CTK6000_e_Cover1-4.fm 1 ページ
2010年7月12日 月曜日 午後12時53分
E
USER’S GUIDE
Please keep all information for future reference.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
K
Safety Precautions
Before trying to use the keyboard, be sure to read the
separate “Safety Precautions”.
MA1007-A Printed in China
CTK6000/WK6500E1A
CTK6000/WK6500E1A
CTK6000_e_Cover1-4.fm 2 ページ
2010年7月12日 月曜日 午後12時53分
Messages
O : Yes
X : No
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
O
O
X
O
O
X
X
O
X
O
X
X
: All sound off
: Reset all controller
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
Aux
System Exclusive
:True #
Program
Change
X
X
O
O
: Clock
: Commands
System
Real Time
X
X
X
X
X
X
: Song Pos
: Song Sel
: Tune
System
Common
O *2
O 0 - 127
O *2
O 0 - 127
Filter cutoff
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4
DSP Parameter5
DSP Parameter6
DSP Parameter7
Reverb send
Chorus send
NRPN LSB, MSB
RPN LSB, MSB
O
O
O
O
O
O
O
O
O
O
O *2
O *2
O
O
O
O
O
O
O
O
X
O
O *2
O *2
*3
*3
*3
O
O
O *2
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
X
O
O
O
O
O
O
O
O
O
Control
Change
Key’s
Ch’s
After
Touch
Pitch Bender
Note ON
Note OFF
Velocity
Note
Number
True voice
0
1
6, 38
7
10
11
16
17
18
19
64
66
67
72
73
O
*2
O
X
O
X
X
O 9nH v = 1 - 127
X 9nH v = 0, 8nH V =**
O 9nH v = 1 - 127
X 9nH v = 0
0 - 127
0 - 127 *1
0 - 127
Mode 3
X
Mode 3
X
Default
Messages
Altered
Mode
1 - 16
1 - 16
1 - 16
1 - 16
Default
Changed
Basic
Channel
Recognized
Transmitted
Function
Models: CTK-6000 / WK-6500
74
76
77
78
80
81
82
83
91
93
98, 99
100, 101
Bank select
Modulation
Data entry LSB, MSB
Volume
Pan
Expression
DSP Parameter0
DSP Parameter1
DSP Parameter2
DSP Parameter3
Hold 1
Sostenuto
Soft pedal
Release time
Attack time
Declaration of Conformity
Model Number: CTK-6000/WK-6500
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Remarks
Remarks
Version : 1.0
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
*1: Depends on tone.
*2: For details about NRPN, RPN, and system exclusive messages, see MIDI Implementation at
http://world.casio.com/.
*3: In accordance with pedal effect setting.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CTK6000_e.book
3 ページ
2010年7月12日 月曜日 午後12時50分
Important!
Please note the following important information before using this product.
• Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check
the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is
seriously damaged.
• Never attempt to recharge batteries.
• Do not use rechargeable batteries.
• Never mix old batteries with new ones.
• Use recommended batteries or equivalent types.
• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.
• Replace batteries as soon as possible after any sign they are getting weak.
• Do not short-circuit the battery terminals.
• The product is not intended for children under 3 years.
• Use only a CASIO AD-A12150LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
● The contents of this manual are subject to change without notice.
● The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
● Company and product names used in this manual may be registered trademarks of others.
E-1
CTK6000_e.book
2 ページ
2010年7月12日 月曜日 午後12時50分
Contents
General Guide ............................. E-4
Applying Effects to a Sound .... E-32
Reading the Display ...........................................E-6
Modes.................................................................E-7
Menus.................................................................E-7
, Precautions while “Please Wait” is
displayed ............................................................E-7
Saving Settings ..................................................E-8
Configuration of Effects.................................... E-32
Selecting an Effect ........................................... E-34
Creating a User DSP ....................................... E-37
Returning the Digital Keyboard to Its
Factory Default Settings .....................................E-8
Getting Ready to Play ................ E-9
Preparing the Music Stand .................................E-9
Power Supply .....................................................E-9
Connections .............................. E-11
Connecting Headphones ..................................E-11
Connecting a Pedal ..........................................E-11
Connecting a Microphone (WK-6500 only).......E-11
Connecting Audio Equipment or
an Amplifier ......................................................E-12
Bundled and Optional Accessories ..................E-12
Selecting and Playing a Tone .. E-13
To turn on Digital Keyboard power ...................E-13
Listening to Demo Tunes .................................E-14
Selecting a Tone ..............................................E-14
Layering and Splitting Tones ............................E-15
Raising and Lowering Keyboard Tuning
(Transpose) ......................................................E-18
Using Octave Shift............................................E-18
Using the Metronome .......................................E-19
Using the Pitch Bend Wheel.............................E-20
Selecting a Temperament and
Fine Tuning Its Scale........................................E-21
Playing Arpeggio Phrases Automatically
(Arpeggiator) ....................................................E-23
Using Auto Accompaniment ... E-24
Playing an Auto Accompaniment .....................E-24
Selecting a Chord Fingering Mode ...................E-26
Modifying Auto Accompaniment Patterns.........E-27
Using One-Touch Presets ................................E-27
Using Auto Harmonize .....................................E-28
Using the Rhythm Editor ..................................E-29
E-2
Using the Mixer ......................... E-39
Mixer Overview ................................................ E-39
Mixer Operation ............................................... E-40
Mixer Parameter Settings ................................ E-42
Using the Tone Editor............... E-45
Tone Creation Overview .................................. E-45
Creating a User Tone....................................... E-46
Tone Parameter Settings ................................. E-48
Music Presets............................ E-50
Using Music Presets ........................................ E-50
Creating a User Preset .................................... E-54
Editing a Chord Progression ............................ E-58
Saving Keyboard Setups to
Registration Memory ................ E-62
To save a setup to registration memory........... E-63
To recall a setup from registration memory ..... E-63
Using the Song Sequencer ...... E-64
Starting One-touch Recording (EASY REC) .... E-64
What you can do with the song sequencer ...... E-66
Recording Individual Tracks............................. E-68
Using Panel Record to Rewrite
Song Header Settings...................................... E-72
Playing a Recorded Song ................................ E-73
Editing a Song.................................................. E-75
Editing a Track ................................................. E-79
Editing Events .................................................. E-81
Directly Inputting Note Events (Step Input) ...... E-94
Using the Function Menu ......... E-96
Using the Function Menu ................................. E-96
Function Menu Settings ................................... E-97
CTK6000_e.book
3 ページ
2010年7月12日 月曜日 午後12時50分
Contents
Using a Memory Card............. E-102
Loading and Removing a Memory Card.........E-103
Entering the Card Mode .................................E-103
Formatting a Memory Card.............................E-103
Saving Digital Keyboard Data to a
Memory Card..................................................E-104
Loading Data from a Memory Card ................E-106
To delete a file from a memory card...............E-107
To rename a file on a memory card................E-107
Playing a Music File from a Memory Card......E-108
Error Messages ..............................................E-111
Connecting to a Computer .... E-112
Minimum Computer System Requirements....E-112
Storing and Loading Digital Keyboard
Memory Data ..................................................E-113
Reference ................................ E-114
Troubleshooting..............................................E-114
Specifications .................................................E-116
Operating Precautions....................................E-118
DSP Effect List ...............................................E-119
Fingering Guide ..............................................E-124
Supported Input Characters ...........................E-124
Chord Example List ........................................E-125
Assigning a MIDI Channel to Each Part .........E-126
Parameter List ................................................E-127
MIDI Implementation Chart
E-3
CTK6000_e.book
4 ページ
2010年7月12日 月曜日 午後12時50分
General Guide
• Illustrations in this User’s Guide show the WK-6500.
L-1 - L-18
C-1 - C-13
Dial
S-1
T-1 - T-8
Back
E-4
R-1 - R-20
CTK6000_e.book
5 ページ
2010年7月12日 月曜日 午後12時50分
General Guide
• In this manual, the term “Digital Keyboard” refers to the CTK-6000/WK-6500.
• This manual uses the numbers and names below to refer to buttons and controllers.
• The following explains the meanings of the # and $ symbols that appear on the product console and with the key names
below.
# : Indicates a function that is enabled by holding down the R-13 (FUNCTION) button when pressing a button. For example,
SONG SEQUENCER, # EDIT means that the EDIT function is enabled by depressing the R-13 (FUNCTION) button.
$ : Indicates a function that is enabled by holding down the button for some time. For example, METRONOME, BEAT $ means that the BEAT
function is enabled by holding down the button for some time.
L-1
POWER button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞13
L-2
MAIN VOLUME knob. . . . . . . . . . . . . . . . . . . . . . . . . ☞13
L-3
MIC VOLUME knob (WK-6500 only) . . . . . . . . . . . . . ☞11
TONE buttons
RHYTHM buttons
L-4
[A] POPS/ROCK/DANCE button . . . . . . . . . . ☞14, 24
L-5
[B] JAZZ/EUROPEAN button . . . . . . . . . . . . . . . ☞24
L-6
[C] LATIN button . . . . . . . . . . . . . . . . . . . . . . . . . ☞24
L-7
[D] WORLD/VARIOUS,
MUSIC PRESET button . . . . . . . . . . . . . . . . . ☞24,50
R-1
[A] PIANO, 5 button. . . . . . . . . . . . . . . . . ☞14, 59, 88
R-2
[B] E. PIANO, 1 button. . . . . . . . . . . . . . . ☞14, 59, 88
R-3
[C] ORGAN, 2 button . . . . . . . . . . . . . ☞14, 59, 88, 89
R-4
[D] GUITAR, • button . . . . . . . . . . . . . . . . ☞14, 59, 88
R-5
[E] BASS, REST button . . . . . . . . . . . . . . . . . ☞14, 94
R-6 [F] STRINGS button. . . . . . . . . . . . . . . . . . . . . . . ☞14
R-7
[G] BRASS, 6 button. . . . . . . . . . . . . ☞14, 59, 88, 89
R-8
[H] REED/PIPE, 7 button . . . . . . . . . ☞14, 59, 88, 89
[E] PIANO RHYTHMS,
ONE TOUCH PRESET button . . . . . . . . . ☞24, 27, 50
R-9
[I] SYNTH, 8 button. . . . . . . . . . . . . . . . . ☞14, 88, 89
[F] USER RHYTHMS button . . . . . . . . . . . . . ☞24, 27
R-11 [K] GM/DRUMS, . button. . . . . . . . . . . ☞14, 94
L-10 METRONOME, $BEAT button . . . . . . . . . . . . . . . . ☞19
R-12 [L] USER TONES button . . . . . . . . . . . . . . . . ☞14, 46
L-11 TEMPO w button . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞19
R-13 FUNCTION button. . . . . . . . . . . . . . . . . . . . . . . . . . . ☞96
L-12 TEMPO q, #TAP button . . . . . . . . . . . . . . . . . . ☞19
R-14 NO/y/–, YES/t/+,
#TRANSPOSE buttons . . . . . . . . . . . . ☞6, 14, 18, 24
L-8
L-9
RHYTHM/SONG CONTROLLER buttons
R-10 [J] OTHERS, , button . . . . . . . . . . ☞14, 59, 88, 89
R-15 EXIT button
L-13 INTRO, REPEAT button . . . . . . . . . . . . . ☞27, 74, 108
R-16 ENTER button
L-14 NORMAL/FILL-IN, sREW button . ☞14, 27, 73, 108
R-17 u, t, y, i buttons . . . . . . . . . . . . . . . . . . . . . . . . ☞7
L-15 VARIATION/FILL-IN, dFF button . ☞14, 27, 73, 108
L-16 SYNCHRO/ENDING, PAUSE button ☞24, 27, 73, 108
L-17 START/STOP, PLAY/STOP,
DEMO button . . . . . . . . . . . . . . . . . . ☞14, 24, 73, 108
R-18 AUTO HARMONIZE/ARPEGGIATOR,
$TYPE button. . . . . . . . . . . . . . . . . . . . . . . . . . ☞23, 28
R-19 SPLIT button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞15
R-20 LAYER, $OCTAVE button. . . . . . . . . . . . . . . . ☞15, 18
L-18 ACCOMP ON/OFF, $CHORDS,
PART SELECT, DEMO button . . . . . ☞14, 24, 26, 109
S-1
PITCH BEND wheel . . . . . . . . . . . . . . . . . . . . . . . . . ☞20
T-1
SD CARD SLOT . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞102
C-1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞6
T-2
USB jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞112
C-2
RHYTHM EDITOR button . . . . . . . . . . . . . . . . . . . . . ☞29
T-3
SUSTAIN/ASSIGNABLE JACK . . . . . . . . . . . . . . . . ☞11
C-3
SONG SEQUENCER, #EDIT button . . . . . ☞7, 68, 75
T-4
PHONES jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞11
C-4
RECORD button . . . . . . . . . . . . . . . . . . . . . . ☞64, 68, 69
T-5
AUDIO IN jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞12
C-5
MIXER, #EFFECT button . . . . . . . . . . . . . . . . ☞34, 40
T-6
DC 12V jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞9
C-6
TONE EDITOR, #SCALE button . . . . . . . . . . ☞21, 46
T-7
MIC IN jack (WK-6500 only) . . . . . . . . . . . . . . . . . . . ☞11
C-7
CARD, #LOAD/SAVE button . . . . . ☞7, 103, 104, 106
T-8
LINE OUT R, L/MONO jacks . . . . . . . . . . . . . . . . . . ☞12
Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ☞6, 14, 24
REGISTRATION buttons
C-8
BANK, DELETE button . . . . . . . . . . . ☞59, 62, 86, 93
C-9
1, INSERT button . . . . . . . . . . . . . . . . ☞59, 62, 88, 94
C-10 2, COPY button. . . . . . . . . . . . . . . . . . . . . . . . ☞62, 88
C-11 3, QUANTIZE button . . . . . . . . . . . . . . . . . . . ☞62, 89
C-12 4, STEP button . . . . . . . . . . . . . . . . . . . . . ☞60, 62, 94
C-13 STORE, #MENU button . . . . . . . . . . . . . . . ☞7, 62
E-5
CTK6000_e.book
6 ページ
2010年7月12日 月曜日 午後12時50分
General Guide
 Tempo, measure, beat area
Reading the Display
This section explains the contents of the Digital Keyboard’s
display screen.
1
2
Tempo is shown as the current setting value, as beats per
minute. Auto Accompaniment, the metronome (page
E-19), and other playback is performed at the tempo
shown here. The MEASURE and BEAT values are
counted up as Auto Accompaniment, the metronome, or
other playback progresses.
Currently Selected Item Indication
The item that is currently selected on a display screen is
indicated by thick brackets (%) and by a large dot (0). The
currently selected item is the one that is affected by the R-14
(–, +) buttons or dial operations.
4 5
6
3
 Detailed information area
This area displays a variety of information while the Digital
Keyboard is being used. Use this area to confirm proper
operation when changing values, when selecting a menu
item, and when performing other operations.
 Level meter area
This level meter shows the volume level of the notes that
are sounded when you play something on the keyboard or
when Auto Accompaniment is played. There are a total of
32 parts, 16 each in Group A and Group B. The L
indicator will be displayed in the lower left corner while
Group A parts are being indicated by the level meter, while
the M indicator will be displayed in the lower left corner
while Group B parts are being indicated.
For details about parts, see “How Parts are Organized”
(page E-39).
 Indicator areas
The indicator area shows such information as the current
mode (page E-7), the status of settings, the status of Auto
Accompaniment, and other information.
There are two types of indicators: text type indicators such
as :, and pointer (K) type indicators. In the case of
pointer type indicators, a setting or status is indicated by
the location of the K next to fixed text along the sides of the
display. For example, the location of the pointer (K) on the
right side of the display in the sample below indicates
REVERB.
 Registration bank area
This area shows the number of the currently selected
registration bank (page E-62).
 Chord area
This area shows the chord being played when Auto
Accompaniment (page E-24) or music preset (page E-50)
is being used. It also can display fraction chords by
showing the chord root (C, G, etc.) and type (m, 7th, etc.).
E-6
On this screen, “RHYTHM” is selected because it is enclosed
by thick brackets. This indicates that the rhythm setting can be
changed.
On this screen, “Touch” is selected because the 0 is next to
it. This indicates that the value to the right of “Touch”, which is
enclosed in thick brackets, can be changed.
CTK6000_e.book
7 ページ
2010年7月12日 月曜日 午後12時50分
General Guide
Modes
Menus
Your Digital Keyboard has three modes: a rhythm mode, a
card mode, and a song sequencer mode. The currently
selected mode is shown as an indicator on the display.
Card mode
C-7 (CARD) or
R-15 (EXIT) button
You can use the same operations to display mode and
function specific menus. To display a menu, hold down the
R-13 (FUNCTION) button as you press the C-13 (MENU)
button. For example, the “Performance” menu shown below
will appear if you perform the above operation while in the
rhythm mode. This menu provides instant access to
performance functions.
C-7 (CARD) button
Rhythm mode
C-3 (SONG
SEQUENCER) button
C-3 (SONG SEQUENCER) or
R-15 (EXIT) button
Song sequencer mode
• Rhythm mode (: indicator displayed)
The rhythm mode is the initial power on default mode. The
rhythm mode is the base mode, and it is the mode you
should enter when you want to play on the keyboard or use
Auto Accompaniment.
• Card mode (; indicator displayed)
Enter the card mode when you want to perform memory
card operations. See “Using a Memory Card” (page E-102)
for more information.
– In the rhythm mode, pressing the C-7 (CARD) button will
enter the card mode.
– In the card mode, pressing the C-7 (CARD) button or the
R-15 (EXIT) button will return to the rhythm mode.
• Song sequencer mode (< indicator displayed)
Enter the sequencer mode when you want to record
performances using the keyboard and Auto
Accompaniment, or to play back song data. For details, see
“Using the Song Sequencer” (page E-64).
– In the rhythm mode, pressing the C-3 (SONG
SEQUENCER) button will enter the song sequencer
mode.
– In the song sequencer mode, pressing the C-3 (SONG
SEQUENCER) button or the R-15 (EXIT) button will
return to the rhythm mode.
• The currently selected item is the one with the 0 next to it.
You can use the R-17 (t, y) buttons to move the 0 up
and down. You also can use the R-17 (u, i) buttons to
scroll between menu pages.
• To exit a displayed menu, press the R-15 (EXIT) button.
You may need to press the R-15 (EXIT) button more than
once in some cases.
• The menu items and operations for specific modes and
functions are described in each section of this user’s guide.
, Precautions while “Please
Wait” is displayed
Never try to perform any operation, or insert or remove a
memory card while the message “Please Wait” is on the
display. Wait until the message disappears.
• “Please Wait” indicates that the Digital Keyboard is
performing a data save operation. Turning off the Digital
Keyboard or removing the memory card can cause Digital
Keyboard data to be deleted or become corrupted. It also
can cause the Digital Keyboard to fail to turn on when the
L-1 (POWER) button is pressed.
• If this happens, refer to “Troubleshooting” (page E-114).
• After entering any mode besides the rhythm mode and
performing the operations you want, be sure to return
to the rhythm mode. The rhythm mode is the initial
power on default mode.
• Unless otherwise specifically noted, all of the
operations described in this user’s guide are
performed in the rhythm mode.
E-7
CTK6000_e.book
8 ページ
2010年7月12日 月曜日 午後12時50分
General Guide
Saving Settings
Your Digital Keyboard is equipped with a song sequencer and
other features that you can use to store data you create. This
stored data is retained even when the Digital Keyboard is
turned off.*
However, the tone, rhythm, and other settings you configure
on the Digital Keyboard’s console normally are returned to
their initial power on defaults whenever you turn off power.
You can configure the Digital Keyboard so it remembers its
latest setup or to apply a predetermined default setup each
time you turn it on. For details, see “AutoResume (Auto
Resume)” (page E-100) and “Default (Default Settings)” (page
E-100).
* The following data and settings are always retained even
when power is turned off.
– Registration setup data (page E-62)
– Song sequencer data (page E-64)
– User rhythm data (page E-29)
– User preset data (page E-54)
– User tone data (page E-45)
– Scale fine tuning setting (page E-22)
– Auto Resume setting (page E-100)
Returning the Digital Keyboard to
Its Factory Default Settings
You can delete all data in keyboard memory and return all
keyboard parameters to their initial factory default settings.
For details, see “To initialize all data and settings (or
parameter settings only)” (page E-101).
E-8
CTK6000_e.book
9 ページ
2010年7月12日 月曜日 午後12時50分
Getting Ready to Play
Preparing the Music Stand
Music stand
Using a Household Power Outlet
Make sure that you use only the AC adaptor (JEITA Standard,
with unified polarity plug) specified for this product. Use of a
different type of AC adaptor can cause malfunction.
Specified AC Adaptor: AD-A12150LW
Use the supplied power cord to connect the AC adaptor as
shown in the illustration below.
T-6 (DC 12V) jack
Household power outle
Power Supply
Prepare a household power outlet or batteries.
Power cord
• Be sure to comply with the separate “Safety
Precautions”. Incorrect use of this product creates the
risk of electric shock and fire.
• Always make sure that the product is turned off before
plugging in or unplugging the AC adaptor, or before
loading or removing batteries.
AC adaptor
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
• To prevent breaking of the wire, take care to avoid
putting any type of load on the power cord.
No bending!
No winding!
• Never insert metal, pencils, or any other objects into
the product’s DC 12V jack. Doing so creates the risk of
accident.
E-9
CTK6000_e.book
10 ページ
2010年7月12日 月曜日 午後12時50分
Getting Ready to Play
■ Low Battery Indication
Using Batteries
You can use six D-size batteries for power.
• Use alkaline or zinc-carbon batteries.
Never use oxyride or any other nickel based batteries.
1. Open the battery cover on the bottom of the
Digital Keyboard.
The following shows the approximate battery life.
4 hours* on alkaline batteries
* The above values are standard battery life at normal
temperature, with the volume at medium setting.
Temperature extremes or playing at very loud volume
settings can shorten battery life.
The indicators shown below start to flash to let you know
when battery power is low. Replace the batteries with new
ones.
2. Load six D-size batteries into the battery
compartment.
• Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
Low battery indication (flashing)
3. Insert the tabs of the battery cover into the
holes on the side of the battery compartment,
and close the cover.
Tabs
E-10
CTK6000_e.book
11 ページ
2010年7月12日 月曜日 午後12時50分
Connections
Connecting Headphones
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
Connecting a Microphone
(WK-6500 only)
You can connect a dynamic microphone (only) to the Digital
Keyboard for output thorough the Digital Keyboard’s
speakers.
T-4 (PHONES) jack
T-7 (MIC IN) jack
• Headphones do not come with the Digital Keyboard.
• Use commercially available headphones.
• Do not listen to very high volume output over
headphones for long periods. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
Connecting a Pedal
Connecting an optionally available pedal let’s you perform
pedal operations that add more versatility to your keyboard
play. For information about the types of effects that can be
applied by pressing the pedal, see “Ped.Assign (Pedal
Assign)” (page E-97).
• You can adjust the volume level of microphone input with
the L-3 (MIC VOLUME) knob. Microphone volume control
is independent of overall keyboard volume.
• Built-in effects (reverb, chorus, DSP) are also applied to
input from the microphone. You also can use the Mixer to
adjust how effects are applied, the speaker stereo pan
position, and other parameters.
For details, see “Selecting and Playing a Tone” (page E-13)
and “Using the Mixer” (page E-39).
• Before connecting a microphone, make sure that the
Digital Keyboard and microphone are turned off.
• Before connecting a microphone, set both the L-2
(MAIN VOLUME) and L-3 (MIC VOLUME) knobs to low
levels. Adjust volume settings to appropriate levels
after connecting the microphone.
T-3 (SUSTAIN/ASIGNABLE) jack
E-11
CTK6000_e.book
12 ページ
2010年7月12日 月曜日 午後12時50分
Connections
Connecting Audio Equipment or
an Amplifier
You can connect audio equipment or a music amplifier to the
Digital Keyboard and then play through external speakers for
more powerful volume and better sound quality.
• Whenever connecting a device to the Digital Keyboard,
first use the L-2 (MAIN VOLUME) knob to set the
volume to a low level. After connecting, you can adjust
the volume to the level you want.
• Whenever you connect any device to the Digital
Keyboard, be sure to read the user documentation that
comes with the device.
Pin plug
Playing an External Device from the Digital
Keyboard 
Use a commercially available connecting cord to connect the
external audio equipment to the Digital Keyboard’s T-5
(AUDIO IN) jack as shown in Figure . The connecting cord
should have a stereo mini plug on one end and a plug that
matches the configuration of the external device on the other
end. Use the L-2 (MAIN VOLUME) knob to adjust the volume
level.
Portable audio player, etc.
Stereo mini plug
Audio amplifier AUX IN jack, etc.
RIGHT (Red)
LEFT (White)
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2
Bundled and Optional
Accessories
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
Standard plug
Outputting Keyboard Notes to Audio
Equipment 
Use commercially available connecting cords to connect the
external audio equipment to the Digital Keyboard’s T-8 (LINE
OUT) jacks as shown in Figure . LINE OUT R jack output is
right channel sound, while LINE OUT L/MONO jack output is
left channel sound. It is up to you to purchase connecting
cords like the ones shown in the illustration for connection of
audio equipment. Normally in this configuration you must set
the audio equipment’s input selector to the setting that
specifies the terminal (such as AUX IN) to which the Digital
Keyboard is connected. Use the L-2 (MAIN VOLUME) knob
to adjust the volume level.
Outputting Keyboard Notes to a Musical
Instrument Amplifier 
Use a commercially available connecting cord to connect the
amplifier to either of the Digital Keyboard’s T-8 (LINE OUT)
jacks as shown in Figure . LINE OUT R jack output is right
channel sound, while LINE OUT L/MONO jack output is left
channel sound. Connecting to the LINE OUT L/ MONO jack
only outputs a mixture of both channels. It is up to you to
purchase connecting cord like the one shown in the illustration
for connection of the amplifier. Use the L-2 (MAIN VOLUME)
knob to adjust the volume level.
E-12
• You can get information about accessories that are sold
separately for this product from the CASIO catalog
available from your retailer, and from the CASIO website at
the following URL.
http://world.casio.com/
CTK6000_e.book
13 ページ
2010年7月12日 月曜日 午後12時50分
Selecting and Playing a Tone
L-1
L-4
R-1
R-12
R-1 - R-12
L-2
R-14
L-17
L-14
L-18
L-15
R-19
R-20
To turn on Digital Keyboard power
1. Rotate the L-2 (MAIN VOLUME) knob towards
MIN to set the volume to a low level.
2. Referring to “Connections” (page E-11),
connect headphones, amplifier, or other device.
3. Use the L-1 (POWER) button to turn on power.
• The Digital Keyboard display screen wi