advertisement
Performance Hardware
User’s Guide
R e m o v i n g D o m i n a t o r
D H X - 2 C o o l i n g F i n s
Version 1.0
An illustrated step-by-step guide to removing the cooling fins from Dominator and Dominator GT DDR3 memory modules.
February, 2010
Removing Dominator Cooling Fins
1
Dominator and Dominator GT
Removable Fins
Extended Cooling Fin (Black)
Extended Cooling Fin (Red)
Corsair H-30
Memory Cooler
Dominator and Dominator GT DDR3 memory modules are made using DHX-2 features, a revision of our original DHX cooling technology. One of the primary improvements is the use of removable cooling fins. The fins can be removed so that end users can easily add custom cooling fins for aesthetic and cooling improvements as well as adding custom memory cooling solutions such as the H-30.
Removing Dominator Cooling Fins
2
Removing the Cooling Fins
The cooling fins are attached using 3 screws. You will need a 3/32” hex key or allen wrench to remove these screws.
3
Remove the 3 Screws
Removing Dominator Cooling Fins
Use the hex key to turn the screws counter clockwise. Once all 3 screws are removed, the cooling fin will come off.
Removing Dominator Cooling Fins
4
The Cooling Fin Removed
Once the cooling fins are removed, the modules are ready for the installation of upgraded cooling fins or custom cooling solutions. The grey material on the top of the heat sinks is thermal interface material or TIM. This is a thermally conductive material used to facilitate heat transfer from the heat sinks to the cooling fins. This material can be retained if needed and reused with the replacement fins or cooling solution or it can be discarded if not needed. You may want to retain it in the event that you need to reinstall the original cooling fin.
Removing Dominator Cooling Fins
Resources
Corsair Dominator and Dominator GT memory specifications can be found here: http://www.corsair.com/products/memory_home.aspx
Additional information on the Corsair H-30 memory cooler can be found here: https://shop.corsair.com/store/item_view.aspx?id=833087
Corsair Extended Cooling Fins can be found here: https:// shop.corsair.com/store/default.aspx
© February, 2010, Corsair Memory, Incorporated. All rights reserved. All trademarks and registered trademarks are the property of their respective owners in the United States and/or other countries.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project