E
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Accessories
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
* The shape of the power
cord plug varies
according to country or
geographic area.
Rechargeable lithium ion
battery (NP-80)
USB-AC adaptor
(AD-C53U)
Power cord
Strap
USB cable
Basic Reference
2
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield of 99.99%. This means that some very small number of pixels
may not light or may remain lit at all times. This is due to the characteristics of the
liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
3
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Camera Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Camera Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Navigation Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Camera Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
❚❙ Getting Started
11
Attach the Camera Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning the Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
❚❙ Using the LCD monitor
11
11
16
17
17
18
19
LCD Monitor Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the LCD Monitor Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
❚❙ Recording Images and Videos
24
Taking Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Zoom Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Focus Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Function Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Record Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
❚❙ Playback
24
24
26
27
28
34
37
46
Viewing in Single Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Thumbnails. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zooming Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting an Image/Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
46
46
48
48
50
51
Contents
❚❙ Using the Setup Menu
62
Setting Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Power Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting LCD Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Date & Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting File Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting TV Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Memory Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
❚❙ Making Connections
62
63
63
63
63
64
64
64
65
66
Connecting the Camera to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Connecting the Camera to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
❚❙ Appendix
70
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About Folder and File Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
70
79
81
83
85
Contents
Using this Manual
Symbols used in this manual are explained below.
NOTE
• This indicates useful information when using your camera.
IMPORTANT!
• This indicates important message that should be read before using the function.
System Requirements
In order to get the most out of your camera, your computer must meet the following
system requirements.
For Windows:
•
•
•
•
•
•
•
Windows XP, Windows Vista, Windows 7
Processor: Pentium II 450MHz or above
Memory: Minimum 512MB RAM (Over 1GB recommended)
HDD space: 200MB or above
24bit color display monitor
Microsoft DirectX 9.0c
USB port
For Macintosh:
•
•
•
•
•
Power Mac G3 or later
Mac OS 10.3.X (X=0-9) - 10.7.2
Memory: 512MB or above
QuickTime player ver. 6.0.3 or above
USB port
6
Camera Views
Front View
1
1 Flash
2 Self-timer LED
3 Lens
4 Microphone
2
3
4
Back View
5 LCD monitor
6 Movie button
6 7 Menu button
OK button/4-way navigation
7 8
control (8, 2, 4, 6)
5
8 9 Playback button
bkFUNC/Delete button
bk 9
Top View
bl
blPOWER button
bmZoom dial
bnShutter button
bn boLED indicator
bm
bo
7
Bottom View
bq
bpBattery/Memory card
br
compartment
bqTripod screw hole
brSpeaker
bp
Left/Right View
bsUSB port
btStrap ring
bs
bt
Camera Control
Your camera is equipped with different buttons/dial for ease of use.
Control
Description
POWER button
Press the POWER button to turn the power on/off.
Shutter button
Press to capture an image.
Zoom dial
In Still image record mode, rotate the zoom dial
counterclockwise to zoom out, clockwise to zoom in.
In Playback mode, rotate to zoom in to magnify image or zoom
out enter 9-image/calendar thumbnails.
Menu button
Press to enter or exit menu/submenu.
FUNC/Delete
button
In Record mode, press to enter function menu.
In Playback mode, press to delete an image or video clip.
Playback button
Press to enable Playback mode or return to Record mode.
Movie button
Press to start/stop recording video.
8
Navigation Control
The 4-way Navigation Control and the OK button allow you to access the various
menus available from the On Screen Display (OSD). You can configure a wide range
of settings to ensure maximum results from your images and videos. Further
functions of these buttons are as follows.
1
2
4
3
No.
Description
1
2
3
4
5
Face Tracking/Rotate
5
Macro
Display
Flash
OK
Button
Description
OK
1)Confirm a selection when using the OSD menus.
2)In Playback movie mode, press to start video playback.
Flash/Right
1)In Record mode, press to scroll through the Flash mode options
(Auto, Red-eye Reduction, Forced On, Slow Sync and Forced
Off).
2)In Playback mode, press to view the next image or video clip.
3)In Playback movie mode, press to Forward video playback.
4)In Menu, press to enter the submenu or to navigate through the
menu selections.
Macro/Left
1)In Record mode, press to scroll through Macro options (Super
Macro, Pan Focus, Infinity and normal).
2)In Playback mode, press to view the previous clip.
3)In Playback movie mode, press to Rewind video playback.
4)In Menu, press to exit a submenu or to navigate through the
menu selections.
9
Button
Description
Up/Face Tracking/
Rotate
1)In Record mode, press to turn the face tracking function on and
off.
2)In Playback movie mode, press to pause/start video playback.
3)In Still image playback mode, press to rotate the image to the
right 90 degrees with each press. This feature is applicable for
still images only.
4)In Menu, press to navigate through the menu and submenu
selections.
Display/Down
1)The LCD monitor can be changed into four different types such
as Basic, Full, None, and Guideline.
2)In Playback movie mode, press to stop video playback.
3)In Menu, press to navigate through the menu and submenu
selections.
Camera Memory
Internal memory
Your camera is equipped with 43.5MB of internal memory. If there is no memory card
inserted in the memory card slot, all image and video clips recorded are automatically
stored in the internal memory.
External storage
Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards
with a maximum capacity of 32GB and SDXC cards with a maximum capacity of
64GB. If there is a storage card inserted in the memory card slot, the camera
automatically saves all image and video clips in the external storage card. The icon
indicates the camera is using memory card.
IMPORTANT!
• Not all cards may be compatible with your camera. When purchasing a card,
please check the card’s specifications and take the camera with you.
10
Getting Started
Attach the Camera Strap
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for
power. Never try to use any other type of battery.
Inserting the Battery
1.
Make sure the power is off before inserting the
battery.
2.
Unlock and open the battery/memory card
compartment at the bottom of the camera.
3.
Insert the battery into the compartment with the
terminal facing inside the camera with correct
orientation as shown.
OK
11
NG
Getting Started
4.
Close and lock the battery/memory card
compartment.
To replace the battery
1.
Unlock and open the battery/
memory card compartment.
With the LCD monitor side of the
camera facing upwards, slide the
stopper in the direction indicated by
the arrow in the illustration. After the
battery pops out, pull it the rest of
the way out of the camera.
2.
Insert a new battery.
Charge the Battery
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
1.
Turn off the camera.
Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER
button to turn off the camera.
12
Getting Started
2.
After connecting the
supplied USB cable to
the USB-AC adaptor,
plug the power cord
into a household
power outlet.
USB cable (included with camera)
USB
USB port
Power cord
Large connector
USB-AC adaptor
3.
Connect the USB
cable to the camera.
The LED indicator
should flash green,
indicating that charging
has started.
The LED indicator will
go out when charging is
complete.
It takes about
150 minutes to achieve
a full charge. Charging
may take longer
depending on charging
conditions.
USB port
USB-AC adaptor
Small
connector
USB cable
(included with camera)
Making sure that the mark on the USB cable connector
is towards the LCD monitor, connect the cable to the
camera.
LED indicator Operation
4.
Indicator Status
Description
Flashing green
Charging
Flashing green, fast
Charging problem (page 77)
Off
Charging complete
LED indicator
After charging is complete, disconnect the USB cable from the camera and
then unplug the power cord from the power outlet.
13
Getting Started
. To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the
camera’s battery over a USB connection. If this happens, use of the USB-AC
adaptor that comes with the camera is recommended.
1.
Turn off the camera.
Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER
button to turn off the camera.
IMPORTANT!
• If you connect the camera to a computer for the first time after you purchase it
while the camera is turned on, the computer will enter a camera recognition
operation. If this happens, perform the procedure on page 67. After the computer
recognizes the camera, turn off the camera.
2.
With your computer turned
on, connect the camera to
it.
USB port
The LED indicator should
flash green, indicating that
charging has started.
The LED indicator will go
out when charging is
complete.
It takes about 150 minutes
to achieve a full charge.
Charging may take longer
depending on charging
conditions.
USB cable
(included with camera)
Large connector
USB port
Small connector
Making sure that the mark on the USB cable
connector is towards the LCD monitor, connect
the cable to the camera.
14
Getting Started
LED indicator Operation
3.
Indicator Status
Description
Flashing green
Charging
Flashing green, fast
Charging problem (page 77)
Off
Charging complete
LED indicator
After charging is complete, disconnect the USB cable from the camera and
then from the computer.
IMPORTANT!
• Charging is not possible if the computer is in a rest or standby state.
• A charging error can occur immediately after charging begins or some time after
charging begins. A charging error is indicated by the LED indicator flashing green
at high speed.
• Leaving the camera for about 48 hours with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
63).
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-80) without removing it from the camera. Never use any other type of
charger device. Attempting to use a different charger can result in unexpected
accident.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm due to normal use may not charge fully. Give the battery
time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the charger into an outlet that is further away from the TV or
radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
15
Getting Started
Inserting a Memory Card
Expand your camera’s storage by using an SD, SDHC or SDXC memory card.
Supported Memory Cards
– SD Memory Card (Up to 4GB)
– SDHC Memory Card (Up to 32GB)
– SDXC Memory Card (Up to 64GB)
Use one of the above types of memory card.
• The above are supported memory card types as of January 2012.
• Noted memory card capacities are standard values.
• Use only SD cards that are compliant with the SD Card Association specification.
To load a memory card
1.
Unlock and open the battery/memory card
compartment at the bottom of the camera.
2.
Insert the memory card into the memory card slot
with the metallic part facing the back (LCD
monitor) side of the camera.
3.
Push the memory card into the memory card slot
until it clicks into place.
4.
Close and lock the battery/memory card
compartment.
To remove the memory card
1.
Unlock and open the battery/memory card compartment.
2.
Gently push the card until it pops out.
3.
Pull out the card carefully.
16
Getting Started
NOTE
• Windows XP does not support SDXC cards (exFAT format). However, with
Windows XP (Service Pack 2 or 3), you can download an exFAT patch update to
enable support for SDXC cards.
Turning the Power On and Off
There are two ways to turn on the camera.
• Press the POWER button, then the startup image displays briefly and the startup
sound plays if enabled. The zoom lens extends and the camera is turned on in
Record mode.
• Hold down the Playback button until the LED indicator lights. This turns on the
camera in the Playback mode. The zoom lens is not extended.
To turn off the camera, press the POWER button.
See “Modes” on page 18 to know more about Record and Playback modes.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial
settings of your camera. First is the setup of language menu. Specify in which
language menus and messages are to be displayed on the LCD monitor.
Setting the Language
1.
Press the 8, 2, 4 or 6 keys to move through the languages.
2.
Select a language, and then press the OK button to apply.
17
Getting Started
Setting the Date & Time
1.
Press the 4 or 6 keys to move through the selection.
2.
Press the 8 or 2 keys to change the value for the date and time.
3.
Press the OK button to apply.
4.
If necessary, press the Menu button to close the menu.
Now, you are ready to start taking images and videos.
NOTE
• Holding down the 8 or 2 keys changes the values continuously.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Modes
Your camera has two modes:
Record Mode
• This is the default mode while you turn on the camera every time. You are able to
take images and record videos in this mode.
Playback mode
• Press the Playback button after the camera is turned on to view and edit captured
images or playback videos.
18
Getting Started
Using the LCD monitor
The LCD monitor shows all important information regarding camera settings as well
as the visual image of your image or video. The display on the LCD monitor is called
the On Screen Display or OSD.
LCD Monitor Layout
. Sill Image Record Mode Screen Layout
No.
Item
Description
1
Record mode
Indicates the current mode.
2
Flash
Indicates flash settings.
3
Self-timer/Burst
Indicates Drive mode settings.
4
Zoom indicator
Displays zoom.
5
Shots remaining
Indicates the remaining shots available.
6
Battery
Indicates battery level.
7
Storage media
Indicates current storage media in use.
8
Movie size
Indicates video size.
9
Date stamp
Indicates date stamp is enabled.
10
AEB
Indicates AEB function is enabled.
11
Stabilizer
Indicates stabilizer function is enabled.
12
Saturation
Displays saturation settings.
13
Contrast
Displays contrast settings.
14
Histogram
Graphic display of Brightness.
15
ISO
Displays ISO settings.
16
Focus area
Indicates focus area.
17
Shutter speed
Displays shutter speed settings.
18
Aperture value
Displays aperture settings.
19
Shake warning
Indicates that the camera is shaking.
20
Focus
Indicates focus is enabled.
19
Using the LCD monitor
No.
Item
Description
21
Exposure
Displays exposure settings.
22
Face tracking
Indicates face tracking is enabled.
23
White balance
Displays white balance settings.
24
Metering
Displays metering settings.
25
Sharpness
Displays sharpness settings.
26
Quality
Displays quality settings.
27
Photo size
Displays photo size settings.
. Video Image Record Mode Screen Layout
Recording layout
No.
Item
Description
1
Key indicator
Displays the commands on 4-way navigation control
button.
2
Recorded time
Displays recorded time.
3
Recording status
Indicates recording status.
NOTE
• The Pre-Record icon appears on the screen in red color as the same position as
zoom indicator.
20
Using the LCD monitor
. Playback Mode Screen Layout
The Playback mode display varies depending on the type of image being viewed.
Playback mode display of still images:
No.
Item
Description
1
Playback mode
Indicates Playback mode.
2
Protect
Indicates file is protected.
3
File no./Total no.
Indicates the file number over the total number of
files in the storage card.
4
Battery
Indicates battery level.
5
Storage media
Indicates used storage memory.
6
Recording
information
Displays recording information of the file.
7
DPOF
Indicates the file is marked for printing.
8
Image size
Displays the image size settings.
21
Using the LCD monitor
Playback mode of videos:
No.
Item
Description
1
Playback mode
Indicates Playback mode.
2
Protect
Indicates file is protected.
3
Video clip
Indicates the file is a video.
4
Button intro
Indicates the button to press on the camera to play a
video file.
5
File no./Total no.
Indicates the file number over the total number of
files in the storage card.
6
Battery
Indicates battery level.
7
Storage media
Indicates used storage memory.
8
Recording date &
time
Displays the date and time of the video clip.
9
Video size
Indicates the size of the video clip.
10
Volume
Indicates the volume while playing.
11
Video length
Display the total length of the video clip.
12
Played time
Indicates the played time of the video.
13
Playing status
Displays playing status.
14
Capture image
Capture the screenshot and save.
22
Using the LCD monitor
Changing the LCD Monitor Display
The type of information displayed on the LCD monitor can be changed using the 2
key. Press the 2 key repeatedly to change the LCD display from one type to another.
In Record mode, the LCD display can be changed into any of the following.
• Basic
• Full
• None
• Guideline
NOTE
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD off
or Guideline is on: AEB, Face tracking, Drive mode, Stabilizer, and Focus.
• Use the “Guide lines” to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following.
• Basic
• Full
• None
NOTE
• LCD display cannot be changed in the following situations.
– Recording video clips
– Playing video clips
– Playing slide show
23
Using the LCD monitor
Recording Images and Videos
Taking Images
Now that you are familiar with your camera, you are now ready to take your images.
Taking images with your camera is very simple.
1.
Turn on the camera by pressing the POWER
button.
2.
Frame the shot using the focus bracket on the
LCD monitor. See illustration on the right.
3.
Pressing the Shutter button down halfway
automatically focuses and adjusts the exposure,
and pressing the Shutter button down fully
captures the images.
Focus bracket
If the shake warning icon
appears, hold the camera steadily, with your arms
at your side or use a tripod to stabilize the camera to prevent blurred images.
Setting the Zoom Dial
Using a combination of 5 times optical zoom and 5 times digital zoom permits zoom
photography at up to 25 times magnification. While the digital zoom can be a useful
feature, the more an image is enlarged (zoomed), the more pixelated (grainier) the
image will appear. Please refer to “Setting the Digital Zoom” on page 44 on how to
setup digital zoom.
To adjusts the optical zoom:
1.
Rotate the Zoom dial to zoom in or zoom out an image.
2.
The zoom indicator appears on the LCD monitor.
24
Recording Images and Videos
. Zoom dial
1.
Rotate the dial clockwise [ (right) to zoom in.
2.
Rotate the dial counterclockwise ] (left) to zoom out.
To adjusts the digital zoom:
1.
Activate digital zoom. See “Setting the Digital Zoom” on page 44.
2.
Rotating the Zoom dial clockwise/counterclockwise optically zooms in/out to
the maximum until it stops.
3.
Release the Zoom dial.
Optical zoom 1x to 5x
Digital zoom 1x to 5x
NOTE
• Zoom operation is not activated in recording videos.
25
Recording Images and Videos
Using Flash
When taking pictures in difficult lighting conditions, use the Flash/Right button to get
correct exposure. This function cannot be activated in recording videos or continuous
shooting.
To activate Flash:
• Press the Flash/Right button on your camera
repeatedly until your desired Flash mode is
displayed on the LCD monitor.
Your camera is equipped with five flash modes.
AUTO. The flash fires automatically whenever
extra lighting is needed.
Flash/Right
button
Auto flash is enabled.
Red-eye reduction. The flash fires twice to
reduce the red-eye effect.
Forced on. The flash fires whenever you press the
Shutter button regardless of lighting conditions.
Slow sync. The flash fires with a slow shutter
speed.
Forced off. The flash is turned off.
NOTE
• The flash function is available only when shooting still images. It is not available for
the Burst and AEB modes.
• The flash does not charge while the Zoom dial is rotated. To enable flash charging,
release the Zoom dial.
26
Recording Images and Videos
Setting the Focus Mode
This function allows users to define the type focus when recording a still image.
To set the Focus mode:
• Press the Macro/Left button repeatedly until the
desired Focus mode icon is displayed on the
lower left corner of the LCD monitor.
Macro/Left
button
Your camera supports the four focus modes.
Normal. With normal focus, the focus range starts from
15 cm (5.9") (Wide Angle). When the camera is set to
Normal mode, there is no icon displayed on the screen.
Super Macro. This mode is designed for close-up
photography.
Pan Focus. The focus of this mode provides
maximum Depth of Field (DOF), not designed for
close-up photography.
Focus enabled
Infinity. When Infinity is set, the camera focuses
on distant objects.
27
Recording Images and Videos
Using the Function Menu
The Function Menu is used to adjust capture settings in Record mode. It contains
My Mode, Aspect Ratio, Photo Size, EV Compensation, White Balance, ISO,
Metering, Color Mode, Movie Size and Pre-record.
Press the FUNC/Delete button of your camera to launch the Function Menu.
Press the FUNC/Delete button again to close the menu.
• The Menu bar displays the current status of your
camera settings. Only the available functions for the
settings are shown as icon on the menu bar.
• The available options for each item on the menu bar
are shown in the Menu options.
• Use the 4 or 6 keys to move through the menu
selections, and then press the OK button to save and
apply changes.
Menu options
Menu bar
My Mode
My Mode shows the available Scene Modes, with the
currently selected Scene Mode highlighted. The icon in
the menu bar changes to the icon of the selected Scene
Mode.
Aspect Ratio
The Aspect Ratio function is used to set the width to
height ratio of an image. Display available remaining
shots in help text synchronously while selecting different
options.
28
Recording Images and Videos
Photo Size
The Photo size function is used to set the resolution
before you capture the image. Changing the Photo Size
affects the number of images that can be stored in your
memory card. The higher the resolution, the more memory space is required.
The table below shows the Photo Size values for still images when selecting Aspect
ratio 4:3.
Icon
Pixel Size
Printing Size Suggestion
4320 x 3240
A2 Size
3264 x 2448
A3 Size
2592 x 1944
A4 Size
2048 x 1536
A5 Size
640 x 480
E-mail
The table below shows the Photo Size values for still images when selecting Aspect
ratio 3:2.
Icon
Pixel Size
Printing Size Suggestion
4320 x 2880
8" x 12"
3264 x 2176
6" x 9"
2592 x 1728
5" x 7"
2048 x 1360
4" x 6"
640 x 424
E-mail
29
Recording Images and Videos
The table below shows the Photo Size values for still images when selecting Aspect
ratio 16:9.
Icon
Pixel Size
Printing Size Suggestion
4320 x 2424
HDTV
3264 x 1832
HDTV
2592 x 1456
HDTV
2048 x 1152
HDTV
640 x 360
E-mail
The table below shows the Photo Size values for still images when selecting Aspect
ratio 1:1.
Icon
Pixel Size
Printing Size Suggestion
3744 x 3744
square-shaped
2832 x 2832
square-shaped
2240 x 2240
square-shaped
1728 x 1728
square-shaped
480 x 480
E-mail
30
Recording Images and Videos
EV Compensation
Images can be captured with the overall scene
intentionally made brighter or darker. These settings are
used when a suitable brightness (exposure) cannot
otherwise be obtained in circumstances where the difference in brightness between
the subject and the background (the contrast) is large, or when the subject that you
wish to capture is very small within the scene. Available for still images only.
• This function is used only in Program mode (page 38).
• To adjust EV settings, press the 4 or 6 keys to increase/decrease the value. As
you adjust the settings, the LCD monitor synchronously displays the image
applying the EV settings. Press the OK button to save and apply changes.
White Balance
This sets the white balance for a variety of lighting
conditions and permits images to be captured that
approach the conditions that are seen by the human eye.
• This function is used only in Program mode (page 38).
• As you move through the selection, you can see the preview on the LCD monitor
synchronously.
Icon
Item
Description
Auto White Balance
The camera automatically adjusts the white
balance.
Daylight
Ideally used for bright sunny conditions.
Cloudy
Ideally used for cloudy conditions.
Tungsten
Ideally used for indoor images with tungsten or
halogen lighting without a flash.
Fluorescent 1
Ideally used for indoor images with bluish
fluorescent lighting conditions.
Fluorescent 2
Ideally used for indoor images with reddish
fluorescent lighting conditions.
31
Recording Images and Videos
Icon
Item
Description
Custom
Used when light source cannot be specified.
Press the Shutter button for the camera to
automatically adjust the appropriate white balance
setting according to the environment.
ISO
This sets the sensitivity for capturing images. When the
sensitivity is raised (and the ISO figure is increased),
photography will become possible even in dark locations,
but the more pixelated (grainier) the image will appear.
• This function is used only in Program mode (page 38).
• Use a higher ISO setting in dim conditions and a lower ISO setting in brighter
conditions.
Metering
This sets the metering method for calculating the
exposure.
Icon
Item
Description
Multi
The entire area of the screen is measured, and the
exposure is calculated.
Center
Averages the light metered from the entire frame, but
gives greater weight to the subject matter at the
center.
Spot
A very small portion of the center of the screen is
measured, and the exposure is calculated.
32
Recording Images and Videos
Color Mode
The Color mode function applies different colors or tones
for a more artistic effect on the still images or videos.
• This function is used only in Program mode (page 38).
• As you move through the selection, the preview on the LCD monitor changes
synchronously.
Icon
Item
Description
Off
The camera records normally.
Vivid
The camera captures the image with more contrast
and saturation emphasizing on the bold colors.
Sepia
Images are captured in sepia tones.
B&W
Images are captured in black and white.
Vivid Red
Captured image becomes reddish. Ideally used to
record images like flowers and cars to make them
more vivid.
Vivid Green
Captured image becomes greenish. Ideally used to
record images like mountains and lawns to make
them more vivid.
Vivid Blue
Captured image becomes bluish. Ideally used to
record images like the sky and the ocean to make
them look more vivid.
33
Recording Images and Videos
Recording Videos
You can record videos with the camera, the available
recording time depends on the capacity of the memory
card. Videos can be recorded until the maximum memory
capacity has been reached. However, the length of a
single video may be limited.
1.
Turn on the camera by pressing the POWER
button.
2.
Focus your camera on the subject that you want to take.
3.
Press the Movie button to start recording.
4.
To pause recording, press the 8 key.
5.
To continue recording, press the 8 key again.
6.
To stop recording, press the Movie button.
NOTE
• When the camera stop recording due to reaching maximum time (29 minutes) for a
single video, simply press the Movie button again to continue recording.
• The camera will automatically stop recording when the memory capacity is full.
• Zoom operation is not available while recording a video.
• Power save mode is not available in video recording or pause recording.
Settings of Recording Videos
Press the FUNC/Delete button to enable video setting menu before recording a
video.
34
Recording Images and Videos
Movie Size
Use this function to adjust the resolution and quality of
video clips.
The table below shows the available size and corresponding image quality settings.
Icon
Item
Description
HDTV
The maximum length of a single video recording is up to
1280 x 720 29 minutes. It will automatically stop recording when the
recording time is over 29 minutes or the file size is over
4GB.
640 x 480
High Quality
The maximum length of a single video recording is 4GB.
It will automatically stop recording when a file size is over
4GB.
320 x 240
Normal
The maximum length of a single video recording is 4GB.
It will automatically stop recording when a file size is over
4GB.
Web
For Internet, see “Internet Mode” on page 36 below.
• Using the camera’s built-in memory or certain types of memory cards can slow
down processing speed. Whenever possible use an Ultra High-Speed Type
memory card. Note, however, that not all operations can be guaranteed even if an
Ultra High-Speed Type memory card is used. Certain movie quality settings can
result in too much time being required to record data, which can result in breaks in
the image and/or audio during playback.
35
Recording Images and Videos
Internet Mode
The Internet mode allows you to record videos with predefined video settings for easy
upload to the Internet website.
Therefore when you record using the Internet Mode, the following standards are
followed:
• Recorded videos are set to Internet standard resolution of 640 x 480.
• Recording automatically stops when the file reaches 1GB.
• Available recording time for Internet Mode is up to 10 minutes.
• Recording a video while
(Web) is selected for the Movie size setting causes a
folder named “100UTUBE” to be created for storage of movie files. This helps to
simplify uploading to YouTube.
Pre-Record
You can catch the first three seconds of action you would
have potentially missed. Once enabled, this function
starts recording video automatically before the Movie
button is pressed. As soon as the Movie button is hit, the most recent three seconds
of video is added to the beginning of the clip.
The Pre-Record icon
is displayed in red while Pre-Record is turned on.
NOTE
• Pre-Record will be canceled in the following situation.
– When you change My Mode to “Program” or switch to Playback mode
– When you turn off power
– When you enter USB mode
36
Recording Images and Videos
Using the Record Menu
If you are in Record mode, you can access the Record menu simply by pressing the
Menu button on your camera.
When the menu is displayed, use the 4-way navigation control and the OK button to
move through menu selections and apply your desired settings. To close the menu
anytime, press the Menu button again.
Record Menu
The Record menu allows you to change modes, and
setup other capture settings.
To go to Record Menu:
Turn on the camera by pressing POWER button.
1.
Press the Menu button to launch the Record
Menu.
2.
Use the 8 or 2 keys to move through the menu
3.
To select an item, press the 6 key or OK button.
4.
Change the submenu settings using the 4-way navigation control.
5.
Press the OK button to save and apply settings.
37
Recording Images and Videos
Setting the Scene Mode
The following two scene modes can be selected to shoot images.
1.
From the Record Menu, press the 6 or OK button to select Scene Mode.
2.
Use the navigation control to move through the selection.
3.
Press the OK button to save and activate the selected Scene mode.
The table below shows the available Scene mode settings.
Icon
Item
Description
Auto
The simplest way to shoot basic images. Settings are
adjusted automatically.
Program
The camera automatically adjusts suitable shooting
settings like shutter speed and aperture values.
The Scene Mode can also be configured using the Function Menu My Mode setting
(page 28).
38
Recording Images and Videos
Setting the Drive Mode
Your camera features a Self-timer and Burst which can be set in the Drive mode
function in the Record menu. The Self-timer allows you to take images after a predefined delay. While burst lets you take consecutive shots. This function is only
available in recording still images. The Drive mode setting is automatically set to off
when you turn off the camera.
To set the Drive Mode
1.
From the Record menu, select Drive Mode.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
The table below shows the available Drive mode settings.
Icon
Item
Description
Off
Captures an image without time delay.
10 Sec.
Sets a 10-second delay to capture image after pressing
the Shutter button.
2 Sec.
Sets a 2-second delay to capture image after pressing
the Shutter button.
Double
Performs delay and capture twice.
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay, and then captures
the image again.
Burst
Performs continuous shooting when the Shutter button
is pressed.
Stops shooting when the Shutter button is released.
39
Recording Images and Videos
Setting the AEB
AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive images in
the order of standard exposure, under exposure and overexposure compensation.
• AEB function is used only in Program mode (page 38).
To set AEB:
1.
From the Record menu, select AEB.
2.
Use the 2 or 8 keys to go through the selection.
3.
Press the OK button to save and apply changes.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the area on which the
camera focuses.
To set AF Area:
1.
From the Record menu, select AF Area.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
The table below shows the available AF area settings.
Icon
Item
Description
Wide
The camera automatically selects focus area within the
wide frame.
Center
The focus area is fixed on the center.
40
Recording Images and Videos
Setting Sharpness
This function allows you to enhance or soften finer details of your images.
To set Sharpness:
1.
From the Record menu, select Sharpness.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
The table below shows the available Sharpness settings.
Icon
Item
Description
High
Sharpens the image.
Normal
Normal sharpness.
Low
Softens the image.
41
Recording Images and Videos
Setting Saturation
The Saturation function lets you adjust the color saturation in your images. Use a
higher saturation setting for rich colors and a lower saturation setting for more natural
tones.
To set Saturation:
1.
From the Record menu, select Saturation.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
The table below shows the available Saturation settings.
Icon
Item
Description
High
Enhance the saturation.
Normal
Normal saturation.
Low
Reduce the saturation.
42
Recording Images and Videos
Setting Contrast
This function allows you to adjust the contrast of your images.
To set Contrast:
1.
From the Record menu, select Contrast.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
Icon
Item
Description
High
Enhance the contrast.
Normal
Normal contrast.
Low
Reduce the contrast.
Setting Quality
The Quality sets the quality (compression) at which the image is captured. The quality
determines the amount of compression applied to your images. Fine quality would
give you the best images with sharper details and less compression. However, the
higher the quality, the more memory space is required in your memory card.
Icon
Item
Description
Superfine
3x compression rate.
Fine
7x compression rate.
Normal
12x compression rate.
43
Recording Images and Videos
Setting the Digital Zoom
This feature controls the Digital zoom mode of your camera.
Your camera enlarges an image using the optical zoom first. When the zoom scale
exceeds 5x, the camera uses digital zoom.
To set Digital Zoom:
1.
From the Record menu, select Digital Zoom.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
The table below shows the available Digital Zoom settings.
Icon
Item
Description
Intelligent
Zoom
Enlarges the image digitally with almost no distortion.
Intelligent Zoom is not supported when the photo size is
14M.
Standard
Zoom
Enlarges all image sizes up to a maximum of 5x in
preview, but the image quality deteriorates.
Off
Uses the optical zoom only.
NOTE
• Zoom operation is not available in Face Tracking on and video image record
modes.
• The maximum Intelligent zoom scale varies depending on the photo size.
44
Recording Images and Videos
Setting the Date Stamp
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured. Once date and time are stamped on an
image, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows.
• Available for still images only.
• May slow down AEB/Burst mode when Date Stamp is enabled in AEB/Burst mode.
• In vertical or rotated images, the date and time on your images still appear
horizontally.
To set Date Stamp:
1.
From the Record menu, select Date Stamp.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
Setting Auto Review
The Auto Review function lets you view the captured image right after shooting it.
If Auto Review is On, the camera will display the captured image for 1 second on the
LCD monitor.
To set Auto Review:
1.
From the Record menu, select Auto Review.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
Setting Stabilizer
This function allows you to prevent blurred images caused by shaking.
1.
From the Record menu, select Stabilizer.
2.
Use the 8 or 2 keys to go through the selection.
3.
Press the OK button to save and apply changes.
45
Recording Images and Videos
Playback
You can playback the still image and video clips on the LCD monitor.
Viewing in Single Navigation
The Single navigation mode displays the images one by one on the LCD monitor. To
view image/video clips, follow the steps below.
1.
Press the Playback button on the camera.
2.
The LCD monitor displays an image. To understand the icons and other
information on the screen, please see “LCD Monitor Layout” on page 19.
Still Image
Video
3.
Use the 4 or 6 keys to view next/previous image/video.
4.
To play a video clip, press the OK button. See “Playing Videos” on page 48
for more details.
Viewing Thumbnails
This function allows you to view 9-thumbnail images or by calendar mode on the LCD
monitor. Searching numerous images is much easier than single view navigation.
To set 9-images mode
1.
Press the Playback button on the camera.
2.
Rotate the Zoom dial counterclockwise (left) once to enter 9-images mode.
3.
Use the navigation control to move through the items.
4.
Press the OK button to select the image and view it normally.
46
Playback
Scroll bar
Scroll bar
If a scroll bar appears, it indicates that the screen can be
scrolled.
Thumbnail view
To set calendar mode:
1.
Press the Playback button on the camera.
2.
Rotate the Zoom dial counterclockwise (left) twice
to view thumbnails in calendar mode.
3.
Use the navigation control to move through the
items.
4.
Press the OK button to select an image and view it normally.
NOTE
• In calendar mode:
– The first file (including image, video, and error file) recorded on each date
appears on the screen.
– Rotate the Zoom dial clockwise (right) would back to 9-images mode.
Thumbnail icon:
When you view the thumbnails, some images may contain icon. The icon indicates
the type of file or recording.
Icon
Type
Description
File Error
Indicates an error file.
47
Playback
Zooming Images
The zoom view function works with still images only.
• In normal view, rotate the Zoom dial clockwise (right)
repeatedly until the desired zoom view.
• The 4 arrows on the LCD monitor indicate that the
image is zoomed in.
• You can zoom to view an image of up to 12x.
• Use the navigation control to view the zoomed image.
• Press the Menu button to close zoom view.
Playing Videos
1.
Press the Playback button on the camera.
2.
Use the navigation control to scroll through the
saved images. A video clip has a video icon
displayed on screen.
3.
Press the OK button to play the video.
4.
During playback, press and hold the 4 or 6 keys to fast forward or rewind
the video. The camera supports forward and rewind speed of up to 4x.
5.
During playback, use the Zoom dial to control volume. Rotate clockwise
(right) to increase volume/Rotate counterclockwise (left) to decrease
volume.
6.
Press the 8 key to pause playback. Press the 8 key again to resume.
When paused, the play info will remain on screen except
.
7.
To forward or rewind the video frame by frame, press the 8 key to pause
playback, then press the 4 or 6 keys.
8.
Press the 2 key to stop the playback. The LCD monitor displays the video
frame image in Single navigation mode.
NOTE
• The play info, except the icon
, will be displayed when the video is paused,
during REW/FF or frame by frame modes.
• Volume cannot be adjusted when paused or during REW/FF modes.
48
Playback
To capture a screenshot image from a video clip
1.
During playback of video, press the 8 key to pause playback on your
desired video frame to capture.
2.
Press the Shutter button to capture a screenshot.
3.
The camera stops playback. The LCD monitor displays the captured image
in Single navigation mode.
NOTE
• This feature does not function when pressing shutter button and “Memory full” or
“Folder cannot be created” message is displayed. The icon
does not appear on
the screen either.
49
Playback
Deleting an Image/Video
There are two ways to delete an image/video.
• Using the FUNC/Delete button.
• Using Playback menu Delete settings. See “Delete” on page 51.
Using the FUNC/Delete Button
Use the FUNC/Delete button on your camera to delete an image/video clip.
1.
Press the Playback button on the camera.
2.
View image/video clips in Single navigation mode.
3.
Use the 4 or 6 keys to scroll the display.
4.
When the desired image/video clip is displayed on the LCD monitor, press
the FUNC/Delete button.
5.
A confirmation selection appears on screen.
6.
Select Delete.
7.
Press the OK button to delete.
8.
The next image is displayed on the LCD monitor. To delete another file, use
the 4 or 6 keys to scroll through the image/video clips. Then, repeat steps 6
to 7.
9.
To close the Delete function and go back to the Single navigation mode,
select Cancel.
NOTE
• Locked files cannot be deleted at any time. When you try to delete a locked file, the
camera displays “File Locked” message on the LCD monitor.
50
Playback
Playback Menu
The Playback menu allows you to edit images and setup playback settings.
To go to Playback Menu:
1.
Press the Playback button on the camera.
2.
Press the Menu button to launch the Playback menu.
3.
Use the 8 or 2 keys to move through the menu selections.
4.
To select a menu, press 6 or the OK button.
5.
Change the submenu settings using the 4-way navigation control.
6.
Press the OK button to save and apply settings.
Delete
The Delete function allows you to remove unwanted files in the internal memory or on
the memory card. Protected files cannot be erased, to delete, unprotect the file first.
See “Protect” on page 54.
To delete an image/video clip:
1.
From the Playback menu, select Delete.
2.
The Delete submenu is displayed on the LCD monitor. Select an available
setting.
• Single: Select one file to delete.
• Multi: Select multiple files to delete at the same time.
• All: Delete all files.
To delete a single file:
1.
Select Single in the Delete submenu, the images are displayed on the LCD
monitor in Single navigation mode.
2.
Use the 4 or 6 keys to scroll the display.
3.
When the desired image/video clip is displayed on the LCD monitor, select
Delete.
4.
Press the OK button to delete.
51
Playback
5.
The next image is displayed on the LCD monitor. To delete another file, use
the 4 or 6 keys to scroll through the image/video clips. Repeat steps 3 to 4.
6.
To close the Delete function and go back Playback menu, select Cancel.
To delete multiple files:
1.
Select Multi in the Delete submenu, the images
are displayed in thumbnail view on the LCD
monitor.
2.
Use the navigation control to move through the
files.
3.
When the desired image/video clip is highlighted, press the OK button to
mark image/video clip for deletion.
4.
Repeat step 3 until all desired images for deletion are marked.
5.
Press the Menu button. A confirmation selection appears.
6.
Select Yes to confirm.
7.
Press the OK button to delete marked files.
To delete all files:
1.
Select All in the Delete submenu. A confirmation message appears.
2.
Select Yes.
3.
Press the OK button to delete all files.
52
Playback
Slide Show
The slide show function enables you to playback your still images automatically in
order one image at a time.
To view slide show:
1.
From the Playback menu, select Slide Show. The slide show menu
appears.
2.
Set the slide show settings.
3.
Select Start, then press the OK button to start the slide show.
4.
During slideshow, press the OK button to pause slide show.
5.
Use the 8 or 2 keys to move through the options. Select whether to
Continue or Exit the slide show.
6.
Press the OK button to apply selected option.
To change slide show settings:
1.
From the Slide show menu, use the 8 or 2 keys to move through the
selections.
2.
Select Interval setting. Press the 4 or 6 keys to adjust. Choose among the
available interval settings: 1 sec., 3 sec., 5 sec., and 10 sec.
3.
Select Transition setting. Press the 4 or 6 keys to adjust. Choose among
the available transition settings.
4.
Select Repeat setting. Press the 4 or 6 keys to adjust. Available settings
are: Yes, No.
53
Playback
Protect
Set the data to read-only to prevent images from being erased by mistake.
A protected file has a lock icon
when viewed on Playback mode.
To protect files:
1.
From the Playback menu, select Protect.
2.
The Protect submenu is displayed on the LCD monitor.
Select an available setting.
• Single: Select one file to lock/unlock.
• Multi: Select multiple files from the thumbnail view to lock/unlock.
• Lock all: Lock all files.
• Unlock all: Unlock all files.
To protect/unprotect a single file:
1.
Select Single in the Protect submenu, the images are displayed on the LCD
monitor in Single navigation mode.
2.
Use the 4 or 6 keys to scroll the display.
3.
When the desired file is displayed on the LCD monitor, press the OK button
to select Lock/Unlock.
4.
To close the protect/unprotect function and go back Playback menu, select
Exit.
54
Playback
To protect/unprotect multiple files:
1.
Select Multi in the Protect submenu, the images are displayed in thumbnail
view on the LCD monitor.
2.
Use the navigation control to move through the files.
3.
When the desired file is highlighted, press the OK button to mark/unmark the
file clip for protection.
4.
Repeat step 3 until all desired files to protect are marked.
5.
Press the Menu button. A confirmation selection appears.
6.
Select Yes.
7.
Press the OK button to lock files and go back to Playback mode.
To protect all files:
1.
Select Lock all in the Protect submenu. A confirmation message appears.
2.
Select Yes.
3.
Press the OK button to lock all files.
To unlock all files:
1.
Select Unlock all in the Protect submenu. A confirmation message appears.
2.
Select Yes.
3.
Press the OK button to unlock all protected files.
55
Playback
Color Mode
The Color mode function lets you edit still images to apply different colors or tones for
a more artistic effect. Edited images in this function are saved as a new file.
To activate Color Mode:
1.
Press the Playback button on the camera.
2.
Press the 4 or 6 keys to scroll and select an image to edit.
3.
Press the Menu button to launch the Playback menu.
4.
Select Color Mode. The Color mode submenu appears.
5.
Press the 4 or 6 keys to scroll and select an option. As you move through
the selection, the preview on the LCD monitor changes synchronously.
The succeeding table shows the available settings.
Icon
Item
Description
Off
No effect is added to the image.
Sepia
Image is saved with a sepia tone.
B&W
Image is saved in black and white.
Vivid Red
Image is saved with reddish tint.
Vivid Green
Image is saved with greenish tint.
Vivid Blue
Image is saved with bluish tint.
56
Playback
Effect
The Effect function is only applicable to still images with different artistic effect. Edited
images in this function are saved as a new file.
To activate Effect:
1.
Press the Playback button on the camera.
2.
Press the 4 or 6 keys to scroll and select an image to edit.
3.
Press the MENU button to launch the Playback menu.
4.
Select Effect. The Effect submenu appears.
5.
Press the 4 or 6 keys to scroll and select an option. As you move through
the selection, the preview on the LCD monitor changes synchronously.
The succeeding table shows the available settings.
Icon
Item
Description
Off
No effect is added to the image.
Negative
Image appears to be the opposite of the original image.
Mosaic
Image is saved with mosaic tiles.
NOTE
• Every time when launching the submenu, the cursor is located on “Off”.
57
Playback
Trim
The Trim function allows you to trim an image to another image size. This function is
only available for still images.
To trim an image:
1.
Press the Playback button on the camera.
2.
Use the 4 or 6 keys to scroll and select an image to trim.
3.
Press the Menu button to launch the Playback menu.
4.
Select Trim. The Trim screen layout is displayed on the LCD monitor.
5.
Use the Zoom dial to change size as zoom in/out.
No.
1
Description
Enlarged image
2
4-way indicator
3
Trimmed size
4
The approximate location of the trimmed
area
5
Image area
6.
Use the navigation control to move the image.
7.
Press the OK button to apply changes. A menu selection appears.
8.
Select an available setting.
• Overwrite: Save and replace the old file with the new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel Trim.
9.
Press the OK button to save/cancel changes.
NOTE
• Trim function is not available for images with image size set to VGA.
• All images will be trimmed in 4:3 ratio regardless of its original image ratio.
58
Playback
Resize
Resizes a previously saved image and only resizing to a smaller size is available.
To resize an image:
1.
Press the Playback button on the camera.
2.
Use the 4 or 6 keys to scroll and select an image to resize.
3.
Press the Menu button to launch the Playback menu.
4.
Select Resize. The Resize submenu is displayed on the LCD monitor.
5.
Select size among: 8M, 5M, 3M, and VGA. Available size settings may vary
depending on original image size. Unavailable settings appear as gray icons
in Resize submenu.
6.
After selecting size, a menu selection appears. Select an available setting.
• Overwrite: Save and replace old file with a new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel resize.
7.
Press the OK button to save/cancel changes.
NOTE
• Resize function is not available for images with image size set to VGA.
59
Playback
Startup Image
You can specify the startup image from the captured images for camera.
1.
Press the Menu button to launch the Playback menu.
2.
Select Startup Image. The menu selection appears.
3.
Select an available setting.
• System: Use camera default image.
• My Photo: Use the 4 or 6 keys to scroll and select desired image.
• Off: Disable the startup image.
4.
Press the OK button to apply changes.
NOTE
• The startup image will still be displayed at startup even if the selected image was
deleted.
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed
printing information on your memory card. You can select the images to be printed
and how many prints to make with the DPOF menu in the camera and insert the
memory card to the card compatible printer. When the printer starts printing, it will
read the embedded information on the memory card and print the specified images.
To set DPOF:
1.
Press the Menu button to launch the Playback menu.
2.
Select DPOF. The submenu appears. Available settings are as follows.
• Single: Select a single image to mark.
• All: Mark all images in the memory card.
• Reset: Reset all DPOF settings to initial default settings.
60
Playback
To set DPOF on a single image/all images:
1.
Select Single or All on the DPOF submenu.
2.
For single image, use the 4 or 6 keys to scroll and select an image to mark
for printing.
3.
Specify the number of copies. Use the 2 or 8
keys to increase/decrease number.
4.
Press the FUNC/Delete button to toggle between
turning on/off the date stamp.
5.
Press the OK button to save DPOF settings.
To reset DPOF:
1.
Select Reset on the DPOF submenu. A confirmation message appears.
2.
Select Yes.
3.
Press the OK button to reset DPOF settings.
Radial Blur
Radial Blur blurs the area around a point.
To set Radial blur for an image:
1.
Press the Menu button to launch the Playback menu.
2.
Select Radial Blur. The menu selection appears.
3.
Use the 2 or 8 keys to specify the level of blurs. Changing the level setting
causes the radial blur in the image on the LCD monitor to change
accordingly.
4.
Press the OK button to proceed save options.
5.
Available settings are as follows.
• Overwrite: Save and replace the old file with a new one.
• Save As: Save the new file as a new one.
• Cancel: Cancel Radial blur.
61
Playback
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows you to configure general camera settings.
To go to Setup menu:
1.
Press the Menu button to launch the Record/Playback menu.
2.
Use the 4 or 6 keys to switch the menu tab to Setup menu.
3.
Use the 2 or 8 keys to move through the menu selections.
4.
To select an item, press the OK button or 6 key.
5.
Change the submenu settings using the 4-way navigation control.
6.
Press the OK button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1.
From the Setup menu, select Sounds.
2.
Adjusts sound settings.
3.
Press the OK button to apply changes.
Item
Available Settings Description
Startup
Sound 1, Sound 2,
Sound 3, Off
Selects the startup sound when camera is
turned on.
Shutter
On, Off
Enables or disables shutter sound when the
Shutter button is pressed. Shutter sound is
not available when recording videos.
Beep volume 0-4
Adjusts volume.
62
Using the Setup Menu
Setting Power Save
The Power Save function allows you to set an idle time after which the camera
automatically sets to sleep mode to save power. After a minute of being in sleep
mode, the camera eventually turns off power.
This function is not available in the following instances:
• Recording a video file
• Playing a slide show/video file
• Using the USB connector
Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD brightness to
conserve battery power. When the camera is idle for 20 seconds, the LCD darkens.
Press any button to resume to normal brightness.
• The camera is idle and enters LCD Save mode when no buttons are pressed. LCD
Save, though enabled, does not function during video playback, slide show and
video recording.
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is
useful in attaching date stamps on captured images. Your camera uses a 24-hour
time format.
1.
Use the navigation control to adjust date and time value. By holding down
the 2 or 8 keys, the numeric values changes continuously.
2.
Press the OK button to apply changes.
Setting Language
Specify in which language menus and messages are to be displayed on the LCD
monitor.
1.
Use the navigation control to scroll through the list and select the desired
language.
2.
Press the OK button to confirm and apply settings.
63
Using the Setup Menu
Setting File Numbering
This function allows you to select a method to assign file numbers to images.
Available settings are:
• Series: Assigns numbers to files in sequence even if the folder is changed.
• Reset: The file numbering will start from 0001 each time a folder is changed or the
memory is formatted.
To understand folder and file structure of your camera, see “About Folder and File
Names” on page 79.
Setting TV Out
Use the TV Out function to adjust video output signal to accommodate different
regional settings. If TV out is not set correctly, the image may not display properly on
TV.
Available settings are:
• NTSC: Applicable in USA, Canada, and others.
• PAL: Applicable in Europe, Asia (excluding Taiwan), Oceania and others.
Setting Memory Kit
This utility formats the internal memory (or memory card) and erases all stored
images and data.
Available settings are:
• Format: Select to format currently used memory.
• Copy to Card: Select to copy all files stored in the internal memory to the memory
card.
NOTE
• If images were saved to internal memory before inserting a memory card into the
camera, you can use Copy to Card function to copy all images from the internal
memory to the memory card.
• If a memory card has not been inserted into the camera or the memory card is
locked or the internal memory is empty, Copy to Card function is not available.
64
Using the Setup Menu
Reset All
Use this function to reset the camera to its factory settings. However, the following
settings are exceptions and not affected by Reset.
• Date & Time
• Language
• TV Out
• Custom White Balance data
65
Using the Setup Menu
Making Connections
You can connect your camera to: TV or computer.
Connecting the Camera to a TV
You can play back your images on a TV screen. Before connecting to any video
devices, make sure to select NTSC/PAL to match the broadcast standard of the video
equipment you are going to connect to the camera.
• As an AV cable, use the separately sold EMC-7A.
To connect your camera to a TV:
1.
Turn on the camera.
2.
Set the TV out to match the TV’s
video out format. See “Setting TV
Out” on page 64.
3.
Connect the AV cable to the USB port
on the side of your camera.
4.
Connect the other end of the cable to
the TV’s AV input port.
5.
Optional AV cable (EMC-7A)
The LCD monitor turns black and all
images and video clips are displayed
on the TV.
66
Making Connections
Connecting the Camera to a Computer
You can transfer images and videos to your computer.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
1.
Connect one end of the USB cable to
an available USB port on your
computer.
USB cable
(included with camera)
2.
Connect the other end of the USB
cable to the USB port on the side of
your camera.
3.
Turn on the camera.
4.
The computer starts to detect the
connection while the LCD monitor
appears “Connecting...”.
5.
Connection established after PC Mode appeared on the LCD monitor.
6.
Access the files in the camera by your computer.
NOTE
• The camera’s internal memory and memory card would display as removable
drives in computer.
• After the connection, no image is displayed on the LCD monitor.
67
Making Connections
. Saving the Files to Your Computer
• Windows
1.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
2.
Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
3.
Right-click the “DCIM” folder.
4.
On the shortcut menu that appears, click “Copy”.
5.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 7, Windows
Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you
want to keep the existing “DCIM” folder, you need to change its name or move
it to a different location before performing the next step.
6.
Windows 7 users: On the “Documents” “Organize” menu, select “Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select “Paste”.
Windows XP users: On the “My Documents” “Edit” menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” (Windows 7, Windows Vista) or “My Documents” (Windows XP)
folder. You now have a copy of the files that are in camera memory on your
computer.
7.
After you finish copying images, disconnect the camera from the computer.
On the camera, press the POWER button to turn off the camera. Then,
disconnect the camera from the computer.
68
Making Connections
• Macintosh
1.
Double-click the camera’s drive icon.
2.
Drag the “DCIM” folder to the folder to which you want to copy it.
3.
After the copy operation is complete, drag the drive icon to Trash.
4.
On the camera, press the POWER button to turn off the camera. Then,
disconnect the camera from the computer.
. To view images you copied to your computer
• Windows
1.
Double-click the copied “DCIM” folder to open it.
2.
Double-click the folder that contains the images you want to view.
3.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 80.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
• Macintosh
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 80.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
69
Making Connections
Appendix
Precautions during Use
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
. Flash
• Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
. Monitor Screen
• Should the monitor screen ever become cracked, never touch any of the liquid
inside the monitor screen. Doing so creates the risk of skin inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse your
mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
. Connections
• Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
. Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
70
Appendix
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn
injury.
3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
71
Appendix
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
. Rechargeable Battery
• Use only the USB-AC adaptor (AD-C53U) or the specified device to charge the
battery. Attempting to charge the battery by an unauthorized means creates the
risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration of its performance and loss of service
life.
• The battery is intended for use with a CASIO Digital Camera only. Use with any
other device creates the risk of the battery damage, or deterioration of battery
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
72
Appendix
• Should you ever notice leakage, strange odor, heat generation, discoloration,
deformation, or any other abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera and keep it away from open flame.
• Do not use or leave the battery under direct sunlight, in an automobile parked in the
sun, or in any other area subject to high temperatures. Doing so can damage the
battery, and cause deterioration of its performance and loss of service life.
• If battery charging does not end normally within the specified charging time, stop
charging anyway and contact your local CASIO authorized service center.
Continued charging creates the risk of battery overheating, fire, and explosion.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
• Be sure to read the user documentation that comes with the camera and special
USB-AC adaptor before using or charging the battery.
• If a battery is to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle the battery correctly.
• Should fluid from a battery accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
. Battery Life
• Battery continuous operation times provided in this manual represent the
approximate amount of time before the camera turns off due to low battery power
when being powered by the special battery under normal temperature (23°C
(73°F)). They do not guarantee that you will be able to achieve the indicated level
of operation. Actual battery life is greatly affected by ambient temperature, battery
storage conditions, the amount of time spent in storage, etc.
• Leaving the camera on can run down the battery and cause the low battery
warning to appear. Turn off the camera whenever you are not using it.
• The low battery warning indicates that the camera is about to turn off due to low
battery power. Charge the battery as soon as possible. Leaving a low or dead
battery in the camera can lead to battery leakage and data corruption.
73
Appendix
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the LED indicator is lighting green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Shooting with a battery that quickly goes low right after it is charged
* Shooting with a battery that quickly goes low right after it is charged can also
cause camera malfunction. Replace the battery with a new one immediately.
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 81). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near an air conditioner or in other areas subjected to extreme temperature or
humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
74
Appendix
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. USB-AC adaptor Handling Precautions
-
0 Never plug the power cord into an outlet whose voltage rating is different from
that marked on the power cord. Doing so creates the risk of fire, malfunction,
and electric shock.
0 Take care to protect the power cord against damage and breaking. Never place
heavy objects onto the power cord, or expose it to intense heat. Doing so can
damage the power cord, creating the risk of fire and electric shock.
0 Never try to modify the power cord, or subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire, malfunction, and electric shock.
0 Never plug in or unplug the power cord while your hands are wet. Doing so
creates the risk of electric shock.
0 Do not plug the power cord into an outlet or extension cord that is shared by
other devices. Doing so creates the risk of fire, malfunction, and electric shock.
0 Should the power cord ever become damaged (to the point that internal wires
are exposed or cut), immediately contact your original retailer or a CASIO
authorized service center to request repair. Continued use of a damaged power
cord creates the risk of fire, malfunction, and electric shock.
• The USB-AC adaptor becomes slightly warm during charging. This is normal and
does not indicate malfunction.
• Unplug the power cord from the power outlet when you are not using the USB-AC
adaptor.
• Never use detergent to clean the power cord (especially the plug).
• Never cover the USB-AC adaptor with a blanket, etc. Doing so creates the risk of
fire.
75
Appendix
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
. Copyrights
Except for your own personal enjoyment, unauthorized use of use of snapshots or
movies of images whose rights belong to others, without the permission of the right
holder, is forbidden by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your
own personal enjoyment. Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site, or any other Internet
site, or otherwise distributing them to third parties without the permission of the
copyright holder is strictly prohibited by copyright laws and international treaties. For
example, uploading or distributing on the Internet images of TV programs, live
concerts, music videos, etc. that were photographed or recorded by you may infringe
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held
liable for use of this product in any way that infringes on the copyrights of others or
that violates copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not use within the text of this
manual.
• SDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Windows Vista, Windows 7, and DirectX are registered
trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Any and all unauthorized copying, distribution, and transfer for commercial purposes
of the software provided by CASIO for this product are prohibited.
76
Appendix
Charging Precautions
. If the camera’s LED indicator starts flashing green at high speed...
• Ambient temperature or the temperature of the battery may be either too high or
too low. Disconnect the USB cable and wait until temperature is within the
allowable charging range before trying again.
• Battery contacts may be dirty. Wipe them with a dry cloth.
• Try connecting to a different computer USB port. Depending on the setup of your
computer, you may not be able to charge the camera’s battery over a USB
connection.
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 10°C to
35°C (50°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
77
Appendix
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power cord plug depends on each country or geographic area. Before taking the
camera and USB-AC adaptor along on a trip, check with travel agent about the
power supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-80) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Memory Card Precautions
. Using a Memory Card
Write enabled
• SD memory cards, SDHC memory cards, and SDXC
memory cards have a write protect switch. Use the
switch when you need to guard against accidentally
deleting data. Note, however, if you write protect an
Write disabled
SD memory card you must then turn write protection
off whenever you want to record to it, format it, or
delete any of its images.
• If a memory card starts to behave abnormally during image playback, you can
restore normal operation by reformatting it (page 64). However, it is recommended
that you always take along multiple memory cards whenever using the camera far
away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
78
Appendix
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 65) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
About Folder and File Names
Your camera automatically creates specific directory of folders in the internal memory
(or memory card) to organize captured images and videos.
File Naming
File names begin with “CIMG” and followed by a 4-digit number that increases in
sequence. File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and the highest file number exceeds 9999, the
camera will display the warning message “Folder cannot be created”. When this
happens, try one of the following ways:
• Reset the file number. See “Setting File Numbering” on page 64.
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
79
Appendix
. Memory Folder Structure
101CASIO
CIMG0001.JPG
CIMG0002.AVI
DCIM Folder
Recording Folder
Image File
Movie File
102CASIO
103CASIO
Recording Folder
Recording Folder
DCIM
MISC
AUTPRINT.MRK
DPOF File Folder
DPOF File
• Recording a video while
(Web) is selected for the Movie size setting causes a
folder named “100UTUBE” to be created for storage of movie files. This helps to
simplify uploading to YouTube.
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM copies of
the DCIM folders it to change its name to a date or something similar after you copy
it to your computer. If you later decided to return the folder to the camera, however,
be sure to change its name back to DCIM. The camera is designed to recognize
only a root file with the name DCIM. Note the camera also will not be able to
recognize the folders inside the DCIM folder unless they have the names they
originally had when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 80 in order for the camera to be able to recognize them correctly.
• You also can use a computer card adapter or a memory card reader/writer to
access camera files directly from the camera’s memory card.
NOTE
• Do not change the folder and file names in the memory card using your computer.
It may be unable to playback the data using the camera.
80
Appendix
Troubleshooting
Problem
Cause and/or Action
Camera does not turn on.
The battery may be exhausted. Charge or replace
the battery.
Camera turns off
automatically.
Press the POWER button to turn on the camera.
LCD turns dark.
Press any button except the POWER button to turn
on the LCD.
Empty battery icon is
displayed on the LCD, then
the camera turns off.
Battery is exhausted, please replace or recharge.
LCD monitor displays
“No image”.
There is no image file in the memory card. Image
file format may not be supported.
LCD monitor displays
“Not available for this file”.
Function is only available for specific file types. File
format is not supported.
LCD monitor displays
“Memory full”.
Memory card is full. Replace the memory card with
a new one or delete unnecessary images.
LCD monitor displays
“File locked”.
This file is locked. Unlock the file. See “Protect” on
page 54.
LCD monitor displays
“Card locked”.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlock
position.
LCD monitor displays
“Format error”.
The card may be damaged. You can either change
the card or wipe to clean the connected points.
LCD monitor displays
“Copy error”.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlock
position.
The memory card is full. Replace card or delete
unnecessary files.
No image displays on the
TV screen.
Incorrect TV-out type was selected. Set the correct
TV-out type to match your TV system.
81
Appendix
Problem
Cause and/or Action
The lens is stuck.
Do not force the lens to go back.
The type of the battery used may be incorrect or the
battery power level is too low. Change the battery or
charge the battery before using the camera.
LCD monitor Displays
“Auto Shutdown”.
The camera’s protection function may have
activated because camera temperature is too high.
Turn off the camera and wait until it cools down
before trying to use it again.
82
Appendix
Number of Snapshots/Movie Recording Time
Snapshot (Aspect ratio 4:3)
SD Memory Card*2
Recording Capacity
Image
Quality
14M
(4320x3240)
Superfine
5.19MB
7
2669
Fine
3.35MB
11
4225
Normal
2.11MB
17
6310
8M
(3264x2448)
Superfine
3.12MB
12
4627
Fine
1.82MB
20
7252
Normal
1.26MB
30
10798
5M
(2592x1944)
Superfine
2.13MB
20
7252
Fine
1.2MB
31
11300
Normal
816KB
46
16755
3M
(2048x1536)
Superfine
1.26MB
31
11300
VGA
(640x480)
Approximate
Image File Size
Built-in Memory*1
Recording Capacity
Image Size
(Pixels)
Fine
762KB
49
17354
Normal
639KB
60
21126
Superfine
183KB
183
60739
Fine
147KB
211
69416
Normal
131KB
249
80986
83
Appendix
Movies
Image
Quality
(pixels)
Maximum
File Size
Approximate
Data Rate
(Frame Rate)
Built-in
Memory*1
Recording
Capacity
SD Memory
Card*2
Recording
Capacity
File Size
of
1-minute
Movie
16:9
(1280x720)
Maximum
Movie Size:
4 GB (or
29 minutes)
8Mbps
(30 Frame)
24 seconds*3
29 minutes
107MB
8Mbps
(30 Frame)
36 seconds
53 minutes
5 seconds
72.5MB
4Mbps
(30 Frame)
1 minute
9 seconds
1 hour
43 minutes
1 second
37MB
8Mbps
(30 Frame)
36 seconds
10 minutes
71.6MB
640
(640x480)
320
(320x240)
Web
(640x480)
Maximum
Movie Size:
4 GB
Maximum
Movie Size:
1 GB (or
10 minutes)
*1 Built-in memory capacity after formatting (Approx. 43.5MB)
*2 Based on a 16GB SDHC memory card (SanDisk Corporation). The number of images
you can save depends on the type of memory card you are using.
*3 The data transfer rate of built-in memory is not sufficient for 16:9 video. Whenever
possible use an Ultra High-Speed Type memory card.
• Snapshot and video recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 16GB.
84
Appendix
Specifications
File Format
Snapshots:
JPEG (Exif Version 2.3); DPOF compliant
Movies:
Motion JPEG AVI, PCM audio (monaural)
Recording Media
Built-in Memory (Image Storage Area: 43.5MB)
SD/SDHC/SDXC
* Built-in memory capacity after formatting
Recorded Image Sizes Snapshot:
Aspect ratio 4:3
14M (4320x3240), 8M (3264x2448), 5M (2592x1944),
3M (2048x1536), VGA (640x480)
Aspect ratio 3:2
14M (4320x2880), 8M (3264x2176), 5M (2592x1728),
3M (2048x1360), VGA (640x424)
Aspect ratio 16:9
14M (4320x2424), 8M (3264x1832), 5M (2592x1456),
3M (2048x1152), VGA (640x360)
Aspect ratio 1:1
14M (3744x3744), 8M (2832x2832), 5M (2240x2240),
3M (1728x1728), VGA (480x480)
Movie:
16:9 (1280x720), 640 (640x480), 320 (320x240),
Web (640x480)
Effective Pixels
14.10 Megapixels
Imaging Element
Size: 1/2.3-inch square pixel CCD
Total Pixels: 14.53 Megapixels
Lens/Focal Distance
F2.8 (W) – F6.5 (T) / f= 4.7 to 23.5 mm
(equivalent to 26 to 130 mm in 35 mm format)
Zoom
5x optical zoom, 5x digital zoom
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Normal, Super Macro, Pan Focus, Infinity
• AF Area: Wide/Center
Approximate Focus
(Snapshot/video)
(From Lens Surface)
Normal:
15 cm to 9 (5.9" to 9) (Wide Angle)
60 cm to 9 (23.6" to 9) (Telephoto)
Super Macro: 5 cm to 50 cm (2.0" to 19.9")
Infinity: 9
Metering
Multi-pattern, center weighted, and spot
Exposure Control
Auto, Program AE
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter
CCD shutter, mechanical shutter
Shutter Speed
Snapshot (Auto): 1 to 1/2000 second
85
Appendix
Aperture Value
F2.8 (W) to F7.9 (W) (When used with ND filter)
White Balance
Auto, Daylight, Cloudy, Tungsten, Fluorescent 1, Fluorescent 2,
Custom
Sensitivity (Standard
Output Sensitivity)
Snapshots:
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600
Movies: Auto
Flash Modes
Auto, Red-eye Reduction, Forced On, Slow Sync, Forced Off
Flash Range
Wide Angle: 0.5 m to 1.5 m (1.6' to 4.9')
(ISO Sensitivity: Auto) Telephoto: 0.6 m to 1 m (2.0' to 3.3')
Flash Charging Time
Approximately 5 seconds maximum
Monitor Screen
2.7-inch TFT color LCD
230,400 (960x240) dots
External connection
terminal
USB port (Hi-Speed USB compatible, USB charging) /
AV output terminal (NTSC/PAL)
Microphone
Monaural
Speaker
Monaural
Power Requirements
Rechargeable lithium ion battery (NP-80) x1
86
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots (CIPA) (Operating Time)*1
Continuous Playback
(Snapshots)*2
190 shots
5 hours
Approximate continuous video recording time*3
1 hour 20 minutes
• Battery: NP-80 (Rated Capacity: 700 mAh)
• Recording Medium: 16GB SDHC memory card (SanDisk Corporation)
• Measurement Conditions
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA (Camera and Imaging Products Association) standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide
and full telephoto every 30 seconds, during which two images are shot with flash;
power turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every
10 seconds
*3 Approximate time for a repeated cycle of 10 minutes recording followed by
deletion of the recorded file.
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on
greatly affects recording time and number of shots values.
Power Consumption 3.7 V DC, Approximately 2.9 W
Dimensions
99.6 (W) x 57.6 (H) x 23.6 (D) mm
(3.9" (W) x 2.3" (H) x 0.93" (D))
Weight
Approximately 130g (4.6 oz)
(including battery and memory card*)
Approximately 113g (4.0 oz) (excluding battery and memory card)
* 16GB SDHC memory card (SanDisk Corporation)
87
Appendix
. Rechargeable lithium ion battery (NP-80)
Rated Voltage
3.7 V
Rated Capacitance
700 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
Dimensions
31.4 (W) x 39.5 (H) x 5.9 (D) mm
(1.24" (W) x 1.56" (H) x 0.23" (D))
Weight
Approximately 15g (0.53 oz)
. USB-AC adaptor (AD-C53U)
Input Power
100 to 240 V AC, 50/60 Hz, 100 mA
Output Power
5.0 V DC, 650 mA
Operating Temperature 5 to 35°C (41 to 95°F)
Requirements
Dimensions
53 (W) x 21 (H) x 45 (D) mm
(2.1" (W) x 0.83" (H) x1.8" (D)) (excluding projections)
Weight
Approximately 37g (1.3 oz)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
88
Appendix
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1203-A
2012