Avaya IP Telephone Power Adapter Installation Guide

The enclosed device is used to allow the Avaya™ IP 4620 and

IP 4602SW Telephones to be recognized and powered by

Catalyst® power blades.

INSTALLATION:

Proper installation is necessary to ensure the unit operates correctly.

1. Set the switch on the bottom of the IPTPA as follows:

Catalyst® 6509 Catalyst® 4006

IP 4602, IP 4602SW 1 3

IP 4620 1 2

2. Attach an RJ45-8 CAT 5 compliant cord (supplied with the

IP 4600 Telephone) from the wall jack to the IP Telephone

Power Adapter at the “LINE” side.

3. Attach the RJ45-8 CAT 5 compliant pigtail on the IP

Telephone Power Adapter to the telephone line input jack.

NOTE:

Catalyst® is a registered trademark of Cisco Systems, Inc.

CAUTION:

This unit is not repairable.

Do not attempt to open or service this device.

Installation Guide for the

Avaya™ IP Telephone Power Adapter

Comcode 700276611

August 2003

Figure 1 – Adapter Switch