RECESSED PAR20MH

LV TRIMLESS

DESCRIPTION:

An adjustable PAR20MH fixture suitable for multiple downlighting applications with one point of electrical entry. Powder coat finish on housing & lamp assembly.

Housing suitable for new construction applications.

Catalog #

Type

Project

COMBOLIGHT

®

LV Series

FIVE (5) Light Recessed

Next Generation Trimless

Multi-Lamp Luminaire

PAR20 Metal Halide

CONSTRUCTION:

All aluminum construction.

Perforated mesh plaster frame adheres to ceiling compound for seamless trimless mounting.

Beveled fixture opening provides easy mudding compound application. Can accommodate 0.50” or

0.625” drywall. Includes butterfly brackets for black iron commercial mounting.

Dimensions

A

Housing

Length

40.75”

B

Housing

Height

7.09”

C

Aperture

Length

35.00”

D

Aperture

Width

E F

Plaster Frame Plaster Frame

Width Length

G

Above Ceiling

Width

5.30” 11.05” 40.75” 13.25”

Ceiling

Cut-Out

38.20” x 8.50”

LAMP ASSEMBLY:

5 - PAR20MH lamps mounted in adjustable bezels. Each lamp can accept up to two optical accessories. 380º x 45º locking adjustment. Fixture provides 45º visual cut-off. Lamp holders retract for added internal adjustment.

Tabs for aircraft cable suspension above ceiling

G

B

A

Butterfly Brackets for Black Iron mounting

SYSTEM PROTECTION:

Thermal protection provided to guard against overheating, and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation

ELECTRICAL:

Aromat® electronic metal halide ballsts in remote housing.

Junction box is UL listed for through branch wiring, (access above ceiling not required) for 8

#12, 90°C supply conductors or

60°C for end of run. Ballasts and electrical accessible through ceiling opening via access door on housing sidewall.

Side mounted compartment houses wiring, Aromat® electronic ballasts and thermal protector.

Accessible through fixture opening.

Trimless

Detail

Ceiling mudding compound is applied directly to the edge of the aperture.

Perforated mesh plaster frame adheres to ceiling compound for seamless trimless mounting.

Beveled housing interior and standard retractable yokes allow lamp holders to slide within the housing for added adjustability.

E D

6.75" 6.75"

C

F

6.75" 6.75"

380º x 45º locking angular adjustment

45º visual cut-off

Includes Aromat® Electronic

Metal Halide Ballasts

Other Adders

CC - Two Circuit

CP - Chicago Plenum

ALL RSA COMBOLIGHT PRODUCTS

ARE MADE IN THE U.S.A.

Cat. # / Description

ORDERING EXAMPLE: LV250MH WH 39 120

= Five Light Trimless Recessed PAR20MH - White Interior - 39 watt lamps -

120 Volt

LV250MH : 5 Light Recessed Next Generation Trimless

Combo Fixture

PAR20MH

Interior Finish

BK - Black

WH - White

Optional Accessories - Details on Other Side

Baffle

Lamp Wattage

39 - 39 Watt PAR20MH

Snoots Louvers

Voltage

120 - 120 Volt

(Standard)

277 - 277 Volt

Lenses

S - Silver

PT - Custom (Specify)

SPECIFY - LV250MH ___ 39 ___

Specifications and Dimensions subject to change without notice.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031