Technical

Bulletin

Bulletin No.: PRO-07-03 Effective Date: 9/8/77 Cancels: PRO-07-03 dated 4/5/77 Page: 1 of 1

Subject:

7/16” Hose & Hose Assemblies Replacement of ½” Hose

Many OE vehicle manufacturers are using ½” I.D. hose on 121 vehicles, and a question has been raised concerning replacement of ½” I.D. hose with HVSG 7/16” I.D. hose.

This is to advise that HVSG Engineering has approved the replacement of ½” I.D. hose with 7/16” I.D. hose and, therefore, substitution may be made without exception.