Belkin NetCam F7D7601v1 User's Manual

Add to my manuals
36 Pages

advertisement

Belkin NetCam F7D7601v1 User's Manual | Manualzz
Wi-Fi® Camera with Night Vision
NETCAM
User Manual
F7D7601V1 • 8820-01175 Rev. B00
TABLE OF CONTENTS
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Troubleshooting, Support, and Warranty . . . . . . . . . . . . . . . . . . . . . . . . 28
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Set Up Your Camera Wirelessly Through Your Mobile Devices . . . . . . . . . . 2
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Belkin International, Inc., Limited 2-Year Product Warranty . . . . . . . . . . . . 30
Getting to Know Your Wi-Fi Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Software Features and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Hardware Features and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Resetting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
GETTING STARTED
Initial Setup
Congratulations on buying a Belkin NetCam. This
device will enable you to easily check in on your
home and your loved ones when you are away.
To get started, you will need:
What’s in the Box
• Your wireless router, its network name (SSID),
and password.
NetCam
• An Android™ device (Version 2.2 or later) or an iPhone,
iPad, or iPod touch (iOS Version 4.1 or later).
Power Supply
Quick Installation Guide
Mounting Kit
1
GETTING STARTED
Set Up Your Camera Wirelessly Through Your
Mobile Devices
2. Switch the NetCam to Setup Mode by flipping up the switch on the
back of the camera
1. Plug the NetCam into a power outlet
Please make sure the switch is
in setup mode and the
Wi-Fi light is blinking.
2
GETTING STARTED
3. Download the NetCam App from the App Store or Google Play
4. Set Up on iPhone, iPad, or iPod touch
4.1 Connect your mobile device to NetCam Wi-Fi signal
Go to “Settings > Wi-Fi” on your iPhone/iPad/iPod touch
and connect to the camera’s Wi-Fi signal.
3
GETTING STARTED
4.2 Launch the NetCam App
4.3 Camera Setup
Once your device establishes a connection with the camera,
launch the NetCam App. You should see a pop-up message
like the one below. Click “Yes” to set up your camera.
Click “Continue” to begin setup.
4
GETTING STARTED
4.4 Camera Preview
4.5 Connect to Internet
The camera will show you a preview after successfully connecting
to your device.
Choose your Wi-Fi network to connect to the Internet.
Click “Connect Camera to Internet.”
You may also choose to connect to your network via Ethernet
cable (not included) by clicking “Ethernet.”
5
GETTING STARTED
4.6 Connect to Internet
Please wait for the camera to establish connection with
the Internet.
Enter your Wi-Fi password if you have a security-enabled network.
6
GETTING STARTED
4.7 Create an Account
4.8 Use Existing Account
If this is your first time setting up your camera, you will need
to create an account.
If you have an existing account, select “Use Existing”
and then enter your account information. Click “Sign in.”
7
GETTING STARTED
4.9 Set Up Camera Info
Click “Continue.” It will take a few seconds to register the
camera with the server.
Create the camera name and its description.
8
GETTING STARTED
Congratulations !
4.10 Setup Complete
Please flip the setup switch down on the back of the NetCam. Click
“Finish” to complete the setup.
9
GETTING STARTED
5. Set Up on Android Devices
5.2 Launch NetCam App!
5.1 Connect your device to NetCam Wi-Fi signal
Once your device establishes a connection with the camera, launch
the NetCam App. You should see a pop-up message like the one below.
Click “Yes” to set up your camera.
Go to “Settings > Wireless” and “Network > Wi-Fi settings”
and connect to the camera Wi-Fi signal.
10
GETTING STARTED
5.3 Camera Setup
5.4 Camera Preview
Click “Continue” to begin setup.
The camera will show you a preview after successfully connecting to
your device. Click “Connect camera to Internet.”
11
GETTING STARTED
5.5 Connect to the Internet
5.6 Connect to Internet
Choose your Wi-Fi network to connect to the Internet.
Enter your Wi-Fi password if you have a security-enabled network.
You may also choose to connect to your network via Ethernet cable
(not included) by clicking “Ethernet.”
12
GETTING STARTED
Please wait for the camera to establish an Internet connection.
5.7 Create an Account
If this is your first time setting up your camera, you will need to create
an account.
13
GETTING STARTED
5.8 Use Existing Accounts
5.9 Set Up Camera Info
If you have an existing account, select “Use Existing” and then enter
your account information. Click “Sign in.”
Create the camera name and its description.
14
GETTING STARTED
Click “Continue.” It will take a few seconds to register the camera
with the server.
5.10 Setup Complete
Please flip the setup switch down on the back of the NetCam.
Click “Finish” to complete the setup.
15
GETTING STARTED
Congratulations!
16
GETTING STARTED
6. Mounting Your Camera (optional)
Unscrew camera post from the base and remove weight.
Attach screws to wall and hang plate onto screws.
1/8 in. or 5.5mm
2.5mm
17
GETTING STARTED
Align base with plate and screw on camera post.
18
GETTING TO KNOW YOUR Wi-Fi CAMERA
Front Panel
A: Brightness sensor
B: Camera sensor
C: IR LED
D: Microphone
19
GETTING TO KNOW YOUR Wi-Fi CAMERA
Back Panel
B:
Network
Green: Connected to server
Amber: Connected to local area network only
Flashing Amber: Not connected to any network
Flashing Green: Connected to network, ready to set up
C:
Power
Green: Power On
D: RJ45 port:
Can be used for wired setup and for a wired connection with the
router while using the NetCam.
E: Camera holder
You can adjust the NetCam’s position by adjusting the holder.
F: Reset button
Reset System: Press and hold for 1 second to reset the system.
Factory Default: Press and hold for 20 seconds to restore factory
default settings.
LED Indicators
A:
G: Setup switch
Setup
Green: Setup up mode on
Amber: Setup mode initializing
Light Off: Setup mode off
Flip up to switch to setup mode.
Flip down to switch to camera mode.
20
TECHNICAL DETAILS
Technical Features
• User account management
• Create new user account
• Reset password
Software Features and Specifications
App on iOS or Android
• Camera setup
• Live camera viewing
• Save snapshot and video from the live stream
• Live one-way audio
• Camera settings
• Enable/disable email alert
• Camera sharing
• Set camera status (online, offline, private)
• Video stream (Frame rate, video resolution, quality)
• General settings
• Reset password
• Sign in automatically
• Invite friends to view your camera
Web App
• Live camera viewing
• L ive audio on selected PC web browsers (Internet Explorer®,
Firefox®, and Google Chrome™)
• Camera settings
• Camera firmware upgrade
• Delete camera
• Invite friends to view your camera
• Enable/disable email alert
21
TECHNICAL DETAILS
Main Window
Camera Configuration
• Name: Name of your camera
• Share/unshare: Make your camera public to your friends or not.
• Status: Change camera status to be online, offline, or private.
• Rotation: Select Normal or Flipped Vertically on the videos.
• IR: Select “Auto,” “On,” or “Off” of IR LEDs.
• Frame Rate: Up to 30fps
• Quality: 1-5 (Best = 5)
Configure
Camera
• Video Size: 160x120, 320x240, 640x480.
• Microphone > Enable/Disable Microphone
• Email alert > Enable/Disable email alert
22
TECHNICAL DETAILS
Camera Viewer
Take a
Snapshot
Record
Video
Enable
Microphone
23
TECHNICAL DETAILS
Protection
Web Browser
Access this link via Internet Explorer, Netscape, Firefox,
or Google Chrome: http://www.belkin.com/netcam
To protect your security against a hacker, a popup message will alert you if someone else is logged
into your account at the same time as you.
Then you can view the camera via your PC.
24
TECHNICAL DETAILS
Hardware Features and Specifications
Camera
Image Sensor
VGA 1/4 inch CMOS sensor
Lens
Focal length: 3.1mm, F2.6
View Angle
Horizontal: 64°
Vertical: 48°
Diagonal: 80°
IR LEDs
8 IR LEDs, 850nm
8-meter illumination distance
IR Mode
Always on
Always off
Auto mode
● IR turns on when luminance
decreases to about 3 lux
● IR turns off when luminance
increases to about 8 lux
Ambient Light Sensor
Still Image Capture
Support VGA and 0.3MP
resolution JPEG still capture
Video Features
Adjust image size and quality
Flip and mirror image
Audio
Audio In
Built-in microphone, -38 dB ± 2 dB
Audio Compression
G.711, PCM
Networking
RoHS-compliant 560nm luminance
detector
Network Interface
10/100Base-TX Fast Ethernet
802.11b/g/n WLAN
Wireless Connectivity
802.11b/g/n Wireless with
WEP/WPA/WPA2 security
Radio Specifications
RF band: ISM Band 2.4GHz
Channels: Varies by country
RF Power Output
● 802.11n: 14 ± 1 dBm Average
● 802.11g: 14 ± 1 dBm Average
● 802.11b: 16 ± 1 dBm Average
Antenna
Type: Chip antenna, SMD
Gain: 1.3 dBm peak
Efficiency: above 65%
Video
Codecs
MJPEG, JPEG for still images
Resolution
160x120, 320x240, 640x480
Frame Rate
Up to 30 frames
25
TECHNICAL DETAILS
Power
General
System
Processor: RT5350
Speed: 360MHz
DRAM: 64MB
Flash: 8MB
Button
Reset Button
● Reset system: Press less than 1
second to reset the system
● Factory default: Press and hold 20 seconds to restore the factory
default settings
Switch
Setup mode switch: Turn
setup mode on and off
LEDs
Setup Mode LED
● Solid Green: Setup Mode on
● Amber: In progress to switch to
Setup Mode
● No light: Setup Mode off
Network LED
● Solid Amber: Local network ok
● Solid Green: Connection to
Internet ok
● Flashing Amber: No network yet
● Flashing Green: Global Internet ok
System LED
● Solid Green: System on
26
External AC-to-DC switching
power adapter
Input: 100-249V AC, 50/60Hz,
Output: 5V DC, 1A
TECHNICAL DETAILS
System Requirements
Resetting the Camera
iPhone, iPad, or iPod touch with iOS 4.1 or above or Android
smart devices Version 2.2 or above
The “Reset” button is used in rare cases. In the unlikely event
that your camera functions improperly, please use a pin to
reset the camera. The Reset button is where the arrow below
points. Reset the camera when the switch is in “OFF” mode.
After the reset, the camera will resume to the default setting.
PC OS: Windows® XP, Windows Vista®, or Windows 7, or
Mac OS® X v10.6.8 Snow Leopard
PC browsers: Internet Explorer 8, Google Chrome 16, Firefox
11.1, Safari® 5.1 Using the latest Adobe Flash Player
• R
eset system: Press and hold for 1 second to reset
the system
• R eset to factory default: Press and hold for 20 seconds
to restore the factory default settings
27
TROUBLESHOOTING, SUPPORT, AND WARRANTY
If I buy more cameras, could I use the same username to
connect them?
How can I share my cameras with my friends?
Log in to your account. Under the camera configuration,
find the “Sharing” icon. Type in your friends’ email
addresses to invite them to see your camera.
Unlimited cameras can be added under your own account, but
each one should have a different camera name. The figure below
shows that you can have different cameras under your account.
28
TROUBLESHOOTING, SUPPORT, AND WARRANTY
How can I upgrade the firmware?
Can I change my username?
Access your NetCam’s account from a web browser. Under the
camera configuration, a screen will pop up like the one below. Click
“Update Now.” It will take about 5~10 minutes to upgrade the new
firmware.
Your username is what identifies your account information,
and once set, it cannot be changed. If you later do not like your
username, the only recourse is to create a new account. Please
note that any subscription services registered in the old account
(if applicable) cannot be transferred to the new account.
Forgot or lost your password?
The NetCam App login screen has a link labeled “Forgot your
password?” that takes you to the account sign-in webpage. Type
in your username and email address, and then click the Reset
button to begin the process of setting up a new password.
Technical Support
US
http://www.belkin.com/support
29
TROUBLESHOOTING, SUPPORT, AND WARRANTY
Belkin International, Inc., Limited 2-Year Product Warranty
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin determines that the Belkin product
has been improperly installed, altered in any way, or tampered with.
The Belkin Product Warranty does not protect against acts of God
such as flood, lightning, earthquake, war, vandalism, theft, normal-use
wear and tear, erosion, depletion, obsolescence, abuse, damage due
to low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original
purchaser of this Belkin product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for two years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product). Belkin reserves the
right to discontinue any of its products without notice, and disclaims any
limited warranty to repair or replace any such discontinued products.
In the event that Belkin is unable to repair or replace the product (for
example, because it has been discontinued), Belkin will offer either a
refund or a credit toward the purchase of another product from Belkin.
com in an amount equal to the purchase price of the product as evidenced
on the original purchase receipt as discounted by its natural use.
30
TROUBLESHOOTING, SUPPORT, AND WARRANTY
How to get service.
To get service for your Belkin product you must take the following steps:
2.Your Belkin Customer Service Representative will then
instruct you on how to forward your receipt and Belkin
product and how to proceed with your claim.
1. Contact Belkin International, Inc., at 12045 Waterfront
Drive, Los Angeles, CA 90094, Attn: Customer Service,
or call (800)-223-5546, within 15 days of the Occurrence.
Be prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
Belkin reserves the right to review the damaged Belkin product. All
costs of shipping the Belkin product to Belkin for inspection shall be
borne solely by the purchaser. If Belkin determines, in its sole discretion,
that it is impractical to ship the damaged equipment to Belkin, Belkin
may designate, in its sole discretion, an equipment repair facility to
inspect and estimate the cost to repair such equipment. The cost, if
any, of shipping the equipment to and from such repair facility and
of such estimate shall be borne solely by the purchaser. Damaged
equipment must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be subrogated
under any existing insurance policies the purchaser may have.
31
TROUBLESHOOTING, SUPPORT, AND WARRANTY
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES
SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS
ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do
not allow the exclusion or limitation of incidental, consequential, or
other damages, so the above limitations may not apply to you.
32
REGULATORY INFORMATION
DECLARATION OF CONFORMITY WITH FCC RULES
FOR ELECTROMAGNETIC COMPATIBILITY
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa
Vista, CA 90094, declare under our sole responsibility that the device,
F7D7601v1, complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
F CC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate this equipment.
FCC Statement
Federal Communication Commission Interference Statement
IMPORTANT NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20cm between the radiator
and your body.
This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
33
© 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers
listed. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. iPad, iPhone, iPod touch, Mac OS, and Safari are trademarks of
Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wi-Fi is a registered trademark
of the Wi-Fi Alliance. Android, Google Chrome, and Google Play are trademarks of Google Inc. registered trademark of the
Wi-Fi Alliance. Android, Google Chrome, and Google Play are trademarks of Google Inc.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement