Clarion DXZ866MP Owner's Manual

Owner’s manual
DXZ866MP
CD/MP3/WMA Receiver / CeNET & Touch Panel Control
CD/MP3/WMA接收器/ CeNET及触控面板控制
CD/MP3/WMA 리시버 / CeNET & 터치패널 컨트롤
Clarion Co., Ltd.
2006/1 (Abe·Abe)
All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.
PE-2697K
280-8350-00
English
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this unit.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the
CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations for
operating them are described.
Contents
1. FEATURES ..................................................................................................................................... 2
2. PRECAUTIONS ............................................................................................................................. 3
Sloping Console .............................................................................................................................. 4
Handling Compact Discs ................................................................................................................ 4
3. CONTROLS .................................................................................................................................... 5
4. NOMENCLATURE ......................................................................................................................... 6
Names of the Buttons and their Functions ..................................................................................... 6
Operations when External Equipment is Connected to this Unit ..................................................... 7
Touch Panel Buttons ....................................................................................................................... 8
Touch Panel Operations .................................................................................................................. 9
5. DCP .............................................................................................................................................. 10
6. REMOTE CONTROL ..................................................................................................................... 11
Inserting the Battery ....................................................................................................................... 11
Functions of Remote Control Unit Buttons ................................................................................... 12
7. OPERATIONS ............................................................................................................................... 13
Basic Operations .......................................................................................................................... 13
Radio Operations ........................................................................................................................... 16
CD/MP3/WMA Operations ............................................................................................................ 19
Sound Adjustment ......................................................................................................................... 24
Common Operations ..................................................................................................................... 27
8. OPERATIONS OF ACCESSORIES ............................................................................................. 35
CD Changer Operations ............................................................................................................... 35
TV Operations .............................................................................................................................. 38
9. IN CASE OF DIFFICULTY ........................................................................................................... 41
10. ERROR DISPLAYS ....................................................................................................................... 43
11. SPECIFICATIONS ......................................................................................................................... 44
1. FEATURES
• "Optimedia" : 256 full colour 4.2 inch TFT display & Touch panel control
• "ADF (Anti Distortion Filter)" & 2 band parametric equalizer
• Motorised sloping console with blue illumination face plate
2
DXZ866MP
DXZ866MP
280-8350-00
280-8350-00
133
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc or the
optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about 1 hour.
The condensation will disappear naturally
allowing normal operation.
2. Driving on extremely bumpy roads may
cause severe vibration and cause the sound
to skip.
3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
WARNING
For your safety, do not watch or operate the touch panel while driving.
CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THE COMPACT DISC PLAYER AND MINI DISC
PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE COULD
VOID THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
DXZ866MP
280-8350-00
3
English
2. PRECAUTIONS
Sloping Console
English
This unit uses a SLOPING CONSOLE to make
large screen displays possible.
When you use the SLOPING CONSOLE, be
sure to close it.
CAUTION
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the SLOPING
CONSOLE before leaving this unit unused for
a prolonged period or switching OFF the
ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the safety
mechanism. This is normal.
3. If you move the SLOPING CONSOLE by
hand, this may start play. To correct this play,
Q]
with the power for the unit ON, press the [Q
button to close the SLOPING CONSOLE.
4. After a disc is ejected, the SLOPING
CONSOLE automatically returns to the tilted
or closed state. If there is any obstruction
when the SLOPING CONSOLE tries to close,
the safety mechanism is triggered and the
SLOPING CONSOLE returns to the open
state. If this happens, remove the
Q] button.
obstruction, then press the [Q
5. To avoid scratching the compact disc, keep
the 12 or 8 cm CD level when loading or
removing it.
Handling Compact Discs
Use only compact discs bearing the
or
mark.
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in the CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some CD-R and
CD-RW discs may not be playable. Therefore,
do not leave them for a long time in the car.
• New discs may
Ball-point pen
have some
roughness
Roughness
around the
edges. If such discs
are used, the player
may not work or the sound
may skip. Use a ball-point pen
or the like to remove any
roughness from the edge of the disc.
• Never stick labels on the surface of the
compact disc or mark the surface with a pencil
or pen.
• Never play a compact disc with any cellophane
tape or other glue on it or with peeling off
marks. If you try to play such a compact disc,
you may not be able to remove it from the CD
player or it may damage the CD player.
4
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
break the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight
or any heat source.
• Do not expose compact discs to excess
humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
DXZ866MP
280-8350-00
English
3. CONTROLS
Source unit
[Q] (OPEN/EJECT)
[ADJ]
Photo Sensor
IR-Receiver
[MODE]
[ROTARY]
[SRC]
[ ] (SOUND)
[ISR]
Display
With the SLOPING CONSOLE opened
[CD SLOT]
DCP Detaching Slider
DXZ866MP
280-8350-00
5
English
4. NOMENCLATURE
Names of the Buttons and their Functions
IR-Receiver
[ROTARY] knob
• Receiver for remote control unit. (Operating
range: 30° in all directions)
• Press the knob to turn the power ON.
• Press the knob to turn the power OFF.
• Turn the knob to adjust the volume.
[ADJ] button
• Use this button to set or adjust the various
settings in the adjust mode.
[CD SLOT]
[Q] (OPEN/EJECT) button
DCP Detaching Slider
• Open/closes the control panel.
To eject a disc, open the control panel first, and
then press this button once again.
• Removes the DCP.
Photo Sensor
• This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
• CD insertion slot.
Display
• Displays the various information that indicates
the operating state of this unit such as tuning/
play state and indicators.
• You can operate the display by touching or
the surface. (cf. page 9)
touching
[MODE] button
• Use this button to play in scan, repeat, or
random mode.
• Press and hold this button for 2 seconds or
longer to switch between standard and simple
operation displays.
[
] (SOUND) button
• Use this button for setting or adjusting various
settings such as ADF.
[ISR] (Instant Station Recall) button
• Immediately calls up a favorite radio station
regardless of the current mode. (This is the
ISR function.) You can store radio stations to
the [ISR] button by holding this button down for
2 seconds or longer in the radio mode.
[SRC] button
• Switches among sound sources as shown
below.
Radio ➜ CD/MP3 ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
Note:
External equipment not connected with CeNET is
not displayed.
6
DXZ866MP
280-8350-00
Operations when External Equipment is Connected to this Unit
English
● When the CD/DVD changer is
connected
∗ For details, see the section “CD changer
operations” (cf. page 35). For the DVD
changer, refer to the Owner’s Manual
provided with the DVD changer.
● When the TV is connected
∗ For details, see the section “TV
operations” (cf. page 38).
DXZ866MP
280-8350-00
7
Touch Panel Buttons
English
● Standard operation display
Left slide
button
Right slide
button
● Simple operation display
(To switch to the simple operation display, press
and hold the [MODE] button for 2 seconds or
longer.)
Left button
98.10
FM1
Right button
P3
P.CH
SEEK
PRESET
BAND
PS/AS
2:45 pm
DISP
FM1
P.CH
SEEK
Sub buttons
98.10
PRESET
Left slide button
• Touch this button for seek up/down or track up/
down operations.
• Touch and hold this button for fast-forward/fastrewind operations.
Right slide button
• Touch this button for preset channel up/down,
folder up/down, and disc up/down operations.
Sub buttons
• Shows functions available in a certain context.
BAND
PS/AS
2:45 pm
DISP
P3
Sub buttons
Left button
• Touch this button for seek down or track down
operations.
• Touch and hold this button for fast-rewind
operation.
Right button
• Touch this button for seek up or track up
operations.
• Touch and hold this button for fast-forward
operation.
Sub buttons
• Shows functions available in a certain context.
8
DXZ866MP
280-8350-00
Touch Panel Operations
Touch
Touch the display with your fingertip and take it
away within 1 second. This is the most basic
operation when operating the display.
Touch
Touch the display with your fingertip, and move
your finger to the up ( ) or down ( ) with your
fingertip still touching the display, and keep your
fingertip on the display. The current operation
continues for the time your fingertip is held on
the display. This operation is used, for example,
for fast-forwarding/fast-rewinding tracks.
Touch and hold
Touch the display with your fingertip and hold it
on the display for 1 or 2 seconds or longer. Do
not move your finger while you are touching the
display.
Touch
Touch the display with your fingertip, and move
your finger to the up ( ) or down ( ) with your
fingertip still touching the display, and take your
fingertip away within 1 second. This operation is
used, for example, selecting tracks or discs.
FM1
P3
P.CH
2:45 pm
DISP
98.10
MANU
DXZ866MP
280-8350-00
9
English
A touch panel display is used as the display on
this unit. You can operate this display just by
touching it with your fingertip. There are four
main display operations as follows:
English
5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Place the DCP to the SLOPING CONSOLE,
adjusting the metal connecters on DCP and
the SLOPING CONSOLE.
2. Press the DCP until it clicks into the
SLOPING CONSOLE.
Removing the DCP
1. Press the [Q] button to open the DCP.
2. Move the DCP detaching slider to the
“RELEASE” side.
3. Push and slide the DCP upward to remove.
* The DCP display lights and is ready to use.
CAUTION
∗ The SLOPING CONSOLE without DCP
closes automatically in a few seconds.
CAUTION
• If the slider is on the [RELEASE] side and
the DCP is not locked into place, it may fall
out from vibration of the car. This can break
the DCP, so after removing it, either firmly
reattach it on the unit or put it in its DCP
case.
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
• Do not try to remove or attach while
driving.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
• If you purchased a replacement DCP, an
electrical adjustment is necessary.
This adjustment requires technical
knowledge.
Please consult Clarion service or a Clarion
service station.
10
DXZ866MP
280-8350-00
English
6. REMOTE CONTROL
Receiver for remote control unit
Operating range : 30° in all directions
Remote control unit
Signal transmitter
[SRC]
[BND]
[
]
[ ], [ ]
[a], [d]
[MUTE]
[DISP]
[ISR]
[RDM]
[SCN]
[RPT]
Inserting the Battery
1. Turn over the remote control unit and slide the
cover in the direction indicated by the arrow in the
illustration.
2. Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing upwards.
3. Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
Insertion guide
3
2
CR202
5
4. Replace the cover and slide in until it clicks into
place.
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or damage
to surrounding materials. Always follow these safety
precautions:
• Use only the designated battery .
• When replacing the battery, insert properly, with +/polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
1
DXZ866MP
11
280-8350-00
English
Functions of the Remote Control Unit Buttons
Mode
Radio
CD changer
DVD changer
CD/MP3/WMA
Button
TV
[SRC]
Switches among radio, CD/MP3/WMA, CD changer, DVD changer, TV and AUX.
[BND]
Switches reception
band.
Returns to the first
track.
Moves the next disc
in increasing order.
Switches reception
band.
[
],[
]
Increases and decreases volume (in all modes).
[
],[
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second or longer:
Fast-forward/fast-rewind.
Moves preset
channels up and
down.
No function.
Switches between playback and pause.
No function.
[
]
[MUTE]
[ISR]
Turns mute on and off.
Recalls ISR radio station in memory.
When pressed and held for 2 seconds or longer: Stores current station into ISR memory (radio
mode only).
[DISP]
Switches between the title display and the spectrum analyzer display.
[SCN]
Preset scan.
When pressed and
held for 2 seconds or
longer:
Auto store.
Scan play.
When pressed and
held for 1 second or
longer:
Folder scan play
(MP3/WMA disc).
Scan play.
When pressed and
held for 1 second or
longer:
Disc scan play.
Preset scan.
When pressed and
held for 2 seconds or
longer:
Auto store.
[RPT]
No function.
Repeat play.
When pressed and
held for 1 second or
longer:
Folder repeat play
(MP3/WMA disc).
Repeat play.
When pressed and
held for 1 second or
longer:
Disc repeat play.
No function.
[RDM]
No function.
Random play.
When pressed and
held for 1 second or
longer:
Folder random play
(MP3/WMA disc).
Random play.
When pressed and
held for 1 second or
longer:
Disc random play.
Switches between TV
and VTR.
∗ Some of the corresponding buttons on the source unit and remote control unit have different functions.
12
DXZ866MP
280-8350-00
English
7. OPERATIONS
Basic Operations
CAUTION
Be sure to lower the volume before
switching the unit off or the ignition key. The
unit remembers its last volume setting. If you
switch the power OFF with the volume up,
when you switch the power back ON, the
sudden loud volume may hurt your hearing
and damage the unit.
Turning ON/OFF the power
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio ➜ CD/MP3 ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
∗ External equipment not connected with
CeNET is not displayed.
Turning on
Adjusting the volume
Note:
• Be careful when using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
∗ The volume level is from 0 (minimum) to
33 (maximum).
1. Press the [ROTARY] knob.
The mode that was previously active is
displayed.
Turning off
1. Press the [ROTARY] knob.
∗ The clock will stay displayed after the
power is turned OFF.
■ To turn off the clock display
Switching the operation
display mode
There are 2 basic operation displays: standard
operation display and simple operation display.
1. Press and hold the [MODE] button for 2
seconds or longer to switch the operation
display.
Touch the clock to turn off the clock display
while the power is off.
FM1
P.CH
SEEK
98.10
CODEMATIC function
When “CODEMATIC” is set to “ON”, and the
power is turned ON with the DCP attached, the
Touch Code display appears. Touch the display
in the order that was set in the adjust mode.
ADJ SETTING
CODEMATIC
OFF
RTN
PRESET
BAND
PS/AS
2:45 pm
DISP
P3
In the simple operation display, the operations of
touching
in the radio or CD mode display
screen are not required.
Descriptions given in this manual are mainly for
the standard operation display. For descriptions
for operations in the simple operation display,
refer to the descriptions for the screen displays
in the radio mode or the CD mode.
For details on the CODEMATIC function, see
“Using the security function” (cf. page 34).
DXZ866MP
13
280-8350-00
Basic Operations
English
Switching the background
3. Touch
on the left of the display to
select [DAY] or [NIGHT].
1. Touch [DISP].
COLOR SELECT
NIGHT
98.10
FM1
P.CH
SEEK
PRESET
BAND
PS/AS
on the left of the display to
2. Touch
choose the background.
DISPLAY EDIT
02
BGV
RTN
SP/ANA
RTN
2:45 pm
DISP
∗ DISPLAY EDIT screen displays.
P
∗ The background includes 12 wallpaper
images and 2 motion pictures.
∗ Choose [SCAN] to automatically display all
the wallpaper.
● Background
M01: WRC
M02: Landscape
P01: Car and Checker Flag
P02: 307WRC from Two View Points
P03: Rally Driver
P04: Driving Scene
P05: Cube
P06: Bubble
P07: Speaker
P08: Digital Image1 (Disc media)
P09: Digital Image2 (Broadcast media such
as satellite)
P10: Mixer
P11: Record Player
P12: Meter
3. Touch [RTN].
4. Touch
on the right of the display to
select the color to set.
● COLOR
• DARK BLUE
• IVORY
• WINE RED
• LIGHT BLUE
• GREEN
Adjusting the spectrum
analyzer
1. Touch [DISP].
01
Don
1. Touch [DISP].
2. Touch [COLOR].
∗ Display edit mode appears.
2. Touch [SP/ANA].
DISPLAY EDIT
P
<<
05
BGV
TITLE
D-BLUE
SP/ANA
BGV
TITLE
COLOR
SCROLL
COLOR
INPUT
RTN
∗ The display shows the spectrum analyzer
mode.
3. Touch
on the right of the display to
select the spectrum analyzer to set.
P
1
05
BGV
TITLE
D-BLUE
MID
COLOR
SENS
SPE/ANA
RTN
• You can choose from four types.
• When [SCAN] is selected, each of them is
displayed for about 10 seconds.
DISPLAY EDIT
<<
SP/ANA
2:45 pm
DISP
TOP
4. Touch [SENS] to select the sensitivity.
DISPLAY EDIT
05
AUTO
t Stop Be
01:01
DISPLAY EDIT
You can change the colors of the wallpaper
(from P05 to P12).
• It can be set to both “DAY” mode and “NIGHT”
mode.
D-BLUE
,
TRACK
■ To change wallpaper color
P
DARK BLUE
P3
RTN
∗ The [COLOR] is displayed only when you
choose wallpaper from P05 to P12.
P
1
05
BGV
TITLE
D-BLUE
LOW
COLOR
SENS
SPE/ANA
RTN
• You can choose from [HIGH], [MID], or [LOW].
5. Touch [RTN].
14
DXZ866MP
280-8350-00
Basic Operations
English
Switching the title display
You can display stored information such as disc
titles or track titles when playing back music in
CD or CD changer mode.
1. Touch [DISP] while a title is shown.
01
TRACK
02:53
2:45 pm
TOP
DISP
∗ Display edit mode appears.
2. Touch [TITLE].
DISPLAY EDIT
P
1
05
BGV
TITLE
D-BLUE
LOW
COLOR
SENS
SPE/ANA
RTN
∗ Title edit mode appears.
on the right of the display to
3. Touch
choose the kind of title to show.
DISPLAY EDIT
P
05
<<
TRACK
BGV
TITLE
SP/ANA
D-BLUE
AUTO
COLOR
SCROLL
RTN
∗ The title you have chosen is displayed. If it
is too long to fit into the display, it
automatically scrolls.
4. Touch [SCROLL].
• Select [AUTO] to scroll the title repeatedly.
• Select [ONCE] to scroll the title only once.
Notes:
• You cannot set the scroll options in User title
mode.
5. Touch [RTN].
●CD mode (MP3/WMA)
Folder title (when using a folder) ➜ Play
list (when using a play list) ➜ Track title
➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜
Folder title (when using a folder)...
Notes:
• MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.
DXZ866MP
15
280-8350-00
Radio Operations
English
Screen displays in the radio
mode
● Standard operation display
The standard operation display appears by
pressing the [SRC] button and selecting the
radio mode.
Preset No.
display
Title display
Reception
Frequency
band display
display
98.10
FM1
P3
BAND
Touching this switches the reception band.
Touching and holding this for 1 second or longer
switches between the manual tuning mode and
the seek tuning mode.
PS/AS
Touching this starts a preset scan.
Touching and holding this for 2 seconds or
longer starts an auto store.
Touching this during the preset scan/auto scan
ends the operation.
DISP
The display contents can be changed.
P.CH
SEEK
PRESET
BAND
PS/AS
2:45 pm
DISP
DISP
PRESET
SEEK/MANU
display
PS/AS
BAND
● Simple operation display
Pressing and holding the [MODE] button for 2
seconds or longer switches the simple operation
display.
a/d
FM1
P.CH
SEEK
98.10
PRESET
BAND
PS/AS
2:45 pm
DISP
P3
a/d (only in the simple operation display)
Touching these enables seek tuning or step
tuning (in the manual tuning mode).
Touching and holding these enables quick
tuning (in the manual tuning mode).
Listening to the radio
1. Press the [SRC] button to select the radio
mode.
Each press of the [SRC] button switches the
mode as follows:
Radio ➜ CD/MP3 ➜ (CD Changer) ➜
(DVD Changer) ➜ (TV) ➜ AUX ➜ Radio...
∗ The mode of equipment that is not
connected is not displayed.
Frequency display
The frequency currently being received is
displayed.
Touching
or
on the left slide
button in the standard operation display allows
you to perform seek tuning or manual tuning.
2. Touch [BAND] to switch the reception band.
Each touch of [BAND] switches the
reception band as follows:
Preset No. display
Touching
on the right slide button in the
standard operation display selects a preset
memory.
Tuning
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Title display
Displays the name of the broadcast channel
currently being received.
Reception band display
AM: AM band name
FM1: FM band name
PRESET
Touching this displays a preset memory No. list.
16
DXZ866MP
280-8350-00
Radio Operations
Preset memory
Seek tuning is a function for automatically
tuning stations with good reception.
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio
stations in memory.
1. Touch and hold [BAND] for 1 second or
longer if “MANU” is displayed.
Automatic tuning is possible when “SEEK” is
displayed.
2. Touch
on the frequency display.
“SEEK UP”/“SEEK DOWN” is displayed, and
tuning starts.
Tuning automatically stops at stations with
good reception.
■ To cancel tuning
1. Touch
1. Touch [BAND] to switch the reception band.
2. Operate the frequency display to tune to a
frequency to store.
3. Touch [PRESET].
The preset memory No. list is displayed.
4. Touch and hold the preset No. to store the
station to for 2 seconds or longer.
You will hear a long beep, and the station is
stored in memory.
on the frequency display again.
Auto store
Manual tuning
There are 2 ways available: quick tuning and
step tuning.
In the step tuning mode, the frequency changes
1 step at a time. In the quick tuning mode, you
can quickly tune the desired frequency.
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially.
● Quick tuning
Touch
on the frequency display. Tuning
stops when you take your finger away from the
panel.
1. Touch and hold [PS/AS] for 2 seconds or
longer.
“A-STORE” is displayed.
∗ Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
• When there are fewer than 6 stations with good
reception, low frequencies are automatically
returned to, and auto store is performed again. If
there are fewer than 6 stations even after auto
store is performed twice, stations stored so far
remain in memory.
Recalling a preset station
Preset scan
Recalling a preset station is a function for tuning
pre-stored stations.
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
2. Operate the frequency display to tune to a
frequency on which there is a broadcast.
● Step tuning
Touch
on the frequency display.
1. Touch [PRESET].
The preset memory No. list is displayed.
2. Touch the preset memory No.
∗ In the standard operation display, preset
No. can also be tuned by touching
.
■ To cancel tuning
1. Touch [PS/AS].
“P-SCAN” is displayed.
∗ The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
1. Touch [RTN].
DXZ866MP
17
280-8350-00
English
Seek tuning
Radio Operations
English
■ To cancel preset scan
1. Touch [PS/AS].
“P-SCAN” display disappears and the
stations that were being received when [PS/
AS] was touched are received next.
Instant station recall (ISR)
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit in other modes.
• The factory default setting is “FM87.9MHz”.
1. Press the [ISR] button.
“ISR” appears on the display.
■ To return to the previous mode
Press the [ISR] button again or press the [SRC]
button.
■ To store the station to “ISR”
In the radio mode, tune the station to store, and
press and hold the [ISR] button for 2 seconds or
longer.
You will hear a long beep, and the station
currently being received is stored to ISR.
18
DXZ866MP
280-8350-00
CD/MP3/WMA Operations
● Standard operation display
The standard operation display appears by
pressing the [SRC] button to select the CD/MP3
mode.
Track No.
display
Title display
Folder No.
display
MP3 (WMA)
MP3
01
Don
,
01
t Stop Be
TRACK
FOLDER
01:01
2:45 pm
DISP
TOP
DISP
TOP
Playing time
display
● Simple operation display
Pressing and holding the [MODE] button for 2
seconds or longer switches the simple operation
display.
a/d
Don
,
t Stop Be
TRACK
01
01:26
TOP
2:45 pm
DISP
Playing time display
Î00: 01: The playing time is displayed.
Track No. display
If
or
is touched, you can select the
track to play, or fast-forward or fast-rewind
tracks.
Title display
The selected title is displayed.
Folder No. display (in the case of MP3/WMA)
Touching
selects folders.
TOP
Touching this starts play from the track at the
top of the disc or folder being played.
Touching this pauses or resumes play.
DISP
The display contents can be changed.
a/d (only in the simple operation display)
Touching these buttons selects the track to play.
Touching and holding these buttons fastforwards or fast-rewinds tracks.
/
(Appears only in MP3/WMA discs
and the simple operation display)
Touching these buttons selects the folder to
play.
MP3/WMA
What is MP3?
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
This MP3 features the original audio data
compression to about 10 percent of its initial
size with a high sound quality. This means about
10 music CDs can be recorded on a CD-R disc
or CD-RW disc to allow a long listening time
without having to change CDs.
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by
Microsoft Corporation.
Notes:
• If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no audio is
output. (The DRM indicator blinks.)
• Windows Media™, and the Windows® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
● To disable DRM (Digital Rights
Management):
1. When using Windows Media Player 8, click
on TOOLS ➜ OPTIONS ➜ COPY MUSIC
tab, then under COPY SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
2. When using Windows Media Player 9, click
on TOOL ➜ OPTIONS ➜ MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
Personally constructed WMA files are used
at your own responsibility.
DXZ866MP
19
280-8350-00
English
Screen displays in the CD/
MP3 mode
CD/MP3/WMA Operations
English
Precautions when creating
MP3/WMA disc
● Default value is “CD”.
● Usable sampling rates and bit rates:
2. Touch [Å]/[Î] to go to the next page.
1. MP3: Sampling rate 11.025 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file
extension, the file cannot be played.
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files
without MP3/WMA data.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660
level 1, 2 or JOLIET or Romeo” as the
writing software format. Normal play may not
be possible if the disc is recorded on another
format.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 128 single byte
alphabetical letters and numerals (including
an extension).
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
3. Some noise may occur depending on the
type of encoder software used while
recording.
Multisession function
When a disc contains both CD-DA and MP3/
WMA type tracks mixedly, you can select which
type of the recorded tracks to play.
20
1. Press the [MODE] button.
3. Touch [MULTI SESS].
Each touch of [MULTI SESS] toggles the
MULTI SESS display between “CD” (play
CD-DA) or “MP3/WMA” (play MP3/WMA).
Disc
Setting Set to CD
Set to MP3/WMA
Mixed with CD and
Play CD
Play MP3/WMA
MP3/WMA type tracks
CD-DA
Play CD
Play CD
Play MP3/WMA Play MP3/WMA
MP3/WMA disc
∗ The multi-session selection setting is
reflected the next time you load a CD.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WMA
type, the CD cannot be played normally in some
cases.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
Loading a CD
1. Press the [Q] button.
The control panel opens.
2. Insert the disc into the CD SLOT.
When the disc is loaded, the control panel
automatically closes after several seconds,
and play starts.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD does not insert easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in the CD-R/CD-RW mode
may not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the CD
SLOT.
DXZ866MP
280-8350-00
CD/MP3/WMA Operations
Selecting a track
You can eject a disc by pressing the [Q] button
even if the engine key or ACC is at the OFF
position.
When a CD-R/CD-RW recorded with an MP3
file or a WMA file is loaded, you can select only
tracks recorded to the same folder by touching
on the track display.
CAUTION
When the disc is ejected, press the [Q]
button to close the control panel. If the
control panel is left open, you will hear a
double beep, and the control panel
automatically closes.
1. Press the [Q] button.
The control panel opens.
2. Press the [Q] button.
The disc is ejected.
Note:
• Always close the SLOPING CONSOLE after
opening it or ejecting the CD.
CAUTION
• Be careful not to catch your hand or
fingers while closing the SLOPING
CONSOLE.
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
1. To listen to the next track, touch
track display.
on the
2. To listen to the previous track, touch
twice on the track display.
Touching
plays the next track. If you
touch
more times, the track advances
ahead to the track for the number of times
you touched
and that track is played.
Touching
plays the previous track. If
you touch
more times, the track moves
back to the track for the number of times you
touched
and that track is played.
∗ If you touch
twice on the track display
while the start of the track is being played,
the track 2 tracks back is sometimes
played.
■ To select a folder
To select a different folder, touch
folder display on the right.
on the
Play list mode
This function allows you to play tracks, up to
latest 5 time stamps, by reading the play list
information written on the disc.
1. Press the [MODE] button.
2. Touch [Å]/[Î] to go to the next page.
3. Touch [PLAY LIST].
MODE 2 2
Listening to a disc already
loaded in the unit
1. Press the [SRC] button to select the CD/
MP3 mode.
∗ Play automatically starts when the mode
changes to the CD/MP3 mode.
Pausing play
1. Touch [
].
■ To resume play
1. Touch [
] again.
MULTI
SESS
PLAY
LIST
MP3 WMA
RTN
The operation of selecting the play list or
tracks in the play list is the same as that of
selecting a folder or tracks in a folder.
∗ Play list play is possible only when there is
a file whose extension is “.M3U” on the
CD-R/RW.
∗ Up to 5 play lists can be recognized, and
up to 255 files can be recognized per play
list.
■ Stopping play of play list
1. Press the [MODE] button.
DXZ866MP
21
280-8350-00
English
Backup eject function
CD/MP3/WMA Operations
English
2. Touch [Å]/[Î] to go to the next page.
3. Touch [PLAY LIST].
Notes:
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title changes from folder name to play list
name.
∗ Scan play starts from the next track after
the track currently being played.
■ To cancel scan play
1. Press the [MODE] button.
Folder scan play
Making a play list
This function allows you to locate and play the
first 10 seconds of the first track of all the folders
recorders on a disc.
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
1. Press the [MODE] button.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U.
3. Again, write this play list to the CD-R/RW,
etc.
Notes:
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
• When adding a play list, it is recommended to
write it in the “Root” folder.
2. Touch [FOLDER SCAN].
∗ Folder scan play starts from the folder
following the folder that is playing.
■ To cancel folder scan play
1. Press the [MODE] button.
Repeat play
This function allows you to play the current track
repeatedly.
1. Press the [MODE] button.
2. Touch [TRACK RPT].
■ To cancel repeat play
1. Press the [MODE] button.
Fast-forward/fast-rewind
1. To fast-forward, touch
display.
2. To fast-rewind, touch
display.
on the track
on the track
Folder repeat play
This function allows you to play the current
folder repeatedly.
1. Press the [MODE] button.
2. Touch [FOLDER RPT].
Top function
■ To cancel folder repeat play
The top function resets the CD player to the first
track of the disc.
1. Press the [MODE] button.
1. Touch [TOP].
Play starts from the first track (track No.1).
Random play
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
1. Press the [MODE] button.
2. Touch [TRACK SCAN].
22
This function allows you to play all tracks on the
disc at random.
When the disc contains 2 or more folders, all of
the tracks in the folder are played at random,
followed by all of the tracks in the next folder.
This is repeated for all folders.
1. Press the [MODE] button.
2. Touch [TRACK RDM].
DXZ866MP
280-8350-00
CD/MP3/WMA Operations
English
■ To cancel random play
1. Press the [MODE] button.
Folder random play
This function allows you to play all folders on the
disc at random.
1. Press the [MODE] button.
2. Touch [FOLDER RDM].
■ To cancel folder random play
1. Press the [MODE] button.
DXZ866MP
23
280-8350-00
Sound Adjustment
English
Adjustment items
You can adjust a sound effect or tone quality to
your preference.
Anti Distortion Filter (ADF) .................... Page 24
MAGNA BASS EXTEND ....................... Page 24
Sub-woofer speaker volume
(SW VOLUME) ................................. Page 25
Bass setting (BASS) ............................. Page 25
Treble setting (TREBLE) ....................... Page 25
Balance (BALANCE) ............................. Page 25
Fader (FADER) ..................................... Page 25
Filter (FILTER) ....................................... Page 26
Setting the ADF
• ADF is the abbreviation of Anti Distortion
Filter.
The adopted “Liveliness Enhancement Filter”
and “Sound Tone Compensation” functions
allow well-modulated realistic playback without
affecting the characteristics of the original sound
tone.
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you
prefer.
ADF-1 : Suitable for genuine speakers
ADF-2 : Suitable for separate speakers
ADF-3 : Suitable for co-axial speakers
USER : This setting can be adjusted by the
user to his or her individual preference.
OFF :
No sound effect
• The factory default setting is “OFF”.
Notes:
• As the volume changes when ADF is switched,
switch ADF with the volume and “SW VOLUME”
(sub-woofer) turned down as far as possible.
1. Press the [SOUND] button.
2. Touch [ADF].
SOUND 1 1
ADF
M-BASS
EX
OFF
OFF
BASS
TREBLE
BALANCE
FADER
0
0
RTN
3. Touch
on the right of the display to
select the ADF mode.
ADF MODE
ADF 1
1
RTN
∗ Select one of “USER”, “1”, “2”, “3”, or
“OFF”.
4. To change the details of the ADF setting,
press the [ADJ] button.
5. Touch
on the left of the display to
select the desired item.
Each touch of
switches the
adjustment item display as follows:
●Adjustment item (when USER is
selected in step 3)
BASS ➜ TREBLE ➜ COMP ➜ BASS...
●Adjustment item (when 1 to 3 is
selected in step 3)
LEVEL ➜ COMP ➜ LEVEL...
6. Touch
on the right of the display to
adjust the item.
∗ “BASS” and “TREBLE” can be adjusted
within the range 1 to 13.
∗ “LEVEL” can be adjusted within the range 3 to +3.
∗ Select either “ON” or “OFF” for “COMP”.
7. Press the [SOUND] button to return to the
original mode.
Setting MAGNA BASS
EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
• The factory default setting is "OFF".
1. Press the [SOUND] button.
2. Touch [M-BASS EX] to select "ON" or
"OFF".
∗ Each time you touch [M-BASS EX], the
adjustment item changes as following
order:
OFF ➜ ON ➜ OFF...
3. Press the [SOUND] button to return to the
original mode.
24
DXZ866MP
280-8350-00
Sound Adjustment
Adjusting the treble (Gain,
Frequency)
Adjusting the sub-woofer
1. Press the [SOUND] button.
• "SW VOLUME" (sub-woofer) can be adjusted
only when the "SUB-WOOFER" is set to "ON"
(cf. page 32).
• The factory default setting for SW VOLUME is
“0”.
1. Press the [SOUND] button.
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
2. Touch [TREBLE].
3. Touch
on the left of the display to
select the item.
Each touch of
switches the
adjustment items as follows:
GAIN ➜ FREQUENCY ➜ GAIN...
2. Touch [SW VOLUME].
SW VOLUME
0
RTN
3. Touch
on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-5 to +5.
4. Press the [SOUND] button to return to the
original mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
2. Touch [BASS].
3. Touch
on the left of the display to
select the item.
Each touch of
switches the
adjustment items as follows:
GAIN ➜ FREQUENCY ➜ Q ➜ GAIN...
4. Touch
on the right of the display to
adjust the setting.
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +8)
∗ The factory default setting for
"FREQUENCY" is "50". (Adjustment 50/
80/120Hz)
∗ The factory default setting for "Q" is "1".
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
on the right of the display to
4. Touch
adjust the setting.
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +6)
∗ The factory default setting for
"FREQUENCY" is "12k". (Adjustment
8kHz/12kHz)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
FADER:
Adjusts the volume balance between the front
and rear speakers.
• The factory default setting for BALANCE is
“0” and for FADER is “0”.
1. Press the [SOUND] button.
2. Touch [BALANCE] or [FADER].
BALANCE
0
RTN
3. Touch
on the right of the display and
adjust the item as desired.
∗ “BALANCE” can be adjusted within the
range L13 (left side emphasized) and R13
(right side emphasized).
∗ “FADER” can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
4. Press the [SOUND] button to return to the
original mode.
DXZ866MP
25
280-8350-00
English
Note:
When "1", "2", "3", or "USER" is selected for ADF
(Anti Distortion Filter), setting of MAGNA BASS EX
cannot be performed.
Sound Adjustment
English
Adjusting the filter frequency
Filter frequency
You can set a filter frequency value best suited
for your speakers.
* This item can be adjusted only when “SUBWOOFER” is set to “ON”.
• The factory default setting for FILTER is
“THROUGH”.
Filter adjustment
● SUB-W LPF (Subwoofer Low-Pass Filter)
adjustment
This filter cuts the signals above the selected
frequency value.
Each touch switches the frequency value as
follows:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz ➜
THROUGH...
Select the frequency that suits your subwoofer.
Set to “THROUGH” if you use powered
subwoofers with built-in low-pass filters.
1. Press the [SOUND] button.
2. Touch [FILTER].
3. Touch
on the right of the display to
select the frequency value.
• Select from THROUGH, 50Hz, 80Hz, or
120Hz.
4. Press the [SOUND] button to return to the
original mode.
26
DXZ866MP
280-8350-00
Common Operations
The “TITLE INPUT” screen appears when you
enter a title.
Title
TEXT
FONT
display
display
display
a-Z
FONT
1. Either receive the radio or TV station, or play
a CD for which you want to enter the title.
3. Touch [INPUT].
TEXT
RTN
MEMO
Number of titles
100 titles
100 titles
50 titles
2. Touch [DISP].
TITLE INPUT
Me I o d y
a
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
DISPLAY EDIT
P
<<
ABCDE
05
BGV
MEMO
TITLE
L-BLUE
/
RTN
FONT display
A : Capital alphabet letters
a : Small alphabet letters
1 : Numbers
: Symbols
¯ : Umlaut
A
Title display
The currently entered title is displayed.
TEXT display
to select the character to enter.
Touch
/
Touching these buttons moves the cursor
indicating input position.
RTN
Touching this cancels entry of titles, and returns
the display to the original screen.
MEMO
Touching this stores the title that was input, and
returns the display to the original screen.
Entering titles
You can give radio/TV stations and CDs a title
up to 10 characters long. These titles can be
displayed when broadcasts are received or
when playing CDs.
The number of titles that can be entered is as
follows:
Mode
CD mode
TV mode
Radio mode
English
Screen display in the TITLE
INPUT
Number of titles
50 titles
20 titles
30 titles
SP/ANA
COLOR
RTN
INPUT
The TITLE INPUT screen appears.
4. Touch [ ]/[ ] to move the cursor to indicate
the input position.
TITLE INPUT
A
A-Z
FONT
TEXT
RTN
MEMO
∗ Up to ten characters can be input.
CAUTION
Pressing the reset button clears all user
memories such as titles stored on this unit.
5. Touch
on [FONT] to select the type of
text.
Each touch of
switches the type of
text as follows:
Capital alphabet letters
(space) A B C D E F G H I J K L M N O P Q
RSTUVWXYZ
Small alphabet letters
abcdefghijklmnopqrstuvwxyz
Numbers
0123456789
Symbols
Umlaut
ÅÄËÉEÊÏÆØåäëéeêïöüæø
6. Touch
on [TEXT] to determine the
characters to enter.
7. Repeat steps 4 to 6 to enter the title.
8. Touch [MEMO].
You will hear a long beep, and the title is
stored in memory.
DXZ866MP
27
280-8350-00
Common Operations
English
■ When a new title is stored beyond the
maximum number of titles
In the case of a radio or TV station
Titles not stored to preset channels and ISR
(radio stations only) are automatically cleared,
and the new title is stored in memory.
In the case of a CD
Titles of CDs that have been played the least
are cleared, and the new title is stored in
memory.
4. When “ENT” is displayed at the right of the
display, touch [ENT] to switch to the
adjustment details display.
on the right of the display to
5. Touch
set the details.
■ To return to the original mode
1. Press the [ADJ] button again.
■ To call up the last operated item
1. Touch [RECENT].
Clearing titles
1. Either receive the radio or TV station, or play
a CD whose title you want to clear.
2. Touch [DISP].
3. Touch [INPUT].
4. Touch and hold [RTN] for 2 seconds or
longer to erase the title.
5. Touch [MEMO].
∗ Erasing is performed by overwriting with a
blank title.
Triggered audio mute for
cellular telephones
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
∗ This function is not compatible with all cellular
telephones. Contact your local authorized
Clarion dealer for information on proper
installation and compatibility.
Changing settings
Selecting setting items
1. Press the [ADJ] button.
The mode changes to the adjust mode.
ADJ 1 1
APPEARANCE
SOUND
RECENT
TUNER
SETTING
RTN
2. Touch [APPEARANCE], [SOUND],
[TUNER], or [SETTING].
3. Touch
on the left of the display to
select the item to set.
28
DXZ866MP
280-8350-00
Common Operations
English
● Setting items
Main item
APPEARANCE
SOUND
TUNER
SETTING
Sub item
CLOCK EDIT
• Clock setting (cf. page 30)
MSG INFO
• Setting the message display ON/OFF (cf. page 30)
MSG INPUT
• Message information input (cf. page 30)
DIMMER IN
• Auto-dimmer setting (cf. page 31)
DMR LEVEL
• Setting the dimmer level (cf. page 31)
BRIGHT
• Adjusting the display brightness (cf. page 31)
BLINK LED
• Making the LED blink when DCP is removed (cf. page 31)
BEEP
• Setting beep (cf. page 32)
SCROLL SPD
• Adjusting the scroll speed (cf. page 32)
SRC ICON
• Setting the source icon display (cf. page 32)
SUB WOOFER
• Setting sub woofer speaker ON/OFF (cf. page 32)
AMP CANCEL
• Setting internal amplifier use ON/OFF (cf. page 32)
TV AREA
• Setting the TV area (cf. page 40)
TV DIVER
• Setting TV diversity (cf. page 40)
AUX SENS
• Setting the portable audio (AUX) input level (cf. page 33)
SYSTEM CHECK
• Performing a system check (cf. page 33)
CODEMATIC
• Setting security (cf. page 34)
SLIDE CONT
• Setting the slide direction of the slide buttons (cf. page 34)
DXZ866MP
29
280-8350-00
Common Operations
English
Setting the clock (CLOCK)
When the power is OFF, the clock is displayed.
The clock is displayed in 12-hour format.
3. Touch
on the left of the display to
select "MSG INFO".
ADJ APPEARANCE
MSG
INFO
OFF
1. Press the [ADJ] button.
RTN
2. Touch [APPEARANCE].
3. Touch
on the left slide button to select
“CLOCK EDIT” and touch [ENT].
ADJ APPEARANCE
CLOCK EDIT
[ ENT ]
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
RTN
The time (e.g. “2pm:45”) currently set on this
unit is displayed, and the mode changes to
the time setting mode.
4. Touch
hours.
on the left slide button to set
ADJ APPEARANCE CLOCK
2pm
:
45
SET
• Up to 30 characters can be entered.
• The factory default setting is “Welcome to
Optimedia”.
1. Press the [ADJ] button to set to the adjust
mode.
RTN
∗ If you operate another button while you
are setting the time, the time is not
adjusted.
5. Touch
minutes.
Entering messages to display
in message information (MSG
INPUT)
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select "MSG INPUT".
ADJ-APPEARANCE
on the right slide button to set
6. Touch [SET].
∗ You will hear a long beep, and the time is
set.
Notes:
• The clock cannot be adjusted when the power is
OFF.
• When the battery has been removed for
maintenance or for repair, set the time again.
7. Press the [ADJ] button to return to the
original mode.
MSG INPUT
RTN
4. Touch [ENT].
The mode changes to the message entry
mode.
5. Touch [ ]/[ ] to determine the entry
position.
MESSAGE INPUT
We I come
A
This function allows you to display a message
on the display when no operation is performed
for more than 30 seconds.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
to
A-Z
FONT
TEXT
MEMO
Displaying messages (MSG
INFO)
[ ENT ]
RTN
6. Touch
on [FONT] to select the type of
text.
Each touch of
switches the type of
text. For details, see page 27.
7. Touch
on [TEXT] to determine the
character to enter.
8. Repeat steps 5 to 7 to enter the message.
9. Touch [MEMO].
You will hear a long beep, and the message
is stored in memory.
10. Press the [ADJ] button to return to the
original mode.
30
DXZ866MP
280-8350-00
Common Operations
This function allows you to dim the lighting of
the display matched to the illumination or the
brightness inside your car.
Select either “AUTO” (interlocked to the
brightness inside your car) or “ILLUMI”
(interlocked to the illumination inside your car)
as the auto-dimmer setting.
• When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
• Set the dimmer setting at DMR LEVEL.
• The factory default setting is “AUTO”.
1. Press the [ADJ] button to set to the adjust
mode.
English
Setting the auto-dimmer
(DIMMER IN)
5. Press the [ADJ] button to return to the
original mode.
Adjusting the brightness of
the display (BRIGHT)
You can adjust the brightness of the display to
match the mounting angle of the unit.
• The factory default setting is “5”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “BRIGHT”.
ADJ APPEARANCE
BRIGHT
5
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “DIMMER IN”.
ADJ APPEARANCE
D I MMER
IN
AUTO
RTN
4. Touch
on the right of the display to
select “AUTO” or “ILLUMI”.
RTN
4. Touch
on the right of the display to
adjust the brightness.
∗ This setting item can be adjusted within
the range 1 to 12.
Adjust this setting item while viewing how
the appearance of the display changes.
5. Press the [ADJ] button to return to the
original mode.
5. Press the [ADJ] button to return to the
original mode.
Setting the dimmer level
(DMR LEVEL)
This function allows you to set how much the
displayed is to be dimmed.
• The factory default setting is “3”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “DMR LEVEL”.
Making the LED blink when
DCP is removed (BLINK LED)
You can make the LED on this unit blink when
the DCP is removed.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
on the left of the display to
3. Touch
select “BLINK LED”.
ADJ APPEARANCE
BL INK LED
OFF
ADJ APPEARANCE
DMR L E V E L
3
RTN
RTN
4. Touch
on the right of the display to
set the dimmer level.
∗ Select one of OFF (dimming OFF, bright),
1 (slightly dimmed) to 5 (dark).
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
DXZ866MP
31
280-8350-00
Common Operations
English
Setting the beep for when
buttons are operated (BEEP)
1. Press the [ADJ] button to set to the adjust
mode.
The short or long high-pitched tone you hear
when a button is operated is called a “BEEP”.
• The factory default setting is “ON”.
3. Touch
on the left of the display to
select “SRC ICON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
ADJ APPEARANCE
SRC
I CON
I CON
2. Touch [APPEARANCE].
RTN
3. Touch
on the left of the display to
select “BEEP”.
ADJ APPEARANCE
BEEP
4. Touch
on the right of the display to
select “ICON” or “SPE/ANA”.
5. Press the [ADJ] button to return to the
original mode.
OFF
RTN
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
Adjusting the title scroll
speed (SCROLL SPD)
This feature allows you to slow down the scroll
speed when the scroll speed is too fast, making
it difficult to view the screen.
• The factory default setting is “SPEED 1”.
1. Press the [ADJ] button to set to the adjust
mode.
Setting speaker ON/OFF
(SUB-WOOFER)
Set the sub-woofer (SUB-WOOFER) ON/OFF.
Be sure to set this setting to “OFF” when there
is no sub-woofer.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SOUND].
3. Touch
on the right of the display to
select "ON" or "OFF".
ADJ SOUND
SUB
WOOFER
2. Touch [APPEARANCE].
RTN
on the left of the display to
3. Touch
select “SCROLL SPD”.
ADJ APPEARANCE
SCROLL SPD
4. Press the [ADJ] button to return to the
original mode.
1
RTN
4. Touch
on the right of the display to
adjust the sensitivity.
∗ This setting item can be adjusted within
the range SPEED 1 to SPEED 4.
5. Press the [ADJ] button to return to the
original mode.
Setting the source icon
(SRC ICON)
You can change the source icon on the display.
• The factory default setting is “ICON”.
32
ON
Setting internal amplifier use
ON/OFF (AMP CANCEL)
Set internal amplifier use ON/OFF matched to
whether or not an external amplifier is used.
Set AMP CANCEL to “ON” (internal amplifier
use OFF) when an external amplifier is
connected and the internal amplifier is not used.
• The factory default setting is “OFF” (internal
amplifier used).
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SOUND].
DXZ866MP
280-8350-00
Common Operations
ADJ SOUND
AMP CANCEL
OFF
RTN
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
Performing a system check
(SYSTEM CHECK)
This function allows you to perform a system
check when an external equipment is connected
to this unit.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select “SYSTEM CHECK”.
ADJ SETTING
SYSTEM CHECK
AUX function
This system has an external RCA input so you
can listen to sounds and music from external
devices connected to this unit.
Setting the input level (AUX
SENS) of portable audio (AUX
mode)
This function allows you to set the input level of
optional external devices connected to this unit.
• The factory default setting is “MID”.
[START]
RTN
4. Touch [START].
The confirmation display appears.
5. Touch [OK].
ADJ SETTING
OK
CANCEL
After this operation, the display returns to
the original mode.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select "AUX SENS".
ADJ SETTING
AUX SENS
MID
RTN
4. Touch
on the right of the display to
set the input level.
∗ Select LOW, MID or HIGH.
Notes:
• When the input level is overloaded, “OVERLOAD”
appears. Adjust AUX SENS or the input level so
that “OVERLOAD” disappears.
5. Press the [ADJ] button to return to the
original mode.
DXZ866MP
33
280-8350-00
English
3. Touch
on the left of the display to
select “AMP CANCEL”.
Common Operations
English
Using the security function
(CODEMATIC)
This function prevents persons who do not know
the touch sequence from easily operating this
unit. The Touch Code display appears when
DCP is attached and the power is turned ON
with “CODEMATIC” set to “ON”.
If you touch the display in this screen in the
preset order, “SUCCESSFUL” is displayed and
the power is turned OFF.
When the power is next turned ON, the Touch
Code display does not appear, and the main
display in the radio mode or CD mode is
displayed.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select “CODEMATIC”.
ADJ SETTING
CODEMAT I C
CODE MATIC
1
2
3
4
When you touch 4 times, and 4 indicators
light, you will hear a long beep, and the
original mode is returned to.
■ To cancel CODEMATIC
If you have forgotten the touch order, either
touch [4], [1], [3] and then [2] in that order, or
press [SCN] on the remote control unit.
Setting the slide direction of
the slide buttons (SLIDE
CONT)
This function allows you to set the direction of
the left and right slide buttons.
• The factory default setting is “UP ➜ +”.
1. Press the [ADJ] button to set to the adjust
mode.
OFF
2. Touch [SETTING].
RTN
2 types of items are displayed for
“CODEMATIC”, items for which “ON” or
“OFF” is displayed at the right of the screen,
and items for which “INPUT” is displayed at
the right of the screen. Here, select the item
for which “ON” or “OFF” is displayed at the
right of the display.
on the right of the display to
4. Touch
select “ON” or “OFF”.
5. Touch
on the left of the display to
select “CODEMATIC”.
3. Touch
on the left of the display to
select “SLIDE CONT”.
ADJ SETTING
SLIDE CONT
UP
RTN
4. Touch
on the right of the display to
select “UP ➜ +” or “DOWN ➜ +”.
5. Press the [ADJ] button to return to the
original mode.
ADJ SETTING
CODEMATIC
INPUT
RTN
Here, select the item for which “INPUT” is
displayed at the right of the display.
6. Touch [INPUT].
The Touch Code display appears.
7. Enter the touch code.
∗ Touch [1] to [4] at the bottom of the display
at random. You can also repeatedly touch
the same number.
34
DXZ866MP
280-8350-00
English
8. OPERATIONS OF ACCESSORIES
CD Changer Operations
CD changer
When an optional CD changer is connected
through the CeNET cable, this unit can control
CD changer operations. This unit can be
connected to a total of 2 CeNET-wired CD
changers.
■ When 2 CD changers are connected
Press the [SRC] button to select the changer
connected to this unit. (Each press of the [SRC]
button switches the changer.)
• If the CD changer does not contain a
magazine, “NO MAGAZINE” is displayed, and
if the magazine does not contain a CD, “NO
DISC” is displayed.
• For details on the title display, see “Switching
the title display” (cf. page 15).
Screen displays in the
changer mode
Title
display
Track No. display
Touching
or
allows you to select
the track to play, or fast-forward/fast-rewind
tracks.
Title display
The selected title is displayed.
Disc No. display
Touching
selects discs.
s
Touching this pauses or resumes play.
DISP
The display contents can be changed.
a/d (only in the simple operation display)
Touching these selects the track to play.
Touching and holding these fast-forwards/fastrewinds tracks.
/
(Only in the simple operation
display)
Touching these buttons selects the disc to play.
● Standard operation display
The standard operation display appears by
pressing the [SRC] button to select changer
modes.
Track No.
display
Playing time display
Î00:01: The playing time is displayed.
Disc No.
display
CAUTION
CD-ROM discs cannot be played from every
CD changer. This depends on the model.
01
1
TELL ME
TRACK
DISC
2:45 pm
DISP
03:09
Playing time
display
s
Note:
• Some CDs recorded in the CD-R/CD-RW mode
may not be usable.
DISP
● Simple operation display
Pressing and holding [MODE] button for 2
seconds or longer switches the simple operation
display.
a/d
TELL ME
TRACK
01
DISC
03:29
2:45 pm
DISP
1
DXZ866MP
35
280-8350-00
CD Changer Operations
English
Selecting the changer mode
Fast-forward/fast-rewind
1. Press the [SRC] button to select the changer
mode.
∗ Each time you press the [SRC] button, the
display switches as follows:
1. To fast-forward, touch
display.
Radio ➜ CD/MP3 ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
∗ The mode of equipment that is not
connected is not displayed.
Play starts automatically when the mode
changes to the changer mode.
2. To fast-rewind, touch
display.
on the track
on the track
Scan play
Pausing play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is
canceled.
The scan play function is useful when you want
to select a desired track.
1. Touch [s].
1. Press the [MODE] button.
■ To resume play
2. Touch [TRACK-SCAN].
∗ Scan play starts from the next track after
the track currently being played.
1. Touch [s] again.
■ To cancel scan play
Selecting a CD
1. Press the [MODE] button.
1. Touch
on the disc No. display to
select a disc.
Play starts.
∗ If magazine does not contain the disc you
selected, the No. for that disc is not
displayed.
Selecting a track
1. To listen to the next track, touch
track display.
on the
2. To listen to the previous track, touch
twice on the track display.
plays the next track. If you
Touching
touch
more times, the track advances
ahead to the track for the number of times
you touched
and that track is played.
Touching
plays the previous track. If
you touch
more times, the track moves
back to the track for the number of times you
touched
and that track is played.
∗ If you touch
twice on the track display
while the start of the track is being played,
the track 2 tracks back is sometimes
played.
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected changer. This function
continues automatically until it is canceled.
Disc scan play is useful when you want to select
a desired disc.
1. Press the [MODE] button.
2. Touch [DISC SCAN].
∗ Disc scan play starts from the next disc
after the disc currently being played.
■ To cancel disc scan play
1. Press the [MODE] button.
Repeat play
Repeat play continuously plays the current track.
This function continues automatically until it is
canceled.
1. Press the [MODE] button.
2. Touch [TRACK RPT].
■ To cancel repeat play
1. Press the [MODE] button.
36
DXZ866MP
280-8350-00
CD Changer Operations
English
Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically
replays the current disc over from the first track.
This function continues automatically until it is
canceled.
1. Press the [MODE] button.
2. Touch [DISC RPT].
■ To cancel disc repeat play
1. Press the [MODE] button.
Random play
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is canceled.
1. Press the [MODE] button.
2. Touch [TRACK RDM].
■ To cancel random play
1. Press the [MODE] button.
Disc random play
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is canceled.
1. Press the [MODE] button.
2. Touch [DISC RDM].
■ To cancel disc random play
1. Press the [MODE] button.
DXZ866MP
37
280-8350-00
TV Operations
English
TV tuner function
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV, you need a TV tuner and
a monitor.
Screen displays in the TV
mode
● Standard operation display
The standard operation display appears by
pressing the [SRC] button to select the TV
mode.
Reception
Channel display
band display
Preset No.
Title display
display
TV1
3ch
MANU
2:45 pm
PRESET
BAND
PS AS
DISP
DISP
PRESET
SEEK/MANU
indicator
P1
P.CH
PS/AS
BAND
TV1
MANU
2:45 pm
3ch
PS AS
DISP
P.CH
P1
Channel display
3ch: The channel currently being received is
displayed.
Touching
or
in the standard
operation display allows you to perform seek
tuning or manual tuning.
Title display
The name of the station currently being received
is displayed.
VTR : In video mode
Touching these switches the display.
38
PS/AS
Touching this starts a preset scan.
Touching and holding this for 2 seconds or
longer starts an auto store.
Touching this during the preset scan/auto scan
ends the operation.
BAND
Touching this switches the reception band.
Touching and holding this for 1 second or longer
toggles between the manual tuning mode and
the seek tuning mode.
a/d (only in the simple operation display)
Touching these buttons enables seek tuning or
step tuning (in the manual tuning mode).
Touch and holding these buttons enables quick
tuning (in manual tuning mode).
Selecting the TV mode
1. Press the [SRC] button to select the TV
mode.
Each press of the [SRC] button switches the
mode as follows:
a/d
BAND
Preset No. display
on the right slide button in the
Touching
standard operation display selects a preset
memory.
Touching [PRESET] displays the preset memory
number list.
DISP
The display contents can be changed.
● Simple operation display
Pressing and holding the [MODE] button for 2
seconds or longer switches the simple operation
display.
PRESET
Reception band display
TV1 : Band name
Radio ➜ CD/MP3 ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
∗ The mode of equipment that is not
connected is not displayed.
Switching the reception band
1. Touch [BAND] to switch the reception band.
Each touch of [BAND] switches the
reception band.
TV1 ➜ TV2 ➜ TV1...
DXZ866MP
280-8350-00
TV Operations
Preset memory
Seek tuning is a function for automatically
tuning stations with good reception.
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
1. Touch and hold [BAND] for 1 second or
longer while “MANU” is displayed.
Automatic tuning is possible when “SEEK” is
displayed.
2. Touch
on the channel display.
“SEEK UP/SEEK DOWN” is displayed, and
tuning starts.
Tuning automatically stops at stations with
good reception.
■ To cancel tuning
1. Touch
on the channel display again.
Manual tuning
There are 2 ways available: quick tuning and
step tuning.
In the step tuning mode, the frequency changes
1 step at a time. In the quick tuning mode, you
can quickly tune the desired frequency.
1. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
2. Operate the channel display to tune to a
channel on which there is a broadcast.
● Step tuning
Touch
on the channel display.
● Quick tuning
Touch
on the channel display. Tuning
stops when you take your finger away from
the panel.
Recalling a preset station
This function allows the user to select a preset
station.
1. Touch [PRESET].
The preset memory No. list is displayed.
2. Touch the preset memory No.
∗ The station can also be tuned by touching
in the standard operation display.
■ To cancel tuning
1. Touch [BAND] to switch the reception band.
2. Operate the channel display to select the
station to store to.
3. Touch [PRESET].
The preset memory No. list is displayed.
4. Touch and hold the preset No. to store for 2
seconds or longer.
You will hear a long beep, and the station is
stored in memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
1. Touch and hold [PS/AS] for 2 seconds or
longer.
“A-STORE” appears on the display.
∗ Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
• When there are fewer than 6 stations with good
reception, low frequencies are automatically
returned to, and auto store is performed again. If
there are fewer than 6 stations even after auto
store is performed twice, stations stored so far
remain in memory.
Preset scan
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1. Touch [PS/AS].
“P-SCAN” appears on the display.
∗ The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
1. Touch [RTN].
DXZ866MP
39
280-8350-00
English
Seek tuning
TV Operations
English
■ To cancel the preset scan
Setting the TV Diver
1. Touch [PS/AS].
“P-SCAN” disappears, and the stations that
were being received when [PS/AS] was
touched are received next.
You can change the reception setting for the TV
antenna connected to the TV tuner.
• Set this item to “OFF” when a TV diversity
antenna is not in use.
• The factory default setting is “ON”.
Watching a video
1. Press the [ADJ] button to set to the adjust
mode.
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press the [MODE] button.
2. Touch [TUNER].
3. Touch
on the left of the display to
select [TV DIVER].
ADJ TUNER
TV D I V E R
2. Touch [TV/VTR].
∗ Every time you touch this, the function
switches between TV and VTR.
ON
RTN
4. Touch
on the right of the display to
select [ON] or [OFF].
5. Press the [ADJ] button to return to the
original mode.
Setting the TV area
(TV AREA)
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to set the adjust
mode.
2. Touch [TUNER].
3. Touch
on the left of the display to
select “TV AREA”.
ADJ TUNER
TV AREA
******
RTN
4. Touch
on the right of the display to
select the area.
5. Press the [ADJ] button to return to the
previous mode.
The above operations are required when a
TV tuner other than TTX7501z is connected.
40
DXZ866MP
280-8350-00
General
Problem
Cause
English
9. IN CASE OF DIFFICULTY
Measure
Power does not
turn on.
(No sound is
produced.)
Fuse is blown.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
Incorrect wiring.
Consult your store of purchase.
No audio when
operating the unit
with amplifiers.
Amplifier turn-on lead is
Turn the unit off and check each wire for a possible
shorted to ground or
short. If the amplifier turn-on lead shorts out, cover it
excessive current is required. with insulation such as tape.
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to noise,
etc.
Turn off the power, then
remove the DCP by
referencing "Removing
the DCP" (cf. page 10).
Press the reset button for
about 2 seconds with a
thin rod.
Display is not
accurate.
DCP or main unit connectors
are dirty.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
No sound heard.
The speaker protection
circuit is operating.
1. Check the speaker connection.
2. Turn down sound volume. Function can also be
restored by turning the power off and on again.
3. If the sound is muted again, consult your store of
purchase.
No sound heard.
There is a disc other than a
compact disc or foreign
matter already in place.
With the SLOPING CONSOLE open, press and hold
the [Q] button for 3 seconds or longer.
The foreign matter is forcibly ejected.
Reset button
CD/MP3/WMA
MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.
a disc.
Sound skips or is
noisy.
Sound is cut or
skipped.
Noise is
generated or
noise is mixed
with sound.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Disc is dirty.
Clean the disc with a soft cloth.
Disc is heavily scratched or
warped.
Replace with a disc with no scratches.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
DXZ866MP
41
280-8350-00
English
CD/MP3/WMA
Problem
42
Cause
Measure
Sound is bad
directly after
power is turned
on.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
File name or extension is not
correct.
Use alphanumeric/ASCII characters for MP3/WMA
file name.
Use “.M3U” for the file extension of a play list.
Play list play is
not performed.
DXZ866MP
280-8350-00
English
10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
General
DVD changer
CD changer
CD/MP3/WMA
Error Display
Cause
Measure
ERROR 2
A DISC is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult your store of purchase.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
ERROR 6
A DISC is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
ERROR 2
A DISC inside the CD changer is not
loaded.
This is a failure of CD changer’s mechanism
and consult your store of purchase.
ERROR 3
A DISC inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
ERROR 6
A DISC inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
ERROR 2
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and consult your store of purchase.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, nonwarped-disc.
ERROR 6
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
ERROR P
Parental level error
Set the correct Parental level.
ERROR R
Region code error
Eject the disc and replace correct region
code disc.
AMP GUARD
The speaker protection circuit is operating.
During this operation, if any volume
operation is performed, the display shows
“AMP GUARD”.
“AMP GUARD” sometimes functions when
special test signals are used.
1. Turn down sound volume. Function can
also be restored by turning the power off
and on again.
(Speaker volume is reduced automatically
when the speaker protection circuit operates).
2. If the sound is muted again, consult our
service department.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
DXZ866MP
43
280-8350-00
English
11. SPECIFICATIONS
FM Tuner
Audio
Frequency Range:
87.0 MHz to 108.0 MHz
Usable Sensitivity:
9 dBf
50dB Quieting Sensitivity:
15 dBf
Alternate Channel Selectivity:
70 dB
Stereo Separation (1 kHz):
32 dB
Frequency Response (±3 dB):
30 Hz to 15 kHz
Maximum Power Output:
212 W (53 W × 4 ch)
Continuous Average Power Output:
18 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
Bass Control Action:
+16, –12 dB
Treble Control Action:
±12 dB
Line Output Level (CD 1 kHz):
4 V/F 2ch + 4V/R 2ch
4 V/SUB WOOFER 2ch
AM Tuner
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable), negative
ground
Current Consumption:
Less than 15 A, 3A
Speaker Impedance:
4 Ω (4 Ω to 8 Ω allowable)
Weight / Source unit:
3.74 lb. (1.7 kg)
Weight / Remote control unit:
1.41 oz. (40 g) (including battery)
Dimensions / Source unit:
7" (Width) × 2" (Height) × 6-5/16" (Depth)
[178 (W) × 50 (H) × 160 (D) mm]
Dimensions / Remote control unit:
1-3/4" (Width) × 4-7/16" (Height) × 1/2" (Depth)
[44 (W) × 113 (H) × 13 (D) mm]
Frequency Range:
531 kHz to 1629 kHz
Usable Sensitivity:
25 µV
CD Player
System:
Compact disc digital audio system
Usable Discs:
Compact disc
Frequency Response (±1 dB):
5 Hz to 20 kHz
Signal to Noise Ratio (1 kHz):
100 dB
Dynamic Range (1 kHz):
96 dB
Harmonic Distortion:
0.01%
General
Note:
• Specifications and design are subject to change without notice for further improvement.
44
DXZ866MP
280-8350-00
Owner’s manual
DXZ866MP
CD/MP3/WMA Receiver / CeNET & Touch Panel Control
CD/MP3/WMA接收器/ CeNET及触控面板控制
CD/MP3/WMA 리시버 / CeNET & 터치패널 컨트롤
Clarion Co., Ltd.
2006/1 (Abe·Abe)
All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.
PE-2697K
280-8350-00