advertisement
Ovens
Rev. 5 (7/08)
5925 Heisley Road • Mentor, OH 44060-1833
INSTALLATION, OPERATION and MAINTENANCE
MANUAL for Cres Cor
RADIANT OVENS
FL-2340
Page 1 of 14
1000-CH-SS
1000-CH-AL
1000-CH-SS-SPLIT
1000-CH-AL-SPLIT
Models:
1000-CH SERIES
Cabinet model number:
Cabinet serial number:
Authorized Service Agency:
Ph: Fax:
Keep this manual for future reference.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 2 of 14
5925 Heisley Road • Mentor, OH 44060-1833
TABLE OF CONTENTS
INSTALLATION INSTRUCTIONS ...................................................................................... 3, 4
OPERATING INSTRUCTIONS ............................................................................................ 5
Illustration, Control Panel ............................................................................................ 5
MAINTENANCE INSTRUCTIONS
How to Clean the Unit .................................................................................................. 6
Trouble Shooting Guide ............................................................................................... 7
Replacement ........................................................................................................ 8
Wiring Diagram for 1000-CH-SS or 1000-CH-AL ...................................................... 10,11
Wiring Diagram for 1000-CH-SPLIT .......................................................................... 12
HOW TO REVERSE DOOR OPENING ............................................................................... 13
SERVICE POLICY and AGENCY LIST ......................................................................... FL-1400
WARNING
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE
PERSONNEL ONLY
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 3 of 14
5925 Heisley Road • Mentor, OH 44060-1833
INSTALLATION INSTRUCTIONS
VENTING YOUR OVEN:
1. The purpose of ventilating hoods is to direct and capture smoke, grease-laden vapors, heat, odors, or fumes.
3. Most jurisdictions consider our low-temperature ovens (maximum temperature is 350°F/177°C) as low-heat appliances not requiring vent hoods.
2. Low temperature equipment (maximum temperature 250°F/121°C) does not produce heat, odors, fumes, grease-laden vapors or smoke and is not required to be vented.
4. Installation must conform with local codes. The authority having jurisdiction of enforcement of the codes will have the responsibility for making interpretations of the rules.
SPECIFICATIONS: All units are rated 3000 watts.
CMP MODEL NOS.
SINGLE OVENS
ELECTRICAL SPECS
(AC SERVICE)
Volts Ph Hz.
ELEC. LOAD
Amps Volts Amps
POWER SUPPLY REQUIREMENT
Ph Wire Volts NEMA
1000CHSSSPLIT
OR
1000CHALSPLIT
208
240
1
1
60
60
14
13
208
240
20
20
1
1
2
2
208
240
6-20P
6-20P
1000CHSSSPLIT3
OR
1000CHALSPLIT3
208
240
3
3
60
60
8
7
208
240
20
20
3
3
3
3
208
240
L15-20P
L15-20P
SPECIFICATIONS: All units are rated 6000 watts. *For USA Only - Canadian is 6-50P
CMP MODEL NOS.
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD POWER SUPPLY REQUIREMENT
Wire Volts DOUBLE OVENS
1000CHSS
OR
1000CHAL
1000CHSS3
OR
1000CHAL3
Volts
208
240
208
240
Ph
3
3
1
1
Hz.
60
60
60
60
Amps
29
25
16
14
Volts
208
240
208
240
Amps
30
30
20
20
Ph
3
3
1
1
Model number “AL” is aluminum outer body with stainless steel doors and interior.
All models designed for AC Service. Model number may have the letters: M, Z, S or CAN.
3
3
2
2
208
240
208
240
NEMA
*6-30P
*6-30P
L15-20P
L15-20P
IDENTIFYING YOUR CABINET:
Look for this label on the back of your cabinet. This information is needed when calling for questions or service.
-367
5925 HEISLEY RD. MENTOR, OHIO 44060
1000CHSS
R
UPPER RIGHT CABINET CORNER
29
208/240
3000
SAMPLE
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 4 of 14
5925 Heisley Road • Mentor, OH 44060-1833
INSTALLATION INSTRUCTIONS (continued)
HOW TO INSTALL CABINETS:
1. Remove all packing material from the inside and all vinyl from the outside of oven.
2. Place the oven in a well ventilated area on level fl oor.
Clearance requirements: 3” (76mm) at the back, 2”
(51mm) at the top, 1” (25mm) at both sides.
3. Install the pan slide racks on the sidewalls, if necessary.
4. Slide drip pan(s) onto the bottom of the compartment(s).
5. Remove (3) screws at the bottom front of the oven, under the door (See Figure).
6. Screw the drip tray bracket to the oven in those holes and place the drip tray onto the bracket.
All models are rated at 208/240 Volts.
NOTE: OVENS NEED TO BE INSTALLED BY A
QUALIFIED PERSON.
DRIP TRAY
DRIP TRAY
BRACKET
SCREWS
Check the voltage selector switch which is under an access cover on the back of the oven near the power cord.
Flip the switch “UP” for 208 Volts
Flip the switch “DOWN” for 240 Volts
MAKE SURE THE SWITCH POSITION MATCHES
YOUR POWER SOURCE.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
Power
Switch
OPERATING INSTRUCTIONS
Timer
Thermostat
“Hold”
Thermometer
Ovens
Rev. 5 (7/08)
Thermostat
“Cook”
FL-2340
Page 5 of 14
Yellow
Light
Green
Light
FOR FIRST-TIME OPERATION ONLY:
A new oven needs to “burn off” factory oils and glue before it’s fi rst use. Do NOT load food into oven until this has
been done!
1. Push switch to “ON”.
2. Set the Cook thermostat to 325°F/163°C.
3. Set the Hold thermostat to 150°F/66°C.
4. Set the timer to one (1) hour.
5. Allow oven to run automatically for one (1) hour of
Cook cycle and 30 minutes of Hold cycle.
6. Turn oven off and let cool.
7. Wipe inside clean with detergent and hot water.
HOW TO START UNIT
(after fi rst-time operation):
Push POWER switch “ON”.
NOTE: For HOLD or COOK mode, preheat unit to desired temperature for 30 minutes.
For Automatic Operation:
1. Set Cook thermostat to the cooking temperature you need.
2. Set Hold thermostat to the warming temperature you need. Proper food holding temperature is 140°F/60°C or higher.
3. Set Timer for the roasting time. The unit will automatically switch to the pre-set “hold” temperature after roasting time has expired.
WARNING
Air is VERY HOT when door is opened.
For Holding Operation ONLY:
Cold food is NOT to be added when unit is operating in HOLD mode.
1. Set HOLD thermostat to the temperature you need.
2. Set Timer at zero.
TO SHUT DOWN UNIT:
Push SWITCH to “OFF”.
NOTE: Ventilating fans will continue to run until cabinet is cool. Do NOT disconnect the power supply to the cabinet while the ventilating fan is still operating.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 6 of 14
5925 Heisley Road • Mentor, OH 44060-1833
HOW TO CLEAN THE UNIT:
WARNING
BEFORE cleaning the cabinet:
1. Unplug cord from wall. Allow cabinet to cool.
2. Do NOT hose cabinet with water.
3. Do NOT get water on controls.
4. Do NOT use abrasives or harsh chemicals.
Wipe up spills as soon as possible.
Clean regularly to avoid heavy dirt build-up.
Cleaning Hints:
1. Use the mildest cleaning procedure that will do the job.
2. Always rub in the direction of polish lines to avoid scratching the surface.
3. Use only a soft cloth, sponge, fi brous brushes, plastic or stainless steel pads for cleaning and scouring.
4. Rinse thoroughly with fresh water after every cleaning operation.
5. Always wipe dry to avoid water marks.
MODELS: 1000-CH-SS & 1000-CH-SS-SPLIT
SOIL
Routine Cleaning
CLEANER
Soap or mild detergent* and water.
STAINLESS
STEEL
CABINET
Stubborn Spots, Stains
Mild abrasive made for
Stainless Steel.
Inside and
Outside
Burnt on Foods or Grease
Chemical oven cleaner made for Stainless Steel.
Hard Water Spots & Scale Vinegar
METHOD
1. Sponge on with cloth
2. Rinse
1. Apply with damp sponge or cloth.
2. Rub lightly.
Follow oven cleaner manufacturer’s directions.
1. Swab or wipe with cloth.
2. Rinse and dry.
MODEL: 1000-CH-AL & 1000-CH-AL-SPLIT (Aluminum cabinet outside only with stainless steel doors and pan slides)
SOIL
Dirt
CLEANER
Mild detergent* and hot water, or mild abrasive cleaner.
METHOD
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Steam (no strong alkaline additive).
1. Rinse after steam cleaning.
2. Wipe dry.
ALUMINUM
CABINET Detergent* and hot water.
1. Wipe with soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
Outer body
ONLY
Fingerprints, Grease, Oil
Chemical oven cleaner made for aluminum.
Follow oven cleaner manufacturer’s directions
Mild abrasive cleaner.
Oily or waxy cleaner.
Apply with soft, clean cloth.
Water Spots Mild abrasive cleaner.
Wipe with damp cloth.
*Mild detergents include soaps and non-abrasive cleaners.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
MAINTENANCE INSTRUCTIONS
TROUBLE-SHOOTING GUIDE
Ovens
Rev. 5 (7/08)
FL-2340
Page 7 of 14
WARNING
IF UNIT GETS TOO HOT OR WON’T SHUT OFF, DISCONNECT
POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!
If hot unit is NOT working, fi rst check the following causes:
1. Cord is unplugged from wall outlet.
3. Switch(es) are turned off.
2. Circuit breaker/fuse to wall outlet is blown.
4. Thermostat(s) are turned off, or are set too low.
PROBLEM
Oven does not heat, or doesn’t heat properly
POSSIBLE CAUSE
1. Thermostat(s) defective
2. Heater contactor
3. On/Off Switch
*4. Fuses
Timer runs down, but oven does not go into hold mode.
Timer defective
Heaters will not shut off
1. Thermostat defective
2. Contactor defective
Vent fans do not shut off
1. Vent fan switch defective
2. Control compartment is still hot.
Vent fans do not operate
(See Note)
1. Vent fan switch defective
2. Vent fan defective
*3. Fuses
*Fuses are in 6000 Watt units only
SOLUTION
1. Replace
2. Replace
3. Replace
4. Replace
Replace
1. Replace
2. Replace
1. Replace
2. Wait until it cools
Check “Heaters will not shut off”
1. Replace
2. Replace
3. Replace
NOTE: Vent fans will not operate until the control compartment requires ventilation to limit temperatures.
Replacement of electrical components must be done by a qualifi ed electrician.
Refer to our Service Agency list, FL-1400 (found in the back of this manual), of authorized service centers.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 8 of 14
5925 Heisley Road • Mentor, OH 44060-1833
REPLACEMENT PARTS
Include all information on nameplate when ordering parts
3
9
10
1
6
ITEM DESCRIPTION
1. Switch (On/Off)
2. Knob, Thermostat & Timer
3. Timer
4. Thermometer
5. Thermostat, Cook
6. Thermostat, Hold
7. Pilot Light, Yellow
8. Pilot Light, Green
9. Switch, Fan
10. Relay
11. Contactor
12. Terminal Block (Input)
13. Terminal Block
14. Toggle Switch
15. Vent Fan
16. Fan Guard
17. Heater Kit, 208V, 195 Watt
Heater Kit, 240V, 1000 Watt
18. Door Latch Kit
19. Latch Strike
20. Door Assembly
21. Door Gasket
22. Door Hinge
2 5
CMP Part No.
0808-113-01-K
0595-061
0849-009-K
5238-031
0848-082
0848-083
0766-096
0766-097
0848-034
0857-102
0857-131
0852-109
0852-091
0808-020
0769-174
0769-167
0811-291-K
0811-290-K
1006-122-01-K
1006-122-02-K
1221-563-K
0861-267
0519-074-K
4
7
FRONT CONTROL PANEL
Upper & Lower Ovens
8
ITEM DESCRIPTION
23. Casters
24. Casters w/brake
25 Pan Slides
26. Drip Pan
27. Fuses, 3 Amp. (for units mfr’d before 7/08)
Fuse Holder (for units mfr’d before 7/08)
Fuses, 3 Amp. (for units mfr’d after 7/08)
Fuse Holder (for units mfr’d after 7/08)
28. Hi-Limit
29. Drip Tray
Wire Shelf
Power Cord (3000 Watts, 1-PH)
Power Cord (6000 Watts, 1-PH)
Power Cord (6000 Watts, 3-PH)
CMP Part No.
0569-306-K
0569-306-BK
0692-200
1017-099
0807-058
0807-048
0848-033
1017-100
1170-005
0810-173-01-K
0810-163-01-K
0810-164-01-K
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
5925 Heisley Road • Mentor, OH 44060-1833
REPLACEMENT PARTS
Include all information on nameplate when ordering parts
FL-2340
Page 9 of 14
13
27
11
12
15
16
14
28
Insulation
20
29
26
18 19
25
17
21
Model 1000-CH-SS is shown.
Model 1000-CH-SPLIT is half-size single door oven.
22
24
23
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 10 of 14
5925 Heisley Road • Mentor, OH 44060-1833
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 11 of 14
5925 Heisley Road • Mentor, OH 44060-1833
WIRING DIAGRAM FOR 1000CH SERIES, Control Panel
Roast
Hold
Roast
Hold
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 12 of 14
5925 Heisley Road • Mentor, OH 44060-1833
WIRING DIAGRAM FOR 1000CH-SPLIT SERIES
90 89 87 86 83 82
6-20P 3000 W
POWER SWITCH
17 11
SINGLE PHASE JUMPERS AS SHOWN
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
HOW TO REVERSE DOOR OPENING
Models: 1000-CH Radiant Ovens
HOW TO REVERSE THE DOOR
1. Pop off hinge covers with screwdriver.
2. Remove the screws from the hinges to the cabinet; remove the door and unscrew the latch strike from the oven. Keep all screws.
3. Rotate the door 180° so that the hinges are now on the left side of the door.
4. Re-mount the hinges in the same hole pattern on the opposite sides of the door opening.
5. Remove the latch and rotate it 180°; re-mount it to the right side of the door.
6. Adjust the hinges and latch for proper door seal.
7. Plug all the extra holes with screws and snap on the hinge covers.
NOTES:
HINGE
DOOR
Ovens FL-2340
Rev. 5 (7/08) Page 13 of 14
STRIKE PLATE
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens
Rev. 5 (7/08)
FL-2340
Page 14 of 14
NOTES:
5925 Heisley Road • Mentor, OH 44060-1833
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project