Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Camera User Guide
Other Shooting Modes
ENGLISH
P Mode
Playback Mode
Wi-Fi Functions
●● Make sure you read this guide, including the “Safety Precautions”
(= 13) section, before using the camera.
●● Reading this guide will help you learn to use the camera properly.
●● Store this guide safely so that you can use it in the future.
Setting Menu
●● Click the buttons in the lower right to access other pages.
: Next page
Accessories
: Previous page
: Page before you clicked a link
Appendix
●● To jump to the beginning of a chapter, click the chapter title at right.
© CANON INC. 2015
CDD-E638-010
Index
1
Before Use
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of
capacity.
Before Use
Basic Guide
Advanced Guide
●● SD memory cards*
Initial Information
Package Contents
●● SDHC memory cards*
Camera Basics
●● SDXC memory cards*
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
* Cards conforming to SD standards. However, not all memory cards have been
verified to work with the camera.
P Mode
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Playback Mode
Wi-Fi Functions
Setting Menu
Camera
Battery Pack
NB-6LH*
Battery Charger
CB-2LY/CB-2LYE
Accessories
Appendix
Index
Wrist Strap
* Do not peel off the adhesive covering from a battery pack.
●● Printed matter is also included.
●● A memory card is not included (= 2).
2
Preliminary Notes and Legal
Information
●● Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and affiliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
●● Images recorded by the camera shall be for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note
that even for personal use, photography may contravene copyright
or other legal rights at some performances or exhibitions, or in some
commercial settings.
Conventions in This Guide
●● In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
Basic Guide
Advanced Guide
●● The following camera buttons and controls are represented by icons.
Numbers in brackets correspond to the numbered controls shown in
“Part Names” (= 4).
[ ] Up button (7) on back
[ ] Left button (8) on back
[ ] Right button (13) on back
[ ] Down button (14) on back
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Shooting modes and on-screen icons and text are indicated in
brackets.
P Mode
Playback Mode
●●
: Important information you should know
●● The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
●●
: Notes and tips for expert camera use
●● Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or
may appear as red or black dots. This is not a malfunction. In addition,
this does not affect recorded images.
●● Instructions in this guide apply to the camera under default settings.
●● The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
Before Use
Wi-Fi Functions
●● = xx: Pages with related information. (in this example, “xx” represents
a page number)
Setting Menu
●● For convenience, all supported memory cards are simply referred to as
the “memory card”.
Accessories
●● The symbols “  Still Images” and “  Movies” below titles indicate
how the function is used—whether for still images or movies.
Appendix
Index
●● When the camera is used over an extended period, it may become
warm. This does not indicate damage.
3
Before Use
Part Names
(3)(4)(5)(6) (7) (8)
Basic Guide
(9)
(10) (11)
(1)
(2) (3) (4)
Advanced Guide
(5)
Camera Basics
(2)
(7)
(8)
(1)
(12)
(13) (14)
Auto Mode / Hybrid Auto
Mode
(11)
(12)
(6)
Other Shooting Modes
(9)
(13)
(14)
P Mode
(10)
(15)
Playback Mode
Wi-Fi Functions
Setting Menu
(1)Lens
(7)
Power button
(1)
(2)Microphone
(8)
Wi-Fi antenna area
(2)
Strap mount
(3)Speaker
(9)Flash
(3)
AV OUT (Audio/video output) /
DIGITAL terminal
(4)
(5)
Zoom lever
Shooting:‌[
[
Playback:‌[
[
(10)[ (Flash pop up)] switch
(telephoto)] /
(wide angle)]
(magnify)] /
(index)]
Shutter button
(6)Lamp
(11)
(N-Mark)*
(12) Tripod socket
(13) DC coupler terminal cover
(14) Memory card/battery cover
Screen (LCD monitor)
(9)Indicator
(10)[ (Mobile Device Connection)]
button
(4)HDMITM terminal
(5)
Mode switch
(6)[
(Playback)] button
(Auto Zoom)] / [
(Wi-Fi)] /
(7)[
Up button
(8)[ (Macro)] / Left button
Accessories
Appendix
(11) Movie button
(12) FUNC. (Function) / SET button
(13)[ (Flash)] / Right button
(14)[
(15)[
Index
(Display)] / Down button
(Menu)] button
* Used with NFC features (= 90).
4
Table of Contents
Before Use
Advanced Guide
Camera Basics................................................................. 24
On/Off...................................................................................... 24
Before Use
Basic Guide
Package Contents..................................................................... 2
Power-Saving Features (Auto Power Down)..............................25
Power Saving in Shooting Mode............................................25
Power Saving in Playback Mode............................................25
Compatible Memory Cards....................................................... 2
Shutter Button......................................................................... 25
Preliminary Notes and Legal Information.................................. 3
Shooting Display Options........................................................ 26
Auto Mode / Hybrid Auto
Mode
Conventions in This Guide........................................................ 3
Using the FUNC. Menu........................................................... 26
Other Shooting Modes
Part Names............................................................................... 4
Using the Menu Screen........................................................... 27
Common Camera Operations..................................................11
On-Screen Keyboard.............................................................. 28
Safety Precautions.................................................................. 13
Indicator Display...................................................................... 29
Initial Information............................................................... 2
Basic Guide
Basic Operations............................................................. 16
Initial Preparations.................................................................. 16
Advanced Guide
Camera Basics
P Mode
Playback Mode
Clock....................................................................................... 29
Wi-Fi Functions
Auto Mode / Hybrid Auto Mode....................................... 30
Shooting with Camera-Determined Settings........................... 30
Attaching the Strap.....................................................................16
Holding the Camera....................................................................16
Charging the Battery Pack..........................................................17
Inserting the Battery Pack and Memory Card.............................18
Removing the Battery Pack and Memory Card......................18
Setting the Date and Time..........................................................19
Changing the Date and Time..................................................19
Display Language.......................................................................20
Shooting (Smart Auto)................................................................30
Shooting in Hybrid Auto Mode....................................................32
Digest Movie Playback...........................................................32
Still Images/Movies................................................................33
Still Images.............................................................................33
Movies....................................................................................33
Scene Icons................................................................................34
Image Stabilization Icons............................................................35
On-Screen Frames.....................................................................35
Trying the Camera Out............................................................ 21
Common, Convenient Features.............................................. 36
Shooting (Smart Auto)................................................................21
Viewing.......................................................................................22
Erasing Images......................................................................23
Zooming In Closer on Subjects (Digital Zoom)...........................36
Zooming Automatically as the Subject Moves (Auto Zoom).......36
Using the Self-Timer...................................................................37
Using the Self-Timer to Avoid Camera Shake........................38
Customizing the Self-Timer....................................................38
Adding a Date Stamp.................................................................39
Setting Menu
Accessories
Appendix
Index
5
Continuous Shooting..................................................................40
Image Customization Features............................................... 40
Changing the Aspect Ratio.........................................................40
Changing the Number of Recording Pixels (Image Size)...........41
Guidelines for Choosing Recording Pixel Setting Based on
Paper Size (for 4:3 Images)...................................................41
Red-Eye Correction....................................................................41
Changing Movie Image Quality..................................................42
Helpful Shooting Features....................................................... 42
Displaying Grid Lines..................................................................42
Magnifying the Area in Focus.....................................................43
Checking for Closed Eyes..........................................................43
Changing the IS Mode Settings..................................................44
Deactivating Image Stabilization............................................44
Shooting Movies with Subjects at the Same Size Shown
before Shooting......................................................................44
Customizing Camera Operation.............................................. 45
Deactivating the AF-Assist Beam...............................................45
Deactivating the Red-Eye Reduction Lamp................................45
Changing the Image Display Style after Shots...........................46
Changing the Image Display Period after Shots....................46
Changing the Screen Displayed after Shots..........................46
Other Shooting Modes..................................................... 47
Enjoying a Variety of Images from Each Shot
(Creative Shot)........................................................................ 47
Image Display during Playback..................................................48
Choosing Effects........................................................................48
Specific Scenes....................................................................... 49
Applying Special Effects.......................................................... 50
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect).............51
Shots Resembling Miniature Models (Miniature Effect)..............51
Playback Speed and Estimated Playback Time
(for One-Minute Clips)............................................................52
Shooting with a Toy Camera Effect (Toy Camera Effect)............52
Shooting in Monochrome............................................................53
Special Modes for Other Purposes......................................... 53
Before Use
Basic Guide
Advanced Guide
Auto Shooting after Face Detection (Smart Shutter)..................53
Auto Shooting after Smile Detection......................................53
Auto Shooting after Wink Detection (Wink Self-Timer)...........54
Auto Shooting after Detecting New Person
(Face Self-Timer)....................................................................54
Shooting Long Exposures (Long Shutter)..................................55
High-Speed Continuous Shooting (High-Speed Burst)..............56
Camera Basics
P Mode.............................................................................. 57
Playback Mode
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Shooting in Program AE ([P] Mode)........................................ 57
Wi-Fi Functions
Image Brightness (Exposure).................................................. 58
Adjusting Image Brightness (Exposure Compensation).............58
Changing the Metering Method..................................................58
Changing the ISO Speed............................................................59
Correcting Image Brightness (i-Contrast)...................................59
Setting Menu
Accessories
Appendix
Image Colors........................................................................... 60
Adjusting White Balance.............................................................60
Custom White Balance...........................................................60
Changing Image Color Tones (My Colors).................................60
Custom Color.........................................................................61
Index
Shooting Range and Focusing................................................ 62
Shooting Close-Ups (Macro)......................................................62
Shooting Distant Subjects (Infinity).............................................62
Digital Tele-Converter.................................................................63
Changing the AF Frame Mode...................................................63
Face AiAF...............................................................................63
6
Choosing Subjects to Focus On (Tracking AF)......................64
Center.....................................................................................65
Shooting with Servo AF..........................................................65
Changing the Focus Setting.......................................................66
Flash....................................................................................... 66
Changing the Flash Mode..........................................................66
Auto........................................................................................67
On...........................................................................................67
Slow Synchro.........................................................................67
Off...........................................................................................67
Other Settings......................................................................... 67
Changing the Compression Ratio (Image Quality).....................67
Changing the IS Mode Settings..................................................68
Playback Mode................................................................. 69
Viewing.................................................................................... 69
Switching Display Modes............................................................70
Overexposure Warning (for Image Highlights).......................71
Histogram...............................................................................71
GPS Information Display........................................................71
Viewing Short Movies Created When Shooting Still Images
(Digest Movies)...........................................................................71
Viewing by Date......................................................................72
Browsing and Filtering Images................................................ 72
Protecting Images................................................................... 77
Using the Menu..........................................................................77
Choosing Images Individually.....................................................78
Selecting a Range......................................................................78
Protecting All Images at Once....................................................79
Clearing All Protection at Once..............................................79
Before Use
Basic Guide
Advanced Guide
Camera Basics
Erasing Images....................................................................... 79
Auto Mode / Hybrid Auto
Mode
Erasing All Images......................................................................80
Choosing a Selection Method................................................80
Choosing Images Individually.................................................80
Selecting a Range..................................................................81
Specifying All Images at Once................................................81
Other Shooting Modes
P Mode
Rotating Images...................................................................... 81
Playback Mode
Using the Menu..........................................................................82
Deactivating Auto Rotation.........................................................82
Wi-Fi Functions
Tagging Images as Favorites.................................................. 83
Setting Menu
Using the Menu..........................................................................83
Editing Still Images.................................................................. 84
Resizing Images.........................................................................84
Cropping.....................................................................................84
Changing Image Color Tones (My Colors).................................85
Correcting Image Brightness (i-Contrast)...................................86
Correcting Red-Eye....................................................................86
Accessories
Appendix
Index
Editing Movies......................................................................... 87
Navigating through Images in an Index......................................72
Finding Images Matching Specified Conditions..........................73
Viewing Individual Images in a Group........................................74
Wi-Fi Functions................................................................ 89
Image Viewing Options........................................................... 75
Available Wi-Fi Features......................................................... 89
Magnifying Images.....................................................................75
Viewing Slideshows....................................................................75
Changing Slideshow Settings.................................................76
Auto Playback of Related Images (Smart Shuffle).....................76
Sending Images to a Smartphone........................................... 90
Editing Digest Movies.................................................................88
Sending Images to an NFC-Compatible Smartphone................90
Connecting via NFC When Camera Is Off or in
Shooting Mode.......................................................................90
7
Connecting via NFC When Camera Is in Playback Mode......92
Sending to a Smartphone Assigned to the Button......................93
Adding a Smartphone Using the Wi-Fi Menu.............................94
Using Another Access Point.......................................................96
Previous Access Points..............................................................97
Preparing the Camera.......................................................... 112
Preparing the Computer....................................................... 112
Sending Images........................................................................ 113
Viewing Images Sent via Image Sync on Your
Smartphone.......................................................................... 113
Saving Images to a Computer................................................. 97
Using a Smartphone to View Camera Images and Control
the Camera............................................................................114
Preparing to Register a Computer..............................................97
Checking Your Computer Environment..................................97
Installing the Software............................................................97
Configuring the Computer for a Wi-Fi Connection
(Windows Only)......................................................................98
Saving Images to a Connected Computer..................................99
Confirming Access Point Compatibility...................................99
Using WPS-Compatible Access Points..................................99
Connecting to Listed Access Points.....................................101
Previous Access Points........................................................102
Sending Images to a Registered Web Service...................... 103
Registering Web Services........................................................103
Registering CANON iMAGE GATEWAY...............................103
Registering Other Web Services..........................................105
Uploading Images to Web Services.........................................105
Printing Images Wirelessly from a Connected Printer........... 106
Sending Images to Another Camera..................................... 108
Image Sending Options......................................................... 109
Sending Multiple Images..........................................................109
Select a range......................................................................109
Sending Images Tagged as Favorites.................................. 110
Notes on Sending Images........................................................ 110
Choosing the Number of Recording Pixels (Image Size)......... 111
Adding Comments.................................................................... 111
Sending Images Automatically (Image Sync).........................112
Initial Preparations.................................................................... 112
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Geotagging Images on the Camera......................................... 114
Shooting Remotely................................................................... 115
Other Shooting Modes
Editing or Erasing Wi-Fi Settings...........................................116
Editing Connection Information................................................ 116
Changing a Device Nickname.............................................. 116
Erasing Connection Information........................................... 116
Changing the Camera Nickname............................................. 117
Returning the Wi-Fi Settings to Default.................................... 117
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu................................................................... 118
Setting Menu
Adjusting Basic Camera Functions........................................118
Silencing Camera Operations................................................... 118
Adjusting the Volume................................................................ 118
Hiding Hints and Tips................................................................ 119
Date and Time.......................................................................... 119
World Clock.............................................................................. 119
Lens Retraction Timing.............................................................120
Using Eco Mode.......................................................................120
Power-Saving Adjustment........................................................120
Screen Brightness....................................................................121
Hiding the Start-Up Screen.......................................................121
Formatting Memory Cards........................................................121
Low-Level Formatting...........................................................122
File Numbering.........................................................................122
Date-Based Image Storage......................................................123
Metric / Non-Metric Display......................................................123
Accessories
Appendix
Index
8
Checking Certification Logos....................................................123
Display Language.....................................................................123
Adjusting Other Settings...........................................................124
Restoring Default Camera Settings..........................................124
Accessories.................................................................... 125
System Map.......................................................................... 125
Optional Accessories............................................................. 126
Power Supplies.........................................................................126
Flash Units................................................................................127
Other Accessories....................................................................127
Printers.....................................................................................127
Using Optional Accessories.................................................. 128
Playback on a TV.....................................................................128
Playback on a High-Definition TV.........................................128
Playback on a Standard-Definition TV.................................129
Powering the Camera with Household Power..........................129
Using the Software................................................................ 130
Computer Connections via a Cable..........................................131
Checking Your Computer Environment................................131
Installing the Software..............................................................131
Saving Images to a Computer..................................................132
Printing Images..................................................................... 133
Easy Print.................................................................................133
Configuring Print Settings.........................................................134
Cropping Images before Printing..........................................135
Choosing Paper Size and Layout before Printing................135
Available Layout Options......................................................136
Printing ID Photos................................................................136
Printing Movie Scenes..............................................................136
Movie Printing Options.........................................................136
Adding Images to the Print List (DPOF)...................................137
Configuring Print Settings.....................................................137
Setting Up Printing for Individual Images.............................137
Setting Up Printing for a Range of Images...........................138
Setting Up Printing for All Images.........................................138
Clearing All Images from the Print List.................................138
Printing Images Added to the Print List (DPOF)...................138
Adding Images to a Photobook................................................139
Choosing a Selection Method..............................................139
Adding Images Individually...................................................139
Adding All Images to a Photobook.......................................139
Removing All Images from a Photobook..............................139
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Appendix......................................................................... 140
Playback Mode
Troubleshooting..................................................................... 140
On-Screen Messages........................................................... 144
Wi-Fi Functions
On-Screen Information.......................................................... 146
Shooting (Information Display).................................................146
Battery Level........................................................................146
Playback (Detailed Information Display)...................................147
Summary of Movie Control Panel.........................................147
Setting Menu
Accessories
Appendix
Functions and Menu Tables.................................................. 148
Functions Available in Each Shooting Mode............................148
FUNC. Menu.............................................................................149
Shooting Tab.............................................................................151
Set Up Tab................................................................................154
Playback Tab............................................................................154
Print Tab...................................................................................155
Playback Mode FUNC. Menu...................................................155
Index
Handling Precautions............................................................ 155
Specifications........................................................................ 156
Camera Specifications..............................................................156
Wi-Fi.....................................................................................156
9
Digital Zoom Focal Length (35mm film equivalent)..............156
Number of Shots/Recording Time, Playback Time...............157
Number of Shots per Memory Card.....................................157
Recording Time per Memory Card.......................................157
Flash Range.........................................................................158
Shooting Range....................................................................158
Continuous Shooting Speed.................................................158
Shutter Speed......................................................................158
Aperture................................................................................158
Battery Pack NB-6LH...........................................................158
Battery Charger CB-2LY/CB-2LYE.......................................158
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Index..................................................................................... 159
Wi-Fi (Wireless LAN) Precautions......................................... 161
Playback Mode
Radio Wave Interference Precautions......................................161
Security Precautions.................................................................161
Trademarks and Licensing...................................................162
Disclaimer.............................................................................162
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
10
Common Camera Operations
Shooting
●● Use camera-determined settings (Auto Mode, Hybrid Auto Mode)
-- = 30, = 32
●● See several effects applied to each shot, using camera-determined
settings (Creative Shot Mode)
-- = 47
Shooting people well
Portraits
(= 49)
Basic Guide
Vivid Colors
(= 50)
Poster Effect
(= 50)
Fish-Eye Effect
(= 51)
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Miniature Effect
(= 51)
Toy Camera Effect
(= 52)
Monochrome
(= 53)
Other Shooting Modes
P Mode
●● Focus on faces
-- = 30, = 49, = 63
Against Snow
(= 49)
Matching specific scenes
Low Light
(= 49)
Before Use
Applying special effects
Fireworks
(= 49)
Playback Mode
●● Without using the flash (Flash Off)
-- = 30, = 67
Wi-Fi Functions
●● Include yourself in the shot (Self-Timer)
-- = 37, = 54
Setting Menu
●● Add a date stamp
-- = 39
Accessories
●● Movie clips and photos together (Movie Digest)
-- = 32
Appendix
Index
11
View
●● View images (Playback Mode)
-- = 69
●● Automatic playback (Slideshow)
-- = 75
●● On a TV
-- = 128
●● On a computer
-- = 131
●● Browse through images quickly
-- = 72
●● Erase images
-- = 79
Save
●● Save images to a computer via a cable
-- = 132
Before Use
Basic Guide
Advanced Guide
Use Wi-Fi Functions
Camera Basics
●● Send images to a smartphone
-- = 90
Auto Mode / Hybrid Auto
Mode
●● Share images online
-- = 103
Other Shooting Modes
●● Send images to a computer
-- = 97
P Mode
Playback Mode
Wi-Fi Functions
Shoot/View Movies
Setting Menu
●● Shoot movies
-- = 30
Accessories
●● View movies (Playback Mode)
-- = 69
Print
Appendix
Index
●● Print pictures
-- = 133
12
Safety Precautions
●● Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
●● The safety precautions noted here are intended to prevent you and
other persons from being injured or incurring property damage.
●● Be sure to also check the guides included with any separately sold
accessories you use.
Warning
Denotes the possibility of serious injury or death.
●● Do not trigger the flash in close proximity to people’s eyes.
This could damage your eyesight. In particular, remain at least 1 meter
(3.3 feet) away from infants when using the flash.
●● Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
●● Use only recommended power sources.
●● Do not disassemble, alter, or apply heat to the product.
●● Do not peel off the adhesive covering, if the battery pack has it.
●● Avoid dropping or subjecting the product to severe impacts.
●● Do not touch the interior of the product if it is broken, such as when
dropped.
●● Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
●● Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
●● Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
This could result in electrical shock or fire.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
●● Do not look through the viewfinder (if your model has one) at intense
light sources, such as the sun on a clear day or an intense artificial
light source.
This could damage your eyesight.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fire. Immediately stop using the
product and distance yourself from it.
Other Shooting Modes
●● Use only the recommended battery pack/batteries.
P Mode
●● Do not place the battery pack/batteries near or in direct flame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, fire, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately flush with water.
●● If the product uses a battery charger, note the following precautions.
-- Remove the plug periodically and, using a dry cloth, wipe away any
dust and dirt that has collected on the plug, the exterior of the power
outlet, and the surrounding area.
-- Do not insert or remove the plug with wet hands.
-- Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
-- Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
-- Do not cut, damage, alter, or place heavy items on the power cord, if
your product uses one.
This could result in electrical shock or fire.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
●● Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices
is restricted, such as inside airplanes and medical facilities.
13
●● Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
Caution
Denotes the possibility of injury.
●● When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
●● Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
●● Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
●● When using the flash, be careful not to cover it with your fingers or
clothing.
This could result in burns or damage to the flash.
●● Avoid using, placing, or storing the product in the following places:
-- Places subject to direct sunlight
-- Places subject to temperatures above 40 °C (104 °F)
-- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, fire, burns, or other injuries.
Overheating and damage may result in electrical shock, fire, burns, or
other injuries.
●● On products that raise and lower the flash automatically, make sure to
avoid pinching your fingers with the lowering flash.
This could result in injury.
Caution
Denotes the possibility of property damage.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense artificial light source.
Doing so may damage the image sensor or other internal components.
Auto Mode / Hybrid Auto
Mode
●● When using the camera on a sandy beach or at a windy location, be
careful not to allow dust or sand to enter the camera.
Other Shooting Modes
●● On products that raise and lower the flash automatically, do not push
the flash down or pry it open.
This may cause the product to malfunction.
P Mode
Playback Mode
●● Wipe off any dust, grime, or other foreign matter on the flash with a
cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the
product to malfunction.
Wi-Fi Functions
Setting Menu
●● Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
●● Before you discard the battery pack/batteries, cover the terminals with
tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
●● The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
●● Unplug any battery charger used with the product when not in use. Do
not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
●● When using optional lenses, lens filters, or filter adapters (if
applicable), be sure to attach these accessories firmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
●● Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or
explosion, resulting in product damage or fire.
Accessories
Appendix
Index
14
●● If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
This may cause the product to malfunction.
Before Use
Basic Guide
Advanced Guide
●● Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● When putting the camera in your bag, ensure that hard objects do not
come into contact with the screen. Also close the screen (so that it
faces the body), if your product’s screen closes.
Other Shooting Modes
●● Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
15
Basic Guide
Initial Preparations
Before Use
Basic Guide
Prepare for shooting as follows.
Advanced Guide
Attaching the Strap
Basic Operations
Basic information and instructions, from initial preparations to shooting
and playback
(2)
(1)
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Thread the end of the strap through the
strap mount (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
Other Shooting Modes
P Mode
Playback Mode
Holding the Camera
Wi-Fi Functions
Setting Menu
●● Place the strap around your wrist.
●● When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
Accessories
Appendix
Index
16
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
(1)
(2)
1 Insert the battery pack.
●● After aligning the
marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
●● For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
“Number of Shots/Recording Time, Playback Time” (= 157).
●● Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
●● The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
2 Charge the battery pack.
P Mode
●● CB-2LY: Flip out the plug (1) and plug the
charger into a power outlet (2).
Playback Mode
●● CB-2LYE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
Wi-Fi Functions
Setting Menu
●● The charging lamp turns orange, and
charging begins.
Accessories
●● When charging is finished, the lamp turns
green.
(1)
(2)
3 Remove the battery pack.
Appendix
Index
●● After unplugging the battery charger,
remove the battery pack by pushing it in
(1) and up (2).
●● To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
●● For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
17
Inserting the Battery Pack and Memory Card
4 Close the cover.
(1)
(2)
Insert the included battery pack and a memory card (sold separately).
Note that before using a memory card that is new or has been formatted
in another device, you should format the memory card with this camera
(= 121).
1 Open the cover.
(2)
(1)
●● Slide the cover (1) and open it (2).
●● Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
Before Use
Basic Guide
Advanced Guide
●● For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
Card” (= 157).
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Removing the Battery Pack and Memory Card
2 Insert the battery pack.
●● Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
(1)
(2)
●● If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
3 Check the card’s write-protect
switch and insert the memory card.
P Mode
Remove the battery pack.
●● Open the cover and press the battery
lock in the direction of the arrow.
Playback Mode
●● The battery pack will pop up.
Wi-Fi Functions
Setting Menu
Accessories
Remove the memory card.
●● Push the memory card in until it clicks,
and then slowly release it.
Appendix
Index
●● The memory card will pop up.
●● Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Slide the
switch to the unlocked position.
●● Insert the memory card with the label (1)
facing as shown until it clicks into place.
(1)
●● Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
18
4 Finish the setup process.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (= 39).
1 Turn the camera on.
●● Press the power button.
Before Use
●● Press the [ ] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
●● To turn off the camera, press the power
button.
Basic Guide
Advanced Guide
Camera Basics
●● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● The [Date/Time] screen is displayed.
●● To set daylight saving time (1 hour ahead), choose [ ] in step 2
and then choose [ ] by pressing the [ ][ ] buttons.
2 Set the date and time.
●● Press the [ ][ ] buttons to choose an
item.
●● Press the [ ][
date and time.
] buttons to specify the
●● When finished, press the [
] button.
P Mode
Playback Mode
Changing the Date and Time
Wi-Fi Functions
Adjust the date and time as follows.
Setting Menu
1 Access the menu screen.
●● Press the [
Accessories
] button.
Appendix
3
Specify your home time zone.
●● Press the [ ][ ] buttons to choose your
home time zone.
2 Choose [Date/Time].
●● Move the zoom lever to choose the [
tab.
Index
]
●● Press the [ ][ ] buttons to choose
[Date/Time], and then press the [ ]
button.
3 Change the date and time.
●● Follow step 2 in “Setting the Date and
Time” (= 19) to adjust the settings.
●● Press the [
menu screen.
] button to close the
19
●● The camera has a built-in date/time battery (backup battery).
Date/time settings will be retained for about 3 weeks after the
battery pack is removed.
●● The date/time battery will be charged in about 4 hours once you
insert a charged battery pack or connect the camera to an AC
adapter kit (sold separately, = 126), even if the camera is left
off.
●● Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” (= 19).
●● The current time is displayed if you wait too long in step 2 after
] button.
pressing the [ ] button before you press the [
In this case, press the [ ] button to dismiss the time display and
repeat step 2.
●● You can also change the display language by pressing the
] button and choosing [Language
] on the [ ] tab.
[
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Display Language
P Mode
Change the display language as needed.
Playback Mode
1 Enter Playback mode.
●● Press the [
Wi-Fi Functions
] button.
Setting Menu
2 Access the setting screen.
Accessories
●● Press and hold the [ ] button, and then
immediately press the [
] button.
3
Appendix
Index
Set the display language.
●● Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
●● Once the display language has been set,
the setting screen is no longer displayed.
20
3 Compose the shot.
Trying the Camera Out
 Still Images  Movies
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
●● Press the power button.
●● The startup screen is displayed.
2 Enter [
] mode.
●● Set the mode switch to [
●● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
Before Use
Basic Guide
Advanced Guide
4
Camera Basics
1)Focus.
Auto Mode / Hybrid Auto
Mode
Shoot.
Shooting Still Images
●● Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and frames are displayed to
indicate image areas in focus.
Other Shooting Modes
P Mode
●● If [Raise the flash] appears on the screen,
move the [ ] switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Playback Mode
Wi-Fi Functions
Setting Menu
].
●● Press the [ ] button, press the [ ][ ]
buttons to choose [
], and then press
the [ ] button again.
Accessories
Appendix
●● Press the [ ][ ] buttons to choose
[
], and then press the [ ] button.
●● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
●● Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
●● Frames displayed around any detected
subjects indicate that they are in focus.
Index
2)Shoot.
●● Press the shutter button all the way
down.
●● As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
●● Keep the camera still until the shutter
sound ends.
21
●● After displaying your shot, the camera will
revert to the shooting screen.
Recording Movies
1) Start recording.
(1)
●● Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
●● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
●● Frames displayed around any detected
faces indicate that they are in focus.
Before Use
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1
Basic Guide
Advanced Guide
Enter Playback mode.
●● Press the [
Camera Basics
] button.
Auto Mode / Hybrid Auto
Mode
●● Your last shot is displayed.
2 Choose an image.
Other Shooting Modes
●● To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
P Mode
Playback Mode
●● Once recording begins, take your finger
off the movie button.
Wi-Fi Functions
2) Finish recording.
Setting Menu
●● Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
Accessories
●● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
Appendix
Index
●● To return to single-image display, press
the [ ] button.
●● Movies are identified by a [
To play movies, go to step 3.
] icon.
22
3 Play movies.
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
●● Playback now begins, and after the movie
is finished, [
] is displayed.
●● To adjust the volume, press the [
buttons during playback.
][
●● You can choose multiple images to erase at once (= 80).
Before Use
Basic Guide
Advanced Guide
Camera Basics
]
Auto Mode / Hybrid Auto
Mode
●● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
Other Shooting Modes
P Mode
Erasing Images
Playback Mode
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered.
Wi-Fi Functions
1 Choose an image to erase.
Setting Menu
●● Press the [ ][ ] buttons to choose an
image.
Accessories
2 Erase the image.
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
Appendix
Index
●● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [Erase], and
then press the [ ] button.
●● The current image is now erased.
●● To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
23
Advanced Guide
Before Use
On/Off
Basic Guide
Shooting Mode
Advanced Guide
●● Press the power button to turn the
camera on and prepare for shooting.
Camera Basics
Other basic operations and more ways to enjoy your camera, including
shooting and playback options
Camera Basics
●● To turn the camera off, press the power
button again.
Auto Mode / Hybrid Auto
Mode
Playback Mode
Other Shooting Modes
●● Press the [
] button to turn the camera
on and view your shots.
●● To turn the camera off, press the [
button again.
P Mode
]
Playback Mode
Wi-Fi Functions
●● To switch to Playback mode from Shooting mode, press the [
]
button.
●● To switch to Shooting mode from Playback mode, press the
shutter button halfway (= 25).
●● The lens will be retracted after about one minute once the camera
is in Playback mode. You can turn the camera off when the lens is
] button.
retracted by pressing the [
Setting Menu
Accessories
Appendix
Index
24
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of
inactivity. In about two more minutes, the lens is retracted and the camera
turns itself off. To activate the screen and prepare for shooting when
the screen is off but the lens is still out, press the shutter button halfway
(= 25).
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
●● You can deactivate Auto Power Down and adjust the timing of
Display Off, if you prefer (= 120).
●● Power saving is not active while the camera is connected to other
devices via Wi-Fi (= 89), or when connected to a computer
(= 132).
Before Use
Shutter Button
Basic Guide
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
1 Press halfway. (Press lightly to
focus.)
Other Shooting Modes
●● Press the shutter button halfway. The
camera beeps twice, and frames are
displayed around image areas in focus.
P Mode
Playback Mode
2 Press all the way down. (From the
halfway position, press fully to
shoot.)
Wi-Fi Functions
●● The camera shoots, as a shutter sound
is played.
Setting Menu
●● Keep the camera still until the shutter
sound ends.
Accessories
Appendix
●● Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
●● Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Index
25
Shooting Display Options
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information” (= 146).
Before Use
Using the FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(= 149) or playback mode (= 155).
Basic Guide
Advanced Guide
1 Access the FUNC. menu.
●● Press the [
Information is displayed
Camera Basics
Auto Mode / Hybrid Auto
Mode
] button.
Other Shooting Modes
2 Choose a menu item.
No information is displayed
(2)
(1)
●● Screen brightness is automatically increased by the night view
function when you are shooting under low light, making it easier
to check how shots are composed. However, on-screen image
brightness may not match the brightness of your shots. Note that
any on-screen image distortion or jerky subject motion will not
affect recorded images.
●● For playback display options, see “Switching Display Modes”
(= 70).
P Mode
●● Press the [ ][ ] buttons to choose a
menu item (1), and then press the [ ] or
[ ] button.
Playback Mode
●● Available options (2) are listed next to
menu items, on the right.
Wi-Fi Functions
●● Depending on the menu item, functions
can be specified simply by pressing the
[ ] or [ ] button, or another screen is
displayed for configuring the function.
Setting Menu
Accessories
Appendix
3 Choose an option.
●● Press the [
item.
][
] buttons to choose an
Index
] icon can
●● Options labeled with a [
be configured by pressing the [
]
button.
●● To return to the menu items, press the
[ ] button.
26
4 Finish the setup process.
●● Press the [
] button.
●● The screen before you pressed the
[ ] button in step 1 is displayed again,
showing the option you configured.
●● To undo any accidental setting changes, you can restore the
camera’s default settings (= 124).
Before Use
Using the Menu Screen
Configure a variety of camera functions through the menu screen as
follows. Menu items are grouped by purpose on tabs, such as shooting
[ ], playback [
], and so on. Note that available menu items vary
depending on the selected shooting or playback mode (= 151 –
= 155).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
1 Access the menu screen.
●● Press the [
2
] button.
Other Shooting Modes
P Mode
Choose a tab.
Playback Mode
●● Move the zoom lever to choose a tab.
●● After you have pressed the [ ][ ]
buttons to choose a tab initially, you can
switch between tabs by pressing the
[ ][ ] buttons.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
27
3 Choose a menu item.
●● Press the [
item.
][
] buttons to choose an
●● For menu items with options not shown,
first press the [ ] or [ ] button to switch
screens, and then press the [ ][ ]
buttons to select the menu item.
●● To return to the previous screen, press
] button.
the [
Before Use
On-Screen Keyboard
Basic Guide
Use the on-screen keyboard to enter information for Wi-Fi connections
(= 90). Note that the length and type of information you can enter
varies depending on the function you are using.
Advanced Guide
Camera Basics
Entering Characters
Auto Mode / Hybrid Auto
Mode
●● Press the [ ][ ][ ][ ] buttons to choose
a character, and then press the [ ]
button to enter it.
Other Shooting Modes
4 Choose an option.
●● Press the [ ][ ] buttons to choose an
option.
5 Finish the setup process.
●● Press the [
] button to return to the
screen displayed before you pressed the
[
] button in step 1.
P Mode
Moving the Cursor
●● Choose [
button.
Playback Mode
] or [
] and press the [
]
Setting Menu
Deleting Characters
●● Choose [ ] and press the [ ] button.
The previous character will be deleted.
Confirming Input and Returning to the
Previous Screen
●● To undo any accidental setting changes, you can restore the
camera’s default settings (= 124).
Wi-Fi Functions
●● Press the [
Accessories
Appendix
Index
] button.
28
Indicator Display
The indicator on the back of the camera (= 4) lights up or blinks
depending on the camera status.
Color
Indicator
Status
On
Green
Blinking
Camera Status
Connected to a computer (= 132), or display
off (= 25, = 120)
Starting up, recording/reading/transmitting
images, shooting long exposures, (= 55), or
connecting/transmitting via Wi-Fi
Before Use
Clock
Basic Guide
You can check the current time.
●● Press and hold the [
] button.
Advanced Guide
●● The current time appears.
Camera Basics
●● If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the [ ][ ] buttons
to change the display color.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Press the [ ] button again to cancel the
clock display.
P Mode
●● When the indicator blinks green, never turn the camera off, open
the memory card/battery cover, or shake or jolt the camera, which
may corrupt images or damage the camera or memory card.
Playback Mode
Wi-Fi Functions
●● When the camera is off, press and hold the [
press the power button to display the clock.
] button, then
Setting Menu
Accessories
Appendix
Index
29
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Auto Mode /
Hybrid Auto Mode
Convenient mode for easy shots with greater control over shooting
Before Use
Basic Guide
Advanced Guide
Camera Basics
Shooting (Smart Auto)
Auto Mode / Hybrid Auto
Mode
 Still Images  Movies
Other Shooting Modes
1 Turn the camera on.
P Mode
●● Press the power button.
Playback Mode
●● The startup screen is displayed.
2 Enter [
Wi-Fi Functions
] mode.
●● Set the mode switch to [
Setting Menu
].
●● Press the [ ] button, press the [ ][ ]
buttons to choose [
], and then press
the [ ] button again.
●● Press the [ ][ ] buttons to choose
[
], and then press the [ ] button.
●● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
Accessories
Appendix
Index
●● Icons representing the scene and
image stabilization mode are displayed
in the upper right of the screen
(= 34, = 35).
●● Frames displayed around any detected
subjects indicate that they are in focus.
30
3 Compose the shot.
(1)
2)Shoot.
●● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom
bar (1) showing the zoom position is
displayed.)
●● Press the shutter button all the way
down.
●● To zoom in or out quickly, move the zoom
lever all the way toward [ ] (telephoto)
or [ ] (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
●● Keep the camera still until the shutter
sound ends.
●● As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
1) Start recording.
1)Focus.
(1)
Playback Mode
●● Press the movie button. The camera beeps
once as recording begins, and [ Rec] is
displayed with the elapsed time (1).
Wi-Fi Functions
●● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
Setting Menu
Accessories
●● Frames displayed around any detected
faces indicate that they are in focus.
●● Once recording begins, take your finger
off the movie button.
●● If [Raise the flash] appears on the screen,
move the [ ] switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Advanced Guide
Recording Movies
Shooting Still Images
●● Several AF frames are displayed when
multiple areas are in focus.
Basic Guide
●● After displaying your shot, the camera will
revert to the shooting screen.
4 Shoot.
●● Press the shutter button halfway. The
camera beeps twice after focusing, and
frames are displayed to indicate image
areas in focus.
Before Use
Appendix
Index
2)Resize the subject and recompose
the shot as needed.
●● To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
●● When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
31
3) Finish recording.
●● Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
●● Recording will stop automatically when
the memory card becomes full.
Shooting in Hybrid Auto Mode
 Still Images  Movies
You can make a short movie of the day just by shooting still images. The
camera records 2 – 4-second clips of scenes before each shot, which are
later combined in a digest movie.
1 Enter [
] mode.
●● Set the mode switch to [
].
2 Compose the shot.
●● Follow steps 3 – 4 in “Shooting (Smart
Auto)” (= 30) to compose the shot and
focus.
●● For more impressive digest movies,
aim the camera at subjects about four
seconds before shooting still images.
3 Shoot.
●● Follow step 4 in “Shooting (Smart Auto)”
(= 30) to shoot a still image.
●● Battery life is shorter in this mode than in [
] mode, because
digest movies are recorded for each shot.
●● A digest movie may not be recorded if you shoot a still image
] mode, or
immediately after turning the camera on, choosing [
operating the camera in other ways.
●● Camera operating sounds will be recorded in digest movies.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Digest movie quality is [ ] and cannot be changed.
●● Sounds are not played when you press the shutter button halfway
or trigger the self-timer.
●● Digest movies are saved as separate movie files in the following
] mode.
cases even if they were recorded on the same day in [
-- The digest movie file size reaches approximately 4 GB, or the
total recording time reaches approximately 29 minutes and 59
seconds.
-- The digest movie is protected (= 77).
-- Daylight saving time (= 19) or time zone (= 119) settings
are changed.
-- A new folder is created (= 123).
●● Recorded shutter sounds cannot be modified or erased.
●● If you prefer to record digest movies without still images, adjust
the setting in advance. Choose MENU (= 27) > [ ] tab >
[Digest Type] > [No Stills] (= 27).
●● Individual chapters can be edited (= 88).
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Digest Movie Playback
Display a still image shot in [ ] mode to play the digest movie created
on the same day, or specify the date of the digest movie to play (= 71).
●● The camera records both a still image
and movie clip. The clip, which ends with
the still image and a shutter sound, forms
a single chapter in the digest movie.
32
Still Images/Movies
●● If the camera is turned on while the [ ] button is held down, the
camera will no longer sound. To activate sounds again, press the
] button and choose [Mute] on the [ ] tab, and then
[
press the [ ][ ] buttons to choose [Off].
Still Images
●● A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
●● If your shots are dark despite the flash firing, move closer to
the subject. For details on the flash range, see “Flash Range”
(= 158).
●● The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
range of focus (shooting range), see “Shooting Range” (= 158).
●● To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
●● A blinking [ ] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has finished
recharging. Shooting can resume as soon as the flash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
●● Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
Movies
Before Use
●● Before shooting a movie, lower the flash with your finger. Be
careful not to touch the microphone (1) when shooting a movie.
Leaving the flash raised, or blocking the microphone may prevent
audio from being recorded or may cause the recording to sound
muffled.
Basic Guide
Advanced Guide
Camera Basics
(1)
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
●● Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant
camera shake. To shoot subjects at the same size shown before
shooting, adjust the image stabilization setting (= 44).
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
●● Audio recording is monaural.
Appendix
Index
●● You can change how long images are displayed after shots
(= 46).
33
Scene Icons
When Shooting Other Subjects
 Still Images  Movies
In [ ] and [
] modes, shooting scenes determined by the camera
are indicated by the icon displayed, and corresponding settings are
automatically selected for optimal focusing, subject brightness, and color.
When Shooting People
Background
People
In Motion*1
Shadows on
Face*1
Bright
–
Bright and Backlit
Icon
Background
Color
–
In Motion*1
At Close
Range
Light Blue
Before Use
Basic Guide
Advanced Guide
Bright
Gray
Bright and Backlit
Camera Basics
With Blue Sky
Auto Mode / Hybrid Auto
Mode
Light Blue
Blue Sky and
Backlit
–
Other Shooting Modes
Orange
Spotlights
Dark
P Mode
Dark Blue
Dark, Using
Tripod
*2
–
Playback Mode
–
Wi-Fi Functions
*1 Not displayed for movies.
*2 Displayed in dark scenes when the camera is held still, as when mounted on a
tripod.
Spotlights
Dark
Dark, Using
Tripod
Other
Subjects
Sunsets
Gray
With Blue Sky
Blue Sky and
Backlit
Background
Icon
Background
Color
Setting Menu
Dark Blue
*2
–
–
●● Try shooting in [ ] mode (= 57) if the scene icon does not
match actual shooting conditions, or if it is not possible to shoot
with your expected effect, color, or brightness.
Accessories
Appendix
Index
34
Image Stabilization Icons
Before Use
On-Screen Frames
 Still Images  Movies
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
[ ] and [
] modes.
Image stabilization for still images (Normal)
Image stabilization for still images when panning (Panning)*
Image stabilization for macro shots. During movie recording, [
]
is displayed, and image stabilization for macro movie recording is
used (Hybrid IS).
Image stabilization for movies, reducing strong camera shake, as
when shooting while walking (Dynamic)
Image stabilization for slow camera shake, such as when
shooting movies at telephoto (Powered)
No image stabilization, because the camera is mounted on
a tripod or held still by other means. However, during movie
recording, [ ] is displayed, and image stabilization to counteract
wind or other sources of vibration is used (Tripod IS).
* Displayed when you pan, following moving subjects with the camera. When you
follow subjects moving horizontally, image stabilization only counteracts vertical
camera shake, and horizontal stabilization stops. Similarly, when you follow
subjects moving vertically, image stabilization only counteracts horizontal camera
shake.
 Still Images  Movies
In [
] mode, a variety of frames are displayed once the camera
detects subjects you are aiming the camera at.
Basic Guide
Advanced Guide
●● A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white
frame will remain on the screen.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus
and image brightness are constantly adjusted (Servo AF).
P Mode
Playback Mode
●● Try shooting in [ ] mode (= 57) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
●● To cancel image stabilization, set [IS Mode] to [Off] (= 44). In
this case, an IS icon is not displayed.
] mode, no [
] icon is displayed.
●● In [
35
Common, Convenient Features
Zooming In Closer on Subjects (Digital Zoom)
 Still Images  Movies
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 72x enlargement.
1 Move the zoom lever toward [
].
●● Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
-- White range: optical zoom range where the image will not
appear grainy.
-- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
-- Blue range: digital zoom range where the image will appear
grainy.
●● Because the blue range will not be available at some recording
pixel settings (= 41), the maximum zoom factor can be
achieved by following step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Hold the lever until zooming stops.
●● Zooming stops at the largest zoom factor
before the image becomes noticeably
grainy, which is then indicated on the
screen.
(1)
2 Move the zoom lever toward [
again.
]
●● (1) is the current zoom factor.
●● The camera zooms in even closer on the
subject.
P Mode
●● To deactivate digital zoom, choose MENU (= 27) > [
[Digital Zoom] > [Off].
] tab >
Playback Mode
Wi-Fi Functions
Zooming Automatically as the Subject Moves
(Auto Zoom)
 Still Images Setting Menu
Accessories
 Movies
The camera automatically zooms in and out to keep a detected face
(= 30) at a constant size. If the person moves closer, the camera
automatically zooms out, and vice versa.
Appendix
Index
36
1 Enter Auto Zoom mode.
●● Press the [
●● [
] button.
] is displayed.
●● A white frame is displayed around the
detected face, and the camera zooms in
and out automatically to keep the subject
on the screen.
●● If more than one face is detected, a
white frame is displayed around the
main subject’s face and gray frames
are displayed around up to two more
faces. The camera zooms in and out
automatically to keep the subjects on the
screen.
2 Shoot.
●● Even after your shot, the frame is still
displayed and the camera continues to
zoom automatically.
] is
●● Press the [ ] button again. [
displayed and Auto Zoom is disabled.
●● Faces may not be detected at some zoom factors, or if the
subject’s head is tilted or facing the camera indirectly.
●● You can also zoom in or out with the zoom lever, but the original
zoom factor will be restored in a few seconds after you release
the lever.
●● Auto Zoom is disabled in the following situations.
-- When changing shooting modes
] button, movie button, or [ ] are pressed
-- When the [
-- When [ ] is pressed while the flash is raised
●● If the person whose face is detected moves toward the edge of
the screen, the camera zooms out to keep the person in view.
●● The zoom factor cannot be changed after you press the shutter
button all the way down in self-timer mode (= 37).
●● In order to display the subject on the screen consistently when
the subject is moving or in certain shooting conditions, the face
may not be displayed at a constant size.
●● When no face is detected, the camera zooms to a certain level
and stops zooming until a face is detected.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Using the Self-Timer
P Mode
 Still Images  Movies
Playback Mode
With the self-timer, you can include yourself in group photos or other
timed shots. The camera will shoot about 10 seconds after you press the
shutter button.
Wi-Fi Functions
1 Configure the setting.
Setting Menu
●● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 26).
Accessories
●● Once the setting is complete, [
displayed.
Appendix
] is
Index
37
2 Shoot.
Customizing the Self-Timer
 Movies
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [
●● For Movies: Press the movie button.
●● Once you start the self-timer, the lamp
will blink and the camera will play a selftimer sound.
].
Basic Guide
Advanced Guide
●● Following step 1 in “Using the Self-Timer”
(= 37), choose [ ] and press the
[
] button.
●● Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
●● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
2
Camera Basics
Auto Mode / Hybrid Auto
Mode
Configure the setting.
Other Shooting Modes
●● Press the [ ][ ] buttons to choose the
delay or number of shots.
P Mode
●● Press the [ ][ ] buttons to choose a
value, and then press the [ ] button.
●● To restore the original setting, choose [
in step 1.
]
●● Once the setting is complete, [
displayed.
Playback Mode
] is
Wi-Fi Functions
●● Follow step 2 in “Using the Self-Timer”
(= 37) to shoot.
Using the Self-Timer to Avoid Camera Shake
 Still Images Before Use
 Still Images ●● For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
Setting Menu
 Movies
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
●● Follow step 1 in “Using the Self-Timer”
(= 37) and choose [ ].
Accessories
●● For movies shot using the self-timer, the delay setting represents
the delay before recording begins, but the shots setting has no
effect.
Appendix
Index
●● Once the setting is complete, [ ] is
displayed.
●● Follow step 2 in “Using the Self-Timer”
(= 37) to shoot.
●● When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified
to take many shots. Shooting will stop automatically when the
memory card becomes full.
●● When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)
38
Adding a Date Stamp
 Still Images  Movies
The camera can add the shooting date to images, in the lower-right
corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (= 19).
●● Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
-- Print using printer functions (= 133)
-- Use camera DPOF print settings (= 137) to print
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
1 Configure the setting.
●● Press the [
] button, choose [Date
Stamp ] on the [ ] tab, and then
choose the desired option (= 27).
●● Once the setting is complete, [
displayed.
Other Shooting Modes
P Mode
] is
Playback Mode
Wi-Fi Functions
Setting Menu
2 Shoot.
●● As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
●● To restore the original setting, choose
[Off] in step 1.
Accessories
Appendix
Index
●● Date stamps cannot be edited or removed.
39
Continuous Shooting
Before Use
Image Customization Features
 Still Images Basic Guide
 Movies
In [
] mode, hold the shutter button all the way down to shoot
continuously.
For details on the continuous shooting speed, see “Continuous Shooting
Speed” (= 158).
1 Configure the setting.
Advanced Guide
Changing the Aspect Ratio
 Still Images Camera Basics
 Movies
Auto Mode / Hybrid Auto
Mode
Change the image aspect ratio (ratio of width to height) as follows.
●● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 26).
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
●● Once the setting is complete, [
displayed.
●● Once the setting is complete, the screen
aspect ratio will be updated.
P Mode
●● To restore the original setting, repeat this
process but choose [ ].
Playback Mode
] is
Other Shooting Modes
Wi-Fi Functions
Setting Menu
2 Shoot.
●● Hold the shutter button all the way down
to shoot continuously.
●● During continuous shooting, focus, exposure and color are locked
at the position/level determined when you pressed the shutter
button halfway.
●● Cannot be used with the self-timer (= 37).
●● Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
●● As more shots are taken, shooting may slow down.
●● Shooting may slow down if the flash fires.
Accessories
Used for display on widescreen HDTVs or similar display devices.
This is the same aspect ratio as 35 mm film. It is used for printing
images at 5 x 7-inch or postcard sizes.
Native aspect ratio of the camera screen. Used for display on
standard-definition televisions or similar display devices. Also
used for printing images at 3.5 x 5-inch or A-series sizes.
Appendix
Index
Square aspect ratio.
●● Not available in [
] mode.
40
Changing the Number of Recording Pixels (Image
Size)
 Still Images  Movies
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each recording pixel setting can fit on a memory card,
see “Number of Shots per Memory Card” (= 157).
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
Before Use
Red-Eye Correction
 Still Images  Movies
Red-eye that occurs in flash photography can be automatically corrected
as follows.
Basic Guide
Advanced Guide
1 Access the [Flash Settings] screen.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Press the [
] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button (= 27).
Other Shooting Modes
●● The option you configured is now
displayed.
P Mode
●● To restore the original setting, repeat this
process but choose [ ].
Playback Mode
Wi-Fi Functions
2 Configure the setting.
Guidelines for Choosing Recording Pixel Setting
Based on Paper Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
Setting Menu
●● Choose [Red-Eye Corr.], and then
choose [On] (= 27).
Accessories
●● Once the setting is complete, [
displayed.
Appendix
] is
●● To restore the original setting, repeat this
process but choose [Off].
Index
3.5 x 5 in., 5 x 7 in., Postcard
For e-mailing and similar purposes
●● Not available in [
●● Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
] mode.
●● You can also correct existing images (= 86).
●● You can also access the screen in step 2 when the flash is up by
]
pressing the [ ] button and immediately pressing the [
button.
41
Changing Movie Image Quality
Before Use
Helpful Shooting Features
 Still Images Basic Guide
 Movies
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” (= 157).
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
●● The option you configured is now
displayed.
●● To restore the original setting, repeat this
process but choose [ ].
Advanced Guide
Displaying Grid Lines
 Still Images Camera Basics
 Movies
Auto Mode / Hybrid Auto
Mode
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
●● Press the [
Lines] on the [
[On] (= 27).
] button, choose [Grid
] tab, and then choose
Other Shooting Modes
P Mode
●● Once the setting is complete, grid lines
are displayed on the screen.
Playback Mode
●● To restore the original setting, repeat this
process but choose [Off].
Wi-Fi Functions
Setting Menu
Image
Quality
Recording
Pixels
Frame Rate
Accessories
Details
1920 x 1080
30 fps
For shooting in Full HD
1280 x 720
30 fps
For shooting in HD
640 x 480
30 fps
For shooting in standard
definition
Appendix
●● Grid lines are not recorded in your shots.
Index
●● In [ ] and [ ] modes, black bars are displayed on the top and
bottom edges of the screen. These image areas are not recorded.
42
Magnifying the Area in Focus
Before Use
Checking for Closed Eyes
 Still Images  Movies
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1 Configure the setting.
●● Press the [
] button, choose [AFPoint Zoom] on the [ ] tab, and then
choose [On] (= 27).
 Still Images  Movies
[ ] is displayed when the camera detects that people may have closed
their eyes.
Basic Guide
Advanced Guide
1 Configure the setting.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Press the [
] button, choose [Blink
Detection] on the [ ] tab, and then
choose [On] (= 27).
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
2 Check the focus.
●● Press the shutter button halfway. The
face detected as the main subject is now
magnified.
●● To restore the original setting, choose
[Off] in step 1.
●● The area in focus is not magnified in the following cases when the
shutter button is pressed halfway.
-- If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
-- When digital zoom is used (= 36)
-- When Tracking AF is used (= 64)
-- When a TV is used as a display (= 128)
] mode.
●● Not available in [
2 Shoot.
Setting Menu
●● [ ] flashes when the camera detects a
person whose eyes are closed.
Accessories
●● To restore the original setting, choose
[Off] in step 1.
Appendix
●● When you have specified multiple shots in [ ] mode, this
function is only available for the final shot.
●● A frame is displayed around people whose eyes are closed when
you have selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display
Time] (= 46).
●● This feature is not available in continuous shooting mode
(= 40).
Index
43
Shooting Movies with Subjects at the Same Size
Shown before Shooting
Changing the IS Mode Settings
 Still Images  Movies
Deactivating Image Stabilization
You should set the image stabilization function to [Off] when using a tripod
or other means to secure the camera.
1 Access the setting screen.
●● Press the [
] button, choose [IS
Settings] on the [ ] tab, and then press
the [ ] button (= 27).
2 Configure the setting.
●● Press the [ ][ ] buttons to choose [IS
Mode], and then press the [ ][ ] buttons
to choose [Off].
Continuous
Off
Optimal image stabilization for the shooting conditions
is automatically applied (Intelligent IS) (= 35).
Deactivates image stabilization.
 Still Images  Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake.
Reducing the effect of image stabilization enables you to shoot subjects at
the same size shown before shooting.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Follow the steps in “Changing the IS
Mode Settings” (= 44) to access the
[IS Settings] screen.
Other Shooting Modes
●● Choose [Dynamic IS], and then choose
[2] (= 27).
P Mode
Playback Mode
Wi-Fi Functions
●● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
●● [Dynamic IS] cannot be selected when [IS Mode] is set to [Off]
(= 44).
●● For [ ], [Dynamic IS] is fixed on [1].
Setting Menu
Accessories
Appendix
Index
44
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
(= 27).
Deactivating the AF-Assist Beam
 Still Images Before Use
Deactivating the Red-Eye Reduction Lamp
Customizing Camera Operation
 Movies
The lamp (front) lights up to help you focus when you press the shutter
button halfway in low-light conditions. If you prefer, you can deactivate this
lamp.
●● Press the [
] button, choose [AFassist Beam] on the [ ] tab, and then
choose [Off] (= 27).
 Still Images  Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
Basic Guide
Advanced Guide
1 Access the [Flash Settings] screen.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Press the [
] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button (= 27).
Other Shooting Modes
2 Configure the setting.
P Mode
●● Choose [Red-Eye Lamp], and then
choose [Off] (= 27).
Playback Mode
●● To restore the original setting, repeat this
process but choose [On].
Wi-Fi Functions
●● To restore the original setting, repeat this
process but choose [On].
Setting Menu
Accessories
Appendix
Index
45
Changing the Screen Displayed after Shots
Changing the Image Display Style after Shots
 Still Images Change the way images are displayed after shots as follows.
 Movies
1 Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (= 46).
You can change how long images are displayed and what information is
displayed immediately after shooting.
●● Choose [Display Time], and then choose
the desired option.
●● To restore the original setting, repeat this
process but choose [Quick].
Quick
2 sec.,
4 sec.,
8 sec.
Hold
Off
Displays images only until you can shoot again.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Displays images until you press the shutter button
halfway.
No image display after shots.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● To restore the original setting, repeat this
process but choose [Off].
shooting] screen.
2
Advanced Guide
●● Choose [Display Info], and then choose
the desired option.
1 Access the [Review image after
Configure the setting.
Basic Guide
2 Configure the setting.
Changing the Image Display Period after Shots
●● Press the [
] button, choose
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
(= 27).
Before Use
Other Shooting Modes
P Mode
Off
Displays only the image.
Detailed
Displays shooting details (= 147).
Playback Mode
Wi-Fi Functions
●● When [Display Time] (= 46) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
●● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. By pressing the [ ]
button, you can do the following operations.
-- Protect (= 77)
-- Favorites (= 83)
-- Erase (= 79)
Setting Menu
Accessories
Appendix
Index
46
Enjoying a Variety of Images from
Each Shot (Creative Shot)
 Still Images Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with
unique image effects or captured using special functions
 Movies
Before Use
Basic Guide
Advanced Guide
The camera determines the subject and shooting conditions, automatically
applying special effects and recomposing the shot to emphasize the
subject. Six still images are recorded for each shot. You can capture
multiple still images with effects using camera-determined settings.
1 Enter [
Camera Basics
Auto Mode / Hybrid Auto
Mode
] mode.
●● Set the mode switch to [
Other Shooting Modes
].
P Mode
2 Shoot.
Playback Mode
●● Press the shutter button all the way
down. As you shoot, the shutter sound is
played three times.
Wi-Fi Functions
●● After the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
●● To keep the images displayed until you
press the shutter button halfway, press
the [ ] button. For full-screen display in
this state, choose an image by pressing
the [ ][ ][ ][ ] buttons, and then press
the [ ] button.
Setting Menu
Accessories
Appendix
Index
●● To return to the original display, press the
] button.
[
●● Shooting will take some time when the flash fires, but hold the
camera steady until the shutter sound is played three times.
●● The six images are managed together as a group (= 74).
●● Simultaneous display of the six images as shown in step 2 is only
available immediately after you shoot.
47
Image Display during Playback
The six images from each shot are managed together as a group, and
only the first image in the series is displayed during playback. To indicate
that the image is part of a group, [
] is displayed in the upper left of
the screen.
Before Use
Choosing Effects
 Still Images You can choose effects for images captured in [
●● After choosing [
[
] button.
 Movies
] mode.
Basic Guide
Advanced Guide
] mode, press the
Camera Basics
●● Press the [ ][ ] buttons to choose an
effect, and then press the [ ] button.
●● If you erase a grouped image (= 79), all images in the group
are also erased. Be careful when erasing images.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Grouped images can be played back individually (= 74) and
ungrouped (= 74).
●● Protecting (= 77) a grouped image will protect all images in
the group.
●● Grouped images can be viewed individually when played back
using Image Search (= 72) or Smart Shuffle (= 76). In this
case, images are temporarily ungrouped.
●● The following actions are not available for grouped images:
magnifying (= 75), tagging as favorites (= 83), editing
(= 84), printing (= 133), setting up individual image printing
(= 137), or adding to a photobook (= 139). To do these
things, either view grouped images individually (= 74) or
cancel grouping (= 74) first.
●● Simultaneous display as shown in step 2 is only available
immediately after you shoot.
Auto
All effects
Retro
Images resemble old photos
Monochrome
Images are generated in one color
Special
Bold, distinctive-looking images
Natural
Subdued, natural-looking images
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
48
Shooting under Low Light (Low
Light)
Specific Scenes
 Still Images Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
1 Enter [
●● Shoot with minimal camera and subject
shake even in low-light conditions.
] mode.
●● Set the mode switch to [
 Movies
Before Use
Basic Guide
Advanced Guide
Camera Basics
].
Shooting with Snowy Backgrounds
(Snow)
 Still Images 2 Choose a shooting mode.
 Still Images Other Shooting Modes
P Mode
Playback Mode
Shooting Fireworks (Fireworks)
 Still Images Shooting Portraits (Portrait)
 Movies
●● Bright, natural-colored shots of people
against snowy backgrounds.
●● Press the [ ] button, choose [
] in
the menu, and then choose a shooting
mode (= 26).
3 Shoot.
Auto Mode / Hybrid Auto
Mode
Wi-Fi Functions
 Movies
●● Vivid shots of fireworks.
Setting Menu
 Movies
Accessories
●● Take shots of people with a softening
effect.
Shooting Evening Scenes without
Using a Tripod (Handheld Night
Scene)
 Still Images  Movies
●● Beautiful shots of evening scenes or
portraits with evening scenery in the
background, without the need to hold the
camera very still (as with a tripod).
Appendix
●● Subjects appear larger in [ ] mode compared to other modes.
●● In [ ] mode, shots may look grainy because the ISO speed
(= 59) is increased to suit the shooting conditions.
●● Because the camera will shoot continuously in [ ] mode, hold it
steady while shooting.
●● In [ ] mode, excessive motion blur or certain shooting conditions
may prevent you from obtaining the desired results.
●● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (= 44).
Index
●● A single image is created by combining
consecutive shots, reducing camera
shake and image noise.
49
●● When you use a tripod for evening scenes, shooting in [
]
mode instead of [ ] mode will give better results (= 30).
●● [ ] mode recording pixel setting is [ ] (2592 x 1944) and cannot
be changed.
●● In [ ] mode, although no frames are displayed when you press
the shutter button halfway, optimal focus is still determined.
Before Use
Applying Special Effects
Basic Guide
Add a variety of effects to images when shooting.
Advanced Guide
1 Choose a shooting mode.
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) to choose a shooting mode.
Camera Basics
Auto Mode / Hybrid Auto
Mode
2 Shoot.
Other Shooting Modes
Shooting in Vivid Colors (Super Vivid)
 Still Images  Movies
P Mode
●● Shots in rich, vivid colors.
Playback Mode
Wi-Fi Functions
Posterized Shots (Poster Effect)
 Still Images Setting Menu
 Movies
Accessories
●● Shots that resemble an old poster or
illustration.
Appendix
Index
●● In [ ] and [ ] modes, try taking some test shots first, to make
sure you obtain the desired results.
50
Shooting with a Fish-Eye Lens Effect (Fish-Eye
Effect)
 Still Images  Movies
Shoot with the distorting effect of a fish-eye lens.
1 Choose [
Shots Resembling Miniature Models (Miniature
Effect)
].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ].
2 Choose an effect level.
●● Press the [ ] button, press the [ ][ ]
buttons to choose an effect level, and
then press the [ ] button.
●● A preview is shown of how your shot will
look with the effect applied.
3 Shoot.
●● Try taking some test shots first, to make sure you obtain the
desired results.
 Still Images  Movies
Before Use
Basic Guide
Advanced Guide
Creates the effect of a miniature model, by blurring image areas above
and below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1
Choose [
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
].
P Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ].
Playback Mode
●● A white frame is displayed, indicating the
image area that will not be blurred.
2
Wi-Fi Functions
Choose the area to keep in focus.
●● Press the [
Setting Menu
] button.
●● Move the zoom lever to resize the frame,
and press the [ ][ ] buttons to move it.
Accessories
Appendix
3 For movies, choose the movie
Index
playback speed.
●● Press the [
] button, and then
press the [ ][ ] buttons to choose the
speed.
4 Return to the shooting screen and
shoot.
●● Press the [
] button to return to the
shooting screen, and then shoot.
51
Playback Speed and Estimated Playback Time (for
One-Minute Clips)
Speed
Playback Time
Shooting with a Toy Camera Effect (Toy Camera
Effect)
 Still Images Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
Basic Guide
Advanced Guide
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1 Choose [
Movies are played back at 30 fps.
Camera Basics
].
Auto Mode / Hybrid Auto
Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [
].
●● The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
●● Try taking some test shots first, to make sure you obtain the
desired results.
●● To switch the orientation of the frame to vertical, press the [ ][ ]
buttons in step 2. To return the frame to horizontal orientation,
press the [ ][ ] buttons.
●● To move the frame when it is in horizontal orientation, press the
[ ][ ] buttons, and to move the frame when it is in vertical
orientation, press the [ ][ ] buttons.
●● Holding the camera vertically will change the orientation of the
frame.
] and [ ] at
●● Movie image quality is [ ] at an aspect ratio of [
] (= 40). These quality settings cannot
an aspect ratio of [
be changed.
 Movies
Before Use
Other Shooting Modes
2 Choose a color tone.
P Mode
●● Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button.
Playback Mode
●● A preview is shown of how your shot will
look with the effect applied.
Wi-Fi Functions
Setting Menu
3 Shoot.
Standard
Shots resemble toy camera images.
Warm
Images have a warmer tone than with [Standard].
Cool
Images have a cooler tone than with [Standard].
Accessories
Appendix
Index
●● Try taking some test shots first, to make sure you obtain the
desired results.
52
Shooting in Monochrome
 Still Images ].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ].
2 Choose a color tone.
●● Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button.
●● A preview is shown of how your shot will
look with the effect applied.
3 Shoot.
B/W
Sepia
Blue
Black and white shots.
Sepia tone shots.
Blue and white shots.
Basic Guide
 Movies
Shoot images in black and white, sepia, or blue and white.
1 Choose [
Before Use
Special Modes for Other Purposes
Advanced Guide
Auto Shooting after Face Detection (Smart
Shutter)
 Still Images Camera Basics
 Movies
Auto Mode / Hybrid Auto
Mode
Auto Shooting after Smile Detection
Other Shooting Modes
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1 Choose [
P Mode
].
Playback Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ], and then
press the [ ] button.
●● Press the [ ][ ] buttons to choose [
and then press the [ ] button.
Wi-Fi Functions
Setting Menu
],
Accessories
●● The camera now enters shooting standby
mode, and [Smile Detection on] is
displayed.
2 Aim the camera at a person.
Appendix
Index
●● Each time the camera detects a smile, it
will shoot after the lamp lights up.
●● To pause smile detection, press the
[ ] button. Press the [ ] button again to
resume detection.
●● Switch to another mode when you finish shooting, or the camera
will continue shooting each time a smile is detected.
53
4 Face the camera and wink.
●● You can also shoot as usual by pressing the shutter button.
●● The camera can detect smiles more easily when subjects face
the camera and open their mouth wide enough so that teeth are
visible.
●● To change the number of shots, press the [ ][ ] buttons
after choosing [ ] in step 1. [Blink Detection] (= 43) is only
available for the final shot.
 Movies
Aim the camera at a person and press the shutter button all the way
down. The camera will shoot about two seconds after a wink is detected.
1 Choose [
].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ], and then
press the [ ] button.
●● Press the [ ][ ] buttons to choose [
and then press the [ ] button.
2
],
Compose the shot and press the
shutter button halfway.
●● Make sure a green frame is displayed
around the face of the person who will
wink.
3 Press the shutter button all the way
down.
●● The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
●● The lamp blinks and the self-timer sound
is played.
Basic Guide
Advanced Guide
●● To cancel shooting after you have
triggered the self-timer, press the
] button.
[
Auto Shooting after Wink Detection (Wink Self-Timer)
 Still Images Before Use
●● The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● If the wink is not detected, wink again slowly and deliberately.
●● Winking may not be detected if eyes are obscured by hair, a hat,
or glasses.
●● Closing and opening both eyes at once will also be detected as
a wink.
●● If winking is not detected, the camera will shoot about 15 seconds
later.
●● To change the number of shots, press the [ ][ ] buttons
after choosing [ ] in step 1. [Blink Detection] (= 43) is only
available for the final shot.
●● If no one is in the shooting area when the shutter button is
pressed all the way down, the camera will shoot after a person
enters the shooting area and winks.
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Auto Shooting after Detecting New Person (Face SelfTimer)
 Still Images  Movies
Appendix
Index
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(= 63). This is useful when including yourself in group photos or similar
shots.
1 Choose [
].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ], and then
press the [ ] button.
●● Press the [ ][ ] buttons to choose [
and then press the [ ] button.
],
54
2 Compose the shot and press the
shutter button halfway.
●● Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3 Press the shutter button all the way
down.
●● The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
Before Use
Shooting Long Exposures (Long Shutter)
 Still Images  Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Basic Guide
Advanced Guide
Camera Basics
Choose [ ].
Auto Mode / Hybrid Auto
Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ].
Other Shooting Modes
●● The lamp blinks and the self-timer sound
is played.
4 Join the subjects in the shooting
area and look at the camera.
●● After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
●● To cancel shooting after you have
triggered the self-timer, press the
] button.
[
●● Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
●● To change the number of shots, press the [ ][ ] buttons
after choosing [ ] in step 1. [Blink Detection] (= 43) is only
available for the final shot.
P Mode
2 Choose the shutter speed.
Playback Mode
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired shutter
speed (= 26).
Wi-Fi Functions
Setting Menu
3 Check the exposure.
Accessories
●● Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4 Shoot.
Appendix
Index
●● On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
●● With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
●● Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (= 44).
55
●● If the flash fires, your shot may be overexposed. In this case, set
the flash to [ ] and shoot again (= 66).
Before Use
Basic Guide
Advanced Guide
High-Speed Continuous Shooting (High-Speed
Burst)
 Still Images Camera Basics
Auto Mode / Hybrid Auto
Mode
 Movies
Other Shooting Modes
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed,
see “Continuous Shooting Speed” (= 158).
1 Choose [
P Mode
].
Playback Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ].
Wi-Fi Functions
Setting Menu
2 Shoot.
Accessories
●● Hold the shutter button all the way down
to shoot continuously.
●● The recording pixel setting is [ ] (2592 x 1944) and cannot be
changed.
●● Focus, image brightness, and color are determined by the first
shot.
●● Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
●● As more shots are taken, shooting may slow down.
Appendix
Index
56
Shooting in Program AE ([P] Mode)
 Still Images  Movies
You can customize many function settings to suit your preferred shooting
style.
1 Enter [
P Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
] mode.
Auto Mode / Hybrid Auto
Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 49) and choose [ ].
More discerning shots, in your preferred shooting style
Other Shooting Modes
2 Customize the settings as desired
(= 58 – = 68), and then shoot.
●● Instructions in this chapter apply when the mode switch set to [
mode to [ ].
] and
●● [ ]: Program AE; AE: Auto Exposure
●● Before using a function introduced in this chapter in modes other than
[ ], make sure the function is available in that mode (= 148).
P Mode
Playback Mode
●● If adequate exposure cannot be obtained when you press the
shutter button halfway, the shutter speed and aperture value are
displayed in orange. In this case, try adjusting the ISO speed
(= 59) or activating the flash (if subjects are dark, = 66),
which may enable adequate exposure.
●● Movies can be recorded in [ ] mode as well, by pressing the
movie button. However, some FUNC. (= 26) and MENU
(= 27) settings may be automatically adjusted for movie
recording.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
57
Before Use
Changing the Metering Method
Image Brightness (Exposure)
 Still Images Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
Adjusting Image Brightness (Exposure
Compensation)
 Still Images  Movies
 Movies
●● The correction level you specified is now
displayed.
Advanced Guide
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 2 6).
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● The option you configured is now
displayed.
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
●● Press the [ ] button and choose [ ]
in the menu. As you watch the screen,
press the [ ][ ] buttons to adjust
brightness (= 26).
Basic Guide
Other Shooting Modes
P Mode
Evaluative
Center
Weighted
Avg.
Spot
For typical shooting conditions, including backlit
shots. Automatically adjusts exposure to match the
shooting conditions.
Determines the average brightness of light across
the entire image area, calculated by treating
brightness in the central area as more important.
Playback Mode
Metering restricted to within the [ ] (Spot AE
Point frame), displayed in the center of the screen.
Accessories
Wi-Fi Functions
Setting Menu
Appendix
Index
58
Changing the ISO Speed
 Still Images  Movies
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
●● The option you configured is now
displayed.
AUTO
80, 100, 200
400, 800
1600, 3200
Before Use
Correcting Image Brightness (i-Contrast)
Automatically adjusts the ISO speed to suit the
shooting mode and conditions.
For shooting outdoors in fair weather.
For shooting in cloudy conditions, or at twilight.
For shooting night scenes, or in dark rooms.
 Still Images  Movies
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
Basic Guide
Advanced Guide
Camera Basics
●● Press the [
] button, choose
[i-Contrast] on the [ ] tab, and then
choose [Auto] (= 27).
●● Once the setting is complete, [
displayed.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
] is
P Mode
Playback Mode
●● Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
Wi-Fi Functions
Higher ISO speeds give higher sensitivity, and lower speeds give lower
sensitivity.
Setting Menu
●● You can also correct existing images (= 86).
●● To view the automatically determined ISO speed when you have
set the ISO speed to [AUTO], press the shutter button halfway.
●● Although choosing a lower ISO speed may reduce image
graininess, there may be a greater risk of subject and camera
shake in some shooting conditions.
●● Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and increase the flash
range. However, shots may look grainy.
Accessories
Appendix
Index
59
Custom White Balance
Image Colors
Before Use
 Still Images  Movies
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
Adjusting White Balance
 Still Images  Movies
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
●● The option you configured is now
displayed.
Basic Guide
Advanced Guide
●● Follow the steps in “Adjusting White
Balance” (= 60) to choose [ ].
Camera Basics
●● Aim the camera at a plain white subject,
so that the entire screen is white. Press
] button.
the [
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● The tint of the screen changes once the
white balance data has been recorded.
P Mode
●● Colors may look unnatural if you change camera settings after
recording white balance data.
Playback Mode
Wi-Fi Functions
Auto
Automatically sets the optimal white balance for
the shooting conditions.
Day Light
For shooting outdoors in fair weather.
Cloudy
For shooting in cloudy weather or at twilight.
Tungsten
For shooting under ordinary incandescent
lighting.
Fluorescent
For shooting under white fluorescent lighting.
Fluorescent H
For shooting under daylight fluorescent lighting.
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
Custom
For manually setting a custom white balance
(= 60).
●● The option you configured is now
displayed.
Setting Menu
Changing Image Color Tones (My Colors)
 Still Images Accessories
 Movies
Change image color tones as desired, such as converting images to sepia
or black and white.
Appendix
Index
60
–
My Colors Off
Vivid
Neutral
Emphasizes contrast and color saturation,
making images sharper.
Tones down contrast and color saturation for
subdued images.
Sepia
Creates sepia tone images.
B/W
Creates black and white images.
Positive Film
Combines the effects of Vivid Blue, Vivid
Green, and Vivid Red to produce intense yet
natural-looking colors resembling images on
positive film.
Lighter Skin
Tone
Darker Skin
Tone
Vivid Blue
Vivid Green
Vivid Red
Custom Color
Lightens skin tones.
Darkens skin tones.
Emphasizes blues in images. Makes the sky,
ocean, and other blue subjects more vivid.
Emphasizes greens in images. Makes
mountains, foliage, and other green subjects
more vivid.
Emphasizes reds in images. Makes red
subjects more vivid.
Adjust contrast, sharpness, color saturation,
and other qualities as desired (= 61).
Custom Color
Before Use
 Still Images  Movies
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
Advanced Guide
1 Access the setting screen.
●● Follow the steps in “Changing Image
Color Tones (My Colors)” (= 60) to
choose [ ], and then press the [
button.
Basic Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
]
Other Shooting Modes
2 Configure the setting.
P Mode
●● Press the [ ][ ] buttons to choose
an item, and then specify the value by
pressing the [ ][ ] buttons.
Playback Mode
Wi-Fi Functions
●● For stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
●● Press the [
the setting.
Setting Menu
Accessories
] button to complete
Appendix
Index
●● White balance (= 60) cannot be set in [ ] or [ ] modes.
●● With [ ] and [ ] modes, colors other than people’s skin tone
may change. These settings may not produce the expected
results with some skin tones.
61
To restrict the focus to distant subjects, set the camera to [
on the range of focus, see “Shooting Range” (= 158).
Shooting Close-Ups (Macro)
 Still Images Before Use
Shooting Distant Subjects (Infinity)
Shooting Range and Focusing
 Movies
To restrict the focus to subjects at close range, set the camera to [ ]. For
details on the range of focus, see “Shooting Range” (= 158).
]. For details
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press
the [ ] button.
●● Once the setting is complete, [
displayed.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
] is
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button.
Other Shooting Modes
P Mode
●● Once the setting is complete, [ ] is
displayed.
Playback Mode
Wi-Fi Functions
●● If the flash fires, vignetting may occur.
●● When the zoom position is within the range of the yellow bar
below the zoom bar, [ ] turns gray and the camera cannot focus.
●● To prevent camera shake, try mounting the camera on a tripod
and shooting with the camera set to [ ] (= 38).
Setting Menu
Accessories
Appendix
Index
62
Digital Tele-Converter
Before Use
Changing the AF Frame Mode
 Still Images  Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
 Still Images  Movies
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
Basic Guide
Advanced Guide
●● Press the [
] button, choose [AF
Frame] on the [ ] tab, and then choose
the desired option (= 27).
●● Press the [
] button, choose
[Digital Zoom] on the [ ] tab, and then
choose the desired option (= 27).
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● The view is enlarged and the zoom factor
is displayed on the screen.
P Mode
Face AiAF
●● The digital tele-converter cannot be used with digital zoom
(= 36) or AF-point zoom (= 43).
●● The shutter speed may be equivalent when you move the zoom
] for maximum telephoto, and when
lever all the way toward [
you zoom in to enlarge the subject to the same size following
step 2 in “Zooming In Closer on Subjects (Digital Zoom)”
(= 36).
Playback Mode
 Still Images  Movies
Wi-Fi Functions
●● Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
Setting Menu
●● After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other
detected faces.
●● When the camera detects movement, frames will follow moving
subjects, within a certain range.
Accessories
Appendix
Index
●● After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
63
●● If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
●● If faces are not detected when Servo AF (= 65) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
●● Examples of faces that cannot be detected:
-- Subjects that are distant or extremely close
-- Subjects that are dark or light
-- Faces in profile, at an angle, or partly hidden
●● The camera may misinterpret non-human subjects as faces.
●● No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
●● Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● When the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
●● If no subject is detected, [
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
] is displayed.
P Mode
●● To cancel tracking, press the [ ] button
again.
Playback Mode
3 Shoot.
Choosing Subjects to Focus On (Tracking AF)
 Still Images 2 Choose a subject to focus on.
 Movies
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
●● Follow the steps in “Changing the AF
Frame Mode” (= 63) to choose
[Tracking AF].
●● [ ] is displayed in the center of the
screen.
Wi-Fi Functions
●● Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(= 65).
Setting Menu
Accessories
●● Press the shutter button all the way down
to shoot.
●● Even after your shot, [ ] is still displayed
and the camera continues to track the
subject.
Appendix
Index
●● [Servo AF] (= 65) is set to [On] and cannot be changed.
●● Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
●● [AF-Point Zoom] on the [ ] tab is not available.
●● [ ] and [ ] are not available.
64
●● The camera can detect subjects even if you press the shutter
button halfway without pressing the [ ] button. After your shot,
[ ] is displayed in the center of the screen.
Center
 Still Images  Movies
One AF frame is displayed in the center. Effective for reliable focusing.
●● A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway.
●● To reduce the AF frame size, press the [
] button and set
[AF Frame Size] on the [ ] tab to [Small] (= 27).
●● The AF frame size is set to [Normal] when you use the digital
zoom (= 36) or digital tele-converter (= 63).
●● To compose shots so that subjects are positioned at the edge or
in a corner, first aim the camera to capture the subject in an AF
frame, and then hold the shutter button halfway down. As you
continue to hold the shutter button halfway, recompose the shot
as desired, and then press the shutter button all the way down
(Focus Lock).
●● The AF frame position is enlarged when you press the shutter
button halfway with [AF-Point Zoom] (= 43) set to [On].
Shooting with Servo AF
Before Use
 Still Images  Movies
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
Basic Guide
Advanced Guide
1 Configure the setting.
●● Press the [
AF] on the [
(= 27).
Camera Basics
] button, choose [Servo
] tab, and then choose [On]
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
2 Focus.
P Mode
●● The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
Playback Mode
Wi-Fi Functions
●● Focusing may not be possible in some shooting conditions.
●● In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
●● If adequate exposure cannot be obtained, the shutter speed
and aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
●● [AF-Point Zoom] on the [ ] tab (= 27) is not available.
●● Not available when using the self-timer (= 37).
Setting Menu
Accessories
Appendix
Index
65
Changing the Focus Setting
Before Use
Flash
 Still Images Basic Guide
 Movies
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
●● Press the [
] button, choose
[Continuous AF] on the [ ] tab, and then
choose [Off] (= 27).
Advanced Guide
Changing the Flash Mode
 Still Images Camera Basics
 Movies
You can change the flash mode to match the shooting scene. For details
on the flash range, see “Flash Range” (= 158).
Auto Mode / Hybrid Auto
Mode
1 Raise the flash.
Other Shooting Modes
●● Move the [ ] switch.
P Mode
2 Configure the setting.
On
Off
Helps avoid missing sudden photo opportunities, because
the camera constantly focuses on subjects until you press the
shutter button halfway.
Conserves battery power, because the camera does not focus
constantly.
Playback Mode
●● Press the [ ] button, press the [ ][ ]
buttons to choose a flash mode, and then
press the [ ] button.
Wi-Fi Functions
●● The option you configured is now
displayed.
Setting Menu
Accessories
●● The setting screen cannot be accessed by pressing the [ ] button
when the flash is lowered. Move the [ ] switch to raise the flash,
then configure the setting.
Appendix
Index
66
Auto
Fires automatically in low-light conditions.
Before Use
Other Settings
Basic Guide
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
●● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (= 44).
●● In [ ] mode, even after the flash fires, ensure that the main
subject does not move until the shutter sound is finished playing.
Changing the Compression Ratio (Image Quality)
 Still Images Advanced Guide
Camera Basics
 Movies
Auto Mode / Hybrid Auto
Mode
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as
follows. For guidelines on how many shots at each compression ratio can
fit on a memory card, see “Number of Shots per Memory Card” (= 157).
Other Shooting Modes
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
P Mode
Playback Mode
Wi-Fi Functions
Off
Setting Menu
For shooting without the flash.
●● If a blinking [ ] icon is displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions,
mount the camera on a tripod or take other measures to keep it
still.
Accessories
Appendix
Index
67
Before Use
Changing the IS Mode Settings
 Still Images  Movies
●● Choose [Shoot Only] in steps 1 – 2
of “Deactivating Image Stabilization”
(= 44).
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
●● If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
●● The setting is changed to [Continuous] for movie recording.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
68
Before Use
Viewing
 Still Images  Movies
After shooting images or movies, you can view them on the screen as
follows.
Advanced Guide
Camera Basics
1 Enter Playback mode.
Playback Mode
●● Press the [
Have fun reviewing your shots, and browse or edit them in many ways
●● To prepare the camera for these operations, press the [
enter Playback mode.
Basic Guide
] button to
●● It may not be possible to play back or edit images that were
renamed or already edited on a computer, or images from other
cameras.
Auto Mode / Hybrid Auto
Mode
] button.
●● Your last shot is displayed.
Other Shooting Modes
2 Choose an image.
P Mode
●● To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
Index
●● To return to single-image display, press
the [ ] button.
●● To browse images grouped by shooting
date, press the [ ][ ] buttons in Scroll
Display mode.
69
●● Movies are identified by a [
To play movies, go to step 3.
3
] icon.
Play movies.
●● To start playback, press the [ ] button,
press the [ ][ ] buttons to choose [ ],
and then press the [ ] button again.
●● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
] tab
●● To deactivate Scroll Display, choose MENU (= 27) > [
> [Scroll Display] > [Off].
●● To have the most recent shot displayed when you enter Playback
] tab > [Resume] > [Last
mode, choose MENU (= 27) > [
shot].
●● To change the transition shown between images, access MENU
] tab >
(= 27) and choose your desired effect on the [
[Transition].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Switching Display Modes
4 Adjust the volume.
●● Press the [
volume.
][
P Mode
 Still Images ] buttons to adjust the
●● To adjust the volume when the volume
indicator (1) is no longer displayed, press
the [ ][ ] buttons.
Playback Mode
 Movies
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (= 147).
Wi-Fi Functions
Setting Menu
Accessories
No Information Display
(1)
Appendix
5 Pause playback.
●● To pause or resume playback, press the
[ ] button.
●● After the movie is finished, [
displayed.
Simple Information Display
Index
] is
Detailed Information Display
70
Overexposure Warning (for Image Highlights)
 Still Images  Movies
●● UTC: Coordinated Universal Time, essentially the same as
Greenwich Mean Time
 Movies
Viewing Short Movies Created When Shooting
Still Images (Digest Movies)
Before Use
Basic Guide
Washed-out highlights in the image flash on the screen in detailed
information display (= 70).
Histogram
 Still Images ●● The graph in detailed information display
(= 70) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
 Still Images View digest movies recorded automatically in [
day of still image shooting.
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
 Movies
] mode (= 32) on a
Other Shooting Modes
1 Choose an image.
P Mode
●● Still images shot in [ ] mode are
labeled with [
] icon.
Playback Mode
Wi-Fi Functions
GPS Information Display
 Still Images  Movies
●● Using a smartphone connected to the
camera via Wi-Fi, you can geotag images
on the camera, adding information such
as latitude, longitude, and elevation
(= 114). You can review this information
in the GPS information display.
●● Latitude, longitude, elevation, and UTC
(shooting date and time) are listed from
top to bottom.
●● GPS information display is not available for images that lack this
information.
●● [---] is shown instead of numerical values for items not available
on your smartphone or items not recorded correctly.
Setting Menu
2 Play the digest movie.
Accessories
●● Press the [ ] button, and then choose
[ ] in the menu (= 26).
●● The digest movie created on the day of
still image shooting is played back, from
the beginning.
Appendix
Index
●● After a moment, [
] will no longer be displayed when
you are using the camera with information display deactivated
(= 70).
71
Viewing by Date
1 Choose a movie.
●● Press the [
] button, choose [List/
Play Digest Movies] on the [
] tab, and
then choose a date (= 27).
2 Play the movie.
●● Press the [
Before Use
Browsing and Filtering Images
Digest movies can be viewed by date.
] button to start playback.
Basic Guide
Advanced Guide
Navigating through Images in an Index
 Still Images Camera Basics
 Movies
By displaying multiple images in an index, you can quickly find the images
you are looking for.
Auto Mode / Hybrid Auto
Mode
1 Display images in an index.
Other Shooting Modes
●● Move the zoom lever toward [ ] to
display images in an index. Moving the
lever again will increase the number of
images shown.
P Mode
Playback Mode
●● To display fewer images, move the zoom
lever toward [ ]. Fewer images are
shown each time you move the lever.
Wi-Fi Functions
Setting Menu
2 Choose an image.
●● Press the [
an image.
][
Accessories
][ ][ ] buttons to choose
●● An orange frame is displayed around the
selected image.
●● Press the [ ] button to view the selected
image in single-image display.
Appendix
Index
72
Finding Images Matching Specified Conditions
 Still Images  Movies
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
(= 77) or delete (= 79) these images all at once.
People
Displays images with detected faces.
Shot Date
Displays the images shot on a specific date.
Favorites
Displays images tagged as favorites (= 83).
Still Image/
Movie
Displays still images, movies, or movies shot in
[ ] mode (= 32).
●● To hide or view other information, press the [ ] button in step 2.
●● Options for viewing the images found (in step 2) include
“Navigating through Images in an Index” (= 72), “Magnifying
Images” (= 75), and “Viewing Slideshows” (= 75). You
can protect, erase, or print all images found or add them to
a photobook by choosing [Select All Images in Search] in
“Protecting Images” (= 77), “Erasing All Images” (= 80),
“Adding Images to the Print List (DPOF)” (= 137), or “Adding
Images to a Photobook” (= 139).
●● If you edit images and save them as new images (= 84 –
= 88), a message is displayed, and the images that were
found are no longer shown.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
1 Choose a search condition.
Playback Mode
●● Press the [ ] button, choose [ ] in the
menu, and choose a condition (= 26).
Wi-Fi Functions
●● When you have selected [ ] or [ ],
choose the condition by pressing the
[ ][ ][ ][ ] buttons on the screen
displayed, and then press the [ ] button.
Setting Menu
Accessories
2 View the filtered images.
Appendix
●● Images matching your conditions are
displayed in yellow frames. To view only
these images, press the [ ][ ] buttons.
●● To cancel filtered display, choose [
step 1.
Index
] in
●● When the camera has found no corresponding images for some
conditions, those conditions will not be available.
73
Viewing Individual Images in a Group
 Still Images  Movies
Images shot in [
] or [ ] mode (= 47, = 56) are grouped, and
only the first image is displayed. However, you can also view the images
individually.
1
Choose a grouped image.
●● Press the [ ][ ] buttons to choose an
image labeled with [
].
2 Choose [
].
●● During group playback (step 3), you can use the menu functions
accessed by pressing the [ ] button. You can also browse
through images quickly “Navigating through Images in an Index”
(= 72) and magnify them “Magnifying Images” (= 75). By
choosing [All Images in Group] for “Protecting Images” (= 77),
“Erasing All Images” (= 80), “Adding Images to the Print List
(DPOF)” (= 137), or “Adding Images to a Photobook” (= 139),
all images in the group can be manipulated at once.
●● To ungroup images so that they are displayed only as single still
] tab > [Group Images] >
images, choose MENU (= 27) > [
[Off] (= 27). However, grouped images cannot be ungrouped
during individual playback.
] mode, the simultaneous display after step 2 in “Enjoying
●● In [
a Variety of Images from Each Shot (Creative Shot)” (= 47) is
only shown immediately after you shoot.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
●● Press the [ ] button, and then choose
[ ] in the menu (= 26).
Wi-Fi Functions
Setting Menu
Accessories
3 View images in the group
Appendix
individually.
●● Pressing the [ ][ ] buttons will display
only images in the group.
●● To cancel group playback, press the [
button, choose [ ] in the menu, and
press the [ ] button again (= 26).
Index
]
74
Before Use
Viewing Slideshows
Image Viewing Options
 Still Images Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
Magnifying Images
 Still Images  Movies
1 Magnify an image.
●● Moving the zoom lever toward [ ] will
zoom in and magnify the image, and
[
] is displayed. You can magnify
images up to about 10x by continuing to
hold the zoom lever.
●● The approximate position of the displayed
area (1) is shown for reference.
●● To zoom out, move the zoom lever
toward [ ]. You can return to singleimage display by continuing to hold it.
(1)
 Movies
2 Move the display position and
switch images as needed.
●● To move the display position, press the
[ ][ ][ ][ ] buttons.
Basic Guide
Advanced Guide
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 26).
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● The slideshow will start after [Loading
image] is displayed for a few seconds.
●● Press the [
slideshow.
Other Shooting Modes
] button to stop the
P Mode
●● The camera’s power-saving functions (= 25) are deactivated
during slideshows.
Playback Mode
●● To pause or resume slideshows, press the [ ] button.
●● You can switch to other images during playback by pressing the
[ ][ ] buttons. For fast-forward or fast-rewind, hold the [ ][ ]
buttons down.
●● In filtered display (= 73), only images matching search
conditions are played.
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
] is displayed, you can
●● While [
switch to [
] by pressing the [ ]
button. To switch to other images while
zoomed, press the [ ][ ] buttons. Press
the [ ] button again to restore the
original setting.
●● You can return to single-image display from magnified display by
] button.
pressing the [
75
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1 Access the setting screen.
●● Press the [
] button, and then
choose [Slideshow] on the [
] tab
(= 27).
2 Configure the setting.
●● Choose a menu item to configure, and
then choose the desired option (= 27).
●● To start the slideshow with your settings,
choose [Start] and press the [ ] button.
●● To return to the menu screen, press the
] button.
[
●● [Play Time] cannot be modified when [Bubble] is chosen in
[Effect].
Auto Playback of Related Images (Smart Shuffle)
 Still Images  Movies
Based on the current image, the camera offers four images that you may
wish to view. After you choose to view one of those images, the camera
offers four more images. This is an enjoyable way to play back images in
an unexpected order. Try this feature after you have taken many shots, in
many kinds of scenes.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
1 Choose Smart Shuffle.
Other Shooting Modes
●● Press the [ ] button, and then choose
[ ] in the menu (= 26).
P Mode
●● Four candidate images are displayed.
Playback Mode
2 Choose an image.
Wi-Fi Functions
●● Press the [ ][ ][ ][ ] buttons to choose
the image you want to view next.
Setting Menu
●● Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
●● For full-screen display of the center
image, press the [ ] button. To restore
the original display, press the [ ] button
again.
Accessories
Appendix
Index
] button to restore
●● Press the [
single-image display.
●● Smart Shuffle is not available in the following cases:
-- There are less than 50 shots taken with this camera
-- An unsupported image is currently displayed
-- Images are shown in filtered display (= 73)
-- During group playback (= 74)
76
Before Use
Using the Menu
Protecting Images
 Still Images  Movies
Protect important images to prevent accidental erasure (= 79).
●● Press the [ ] button, and then choose
[
] in the menu (= 26). [Protected]
is displayed.
●● To cancel protection, repeat this process
] again, and then press
and choose [
the [ ] button.
●● Protected images on a memory card will be erased if you format
the card (= 121, = 122).
Basic Guide
1 Access the setting screen.
●● Press the [
] button and choose
[Protect] on the [
] tab (= 27).
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
2 Choose a selection method.
●● Choose a menu item and an option as
desired (= 27).
P Mode
●● To return to the menu screen, press the
] button.
[
Playback Mode
Wi-Fi Functions
●● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, first cancel protection.
Setting Menu
Accessories
Appendix
Index
77
Choosing Images Individually
Before Use
Selecting a Range
Basic Guide
1 Choose [Select].
●● Following step 2 in “Using the Menu”
(= 77), choose [Select] and press the
[ ] button.
2 Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
1 Choose [Select Range].
●● Following step 2 in “Using the Menu”
(= 77), choose [Select Range] and
press the [ ] button.
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
2 Choose a starting image.
●● Press the [
] button.
Other Shooting Modes
P Mode
●● To cancel protection, press the [ ] button
again. [ ] is no longer displayed.
●● Repeat this process to specify other
images.
3
Playback Mode
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Wi-Fi Functions
Protect the image.
Setting Menu
●● Press the [
] button. A confirmation
message is displayed.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Accessories
3 Choose an ending image.
●● Press the [ ] button to choose [Last
image], and then press the [ ] button.
Appendix
Index
●● Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
●● Images before the first image cannot be
selected as the last image.
78
4 Protect the images.
●● Press the [ ] button to choose [Protect],
and then press the [ ] button.
Before Use
Erasing Images
 Still Images  Movies
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered. However,
protected images (= 77) cannot be erased.
●● To cancel protection for groups of images, choose [Unlock] in
step 4.
Protecting All Images at Once
1 Choose [Protect All Images].
●● Following step 2 in “Using the Menu”
(= 77), choose [Protect All Images]
and press the [ ] button.
2 Protect the images.
Basic Guide
Advanced Guide
Camera Basics
1 Choose an image to erase.
Auto Mode / Hybrid Auto
Mode
●● Press the [ ][ ] buttons to choose an
image.
Other Shooting Modes
2 Erase the image.
P Mode
●● Press the [ ] button, and then choose
[ ] in the menu (= 26).
Playback Mode
●● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [Erase], and
then press the [ ] button.
Wi-Fi Functions
●● The current image is now erased.
Setting Menu
●● To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
Accessories
Appendix
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Index
Clearing All Protection at Once
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of “Protecting
All Images at Once”, and then complete step 2.
79
Choosing Images Individually
Erasing All Images
You can choose multiple images to erase at once. Be careful when
erasing images, because they cannot be recovered. However, protected
images (= 77) cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
●● Press the [
] button, and then
choose [Erase] on the [
] tab (= 27).
2 Choose a selection method.
●● Choose a menu item and an option as
desired (= 27).
●● To return to the menu screen, press the
] button.
[
1 Choose [Select].
●● Following step 2 in “Choosing a Selection
Method” (= 80), choose [Select] and
press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
2 Choose an image.
Auto Mode / Hybrid Auto
Mode
●● Once you choose an image following
step 2 in “Choosing Images Individually”
(= 78), [ ] is displayed.
Other Shooting Modes
●● To untag the image, press the [ ] button
again. [ ] is no longer displayed.
P Mode
●● Repeat this process to specify other
images.
Playback Mode
3 Erase the image.
Wi-Fi Functions
●● Press the [
] button. A confirmation
message is displayed.
Setting Menu
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Accessories
Appendix
Index
80
Selecting a Range
1 Choose [Select Range].
●● Following step 2 in “Choosing a Selection
Method” (= 80), choose [Select
Range] and press the [ ] button.
2
Choose images.
●● Follow steps 2 – 3 in “Selecting a Range”
(= 78) to specify images.
Before Use
Rotating Images
 Still Images  Movies
Change the orientation of images and save them as follows.
1 Choose [
Basic Guide
Advanced Guide
].
Camera Basics
●● Press the [ ] button, and then choose
[ ] in the menu (= 26).
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
3 Erase the images.
●● Press the [ ] button to choose [Erase],
and then press the [ ] button.
Specifying All Images at Once
P Mode
2 Rotate the image.
Playback Mode
●● Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
Wi-Fi Functions
Setting Menu
Accessories
1 Choose [Select All Images].
●● Following step 2 in “Choosing a Selection
Method” (= 80), choose [Select All
Images] and press the [ ] button.
Appendix
Index
2 Erase the images.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
81
Using the Menu
Before Use
Deactivating Auto Rotation
1 Choose [Rotate].
●● Press the [
[Rotate] on the [
] button and choose
] tab (= 27).
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
●● Press the [
Rotate] on the [
[Off] (= 27).
] button, choose [Auto
] tab, and then choose
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
2 Rotate the image.
●● Press the [ ][ ] buttons to choose an
image.
●● The image is rotated 90° each time you
press the [ ] button.
●● To return to the menu screen, press the
] button.
[
P Mode
●● Images cannot be rotated (= 81) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in
the original orientation.
●● In Smart Shuffle (= 76) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and
rotated images will be displayed in the rotated orientation.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Rotation is not possible when [Auto Rotate] is set to [Off]
(= 82).
Accessories
Appendix
Index
82
2 Choose an image.
Tagging Images as Favorites
 Still Images  Movies
You can organize images by tagging them as favorites. By choosing a
category in filtered playback, you can restrict the following operations to
all of those images.
●● “Viewing” (= 69), “Viewing Slideshows” (= 75), “Protecting
Images” (= 77), “Erasing Images” (= 79), “Adding Images to
the Print List (DPOF)” (= 137), “Adding Images to a Photobook”
(= 139)
●● Press the [ ] button, and then choose
[ ] in the menu (= 26).
●● [Tagged as Favorite] is displayed.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
●● To cancel protection, press the [ ] button
again. [ ] is no longer displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Repeat this process to choose additional
images.
3
Auto Mode / Hybrid Auto
Mode
Configure the setting.
Other Shooting Modes
●● Press the [
] button. A confirmation
message is displayed.
P Mode
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Playback Mode
●● To cancel protection, repeat this process
and choose [ ] again, and then press
the [ ] button.
Wi-Fi Functions
●● Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
Using the Menu
Setting Menu
Accessories
1 Choose [Favorites].
●● Press the [
] button and choose
[Favorites] on the [
] tab (= 27).
●● Favorite images will have a three-star rating (
)
when transferred to computers running Windows 8 or Windows 7.
(Does not apply to movies.)
Appendix
Index
83
4 Save the new image.
Editing Still Images
Before Use
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● The image is now saved as a new file.
●● Image editing (= 84 – = 86) is only available when the
memory card has sufficient free space.
Basic Guide
Advanced Guide
Camera Basics
5 Review the new image.
Resizing Images
Auto Mode / Hybrid Auto
Mode
●● Press the [
] button. [Display new
image?] is displayed.
 Still Images  Movies
Save a copy of images at a lower number of recording pixels.
P Mode
●● The saved image is now displayed.
1 Choose [Resize].
●● Press the [
] button and choose
[Resize] on the [
] tab (= 27).
Other Shooting Modes
●● Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
Playback Mode
●● Editing is not possible for images shot at a recording pixel setting
of [ ] (= 41).
Wi-Fi Functions
Setting Menu
2 Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3 Choose an image size.
●● Press the [ ][ ] buttons to choose the
size, and then press the [ ] button.
●● [Save new image?] is displayed.
●● Images cannot be resized to a higher number of recording pixels.
Accessories
Appendix
Cropping
 Still Images  Movies
Index
You can specify a portion of an image to save as a separate image file.
1 Choose [Cropping].
●● Press the [
] button, and then
choose [Cropping] on the [
] tab
(= 27).
84
2 Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
(1)
(2) (3)
3 Adjust the cropping area.
●● A frame is displayed around the portion of
the image to be cropped (1).
●● The original image is shown in the upper
left, and a preview of the image as
cropped (2) is shown in the lower right.
You can also see the number of recording
pixels after cropping (3).
●● To resize the frame, move the zoom
lever.
●● To move the frame, press the
[ ][ ][ ][ ] buttons.
●● To change the frame orientation, press
the [ ] button.
●● Press the [
] button.
4 Save as a new image and review.
Before Use
Changing Image Color Tones (My Colors)
 Still Images  Movies
You can adjust image colors and then save the edited image as a
separate file. For details on each option, see “Changing Image Color
Tones (My Colors)” (= 60).
1
Basic Guide
Advanced Guide
Camera Basics
Choose [My Colors].
Auto Mode / Hybrid Auto
Mode
●● Press the [
] button, and then
choose [My Colors] on the [
] tab
(= 27).
Other Shooting Modes
P Mode
2 Choose an image.
Playback Mode
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Wi-Fi Functions
3 Choose an option.
Setting Menu
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
Accessories
●● Follow steps 4 – 5 in “Resizing Images”
(= 84).
●● Editing is not possible for images shot at a recording pixel setting
of [ ] (= 41) or resized to [ ] (= 84).
●● Images supported for cropping will have the same aspect ratio
after cropping.
●● Cropped images will have a lower number of recording pixels than
uncropped images.
Appendix
4 Save as a new image and review.
Index
●● Follow steps 4 – 5 in “Resizing Images”
(= 84).
●● Image quality of pictures you repeatedly edit this way will be
a little lower each time, and you may not be able to obtain the
desired color.
●● The color of images edited using this function may vary slightly
from the color of images shot using My Colors (= 60).
85
Correcting Image Brightness (i-Contrast)
 Still Images Before Use
●● If [Auto] does not produce the expected results, try correcting
images using [Low], [Medium], or [High].
Basic Guide
 Movies
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1 Choose [i-Contrast].
●● Press the [
] button, and then
choose [i-Contrast] on the [
] tab
(= 27).
Advanced Guide
Correcting Red-Eye
 Still Images Camera Basics
 Movies
Auto Mode / Hybrid Auto
Mode
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
Other Shooting Modes
1 Choose [Red-Eye Correction].
●● Press the [
] button, and then
choose [Red-Eye Correction] on the [
tab (= 27).
P Mode
]
Playback Mode
2 Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3 Choose an option.
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4 Save as a new image and review.
●● Follow steps 4 – 5 in “Resizing Images”
(= 84).
Wi-Fi Functions
2 Choose an image.
Setting Menu
●● Press the [ ][ ] buttons to choose an
image.
Accessories
3 Correct the image.
●● Press the [
] button.
●● Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
Appendix
Index
●● Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
(= 75).
●● For some images, correction may be inaccurate or may cause
images to appear grainy.
●● Images may look grainy after repeated editing using this function.
86
4 Save as a new image and review.
●● The image is now saved as a new file.
●● Follow step 5 in “Resizing Images”
(= 84).
Before Use
Editing Movies
●● Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
 Still Images  Movies
Advanced Guide
You can remove unneeded portions from the beginning and end of
movies.
1 Choose [
Camera Basics
].
●● Following steps 1 – 5 in “Viewing”
(= 69), choose [ ] and press the [
button.
●● Some images may not be corrected accurately.
●● To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be
erased.
●● Protected images cannot be overwritten.
Basic Guide
Auto Mode / Hybrid Auto
Mode
]
Other Shooting Modes
●● The movie editing panel and editing bar
are now displayed.
P Mode
Playback Mode
2 Specify portions to cut.
(1)
●● (1) is the movie editing panel, and (2) is
the editing bar.
●● Press the [
or [ ].
(2)
][
] buttons to choose [
Wi-Fi Functions
Setting Menu
]
●● To view the portions you can cut
(identified by [ ] on the screen), press
the [ ][ ] buttons to move [ ]. Cut the
beginning of the movie (from [ ]) by
choosing [ ], and cut the end of the
movie by choosing [ ].
Accessories
Appendix
Index
●● If you move [ ] to a position other than a
[ ] mark, in [ ] the portion before the
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
87
3 Review the edited movie.
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button. The edited
movie is now played.
●● To edit the movie again, repeat step 2.
●● To cancel editing, press the [ ][ ]
buttons to choose [ ]. Press the [ ]
button, press the [ ][ ] buttons to choose
[OK], and then press the [ ] button
again.
Before Use
Editing Digest Movies
 Still Images  Movies
Individual chapters (clips) (= 32) recorded in [ ] mode can be
erased, as needed. Be careful when erasing clips, because they cannot
be recovered.
1
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
●● Press the [ ][ ] buttons to choose [
[ ], and then press the [ ] button.
●● The movie is now saved as a new file.
●● To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be
erased.
●● If the memory card lacks sufficient space, only [Overwrite] will be
available.
●● Movies may not be saved if the battery pack runs out while saving
is in progress.
●● When editing movies, you should use a fully charged battery pack
or an AC adapter kit (sold separately, = 126).
Advanced Guide
Camera Basics
Select the clip to erase.
●● Follow steps 1 – 2 in “Viewing Short
Movies Created When Shooting Still
Images (Digest Movies)” (= 71) to
play a movie created in [ ] mode, and
then press the [ ] button to access the
movie control panel.
4 Save the edited movie.
Basic Guide
2 Choose [
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
] or
Wi-Fi Functions
].
Setting Menu
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
Accessories
●● The selected clip is played back
repeatedly.
3
Confirm erasure.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Appendix
Index
●● The clip is erased, and the short movie is
overwritten.
●● [ ] is not displayed if you select a clip when the camera is
connected to a printer.
88
Available Wi-Fi Features
You can send and receive images and control the camera remotely by
connecting it to these devices and services via Wi-Fi.
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible
devices, and use the camera with Web services
●● Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN)
Precautions” (= 161).
Before Use
Basic Guide
Advanced Guide
●● Smartphones and Tablets
Send images to smartphones and tablet computers that have Wi-Fi
functions. You can also shoot remotely and geotag your shots from a
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other
compatible devices are collectively referred to as “smartphones”.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Computer
Use software to save camera images to a computer connected via
Wi-Fi.
P Mode
●● Web Services
Add your account information to the camera for CANON iMAGE
GATEWAY online photography service or other Web services to
send camera images to the services. Unsent images on the camera
can also be sent to a computer or Web service via CANON iMAGE
GATEWAY.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Printers
Send images wirelessly to a PictBridge-compatible printer (supporting
DPS over IP) to print them.
●● Another Camera
Send images wirelessly between Wi-Fi compatible Canon cameras.
Accessories
Appendix
Index
89
Sending Images to a Smartphone
There are several ways to connect the camera to a smartphone and send
images.
●● Connect via NFC (= 90)
Simply touch an NFC-compatible Android smartphone (OS version 4.0
or later) against the camera to connect the devices.
●● Connect to a device assigned to the [ ] button (= 93)
Simply press the [ ] button to connect the devices. This simplifies
sending images to a smartphone (= 93). Note that only one
smartphone can be assigned to the [ ] button.
●● Connect via the Wi-Fi menu (= 94)
You can connect the camera to a smartphone as you would connect it
to a computer or other device. Multiple smartphones can be added.
Before connecting to the camera, you must install the free dedicated
Camera Connect app on the smartphone. For details on this application
(supported smartphones and included functions), refer to the Canon
website.
●● If you have a Wi-Fi compatible Canon camera, and connect
the camera and a smartphone over a Wi-Fi connection, we
recommend changing your smartphone application from
CameraWindow to Camera Connect.
Sending Images to an NFC-Compatible
Smartphone
Before Use
Using an NFC-compatible Android smartphone (OS version 4.0 or later)
simplifies the process of installing Camera Connect and connecting the
devices via NFC.
Operation once the devices are connected via NFC varies depending on
the camera mode when the devices are touched together.
Advanced Guide
Basic Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● If the camera is off or in Shooting mode when the devices are touched
together, you can choose and send images on the image selection
screen. Once the devices are connected, you can also shoot remotely
and geotag your shots (= 114). It’s easy to reconnect to recent
devices, which are listed in the Wi-Fi menu.
Other Shooting Modes
P Mode
●● If the camera is in playback mode when the devices are touched
together a screen showing a list of images to be sent is displayed, so
you can choose and send images.
Playback Mode
Wi-Fi Functions
Follow the instructions in the following section for NFC-initiated connection
to a camera that is off or in Shooting mode.
Setting Menu
Accessories
Connecting via NFC When Camera Is Off or in
Shooting Mode
1 Install Camera Connect.
Appendix
Index
●● Activate NFC on the smartphone and
touch the devices N-Mark ( ) together
to start Google Play on the smartphone
automatically. Once the Camera Connect
download page is displayed, download
and install the app.
90
2 Establish the connection.
●● Make sure the camera is off or in
Shooting mode.
●● Touch the N-Mark ( ) on the smartphone
with Camera Connect installed against
the camera’s N-Mark.
●● The camera starts up automatically.
●● After [Device Nickname] is displayed,
press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● Camera Connect is started on the
smartphone.
●● The camera and smartphone are
connected automatically.
3 Adjust the privacy setting.
●● After this screen is displayed, press the
[ ][ ] buttons to choose [Yes], and then
press the [ ] button.
●● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.
4 Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
Camera Basics
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
P Mode
Auto Mode / Hybrid Auto
Mode
Playback Mode
●● Image transfer will begin. The screen
darkens during image transfer.
Wi-Fi Functions
●● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
●● To end the connection, press the
] button, press the [ ][ ] buttons
[
on the confirmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
Setting Menu
Accessories
Appendix
Index
91
●● When using NFC, keep the following points in mind.
-- Avoid strong impact between the camera and smartphone. This
may damage the devices.
-- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection is not
established, keep the devices together until the camera screen
is updated.
-- If you try to connect while the camera is turned off, a message
may be displayed on the smartphone screen asking for the
camera to be turned on. Turn the camera on again, and then
touch the devices together again.
-- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
●● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
●● Once you have registered a smartphone, you can change privacy
settings for it on the camera (= 116).
●● Connections require that a memory card be in the camera.
●● You can change the camera nickname displayed on the screen in
step 2 (= 91).
●● Not all NFC-compatible smartphones have an N-Mark ( ). For
details, refer to the smartphone user manual.
●● You can also send multiple images at once and change the image
size before sending (= 109).
●● You can send the current image by choosing [Send this image] on
the screen in step 4.
●● To disable NFC connections, choose MENU (= 27) > [ ] tab
> [Wi-Fi Settings] > [NFC] > [Off].
Connecting via NFC When Camera Is in Playback
Mode
●● Press the [
on.
] button to turn the camera
●● Touch the N-Mark ( ) on the smartphone
with Camera Connect installed (= 90)
against the camera’s N-Mark.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
Other Shooting Modes
●● To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
P Mode
●● Repeat this process to choose additional
images.
Playback Mode
●● After you finish choosing images, press
] button.
the [
Wi-Fi Functions
●● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
Setting Menu
●● The image is sent. The connection is
ended automatically after the image is
sent.
Accessories
Appendix
●● If during connection a message on the camera requests you to
enter the nickname, follow step 2 in “Sending Images to an NFCCompatible Smartphone” (= 90) to enter it.
●● The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
●● You can preset images to transfer at your desired size (= 109).
Index
92
Sending to a Smartphone Assigned to the Button
Once you have connected to a smartphone initially by pressing the [ ]
button, you can simply press the [ ] button after that to connect again for
viewing and saving camera images on your connected device.
These steps show how to use the camera as an access point, but you can
also use an existing access point (= 96).
1 Install Camera Connect.
3 Choose [
].
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● The camera’s SSID is displayed.
Auto Mode / Hybrid Auto
Mode
●● For an iPhone, iPad, or iPod touch, find
Camera Connect in the App Store and
download and install the app.
●● For Android smartphones, find Camera
Connect in Google Play and download
and install the app.
2 Press the [
] button.
●● Press the [ ] button.
●● After [Device Nickname] is displayed,
press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
P Mode
4 Connect the smartphone to the
Playback Mode
network.
Wi-Fi Functions
●● In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
Setting Menu
Accessories
5 Start Camera Connect.
●● Start Camera Connect on the
smartphone.
●● After the camera recognizes the
smartphone, a device selection screen is
displayed.
Appendix
Index
93
6 Choose the smartphone to connect
to.
●● Press the [ ][ ] buttons to choose the
smartphone, and then press the [ ]
button.
●● After a connection is established with
the smartphone, the smartphone name
is displayed on the camera. (This screen
will close in about one minute.)
7 Import images.
●● Use the smartphone to import images
from the camera to the smartphone.
●● Use the smartphone to end the
connection; the camera will automatically
turn off.
●● Connections require that a memory card be in the camera.
●● You can change the camera nickname displayed on the screen in
step 2 (= 93).
●● For better security, you can display a password on the screen in
step 3 by accessing MENU (= 27) and choosing [ ] tab >
[Wi-Fi Settings] > [Password] > [On]. In this case, in the password
field on the smartphone in step 4, enter the password displayed
on the camera.
●● One smartphone can be registered to the [ ] button. To assign a
different one, first clear the current one in MENU (= 27) > [ ]
tab > [Mobile Device Connect Button].
●● Not all NFC-compatible smartphones have an N-Mark ( ). For
details, refer to the smartphone user manual.
Adding a Smartphone Using the Wi-Fi Menu
These steps show how to use the camera as an access point, but you can
also use an existing access point (= 96).
1
Before Use
Basic Guide
Advanced Guide
Install Camera Connect.
Camera Basics
●● For an iPhone, iPad, or iPod touch, find
Camera Connect in the App Store and
download and install the app.
Auto Mode / Hybrid Auto
Mode
●● For Android smartphones, find Camera
Connect in Google Play and download
and install the app.
Other Shooting Modes
P Mode
2 Access the Wi-Fi menu.
●● Press the [
on.
●● Press the [
Playback Mode
] button to turn the camera
Wi-Fi Functions
] button.
●● If the [Device Nickname] screen is
displayed, choose [OK] (= 93).
3 Choose [
Setting Menu
Accessories
].
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
Appendix
Index
94
4 Choose [Add a Device].
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
6 Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
●● The camera’s SSID is displayed.
●● Choose the smartphone to connect to,
as described in steps 4 – 6 of “Sending
to a Smartphone Assigned to the Button”
(= 93).
5 Adjust the privacy setting.
●● Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
●● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.
Before Use
Basic Guide
Advanced Guide
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
Camera Basics
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
P Mode
Auto Mode / Hybrid Auto
Mode
Playback Mode
●● Image transfer will begin. The screen
darkens during image transfer.
Wi-Fi Functions
●● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
●● To end the connection, press the
] button, press the [ ][ ] buttons
[
on the confirmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
Setting Menu
Accessories
Appendix
Index
●● To add multiple smartphones, repeat the
above procedure starting from step 1.
●● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 5. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 5.
●● Once you have registered a smartphone, you can change privacy
settings for it on the camera (= 116).
95
●● Connections require that a memory card be in the camera.
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 27) > [ ] tab > [Wi-Fi Settings] > [Target History] > [Off].
●● You can also send multiple images at once and change the image
size before sending (= 109).
●● You can send the current image by choosing [Send this image] on
the screen in step 6.
Before Use
Using Another Access Point
Basic Guide
When connecting the camera to a smartphone with the [ ] button or
through the Wi-Fi menu, you can also use an existing access point.
1
Advanced Guide
Prepare for the connection.
Camera Basics
●● Access the [Waiting to connect] screen
by either following steps 1 – 3 in “Sending
to a Smartphone Assigned to the Button”
(= 93) or steps 1 – 4 in “Adding a
Smartphone Using the Wi-Fi Menu”
(= 94).
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
2 Connect the smartphone to the
access point.
Playback Mode
Wi-Fi Functions
3 Choose [Switch Network].
●● Press the [ ][ ] buttons to choose
[Switch Network], and then press the [
button.
●● A list of detected access points will be
displayed.
Setting Menu
Accessories
]
Appendix
Index
96
4 Connect to the access point and
choose the smartphone.
●● For WPS-compatible access points,
connect to the access point and choose
the smartphone as described in steps
5 – 8 in “Using WPS-Compatible Access
Points” (= 99).
●● For non-WPS access points, follow steps
2 – 4 in “Connecting to Listed Access
Points” (= 101) to connect to the
access point and choose the smartphone.
5 Configure the privacy settings and
send images.
●● Follow steps 5 – 6 in “Adding a
Smartphone Using the Wi-Fi Menu”
(= 94) to configure the privacy
settings and send images.
Previous Access Points
To reconnect to a previous access point automatically, follow step 3 in
“Sending to a Smartphone Assigned to the Button” (= 93) or step 4 in
“Adding a Smartphone Using the Wi-Fi Menu” (= 94).
●● To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
●● To reconnect to a previous access point, follow the procedure from
step 5 in “Using Another Access Point” (= 96).
●● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” (= 96) from step 4.
Saving Images to a Computer
Preparing to Register a Computer
Before Use
Basic Guide
Advanced Guide
Camera Basics
Checking Your Computer Environment
Auto Mode / Hybrid Auto
Mode
The camera can connect via Wi-Fi to computers running the following
operating systems. For detailed system requirements and compatibility
information, including support in new operating systems, visit the Canon
website.
Other Shooting Modes
P Mode
●● Windows 8/8.1
●● Windows 7 SP1
Playback Mode
●● Mac OS X 10.9
Wi-Fi Functions
●● Mac OS X 10.8.2 or later
Setting Menu
●● Windows 7 Starter and Home Basic editions are not supported.
●● Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Accessories
Appendix
Index
Installing the Software
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
1 Download the software.
●● With a computer connected to the
Internet, access http://www.canon.com/
icpd/.
●● Access the site for your country or region.
●● Download the software.
97
2 Install the files.
●● Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
●● Installation may take some time,
depending on computer performance and
the Internet connection.
●● Click [Finish] or [Restart] on the screen
after installation.
●● Internet access is required, and any ISP account charges and
access fees must be paid separately.
●● Follow the steps below to uninstall (delete) the software.
-- In Windows, click in the following order: [Start] menu > [All
Programs] > [Canon Utilities], and then choose the software you
want to uninstall.
-- In Mac OS, click on [Applications] folder, choose the [Canon
Utilities] folder, and then drag the folder of the software you
want to uninstall to the trash.
Configuring the Computer for a Wi-Fi Connection
(Windows Only)
2 Configure the setting.
●● Click in the following order: [Start] menu
> [All Programs] > [Canon Utilities] >
[CameraWindow] > [Wi-Fi connection
setup].
Before Use
Basic Guide
Advanced Guide
●● In the application that opens, follow the
on-screen instructions and configure the
setting.
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● The following Windows settings are configured when you run the
utility in step 2.
-- Turn on media streaming.
This will enable the camera to see (find) the computer to access
via Wi-Fi.
-- Turn on network discovery.
This will enable the computer to see (find) the camera.
-- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
-- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other
automatically.
●● Some security software may prevent you from completing the
settings as described here. Check the settings of your security
software.
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
On a computer running Windows, configure the following settings before
connecting the camera to the computer wirelessly.
1 Confirm that the computer is
connected to an access point.
●● For instructions on checking your network
connection, refer to the computer user
manual.
98
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards (“Wi-Fi” (= 156)).
Connection methods vary depending on whether the access point
supports Wi-Fi Protected Setup (WPS, = 99) or not (= 101). For
non-WPS access points, check the following information.
●● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called the
“access point name” or “network name”.
●● Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission. Check
which security setting is used: WPA2-PSK (AES), WPA2-PSK
(TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open system
authentication), or no security.
●● Password (encryption key / network key)
The key used when encrypting data during wireless transmission. Also
called the “encryption key” or “network key”.
●● Key index (transmit key)
The key set when WEP is used for network authentication / data
encryption. Use “1” as the setting.
●● If system administrator status is needed to adjust network
settings, contact the system administrator for details.
●● These settings are very important for network security. Exercise
adequate caution when changing these settings.
●● For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
●● A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
●● This guide refers to all Wi-Fi routers and base stations as “access
points”.
●● If you use MAC address filtering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You can
check your camera’s MAC address by choosing MENU (= 27)
> [ ] tab > [Wi-Fi Settings] > [Check MAC Address].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Using WPS-Compatible Access Points
Playback Mode
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN
Method for settings on a WPS supported device.
Wi-Fi Functions
1 Confirm that the computer is
Setting Menu
connected to an access point.
Accessories
●● For instructions on checking the
connection, refer to the device and
access point user manuals.
2 Access the Wi-Fi menu.
●● Press the [
on.
●● Press the [
Appendix
Index
] button to turn the camera
] button.
99
●● After [Device Nickname] is displayed,
press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
7 Establish the connection.
●● On the access point, hold down the WPS
connection button for a few seconds.
●● On the camera, press the [
go to the next step.
3 Choose [
].
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
4 Choose [Add a Device].
] button to
Before Use
Basic Guide
Advanced Guide
●● The camera connects to the access point
and lists devices connected to it on the
[Select a Device] screen.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
8 Choose the target device.
P Mode
●● Press the [ ][ ] buttons to choose the
target device name, and then press the
[ ] button.
Playback Mode
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Wi-Fi Functions
Setting Menu
9 Install a driver (first Windows
connection only).
5 Choose [WPS Connection].
●● Press the [ ][ ] buttons to choose
[WPS Connection], and then press the
[ ] button.
6 Choose [PBC Method].
●● Press the [ ][ ] buttons to choose [PBC
Method], and then press the [ ] button.
●● When this screen is displayed on the
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Accessories
Appendix
Index
●● Double-click the connected camera icon.
●● Driver installation will begin.
●● After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
100
10 Display CameraWindow.
●● Windows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].
●● Mac OS: CameraWindow is automatically
displayed when a Wi-Fi connection is
established between the camera and
computer.
11 Import images.
●● Click [Import Images from Camera], and
then click [Import Untransferred Images].
●● Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
●● Click [OK] in the screen that is displayed
after image import is complete.
●● When viewing imported images on a
computer, always use software that
supports the images shot on the camera
(software normally installed on the
computer or general-use software).
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 27) > [ ] tab > [Wi-Fi Settings] > [Target History] > [Off].
●● You can change the camera nickname displayed on the screen in
step 2 (= 100).
●● When the camera is connected to a computer, the camera screen
is blank.
●● Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
●● To disconnect from the camera, turn off the camera.
●● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Connecting to Listed Access Points
Accessories
Appendix
1 View the listed access points.
●● View the listed networks (access points)
as described in steps 1 – 4 of “Using
WPS-Compatible Access Points”
(= 99).
Index
2 Choose an access point.
●● Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.
101
3 Enter the access point password.
●● Press the [ ] button to access the
keyboard, and then enter the password
(= 28).
●● Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
4 Choose [Auto].
●● Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
●● To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
(= 99).
●● To determine the access point password, check on the access
point itself or refer to the user manual.
●● Up to 16 access points will be displayed. If no access points are
detected even after you choose [Refresh] in step 2 to update the
list, choose [Manual Settings] in step 2 to complete access point
settings manually. Follow on-screen instructions and enter an
SSID, security settings, and a password.
●● When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
password in step 3. To use the same password, press the [ ][ ]
buttons to choose [Next], and then press the [ ] button.
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Using WPS-Compatible Access Points” (= 99).
●● To connect to a device via an access point, confirm that the target
device is already connected to the access point, and then follow the
procedure from step 8 in “Using WPS-Compatible Access Points”
(= 99).
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow
the procedure in “Using WPS-Compatible Access Points” (= 99)
from step 5 or the procedure in “Connecting to Listed Access Points”
(= 101) from step 2.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
102
Sending Images to a Registered
Web Service
Registering Web Services
Use a smartphone or computer to add to the camera Web services that
you want to use.
●● A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY
and other Web services.
●● Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
●● For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.
com/cig/).
●● You must have an account with Web services other than CANON
iMAGE GATEWAY if you desire to use them. For further details, check
the websites for each Web service you want to register.
●● Separate ISP connection and access point fees may be applicable.
Registering CANON iMAGE GATEWAY
●● Once the login screen is displayed,
enter your user name and password
to log in. If you do not have a CANON
iMAGE GATEWAY account, follow
the instructions to complete member
registration (free of charge).
Before Use
Basic Guide
Advanced Guide
2 Choose the type of camera.
●● On this camera model, [
in the Wi-Fi menu.
Camera Basics
Auto Mode / Hybrid Auto
Mode
] is displayed
], a page is
●● Once you choose [
displayed for entering the authentication
code. On this page in step 7, you will
enter the authentication code displayed
on the camera after steps 3 – 6.
Other Shooting Modes
P Mode
Playback Mode
3 Access the Wi-Fi menu.
●● Press the [
on.
●● Press the [
Wi-Fi Functions
] button to turn the camera
Setting Menu
] button.
Accessories
●● After [Device Nickname] is displayed,
press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Appendix
Index
After linking the camera and CANON iMAGE GATEWAY, add CANON
iMAGE GATEWAY as a destination Web service on the camera.
1 Log in to CANON iMAGE GATEWAY
and access the camera link settings
page.
●● From a computer or smartphone, access
http://www.canon.com/cig/ to visit
CANON iMAGE GATEWAY.
103
4 Choose [
8 Check the confirmation number and
].
●● Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
●● On screen 2 of step 6, press the [ ][ ]
buttons to choose [OK], and then press
the [ ] button. The confirmation number
is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
5 Choose [Authenticate].
●● Press the [ ][ ] buttons to choose
[Authenticate], and then press the [
button.
complete the setup process.
]
Auto Mode / Hybrid Auto
Mode
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
●● Complete the setup process on the
smartphone or computer.
P Mode
6 Establish a connection with an
Playback Mode
access point.
●● Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (= 99) or in steps 2 – 4
in “Connecting to Listed Access Points”
(= 101).
●● Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
●● Keep this screen displayed until step 7 is
complete.
7 Enter the authentication code.
●● On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
●● A six-digit confirmation number is
displayed.
Wi-Fi Functions
●● [ ] (= 112) and CANON iMAGE
GATEWAY are now added as
destinations, and the [
] icon changes
to [
].
●● A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure
in “Registering Other Web Services”
(= 105) from step 2.
Setting Menu
Accessories
Appendix
Index
●● Connections require that a memory card with saved images be in
the camera.
●● You can change the camera nickname displayed on the screen in
step 3 (= 103).
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and then
configure the setting.
104
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
camera first (= 103).
1 Access the Web service settings
screen.
●● Follow step 1 in “Registering CANON
iMAGE GATEWAY” (= 103) to log in
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
2 Configure the Web service you want
to use.
●● Follow the instructions displayed on the
smartphone or computer to set up the
Web service.
3
Choose [
].
●● In Playback mode, press the [
to access the Wi-Fi menu.
] button
Uploading Images to Web Services
Basic Guide
1 Access the Wi-Fi menu.
●● Press the [
on.
●● Press the [
Advanced Guide
] button to turn the camera
Camera Basics
] button.
Auto Mode / Hybrid Auto
Mode
2 Choose the destination.
Other Shooting Modes
●● Press the [ ][ ][ ][ ] buttons to choose
the icon of the Web service to connect to,
and then press the [ ] button.
P Mode
●● If multiple recipients or sharing options
are used with a Web service, choose the
desired item on the [Select Recipient]
screen by pressing the [ ][ ] buttons,
and then press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
3 Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● The Web service settings are now
updated.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
●● If any configured settings change, follow these steps again to
update the camera settings.
Before Use
Accessories
Appendix
Index
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
●● When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the [ ] button.
105
●● Image transfer will begin. The screen
darkens during image transfer.
●● After the image is sent, [OK] is displayed.
Press the [ ] button to return to the
playback screen.
●● Connections require that a memory card with saved images be in
the camera.
●● You can also send multiple images at once, resize images, and
add comments before sending (= 109).
●● You can send the current image by choosing [Send this image] on
the screen in step 3.
●● We recommend using the dedicated application Canon Online
Photo Album when viewing images sent to CANON iMAGE
GATEWAY on a smartphone. Search for the Canon Online Photo
Album in the App Store for iPhone and iPad, or in Google Play for
Android smartphones, and download and install the app.
Printing Images Wirelessly from a
Connected Printer
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can
also use an existing access point (= 96).
Before Use
Basic Guide
Advanced Guide
Camera Basics
1 Access the Wi-Fi menu.
Auto Mode / Hybrid Auto
Mode
●● Access the Wi-Fi menu as described in
step 2 in “Adding a Smartphone Using
the Wi-Fi Menu” (= 94).
2 Choose [
Other Shooting Modes
P Mode
].
Playback Mode
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
Wi-Fi Functions
Setting Menu
3 Choose [Add a Device].
Accessories
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Appendix
Index
●● The camera’s SSID is displayed.
106
4 Connect the printer to the network.
●● In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
5 Choose the printer.
●● Press the [ ][ ] buttons to choose the
printer name, and then press the [ ]
button.
●● Connections require that a memory card with saved images be in
the camera.
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 27) > [ ] tab > [Wi-Fi Settings] > [Target History] > [Off].
●● To use another access point, follow steps 3 – 4 in “Using Another
Access Point” (= 96).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
6 Choose an image to print.
Playback Mode
●● Press the [ ][ ] buttons to choose an
image.
●● Press the [ ] button, choose [
press the [ ] button again.
Wi-Fi Functions
], and
Setting Menu
●● Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
Accessories
●● For detailed printing instructions, see
“Printing Images” (= 133).
●● To end the connection, press the [ ]
button, press the [ ][ ] buttons on the
confirmation screen to choose [OK], and
then press the [ ] button.
Appendix
Index
107
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as
follows.
●● Only Canon-brand cameras equipped with a Wi-Fi function can be
connected to wirelessly. You cannot connect to a Canon-brand camera
that does not have a Wi-Fi function, even if it supports Eye-Fi cards.
1 Access the Wi-Fi menu.
●● Access the Wi-Fi menu as described in
step 2 in “Adding a Smartphone Using
the Wi-Fi Menu” (= 94).
2
Choose [
].
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
3 Choose [Add a Device].
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
●● Follow steps 1 – 3 on the target camera
too.
4 Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
Camera Basics
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
P Mode
Auto Mode / Hybrid Auto
Mode
Playback Mode
●● Image transfer will begin. The screen
darkens during image transfer.
Wi-Fi Functions
●● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
Setting Menu
●● To end the connection, press the
] button, press the [ ][ ] buttons
[
on the confirmation screen to choose
[OK], and then press the [ ] button.
Accessories
Appendix
Index
●● Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
108
●● Connections require that a memory card be in the camera.
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 27) > [ ] tab > [Wi-Fi Settings] > [Target History] > [Off].
●● You can also send multiple images at once and change the image
size before sending (= 109).
●● You can send the current image by choosing [Send this image] on
the screen in step 4.
Image Sending Options
You can choose multiple images to send at once and change the image
recording pixel setting (size) before sending. Some Web services also
enable you to annotate the images you send.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Sending Multiple Images
Auto Mode / Hybrid Auto
Mode
You can also select a range of images to send, or send all images tagged
as favorites together, from the image sending screen.
Other Shooting Modes
1 Choose [Select and send].
P Mode
●● On the image transfer screen, press the
[ ][ ] buttons to choose [Select and
send], and then press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
2 Choose a selection method.
Accessories
●● Press the [ ][ ] buttons to choose a
selection method.
Appendix
Index
Select a range
1 Choose [Select Range].
●● Following step 2 in “Sending Multiple
Images” (= 109), choose [Select
Range] and press the [ ] button.
109
2 Choose images.
●● Follow steps 2 – 3 in “Selecting a Range”
(= 78) to specify images.
●● When also sending movies, choose [Incl.
Movies] by pressing the [ ][ ][ ][ ]
buttons, and then press the [ ] button.
[ ] is displayed.
●● Press the [ ][ ][ ][ ] buttons to choose
[OK], and then press the [ ] button.
3 Send the images.
●● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
Sending Images Tagged as Favorites
You can send all images tagged as favorites (= 83) together.
1 Choose [Favorites].
●● You cannot choose [Favorites] in step 1 if no images are tagged
as favorites.
Before Use
Basic Guide
Advanced Guide
Notes on Sending Images
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Keep your fingers or other objects off the Wi-Fi antenna area
(= 4). Covering this may decrease the speed of your image
transfers.
Other Shooting Modes
●● Depending on the condition of the network you are using, it may take
a long time to send movies. Be sure to keep an eye on the camera
battery level.
P Mode
●● Web services may limit the number of images or length of movies you
can send.
Playback Mode
●● When sending movies to smartphones, note that the supported image
quality varies depending on the smartphone. For details, refer to the
smartphone user manual.
Wi-Fi Functions
●● Following step 2 in “Sending Multiple
Images” (= 109), choose [Favorites]
and press the [ ] button.
●● On the screen, wireless signal strength is indicated by the following
icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
●● An image selection screen showing only
images tagged as favorites is displayed.
You can also not send the images if you
press the [ ] button to remove [ ] after
selecting images.
●● Sending images to Web services will take less time when resending
images you have already sent that are still on the CANON iMAGE
GATEWAY server.
Setting Menu
Accessories
Appendix
Index
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
2 Send the images.
●● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
110
Choosing the Number of Recording Pixels (Image
Size)
On the image transfer screen, choose [ ] by pressing the [ ][ ]
buttons, and then press the [ ] button. On the screen displayed, choose
the recording pixel setting (image size) by pressing the [ ][ ] buttons,
and then press the [ ] button.
●● To send images at original size, select [No] as the resizing option.
●● Choosing [ ] will resize images that are larger than the selected size
before sending.
●● Movies cannot be resized.
●● Image size can also be configured in MENU (= 27) > [
> [Wi-Fi Settings] > [Resize for Sending].
] tab
Before Use
Adding Comments
Using the camera, you can add comments to images that you send
to e-mail addresses, social networking services, etc. The number of
characters and symbols that can be entered may differ depending on the
Web service.
Basic Guide
Advanced Guide
Camera Basics
1 Access the screen for adding
Auto Mode / Hybrid Auto
Mode
comments.
●● On the image transfer screen, choose
[ ] by pressing the [ ][ ][ ][ ] buttons,
and then press the [ ] button.
Other Shooting Modes
P Mode
2 Add a comment (= 28).
3 Send the image.
Playback Mode
Wi-Fi Functions
●● When a comment is not entered, the comment set in CANON
iMAGE GATEWAY is automatically sent.
●● You can also annotate multiple images before sending them. The
same comment is added to all images sent together.
Setting Menu
Accessories
Appendix
Index
111
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can
be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
2 Choose the type of images to send
(only when sending movies with
images).
Before Use
Basic Guide
●● Press the [
] button and choose
[Wi-Fi Settings] on the [ ] tab (= 27).
Advanced Guide
●● Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][ ]
buttons to choose [Stills/Movies].
Camera Basics
Auto Mode / Hybrid Auto
Mode
3 Assign [
Initial Preparations
] to the [ ] button (only
when sending images by pressing
the [ ] button).
Preparing the Camera
Register [ ] as the destination. You can also assign [ ] to the [ ] button,
so that you can simply press the [ ] button to send any unsent images on
the memory card to a computer via CANON iMAGE GATEWAY.
1 Add [
] as a destination.
●● Add [ ] as a destination, as described in
“Registering CANON iMAGE GATEWAY”
(= 103).
●● If you are also uploading images to a
Web service, log in to the CANON iMAGE
GATEWAY (= 103), choose your
camera model, and then display the Web
service configuration screen and choose
the Web service you want to upload
images to from the Image Sync settings.
See the CANON iMAGE GATEWAY Help
for more details.
Other Shooting Modes
P Mode
●● Clear the [ ] button setting if a
smartphone is already assigned to the
button (= 93).
Playback Mode
●● Access the mobile connection screen
as described in step 2 in “Sending to
a Smartphone Assigned to the Button”
(= 93), press the [ ][ ] buttons to
choose [ ], and then press the [ ]
button.
Wi-Fi Functions
Setting Menu
Accessories
Preparing the Computer
Appendix
Install and configure the software on the destination computer.
Index
1 Install the software.
●● Install the software on a computer
connected to the Internet (= 97).
2 Register the camera.
●● Windows: In the taskbar, right-click [
and then click [Add new camera].
●● Mac OS: In the menu bar, click [
then click [Add new camera].
],
], and
112
●● A list of cameras linked to CANON
iMAGE GATEWAY is displayed. Choose
the camera from which images are to be
sent.
●● Once the camera is registered and the
computer is ready to receive images, the
icon changes to [ ].
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
1
Send images.
●● If you have already assigned [ ] to the
[ ] button, press the [ ] button.
●● If you have not assigned the button this
way, choose [ ] as described in steps
1 – 2 in “Uploading Images to Web
Services” (= 105).
●● Images labeled with a [ ] icon have been
sent.
2 Save the images to the computer.
●● Images are automatically saved to the
computer when you turn it on.
●● Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
●● When sending images, you should use a fully charged battery
pack or an AC adapter kit (sold separately, = 126).
●● Even if images were imported to the computer through a different
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
●● Sending is faster when the destination is a computer on the same
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY, so
the computer must be connected to the Internet.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Viewing Images Sent via Image Sync on Your
Smartphone
Playback Mode
Wi-Fi Functions
Installing the Canon Online Photo Album (Canon OPA) on your
smartphone allows you to view and download images sent by Image
Sync and temporarily saved on CANON iMAGE GATEWAY on your
smartphone.
The following setup is required.
Setting Menu
Accessories
●● You must have completed configuration for “Preparing the Computer”
(= 112).
●● Search for the Canon Online Photo Album in the App Store for iPhone
and iPad, or in Google Play for Android smartphones, and download
and install the app.
Appendix
Index
●● Log in to the CANON iMAGE GATEWAY (= 103), choose your
camera model, and then display the Web service configuration screen
and change the Image Sync settings so that you can browse or
download from your smartphone. See the CANON iMAGE GATEWAY
Help for more details.
113
●● Images deleted from CANON iMAGE GATEWAY can no longer
be viewed after a certain time.
●● You cannot view images sent before you changed the Image
Sync settings so that you can browse or download from your
smartphone.
●● For details on using the Canon Online Photo Album, refer to the
Canon Online Photo Album Help.
Using a Smartphone to View Camera
Images and Control the Camera
You can do the following with the dedicated smartphone app Camera
Connect.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Browse images on the camera and save them to the smartphone
Auto Mode / Hybrid Auto
Mode
●● Geotag images on the camera (= 114)
●● Shoot remotely (= 115)
Other Shooting Modes
●● Privacy settings must be configured in advance to allow image
viewing on the smartphone (= 93, = 94, = 116).
P Mode
Playback Mode
Geotagging Images on the Camera
Wi-Fi Functions
Setting Menu
GPS data recorded on a smartphone using the dedicated Camera
Connect application can be added to images on the camera. Images are
tagged with information including the latitude, longitude, and elevation.
●● Before shooting, make sure the date and time and your home
time zone are set correctly, as described in “Setting the Date and
Time” (= 19). Also follow the steps in “World Clock” (= 119)
to specify any shooting destinations in other time zones.
●● Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
Accessories
Appendix
Index
114
Shooting Remotely
As you check a shooting screen on your smartphone, you can use it to
shoot remotely.
1
●● The camera works in [ ] mode during remote shooting. However,
some FUNC. and MENU settings you have configured in advance
may be changed automatically.
●● Movie shooting is not available.
Before Use
Basic Guide
Advanced Guide
Secure the camera.
●● Once remote shooting begins, the
camera lens will come out. Lens motion
from zooming may also move the camera
out of position. Keep the camera still by
mounting it on a tripod or taking other
measures.
Camera Basics
●● Any jerky subject motion shown on the smartphone due to the
connection environment will not affect recorded images.
●● No AF frames are displayed. Capture a test image to check the
focus.
●● Captured images are not transferred to the smartphone. Use the
smartphone to browse and import images from the camera.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
2 Connect the camera and
smartphone (= 93, = 94).
Playback Mode
●● In the privacy settings, choose [Yes].
Wi-Fi Functions
3 Choose remote shooting.
Setting Menu
●● In Camera Connect on the smartphone,
choose remote shooting.
Accessories
●● The camera lens will come out. Do not
press near the lens, and make sure no
objects will obstruct it.
●● Once the camera is ready for remote
shooting, a live image from the camera
will be displayed on the smartphone.
Appendix
Index
●● At this time, a message is displayed on
the camera, and all operations except
pressing the power button are disabled.
4 Shoot.
●● Use the smartphone to shoot.
115
Editing or Erasing Wi-Fi Settings
Web
Services
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1 Access the Wi-Fi menu and choose
a device to edit.
●● Press the [
on.
●● Press the [
Before Use
Connection
Configurable Items
] button to turn the camera
] button.
●● Press the [ ][ ] buttons to access
the device selection screen, press the
[ ][ ][ ][ ] buttons to choose the icon
of a device to edit, and then press the
[ ] button.
2 Choose [Edit a Device].
●● Press the [ ][ ] buttons to choose [Edit
a Device], and then press the [ ] button.
[Change Device Nickname]
(= 116)
O
O
O
O
–
[View Settings] (= 93)
–
O
–
–
–
[Erase Connection Info] (= 116)
O
O
O
O
–
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
O : Configurable – : Not configurable
Other Shooting Modes
Changing a Device Nickname
P Mode
You can change the device nickname (display name) that is displayed on
the camera.
●● Following step 4 in “Editing Connection
Information” (= 116), choose [Change
Device Nickname] and press the [ ]
button.
Playback Mode
●● Select the input field and press the [ ]
button. Use the keyboard displayed to
enter a new nickname (= 28).
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
3 Choose the device to edit.
●● Press the [ ][ ] buttons to choose the
device to edit, and then press the [ ]
button.
4 Choose the item to edit.
●● Press the [ ][ ] buttons to choose
the item to edit, and then press the [
button.
]
●● The items you can change depend on the
device or service.
Index
●● Following step 4 in “Editing Connection
Information” (= 116), choose [Erase
Connection Info] and press the [ ]
button.
●● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [OK], and then
press the [ ] button.
●● The connection information will be
erased.
116
Changing the Camera Nickname
You can change the camera nickname displayed on the connected device.
1 Choose [Wi-Fi Settings].
●● Press the [
] button and choose
[Wi-Fi Settings] on the [ ] tab (= 27).
Before Use
Returning the Wi-Fi Settings to Default
Basic Guide
Return the Wi-Fi settings to default if you transfer ownership of the
camera to another person, or dispose of it.
Resetting the Wi-Fi settings will also clear all Web service settings. Be
sure that you want to reset all Wi-Fi settings before using this option.
Advanced Guide
Camera Basics
1 Choose [Wi-Fi Settings].
Auto Mode / Hybrid Auto
Mode
●● Press the [
] button and choose
[Wi-Fi Settings] on the [ ] tab (= 27).
Other Shooting Modes
2 Choose [Change Device Nickname].
●● Press the [ ][ ] buttons to choose
[Change Device Nickname], and then
press the [ ] button.
3 Change the device nickname.
●● Press the [ ] button. Use the keyboard
displayed to enter a new nickname
(= 28).
P Mode
2 Choose [Reset Settings].
●● Press the [ ][ ] buttons to choose
[Reset Settings], and then press the [
button.
Playback Mode
Wi-Fi Functions
]
Setting Menu
Accessories
3 Restore the default settings.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Appendix
Index
●● The Wi-Fi settings are now reset.
●● A message is displayed if the nickname you enter begins with
a symbol or space. Press the [ ] button and enter a different
nickname.
●● You can change the nickname when using the Wi-Fi function for
the first time by selecting the input field on the displayed [Device
Nickname] screen, pressing the [ ] button, and using the
keyboard displayed.
●● To reset other settings (aside from Wi-Fi) to defaults, choose
[Reset All] on the [ ] tab (= 124).
117
Before Use
Adjusting Basic Camera Functions
Basic Guide
Basic camera functions are configured on the [ ] tab of the MENU
(= 27). Customize commonly used functions as desired, for greater
convenience.
Setting Menu
Customize or adjust basic camera functions for greater convenience
Advanced Guide
Camera Basics
Silencing Camera Operations
Auto Mode / Hybrid Auto
Mode
Silence camera sounds and movies as follows.
Other Shooting Modes
●● Choose [Mute], and then choose [On].
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
●● Operation can also be silenced by holding down the [ ] button
as you turn the camera on.
●● Sound is not played during movies (= 69) if you mute camera
sounds. To restore sound during movies, press the [ ] button.
Adjust volume with the [ ][ ] buttons, as needed.
Accessories
Appendix
Index
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
●● Choose [Volume], and then press the [
button.
]
●● Choose an item, and then press the
[ ][ ] buttons to adjust the volume.
118
Before Use
Hiding Hints and Tips
World Clock
Hints and tips are normally shown when you choose FUNC. (= 26) or
MENU (= 27) items. If you prefer, you can deactivate this information.
To ensure that your shots will have the correct local date and time when
you travel abroad, simply register the destination in advance and switch to
that time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (= 19).
●● Choose [Hints & Tips], and then choose
[Off].
1
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Specify your destination.
Other Shooting Modes
●● Choose [Time Zone], and then press the
[ ] button.
Date and Time
●● Press the [ ][ ] buttons to choose
[ World], and then press the [ ] button.
Adjust the date and time as follows.
●● Press the [ ][ ] buttons to choose the
destination.
●● Choose [Date/Time], and then press the
[ ] button.
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ][ ] buttons
to adjust the setting.
P Mode
Playback Mode
Wi-Fi Functions
●● To set daylight saving time (1 hour
ahead), choose [ ] by pressing the
[ ][ ] buttons, and then choose [ ] by
pressing the [ ][ ] buttons.
●● Press the [
Setting Menu
Accessories
] button.
2 Switch to the destination time zone.
●● Press the [ ][ ] buttons to choose
[ World], and then press the [
button.
]
Appendix
Index
●● [ ] is now shown on the shooting screen
(= 146).
●● Adjusting the date or time while in [ ] mode (= 19) will
automatically update your [ Home] time and date.
119
Lens Retraction Timing
Power-Saving Adjustment
The lens is normally retracted for safety about one minute after you press
the [
] button in Shooting mode (= 24). To have the lens retracted
immediately after you press the [
] button, set the retraction timing to
[0 sec.].
Adjust the timing of automatic camera and screen deactivation (Auto
Power Down and Display Off, respectively) as needed (= 25).
●● Choose [Lens Retraction], and then
choose [0 sec.].
●● Choose [Power Saving], and then press
the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● After choosing an item, press the [ ][ ]
buttons to adjust it as needed.
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
●● To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1 Configure the setting.
Playback Mode
Wi-Fi Functions
●● The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
●● These power-saving functions are not available when you have
set Eco mode (= 120) to [On].
Setting Menu
Accessories
●● Choose [Eco Mode], and then choose [On].
●● [
] is now shown on the shooting
screen (= 146).
Appendix
Index
●● The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2 Shoot.
●● To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
120
Screen Brightness
Formatting Memory Cards
Adjust screen brightness as follows.
Before using a new memory card or a card formatted in another device,
you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back
them up.
●● Choose [LCD Brightness], and then
press the [ ][ ] buttons to adjust the
brightness.
Before Use
Basic Guide
Advanced Guide
Camera Basics
1 Access the [Format] screen.
●● Choose [Format], and then press the [
button.
●● For maximum brightness, press and hold the [ ] button for at
least one second when the shooting screen is displayed or when
in single-image display. (This will override the [LCD Brightness]
setting on the [ ] tab.) To restore the original brightness, press
and hold the [ ] button again for at least one second or restart
the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
●● Choose [Start-up Image], and then
choose [Off].
Auto Mode / Hybrid Auto
Mode
]
Other Shooting Modes
2 Choose [OK].
P Mode
●● Press the [ ][ ] buttons to choose
[Cancel], press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
Playback Mode
Wi-Fi Functions
Setting Menu
3 Format the memory card.
●● To begin the formatting process, press
the [ ][ ] buttons to choose [OK], and
then press the [ ] button.
●● When formatting is finished, [Memory
card formatting complete] is displayed.
Press the [ ] button.
Accessories
Appendix
Index
●● Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards,
take steps to protect personal information if necessary, as by
physically destroying cards.
●● The total card capacity indicated on the formatting screen may be
less than the advertised capacity.
121
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing
is slower, continuous shooting is slower, or movie recording suddenly
stops. Low-level formatting erases all data on a memory card. Before lowlevel formatting, copy images on the memory card to a computer, or take
other steps to back them up.
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
●● Low-level formatting takes longer than “Formatting Memory
Cards” (= 121), because data is erased from all storage regions
of the memory card.
●● You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
Basic Guide
Advanced Guide
●● Choose [File Numbering], and then
choose an option.
●● On the screen in step 2 of “Formatting
Memory Cards” (= 121), press the
[ ][ ] buttons to choose [Low Level
Format], and then press the [ ][ ]
buttons to select this option. A [ ] icon is
displayed.
●● Follow steps 2 – 3 in “Formatting Memory
Cards” (= 121) to continue with the
formatting process.
Before Use
File Numbering
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Continuous
Auto Reset
Images are numbered consecutively (until the
9999th shot is taken/saved) even if you switch
memory cards.
Image numbering is reset to 0001 if you switch
memory cards, or when a new folder is created.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images
on newly inserted memory cards. To start saving shots from 0001,
use an empty (or formatted, = 121) memory card.
Accessories
Appendix
Index
122
Before Use
Date-Based Image Storage
Checking Certification Logos
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
Some logos for certification requirements met by the camera can be
viewed on the screen. Other certification logos are printed in this guide, on
the camera packaging, or on the camera body.
●● Choose [Create Folder], and then choose
[Daily].
Basic Guide
Advanced Guide
●● Choose [Certification Logo Display], and
then press the [ ] button.
●● Images will now be saved in folders
created on the shooting date.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(= 114), zoom bar (= 30) and elsewhere from m/cm to ft/in as
needed.
●● Choose [Units], and then choose [ft/in].
P Mode
Display Language
Playback Mode
Wi-Fi Functions
Change the display language as needed.
●● Choose [Language
the [ ] button.
], and then press
Setting Menu
●● Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
Accessories
Appendix
Index
●● You can also access the [Language] screen in Playback mode by
pressing and holding the [ ] button and immediately pressing
] button.
the [
123
Before Use
Adjusting Other Settings
The following settings can also be adjusted on the [
] tab.
●● [Video System] (= 128)
Basic Guide
Advanced Guide
●● [Wi-Fi Settings] (= 89)
Camera Basics
●● [Mobile Device Connect Button] (= 93)
Auto Mode / Hybrid Auto
Mode
Restoring Default Camera Settings
Other Shooting Modes
If you accidentally change a setting, you can restore default camera
settings.
1
P Mode
Access the [Reset All] screen.
Playback Mode
●● Choose [Reset All], and then press the
[ ] button.
Wi-Fi Functions
2 Restore default settings.
Setting Menu
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Accessories
●● Default settings are now restored.
Appendix
●● The following functions are not restored to default settings.
-- [ ] tab settings [Date/Time] (= 119), [Time Zone] (= 119),
] (= 123), and [Video System] (= 128)
[Language
-- Custom white balance data you have recorded (= 60)
-- Shooting Mode
-- Wi-Fi settings (= 89)
Index
124
Before Use
System Map
Basic Guide
Included Accessories
Advanced Guide
Accessories
Wrist strap
Enjoy the camera in more ways with optional Canon accessories and
other compatible accessories sold separately
Camera Basics
Battery Charger
CB-2LY/CB-2LYE*1
Battery Pack
NB-6LH*1
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
USB Cable (camera end: Mini-B)*2
P Mode
Memory Cards
Card Reader
Playback Mode
Computer
Wi-Fi Functions
HDMI Cable
(camera end: D-type)*3
Power
Setting Menu
Cables
Accessories
AV Cable AVC-DC400
AC Adapter Kit
ACK-DC40
Flash Units
TV/Video
System
PictBridge
Compatible Printers
Appendix
Index
High-Power
Flash
HF-DC2
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3 Use a commercially available cable no longer than 2.5 m (8.2 ft.).
125
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used
with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents
such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please
note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
Optional Accessories
The following camera accessories are sold separately. Note that
availability varies by area, and some accessories may no longer be
available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Power Supplies
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Battery Pack NB-6LH
●● Rechargeable lithium-ion battery
P Mode
Battery Charger CB-2LY/CB-2LYE
Playback Mode
●● Charger for Battery Pack NB-6LH
Wi-Fi Functions
●● The battery pack includes a convenient cover which you can
attach to know the charge status at a glance. Attach the cover so
is visible on a charged battery pack, and attach it so that
that
is not visible on an uncharged battery pack.
●● Battery Pack NB-6L is also supported.
Setting Menu
Accessories
Appendix
AC Adapter Kit ACK-DC40
Index
●● For powering the camera using
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or computer. Cannot be used to
charge the battery pack in the camera.
126
●● The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
●● For power outlets in a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery pack.
Before Use
Printers
Basic Guide
Canon-brand PictBridge-compatible
printers
Advanced Guide
Camera Basics
●● Even without using a computer, you can
print images by connecting the camera
directly to a printer.
For details, visit your nearest Canon
retailer.
Flash Units
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
High-Power Flash HF-DC2
P Mode
●● External flash for illuminating subjects
that are out of range of the built-in flash.
Playback Mode
Wi-Fi Functions
Other Accessories
Setting Menu
Accessories
Interface Cable IFC-400PCU
●● For connecting the camera to a computer
or printer.
Appendix
Index
AV Cable AVC-DC400
●● Connect the camera to a TV to enjoy
playback on the larger TV screen.
127
Using Optional Accessories
 Still Images  Movies
●● On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Playback on a TV
 Still Images  Movies
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
●● Some information may not be displayed when viewing images on
a TV (= 147).
Playback on a High-Definition TV
 Still Images  Movies
You can view your shots on a TV by connecting the camera to an HDTV
with a commercially available HDMI cable (not exceeding 2.5 m, with a
Type D terminal on the camera end). Movies shot at an image quality of
[ ] or [ ] can be viewed in high definition.
1 Make sure the camera and TV are
off.
Auto Mode / Hybrid Auto
Mode
3 Turn the TV on and switch to
Other Shooting Modes
external input.
●● Switch the TV input to the external input
you connected the cable to in step 2.
P Mode
4 Turn the camera on.
●● Press the [
on.
Playback Mode
] button to turn the camera
Wi-Fi Functions
●● Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
Setting Menu
Accessories
●● When finished, turn off the camera and
TV before disconnecting the cable.
●● Camera operating sounds are not played while the camera is
connected to an HDTV.
Appendix
Index
2 Connect the camera to the TV.
●● On the TV, insert the cable plug fully into
the HDMI input as shown.
128
Playback on a Standard-Definition TV
 Still Images  Movies
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
1 Make sure the camera and TV are
off.
●● When the camera and TV are connected, you can also shoot
while previewing shots on the larger screen of the TV. To shoot,
follow the same steps as when using the camera screen.
However, AF-Point Zoom (= 43) is not available.
 Still Images ●● Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
] button and choose
video output format, press the [
[Video System] on the [ ] tab.
Camera Basics
Auto Mode / Hybrid Auto
Mode
 Movies
Other Shooting Modes
P Mode
1 Make sure the camera is off.
2 Insert the coupler.
Playback Mode
●● Follow step 1 in “Inserting the Battery
Pack and Memory Card” (= 18) to
open the cover.
(1)
●● Follow steps 3 – 4 in “Playback on a
High-Definition TV” (= 128) to display
images.
Advanced Guide
Powering the camera with AC Adapter Kit ACK-DC40 (sold separately)
eliminates the need to monitor the remaining battery level.
●● On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
3 Display images.
Basic Guide
Powering the Camera with Household Power
2 Connect the camera to the TV.
●● On the TV, insert the cable plugs fully into
the video inputs as shown.
Before Use
Wi-Fi Functions
Setting Menu
●● Holding the coupler with the terminals (1)
facing as shown, insert the coupler just
as you would a battery pack (following
step 2 in “Inserting the Battery Pack and
Memory Card” (= 18)).
●● Follow step 4 in “Inserting the Battery
Pack and Memory Card” (= 18) to
close the cover.
Accessories
Appendix
Index
3 Connect the adapter to the coupler.
●● Open the cover and insert the adapter
plug fully into the coupler.
129
4 Connect the power cord.
●● Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
●● Turn the camera on and use it as desired.
●● When finished, turn the camera off and
unplug the power cord from the outlet.
●● Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
●● Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.
Using the Software
After downloading the software from the Canon website and installing it on
the computer you are using, you can do the following things.
Before Use
Basic Guide
Advanced Guide
●● CameraWindow
-- Save images to a computer
Camera Basics
●● Image Transfer Utility
-- Configure and receive images with Image Sync (= 112)
Auto Mode / Hybrid Auto
Mode
●● Map Utility
-- Display GPS information recorded in images on a map
Other Shooting Modes
P Mode
●● When viewing or editing images on a computer, always use
software that supports the images shot on the camera (software
normally installed on the computer or general-use software).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
130
Computer Connections via a Cable
●● Internet access is required, and any ISP account charges and
access fees must be paid separately.
Checking Your Computer Environment
The software can be used on the following computers. For detailed
system requirements and compatibility information, including support in
new operating systems, visit the Canon website.
●● Windows 8/8.1
●● Windows 7 SP1
●● Mac OS X 10.9
●● Follow the steps below to uninstall (delete) the software.
-- In Windows, click in the following order: [Start] menu > [All
Programs] > [Canon Utilities], and then choose the software you
want to uninstall.
-- In Mac OS, click on [Applications] folder , choose the [Canon
Utilities] folder, drag the folder of the software you want to
uninstall to the trash, and then empty the trash.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
●● Mac OS X 10.8
When sending images to a computer via Wi-Fi, check the system
requirements in “Checking Your Computer Environment” (= 97).
P Mode
Playback Mode
Installing the Software
Wi-Fi Functions
Setting Menu
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
1
Download the software.
Accessories
●● With a computer connected to the
Internet, access http://www.canon.com/
icpd/.
●● Access the site for your country or region.
Appendix
Index
●● Download the software.
2 Install the files.
●● Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process. Installation may
take some time, depending on computer
performance and the Internet connection.
●● Click [Finish] or [Restart] on the screen
after installation.
131
●● Choose [Downloads Images From Canon
Camera] and then click [OK].
Saving Images to a Computer
Basic Guide
Connecting the camera to a computer with a commercial USB cable (the
camera terminal is Mini-B) enables you to import your shots.
1
(2)
(1)
Before Use
Advanced Guide
Connect the camera to the
computer.
●● With the camera turned off, open the
cover (1). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal (2).
●● Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
2 Turn the camera on to access
CameraWindow.
●● Press the [
on.
] button to turn the camera
●● Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
Camera Basics
●● Double-click [
Auto Mode / Hybrid Auto
Mode
].
Other Shooting Modes
3 Save the images to the computer.
P Mode
●● Click [Import Images from Camera], and
then click [Import Untransferred Images].
Playback Mode
●● Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
Wi-Fi Functions
Setting Menu
●● After images are saved, close
] button to
CameraWindow, press the [
turn the camera off, and unplug the cable.
●● When viewing imported images on a
computer, always use software that
supports the images shot on the camera
(software normally installed on the
computer or general-use software).
Accessories
Appendix
Index
●● Windows: Follow the steps introduced
below.
●● In the screen that is displayed, click the
].
change program link of [
132
●● Windows 7: If the screen in step 2 is not displayed, click the [ ]
icon in the taskbar.
●● Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
●● Although you can save images to a computer simply by
connecting your camera to the computer without using the
software, the following limitations apply.
-- It may take a few minutes after you connect the camera to the
computer until camera images are accessible.
-- Images shot in vertical orientation may be saved in horizontal
orientation.
-- Image protection settings may be cleared from images saved
to a computer.
-- Some problems may occur when saving images or image
information, depending on the operating system version, the
software in use, or image file sizes.
Before Use
Printing Images
 Still Images  Movies
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare
orders for photo development services, and prepare orders or print
images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
Easy Print
P Mode
 Still Images  Movies
Playback Mode
Connecting the camera to a PictBridge-compatible printer with a
commercial USB cable (the camera terminal is Mini-B) enables you to
print your shots.
Wi-Fi Functions
Setting Menu
1 Make sure the camera and printer
are off.
Accessories
2 Connect the camera to the printer.
●● Open the terminal cover. Holding the
smaller cable plug in the orientation
shown, insert the plug fully into the
camera terminal.
Appendix
Index
●● Connect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
133
3 Turn the printer on.
4 Turn the camera on.
●● Press the [
on.
 Still Images ] button to turn the camera
 Movies
1 Access the printing screen.
Basic Guide
Advanced Guide
●● Follow steps 1 – 6 in “Easy Print”
(= 133) to access this screen.
5 Choose an image.
Camera Basics
Auto Mode / Hybrid Auto
Mode
2 Configure the setting.
●● Press the [ ][ ] buttons to choose an
image.
●● Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons to
choose an option.
6 Access the printing screen.
●● Press the [ ] button, choose [
press the [ ] button again.
Before Use
Configuring Print Settings
Other Shooting Modes
P Mode
], and
Default
Date
File No.
Both
7 Print the image.
Off
Default
Off
●● Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
●● Printing now begins.
●● To print other images, repeat the above
procedures starting from step 5 after
printing is finished.
On
RedEye 1
No. of
Copies
●● When you are finished printing, turn the
camera and printer off and disconnect
the cable.
●● For Canon-brand PictBridge-compatible printers (sold separately),
see “Printers” (= 127).
Cropping
–
Paper
Settings
–
Matches current printer settings.
Prints images with the date added.
Prints images with the file number added.
Prints images with both the date and file
number added.
–
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Matches current printer settings.
–
Uses information from the time of shooting to
print under optimal settings.
Corrects red-eye.
Appendix
Index
Choose the number of copies to print.
Specify a desired image area to print
(= 135).
Specify the paper size, layout, and other
details (= 135).
134
Cropping Images before Printing
Choosing Paper Size and Layout before Printing
 Still Images  Movies
By cropping images before printing, you can print a desired image area
instead of the entire image.
1 Choose [Cropping].
●● After following step 1 in “Configuring Print
Settings” (= 134) to access the printing
screen, choose [Cropping] and press the
[ ] button.
●● A cropping frame is now displayed,
indicating the image area to print.
2 Adjust the cropping frame as
 Still Images  Movies
1 Choose [Paper Settings].
●● After following step 1 in “Configuring Print
Settings” (= 134) to access the printing
screen, choose [Paper Settings] and
press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
2 Choose a paper size.
Other Shooting Modes
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
P Mode
needed.
Playback Mode
●● To resize the frame, move the zoom
lever.
●● To rotate the frame, press the [
Wi-Fi Functions
3 Choose a type of paper.
●● To move the frame, press the
[ ][ ][ ][ ] buttons.
] button.
] button, press the
●● Press the [
[ ][ ] buttons to choose [OK], and then
press the [ ] button.
3 Print the image.
●● Follow step 7 in “Easy Print” (= 133)
to print.
●● Cropping may not be possible at small image sizes, or at some
aspect ratios.
●● Dates may not be printed correctly if you crop images shot with
] selected.
[Date Stamp
Setting Menu
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
Accessories
Appendix
4 Choose a layout.
●● Press the [
option.
][
Index
] buttons to choose an
●● When choosing [N-up], press the [ ][ ]
buttons to specify the number of images
per sheet.
●● Press the [
] button.
5 Print the image.
135
Available Layout Options
Default
Bordered
Borderless
N-up
ID Photo
Fixed Size
Before Use
Printing Movie Scenes
Matches current printer settings.
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
Only available for images with a recording pixel setting of
L and an aspect ratio of 4:3.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
 Still Images ●● Follow steps 1 – 6 in “Easy Print”
(= 133) to choose a movie. This screen
is displayed.
●● Press the [ ][ ] buttons to choose [
and then press the [ ][ ] buttons to
choose the printing method.
1 Choose [ID Photo].
2 Choose the long and short side
length.
●● Press the [ ][ ] buttons to choose an
item. Choose the length by pressing the
[ ][ ] buttons, and then press the [ ]
button.
3 Choose the printing area.
●● Follow step 2 in “Cropping Images before
Printing” (= 135) to choose the printing
area.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
2 Choose a printing method.
 Movies
●● Following steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
(= 135), choose [ID Photo] and press
the [ ] button.
Basic Guide
Advanced Guide
1 Access the printing screen.
Printing ID Photos
 Still Images  Movies
P Mode
],
Playback Mode
3 Print the image.
Wi-Fi Functions
Movie Printing Options
Single
Sequence
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a
single sheet of paper. You can also print the folder number,
file number, and elapsed time for the frame by setting
[Caption] to [On].
Setting Menu
Accessories
Appendix
Index
●● To cancel printing in progress, press the [ ] button, choose [OK],
and then press the [ ] button again.
●● [ID Photo] and [Sequence] cannot be chosen on Canon-brand
PictBridge-compatible printers from CP720/CP730 and earlier
models.
4 Print the image.
136
Adding Images to the Print List (DPOF)
 Still Images  Movies
Batch printing (= 138) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of
copies, as follows. The printing information you prepare this way will
conform to DPOF (Digital Print Order Format) standards.
Configuring Print Settings
 Still Images  Movies
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print
list.
●● Press the [
] button, and then
choose [Print Settings] on the [ ] tab.
Choose and configure items as desired
(= 27).
●● Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
●● [ ] may be displayed on the camera to warn you that the
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
●● Setting [Date] to [On] may cause some printers to print the date
twice.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
●● Specifying [Index] will prevent you from choosing [On] for both
[Date] and [File No.] at the same time.
●● Index printing is not available on some Canon-brand PictBridgecompatible printers (sold separately).
●● The date is printed in a format matching setting details in [Date/
Time] on the [ ] tab (= 19).
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Up Printing for Individual Images
 Still Images Setting Menu
 Movies
Accessories
1 Choose [Select Images & Qty.].
Standard
Print Type
Index
Both
Date
File No.
Clear
DPOF data
On
Off
On
Off
On
Off
One image is printed per sheet.
Smaller versions of multiple images are
printed per sheet.
Both standard and index formats are
printed.
Images are printed with the shooting date.
–
Images are printed with the file number.
–
All image print list settings are cleared
after printing.
–
●● Press the [
] button, choose
[Select Images & Qty.] on the [ ] tab,
and then press the [ ] button.
Appendix
Index
2 Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
●● You can now specify the number of
copies.
●● If you specify index printing for the
image, it is labeled with a [ ] icon. To
cancel index printing for the image, press
the [ ] button again. [ ] is no longer
displayed.
137
3 Specify the number of prints.
Clearing All Images from the Print List
●● Press the [ ][ ] buttons to specify the
number of prints (up to 99).
●● To set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
●● Printing quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
●● When finished, press the [
to return to the menu screen.
] button
 Still Images ●● Following step 1 in “Setting Up Printing
for Individual Images” (= 137), choose
[Clear All Selections] and press the [ ]
button.
 Movies
●● Following step 1 in “Setting Up Printing
for Individual Images” (= 137), choose
[Select Range] and press the [ ] button.
●● Follow steps 2 – 3 in “Selecting a Range”
(= 78) to specify images.
●● Press the [ ][ ] buttons to choose
[Order], and then press the [ ] button.
Basic Guide
Advanced Guide
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Camera Basics
Auto Mode / Hybrid Auto
Mode
Printing Images Added to the Print List (DPOF)
 Still Images Setting Up Printing for a Range of Images
Before Use
Other Shooting Modes
 Movies
P Mode
●● When images have been added to the
print list (= 137 – = 138), this screen
is displayed after you connect the camera
to a PictBridge-compatible printer. Press
the [ ][ ] buttons to choose [Print now],
and then simply press the [ ] button to
print the images in the print list.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Any DPOF print job that you temporarily
stop will be resumed from the next image.
Accessories
Appendix
Setting Up Printing for All Images
 Still Images  Movies
Index
●● Following step 1 in “Setting Up Printing
for Individual Images” (= 137), choose
[Select All Images] and press the [ ]
button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
138
2 Choose an image.
Adding Images to a Photobook
 Still Images  Movies
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when
ordering printed photobooks online or printing photobooks with your own
printer.
Choosing a Selection Method
●● Press the [
] button, choose
[Photobook Set-up] on the [
] tab, and
then choose how you will select images.
Before Use
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
●● [
] is displayed.
●● To remove the image from the photobook,
press the [ ] button again. [ ] is no
longer displayed.
Basic Guide
Advanced Guide
Camera Basics
●● Repeat this process to specify other
images.
Auto Mode / Hybrid Auto
Mode
●● When finished, press the [
to return to the menu screen.
Other Shooting Modes
] button
P Mode
Adding All Images to a Photobook
 Still Images  Movies
Playback Mode
●● Following the procedure in “Choosing
a Selection Method” (= 139), choose
[Select All Images] and press the [ ]
button.
●● [ ] may be displayed on the camera to warn you that the
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
 Still Images 1
 Movies
Choose [Select].
●● Following the procedure in “Choosing
a Selection Method” (= 139), choose
[Select] and press the [ ] button.
Setting Menu
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Accessories
Appendix
Removing All Images from a Photobook
Adding Images Individually
Wi-Fi Functions
 Still Images  Movies
Index
●● Following the procedure in “Choosing
a Selection Method” (= 139), choose
[Clear All Selections] and press the [ ]
button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
139
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Appendix
Helpful information when using the camera
Before Use
Basic Guide
Advanced Guide
Camera Basics
Power
Auto Mode / Hybrid Auto
Mode
Nothing happens when the power button is pressed.
●●
●●
●●
●●
Confirm that the battery pack is charged (= 17).
Confirm that the battery pack is inserted facing the correct way (= 18).
Confirm that the memory card/battery cover is fully closed (= 18).
Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
Other Shooting Modes
P Mode
Playback Mode
The battery pack runs out of power quickly.
●● Battery performance decreases at low temperatures. Try warming the battery
pack a little by putting it in your pocket, for example, ensuring that the terminals
do not touch any metal objects.
●● Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
●● If these measures do not help and the battery pack still runs out of power soon
after charging, it has reached the end of its life. Purchase a new battery pack.
Wi-Fi Functions
Setting Menu
Accessories
The lens is not retracted.
●● Do not open the memory card/battery cover while the camera is on. Close the
cover, turn the camera on, and then turn it off again (= 18).
Appendix
Index
The battery pack is swollen.
●● Battery swelli