Belkin F5U602EA User manual


Add to my manuals
84 Pages

advertisement

Belkin F5U602EA User manual | Manualzz

FireWire 800 and USB 2.0

PCI Express ™ Card

Add FireWire ® 800 and Hi-Speed USB 2.0 ports to your computer using PCI Express technology

User Manual

P74967ea_F5U602ea.indb 1

FR

DE

NL

ES

IT

F5U602ea

14/3/06 4:36:23 pm

Table of Contents

1. Introduction ...................................................................... 1

Features ........................................................................ 2

Specifications ................................................................ 2

Environment .................................................................. 2

Minimum System Requirements ................................... 3

Package Contents ......................................................... 3

2. Software Setup ................................................................. 4

3. Hardware Installation ...................................................... 6

4. Verifying Proper Installation ........................................... 8

5. Information .................................................................... 10

P74967ea_F5U602ea.indb 2 14/3/06 4:36:24 pm

1

Introduction

Introduction to PCI Express

For the last 10 years, PCI has been the mainstream interface for personal PCs, with nearly every computer using the same PCI bus specification—32-bit, running at 33MHz, and yielding a maximum data-transfer rate of only 133.3Mbps.

In today’s information age, with data size growing exponentially, there is increased demand for faster transfer rates. This demand led to Intel’s development of the PCI

Express standard, which offers increased speed and stability for data transfers.

Common PCI Express bus forms include x1, x2, x4, x8, and x16, with each form being characterized by a unique slot design. A one-path transmission on a one-lane (x1) PCI

Express bus can reach speeds of up to 250MB—nearly double the standard PCI transmission speed. A 16-lane (x16)

PCI Express bus can reach speeds of up to 16Gbps.

1

2

3

4

5

EN

P74967ea_F5U602ea.indb 1

1

14/3/06 4:36:24 pm

1

2

3

4

5

Introduction

Features

• Complies with one-lane 2.5Gbps PCI Express specifications

• Offers USB 2.0 transfer rate of up to 480Mbps and 1394b data transfer rate of up to 800Mbps

Specifications

• Interface: One-lane PCI Express

• Mode: USB2.0/1394b Combo PCI Express Card

• Controller: NEC UPD720101+ TI TSB82AA2+ TI XIO2000

• Channels: 2 external USB 2.0 ports and 1 internal port 2 external 1394b ports and 1 internal port

Environment

• Operation Temperature: 0° C ~ 57° C

• Storage Temperature: -20° C ~ 85° C

• Operation Temperature: 5 ~ 95% RH

P74967ea_F5U602ea.indb 2

2

14/3/06 4:36:24 pm

3

Introduction

Minimum System Requirements

• Windows ® -based computer with available PCI Express slot*

• Windows 2000, XP, 2003 Server

* Note: Enclosed Card will not fit into a standard PCI slot.

Package Contents

• FireWire 800 and USB 2.0 PCI Express Card

• User Manual

• CD Driver

1

2

3

4

5

EN

2

P74967ea_F5U602ea.indb 3

3

14/3/06 4:36:25 pm

1

2

3

4

5

Software Setup

IMPORTANT NOTE: You must install the FireWire 800 and

USB 2.0 PCI Express Card drivers prior to installing the hardware in your computer.

1. Insert the FireWire 800 and USB 2.0 PCIe installation CD into your CD-ROM drive. After a few moments, the main menu will automatically start.

NOTE: If the main CD does not auto-start, click the

“Start” button and select “Run”. From the “Run” dialogue box, enter “<driver>:\setup.exe” and click “OK” (where

“<driver>” represents the letter that identifies your CD-

ROM drive under “My Computer”—e.g., if the CD is in drive D, enter “D:\setup.exe”).

2. Select “Install Driver”. The Software Installation Wizard will appear and begin to download drivers.

P74967ea_F5U602ea.indb 4

4

14/3/06 4:36:25 pm

5

4

Software Setup

3. If you receive the following “Software Installation” notice, click on “Continue Anyway” to continue with the installation process.

1

2

3

4

5

4. After the files have been successfully copied over, a window will appear to confirm that driver installation is complete. Click “OK” to complete the installation process.

5. You will be asked if you want to restart your computer now or later. Select “No, I will restart my computer later” and perform a manual shutdown through the “Start” menu.

EN

5

P74967ea_F5U602ea.indb 5 14/3/06 4:36:26 pm

1

2

3

4

5

Hardware Installation

1. After completion of software setup, shut down your computer and disconnect all connected devices and peripherals.

2. Remove the cover from your computer. Refer to your computer manufacturer’s user manual for details on how to do this. Touch any bare metal portion of your computer case to discharge yourself of any static electricity. This prevents damage to your computer and the PCI Express

Card.

3. Locate the PCI Express slot on your computer’s main circuit board. Remove the metal plate that covers the rear slot corresponding to the PCI Express slot you have selected (see image below).

P74967ea_F5U602ea.indb 6

4. Remove the PCI Express Card from its protective antistatic packaging. Handle it by the metal bracket; do not touch the gold-edged connectors. Insert the PCI Express

Card into the PCI Express slot, carefully aligning the rear bracket to the computer case. Make sure that the edge of the PCI Express Card is fully inserted into the slot.

6

14/3/06 4:36:26 pm

7

6

Hardware Installation

5. Replace the slot-cover screw.

1

2

3

4

5

6. After installing the PCI Express Card, replace your computer’s outer cover and turn on your computer.

NOTE: Do not plug any devices into the PCI Express

Card until driver installation is completely finished.

7. The New Hardware Wizard will launch and recognize the

PCI Express Card.

8. Windows will automatically install the correct driver.

Installation is now complete. The PCI Express Card is now ready to use.

EN

7

P74967ea_F5U602ea.indb 7 14/3/06 4:36:27 pm

1

2

3

4

5

Verifying Proper Installation

Check the Windows Device Manager to confirm that your

PCI Express Card has been properly installed.

1. Right-click on “My Computer” and select “Manage”.

2. Select the “Device Manager” tab.

3. Click the (+) sign next to “IEEE 1394 Bus host controllers”.

The “IEEE 1394 Bus host controllers” will now include one “Texas Instruments OHCI Compliant IEEE 1394 Host

Controller” entry.

4. Click the (+) sign next to “Universal Serial Bus controllers”.

It will now include two “NEC PCI to USB Open Host

Controller” entries and one “Standard Enhanced PCI to

USB Host Controller” entry.

P74967ea_F5U602ea.indb 8

8

14/3/06 4:36:27 pm

9

Verifying Proper Installation

1

2

3

4

5

EN

8

P74967ea_F5U602ea.indb 9

9

14/3/06 4:36:28 pm

1

2

3

4

5

Information

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product,

F5U602ea to which this declaration relates,

Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Declaration of Conformity

We, Belkin Corporation, declare under our sole responsibility that the F5U602, to which this declaration relates, is in conformity with Generic Emissions Standard EN

55022:1998 Class B, EN50081-1 and with Generic Immunity Standard EN50082-1

1992.

Modifications

The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment.

Belkin Corporation Limited Lifetime Product Warranty

Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required.

This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced.

THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF

ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN

SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING,

WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

10

P74967ea_F5U602ea.indb 10 14/3/06 4:36:29 pm

11

Information

No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.

BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF

WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT

LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR

REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN,

OR USED WITH, BELKIN PRODUCTS.

Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

1

2

3

4

5

EN

10

P74967ea_F5U602ea.indb 11

11

14/3/06 4:36:29 pm

FireWire 800 and USB 2.0

PCI Express ™ Card

Belkin Ltd.

Express Business Park

Shipton Way, Rushden

NN10 6GL, United Kingdom

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, The Netherlands

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax

Belkin GmbH

Hanebergstrasse 2

80637 Munich, Germany

+49 (0) 89 143405 0

+49 (0) 89 143405 100 fax

Belkin SAS

130 rue de Silly

92100 Boulogne-Billancourt, France

+33 (0) 1 41 03 14 40

+33 (0) 1 41 31 01 72 fax

Belkin Tech Support

Europe: 00 800 223 55 460

© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. FireWire is a trademark of Apple Computer, Inc., registered in the

U.S. and other countries. PCI Express is a trademark of PCMCIA.

P74967ea

P74967ea_F5U602ea.indb 12 14/3/06 4:36:30 pm

Carte PCI Express ™

FireWire 88 et USB 2.0

Ajoutez des ports FireWire ® 800 et USB 2.0 Haut Débit à votre ordinateur grâce à la technologie PCI Express

Manuel de l’utilisateur

P74967ea_F5U602ea.indb 1

F5U602ea

14/3/06 4:36:41 pm

Table des matières

1. Introduction ...................................................................... 1

Caractéristiques ............................................................ 2

Spécifications ................................................................ 2

Environnement .............................................................. 2

Configuration minimum requise .................................... 3

Contenu de l’emballage ................................................ 3

2. Installation du logiciel ..................................................... 4

3. Installation du matériel ................................................... 6

4. Vérification de l’installation ............................................. 8

5. Information .................................................................... 10

P74967ea_F5U602ea.indb 2 14/3/06 4:36:41 pm

1

Introduction

Qu’est-ce que le PCI Express ?

Au cours des 10 dernières années, le PCI a fait office d’interface de choix pour les ordinateurs personnels : presque chaque ordinateur est doté du même bus PCI 32 bits à 33 MHz, offrant une bande passante maximum de

133,3 Mbps. Aujourd’hui, à l’ère de l’information, la taille des données augmente exponentiellement, ce qui accroît la demande pour des débits de transfert plus rapide. Cette demande amena Intel à développer la norme PCI Express, qui procure des transferts de données plus rapides et plus fiables.

Les bus PCI Express standard comprennent les formules x1, x2, x4, x8, et x16, chacune d’entre elles ayant un emplacement de conception unique. Une transmission à chemin unique sur un bus PCI Express à voie unique (x1) peut atteindre un débit pouvant aller jusqu’à 250 Mo, près du double du débit standard PCI. Un bus PCI Express à 16 voies (x16) peut atteindre une bande passante de 16 Gbps.

3

4

1

2

5

FR

1

P74967ea_F5U602ea.indb 1 14/3/06 4:36:41 pm

3

4

1

2

5

Introduction

Caractéristiques

• Conforme aux caractéristiques techniques PCI Express

2,5 Gbps à une voie

• Procure un débit USB 2.0 jusqu’à 480 Mbps et un débit

1394b jusqu’à 800 Mbps

Caractéristiques techniques

• Interface : PCI Express à une voie

• Mode : Carte PCI Express USB 2.0/1394b

• Contrôleur : NEC UPD720101+ TI TSB82AA2+ TI XIO2000

• Canaux : USB 2.0 : 2 ports externes, 1 port interne ;

1394b : 2 ports externes et 1 port interne

Environnement

• Température de fonctionnement : 0 °C ~ 57 °C

• Température de stockage : -20 °C ~ 85 °C

• Température de fonctionnement : 5 ~ 95 % HR

P74967ea_F5U602ea.indb 2

2

14/3/06 4:36:41 pm

3

2

Introduction

Configuration minimum requise

• Ordinateur Windows ® avec emplacement PCI Express libre *

• Windows 2000, XP, Server 2003

* Remarque : Cette Carte ne convient pas aux emplacements PCI standard.

Contenu de l’emballage

• Carte PCI Express FireWire 800 et USB 2.0

• Manuel de l’Utilisateur

• CD de pilotes

3

4

1

2

5

FR

3

P74967ea_F5U602ea.indb 3 14/3/06 4:36:42 pm

3

4

1

2

5

Installation du logiciel

REMARQUE IMPORTANTE : Vous devez d’abord installer les pilotes de la Carte PCI Express FireWire 800 et USB

2.0 avant de procéder à l’installation physique de la carte sur votre ordinateur.

1. Insérez le CD d’installation de la Carte PCIe FireWire 800 et USB 2.0 dans votre lecteur de CD-ROM. Le menu principal apparaît automatiquement après quelques instants.

REMARQUE : Si le CD ne démarre pas automatiquement, cliquez sur le bouton « Start [Démarrer] » et choisissez

« Run [Exécuter] ». Dans la boîte de dialogue, entrez

« <lecteur>:\Setup.exe » et cliquez sur « OK » (où

« <lecteur> » est la lettre qui correspond à votre lecteur de

CD-ROM, sous « Poste de Travail ». Par exemple, si votre lecteur porte la lettre D, tapez « D:\setup.exe ».)

2. Sélectionnez « Install Driver [Installer le pilote] »).

L’assistant d’installation apparaît et télécharge les pilotes.

P74967ea_F5U602ea.indb 4

4

14/3/06 4:36:42 pm

5

4

Installation du logiciel

3. Si le message « Hardware installation notice [Vérification de l’installation du pilote] » apparaît, cliquez sur

« Continue Anyway [Poursuivre] » pour poursuivre l’installation.

3

4

1

2

5

4. Après la copie des fichiers, une fenêtre apparaît, confirmant l’installation des pilotes. Cliquez sur

« Terminer »” pour achever l’installation.

5. Vous serez invité à redémarrer votre ordinateur, maintenant ou plus tard. Sélectionnez « No, I will restart my computer later [Non, je redémarrerai mon ordinateur plus tard] » et éteignez votre ordinateur manuellement à partir du menu « Démarrer ».

FR

5

P74967ea_F5U602ea.indb 5 14/3/06 4:36:43 pm

3

4

1

2

5

Installation du matériel

1. Après avoir procédé à l’installation du logiciel, éteignez votre ordinateur et débranchez tous les périphériques qui y sont branchés.

2. Retirez le capot de l’ordinateur. Reportez-vous au manuel de l’utilisateur du fabricant de l’ordinateur pour savoir comment faire. Touchez une partie métallique du boîtier afin de vous décharger de toute électricité statique. Ceci

évite d’endommager votre ordinateur et la Carte PCI

Express.

3. Recherchez l’emplacement PCI Express sur la carte mère de votre ordinateur. Retirez la plaque métallique qui recouvre l’ouverture arrière correspondant à la fente PCI

Express sélectionnée (voir l’illustration ci-dessous).

P74967ea_F5U602ea.indb 6

4. Retirez la carte PCI Express de son emballage protecteur anti-statique. Manipulez-la uniquement par les fixations métallique. Ne touchez pas les connecteurs dorés.

Insérez la carte PCI Express dans la fente PCI Express en alignant correctement la fixation arrière sur le boîtier de l’ordinateur. Assurez-vous que la carte PCI Express est bien insérée dans son emplacement.

6

14/3/06 4:36:44 pm

7

6

Installation du matériel

5 Remettez le capot de l’ordinateur en place.

6. Après avoir installé la carte PCI Express, remettez le couvercle en place et allumez l’ordinateur.

REMARQUE : Ne raccordez aucun périphérique à la carte PCI Express avant que l’installation du pilote ne soit terminée.

7. L’assistant Assistant Ajout de nouveau matériel démarre.

Celui-ci reconnaît automatiquement la carte PCI Express.

8. Windows XP installe automatiquement le pilote.

L’installation est terminée. La carte PCI Express est maintenant prête à l’emploi.

FR

3

4

1

2

5

7

P74967ea_F5U602ea.indb 7 14/3/06 4:36:44 pm

3

4

1

2

5

Vérification de l’installation

Ouvrez le Gestionnaire de périphériques de Windows afin de vous assurer que votre carte PCI Express a été correctement installée.

1. Cliquez avec le bouton droit de la souris sur « My computer [Poste de Travail] » et sélectionnez « Properties

[Propriétés] ».

2. Sélectionnez l’onglet « Device Manager [Gestionnaire de périphériques] ».

3. Cliquez sur le signe plus (+) à côté de « IEEE 1394

Bus host controllers ». La liste « IEEE 1394 Bus host controllers » comporte maintenant une entrée « Texas

Instruments OHCI Compliant IEEE 1394 Host Controller ».

4. Cliquez sur le signe plus (+) à côté de « Universal Serial

Bus controllers ». Elle comprend maintenant deux entrées

« NEC PCI to USB Open Host Controller » et une entrée

« Standard Enhanced PCI to USB Host Controller ».

P74967ea_F5U602ea.indb 8

8

14/3/06 4:36:45 pm

9

8

Vérification de l’installation

3

4

1

2

5

FR

9

P74967ea_F5U602ea.indb 9 14/3/06 4:36:46 pm

3

4

1

2

5

Information

Déclaration FCC

DÉCLARATION DE CONFORMITÉ À LA RÉGLEMENTATION FCC EN

MATIÈRE DE COMPATIBILITÉ ÉLECTROMAGNÉTIQUE

Nous, Belkin Corporation, sis au 501 West Walnut Street, Compton CA,

90220, États-Unis, déclarons sous notre seule responsabilité que le produit

F5U602ea auquel se réfère la présente déclaration, est conforme aux normes énoncées à l’alinéa 15 de la réglementation FCC. Le fonctionnement est assujetti aux deux conditions suivantes : (1) cet appareil ne peut pas provoquer d’interférence nuisible et (2) cet appareil doit accepter toute interférence reçue, y compris des interférences pouvant entraîner un fonctionnement non désiré.

Déclaration de conformité CE

Nous, Belkin Components, déclarons sous notre seule responsabilité que le produit F5U602, auquel se rapporte la présente déclaration, a été élaboré dans le respect des normes d’émissions EN 55022:1998 Classe B, EN50081-1, ainsi que des normes d’immunité EN50082-1 1992 en vigueur.

Modifications

La réglementation de la FCC souligne la nécessité d’indiquer à l’utilisateur que toute modification, de quelque nature que ce soit et non agréée par Belkin

Corporation, lui retire le droit d’utiliser l’appareil.

Garantie limitée à vie du produit de Belkin Corporation

Belkin Corporation garantit ce produit contre tout défaut matériel ou de fabrication pendant toute sa durée de vie. Si l’appareil s’avère défectueux, Belkin le réparera ou le remplacera gratuitement, à sa convenance, à condition que le produit soit retourné, port payé, pendant la durée de la garantie, au dépositaire Belkin agréé auprès duquel le produit a été acheté. Une preuve d’achat peut être exigée.

La présente garantie est caduque si le produit a été endommagé par accident, abus, usage impropre ou mauvaise application, si le produit a été modifié sans autorisation écrite de Belkin, ou si un numéro de série Belkin a été supprimé ou rendu illisible.

LA GARANTIE ET LES VOIES DE RECOURS SUSMENTIONNÉES FONT FOI

EXCLUSIVEMENT ET REMPLACENT TOUTES LES AUTRES, ORALES OU ÉCRITES,

EXPLICITES OU IMPLICITES. BELKIN REJETTE EXPRESSÉMENT TOUTES LES

GARANTIES IMPLICITES, Y COMPRIS MAIS SANS RESTRICTION, LES GARANTIES

10

P74967ea_F5U602ea.indb 10 14/3/06 4:36:46 pm

11

10

Information

AFFÉRENTES À LA QUALITÉ LOYALE ET MARCHANDE ET À LA POSSIBILITÉ

D’UTILISATION À UNE FIN DONNÉE.

Aucun dépositaire, représentant ou employé de Belkin n’est habilité à apporter des modifications ou adjonctions à la présente garantie, ni à la proroger.

BELKIN N’EST PAS RESPONSABLE DES DOMMAGES SPÉCIAUX, DIRECTS OU

INDIRECTS, DÉCOULANT D’UNE RUPTURE DE GARANTIE, OU EN VERTU DE

TOUTE AUTRE THÉORIE JURIDIQUE, Y COMPRIS MAIS SANS RESTRICTION

LES PERTES DE BÉNÉFICES, TEMPS D’ARRÊT, FONDS DE COMMERCE,

REPROGRAMMATION OU REPRODUCTION DE PROGRAMMES OU DE

DONNÉES MÉMORISÉS OU UTILISÉS AVEC DES PRODUITS BELKIN OU

DOMMAGES CAUSÉS À CES PROGRAMMES OU À CES DONNÉES.

Certains pays ne permettent pas d’exclure ou de limiter les dommages accidentels ou consécutifs ou les exclusions de garanties implicites, de sorte que les limitations d’exclusions ci-dessus ne s’appliquent pas dans votre cas. La garantie vous confère des droits légaux spécifiques. Vous pouvez également bénéficier d’autres droits qui varient d’un pays à l’autre.

3

4

1

2

5

FR

11

P74967ea_F5U602ea.indb 11 14/3/06 4:36:46 pm

Carte PCI Express ™

FireWire 88 et USB 2.0

Belkin Ltd.

Express Business Park

Shipton Way, Rushden

NN10 6GL, Royaume-Uni

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 Fax

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, Pays-Bas

+31 (0) 20 654 7300

+31 (0) 20 654 7349 Fax

Assistance Technique Belkin

Europe : 00 800 223 55 460

Belkin GmbH

Hanebergstrasse 2

80637 Munich, Allemagne

+49 (0) 89 143405 0

+49 (0) 89 143405 100 Fax

Belkin SAS

130 rue de Silly

92100 Boulogne-Billancourt, France

+33 (0) 1 41 03 14 40

+33 (0) 1 41 31 01 72 Fax

© 2006 Belkin Corporation. Tous droits réservés. Toutes les raisons commerciales sont des marques déposées de leurs fabricants respectifs. FireWire est une marque de commerce de Apple Computer,

Inc., déposée aux États-Unis et dans d’autres pays. PCI Express est une marque de commerce de

PCMCIA.

P74967ea

P74967ea_F5U602ea.indb 12 14/3/06 4:36:47 pm

FireWire 800 und USB 2.0

PCI Express ™ -Karte

FireWire ® 800 und Hi-Speed USB 2.0-Ports für Computer mit PCI-

Express-Technologie

Benutzerhandbuch

P74967ea_F5U602ea.indb 1

F5U602ea

14/3/06 4:37:07 pm

Inhaltsverzeichnis

1. Einleitung ......................................................................... 1

Merkmale ....................................................................... 2

Technische Daten .......................................................... 2

Umgebung ..................................................................... 2

Mindest-Systemvoraussetzungen ................................. 3

Verpackungsinhalt ......................................................... 3

2. Software-Installation ....................................................... 4

3. Hardware-Installation ..................................................... 6

4. Überprüfen der Installation ............................................. 8

5. Informationen ................................................................ 10

P74967ea_F5U602ea.indb 2 14/3/06 4:37:07 pm

1

Einleitung

Was ist PCI Express?

In den letzten zehn Jahren war PCI die gängigste Schnittstelle für PCs. Fast jeder Computer ist mit demselben PCI-Bus-

Standard ausgestattet—32-Bit bei 33 MHz; die maximale

Datenübertragungsrate beträgt nur 133,3 Mbit/s. Im heutigen

Informationszeitalter besteht durch die exponentiell ansteigende

Datenmenge ein größerer Bedarf an schnellerer Datenübertragung.

Deshalb hat Intel den PCI Express-Standard entwickelt, der schnellere und zuverlässige Datenübertragung ermöglicht.

Zu den gängigen PCI Express-Bus-Formaten zählen x1, x2, x4, x8 und x16; alle zeichnen sich durch eine spezielle Steckplatz-

Konstruktion aus. Bei der Ein-Wege-Übertragung über PCI Express-

Bus mit einer Lane (x1) können Geschwindigkeiten von bis zu

250 MB erreicht werden— das ist fast doppelt so schnell wie die bisherige PCI-Übertragungsgeschwindigkeit. Ein 16-Lane (x16) PCI

Express-Bus kann Geschwindigkeiten bis zu 16 Gbit/s erreichen.

3

4

1

2

5

DE

1

P74967ea_F5U602ea.indb 1 14/3/06 4:37:08 pm

3

4

1

2

5

Einleitung

Merkmale

• Entspricht den Spezifikationen von 2,5 Gbit/s PCI Express mit einer

Lane (x1)

• USB 2.0-Übertragungsrate von bis zu 480 Mbit/s und 1394b-

Übertragungsrate von bis zu 800 Mbit/s

Technische Daten

• Schnittstelle: PCI Express mit einer Lane (x1)

• Modus: USB2.0/1394b PCI Express-Kombikarte

• Steuerung: NEC UPD720101+ TI TSB82AA2+ TI XIO2000

• Kanäle: Zwei externe USB 2.0-Anschlüsse und ein interner

Anschluss Zwei externe 1394b-Anschlüsse und ein interner

Anschluss

Umgebung

• Betriebstemperatur: 0° C - 57° C

• Lagertemperatur: -20° C - 85° C

• Relative Luftfeuchtigkeit: 5 - 95%

P74967ea_F5U602ea.indb 2

2

14/3/06 4:37:08 pm

3

2

Einleitung

Mindest-Systemvoraussetzungen

• Computer mit Windows

®

-Betriebssystem und freiem PCI Express-

Steckplatz*

• Windows 2000, XP, 2003 Server

* Hinweis: Diese Karte passt nicht in einen Standard-PCI-

Steckplatz.

Verpackungsinhalt

• FireWire 800 und USB 2.0 PCI Express-Karte

• Benutzerhandbuch

• Treiber-CD

3

4

1

2

5

DE

3

P74967ea_F5U602ea.indb 3 14/3/06 4:37:09 pm

3

4

1

2

5

Software-Installation

WICHTIGER HINWEIS: Vor der Installation der Hardware müssen

Sie die Treiber für die FireWire 800 und USB 2.0 PCI Express-

Karte auf Ihrem Computer installieren.

1. Legen Sie die CD mit der Installationssoftware für die FireWire 800 und USB 2.0 PCI Express-Karte in das CD-ROM-Laufwerk ein.

Nach einigen Minuten wird automatisch das Hauptmenü gestartet.

HINWEIS: Wenn die Haupt-CD nicht automatisch startet, klicken Sie auf „Start” und dann auf „Ausführen”. Geben Sie im

Dialogfeld „Ausführen” „<Laufwerk>:\setup.exe” ein und klicken

Sie auf „OK” ( „<Laufwerk>” ist der Buchstabe für das CD-ROM-

Laufwerk, das unter „Arbeitsplatz“ aufgeführt wird; wenn sich die

CD z. B. in Laufwerk D befindet, geben Sie „D:\setup.exe” ein).

2. Wählen Sie die Option „Install Driver” (Treiber installieren). Der

Software-Installationsassistent erscheint und beginnt mit dem

Herunterladen der Treiber.

P74967ea_F5U602ea.indb 4

4

14/3/06 4:37:10 pm

5

4

Software-Installation

3. Wenn Sie die folgende Meldung zur Software-Installation erhalten, klicken Sie auf „Continue Anyway” (Trotzdem fortfahren), um die

Installation fortzusetzen.

3

4

1

2

5

4. Wenn die Dateien erfolgreich übertragen worden sind, erscheint eine Meldung, die den Abschluss der Treiberinstallation bestätigt.

Klicken Sie auf „OK”, um den Installationsvorgang abzuschließen.

5. Sie werden gefragt, ob Sie Ihren Computer sofort oder später neu starten wollen. Wählen Sie „No, I will restart my computer later”

(Nein, ich will den Computer später neu starten) und fahren Sie den Computer manuell über das Start-Menü herunter.

DE

5

P74967ea_F5U602ea.indb 5 14/3/06 4:37:12 pm

3

4

1

2

5

Hardware-Installation

1. Fahren Sie den Computer nach der Software-Installation herunter und entfernen Sie alle angeschlossenen Geräte und

Peripheriegeräte.

2. Entfernen Sie die Abdeckung Ihres Computers. Genaue

Anweisungen hierzu finden Sie im Benutzerhandbuch des

Computers. Berühren Sie ein beliebiges Stück blankes Metall am Computergehäuse, um etwaige statische Ladung von sich abzuleiten Dadurch verhindern Sie, dass Ihr Computer und die PCI

Express-Karte beschädigt werden.

3. Suchen Sie den PCI Express-Steckplatz auf der Hauptplatine

Ihres Computers. Entfernen Sie die Metallschiene, die die

Rückwandöffnung für den ausgewählten PCI Express-Steckplatz abdeckt (s. Abbildung).

P74967ea_F5U602ea.indb 6

4. Entfernen Sie die antistatische Schutzhülle der PCI Express-Karte.

Berühren Sie die Karte nur an der Metalleinbauschiene, nicht an den vergoldeten Kartenrand-Steckverbindern! Stecken Sie die PCI

Express-Karte in den PCI Express-Steckplatz ein, und richten Sie die Rückwand-Einbauschiene sorgfältig am Computergehäuse aus. Achten Sie darauf, dass die Kante der PCI Express-Karte vollständig in den Steckplatz eingesteckt ist.

6

14/3/06 4:37:13 pm

7

6

Hardware-Installation

5 Schrauben Sie die Steckplatzschraube wieder an.

6. Befestigen Sie die Computerabdeckung nach der Installation der

PCI Express-Karte und schalten Sie ihn ein.

HINWEIS: Schließen Sie keine Geräte an die PCI Express-

Karte an, bevor die Treiberinstallation abgeschlossen ist.

7. Der „New Hardware Wizard” (Hardware-Assistent) wird gestartet und erkennt die PCI Express-Karte.

8. Windows installiert den richtigen Treiber automatisch.

Die Installation ist damit abgeschlossen. Die PCI Express-Karte ist jetzt betriebsbereit.

DE

3

4

1

2

5

7

P74967ea_F5U602ea.indb 7 14/3/06 4:37:13 pm

3

4

1

2

5

Überprüfen der Installation

Überprüfen Sie im Windows Geräte-Manager, ob die PCI Express-

Karte ordnungsgemäß installiert worden ist.

1. Klicken Sie mit der rechten Maustaste auf das Symbol

„Arbeitsplatz” und klicken Sie anschließend auf „Verwalten”.

2. Rufen Sie den „Geräte-Manager” auf.

3. Klicken Sie auf das (+) Zeichen neben „IEEE 1394 Bus host controllers”. Die Liste „IEEE 1394 Bus host controllers” enthält jetzt den Eintrag „Texas Instruments OHCI Compliant IEEE 1394

Host Controller”.

4. Klicken Sie auf das (+) Zeichen neben „Universal Serial Bus

Controller”. Jetzt werden zusätzlich zwei Einträge mit der

Bezeichnung „NEC PCI to USB Open Host Controller” und

„Standard Enhanced PCI to USB Host Controller” aufgeführt.

P74967ea_F5U602ea.indb 8

8

14/3/06 4:37:14 pm

9

8

Überprüfen der Installation

3

4

1

2

5

DE

9

P74967ea_F5U602ea.indb 9 14/3/06 4:37:16 pm

3

4

1

2

5

Hinweise

FCC-erklärung

KONFORMITÄTSERKLÄRUNG ZUR EINHALTUNG DER FCC-

BESTIMMUNGEN ÜBER ELEKTROMAGNETISCHE KOMPATIBILITÄT

Wir, Belkin Corporation, eine Gesellschaft mit Sitz in 501 West Walnut Street,

Compton, CA 90220, USA, erklären hiermit in alleiniger Verantwortung, dass dieser Artikel, Nr.

F5U602ea auf den sich diese Erklärung bezieht, in Einklang mit Teil 15 der FCC-Regelungen steht. Der Betrieb unterliegt den beiden folgenden Bedingungen: (1) Dieses Gerät darf schädigende Störungen nicht verursachen, und (2) dieses Gerät muss jedwede Störung annehmen, einschließlich der

Störungen, die einen unerwünschten Betrieb verursachen könnten.

CE-Konformitätserklärung

Wir, Belkin Corporation, erklären alleinverantwortlich, dass das Produkt F5U602, auf das sich diese Erklärung bezieht, der Europanorm für die elektromagnetische

Verträglichkeit EN 55022:1998 für die Klasse B und der Europanorm für die

Störfestigkeit EN50082-1 1992 entspricht.

Anpassungen

Nach den Vorschriften der FCC muss dem Benutzer mitgeteilt werden, dass

Änderungen oder Modifikationen an diesem Gerät, die nicht ausdrücklich von der

Belkin Corporation genehmigt wurden, dazu führen können, dass die Berechtigung des Benutzers zum Betrieb des Geräts erlischt.

Eingeschränkte lebenslange Produktgarantie von Belkin Corporation

Belkin Corporation gewährleistet hiermit, dass dieses Produkt während seiner gesamten Lebensdauer keine Verarbeitungs- und Materialfehler aufweisen wird. Bei Feststellung eines Fehlers wird Belkin das Produkt nach eigenem

Ermessen entweder kostenlos reparieren oder austauschen, sofern es während des Garantiezeitraums ausreichend frankiert an den autorisierten Belkin-Händler zurückgegeben wurde, bei dem es erworben wurde. Ein Kaufnachweis kann verlangt werden.

Diese Garantie erstreckt sich nicht auf die Beschädigung des Produkts durch

Unfall, missbräuchliche, unsachgemäße oder fehlerhafte Verwendung oder

Anwendung. Ebenso ist die Garantie unwirksam, wenn das Produkt ohne schriftliche

Genehmigung durch Belkin verändert oder wenn eine Belkin-Seriennummer entfernt oder unkenntlich gemacht wurde.

10

P74967ea_F5U602ea.indb 10 14/3/06 4:37:16 pm

11

10

Hinweise

DIE VORSTEHENDEN GARANTIEBEDINGUNGEN UND RECHTSBEHELFE

SCHLIESSEN ALLE ANDEREN GEWÄHRLEISTUNGEN UND RECHTSBEHELFE

- OB MÜNDLICH ODER SCHRIFTLICH, AUSDRÜCKLICH ODER KONKLUDENT

- AUS UND TRETEN AN DEREN STELLE. BELKIN ÜBERNIMMT INSBESONDERE

KEINERLEI KONKLUDENTE GEWÄHRLEISTUNGEN, U.A. AUCH KEINE

GEWÄHRLEISTUNG DER EIGNUNG FÜR EINEN BESTIMMTEN ZWECK ODER DIE

HANDELSÜBLICHE QUALITÄT.

Kein Händler, Bevollmächtigter bzw. Vertreter oder Mitarbeiter von Belkin ist befugt, diese Gewährleistungsregelung in irgendeiner Weise abzuändern oder zu ergänzen.

BELKIN HAFTET NICHT FÜR BESONDERE, DURCH ZUFALL EINGETRETENE

ODER FOLGESCHÄDEN AUFGRUND DER VERLETZUNG EINER

GEWÄHRLEISTING ODER NACH MASSGABE EINER ANDEREN RECHTSLEHRE

(U.A. FÜR ENTGANGENE GEWINNE, AUSFALLZEITEN, GESCHÄFTS- ODER

FIRMENWERTEINBUSSEN BZW. BESCHÄDIGUNG, NEUPROGRAMMIERUNG

ODER WIEDERHERSTELLUNG VON PROGRAMMEN ODER DATEN NACH

SPEICHERUNG IN ODER NUTZUNG IN VERBINDUNG MIT BELKIN-

PRODUKTEN.

Da in manchen Ländern der Ausschluss oder die Beschränkung der Haftung für durch Zufall eingetretene oder Folgeschäden bzw. ein Ausschluss konkludenter

Gewährleistungen nicht zulässig ist, haben die vorstehenden Beschränkungen und Ausschlussregelungen für Sie möglicherweise keine Gültigkeit. Diese Garantie räumt Ihnen spezifische Rechte ein, die von Land zu Land unterschiedlich ausgestaltet sein können.

3

4

1

2

5

DE

11

P74967ea_F5U602ea.indb 11 14/3/06 4:37:17 pm

FireWire 800 und USB 2.0

PCI Express ™ -Karte

Belkin Ltd.

Express Business Park

Shipton Way, Rushden

NN10 6GL, Großbritannien

+44 (0) 1933 35 2000

Fax: +44 (0) 1933 31 2000

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, Niederlande

+31 (0) 20 654 7300

Fax: +31 (0) 20 654 7349

Belkin Technischer Support

Europa: 00 800 223 55 460

Belkin GmbH

Hanebergstraße 2

80637 München, Deutschland

+49 (0) 89 143405 0

Fax: +49 (0) 89 14 34 05 100

Belkin SAS

130 rue de Silly

92100 Boulogne-Billancourt, Frankreich

+33 (0) 1 41 03 14 40

Fax: +33 (0) 1 41 31 01 72

© 2006 Belkin Corporation. Alle Rechte vorbehalten. Alle Produktnamen sind eingetragene Marken der angegebenen Hersteller. FireWire ist eine Marke der Apple Computer, Inc., die in den USA und anderen Ländern eingetragen ist. PCI Express ist eine Marke von PCMCIA.

P74967ea

P74967ea_F5U602ea.indb 12 14/3/06 4:37:18 pm

FireWire 800 en USB 2.0

PCI Express ™ -kaart

Breid uw computer uit met FireWire ® 800 en hi-speed USB 2.0poorten die gebruik maken van PCI Express-technologie

Handleiding

P74967ea_F5U602ea.indb 1

NL

F5U602ea

14/3/06 4:37:38 pm

Inhoud

1. Inleiding ........................................................................... 1

Productkenmerken ........................................................ 2

Technische gegevens .................................................... 2

Omgeving ...................................................................... 2

Minimale systeemvereisten ........................................... 3

Inhoud van de verpakking ............................................ 3

2. Software installeren ........................................................ 4

3. Hardware installeren ....................................................... 6

4. Controle van de installatie ............................................... 8

5. Informatie ...................................................................... 10

P74967ea_F5U602ea.indb 2 14/3/06 4:37:39 pm

1

Inleiding

Wat is PCI Express?

De afgelopen tien jaar was PCI de standaard interface voor pc’s. Deze pc’s waren voorzien van een 32-bits PCI-bus, werkend met een kloksnelheid van 33 MHz, en haalden overdrachtssnelheden van maximaal 133,3 Mbps. In het informatietijdperk van vandaag waarin steeds grotere informatiepakketten verstuurd worden, is er steeds meer vraag naar hogere overdrachtssnelheden. Intel heeft ingespeeld op deze vraag met de ontwikkeling van de

PCI Express-standaard, die een stabielere overdracht met hogere snelheden mogelijk maakt.

Standaard PCI Express-busvormen zijn x1, x2, x4, x8 en x16, waarbij elke vorm wordt gekenmerkt door een uniek sleuf-design. Eénwegs overdracht op een éénbaans (x1) PCI

Express-bus kan met snelheden van tot 250 Mbps plaats vinden - bijna het dubbele van de snelheid die bij standaard

PCI-overdracht mogelijk is. Een zestienbaans (x16) PCI

Express bus kan snelheden tot 16 Gbps bereiken.

3

4

1

2

5

NL

1

P74967ea_F5U602ea.indb 1 14/3/06 4:37:39 pm

3

4

1

2

5

Inleiding

Productkenmerken

• Voldoet aan éénbaans 2,5 Gbps PCI Express-specificaties

• Maakt USB 2.0-overdrachtssnelheden van tot 480 Mbps mogelijk en 1394b-overdrachtssnelheden van tot 800 Mbps

Technische gegevens

• Interface: Eénbaans PCI Express

• Modus: USB2.0/1394b Combo PCI Express-kaart

• Controller: NEC UPD720101+ TI TSB82AA2+ TI XIO2000

• Kanalen: Twee externe USB 2.0-poorten en één interne poort Twee externe 1394b-poorten en één interne poort

Omgeving

• Bedrijfstemperatuur: 0 °C ~ 57 °C

• Bewaartemperatuur: -20 °C ~ 85 °C

• Vochtigheidsgraad: 5 ~ 95% relatieve luchtvochtigheid

P74967ea_F5U602ea.indb 2

2

14/3/06 4:37:39 pm

3

2

Inleiding

Minimale systeemvereisten

• Windows ® -based computer met een vrije PCI Expresssleuf*

• Windows 2000, XP, 2003 server

* Let op: De geleverde kaart past niet in een standaard

PCI-sleuf.

Inhoud van de verpakking

• FireWire 800 en USB 2.0 PCI Express-kaart

• Handleiding

• CD met stuurprogramma

3

4

1

2

5

NL

3

P74967ea_F5U602ea.indb 3 14/3/06 4:37:40 pm

3

4

1

2

5

Software installeren

BELANGRIJKE OPMERKING: U dient de stuurprogramma’s voor de FireWire 800 en USB 2.0 PCI

Express-kaart te installeren voordat u de hardware in uw computer plaatst.

1. Plaats de installatie-cd van de FireWire 800 en USB

2.0 PCI Express-kaart in uw cd-romstation. Na enige ogenblikken start het hoofdmenu automatisch.

OPMERKING: Als de cd niet automatisch start, klik dan op de “Start”-knop en selecteer “Run” (Uitvoeren). In het dialoogvenster “Run” (Uitvoeren) typt u “<station>:\Setup.

exe” in (“<station>” is de letter van het station dat uw cd-romstation onder “My Computer” (Deze computer) aanduidt - bijv., als de cd in station D is geplaatst, typt u

“D:\setup.exe” in). Vervolgens klikt u op “OK”.

2. Selecteer “Install Driver” (Stuurprogramma installeren).

De software-installatiewizard zal verschijnen en de stuurprogramma’s zullen gedownload worden.

P74967ea_F5U602ea.indb 4

4

14/3/06 4:37:40 pm

5

4

Software installeren

3. Als de melding “Software Installation” (Software-installatie) verschijnt, klikt u op “Continue Anyway” (Toch doorgaan) om verder te gaan met het installatieproces.

1

2

3

4

5

4. Nadat de bestanden zijn gekopieerd, zal er een venster verschijnen waarin bevestigd wordt dat de installatie van het stuurprogramma voltooid is. Klik op “OK” om het installatieproces af te ronden.

5. Er zal u gevraagd worden of u de computer direct of pas later wilt herstarten. Selecteer “No, I will restart my computer later” (Nee, ik herstart mijn computer pas later) en sluit uw computer handmatig af via het Start-menu.

NL

5

P74967ea_F5U602ea.indb 5 14/3/06 4:37:41 pm

3

4

1

2

5

Hardware installeren

1. Nadat de software is geïnstalleerd, sluit u uw computer af en ontkoppelt u alle aangesloten apparatuur en randapparaten.

2. Open de computerkast. Zie de handleiding van uw computer voor nadere informatie over hoe u dit moet doen. Zorg ervoor dat u een van de metalen delen van uw computerkast aanraakt om uzelf te ontdoen van statische elektriciteit. Zo voorkomt u beschadiging van uw computer en de PCI Express-kaart.

3. Zoek op het moederbord van uw computer de PCI

Express-sleuven op. Verwijder aan de achterkant van uw computer het metalen beschermplaatje dat correspondeert met de PCI Express-sleuf die u hebt gekozen (zie onderstaande afbeelding).

P74967ea_F5U602ea.indb 6

4. Verwijder de PCI Express-kaart uit de anti-statische verpakking. Pak de kaart bij de metalen beugel vast en raak de vergulde connectors niet aan. Bevestig de kaart in de PCI Express-sleuf en zorg ervoor dat de beugel aan de achterzijde van de kaart evenwijdig loopt met de computerkast. Zorg ervoor dat de rand van de PCI

Express-kaart volledig in de sleuf is gestoken.

6

14/3/06 4:37:42 pm

7

6

Hardware installeren

5. Bevestig het metalen afdekplaatje weer op de sleuf.

6. Nadat u de PCI Express-kaart hebt geïnstalleerd en u de computerkast weer hebt gesloten, zet u de computer aan.

OPMERKING: Pas als het stuurprogramma volledig is geïnstalleerd, mag u apparaten op de PCI Expresskaart aansluiten.

7. De “New Hardware Wizard” zal de PCI Express-kaart herkennen.

8. Windows zal het juiste stuurprogramma automatisch installeren.

De installatie is nu voltooid. De PCI Express-kaart is nu klaar voor gebruik.

7

NL

3

4

1

2

5

P74967ea_F5U602ea.indb 7 14/3/06 4:37:43 pm

3

4

1

2

5

Controle van de installatie

Controleer de “Windows Device Manager” (Windows

Apparaatbeheer) om te zien of uw PCI Express-kaart correct is geïnstalleerd.

1. Klik met de rechter muisknop op “My Computer” (Deze computer) en selecteer “Manage” (Beheer).

2. Selecteer het tabblad “Device Manager” (Apparaatbeheer).

3. Klik op het plusteken (+) naast “IEEE 1394 Bus host controllers”. De lijst met “IEEE 1394 Bus host controllers” bevat nu de “Texas Instruments OHCI Compliant IEEE

1394 Host Controller”.

4. Klik op het plusteken (+) naast “Universal Serial Bus controllers”. De lijst bevat nu twee ingangen voor “NEC

PCI to USB Open Host Controller” en een ingang voor

“Standard Enhanced PCI to USB Host Controller”.

P74967ea_F5U602ea.indb 8

8

14/3/06 4:37:44 pm

9

8

Controle van de installatie

3

4

1

2

5

NL

9

P74967ea_F5U602ea.indb 9 14/3/06 4:37:45 pm

3

4

1

2

5

Informatie

FCC-verklaring

VERKLARING VAN CONFORMITEIT MET DE FCC-VOORSCHRIFTEN

VOOR ELEKTROMAGNETISCHE COMPATIBILITEIT

Wij, Belkin Corporation, gevestigd 501 West Walnut Street, Compton, CA

90220, Verenigde Staten van Amerika, verklaren hierbij dat wij de volledige verantwoordelijkheid aanvaarden dat het product met het artikelnummer:

F5U602ea waarop deze verklaring betrekking heeft, voldoet aan Deel 15 van de FCC-voorschriften. Het gebruik ervan is onderworpen aan de beide volgende voorwaarden: (1) het apparaat mag geen schadelijke storingen opwekken en (2) het apparaat moet elke ontvangen interferentie accepteren, waaronder storingen die een ongewenste werking kunnen veroorzaken.

CE-verklaring van overeenstemming

Wij, Belkin Corporation, verklaren dat ons product F5U602 waarop deze verklaring betrekking heeft, voldoet aan de algemene emissienormen conform

EN 55022:1998 Klasse B, EN50081-1 en aan de algemene immuniteitsnormen conform EN50082-1 1992.

Veranderingen

De Federal Communications Commission eist dat de gebruiker ervoor wordt gewaarschuwd dat elke verandering aan het apparaat die niet uitdrukkelijk door

Belkin Corporation is goedgekeurd de bevoegdheid van de gebruiker om het apparaat te bedienen teniet kan doen.

Beperkte levenslange productgarantie van Belkin Corporation

Belkin Corporation geeft garantie voor de levensduur van het product op materiaal- en fabricagefouten. Wanneer een defect wordt geconstateerd, zal

Belkin naar eigen keuze het product repareren of kosteloos vervangen, op voorwaarde dat het product tijdens de garantieperiode, met vooruitbetaalde vervoerskosten, wordt geretourneerd aan de officiële Belkin dealer bij wie het product is gekocht. Overlegging van het aankoopbewijs kan noodzakelijk zijn.

Deze garantie is niet van toepassing als het product is beschadigd als gevolg van een ongeluk, misbruik, verkeerd gebruik of een verkeerde toepassing; als het product zonder schriftelijke toestemming van Belkin is gewijzigd of als een serienummer dat door Belkin is aangebracht, is verwijderd of onleesbaar is gemaakt.

10

P74967ea_F5U602ea.indb 10 14/3/06 4:37:45 pm

11

10

Informatie

DE GARANTIE EN VERHAALSMOGELIJKHEDEN DIE HIERVOOR ZIJN

UITEENGEZET SLUITEN ELKE ANDERE GARANTIE OF VERHAALSMOGELIJKHEID

UIT, HETZIJ MONDELING OF SCHRIFTELIJK, HETZIJ UITDRUKKELIJK OF

IMPLICIET. BELKIN WIJST UITDRUKKELIJK ELKE EN ALLE IMPLICIETE

AANSPRAKELIJKHEID OF GARANTIE AF, WAARONDER, ZONDER ENIGE

BEPERKING, GARANTIES BETREFFENDE DE VERKOOPBAARHEID OF

GESCHIKTHEID VOOR EEN BEPAALDE TOEPASSING.

Geen enkele dealer, vertegenwoordiger of werknemer van Belkin is bevoegd tot wijziging, uitbreiding of aanvulling van deze garantie.

BELKIN IS NIET AANSPRAKELIJK VOOR SPECIFIEKE SCHADE, INCIDENTELE

SCHADE OF GEVOLGSCHADE TEN GEVOLGE VAN HET NIET NAKOMEN

VAN DE GARANTIE, OF TEN GEVOLGE VAN ENIG ANDER JURIDISCH

CONFLICT, WAARONDER, MAAR NIET UITSLUITEND WINSTDERVING,

PRODUCTIETIJDVERLIES, GOODWILL, BESCHADIGING VAN PROGRAMMA’S

OF GEGEVENS DIE ZIJN OPGESLAGEN IN OF WORDEN GEBRUIKT

DOOR BELKIN-PRODUCTEN, EN HET OPNIEUW PROGRAMMEREN OF

REPRODUCEREN ERVAN.

In sommige staten of landen is het niet toegestaan om incidentele schade, voortvloeiende schade en impliciete garanties uit te sluiten of te beperken; in dat geval gelden de bovenstaande beperkingen of uitsluitingen wellicht niet voor u.

Deze garantie verleent u specifieke wettelijke rechten en wellicht hebt u andere rechten die van staat tot staat verschillen.

3

4

1

2

5

NL

11

P74967ea_F5U602ea.indb 11 14/3/06 4:37:45 pm

FireWire 800 en USB 2.0

PCI Express ™ -kaart

Belkin Ltd.

Express Business Park

Shipton Way, Rushden

NN10 6GL, Verenigd Koninkrijk

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, Nederland

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax

Technische ondersteuning

Europa: 00 800 223 55 460

Belkin GmbH

Hanebergstraße 2

80637 München, Duitsland

+49 (0) 89 143405 0

+49 (0) 89 143405 100 fax

Belkin SAS

130 rue de Silly

92100 Boulogne-Billancourt, Frankrijk

+33 (0) 1 41 03 14 40

+33 (0) 1 41 31 01 72 fax

© 2006 Belkin Corporation. Alle rechten voorbehouden. Alle handelsnamen zijn gedeponeerde handelsmerken van de betreffende rechthebbenden. FireWire is een handelsmerk van Apple

Computer, Inc. dat gedeponeerd is in de Verenigde Staten en in andere landen. PCI Express is een handelsmerk van PCMCIA.

P74967ea

P74967ea_F5U602ea.indb 12 14/3/06 4:37:46 pm

Tarjeta PCI Express PCI

Express ™ FireWire 800 y

USB 2.0

Añada a su ordenador puertos de alta velocidad USB 2.0 y FireWire ®

800 utilizando la tecnología PCI Express

Manual del usuario

P74967ea_F5U602ea.indb 1

F5U602ea

14/3/06 4:38:05 pm

Índice de contenidos

1. Introducción ..................................................................... 1

Características .............................................................. 2

Especificaciones ........................................................... 2

Entorno .......................................................................... 2

Requisitos mínimos del sistema .................................. 3

Contenido del paquete ................................................. 3

2. Instalación del software .................................................. 4

3. Instalación del hardware ................................................. 6

4. Verificación de la instalación ........................................... 8

5. Información .................................................................... 10

P74967ea_F5U602ea.indb 2 14/3/06 4:38:05 pm

1

Introducción

Introducción a PCI Express

Durante los últimos 10 años, PCI ha sido la principal interfaz para los ordenadores personales, prácticamente todos los PC utilizaban la especificación bus PCI, de 32 bits, funcionando a 33 MHz, y alcanzando una tasa de transferencia máxima de sólo 133,3 Mbps. Nos encontramos en la era de información, en la que el tamaño de los datos crece exponencialmente, aumentando la demanda de tasas de transferencia más rápidas. Esta necesidad condujo a

Intel a desarrollar el estándar PCI Express, que ofrece mayor velocidad y estabilidad para las transferencias de datos.

Las formas comunes de PCI Express son las llamadas x1, x2, x4, x8, y x16, cada forma se caracteriza por un diseño de ranura único. Un bus PCI Express de transmisión en una línea (x1) en una dirección puede alcanzar una velocidad de

250 MB, casi el doble que la velocidad de transmisión del estándar PCI. Un bus PCI Express de 16 líneas (x16) puede alcanzar velocidades de hasta 16 Gbps.

3

4

1

2

5

ES

1

P74967ea_F5U602ea.indb 1 14/3/06 4:38:06 pm

3

4

1

2

5

Introducción

Características

• Cumple con las especificaciones PCI Express 2,5 Gbps de una línea

• Ofrece una tasa de transferencia USB 2.0 de hasta 480

Mbps y una tasa de transferencia 1394b (FireWire 800) de hasta 800 Mbps

Especificaciones

• Interfaz: PCI Express de una línea

• Modo: Tarjeta PCI Express Combo USB2.0/1394b

• Controlador NEC UPD720101+ TI TSB82AA2+ TI XIO2000

• Canales: 2 puertos USB 2.0 externos y 1 puerto interno,

2 puertos 1394b externos y 1 puerto interno

Entorno

• Temperatura de funcionamiento: 0° C ~ 57° C

• Temperatura de almacenamiento: -20° C ~ 85° C

• Humedad relativa de funcionamiento: 5 ~ 95% Humedad relativa

2

P74967ea_F5U602ea.indb 2 14/3/06 4:38:06 pm

3

2

Introducción

Requisitos mínimos del sistema

• Ordenador con Windows ® y ranura PCI Express disponible*

• Windows 2000, XP, 2003 Server

* Atención: La tarjeta incluida no encajará en una ranura estándar PCI.

Contenido del paquete

• Tarjeta PCI Express FireWire 800 y USB 2.0

• Manual del usuario

• Controlador en CD

3

4

1

2

5

P74967ea_F5U602ea.indb 3

3

ES

14/3/06 4:38:06 pm

3

4

1

2

5

Instalación del software

NOTA IMPORTANTE: Antes de instalar el hardware en su ordenador, debe instalar los controladores de la Tarjeta

PCI Express FireWire 800 y USB 2.0.

1. Introduzca el CD de instalación de la Tarjeta PCI Express

FireWire 800 y USB 2.0 en la unidad de CD-ROM. Tras unos segundos, deberá aparecer automáticamente el menú principal.

ATENCIÓN: Si el CD no arranca automáticamente, haga clic en el botón “Inicio” y seleccione “Ejecutar”. En la ventana de diálogo “Ejecutar”, escriba “<driver>:\setup.

exe” y haga clic en “Aceptar” (“<driver>” representa la letra que identifica su unidad CD-ROM en “Mi PC”, por ejemplo, si el CD está en la unidad D, escriba “D:\setup.

exe”).

2. Seleccione “Install Driver” (Instalar controlador). Al

Asistente de instalación de software aparecerá y comenzará a descargar los controladores.

P74967ea_F5U602ea.indb 4

4

14/3/06 4:38:07 pm

5

4

Instalación del software

3. Si recibe el mensaje “Software Installation Notice”

(Advertencia para la instalación del software), haga clic en “Continue Anyway” (Continuar de todas formas) para continuar con el proceso de instalación.

3

4

1

2

5

4. Después de que los archivos se hayan copiado correctamente, aparecerá una ventana para confirmar que la instalación del controlador se ha completado.

Haga clic en “OK” (Aceptar) para completar el proceso de instalación.

5. Se le preguntará si desea reiniciar su ordenador en ese momento o más tarde. Seleccione “No, I will restart my computer later” (No, reiniciaré el ordenador más adelante) y apague el ordenador manualmente mediante el menú

“Inicio”.

ES

5

P74967ea_F5U602ea.indb 5 14/3/06 4:38:08 pm

3

4

1

2

5

Instalación del hardware

1. Después de completar la configuración del software, apague su ordenador y desconecte todos los dispositivos y periféricos conectados.

2. Quite la cubierta de su ordenador. Consulte el manual de usuario del fabricante de su ordenador para más información al respecto. Toque cualquier parte metálica de la carcasa de su ordenador para descargar la electricidad estática. Esto evitará que su ordenador y la Tarjeta PCI

Express sufran daños.

3. Localice la ranura PCI Express en la placa base de circuitos de su ordenador. Extraiga la placa de metal que cubre la ranura trasera que corresponde con la ranura PCI

Express que ha seleccionado (vea la siguiente ilustración).

P74967ea_F5U602ea.indb 6

4. Extraiga la Tarjeta PCI Express de su envoltorio protector antiestático. Sujétela por el soporte de metal, no toque los conectores con extremos dorados. Inserte la Tarjeta

PCI Express en la ranura PCI Express, alineando con cuidado el soporte trasero con la carcasa del ordenador.

Asegúrese de que el borde de la Tarjeta PCI Express está insertado completamente en la ranura.

6

14/3/06 4:38:08 pm

7

6

Instalación del hardware

5. Vuelva a colocar el tornillo de la cubierta de la ranura.

3

4

1

2

5

6. Después de instalar la Tarjeta PCI Express, vuelva a colocar la carcasa exterior del ordenador y encienda de nuevo su ordenador.

ATENCIÓN: No conecte ningún dispositivo a su

Tarjeta PCI Express hasta que no haya finalizado la instalación del controlador.

7. El Asistente de nuevo hardware se iniciará y reconocerá la

Tarjeta PCI Express.

8. Windows instalará automáticamente el controlador correcto.

La instalación ha finalizado. La Tarjeta PCI Express está lista para ser utilizada.

7

ES

P74967ea_F5U602ea.indb 7 14/3/06 4:38:09 pm

3

4

1

2

5

Verificación de la instalación

Consulte el “Administrador de dispositivos de Windows” para confirmar que la Tarjeta PCI Express ha sido instalada correctamente.

1. Haga clic con el botón derecho del ratón en ”Mi PC” y seleccione “Administrar”.

2. Seleccione la pestaña del ”Administrador de dispositivos”.

3. Haga clic en el signo más (+) situado junto a ”“IEEE

1394 Bus host controllers” (Controladores de bus IEEE

1394). La lista de “IEEE 1394 Bus host controllers”

(Controladores de bus IEEE 1394) incluirá ahora la entrada de ”Texas Instruments OHCI Compliant IEEE 1394 Host

Controller”.

4. Haga clic en el signo más (+) situado junto a “Universal

Serial Bus controllers”. Ahora incluirá dos entradas

“NEC PCI to USB Open Host Controller” y una entrada

“Standard Enhanced PCI to USB Host Controller”.

P74967ea_F5U602ea.indb 8

8

14/3/06 4:38:09 pm

9

8

Verificación de la instalación

P74967ea_F5U602ea.indb 9

9

3

4

1

2

5

ES

14/3/06 4:38:10 pm

Información

3

4

1

2

5

Regulación de la Comisión Federal de Comunicaciones de Estados Unidos (FCC)

DECLARACIÓN DE CONFORMIDAD CON LAS NORMATIVAS DE LA FCC

SOBRE COMPATIBILIDAD ELECTROMAGNÉTICA

Nosotros, Belkin Corporation, con sede en 501 West Walnut Street, Compton,

CA 90220, EE.UU., declaramos bajo nuestra sola responsabilidad que el producto

F5U602ea al que hace referencia la presente declaración, cumple con la sección 15 de las normativas de la FCC. Su utilización está sujeta a las siguientes dos condiciones: (1) este dispositivo no debe provocar interferencias nocivas y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluidas las interferencias que puedan provocar un funcionamiento no deseado.

Declaración de conformidad CE

Nosotros, Belkin Components, declaramos bajo nuestra sola responsabilidad que el producto F5U602, al que hace referencia la presente declaración, está en conformidad con el estándar genérico de emisiones EN 55022:1998 EN 50081-1 y con el estándar genérico de inmunidad EN 50082-1 1992.

Modificaciones

La FCC exige que se notifique al usuario de que cualquier cambio o modificación del presente dispositivo que no sea aprobado expresamente por Belkin

Corporation podría invalidar el derecho del usuario para utilizar este equipo.

Garantía de por vida del producto de Belkin Corporation Limited

Belkin Corporation proporciona para el presente producto una garantía para toda la vida de reparación gratuita, por lo que respecta a mano de obra y materiales.

En el caso de presentarse un fallo, Belkin decidirá entre la reparación del mismo o la sustitución del producto, en ambos casos sin costes, siempre que se devuelva durante el periodo de garantía y con los gastos de transporte abonados al vendedor autorizado de Belkin en el que se adquirió. Es posible que se solicite una prueba de compra.

Esta garantía perderá su validez en el caso de que el producto haya sido dañado de forma accidental, por abuso o utilización errónea del mismo; si el producto ha sido modificado sin la autorización por escrito de Belkin; o si alguno de los números de serie de Belkin ha sido eliminado o deteriorado.

10

P74967ea_F5U602ea.indb 10 14/3/06 4:38:11 pm

11

10

Información

LA GARANTÍA Y RESTITUCIONES LEGALES ESTABLECIDAS EXPRESAMENTE

EN EL PRESENTE ACUERDO SUSTITUYEN A TODAS LAS DEMÁS, ORALES O

ESCRITAS, EXPRESAS O IMPLÍCITAS. BELKIN RECHAZA DE MANERA EXPLÍCITA

TODAS LAS DEMÁS GARANTÍAS IMPLÍCITAS, INCLUYENDO, SIN LIMITACIÓN, LAS

GARANTÍAS DE COMERCIABILIDAD Y DE IDONEIDAD PARA UN FIN ESPECÍFICO.

Ningún distribuidor, agente o empleado de Belkin está autorizado a realizar ningún tipo de modificación, extensión o alteración de la presente garantía.

BELKIN NO SERÁ EN NINGÚN CASO RESPONSABLE POR LOS DAÑOS

IMPREVISTOS O CONSIGUIENTES RESULTANTES DE UN INCUMPLIMIENTO

DE LA GARANTÍA, O BAJO NINGUNA OTRA CONDICIÓN LEGAL,

INCLUYENDO, PERO NO EXCLUSIVAMENTE, LOS BENEFICIOS PERDIDOS,

PERÍODOS DE INACTIVIDAD, BUENA VOLUNTAD, DAÑOS DURANTE

LA REPROGRAMACIÓN O REPRODUCCIÓN DE CUALQUIERA DE LOS

PROGRAMAS O DATOS ALMACENADOS EN O UTILIZADOS CON LOS

PRODUCTOS BELKIN.

Algunas jurisdicciones no permiten la exclusión o limitación de los daños imprevistos o consecuentes ni las exclusiones de las garantías implícitas, por lo que cabe la posibilidad de que las anteriores limitaciones o exclusiones no le afecten. Esta garantía le proporciona derechos legales específicos y usted puede beneficiarse asimismo de otros derechos legales específicos que varían entre las distintas jurisdicciones.

3

4

1

2

5

ES

11

P74967ea_F5U602ea.indb 11 14/3/06 4:38:11 pm

Tarjeta PCI Express PCI

Express

FireWire 800 y

USB 2.0

Belkin Ltd.

Express Business Park

Shipton Way, Rushden

NN10 6GL, Reino Unido

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, Países Bajos

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax

Asistencia técnica de Belkin

Europa: 00 800 223 55 460

Belkin GmbH

Hanebergstrasse 2

80637 Múnich, Alemania

+49 (0) 89 143405 0

+49 (0) 89 143405 100 fax

Belkin SAS

130 rue de Silly

92100 Boulogne-Billancourt, Francia

+33 (0) 1 41 03 14 40

+33 (0) 1 41 31 01 72 fax

© 2006 Belkin Corporation. Todos los derechos reservados. Todos los nombres comerciales son marcas registradas de los respectivos fabricantes enumerados. FireWire es una marca comercial de Apple Computer, Inc., registrada en los EE.UU. y en otros países. PCI Express es una marca registrada de PCMCIA.

P74967ea

P74967ea_F5U602ea.indb 12 14/3/06 4:38:12 pm

Scheda PCI Express ™ USB

2.0 e FireWire 800

Aggiungete al computer delle porte USB 2.0 Hi-Speed e FireWire®

800 utilizzando la tecnologia PCI Express

Manuale d’uso

P74967ea_F5U602ea.indb 1

F5U602ea

14/3/06 4:38:23 pm

Indice

1. Introduzione ..................................................................... 1

Caratteristiche ............................................................... 2

Specifiche ...................................................................... 2

Temperature d’ambiente ............................................... 2

Requisiti minimi del sistema ......................................... 3

Contenuto della confezione ......................................... 3

2. Installazione del software ............................................... 4

3. Installazione dell’hardware ............................................. 6

4. Verifica dell’installazione ................................................ 8

5. Informazioni ................................................................... 10

P74967ea_F5U602ea.indb 2 14/3/06 4:38:23 pm

1

Introduzione

La tecnologia PCI Express

Negli ultimi dieci anni, il sistema di bus PCI (a 32 bit, frequenza a 33 MHz e velocità di trasferimento di soli

133,3 Mbps) è stato l’interfaccia principale utilizzato dalla maggior parte dei computer. Oggi, nell’era dell’informazione e con una quantità di dati in continua crescita, si sente sempre di più la necessità di disporre di maggiori velocità di trasferimento dati. È per questo motivo che la Intel

Corporation ha definito la standard PCI Express che consente una velocità di trasferimento più alta e più stabile.

Il sistema di bus PCI Express può implementare diverse linee di comunicazione (x1, x2, x4, x8 e x16) e ogni tipo di bus presenta uno slot caratterizzato da un design unico. La trasmissione seriale di un bus PCI Express a una linea (x1) può raggiungere velocità di 250 MB, circa il doppio delle velocità di trasmissione dati raggiunte dallo standard PCI.

Un bus PCI Express a 16 linee (x16) può raggiungere una velocità di 16 Bbps.

3

4

1

2

5

IT

1

P74967ea_F5U602ea.indb 1 14/3/06 4:38:23 pm

3

4

1

2

5

Introduzione

Caratteristiche

• Conforme alle specifiche Express PCI 2,5 Gbps x1

• Consente una velocità di trasferimento fino a 480 Mbps

(per USB 2.0) e fino a 800 Mbps (per FireWire 1394b)

Specifiche

• Interfaccia: PCI Express x1

• Modalità: Scheda PCI Express Combo USB 2.0/1394b

• Controller: NEC UPD720101+ TI TSB82AA2+ TI XIO2000

• Canali: 2 porte USB esterne e 1 porta interna; 2 porte

1394b esterne e 1 porta interna

Temperature d’ambiente

• Temperatura di funzionamento: 0° C ~ 57° C

• Temperatura di immagazzinaggio: -20° C ~ 85° C

• Temperatura di funzionamento: 5 ~ 95% RH

P74967ea_F5U602ea.indb 2

2

14/3/06 4:38:24 pm

3

Introduzione

Requisiti minimi del sistema

• Computer con Windows ® e uno slot PCI Express disponibile*

• Windows 2000, XP, 2003 Server

* Nota bene: questa scheda non è compatibile con gli slot

PCI standard.

Contenuto della confezione

• Scheda PCI Express USB 2.0 e FireWire 800

• Manuale d’uso

• Driver del CD

3

4

1

2

5

2

P74967ea_F5U602ea.indb 3

3

IT

14/3/06 4:38:24 pm

3

4

1

2

5

Installazione del software

AVVISO IMPORTANTE: è necessario installare i driver della scheda PCI Express USB 2.0 o FireWire 800 prima di installare l’hardware nel computer.

1. Inserire il CD di installazione PCIe USB 2.0 e FireWire 800 nel lettore CD-ROM. Dopo alcuni istanti, il menu principale si aprirà automaticamente.

NOTA BENE: se il sistema non avvia automaticamente il CD, fare clic su Start e poi su Esegui. Nella finestra di dialogo “Esegui”, digitare la seguente locazione sostituendo “drive” con la lettera corrispondente al lettore CD-ROM in cui si trova il CD (vedi in “Risorse del computer”): drive:\Windows\setup.exe”. Per esempio, se il CD si trova nell’unità D, digitare D:\Windows\setup.exe.

Quindi fare clic su OK.

2. Selezionare Install Driver. Il sistema avvierà il programma di configurazione guidata e comincerà a scaricare i driver.

P74967ea_F5U602ea.indb 4

4

14/3/06 4:38:24 pm

5

4

Installazione del software

3. Se dovesse comparire una finestra col messaggio

“Software Installation”, fare clic su Continue Anyway

(Ignora) per continuare il processo di installazione.

4. Una volta che i file sono stati scaricati correttamente, apparirà una finestra che confermerà il completamento dell’installazione. Fare clic su OK per completare l’installazione.

5. Il sistema richiederà se si desidera riavviare il computer subito o in un altro momento. Selezionare No e chiudere il sistema manualmente dal menu di avvio.

3

4

1

2

5

IT

5

P74967ea_F5U602ea.indb 5 14/3/06 4:38:25 pm

3

4

1

2

5

Installazione dell’hardware

1. Una volta completata l’installazione del software, chiudere il computer e disconnettere tutti i dispositivi e le periferiche collegati.

2. Aprire il pannello del computer. Prima di eseguire questa operazione, consultare il manuale d’uso del computer.

Toccare una parte metallica del telaio del computer per scaricare l’elettricità statica. Questo eviterà di danneggiare il computer e la scheda PCI Express.

3. Individuare lo slot PCI Express sul circuito stampato del computer. Rimuovere la lastra di metallo che ricopre lo slot sul retro corrispondente allo slot PCI Express selezionato (vedi immagine qui sotto).

P74967ea_F5U602ea.indb 6

4. Rimuovere la scheda PCI Express dalla sua confezione antistatica. Mantenere la scheda dalla staffa metallica: non toccare i connettori con le terminazioni dorate.

Inserire la scheda PCI Express nello slot PCI Express allineando attentamente la staffa posteriore con il pannello del computer. Verificare che il bordo della scheda PCI

Express sia completamente inserito nello slot.

6

14/3/06 4:38:26 pm

7

6

Installazione dell’hardware

5 Riavvitare la lastra metallica.

6. Una volta installata la scheda PCI Express, riavvitare il pannello esteriore del computer e accendere il computer.

NOTA BENE: non collegare nussun dispositivo alla scheda PCI Express finché l’installazione del driver non sarà completata.

7. Il nuovo programma di configurazione guidata avvierà e riconoscerà la scheda PCI Express.

8. Windows installerà automaticamente il driver corretto.

L’installazione è completata. La scheda PCI Express è pronta per l’uso.

IT

3

4

1

2

5

7

P74967ea_F5U602ea.indb 7 14/3/06 4:38:27 pm

3

4

1

2

5

Verifica dell’installazione

Verificare in “Gestione periferiche” che la scheda PCI

Express sia stata installata correttamente.

1. Cliccare con il tasto destro del mouse su “Risorse del computer” e selezionare “Gestione”.

2. Selezionare la scheda “Gestione periferiche”.

3. Fare clic sul segno “+” vicino a “IEEE 1394 Bus host controllers”. Nell’elenco “IEEE 1394 Bus host controllers” sarà ora compresa una voce per “Texas Instrument OHCI

Compliant IEEE 1394 Host Controller”.

4. Fare clic sul segno “+” vicino a “Universal Serial Bus controllers”. Ora l’elenco comprenderà due voci per “NEC

PCI to USB Open Host Controller” e una per “Standard

Enhanced PCI to USB Host Controller”.

P74967ea_F5U602ea.indb 8

8

14/3/06 4:38:27 pm

9

Verifica dell’installazione

3

4

1

2

5

8

P74967ea_F5U602ea.indb 9

9

IT

14/3/06 4:38:28 pm

3

4

1

2

5

Informazioni

Dichiarazione FCC

DICHIARAZIONE DI CONFORMITÀ ALLE NORMATIVE FCC PER LA

COMPATIBILITÀ’ ELETTROMAGNETICA

Noi sottoscritti, Belkin Corporation, con sede all’indirizzo West Walnut Street,

501, Compton, CA 90220, dichiariamo sotto la nostra piena responsabilità che il prodotto,

F5U602ea

, al quale questa dichiarazione fa riferimento,

è conforme alla Parte 15 delle normative FCC. Le due condizioni fondamentali per il funzionamento sono le seguenti: (1) il dispositivo non deve causare interferenze dannose e (2) il dispositivo deve accettare qualsiasi interferenza ricevuta, comprese eventuali interferenze che possano causare un funzionamento anomalo.

Dichiarazione di conformità CE

Noi, Belkin Corporation, dichiariamo sotto la nostra unica responsabilità che il prodotto F5U602, a cui si riferisce questa dichiarazione, è conforme allo standard generico sulle emissioni EN 55022:1998 Classe B e allo standard generico sull’immunità EN50082-1 1992.

Modifiche

Le indicazioni FCC prevedono che l’utente venga informato del fatto che eventuali variazioni o modifiche apportate a questo dispositivo non espressamente approvate da Belkin Corporation potrebbero annullare la facoltà dell’utente di utilizzare il dispositivo.

Prodotto garantito a vita da Belkin Corporation Limited

Belkin Corporation garantisce a vita questo prodotto da eventuali difetti di materiale e lavorazione. Qualora venisse rilevata un’anomalia, Belkin provvederà, a propria discrezione, a riparare o sostituire il prodotto gratuitamente, a condizione che esso sia restituito entro il periodo di garanzia, con le spese di trasporto prepagate, al rivenditore Belkin autorizzato da cui è stato acquistato. Potrebbe venire richiesta la prova di acquisto.

Questa garanzia non sarà valida nel caso il prodotto sia stato danneggiato accidentalmente, per abuso, uso non corretto o non conforme, qualora sia stato modificato senza il permesso scritto di Belkin, o nel caso il numero di serie Belkin fosse stato cancellato o reso illeggibile.

10

P74967ea_F5U602ea.indb 10 14/3/06 4:38:28 pm

11

10

Informazioni

LA GARANZIA E I RIMEDI DI CUI SOPRA PREVALGONO SU QUALSIASI ALTRO

ACCORDO, SIA ESSO ORALE, SCRITTO, ESPRESSO O IMPLICITO. BELKIN

DECLINA SPECIFICATAMENTE QUALSIASI OBBLIGO DI GARANZIA IMPLICITO,

COMPRESE, SENZA LIMITI, LE GARANZIE DI COMMERCIABILITÀ O IDONEITÀ AD

UN PARTICOLARE SCOPO.

Nessun rivenditore, agente o impiegato di Belkin è autorizzato ad apportare modifiche, ampliamenti o aggiunte alla presente garanzia.

BELKIN DECLINA QUALSIASI RESPONSABILITÀ PER EVENTUALI DANNI

SPECIFICI, ACCIDENTALI, INDIRETTI DOVUTI AD UN’EVENTUALE VIOLAZIONE

DELLA GARANZIA O IN BASE A QUALSIASI ALTRA FORMA DI TEORIA LEGALE,

COMPRESI, MA NON SOLO, I CASI DI MANCATO GUADAGNO, INATTIVITÀ,

DANNI O RIPROGRAMMAZIONE O RIPRODUZIONE DI PROGRAMMI O DATI

MEMORIZZATI O UTILIZZATI CON I PRODOTTI BELKIN.

Poiché alcuni Stati non consentono l’esclusione o la limitazione delle garanzie implicite o della responsabilità per i danni accidentali, i limiti di esclusione di cui sopra potrebbero non fare al caso vostro. Questa garanzia consente di godere di diritti legali specifici ed eventuali altri diritti che possono variare di stato in stato.

3

4

1

2

5

P74967ea_F5U602ea.indb 11

11

IT

14/3/06 4:38:29 pm

Scheda PCI Express ™ USB

2.0 e FireWire 800

Belkin Ltd.

Express Business Park

Shipton Way, Rushden

NN10 6GL, Regno Unito

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, Paesi Bassi

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax

Assistenza tecnica Belkin

Europa: 00 800 223 55 460

Belkin GmbH

Hanebergstrasse 2

80637 Monaco di Baviera, Germania

+49 (0) 89 143405 0

+49 (0) 89 143405 100 fax

Belkin SAS

130 rue de Silly

92100 Boulogne-Billancourt, Francia

+33 (0) 1 41 03 14 40

+33 (0) 1 41 31 01 72 fax

© 2006 Belkin Corporation. Tutti i diritti riservati. Tutti i nomi commerciali sono marchi registrati dai rispettivi produttori. FireWire è un marchio registrato dalla Apple Computer, Inc., negli USA e in altri

Paesi. PCI Express è un marchio registrato dalla PCMCIA.

P74967ea

P74967ea_F5U602ea.indb 12 14/3/06 4:38:29 pm

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals