, soft Keyboard or write using Letter Recognizer,
Block Recognizer, or Transcriber. In either case, the
characters appear as typed text on the screen.
Typing on the QWERTY Keyboard
1
Slide the main screen upward to reveal the
QWERTY keyboard.
2
To type lowercase letters, press the keys with
fingers.
3
To type a single uppercase letter or symbol,
press the
key.
4
To type capital letters, press
release it press
→
again.
→
, to
5
To type a number or symbol, press
key.
Press
twice to type a serial of numbers
symbols.
Tap to change
input panel
options.
Tap to select an
input panel.
Tap to open the selected
input panel.
£
£
Tap to see the
lists of input
panels.
XV6600WOC User Manual
25
To type with the soft keyboard
To show or hide the input panel, tap the Input Panel button
. To see your choices, tap the arrow next to the Input
Panel button.
Tap the arrow next to the Input Panel button
and then Keyboard.
2
To type lowercase letters, tap the keys with the
stylus.
3
To type a single uppercase letter or symbol, tap
the Shift key. To tap multiple uppercase letters
or symbols, tap the CAP key. You can also tap
and hold the stylus on the key and drag up to
type a single uppercase letter.
4
To add a space besides, tapping the space bar,
you can also tap and hold any key and then
drag the stylus to the right across at least two
others.
5
To backspace one character besides, tapping the
backspace key, you can also tap and hold any
key and then drag the stylus to the left across
at least two others.
6
To insert a carriage return, tap and hold the stylus
anywhere on the keyboard and drag down.
When you use the input panel, your device anticipates the
word you are typing or writing and displays it above the input
panel. When you tap the displayed word, it is automatically
inserted into your text at the insertion point. The more you use
your device, the more words it learns to anticipate.
To change word suggestion options, such as the
number of words suggested at one time,
tap
→ Settings → Personal tab → Input →
Word Completion tab.
For more information about Input settings, please see
Chapter 5.
Knowing your
XV6600WOC
1
Tap to add the word if this
is the right one for you.
Knowing your
XV6600WOC
26
XV6600WOC User Manual
Using Letter Recognizer
With Letter Recognizer you can write letters using the stylus
just as you would on paper.
1
Tap the arrow next to the Input Panel button
and then Letter Recognizer.
2
Write a letter in the box.
When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using Letter
Recognizer, with Letter Recognizer open, tap the question
mark
next to the writing area.
F
Using Block Recognizer
With Block Recognizer you can input character strokes using
the stylus that are similar to those used on other devices.
1
Tap the arrow next to the Input Panel button
and then Block Recognizer.
2
Write a letter in the box.
When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using Block
Recognizer, with Block Recognizer open, tap the question
mark
next to the writing area.
Switching to Transcriber
With Transcriber you can write anywhere on the screen using
the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or
more of information. Then, pause and let Transcriber change
the written characters to typed characters.
1
Tap the arrow next to the Input Panel button
and then Transcriber.
2
Write anywhere on the screen.
F
For specific instructions on using Transcriber, with Transcriber open, tap the question mark in the lower right hand
corner of the screen.
XV6600WOC User Manual
27
To punctuate in Transcriber :
1
Tap the keyboard button
2
Tap the desired punctuation.
3
Tap OK to hide the keyboard.
on the tool bar.
To learn writing in Transcriber :
1
Tap button
2
A Letter Shapes Selector screen appears :
on the tool bar.
n At the bottom of the screen, select the
character you wish to explore.
n At the top of the screen, tap the picture of
this character. It slowly redraws, showing the
writing sequence.
n Select how often you write the character
using that method.
Using Profiles
Letter Shape Selector supports two profiles by tapping File
→ Master or Guest :
n
n
Master : Typically used by the XV6600WOC's primary
user. This profile is unaffected by any Guest user settings.
Guest : For temporary device usage by another person.
Editing/Selecting Text
Each input program provides cursor keys to move through text
and backspace so that you can correct spelling, grammar or
insert additional information. Alternatively, you can use your
stylus to make an insert icon.
To select typed text, drag the stylus across the text you want
to select. You can cut, copy, and paste text by tapping and
holding the selected words, and then tapping an editing command on the pop-up menu, or by tapping the command on
the Edit menu.
Knowing your
XV6600WOC
When you finish the selection through all the
letters, you can save as a profile by tapping File
→ Save → and enter a name for the profile.
F
Knowing your
XV6600WOC
28
XV6600WOC User Manual
2.3 Writing on the Screen
In any program that accepts writing, such as the Notes program,
and in the Notes tab in Calendar, Contacts, and Tasks, you
can use your stylus to write directly on the screen. Write the way
you do on paper. You can edit and format what you have written
and convert the information to text at a later time.
Tap the Pen button
to switch to writing mode. This
action displays lines on the screen to help you write.
Some programs that accept writing may not have the
Pen button. See the documentation for that program
to find out how to switch to writing mode.
Selecting Writing
If you want to edit or format writing, you must select it first.
1
Tap the
button again to exit writing mode. This
helps to select the writing text more easily.
2
Tap and hold the stylus next to the text you want
to select until the insertion point appears.
3
Without lifting, drag the stylus across the text you
want to select.
If you accidentally write on the screen, tap Edit, then Undo
and try again.
You can cut, copy, and paste written text in the same way
you work with typed text: tap and hold the selected words and
then tap an editing command on the pop up menu, or tap the
command on the Edit menu.
Tap the Pen button and
use your stylus like a pen.
XV6600WOC User Manual
29
Converting writing to text
1
On the writing note, tap Tools and Recognize
from the menu bar.
2
If you want to convert only certain words, select
them before tapping Recognize on the Tools
menu (or tap and hold the selected words and
then tap Recognize on the pop up menu).
If a word is not recognized, it will be left as writing. And if the
conversion is incorrect, you can select different words from a
list of alternates or return to the original writing.
Tap and hold the incorrect word (tap one word at a
time), then tap Alternates from the pop up menu. A
menu with a list of alternate words appears. Tap the
word you want to use, or tap the writing at the top of
the menu to return to the original writing.
The writing is
turned into text.
To get good recognition :
Write on the lines and draw descanters below the
line. Write the cross of the “t” and apostrophes
below the top line so that they are not confused
with the word above. Write periods and commas
above the bottom line.
For better recognition, use a zoom level of 150%
or higher by tapping Tools → Zoom to change
the zoom level.
Write the letters of a word closely and leave
big gaps between words so that the device can
easily tell where words begin and end.
Hyphenated words, foreign words that use
special characters such as accents, and some
punctuation cannot be converted.
If you edit or add to a word after attempting to recognize it,
the new writing will not be included if you attempt to recognized it again.
Knowing your
XV6600WOC
Write neatly.
Knowing your
XV6600WOC
30
XV6600WOC User Manual
2.4 Drawing on the Screen
You can draw on the screen in the same way that you write
on the screen. The difference between writing and drawing
on the screen is how you select items and how they can be
edited. For example, selected drawings can be re-sized,
while writing cannot.
To create a drawing :
Cross three ruled lines on your first stroke. A drawing
box appears. Subsequent strokes in or touching the
drawing box become part of the drawing. Drawings
that do not cross three ruled lines will be treated as
writing.
The drawing box indicates
the boundaries of the drawing.
To select a drawing :
If you want to edit or format a drawing, you must select it
first.
1
Tap and hold the stylus on the drawing until the
selection handle appears. To select multiple
drawings, deselect the pen button and then
drag to select the drawings you want.
2
You can cut, copy, and paste selected drawings
by tapping and holding the selected drawing and
then tapping an editing command on the pop
up menu, or by tapping the command on the
Edit menu. To re-size a drawing, make sure the
Pen button is not selected, and drag a selection
handle.
To change the zoom level so it is easier to work
or view your drawing, tap Tools and then select
a zoom level.
Pen button
XV6600WOC User Manual
31
2.5 Recording a Message
In any program where you can write or draw on the screen,
you can also quickly capture thoughts, reminders, and phone
numbers by recording a message. In Calendar, Tasks, and
Contacts, you can include a recording in the Notes tab.
In the Notes program, you can either create a stand-alone
recording or include a recording in a written note. If you want
to include the recording in a note, open the note first. In the
Inbox program, you can also add a recording to an e-mail
message.
To create a recording
To add a recording to a note, open the note before
recording. Tap
→ Notes
2
If you do not see the Record/Playback toolbar,
tap
.
3
Hold your device’s microphone near your mouth
or other source of sound.
4
To start recording, tap
5
To stop recording, tap
. Two beeps will sound.
The new recording appears in the note list or as
an embedded icon.
6
To play a recording, tap in the open note or tap
the recording in the note list.
. A beep will sound.
You can also invoke the Record/Playback toolbar
by pressing the Record button, the first button from
the top on the left side of your XV6600WOC.
To quickly create a recording, hold down the
Record button. When you hear the beep, begin
your recording. Release the button when you are
finished. The new recording is stored in the open
note or as a stand-alone recording if no note is
open.
Tap to show or hide
the Recording tool bar
Tap to begin recording
Knowing your
XV6600WOC
1
Indicates an embedded
recording.
Knowing your
XV6600WOC
32
XV6600WOC User Manual
Change recording formats
1
Mobile Voice is a 2.4 KB audio coded (compressor
decompressor). It is the recommended format
because it provides good voice recording and
takes far less storage space than PCM.
2
Pulse Code Modulation (PCM) provides slightly
better sound quality. However, PCM recordings
may take up to 50 times more storage space
than Mobile Voice recordings. PCM cannot be
used to create recordings that are embedded in
notes.
2.6 Finding Information
The Find feature on your XV6600WOC helps you quickly
locate the information you need.
1
Tap
2
In Find, enter the file name, word, or other
information you want to search for. If you have
looked for this item before, tap the Find arrow
and select the item from the list.
3
To help narrow your search, select a data type
under Type.
4
Tap Go. The My Documents folder and subfolders are searched.
5
In the Results list, tap the item you want to
open.
→ Programs → Find.
To quickly find information that is taking up storage
space on your device, select Larger than 64 KB
in Type.
F
In the note list, tap Tools → Options → Global Input Options
link (at the bottom of the page).
Chapter 3
Using Your Phone
3.1 About Your Phone
3.2 Making a Call
3.3 Receiving a Call
3.4 In-call Options
3.5 Contacts Information
3.6 Additional Dialing Information
3.7 Securing Your Phone
Using Your
Phone
34
XV6600WOC User Manual
3.1 About Your Phone
Like a standard mobile phone you can use your XV6600WOC
to keep track of calls and send SMS messages. You can
also take notes while talking and dial directly from Microsoft
Contacts.
About The Dialer Screen
To access the Dialer Screen, tap
, then Phone, or press
on your device. From this screen, you can access Call History, Speed Dial and Phone Setting. Signal status information
and important icons that tell you about your call include :
1
1
The icon indicates the strength of the signal.
2
Last number details are displayed here.
3
Keypad for inputting.
4
Task bar to access phone setting.
5
Tap to make a call.
5
6
Stores numbers you call often.
6
7
View all call history, including received, dialed
and missed calls.
2
3
7
8
8 Tap to end a call.
4
XV6600WOC User Manual
35
Indicators
Below are some of the status icons you may see.
Indicator
Meaning
Phone off or out of network service. Tap this
icon to turn on the phone
In network service, tap this icon to turn off
the phone.
Call Missed. Tap this icon to view the call(s)
you missed.
Unread E-mail or SMS. Tap the icon to view
unread SMS or E-mail.
Connecting in progress. The icon will disappear when you are connected to your
ISP.
Shows voice privacy is not available.
Roaming allows you to use the phone
anywhere in the world using local phone
number.
Enables the network to detect your position.
Indicates your connection is at full strength.
Using Your
Phone
Using Your
Phone
36
XV6600WOC User Manual
The Navigation Pad and Dialing
1
Take Call - Press to take an incoming call.
Dialer Screen -Press to activate the dialer
screen.
2
1
3
Speakerphone - During a call, press and hold
to turn the speakerphone on or off.
Dial - Press to dial a number.
2
Scroll Up - Press to scroll up through a list.
3
End Call - Press to end a call.
4
Call History - After launching the dialer screen,
press to enter the Call History feature.
5
Scroll Down - Press to scroll down through a
list.
6
Center - Press to select a menu item.
7
Speed Dial - After launching the dialer screen,
press to enter the Speed Dial feature.
Checking Your Connection
The default settings for your device are programmed to
assume that you want to use your phone. Your device will
automatically connect your mobile phone to your service
provider’s network.
The icon
indicates that you are connected to your service
provider's network. A full strength signal is indicated by
.
As the strength of the signal diminishes, so will the number of
vertical bars in the icon, with no bars indicating no signal.
4
7
5
6
XV6600WOC User Manual
37
IN MANY COUNTRIES YOU ARE REQUIRED
BY LAW TO TURN OFF YOUR PHONE WHEN
YOU FLY. TURNING OFF YOUR XV6600WOC
DOESN'T TURN OFF YOUR PHONE; YOU MUST
TURN OFF YOUR WIRELESS CONNECTION
TO YOUR OPERATOR’S NETWORK.
Turning The Phone On and Off
You can turn your phone on and off while keeping your actual
device turned on.
1
While using any program on your device, tap
in the title bar at the top of the phone’s display.
2
Tap the Turn on flight mode or Turn off flight
mode option in the pop-up menu.
3
To receive calls when your device is turned off,
leave the Phone turned on.
You can use other programs on your device during
a call. To quickly switch back to Phone, tap
,
or tap
→ Phone.
Using Your
Phone
Using Your
Phone
38
XV6600WOC User Manual
Adjusting The Phone Volume
1
During a call, tap
or press the volume on
the side of your device.
2
You can select to adjust the phone volume
(ring) or device volume
(notification levels
and MP3) on the pop-up menu.
3
If you select Vibrate mode,
will appear in
the title bar at the top of the phone display.
4
Turn off the volume by choosing the Off
option.
To adjust the conversation phone volume, you
must do it during a call. Adjusting the volume at
another time will affect the ring, notification and
MP3 levels.
3.2 Making a Call
With your XV6600WOC, you can make a call from the Dialer,
Contacts, Speed Dial, and Call History.
To make a call from the Dialer :
The most direct method is by using the Phone keypad.
1
Press
2
Tap the number on the keypad then tap
or press
button.
to bring up the dialer screen.
Backspacing and Deleting
If you tap a wrong number, you can tap the backspace
arrow key to erase individual numbers one at a
time.
XV6600WOC User Manual
39
You can also delete all the numbers in the window by
tapping Edit and then Clear.
To make a call from Contacts :
You can make a call from Contacts in the following ways :
Option 1
Press the Microsoft Contacts Button, find the contact
and then tap
twice -- once to send to the dialer
screen, and once to call.
The pop up menu and
button will by default
display Call Work Tel. However, you can
customize it so that the mobile number or e-mail
is displayed instead. See Option 3 below for
specific details.
Option 2
Select a contact in the contacts list and then press
left or right on the navigation pad to select a phone
number. Press
to call.
Option 3
Tap the w here to pop-up all the phoned
numbers and e-mail for this contact
G
Using Your
Phone
In the contacts list, tap the w in the right column next
to the contact you want to customize. A pop-up menu
will display the phone numbers and e-mail addresses
for this contact. Tap desired phone number to call.
Using Your
Phone
40
XV6600WOC User Manual
To make a call from Speed Dial :
Create speed dials to call frequently-used numbers with a single tap. Before you can create
a speed dial entry for a phone number, that number must already exist in Contacts.
1
From the Phone keypad, tap
2
Tap the desired contact name and number.
3
In the Location field, tap the Up/Down arrows to select an available location
to assign as the new speed dial entry. The first speed dial location is reserved
for your voice mail.
→ New.
By memorizing the position in the Speed Dial list of a number, you can dial the number
by entering its position number.
For example:
Alex Liang is at position 3. To dial his number simply tap and hold 3 on the dialer keypad;
if the number holds a position of 10 or more, tap the first number, and then tap and hold
the second to dial.
By default the Location function will give you the next available position in
the Speed Dial list. If you want to put a number in a position that is already
occupied, the new number will replace the number already there.
Tips for Speed Dial Setting
To create a speed dial entry from Contacts, tap and hold the contact name, tap
Add to Speed Dial, and then tap the Up/Down arrows to select an available
location to assign as the new speed dial entry.
To delete a speed dial entry, go to the Speed Dial list, tap and hold the contact
name in the box to the right of the assigned speed dial number, and then tap
Delete.
XV6600WOC User Manual
41
To make a call from the Call History :
1
Go to Phone and press the right side of the
navigation pad or tap
2
Find the call details by first selecting the category
it is filed under. Tap on All Calls on the top left
corner, a pop-up menu will appear. You can then
select All Calls, Missed, Outgoing, Incoming and
By Caller...For example, if it is in All Calls, select
All Calls from the drop down menu in the top-left
corner.
3
Use the navigation pad to find the number and then
press
or the icon to the left of the number you
wish to call.
4
Call History icons include :
→ incoming calls ;
→ missed calls.
→ outgoing calls;
3.3 Receiving a Call
To answer an incoming call :
1
Tap Answer, or press
2
Tap Ignore or press
on your device.
to reject the call.
Using Your
Phone
If you reject a call, the busy tone will be sent out.
To end a call :
When on a call, you can press
end the call.
or tap
to
Using Your
Phone
42
XV6600WOC User Manual
3.4 In-Call Options
Your device notifies you when you have another incoming call
and gives you the choice of rejecting or accepting the call. If
you accept, you can choose to switch between the two callers or set up a conference call between all three parties. A
conference call can include up to six people.
Putting a call on hold
1
Tap Answer to the take the 2nd call and put the
1st on hold.
2
To end the 2nd call and go back to the 1st, tap
or press
.
To swap between calls :
You can choose to swap backwards and forwards
between 2 callers by tapping
or the
.
To set up conference calls :
1
Dial a number, when it is picked up, dial a 2nd
number and wait for it to be picked up.
2
When it is picked up, press
set up the conference.
or
to
If the conference connection is successful, In
Call will appear at the top of the phone dialer
screen ( See right).
You must dial out to set up conference calling
period.
XV6600WOC User Manual
43
Making a Note
Regardless of whether you call from the Dialer, Contacts,
Call Log, or Speed Dial, you can take notes during a call. After
you have finished the note, it will be saved as an attachment
to your call in one of the Call Log folders.
a. To make a note :
1
After you have entered a number and tapped
or
, tap the
of the screen.
2
icon at the bottom
Use any of the input methods to record your note
and then tap OK. You can finish your note during
or after the call.
b. To view a note :
1
Press the right side of the navigation pad or tap
, tap and hold the call, and then from
the pop-up menu, tap View Note. (The icon
indicates a note).
2
F
Using Your
Phone
Or, go to Notes of the file from the list. (For
more information, see Chapter 2 Entering
Information.)
Tap here to view the notes
Using Your
Phone
44
XV6600WOC User Manual
Enabling the Speakerphone Mode
Your device has a speakerphone allowing you to talk handsfree and/or let other people listen to the caller.
1
Wait until the phone is ringing.
2
Press and hold
until the speakerphone
comes on and the icon
toolbar.
3
appears in the top
To turn off the speakerphone, press and hold
again.
DO NOT LEAVE THE PHONE IN SPEAKERPHONE MODE AND HOLD IT TO YOUR EAR;
THE SOUND MAY DAMAGE YOUR EAR.
Checking Your Voice Mail
The first speed dial location defaults as your voice mailbox. It
will automatically detect and set as default the voice mailbox
number of your mobile service provider.
To retrieve your voice mail :
On the Phone screen, tap
side of the navigation pad, select
and then press
.
or press the left
Voice Mail
3.5 Contacts Information
Contacts can be imported by:
1
Call History - New contact numbers can be
found in incoming or missed calls.
Creating Contacts in Microsoft Contacts
creates more detailed records.
XV6600WOC User Manual
45
Call History
Tap
on the phone screen to view the call history list:
To add an entry to Contacts from Call History :
1
Find the call details you want to add.
2
Tap an entry and hold with the stylus or press and hold the navigation pad
center; select Save to Contacts in the pop-up menu that appears .
3
In the Save to Contacts screen, add additional contact details and press
the Action button.
The call details in the Call History will then be amended and displayed under the name
of the contact, not their telephone number.
Manage Your Call History
Call History details all incoming, outgoing, and missed calls, and also provides a summary of total calls. Call History can also tell you when a call was initiated, how long it
lasted, and provides easy access to any notes taken during the call.
a. Viewing calls details
Tap in the top left corner of the screen and then select a category from the drop down
menu.
Calls are categorized as follows:
All Calls - displays all calls made to and from the phone in chronological order.
n
Missed
n
Outgoing
- displays calls made from the phone.
n
Incoming
- displays calls made to the phone.
n
By Caller - list calls alphabetically according to caller.
- displays calls that were answered.
Using Your
Phone
n
Using Your
Phone
46
XV6600WOC User Manual
b. To view duration of calls :
Go to Call History, find the call you are looking for, then tap it once.
c. To delete individual calls from Call History :
Tap and hold the stylus on the call to be deleted, then select Delete from the
pop up menu.
d. To delete all calls from Call History :
Tap Tools → Delete all Calls.
e. To set limits on the size of your Call History :
1
Tap
2
For deleted history items older than between down menu and select a time
in the drop down menu select a time period then tap OK.
→ Call Timers.
3.6 Additional Dialing Information
To make an emergency call :
Enter the emergency number 911 then tap
or press
button.
3.7 Securing Your Phone
You can customize the level of security you want to have on your XV6600WOC by locking
the keypad, or the entire device.
Locking the keypad
The keypad lock turns off the keypad functionality. This is a helpful feature if, for example,
your XV6600WOC is turned off and in your pocket, and you want to prevent accidental
key presses from pressing a button etc .
1
Tap
2
Select Lock all buttons except Power button.
3
To unlock your keypad, tap Do not lock buttons.
→ Settings → System tab → Button Lock
XV6600WOC User Manual
47
Locking your phone
Locking your XV6600WOC prevents access to personal data.
When you enable this feature, your XV6600WOC will automatically lock after a specified time of inactivity. A screen will
be displayed requiring your XV6600WOC lock password before
access is granted.
1
Tap
2
Select the type of password you would like
to use : Simple 4 digit password or Strong
alphanumeric password.
→ Settings → Personal → Password.
A strong password must have at least 7 characters
that are a combination of uppercase and lowercase
letters, numerals, and punctuation.
3
Enter the password and, if necessary, confirm the
password.
4
Select how long your mobile device must be turned
off before the password is required for using the
device by tapping Prompt if device unused for.
Using Your
Phone
Using Your
Phone
48
XV6600WOC User Manual
Chapter 4
Synchronizing Information
4.1 Using ActiveSync
4.2 Synchronizing Information
4.3 Synchronizing by Using
an Infrared Connection
4.4 ActiveSync Errors
Synchronizing
Information
50
XV6600WOC User Manual
4.1 Using ActiveSync
Using Microsoft  ActiveSync you can synchronize the information on your PC with the
information on your XV6600WOC. Synchronization compares the data on your device with
your PC and updates both with the most recent information. With ActiveSync, you can:
n Keep Pocket Outlook data up-to-date by synchronizing your device with Microsoft
Outlook data on your PC.
n Choose to synchronize Inbox, Calendar, and Contacts with a server so that you have
the latest information, even when your computer is turned off.
n Copy (rather than synchronize) files between your device and your PC.
n Control when synchronization occurs by selecting a synchronization mode.
n Select which information types are synchronized and control how much data is synchronized.
By default, ActiveSync does not automatically synchronize all types of
information. Use ActiveSync options to turn synchronization on and off for
specific information types.
Using Server ActiveSync, you can synchronize information directly with a
Microsoft Exchange Server if your company is running Microsoft® Mobile
Information Server 2002 or later.
Installing ActiveSync
Before you begin synchronization, install ActiveSync on your computer from the
XV6600WOC 2003 Companion CD. ActiveSync is already installed on your
XV6600WOC.
Creating a Partnership
After the installation is complete, the New Partnership Wizard helps you set up a partnership between your phone and your computer and/or a server so that you can start
synchronizing information and customizing your synchronization settings.
XV6600WOC User Manual
51
In the New Partnership Wizard select Synchronize with this
desk-top computer. Unless you are certain that your company
is running Microsoft® Mobile Information Server 2002 or later
and you know the server name, then choose Synchronize with
Microsoft® Mobile Information Server and/or this compute.
For more information, contact your network administrator or
service provider.
View connection status.
Your first synchronization will automatically begin when you finish using the wizard. After the first synchronization, you will
notice that your Outlook information now
appears on your XV6600WOC.
Tap to connect and
synchronize
Tap to stop
synchronization
View synchronization
status.
Tap to synchronize via IR or change
synchronization settings.
Synchronizing
Information
Synchronizing
Information
52
XV6600WOC User Manual
4.2 Synchronizing Information
This section provides an overview of the types of Outlook information you can synchronize. By default, ActiveSync does not automatically synchronize all types of Outlook
information. Use ActiveSync options to turn synchronization on and off for specific
information types.
Synchronizing Inbox
When you select Inbox for synchronization in ActiveSync, e-mail messages are synchronized as part of the general synchronization process. During synchronization, the
following events occur :
n
Messages are copied from the Outlook Inbox folder on your computer, or from a
Microsoft Exchange Server, to the Inbox folder on your XV6600WOC.
n
By default, when synchronizing Inbox information with your computer, you will receive
only messages from the last three days and the first 500 bytes of each new message.
You can also choose to download file attachments.
n
The messages on your phone and on your computer are linked. When you delete a
message on your phone, it is deleted from your computer the next time you synchronize,
and vice versa.
n
Messages in subfolders in other e-mail folders in Outlook are synchronized only if the
folders have been selected for synchronization in the Inbox on your XV6600WOC.
Messages are not received in your Inbox through synchronization. Instead,
they are sent to your phone by way of your service provider. For more details,
please see Message Features in Chapter 8.
Synchronizing Calendar
n
Calendar items stored on your XV6600WOC can be synchronized with calendar items
stored on your PC and/or on a Microsoft Exchange Server. By default, calendar items
from the last two weeks will be synchronized.
n
Calendar items created on your XV6600WOC are copied to your PC and/or server
during synchronization, and vice versa.
XV6600WOC User Manual
53
Synchronizing Contacts
n
Contacts stored on your phone can be synchronized with contacts stored on your
computer or on a Microsoft Exchange Server. By default, all of your contacts will
be synchronized.
n
Contacts created on your phone are copied to your computer and/or server during
synchronization, and vice versa.
Synchronizing Tasks
n
Tasks stored on your phone can be synchronized with tasks stored on your computer.
Task synchronization is automatically selected in ActiveSync. By default, all of your
incomplete tasks will be synchronized.
n
Tasks created on your phone are copied to your computer during synchronization,
and vice versa.
Tasks can be synchronized only with your computer. They cannot be
synchronized with a server.
Synchronizing
Information
Synchronizing
Information
54
XV6600WOC User Manual
4.3 Synchronizing Using an Infrared Connection
You can use an infrared connection to create a direct connection between your phone
and another mobile device or computer quickly. This method is ideal for quickly switching
between multiple devices since there are no cables or adapters to change. When creating
a partnership, you must connect using infrared, a cable, or a cradle connection.
For more information about synchronizing using an infrared connection or other connection
types, see ActiveSync Help on your computer.
Transferring Items Using Infrared
Using infrared (IR), you can also send and receive information, such as contacts and
appointments, between two devices.
a. To send information :
1
Switch to the program where you created the item you want to send and
locate the item in the list.
2
Align the IR ports so that they are unobstructed and within close range.
3
Tap and hold the item, then tap Beam Item on the pop up menu.
You can send items, but not folders, from File Explorer. Tap and hold the item
you want to send, and then tap Beam File on the pop up menu.
b. To receive information :
1
Align the IR ports so that they are unobstructed and within close range.
2
Have the owner of the other device send the information to you. Your device
will automatically receive it.
XV6600WOC User Manual
55
4.4 ActiveSync Errors
Whenever ActiveSync cannot successfully synchronize your information, it displays an
error on your phone.
To view ActiveSync error information
Press the Action button when the error text is displayed. ActiveSync will then
display more information about the error that occurred.
Some types of errors can interfere with automatic synchronization. If you suspect
that a scheduled automatic synchronization has not occurred, you should attempt
to manually synchronize your information. Successfully completing manual
synchronization will reset automatic synchronization. For more information,
see the Synchronizing Information section of ActiveSync Help on your
computer.
Synchronizing
Information
Synchronizing
Information
56
XV6600WOC User Manual
Chapter 5
Personalizing Your
XV6600WOC
5.1 Device Settings
5.2 Phone Settings
Personalizing
58
XV6600WOC User Manual
5.1 Device Settings
You can adjust device settings to suit the way you work. To see available options, tap
→ Settings → Personal or System tab located at the bottom of the screen.
Personal Tab
Icon
Program
Button
Assigns an application program to a hardware button.
Input
Sets up the input portion of your device.
Menus
Customizes the menu appearance and enables a pop up menu from the
New button.
Owner Information
Displays your contact information.
Password
Limits access to your device.
Phone
Sets up the phone function of your wireless feature.
Sounds and Notifications
Sets the notification type, event and volume.
Today
Customizes the look and the information that appears on the Today screen.
System Tab
Icon
Program
About
Displays important device information.
Add ring tone
To listen to and select new ring tones.
Backlight
Customizes the backlight and brightness for power saving purposes.
XV6600WOC User Manual
Program
Button Lock
Enables you to lock the buttons on your device except Power button when device
is off.
Certificates
Displays the name of the certificate issuer and the expiration date.
Clock & Alarm
Changes the time and sets alarms.
Device information
Find information about version, hardware, identity and call duration.
Keyboard
Allows you to customize the keyboard settings, eg. to switch on/off the keyboard
backlight when a time limit is reached.
Memory
Displays the memory allocation status and current running programs.
Microphone AGC
Adjusts the volume automatically when you are recording.
Permanent save
Saves contacts to permanent flash memory.
Power
Maximizes battery life.
Regional settings
Customizes the region and relative format for the region you use.
Remove programs
Creates more memory by removing programs.
Screen
Re-calibrates the screen and enable/disable Clear Type feature.
Personalizing
Icon
59
Personalizing
60
XV6600WOC User Manual
Buttons
To customize the program hardware buttons to open your
most used programs :
Tap
→ Settings → Personal tab → Buttons
→ Program Buttons tab
2
Under Select a button, tap the button you want
to assign a program, and then select a program
from Assign a program.
Default settings:
1 - Calender
2 - Contact
3 - Start Menu
4 - Messaging
5 - Internet Explorer
6 - OK/Close
7 - Windows Media
8 - Record
In the Up/Down Control tab, Delay before first repeat
changes the time elapsed before scrolling begins. Repeat
rate changes the time it takes to scroll from one item to the
next. Just press and hold the Up/Down control scrolls through
the items in a list to adjust.
Input
1
Tap
2
On the Input Method tab, select an input method
and change desired options. On the Word
Completion tab, select desired settings for word
completion. On the Options tab, select desired
options for writing and recording. These options
apply to any program on the device where you
can record or write. These options do not apply
to text you enter using the input panel.
→ Settings → Personal tab → Input.
You can also change input options by tapping the
arrow and the Options.
1
2
8
7
3 4 5 6
XV6600WOC User Manual
To add the programs you use most often to the Start Menu .
→ Settings → Personal tab → Menus.
1
Tap
2
Select the programs you want, then tap OK.
Only 7 programs are allowed in the Start Menu.
3
On the New Menu tab, you can select Turn on New button menu and
then select the items to appear on the menu. When you do this, an arrow
appears next to New in the command bar of certain programs such as
Pocket Word, Pocket Excel, Contacts, Calendar and Tasks. You can
tap this arrow and then tap a new item to create.
You can create subfolders and shortcuts to appearon the Start Menu. In
ActiveSync on your PC, click Explore → Double-click My Pocket PC →
click Windows → click Start Menu → then create the folders and shortcuts
that you want.
Owner Information
1
Tap
2
On the Identification tab, enter your personal information.
→ Settings → Personal tab → Owner Information.
On the Notes tab, enter any additional text you want to display when the
device is turned on, such as: Reward if found.
On the Options tab, select Identification Information so that if you lose your
device, it can be returned to you.
Password
1
Tap
2
To enable this function, select how long your mobile device must be turned
off before the password is required for using the device by tapping Prompt
if device unused for.
3
Select the type of password you would like to use : Simple 4 digit or Strong
alphanumeric.
→ Settings → Personal tab → Password.
Personalizing
Menus
61
Personalizing
62
XV6600WOC User Manual
A strong password must have at least 7 characters that are a combination of
uppercase and lowercase letters, numerals, and punctuation.
4
Enter the password and, if necessary, confirm the password.
n
If your device is configured to connect to a network, use a strong password
to help protect network security.
If you forget your password, you must clear the memory before you can
access your device. This will erase all files and data you have created
and programs you have installed. For more information about clearing
memory, please see Appendix A.
If you've used ActiveSync to create a backup file, all of your program data
can be restored. For more information on creating a backup file, also see
Appendix A.
n
n
Sounds and Notifications
1
Tap
2
On the Sounds tab, you can select the actions for which you want to hear
sounds.
3
On the Notifications tab, you can customize how you are notified about
different events. Select the event name and then select the type of reminder.
You can select a special sound, a message, or a flashing light.
n
Turning off sounds and the notification light helps conserve battery
power.
Use Phone settings to change the ring type and volume for your phone.
n
→ Settings → Personal tab → Sounds & Notifications.
Today
You can customize the Today screen the following ways:
a. To change the background :
Tap
→ Settings → Personal tab → Today.
On the Appearance tab, select the desired theme for the background. To
use your own background, select Use this picture as the background then
tap Browse to locate the desired file.
XV6600WOC User Manual
Recommended picture size for the background is 240x320 pixels in JPEG
format.
To beam a favorite theme to a friend, on the Appearance tab, select the
desired theme and tap Beam.
b. To customize the information you want displayed :
Tap
→ Settings → Personal tab → Today → then Items tab.
Select the information you want displayed on the Today screen.
To customize the information further, select an information type, and then
tap Options (not available for all information types).
About
The Version tab displays important device information, including the amount of memory
installed.
On the Device ID tab, you may need to change the device name if you are unable to connect to a network because another device with the same name is already connected.
Backlight
Tap
→ Settings → System tab → Backlight.
Tap the Battery power tab to turn on/off the back-light when using battery
power.
Tap the External power tab to turn on/off the back-light when using external
power.
Tap the Brightness tab to adjust the brightness level.
Using the backlight while on battery power substantially reduces battery
life.
Personalizing
Choose a folder and tap the file you want then tap OK.
63
Personalizing
64
XV6600WOC User Manual
Clock & Alarms
Tap
→ Settings → System tab → Clock &
Alarms.
n
If you visit a particular time zone often, select it as your
Visiting time zone on the Time tab so that you can quickly
see the correct date and time.
n
You can use your device as a travel alarm clock by setting
a wake-up alarm on the Alarms tab. Tap the alarm icon
to select the type of alarm you want.
n
To change the way the date or time is displayed on your
XV6600WOC, go to Regional Settings by tapping
→ Settings → System tab → Regional Settings.
Memory
Tap
→ Settings → System tab → Memory.
n
The Main tab displays the amount of memory the system
has allocated to file and data storage versus program
storage. This tab also displays the amount of memory in
use versus the available memory. For information about
making memory available, see Free Memory in Appendix A.
n
The Storage Card tab displays how much memory is
available on the storage card that is inserted into your
device. If you have more than one card inserted, tap the
list box and then the name of the storage card whose
information you want to view.
n
The Running Programs tab displays the list of currently
active programs. You can stop a program by selecting it
in the list and then tapping Stop or just tap Stop All to
stop all the running programs.
You may need to stop a program if it becomes
unstable or program memory is low.
XV6600WOC User Manual
Tap
→ Settings → System tab → Power.
n
The Battery tab displays the amount of battery power remaining. Battery power
depends on the battery type and how the device is being used.
n
On the Advanced tab, you can select options for turning off your device to conserve
battery power. To conserve the most power, select the option that turns off the device
after 3 minutes or less.
Permanent Save
You can choose to back up Contacts and Appointments, Tasks, and Connection Setting to non-volatile memory. Backing them up in this way means they will not be lost in
the event your device loses all power or you have to perform a full reset.
To backup to FlashROM:
Tap
→ Settings → System tab → and then Permanent Save.
Select the desired item by checking the boxes → tap OK to start backup.
When you select to back up Contacts and Appointments, your XV6600WOC
will automatically back up newly added contacts, appointments or tasks items.
This will not happen for connection settings; if you add a new connection, you
will need to back it up manually.
To restore to FlashROM:
Tap
→ Settings → System tab → and then Permanent Save.
Select the desired item by checking the boxes → tap OK to start
restoring.
Personalizing
Power
65
Personalizing
66
XV6600WOC User Manual
Keyboard
Your XV6600WOC comes with a QWERTY keyboard. You can
access it by sliding down the bottom end of the device. Tap
→ Settings → System tab → and then Keyboard to open the
Keyboard setting program which allows you to switch on the
keyboard backlight, set a time limit for the keyboard backlight
to switch off when it is not being used; then give links so you
can customize the way your keyboard repeats and assign a
favorite program to a specific key.
5.2 Phone Settings
You can easily view and change settings, such as the ring type
and ring tone to be used for incoming calls, and the keypad
tone to be used when entering phone numbers. You can also
protect your phone from unauthorized use. There are two ways
to change phone settings:
Tap
→ Settings → Personal tab → Phone.
To change phone settings from the Phone
keyboard. Tap Tools → Options → Phone tab.
Ring Type
You can change the way that you are notified of incoming calls.
For example, you can choose to be notified by a ring, a vibration, or a combination of both.
Tap the Ring type list, then select the desired option.
Ring Tone
Tap the Ring tone list, then select the sound you want
to use.
n
To set .wav or .mid files as ring tones, use ActiveSync on
your PC to copy the file to the /Windows/Rings folder on
your device. Then, select the sound from the Ring tone
list.
XV6600WOC User Manual
To download ring tones, you can make a connection to the
Internet and then download ring tones that are compatible
with the .wav or .mid format.
Add Ring Tone
Add Ring Tone allows you to quickly find and display all the
ring tones stored on your device, gives you the option to listen,
and then add or remove them from the Phone Settings list
mentioned above.
To display all ring tones on your device, you can
tap
→ Settings → System → then Add
Ring Tone. The program will automatically list
and display all the .wav and .mid files on your
XV6600WOC.
After the ring tones have loaded, you can see
that some are already selected; these are
presently listed in the phone settings.
To play a ring tone, select one by tapping it,
and then tap play. If you don’t like the ring tone,
deselect it; this will add/remove the selected/
deselected ring tones from the list in your phone
settings.
Keypad Tone
You can change the tone you hear when entering a phone
number on the keypad. If set to Tones, the tone is heard
continuously for as long as the number on the keypad is
pressed. If set to Beep, the tone is heard only for one or
two seconds.
Tap the Keypad list, then select the option you
want.
To prevent tones from being heard when entering
a phone number, select Off.
Personalizing
n
67
XV6600WOC User Manual
Services
Services settings on the Settings → Personal → Phone →
Services tab are primarily used to set options such as Voice
Privacy, Network System, and Location Setting.
Feature
Function
Voice Privacy
A method for encrypting voice calls to
provide extra security.
Location Setting
Enables you to allow your network to
lock onto your position or not.
Network System
Enables you to accept roaming
(Standard) or restrict your phone to
calls from your home network only
(Home only)
TTY Mode
Enables the use of a TTY (for the
deaf) machine together with your
device.
Tap Get Settings to access the settings for a
service.
To change service settings from the Phone Dial
screen, tap Tools → Options → Services tab
→ select a service → Get Settings.
Automatic Answer
This feature enables your phone to pick up a call automatically
and transfer it to the headset.
In phone dialer, tap Tools → Options → More.
n
To enable, tick the checkbox next to Headset, and
then see the number of rings after which to pick up.
G
Personalizing
68
Chapter 6
Scheduling and Communicating
- Microsoft Pocket Outlook
6.1 Calendar
6.2 Contacts
6.3 Tasks
6.4 Notes
Microsoft
Pocket Outlook
70
6.1
XV6600WOC User Manual
Calendar: Scheduling
Appointments and Meetings
Use Calendar to schedule appointments, including meetings
and other events. You can check your appointments in any
of several views (Day, Week, Month, and Agenda) and set
Calendar to remind you of appointments with a sound or other
method. Appointments for the day can be displayed on the
Today screen.
1
If you use Outlook on your PC, you can synchronize
appointments between your XV6600WOC and PC.
See ActiveSync in Chapter 4.
1
Tap to go back to view today's appointment.
2
Tap to display or edit the appointment details.
3
Tap to create a new appointment.
4
Tap to change the appointments in various 3
displayed views.
Creating or Changing an
Appointment
To create an appointment, tap New. To select
a new date from a pop-up calendar, tap the
displayed date. To enter or select a new time,
tap the displayed time. Enter the appointment
details, and when finished, tap OK to return to
the calendar.
If you are working in Day view, tap the time slot
for the new appointment and then New to have
the time automatically entered for you.
To change an appointment, tap it in the calendar,
and then tap Edit. Change any appointment detail
by tapping it and entering the new information.
When entering a time, you can type military and
abbreviated time forms, such as 2300 (becomes 11:
00 PM), 913pm (becomes 9:13 PM), 911 (becomes
9:11 AM), and 9p (becomes 9:00 PM).
4
2
XV6600WOC User Manual
71
Send a Meeting Request
You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request will be created
automatically and sent either when you synchronize Inbox or
when you connect to your e-mail server.
1
Create an appointment and enter the meeting
information.
Tap Attendees (you will need to hide the input
panel to see this box).
3
4
Select other desired options and then tap OK.
5
Messaging automatically creates a meeting
request and sends it to the attendees the next
time you synchronize with your PC. Any textual
notes entered in the Notes tab (excluding writing
or recordings) will be sent also.
If you are sending the meeting request through
a connection to an ISP or the network, rather
than through synchronization with your PC, tap
Tools → Options → Appointments tab. In Send
meeting requests via, tap the service you want
to use to send the meeting request.
Using the Summary Screen
When you tap an appointment in Calendar, a
summary screen is displayed. To change the
appointment, tap Edit.
Tap the service you want to use
to send the meeting request.
Microsoft
Pocket Outlook
Select the meeting attendees from the list of
e-mail addresses you’ve entered in Contacts.
Only those contacts with e-mail addresses will
be displayed.
Microsoft
Pocket Outlook
72
XV6600WOC User Manual
Setting a reminder for an appointment
1
In the Calendar, tap the appointment, and then tap the upper portion of the
summary screen when editting the appointment.
2
Tap Reminder and select Remind me.
3
To change how many minutes before the appointment you are reminded, tap
the minutes displayed.
To automatically set a reminder for all new appointments, in the calendar, tap
Tools → Options → Appointments tab and select Set reminders for new
items.
Beaming an appointment
To beam an appointment, in the calendar list, tap and hold the appointment. On the pop-up
menu, tap Beam Appointment.
When using infrared (IR), align the IR ports between the devices so that they
are unobstructed and within a close range.
6.2
Contacts: Tracking Friends and
Colleagues
Contacts maintains a list of your friends and colleagues so that you can easily find the
information you’re looking for, whether you’re at home or on the road. You can enter both
personal and business information.
If you use Outlook on your PC, you can synchronize contacts between your device and
PC. See ActiveSync in Chapter 4.
Viewing contacts
1
Select the category of contacts you want displayed in the list.
2
Tap and enter part of a name to quickly find it in the list.
3
Tap letters, such as h (home), w (work), or m (mobile) to the right of the
contact to see additional phone numbers and e-mail addresses.
4
Tap to display or edit the contact details.
XV6600WOC User Manual
5
1
Tap and hold to display a pop-up menu of
available actions.
To change the way information appears in the list,
tap Tools and then Options.
Tap
→ Programs → Contacts → New.
Use the input panel, enter a name and other
contact information. You will need to scroll down
to see all available fields.
To assign the contact to a category, scroll to and
tap Categories and select a category from the
list. In the contact list, you can display contacts
by category.
To add notes, tap the Notes tab. You can enter
text, draw, or create a recording.
To change a contact, tap it in the contact list, and
then tap Edit. To cancel edits, tap Edit → Undo.
When finished, tap OK to return to the contact list.
If you enter a name with more than 2 words, the
middle word will be recorded as a middle name.
If your contact has a double first or last name,
tap the Name arrow and enter the names in the
proper box.
2
4
5
3
Microsoft
Pocket Outlook
Creating or Changing a Contact :
73
Microsoft
Pocket Outlook
74
XV6600WOC User Manual
To Find a contact:
There are several ways to find a contact:
1
Tap
→ Programs → Find, enter the contact name (first, last, or middle),
phone number, or address, select Contacts for the type, and then tap Go.
2
From Contacts, start typing a contact name until you see it displayed on the
screen. To show all contacts again, tap the text box at the top of the screen
and clear the text, or tap the arrow icon to the right of the text box.
3
Tap one of the sets of letters displayed at the top of the contact list. This takes
you to the contact names beginning with those letters.
4
In the contact list, tap the category list (labeled All Contacts by default) and
tap the category to which you’ve assigned a contact. To show all contacts
again, select All Contacts. To view a contact not assigned to a category,
select No Categories.
5
To view the names of companies your contacts work for, in the contact list, tap
View → By Company. The number of contacts that work for that company
will be displayed to the right of the company name.
6
Press and hold the top of the navigation pad until alphabetical letters appear
on the screen in large type. Then use the navigation pad to scroll through the
alphabet and select a letter.
Beaming a contact
1
To beam a contact, in the contact list, tap and hold the contact. On the pop-up
menu, tap Beam Contact.
2
To beam multiple contacts, tap and drag to select the contacts. Then, tap
Tools → Beam Contacts.
When using infrared (IR), align the IR ports between the devices so that they
are unobstructed and within close range.
XV6600WOC User Manual
75
Changing Options
In the contact list, tap Tools → Options.
1
To increase the available space for displaying
contacts in the list, clear Show ABC tabs.
2
The area code and country/region for new
contacts are automatically entered based on
the information in Country/Region settings.
Using the Summary Screen
6.3
Tasks: Keeping a To Do List
Use Tasks to keep track of things you need to do.
A variety of task information can be displayed on the Today
screen.
If you use Outlook on your PC, you can synchronize tasks between your device and PC. See ActiveSync in Chapter 4.
Creating or Changing a task:
1
To create a task with detailed information, such
as start and due dates, tap
→ Tasks →
New.
2
In the task list, you can display tasks by
category.
To assign the task to a category, tap Categories
and select a category from the list.
To create a new category, tap the Add/Delete
tab, enter the category name, and then tap Add.
The new category is automatically selected in
the Select tab.
Microsoft
Pocket Outlook
When you tap a contact in the contact list, a
summary screen is displayed. To change the contact
information, tap Edit.
Microsoft
Pocket Outlook
76
XV6600WOC User Manual
3
To add notes, tap the Notes tab. You can enter text, draw, or create a
recording. When finished, tap OK to return to the task list.
4
To change a task, tap it in the task list, and then tap Edit.
To quickly create a task, enter text in the Tap here to add a new task box at
the top of the screen. If you don't see this box, tap Tools → Entry Bar.
Setting a reminder for a task
1
In the task list, tap the task, and then tap Edit.
2
Tap the Due box and set a due date if you have not already done so.
3
Tap the Reminder box and select Remind me. You will be reminded at 8:00
in the morning on the due date.
4
To change the reminder date, tap the date displayed.
To be automatically reminded of new tasks with a due date, in the task list, tap
Tools → Options and select Set reminders for new items.
To choose how you are reminded, for example by a sound, tap
→ Personal tab → Sounds & Notifications.
→ Settings
Using the Summary Screen
When you tap a task in the task list, a summary screen is displayed. To change
the task, tap Edit.
Beaming a Task
To beam a task, in the task list, tap and hold the task. On the pop-up menu, tap
Beam Task.
XV6600WOC User Manual
6.4
77
Notes: Capturing Thoughts and Ideas
Notes helps you quickly capture your ideas, notes, and thoughts. You can create a note
using written and typed text, drawings, and recordings. You can also share your notes
with others through e-mail, infrared, and synchronization with your PC. See ActiveSync
in Chapter 4.
To create documents with advanced formatting or templates, such as bulleted
lists and tabs, use word processing software developed for your device, such
as Pocket Word.
1
Tap
2
Create your note by writing, drawing, typing, or recording. See Entering
Information in Chapter 2 for more information about using the input panel,
writing and drawing on the screen, and creating recordings.
→ Programs → Notes → New.
You can insert the date in a note. First, deselect
and make sure that no
drawings are selected. Next, tap and hold anywhere on the note and then
tap Insert Date.
Sending a note via e-mail
1
If you haven’t already set up Messaging to send and receive messages,
please do so now. See the account settings in Chapter 8.
2
In the note list, tap and hold the note or recording. To select multiple notes
or recordings, tap and drag. Then, tap and hold the selected items.
3
On the pop-up menu, tap Send via E-mail. A new message is created with
the item attached.
Microsoft
Pocket Outlook
To create a note:
Microsoft
Pocket Outlook
78
XV6600WOC User Manual
Beam a Note
To beam a note, in the note list, tap and hold the note.
On the pop-up menu, tap Beam File.
Change options
In the note list, tap Tools → Options.
1
From the Default template list, you can select
a pre-designed template to use with all new
notes.
2
If you store most of your notes and recordings
on a storage card, in Save to, tap Storage card
to have new items automatically stored on your
storage card.
Chapter 7
Getting Connected
7.1 About Connections
7.2 Connecting to the Internet
7.3 Terminal Client Service
7.4 Bluetooth
Getting
Connected
80
XV6600WOC User Manual
7.1 About Connections
You can set up connections to the Internet and corporate network at work in order to do
such activities as browse the Internet or intranet, send and receive e-mail and instant
messages, and synchronize information using ActiveSync.
Connections can be made using a modem, wireless network, or network (Ethernet) card. A
modem connection can be used to set up connections with an external modem, or through
your mobile phone network using a cellular line.
Your XV6600WOC has two groups of connection settings: My ISP and My Work Network.
My ISP settings are used to connect to the Internet, and My Work Network settings can
be used to connect to any private network, such as a corporate network you use at work.
Simply fill in the settings and you’ll be ready to start connecting.
7.2 Connecting to the Internet
You can use My ISP settings to connect to the Internet and use the connection to send
and receive e-mail messages and view Web pages.
Connecting to the Internet via ISP
1
Obtain the following information from your ISP:
- ISP server phone number.
- User name.
- Password.
- Access point name.
(required for CDMA connection)
2
Tap
3
To create a new connection, in My ISP, tap Add a new modem connection,
and follow the instructions in the New Connection wizard.
4
Wireless connections can be made via a mobile phone network or CDMA. If
you are using a mobile phone network to connect, in the Select a modem
list, tap Cellular Line.
5
To view additional information for any screen, tap
→ Setting → Connections tab → Connections
.
XV6600WOC User Manual
6
81
To start the connection, begin using the desired program. For example,
switch to Pocket Internet Explorer and browse to a Web page. Your device
will automatically connect.
To change modem connection settings, in either My ISP or My Work Network,
tap Manage existing connections. Select the desired modem connection,
tap Settings, and follow the instructions on the screen.
To access WAP sites through Pocket Internet Explorer, configure your device to use a
WAP gateway. Use the following steps to create a new set of connections to the Internet
with WAP gateway settings.
1
Get the following information from your ISP:
ISP server phone number, user name, and password. Also, contact your
mobile phone service provider and ask for your WAP gateway server name
and port number.
2
Tap
3
Tap Edit my proxy server. If a proxy server has not been set up, tap Set
up my proxy server.
4
In Programs that should automatically connect to and use the Internet, tap
New and enter a name for the ISP connection.
5
On the Proxy Settings tab, select This network connects to the Internet
and This network uses a proxy server to connect to the Internet.
6
If necessary, in the Proxy server box, enter the proxy server name.
7
Tap Advanced.
8
In the WAP box, enter the WAP gateway server name. Under Port, enter
the port number. The most common WAP port number is 9201.
9
Create a modem connection. Also, if necessary, set dialing rules.
→ Settings → Connections tab → Connections → Tasks tab.
Getting
Connected
Setting up a WAP gateway
Getting
Connected
82
XV6600WOC User Manual
Pocket Internet Explorer
Once connected, you can use Pocket Internet Explorer to
view Web HTML, cHTML, xHTML and WAP pages on your
XV6600WOC in two ways: by downloading pages through
synchronization or by connecting to the Internet. While
browsing, you can also download files and programs from
the Internet or intranet.
During synchronization with your PC, download your favorite
links and mobile favorites that are stored in the Mobile Favorites folder in Internet Explorer on the PC.
To synchronize and download your favorite
links from your PC, select Tools → Menu →
Options..→ Sync Options in ActiveSync on
your PC,then select the Favorites checkbox.
Browsing the Internet
Open the Pocket Internet Explorer screen by tapping
→ Internet Explorer.
In the address bar that appears at the top of
the screen, enter the Web address you want to
visit.
Tap
to go to the web address you entered.
Tap
, the Favorites button, then tap the
favorite you want to view.
To add a favorite link while using your XV6600WOC,
go to the page you want to add → tap and hold
on the page, and tap Add to Favorites from the
pop up menu.
Tap
to go back to the Homepage you set.
Tap
to refresh the web page on the screen.
Tap the arrow
to choose from previously
entered addresses.
XV6600WOC User Manual
7.3
83
Terminal Services Client
Using the Terminal Services Client, you can log onto a PC running Terminal Services or
Remote Desktop and use all of the programs available on that PC from your mobile device.
For example, instead of running Microsoft Pocket Word, you can run the PC version of
Microsoft Word and access all of the .doc files on that PC from your XV6600WOC.
Tap
→ Programs → Terminal Services Client.
To connect to a server you have previously connected to, in Recent Servers,
tap a server. To connect to a new server, enter the server’s name in the Server
box. Select the Limit size of server desktop to fit on this screen check
box only when using applications that have been specifically sized for use
with XV6600WOC.
Tap Connect.
If the network administrator has configured Terminal Services Client to
reconnect to disconnected sessions, and you previously disconnected from
a Terminal Server without ending the session, the Terminal Services Client
reconnects to that session.
Navigating Within Terminal Services Client
Once connected to the server, the PC’s screen may more than fill your mobile device’s
screen. If scroll bars are displayed on the server’s screen, you will see more than one set
of scroll bars on your XV6600WOC: one to scroll information on the PC, and one to scroll
the PC display through the Terminal Services window in Terminal Services Client.
To ensure you are scrolling the PC display through Terminal Services Client, use the five
directional buttons at the bottom of the Terminal Services Client screen.
To better fit information on your mobile device’s screen, select Limit size of server desktop to fit on this screen. For best effect, programs on the desktop computer should be
maximized.
Getting
Connected
Connecting to a Terminal Server
Getting
Connected
84
XV6600WOC User Manual
Disconnecting Without Ending a Session
The following commands must be accessed from the Start menu in the Terminal Services window used to access the PC’s commands. Do not use the Start menu on your
XV6600WOC.
In the Terminal Services window, tap Start → Shutdown.
Tap Disconnect.
If your administrator has configured Terminal Services Client to reconnect to
disconnected sessions, you will be reconnected to this session the next time
you connect to this server.
Disconnecting and Ending a Session
In the Terminal Services Client window, tap Start → Shutdown.
Tap Log Off.
Tips and Tricks
Improving display performance
Display performance is improved by decreasing the time it takes for the screen to be
refreshed on the desktop computer.
On your desktop computer, select Start → Settings → Control Panel.
Click Display.
Clear the Transition effects for menus and tooltips check box.
XV6600WOC User Manual
85
Improving browser performance
Performance with Internet Explorer on the desktop computer is improved by decreasing
the time it takes for Web pages to be refreshed.
In Internet Explorer on your PC, select Tools → Internet Options.
Click the Advanced tab.
7.4
Bluetooth
Bluetooth is a short-range wireless communications technology. Unlike infrared, you
don't need to line up the devices to beam information within a closer range when operating with Bluetooth connection.
With Bluetooth powered on, you can send information or perform the following tasks wirelessly between two Bluetooth devices within a range of about 10 meters (30 feet):
n Exchange information, such as files, calendar items, tasks, and contacts or business
cards.
n Synchronize with a PC with Bluetooth capability through an ActiveSync connection.
n Partner with a Bluetooth-enabled mobile phone and use it as a wireless modem.
n Connect to, use, and disconnect to other Bluetooth devices.
Getting
Connected
Clear the Use smooth scrolling check box.
Getting
Connected
86
XV6600WOC User Manual
Using Bluetooth
The Bluetooth icon in the lower-right corner of the Today
screen provides quick access to the Bluetooth Manager and
Bluetooth Settings.
The icon changes subject to the Bluetooth using status :
- Bluetooth is active.
- Bluetooth is disabled (Default status).
- Bluetooth is initializing.
When your Bluetooth is powered on, the LED
indicator for Bluetooth, located on the left upper
corner of your XV6600WOC, will blink blue every
6 seconds to indicate Bluetooth is on or alternate
between blinking blue.
Bluetooth Settings
With Bluetooth Settings, you can :
n Turn Bluetooth on/off and enable/disable Bluetooth services.
n Create or change a name for your XV6600WOC when using
Bluetooth to connect with other devices.
n Set your connection preferences and user profile.
n Specify security settings and define settings for sharing
and connecting.
Turning On Bluetooth
In the Today screen, lower-right corner, by tapping
can turn Bluetooth on by:
or
, you
Selecting Turn Bluetooth ON.
Selecting Bluetooth Settings → and then tap
Turn On.
Tap to create, delete, or
rename a profile
XV6600WOC User Manual
87
Using Profiles
Setting the profiles allows:
n Different users to quickly re-configure the XV6600WOC to the personal preferences.
For example, if Joe and Mary both use the same XV6600WOC, but each uses it for
a different purpose, selecting a pre-configured profile will alter the settings to those
of the appropriate user.
All Bluetooth Settings are saved in the active profile. When your XV6600WOC
is turned off, Bluetooth Settings saves the last-used profile and reloads that
profile the next time your XV6600WOC is turned on.
a. To Create a new profile:
In the General tab → tap the icon
to access a screen from which you can
Add, Rename and Delete a profile.
Tap the New button.
3
Enter a descriptive name for the new profile, for example, Office.
4
Select an existing profile on which to base the new profile.
Tap OK.
The new profile does NOT automatically become the active profile; to activate
the new profile, select it from the Current Profile field on the General tab.
b. To Rename or Delete a profile:
In the General tab → tap the icon
to access a screen from which you can
Add, Rename and Delete a profile.
Tap a profile from the profile name list and then tap Rename or Delete
button to rename or delete the selected profile.
Getting
Connected
n A single user to quickly re-configure the XV6600WOC for a different environment.
If Joe uses his device primarily at the office, but also uses it when traveling, he can
easily switch to a pre-configured profile that has more secure settings for hotel, airport,
or similar “public” environments.
Getting
Connected
88
XV6600WOC User Manual
c. To Save configuration settings in a profile:
When you make changes to the XV6600WOC's configuration, those changes are automatically saved when you select a different profile, turn Bluetooth off, or shut down your
XV6600WOC.
In the General tab → tap the icon
Add, Rename and Delete a profile.
to access a screen from which you can
Select the desired profile from the Current Profile field on the General
tab.
3
Setup your XV6600WOC including the necessary settings in Accessibility
and Services tab described later so that it behaves in your desired
manner.
4
Tap OK and then close the Bluetooth Settings screen; the changes are saved
automatically.
To avoid saving unwanted changes to a regularly used profile, create a new
profile that is based on the profile currently in use, select the new profile, and
then make the changes while the new profile is active.
Setting Accessibility Properties
You can enter or change the accessibility properties to define how your XV6600WOC
interacts with other Bluetooth devices by tapping the Bluetooth icon on the lower-right
corner of Today screen → Bluetooth Settings → Accessibility tab.
Enter the Bluetooth name of your XV6600WOC, as displayed to remote
devices when the associated profile is active if the Use Pocket PC device
name for Bluetooth checkbox is un-checked.
If the Use Pocket PC device name for Bluetooth checkbox is checked, the
name assigned to your XV6600WOC (by tapping
→ Settings → System
tab → About → Device ID tab → Device Name) will always be displayed
to the remote user as the Bluetooth name of your XV6600WOC.
XV6600WOC User Manual
3
4 Other devices can discover me - when this
option is enabled, other Bluetooth devices can
see and report your XV6600WOC. This allows
any device, even those unknown to yours, to
connect to your XV6600WOC.
The ability of remote devices to connect is also
subject to the security restrictions, and whether
Bluetooth is enabled on your XV6600WOC.
Enabling Bluetooth Services
The services that your XV6600WOC provides to other devices
when using Bluetooth include :
n File Transfer - file-related operations such as get a file/use
a file/delete a file, etc.
n Information Exchange - send the default business card
(Pocket Outlook contact) on request.
n Serial Port - Bluetooth serial port operations. Bluetooth
serial ports are used as a replacement for a physical cable
between devices.
n Personal Network Server - join or host a Bluetooth-based
personal area network
n Dial-up Networking - provide access, via a phone line or
other access system, to a remote computer network such
as an Internet service.
n Hands Free - allows you to connect to a remote headset
or other audio device.
3
4
Getting
Connected
Allow other devices to connect - when this option
is enabled, other devices are permitted to connect
to this device. Two mutually exclusive sub-options
provide additional refinement. They are:
n All devices - select this option to allow all
devices to connect.
n Paired devices only - select this option
to allow only devices that have a paired
relationship with your XV6600WOC to
connect.
89
XV6600WOC User Manual
Αll the services can be individually configured by tapping the
Bluetooth icon on the lower-right corner of Today screen →
Bluetooth Settings → Services tab.
In the Services field, select the service to be
configured.
In the Service settings area, enable the desired
options by checking the Enable service box.
Getting
Connected
90
Service Security Settings
Each Bluetooth service has its own individual security settings. Even though the options are the same for each service,
in each case they are specific to the individual service being
configured.
In the Service settings area of the Services tab, tap the
Bluetooth icon in the lower-right corner of Today screen →
Bluetooth Settings:
1
Authorization required
When enabled, your XV6600WOC will require
that each attempt to establish a connection
be individually authorized on the pop up
Authorization Request screen; that is, you
must authorize each connection, when a remote
device attempts to connect to this service.
Authentication (Passkey) required
When enabled, a passkey or a Link Key is
required from the remote device before allowing
the connection.
A passkey is a code you enter to authenticate
connections requested by other devices. This
passkey must be known and used by both parties,
otherwise, the connection will not be allowed.
1
3
4
XV6600WOC User Manual
3
You can also enable the Encryption required function if you want to require
all data exchanged between your XV6600WOC and the remote Bluetooth
device to be encrypted.
4
Some services have advanced configuration options; if available, tab
Advanced to access the additional settings.
Tap the Bluetooth icon on the lower-right corner of Today screen → Bluetooth
Manager.
The Bluetooth Manager provides a friendly user interface for establishing connections
based on the connection preferences and profiles that you have set in the Bluetooth
Settings. With Bluetooth Manager, you can:
n Exchange information or business cards.
n Create, manage, and use the services connection that you have enabled in the
Bluetooth Settings with other remote devices.
n Display shortcuts.
n Control the on-screen display.
Opening Bluetooth Manager automatically turns on Bluetooth.
Exchanging Information or Business Cards
There are two options : Paired devices and Business Card Exchange, when you tap the
Bluetooth icon on the lower-right corner of Today screen → Select Bluetooth Manager
→ and then tap Tools menu.
a. To pair with another device:
Pairing essentially means giving two devices permission to communicate with each
other.
When two devices are paired, they share, and exchange prior to each connection, an
internally generated security key. This security key, called a Link Key, is based on a
unique Bluetooth Device Address, a random number, and a user-defined password.
1
In the Bluetooth Manager screen, select Paired devices from the Menu.
On the Paired devices screen, tap Add.
Getting
Connected
Bluetooth Manager
91
Getting
Connected
92
XV6600WOC User Manual
3
On the Device Pairing screen: tap the
to
access the Select a Bluetooth device screen.
Select one from the available list to return to
the prior screen and populate the Device: field.
Enter the correct password in the Passkey
field.
4
Tap OK.
b. To exchange Business Cards:
1
From the Bluetooth Manager → Tools menu,
→ select Business Card Exchange.
Tap the link at the bottom of the screen to
select a default business card. After the card is
selected, tap OK to return to the Business Card
Exchange screen.
To Send or Exchange business card(s) you
must first specify your default business card in
the Bluetooth Settings screen → Services tab →
Select Information Exchange service → and then
tap Advanced button to set your business card.
3
Tap the Send, Exchange or Request icon, as
appropriate.
4
In the Bluetooth Browser screen, tap the name
of the remote device, and then tap OK.
Bluetooth Connection Wizard
From the Bluetooth Manager, tap the New menu to start the
Bluetooth Connection Wizard, which walks you through the
process of creating a connection. Choose the type of connection and then tap Next. The succeeding wizard screens will
guide you through establishing the parameters of the connection. The exact content of the succeeding screen will vary,
depending on the type of connection being created.
Tap Next to move to the next page, or Back to return to the
previous page.
XV6600WOC User Manual
93
Some of the connection types included in the wizard can help you perform are :
n
Hands-free/Headset setup (optional item):
Locate and pair with a Bluetooth headset or other hands-free device.
n
ActiveSync via Bluetooth:
n
Browse files on a remote device:
Locate and connect to a remote device to examine the contents of a remote folder
and/or send/receive file(s) to/from that device. An optional connection shortcut can be
created.
n
Connect to a network:
Locate a remote device that can provide access to the Internet. Examples include a
Bluetooth cell phone, a Bluetooth modem, or possibly a Local Area Network. Once
the connection shortcut is created, open the connection and then open a browser such
as Internet Explorer.
n
Join a Personal Network:
Create, or locate and join, a Bluetooth network. Create a shortcut to a connection that can
be used to share files, collaborate with co-workers, participate in multiplayer games….
n
Exchange business cards:
Locate and connect to a remote Bluetooth device and then send, receive and/or exchange
electronic business cards with that device.
n
Explore a Bluetooth device:
Locate a remote device, view the services the remote device can provide, and then create
a connection shortcut to one or more of those services (hold down the Navigation/Action
Button ) to tap and select multiple services.
Getting
Connected
Locate a Bluetooth PC and create a connection shortcut that will establish a synchronization link between the Personal Information Manager on your XV6600WOC and
the desktop computer.
Getting
Connected
94
XV6600WOC User Manual
a. Using a Serial Port Connection
The use of a Bluetooth wireless serial port connection is
identical to the use of a physical cable serial port connection
between two devices. As with a physical connection, the application that will use the connection must be configured to
use the correct serial port.
To determine the communications port assigned to the
Bluetooth serial port:
1
Tap the Bluetooth icon on the lower-right
corner of Today screen → Bluetooth Settings
→ Services tab.
Select Serial Port from the services area → and
then tap Advanced.
3
The Outbound COM Port is the lower listing on
the screen. You must configure the application
that will use the Bluetooth Serial Port to send
data to this port.
For more information about configuring your
application's Outbound COM port, refer to the
application's documentation.
To establish a serial connection:
1
Tap the Bluetooth icon on the lower-right corner
of Today screen → Bluetooth Manager.
Tap New → select Explore a Bluetooth device
→ tap Next.
3
Follow the connection wizard instructions.
b. Setting up a Bluetooth Hands-free/Headset
Connection (optional item)
1
From the Today screen → tap Bluetooth icon
→ Bluetooth Manager.
XV6600WOC User Manual
95
Tap New → Hands-free/Headset setup → Tap Next.
Be sure that the Hands-free device you are trying to connect to is ready to
receive incoming connection requests. Please refer to the device's manual
for more information.
3
Follow the connection wizard instructions.
You can set up an ActiveSync partnership with a Bluetooth-enabled computer. First,
you need to set up the Bluetooth Configuration of your computer (follow the instruction
in the user manual of your Bluetooth device or PC), then set up your XV6600WOC.
To establish an ActiveSync connection on your XV6600WOC:
1
From the Today screen → tap Bluetooth icon → Bluetooth Manager.
Tap New → ActiveSync via Bluetooth → Next.
3
Follow the connection wizard instructions.
Be sure the ActiveSync COM port setting on your PC is the same as the
COM port setting used for Bluetooth on your PC.
4
Follow the Bluetooth Browser screen, select the PC you want to
synchronize with → tap Next.
Under Serial Port Selection → select the name of the serial port for the
PC selected above → then tap Next → Finish.
d. Dial-Up Networking : Connect to Remote PC
Dial-up Networking (DUN) allows you to connect to a remote computer via a phone
line. Once connected, you can browse the Internet, check your e-mail, etc.
The remote Bluetooth device that will provide the Dial-up Networking service must
have access to a telephone system (either a hard-wired or cellular connection).
Devices that might provide the Dial-up Networking service include:
n Bluetooth-enabled cellular telephones
n Bluetooth-enabled desktop computers that are attached to a telephone system
n Bluetooth modems.
Getting
Connected
c. Setting up an ActiveSync via Bluetooth on your XV6600WOC
Getting
Connected
96
XV6600WOC User Manual
The remote computer to which you are connecting must also be attached to the phone
system and capable of answering a call.
To use Dial-up Networking :
1
From the Today screen → tap Bluetooth icon → Bluetooth Manager.
Tap New → Connect to a network → Next.
3
Follow the connection wizard instructions.
After you create the Dial-up Networking shortcut with a device → tap and
hold the shortcut icon in the My Shortcuts tab of the Bluetooth Manager →
and tap Connect.
4
Tap New Connection → Tap OK.
Enter a name for the connection in the Connection Name field.
Enter a phone number. You may need to enter the country code and area
code, depending on where you are calling.
7
Tap OK to begin dialing.
To make this connection the default dial-up connection for Pocket Internet Explorer when
using Bluetooth modem, you still need to complete the following steps:
1
From the Today screen, tap
→ Settings → Connections tab.
Tap the Connections icon → Advanced tab → Select Networks.
3
Enable Bluetooth Settings from the dropdown list.
e. Send via Bluetooth
Pocket Outlook Contacts, Calendar items, and Tasks can be sent individually or collectively to a remote device.
To send data via Bluetooth transfer :
1
Tap
→ Programs → open Calendar, Contacts or Tasks.
Highlight the item(s) to be sent
3
Tap-and-hold the item(s), and from the pop-up menu, tap Send via
Bluetooth.
XV6600WOC User Manual
4
f.
97
On the Select a Bluetooth device screen, tap the
name of the destination device, and then tap OK.
Bluetooth Personal Area Network
Bluetooth personal area networks are subject to the same
security settings that govern other Bluetooth communications (service availability, authorization, authentication, and
encryption).
One Bluetooth device must be the host of the personal
area network. Other Bluetooth devices join the network
as clients. The host can accept and reject clients on an
individual basis.
To host a Personal Area Network :
1
From Bluetooth Manager → select New →
Connect → Join a personal network → and
then tap Next.
On the next wizard screen select Host a
personal network → and then tap Next.
3
Add remote devices to the Bluetooth Personal
Area Network, if desired:
- Tap the Add button and select the device to
be added.
-
Add additional devices, if desired (up to eight
total, including the host).
After all the desired devices have been added,
tap OK to complete the setup and close the
wizard.
Adding devices is optional; devices do not have to
be added to the personal area network when the
Host is configured. Devices can join the personal
area network later.
Getting
Connected
A Bluetooth personal area network is a private, temporary,
ad-hoc network of up to eight devices. A Bluetooth personal
area network makes it easy to exchange information that
would normally require a TCP/IP network. For example, most
chat utilities, multi-player games, etc. are fully functional in a
Bluetooth personal area network environment.
Getting
Connected
98
XV6600WOC User Manual
To join a Personal Area Network :
1
From Bluetooth Manager → select New → Connect → Join a personal
network → and then tap Next.
On the next wizard screen select Join a personal network → and then tap
Next.
The Bluetooth Browser appears; select the host of the personal area network → and
then tap Next to establish a connection to the personal area network. → If asked to enter
IP network settings select Use server-assigned IP address → and then tap OK.
The network host’s authorization and authentication settings, and/or its Personal
Area Network service availability, may prevent you from joining the network.
Any application that requires a network connection can use the Personal Area
Network connection.
My Shortcuts
The default tab on the Bluetooth Manager is My Shortcuts. This screen displays the
icons that have been created for connections to other devices. The icons provide visual
feedback about the status of the connection to which they are linked.
The double-tap is context sensitive:
n If the connection is not open—double-tap its icon to establish a connection.
n If the connection is open—double-tap its icon to display the connection’s status.
Connections can also be opened/closed, and other options accessed, using the tap-andhold technique. If you tap a connection icon and hold the stylus in place for a few seconds,
a context sensitive menu appears.
Active Connections
This tab displays the active Outgoing and Incoming Connections on your
XV6600WOC.
Chapter 8
Messaging Features
8.1 E-Mail Messages
8.2 Messaging
8.3 MSN Messenger
8.4 Managing Messages
and Folders
Messaging
Features
100
8.1
XV6600WOC User Manual
E-mail Messages : Using Messaging
You can set up a connection to an e-mail server so that you can send and receive e-mail
messages by using a modem or network connection and Inbox on your device.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP
gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service
you intend to use, first set up and name the e-mail service. If you use the same service
to connect to different mailboxes, set up and name each mailbox connection.
To set up an e-mail service :
1
Open Messaging on your device, then tap Accounts → New Account.
Follow the directions in the New Account Wizard.
2
Fill in your e-mail address then tap Next.
Tapping Next will initiate auto-configuration, which attempts to connect your
XV6600WOC to your e-mail server and automatically download the necessary
e-mail connection settings.
n
If auto-configuration is successful, you can immediately begin sending/
receiving e-mail.
n
If auto-configuration is unsuccessful, you will need to manually enter the
settings.
3
Enter Your name, User name and Password, then tap Next.
4
From the drop down menu select the Account type that your e-mail provider
supports (POP3 or IMAP4).
5
Enter a Name for your e-mail account then tap Next.
XV6600WOC User Manual
6
101
Enter your e-mail provider’s server name information for Incoming mail and
Outgoing mail, then tap Finish. When finished, to connect to your e-mail
server, tap Accounts → Connect.
For an explanation of a screen, tap
and then Help.
Sending and Receiving E-mail
You can use Inbox to send and receive e-mail messages in either of these ways:
n
Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on
your PC.
n
Connect directly to an e-mail server through an Internet service provider (ISP) or a
network.
You also can use Messaging to send and receive Text Messages; it supports 8 bits of data
with class 0, 1, 2, 3, and Unstructured Supplementary Service Data (USSD) as well.
a. Synchronizing E-mail Messages
During synchronization:
n
Messages are copied from the mail folders of Exchange or Outlook on your PC to
the ActiveSync folder in Inbox on your device. By default, you will receive messages
from the past five days only, and the first 100 lines of each message.
n
E-mail messages in the Outbox folder on your device are transferred to Exchange
or Outlook, and then sent from those programs.
E-mail messages in folders must be selected in ActiveSync on your PC in order to be
transferred.
Messaging
Features
E-mail messages can be synchronized as part of the general synchronization process.
You will need to enable Inbox synchronization in ActiveSync. For information on enabling
Inbox synchronization, see ActiveSync Help on the PC.
Messaging
Features
102
XV6600WOC User Manual
b. Connecting Directly to an E-mail Server
n
Once your e-mail account is set up and you're connected, new messages will be
downloaded to the device's Inbox folder, and messages in the device Outbox folder
will be sent.
n
When you delete a message on your device that was downloaded from your e-mail
server, it will also be deleted from the e-mail server the next time you connect.
n
You can work online or offline. When working online, you read and respond to messages while connected. Messages are sent as soon as you tap Send, which saves
space on your device.
n
When working offline, once you have downloaded new message headers or partial
messages, you can disconnect from the e-mail server and then decide which messages to download completely. The next time you connect, Inbox downloads the
complete messages you have marked for retrieval and sends the messages you
have composed.
c. Using the Message List
n
Messages you receive are displayed in the message list. By default, the most recently
received messages are displayed first in the list.
n
When you receive a message, tap to open it. Unread messages are displayed in
bold.
n
You can mark the messages that you want to retrieve in full during your next synchronization or e-mail server connection. In the message list, tap and hold the message
you want to retrieve. On the pop up menu, tap Mark for Download. The icons in the
Inbox message list provide visual indication of message status.
n
Specify your downloading preferences when you set up the service or select your
synchronization options. You can change them at any time:
1 Change options for Inbox synchronization using ActiveSync options. For more
information, see ActiveSync Help.
2 Change options for direct e-mail server connections in Inbox on your device. Tap
Tools → Options. On the Account tab, tap the service you want to change.
Tap and hold the service and select Delete to remove a service.
XV6600WOC User Manual
103
d. Creating an E-mail message
1
Tap New.
2
In the To field, enter either the e-mail address of one or more recipients,
separating them with a semicolon, or select a name from the contact list by
tapping the Address Book
button. All e-mail addresses entered in the
e-mail fields in Contacts appear in the Address Book.
Phone messages can be sent by entering the phone numbers in the To
field.
3
Compose your message. To enter preset or frequently used messages, tap
My Text and select a message.
4
Tap the
button when you have finished the message. If you are working
offline, the message is moved to the Outbox folder and will be sent the next
time you connect.
Swap between Text Messages and Outlook Email by tapping Account.
Messaging
Features
Messaging
Features
104
XV6600WOC User Manual
8.2
Messaging
Messages can be sent in two ways :
n
Go to Messaging, open a new e-mail message and
select Outlook Email or Text Messages account in the
Account type options.
n
Or you can directly send in phone dialer in the Tools menu
bar.
To send Text Messages in phone
dialer :
1
In the Phone Dialer screen, tap Tools → Send
Text Message. A new message screen appears
in Inbox.
2
In the To field, enter the Phone number of
one or more recipients, separating them with
a semicolon, or select a name from the contact
list by tapping the Address Book
button.
3
Compose your message. To enter preset or
frequently used messages, tap My Text and
select a message.
4
Tap the
when you have finished the
message. If you are working offline, the message
is moved to the Outbox folder and will be sent
the next time you connect.
Text Messages cannot be used to send e-mail
messages. You can tap the double arrows next
to the Subject field to show the complete header.
From the Account list, select an e-mail account.
If you are sending a text message and want to
know if it was received, tap Tools, Options, and
select Request message delivery notification
before sending the message.
XV6600WOC User Manual
8.3
105
MSN Messenger : Instant Messaging
MSNMessenger on your mobile device is an instant messaging program that lets
you:
n
See who is online.
n
Send and receive instant messages.
n
Have instant message conversations with groups of contacts.
n
Notify contacts of your on-line status.
n
Block contacts from seeing your status or sending you messages.
To use MSN Messenger, you must have a Microsoft Passport TM account or a Microsoft
Exchange e-mail account. Once you have obtained one of these accounts, you are ready
to sign in to MSN Messenger.
If you have a Hotmail  or MSN account, you already have a Passport.
n To set up a Microsoft Passport account, go to
http://www.passport.com
To switch to MSN Messenger :
Tap
→ Program → MSN Messenger
Setting Up and Signing In
1
Connect to the Internet using any methods outlined in Chapter 7 Getting
Connected.
2
Tap anywhere on the MSN Messenger screen, enter your sign-in name and
password, then tap Sign in.
Or tap Tools → Options → Accounts tab to set your sign-in name and
password by selecting Enable MSN Messenger Service.
Messaging
Features
n To set up a Hotmail account, go to
http://www.hotmail.com
Messaging
Features
106
XV6600WOC User Manual
Your sign-in name is usually in the form :
username@domain.com .
If you already use MSN Messenger on your PC,
your contacts will automatically appear on your
device.
Working with Contacts
The MSN Messenger window displays all of your messenger contacts at a glance, divided into Online and Not Online
categories. From this view, while connected, you can chat,
send e-mail, block a contact from chatting with you, or delete
contacts from your list using the pop-up menu.
To see others online without being seen, open the
Tools menu, tap My Status and select Appear
Offline. If you block a contact, you will appear
offline but will remain on the blocked contact’s list.
To unblock a contact, tap and hold the contact,
then tap Unblock on the pop up menu.
Chatting with Contacts
Tap a contact name to open a chat window. Enter your message in the text entry area at the bottom of the screen, or tap
My Text to enter a preset message, then tap Send. To invite
another contact to multi-user chat, open the Tools menu, tap
Invite then tap the contact you want to invite.
To know if the contact you are chatting with is responding,
look for the message under the text entry area.
For more information on using MSN Messenger, tap
→ Help.
XV6600WOC User Manual
107
8.4 Managing Messages and
Folders
By default, messages are displayed in one of five folders for
each service you have created: Inbox, Deleted Items, Drafts,
Outbox, and Sent Items. The Deleted Items folder contains
messages that have been deleted on the device. The behavior
of the Deleted and Sent Items folders depends on the options
you have chosen. In the message list, tap Tools and then
Options. On the Message tab, select your options.
To organize messages into additional folders, create new
folders by tapping Tools, then Manage Folders. To move a
message to another folder, in the message list, tap and hold
the message and then tap Move to on the pop up menu.
Folder behavior with a direct
connection to an e-mail server
The behavior of the folders you create depends on whether
you are using ActiveSync, SMS, POP3, or IMAP4.
n If you use Messaging, messages are stored in the Inbox
folder of the Text Messages category.
Messaging
Features
n If you use ActiveSync, e-mail messages in the Inbox
folder in Outlook will automatically be synchronized with
your device. You can select to synchronize additional
folders by designating them for ActiveSync. The folders
you created and the messages you moved will then be
mirrored on the server. For example, if you move two
messages from the Inbox folder to a folder named Family,
and you have designated Family for synchronization, the
server creates a copy of the Family folder and copies the
messages into that folder. You can then read the messages while away from your PC.
Messaging
Features
108
XV6600WOC User Manual
n If you use POP3 and you move e-mail messages to a
folder you created, the link is broken between the messages on the device and their copies on the mail server.
The next time you connect, the mail server will see that
the messages are missing from the device Inbox and
delete them from the server. This prevents you from
having duplicate copies of a message, but it also means
that you will no longer have access to messages that
you move to folders created from anywhere except the
device.
n If you use IMAP4, the folders you created and the email messages you moved are mirrored on the server.
Therefore, messages are available to you anytime you
connect to your mail server, whether it is from your
device or PC. This synchronization of folders occurs
whenever you connect to your mail server; create new
folders, or rename/delete folders when connected.
Chapter 9
Companion Programs
9.1 Album
9.2 Pocket Word
9.3 Pocket Excel
9.4 Windows Media Player
9.5 Pictures
Companion
Programs
110
9.1
XV6600WOC User Manual
Album
You can select Album from the Program menu to view image and video files, and to play audio files. Four view modes
are available: Thumbnail view, Detailed view, Full screen
view, and Slide Show view.
To enter Album mode,
Tap
→ Program →
Thumbnail View Mode
The first time you enter Album, your \My Documents\My
Pictures folder will be searched initially.
n You can manually change the position of a
thumbnail simply by pressing your stylus on it
and then dragging it to the desired location.
n To select multiple thumbnails, press your stylus
in an empty part of the screen, then drag your
stylus across all thumbnails you want to include
in the multi-selection.
1
Current folder is shown here. Tap this field if you
want to search a different folder.
2
Tap to select a different thumbnail
size.
3
Tap to change the way the
1
2 3
4
7
thumbnails are sorted.
4
This speaker icon indicates
that audio annotation has been
recorded and associated with
this file.
6 5
XV6600WOC User Manual
5
Tap to switch to Slide Show view.
6
Tap to switch to Detailed view. (Or, tap directly
on a thumbnail to load that file into Detailed
View.) If an audio or video file, it will begin
playing.
7
An icon in the lower left or right corner of a
thumbnail indicates various meanings:
111
List View:
- indicates that text annotation has been
associated with this file.
G - indicates an animated GIF file.
V - indicates that it is a video file.
- indicates that audio annotation has been
associated with this file.
The pop up menu when you tap and
hold on a thumbnail.
n To open a convenient pop-up menu that
contains frequently used commands, type and
hold your stylus on the thumbnail you want to
operate on.
n To see a still image in an enlarged view, or
to play a video or audio file, tap the desired
thumbnail.
To make an annotation on your
file:
1
In the Thumbnail View mode screen, Select
the desired file, then select the Annotate...
command from Edit menu.
n After text annotation has been added, an
icon will be shown in the thumbnail. A separate
text file will be created for that text.
n After audio annotation has been added, an
icon will be shown in the thumbnail. A
separate audio file, in the WAV file format, will
be created.
Companion
Programs
This command lets you add (or remove) text or audio annotation for a file. The associated text and/or audio recording can
then be set to display/play during a Slide Show.
Companion
Programs
112
XV6600WOC User Manual
2
If you wish to associate text with the file, enter it in the text box.
3
To create an audio recording (either voice or music) as an annotation using
your built-in XV6600WOC microphone, tap
to begin recording, tap
to stop recording.
If an audio recording already exists and you then tap the Record button,
there is no warning confirmation. Your previous recording will be instantly
lost and overwritten by the new recording. If you have tapped Remove Voice
by accident, simply tap Cancel (This cancels the removal operation so that
the audio is retrieved).
Sending E-mail in Album
1
First select the desired file. Tap Tools, then select an option from the
menu.
2
Follow the relevant procedures for sending that type of message.
To set audio files as Ring Tones
Simply select the desired file, then select Set as Ring Tone from the Tools Menu (or
the menu that pops up when you tap and hold on a thumbnail). The previous ring tone
will be immediately replaced. A message will display the filename and confirm that the
operation was successful.
Options in Album Settings
To change the settings when using Album, tap Options on the Tools menu.
Two tabs are available: General and Slide Show.
XV6600WOC User Manual
113
- General tab
Function
Default zoom
Function
Explanation
The setting in the Default Zoom field controls the size of the
selected file when it is initially displayed in Detailed View. However,
if you want files to always be initially displayed in their original size,
select Original Size from the drop-down list box.
Explanation
Auto rotate
If None is selected, no automatic rotation will take place when
a file is displayed in Detailed View (but you can still rotate
the display manually using the Rotate Clockwise and Rotate
Counterclockwise icons on the Toolbar in Detailed View).
Select Left to automatically rotate images 90 degrees to the left in
Detailed View, or Right if you want rotation to occur 90 degrees to
the right.
Animation speed
The setting in the Animation Speed field controls the speed at
which animated GIF files will be played. By default, this is set to
Normal. You can select Faster, Slower, or No Delay from the
drop-down list.
Keep backlight If you have set your Backlight to dim after a certain number of seconds,
on while playing you can override it by checking this checkbox. This ensures that the
video
Backlight will not dim during your video playbacks.
The Adjust Gamma setting controls image brightness/darkness.
The minimum setting of 0.01 will cause images to display very dark.
The maximum setting of 3.00 will cause them to display very light
(“wash out”). If you change this setting, you can conveniently reset
it to 1.00 by tapping the Reset button. This feature assists you in
viewing an image more easily under different lighting conditions.
Keep system
powered on
during video and
audio playback
Overrides your system Power settings to ensure that the system will
not automatically power off your device whenever a video playback
or audio playback is in progress.
Companion
Programs
Adjust Gamma
Companion
Programs
114
XV6600WOC User Manual
Association tab
You can associate any or all of the supported file types with
the Album program. When selecting a file of the associated
type in the File Explorer, it will automatically be opened using
the album application. ( If Album is not already running when
you select the associated file type, Album will launch.)
Slide Show tab
These settings control only the behavior of Slide Show view
mode. These options are mostly self-explanatory. Just choose
the item you need and follow the relevant procedures for the
way you want the Slide Show to work.
Detailed View Mode
Detailed View mode displays the selected file in an enlarged
view, and you can further manipulate the view in various ways
(zoom, rotate, pan, etc.).
1
Toolbar
2
Command Bar
3
Hide or display the Toolbar.
4
Switch to Thumbnail view.
5
Switch to Slide Show view.
1
2
3
4 5
XV6600WOC User Manual
115
Icons on the Toolbar
Previous file
Next file
Rotate
Clockwise
Rotate Counterclockwise
(90 degrees each time tapped)
Switch to Full
Screen view.
Zoom
Out
Zoom
In
Fit to
window
Toggles the Quick View window
open and closed. Available only
when current file is an image file.
Images too big for screen
1
2
Whenever the image is too large to be shown
in the display area in its entirety, you can simply
press your stylus anywhere in the display area
and drag, to interactively quick-pan the image
to any desired position.
Alternatively, you can open the Quick View
window as shown on the right, by tapping the
Quick View icon on the Toolbar. The dotted
outline within the Quick View window shows
the currently displayed portion, in relation to
the entire image. Drag the outline within the
Quick View window to the desired position, or
tap within the Quick View window to jump the
outline to a different position. When satisfied
with the position, tap the Quick View icon again
to close the Quick View window.
Companion
Programs
Companion
Programs
116
XV6600WOC User Manual
To set as Today Wallpaper
This command allows you to change the background image
of the Today screen on your XV6600WOC to any image you
want.
1
In Album, tap to open a video file or image you
want to use as the image for the wallpaper.
2
If desired, you can manipulate it in any way you
wish: Zoom In or Out, Rotate, Pan, etc. The exact
state of the image as displayed on your screen will
be used as the Today screen image.
Likewise, if you have chosen a video file and do
not wish to use the first frame of the video as the
wallpaper, you can start playing the video and then
open the Tools Menu at the frame you want to use.
(The video is paused when the menu is open.)
3
Select Set as Today Wallpaper. The message
“The Today screen background image has
been successfully changed” will display.
To Reset the Today Screen back to the
Default Wallpaper:
If you later decide that you want to re-set the Today screen
back to the original default background:
Tap
→ Settings → Today icon in the Personal tab.
Select Windows Default in the list, then make sure
the Use this picture as the background checkbox is
checked, then tap OK.
XV6600WOC User Manual
117
Slide Show View
When in Thumbnail View or Detailed View, you can tap Slide Show the icon in the
Command Bar to enter Slide Show mode.
In Slide Show mode, all image, video, and audio files will automatically be displayed/
played, one after another. If video and audio files are encountered during a Slide Show,
they will be played once, and then the next file in the Slide Show will be displayed/played.
However, you can play it over again manually if desired.
Tapping anywhere on the screen will momentarily display the Toolbar.
Tap to re-display the previous
file. Tap repeatedly to quickly
Rewind to the desired file.
(The three left most icons
become available after Stop
has been tapped.)
Exits Slide Show
mode and enters
Detailed View
mode.
Tap to resume playing a
Slide Show that has been
stopped.
Exits Slide Show mode
and enters Thumbnail
View mode.
Tap to stop playback
and stay on the current
slide.
Slide Show Properties. Lets you set
Transition Effects, Rotation, Text
display, Audio, Delay Time between
slides (for image files), Random or
forward-sequential display, etc. in the
Slide Show Options screen.
Companion
Programs
Tap once (or
repeatedly) to Fast
Forward to the next
sequential files.
Companion
Programs
118
XV6600WOC User Manual
Full Screen View Mode
You can enter Full Screen View only from Detailed View. When in Detailed View mode,
simply tap the Full Screen icon on the Toolbar to switch to Full Screen.
Tap to switch to Full Screen
View mode.
As with Detailed View, if the image or video is
currently displayed in a size that is too large to
fit in its entirety on the screen, you can “pan” the
desired portion into view by pressing and dragging
your stylus on the screen.
When you are ready to exit Full Screen View, tap
anywhere on the screen to display the Toolbar. Tap
the leftmost icon to exit. (If no action is taken, the
Toolbar will automatically disappear again after a
few seconds.)
XV6600WOC User Manual
9.2
119
Pocket Word
Pocket Word works with Microsoft Word on your PC to give you easy access to copies
of your documents. You can create new documents on your device, or you can copy
documents from your PC to your device. Synchronize documents between your PC and
your device so that you have the most up-to-date content in both locations.
To create a new file :
1
Tap
→ Programs → Pocket Word → New.
appears.
2
If you have selected a template for new documents in the Tool → Options
dialog box, that template appears with appropriate text and formatting
already provided.
A blank document
You can open only one document at a time; when you open a second
document, you will be asked to save the first. You can save a document you
create or edit in a variety of formats, including Word (.doc), Pocket Word
(.psw), Rich Text Format (.rtf), and Plain Text (.txt).
Pocket Word contains a list of the files stored on your device. Tap a file in the list to
open it. To delete, make copies of, and send files, tap and hold a file in the list. Then,
select the appropriate action on the pop up menu.
Companion
Programs
Companion
Programs
120
XV6600WOC User Manual
1
Select a specific folder if you only want to list the
Word files in the folder.
2
Tap to change the sort order of the list.
3
Tap to open a document.
4
Tap and hold an item to see a pop-up menu of
actions.
5
Tap to create a new document.
You can change the zoom magnification by
tapping View and then Zoom. Select a higher
percentage to enter text and a lower one to see
more of your document.
If you are opening a Word document created on
a PC, select Wrap to Window on the View menu
so that you can see the entire document.
Entering Information in a New File
You can enter information in Pocket Word in one of four
modes (typing, writing, drawing, and recording), which are
displayed on the View menu. Each mode has its own toolbar,
which you can show and hide by tapping the Show/Hide
Toolbar button on the command bar.
a. Typing Mode
n
Using the input panel, enter typed text into the document.
For more information on entering typed text, see Chapter
2.
n
To format or edit existing text, first select it by using your
stylus to drag through the text. You can search a document for text by tapping Edit → Find/Replace.
1
2
3
4
5
XV6600WOC User Manual
121
Entering Information in a New File
(Cont’d.)
b. Writing Mode
In writing mode, use your stylus to write directly on the screen.
Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write
more easily. For more information on writing and selecting
writing, see Chapter 2.
If you cross three ruled lines in a single stylus
stroke, the writing becomes a drawing and can
be edited and manipulated as described in the
following section.
Written words are converted to graphics (metafiles)
when a Pocket Word document is converted to a
Word document on your PC.
c. Drawing Mode
d. Recording Mode
In recording mode, you can embed a recording into your document. Recordings are saved as .wav files. For more information on recording, see Making a Recording in Chapter 2. For
more information on using Pocket Word, tap
→ Help.
Companion
Programs
In drawing mode, use your stylus to draw on the screen.
Gridlines appear as a guide. When you lift your stylus off
the screen after the first stroke, you’ll see a drawing box
indicating the boundaries of the drawing. Every subsequent
stroke within or touching the drawing box becomes part of
the drawing. For more information on drawing and selecting
drawings, see Chapter 2.
Companion
Programs
122
9.3
XV6600WOC User Manual
Pocket Excel
Pocket Excel works with Microsoft Excel on your PC to
provide easy access to copies of your workbooks. You can
create new workbooks on your device, or you can copy workbooks from your PC to your device. Synchronize workbooks
between your PC and your device so that you have the most
up-to-date content in both locations.
To Create a new Pocket Excel File
1
Tap
→ Programs → Pocket Excel → New.
A blank workbook appears.
2
If you have selected a template for new
workbooks in the Options dialog box, that
template appears with appropriate text and
formatting already provided.
Pocket Excel provides fundamental spreadsheet tools, such
as formulas, functions, sorting, and filtering. To display the
toolbar, tap View → Toolbar.
You can open only one workbook at a time; when
you open a second workbook, you will be asked
to save the first. You can save a workbook you
create or edit in a variety of formats, including
Pocket Excel (.pxl) and Excel (.xls).
If your workbook contains sensitive
information, you can protect it with a
password. To do so, open the workbook;
tap Edit → Password. Every time you open the
workbook, you will need to enter the password,
so choose one that is easy for you to remember
but hard for others to guess.
XV6600WOC User Manual
123
Tips for Working in Pocket Excel
Note the following when working in large worksheets in
Pocket Excel:
View in full screen mode to see as much of your worksheet
as possible. Tap View → Full Screen. To exit full screen
mode, tap Restore.
n
Show and hide window elements. Tap View → tap the
elements you want to show or hide.
n
Freeze panes on a worksheet. First select the cell where
you want to freeze panes. Tap View, then Freeze Panes.
You might want to freeze the top and left most panes in a
worksheet to keep row and column labels visible as you
scroll through a sheet.
n
Split panes to view different areas of a large worksheet.
Tap View → Split. Then drag the split bar to where you
want it. To remove the split, tap View → Remove Split.
n
Show and hide rows and columns. To hide a row or column, select a cell in the row or column you want to hide.
Then tap Format → Row or Column → Hide. To show
a hidden row or column, tap Tools → Go To, and then
type a reference that is in the hidden row or column. Then
tap Format → Row or Column → Unhide.
Companion
Programs
n
Companion
Programs
124
9.4
XV6600WOC User Manual
Windows Media Player for XV6600WOC
Use Microsoft Windows Media Player for XV6600WOC to play digital audio and video
files that are stored on your device or on a network. To switch to Windows Media Player
for XV6600WOC, tap
→ Windows Media.
Use Microsoft Windows Media Player on your PC to copy digital audio and
video files to your XV6600WOC. Your XV6600WOC can play Windows Media
and MP3 files.
For more information about using Windows Media Player for XV6600WOC, tap
→ Help.
XV6600WOC User Manual
9.5
125
Pictures
Pictures collects, organizes and sorts .jpg picture files on your
device. You can download images to your PC, and then use
ActiveSync to copy the files to your XV6600WOC. After that,
you can view the images as a slide show.
Pictures can also be stored and transferred to your
device from an MMC, SD or digital camera card.
Insert a card into the memory card slot and then
copy or drag the pictures from your PC to the My
Documents directory on the memory card (If the
memory card does not have a My Documents
directory you must create one first).
Transferring Pictures
(Not available on all versions of the XV6600.)
Pictures stored on your PC can be synchronized with Pictures
on your device. Picture synchronization is not automatically
selected in ActiveSync. You need to tap the sync option Files
in ActiveSync on your desktop PC to activate this function.
Finding and listing pictures
→ Programs → Pictures.
Tap
2
Tap My Pictures and select a folder from the dropdown menu.
Companion
Programs
1
Viewing Pictures
to view pictures as a slide
1
In Picture, tap
show.
2
Tap
to view pictures stored in your My Pictures
folder.
3
Tap
card.
to view pictures stored on a storage
1
2
3
Companion
Programs
126
XV6600WOC User Manual
n
Tap anywhere on the screen to display the
Slide Show toolbar, which you can use to
pause the slide show, rotate the view, and
more.
n
Press the Left / Right controls to move
forward or backward through the slides.
Sorting Pictures
1
Tap
2
Tap Name and select
an option from the
drop-down menu.
→ Programs → Pictures.
Deleting an Image
Hold the stylus firmly on the file name of the picture
you want to delete, then select Delete from the popup menu.
Edit Pictures
You can rotate, crop, zoom and adjust the brightness and
color contrast of your .jpg pictures.
1
Tap
to rotate a picture 90 degrees counterclockwise.
2
Tap
to crop a picture by dragging and
selecting the crop area. Tap outside of the box
to stop cropping.
3
Tap
to display the Zoom panel, from which
you can zoom in or out of a picture, or return a
picture to full-screen size.
4
Tap Edit → Brightness and Contrast to adjust
the brightness and contrast levels of a picture.
Tap Edit → Undo to undo an edit.
1
2
3
XV6600WOC User Manual
127
Set Pictures as Background
You can use one of your own .jpg pictures as the background
on the Today screen, and specify how you want it displayed
on the screen, such as adjusting the transparency level.
1
In Pictures, tap the picture you want to set as
the background.
2
Tap Tools → Set as Today Wallpaper.
The default setting for the transparency level of the
background picture is 65%. To change the setting,
tap the option Set as Today Wallpaper.
Customizing Pictures
You can opt to launch the Pictures program automatically
when a digital camera storage card is inserted and decide
on a time delay length between slides when showing a slide
show.
a. To launch automatically when a
storage card is inserted
1
Tap
2
Tap Tools → Options → General.
3
Then check the box next to Detect digital
camera storage cards.
→ Programs → Pictures.
1
Tap
2
Tap Tools → Options → Slide Show.
3
Select a number of seconds, then tap OK.
→ Programs → Pictures.
Companion
Programs
b. To select the time delay between slides
Companion
Programs
128
XV6600WOC User Manual
Appendix : A
Maintaining Your XV6600WOC
Adding or Removing Programs
n Managing Memory
n Backing Up Files
n Resetting your XV6600WOC
and Clearing Memory
Product Regulatory Information
n
n
Appendix A
Maintaining
130
XV6600WOC User Manual
Adding or Removing Programs
Programs added to your device at the factory by default are stored in ROM (read only
memory). You cannot remove them, and you will never accidentally lose them. You can
install any other programs created for your device, as long as your device has enough
memory. The most popular place to find software for your device is on the XV6600WOC
Web site http://www.microsoft.com/mobile/pocketpc.
To add programs using ActiveSync :
You will need to install the appropriate software for your device on your PC before installing it on your device.
1
2
3
4
Download the program to your PC (or insert the CD or disk that contains
the program into your PC). Be sure to select the program designed for the
XV6600WOC and your device process or type.
Read any installation instructions, or documentation that comes with the
program. Many programs provide special installation instructions.
Connect your device and PC.
Double-click the .exe file.
n
If the file is an installer, the installation wizard will begin. Follow the directions
on the screen. Once the software has been installed on your PC, the
installer will automatically transfer the software to your device.
n
If the file is not an installer, you will see an error message stating that the
program is valid but it is designed for a different type of PC. You will need to
move this file to your device. If you cannot find any installation instructions
for the program in the Read Me file or documentation, use ActiveSync
Explore to copy the program file to the Program Files folder on your
device.
Once installation is complete, tap
icon.
→ Programs → and then its program
XV6600WOC User Manual
131
To add a program directly from the
Internet :
1
Determine your device and processor type so
that you know which version of the software to
install.
2
Download the program to your device directly
from the Internet using Pocket Internet
Explorer. You may see a single *.xip, *.exe or
*.zip file, a setup.exe file, or several versions of
files for different device types and processors.
Be sure to select the program designed for the
XV6600WOC and your device processor type.
3
Read any installation instructions, Read Me files,
or documentation that comes with the program.
Many programs provide special installation
instructions.
4
Tap the file, such as a *.xip or *.exe file.
The installation wizard will begin. Follow the
directions on the screen.
To remove a program:
Tap
→ Settings → System → Remove
Programs.
n
You can only remove programs that you
installed in storage memory. Programs that
came with your device cannot be removed.
n
You can quickly return your device to the
factory default configuration by clearing all
memory. All data will be lost. For instructions,
see the details later in this chapter.
Appendix A
Maintaining
Appendix A
Maintaining
132
XV6600WOC User Manual
Managing Memory
Memory on your XV6600WOC is shared between storage memory and program memory.
Storage memory is used to store the information you created and programs you installed.
Program memory is used to run programs on your XV6600WOC. XV6600WOC automatically manages the allocation between storage and program memory.
To view memory allocation and availability:
Tap
→ Settings → System tab →
Memory icon.
Finding Space in Storage memory
In some situations, such as when memory is low, your XV6600WOC may not be able
to automatically adjust the allocation. If you receive a message stating that storage or
program memory is unavailable, try the following solution :
a. Moving data to a SD storage card
1
Tap
2
Tap and hold the file you want to move, and tap Cut. Open the My Documents
folder in the storage card folder, tap Edit, and then tap Paste.
Programs → File Explorer.
Files stored in folders other than My Documents or stored in folders within sub-folders in
My Documents may not show up in the list view of some programs. When using Notes,
Pocket Word, or Pocket Excel, you can also move files by opening the item and tapping
Tools or Edit and then Rename/Move.
XV6600WOC User Manual
133
1
On Inbox → tap Tools → Options.
2
On the Storage tab, select Store attachments
on storage card then tap OK. All existing
attachments are moved to the storage card,
and new attachments are automatically stored
on the storage card.
G
b. Moving e-mail attachments
c. Saving new items on the storage card
Set programs such as Notes, Pocket Word, and Pocket
Excel to automatically save new items on the storage card.
1
In the program → tap Tools → and then
Options.
2
In the Save to field select Storage Card.
d. Deleting unnecessary files
1
Tap
2
Tap and hold the file, and then tap Delete on the
pop up menu.
→ Programs → File Explorer.
and then Find.
To find your largest files, tap
In the Type list, tap Larger than 64 KB, and then
tap Go.
In Internet Explorer, tap Tools and then Options. Tap
Delete Files and Clear History.
Appendix A
Maintaining
e. Deleting all files and clearing history in
Internet Explorer
Appendix A
Maintaining
134
XV6600WOC User Manual
Backing Up Files
Because any new programs or data are stored in RAM, and
therefore will be lost if your device loses power for any reason,
it is critical that you back up files to your computer or a memory card. When you are at your desktop you can synchronize
with your computer to back up files. However, if you are going
outside and unable to access your desktop, you will need to
backup files to an SD or MMC card. Your device enables you to
backup individual files in Word or Excel or all files in XBackup.
Furthermore, you can also backup and then restore Contacts,
Calendar, Internet and E-mail Settings.
SD and MMC Cards
Your device has an expansion slot compatible with a range
of SD and MMC Memory cards, which are primarily used to
backup or transfer files and data.
To insert or remove a memory card:
1
Push the memory card into slot until it clicks into
place. The card is secure when it is not protruding
from the base.
2
To remove the card push it in and then release,
letting the card spring out.
When you receive your device there will be a piece of plastic
in the slot; remove as described in 2 above.
To save Word or Excel files to a
memory card
1
Push the memory card into the slot until it
clicks into place. The card is secure when it is
not protruding from the base.
2
In application programs (e.g. Pocket Word or
Excel), tap Tools → Options.
3
Tap the drop down menu box under Save To and
select Storage Card.
XV6600WOC User Manual
135
1
Tap
→ Programs → xBackup → then the
Backup or Restore tab.
2
If you have inserted the SD card properly it will
appear next to Target by tapping Open and
select Storage Card under the task bar.
3
Make sure there are no application programs
running, then tap Start.
G
Backing up or Restoring Your
System Using xBackup:
Backup or Restore Your System
via ActiveSync
1
Double-click the icon of ActiveSync
task bar of your PC.
2
Select the Backup/Restore option in the dropdown menu of the Tools menu in ActiveSync.
3
Select the Back up tap to backup your system.
if necessary; Select the Restore tab to restore
your system if necessary.
in the
Resetting the XV6600WOC and
Clearing Memory
Appendix A
Maintaining
You can perform a soft reset or a full reset. During a soft
reset, the device is restarted and only some data in open
programs may be lost. However, a full reset turns the battery off and returns the device to its original factory settings
and deletes all programs, files, contacts and other information you have saved to the device. Therefore it is extremely
important to back up data to a storage card or your computer
on a regular basis in the event that a full reset has to be
performed.
Appendix A
Maintaining
136
XV6600WOC User Manual
To perform a soft reset :
If your XV6600WOC responds slowly, stops responding, or
freezes, try a soft reset. A soft reset causes the XV6600WOC
to restart and re-adjust memory allocation. Unsaved data in
open windows may be lost.
Use the stylus to press and hold the Reset button.
To perform a full reset :
A full device reset clears memory, deletes all data and restores
the XV6600WOC to its default settings. Programs installed at
the factory remain, while data you have created and programs
you have installed are all erased.
Press and hold the power button, and then the use
stylus to press the soft reset button at the same
time.
Be sure you have backed up all your data in a SD
card or in your PC before performing a full reset.
Press and
hold the power
button.
XV6600WOC User Manual
For regulatory identification purposes your product is assigned a model number PH20AX.
The following accessories have been approved for use with your device. Their assigned model
numbers listed below can identify these approved accessories. To ensure continued reliable and
safe operation of your XV6600WOC, use only the accessories listed below with your PH20A2.
Accessories
Model Number
Cradle
PH25
Battery Pack
BTR6600
n The above X may be any alphanumeric character or blank
denoting external cosmetic changes.
n This product is intended for use with certified Class 2 Limited
Power Source, rated 5 VDC, minimum 2A power supply unit.
FCC Compliance Statement
n
FCC part 15, part 22 and part 24
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions : (!) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
n FCC ID : NM8 HARRIER
n
Statement according to FCC part 15.105
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Appendix B
Regulatory
Regulatory Agency Identification Numbers
137
Appendix B
Regulatory
138
XV6600WOC User Manual
n
Reorient or relocate the receiving antenna.
n
Increase the separation between the equipment and receiver.
n
Consult the dealer or an experienced radio/TV technician for help.
n
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Important Health and Safety Information
Retain and follow all product safety and operating instructions. Observe all warnings and in the
operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe
the following precautions.
a) General Precautions
n
Heed service markings
Except as explained elsewhere in the Operating or Service documentation, do not service
any product yourself. Service needed on components inside these compartments should be
done by an authorized service technician or provider.
n
Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an authorized service
technician or provider under the following conditions:
l Liquid has been spilled or an object has fallen into the product.
l The product has been exposed to rain or water.
l The product has been dropped or damaged.
l There are noticeable signs of overheating.
l The product does not operate normally when you follow the operating instructions.
n
Avoid hot areas
The product should be placed away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
n
Avoid wet areas
Never use the product in a wet location.
n
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the product. Slots and
openings are provided for ventilation. These openings must not be blocked or covered.
XV6600WOC User Manual
Mounting Accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting
of the product should follow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
n
Avoid unstable mounting
Do not place the product with an unstable base.
n
Use product with approved equipment
This product should be used only with personal computers and options identified as suitable
for use with your equipment.
n
Adjust the volume
Turn down the volume before using headphones or other audio devices.
n
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen.
b) Safety Precautions for Power Supply Unit
n
Use the correct external power source
A product should be operated only from the type of power source indicated on the electrical
ratings label. If you are not sure of the type of power source required, consult your authorized
service provider or local power company. For a product that operates from battery power or
other sources, refer to the operating instructions that are included with the product
n
Handle battery packs carefully
This product contains a Li-ion Polymer battery. There is a risk of fire and burns if the battery
pack is handled improperly. Do not attempt to open or service the battery pack.
Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire
or water, or expose a battery pack to temperatures higher than 60°C (140°F).
Warning: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
RE-PLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT
DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS,
HEAT ABOVE 60℃ (140℉), OR DISPOSE OF IN FIRE OR WATER.
REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE
OF USED BATTERIES ACCORDING TO THE LOCAL RE-GULATIONS
OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.
Appendix B
Regulatory
n
139
Appendix B
Regulatory
140
XV6600WOC User Manual
c) SAR Information
THIS MODEL DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.
Your wireless mobile CDMA phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on the safety standards previously set by both U.S. and international
standards bodies :
n
n
n
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996
n
Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile CDMA phone employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when
used with an accessory that contains no metal and that position the antenna of the CDMA phone a
minimum of 1.5cm from the body. The SAR values of this CDMA phone are 1.3 W/g (body) and 0.122 W/
g (head). Use of other accessories may not ensure compliance with the FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this model device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this model device is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: NM8 HARRIER.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) web-site as http://www.devicefacts.net.
* In the U.S. and Canada, the SAR limit for mobile CDMA phone used by the public is 1.6 Watts/
kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account for any variations in usage.
Normal condition only to ensure the radiative performance and safety of the interference.
As with other mobile radio transmitting equipment, users are advised that for satisfactory
operation of the equipment and for the safety of personnel, it is recommended that no part of
the human body be allowed to come too close to the antenna during operation of the equipment
XV6600WOC User Manual
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six (6")
inches be maintained between a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with the independent
research by and recommendations of Wireless Technology Research.
Persons with pacemakers:
n Should ALWAYS keep the phone more than six inches from their pacemaker when the
phone is turned ON.
n Should not carry the phone in a breast pocket.
n Should use the ear opposite the pacemaker to minimize the potential for interference.
n If you have any reason to suspect that interference is taking place, turn your phone OFF
immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such
interference, you may want to consult your service provider [or call the customer service line to
discuss alternatives.] Optional for each phone manufacturer.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to
determine if they are adequately shielded from external RF energy. Your physician may be able
to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in these areas instruct
you to do so. Hospitals or health care facilities may be using equipment that could be sensitive
to external RF energy.
Driver safety tips:
Your wireless telephone gives you the powerful ability to communicate by voice-almost anywhere,
anytime. But an important responsibility accompanies the benefits of wireless phones, one that
every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless phone behind
the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features such as speed dial and redial. If
available, these features help you to place your call without taking your attention off the road.
Appendix B
Regulatory
TIA Safety information
141
Appendix B
Regulatory
142
XV6600WOC User Manual
2. When available, use a hands free device. If possible, add an additional layer of convenience
and safety to your wireless phone with one of the many hands-free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your wireless phone
without removing your eyes from the road. If you get an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary, suspend the
call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping
through your address book takes attention away from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or
before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make
a call while moving, dial only a few numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting. Make people
you are talking with aware you are driving and suspend conversations that have the potential to
divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the
case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency wireless number. "The wireless industry
reminds you to use your phone safely when driving. " For more information, please call I-888-901
–SAFE, or visit our website www.wow-com.com. Provided by the Cellular Telecommunications &
Internet Association
XV6600WOC User Manual
http://www.fda.gov/cellphones
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using
wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless
phones emit low levels of radiofrequency energy (RF) in the microwave range while being used.
They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF exposures have
not found any biological effects. Some studies have suggested that some biological effects may
occur, but such findings have not been confirmed by additional research. In some cases, other
researchers have had difficulty in reproducing those studies, or in determining the reasons for
inconsistent results.
What is the FDA's role concerning the safety of wireless phones?
Under the law, the FDA does not review the safety of radiation-emitting consumer products
such as wireless phones before they can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the health hazard and to repair, replace,
or recall the phones so that the hazard no longer exists.
Although the existing scientific data does not justify FDA regulatory actions, the FDA has urged
the wireless phone industry to take a number of steps, including the following:
n
Support needed research into possible biological effects of RF of the type emitted by wireless
phones;
n
Design wireless phones in a way that minimizes any RF exposure to the user that is not
necessary for device function; and
n
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health
The FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the federal
level. The following agencies belong to this working group:
n
National Institute for Occupational Safety and Health
n
Environmental Protection Agency
n
Federal Communications Commission
n
Occupational Safety and Health Administration
Appendix B
Regulatory
For More information, please refer to:
143
Appendix B
Regulatory
144
n
XV6600WOC User Manual
National Telecommunications and Information Administration
The National Institute of Health participates in some interagency working group activities, as
well.
The FDA shares regulatory responsibilities for wireless phones with the Federal Communications
Commission (FCC). All phones that are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on FDA and other health agencies for safety
questions about wireless phones.
The FCC also regulates the base stations that the wireless phone networks rely upon. While these
base stations operate at higher power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of times lower than those they can
get from wireless phones. Base stations are thus not the primary subject of the safety questions
discussed in this document.
What kinds of phones are the subject of this update?
The term “wireless phone” refers here to hand-held wireless phones with built-in antennas, often
called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user
to measurable radio frequency energy (RF) because of the short distance between the phone
and the user’s head. These RF exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and other federal health and safety
agencies. When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing distance from
the source. The so-called "cordless phones," which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered from
flaws in their research methods. Animal experiments investigating the effects of radio frequency
energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often
cannot be repeated in other laboratories. A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in laboratory animals. However, many
of the studies that showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer
in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per
day. These conditions are not similar to the conditions under which people use wireless phones,
so we don’t know with certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000. Between them, the
studies investigated any possible association between the use of wireless phones and primary
brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures.
XV6600WOC User Manual
What research is needed to decide whether RF exposure from wireless phones poses a
health risk?
A combination of laboratory studies and epidemiological studies of people actually using wireless
phones would provide some of the data that is needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data
that is directly applicable to human populations, but 10 or more years’ follow-up may be needed
to provide answers about some health effects, such as cancer. This is because the interval
between the time of exposure to a cancer-causing agent and the time tumors develop - if they do
- may be many years. The interpretation of epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is held, or which model of phone is used.
What is the FDA doing to find out more about the possible health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are conducted to
address important questions about the effects of exposure to radio frequency energy (RF).
The FDA has been a leading participant in the World Health Organization International
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The Project
has also helped develop a series of public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on wireless
phone safety. The FDA provides the scientific oversight, obtaining input from experts in
government, industry, and academic organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research developments around the world.
What steps can I take to reduce my exposure to radio frequency energy from my wireless
phone?
If there is a risk from these products--and at this point we do not know that there is-it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
Appendix B
Regulatory
However, none of the studies can answer questions about long-term exposures,
since the average period of phone use in these studies was around three years.
145
Appendix B
Regulatory
146
XV6600WOC User Manual
If you must conduct extended conversations by wireless phone every day, you could place
more distance between your body and the source of the RF, since the exposure level drops
off dramatically with distance. For example, you could use a headset and carry the wireless
phone away from your body or use a wireless phone connected to a remote antenna
Again, the scientific data does not demonstrate that wireless phones are harmful. But if you are
concerned about the RF exposure from these products, you can use measures like those described
above to reduce your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children
and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF),
the measures described above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged
from using wireless phones at all. For example, the government in the United Kingdom distributed
leaflets containing such a recommendation in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it was not based on scientific evidence
that any health hazard exists.
What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic devices.
For this reason, the FDA helped develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers,
and many other groups, was completed in late 2000. This standard will allow manufacturers to
ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.
The FDA has tested hearing aids for interference from handheld wireless phones and helped
develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a “compatible” phone and a
“compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones for possible interactions with other
medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess
the interference, and work to resolve the problem.
XV6600WOC User Manual
Certain agencies in the Federal Government have been involved in monitoring, researching or
regulating issues related to human exposure to RF radiation. These agencies include the Food
and Drug Administration (FDA), the Environmental Protection Agency (EPA), the Occupational
Safety and Health Administration (OSHA), the National Institute for Occupational Safety and
Health (NIOSH), the National Telecommunications and Information Administration (NTIA), and
the Department of Defense (DOD).
By authority of the Radiation Control for Health and Safety Act of 1968, the Center for
Devices and Radiological Health (CDRH) of the FDA develops performance standards for
the emission of radiation from electronic products including X-ray equipment, other medical
devices, television sets, microwave ovens, laser products and sunlamps. The CDRH
established a product performance standard for microwave ovens in 1971 limiting the amount
of RF leakage from ovens. However, the CDRH has not adopted performance standards
for other RF-emitting products. The FDA is, however, the lead federal health agency in
monitoring the latest research developments and advising other agencies with respect to
the safety of RF-emitting products used by the public, such as cellular and PCS phones.
The FDA's microwave oven standard is an emission standard (as opposed to an exposure
standard) that allows specific levels of microwave leakage (measured at five centimeters
from the oven surface). The standard also requires ovens to have two independent interlock
systems that prevent the oven from generating microwaves the moment that the latch
is released or the door of the oven is opened. The FDA has stated that ovens that meet
its standards and are used according to the manufacturer's recommendations are safe
for consumer and industrial use. More information is available from: www.fda.gov/cdrh.
The EPA has, in the past, considered developing federal guidelines for public exposure to RF
radiation. However, EPA activities related to RF safety and health are presently limited to advisory
functions. For example, the EPA now chairs an Inter-agency Radio frequency Working Group,
which coordinates RF health-related activities among the various federal agencies with health or
regulatory responsibilities in this area.
OSHA is responsible for protecting workers from exposure to hazardous chemical and physical agents.
In 1971, OSHA issued a protection guide for exposure of workers to RF radiation [29 CFR 1910.97].
However, this guide was later ruled to be only advisory and not mandatory. Moreover, it was based
on an earlier RF exposure standard that has now been revised. At the present time, OSHA uses the
IEEE and/or FCC exposure guidelines for enforcement purposes under OSHA's "general duty clause"
(for more information see: http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.html)
NIOSH is part of the U.S. Department of Health and Human Services. It conducts research and
investigations into issues related to occupational exposure to chemical and physical agents. NIOSH
has, in the past, undertaken to develop RF exposure guidelines for workers, but final guidelines
were never adopted by the agency. NIOSH conducts safety-related RF studies through its Physical
Appendix B
Regulatory
Which other federal agencies have responsibilities related to potential RF health
effects?
147
Appendix B
Regulatory
148
XV6600WOC User Manual
Agents Effects Branch in Cincinnati,Ohio.
The NTIA is an agency of the U.S. Department of Commerce and is responsible for authorizing
Federal Government use of the RF electromagnetic spectrum. Like the FCC, the NTIA also has
NEPA responsibilities and has considered adopting guidelines for evaluating RF exposure from
U.S. Government transmitters such as radar and military facilities.
The Department of Defense (DOD) has conducted research on the biological effects of RF energy
for a number of years. This research is now conducted primarily at the U.S. Air Force Research
Laboratory located at Brooks Air Force Base, Texas. The DOD Web site for RF biological effects
information is listed with other sites in conjunction with a question on other sources of information,
below.
Who funds and carries out research on the biological effects of RF energy?
Research into possible biological effects of RF energy is carried out in laboratories in the United
States and around the world. In the U.S., most research has been funded by the Department
of Defense, due to the extensive military use of RF equipment such as radar and high-powered
radio transmitters. In addition, some federal agencies responsible for health and safety, such as
the Environmental Protection Agency (EPA) and the U.S. Food and Drug Administration (FDA),
have sponsored and conducted research in this area. At the present time, most of the non-military
research on biological effects of RF energy in the U.S. is being funded by industry organizations.
More research is being carried out overseas, particularly in Europe.
In 1996, the World Health Organization (WHO) established the International EMF Project to
review the scientific literature, and work towards resolution of health concerns over the use of RF
technology. WHO maintains a Web site that provides extensive information on this project and
about RF biological effects and research (www.who.ch/peh-emf).
The FDA, EPA and other US government agencies responsible for public health and safety have
worked together and in connection with WHO to monitor developments and identify research
needs related to RF biological effects.
How does the FCC Audit Cell Phone RF?
After the FCC grants permission for a particular cellular telephone to be marketed, it will occasionally
conduct “post-grant” testing to determine whether production versions of the phone are being
produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that
does not meet the FCC’s regulatory requirements may be required to remove the cell phone from
use and to refund the purchase price or provide a replacement phone, and may be subject to civil
or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, the FDA may
also take regulatory action. The most important post-grant test, from a consumer’s perspective,
is testing of the RF emissions of the phone. The FCC measures the Specific Absorption Rate
(SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific
measurement, there is a possibility that the test measurement may be less than or greater than
the actual RF emitted by the phone. This difference between the RF test measurement and actual
RF emission is because test measurements are limited by instrument accuracy, because test
measurement and actual use environments are different, and other variable factors. This inherent
XV6600WOC User Manual
149
variability is known as “measurement uncertainty.” When the FCC conducts post-grant testing of
a cell phone, it takes into account any measurement uncertainty to determine whether regulatory
action is appropriate. This approach ensures that when the FCC takes regulatory action, it will
have a sound, defensible scientific basis.
The FDA will continue to monitor studies and literature reports concerning acute effects of cell
phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that
is, the risks from using a cell phone for many years). If new information leads the FDA to believe
that a change to the FCC’s measurement policy may be appropriate, the FDA will contact the
FCC, and both agencies will work together to develop a mutually-acceptable approach.
Hardware
Specifications
The FDA scientific staff reviewed the methodology used by the FCC to measure cell phone RF,
and agreed it is an acceptable approach, given our current understanding of the risks presented
by cellular phone RF emissions. RF emissions from cellular phones have not been shown to
present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC
(an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted
by current measurement standards was added to the maximum permissible SAR, the resulting
SAR value would be well below any level known to produce an acute effect. Consequently, the
FCC’s approach with measurement uncertainty will not result in consumers being exposed to
any known risk from the RF emitted by cellular telephones.
150
XV6600WOC User Manual
Specifications
Hardware
Specifications
System Information
Processor
Intel PXA 263 CPU at 400MHz / Qualcomm MSM5500
Memory
- ROM : 64MB
- RAM : 128MB
Operating System
Windows MobileTM software
Display
Type
TFT-LCD 16bit, touch-sensitive, 3.5 inches
Resolution
240 x 320 at 64K colors
CDMA Module (Dual Band)
PCS
1900MHZ
Celluar
800MHZ
!xRTT/1xEV-DO
Audio
Audio controller
AGC
Microphone/Speaker
Built-in
Headphone
WAV/WMA/MP3 stereo
Physical
Dimensions (typical)
69.8mm (w) x 125mm (h) x 18.7mm (l)
Weight (typical)
210g
Expansion Slots
SDIO/MMC supports
Yes
XV6600WOC User Manual
151
Controls and Lights
- 5-way navigation pad
Buttons
- 8 program buttons : Calendar, Contacts, Start, Inbox,
menu, Done/OK, Windows Media and Record.
- 2 phone function : Send (Yes) & End (No)
- Volume control button (up, down)
- Power on / off
- Reset switch
Keyboard
- Built-in 39 keys extractable QWERTY keyboard
LED Lights
- Event notification
- Charge status
- CDMA signals
Connection
Infrared
SIR
I/O port
22 pin individual port for signals (for USB slave, Serial, and
power)
Audio
Stereo headphone jack (2.5Ø)
Bluetooth
1.1 compliant
Power Supply
Battery
- Main : 1490mAh Removable, rechargeable Li-ion Polymer
battery, data retention time : 72 hrs
- Backup : 20mAh rechargeable,
Data retention time : 20 mins. (in full charge)
Battery life:150hrs of PDA only (without RF) [TBD]
-Talktime: 3~4hrs (at normal RF Tx power level)
- Standby: 168hrs
AC adapter
- AC input / Frequency :100 ~ 240 VAC / 50 ~ 60Hz
Hardware
Specifications
Navigation
Trouble
shooting
152
XV6600WOC User Manual
Troubleshooting
If you encounter any problems with your XV6600WOC, consult the following Trouble
Guide. If you are still having problems after reviewing these, contact Technical Support
or your dealer.
Operating Problems
Problem
Solution
n
My XV6600WOC
turning itself off.
n
My XV6600WOC is not
making any sound.
1
My XV6600WOC does not
vibrate when the phone rings
or alarms occur.
1
n
keeps
Your XV6600WOC is designed by default to turn itself off
if not used for 3 minutes. This period can be set up to 5
minutes. Check the auto-off function on the Advanced
tab on Power setting in Chapter 5.
2
2
3
Tap
at the right side of the title bar to check the
volume status.
Check the settings of Sound and Notifications on
the Personal tab by tapping
→ Settings.
Tap
at the right side of the title bar to check if the
vibrate function is activate.
Check the setting of Sound and Notifications on
the Personal tab by tapping
→ Settings.
Check the event note in your Calendar to see if the
Reminder has been activated.
n
Screen freezes or no response
Reset your device. See Resetting your XV6600WOC
and Clearing memory section in this Appendix.
n
Screen is blank.
If your XV6600WOC does not respond when you briefly
press the Power button, press and hold the button for a
full second. If that does not work :
1 Plug the AC power into the device to charge it.
2 Reset the device. See Resetting your XV6600WOC
and Clearing memory section in this Appendix.
XV6600WOC User Manual
Problem
n
Screen is dark.
153
Solution
1
2
Check the Brightness setting by tapping
→
Settings → System tab → Backlight → Brightness
tab.
Prolonged exposure to direct sunlight may also
cause your XV6600WOC screen to temporarily
darken. This is normal for LCD screens and is not
permanent.
A warning message about
Running out of memory
pops up on the screen.
Memory on your XV6600WOC is shared between
storage memory and program memory :
1 Delete any unnecessary information you have
entered to release storage memory space.
2 Delete the unnecessary programs you have installed
to release program memory space.
See the Managing Memory section in this Appendix.
n
A warning message about
"Battery low" pops up on the
screen.
Plug the AC power in to your device to charge it.
n
Screen is hard to read, or
the text on the screen is too
small for you.
If you are having a hard time viewing a document in
Notes, try changing the size of the view. Just tap a zoom
percentage on the Tools menu.
1 In Pocket Word and Pocket Excel, on the
View menu, tap Zoom and then select a zoom
percentage.
2 In Pocket Internet Explorer, on the View menu, tap
Text Size and then select a size.
3 In Pocket Outlook data, try enlarging the display
font. To do this within Calendar, Tasks or Contacts,
tap Tools, then Options, and then select Use large
font.
Trouble
shooting
n
Trouble
shooting
154
XV6600WOC User Manual
Tapping and Writing Problems
Problem
Solution
n
Device buttons do not respond or bring up the wrong
program.
Check the Buttons setting to see if the program
assignment for each function button is set as you want.
Tap
→ Settings → Personal tab → Buttons.
For detailed information about Button settings, see
Chapter 5.
n
Inaccurate response to stylus
taps.
Adjust the touch screen to respond more accurately to
screen taps. Tap
→ Settings → System tab →
Screen → Align Screen.
n
XV6600WOC does not
recog-nize handwriting.
For your XV6600WOC to recognize your handwriting
input with the stylus, you need to use Transcriber writing.
To learn how to write in Transcriber, see Chapter 2.
ActiveSync Problems
Solution
Problem
n
ActiveSync operation cannot
be performed or connected.
1
2
3
4
5
Make sure the ActiveSync cradle/cable is connected
securely.
Make sure you have installed the ActiveSync
software included on the XV6600WOC 2003
companion CD.
Make sure you selected Local USB or Local Serial,
as appropriate, from the Connection Settings on
the ActiveSync Manager menu on your desktop
computer.
If you are using the optional serial cradle/cable, make
sure you are not running another program which also
works with the serial port you selected when installed.
If ActiveSync still doesn't work, remove the ActiveSync
software from your desktop computer, then re-install
it.
XV6600WOC User Manual
Problem
n
ActiveSync is connected, but
data or information cannot
be transferred.
155
Solution
On your desktop computer, check the Sync Options on
the ActiveSync Manager menu to see if the information
type for the program you want has been selected for
synchronizing. See more detail s about synchronizing
information in Chapter 4.
Connection Problems
Solution
Problem
Unable to use Infrared (IR)
to transfer information.
n
Cannot connect to Internet,
web surfing doesn't work.
Try the following:
1 Line up the IR ports so that they are unobstructed
and within a close range with 20cm.
2 Make sure nothing is between the two IR ports.
3 Adjust the room lighting. Some types of light interfere
with IR connections. Try moving to a different location
or turning off some lights.
Try the following :
Check that you have set up and connected to an
Internet service provider.
2 Check that your wireless connection to your mobile
service provider is switched on and the signal is unobstructed.
3 Verify with your Internet service provider that your
user name and password are correct.
See Chapter 7 Getting Connected. Additional
information is also available in Connections Help on
the XV6600WOC and ActiveSync Help on the PC.
1
Trouble
shooting
n
Trouble
shooting
156
XV6600WOC User Manual
Problem
n
Problems in cable and
cradle connection.
Solution
1
2
3
4
Ensure your XV6600WOC is turned on.
Ensure that you do not have any other active
connections. Tap
→ Today, and then tap
or
at the bottom of the screen and then
Disconnect.
Ensure the cable is securely plugged into the COM
port on the back of your PC. Use the cable that came
with the XV6600WOC without any extra cables or
extenders attached.
Plug the other end of the cable securely into the
correct port on your XV6600WOC. If you are using
a cradle, push your XV6600WOC securely into the
cradle.
XV6600WOC User Manual
157
Index
A
About 63
About Your Phone 34
Accessories 14
ActiveSync 52,130
ActiveSync Errors 55
AC Adapter Converter 15
Adding programs 130
Add ring tone 66
Album 23,110
Album settings 112
Annotation 111
B
Background 127
Backing Up Files 134
Backlight 63
Backup 135
Back side panel 11
Battery 12
Beam 72
Block recognizer 26
Bluetooth 85
Bluetooth Manager 91
Bottom side panel 11
Buttons 60
Calculator 23
Calendar 22,70
Calibration 18
Call History 41, 45
Cellular line 80
Certificates 59
Clear memory 135
Clock 59, 64
Command bar 21
D
Data retention 12
Device information 59
Device Settings 58
Dialer screen 34
Drawing on the Screen 30
E
E-mail 100, 112
E-mail attachments 133
E-mail service 100
Earphone microphone 10
Editing text 27
Emergency call 46
Entering Information 24
Entering information 27,119
Entering Your PIN 47
F
FCC compliance 137
Find 32,74
Front side panel 10
Full reset 136
G
Games 23
General precautions 5
H
Health and safety information
138
I
In-Call Options 42
inbox 22,100
indicators 20,35
infrared connection 54
infrared port 10
Input 58
input 66,60
input panel 24
Installing ActiveSync 50
K
Keypad lock 46
Keypad tone 67
Knowing Your Device 10
L
LED 11
Left side panel 10
Letter recognizer 26
Locking the keypad 46
Locking your phone 47
M
Making a Call 38
Making a Note 43
Managing Memory 132
Media Player 124
Memory 59, 64, 132
Index
C
Conference call 42
Connections 80
Connect to the Internet 80
Contacts 22, 72,
Contacts Information 44
Converting writing 29
158
XV6600WOC User Manual
Memory card 132
Menus 58, 61
Messages 104
MSN 105
MSN Messenger 23,105
N
Navigation Bar and Command
Bar 21
Navigation pad 10,36
Notes 22, 77
Notification LED 11
O
Owner Information 58, 61
Index
P
Password 58, 61
Permanent Save 59, 65
Personal 58
Phone 22,34, 58
Phone lock 47
phone security 46
Phone Settings 66
Phone Volume 38
Pictures 23, 125
Pocket Excel 23, 122
pocket IE 22, 82
Pocket Word 23, 119
Pop-Up Menus 22
Power 59, 65
Programs 22
Punctuate in transcriber 27
R
Re-calibration 18
Receiving e-mail 101
Recharge 13
Recording a Message 31
Regional settings 59
Remove programs 59, 131
Reset the Pocket PC Phone and
Clear Memory 135
Right side panel 11
Ring tone 66, 112
Ring type 66
S
Safety precautions 5
SAR information 140
Screen 59
SD and MMC Cards 134
Secure Your Phone 46
Services 68
Set up a WAP gateway 81
SMS 52,104
SMS Messages 104
Soft keyboard 25
Soft reset 136
Sounds and Notifications 58, 62
Speakerphone Mode 44
specifications 150
Speed Dial 40
Starting Up 18
Stereo headset 15
Storage card 132
Synchronizing calendar 52
Synchronizing contacts 53
Synchronizing inbox 52
Synchronizing information 52
Synchronizing tasks 53
Synchronizing Using an Infrared
Connection 54
T
Tasks 22, 75
Terminal Services Client 83
The Navigation Pad and Dialing
36
Today 58, 62
Today Screen 19
Today wallpaper 116
Top side panel 10
Transcriber 26
Troubleshooting 152
Turning phone on and off 37
U
USB Cradle 14
USB Sync cable 15
Using ActiveSync 50
Using the Input Panel 24
V
Vibrate mode 38
Voice mail 44
W
Windows Media 23, 124
Writing on the Screen 28
X
xBackup 23, 135