1
2
Install the software
Connect the AC adapter cable and the power cable
NOTE: If you ordered your computer with the
Dell Wireless Dock, the software is pre-installed.
a) Insert the Drivers and Utilities for the
Dell Wireless Dock media. The Dell
Wireless USB Install Shield Wizard
window appears.
b) Select UWB Card and Wireless
Dock drivers.
c) Follow the instructions on the screen to
install the software.
3
Complete the PIN association
a
b
c
a) Double-click the
icon located on
the taskbar to open the Wireless USB
Manager. Click Add New Device to
scan for wireless devices.
b) The Add new device window appears.
Enter the PIN code found on the
label located at the bottom of your
Dell Wireless Dock. Click Connec t →
Nex t → Finish.
c) The Dell Wireless Dock icon turns
green to indicate a successful
wireless connection.
NOTE: To associate your computer with the wireless docking station using the cable association method, see the User Manual that ships with your Dell Wireless Dock.
About Your Dell Wireless Dock
1
2
3
Dell™ Wireless Dock
Quick Start Guide
4
1. power light
2. wireless link and activity light
3. line out (speaker)
4. line in (mic)
5. USB connector (2)
5
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Dell and the DELL logo are trademarks of Dell Inc. Dell disclaims proprietary interest in the marks and names of others.
6
October 2009
7
8
9
10
www.dell.com | support.dell.com
11
Printed in China.
Printed on recycled paper.
04YJJ6A00
6. antenna
7. reset button
8. mini-USB connector for cable association
9. USB connector (2)
10. DVI connector
11. power cable connector