Bosch Appliances Home Security System LTC 8785 User's Manual

LTC 8785 Series
Instruction Manual
EN Code Converter Units
LTC 8785 Series | Instruction Manual | Important Safeguards
EN | 2
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety
and operating instructions should be read and
followed before operating the unit. Retain instructions
for future reference.
2. Heed Warnings - Adhere to all warnings on the unit
and in the operating instructions.
3. Attachments - Attachments not recommended by
the product manufacturer should not be used, as they
may cause hazards.
4. Installation Cautions - Do not place this unit on an
unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury to a person and
serious damage to the unit. Use only manufacturerrecommended accessories, or those sold with the
product. Mount the unit per the manufacturer's
instructions. Appliance and cart combination should
be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Cleaning - Unplug the unit from the outlet before
cleaning. Follow any instructions provided with the
unit. Generally, using a damp cloth for cleaning is
sufficient. Do not use liquid cleaners or aerosol
cleaners.
6. Servicing - Do not attempt to service this unit
yourself. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Damage Requiring Service - Unplug the unit from
the main AC power source and refer servicing to
qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen
into the unit.
• If the unit has been exposed to water and/or
inclement weather (rain, snow, etc.).
• If the unit does not operate normally, when
following the operating instructions. Adjust only
those controls specified in the operating
instructions. Improper adjustment of other controls
may result in damage, and require extensive work
by a qualified technician to restore the unit to
normal operation.
• If the unit has been dropped or the cabinet
damaged.
• If the unit exhibits a distinct change in
performance, this indicates that service is needed.
8. Replacement Parts - When replacement parts are
required, the service technician should use
replacement parts specified by the manufacturer or
that have the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electrical shock or other hazards.
9. Safety Check - Upon completion of servicing or
repairs to the unit, ask the service technician to
perform safety checks to ensure proper operating
condition.
Bosch Security Systems | 19 April 2004
10. Power Sources - Operate the unit only from the type
of power source indicated on the label. If unsure of
the type of power supply to use, contact your dealer
or local power company.
• For units intended to operate from battery power,
refer to the operating instructions.
• For units intended to operate with External Power
Supplies, use only the recommended approved
power supplies.
• For units intended to operate with a limited power
source, this power source must comply with
EN60950. Substitutions may damage the unit or
cause fire or shock.
• For units intended to operate at 24VAC, normal
input voltage is 24 VAC. Voltage applied to the
unit's power input should not exceed 30VAC. Usersupplied wiring, from the 24VAC supply to unit,
must be in compliance with electrical codes (Class
2 power levels). Do not ground the 24VAC supply
at the terminals or at the unit's power supply
terminals.
11. Coax Grounding - If an outside cable system is
connected to the unit, ensure that the cable system is
grounded. U.S.A. models only - Section 810 of the
National Electrical Code, ANSI/NFPA No.70,
provides information regarding proper grounding of
the mount and supporting structure, grounding of the
coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
12. Grounding or Polarization - This unit may be
equipped with a polarized alternating current line
plug (a plug with one blade wider than the other).
This safety feature allows the plug to fit into the
power outlet in only one way. If unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug still fails to fit, contact an electrician to arrange
replacement of the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a
3-wire grounding plug (a plug with a third pin, for
grounding). This safety feature allows the plug to fit
into a grounding power outlet only. If unable to insert
the plug into the outlet, contact an electrician to
arrange replacement of the obsolete outlet. Do not
defeat the safety purpose of the grounding plug.
13. Lightning - For added protection during a lightning
storm, or when this unit is left unattended and
unused for long periods of time, unplug the unit from
the wall outlet and disconnect the cable system. This
will prevent damage to the unit due to lightning and
power line surges.
EN | 3
LTC 8785 Series | Instruction Manual | Safety Precautions
For Indoor Product
1. Water and Moisture - Do not use this unit near
water - for example, in a wet basement, in an
unprotected outdoor installation or in any area
classified as a wet location.
2. Object and Liquid Entry - Never push objects of
any kind into this unit through openings, as they
may touch dangerous voltage points or short out
parts that could result in a fire or electrical shock.
Never spill liquid of any kind on the unit.
3. Power Cord and Power Cord Protection - For
units intended to operate with 230VAC, 50Hz,
the input and output power cord must comply
with the latest versions of IEC Publication 227 or
IEC Publication 245.
Power supply cords should be routed so they are
not likely to be walked on or pinched. Pay
particular attention to location of cords and plugs,
convenience receptacles, and the point of exit
from the appliance.
4. Overloading - Do not overload outlets and
extension cords; this can result in a risk of fire or
electrical shock.
For Outdoor Product
Power Lines - An outdoor system should not be
located in the vicinity of overhead power lines,
electric lights or power circuits, or where it may
contact such power lines or circuits. When
installing an outdoor system, extreme care should
be taken to keep from touching power lines or
circuits, as this contact might be fatal. U.S.A.
models only - refer to the National Electrical
Code Article 820 regarding installation of CATV
systems.
For Rack-mount Product
1. Ventilation - This unit should not be placed in a
built-in installation or rack, unless proper
ventilation is provided, or the manufacturer’s
instructions have been adhered to. The
equipment must not exceed its maximum
operating temperature requirements.
2. Mechanical Loading - Mounting of the
equipment in a rack shall be such that a
hazardous condition is not achieved due to
uneven mechanical loading.
Bosch Security Systems | 19 April 2004
Safety Precautions
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the presence of
uninsulated “dangerous voltage” within the
product’s enclosure. This may constitute a
risk of electric shock.
The user should consult the operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Attention: Installation should be performed by
qualified service personnel only in accordance
with the National Electrical Code or applicable
local codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source; however, the unit is operational
only when the ON-OFF switch is in the ON
position. The power cord is the main power
disconnect for all units.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE
DEVICES
WARNING:
Electrostatic-sensitive device. Use
proper CMOS/MOSFET handling
precautions to avoid electrostatic
discharge.
NOTE: Grounded wrist straps must be worn and proper ESD
safety precautions observed when handling the electrostaticsensitive printed circuit boards.
EN | 4
LTC 8785 Series | Instruction Manual | FCC & ICES Information
FCC & ICES INFORMATION
Sicherheitshinweise
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer, or an experienced radio/TV technician for
help.
Intentional or unintentional changes or modifications, not
expressly approved by the party responsible for compliance, shall
not be made. Any such changes or modifications could void the
user’s authority to operate the equipment.The user may find the
following booklet, prepared by the Federal Communications
Commission, helpful: How to Identify and Resolve Radio-TV
Interference Problems. This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402, Stock No.
004-000-00345-4.
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT
ZU ENTFERNEN. ES BEFINDEN SICH KEINE TEILE IN DIESEM
BEREICH, DIE VOM BENUTZER GEWARTET WERDEN
KÖNNEN. LASSEN SIE WARTUNGSARBEITEN NUR VON
QUALIFIZIERTEM WARTUNGSPERSONAL AUSFÜHREN.
Das Symbol macht auf nicht isolierte „gefährliche Spannung"
im Gehäuse aufmerksam. Dies kann zu einem elektrischen
Schlag führen.
Der Benutzer sollte sich ausführlich über Anweisungen für
die Bedienung und Instandhaltung (Wartung) in den
begleitenden Unterlagen informieren.
Achtung! Die Installation sollte nur von qualifiziertem
Kundendienstpersonal gemäß jeweils zutreffender
Elektrovorschriften ausgeführt werden.
Unterbrechung des Netzanschlusses. Geräte mit oder ohne
Netzschalter haben Spannung am Gerät anliegen, sobald der
Netzstecker in die Steckdose gesteckt wird. Das Gerät ist jedoch
nur betriebsbereit, wenn der Netzschalter (EIN/AUS) auf EIN
steht. Wenn das Netzkabel aus der Steckdose gezogen wird, ist
die Spannungszuführung zum Gerät vollkommen unterbrochen.
Precauciones de Seguridad
Sécurité
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU
PRECAUCIÓN: PARA DISMINUIR EL RIESGO DE DESCARGA
ELÉCTRICA, NO RETIRE LA CUBIERTA (NI LA PARTE
POSTERIOR). NO EXISTEN PIEZAS DE RECAMBIO EN EL
INTERIOR DEL EQUIPO. EL PERSONAL DE SERVICIO
CUALIFICADO SE ENCARGA DE REALIZAR LAS
REPARACIONES.
ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT
SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ
LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ.
Ce symbole signale que le produit renferme une « tension
potentiellement dangereuse » non isolée susceptible de
provoquer une électrocution.
Ce symbole invite l'utilisateur à consulter les instructions
d'utilisation et d'entretien (dépannage) reprises dans la
documentation qui accompagne l'appareil.
Attention : l'installation doit exclusivement être réalisée par du
personnel qualifié, conformément au code national d'électricité
américain (NEC) ou au code d'électricité local en vigueur.
Coupure de l'alimentation. Qu'ils soient pourvus ou non d'un
commutateur ON/OFF, tous les appareils reçoivent de l'énergie une
fois le cordon branché sur la source d'alimentation. Toutefois,
l'appareil ne fonctionne réellement que lorsque
le commutateur est réglé sur ON. Le débranchement du cordon
d'alimentation permet de couper l'alimentation des appareils.
Bosch Security Systems | 19 April 2004
Este símbolo indica que existen puntos de tensión peligrosos
sin aislamiento dentro de la cubierta de la unidad. Estos
puntos pueden constituir un riesgo de descarga eléctrica.
El usuario debe consultar las instrucciones de funcionamiento y
mantenimiento (reparación) en la documentación que se
suministra con el aparato.
Atención: la instalación la debe realizar únicamente personal
cualificado de conformidad con el National Electric Code o las
normas aplicables en su país.
Desconexión de la alimentación. Las unidades con o sin
interruptores de encendido/apagado reciben alimentación
eléctrica siempre que el cable de alimentación esté conectado a
la fuente de alimentación. Sin embargo, la unidad sólo funciona
cuando el interruptor está en la posición de encendido. El cable
de alimentación es la principal fuente de desconexión de todas
las unidades.
EN | 5
LTC 8785 Series | Instruction Manual | FCC & ICES Information
Veiligheidsmaatregelen
VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT
VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO
OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT
BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT
REPAREREN. LAAT SERVICE EN ONDERHOUD UITVOEREN
DOOR GEKWALIFICEERD PERSONEEL.
Medidas de Segurança
CUIDADO: PARA REDUZIR O RISCO DE CHOQUE
ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE
POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE
POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A
ASSISTÊNCIA PARA OS TÉCNICOS QUALIFICADOS.
Dit symbool geeft aan dat er binnen in het apparaat
ongeïsoleerde, gevaarlijke spanning aanwezig is die mogelijk
elektrische schokken kan veroorzaken.
Este símbolo indica a presença de "tensão perigosa" não isolada
dentro da estrutura do produto, o que pode constituir risco de
choque eléctrico.
De gebruiker dient de bedienings- en onderhoudsvoorschriften
te raadplegen in de documentatie die werd meegeleverd met
het apparaat.
O utilizador deve consultar as instruções de funcionamento
e manutenção (assistência) nos documentos que
acompanham o aparelho.
Attentie: het apparaat mag alleen door gekwalificeerd personeel
worden geïnstalleerd. De installatie dient in overeenstemming
met de nationale elektrische richtlijnen of de van toepassing
zijnde lokale richtlijnen te worden uitgevoerd.
Spanning uitschakelen. Apparatuur met of zonder
aan-uitschakelaar staat onder spanning zolang de stekker is
aangesloten op de wandcontactdoos. De apparatuur is uitsluitend
in werking als de aan-uitschakelaar aan staat. Het netsnoer is de
"hoofdschakelaar" voor alle apparatuur.
Sicurezza
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE
ELETTRICHE NON RIMUOVERE LA COPERTURA (O IL
PANNELLO POSTERIORE). L'UNITÀ NON CONTIENE
COMPONENTI INTERNI RIPARABILI DALL'UTENTE. PER
QUALSIASI INTERVENTO, RIVOLGERSI A PERSONALE
TECNICO QUALIFICATO.
Questo simbolo indica la presenza di "tensione pericolosa" non
isolata all'interno del contenitore del prodotto. Ciò comporta un
potenziale rischio di scosse elettriche.
Si consiglia di consultare le istruzioni operative e di
manutenzione (interventi tecnici) contenute nella
documentazione fornita con il dispositivo.
Attenzione: l'installazione deve essere effettuata esclusivamente
da personale tecnico qualificato in conformità con il National
Electrical Code o con le normative locali vigenti.
Scollegamento dell'alimentazione. Le unità dotate o sprovviste di
interruttori ON-OFF vengono alimentate quando si inserisce il
cavo nella presa dell'alimentazione. L'unità è tuttavia in funzione
solo quando l'interruttore ON-OFF si trova nella posizione ON. Il
cavo di alimentazione costituisce il dispositivo di scollegamento
dell'alimentazione principale per tutte le unità.
Bosch Security Systems | 19 April 2004
Atenção: a instalação deve ser executada apenas por técnicos
qualificados da assistência, de acordo com o código eléctrico
nacional ou os códigos locais aplicáveis.
Corte de corrente. As unidades com ou sem interruptores
ON-OFF (ligar/desligar) recebem corrente sempre que o fio de
alimentação está introduzido na fonte de alimentação; contudo, a
unidade apenas está operacional quando o interruptor ON-OFF
está na posição ON. O fio de alimentação destina-se a desligar a
corrente em todas as unidades.
LTC 8785 Series | Instruction Manual | Contents
EN | 6
Table of Contents
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1
4.2
4.3
4.4
5
6
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
ILLUSTRATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Bosch Security Systems | 19 April 2004
EN | 7
LTC 8785 Series | Instruction Manual | Unpacking
1
UNPACKING
Unpack carefully. This is electronic equipment and
should be handled carefully.
Check for the following items:
• Verify the model number of the unit
• One (1) cable with 9-pin D-sub connectors
• Connector Kit, containing eight (8) pieces of a
twelve (12) pin connector
• Installation manual
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, notify your Bosch Security
Systems, Inc. Sales Representative or Customer
Service.
The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.
2
SERVICE
If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems, Inc.
Service Center for return authorization and shipping
instructions.
Service Centers
USA
Phone:
800-366-2283 or 717-735-6638
fax:
800-366-1329 or 717-735-6639
CCTV Spare Parts
Phone:
800-894-5215 or 408-956-3853 or 3854
fax:
408-957-3198
e-mail:
BoschCCTVparts@ca.slr.com
Canada
Phone:
514-738-2434
Europe, Middle East & Asia Pacific Region
Phone:
32-1-440-0711
For additional information, see
www.boschsecuritysystems.com.
Bosch Security Systems | 19 April 2004
3
DESCRIPTION
The LTC 8785 Series are control code converters that
convert Allegiant® series “variable speed” biphase
control codes into “fixed speed” biphase control codes.
When AutoDome® pan/tilt/zoom cameras are added to
existing Allegiant systems, it is usually preferable to
operate them in their variable speed mode. The
LTC 8553/00 and LTC 8555/00 keyboards containing
proportional joysticks must be added to the system
along with an upgrade of the system CPU so the new
variable speed control codes can be generated. If the
existing system contains older type TC8561 Series
receiver/drivers, there will be a code compatibility
problem. The older TC8561 Series receiver/drivers
were only designed to operate using “fixed speed”
control codes and will not function when the newer
variable speed codes are being received. To solve this
problem, the LTC 8785 Series code converters have
been designed to maintain a source of “fixed speed”
control codes in this type of system.
The LTC 8785 Series provide 32 separate outputs for
driving up to 256 existing TC8561 Series
Receiver/Drivers. Either “star" or “daisy chain" wiring
configurations may be used. Each output is capable of
driving up to 8 receiver/drivers in a “daisy chain”
configuration up to 1500 meters (5000 ft) using 1 mm2
(Belden 8760 or equivalent 18 AWG) shielded twisted
pair. A 2 meter (6 ft) data cable for interface to the
existing Allegiant LTC 8568/00 Signal Distribution
Unit is supplied. The unit will also accept control code
supplied from LTC 8569 Series, LTC 8571 Series, or
LTC 8572 Series Code Merger units.
EN | 8
LTC 8785 Series | Instruction Manual | Installation
4
INSTALLATION
4.1
Power
•
Connect the conductor corresponding to pin 1
to a “+” terminal of the LTC 8568/00 output;
pin 2 connects to a “-” output, and pin 3 to a
“S” output. If necessary, a shielded-twisted pair
cable can be used to extend the data line
between an output of the LTC 8568/00 and the
input to the LTC 8785 Series.
•
Install the AC power cord to the appropriate
power source. The POWER LED on the code
converter unit’s front panel should light when
power is applied.
Model No.1
Rated Voltage
Voltage Range Power2
LTC 8785/60 120 VAC, 50/60 Hz
108 to 132 12 W
LTC 8785/50 220-240 VAC,50/60 Hz 198 to 264 12 W
1
These units may be supplied with grounded power cords;
grounding should not be defeated.
2
Nominal power at rated voltage.
4.2
Procedure
Refer to ILLUSTRATIONS as necessary per the
following instructions.
If possible, install the LTC 8785 Series close enough to
the existing LTC 8568/00 Signal Distribution Unit
(or LTC 8569 Series Code Merger) so that the supplied
2 meter (6 ft) data cable will reach one of the outputs
of the LTC 8568/00 unit. The data output cables
corresponding to the older TC8561 Series
Receiver/drivers will need to be removed from the
existing LTC 8568/00 and connected to the outputs
of the LTC 8785 Series. The older LTC 8568/00
mating connector blocks can be connected directly to
the connectors on the rear panel of the new LTC 8785
Series. If necessary, the shielded-twisted pair cables
can be removed from the older connectors and wired
directly to the new connectors.
If these units are placed at a more distant location, the
data output cables for the receiver/drivers will need to
be extended or re-routed appropriately to the new site.
The data input to the LTC 8785 Series are made to the
9 pin D-connector on the rear panel. The supplied
data cable must be prepared so it can be used to
connect to an output of the existing LTC 8568/00
Signal Distribution Unit.
•
Prepare the data cable by cutting off the end
of the cable containing the male 9-pin Dconnector.
•
Locate the three conductors corresponding to
Data + (pin 1), Data - (pin 2), and Shield (pin
3).
•
Strip the ends of the three conductors
approximately 6 to 7 mm (1/4 in) so they can be
connected to one of the output terminal blocks
of the existing LTC 8568/00 unit.
Bosch Security Systems | 19 April 2004
4.3
Cover Removal
WARNING: Removal of the cover should only
be performed by qualified service personnel-not user serviceable. The unit should always
be unplugged, before removing the cover and
remain unplugged while the cover is removed.
4.4
Mounting Options
4.4.1 Rack Mount
The units are supplied from the factory in an enclosure
suitable for rack mounting in an EIA 19-inch rack. The
enclosure is one EIA standard rack width (19 in) by
two rack units high (3 1/2 in). Peel off the four rubber
feet located on the bottom of the enclosure before
installing it into a console.
4.4.2 Desk Top Mount
If the unit is not going to be rack mounted, the
enclosure’s mounting ears should be removed. The
cover of the unit must be removed before access to the
mounting ears is possible. Removal of the cover should
only be performed by qualified service personnel. The
unit should always be disconnected from the AC
power source before removing the cover.
The top cover is fastened to the case by four screws
located on the rear of the unit. Once the screws have
been removed, the cover slides back and off the unit.
Remove each mounting ear by removing the screw
holding the mounting ear to the enclosure chassis. See
Figure 1.
EN | 9
LTC 8785 Series | Instruction Manual | Operation
S929A39AE
Figure 1 Cover and Rack Ears Removal
5
OPERATION
No adjustments or settings within the LTC 8785 Series
units are necessary. The CODE LED on the LTC 8785
Series front panel should light when control code is
being converted and generated.
6
ILLUSTRATIONS
CODE
POWER
Front Panel
+
S
-
+
S
-
+
S
-
+
S
-
+
S
-
+
S
-
+
S
-
+
S
-
+
S
-
+
S
+
S
+
S
+
S
+
S
+
S
+
S
+
S
+
S
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
+
S
+
S
-
CODE IN
Rear Panel
Typical
Code Output
Mating Connector
(Removable Screw
Terminal Block)
+ Code Output
Shield
- Code Output
Duplicate of Above
AC Cord
9 Pin D Connector Pinouts
1 Data Code + Input
2 Data Code - Input
3 Shield
4 to 9 No Connection
Duplicate of Above
S9511002AE
Duplicate of Above
Figure 2 LTC 8785 Series Front and Rear Panel Views
Bosch Security Systems | 19 April 2004
EN | 10
LTC 8785 Series | Instruction Manual | Illustrations
Existing Allegiant Series Video
Switcher/Controller System
Upgrade to CPU Software
Version 5.5 or Higher
LTC 8553/00 Variable
Speed Keyboard
Control Code
Data Cable Supplied
with LTC 8568/00 Unit
32 Separate
Data Outputs
CODE
POWER
LTC 8568/00 Front Panel View
Existing LTC 8568/00
Signal Distribution Unit
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
CODE IN
To Allegiant
Series System
Video Inputs
Shielded Twisted Pair Cable
up to 1.5 km (5000 ft)
Variable Speed and/or Fixed Speed
Biphase Control Codes Go to New
LTC 8561 Series, LTC 8566 Series
Receiver/Drivers, AutoDome Camera
Sites, and TC8785 Series
Code Converter Unit
Control Cable
Data Cable
Supplied with
LTC 8785
Series Unit
Camera Pan/Tilt
LTC 8561 Series
LTC 8566 Series
Receiver
Driver
Video Coax
AutoDome
Series Camera
LTC 8785 Series Code Converter
+
S
+
S
+
S
+
S
-
32 Separate
Data Outputs
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
+
S
+
S
+
S
+
S
-
CODE
POWER
....
LTC 8785 Series Front Panel View
AC Line
Cord
Variable Speed Biphase Control Codes
are Converted by the LTC 8785 Series Units
into Appropriate Fixed Speed Control Codes
So Existing TC8561 Series Receiver/Drivers
Will Operate Normally
Only Fixed Speed Biphase
Control Codes Go to Existing TC8561
Series Receiver/Drivers
Older TC8561 Series Receiver/Drivers
are Only Capable of Responding to
Fixed Speed Biphase Control Codes
Existing
TC8561
Series
Receiver/
Shielded Twisted Pair Cable Drivers
up to 1.5 km (5000 ft)
S9511003BE
Figure 3 Typical Application Using a LTC 8785 Code Converter Unit
Bosch Security Systems | 19 April 2004
Video Coax
Camera Pan/Tilt
LTC 8785 Series | Instruction Manual |
Bosch Security Systems | 19 April 2004
EN | 11
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601 USA
Tel: 800-326-3270
Fax: 1-717-735-6560
www.boschsecuritysystems.com
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven
The Netherlands
Tele +31 40 27 80000
© 2004 Bosch Security Systems GmbH
3935 890 04412 04-17 | April 19, 2004 | Data subject to change without notice.
Bosch Security Systems Pte Ltd.
38C Jalan Pemimpin
Singapore 577180
Republic of Singapore
Tel: 65 (6) 319 3486