Before Using This Machine
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
ENG
Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
Guides with this symbol are printed manuals.
Guides with this symbol are included on the accompanying CD-ROM.
Before Using This Machine (This Manual)
• Describes precautions for using the machine.
• Includes the specifications of the machine.
Setup Guide
• Describes the settings required before using functions, such as the network settings for sending e-mail.
• Describes how to add applications and update the firmware.
Basic Operation Guide
• Provides an overview of the functions and describes the basic operations.
• Describes the maintenance and troubleshooting procedures for the machine.
• Includes answers to frequently asked questions.
e-Manual
HTML manual
• Describes all the functions of the machine. Also provided with a search function that is useful for finding and checking
information.
• Includes "Practical Workflows," which introduces flows of practical operations using functions of the machine.
Driver Installation Guide
• Provides instructions on installing the printer, fax, and other drivers.
Printer Driver Installation Guide
Mac Printer Driver Installation Guide
Fax Driver Installation Guide
Network ScanGear Installation Guide
• Included on the same CD-ROM as each driver.
To view the manual in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe Reader/Acrobat Reader/Acrobat is not installed on your system, please download it
from the Adobe Systems Incorporated website (http://www.adobe.com).
Contents
Preface • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3
How To Use This Manual • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3
Symbols Used in This Manual • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3
Keys and Buttons Used in This Manual • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3
Illustrations Used in This Manual • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4
Abbreviations Used in This Manual • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4
Trademarks • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5
Operations and Terms Used in This Manual • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7
Legal Notices • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8
Product Name • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8
FCC (Federal Communications Commission) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8
Laser Safety • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8
International ENERGY STAR Program • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
IPv6 Ready Logo • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
Information Security Standard (IEEE 2600) • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
Copyright • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
Third Party Software • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10
The Software Subjected to the Other Conditions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10
Disclaimers • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10
Legal Limitations on the Usage of Your Product and the Use of Images • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 11
Users in the U.S.A. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 11
Users in Canada • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 13
Utilisation au Canada • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 14
Super G3 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 15
Important Safety Instructions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 16
Installation • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 16
Power supply • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 17
Handling • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 17
Maintenance and Inspections • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 20
Consumables • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 22
Telephone Equipment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 22
Other Warnings • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 22
Installation Location and Handling • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 23
Installation Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 23
Avoid Installing the Machine in the Following Locations • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 23
Select a Safe Power Supply • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 24
Moving the Machine • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 24
Provide Adequate Installation Space • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 25
Handling Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •26
Backing Up/Exporting Data • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 28
Data You Can Import/Export All • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 28
Data You Can Import/Export Individually • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 28
Other Data You Can Import/Export • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 29
1
Parts and Their Functions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 30
External View • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 30
When the Cassette Feeding Unit-AF1, Inner Finisher-F1, Inner Finisher Additional Tray-A1, and Copy Tray-J1 Are
Attached: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 30
Internal View • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 32
When the Cassette Feeding Unit-AF1, Inner Finisher-F1, Inner Finisher Additional Tray-A1, and Copy Tray-J1 Are
Attached: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 32
Feeder • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 33
Control Panel Parts and Functions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 34
Main Power and Energy Saver Key • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 35
How to Turn ON the Main Power • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 35
Energy Saver Key • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 36
Shutting Down the Machine • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 36
Specifications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 37
Main Unit • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 37
Feeder • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 39
Cassette Feeding Unit-AF1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 39
Envelope Feeder Attachment-D1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 39
Staple Finisher-M1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 40
Booklet Finisher-M1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 41
Inner Finisher-F1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 43
Inner Finisher Additional Tray-A1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 44
Inner 2Way Tray-F1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 44
Copy Tray-J1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 45
Copy Card Reader-F1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 45
Super G3 FAX Board-AH2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 46
Send Function • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 46
Network Environment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 48
Hardware Specifications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 48
Software Specifications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 48
Printer Settings • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 48
Software Specifications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 48
CANON imageRUNNER ADVANCE C2230/C2225 SERIES LIMITED WARRANTY • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 49
TERMS OF imageWARE REMOTE SERVICE • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 50
TERMS OF Content Delivery System • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 51
2
Preface
Thank you for purchasing the Canon imageRUNNER ADVANCE C2230/C2225. Please read this manual thoroughly before
operating the machine to familiarize yourself with its capabilities, and to make the most of its many functions. For information
on the detailed settings for the functions described in this manual, see the e-Manual. After reading this manual, store it in a safe
place for future reference.
How To Use This Manual
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be
observed for safety.
Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly. To use the machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury to persons if not
performed correctly. To use the machine safely, always pay attention to these cautions.
Indicates operational requirements and restrictions. Be sure to read these items carefully to
operate the machine correctly, and avoid damage to the machine or property.
Indicates a clarification of an operation, or contains additional explanations for a procedure.
Reading these notes is highly recommended.
Indicates an operation that must not be performed. Read these items carefully, and make
sure not to perform the described operations.
Keys and Buttons Used in This Manual
The following symbols and key/button names are a few examples of how keys and buttons to be clicked or pressed are expressed in this
manual:
• Touch Panel Display Keys: [Key Name]
Example:
[Cancel]
[Close]
• Control Panel Keys: Key Icon (Key Name)
Example:
(Start)
(Stop)
• Buttons on Computer Operation Screens: [Button Name]
Example:
[OK]
[Add]
3
Illustrations Used in This Manual
Illustrations used in this manual are those displayed when the imageRUNNER ADVANCE C2230 has the following optional equipment attached
to it:
• Inner Finisher-F1
• Inner Finisher Additional Tray-A1
• Cassette Feeding Unit-AF1
• Copy Tray-J1
Abbreviations Used in This Manual
In this manual, product names and model names are abbreviated as follows:
Microsoft Windows 2000 operating system: Microsoft Windows Server 2003 operating system: Microsoft Windows Server 2003 R2 operating system: Microsoft Windows XP operating system: Microsoft Windows Vista operating system: Microsoft Windows Server 2008 operating system: Microsoft Windows Server 2008 R2 operating system:
Microsoft Windows 7 operating system: Microsoft Windows operating system: Microsoft Internet Explorer: Microsoft Windows Internet Explorer: Novell NetWare: Apple Macintosh: Apple Mac: 4
Windows 2000
Windows Server 2003
Windows Server 2003 R2
Windows XP
Windows Vista
Windows Server 2008
Windows Server 2008 R2
Windows 7
Windows
Internet Explorer
Internet Explorer
NetWare
Macintosh
Mac
Trademarks
MEAP and the MEAP logo are trademarks of Canon Inc.
This product contains the Universal Font Scaling Technology or UFST® under license from Monotype Imaging, Inc. UFST® is a trademark of
Monotype Imaging, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions.
Apple, AppleTalk, EtherTalk, LocalTalk, Mac, Macintosh, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other
countries.
Microsoft, Windows, Windows Vista, Windows Server, Internet Explorer, Excel and PowerPoint are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
Adobe, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries.
Copyright © 2007 -08 Adobe Systems Incorporated. All rights reserved.
Protected by U.S. Patents 5,737,599; 5,781,785; 5,819,301; 5,929,866; 5,943,063; 6,073,148; 6,515,763; 6,639,593; 6,754,382; 7,046,403; 7,213,269;
7,242,415; Patents pending in the U.S. and other countries.
All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless
otherwise stated. The name PostScript also is used as a product trademark for Adobe Systems' implementation of the PostScript language
interpreter.
Except as otherwise stated, any reference to a "PostScript printing device," "PostScript display device," or similar item refers to a printing device,
display device or item (respectively) that contains PostScript technology created or licensed by Adobe Systems Incorporated and not to devices
or items that purport to be merely compatible with the PostScript language.
Adobe, the Adobe logo, PostScript, the PostScript logo, and PostScript 3 are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Linux is a registered trademark of Linus Torvalds. Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
All other trademarks are the property of their respective owners.
5
The PDF logo is a trademark or registered trademark of Adobe Systems Incorporated in the United States and other countries.
Copyright © 2008 Adobe Systems Incorporated. All rights reserved.
Protected by U.S. Patents 6,185,684; 6,205,549; 7,213,269; 7,272,628; 7,278,168; Patents pending in the U.S. and other countries.
All instances of the name PostScript in the text are references to the PostScript language as defined by Adobe Systems Incorporated unless
otherwise stated. The name PostScript also is used as a product trademark for Adobe Systems' implementation of the PostScript language
interpreter.
Except as otherwise stated, any reference to a "PostScript printing device," "PostScript display device," or similar item refers to a printing device,
display device or item (respectively) that contains PostScript technology created or licensed by Adobe Systems Incorporated and not to devices
or items that purport to be merely compatible with the PostScript language.
Adobe, the Adobe logo, Adobe LiveCycle® Policy Server, PostScript, the PostScript Logo, and PostScript 3 are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or other countries.
All other trademarks are the property of their respective owners.
Other product and company names herein may be the trademarks of their respective owners.
6
Operations and Terms Used in This Manual
This machine makes effective use of memory to perform print operations efficiently. For example, as soon as the machine has scanned the
original that you want to copy, it can immediately scan the next person's original. You can also print from this machine, using a function other
than the Copy function. This machine combines multiple operations, so that not only copies, but various types of jobs are placed in a queue
before being processed.
To avoid confusion when reading this manual, the terms "scanning," "printing," and "copying," used throughout this manual, are defined below.
When making a copy, the process of scanning originals and printing copies may be described as separate functions.
●● Scanning
Scanning an original to be copied, scanning an original to be sent.
●● Printing
Outputting a copy or outputting data sent from a computer to the machine.
●● Copying
Printing data scanned from an original, followed by finishing options, such as stapling.
7
Legal Notices
Product Name
Safety regulations require the product's name to be registered. In some regions where this product is sold, the following name(s) in parenthesis
may be registered instead.
• imageRUNNER ADVANCE C2230/C2225 (F163100)
FCC (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate, radio frequency energy and, if not installed and used in accordance with the
Operator's Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Use of shielded cables are required to comply with Class A limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If you make such changes or
modifications, you could be required to stop operation of the equipment.
If your equipment malfunctions, please contact your local authorized Canon dealer from whom you purchased the equipment (if under
warranty), or with whom you have a servicing contract. If you are not sure who to contact, and have both purchased and are using the
equipment in the U.S.A., please refer to the "SUPPORT" page on Canon U.S.A.'s Web site (http://www.usa.canon.com).
Laser Safety
This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Also, this product is certified as a
Class 1 laser product under IEC60825-1: 2007. This means that the product does not produce hazardous laser radiation.
Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation. Do not remove protective housings or external covers, except as directed by the
equipment's manual.
The label shown below is attached to the paper drawer's right cover and toner supply port cover.
Use of controls, adjustments, or performance of procedures other than those specified in the manuals for this
machine may result in hazardous radiation exposure.
8
International ENERGY STAR Program
As an ENERGY STAR® Partner, Canon USA, Inc. has determined that this machine meets the international
ENERGY STAR Program for energy efficiency.
The International ENERGY STAR Office Equipment Program is an international program that promotes energy
saving through the use of computers and other office equipment. The program backs the development and
dissemination of products with functions that effectively reduce energy consumption. It is an open system
in which business proprietors can participate voluntarily. The targeted products are office equipment,
such as computers, displays, printers, facsimiles, and copiers. The standards and logos are uniform among
participating nations.
IPv6 Ready Logo
The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-2 established by the IPv6
Forum.
Information Security Standard (IEEE 2600)
This machine is compliant with IEEE Std 2600™ - 2008 (hereinafter referred to as IEEE 2600), a global information security standard for
multifunction peripherals and printers, and is able to achieve the security requirements defined in IEEE 2600.*
For information on how this machine meets the security requirements defined in IEEE 2600, see e-Manual > Security > IEEE 2600 Security
Standard.
* IEEE 2600.1 CC Authentication has not been obtained for this machine by itself.
Copyright
Copyright 2012 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying
and recording, or by any information storage or retrieval system without the prior written permission of Canon Inc.
This product includes software and/or software modules that are licensed by Canon Inc. or its licensors from third parties. Use and distribution
of this software and/or software modules are subject to conditions (a) through (c) below.
(a)
UFST: Copyright © 1989 - 1996, 1997, 2003, 2004, 2008, all rights reserved, by Monotype Imaging Inc.
(b)
Copyright © Unpublished Work of Novell, Inc. All Rights Reserved.
(c)
Portions of this software are copyright © 2007 The FreeType Project (www.freetype.org). All rights reserved.
9
Third Party Software
This Canon product (the "PRODUCT") includes third-party software modules. Use and distribution of these software modules (the "SOFTWARE")
are subject to the conditions below.
(1) You agree that you will comply with any applicable export control laws, restrictions or regulations of the countries involved in the event that
this product including the SOFTWARE is shipped, transferred or exported into any country.
(2) Rights holders of the SOFTWARE retain in all respects the title, ownership and intellectual property rights in and to the SOFTWARE. Except
as expressly provided herein, no license or right, expressed or implied, is hereby conveyed or granted by rights holders of the SOFTWARE to
you for any intellectual property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use with the PRODUCT.
(4) You may not assign, sublicense, market, distribute, or transfer the SOFTWARE to any third party without prior written consent of rights
holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the SOFTWARE only when (a) you assign to a transferee all of your rights to the PRODUCT
and all rights and obligations under the conditions governing the SOFTWARE and PRODUCT and (b) such transferee agrees in writing to be
bound by all these conditions.
(6) You may not decrypt, decompile, reverse engineer, disassemble or otherwise reduce the code of the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the SOFTWARE or create derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of the SOFTWARE from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is not licensed to you.
Notwithstanding (1) through (9) above, in case any other license conditions accompany third-party software modules, these software modules
are subject to these other conditions, as well.
ACCEPTANCE
THE TERMS OF THIS THIRD PARTY SOFTWARE STATED HERE OR IN RELATED WARRANTY PROVISIONS SHALL BE DEEMED ACCEPTED UPON YOUR
USE OF THE PRODUCT FOR ONE OR MORE OF ITS NORMAL PURPOSES, IF THERE HAS BEEN NO OTHER PRIOR EXPRESS ACCEPTANCE.
THE TERMS OF THIS THIRD PARTY SOFTWARE GOVERN THE THIRD PARTY SOFTWARE AS DELIVERED WITH THE PRODUCT AND ALL UPDATED
VERSIONS OF THE THIRD PARTY SOFTWARE PROVIDED UNDER MAINTENANCE AGREEMENTS OR OTHER SERVICE ARRANGEMENTS FOR THE
PRODUCT WITH CANON USA OR CANON CANADA OR THEIR RESPECTIVE AUTHORIZED SERVICE ORGANIZATIONS.
The Software Subjected to the Other Conditions
Please refer to the e-Manual on a CD-ROM bundled with this product, for more detail and corresponding license conditions.
If you need source code of certain Software, under respective Licenses, used for this PRODUCT, please send your request by email in English or
Japanese at: <oipossg@canon.co.jp>. The request must identify the names of Software and the applicable License.
Please refer to the e-Manual on a CD-ROM bundled with this product, for more detail and corresponding license conditions.
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR USE, OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
The following applies in California, USA only:
The battery included with your product contains Perchlorate Material and may require special handling.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
10
Legal Limitations on the Usage of Your Product and the Use of
Images
Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise
reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. A non-exhaustive list of these documents
is set forth below. This list is intended to be a guide only. If you are uncertain about the legality of using your product to scan, print or otherwise
reproduce any particular document, and/or of the use of the images scanned, printed or otherwise reproduced, you should consult in advance
with your legal advisor for guidance.
• Paper Money • Travelers Checks
• Money Orders
• Food Stamps
• Certificates of Deposit
• Passports
• Postage Stamps (canceled or uncanceled)
• Immigration Papers
• Identifying Badges or Insignias
• Internal Revenue Stamps (canceled or uncanceled)
• Selective Service or Draft Papers
• Bonds or Other Certificates of Indebtedness
• Checks or Drafts Issued by Governmental Agencies
• Stock Certificates
• Motor Vehicle Licenses and Certificates of Title
• Copyrighted Works/Works of Art without Permission of Copyright Owner
Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile Equipment
The fax function is available only if the FAX Board is installed.
A. Location
Supply a suitable table, cabinet, or desk for the machine. See "Specifications" in this guide for specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used. If the Super G3 2nd Line Fax Board is installed, a multi telephone line (touchtone or rotary) can be used.
2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the telephone company. If the RJ11-C wall jack is not present,
telephone/facsimile operation is not possible.
3. Order a normal business line from your telephone company's business representative. The line should be a regular voice grade line or an
equivalent one. Use one line per unit. If the Super G3 2nd Line Fax Board is installed, you can use a multi-line.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
Canon recommends an individual line following industry standards, i.e., 2500 (touch-tone) or 500 (rotary/pulse dial) telephones.
A dedicated extension off a PBX (Private Branch eXchange) unit without "Call Waiting" can be used with your facsimile unit.
Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and
special codes, which may cause a facsimile error.
C. Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line shared with other appliances that cause "electrical noise." Air conditioners, electric
typewriters, copiers, and machines of this sort generate electrical noise that often interferes with communications equipment and the sending
and receiving of documents.
11
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of this equipment is
a label that contains, among other information, a product identifier in the format of US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs
on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should
not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company. The REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular plug is provided with this equipment. This equipment is designed to be connected to the
telephone network or premise wiring using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described in the e-Manual, disconnect the equipment from the
telephone line cable and disconnect the power cord. The telephone line cable should not be reconnected or the main power switch turned
ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of
equipment.
If your equipment malfunctions, please contact your local authorized Canon dealer from whom you purchased the equipment (if under
warranty), or with whom you have a servicing contract. If you are not sure who to contact, and have both purchased and are using the
equipment in the U.S.A., please refer to the "SUPPORT" page on Canon U.S.A.'s Web site (http://www.usa.canon.com).
Rights of the Telephone Company
If this equipment imageRUNNER ADVANCE C2230/C2225 causes harm to the telephone network, the telephone company may temporarily
disconnect service. The telephone company also retains the right to make changes in facilities and services that may affect the operation of
this equipment. When such changes are necessary, the telephone company is required to give adequate prior notice to the user. However, if
advance notice is not possible, the telephone company will notify the customer as soon as possible. Also, the customer will be advised of his/
her right to file a complaint with the FCC if he/she believes it is necessary.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device to send any message via a telephone facsimile machine unless such message clearly contains
in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date
and time it is sent and an identification of the business or other entity, or other individual sending the message
and the telephone number of the sending machine or such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other number for which charges exceed local or long-distance
transmission charges.)
To program this information into your machine, complete the procedure for registering your name, unit's telephone number,
time, and date as described in Basic Operations or Settings/Registration in the e-Manual.
12
Users in Canada
Preinstallation Requirements for Canon Facsimile Equipment
The fax function is available only if the FAX Board is installed.
A. Location
Supply a suitable table, cabinet, or desk for the machine. See "Specifications" in this guide for specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used. If the Super G3 2nd Line Fax Board is installed, a multi telephone line (touchtone or rotary) can be used.
2. Order a CA11A modular jack which should be installed by the telephone company. If the CA11A jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company's business representative. The line should be a regular voice grade line or an
equivalent one. Use one line per unit. If the Super G3 2nd Line Fax Board is installed, you can use a multi-line.
DDD (Direct Distance Dial) line
or
IDDD (International Direct Distance Dial) line if you communicate overseas
Canon recommends an individual line following industry standards, i.e., 2500 (touch-tone) or 500 (rotary/pulse dial) telephones.
A dedicated extension off a PBX (Private Branch eXchange) unit without "Call Waiting" can be used with your facsimile unit.
Key telephone systems are not recommended because they send nonstandard signals to individual telephones for ringing and
special codes, which may cause a facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It should be independent from copiers, heaters, air
conditioners, or any electric equipment that is thermostatically controlled. The rated value is 115 volts and 15 amperes. The CA11A modular
jack should be relatively close to the power outlet to facilitate installation.
Notice
• This product meets the applicable Industry Canada technical specifications.
• Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications
company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring
associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord). The
customer should be aware that compliance with the above conditions may not prevent deterioration of service in some situations.
• The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The
termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the
devices does not exceed five.
• The REN of this product is 1.0.
• Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the
user to disconnect the equipment.
• Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic
water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Users should not attempt to make such connections themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
This equipment complies with the Canadian ICES-003 Class A limits.
13
Utilisation au Canada
Conditions à Remplir Préalablement à L'installation d'un Télécopieur Canon
La fonction de Fax est disponible uniquement lorsqu'une carte FAX est installee.
A. Emplacement
Prévoir une table, un meuble, ou un bureau suffisamment solide et de taille appropriée (voir "Spécifications" pour les indications de poids et
dimensions).
B. Installation téléphonique
1. Une seule ligne téléphonique (tonalités ou impulsions) doit être utilisée. Si le Super G3 2nd Line Fax Board en option est installé, il est
possible d'utiliser une ligne téléphonique multiple (tonalités ou impulsions).
2. Il faut commander un jack modulaire CA11A qui sera installé par la compagnie téléphonique. Sans ce jack, la mise en place serait impossible.
3. Si vous vous abonnez à une nouvelle ligne, demandez une ligne d'affaires normale de qualité téléphonique courante ou équivalente.
Prenez un abonnement d'une ligne par appareil. Si le Super G3 2nd Line Fax Board en option est installé, il est possible d'utiliser une ligne
téléphonique multiple.
Ligne automatique interurbaine
ou
Ligne automatique international
(si vous communiquez avec les pays étrangers)
Canon vous conseille d'utiliser une ligne individuelle conforme aux normes industrielles, à savoir: ligne téléphonique 2500 (pour
appareil à clavier) ou 500 (pour appareil à cadran/impulsions). Il est également possible de raccorder ce télécopieur à un système
téléphonique à poussoirs car la plupart de ces systèmes émettent des signaux d'appel non normalisés ou des codes spéciaux
qui risquent de perturber le fonctionnement du télécopieur.
C. Condition d'alimentation
Raccordez le télécopieur à une prise de courant plus terre à trois branches, du type simple ou double, et qui ne sert pas à alimenter un copieur,
un appareil de chauffage, un climatiseur ou tout autre appareil électrique à thermostat. L'alimentation doit être de 115 volts et 15 ampères.
Pour faciliter l'installation, le jack CA11A doit être assez proche de la prise de courant.
Remarques
• Le présent matériel est conforme aux spécifications techniques applicables d'Industrie Canada.
• Avant d'installer cet appareil, l'utilisateur doit s'assurer qu'il est permis de le connecter à l'équipement de la compagnie de télécommunication
locale et doit installer cet appareil en utilisant une méthode de connexion autorisée. Il se peut qu'il faille étendre la circuiterie intérieure de la
ligne individuelle d'abonné, qui a été installée par la compagnie, au moyen d'un jeu de connecteurs homologués (rallonge téléphonique).
• L'attention de l'utilisateur est attirée sur le fait que le respect des conditions mentionnées ci-dessus ne constitue pas une garantie contre les
dégradations de qualité du service dans certaines circonstances.
• L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme
d'indices d' équivalence de la sonnerie de tous les dispositifs n'excède pas 5.
• Le nombre d'équivalents sonnerie (REN) de ce produit est 1.0.
• Les réparations sur un appareil certifié doivent être faites par une société d'entretien canadienne autorisée par le Gouvernement canadien et
désignée par le fournisseur. Toute réparation ou modification que pourrait faire l'utilisateur de cet appareil, ou tout mauvais fonctionnement,
donne à la compagnie de télécommunication le droit de débrancher l'appareil.
• Pour sa propre protection, l'utilisateur doit s'assurer que les prises de terre de l'appareil d'alimentation, les lignes téléphoniques et les tuyaux
métalliques internes, s'il y en a, sont bien connectés entre eux. Cette précaution est particulièrement importante dans les zones rurales.
Au lieu d'essayer de faire ces branchements eux-mêmes, les utilisateurs sont invités à faire appel à un service
d'inspection faisant autorité en matière d'électricité ou à un électricien, selon le cas.
Respecte les limites de la classe A de la NMB-003 du Canada.
14
Super G3
Super G3 is a phrase used to describe the new generation of fax machines that use ITU-T V.34 standard 33.6 Kbps*
modems. Super G3 High Speed Fax machines allow transmission times of approximately 3 seconds* per page
which results in reduced telephone line charges.
* Approximately 3 seconds per page fax transmission time based on CCITT/ITU-T No.1 Chart, (JBIG,
Standard Mode) at 33.6 Kbps modem speed. The PSTN (Public Switched Telephone Network) currently
supports 28.8 Kbps modem speeds or slower, depending on telephone line conditions.
The fax function is available only if the FAX Board is installed.
15
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine. As these instructions are intended
to prevent injury to the user or other persons or destruction of property, always pay attention to these instructions. Also, since
it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual.
Improper operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may
not be covered under your Limited Warranty.
Installation
•Never block the ventilation slots and louvers on the machine. These openings are provided for proper ventilation
of working parts inside the machine. Blocking these openings can cause the machine to overheat. Never place
the machine on a soft surface, such as a sofa or rug.
•Do not install the machine in the following locations:
• A damp or dusty location
• A location near water faucets or water
• A location exposed to direct sunlight
• A location subject to high temperatures
• A location near open flames
•Do not install the machine near alcohol, paint thinner, or other flammable substances. If flammable substances
come into contact with electrical parts inside the machine, it may result in a fire or electrical shock.
•Do not place the following items on the machine. If these items come into contact with a high-voltage area inside
the machine, it may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn OFF the main power switch, and
disconnect the power cord from the power outlet. Then, contact your local authorized Canon dealer.
• Necklaces and other metal objects
• Cups, vases, flowerpots, and other containers filled with water or liquids
•Do not install the machine in unstable locations, such as unsteady platforms or inclined floors, or in locations
subject to excessive vibrations, as this may cause the machine to fall or tip over, resulting in personal injury.
•Do not remove the machine's leveling feet after the machine has been installed, as this may cause the machine to
fall or tip over, resulting in personal injury.
16
Power supply
•Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull on or
excessively bend it, as this could cause electrical damage and result in a fire or electrical shock.
•Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt,
resulting in a fire or electrical shock.
•Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.
•Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock.
•Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical shock.
•Insert the power plug completely into the power outlet, as failure to do so may result in a fire or electrical shock.
•Do not use power cords other than the power cord provided, as this may result in a fire or electrical shock.
•As a general rule, do not use extension cords. Using an extension cord may result in a fire or electrical shock.
•Do not use power supplies with voltages other than those specified herein, as this may result in a fire or electrical
shock.
•Always grasp the power plug when disconnecting the power cord. Pulling on the power cord may expose or snap
the core wire, or otherwise damage the power cord. If the power cord is damaged, this could cause current to
leak, resulting in a fire or electrical shock.
Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug,
you will be unable to unplug it in an emergency.
Handling
•Do not attempt to disassemble or modify the machine. There are high-temperature and high-voltage
components inside the machine which may result in a fire or electrical shock.
•If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF the main
power switch, and disconnect the power cord from the power outlet. Then, contact your local authorized Canon
dealer. Continued use of the machine in this condition may result in a fire or electrical shock.
•Do not use highly flammable sprays near the machine. If gas from these sprays comes into contact with the
electrical components inside the machine, it may result in a fire or electrical shock.
•To avoid damage to the power cord and creating a fire hazard, always turn OFF the main power switch, and
unplug the interface cable when moving the machine. Otherwise, the power cord or interface cable may be
damaged, resulting in a fire or electrical shock.
•Make sure that the power plug is firmly inserted into the power outlet if the machine was moved. Do not use the
machine while the connection is loose, as doing so may cause a fire.
•Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill water, liquids, or
flammable substances (alcohol, benzene, paint thinner, etc.) inside the machine. If these items come into contact
with a high-voltage area inside the machine, it may result in a fire or electrical shock. If these items are dropped
or spilled inside the machine, immediately turn OFF the main power switch, and disconnect the power cord from
the power outlet. Then, contact your local authorized Canon dealer.
•Do not use the product for uses other than as a color digital multitasking machine.
17
•Do not place heavy objects on the machine, as they may tip over or fall resulting in personal injury.
•Close the feeder gently to avoid catching your hands, as this may result in personal injury.
•Do not press down hard on the feeder when using the platen glass to make copies of thick books. Doing so may
damage the platen glass and result in personal injury.
•Do not touch the finisher while the machine is printing, as this may result in personal injury.
•Paper that has just been output from the machine may be hot. Be careful when removing or aligning paper from
the output tray. Touching paper right after it is output may result in low-temperature burns.
•Do not place your hands, hair, clothing, etc., near the exit and feed rollers. Even if the machine is not in
operation, your hands, hair, or clothing may get caught in the rollers, which may result in personal injury or
damage if the machine suddenly starts printing.
•Do not place your hands in the part of the tray where stapling is performed (near the rollers) when a finisher is
attached, as this may result in personal injury.
Staple Finisher-M1/
Booklet Finisher-M1
18
Inner Finisher-F1
•Do not insert your hand into the machine while the paper drawer is removed, as this may result in personal
injury.
•The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely
confined within protective housings and external covers, the laser beam cannot escape from the machine during
any phase of user operation. Read the following remarks and instructions for safety.
• Never open covers other than those instructed in the manuals for this machine.
• Do not remove the following caution label which is attached to the machine. If the label has been removed, contact your local authorized
Canon dealer.
• If the laser beam escapes from the machine, exposure may cause serious damage to your eyes.
• Controlling, adjusting, or operating the machine in ways not mentioned in the manuals for this machine may cause dangerous radiation to
escape from the machine.
Press
(Energy Saver) for safety when the machine will not be used for a long period of time, such as overnight. Also, turn OFF
the main power switch, and disconnect the power cord for safety when the machine will not be used for an extended period of
time, such as during consecutive holidays.
19
Maintenance and Inspections
•When cleaning the machine, first turn OFF the main power switch, then disconnect the power cord. Failure to
observe these steps may result in a fire or electrical shock.
•Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power
plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed. If the power
cord is connected for a long period of time in a damp, dusty, or smoky location, dust can build up around the
power plug and become damp. This may cause a short circuit and result in a fire.
•Clean the machine using a slightly dampened cloth with a mild detergent mixed with water. Do not use alcohol,
benzene, paint thinner, or other flammable substances. Check detergent for flammability prior to use. If
flammable substances come into contact with a high-voltage area inside the machine, it may result in a fire or
electrical shock.
•There are some areas inside the machine which are subject to high-voltages. When removing jammed paper or
when inspecting the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the
inside of the machine, as this may result in burns or electrical shock.
•Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining inside the
cartridges to ignite, resulting in burns or a fire.
•Make sure that the power plug is firmly inserted into the power outlet after cleaning the machine. Do not use the
machine while the connection is loose, as doing so may cause a fire.
•Check the power cord and power plug regularly. If the following conditions occur, contact your local authorized
Canon dealer, as the condition may cause a fire:
• There are burn marks on the power plug.
• The blade on the power plug is deformed or broken.
• The power goes OFF and ON when the power cord is bent.
• There are cuts, cracks, or indentations on the power cord.
• A part of the power cord becomes hot.
•Check the power cord and power plug regularly to make sure that they are not handled in the following manner,
as this may result in a fire or electrical shock:
• The connection part of the power plug is loose.
• Stress is being applied to the power cord by a heavy object or by affixing it with staples.
• The power plug is loose.
• The power cord is tied in a bundle.
• The power cord protrudes into a walkway.
• The power cord is in front of a heater.
20
•The fixing unit and its surroundings inside the machine may become hot during use. When removing jammed
paper or when inspecting the inside of the machine, do not touch the fixing unit and its surroundings, as doing
so may result in burns or electrical shock.
•When removing jammed paper or when inspecting the inside of the machine, do not expose yourself to the heat
emitted from the fixing unit and its surroundings for a prolonged period of time. Doing so may result in low
temperature burns, even though you did not touch the fixing unit and its surroundings directly.
•If a paper jam occurs, follow the directions on the touch panel display to remove any jammed paper from inside
the machine. Do not insert your fingers into any parts not indicated on the touch panel display, as doing so may
result in personal injury or burns.
•When removing jammed paper or replacing the toner cartridge, take care not to allow the toner to come into
contact with your hands or clothing, as this will dirty your hands or clothing. If they become dirty, wash them
immediately with cold water. Washing them with warm water will set the toner, and make it impossible to
remove the toner stains.
•When removing paper which has become jammed inside the machine, remove the jammed paper gently to
prevent the toner on the paper from scattering and getting into your eyes or mouth. If the toner gets into your
eyes or mouth, wash them immediately with cold water and immediately consult a physician.
•When removing jammed originals or paper which has become jammed inside the machine, take care not to cut
your hands or injure yourself on the edges of the originals or paper. If you cannot remove the paper, contact your
local authorized Canon dealer.
•When removing a used toner cartridge, remove the cartridge carefully to prevent the toner from scattering and
getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with cold
water and immediately consult a physician.
•Do not dismantle the toner cartridge, as doing so may cause toner to fly out and enter your eyes or mouth.
If toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a
physician.
•If toner escapes from the toner cartridge, make sure not to ingest the toner or allow it to directly touch your skin.
If toner touches your skin, wash it away with soap and water. If your skin still feels irritated after washing it, or
you ingest toner, consult a doctor immediately.
21
Consumables
•Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining inside the
cartridges to ignite, resulting in burns or a fire.
•Do not store toner cartridges or copy paper in places exposed to open flames, as this may cause the toner or
paper to ignite, resulting in burns or a fire.
•If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft,
damp cloth in a way that prevents inhalation.
Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner.
Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge.
•Keep toner and other consumables out of the reach of small children. If these items are ingested, consult a
physician immediately.
•Do not dismantle the toner cartridge, as doing so may cause toner to fly out and enter your eyes or mouth.
If toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a
physician.
•If toner escapes from the toner cartridge, make sure not to ingest the toner or allow it to directly touch your skin.
If toner touches your skin, wash it away with soap and water. If your skin still feels irritated after washing it, or
you ingest toner, consult a doctor immediately.
•When discarding used toner cartridges, put the cartridges into a bag to prevent the toner remaining inside the
cartridges from scattering, and dispose of them in a location away from open flames.
Telephone Equipment
When using telephone equipment incorporated into this machine, basic safety precautions should always be
followed to reduce the risk of fire, electrical shock, or injury to persons, including the following:
1. Do not use this machine where there is a potential for contact with water or other liquid.
2. Do not use the telephone equipment during an electrical storm, as there may be a remote risk of electrical
shock from lightning.
3. Do not use the telephone equipment to report a gas leak in the vicinity of the leak.
Other Warnings
For cardiac pacemaker users:
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move
away from the product and consult your doctor.
22
Installation Location and
Handling
This section describes precautions for installation location and handling. We recommend that you read this section prior to
using this machine.
Installation Precautions
Avoid Installing the Machine in the Following Locations
●● Avoid locations subject to temperature and
humidity extremes, whether low or high.
For example, avoid installing the machine near water faucets, hot
water heaters, humidifiers, air conditioners, heaters, or stoves.
●● Avoid poorly ventilated locations.
This machine generates a slight amount of ozone etc. during
normal use. Although sensitivity to ozone etc. may vary, this
amount is not harmful. Ozone etc. may be more noticeable
during extended use or long production runs, especially in
poorly ventilated rooms. It is recommended that the room be
appropriately ventilated, sufficient to maintain a comfortable
working environment, in areas of machine operation.
●● Avoid installing the machine in direct sunlight.
If this is unavoidable, use curtains to shade the machine. Be sure
that the curtains do not block the machine's ventilation slots or
louvers, or interfere with the electrical cord or power supply.
●● Avoid locations where a considerable amount of
dust accumulates.
●● Avoid locations where ammonia gas is emitted.
●● Avoid locations near volatile or flammable
materials, such as alcohol or paint thinner.
23
●● Avoid locations that are subject to vibration.
For example, avoid installing the machine on unstable floors or
stands.
●● Avoid exposing the machine to rapid changes in
temperature.
If the room in which the machine is installed is cold but rapidly
heated, water droplets (condensation) may form inside the
machine. This may result in a noticeable degradation in the
quality of the copied image, the inability to properly scan an
original, or the copies having no printed image at all.
●● Avoid installing the machine near computers or
other precision electronic equipment.
Electrical interference and vibrations generated by the machine
during printing can adversely affect the operation of such
equipment.
●● Avoid installing the machine near televisions,
radios, or similar electronic equipment.
The machine might interfere with sound and picture signal
reception.
Insert the power plug into a dedicated power outlet, and
maintain as much space as possible between the machine and
other electronic equipment.
●● Contact an authorized Canon dealer if
communication is unavailable.
Depending on your locale or your telephone connection, you
may be unable to perform data communication. In this case,
contact your local authorized Canon dealer.
●● Do not remove the machine's leveling feet.
Do not remove the machine's leveling feet after the machine has
been installed.
If you put weight on the front of the machine while the drawers
or units within the machine are pulled out, the machine may
fall forward. To prevent this from happening, make sure that the
machine's leveling feet are in place.
24
Select a Safe Power Supply
●● Plug the machine into a 120 V AC outlet.
●● Make sure that the power supply for the machine
is safe, and has a steady voltage.
●● Do not connect other electrical equipment to
the same power outlet to which the machine is
connected.
●● Do not connect the power cord to a multiplug
power strip, as this may cause a fire or electrical
shock.
●● The power cord may become damaged if it is
stepped on, affixed with staples, or if heavy objects
are placed on it. Continued use of a damaged
power cord can lead to an accident, such as a fire
or electrical shock.
●● The power cord should not be taut, as this may
lead to a loose connection and cause overheating,
which could result in a fire.
●● If excessive stress is applied to the connection part
of the power cord, it may damage the power cord
or the wires inside the machine may disconnect.
This could result in a fire. Avoid the following
situations:
• Connecting and disconnecting the power cord
frequently.
• Tripping over the power cord.
• The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet or
the connection part.
• Applying excessive force on the power plug.
Moving the Machine
●● If you intend to move the machine, even to a
location on the same floor of your building,
contact your local authorized Canon dealer
beforehand. Do not attempt to move the machine
yourself.
Provide Adequate Installation Space
Provide enough space on each side of the machine for unrestricted operation.
The following measures are for the imageRUNNER ADVANCE C2230.
●● When no optional products are attached:
1,139 mm
100 mm or more
884 mm
●● When the Inner Finisher-F1 and Copy Tray-J1 are attached:
1,139 mm
250 mm or more
1,224 mm
25
●● When the Booklet Finisher-M1 and Buffer Pass Unit-K1 are attached:
1,139 mm
100 mm or more
1,892 mm
Handling Precautions
●● Do not attempt to disassemble or modify the
machine.
●● Some parts inside the machine are subject to
high-voltages and temperatures. Take adequate
precautions when inspecting the inside of the
machine. Do not carry out any inspections that are
not described in the manuals for this machine.
●● Be careful not to spill liquid or drop any foreign
objects, such as paper clips or staples inside the
machine. If a foreign object comes into contact
with electrical parts inside the machine, it might
cause a short circuit and result in a fire or electrical
shock.
26
●● If there is smoke, or unusual noise, immediately
turn the main power switch OFF, disconnect
the power cord from the power outlet, and
then call your local authorized Canon dealer.
Using the machine in this state may cause a fire
or electrical shock. Also, avoid placing objects
around the power plug so that the machine can be
disconnected whenever necessary.
●● Do not turn the main power switch OFF or open
the front covers while the machine is in operation.
This may result in paper jams.
●● Do not use flammable sprays, such as spray glue,
near the machine. There is a danger of ignition.
●● This machine generates a slight amount of ozone
etc. during normal use. Although sensitivity to
ozone etc. may vary, this amount is not harmful.
Ozone etc. may be more noticeable during
extended use or long production runs, especially
in poorly ventilated rooms. It is recommended that
the room be appropriately ventilated, sufficient to
maintain a comfortable working environment, in
areas of machine operation.
●● For safety reasons, Press
(Energy Saver) when
it will not be used for a long period of time, such
as overnight. As an added safety measure, turn
OFF the main power switch, and disconnect the
power cord when the machine will not be used
for an extended period of time, such as during
consecutive holidays.
●● Use a modular cable that is shorter than 9' 10" (3
meters).
●● Use a USB cable that is shorter than 9' 10" (3
meters).
27
Backing Up/Exporting Data
Various data such as the received data, address book, and Settings/Registration settings are stored on the internal memory of
the machine.
A malfunction in the memory may cause these data to be lost. Please regularly back up/export your important data.
Please note that Canon will not be held responsible for any damages caused by the loss of data.
You can backup/export data in the following ways:
• Import/Export All
• Import/Export Individually
You can back up/export the following data:
Data You Can Import/Export All
You can save/load multiple items at once. In addition, you can exchange data with this machine and other machines which
support the Import/Export All function.
You cannot use the Import All function, depending on the recipient's machine model. For more information, contact your local
authorized Canon dealer.
Data
References
Settings/Registration Basic Information
Paper Type Management Settings
Forwarding Settings
Box Settings
Department ID Management Settings
Main Menu Settings
e-Manual > Remote UI
Web Access Settings
Favorite Settings
Address Book
Quick Menu Settings
MEAP Application Setting Information
User Setting Information
Data You Can Import/Export Individually
You can save/load data individually. In addition, you can exchange data with this machine and other machines which do not
support the Import/Export All function.
Data
References
Address Lists
Device Settings (Forwarding Settings, Address Book, Send
Function Favorite Settings)
e-Manual > Remote UI
Printer Settings
Paper Information
Web Access Favorites
28
e-Manual > Web Access
Other Data You Can Import/Export
You can exchange data with this machine and other machines which do not support the Import/Export All function.
Data
Quick Menu Information
License files for MEAP applications
Data saved from MEAP applications*1
Data Relating to MEAP
References
e-Manual > Quick Menu
User authentication information
registered for the Local Device
Authentication system of SSO-H (Single
Sign-On H)
e-Manual > MEAP
Instruction manuals for each MEAP application.
e-Manual > MEAP
*1 You may be able to back up data stored by MEAP applications, depending on the application.
• The passwords and PIN are backed up at the same time. However, some of the passwords may not be backed up, depending
on the type of the password.
• If your machine is not connected to a network, it is recommended that you print and store important information such as the
Address Book. (See e-Manual > Basic Operations.)
29
Parts and Their Functions
This section provides you with the names and functions of all the parts of the machine.
For more information on optional products, parts and their functions, see e-Manual > Optional Products/Software.
External View
This section contains an external view of the imageRUNNER ADVANCE C2230.
When the Cassette Feeding Unit-AF1, Inner Finisher-F1, Inner Finisher
Additional Tray-A1, and Copy Tray-J1 Are Attached:
30
1 Output Tray
Prints and copies are output to this tray.
2 Control Panel
Includes the keys, touch panel display, and indicators required for
operating the machine.
3 Feeder
Originals placed in the feeder are fed one sheet at a time to the
platen glass for scanning.
4 USB Port (1)
USB port to connect USB memory, external hard disks, and other
devices to the machine.
5 Upper Right Cover of the Main Unit
Open this cover when clearing a paper jam inside the main unit.
6 LAN Port
Use an Ethernet cable to connect the machine to a network.
7 USB Port (2)
Use the USB port to connect external hard disks and other devices
to the machine. You can also connect the machine to a computer
using a USB cable.
9 Multi-Purpose Tray
Use the multi-purpose tray to feed paper manually, and for
loading nonstandard paper stock, such as envelopes.
10 Paper Drawer's Upper Right Cover
Open this cover when clearing a paper jam inside the main unit.
11 Paper Drawer 2
Holds up to 550 sheets of paper (21 lb bond (80 g/m2))
12 Paper Drawer 1
Holds up to 520 sheets of paper (21 lb bond (80 g/m2)).
13 Main Power Switch
Press to the "I" side to turn the power ON.
14 Waste Toner Container
Waste toner accumulates here.
15 LINE 2
Use this port to connect the Super G3 2nd Line Fax Board to the
machine.
16 LINE 1
Use this port to connect a fax line to the machine.
8 Lower Right Cover of the Main Unit
Open this cover when clearing a paper jam inside the main unit.
31
Internal View
This section contains an external view of the imageRUNNER ADVANCE C2230.
When the Cassette Feeding Unit-AF1, Inner Finisher-F1, Inner Finisher
Additional Tray-A1, and Copy Tray-J1 Are Attached:
1 Platen Glass
Use the platen glass when scanning books, thick originals, thin
originals, transparencies, etc.
2 Upper Cover of the Fixing Unit
Open this cover to clear a paper jam in the fixing unit.
3 Duplexing Unit
Pull out the duplexing unit to clear a paper jam.
32
4 Toner Replacement Cover
Open this cover to replace the toner cartridge.
5 Toner Cartridge
When toner runs out, pull out the toner cartridge, and replace it
with a new one.
Feeder
Platen Glass
1 Feeder Cover
5 Original Set Indicator
2 Slide Guides
6 Document Feed Scanning Area
3 Original Supply Tray
7 Platen Glass
Open this cover to remove jammed paper.
Adjust these guides to match the width of the original.
Originals placed here are automatically fed sheet by sheet into the
feeder. Place originals into this tray with the surface that you want
to scan face up.
Lights when originals are placed in the original supply tray.
Scans documents sent from the feeder.
Use the platen glass when scanning books, thick originals, thin
originals, transparencies, etc.
4 Original Output Area
Originals that have been scanned from the original supply tray are
output into the original output area.
33
Control Panel Parts and Functions
2
3
4
1
19
5
6
7
15
18
17
13
9
14
16
8
12
1 [Main Menu]
Press to display the Main Menu screen. If the Main Menu screen is
not displayed when using a function, it is necessary to press [Main
Menu] before using the function.
2 Touch Panel Display
The settings screen for each function is shown on this display. Six
function keys are displayed by default.
3 Numeric keys
Press to enter numerical values.
4 Energy Saver key
Press to set or cancel the Sleep mode. Lights when the machine
enters the Sleep mode.
5 Settings/Registration key
Press to specify settings/registration.
6 Counter Check key
Press to display the copy and print count totals on the touch
panel display.
7 Stop key
Press to stop a job in progress, such as a scan, copy, or fax
(scanning only) job.
8 Edit Pen
Use when operating the touch panel display, such as to enter
characters.
9 Start key
Press to start an operation.
10 Main Power Indicator
Lights when the main power is turned ON.
34
11
10
11 Error Indicator
Flashes or lights if there is an error in the machine. When the Error
indicator flashes, follow the instructions that appear on the touch
panel display. When the Error indicator maintains a steady red
light, contact your local authorized Canon dealer.
12 Processing/Data Indicator
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light when fax data is
stored in memory.
13 Clear key
Press to clear entered values or characters.
14 Reset key
Press to restore the standard settings of the machine.
15 ID (Log In/Out) key
Press to log in/out when a login service such as Department ID
Management or SSO-H has been set.
16 Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
17 Volume Settings key
Press to display the screen for adjusting settings, such as the
transmission volume and fax sending/receiving alarm volume.
18 [Status Monitor/Cancel]
Press to check the status of jobs or to cancel print jobs. Also, you
can check the status of the machine such as the amount of paper
remaining in the paper source.
19 [Quick Menu]
Press to display functions registered in the Quick Menu.
Main Power and Energy Saver Key
The machine is provided with, a main power switch and the Energy Saver key.
How to Turn ON the Main Power
This section explains how to turn ON the main power.
If you want to turn OFF the main power and then back ON again, wait for at least 10 seconds after the main power indicator is
turned OFF before turning ON the main power.
1
2
Make sure that the power plug is firmly inserted into the power outlet.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical
shock.
Turn ON the main power.
("I" side)
1. Open the main power switch cover.
2. Press the main power switch to the
"I" side.
3. Close the main power switch cover.
The Main Power indicator on the control panel lights when you turn ON the main power switch.
Various screens appear when system software is loading.
If you are using a login service, log in using the procedure for the login service you are using.
• You can change the default display that appears after the machine is turned ON from [Default Screen
after Startup/Restoration] on the Settings/Registration screen. (See e-Manual > Settings/Registration.)
• If this machine is connected to a powered off Macintosh computer by USB cable, the computer may turn
on automatically when this machine does. In this case, disconnect the USB cable from the machine. You
may also be able to solve this problem by using a USB hub between the machine and the Macintosh.
• The response of the buttons and keys may not be optimal immediately after you turn ON the main power
of the machine.
• If you set [Quick Startup Settings for Main Power] to 'On' in [Preferences] (Settings/Registration), the tone
sounds when turning ON the main power of the machine. (Depending on the situations, the machine
does not startup quickly and the tone does not sound.)
• If the machine takes longer to startup than usual, see e-Manual > Settings/Registration.
• If you are using Department ID Management with the Copy Card Reader-F1, see e-Manual > Optional
Products/Software.
• If you are using Department ID Management, see e-Manual > Basic Operations.
• If you are using SSO-H, see e-Manual > Basic Operations.
35
Energy Saver Key
You can press
(Energy Saver) to make the machine enter the Sleep mode and reduce power consumption.
If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy consumption.
Press
(Energy Saver) to cancel the Sleep mode and resume normal machine operations.
The machine can receive and print documents from a personal computer when it is in the Sleep mode. I-fax and fax documents
can also be received while the machine is in the Sleep mode.
Shutting Down the Machine
This machine performs a procedure to protect the memory when the machine is shut down.
This enables the machine to be shut down safely, even if there are any jobs being processed, or a MEAP application is running
while the machine is shutting down.
1
Turn OFF the main power.
1. Open the main power switch cover.
2. Press the main power switch to the "
" side.
3. Close the main power switch cover.
("
" side)
• Do not turn the main power OFF while using the Fax/I-Fax function. Sending or receiving I-fax or fax
documents cannot be done when the main power is turned OFF.
• The machine may take some time to completely shutdown. Do not unplug the power cord until the main
power indicator of the machine is OFF.
• If the main power is turned OFF during scanning or printing, a paper jam may occur.
• You can shut down the machine from the Remote UI using the Remote Shutdown mode. For more
information, see e-Manual > Remote UI.
• If you set [Quick Startup Settings for Main Power] to 'On' in [Preferences] (Settings/Registration), the tone
sounds when turning OFF the main power of the machine. (Depending on the situations, the machine does
not startup quickly and the tone does not sound.)
36
Specifications
Specifications are subject to change without notice for product improvement or future release.
Main Unit
Item
Name
Specifications
Canon imageRUNNER ADVANCE C2230/C2225
Type
Desktop
Color Supported
Full Color
Resolution for Reading
600 x 600 dpi
Resolution for Writing
1,200 x 1,200 dpi
Number Of Tones
256
Available Paper
Paper Drawers:
Weight:
Paper Drawer 1: 17 to 32 lb bond (64 to 120 g/m2)
Paper Drawer 2: 17 lb bond to 60 lb cover (64 to 163 g/m2)
Type:
Paper Drawer 1:
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, and Heavy 1 (29 to 32 lb bond (106 to 120 g/
m2))
Paper Drawer 2:
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, and Heavy 1 (29 to 32 lb bond (106 to 120 g/
m2)), Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m2)), Transparency, and Envelopes
Multi-Purpose Tray:
Weight:
17 lb bond to 80 lb cover (64 to 220 g/m2)
Type:
Acceptable Originals
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, Heavy 1 (29 to 32 lb bond (106 to 120 g/m2)),
Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Tracing,
Coated, Labels, Transparency, and Envelopes
Sheet, book, three dimensional objects (up to 2 kg)
Paper Sizes
Paper Drawer 1:
11" x 17", LTR, and EXEC
Paper Drawer 2:
12" x 18", 11" x 17", LGL, LTR, LTRR, STMTR, EXEC, Custom size (5 1/2" x 7 1/8" to 12" x 15 3/8" (139.7 mm x 182
mm to 304.8 mm x 457.2 mm)), and Envelopes
Multi-Purpose Tray:
Warm-Up Time*
First Copy Time
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMTR, STMT, EXEC, Custom size (3 7/8" x 5 1/2" to 12
5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)), and Envelopes*
* Kakugata 2 envelopes can only be loaded horizontally.
After Powering ON (when [Quick Startup Settings for Main Power] is set to 'Off'): 34 seconds
After Powering ON (when [Quick Startup Settings for Main Power] is set to 'On'): 10 seconds
The time until key operations can be performed on the touch panel display is 7 seconds or less.
Even if [Quick Startup Settings for Main Power] is set to 'On', the machine does not startup quickly, depending
on the situations.
Returning from the Sleep mode: 10 seconds
* Activation time may vary, depending on the environment and conditions under which the machine is
being used. (At a room temperature of 68°F in all above cases.)
Full Color: 8.9 seconds
Black-and-White: 5.9 seconds
37
Item
Copy Speed*
Specifications
Direct (sheet/minute)
imageRUNNER ADVANCE C2230
Margin
Magnification
imageRUNNER ADVANCE C2225
12" x 18"
7
7
11" x 17"
15
15
LGL
15
15
LTR
30
25
LTRR
20
20
STMTR
30
25
EXEC
30
25
* Except when paper is fed from the multi-purpose tray.
The copy speed may vary depending on the settings for paper type, paper size, and the sending
method. When continuously copying, adjustments for machine temperature or image quality may
cause machine operations to pause or become slow.
Top: 1/8" (4.0 mm)
Left and Right: 1/8" (2.5 mm)
Bottom: 1/8" (2.5 mm)
Regular paper size
Same Ratio
Direct
Reduction
1:0.78 (LGL → LTR)
1:0.73 (11" x 17" → LGL, 11" x 15" → LTR)
1:0.64 (11" x 17" → LTR)
1:0.50 (11" x 17" → STMT)
1:0.25
Enlargement
1:1.21 (LGL → 11" x 17")
1:1.29 (LTR → 11" x 17")
1:2.00 (STMT → 11" x 17")
1:4.00
Paper Feeding System/Capacity
Copy Ratio:
Paper Drawers:
25 to 400% (in 1% increment)
Paper Drawer 1: 640 sheets (17 lb bond (64 g/m2)), 520 sheets (21 lb bond (80 g/m2))
Paper Drawer 2: 680 sheets (17 lb bond (64 g/m2)), 550 sheets (21 lb bond (80 g/m2))
Multi-Purpose Tray:
100 sheets (21 lb bond (80 g/m2))
Multiple Copies
1 to 999 sheets
Memory Capacity
2 GB
Hard Disk Capacity*
Dimensions (H x W x D)
160GB (Used space: 80GB)
* The hard disk capacity is subject to change in future release.
120 - 127V AC, 60Hz, 7.5A
Maximum Power Consumption
1.5 kW
When the machine is in the Sleep mode*:
0.8 W
When the main power switch is turned OFF:
When [Quick Startup Settings for Main Power] is set to 'On': 0.45 W
When [Quick Startup Settings for Main Power] is set to 'Off': 0.19 W
* Depending on the system and conditions of use, these values may differ.
36 1/2" x 22 1/4" x 26 3/4" (928 mm x 565 mm x 680 mm)
Weight
Approximately 198 lb (90 kg)
Installation Space (W x D)
33 3/8" x 26 3/4" (846 mm x 680 mm)
(when the multi-purpose tray is extended)
Power Source
Power Consumption
38
Feeder
Item
Specifications
Original Feeding Mechanism
Automatic Document Feeder
Size and Weight of Originals
Size:
11" x 17", LGL, LTR, LTRR, STMT and STMTR
Weight:
1-sided scanning: 11 lb bond to 34 lb bond (42 to 128 g/m2)
2-sided scanning: 13 lb bond to 34 lb bond (50 to 128 g/m2)
Original Tray Capacity
50 sheets (21 lb bond (80 /m2))
Original Scanning Speed
Copying:
1-sided scanning:
30 sheets/minute (LTR in Black-and-White/Full Color at 600 dpi)
Scanning:
1-sided scanning:
51 sheets/minute (LTR in Black-and-White/Full Color at 300 dpi)
Power Source/Consumption
From the main unit/Approximately 30 W
Dimensions (H x W x D)
5 3/8" x 22 1/4" x 21 1/4" (135 mm x 565 mm x 540 mm)
Weight
Approximately 17.4 lb (7.9 kg)
Cassette Feeding Unit-AF1
Item
Paper Sizes
Paper Drawers Capacity
Power Source/Maximum Power
Consumption
Dimensions (H x W x D)
Weight
Specifications
11" x 17", LGL, LTR, LTRR, STMTR, 12" x 18", EXEC, and Custom size (5 1/2" x 7 1/8" to 12" x 18" (139.7 mm x 182
mm to 304.8 mm x 457.2 mm))
550 sheets x 2 cassettes (21 lb bond (80 g/m2))
680 sheets x 2 cassettes (17 lb bond (64 g/m2))
From the main unit/Approximately 30 W
9 3/4" x 22 1/4" x 25 5/8" (248 mm x 565 mm x 650 mm)
Approximately 60.6 lb (27.5 kg)
Envelope Feeder Attachment-D1
Item
Acceptable Envelopes
Specifications
COM10 No.10, Monarch, DL, and ISO-C5
Capacity
50 sheets (or 1 1/4" (30 mm) in height)
Feeding Speed
Monarch, DL, ISO-C5: 12 cpm
COM10 No.10: 10 cpm
Dimensions (H x W x D)
3 1/4" x 17 1/4" x 12 1/8" (81 mm x 439 mm 307 mm)
Weight
Approximately 2.6 lb (1.2 kg)
39
Staple Finisher-M1
Item
Paper Size/Weight/Type
Specifications
Size:
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, EXEC, Custom size (3 7/8" x 5 1/2" to 12
5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)), and Envelopes
Weight:
17 lb bond to 80 lb cover (64 to 220 g/m2)
Type:
Capacity Per Tray (Upper Tray)
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, Heavy 1 (29 to 32 lb bond (106 to 120 g/m2)),
Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Tracing,
Coated, Labels, Transparency, and Envelopes*
* If an envelope is loaded vertically, it cannot be output from the Staple Finisher-M1.
No finishing set, Collate, Group mode:
LTR, STMTR and EXEC:
1,300 sheets (or 7 3/8" (188 mm) in height)
12" x 18", 11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Collate + Offset, Group + Offset mode:
LTR and EXEC:
1,300 sheets (or 7 3/8" (188 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode:
LTR and EXEC:
1,300 sheets/30 sets (or 7 3/8" (188 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
No finishing set, Collate, Group mode with different paper sizes:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode with different paper sizes:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
Capacity Per Tray (Lower Tray)
No finishing set, Collate, Group mode:
LTR, STMTR, and EXEC:
1,700 sheets (or 9 5/8" (243 mm) in height)
12" x 18", 11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Collate + Offset, Group + Offset mode:
LTR and EXEC:
1,700 sheets (or 9 5/8" (243 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode:
LTR and EXEC:
1,700 sheets/30 sets (or 9 5/8" (243 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
No finishing set, Collate, Group mode with different paper sizes:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode with different paper sizes:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
40
Item
Max. Stapling Capacity/Available
Staple Size
Power Source/Maximum Power
Consumption
Dimensions (H x W x D)
Specifications
Corner Staple/Double Staple mode:
LTR and EXEC:
50 sheets (18 to 22 lb bond (64 to 82 g/m2))
30 sheets (22 to 28 lb bond (83 to 105 g/m2))
2 sheets (29 lb bond to 80 lb cover (106 to 220 g/m2))
11" x 17", LGL, and LTRR:
30 sheets (18 to 22 lb bond (64 to 82 g/m2))
20 sheets (22 to 28 lb bond (83 to 105 g/m2))
2 sheets (29 lb bond to 80 lb cover (106 to 220 g/m2))
From the main unit/Approximately 84 W
Weight
43 1/4" x 26 1/2" x 25 1/2" (1,097 mm x 673 mm x 647 mm)
(when the auxiliary tray is extended)
Approximately 101 lb (46 kg)
Installation Space Including the
Main Unit (W x D)
62 1/8" x 26 3/4" (1,577 mm x 680 mm)
(when the multi-purpose tray and the auxiliary tray are extended)
Booklet Finisher-M1
Item
Paper Size/Weight/Type
Specifications
Size:
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, EXEC, Custom size (3 7/8" x 5 1/2" to 12
5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)), and Envelopes
Weight:
17 lb bond to 80 lb cover (64 to 220 g/m2)
Type:
Capacity Per Tray (Upper Tray)
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, Heavy 1 (29 to 32 lb bond (106 to 120 g/m2)),
Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Tracing,
Coated, Labels, Transparency, and Envelopes*
* If an envelope is loaded vertically, it cannot be output from the Booklet Finisher-M1.
No finishing set, Collate, Group mode:
LTR, STMTR and EXEC:
1,300 sheets (or 7 3/8" (188 mm) in height)
12" x 18", 11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Collate + Offset, Group + Offset mode:
LTR and EXEC:
1,300 sheets (or 7 3/8" (188 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode:
LTR and EXEC:
1,300 sheets/30 sets (or 7 3/8" (188 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
No finishing set, Collate, Group mode with different paper sizes:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode with different paper sizes:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
41
Item
Capacity Per Tray (Lower Tray)
Specifications
No finishing set, Collate, Group mode:
LTR, STMTR, and EXEC:
1,700 sheets (or 9 5/8" (243 mm) in height)
12" x 18", 11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Collate + Offset, Group + Offset mode:
LTR and EXEC:
1,700 sheets (or 9 5/8" (243 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode:
LTR and EXEC:
1,700 sheets/30 sets (or 9 5/8" (243 mm) in height)
11" x 17", LGL, and LTRR:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
No finishing set, Collate, Group mode with different paper sizes:
650 sheets (or 3 3/4" (96 mm) in height)
Staple mode with different paper sizes:
650 sheets/30 sets (or 3 3/4" (96 mm) in height)
Max. Stapling Capacity/Available
Staple Size
Corner Staple/Double Staple mode:
LTR and EXEC:
50 sheets (17 to 22 lb bond (64 to 82 g/m2))
30 sheets (22 to 28 lb bond (83 to 105 g/m2))
2 sheets (29 lb bond to 80 lb cover (106 to 220 g/m2))
11" x 17", LGL, and LTRR:
Max. Saddle Stitch Capacity/
Available Saddle Stitch Size
30 sheets (17 to 22 lb bond (64 to 82 g/m2))
20 sheets (22 to 28 lb bond (83 to 105 g/m2))
2 sheets (29 lb bond to 80 lb cover (106 to 220 g/m2))
Saddle Stitch:
11 to 16 sheets (17 to 22 lb bond (64 to 82 g/m2))
6 to 10 sheets (22 to 28 lb bond (83 to 105 g/m2))
1 to 5 sheets (29 to 32 lb bond (106 to 120 g/m2))
Saddle Folding:
1 sheet (17 lb bond to 80 lb cover (64 to 209 g/m2))
Size:
12" x 18", 11" x 17", LGL, and LTRR
Power Source/Maximum Power
Consumption
Dimensions (H x W x D)
From the main unit/Approximately 118 W
Weight
43 1/4" x 31" x 25 7/8" (1,097 mm x 786 mm x 656 mm)
(when the auxiliary tray is extended)
Approximately 165 lb (75 kg)
Installation Space Including the
Main Unit (W x D)
66 1/2" x 26 3/4" (1,689 mm x 680 mm)
(when the multi-purpose tray and the auxiliary tray are extended)
42
Inner Finisher-F1
Item
Paper Size/Weight/Type
Specifications
Size:
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, EXEC, Custom size (3 7/8" x 5 1/2" to 12
5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)), and Envelopes
Weight:
17 lb bond to 80 lb cover (64 to 220 g/m2)
Type:
Capacity Per Tray (Standard Tray)
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, Heavy 1 (29 to 32 lb bond (106 to 120 g/m2)),
Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Tracing,
Coated, Labels, Transparency, and Envelopes*
* If an envelope is loaded vertically, it cannot be output from the Inner Finisher-F1.
No finishing set, Collate, Group mode:
LTR, STMT, STMTR, and EXEC:
750 sheets (or 3 3/4" (94 mm) in height)
(when the Inner Finisher Additional Tray-A1 is not attached)
350 sheets (or 1 3/4" (44 mm) in height)
(when theInner Finisher Additional Tray-A1 is attached)
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, and LTRR:
500 sheets (or 2 1/2" (62.5 mm) in height)
(when the Inner Finisher Additional Tray-A1 is not attached)
350 sheets (or 1 3/4" (44 mm) in height)
(when the Inner Finisher Additional Tray-A1 is attached)
Collate + Offset, Group + Offset mode:
LTR:
750 sheets (or 3 3/4" (94 mm) in height)
(when the Inner Finisher Additional Tray-A1 is not attached)
350 sheets (or 1 3/4" (44 mm) in height)
(when the Inner Finisher Additional Tray-A1 is attached)
11" x 17", LGL, and LTRR:
500 sheets (or 2 1/2" (62.5 mm) in height)
(when the Inner Finisher Additional Tray-A1 is not attached)
350 sheets (or 1 3/4" (44 mm) in height)
(when the Inner Finisher Additional Tray-A1 is attached)
Staple mode:
LTR:
30 sets (or 3 3/4" (94 mm) in height)
11" x 17", LGL, and LTRR:
30 sets (or 1 3/4" (44 mm) in height)
No finishing set, Collate, Group mode with different paper sizes:
350 sheets (or 1 3/4" (44 mm) in height)
Staple mode with different paper sizes:
30 sets (or 1 3/4" (44 mm) in height)
Capacity Per Tray (Inner Finisher
Additional Tray-A1)
No finishing set, Collate, Group, Collate + Offset, Group + Offset mode:
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, and EXEC:
100 sheets (or 1/2" (12.5 mm) in height)
Staple mode:
11" x 17", LGL, LTR and LTRR:
15 sets (or 3/8" (8.1 mm) in height)
No finishing set, Collate, Group mode with different paper sizes:
100 sheets (or 1/2" (12.5 mm) in height)
Staple mode with different paper sizes:
15 sets (or 3/8" (8.1 mm) in height)
43
Item
Max. Stapling Capacity/Available
Staple Size
Specifications
Corner Staple/Double Staple mode:
LTR:
50 sheets (17 to 22 lb bond (64 to 82 g/m2))
30 sheets (22 to 28 lb bond (83 to 105 g/m2))
2 sheets (29 lb bond to 80 lb cover (106 to 220 g/m2))
11" x 17", LGL and LTRR:
Power Source/Maximum Power
Consumption
Dimensions (H x W x D)
30 sheets (17 to 22 lb bond (64 to 82 g/m2))
20 sheets (22 to 28 lb bond (83 to 105 g/m2))
2 sheets (29 lb bond to 80 lb cover (106 to 220 g/m2))
From the main unit/Approximately 39 W
10 1/4" x 23 1/4" x 21 5/8" (260 mm x 590 mm x 550 mm)
(when the auxiliary tray is extended)
Weight
Approximately 31 lb (14.0 kg) (when the optional Inner Finisher Additional Tray-A1 is attached)
Installation Space Including the
Main Unit (W x D)
40 1/4" x 26 3/4" (1,021 mm x 680 mm)
(when the multi-purpose tray and the auxiliary tray are extended)
Inner Finisher Additional Tray-A1
Item
Specifications
Paper Size/Weight/Type
See the specifications of "Paper Size/Weight/Type" in Inner Finisher-F1.
Capacity Per Tray
See the specifications of "Capacity Per Tray (Inner Finisher Additional Tray-A1)" in Inner Finisher-F1.
Dimensions (H x W x D)
2 3/4" x 15" x 17 3/4" (70 mm x 382 mm x 450 mm)
Weight
Approximately 3 lb (1.4 kg)
Inner 2Way Tray-F1
Item
Paper Size/Weight/Type
Specifications
Size:
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, EXEC, Custom size (3 7/8" x 5 1/2" to 12
5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)), and Envelopes
Weight:
17 lb bond to 80 lb cover (64 to 220 g/m2)
Type:
Dimensions (H x W x D)
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, Heavy 1 (29 to 32 lb bond (106 to 120 g/m2)),
Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m2)), Heavy 3 (61 to 80 lb cover (164 to 220 g/m2)), Tracing,
Coated, Labels, Transparency, and Envelopes
Tray A:
LTR, STMT, and Envelopes
250 sheets (21 lb bond (80 g/m2))
STMTR
150 sheets (21 lb bond (80 g/m2))
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTRR, STMTR, EXEC, and Custom size (3 7/8" x 5 1/2" to 12 5/8" x
18" (99 mm x 139.7 mm to 320 mm x 457.2 mm))
100 sheets (21 lb bond (80 g/m2))
Tray B:
12" x 18", 12 5/8" x 17 11/16", 11" x 17", LGL, LTR, LTRR, STMT, STMTR, EXEC, Custom size (3 7/8" x 5 1/2" to 12
5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)), and Envelopes*
100 sheets (21 lb bond (80 g/m2))
* If an envelope is loaded vertically, it cannot be output from Tray B.
3" x 16 3/4" x 16" (76 mm x 426 mm x 407 mm)
Weight
Approximately 1 lb (574 g)
Installation Space Including the
Main Unit
33 3/8" x 26 3/4" (846 mm x 680 mm)
(when the multi-purpose tray and the auxiliary tray are extended)
Capacity Per Tray
44
Copy Tray-J1
Item
Paper Size/Weight/Type
Specifications
Size:
11" x 17", LGL, LTR, LTRR, STMTR, and EXEC
Weight:
17 lb bond to 32 lb cover (64 to 120 g/m2)
Type:
Thin, Plain 1 (18 to 22 lb bond (65 to 82 g/m2)), Plain 2 (22 to 26 lb bond (83 to 99 g/m2)), Plain 3 (27 to 28 lb
bond (100 to 105 g/m2)), Recycled, Color, Pre-Punched, Bond, and Heavy 1 (29 to 32 lb bond (106 to 120 g/
m2))
LTR, STMTR, and EXEC:
Capacity
100 sheets (21 lb bond (80 g/m2))
11" x 17", LGL, and LTRR:
75 sheets (21 lb bond (80 g/m2))
Dimensions (H x W x D)
Weight
5 5/8" x 14 3/8" x 14 3/4" (144 mm x 365 mm x 373 mm) (when the auxiliary tray is extended)
3 1/2" x 9 5/8" x 14 3/4" (87 mm x 243 mm x 373 mm) (when the auxiliary tray is not extended)
Approximately 1 lb (438 g)
Installation Space Including the
Main Unit (W x D)
36 5/8" x 26 3/4" (930 mm x 680 mm)
(when the auxiliary tray is extended)
Copy Card Reader-F1
Item
Specifications
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading Direction
Face up
Store/Replay
Replay
Power Source
From the main unit
Dimensions (H x W x D)
1 5/8" x 3 1/2" x 3 3/4" (40 mm x 88 mm x 96 mm) (excluding the attachment kit and cable)
Weight
Approximately 7.1 oz (200g) (including the attachment kit and cable)
45
Super G3 FAX Board-AH2
Specifications remain the same even when the Super G3 2nd Line Fax Board is installed.
Item
Specifications
Telephone Line Used*1
Public Switched Telephone Network
Scan line Density (Scan,
Transmission)
Transmission Speed
Normal: 8 pels*2/mm x 3.85 line/mm
Fine: 8 pels*2/mm x 7.7 line/mm
Super-Fine: 8 pels*2/mm x 15.4 line/mm
Ultra-Fine: 16 pels*2/mm x 15.4 line/mm
Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Sizes
11" x 17" to STMTR
Receiving Paper Sizes
11" x 17" to STMTR
Transmission Times
JBIG: Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations (including destinations stored in one-touch buttons)
Image Memory
Approximately 6,000 pages
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use
facsimile communication via a general telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
Send Function
●● Scan Features
Item
Specifications
Communication Protocol
FTP (TCP/IP), SMB (TCP/IP), WebDAV
Data Format
TIFF, JPEG, PDF, XPS, OOXML (Power Point)
Resolution
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600
dpi
Windows 2000 Server SP4, Windows XP Professional SP3, Windows Server 2003 R2 SP2, Windows Vista SP2,
Windows Server 2008 SP2, Windows Server 2008 R2 SP2, Windows 7, Solaris 10, Mac OS X 10.4.x/10.5.x/10.6.x,
Red Hat Linux 9
1000BASE-T, 100BASE-TX, 10BASE-T
System Environment
Interface
Color Mode
Original Type
Automatic-Color Select (Full Color/Grayscale), Automatic-Color Select (Full Color/Black-and-White), Full Color,
Grayscale, Black-and-White
Text, Text/Photo, Photo
Other
Preview, Browse Windows (SMB) File Server
Optional PDF/XPS/OOXML
Functions
PDF
XPS
Compact, Trace and Smooth, Encryption, OCR, Device Signature, User Signature,
Optimization for Web*1, PDF/A-1b, Reader Extensions, Policy Applied
Compact, OCR, Device Signature, User Signature
OOXML
Power Point, OCR
*1 PDF files optimized for Web viewing.
46
●● E-Mail and I-Fax Features
Item
Specifications
Communication Protocol
SMTP, POP3
I-Fax Communication Mode
Simple, Full
Resolution
For Sending E-mail
Format
For Sending I-Fax
(Black-and-White)
For Sending I-Fax
(Color)
E-mail
Original Size
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi, 300 x 300 dpi,
400 x 400 dpi, 600 x 600 dpi
200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi*1, 300 x 300 dpi*1, 400 x 400 dpi*1, 600 x 600
dpi*1
100 x 100 dpi*1, 200 x 200 dpi*1, 300 x 300 dpi*1, 400 x 400 dpi*1, 600 x 600 dpi*1
TIFF, JPEG, PDF, XPS, OOXML (Power Point)
TIFF (MH, MR*1, MMR*1)
I-Fax
(Black-and-White)
I-Fax (Color):
TIFF(Profile-C)*1
E-mail
11" x 17", LGL, LTR, LTRR, STMT, STMTR
I-Fax
11" x 17", LGL*2, LTR, LTRR, STMT*2, STMTR*2
Server Software
Microsoft Exchange 2003 SP2, Microsoft Exchange 2007 SP2, Sendmail 8.14.4, Lotus Domino R7.0
Other
Searches a destination via the LDAP Server, Preview
Optional PDF/XPS/OOXML
Functions (E-mail only)
PDF
XPS
Compact, Trace and Smooth, Encryption, OCR, Device Signature, User Signature,
Optimization for Web*3, PDF/A-1b, Reader Extensions, Policy Applied
Compact, OCR, Device Signature, User Signature
OOXML
Power Point, OCR
*1 Available after setting RX conditions of the destination.
*2 Sent as LTR.
*3 PDF files optimized for Web viewing.
47
Network Environment
Hardware Specifications
Network Interface
10Base-T/100Base-TX/1000Base-T (RJ-45)
Software Specifications
Protocol Supported
TCP/IP
IPX/SPX
AppleTalk
Frame type:
Ethernet II
Print applications:
LPD/Raw/IPP/IPPS/FTP/WSD/SMB
Frame type:
Ethernet II/Ethernet 802.2/Ethernet 802.3/Ethernet SNAP/Auto Detect
Print applications:
Bindery PServer/NDS PServer/RPrinter/NPrinter
Frame type:
Ethernet SNAP
Print application:
PAP (Printer Access Protocol)
Printer Settings
Software Specifications
Command Language
Resident Fonts
Printable Area
PCL5c, PCL6, PostScript 3
PCL:
93 Scalable fonts, 2 OCR fonts, and 10 Bitmap fonts
PS:
136 Scalable fonts
PCL5c, PCL6:
Reduced to 1/6" (4.23 mm) from the top, bottom, left, and right edges of the paper.
PostScript 3:
Reduced to 1/6" (4 mm) from the top, bottom, left, and right edges of the paper.
• With 12 5/8" x 17 11/16" size paper, you cannot print in the areas 1/6" (4 mm) mm from the top and bottom
edges of the paper and 1/4" (7.5 mm) mm from the left and right edges of the paper.
• When printing in the 0" mode (apart from 12 5/8" x 17 11/16"), the upper margin becomes 1/6" (4 mm), the
lower margin becomes 1/8" (2.5 mm), and the side margins both become 1/8" (2.5 mm). The printable area is
enlarged.
• When printing in the 0" mode (12 5/8" x 17 11/16"), the upper margin becomes 1/6" (4 mm), the lower margin
becomes 1/8" (2.5 mm), and the side margins both become 1/4" (7.5 mm). The printable area is enlarged.
48
CANON imageRUNNER ADVANCE C2230/C2225 SERIES LIMITED
WARRANTY
Canon U.S.A., Inc. or Canon Canada Inc. (as applicable, "Canon") warrants the imageRUNNER ADVANCE C2230/C2225
Series product and Canon brand options designed for use with the imageRUNNER product (collectively the "Product") to be
free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the
original purchaser ("Purchaser") or 30,000 prints or copies (or a combination of both), whichever comes first. During such
warranty period, Canon shall replace, without charge, any defective part with a new or comparable rebuilt part. This
warranty shall not extend to consumables such as paper, chemicals, and toner as to which there shall be no warranty or
replacement. Warranty replacement shall not extend the original warranty period of the Product.
This limited warranty shall only apply if the Product is used in conjunction with compatible computers, peripheral equipment
and software. Canon shall have no responsibility for such items except for compatible Canon brand peripheral equipment
covered by a separate warranty ("Separate Warranty"). Repairs of such Canon brand peripheral equipment shall be governed
by the terms of the Separate Warranty. Non-Canon brand equipment that may be distributed with the Product is sold "AS IS"
and without warranty of any kind by Canon, including any implied warranty regarding merchantability or fitness for a particular
purpose, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non-Canon brand items is
given by the supplier or producer thereof. For further information on software, see below.
This warranty shall be void and of no force and effect if the Product is damaged as a result of (a) abuse, neglect, mishandling,
alteration, electric current fluctuation or accident, (b) improper use, including failure to follow operating or maintenance
instructions or environmental conditions prescribed in Canon's operator's manual or other documentation, (c) installation or
repair by other than authorized service representatives qualified by Canon who are acting in accordance with Canon's service
bulletins, (d) use of supplies or parts (other than those distributed by Canon) which damage the Product or cause abnormally
frequent service calls or service problems, or (e) use of the Product with non-compatible computers, peripheral equipment or
software, including the use of the Product in any system configuration not recommended in any manual distributed with the
Product. Nor does this warranty extend to any Product on which the original identification marks or serial numbers have been
defaced, removed, or altered.
ANY SOFTWARE THAT IS DISTRIBUTED WITH THE PRODUCT AND HAS AN ASSOCIATED END USER AGREEMENT
IS LICENSED, WARRANTED AND PROVIDED ACCORDING TO THE TERMS OF THAT AGREEMENT, INCLUDING ANY
LIMITATIONS AND DISCLAIMERS THEREIN. SUCH SOFTWARE IS SOLD WITHOUT WARRANTY OF ANY KIND BY
CANON. PLEASE CONTACT CANON IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE
SUPPLIER'S END USER AGREEMENT. CANON RECOMMENDS THAT DATA STORED ON THE PRODUCT'S HARD
DISK DRIVE BE DUPLICATED OR BACKED UP TO PREVENT ITS LOSS IN THE EVENT OF FAILURE OR OTHER
MALFUNCTION OF THE HARD DISK DRIVE.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES AND CONDITIONS REGARDING MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, RELATING TO THE USE OR PERFORMANCE OF A PRODUCT OR ANY ASSOCIATED
COMPONENT, AND ALL SUCH OTHER WARRANTIES AND CONDITIONS ARE DISCLAIMED. NO OTHER EXPRESS
WARRANTY, CONDITION OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THE PRODUCT SHALL BIND CANON ANY SUPPLIER OR ANY AUTHORIZED
SERVICE PROVIDER. NO WARRANTY IS GIVEN ON ANY USED PRODUCT.
NEITHER CANON OR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR
PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF
CANON OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE
SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR
CORRUPTION OF DATA, INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT'S HARD DISK DRIVE,
STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ITS
SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF
THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER
ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE
PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE
PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE
PROVIDER. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THE PRODUCT AND STATES SUCH PURCHASER'S EXCLUSIVE REMEDY.
CONDITIONS OF WARRANTY
Defective parts must be returned to Canon or an Authorized Service Provider with all necessary documentation and will
become the property of Canon.
THIS WARRANTY APPLIES TO PRODUCTS SOLD AND USED IN THE U.S.A. AND CANADA ONLY.
49
TERMS OF imageWARE REMOTE SERVICE
50
TERMS OF Content Delivery System
If the Content Delivery System (CDS) Service is enabled for your Canon Office Imaging Product ("Product"), Canon USA, Canon Canada or their
respective authorized independent Canon retail dealers (each a "Canon Seller") can arrange internet-based downloads for purposes of updating
firmware, delivering purchased MEAP application software and activation of optional Product features. Certain related data files also may be
downloaded (e.g. End-User License Agreements, conditions of export, Release Notes) to your Product. The internet communications will occur
between the Product and one or more servers managed by Canon Inc. ("Canon Server"). CDS Service will not download the firmware, software
or data files for purposes other than mentioned above.
You can read more about CDS Service in Canon published materials available from your dealer or on the web sites of Canon USA
[www.usa.canon.com] or Canon Canada [www.canon.ca.]. These materials include a Technology White Paper for the CDS Service.
Your instruction to Canon USA, Canon Canada or your dealer to use CDS Service or your use of CDS Service for a Product shall be considered
(i) a representation that you have an internal IP network and internet access available to Products connected to that network on a generally
continuous basis;
(ii) a representation that you have an internet connection and internal network bandwidth available for the Canon Server to download files to
each of the Products receiving the CDS Service. Downloaded files may vary in size; some will be on the order of several hundred MB. The CDS
Service Technology White Paper contains further details.
(iii) authorization by you for the Canon Seller to establish, and perform during the period of provision of Service, HTTPS/HTTP communications
using your internet and internal network bandwidth for transmissions to and from the CDS Server;
(iv) authorization by you for the Product itself or a Canon serviceperson to download or update firmware and purchased MEAP application
software, data for internet-based activation of optional Product features and certain related data files to Product from the CDS Server, and to
transmit service data (e.g. serial number, information of firmware) of Product to the CDS Server.
You acknowledge and agree that the Canon Seller and CDS Server may rely on internet addresses you assign to Products and that using the
internet has benefits but also certain risks; ACCORDINGLY, YOU AGREE THAT THE CDS SERVICE IS PROVIDED WITHOUT WARRANTY OF
ANY KIND, THAT ANY WARRANTIES ARE DISCLAIMED AND THAT NO CANON SELLER OR CANON AFFILIATE IS RESPONSIBLE FOR
ANY INJURY TO YOUR NETWORK OR TO DATA OR DEVICES NOT SUPPLIED BY A CANON SELLER. You will be responsible for network
security and any data back-up. You will timely advise the Canon Seller of any security procedures the Canon Seller will need to use to provide
CDS Services as described herein.
To the extent downloads involve presenting end user license terms on your network or network-connected Products (with a Canon Seller, Canon
affiliate or a third party as licensor) seeking agreement to such terms, any party that you allow to respond to presented license terms will be and
is authorized by you to agree (or not agree) to the terms; if license terms are not agreed, a license purchased will not be enabled and you may
apply for refund of any license fees paid.
You acknowledge and agree that the firmware provided by the CDS Service is governed by the Third Party Software terms set forth in this
manual.
51
MEMO
52
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
(See http://www.canon-europe.com/ for details on your regional dealer)
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FT5-4520 (010)
XXXXXXXXXX
© CANON INC. 2012
PRINTED IN CHINA