Avaya 32-MB User's Manual


Add to my manuals
22 Pages

advertisement

Avaya 32-MB User's Manual | Manualzz

Installing the ARE 32-MB

Memory Upgrade Kit

Part No. 112831 Rev. B

April 1996

4401 Great America Parkway

Santa Clara, CA 95054

8 Federal Street

Billerica, MA 01821

Copyright © 1988–1996 Bay Networks, Inc.

All rights reserved. Printed in the USA. April 1996.

The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Bay Networks, Inc.

The software described in this document is furnished under a license agreement and may only be used in accordance with the terms of that license. A summary of the Software License is included in this document.

Restricted Rights Legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph

(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.

Notice for All Other Executive Agencies

Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in the Commercial

Computer Software-Restricted Rights clause at FAR 52.227-19.

Trademarks of Bay Networks, Inc.

ACE, AFN, BCN, BLN, BN, CN, FRE, LN, Optivity, SynOptics, SynOptics Communications, Wellfleet and the Wellfleet logo are registered trademarks and AN, ANH, ASN, BaySIS, BayStack, BCNX, BLNX, BNX, EZ Internetwork, EZ LAN,

FN, PathMan, PhonePlus, PPX, Quick2Config, RouterMan, SPEX, Bay Networks, Bay Networks Press, the Bay Networks logo and the SynOptics logo are trademarks of Bay Networks, Inc.

Third-Party Trademarks

All other trademarks and registered trademarks are the property of their respective owners.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, Bay Networks, Inc. reserves the right to make changes to the products described in this document without notice.

Bay Networks, Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Portions of the code in this software product are Copyright © 1988, Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that such portions of the software were developed by the

University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from such portions of the software without specific prior written permission.

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third parties).

Electromagnetic Emissions

Meets requirements of:

FCC Part 15, Class A

EN 55 022 (CISPR 22:1985), Class A and Class B

VCCI Class 1 ITE

Canada Requirements Only

Canada CS-03 Rules and Regulations

Note: The Canadian Department of Communications label identifies certified equipment. The certification means that the equipment meets certain telecommunications network protective operations and safety requirements. The

Department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent the degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

Canada CS-03 — Règles et règlements

Note: L’étiquette du ministère des Communications du Canada indique que l’appareillage est certifié, c’est-à-dire qu’il respecte certaines exigences de sécurité et de fonctionnement visant les réseaux de télécommunications.Le ministère ne garantit pas que l’appareillage fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer l’appareillage, s’assurer qu’il peut être branché aux installations du service de télécommunications local. L’appareillage doit aussi être raccordé selon des méthodes acceptées. Dans certains cas, le câblage interne du service de télécommunications utilisé pour une ligne individuelle peut être allongé au moyen d’un connecteur certifié

(prolongateur téléphonique). Le client doit toutefois prendre note qu’une telle installation n’assure pas un service parfait en tout temps.

Les réparations de l’appareillage certifié devraient être confiées à un service d’entretien canadien désigné par le fournisseur. En cas de réparation ou de modification effectuées par l’utilisateur ou de mauvais fonctionnement de l’appareillage, le service de télécommunications peut demander le débranchment de l’appareillage.

Pour leur propre sécurité, les utilisateurs devraient s’assurer que les mises à la terre des lignes de distribution d’électricité, des lignes téléphoniques et de la tuyauterie métallique interne sont raccordées ensemble. Cette mesure de sécurité est particulièrement importante en milieu rural.

Attention: Les utilisateurs ne doivent pas procéder à ces raccordements eux-mêmes mais doivent plutôt faire appel aux pouvoirs de réglementation en cause ou à un électricien, selon le cas.

Bay Networks, Inc.

4401 Great America Parkway, Santa Clara, CA 95054

8 Federal Street, Billerica, MA 01821

Canada Requirements Only

(continued)

D. O. C. Explanatory Notes: Equipment Attachment Limitations

The Canadian Department of Communications label identifies certified equipment. This certification meets certain telecommunication network protective, operational and safety requirements. The department does not guarantee the equipment will operate to the users satisfaction.

Before installing the equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company’s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above condition may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.

Notes explicatives du ministère des Communications: limites visant les accessoires

L’étiquette du ministère des Communications du Canada indique que l’appareillage est certifié, c’est-à-dire qu’il respecte certaines exigences de sécurité et de fonctionnement visant les réseaux de télécommunications. Le ministère ne garantit pas que l’appareillage fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer l’appareillage, s’assurer qu’il peut être branché aux installations du service de télécommunications local. L’appareillage doit aussi être raccordé selon des méthodes acceptées. Dans certains cas, le câblage interne du service de télécommunications utilisé pour une ligne individuelle peut être allongé au moyen d’un connecteur certifié

(prolongateur téléphonique). Le client doit toutefois prendre note qu’une telle installation n’assure pas un service parfait en tout temps.

Les réparations de l’appareillage certifié devraient être confiées à un service d’entretien canadien désigné par le fournisseur. En cas de réparation ou de modification effectuées par l’utilisateur ou de mauvais fonctionnement de l’appareillage, le service de télécommunications peut demander le débranchment de l’appareillage.

Pour leur propre sécurité, les utilisateurs devraient s’assurer que les mises à la terre des lignes de distribution d’électricité, des lignes téléphoniques et de la tuyauterie métallique interne sont raccordées ensemble. Cette mesure de sécurité est particulièrement importante en milieu rural.

Attention: Les utilisateurs ne doivent pas procéder à ces raccordements eux-mêmes mais doivent plutôt faire appel aux pouvoirs de réglementation en cause ou à un électricien, selon le cas.

Bay Networks, Inc.

4401 Great America Parkway, Santa Clara, CA 95054

8 Federal Street, Billerica, MA 01821

Canada Requirements Only

(continued)

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (Access Feeder Node, Access Link Node, Access Node, Access Stack Node, Backbone

Concentrator Node, Backbone Concentrator Node Switch, Backbone Link Node, Backbone Link Node Switch,

Concentrator Node, Feeder Node, Link Node) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Réglement sur le brouillage radioélectrique du ministère des Communications

Cet appareil numérique (Access Feeder Node, Access Link Node, Access Node, Access Stack Node, Backbone

Concentrator Node, Backbone Concentrator Node Switch, Backbone Link Node, Backbone Link Node Switch,

Concentrator Node, Feeder Node, Link Node) respecte les limites de bruits radioélectriques visant les appareils numériques de classe A prescrites dans le Réglement sur le brouillage radioélectrique du ministère des

Communications du Canada.

Bay Networks, Inc.

4401 Great America Parkway, Santa Clara, CA 95054

8 Federal Street, Billerica, MA 01821

Bay Networks Software License

Note: This is Bay Networks basic license document. In the absence of a software license agreement specifying varying terms, this license — or the license included with the particular product — shall govern licensee’s use of

Bay Networks software.

This Software License shall govern the licensing of all software provided to licensee by Bay Networks (“Software”).

Bay Networks will provide licensee with Software in machine-readable form and related documentation

(“Documentation”). The Software provided under this license is proprietary to Bay Networks and to third parties from whom Bay Networks has acquired license rights. Bay Networks will not grant any Software license whatsoever, either explicitly or implicitly, except by acceptance of an order for either Software or for a Bay Networks product

(“Equipment”) that is packaged with Software. Each such license is subject to the following restrictions:

1.

Upon delivery of the Software, Bay Networks grants to licensee a personal, nontransferable, nonexclusive license to use the Software with the Equipment with which or for which it was originally acquired, including use at any of licensee’s facilities to which the Equipment may be transferred, for the useful life of the Equipment unless earlier terminated by default or cancellation. Use of the Software shall be limited to such Equipment and to such facility. Software which is licensed for use on hardware not offered by Bay Networks is not subject to restricted use on any Equipment, however, unless otherwise specified on the Documentation, each licensed copy of such

Software may only be installed on one hardware item at any time.

2.

Licensee may use the Software with backup Equipment only if the Equipment with which or for which it was acquired is inoperative.

3.

Licensee may make a single copy of the Software (but not firmware) for safekeeping (archives) or backup purposes.

4.

Licensee may modify Software (but not firmware), or combine it with other software, subject to the provision that those portions of the resulting software which incorporate Software are subject to the restrictions of this license. Licensee shall not make the resulting software available for use by any third party.

5.

Neither title nor ownership to Software passes to licensee.

6.

Licensee shall not provide, or otherwise make available, any Software, in whole or in part, in any form, to any third party. Third parties do not include consultants, subcontractors, or agents of licensee who have licensee’s permission to use the Software at licensee’s facility, and who have agreed in writing to use the Software only in accordance with the restrictions of this license.

7.

Third-party owners from whom Bay Networks has acquired license rights to software that is incorporated into

Bay Networks products shall have the right to enforce the provisions of this license against licensee.

8.

Licensee shall not remove or obscure any copyright, patent, trademark, trade secret, or similar intellectual property or restricted rights notice within or affixed to any Software and shall reproduce and affix such notice on any backup copy of Software or copies of software resulting from modification or combination performed by licensee as permitted by this license.

Bay Networks, Inc.

4401 Great America Parkway, Santa Clara, CA 95054

8 Federal Street, Billerica, MA 01821

Bay Networks Software License

(continued)

9.

Licensee shall not reverse assemble, reverse compile, or in any way reverse engineer the Software. [Note: For licensees in the European Community, the Software Directive dated 14 May 1991 (as may be amended from time to time) shall apply for interoperability purposes. Licensee must notify Bay Networks in writing of any such intended examination of the Software and Bay Networks may provide review and assistance.]

10. Notwithstanding any foregoing terms to the contrary, if licensee licenses the Bay Networks product “Site

Manager,” licensee may duplicate and install the Site Manager product as specified in the Documentation. This right is granted solely as necessary for use of Site Manager on hardware installed with licensee’s network.

11. This license will automatically terminate upon improper handling of Software, such as by disclosure, or Bay

Networks may terminate this license by written notice to licensee if licensee fails to comply with any of the material provisions of this license and fails to cure such failure within thirty (30) days after the receipt of written notice from Bay Networks. Upon termination of this license, licensee shall discontinue all use of the Software and return the Software and Documentation, including all copies, to Bay Networks.

12. Licensee’s obligations under this license shall survive expiration or termination of this license.

Bay Networks, Inc.

4401 Great America Parkway, Santa Clara, CA 95054

8 Federal Street, Billerica, MA 01821

Contents

Installing the ARE 32-MB Memory Upgrade Modules

Required Tools ................................................................................................................... 1

Shipment Contents ............................................................................................................ 2

How to Get Help ................................................................................................................ 2

Removing the VBM Module ............................................................................................... 3

Installing the VBM Module ................................................................................................. 4

Removing SIMMs from the ARE Processor Module .......................................................... 6

Installing the Memory Upgrade SIMMs ............................................................................. 7

ix

Figures

Figure 1.

Figure 2.

Figure 3.

Figure 4.

Figure 5.

Removing the Mounting Screws ................................................................. 4

Aligning the VBM Module ............................................................................ 5

Locating the SIMM Sockets ........................................................................ 6

Inserting a SIMM into a Socket ................................................................... 7

Locking a SIMM in Place ............................................................................ 8

xi

Tables

Table 1.

Shipment Contents ..................................................................................... 2

xiii

Installing the ARE 32-MB

Memory Upgrade Modules

This document describes how to install the 32-MB memory upgrade modules on an ATM Routing Engine (ARE) processor module. The memory upgrade is supported by Router Software Version 9.01 and later. To install the memory upgrade modules, you must

• Remove the existing Virtual Buffer Memory (VBM) module, if one is installed

• Install the new VBM module

• Remove the existing Single Inline Memory Modules (SIMMs)

• Install the new SIMMs

This document describes each of these tasks.

Required Tools

You need the following tools to install the memory upgrade modules:

• Phillips screwdriver

• Antistatic wrist strap, which comes with the upgrade kit

1

Installing the ARE 32-MB Memory Upgrade Kit

Shipment Contents

Table 1

lists the contents of the 32-MB memory upgrade kit (Order No.

AG1311008). If any parts are damaged or missing, contact the Bay Networks

Technical Response Center in your area.

Table 1.

Shipment Contents

Item

Virtual Buffer Memory (VBM) module

Single Inline Memory Modules (SIMMs)

Phillips screws

Antistatic wrist strap

Quantity

4

1

1

2

How to Get Help

For additional information or advice, contact the Bay Networks Technical

Response Center in your area:

United States

Valbonne, France

Sydney, Australia

Tokyo, Japan

1-800-2LAN-WAN

(33) 92-966-968

(61) 2-903-5800

(81) 3-328-005

2

Installing the ARE 32-MB Memory Upgrade Modules

Removing the VBM Module

If you are upgrading your ARE processor module from 16 MB to 32 MB, you must first remove the existing VBM module, before you can install the new one.

If you are upgrading from 8 MB to 32 MB, there is no VMB module to remove. In this case, proceed to the next section, “Installing the VBM Module.”

To remove the existing VBM module, you must first remove the ARE processor module from the router. Refer to Installing and Maintaining BN Routers and use the same instructions as for replacing a FRE

®

/FRE-2 module.

When you remove the ARE processor module from the router, be sure to place it on a clean, nonconductive surface.

Caution: Electrostatic discharge can damage hardware. You must wear an antistatic wrist strap whenever you remove, install, or handle electronic components. For additional information on how to use an antistatic wrist strap, refer to Installing and Maintaining BN Routers .

To remove the VBM module:

1.

Remove the Phillips screws from each of the four mounting holes in the

VBM module (Figure 1) .

3

Installing the ARE 32-MB Memory Upgrade Kit

Phillips screws

Phillips screws

A320001A.eps

Figure 1.

Removing the Mounting Screws

2.

3.

Grasp the VBM module by the edges and lift it to remove it from the ARE processor module.

Store the VBM module in an antistatic bag.

Follow the steps in the next section to install the new VBM module.

Installing the VBM Module

If you have not already done so, remove the ARE processor module from the router. Refer to Installing and Maintaining BN Routers and use the same instructions as for replacing a FRE/FRE-2 module.

When you remove the ARE processor module from the router, be sure to place it on a clean, nonconductive surface.

Caution: Electrostatic discharge can damage hardware. You must wear an antistatic wrist strap whenever you remove, install, or handle electronic components. For additional information on how to use an antistatic wrist strap, refer to Installing and Maintaining BN Routers .

4

Installing the ARE 32-MB Memory Upgrade Modules

To install the VBM module:

1.

Align the two connectors on the VBM module with the connectors on the

ARE processor module

(Figure 2)

. Also, align the mounting holes on the

VBM module with the standoffs on the ARE processor module. Then press the upgrade module into place.

Mounting holes

Mounting holes

4 standoffs

Connectors

A320003A

Figure 2.

Aligning the VBM Module

2.

3.

In each of the four mounting holes on the VBM module, insert a Phillips screw. Use a Phillips screwdriver to tighten each screw.

Follow the steps in the next section to remove existing SIMMs so that you can install the memory upgrade SIMMs.

5

Installing the ARE 32-MB Memory Upgrade Kit

Removing SIMMs from the ARE Processor Module

1.

Using

Figure 3 as a reference, locate SIMM sockets U7 and U14 on your

ARE processor module.

There will be a SIMM in each of these sockets.

U7

U14

Figure 3.

Locating the SIMM Sockets

2.

To remove the SIMMs currently populating sockets U7 and U14: a.

b.

Pull back on the retainers grasping the edges of the SIMM to release it.

Gently lift up and pull out the SIMM.

6

Installing the ARE 32-MB Memory Upgrade Modules

Installing the Memory Upgrade SIMMs

This procedure assumes you have already removed the SIMMs from the appropriate sockets as described in the previous section.

Your upgrade kit contains two identical SIMMs. To install them:

1.

Grasp one of the SIMM by the edges, and turn it so the notch at the center of the SIMM faces the center of socket U7

(Figure 4) .

Notch

Figure 4.

Inserting a SIMM into a Socket

2.

3.

Insert the SIMM into the socket at an angle of about 30 degrees from the vertical.

Gently push down on the module so that the retainers grasp the SIMM, locking it into place

(Figure 5)

.

7

Installing the ARE 32-MB Memory Upgrade Kit

When the SIMM is properly inserted, the two tiny vertical black poles on the

SIMM socket should line up with the two holes in the SIMM.

Retainer

Black poles on socket must line up with holes in SIMM

Figure 5.

A320009A

Locking a SIMM in Place

4.

5.

Repeat Steps 1 through 3 to install the other SIMM in socket U14.

Install the ARE processor module in the BN

®

.

Again, refer to Installing and Maintaining BN Routers and use the same instructions as for replacing a FRE/FRE-2 module.

8

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Languages