10” (25.4cm) DVC SUBWOOFER

9-25/32''DIA

Aluminumized Composite Dust Cap

Fiber Dust Cap

Gold Plated Compression Terminal

Heavy Duty Coated Tinsel Leads

Air Cooling Voice Coil Chamber

Formed Top Plate

Rubberized Acoustic Dampener

Kapton Voice

Coil Former

25/32'' 5-15/32''

High Excursion NBR Surround

Molded Rubber Front Gasket

Rigid PP Injection Molded Cone

High Strength Stamped Steel Basket

High Temperature Nomex Spider

Heavy Duty Dual Copper Voice Coil

Dual Stacked 37 oz Strontium Ferrite Magnets

Electrical Specifications

Maximum Musical Input Power

Continuous Input Power

Sensitivity

Impedance

1500W

500W

82dB

4 ohms + 4 ohms

Thiele / Small Electromechanical Parameters

F o

Resonance Frequency

V as

Equivilant Stiffness

35Hz

18.5L

Q ts

Total Electromechanical Dampening 0.65

S d

Cone Area 314.1 cm²

Sealed Enclosure Recommendation

V b

Internal Area cu. ft. (liter)

F

3

-3dB Point (Hz)

Qtc Enclosure Damping

H Height -inch (cm)

W Width -inch (cm)

D Depth -inch (cm)

0.5 (14.16)

51

0.75

13 (33.02)

18.5 (46.99)

6.75 (17.15)

Ported Enclosure Recommendation

V b

F

3

F b

Internal Area cu. ft. (liter)

-3dB Point (Hz)

Tuning Frequency (Hz)

1.0 (28.32)

29

33

H Height -inch (cm)

W Width -inch (cm)

13 (33.02)

24 (60.96)

D Depth -inch (cm)

P

9.25 (23.50)

Port Diameter and Length -inch (cm) 3 x 15.25 (7.62x 38.74)

NOTE: Internal volume is measured before speaker and/or port displacement. External dimensions are based on the use of 3/4”

(1.9cm) material. The port can be placed on any fitting face as long as the port ends are not obstructed. When using enclosures other than recommended, contact technical support or your local installation expert. Proper enclosure design is one of the key components to subwoofer performance and should be handled by experienced installers. Please contact your authorized Clarion dealer for the best results.