PREAMP/BOOSTER PB100

Preamplifier/Volume Booster

Thank you for showing your confidence in us by purchasing the BEHRINGER PREAMP BOOSTER PB100.

This high-quality effects pedal can be used to boost the volume and shape the sound of any instrument.

Thanks to its high-performance features you will be able to match Piezo pickups to regular amp inputs or boost volume while playing solo parts.

1. Controls

(1)

(3)

(4)

(2)

(7) (6)

(5)

(1)

The BASS control allows you to adjust the low-frequency range of the signal.

(2)

The TREBLE control allows you to adjust the high-frequency range of the signal.

(3)

The GAIN control adjusts the amount of preamplification.

(4)

The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.

(5)

Use the footswitch to activate/deactivate the effect.

(6)

Use this 1/4" TS IN connector to plug in the instrument cable.

(7)

The 1/4" TS OUT connector sends the signal to your amp.

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.

◊

The PB100 has no on/off switch. As soon as you insert the jack into the in connector, the PB100 begins running. When not using the PB100, remove the jack from the in connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

In

Connector

Impedance

1/4" TS

500 kΩ

Out

Connector

Impedance

Power Supply

BEHRINGER PSU-SB

PSU-SB-CN

BEHRINGER

PSU-SB-EU

BEHRINGER

PSU-SB-JP

BEHRINGER

PSU-SB-SAA

BEHRINGER

PSU-SB-UK

BEHRINGER

PSU-SB-UL

BEHRINGER

1/4" TS

1 kΩ

9 V 𝌂, 100 mA regulated

220 VAC adaptor China

230 VAC adaptor Europe

100 VAC adaptor Japan

240 VAC adaptor Australia

240 VAC adaptor UK

115 VAC adaptor USA

PREAMP/BOOSTER PB100

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specifications

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Physical/Weight

Dimensions

(H x W x D)

Weight approx. 2 1/8 x 2 3/4 x 4 4/5" approx. 54 x 70 x 123 mm approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS

WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,

Tortola, British Virgin Islands