Casio ONE-X 1603SW User's Manual

Avaya one-X™ Deskphone Value Edition
1603/1603SW IP Telephone
User Guide
16-601444
Issue 1
July 2007
Contents
Contents
Notices ..................................................................................................... 3
Introduction to the 1603 IP Telephone .................................................. 5
Overview .................................................................................................................. 5
About LEDs .............................................................................................................. 6
About Icons .............................................................................................................. 7
About Paper Labels .................................................................................................. 7
About logging in to your telephone ...................................................... 7
Logging in to your telephone .................................................................................... 8
Logging out of your telephone .................................................................................. 8
Making a Call ........................................................................................... 8
Redialing a number ................................................................................. 8
Answering a Call ..................................................................................... 8
Muting a Call ............................................................................................ 8
Putting a Call on Hold ............................................................................. 9
Transferring a Call .................................................................................. 9
About Conference Calls ......................................................................... 9
Making a conference call .......................................................................................... 9
Adding a person on hold to a conference call .......................................................... 9
Putting a conference call on hold ........................................................................... 10
Dropping the last person added to a conference call ............................................. 10
Getting Your Messages ........................................................................ 10
Logging into your voice mail ................................................................................... 10
About Bridged Appearances and Shared Lines ................................. 10
Answering a call on a bridged appearance ............................................................ 10
Joining a call on a bridged appearance .................................................................. 11
Making an outgoing call on a bridged appearance ................................................. 11
About Advanced Telephone Features ................................................. 11
About the Avaya Menu ......................................................................... 11
Adjusting the brightness or contrast of the display ................................................. 11
Changing the ring pattern ....................................................................................... 12
Turning button click sounds on and off ................................................................... 12
Turning error tones on or off ................................................................................... 12
Turning visual alerting on or off .............................................................................. 12
Setting Automatic Gain Control .............................................................................. 12
Changing the language .......................................................................................... 13
Viewing Network Information .................................................................................. 13
Index ....................................................................................................... 15
2 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
Notices
Notices
© Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in this document was
complete and accurate at the time of printing, Avaya Inc. can assume no liability for any
errors. Changes and corrections to the information in this document may be incorporated
in future releases.
Note:
Using a cell, mobile, or GSM phone, or a two-way radio in close proximity to an Avaya IP
Phone might cause interference.
For full legal page information, please see the complete document, Avaya Legal Page for
Hardware Documentation, Document number 03-600759.
To locate this document on our website, simply go to http://www.avaya.com/support and
search for the document number in the search box.
Documentation disclaimer
Avaya Inc. is not responsible for any modifications, additions, or deletions to the original
published version of this documentation unless such modifications, additions, or deletions
were performed by Avaya. Customer and/or End User agree to indemnify and hold
harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits,
demands, and judgments arising out of, or in connection with, subsequent modifications,
additions or deletions to this documentation to the extent made by the Customer or End
User.
Link disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked Web sites
referenced elsewhere within this documentation, and Avaya does not necessarily endorse
the products, services, or information described or offered within them. We cannot
guarantee that these links will work all of the time and we have no control over the
availability of the linked pages.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer to your sales agreement to
establish the terms of the limited warranty. In addition, Avaya's standard warranty
language, as well as information regarding support for this product, while under warranty,
is available through the following Web site:
http://www.avaya.com/support
Copyright
Except where expressly stated otherwise, the Product is protected by copyright and other
laws respecting proprietary rights. Unauthorized reproduction, transfer, and or use can be
a criminal, as well as a civil, offense under the applicable law.
Avaya support
Avaya Inc. provides a telephone number for you to use to report problems or to ask
questions about your product. The support telephone number is 1-800-242-2121 in the
United States. For additional support telephone numbers, see the Avaya Web site:
Issue 1 July 2007 3
http://www.avaya.com/support
4 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
Introduction to the 1603 IP Telephone
Introduction to the 1603 IP Telephone
The 1603 IP telephone is a multiline IP telephone for use with an Avaya call processing
system. The 1603 IP telephone puts convenient features and capabilities at your fingertips,
including a Conference, Transfer, Hold, and Redial button and a menu of options and
settings to customize your phone.
Not all features described in this user guide may be available on your telephone. If you
find that a feature is not available, contact your system administrator.
Overview
Issue 1 July 2007 5
About LEDs
1603 IP Telephone Button/Feature Descriptions
Name
Description
Message Waiting An illuminated red light in the upper-right corner of your phone
Indicator
indicates you have voicemail messages waiting. If Visual Alerting is
enabled, this light flashes when you receive an incoming call.
Phone Display
There are two lines in the phone display. The phone display presents
calling or called party identification, user options, and other
information relevant to using the phone.
Avaya Menu
Press the A button to access the Avaya menu. Press the A button
twice to exit the Avaya menu. The Avaya menu provides options that
allow you to customize phone settings, select the display language,
view network information, and log out.
Redial
Press Redial to dial the last number you dialed.
Hold
Press Hold to put the active call on hold.
Conference
Press Conference to add another party to an existing call.
Transfer
Press Transfer to transfer a call to another number.
Drop
Press Drop to drop the active call. While on a conference call, press
Drop to drop the last person added to the conference call.
Volume
Press + or - on the volume button while active on the handset or
speaker to adjust the volume. To adjust the volume of the ringer,
press + or - on the volume button while the handset and speaker are
inactive.
Mute
Press Mute to mute a call in progress. To take a call off mute, press
Mute again.
Speaker
Press Speaker to use the speakerphone. To take a call off
speakerphone, lift the handset.
Feature Buttons
and Call/Line
Appearance
Buttons
There are 3 buttons that can be programmed by the system
administrator as either call/line appearance buttons or feature
buttons. Press a call/line appearance button to make or answer a call
or resume a call on hold. Press a labeled feature button to enable or
disable that feature. Typically two buttons are administered as call/
line appearance buttons and one button is administered as a feature
button. The feature button provides access to an Avaya call
management system feature that has been administered for your
extension. The green LED next to the feature button indicates if the
feature is currently on or off. If the light is on, the feature is on. For
more information about Avaya call management system features,
see About Advanced Telephone Features.
About LEDs
Each call/line appearance button and feature button has two LEDs, one green and one
red, to indicate the status of the call/line appearance or feature. The status is identified by
whether the LED is turned on, off, or blinking as described in the following tables.
Table 1. Call/Line Appearance Button LEDs
LED
Description
Steady green
Call/line appearance is active.
Slow blinking green
Call/line appearance is ringing.
6 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
About logging in to your telephone
LED
Description
Fast blinking green
Call/line appearance is on hold.
Steady red
Call/line appearance is in use by you.
Off
Call/line appearance is available.
Table 2. Feature Button LEDs
LED
Description
Steady green
Feature is active.
Blinking green
Feature is pending (request is being
processed and not immediately available).
Off
Feature is not active.
About Icons
Icons are provided in the phone display to indicate the state of a call and navigation
choices. The icons that appear in the phone display are described in the following table.
Table 3. Icons in the Telephone Display
Icon
Description
Call is active.
Call is on hold.
Call is on soft hold (when using Conference or Transfer feature).
Incoming call is ringing.
Conference is active.
Conference is on hold.
Scroll left for other options.
Scroll right for other options.
Scroll up or down for other options.
About Paper Labels
Next to each call/line appearance button and feature button is a paper label. The label
identifies the call/line appearance number or the feature that has been programmed on
the button by your system administrator. You can remove the labels if you want to change
a label or write on a blank one. Printed labels are also available for your telephone. See
your system administrator for more information.
About logging in to your telephone
Logging in and out maintains your personal options if you share a telephone with other
users or if you want to use the same extension from another phone. Logging out also
prevents unauthorized use of your telephone during an absence.
Issue 1 July 2007 7
Logging in to your telephone
Logging in to your telephone
Log in from the initial screen that prompts you for your extension.
1.
2.
3.
4.
Enter your extension.
Press # to select OK.
Enter your password.
Press # to select OK.
Logging out of your telephone
1. Press the A button.
2. Press # to scroll to Log Out.
Note:
Log Out is not available if you are on a call.
3. Press * to select Log Out.
4. Press * again to confirm.
Making a Call
If you are not on a call, simply dial the number you want to call.
1. Lift the handset, press Speaker, or select an available line.
2. Dial the number you want to call.
Redialing a number
Press Redial to call the last number dialed.
Answering a Call
When you receive an incoming call, the incoming call is usually selected automatically.
However, if you are already on a call or if you receive more than one incoming call at a
time, you may need to select the call you want to answer manually.
Answer an incoming call in the following ways:
• If you are not on another call, lift the handset, or press the call/line appearance
button whose green LED flashes for the incoming call, or press Speaker to answer
using the speakerphone.
• If you are on another call, press the call/line appearance button whose green LED
flashes for the incoming call.
Note:
If the Auto Hold (Communication Manager) feature is enabled by your system
administrator, you can answer another call without first putting an active call on
hold. If Auto Hold is not enabled, you must put your active call on hold before
answering the incoming call; otherwise, you will drop the active call when you
answer the other one.
8 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
Muting a Call
Muting a Call
If a call is on mute and you switch between the handset, headset, or speakerphone, the
mute will be turned off. When the Mute button light is on, the call is muted.
1. Press the Mute button during a call so that the other person cannot hear you.
2. Press the Mute button again to unmute the call.
Putting a Call on Hold
1. Press Hold to put your active call on hold.
Note:
The blinking green LED next to the call/line appearance button indicates the call
is on hold.
2. To resume the call, do one of the following:
• If there is more than one call on hold, press the call/line appearance button
to resume the call.
• If there is only one call on hold, press the Hold button or the call/line
appearance button to retrieve the call.
Transferring a Call
1. If the call you want to transfer is not your active call, press the call/line appearance
button for the call you want to transfer.
2. Press Transfer.
3. Dial the telephone number.
Note:
To transfer the call to a call that is on hold, press the call/line appearance button
for the call that is on hold.
4. Press Transfer again or hang up to complete the transfer.
About Conference Calls
You can use conference calls to speak with up to three people in different locations on the
same call. Additional conferencing options may be available through Expanded Meet-Me
Conferencing. Contact your system administrator for more information about this feature.
Making a conference call
1. While active on a call, press Conference.
2. Dial the telephone number.
3. Press Conference to add the person to the existing call.
Adding a person on hold to a conference call
1. While active on a call, press Conference.
You hear a dial tone.
2. Press the call/line appearance button of the call on hold.
3. Press Conference again to add the person to the conference call.
Issue 1 July 2007 9
Putting a conference call on hold
Putting a conference call on hold
When you put a conference call on hold, the other parties can still talk to each other.
1. Press Hold during a conference call.
Note:
The blinking green LED next to the call/line appearance button indicates the
conference is on hold.
2. Press Hold to resume the conference call.
Dropping the last person added to a conference call
While active on a conference call, press Drop.
Getting Your Messages
A red light on the upper right-hand corner of your telephone indicates when you have
messages waiting. Your messages are an administered function. Contact your system
administrator with any questions.
Logging into your voice mail
1. To log in to your voice mail, follow the instructions provided by your system
administrator.
2. Once you are logged in, follow the voice prompts from your voice mail system.
About Bridged Appearances and Shared Lines
Your phone may show a bridged appearance on the display screen in addition to your own
lines. A bridged appearance typically belongs to someone else, but bridging allows you to
see if that line is in use, answer calls on that line, or join a call in progress on that line from
your telephone. You can also make outgoing calls on a bridged appearance when it is not
in use.
Depending on how your telephone system is configured, your phone may show shared
line appearances on the display screen in addition to your own lines. A shared line
appearance is a line that is shared among multiple users. You can answer a call, join a
call in progress, and make an outgoing call on a shared line appearance. The procedures
to answer, join, and make a call on a shared line appearance are similar as those for a
bridged appearance. But instead of using another person's line, you are using a shared
line.
Answering a call on a bridged appearance
To answer a call on a bridged appearance, press the call/line appearance button
associated with the bridged appearance.
Note:
The ringing bridged appearance will be selected automatically if there are no other active
calls. If the ringing appearance is displayed, you can answer by picking up the handset or
by pressing the Speaker button. If you are on another call when a call comes in to a bridged
10 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
About Advanced Telephone Features
appearance, you may have to select the ringing appearance button (just like for an
incoming call to a primary line).
Joining a call on a bridged appearance
To join an existing call on a bridged appearance, press the call/line appearance button
associated with the bridged appearance.
Making an outgoing call on a bridged appearance
When you make a call on a bridged appearance, you are using another person’s line. The
caller ID may show the call as coming from you or coming from the person whose line you
are using. If you have any questions about how the name or extension displays to the
person you are calling, contact your system administrator.
1. Press the call/line appearance button associated with the bridged appearance.
2. Dial the telephone number.
About Advanced Telephone Features
Avaya call management systems provide many advanced telephone features such as Call
Forwarding, Send All Calls, Abbreviated Dial buttons, and Extension to Cellular. One of
these features can be assigned by your system administrator to the feature button on your
telephone.
The feature button label identifies the feature that has been assigned for your telephone.
For more information about the feature administered for your telephone, and for other
features that are available for your extension, contact your system administrator.
About the Avaya Menu
You can use the Avaya Menu to adjust and customize phone settings, select the display
language, view network settings, and log out. To access the Avaya Menu, press the A
button. To exit the Avaya Menu, press the A button twice.
The Avaya Menu has five sub-menus:
• Screen—lets you adjust the display brightness and contrast and turn visual alerting
on and off.
• Sounds—lets you select your ringing pattern, turn button click sounds on and off,
and turn error tones on and off.
• Advanced—lets you select the display language, set automatic gain control on the
handset and speaker, or initiate a manual backup/restore if you have a backup/
restore file server. See your system administrator for more information.
• Network Information—shows a summary of network-related parameters for your
phone, such as IP parameters and Quality of Service.
• Log Out—lets you log out of your telephone to prevent unauthorized use during your
absence.
Note:
The sub-menus that appear depend on how your extension was administered. Some submenus may not be available.
Issue 1 July 2007 11
Adjusting the brightness or contrast of the display
Adjusting the brightness or contrast of the display
1.
2.
3.
4.
5.
Press the A button.
Press # to continue.
Press * to select Screen.
Press # to scroll to Bright or Contrast.
Press - or + on the volume button to adjust the brightness or contrast.
Changing the ring pattern
1.
2.
3.
4.
Press the A button.
Press # to scroll to Sounds.
Press * to select Sounds.
Press - or + on the volume button to select a ring type.
Note:
You hear each ring type when you select them.
Turning button click sounds on and off
1.
2.
3.
4.
5.
Press the A button.
Press # to scroll to Sounds.
Press * to select Sounds.
Press # to select Next.
Press - or + on the volume button to turn button click sounds on and off.
Turning error tones on or off
1.
2.
3.
4.
5.
Press the A button.
Press # to scroll to Sounds.
Press * to select Sounds.
Press # to scroll to Error Tones.
Press - or + on the volume button to turn error tones on or off.
Turning visual alerting on or off
When the Visual Alerting option is turned on, incoming calls cause the LED in the top right
corner of the phone to flash. You can turn Visual Alerting on or off.
1.
2.
3.
4.
5.
Press the A button.
Press # to continue.
Press * to select Screen.
Press # to scroll to Visual Alert.
Press - or + on the volume button to turn visual alerting on or off.
12 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
About the Avaya Menu
Setting Automatic Gain Control
Automatic Gain Control helps to maintain a constant audio level by automatically
increasing or decreasing the gain depending upon the signal level. For high level signals,
the gain is reduced and for low level signals, the gain is increased.
1.
2.
3.
4.
5.
Press the A button.
Press # to scroll to Advanced.
Press * to select Advanced.
Press # to select AGCHandset or AGCSpeaker.
Press - or + on the volume button to turn automatic gain control on or off.
Changing the language
1.
2.
3.
4.
5.
6.
Press the A button.
Press # to scroll to Advanced.
Press * to select Advanced.
Press # to scroll to Language.
Press * to select Language.
Press # to scroll to the desired language.
Note:
Other languages may be available. Contact your system administrator.
7. Press * to save your selection.
8. Press 4 to confirm or 6 to cancel.
Viewing Network Information
1.
2.
3.
4.
5.
Press the A button.
Press # to scroll to Network Info.
Press * to select Network Info.
Press # to scroll to Audio Info, IP Info, QOS, Interfaces, or Miscellaneous.
Press * to view information for the item you selected.
Issue 1 July 2007 13
Viewing Network Information
14 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
Index
Index
A
F
Advanced Telephone Features
features commonly administered.........
11
Automatic Gain Control
setting............................................ 13
Avaya Menu
about.............................................. 11
brightness or contrast.................... 12
button click sounds........................ 12
changing language........................ 13
error tones..................................... 12
log out.............................................. 8
network information....................... 13
ring pattern.................................... 12
setting automatic gain control........ 13
visual alerts.................................... 12
Feature button LEDs
about................................................ 6
B
Bridged appearances
answering......................................
Bridged appearancess
about..............................................
Bridged Calls
joining............................................
Button Click Sounds
turning on and off...........................
10
10
11
12
C
Call/line appearance button LEDs
about................................................ 6
Conference Calls
about................................................ 9
adding a person on hold.................. 9
dropping the last person................ 10
making............................................. 9
putting a call on hold...................... 10
D
Display
adjusting brightness....................... 12
adjusting contrast.......................... 12
E
Error Tones
turning off....................................... 12
H
Hold...................................................... 9
conference calls............................. 10
I
Icons in telephone display
about................................................ 7
Incoming Calls
answering........................................ 8
transferring...................................... 9
L
Language
changing........................................ 13
LEDs
about................................................ 6
Logging in to your telephone........... 7 , 8
Logging out of your telephone.............. 7
M
Messages
retrieving........................................ 10
Muting Calls.......................................... 9
N
Network Information
viewing........................................... 13
O
Outgoing calls
making a call.................................... 8
making a call on a bridged appearance
....................................................... 11
redialing a number........................... 8
P
Paper Labels
about................................................ 7
R
Redial................................................... 8
Ring Pattern
changing........................................ 12
Issue 1
July 2007
15
Index
S
Shared lines
about.............................................. 10
T
Telephone display icons
about................................................ 7
Transfer................................................ 9
V
Visual Alerts
configuring..................................... 12
Voice mail
logging in....................................... 10
16 Avaya one-X™ Deskphone Value Edition 1603 IP Telephone User Guide
Download PDF
Similar pages
Avaya 5V User's Manual
Quick Reference Guide
Avaya 12xx User's Manual
Avaya 4610SW User's Manual
Avaya 1100 Series IP Deskphones User Guide
Avaya 7100 Digital Deskphone User's Manual