Dell OpenManage Server Administrator Version 7.4 SNMP Reference Guide

Dell OpenManage
SNMP Reference Guide Version 7.4
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and
intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.
2014 - 03
Rev. A00
Contents
1 Introduction............................................................................................................... 9
What’s New in This Release.................................................................................................................. 9
Supported SNMP Versions.................................................................................................................. 10
Introduction to the SNMP Reference Guide...................................................................................... 10
Managed Object Used in This Document.................................................................................... 10
Server Administrator Instrumentation MIB....................................................................................11
Server Administrator Remote Access MIB.................................................................................... 13
Server Administrator Baseboard Management Controller, ASF MIB............................................13
Server Administrator Field Replaceable Unit MIB......................................................................... 13
Server Administrator Storage Management MIB.......................................................................... 14
Server Administrator Change Management MIB..........................................................................14
Dell Remote Access Controller Out-of-Band MIB.......................................................................15
How This Guide Defines Technical Terms................................................................................... 15
Basic Terminology......................................................................................................................... 16
Frequently Used Terms in Variable Names...................................................................................16
Tables............................................................................................................................................. 16
Section Organization.....................................................................................................................18
Other Documents You May Need................................................................................................ 18
Introduction to the Server Administrator SNMP Subagent................................................................19
Management Information Base Object Identifiers...................................................................... 20
SNMP Security............................................................................................................................... 20
SNMP Traps....................................................................................................................................21
2 Server Administrator Group.................................................................................23
Instrumentation MIB Version Group.................................................................................................. 23
Management Information Base Major Version Number..............................................................23
Management Information Base Minor Version Number............................................................. 24
Management Information Base Maintenance Version Number..................................................24
Systems Management Software Group............................................................................................. 24
Systems Management Software................................................................................................... 25
Systems Management Software Variable Values..........................................................................27
System State Group............................................................................................................................ 28
System State Group Table............................................................................................................ 28
Chassis Information Group.................................................................................................................44
Chassis Information Group Tables............................................................................................... 45
Chassis Information Group Variable Values................................................................................. 74
Operating System Group....................................................................................................................84
Operating System Memory Table.................................................................................................84
System Resource Group..................................................................................................................... 87
System Resource Group Tables....................................................................................................87
System Resource Group Variable Values................................................................................... 100
Power Group..................................................................................................................................... 103
Power Group Tables................................................................................................................... 103
Power Group Variable Values..................................................................................................... 128
Thermal Group.................................................................................................................................. 136
Thermal Group Tables.................................................................................................................136
Thermal Group Variable Values.................................................................................................. 146
Remote Flash BIOS Group................................................................................................................148
Remote Flash BIOS Group Table................................................................................................ 148
Remote Flash BIOS Variable Values............................................................................................150
Port Group......................................................................................................................................... 152
Port Group Tables....................................................................................................................... 152
Port Group Variable Values......................................................................................................... 174
Device Group..................................................................................................................................... 177
Device Tables...............................................................................................................................178
Device Group Variable Values.................................................................................................... 222
Slot Group......................................................................................................................................... 246
System Slot Group Table............................................................................................................ 246
System Slot Variable Values........................................................................................................249
Memory Group..................................................................................................................................254
Physical Memory Tables............................................................................................................. 254
Memory Group Variable Values..................................................................................................270
BIOS Setup Control Group............................................................................................................... 273
BIOS Setup Control Group Tables..............................................................................................273
BIOS Group Variable Values....................................................................................................... 296
Local Response Agent Group.......................................................................................................... 303
LRA Group Tables....................................................................................................................... 303
Local Response Agent Variable Values...................................................................................... 307
Cost of Ownership Group................................................................................................................309
Cost of Ownership Group Tables.............................................................................................. 309
Cost of Ownership Variable Values............................................................................................ 335
Remote Access Group......................................................................................................................336
DRAC 5........................................................................................................................................ 336
Remote Access Variable Values.................................................................................................. 341
Cluster Group ................................................................................................................................... 351
Cluster Group..............................................................................................................................352
Cluster Group Variable Values....................................................................................................354
Baseboard Management Controller Group..................................................................................... 354
Baseboard Management Controller Group Tables................................................................... 354
Baseboard Management Controller Group Variable Values..................................................... 363
Field Replaceable Unit Group.......................................................................................................... 366
Field Replaceable Unit Group Tables......................................................................................... 366
Field Replaceable Unit Group Variable Values...........................................................................369
3 Storage Management Group............................................................................. 371
Storage Management Group............................................................................................................ 371
Storage Management Information Group....................................................................................... 372
Global Data Group............................................................................................................................ 373
Physical Devices Group.....................................................................................................................377
Controller Table.......................................................................................................................... 378
Channel Table............................................................................................................................. 394
Enclosure Table.......................................................................................................................... 398
Array Disk Table.......................................................................................................................... 406
Array Disk Enclosure Connection Table.....................................................................................419
Array Disk Channel Connection Table....................................................................................... 421
Fan Table..................................................................................................................................... 423
Fan Connection Table.................................................................................................................427
Power Supply Table.................................................................................................................... 429
Power Supply Connection Table................................................................................................432
Temperature Probe Table...........................................................................................................434
Temperature Probe Connection Table...................................................................................... 437
Enclosure Management Module Table...................................................................................... 439
Enclosure Management Module Connection Table................................................................. 443
Battery Table............................................................................................................................... 445
Battery Connection Table.......................................................................................................... 446
Tape Drive Table......................................................................................................................... 448
Logical Devices Group..................................................................................................................... 450
Virtual Disk Table......................................................................................................................... 451
Virtual Disk Partition....................................................................................................................458
Fluid Cache Table....................................................................................................................... 460
Fluid Cache Disk......................................................................................................................... 464
Fluid Cache Pool Table...............................................................................................................466
Array Disk Logical Connection Table.........................................................................................468
Storage Management Event Group................................................................................................. 470
4 Change Management Group.............................................................................473
Inventory Group................................................................................................................................473
Device Group.................................................................................................................................... 473
Device Group Table.................................................................................................................... 474
Application Group............................................................................................................................. 475
Application Group Table............................................................................................................. 475
Operating System Group.................................................................................................................. 477
Inventory Collector Product Information........................................................................................ 477
5 Chassis Management Controller Group.........................................................479
Product Information......................................................................................................................... 479
Chassis Status................................................................................................................................... 483
Chassis Power...................................................................................................................................489
CMC Power Information.................................................................................................................. 490
CMC PSU Information...................................................................................................................... 493
Chassis Servers................................................................................................................................. 494
CMC Server Information.............................................................................................................495
Chassis Alert......................................................................................................................................496
Chassis Alert 2............................................................................................................................. 497
Legacy Alerting................................................................................................................................. 498
6 SNMP Traps............................................................................................................ 501
Trap Variables.................................................................................................................................... 501
Understanding The Trap Description...............................................................................................503
Understanding Trap Severity............................................................................................................ 506
RAC Traps..........................................................................................................................................506
PowerEdge M1000e CMC Traps...................................................................................................... 507
PowerEdge VRTX CMC Traps.......................................................................................................... 508
System Trap Group.....................................................................................................................508
Storage Trap Group.....................................................................................................................512
Audit Traps................................................................................................................................... 515
Configuration Traps.................................................................................................................... 516
BMC Traps..........................................................................................................................................517
7 Storage Management Alert Reference............................................................ 521
Alert Monitoring and Logging...........................................................................................................521
Viewing Alerts.................................................................................................................................... 521
Alert Severity Levels...........................................................................................................................521
SNMP Support for Storage Management Alerts.............................................................................. 522
SNMP Trap Forwarding............................................................................................................... 522
SNMP Trap Definitions................................................................................................................ 522
Trap Variables.............................................................................................................................. 523
Viewing SNMP Traps......................................................................................................................... 525
Alert Descriptions and Corrective Actions.......................................................................................525
8 iDRAC7 MIB............................................................................................................ 527
Supported Systems........................................................................................................................... 527
Blade Servers............................................................................................................................... 527
Rack and Tower Servers..............................................................................................................527
iDRAC7 Supported SNMP Versions.................................................................................................. 527
iDRAC7 SNMP Data Security Features............................................................................................. 528
iDRAC7 Out-of-Band Group............................................................................................................ 528
RAC Information Group..............................................................................................................528
Chassis Information Group........................................................................................................ 530
System Information Group......................................................................................................... 530
Status Group................................................................................................................................534
Systems Details Group................................................................................................................534
Storage Details Group.................................................................................................................535
iDRAC7 Traps.................................................................................................................................... 535
Trap Variables.............................................................................................................................. 535
System Trap Group..................................................................................................................... 537
Storage Trap Group.................................................................................................................... 545
Updates Trap Group................................................................................................................... 548
Audit Trap Group........................................................................................................................ 548
Configuration Trap Group.......................................................................................................... 549
9 Standard Data Type Definitions........................................................................ 551
Common Data Types........................................................................................................................ 551
Variables with Data Types of State Capabilities and State Capabilities Unique.............................. 551
Dell Status Data Types...................................................................................................................... 552
Dell Date............................................................................................................................................553
Full Dates..................................................................................................................................... 554
10 SNMP Sample Output........................................................................................555
8
Introduction
1
This reference guide provides information about the Simple Network Management Protocol (SNMP)
Management Information Base (MIB) which is applicable for Dell OpenManage Version 7.
NOTE: This guide contains information that may also be applicable to earlier OpenManage
supported platforms.
This introduction is divided into two sections. The first section, Introduction to the SNMP Reference
Guide, explains the SNMP Reference Guide design. All essential Simple Network Management Protocol
(SNMP) terms are defined in this section. Some of the vocabulary may seem complex and unfamiliar to
system administrators who are using SNMP for the first time. SNMP experts can skim this section, and
beginners can read the section more carefully.
The second section, Introduction to the Server Administrator SNMP Subagent, is a more technical
introduction to the management information base (MIB) that underlies Server Administrator services.
What’s New in This Release
This release of Dell OpenManage SNMP introduces the following new features:
•
Added new varbinds for Dell OpenManage Server Administrator
– Added the following new varbind for:
Chassis Information Group
*
Added new MIB varbind for Chassis Node ID.
– Changes in varbinds for :
Operating System Group
*
Deprecated the varbind for operatingSystemMemoryTotalPhysicalSize
*
Added new MIB varbind to replace the deprecated varbind:
operatingSystemMemoryExtTotalPhysicalSize,
See Operating System Memory Table for more information.
– Changes in varbinds for:
Device Group : Memory Device Table
*
Deprecated the varbind for memoryDeviceSize
*
Added new MIB varbind to replace the deprecated varbind: memoryDeviceExtendedSize,
See Memory Device Table for more information.
– Changes in varbinds for:
Memory Group : Physical Memory Array Table
*
Deprecated the varbind for physicalMemoryArrayMaximumSize
*
Added new MIB varbind to replace the deprecated varbind
physicalMemoryArrayExtendedMaximumSize ,
9
See Physical Memory Array Table for more information.
– Added the following new varbind for:
Baseboard Management Controller Group
•
*
Added new MIB varbind for BMC Blade Form Factor.
*
Added variable values for Dell Blade Form Factor Type.
Added new varbinds for Dell OpenManage Server Administrator Storage Management
– Added the following new varbinds for:
Storage Management Group : Physical Devices Group
Controller Table
*
Added new MIB varbind for PI enable
Array Disk Table
*
Added new MIB varbind for PI capable, Width and Negotiated Link Width.
– Added the following new varbind for:
Storage Management Group : Logical Devices Group
Virtual Disk Table
*
Added new MIB varbind for Virtual Disk PI enable.
Supported SNMP Versions
Operating System
Supported OMSA SNMP version
Windows
SNMP v1
Linux
SNMP v1
Introduction to the SNMP Reference Guide
This reference guide provides a formatted version of the following Management Information Base that
are released with the current version of Dell OpenManage.
Sections in this guide follow MIB groups and provide explanations and definitions for the terms used to
define MIB objects. Content in this reference guide is organized as documented in the following
subsections.
Managed Object Used in This Document
The MIB is divided into several major groups. The following table provides information about the MIB
names, name of the agent that uses each MIB and the purpose:
MIB Name
Agent / Hardware Supported
Purpose of the MIB
10892.mib
Server Administrator
Provides the information about the systems
monitored by Server Administrator
10
MIB Name
Agent / Hardware Supported
Purpose of the MIB
instrumentation software. This is the primary
MIB for PowerEdge systems.
dcs3fru.mib
Server Administrator
Provides the information about the system
Field Replaceable Unit (FRU) to SNMP
management applications.
dcstorag.mib
Server Administrator Storage
Management
Provides the information about the storage
hardware components and RAID
configurations monitored by Server
Administrator.
iDRAC-SMIv1.mib
iDRAC7
Provides information about the SNMP data,
and traps, supported by the iDRAC7. This is
for SMv1.
iDRAC-SMIv2.mib
iDRAC7
Provides information about the SNMP data,
and traps, supported by the iDRAC7. This is
for SMv2.
dcs3rmt.mib
Dell Remote Access controller 5 Provides information about remote access
(DRAC 5)
components monitored by the Server
Administrator Remote Access Service.
rac_host.mib
Remote access out-of-band
agent
DELL-RAC-MIB.txt
Chassis Management Controller Provides information about components
(CMC)
monitored by the Chassis Management
Controller for modular chassis.
DcAsfSrv.mib
Baseboard Management
Controller (BMC)
Provides information about the components
monitored by the remote access out-ofband software agent.
Provides information about Dell server
Platform Event Traps generated by the
Baseboard Management Controller.
For further details see Release Notes for Management Information Base readme_mibs.txt.
Server Administrator Instrumentation MIB
The Server Administrator Instrumentation MIB ( filename 10892.mib ) provides instrumentation data that
allows you to monitor the health of a system with SNMP management applications. It provides:
•
Information about the status of temperatures, power supplies, voltages, currents, fans, and memory at
key points in the system
•
Rapid access to detailed fault and performance information gathered by industry standard systems
management agents
•
Version information for Basic Input/Output System (BIOS), firmware, and operating system
•
A detailed account of every cost of ownership (COO) detail about your system
In addition, traps are sent to report a change in status of the health of critical components.
The Server Administrator Instrumentation MIB structures its MIB objects into groups of scalar objects or
MIB tables that provide related information. The below table describes each Server Administrator
Instrumentation MIB group and lists the MIB group number assigned to the MIB group. The Server
Administrator Instrumentation MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB
11
group number>, where <MIB group number> is the MIB group number assigned to the MIB group. See
the relevant section for more information about the MIB objects defined in a MIB group.
Table 1. Server Administrator Instrumentation MIB Sections in This Guide
Section
Topics
MIB Group Numbers
2
Instrumentation MIB Version Group — defines version
numbers of the Instrumentation MIB
1
3
Systems Management Software Group — defines
100
information about the systems management software and
the supported systems management standards
4
System State Group — defines status, state, and
redundancy for a system and its components
200
5
Chassis Information Group — defines chassis types,
events, and indicators
300
6
Operating System Group — defines variables for name,
version, service pack, and other information about a
system’s operating system
400
7
System Resource Group — defines variables for input/
output ports, memory, interrupts, and direct memory
access
500
8
Power Group — defines variables for power units, power
supplies, and their current and voltage probes
600
9
Thermal Group — defines variables for temperature
probes and cooling devices
700
10
User Security Group — defines variables for creating and
modifying user accounts
800
11
Remote Flash BIOS Group — defines variables for
updating the system’s BIOS remotely
900
12
Port Group — defines variables for major port types such
as keyboard, monitor, small computer system interface
(SCSI), Universal Serial Bus (USB), and parallel and serial
ports
1000
13
Device Group — defines variables for pointing, keyboard,
processor, cache, memory, and personal computer
interface devices
1100
14
Slot Group — defines variables for the system’s slots
1200
15
Memory Group — defines variables for the system’s
physical memory
1300
16
BIOS Setup Control Group — defines variables for BIOS
functions such as boot sequence, speakers, Wake on the
local area network (LAN), diskettes, ports, and network
interface controllers (NIC)
1400
17
Local Response Agent Group — defines variables for
global settings and actions. These variables allow users to
predetermine how the system responds to a particular
type of event
1500
12
Section
Topics
MIB Group Numbers
18
Cost of Ownership Group — defines variables for tracking
data on the system’s service contract, lease, repair
records, trouble tickets, and so on
1600
20
Cluster Group — defines variables for systems that
operate as a cluster
1800
21
Baseboard Management Controller Group — provides
information about the Baseboard Management Controller
(BMC) that may be present in your system. In addition to
providing general information about the BMC, this group
provides information about the serial and local area
network (LAN) interfaces of the BMC
1900
26
Traps — defines the types of alerts that can be sent to
report the status of critical components
5000
Server Administrator Remote Access MIB
The Server Administrator Remote Access MIB ( filename dcs3rmt.mib ) provides in-band information
about remote access hardware that may be present in your system.
The Server Administrator Remote Access MIB structures its MIB objects into groups of scalar objects or
MIB tables that provide related information. Table below describes each Server Administrator Remote
Access MIB group and lists the MIB group number assigned to the MIB group. The Server Administrator
Remote Access MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group number>
where <MIB group number> is the MIB group number assigned to the MIB group. See the relevant section
for more information about the MIB objects defined in a MIB group.
Table 2. Server Administrator Remote Access MIB Sections in This Guide
Section
Topic
MIB Group Numbers
19
Remote Access Group — provides information about
remote access hardware that may be present in your
system and defines variables for administrative users,
SNMP trap destinations, modem configuration for dial-up
networking, dial-in configuration, and dial-out
destinations
1700
Server Administrator Baseboard Management Controller, ASF MIB
The Server Administrator BMC MIB (filename DcAsfSrv.mib) provides information about the traps sent by
BMC. The Server Administrator BMC MIB structures its MIB objects that provide related information. The
BMC MIB groups are identified by the SNMP OID 1.3.6.1.4.1.3183.1.1.<MIB group number>. The BMC MIB
adheres to ASF 2.0 standard and hence the enterprise ID is wired for management (3183).
Server Administrator Field Replaceable Unit MIB
The Server Administrator Field Replaceable Unit MIB (filename dcs3fru.mib) provides information about
field replaceable unit (FRU) hardware that may be present in your system.
The Server Administrator Field Replaceable Unit MIB structures its MIB objects into groups of scalar
objects or MIB tables that provide related information. The following table describes each Server
Administrator Field Replaceable Unit MIB group and lists the MIB group number assigned to the MIB
group. The Server Administrator Field Replaceable Unit MIB groups are identified by the SNMP OID
13
1.3.6.1.4.1.674.10892.1.<MIB group number> where <MIB group number> is the MIB group number
assigned to the MIB group. See the relevant section for more information about the MIB objects defined
in a MIB group.
Table 3. Server Administrator Field Replaceable Unit MIB Sections in This Guide
Section
Topic
MIB Group Numbers
22
Field Replaceable Unit Group — provides information
about field replaceable units that may be present in your
system
2000
Server Administrator Storage Management MIB
The Server Administrator Storage Management MIB (filename dcstorag.mib) provides storage
management data that allows you to monitor the health of storage resources with SNMP management
applications.
The following table describes each Server Administrator Storage Management MIB group and lists the
MIB group number assigned to the MIB group. The Server Administrator Storage Management MIB
groups are identified by the SNMP OID 1.3.6.1.4.1.674.<MIB group number> where <MIB group number>
is the MIB group number assigned to the MIB group. See the relevant section for more information about
the MIB objects defined in a MIB group.
Table 4. Server Administrator Storage Management MIB Sections in This Guide
Section
Topics
MIB Group Numbers
23
Storage Management Group — consists of definitions for
the following MIB groups:
10893
NA
20
NA
NA
130
140
NA
1
•
•
•
•
•
•
•
27
Storage Management Group
Storage Management Information Group
Global Data Group
Physical Devices Group
Logical Devices Group
Storage Management Event Group
Software Group
Storage Management Alert Reference — lets you monitor
the health of storage resources such as controllers,
connectors, array disks, and virtual disks
NA
Server Administrator Change Management MIB
The Server Administrator Change Management MIB (filename dellcm.mib) provides management data
that allows you to monitor the inventory of devices and applications with SNMP management
applications.
The following table describes each Server Administrator Change Management MIB group and lists the
MIB group number assigned to the MIB group. The Server Administrator Change Management MIB
groups are identified by the SNMP OID 1.3.6.1.4.1.674.<MIB group number> where <MIB group number>
is the MIB group number assigned to the MIB group. See the relevant section for more information about
the MIB objects defined in a MIB group.
14
Table 5. Server Administrator Change Management MIB Sections in This Guide
Section
Topics
MIB Group Number
24
Change Management Group describes the inventory data provided
by the Change Management MIB that
allows users to monitor devices and
software present on a particular
managed computer chassis
10899
Dell Remote Access Controller Out-of-Band MIB
The Dell Remote Access Controller Out-of-Band MIB (filename dellRAC.mib) provides management data
that allows you to monitor the Chassis Management Controller. This MIB also contains information on
RAC legacy alerting. The following table describes each Dell RAC Out-of-Band group and lists the MIB
group number assigned to the MIB group. See the relevant section for more information about the MIB
objects defined in a MIB group.
Table 6. Dell RAC Out-of-Band MIB
Section
Topics
MIB Group Number
25
The Dell RAC Out-of-Band MIB consists of information
for the following groups:
2
•
•
•
•
•
•
•
Product Information
Chassis Status
Chassis Power
CMC Power Information
CMC PSU Information
Chassis Alerts
Legacy Alerting
How This Guide Defines Technical Terms
The following table provides information about where to find definitions for technical terms in this
reference guide.
Table 7. Where to Find Definitions for Technical Terms
Type of Definition
See
Basic SNMP vocabulary.
Introduction
MIB-group-specific variable values. MIB-group-specific MIB
variables contain links to the tables that define these values in the
last section of the section in which these variables are used.
Sections 3, 5, 7, 8, 9, and 11
through 18.
Systems management terms, acronyms, and commonly managed
components referred to in this reference guide.
Glossary available on the Dell
Support web site at dell.com/
support/manuals.
Server Administrator-standard data types that specify variable
values in this reference guide.
Appendix A, Standard Data Type
Definitions.
15
Basic Terminology
It is important to have a good understanding of the key technical terms used in this guide. This guide
provides definitions for all essential terms used in describing the Server Administrator MIBs. For definitions
on all essential terms and acronyms, see the Glossary available on the Dell Support website at dell.com/
support/manuals.
Frequently Used Terms in Variable Names
The following terms are frequently used in the name of a MIB variable:
Capability refers to the actions an object can perform, or to actions that can be taken by the object. Hotpluggable is an example of a capability. If a card is hot-pluggable, it can be replaced while a system is
running. Capability settings refer to the capabilities of the object that the user can select from and
activate if desired. Capability settings allow users of the server administrator to predetermine how an
object behaves under specific conditions.
Settings are the conditions of a manageable object that determine what happens when a certain value is
detected in a component. For example, a user can set the upper critical threshold of a temperature probe
to 75 degrees Celsius. If the probe reaches that temperature, the setting causes an alert to be sent to the
management console. Some settings, when reached, can trigger a system shutdown or other response to
prevent damage to the system.
State refers to the condition of an object that has more than one condition. For example, an object may
be in a not ready or in an enabled state.
Status refers to the health of an object or how the object is functioning. For example, the status of a
temperature probe that is measuring acceptable temperatures would be reported as normal. When the
probe begins reading temperatures that exceed limits set by the user, it reports a critical status.
Tables
This reference guide contains two types of tables: tables that are used to organize and define variable
values and tables that define MIB objects. Readers must understand the difference between these two
types of tables.
SNMP Tables
Most of the MIB objects defined in this reference guide are organized into SNMP tables. SNMP tables
organize data into two-dimensional structural arrays. In SNMP, objects that have a relationship to other
objects are called columnar objects. Columnar objects are objects used to form lists and tables. When a
MIB group is divided into one or more discrete tables, the word table has a technical meaning. An
example is the section of this reference guide entitled Universal Unique Identifier (UUID). The UUID object
has a type and a value that uniquely identifies an object such as a chassis. The table defines all of the
variables that comprise the managed object UUID.
The following table is an example of an SNMP table. The table contains variables that must occur in a
definite sequence. In the example table the defined variables are UUID Chassis Index, UUID Index, UUID
Type, and UUID Value.
These objects comprise the Server Administrator definitions for the UUID.
16
Table 8. UUID Table
Name
uUIDTable
Object ID
1.3.6.1.4.1.674.10892.1.300.20
Description
Defines the UUID table.
Syntax
SEQUENCE OF UUIDTableEntry
Access
Not accessible
Table 9. UUID Table Entry
Name
uUIDTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1
Description
Defines the UUID table entry.
Syntax
UUIDTableEntry
Access
Not accessible
Index
uUIDIndex
,
uUIDchassisIndex
Table 10. UUID Chassis Index
Name
uUIDchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 11. UUID Index
Name
uUIDIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.2
Description
Defines the index of the UUID in a specified chassis.
Syntax
DellObjectRange
Access
Read-only
Table 12. UUID Type
Name
uUIDType
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.3
Description
Defines the type of the UUID for this chassis.
Syntax
DellUUIDType
17
Access
Read-only
Table 13. UUID Value
Name
uUIDValue
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.4
Description
Defines the value of the UUID for this chassis.
Syntax
Octet String (SIZE[16])
Access Read-only
Read-only
Section Organization
Sections in this reference guide are based on the Server Administrator MIBs, so the complexity of each
section depends on the complexity of each MIB group. The first section provides a high-level
introduction to the MIB group. If the group is defined by one or more tables, the second section lists
these tables. The third section documents the variables that comprise the group, and if applicable, the
variables that comprise the tables. The fourth section contains definitions for any Server Administratorspecific variables that are used in the section. The following example shows the typical content of these
four sections:
1.
BIOS Setup Control Group — This section explains the purpose of the MIB group and summarizes
the major features of the component groups.
2.
BIOS Group Tables — If there is more than one SNMP table for a group, this section lists all of the
tables. For this BIOS group example, there are eight tables listed. In each section, double-clicking
any table on the list takes you to that table.
– BIOS Setup Control Table
– SCSI Control Table
– Parallel Port Control Table
– Serial Port Control Table
– USB Control Table
– IDE Control Table
– Diskette Control Table
– Network Interface Control Table
3.
Variables that make up each table in the group — This section documents the variables for the eight
tables that comprise the BIOS group.
4.
BIOS Variable Values — This section explains any Server Administrator-specific variables and data
types that are used in this section. In the BIOS group example, there are 17 unique, Server
Administrator-specific variable meanings. Information on each Server Administrator-specific variable
is presented in a formatted table.
Other Documents You May Need
In addition to this guide, you can access the following guides available on the Dell Support website at
dell.com/support/manuals. On the Manuals page, click Software Systems Management. Click the
appropriate product link on the right-side to access the documents.
•
18
The Server Administrator Messages Reference Guide lists the messages that you can receive on your
systems management console or on your operating system’s event viewer. This guide explains the
text, severity, and cause of each message that the server administrator issues.
•
The Server Administrator CIM Reference Guide documents the Common Information Model (CIM)
provider, an extension of the standard management object format (MOF) file. The ServerAdministrator CIM provider documents supported classes of management objects.
•
The Glossary provides information on the terms used in this document.
Introduction to the Server Administrator SNMP Subagent
This guide provides formatted information drawn primarily from the MIB files written for the Server
Administrator services that support the SNMP protocol.
For each of the variables defined in the MIBs, the following fields are specified:
•
Variable name
•
OID or unique identifying number
•
Description
•
Data type of the variable (for example: integer, string, octet string)
•
Whether the variable is accessible, not accessible, or read-only
•
Index or indexes, if applicable
For each MIB group that has unique variable definitions, tables are included in the last section of the
section to explain the meaning of the terms.
Standards for writing MIBs are defined by the Internet Engineering Task Force (IETF). Structure of
Management Information (SMI) is a standard that specifies the rules for defining the structure and type of
managed objects and events in a MIB. SMIv1 is specified in Request For Comments (RFC) 1155. The Server
Administrator MIB conforms to the SMIv1 standard.
SNMP is a systems management standard originally designed for network management. SNMP manages
much more than networks. Information Technology (IT) professionals use SNMP for monitoring and
managing computer systems and the various components and peripherals supported by their systems.
SNMP standards are defined by the Internet Engineering Task Force (IETF). SNMP version 1 was published
in August 1988 and is the most commonly supported version of SNMP. SNMP version 2 was first
published in May 1993, but has not gained widespread market acceptance. SNMP version 3 was recently
completed and has addressed security issues that exist in version 1.
All SNMP systems consist of one or more managed systems that provide data through an SNMP agent to
a management system. The management system provides a user interface to view data from the
managed systems. The management system and managed systems communicate over a network
(typically through User Datagram Protocol/Internet Protocol [UDP/IP]).
The management system and a managed system communicate by means of a common data schema.
SNMP MIB files define the structure, type, and values of the SNMP data. While MIBs can be standardized
or enterprise specific, most operating systems supply SNMP agents for the standard MIB-I and MIB-II
schemas. MIB-I defines a base set of standard management information for systems implementing the
Internet Protocol (IP) suite. MIB-II defines characteristics of the system, characteristics of network
interfaces, and characteristics of components of the IP on the system. In addition to the standard MIBs,
many hardware vendors have defined MIBs that provide management data specific to their systems and
peripheral devices.
Monitored data can be retrieved through SNMP using the Get command. Typically, this command
requires the host name or IP address of the target machine as well as the OID of the data to retrieve.
Exact details are dependent on the operating system and the development tools being used to create the
management application. The Get command has a variant known as GetNext.
19
Management Information Base Object Identifiers
Each data class within a Management Information Base (MIB) is defined by an Object Identifier (OID).
OIDs are unique across all MIBs. An OID consists of a series of digits separated by periods. The OID
functions in a similar fashion to a phone number. The phone number 011-512-471-0000 uniquely
identifies a single phone. The phone number can be broken down into a number of components to
uniquely identify a phone. The first component, 011, is the country code for the United States. The
second component, 512, identifies the area code for central Texas. The third component, 471, is the
phone exchange for a large state university in the city of Austin. The final component, 0000, is the main
switchboard.
There are two main differences between the phone number example and an actual OID. The first
difference is that there are many more components in an OID, up to 128. The combination of these
components is called an OID prefix. The second difference is that OIDs support the concept of indexes or
keys. The OID prefix specifies the data class but does not specify an instance of the data within the class.
Indexes can be used to identify the instances of a data class. These indexes are referred to as the OID
suffix.
The assignment of values for each OID prefix component can be illustrated by using a tree structure. The
following is an example of an OID assignment:
Table 14. ROOT
CCITT(0)
ISO(1)
ORG(3)
DOD(6)
INTERNET(1)
MGMT(2)
MIB(1)
EXPERIMENT
AL(3)
PRIVATE(4)
ENTERPRISE
S(1)
DELL (674)
SNMPv2(6)
In the preceding example, the OID prefix for the Dell enterprise would be 1.3.6.1.4.1.674.
The numbers in boldface type show the categories and numbers that apply to Server Administrator. All
Server Administrator-defined OIDs consist of 1.3.6.1.4.1.674 followed by additional component values.
SNMP Security
SNMP version 1 has a very limited security mechanism. SNMP agents support the use of a community
string, which is configured at each SNMP agent and is passed as a part of all SNMP request messages.
There is no verification that the requester is actually a member of the specified community. As most
20
system and network management data is not confidential, this limited security is acceptable for Get types
of requests. On the other hand, this security is not acceptable for Set types of operations where an SNMP
request could power off a system, reconfigure a redundant array of independent disks (RAID) card, and so
on. Dell has chosen not to support SNMP Set operations for this reason.
NOTE: The default SNMP agent configuration usually includes a SNMP community name such as
public. For security reasons, change the SNMP community names from their default values. For
information about changing SNMP community names, see the Dell OpenManage Server
Administrator User’s Guide available on the Dell Support website at dell.com/openmanagemanuals.
NOTE: As of iDRAC7 firmware release r1.30.30, iDRAC7 supports SNMP query operations (GET,
GETNEXT, GETBULK) via the SNMPv3 protocol, in addition to supporting query operations via the
SNMP v1 and SNMP v2c protocols. More specifically, iDRAC7 now supports the SNMP User Security
Model (USM).
SNMP Traps
SNMP is frequently used to monitor systems for fault conditions such as temperature violations, hard
drive failures, and so on. Management applications can monitor for these conditions by polling the
appropriate OIDs with the Get command and analyzing the returned data. This method has its drawbacks.
If it is done frequently, significant amounts of network bandwidth can be consumed. If it is done
infrequently, the response to the fault condition may not occur in a timely fashion. SNMP traps avoid
these limitations of the polling method.
An SNMP trap is an asynchronous event indicating that something significant has occurred. This is
analogous to a pager receiving an important message, except that the SNMP trap frequently contains all
the information needed to diagnose a fault.
Two drawbacks to SNMP traps are that they are sent using UDP, which is not a guaranteed delivery
mechanism, and that they are not acknowledged by the receiver.
An SNMP trap message contains the trap’s enterprise OID, the agent IP address, a generic trap ID, the
specific trap ID, a time stamp, and zero or more variable bindings (varbinds). The combination of an
enterprise OID and a specific trap ID uniquely identifies each Server Administrator-defined trap. A varbind
consists of an OID and its value and provides additional information about the trap.
In order for a management system to receive SNMP traps from a managed system, the node must be
configured to send traps to the management system. Trap destination configuration is dependent on the
operating system. When this configuration is done, a management application on the management
system can wait for traps and act on them when received.
For a list of traps supported by the Server Administrator Instrumentation Service, see Instrumentation
Traps. For information on Server Administrator Storage Management traps, see Storage Management
Alert Reference.
For a list of traps supported by the Remote Access Controller, see RAC Traps, BMC Traps and iDRAC7
Traps.
21
22
Server Administrator Group
2
The Server Administrator group comprises of the following sections:
•
Instrumentation MIB Version Group
•
Systems Management Software Group
•
System State Group
•
Chassis Information Group
•
Operating System Group
•
System Resource Group
•
Power Group
•
Thermal Group
•
Remote Flash BIOS Group
•
Port Group
•
Device Group
•
Slot Group
•
Memory Group
•
BIOS Setup Control Group
•
Local Response Agent Group
•
Cost of Ownership Group
•
Remote Access Group
•
Cluster Group
•
Baseboard Management Controller Group
•
Field Replaceable Unit Group
Instrumentation MIB Version Group
The Instrumentation Management Information Base (MIB) Version Group defines the attributes that
identify the version of the Instrumentation MIB supported by the systems management software.
The mIBMajorVersionNumber, mIBMinorVersionNumber, and mIBMaintenanceVersionNumber attributes
are scalar objects, meaning that they are not related to other MIB objects and are thus not placed in a
table.
Management Information Base Major Version Number
Name
mIBMajorVersionNumber
Object ID
1.3.6.1.4.1.674.10892.1.1.1.0
23
Description
Defines the major version number of the version of this MIB supported
by the systems management software. For example, if the MIB version is
1.2.3, the major version number is 1.
A major version number change indicates a major change in object
functionality.
Syntax
DellUnsigned8BitRange
Access
Read-only
Management Information Base Minor Version Number
Name
mIBMinorVersionNumber
Object ID
1.3.6.1.4.1.674.10892.1.1.2.0
Description
Defines the minor version number of the version of this MIB supported
by the systems management software. For example, if the MIB version is
1.2.3, the minor version number is 2.
A minor revision provides additional support for new objects as well as
problem fixes.
Syntax
DellUnsigned8BitRange
Access
Read-only
Management Information Base Maintenance Version Number
Name
mIBMaintenanceVersionNumber
Object ID
1.3.6.1.4.1.674.10892.1.1.3.0
Description
Defines the maintenance version number for the version of this MIB
supported by the systems management software. For example, if the
MIB version is 1.2.3, the maintenance version number is 3.
Syntax
DellUnsigned8BitRange
Access
Read-only
Systems Management Software Group
The Systems Management Software Group allows users to see information about the standards and
software that are supported by the agent of a particular managed computer chassis. The Systems
Management Software Group classifies each computer chassis according to the systems management
standard that the agent supports.
Additional objects define the universal resource locator (URL) of the systems management software and
the language in which systems management information displays. Defining these objects enables users to
manage a system using an internet browser. You can access Server Administrator using the secure
hypertext transfer protocol (https) and a pre-assigned port number of 1311, or you can specify a port
number of your own choosing.
NOTE: Using the Software → Server Preferences menu of Server Administrator, you can bind to
either one IP address or to all IP addresses.
24
To manage a system locally using Server Administrator, type the following in the address field of your
browser: https://localhost:<1311 or user-specified port number>
To manage a system remotely using Server Administrator, type one of the following in the address field of
your browser:
https://<systemname>:<1311 or user specified port number> or https://<IP address>:<1311 or user
specified port number>
Systems Management Software
The following objects describe the fields for server administrator systems management information. The
systems management software variables are scalar objects, meaning that they are not related to other
management information base (MIB) objects and are thus not placed in a table.
Table 15. Systems Management Software Name
Name
systemManagementSoftwareName
Object ID
1.3.6.1.4.1.674.10892.1.100.1
Description
Defines the systems management software product name.
Syntax
DellString
Access
Read-only
Table 16. Systems Management Software Version Number Name
Name
systemManagementSoftwareVersionNumberName
Object ID
1.3.6.1.4.1.674.10892.1.100.2
Description
Defines the version number of the systems management software.
Syntax
DellString
Access
Read-only
Table 17. Systems Management Software Build Number
Name
systemManagementSoftwareBuildNumber
Object ID
1.3.6.1.4.1.674.10892.1.100.3
Description
Defines the build number of the systems management software.
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 18. Systems Management Software Description Name
Name
systemManagementSoftwareDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.100.4
Description
Defines the description of the systems management software.
Syntax
DellString
Access
Read-only
25
Table 19. Systems Management Software Supported Protocol
Name
systemManagementSoftwareSupportedProtocol
Object ID
1.3.6.1.4.1.674.10892.1.100.5
Description
Defines the systems management standards (SNMP or CIM) supported
by the systems management software.
Syntax
SMSSupportedTypes (Systems Management Software Supported
Standards)
Access
Read-only
Table 20. Systems Management Software Preferred Protocol
Name
systemManagementSoftwarePreferredProtocol
Object ID
1.3.6.1.4.1.674.10892.1.100.6
Description
Defines the preferred systems management standard for the systems
management software.
Syntax
SMSSupportedTypes (Systems Management Software Supported
Standards)
Access
Read-only
Table 21. Systems Management Software Update Level Name
Name
systemManagementSoftwareUpdateLevelName
Object ID
1.3.6.1.4.1.674.10892.1.100.7
Description
Defines the update level of the system management software.
Syntax
DellString
Access
Read-only
Table 22. Systems Management Software URL Name
Name
systemManagementSoftwareURLName
Object ID
1.3.6.1.4.1.674.10892.1.100.8
Description
Defines the universal resource locator (URL) of the systems
management software.
Syntax
DisplayString (SIZE (0..1024))
Access
Read-only
Table 23. Systems Management Software Language Name
Name
systemManagementSoftwareLanguageName
Object ID
1.3.6.1.4.1.674.10892.1.100.9
Description
Defines the language of the systems management software.
Syntax
DisplayString (SIZE (0..255))
Access
Read-only
26
Table 24. Systems Management Software Global Version Name
Name
systemManagementSoftwareGlobalVersionName
Object ID
1.3.6.1.4.1.674.10892.1.100.10
Description
Defines the global version of the systems management software.
Syntax
DellString
Access
Read-only
Table 25. Systems Management Software Feature Flags
Name
systemManagementSoftwareFeatureFlags
Object ID
1.3.6.1.4.1.674.10892.1.100.11
Description
Defines the features of the systems management software.
Syntax
SMSFeatureFlags (Systems Management Software Feature Flags)
Access
Read-only
Table 26. Systems Management Software SNMP Agent Feature Flags
Name
systemManagementSoftwareSNMPAgentFeatureFlags
Object ID
1.3.6.1.4.1.674.10892.1.100.12
Description
Defines the features of the SNMP agent software provided by the
operating system.
Syntax
SMSSNMPAgentFeatureFlags (Systems Management Software SNMP
Agent Feature Flags)
Access
Read-only
Table 27. Systems Management Software Manufacturer Name
Name
systemManagementSoftwareManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.100.13
Description
Defines the manufacturer of the systems management software.
Syntax
DellString
Access
Read-only
Systems Management Software Variable Values
This section includes definitions of server administrator-specific variable values used in this section.
Table 28. Systems Management Software Supported Standards
Variable Name: SMSSupportedTypes
Data Type: Integer
Possible Data Values
Meaning of Data Value
supportsSNMP(1)
This system supports SNMP.
supportsDMI(2)
This system supports DMI.
27
supportsSNMPandDMI(3)
This system supports SNMP and DMI.
supportsCIMOM(4)
This system supports CIM.
supportsSNMPandCIMOM(5
)
This system supports SNMP and CIM.
Table 29. Systems Management Software Feature Flags
Variable Name: SMSFeatureFlags .
Data Type: Integer
Possible Data Values
Meaning of Data Value
none(0)
The Systems Management Software features are not enabled.
webOneToOneManagementP
referred(1)
The web 1:1 management preferred feature is enabled
Table 30. Systems Management Software SNMP Agent Feature Flags
Variable Name: SMSSNMPAgentFeatureFlags
Data Type: Integer
Possible Data Values
Meaning of Data Value
none(0)
The Systems Management Software SNMP agent features are not
enabled.
supportsSparseTables(1
)
The SNMP agent supports sparse tables.
System State Group
The Management Information Base (MIB) variables presented in this section enable you to track various
attributes that describe the state of the critical components supported by your system. Components
monitored under the System State Group include power supplies, AC power cords, AC power switches,
and cooling devices, as well as temperature, fan, amperage, and voltage probes.
System State Group Table
The System State Group defines objects in the System State MIB table.
System State Table
The systemStateGlobalSystemStatus variable provides overall system health status and includes rolledup (that is, worst) status for Instrumentation and Storage. This variable monitors the overall system health
status. It reflects changes to systemStateChassisStatus variable, which represents Instrumentation health
status and agentGlobalSystemStatus (dcstorag.mib), which represents Storage health status.
The systemStateChassisStatus variable provides the rolled-up health status for the subsystems
associated with the chassis that is represented by the row in the systemStateTable. Changes to the
variables in List 1, each of which indicates the rolled-up health status of all the components of the
corresponding subsystem, are reflected in systemStateChassisStatus variable.
28
For example, systemStatePowerSupplyStatusCombined provides the rolled up status of all power
supplies for the chassis.
The variables in List 2 provide the health status of each component of the corresponding subsystem.
Each octet of the value represents a component. If a power supply fails, the corresponding entry in
systemStatePowerSupplyStatusDetails, systemStatePowerSupplyStatusCombined,
systemStateChassisStatus and systemStateGlobalSystemStatus transitions to critical.
List 1
Variables that provide rolled-up health status for all components in associated subsystem in chassis:
•
systemStatePowerSupplyStatusCombined
•
systemStateVoltageStatusCombined
•
systemStateAmperageStatusCombined
•
systemStateCoolingDeviceStatusCombined
•
systemStateTemperatureStatusCombined
•
systemStateMemoryDeviceStatusCombined
•
systemStateChassisIntrusionStatusCombined
•
systemStateACPowerCordStatusCombined
•
systemStateEventLogStatus
•
systemStatePowerUnitStatusCombined
•
systemStateCoolingUnitStatusCombined
•
systemStateACPowerSwitchStatusCombined
•
systemStateRedundantMemoryUnitStatusCombined
•
systemStateProcessorDeviceStatusCombined
•
systemStateBatteryStatusCombined
•
systemStateSDCardUnitStatusCombined
•
systemStateSDCardDeviceStatusCombined
List 2
Variables that provide health status of each component in associated subsystem in chassis:
•
systemStatePowerSupplyStatusDetails
•
systemStateVoltageStatusDetails
•
systemStateAmperageStatusDetails
•
systemStateCoolingDeviceStatusDetails
•
systemStateTemperatureStatusDetails
•
systemStateMemoryDeviceStatusDetails
•
systemStateChassisIntrusionStatusDetails
•
systemStateACPowerCordStatusDetails
•
systemStatePowerUnitStatusList
•
systemStateCoolingUnitStatusList
•
systemStateACPowerSwitchStatusList
•
systemStateRedundantMemoryUnitStatusList
•
systemStateProcessorDeviceStatusList
•
systemStateBatteryStatusList
29
•
systemStateSDCardUnitStatusList
•
systemStateSDCardDeviceStatusList
System State Table
The following object sets up the System State Table:
Table 31. System State Table
Name
systemStateTable
Object ID
1.3.6.1.4.1.674.10892.1.200.10
Description
Defines the System State Table.
Syntax
SEQUENCE OF SystemStateTableEntry
Access
Not accessible
Table 32. System State Table Entry
Name
systemStateTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1
Description
Defines the System State Table entry.
Syntax
SystemStateTableEntry
Access
Not accessible
Index
systemStatechassisIndex
Table 33. System State Chassis Index
Name
systemStatechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 34. System State Global System Status
Name
systemStateGlobalSystemStatus
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.2
Description
Defines the global system status of all chassis being monitored by this
instrumentation instance.
Syntax
DellStatus
Access
Read-only
30
Table 35. System State Chassis State
Name
systemStateChassisState
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.3
Description
Defines the system state of this chassis.
Syntax
DellStateSettings
Access
Read-only
Table 36. System State Chassis Status
Name
systemStateChassisStatus
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.4
Description
Defines the system status of this chassis.
Syntax
DellStatus
Access
Read-only
Table 37. System State Power Unit State Details
Name
systemStatePowerUnitStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.5
Description
Defines the state of all power units in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the state of a specific power unit. The first byte returned represents the
state of the first power unit, the second byte returned represents the
state of the second power unit, and so on. The bytes have the same
definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 38. System State Power Unit Status Redundancy
Name
systemStatePowerUnitStatusRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.6
Description
Defines the system status of the power unit(s) in this chassis.
Syntax
DellStatus
Access
Read-only
Table 39. System State Power Unit Status Details
Name
systemStatePowerUnitStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.7
31
Description
Defines the status of all power units in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the status of a specific power unit. The first byte returned represents the
status of the first power unit, the second byte returned represents the
status of the second power unit, and so on. The bytes have the same
definition type as DellStatusRedundancy.
Syntax
Octet String
Access
Read-only
Table 40. System State Power Supply State Details
Name
systemStatePowerSupplyStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.8
Description
Defines the state of all power supplies in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the state of a specific power supply. The first byte returned represents
the state of the first power supply, the second byte returned represents
the state of the second power supply, and so on. The bytes have the
same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 41. System State Power Supply Status Combined
Name
systemStatePowerSupplyStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.9
Description
Defines the status of all power supplies in this chassis.
Syntax
DellStatus
Access
Read-only
Table 42. System State Power Supply Status Details
Name
systemStatePowerSupplyStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.10
Description
Defines the status of all power supplies in this chassis. The results are
returned as a binary octet string, Each byte of the octet string represents
the status of a specific power supply. The first byte returned represents
the status of the first power supply, the second byte returned represents
the status of the second power supply, and so on. The bytes have the
same definition type as DellStatus.
Syntax
Octet String (Size (1..128))
Access
Read-only
32
Table 43. System State Voltage State Details
Name
systemStateVoltageStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.11
Description
Defines the state of all voltage probes in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the status of a specific voltage probe. The first byte returned represents
the status of the first voltage probe, the second byte returned represents
the status of the second voltage probe, and so on. The bytes have the
same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 44. System State Voltage Status Combined
Name
systemStateVoltageStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.12
Description
Defines the status of all voltage probes in this chassis.
Syntax
DellStatus
Access
Read-only
Table 45. System State Voltage Status Details
Name
systemStateVoltageStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.13
Description
Defines the status of all voltage probes in this chassis.
Syntax
Octet String
Access
Read-only
Table 46. System State Amperage State Details
Name
systemStateAmperageStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.14
Description
Defines the state of all current probes in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the status of a specific current probe. The first byte returned represents
the state of the first current probe, the second byte returned represents
the state of the second current probe, and so on. The bytes have the
same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
33
Table 47. System State Amperage Status Combined
Name
systemStateAmperageStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.15
Description
Defines the status of all amperage probes in this chassis. The result is
returned as a combined status value. The value has the same definition
type as DellStatus.
Syntax
DellStatus
Access
Read-only
Table 48. System State Amperage Status Details
Name
systemStateAmperageStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.16
Description
Defines the status of all amperage probes in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the status of a specific amperage probe. The first byte returned
represents the status of the first amperage probe, the second byte
returned represents the status of the second amperage probe, and so
on. The bytes have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 49. System State Cooling Unit State Details
Name
statesystemStateCoolingUnitStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.17
Description
Defines the state of all cooling units in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the state of a specific cooling unit. The first byte returned represents the
state of the first cooling unit, the second byte returned represents the
state of the second cooling unit, and so on. The bytes have the same
definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 50. System State Cooling Unit Status Redundancy
Name
systemStateCoolingUnitStatusRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.18
Description
Defines the state of all cooling units in this chassis.
Syntax
DellStatusRedundancy
34
Access
Read-only
Table 51. System State Cooling Unit State Details
Name
systemStateCoolingUnitstateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.19
Description
Defines the state of all cooling units in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the state of a specific cooling unit. The first byte returned represents the
state of the first cooling unit, the second byte returned represents the
state of the second cooling unit, and so on. The bytes have the same
definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 52. System State Cooling Device State Details
Name
systemStateCoolingDeviceStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.20
Description
Defines the state of all cooling devices in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the state of a specific cooling device. The first byte returned represents
the state of the first cooling device, the second byte returned represents
the state of the second cooling device, and so on. The bytes have the
same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 53. System State Cooling Device Status Combined
Name
systemStateCoolingDeviceStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.21
Description
This attribute defines the cooling device status of all cooling devices in
this chassis. The results is returned as a combined status value. The
value has the same definition type as DellStatus.
Syntax
DellStatus
Access
Read-only
Table 54. System State Cooling Device Status Details
Name
systemStateCoolingDeviceStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.22
Description
Defines the status of all cooling devices in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
35
the status of a specific cooling device. The first byte returned represents
the status of the first cooling device, the second byte returned
represents the status of the second cooling device, and so on. The bytes
have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 55. System State Temperature State Details
Name
systemStateTemperatureStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.23
Description
Defines the state of all temperature probes in this chassis. The results
are returned as a binary octet string. Each byte of the octet string
represents the state of a specific temperature probe. The first byte
returned represents the state of the first temperature probe, the second
byte returned represents the status of the second temperature probe,
and so on. The bytes have the same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 56. System State Temperature Status Combined
Name
systemStateTemperatureStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.24
Description
Defines the status of all temperature probes in this chassis. The result is
returned as a combined status value. The value has the same definition
type as DellStatus.
Syntax
DellStatus
Access
Read-only
Table 57. System State Temperature Status Details
Name
systemStateTemperatureStatusDetailsly
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.25
Description
Defines the status of all temperature probes in this chassis. The first byte
returned represents the status of the first temperature probe, the
second byte returned represents the status of the second temperature
probe, and so on.
Syntax
Octet String
Access
Read-only
36
Table 58. System State Memory Device State Details
Name
systemStateMemoryDeviceStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.26
Description
Defines the state of all memory devices in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the state of the specific memory device. The first byte returned
represents the state of the first memory device, the second byte
returned represents the status of the second memory device, and so on.
The bytes have the same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 59. System State Memory Device Status Combined
Name
systemStateMemoryDeviceStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.27
Description
Defines the status of all memory devices in this chassis.
Syntax
DellStatus
Access
Read-only
Table 60. System State Memory Device Status Details
Name
systemStateMemoryDeviceStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.28
Description
Defines the status of all memory devices in this chassis. The results are
returned as a binary octet string. Each byte of the octet string represents
the status of a specific memory device. The first byte returned
represents the status of the first memory device, the second byte
returned represents the status of the second memory device, and so on.
The bytes have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 61. System State Chassis Intrusion State Details
Name
systemStateChassisIntrusionStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.29
Description
Defines the intrusion state of all intrusion detection devices in this
chassis. The results are returned as a binary octet string. Each byte of
the octet string represents the status of a specific intrusion detection
device. The first byte returned represents the status of the first intrusion
detection device, the second byte returned represents the status of the
37
second intrusion detection device, and so on. The bytes have the same
definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 62. System State Chassis Intrusion Status Combined
Name
systemStateChassisIntrusionStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.30
Description
Defines the intrusion status of all intrusion detection devices in this
chassis. The result is returned as a combined status value. The value has
the same definition type as DellStatus.
Syntax
DellStatus
Access
Read-only
Table 63. System State Chassis Intrusion Status Details
Name
systemStateChassisIntrusionStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.31
Description
Defines the intrusion status of all intrusion detection devices in this
chassis. The first byte returned represents the status of the first intrusion
detection device, the second byte returned represents the status of the
second intrusion detection device, and so on.
Syntax
Octet String
Access
Read-only
Table 64. System State AC Power Switch State Details
Name
systemStateACPowerSwitchStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.32
Description
Defines the individual state of all AC power switches in this chassis. The
first byte returned represents the state of the first AC power switch, the
second byte returned represents the state of the second AC power
switch, and so on.
Syntax
Octet String
Access
Read-only
Table 65. System State AC Power Switch Status Redundancy
Name
systemStateACPowerSwitchStatusRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.33
Description
Defines the overall redundancy status of the AC power switches in this
chassis.
38
Syntax
DellStatusRedundancy
Access
Read-only
Table 66. System State AC Power Switch Status Details
Name
systemStateACPowerSwitchStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.34
Description
Defines the individual status of all AC power switches in this chassis. The
first byte returned represents the status of the first AC power switch, the
second byte returned represents the status of the second AC power
switch, and so on.
Syntax
Octet String
Access
Read-only
Table 67. System State AC Power Cord State Details
Name
systemStateACPowerCordStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.35
Description
Defines the individual state of all AC power cords for any AC power
switches in this chassis. The first byte returned represents the state of
the first AC power cord, the second byte returned represents the state
of the second AC power cord, and so on.
Syntax
Octet String
Access
Read-only
Table 68. System State AC Power Cord Status Combined
Name
systemStateACPowerCordStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.36
Description
Defines the overall status of all AC power cords for any AC power
switches in this chassis.
Syntax
DellStatus
Access
Read-only
Table 69. System State AC Power Cord Status Details
Name
systemStateACPowerCordStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.37
Description
Defines the individual status of all AC power cords for any AC power
switches in this chassis. The first byte returned represents the status of
the first AC power cord, the second byte returned represents the status
of the second AC power cord, and so on.
Syntax
Octet String
39
Access
Read-only
Table 70. System State Redundant Memory Unit State Details
Name
systemStateRedundantMemoryUnitStateDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.38
Description
Defines the state of all redundant memory units in this chassis. The
results are returned as a binary octet string, each byte of the octet string
represents the state of the specific object. The first byte returned
represents the state of the first object, and so on. The bytes have the
same definition type as DellStateSettings.
Syntax
Octet String
Access
Read-only
Table 71. System State Redundant Memory Unit Status Redundancy
Name
systemStateRedundantMemoryUnitStatusRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.39
Description
Defines the overall redundancy status for redundant memory.
Syntax
DellStatusRedundancy
Access
Read-only
Table 72. System State Redundant Memory Unit Status Details
Name
systemStateRedundantMemoryUnitStatusDetails
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.40
Description
Defines the status of all redundant memory units in this chassis. The
results are returned as a binary octet string, each byte of the octet string
represents the status of the specific object. The first byte returned
represents the status of the first object, and so on. The bytes have the
same definition type as DellStatusRedundancy.
Syntax
Octet String
Access
Read-only
Table 73. System State Event Log Status
Name
systemStateEventLogStatus
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.41
Description
Defines the overall status of this chassis (ESM) event log.
Syntax
DellStatus
Access
Read-only
40
Table 74. System State Power Unit Status Combined
Name
systemStatePowerUnitStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.42
Description
Defines the combined status of all power units of this chassis.
Syntax
DellStatus
Access
Read-only
Table 75. System State Power Unit Status List
Name
systemStatePowerUnitStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.43
Description
Lists the status of each power unit of this chassis. The results are
returned as a binary octet string where each byte of the octet string
represents the status of a power unit. The first byte returned represents
the status of the first power unit, and so on. The bytes have the same
definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 76. System State Cooling Unit Status Combined
Name
systemStateCoolingUnitStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.44
Description
Defines the combined status of all cooling units of this chassis.
Syntax
DellStatus
Access
Read-only
Table 77. System State Cooling Unit Status List
Name
systemStateCoolingUnitStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.45
Description
Lists the status of each cooling unit of this chassis. The results are
returned as a binary octet string where each byte of the octet string
represents the status of a cooling unit. The first byte returned represents
the status of the first cooling unit, and so on. The bytes have the same
definition type as DellStatus.
Syntax
Octet String
Access
Read-only
41
Table 78. System State AC Power Switch Status Combined
Name
systemStateACPowerSwitchStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.46
Description
Defines the combined status of all AC power switches of this chassis.
Syntax
DellStatus
Access
Read-only
Table 79. System State AC Power Switch Status List
Name
systemStateACPowerSwitchStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.47
Description
Lists the status of each AC power switch of this chassis. The results are
returned as a binary octet string where each byte of the octet string
represents the status of an AC power switch. The first byte returned
represents the status of the first AC power switch, and so on. The bytes
have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 80. System State Redundant Memory Unit Status Combined
Name
systemStateRedundantMemoryUnitStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.48
Description
Defines the combined status of all redundant memory units of this
chassis.
Syntax
DellStatus
Access
Read-only
Table 81. System State Redundant Memory Unit Status List
Name
systemStateRedundantMemoryUnitStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.49
Description
Lists the status of each redundant memory unit of this chassis. The
results are returned as a binary octet string where each byte of the octet
string represents the status of a redundant memory unit. The first byte
returned represents the status of the first redundant memory unit, and
so on. The bytes have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
42
Table 82. System State Processor Device Status Combined
Name
systemStateProcessorDeviceStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.50
Description
Defines the combined status of all processor devices of this chassis.
Syntax
DellStatus
Access
Read-only
Table 83. System State Processor Device Status List
Name
systemStateProcessorDeviceStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.51
Description
Lists the status of each processor device of this chassis. The results are
returned as a binary octet string where each byte of the octet string
represents the status of a processor device. The first byte returned
represents the status of the first processor device, and so on. The bytes
have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 84. System State Battery Status Combined
Name
systemStateBatteryStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.52
Description
Defines the combined status of all batteries of this chassis.
Syntax
DellStatus
Access
Read-only
Table 85. System State Battery Status List
Name
systemStateBatteryStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.53
Description
Lists the status of each battery of this chassis. The results are returned as
a binary octet string where each byte of the octet string represents the
status of a battery. The first byte returned represents the status of the
first battery, and so on. The bytes have the same definition type as
DellStatus.
Syntax
Octet String
Access
Read-only
43
Table 86. System State SD Card Unit Status Combined
Name
systemStateSDCardUnitStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.54
Description
Defines the combined status of all SD Card units of this chassis.
Syntax
DellStatus
Access
Read-only
Table 87. System State SD Card Unit Status List
Name
systemStateSDCardUnitStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.55
Description
Lists the status of each SD Card unit of this chassis. The results are
returned as a binary octet string where each byte of the octet string
represents the status of a SD Card unit. The first byte returned
represents the status of the first SD Card unit, and so on. The bytes have
the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Table 88. System State SD Card Device Status Combined
Name
systemStateSDCardDeviceStatusCombined
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.56
Description
Defines the combined status of all SD Card devices of this chassis.
Syntax
DellStatus
Access
Read-only
Table 89. System State SD Card Device Status List
Name
systemStateSDCardDeviceStatusList
Object ID
1.3.6.1.4.1.674.10892.1.200.10.1.57
Description
Lists the status of each SD Card device of this chassis. The results are
returned as a binary octet string where each byte of the octet string
represents the status of a SD Card device. The first byte returned
represents the status of the first SD Card device, and so on. The bytes
have the same definition type as DellStatus.
Syntax
Octet String
Access
Read-only
Chassis Information Group
The Chassis Information Group provides information about the type or types of chassis in your system, as
well as information about the light-emitting diode (LED) indicators and settings for devices on each
44
chassis. Information is also available about the current date and time displayed on the chassis, intrusion
warnings, watchdog timer, systems management basic input/output system (SMBIOS), and so on.
Chassis Information Group Tables
The following management information base (MIB) tables define the objects in the Chassis Information
Group:
•
Chassis Information Table
•
UUID Table
•
POST Log Table
•
Event Log Table
•
System BIOS Table
•
Firmware Table
•
Intrusion Table
•
Baseboard Table
Chassis Information Table
The following object sets up the Chassis Information Table.
Table 90. Chassis Information Table
Name
chassisInformationTable
Object ID
1.3.6.1.4.1.674.10892.1.300.10
Description
Defines the chassis information table.
Syntax
SEQUENCE OF ChassisInformationTableEntry
Access
Not accessible
Table 91. Chassis Information Table Entry
Name
chassisInformationTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1
Description
Defines the chassis information table entry.
Syntax
ChassisInformationTableEntry
Access
Not accessible
Index
chassisIndexChassisInformation
Table 92. Chassis Index Chassis Information
Name
chassisIndexChassisInformation
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.1
Description
Defines the index (one-based) of this chassis. The first chassis is
numbered one.
Syntax
DellObjectRange
Access
Read-only
45
Table 93. Chassis State Capabilities
Name
chassisStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.2
Description
Defines the capabilities of the chassis.
Syntax
DellStateCapabilities
Access
Read-only
Table 94. Chassis State Settings
Name
chassisStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.3
Description
Defines the state settings for the chassis.
Syntax
DellStateSettings
Access
Read-only
Table 95. Chassis Status
Name
chassisStatus
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.4
Description
Defines the status of the chassis.
Syntax
DellStatus
Access
Read-only
Table 96. Chassis Parent Index Reference
Name
chassisparentIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.4
Description
Defines the index (one-based) of the parent chassis of this chassis, if
any. A zero (0) means that this chassis is the parent of all other chassis
managed by the Server Administrator.
Syntax
DellObjectRange
Access
Read-only
Table 97. Chassis Type
Name
chassisType
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.6
Description
Defines the chassis type.
Syntax
DellChassisType (See Chassis Type)
Access
Read-only
46
Table 98. Chassis Name
Name
chassisName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.7
Description
Defines the user-assigned chassis name of the chassis.
Syntax
DellString
Access
Read-only
Table 99. Chassis Manufacturer Name
Name
chassisManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.8
Description
Defines the manufacturer’s name for this chassis.
Syntax
DellString
Access
Read-only
Table 100. Chassis Model Name
Name
chassisModelName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.9
Description
Defines the system model type for this chassis.
Syntax
DellString
Access
Read-only
Table 101. Chassis Asset Tag Name
Name
chassisAssetTagName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.10
Description
Defines the user-assigned asset tag name for this chassis.
Syntax
DisplayString
Access
Read-only
Table 102. Chassis Service Tag Name
Name
chassisServiceTagName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.11
Description
Defines the service tag name for this chassis.
Syntax
DisplayString
Access
Read-only
Table 103. Chassis ID
Name
chassisID
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.12
47
Description
Defines the asset tag name for this chassis.
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 104. Chassis ID Extension
Name
chassisIDExtension
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.13
Description
Defines the SMBIOS machine ID of this chassis.
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 105. Chassis System Class
Name
chassisSystemClass
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.14
Description
Defines the chassis class of this chassis.
Syntax
DellChassisSystemClass (See Chassis Type)
Access
Read-only
Table 106. Chassis System Name
Name
chassisSystemName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.15
Description
Defines the system name of this chassis.
Syntax
DellString
Access
Read-only
Table 107. Chassis System Boot Date Name
Name
chassisSystemBootDateName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.16
Description
Defines the boot time of this system.
Syntax
DellDateName
Access
Read-only
Table 108. Chassis System Date Name
Name
chassisSystemDateName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.17
Description
Defines the current time on this system.
Syntax
DellDateName
Access
Read-only
48
Table 109. Chassis System Location Name
Name
chassisSystemLocationName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.18
Description
Defines the user-assigned location for this chassis.
Syntax
DellString
Access
Read-only
Table 110. Chassis System Primary User Name
Name
chassisSystemPrimaryUserName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.19
Description
Defines the user-assigned primary user name for this chassis.
Syntax
DellString
Access
Read-only
Table 111. Chassis System User Phone Number Name
Name
chassisSystemUserPhoneNumberName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.20
Description
Defines the user-assigned phone number of the primary user of the
system.
Syntax
DellString
Access
Read-only
Table 112. Chassis Connection Status Unique
Name
chassisConnectionStatusUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.21
Description
Defines the status of the connection from the system chassis to an
expansion chassis.
Syntax
DellConnectionStatus (See Connection Status)
Access
Read-only
Table 113. Chassis Fan Control Capabilities Unique
Name
chassisFanControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.22
Description
Defines the capabilities of the fan control function in this chassis.
Syntax
DellFanControlCapabilities (See Fan Control Capabilities)
Access
Read-only
49
Table 114. Chassis Fan Control Settings Unique
Name
chassisFanControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.23
Description
Defines the readings and settings of the fan control hardware in the
chassis.
Syntax
DellFanControlSettings
Access
Read-only
Table 115. Chassis LED Control Capabilities Unique
Name
chassisLEDControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.24
Description
Defines the capabilities of the LED control function in the chassis.
Syntax
DellLEDControlCapabilities (See Front-Panel LED Control
CapabilitiesVariable)
Access
Read-only
Table 116. Chassis LED Control Settings Unique
Name
chassisLEDControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.25
Description
Defines the readings and settings of the LED control hardware in the
chassis.
Syntax
DellLEDControlSettings (See Front-Panel LED Control Settings)
Access
Read-only
Table 117. Chassis Hard-Drive (HD) Fault Clear Control Capabilities
Name
chassisHDFaultClearControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.26
Description
Specifies whether the chassis allows reset of the chassis hard-drive fault
LED.
Syntax
DellHDFaultLEDControlCapabilities (See Hard-Drive Fault LED Control
Capabilities )
Access
Read-only
Table 118. Chassis HD Fault Clear Control Settings
Name
chassisHDFaultClearControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.27
Description
Allows reset of the chassis hard-drive fault LED.
Syntax
DellHDFaultLEDControlSettings (See Hard-Drive Fault LED Control
Settings)
Access
Read-only
50
Table 119. Chassis Identify Flash Control Capabilities
Name
chassisIdentifyFlashControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.28
Description
Specifies whether the chassis front-panel LED can be set to flash.
Syntax
DellChassisIdentifyControlCapabilities (See Chassis Identification
Control Capabilities)
Access
Read-only
Table 120. Chassis Identify Flash Control Settings
Name
chassisIdentifyFlashControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.29
Description
Causes the chassis front-panel LED to flash.
Syntax
DellChassisIdentifyControlSettings (See Chassis Identification Control
Capabilities)
Access
Read-only
Table 121. Chassis Lock Present
Name
chassisLockPresent
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.30
Description
Specifies whether a chassis lock is present on the chassis.
Syntax
DellBoolean
Access
Read-only
Table 122. Chassis Host Control Capabilities Unique
Name
chassishostControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.31
Description
Defines the capabilities of the host control object.
Syntax
DellHostControlCapabilities (See Host Control Capabilities)
Access
Read-only
Table 123. Chassis Host Control Settings Unique
Name
chassishostControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.32
Description
Defines the current settings of the host control object.
Syntax
DellHostControlSettings (See Host Control Settings)
Access
Read-only
51
Table 124. Chassis Watchdog Control Capabilities Unique
Name
chassiswatchDogControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.33
Description
Defines the capabilities of the watchdog timer object.
Syntax
DellWatchDogControlCapabilities (See Watchdog Control Capabilities)
Access
Read-only
Table 125. Chassis Watchdog Control Settings Unique
Name
chassiswatchDogControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.34
Description
Defines the current settings and the values allowed to be set for the
watchdog timer object.
Syntax
DellWatchDogControlCapabilities (See Watchdog Control Capabilities)
Access
Read-only
Table 126. Chassis Watchdog Control Expiry Time Capabilities Unique
Name
chassiswatchDogControlExpiryTimeCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.35
Description
Defines the capabilities of the watchdog expiry timer object.
Syntax
DellWatchDogTimerCapabilities (See Watchdog Timer Capabilities)
Access
Read-only
Table 127. Chassis Watchdog Control Expiry Time
Name
chassiswatchDogControlExpiryTime
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.36
Description
Defines the current reading and allows setting of the nonrecoverable
watchdog expiry timer object.
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 128. Chassis Allow Set Commands From SNMP
Name
chassisallowSETCommandsfromSNMP
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.37
Description
Specifies whether Simple Network Management Protocol (SNMP) Set
type commands are allowed by Server Administrator. This attribute does
not reflect whether SNMP Set type commands are allowed by the SNMP
master agent.
Syntax
DellBoolean
Access
Read-only
52
Table 129. Chassis Power Button Control Capabilities Unique
Name
chassisPowerButtonControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.38
Description
Defines the capabilities of the power button control function.
Syntax
DellPowerButtonControlCapabilities (See Power Button Control
Capabilities)
Access
Read-only
Table 130. Chassis Power Button Control Settings Unique
Name
chassisPowerButtonControlSettingsUnique
Object ID .
1.3.6.1.4.1.674.10892.1.300.10.1.39
Description
Defines the current reading and allows setting of the power button
control hardware
Syntax
DellPowerButtonControlSettings (See Power Button Control Settings)
Access
Read-only
Table 131. Chassis Reseller Name
Name
chassisResellerName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.40
Description
Defines the name of the chassis reseller.
Syntax
DisplayString
Access
Read-only
Table 132. Chassis Reseller Contact Information Name
Name
chassisResellerContactInformationName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.41
Description
Defines the chassis reseller contact information name.
Syntax
DisplayString
Access
Read-only
Table 133. Chassis Reseller Product Name
Name
chassisResellerProductName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.42
Description
Defines the chassis reseller product name.
Syntax
DisplayString
Access
Read-only
53
Table 134. Chassis Reseller System ID
Name
chassisResellerSystemID
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.43
Description
Defines the chassis reseller system ID.
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 135. Chassis NMI Button Control Capabilities Unique
Name
chassisNMIButtonControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.44
Description
Defines the capabilities of the NMI button control function.
Syntax
DellNMIButtonControlCapabilities (See NMI Button Control Capabilities)
Access
Read-only
Table 136. Chassis NMI Button Control Settings Unique
Name
chassisNMIButtonControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.45
Description
Defines the current reading and allows setting of the NMI button control
hardware.
Syntax
DellNMIButtonControlSettings (See NMI Button Control Settings)
Access
Read-only
Table 137. Chassis System Properties
Name
chassisSystemProperties
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.46
Description
Defines the properties of the system.
Syntax
DellSystemProperties (See System Properties)
Access
Read-only
Table 138. Chassis System Revision Number
Name
chassisSystemRevisionNumber
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.47
Description
Defines the revision number of the system where zero indicates the
original version of the system. The revision number is not available on all
systems.
Syntax
DellUnsigned8BitRange
Access
Read-only
54
Table 139. Chassis System Revision Name
Name
chassisSystemRevisionName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.48
Description
Defines the revision name of the system, if applicable.
Syntax
DellString
Access
Read-only
Table 140. Chassis Express Service Code Name
Name
chassisExpressServiceCodeName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.49
Description
Defines the express service code of the chassis.
Syntax
DellString
Access
Read-only
Table 141. Chassis Node ID
Name
chassisNodeIDName
Object ID
1.3.6.1.4.1.674.10892.1.300.10.1.50
Description
Defines the NodeID of the chassis.
Syntax
DellString
Access
Read-only
UUID Table
These objects comprise the server administrator definitions for the Universal Unique Identifier (UUID).
Table 142. UUID Table
Name
uUIDTable
Object ID
1.3.6.1.4.1.674.10892.1.300.20
Description
Defines the UUID table.
Syntax
SEQUENCE OF UUIDTableEntry
Access
Not accessible
Table 143. UUID Table Entry
Name
uUIDTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1
Description
Defines the UUID table entry.
Syntax
UUIDTableEntry
Access
Not accessible
Index
uUIDIndex
55
,
uUIDchassisIndex
Table 144. UUID Chassis Index
Name
uUIDchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 145. UUID Index
Name
uUIDIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.2
Description
Defines the index of the UUID in a specified chassis.
Syntax
DellObjectRange
Access
Read-only
Table 146. UUID Type
Name
uUIDType
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.3
Description
Defines the type of the UUID for this chassis.
Syntax
DellUUIDType
Access
Read-only
Table 147. UUID Value
Name
uUIDValue
Object ID
1.3.6.1.4.1.674.10892.1.300.20.1.4
Description
Defines the value of the UUID for this chassis.
Syntax
Octet String (SIZE(16))
Access
Read-only
POST Log Table
This section defines attributes for the power-on self-test (POST) log. When you turn on your computer,
the POST checks various system components before the operating system loads. The POST tests the
random-access memory (RAM), the hard drives, and the keyboard, for example. While the POST is
running, it makes a log file that system administrators can view. The variables in this section also
contribute to managing the POST log.
56
Table 148. POST Log Table
Name
postLogTable
Object ID
1.3.6.1.4.1.674.10892.1.300.30
Description
Defines the POST Log Table.
Syntax
SEQUENCE OF PostLogTableEntry
Access
Not accessible
Table 149. POST Log Table Entry
Name
postLogTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1
Description
Defines the POST Log Table entry.
Syntax
PostLogTableEntry
Access
Not accessible
Index
postLogchassisIndex
,
postLogRecordIndex
Table 150. POST Log Chassis Index
Name
postLogchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 151. POST Log Record Index
Name
postLogRecordIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1.2
Description
Defines the record number (one-based) of the POST log.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 152. POST Log State Capabilities Unique
Name
postLogStateCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1.3
Description
Defines the capabilities of the object that is writing the POST log.
Syntax
DellStateCapabilitiesLogUnique
57
Access
Read-only
Table 153. POST Log State Settings Unique
Name
postLogStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1.4
Description
Defines the state of the object that is writing the POST log.
Syntax
DellStateSettingsLogUnique
Access
Read-only
Table 154. POST Log Record
Name
postLogRecord
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1.5
Description
Defines the data for the specified chassis and record index in the POST
log being returned.
Syntax
DisplayString (SIZE (0..1024))
Access
Read-only
Table 155. POST Log Format
Name
postLogFormat
Object ID
1.3.6.1.4.1.674.10892.1.300.30.1.5
Description
Defines format of the POST log.
Syntax
DellLogFormat (See Log Format)
Access
Read-only
Event Log Table
Table 156. Event Log Table
Name
eventLogTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.40
Description
Defines the Event Log Table.
Syntax
SEQUENCE OF EventLogTableEntry
Access
Not accessible
Table 157. Event Log Table Entry
Name
eventLogTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1
Description
Defines the event Log Table Entry.
58
Syntax
EventLogTableEntry
Access
Not accessible
Index
eventLogchassisIndex
,
eventLogRecordIndex
Table 158. Event Log Chassis Index
Name
eventLogchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 159. Event Log Record Index
Name
eventLogRecordIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.2
Description
Defines the record index of the event log.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 160. Event Log State Capabilities Unique
Name
eventLogStateCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.3
Description
Defines the capabilities of the object that is writing the event log.
Syntax
DellStateCapabilitiesLogUnique
Access
Read-only
Table 161. Event Log State Settings Unique
Name
eventLogStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.4
Description
Defines the state settings for the object that is writing the event log.
Syntax
DellStateSettingsLogUnique
Access
Read-only
59
Table 162. Event Log Record
Name
eventLogRecord
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.5
Description
Defines the data for the specified chassis and log record index in the
event log being returned.
Syntax
DisplayString
Access
Read-only
Table 163. Event Log Format
Name
eventLogFormat
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.6
Description
Defines the format of the event log.
Syntax
DellLogFormat (See Log Format)
Access
Read-only
Table 164. Event Log Severity Status
Name
eventLogSeverityStatus
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.7
Description
Defines the severity of the event log record.
Syntax
DellStatus
Access
Read-only
Status
Mandatory
Table 165. Event Log Date Name
Name
eventLogDateName
Object ID
1.3.6.1.4.1.674.10892.1.300.40.1.8
Description
Defines the date and time of the event log record.
Syntax
DellDateName
Access
Read-only
Status
Mandatory
System BIOS Table
This table lists objects that define the system’s basic input/output system (BIOS).
Table 166. System BIOS Table
Name
systemBIOSTable
Object ID
1.3.6.1.4.1.674.10892.1.300.50
60
Description
Defines the System BIOS Table.
Syntax
SEQUENCE OF SystemBIOSTableEntry
Access
Not accessible
Table 167. System BIOS Table Entry
Name
systemBIOSTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1
Description
Defines the System BIOS Table entry.
Syntax
SystemBIOSTableEntry
Access
Not accessible
Index
systemBIOSchassisIndex
,
systemBIOSIndex
Table 168. System BIOS Chassis Index
Name
systemBIOSchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 169. System BIOS Index
Name
systemBIOSIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.2
Description
Defines the index (one-based) of the system BIOS of this object.
Syntax
DellObjectRange
Access
Read-only
Table 170. System BIOS State Capabilities
Name
systemBIOSStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.3
Description
Defines the capabilities of the system BIOS of this object.
Syntax
DellStateCapabilities
Access
Read-only
61
Table 171. System BIOS State Settings
Name
systemBIOSStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.4
Description
Defines the state of the system BIOS of this object.
Syntax
DellStateSettings
Access
Read-only
Table 172. System BIOS Status
Name
systemBIOSStatus
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.5
Description
Defines the status of the system BIOS of this object.
Syntax
DellStatus
Access
Read-only
Table 173. System BIOS Size
Name
systemBIOSSize
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.6
Description
Defines the image size of the system BIOS in kilobytes (KB). A zero (0)
indicates that the image size of the BIOS is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 174. System BIOS Release Date Name
Name
systemBIOSReleaseDateName
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.7
Description
Defines the release date of the system BIOS.
Syntax
DellDateName
Access
Read-only
Table 175. System BIOS Version Name
Name
systemBIOSVersionName
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.8
Description
Defines the version name of the system BIOS.
Syntax
DellString
Access
Read-only
62
Table 176. System BIOS Starting Address
Name
systemBIOSStartingAddress
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.9
Description
Defines the starting address of the system BIOS. A zero (0) indicates that
the address is unknown.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 177. System BIOS Ending Address
Name
systemBIOSEndingAddress
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.10
Description
Defines the ending address of the system BIOS. A zero (0) indicates that
the address is unknown.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 178. System BIOS Manufacturer Name
Name
systemBIOSManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.11
Description
Defines the system BIOS manufacturer’s name.
Syntax
DellString
Access
Read-only
Table 179. System BIOS Characteristics
Name
systemBIOSCharacteristics
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.12
Description
Defines characteristics of the system BIOS. This attribute is a bit field
where a bit has the meaning defined below when set to 1 (one). Bit 63 is
the first bit in the value, and bit 0 is the last bit in the value. See the
description of DellUnsigned64BitRange at the beginning of this file for
more information on the format of the value.
Bits 48-63 need to be examined in the context of the system ID. The
system ID is available in the attribute chassisID. If the value for chassisID
is non-zero, bits 48-63 have the meaning defined below
Bit Position
Meaning if Set
Bit 0
Reserved
Bit 1
Reserved
Bit 2
Unknown
63
64
Bit 3
BIOS Characteristics Not
Supported
Bit 4
ISA is supported
Bit 5
MCA is supported
Bit 6
EISA is supported
Bit 7
PCI is supported
Bit 8
PC Card (PCMCIA) is supported
Bit 9
Plug and Play is supported
Bit 10
APM is supported
Bit 11
BIOS is Upgradeable (Flash)
Bit 12
BIOS shadowing is allowed
Bit 13
VL-VESA is supported
Bit 14
ESCD support is available
Bit 15
Boot from CD is supported
Bit 16
Selectable Boot is supported
Bit 17
BIOS ROM is socketed
Bit 18
Boot From PC Card (PCMCIA) is
supported
Bit 19
EDD (Enhanced Disk Drive)
Specification is supported
Bit 20
Int 13h - Japanese Floppy for
NEC 9800 1.2mb (3.5 in, 1k Bytes/
Sector, 360 RPM) is supported
Bit 21
Int 13h - Japanese Floppy for
Toshiba 1.2mb (3.5 in, 360 RPM)
is supported
Bit 22
Int 13h - 5.25 in / 360 KB Floppy
Services are supported
Bit 23
Int 13h - 5.25 in /1.2MB Floppy
Services are supported
Bit 24
Int 13h - 3.5 in / 720 KB Floppy
Services are supported
Bit 25
Int 13h - 3.5 in / 2.88 MB Floppy
Services are supported
Bit 26
Int 5h, Print Screen Service is
supported
Bit 27
Int 9h, 8042 Keyboard services
are supported
Bit 28
Int 14h, Serial Services are
supported
Bit 29
Int 17h, Printer Services are
supported
Syntax
Bit 30
Int 10h, CGA/Mono Video
Services are supported
Bit 31
NEC PC-98
Bit 32
-47Reserved
Bit 48
Built-in NIC supports Magic
Packet
Bit 49
System supports Wake-on-LAN
Bit 50
System supports chassis intrusion
Bit 51
Built-in NIC supports patternmatching
Bit 52
System BIOS supports a 7character service tag
Bit 53
-63 Reserved
DellUnsigned64BitRange
Table 180. System BIOS Characteristics Ext 1
Name
systemBIOSCharacteristicsExt1
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.13
Description
Defines additional characteristics of the system basic input/output
system (BIOS). This attribute is a bit field where a bit has the meaning
defined below when set to 1 (one).
Bit Position
Meaning if Set
Bit 0
ACPI supported
Bit 1
USB Legacy is supported
Bit 2
AGP is supported
Bit 3
I2O boot is supported
Bit 4
LS-120 boot is supported
Bit 5
ATAPI ZIP Drive boot is supported
Bit 6
1394 boot is supported
Bit 7
Smart Battery supported
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 181. System BIOS Characteristics Ext 2
Name
systemBIOSCharacteristicsExt2
Object ID
1.3.6.1.4.1.674.10892.1.300.50.1.14
Description
Defines additional characteristics of the system BIOS. This attribute is a
bit field where a bit has the meaning defined below when set to 1 (one).
65
Bit Position
Meaning if Set
Bit 0
BIOS Boot Specification
supported
Bit 1
Function key-initiated Network
Service boot supported
Bit 2
Targeted Content Distribution
supported
Bit 3
7Reserved
Syntax
DellUnsigned8BitRange
Access
Read-only
Firmware Table
Table 182. Firmware Table
Name
firmwareTable
Object ID
1.3.6.1.4.1.674.10892.1.300.60
Description
Defines the Firmware Table.
Syntax
SEQUENCE OF FirmwareTableEntry
Access
Not accessible
Table 183. Firmware Table Entry
Name
firmwareTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1
Description
Defines the Firmware Table entry
Syntax
FirmwareTableEntry
Access
Not accessible
Index
firmwarechassisIndex
,
firmwareIndex
Table 184. Firmware Chassis Index
Name
firmwarechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
66
Table 185. Firmware Index
Name
firmwareIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.2
Description
Defines the index (one-based) of the firmware in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 186. Firmware State Capabilities
Name
firmwareStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.3
Description
Defines the capabilities of the firmware states.
Syntax
DellStateCapabilities
Access
Read-only
Table 187. Firmware State Capabilities
Name
firmwareStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.4
Description
Defines the state of the firmware and allows for the setting of the
firmware.
Syntax
DellStateCapabilities
Access
Read-only
Table 188. Firmware Status
Name
firmwareStatus
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.5
Description
Defines the status of the firmware.
Syntax
DellStateSettings
Access
Read-only
Table 189. Firmware Size
Name
firmwareSize
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.6
Description
Defines the image size of the firmware in KB. A zero (0) indicates that
the size is unknown.
Syntax
DellUnsigned16BitRange
Access
Read-only
67
Table 190. Firmware Type
Name
firmwareType
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.7
Description
Defines the type of the firmware.
Syntax
DellFirmwareType
Access
Read-only
Table 191. Firmware Type Name
Name
firmwareTypeName
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.8
Description
Defines the name of firmware type.
Syntax
DellString
Access
Read-only
Table 192. Firmware Update Capabilities
Name
firmwareUpdateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.9
Description
Defines the bitmap of supported methods for firmware update.
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 193. Firmware Date Name
Name
firmwareDateName
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.10
Description
Defines the date of the firmware.
Syntax
DellDateName
Access
Read-only
Table 194. Firmware Version Name
Name
firmwareVersionName
Object ID
1.3.6.1.4.1.674.10892.1.300.60.1.11
Description
Defines the version name of the firmware.
Syntax
DellString
Access
Read-only
Intrusion Table
The following objects and attributes describe the different forms of chassis intrusion, a situation that
occurs when the cover of a computer is removed.
68
Table 195. Intrusion Table
Name
intrusionTable
Object ID
1.3.6.1.4.1.674.10892.1.300.70
Description
Defines the Intrusion Table.
Syntax
SEQUENCE OF IntrusionTableEntry
Access
Not accessible
Table 196. Intrusion Table Entry
Name
intrusionTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1
Description
Defines the Intrusion Table entry.
Syntax
IntrusionTableEntry
Access
Not accessible
Index
intrusionchassisIndex
,
intrusionIndex
Table 197. Intrusion Chassis Index
Name
intrusionchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 198. Intrusion Index
Name
intrusionIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.2
Description
Defines the index of the intrusion objects in this subgroup.
Syntax
DellObjectRange
Access
Read-only
Table 199. Intrusion State Capabilities
Name
intrusionStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.3
Description
Defines the capabilities of the intrusion object.
Syntax
DellStateCapabilities
Access
Read-only
69
Table 200. Intrusion State Settings
Name
intrusionStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.4
Description
Defines the settings of the intrusion object.
Syntax
DellStateSettings
Access
Read-only
Table 201. Intrusion Status
Name
intrusionStatus
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.5
Description
Defines the status of the intrusion object.
Syntax
DellStatus
Access
Read-only
Table 202. Intrusion Reading
Name
intrusionReading
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.6
Description
Defines the reading of the intrusion object.
Syntax
DellIntrusionReading
Access
Read-only
Table 203. Intrusion Type
Name
intrusionType
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.7
Description
Defines the type of the intrusion object.
Syntax
DellIntrusionType
Access
Read-only
Table 204. Intrusion Location Name
Name
intrusionLocationName
Object ID
1.3.6.1.4.1.674.10892.1.300.70.1.8
Description
Defines the location name of the intrusion object in this subgroup.
Syntax
DellString
Access
Read-only
Baseboard Table
This table lists objects that define the baseboard of a system.
70
Table 205. Baseboard Table
Name
baseBoardTable
Object ID
1.3.6.1.4.1.674.10892.1.300.80
Description
Defines the Baseboard Table.
Syntax
SEQUENCE OF BaseBoardTableEntry
Access
Not accessible
Table 206. Baseboard Table Entry
Name
baseBoardTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1
Description
Defines the Baseboard Table entry.
Syntax
BaseBoardTableEntry
Access
Not accessible
Index
baseBoardChassisIndex
,
baseBoardIndex
Table 207. Baseboard Chassis Index
Name
baseBoardchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 208. Baseboard Index
Name
baseBoardIndex
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.2
Description
Defines the index (one-based) of the base board.
Syntax
DellObjectRange
Access
Read-only
Table 209. Baseboard State Capabilities
Name
baseBoardStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.3
Description
Defines the state capabilities of the baseboard.
Syntax
DellStateCapabilities
Access
Read-only
71
Table 210. Baseboard State Settings
Name
baseBoardStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.4
Description
Defines the state settings of the baseboard.
Syntax
DellStateSettings
Access
Read-only
Table 211. Baseboard Status
Name
baseBoardStatus
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.5
Description
Defines the status of the baseboard.
Syntax
DellStatus
Access
Read-only
Table 212. Baseboard Feature Flags
Name
baseBoardFeatureFlags
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.6
Description
Defines the features of the baseboard..
Syntax
DellBaseBoardFeatureFlags
Access
Read-only
Table 213. Baseboard Type
Name
baseBoardType
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.7
Description
Defines the type of the baseboard.
Syntax
DellBaseBoardType
Access
Read-only
Table 214. Baseboard Type Name
Name
baseBoardTypeName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.8
Description
Defines the name of the type of baseboard.
Syntax
DellString
Access
Read-only
Table 215. Baseboard Location Name
Name
baseBoardLocationName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.9
72
Description
Defines the location name of the baseboard.
Syntax
DellString
Access
Read-only
Table 216. Baseboard Manufacturer Name
Name
baseBoardManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.10
Description
Defines the baseboard manufacturer’s name.
Syntax
DellString
Access
Read-only
Table 217. Baseboard Product Name
Name
baseBoardProductName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.11
Description
Defines the baseboard product’s name.
Syntax
DellString
Access
Read-only
Table 218. Baseboard Version Name
Name
baseBoardVersionName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.12
Description
Defines the baseboard version name..
Syntax
DellString
Access
Read-only
Table 219. Baseboard Service Tag Name
Name
baseBoardServiceTagName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.13
Description
Defines the baseboard service tag name.
Syntax
DellString
Access
Read-only
Table 220. Baseboard Piece Part ID (PPID) Name
Name
baseBoardPiecePartIDName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.14
Description
Defines the baseboard PPID.
Syntax
DellString
Access
Read-only
73
Table 221. Baseboard Asset Tag Name
Name
baseBoardAssetTagName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.15
Description
Defines the baseboard asset tag name.
Syntax
DellString
Access
Read-only
Table 222. Baseboard Express Service Code Name
Name
baseBoardExpressServiceCodeName
Object ID
1.3.6.1.4.1.674.10892.1.300.80.1.16
Description
Defines the express service code of the baseboard.
Syntax
DellString
Access
Read-only
Chassis Information Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 223. Log Format
Variable Name : DellLogFormat
Data Type: Integer
Possible Data Values
Meaning of Data Value
raw(1)
The log is in the format received from the
firmware.
ascii(2)
The log is in ASCII format.
uniCode(3)
The log is in Unicode format.
Table 224. Chassis Type
Variable Name : DellChassisType
Data Type: Integer
Possible Data Values
Meaning of Data Value
other(1)
The chassis type is not one of the following:
unknown(2)
The chassis type is unknown.
desktop(3)
The chassis type is a desktop.
lowProfileDeskto
p(4)
The chassis type is a low-profile desktop.
pizzaBox(5)
The chassis type is a pizza box.
miniTower(6)
The chassis type is a minitower.
tower(7)
The chassis type is a tower.
portable(8)
The chassis type is a portable.
74
lapTop(9)
The chassis type is a laptop.
noteBook(10)
The chassis type is a notebook.
handHeld(11)
The chassis type is a handheld.
dockingStation(1
2)
The chassis type is a docking station.
allInOne(13)
The chassis type is an all-in-one.
subNoteBook(14)
The chassis type is a subnotebook.
spaceSaving(15)
The chassis type is a spacesaver.
lunchBox(16)
The chassis type is a lunch box.
mainSystemChassi
s(17)
The chassis type is the main system chassis.
expansionChassi
s(18)
The chassis type is an expansion chassis.
subChassis(19)
The chassis type is a subchassis.
busExpansionChas
sis(20)
The chassis type is a bus-expansion chassis.
peripheralChassi
s(21)
The chassis type is a peripheral chassis.
raidChassis(22)
The chassis type is a disk RAID chassis.
rackMountChassi
s(23)
The chassis type is a rack-mounted chassis.
sealedCasePC(24)
The chassis type is a sealed-case chassis.
multiSystemChass
is(25)
The chassis type is a multisystem chassis.
Table 225. Connection Status
Variable Name : DellConnectionStatus
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(2)
The status of the chassis connection is
unknown.
ok(3)
The status of the chassis connection is OK.
failure(4)
The status of the chassis connection is
failure.
Table 226. Fan Control Capabilities
Variable Name : DellFanControlCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The fan’s capabilities are unknown.
75
lowSpeedCapable(
2)
The fan can be set to low speed.
highSpeedCapabl
e(4)
The fan can be set to high speed.
lowOrhighSpeedCa
pable(6)
The fan can be set to low or high speed.
Table 227. Front-Panel LED Control Capabilities
Variable Name : DellLEDControlCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The LED control capabilities are unknown.
alertOnErrorCapa
ble(2)
The LED control can be set to alert on an
error condition.
alertOnWarningAn
dErrorCap
able(4)
The LED control can be set to alert on an
error and a warning condition.
alertOnWarningOr
ErrorCapa ble(6)
The LED control can be set to alert on an
error or a warning condition.
Table 228. Front-Panel LED Control Settings
Variable Name : DellLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The LED control setting is unknown.
alertOnError(2)
The LED control is set to alert on an error
condition.
alertOnWarningAn The LED control is set to alert on an error or
dError(4)
a warning condition.
Table 229. Hard-Drive Fault LED Control Capabilities
Variable Name : DellHDFaultLEDControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The hard drive has no fault LED capabilities.
unknownCapabilit The hard-drive fault LED capabilities are
ies(1)
unknown.
enableCapable(2) The hard-drive fault LED can be disabled
(offline, a binary 0 value) or enabled (online, a
binary 1 value).
notReadyCapable( The hard-drive fault LED can indicate not
4)
ready.
76
resetCapable(8)
The hard-drive fault LED can be reset.
Table 230. Hard-Drive Fault LED Control Settings
Variable Name : DellHDFaultLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any fault settings
capabilities.
unknown(1)
The hard-drive fault LEDs’ state is unknown.
enabled(2)
The hard-drive fault LEDs’ state is disabled
(offline, a binary 0 value) or enabled (online, a
binary 1 value).
notReady(4)
The hard-drive fault LEDs’ state is not ready.
reset(8)
The hard-drive fault LEDs have been reset.
resetAndEnable(1 The hard-drive fault LEDs have been reset
0)
and enabled.
Table 231. Chassis Identification Control Capabilities
Variable Name : DellChassisIdentifyControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any chassis
identification capabilities.
unknownCapabilit The chassis identification control’s
ies(1)
capabilities are unknown.
enableCapable(2) The chassis identification controls can be
disabled (offline, a binary 0 value) or enabled
(online, a binary 1 value).
notReadyCapable( The chassis identification control’s
4)
capabilities are not ready.
identifyCapable( The chassis identification control’s LEDs can
8)
be made to identify the chassis.
resetAndEnable(1 The hard-drive fault LEDs have been reset
0)
and enabled.
NOTE: Chassis identification capabilities allow system administrators to set front panel lightemitting diodes (LEDs) to blink when the chassis has malfunctioning components. When enabled,
the blinking lights help administrators locate the problem chassis.
Table 232. Chassis Identification Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
77
unknown(1)
The chassis identification control’s state is
unknown..
enabled(2)
The chassis identification control’s state is
disabled (offline, a binary 0 value) or enabled
(online, a binary 1 value).
notReady(4)
The chassis identification control’s state is
not ready.
identifyChassis( The chassis identification control’s LEDs may
8)
be returned to (normal) 0, or (identify chassis)
1.
identifyChassisA The chassis identification control’s LEDs may
ndEnable (10)
be returned to normal (a binary 0 value), or
identify chassis and enabled (a binary 1 value).
Table 233. Host Control Capabilities
Variable Name : DellHostControlCapabilities
NOTE: An operator can manually enable these actions using
SNMP.
Data Type: Integer
Possible Data Values Meaning of Data Value
manualRebootCapa The operator can reboot capable host.
ble(1)
manualPowerOFFCa The operator can power off capable host.
pable(2)
manualPowerCycle The operator can power-cycle capable host.
Capable(4)
manualAllExceptO The operator can reboot and power off
perating
capable host.
SystemShutdownCa
pable(7)
manualOperatingS The operator can shut down the operatingystemShut
system–shutdown capable host.
downCapable(8)
manualFullyCapab The operator can reboot, power on and off
le(15)
the power-cycle capable host, and shut
down the operating-system–shutdown
capable host.
manualRebootWith The operator can reboot with operating
OSShutdow
system shutdown.
nCapable(16)
manualRebootWith The operator can reboot without operating
outOSShut
system shutdown.
downCapable(32)
manualPowerOffWi The operator can power off with operating
thOSShutd
system shutdown.
ownCapable(64)
78
manualPowerOffWi The operator can power off without
thoutOSSh
operating system shutdown.
utdownCapable(12
8)
manualPowerCycle The operator can power cycle with operating
WithOSShu
system shutdown.
tdownCapable(256
)
manualPowerCycle The operator can power cycle without
WithoutOS
operating system shutdown.
ShutdownCapable(
512)
Table 234. Host Control Settings
Variable Name : DellHostControlSettings
NOTE: An operator can manually cause these actions using
SNMP.
Data Type: Integer
Possible Data Values Meaning of Data Value
manualReboot(1)
The operator can reboot the host.
manualPowerOFF(2 The operator can power off the host.
)
manualPowerCycl
e(4)
Power cycle the host.
manualOperatingS The operator can shut down the operating
ystemShutdown(8) system on the host.
manualOperatingS The operator can shut down the operating
ystemShutdownThe system on the host then power cycle
nPowerCycle(12)
machine.
Table 235. Watchdog Control Capabilities
Variable Name : DellWatchDogControlCapabilities
NOTE: When the system determines that the operating system
is not responding, it automatically performs the selected action
without operator intervention.
Data Type: Integer
Possible Data Values Meaning of Data Value
automaticRebootC Watchdog controls can be set to reboot
apable(1)
capable host.
automaticPowerCy Watchdog controls can be set to power
cleCapable(2)
cycleable capable host.
automaticNotific Watchdog controls can be set to notify
ationCapable(4)
capable host
automaticWatchDo Watchdog controls can be set to function
gTimerCapable(8) automatically.
79
automaticPowerOf Watchdog controls can be set to
fCapable(16)
automatically power off host.
automaticAllExce Watchdog controls can be set to
ptNotificationCa automatically perform all functions except
p able(27)
notification capable.
automaticFullyCa Watchdog controls can be set to
pable(31)
automatically perform all functions.
Table 236. Watchdog Control Settings
Variable Name : DellWatchControlSettings
NOTE: The watchdog timer is the mechanism used by a chassis
to determine if the operating system has stopped responding.
Data Type: Integer
Possible Data Values Meaning of Data Value
automaticRebootE Automatic reboot is enabled for this host.
nabled(1)
automaticPowerCy Automatic power cycleable is enabled for this
cleEnabled(2)
host.
automaticNotific Automatic notification is enabled for this
ationEnabled(4)
host.
automaticPowerOf Automatic power off is enabled for this host.
fEnabled(8)
Table 237. Watchdog Timer Capabilities
Variable Name : DellWatchDogTimerCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
type1Capable(1)
Watchdog timer can time in intervals from
20–480 seconds.
type2Capable(2)
Watchdog timer can time in 30-, 60-, 120-,
and 480-second intervals.
type3Capable(4)
Watchdog timer can time in 60-second
intervals.
Table 238. Power Button Control Capabilities
Variable Name : DellPowerButtonControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The power button has no capabilities.
unknownCapabilit The power button capabilities are unknown.
ies(1)
80
enableCapable(2) The power button can be enabled (online) or
disabled (offline).
Table 239. Power Button Control Settings
Variable Name : DellPowerButtonControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The power button has no settings
capabilities.
unknown(1)
The power button settings are unknown.
enabled(2)
The power button state is enabled.
disabled(4)
The power button state is disabled.
Table 240. NMI Button Control Capabilities
Variable Name : DellNMIButtonControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The NMI button has no capabilities.
unknownCapabilit The NMI button capabilities are unknown.
ies(1)
enableCapable(2) The NMI button can be enabled (online) or
disabled (offline).
Table 241. System Properties
Variable Name : DellSystemProperties
NOTE: These values are bit masks, so combination values are
possible.
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
No properties.
energySmart(1)
The system is an Energy Smart System.
Table 242. NMI Button Control Settings
Variable Name : DellNMIButtonControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The NMI button has no settings capabilities.
unknown(1)
The NMI button settings are unknown.
enabled(2)
The NMI button state is enabled.
disabled(4)
The NMI button state is disabled.
81
Table 243. Baseboard Type
Variable Name : DellBaseBoardType
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The baseboard type is unknown.
other(2)
The baseboard type is not one of the
following types.
serverBlade(3)
The baseboard type is a server blade.
connectivitySwit The baseboard type is a connectivity switch.
ch(4)
systemManagement The baseboard type is a system management
Module(5)
module.
processorModule( The baseboard type is a processor module.
6)
ioModule(7)
The baseboard type is an I/O module.
memoryModule(8)
The baseboard type is a memory module
daughterBoard(9) The baseboard type is a daughter board.
motherboard(10)
The baseboard type is a mother board.
processorMemoryM The baseboard type is a processor or
odule(11)
memory module
processorIOModul The baseboard type is a processor or I/O
e(12)
module
interconnectBoar The baseboard type is an interconnect board.
d(13)
Table 244. Chassis System Class
Variable Name : DellChassisSystemClass
Data Type: Integer
Possible Data Values Meaning of Data Value
other(1)
The chassis system class is not one of the
following:
unknown(2)
The chassis system class is unknown.
workstationClas
s(3)
The chassis system class is a workstation.
serverClass(4)
The chassis system class is a server.
desktopClass(5)
The chassis system class is a desktop.
portableClass(6) The chassis system class is a portable.
netPCClass(7)
The chassis system class is a Net PC.
storageClass(8)
The chassis system class is storage.
82
Table 245. Firmware Type
Variable Name : DellFirmwareType
Data Type: Integer
Possible Data Values Meaning of Data Value
other(1)
The firmware type is other than following
values.
unknown(2)
The firmware type is unknown.
systemBIOS(3)
The firmware type is System BIOS
embeddedSystemMa The firmware type is Embedded System
nagementContro
Management Controller.
ller(4)
powerSupplyParal The firmware type is Power Supply Paralleling
lelingBoard(5)
Board.
systemBackPlane( The firmware type is System (Primary)
6)
Backplane.
powerVault2XXSKe The firmware type is Dell PowerVault 2XXS
rnel(7)
Kernel.
powerVault2XXSAp The firmware type is PowerVault 2XXS
plication(8)
Application.
frontPanel(9)
The firmware type is Front Panel Controller.
baseboardManagem The firmware type is Baseboard Management
entController
Controller.
(10)
hotPlugPCI(11)
The firmware type is Hot Plug Peripheral
Component Interconnect (PCI) Controller.
sensorData(12)
The firmware type is Sensor Data Records.
peripheralBay(13 The firmware type is Peripheral Bay
)
Backplane.
secondaryBackPla The firmware type is Secondary Backplane
ne(14)
for ESM 2 systems.
secondaryBackPla The firmware type is Secondary Backplane
neESM3And4(15)
for ESM 3 and 4 systems.
rac(16)
The firmware type is Remote Access
Controller.
iDRAC(17)
The firmware type is Integrated Dell Remote
Access Controller.
unifiedServerCon The firmware type is Unified Server
figurator(19)
Configurator.
lifecycleControl The firmware type is Lifecycle Controller.
ler(20)
Table 246. Baseboard Feature Flags
Variable Name : DellBaseBoardFeatureFlags
83
Data Type: Integer
Possible Data Values Meaning of Data Value
NOTE: These values are bit fields, so combination values are
possible.
no features(0)
This baseboard has no feature flags.
boardIsHostingBo This baseboard is a hosting board.
ard(1)
boardRequiresDau This baseboard requires at least one daughter
ghterBoard (2)
board or auxiliary card.
boardIsRemovabl
e(4)
This baseboard is removable.
boardIsReplaceab This baseboard is replaceable.
le(8)
boardIsHotSwappa This baseboard is hot swappable.
ble(16)
Operating System Group
The Operating System Group provides status and identifying information about a system’s operating
system. Identifying information includes the name, version, service pack, and patch level of the installed
operating system.
Operating System Memory Table
Table 247. Operating System Memory Table
Name
operatingSystemMemoryTable
Object ID
1.3.6.1.4.1.674.10892.1.400.20
Description
Defines the Operating System Memory Table.
Syntax
SEQUENCE OF OperatingSystemMemoryTableEntry
Access
Not accessible
Table 248. Operating System Memory Table Entry
Name
operatingSystemTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1
Description
Defines the Operating System Memory Table entry.
Syntax
OperatingSystemMemoryTableEntry
Access
Not accessible
Index
operatingSystemMemorychassisIndex
84
Table 249. Operating System Memory Chassis Index
Name
operatingSystemMemorychassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 250. Operating System Memory State Capabilities
Name
operatingSystemMemoryStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.2
Description
Defines the capabilities of the operating system memory.
Syntax
DellStateCapabilities
Access
Read-only
Table 251. Operating System Memory State Settings
Name
operatingSystemMemoryStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.3
Description
Defines the state and allows the setting of the operating system
memory.
Syntax
DellStateSettings
Access
Read-only
Table 252. Operating System Memory Status
Name
operatingSystemMemoryStatus
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.4
Description
Defines the status of the operating system memory.
Syntax
DellStatus
Access
Read-only
Table 253. Operating System Memory Total Physical Size
NOTE: operatingSystemMemoryTotalPhysicalSize is no more used. This attribute is
deprecated and replaced by operatingSystemMemoryExtTotalPhysicalSize.
Name
operatingSystemMemoryTotalPhysicalSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.5
Description
Defines the total physical memory size in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
85
Table 254. Operating System Memory Available Physical Size
Name
operatingSystemMemoryAvailablePhysicalSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.6
Description
Defines the available physical memory size in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 255. Operating System Memory Total Page File Size
Name
operatingSystemMemoryTotalPageFileSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.7
Description
Defines the total page file memory size in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 256. Operating System Memory Available Page File Size
Name
operatingSystemMemoryAvailablePageFileSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.8
Description
Defines the available page file memory size in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 257. Operating System Memory Total Virtual Size
Name
operatingSystemMemoryTotalVirtualSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.9
Description
Defines the total virtual memory size in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 258. Operating System Memory Available Virtual Size
Name
operatingSystemMemoryAvailableVirtualSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.10
Description
Defines the available virtual memory size in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 259. Operating System Memory Ext Total Physical Size
NOTE: This attribute replaces operatingSystemMemoryTotalPhysicalSize.
Name
86
operatingSystemMemoryExtTotalPhysicalSize
Object ID
1.3.6.1.4.1.674.10892.1.400.20.1.11
Description
This attribute defines the total physical memory for the operating
system memory in KBytes.
Syntax
DellUnsigned64BitRange
Access
Read-only
System Resource Group
The Management Information Base (MIB) variables presented in this section enable you to track various
attributes of your system resources. This section includes System Resource Group Tables that track
variables such as the owner, ports, system memory, interrupts, and direct memory access.
System Resource Group Tables
The following MIB tables define objects for the System Resource Group:
•
System Resource Map Table
•
System Resource Owner Table
•
System Resource Input/Output (I/O) Port Table
•
System Resource Memory Table
•
System Resource Interrupt Table
•
System Resource Direct Memory Access (DMA) Table
System Resource Map Table
Table 260. System Resource Map Table
Name
systemResourceMapTable
Object ID
1.3.6.1.4.1.674.10892.1.500.10
Description
Defines the System Resource Map Table.
Syntax
SEQUENCE OF SystemResourceMapTableEntry
Access
Not accessible
Table 261. System Resource Map Table Entry
Name
systemResourceMapTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1
Description
Defines the System Resource Map Table entry.
Syntax
SystemResourceMapTableEntry
Access
Not accessible
Index
systemResourceMapchassisIndex
,
systemResourceMapIndex
87
Table 262. System Resource Map Chassis Index
Name
systemResourceMapChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 263. System Resource Map Index
Name
systemResourceMapIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1.2
Description
Defines the index of system resource maps in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 264. System Resource Map State Capabilities
Name
systemResourceMapStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1.3
Description
Defines the capabilities of this system map.
Syntax
DellStateCapabilities
Access
Read-only
Table 265. System Resource Map State Settings
Name
systemResourceMapStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1.4
Description
Defines the state and allows the setting of this system map.
Syntax
DellStateSettings
Access
Read-only
Table 266. System Resource Map Status
Name
systemResourceMapStatus
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1.5
Description
Defines the status of this system map.
Syntax
DellStatus
Access
Read-only
Table 267. System Resource Map Type
Name
systemResourceMapType
Object ID
1.3.6.1.4.1.674.10892.1.500.10.1.6
88
Description
Defines the type of this system map.
Syntax
DellSystemResourceMapType (System Resource Map Type)
Access
Read-only
System Resource Owner Table
Table 268. System Resource Owner Table
Name
systemResourceOwnerTable
Object ID
1.3.6.1.4.1.674.10892.1.500.20
Description
Defines the System Resource Owner Table.
Syntax
SEQUENCE OF SystemResourceOwnerTableEntry
Access
Not accessible
Table 269. System Resource Owner Table Entry
Name
systemResourceOwnerTable
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1
Description
Defines the System Resource Owner Table entry. Variables in this group
reference the System Resource Map index.
Syntax
SystemResourceOwnerTableEntry
Access
Not accessible
Index
systemResourceOwnerchassisIndex
,
systemResourceOwnerIndex
Table 270. System Resource Owner Chassis Index
Name
systemResourceOwnerchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 271. System Resource Owner Index
Name
systemResourceOwnerIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.2
Description
Defines the index of system resource owners for this chassis.
Syntax
DellObjectRange
Access
Read-only
89
Table 272. System Resource Owner State Capabilities
Name
systemResourceOwnerStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.3
Description
Defines the capabilities of this system resource owner.
Syntax
DellStateCapabilities
Access
Read-only
Table 273. System Resource Owner State Settings
Name
systemResourceOwnerStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.4
Description
Defines the state settings of this system resource owner.
Syntax
DellStateSettings
Access
Read-only
Table 274. System Resource Owner Status
Name
systemResourceOwnerStatus
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.5
Description
Defines the status of this system resource owner.
Syntax
DellStatus
Access
Read-only
Table 275. System Resource Owner Interface Type
Name
systemResourceOwnerInterfaceType
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.6
Description
Defines the interface type for this system resource owner.
Syntax
DellResourceOwnerInterfaceType (Resource Owner Interface Type)
Access
Read-only
Table 276. System Resource Map Index Reference
Name
systemResourceMapIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.7
Description
Defines the index to the associated system resource map in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 277. System Resource Owner Description Name
Name
systemResourceOwnerDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.8
90
Description
Defines the description name of the system resource owner.
Syntax
DellString
Access
Read-only
Table 278. System Resource Owner Interface Instance
Name
systemResourceOwnerInterfaceInstance
Object ID
1.3.6.1.4.1.674.10892.1.500.20.1.9
Description
Defines the associated system resource owner interface instance in this
chassis.
Syntax
DellObjectRange
Access
Read-only
System Resource Input/Output (I/O) Port Table
Table 279. System Resource Input/Output (I/O) Port Table
Name
systemResourceIOPortTable
Object ID
1.3.6.1.4.1.674.10892.1.500.30
Description
Defines the System Resource I/O Port Table.
Syntax
SEQUENCE OF SystemResourceIOPortTableEntry
Access
Not accessible
Table 280. System Resource I/O Port Table Entry
Name
systemResourceIOPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1
Description
Defines the System Resource I/O Port Table entry.
Syntax
SystemResourceIOPortTableEntry
Access
Not accessible
Index
systemResourceIOPortchassisIndex
,
systemResourceIOPortIndex
Table 281. System Resource I/O Port Chassis Index
Name
systemResourceIOPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
91
Table 282. System Resource I/O Port Index
Name
systemResourceIOPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.2
Description
Defines the index (one-based) of the system resource I/O ports in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 283. System Resource I/O Port State Capabilities
Name
systemResourceIOPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.3
Description
Defines the capabilities of the system resource I/O port.
Syntax
DellStateCapabilities
Access
Read-only
Table 284. System Resource I/O Port State Settings
Name
systemResourceIOPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.4
Description
Defines the state and allows the setting of the system resource I/O port.
Syntax
DellStateSettings
Access
Read-only
Table 285. System Resource I/O Port Status
Name
systemResourceIOPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.5
Description
Defines the status of the system resource I/O port.
Syntax
DellStateSettings
Access
Read-only
Table 286. System Resource I/O Port Owner Index Reference
Name
systemResourceIOPortOwnerIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.6
Description
Defines the index to the associated system resource owner in this
chassis.
Syntax
DellObjectRange
Access
Read-only
92
Table 287. System Resource I/O Port Share Disposition
Name
systemResourceIOPortShareDisposition
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.7
Description
Defines the share disposition of the system resource I/O port.
Syntax
DellResourceShareDisposition (Resource Share Disposition)
Access
Read-only
Table 288. System Resource I/O Port Starting Address
Name
systemResourceIOPortStartingAddress
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.8
Description
Defines the 64 bits of the starting address of the system resource I/O
port.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 289. System Resource I/O Port Ending Address
Name
systemResourceIOPortEndingAddress
Object ID
1.3.6.1.4.1.674.10892.1.500.30.1.9
Description
Defines the 64 bits of the ending address of the system resource I/O
port.
Syntax
DellUnsigned64BitRange
Access
Read-only
System Resource Memory Table
Table 290. System Resource Memory Table
Name
systemResourceMemoryTable
Object
1.3.6.1.4.1.674.10892.1.500.40
Description
Defines the System Resource Memory Table.
Syntax
SEQUENCE OF SystemResourceMemoryTableEntry
Access
Not accessible
Table 291. System Resource Memory Table Entry
Name
systemResourceMemoryTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1
Description
Defines the System Resource Memory Table entry.
Syntax
SystemResourceMemoryTableEntry
Access
Not accessible
Index
systemResourceMemorychassisIndex
93
,
systemResourceMemoryIndex
Table 292. System Resource Memory Chassis Index
Name
systemResourceMemorychassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 293. System Resource Memory Index
Name
systemResourceMemoryIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.2
Description
Defines the index of system resource memory in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 294. System Resource Memory State Capabilities
Name
systemResourceMemoryStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.3
Description
Defines the capabilities of this system resource memory.
Syntax
DellObjectRange
Access
Read-only
Table 295. System Resource Memory State Settings
Name
systemResourceMemoryStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.4
Description
Defines the state of this system resource memory.
Syntax
DellObjectRange
Access
Read-only
Table 296. System Resource Memory Status
Name
systemResourceMemoryStatus
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.5
Description
Defines the status of this system resource memory.
Syntax
DellStatus
Access
Read-only
94
Name
systemResourceMemoryOwnerIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.6
Description
Defines the index to the associated system resource owner in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 297. System Resource Memory Share Disposition
Name
systemResourceMemoryShareDisposition
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.7
Description
Defines the share disposition of the system resource memory.
Syntax
DellResourceShareDisposition (Resource Share Disposition)
Access
Read-only
Table 298. System Resource Memory Starting Address
Name
systemResourceMemoryStartingAddress
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.8
Description
Defines the 64 bits of the starting address of the system resource
memory.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 299. System Resource Memory Ending Address
Name
systemResourceMemoryEndingAddress
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.9
Description
Defines the 64 bits of the ending address of the system resource
memory.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 300. System Resource Memory Flags
Name
systemResourceMemoryFlags
Object ID
1.3.6.1.4.1.674.10892.1.500.40.1.10
Description
Defines the permission flags for the system resource memory.
Syntax
DellResourceMemoryFlags (Resource Memory Flags)
Access
Read-only
95
System Resource Interrupt Table
Table 301. System Resource Interrupt Table
Name
systemResourceInterruptTable
Object ID
1.3.6.1.4.1.674.10892.1.500.50
Description
Defines the System Resource Interrupt Table.
Syntax
SEQUENCE OF SystemResourceInterruptTableEntry
Access
Not accessible
Table 302. System Resource Interrupt Table Entry
Name
systemResourceInterruptTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1
Description
Defines the System Resource Interrupt Table entry.
Syntax
SystemResourceInterruptTableEntry
Access
Not accessible
Index
systemResourceInterruptchassisIndex
,
systemResourceInterruptIndex
Table 303. System Resource Interrupt Chassis Index
Name
systemResourceInterruptchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Not accessible
Table 304. System Resource Interrupt Index
Name
systemResourceInterruptIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.2
Description
Defines the index (one-based) of this interrupt resource.
Syntax
DellObjectRange
Access
Read-only
Table 305. System Resource Interrupt State Capabilities
Name
systemResourceInterruptStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.3
Description
Defines the capabilities of this system resource interrupt.
Syntax
DellStateCapabilities
96
Access
Read-only
Table 306. System Resource Interrupt State Settings
Name
systemResourceInterruptStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.4
Description
Defines the state of this system resource interrupt.
Syntax
DellStateSettings
Access
Read-only
Table 307. System Resource Interrupt Status
Name
systemResourceInterruptStatus
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.5
Description
Defines the status of this system resource interrupt.
Syntax
DellStatus
Access
Read-only
Table 308. System Resource Interrupt Owner Index Reference
Name
systemResourceInterruptOwnerIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.6
Description
Defines the index for the associated system resource owner in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 309. System Resource Interrupt Owner Share Disposition
Name
systemResourceInterruptShareDisposition
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.7
Description
Defines the share disposition of the system resource interrupt.
Syntax
DellResourceShareDisposition (Resource Share Disposition)
Access
Read-only
Table 310. System Resource Interrupt Level
Name
systemResourceInterruptLevel
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.8
Description
Defines the interrupt request (IRQ) level of the system resource
interrupt.
Syntax
DellUnsigned32BitRange
Access
Read-only
97
Table 311. System Resource Interrupt Type
Name
systemResourceInterruptType
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.9
Description
Defines the interrupt type of the system resource interrupt.
Syntax
DellResourceInterruptType (Resource Interrupt Type)
Access
Read-only
Table 312. System Resource Interrupt Trigger
Name
systemResourceInterruptTrigger
Object ID
1.3.6.1.4.1.674.10892.1.500.50.1.10
Description
Defines the interrupt trigger of the system resource interrupt.
Syntax
DellResourceInterruptTrigger (Resource Interrupt Trigger)
Access
Read-only
System Resource Direct Memory Access (DMA) Table
Table 313. System Resource Direct Memory Access (DMA) Table
Name
systemResourceDMATable
Object ID
1.3.6.1.4.1.674.10892.1.500.60
Description
Defines the System Resource DMA Table.
Syntax
SEQUENCE OF SystemResourceDMATableEntry
Access
Not accessible
Table 314. System Resource DMA Table Entry
Name
systemResourceDMATable
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1
Description
Defines the System Resource DMA Table entry.
Syntax
SystemResourceDMATableEntry
Access
Not accessible
Index
systemResourceDMAchassisIndex
,
systemResourceDMAIndex
Table 315. System Resource DMA Chassis Index
Name
systemResourceDMAchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
98
Table 316. System Resource DMA Index
Name
systemResourceDMAIndex
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.2
Description
Defines the index of system resource DMAs in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 317. System Resource DMA State Capabilities
Name
systemResourceDMAStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.3
Description
Defines the capabilities of this system resource DMA.
Syntax
DellStateCapabilities
Access
Read-only
Table 318. System Resource DMA State Settings
Name
systemResourceDMAStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.4
Description
Defines the state and setting of this system resource DMA.
Syntax
DellStateSettings
Access
Read-only
Table 319. System Resource DMA Status
Name
systemResourceDMAStatus
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.5
Description
Defines the status of this system resource DMA.
Syntax
DellStatus
Access
Read-only
Table 320. System Resource DMA Owner Index Reference
Name
systemResourceDMAOwnerIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.6
Description
Defines the index to the associated system resource owner in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 321. System Resource DMA Share Disposition
Name
systemResourceDMAShareDisposition
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.7
99
Description
Defines the share disposition of the system resource DMA.
Syntax
DellResourceShareDisposition (Resource Share Disposition)
Access
Read-only
Table 322. System Resource DMA Maximum Transfer Size
Name
systemResourceDMAMaximumTransferSize
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.8
Description
Defines the maximum size of a memory transfer in bytes for the system
resource DMA.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 323. System Resource DMA Transfer Width
Name
systemResourceDMATransferWidth
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.9
Description
Defines the transfer width of the system resource DMA.
Syntax
DellResourceDMATransferWidth (Resource DMA Transfer Width)
Access
Read-only
Table 324. System Resource DMA Bus Master
Name
systemResourceDMABusMaster
Object ID
1.3.6.1.4.1.674.10892.1.500.60.1.10
Description
Defines the bus mastering capabilities of the system resource DMA.
Syntax
DellResourceDMABusMaster (Resource DMA Bus Master)
Access
Read-only
System Resource Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 325. System Resource Map Type
Variable Name: DellSystemResourceMapType
Data Type: Integer
Possible Data Values
Meaning of Data Value
other(1)
The system resource map type is not one of the following:
unknown(2)
The system resource map type is unknown (not known or not
monitored).
typeOne(3)
The system resource map is type 1 (one).
100
Table 326. Resource Owner Interface Type
Variable Name: DellResourceOwnerInterfaceType
Data Type: Integer
Possible Data Values
Meaning of Data Value
typeIsOther(1)
The interface type is not one of the following:
typeIsUnknown(2)
The interface type is unknown.
typeIsInternal(3)
The interface type is internal.
typeIsISA(4)
The interface type is an Industry Standard Architecture (ISA) bus.
typeIsEISA(5)
The interface type is an Extended Industry Standard Architecture (EISA)
bus.
typeIsMCA(6)
The interface type is a microchannel architecture (MCA) bus.
typeIsTurboChannel(7)
The interface type is a turbo-channel bus.
Table 327. Resource Share Disposition
Variable Name: DellResourceShareDisposition
Data Type: Integer
Possible Data Values
Meaning of Data Value
shareIsOther(1)
The share disposition is not one of the following:
shareIsUnknown(2)
The share disposition is unknown (not known or not monitored).
shareIsDeviceExclusiv
e(3)
The share disposition is device exclusive.
shareIsDriverExclusiv
e(4)
The share disposition is driver exclusive.
shareIsShared(5)
The share disposition is shared.
Table 328. Resource Memory Flags
Variable Name: DellResourceMemoryFlags
Data Type: Integer
Possible Data Values
Meaning of Data Value
memoryIsReadOnly(1)
The resource memory is read-only.
memoryIsWriteOnly(2)
The resource memory is write-only.
memoryIsPreFetchable(4
)
The resource memory is prefetchable.
memoryIsCombinedWritab
le(8)
The resource memory is read-write.
101
memoryIsF24(16)
The resource memory is F24.
Table 329. Resource Interrupt Type
Variable Name: DellResourceInterruptType
Data Type: Integer
Possible Data Values
Meaning of Data Value
interruptIsLevelSensit
ive(1)
The interrupt type is level sensitive.
interruptIsLatched(2)
The interrupt type is latched.
Table 330. Resource Interrupt Trigger
Variable Name: DellResourceInterruptTrigger
Data Type: Integer
Possible Data Values
Meaning of Data Value
interruptIsActiveWhenL
ow(1)
The interrupt trigger is active on a low signal.
interruptIsActiveWhenH
igh(2)
The interrupt trigger is active on a high signal.
Table 331. Resource DMA Bus Master
Variable Name: DellResourceDMABusMaster
Data Type: Integer
Possible Data Values
Meaning of Data Value
dmaIsOther(1)
The DMA bus master capability is not one of the following:
dmaIsUnknown(2)
The DMA bus master capability is unknown.
dmaIsNotABusmaster(3)
The DMA does not have bus master capability.
Table 332. Resource DMA Transfer Width
Variable Name: DellResourceDMATransferWidth
Data Type: Integer
Possible Data Values
Meaning of Data Value
dmaTransferWidthIsOthe
r(1)
The DMA transfer width is not one of the following:
dmaTransferWidthIsunkn
own(2)
The DMA transfer width is unknown.
dmaTransferWidthIs8Bit
s(3)
The DMA transfer width is 8 bits.
102
dmaTransferWidthIs16Bi
ts(4)
The DMA transfer width is 16 bits.
dmaTransferWidthIs32Bi
ts(5)
The DMA transfer width is 32 bits.
dmaTransferWidthIs64Bi
ts(6)
The DMA transfer width is 64 bits.
dmaTransferWidthIs128B
its(7)
The DMA transfer width is 128 bits.
Power Group
The Power Group provides information about power units (a group of power supplies in a system
chassis), power supplies, and voltage and amperage probes.
NOTE: Power Management features are only available for PowerEdge systems that have hotswappable power supplies and not systems that have a fixed, nonredundant power supply installed.
Power Group Tables
The following management information base (MIB) tables define objects for the Power Group:
•
Power Unit Table
•
Power Supply Table
•
Voltage Probe Table
•
Amperage Probe Table
•
AC Power Switch Table
•
AC Power Cord Table
•
Battery Table
•
Power Usage Table
•
Power ProfileTable
Power Unit Table
Table 333. Power Unit Table
Name
powerUnitTable
Object ID
1.3.6.1.4.1.674.10892.1.600.10
Description
Defines the Power Unit Table.
Syntax
PowerUnitTableEntry
Access
Not accessible
Table 334. Power Unit Table Entry
Name
powerUnitTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1
Description
Defines the Power Unit Table entry.
Syntax
DellObjectRange
103
Access
Read-only
Index
powerUnitchassisIndex, powerUnitIndex
Table 335. Power Unit Chassis Index
Name
powerUnitchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 336. Power Unit Index
Name
powerUnitIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.2
Description
Defines the index of the power unit in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 337. Power Unit State Capabilities
Name
powerUnitStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.3
Description
Defines the capabilities of the power unit.
Syntax
DellStateCapabilities
Access
Read-only
Table 338. Power Unit State Settings
Name
powerUnitStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.4
Description
Defines the state and settings of the power unit.
Syntax
DellStateSettings
Access
Read-only
Table 339. Power Unit Redundancy Status
Name
powerUnitRedundancyStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.5
Description
Defines the redundancy status of the power unit.
Syntax
DellStatusRedundancy
Access
Read-only
104
Table 340. Power Supply Count for Redundancy
Name
powerSupplyCountForRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.6
Description
Defines the total number of power supplies required for this power unit
to have redundancy.
Syntax
DellString
Access
Read-only
Table 341. Power Unit Name
Name
powerUnitName
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.7
Description
Defines the name of the power unit in this chassis.
Syntax
DellString
Access
Read-only
Table 342. Power Unit Status
Name
powerUnitStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.10.1.8
Description
Defines the status of the power unit in this chassis.
Syntax
DellStatus
Access
Read-only
Power Supply Table
Table 343. Power Supply Table
Name
powerSupplyTable
Object ID
1.3.6.1.4.1.674.10892.1.600.12
Description
Defines the Power Supply Table.
Syntax
PowerSupplyTableEntry
Access
Not accessible
Table 344. Power Supply Table Entry
Name
powerSupplyTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1
Description
Defines the Power Supply Table entry.
Syntax
PowerSupplyTableEntry
Access
Not accessible
Index
powerSupplychassisIndex, powerSupplyIndex
105
Table 345. Power Supply Chassis Index
Name
powerSupplychassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 346. Power Supply Index
Name
powerSupplyIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.2
Description
Defines the index of power supply.
Syntax
DellObjectRange
Access
Read-only
Table 347. Power Supply State Capabilities Unique
Name
powerSupplyStateCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.3
Description
Defines the capabilities of the power supply.
Syntax
DellPowerSupplyStateCapabilitiesUnique (Power Supply State
Capabilities Unique)
Access
Read-only
Table 348. Power Supply State Settings Unique
Name
powerSupplyStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.4
Description
Defines the state and settings of the power supply.
Syntax
DellPowerSupplyStateSettingsUnique (Power Supply State Settings
Unique)
Access
Read-only
Table 349. Power Supply Status
Name
powerSupplyStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.5
Description
Defines the status of the power supply.
Syntax
DellStatus
Access
Read-only
106
Table 350. Power Supply Output Watts
Name
powerSupplyOutputWatts
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.6
Description
Defines the maximum sustained output wattage of the power supply in
tenths of watts.
Syntax
DellSigned32BitRange
Access
Read-only
Table 351. Power Supply Type
Name
powerSupplyType
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.7
Description
Defines the type of power supply.
Syntax
DellPowerSupplyType (Power Supply Type Definitions)
Access
Read-only
Table 352. Power Supply Location Name
Name
powerSupplyLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.8
Description
Defines the location name of the power supply.
Syntax
DellString
Access
Read-only
Table 353. Power Supply Input Voltage
Name
powerSupplyInputVoltage
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.9
Description
Defines the input voltage to the power supply in volts.
Syntax
DellSigned32BitRange
Access
Read-only
Table 354. Power Supply Power Unit Index Reference
Name
powerSupplypowerUnitIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.10
Description
Defines the index to the associated system power unit in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 355. Power Supply Sensor State
Name
powerSupplySensorState
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.11
107
Description
Defines the state reported by the power supply sensor, and supplements
the state and settings of the power supply.
Syntax
DellPowerSupplySensorState (Power Supply Sensor State)
Access
Read-only
Table 356. Power Supply Configuration Error Type
Name
powerSupplyConfigurationErrorType
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.12
Description
Defines the type of configuration error reported by the power supply
sensor.
Syntax
DellPowerSupplyConfigurationErrorType (Power Supply Configuration
Error Type)
Access
Read-only
Table 357. Power Supply Power Monitor Capable
Name
powerSupplyPowerMonitorCapable
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.13
Description
Defines a boolean value that reports whether the power supply is
capable of monitoring power consumption.
Syntax
DellBoolean
Access
Read-only
Table 358. Power Supply Rated Input Wattage
Name
powerSupplyRatedInputWattage
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.14
Description
Defines the rated input wattage of the power supply (in tenths of Watts.)
Syntax
DellSigned32BitRange
Access
Read-only
Voltage Probe Table
Table 359. Voltage Probe Table
Name
voltageProbeTable
Object ID
1.3.6.1.4.1.674.10892.1.600.20
Description
Defines the Voltage Probe Table.
Syntax
VoltageProbeTableEntry
Access
Not accessible
Table 360. Voltage Probe Table Entry
Name
voltageProbeTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1
108
Description
Defines the Voltage Probe Table entry.
Syntax
VoltageProbeTableEntry
Access
Not accessible
Index
voltageProbechassisIndex, voltageProbeIndex
Table 361. Voltage Probe Chassis Index
Name
voltageProbechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 362. Voltage Probe Index
Name
voltageProbeIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.2
Description
Defines the index of voltage probes in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 363. Voltage Probe State Capabilities
Name
voltageProbeStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.3
Description
Defines the capabilities of the voltage probe.
Syntax
DellStateCapabilities
Access
Read-only
Table 364. Voltage Probe State Settings
Name
voltageProbeStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.4
Description
Defines the state and settings of the voltage probe.
Syntax
DellStateSettings
Access
Read-only
Table 365. Voltage Probe Status
Name
voltageProbeStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.5
Description
Defines the status of the voltage probe.
Syntax
DellStatusProbe
109
Access
Read-only
Table 366. Voltage Probe Reading
Name
voltageProbeReading
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.6
Description
Defines the value of the voltage probe reading. The value is an integer
representing the voltage in millivolts that the probe is reading. When the
value for voltageProbeType is voltageProbeTypeIsDiscrete, a value is not
returned for this attribute.
Syntax
DellSigned32BitRange
Access
Read-only
Table 367. Voltage Probe Type
Name
voltageProbeType
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.7
Description
Defines the type of the voltage probe.
Syntax
DellVoltageType
Access
Read-only
Table 368. Voltage Probe Location Name
Name
voltageProbeLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.8
Description
Defines the location of the voltage probe in this chassis.
Syntax
DellString
Access
Read-only
Table 369. Voltage Probe Upper Nonrecoverable Threshold
Name
voltageProbeUpperNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.9
Description
Defines the value of the voltage probe’s upper nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 370. Voltage Probe Upper Critical Threshold
Name
voltageProbeUpperCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.10
Description
Defines the value of the voltage probe’s upper critical threshold.
Syntax
DellSigned32BitRange
110
Access
Read-only
Table 371. Voltage Probe Upper Noncritical Threshold
Name
voltageProbeUpperNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.11
Description
Defines the user-assigned value of the voltage probe’s upper noncritical
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 372. Voltage Probe Lower Noncritical Threshold
Name
voltageProbeLowerNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.12
Description
Defines the user-assigned value of the voltage probe’s lower noncritical
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 373. Voltage Probe Lower Critical Threshold
Name
voltageProbeLowerCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.13
Description
Defines the value of the voltage probe’s lower critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 374. Voltage Probe Lower Nonrecoverable Threshold
Name
voltageProbeLowerNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.14
Description
Defines the value of the voltage probe’s lower nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 375. Voltage Probe Capabilities
Name
voltageProbeProbeCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.15
Description
Defines the probe capabilities of the voltage probe.
Syntax
DellProbeCapabilities
Access
Read-only
111
Table 376. Voltage Probe Discrete Reading
Name
voltageProbeDiscreteReading
Object ID
1.3.6.1.4.1.674.10892.1.600.20.1.16
Description
Defines the reading for a voltage probe of type
voltageProbeTypeIsDiscrete.
When the value for voltageProbeType is other than
voltageProbeTypeIsDiscrete, a value is not returned for this attribute.
When the value for voltageProbeType is voltageProbeTypeIsDiscrete,
the value returned for this attribute is the discrete reading for the probe.
Syntax
DellVoltageDiscreteReading
Access
Read-only
Amerage Probe Table
Table 377. Amerage Probe Table
Name
amperageProbeTable
Object ID
1.3.6.1.4.1.674.10892.1.600.30
Description
Defines the Amperage Probe Table.
Syntax
SEQUENCE OF AmperageProbeTableEntry
Access
Not accessible
Table 378. Amperage Probe Table Entry
Name
amperageProbeTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1
Description
Defines the Amperage Probe Table entry.
Syntax
AmperageProbeTableEntry
Access
Not accessible
Index
amperageProbechassisIndex
,
amperageProbeIndex
Table 379. Amperage Probe Chassis Index
Name
amperageProbechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 380. Amperage Probe Index
Name
amperageProbeIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.2
112
Description
Defines the index of amperage probes in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 381. Amperage Probe State Capabilities
Name
amperageProbeStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.3
Description
Defines the capabilities of the amperage probe.
Syntax
DellStateCapabilities
Access
Read-only
Table 382. Amperage Probe State Settings
Name
amperageProbeStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.4
Description
Defines the state and settings of the amperage probe.
Syntax
DellStateSettings
Access
Read-only
Table 383. Amperage Probe Status
Name
amperageProbeStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.5
Description
Defines the status of the amperage probe.
Syntax
DellSigned32BitRange
Access
Read-only
Table 384. Amperage Probe Reading
Name
amperageProbeReading
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.6
Description
Defines the reading for an amperage probe of type other than
amperageProbeTypeIsDiscrete.
When the value for amperageProbeType is
amperageProbeTypeIsPowerSupplyAmps or
amperageProbeTypeIsSystemAmps, the value returned for this attribute
is the power usage that the probe is reading in tenths of Amperes.
When the value for amperageProbeType is
amperageProbeTypeIsPowerSupplyWatts or
amperageProbeTypeIsSystemWatts, the value returned for this attribute
is the power usage that the probe is reading in Watts.
When the value for amperageProbeType is other than
amperageProbeTypeIsDiscrete,
amperageProbeTypeIsPowerSupplyAmps,
amperageProbeTypeIsPowerSupplyWatts,
amperageProbeTypeIsSystemAmps, or
113
amperageProbeTypeIsSystemWatts, the value returned for this attribute
is the amperage that the probe is reading in Milliamps.
When the value for amperageProbeType is
amperageProbeTypeIsDiscrete, a value is not returned for this attribute.
Syntax
DellSigned32BitRange
Access
Read-only
Table 385. Amperage Probe Type
Name
amperageProbeType
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.7
Description
Defines the type of the amperage probe.
Syntax
DellAmperageProbeType
Access
Read-only
Table 386. Amperage Probe Location Name
Name
amperageProbeLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.8
Description
Defines the location name of the amperage probe in this chassis.
Syntax
DellString
Access
Read-only
Table 387. Amperage Probe Upper Nonrecoverable Threshold
Name
amperageProbeUpperNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.9
Description
Defines the value of the amperage probe’s upper nonrecoverable
threshold. The value is an integer representing the amperage in
milliamperes that the probe is reading.
Syntax
DellSigned32BitRange
Access
Read-only
Table 388. Amperage Probe Upper Critical Threshold
Name
amperageProbeUpperCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.10
Description
Defines the value of the amperage probe’s upper critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 389. Amperage Probe Upper Noncritical Threshold
Name
amperageProbeUpperNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.11
114
Description
Defines the user-assigned value of the amperage probe’s upper critical
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 390. Amperage Probe Lower Noncritical Threshold
Name
amperageProbeLowerNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.12
Description
Defines the user-assigned value of the amperage probe’s lower
noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 391. Amperage Probe Lower Critical Threshold
Name
amperageProbeLowerCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.13
Description
Defines the value of the amperage probe’s lower critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 392. Amperage Probe Lower Nonrecoverable Threshold
Name
amperageProbeLowerNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.14
Description
Defines the value of the amperage probe’s lower nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 393. Amperage Probe Probe Capabilities
Name
amperageProbeProbeCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.15
Description
Defines the probe capabilities of the amperage probe.
Syntax
DellProbeCapabilities
Access
Read-only
Table 394. Amperage Probe Discrete Reading
Name
amperageProbeDiscreteReading
Object ID
1.3.6.1.4.1.674.10892.1.600.30.1.16
Description
Defines the reading for a amperage probe of type
amperageProbeTypeIsDiscrete.
115
When the value for amperageProbeType is other than
amperageProbeTypeIsDiscrete, a value is not returned for this attribute.
When the value for amperageProbeType is
amperageProbeTypeIsDiscrete, the value returned for this attribute is
the discrete reading for the probe.
Syntax
DellAmperageDiscreteReading (Amperage Probe Discrete Reading)
Access
Read-only
AC Power Switch Table
Table 395. AC Power Switch Table
Name
aCPowerSwitchTable
Object ID
1.3.6.1.4.1.674.10892.1.600.40
Description
Defines the AC Power Switch Table.
Syntax
SEQUENCE OF ACPowerSwitchTableEntry
Access
Not accessible
Table 396. AC Power Switch Table Entry
Name
aCPowerSwitchTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1
Description
Defines the AC Power Switch Table entry.
Syntax
ACPowerSwitchTableEntry
Access
Not accessible
Index
aCPowerSwitchchassisIndex
,
aCPowerSwitchIndex
Table 397. AC Power Switch Chassis Index
Name
aCPowerSwitchChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.1
Description
Defines the index (one-based) of the chassis containing this AC power
switch.
Syntax
DellObjectRange
Access
Read-only
Table 398. AC Power Switch Index
Name
aCPowerSwitchIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.2
Description
Defines the index (one-based) of this AC power switch.
Syntax
DellObjectRange
Access
Read-only
116
Table 399. AC Power Switch Capabilities
Name
aCPowerSwitchCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.3
Description
Defines the capabilities of this AC power switch.
Syntax
DellACPowerSwitchCapabilities
Access
Read-only
Table 400. AC Power Switch Settings
Name
aCPowerSwitchSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.4
Description
Defines the settings of this AC power switch.
Syntax
DellACPowerSwitchSettings
Access
Read-only
Table 401. AC Power Switch Redundancy Status
Name
aCPowerSwitchRedundancyStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.5
Description
Defines the redundancy status of this AC power switch.
Syntax
DellStatusRedundancy
Access
Read-only
Table 402. AC Power Cord Count for Redundancy
Name
aCPowerCordCountForRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.6
Description
Defines the total number of AC power cords required for this AC power
switch to have redundancy.
Syntax
DellObjectRange
Access
Read-only
Table 403. AC Power Switch Name
Name
aCPowerSwitchName
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.7
Description
Defines the name of this AC power switch.
Syntax
DellString
Access
Read-only
Table 404. AC Power Switch Redundancy Mode
Name
aCPowerSwitchRedundancyMode
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.8
117
Description
Defines the redundancy mode of this AC power switch.
Syntax
DellACPowerSwitchRedundancyMode
Access
Read-only
Table 405. AC Power Switch Status
Name
aCPowerSwitchStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.40.1.9
Description
Defines the status of this AC power switch.
Syntax
DellStatus
Access
Read-only
AC Power Cord Table
Table 406. AC Power Cord Table
Name
aCPowerCordTable
Object ID
1.3.6.1.4.1.674.10892.1.600.42
Description
Defines the AC Power Cord Table.
Syntax
SEQUENCE OF ACPowerCordTableEntry
Access
Not accessible
Table 407. AC Power Cord Table Entry
Name
aCPowerCordTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1
Description
Defines the AC Power Cord Table entry.
Syntax
ACPowerCordTableEntry
Access
Not accessible
Index
aCPowerCordchassisIndex
,
aCPowerCordIndex
Table 408. AC Power Cord Chassis Index
Name
aCPowerCordChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.1
Description
Defines the index (one-based) of the chassis containing this AC power
cord.
Syntax
DellObjectRange
Access
Read-only
118
Table 409. AC Power Cord Index
Name
aCPowerCordIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.2
Description
Defines the index (one-based) of this AC power cord.
Syntax
DellObjectRange
Access
Read-only
Table 410. AC Power Cord State Capabilities
Name
aCPowerCordStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.3
Description
Defines the capabilities of this AC power cord.
Syntax
DellACPowerCordStateCapabilities
Access
Read-only
Table 411. AC Power Cord State Settings
Name
aCPowerCordStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.4
Description
Defines the settings of this AC power cord.
Syntax
DellACPowerCordStateSettings
Access
Read-only
Table 412. AC Power Cord Status
Name
aCPowerCordStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.5
Description
Defines the status of this AC power cord.
Syntax
DellStatus
Access
Read-only
Table 413. AC Power Cord AC Power Switch Index Reference
Name
aCPowerCordaCPowerSwitchIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.6
Description
Defines the index (one-based) to the associated AC power switch for
this AC power cord.
Syntax
DellObjectRange
Access
Read-only
Table 414. AC Power Cord Location Name
Name
aCPowerCordLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.42.1.7
119
Description
Defines the location name of this AC power cord.
Syntax
DellString
Access
Read-only
Battery Table
Table 415. Battery Table
Name
batteryTable
Object ID
1.3.6.1.4.1.674.10892.1.600.50
Description
Defines the Battery Table.
Syntax
SEQUENCE OF BatteryTableEntry
Access
Not accessible
Table 416. Battery Table Entry
Name
batteryTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1
Description
Defines the Battery Table Entry.
Syntax
BatteryTableEntry
Access
Not accessible
Index
batteryChassisIndex , batteryIndex
Table 417. Battery Chassis Index
Name
batteryChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.1
Description
Defines the index (one-based) of the chassis that contains the battery.
Syntax
DellObjectRange
Access
Read-only
Table 418. Battery Index
Name
batteryIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.2
Description
Defines the index (one-based) of the battery.
Syntax
DellObjectRange
Access
Read-only
Table 419. Battery State Capabilities
Name
batteryStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.3
Description
Defines the state capabilities of the battery.
Syntax
DellStateCapabilities
120
Access
Read-only
Table 420. Battery State Settings
Name
batteryStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.4
Description
Defines the state settings of the battery.
Syntax
DellStateSettings
Access
Read-only
Table 421. Battery Status
Name
batteryStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.5
Description
Defines the status of the battery.
Syntax
DellStatus
Access
Read-only
Table 422. Battery Reading
Name
batteryReading
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.6
Description
Defines the reading of the battery.
Syntax
DellBatteryReading (Battery Reading)
Access
Read-only
Table 423. Battery Location Name
Name
batteryLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.7
Description
Defines the location of the battery.
Syntax
DellString
Access
Read-only
Power Usage Table
Table 424. Power Usage Table
Name
powerUsageTable
Object ID
1.3.6.1.4.1.674.10892.1.600.60
Description
Defines the Power Usage Table.
Syntax
SEQUENCE OF PowerUsageTableEntry
Access
Not accessible
121
Table 425. Power Usage Table Entry
Name
powerUsageTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1
Description
Defines the Power Usage Table Entry.
Syntax
PowerUsageTableEntry
Access
Not accessible
Index
powerUsageChassisIndex , powerUsageIndex
Table 426. Power Usage Chassis Index
Name
powerUsageChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
Table 427. Power Usage Index
Name
powerUsageIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.2
Description
Defines the index (one-based) of the power usage information.
Syntax
DellObjectRange
Access
Read-only
Table 428. Power Usage State Capabilities
Name
powerUsageStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.3
Description
Defines the state capabilities of the power usage information.
Syntax
DellStateCapabilities
Access
Read-only
Table 429. Power Usage State Settings
Name
powerUsageStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.4
Description
Defines the state settings of the power usage information.
Syntax
DellStateSettings
Access
Read-only
122
Table 430. Power Usage Status
Name
powerUsageStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.5
Description
Defines the status of the power usage information.
Syntax
DellStatus
Access
Read-only
Table 431. Power Usage Entity Name
Name
powerUsageEntityName
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.6
Description
Defines the name of the entity associated with this power usage
information.
Syntax
DellString
Access
Read-only
Table 432. Power Usage Cumulative Wattage
Name
powerUsageCumulativeWattage
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.7
Description
Defines the total wattage used (in Watt-hours) by this entity since the
date and time specified by the
powerUsageCumulativeWattageStartDateName attribute.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 433. Power Usage Cumulative Wattage Start Date Name
Name
powerUsageCumulativeWattageStartDateName
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.8
Description
Defines the date and time at which the data collection started for the
value reported by the powerUsageCumulativeWattage attribute.
Syntax
DellDateName
Access
Read-only
Table 434. Power Usage Peak Watts
Name
powerUsagePeakWatts
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.9
Description
Defines the peak wattage reading (in Watts) for this entity since the date
and time specified by the powerUsagePeakWattsStartDateName
attribute.
Syntax
DellUnsigned32BitRange
Access
Read-only
123
Table 435. Power Usage Peak Watts Start Date Name
Name
powerUsagePeakWattsStartDateName
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.10
Description
Defines the date and time at which the data collection started for the
value reported by the powerUsagePeakWatts attribute.
Syntax
DellDateName
Access
Read-only
Table 436. Power Usage Peak Watts Reading Date Name
Name
powerUsagePeakWattsReadingDateName
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.11
Description
Defines the date and time at which the value reported by the
powerUsagePeakWatts attribute was measured.
Syntax
DellDateName
Access
Read-only
Table 437. Power Usage Peak Amps
Name
powerUsagePeakAmps
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.12
Description
Defines the peak amperage reading (in tenths of Amps) for this entity
since the date and time specified by the
powerUsagePeakAmpsStartDateName attribute.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 438. Power Usage Peak Amps Start Date Name
Name
powerUsagePeakAmpsStartDateName
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.13
Description
Defines the date and time at which the data collection started for the
value reported by the powerUsagePeakAmps attribute.
Syntax
DellDateName
Access
Read-only
Table 439. Power Usage Peak Amps Reading Date Name
Name
powerUsagePeakAmpsReadingDateName
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.14
Description
Defines the date and time at which the value reported by the
powerUsagePeakAmps attribute was measured.
Syntax
DellDateName
Access
Read-only
124
Table 440. Power Usage Idle Power
Name
powerUsageIdlePower
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.15
Description
Defines the system idle power (in Watts). This is the minimum power the
system can consume based on the current hardware configuration.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 441. Power Usage Max Potential Power
Name
powerUsageMaxPotentialPower
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.16
Description
Defines the maximum potential power (in Watts) of the system. This is
the maximum power the system can consume based on the current
hardware configuration.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 442. Power Usage Power Cap Capabilities
Name
powerUsagePowerCapCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.17
Description
Defines the system power cap capabilities.
Syntax
DellPowerCapCapabilities
Access
Read-only
Table 443. Power Usage Power Cap Setting
Name
powerUsagePowerCapSetting
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.18
Description
Defines the system power cap setting.
Syntax
DellPowerCapSetting
Access
Read-only
Table 444. Power Usage Power Cap Value
Name
powerUsagePowerCapValue
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.19
Description
Defines the system power cap value (in Watts).
Syntax
DellUnsigned32BitRange
Access
Read-only
125
Table 445. Power Usage Instantaneous Headroom
Name
powerUsageInstantaneousHeadroom
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.20
Description
Defines the system instantaneous headroom (in Watts). This is the
theoretical maximum power drawn by the power supply minus
instantaneous power draw.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 446. Power Usage Peak Headroom
Name
powerUsagePeakHeadroom
Object ID
1.3.6.1.4.1.674.10892.1.600.60.1.21
Description
Defines the system peak headroom (in Watts). This is the theoretical
maximum power drawn by the power supply minus peak power draw.
Syntax
DellUnsigned32BitRange
Access
Read-only
Power Profile Table
Table 447. Power Profile Table
Name
powerProfileTable
Object ID
1.3.6.1.4.1.674.10892.1.600.70
Description
Defines the Power Profile Table.
Syntax
SEQUENCE OF PowerProfileTableEntry
Access
Not accessible
Table 448. Power Profile Table Entry
Name
powerProfileTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1
Description
Defines the Power Profile Table Entry.
Syntax
PowerProfileTableEntry
Access
Not accessible
Index
powerProfileChassisIndex , powerProfileIndex
Table 449. Power Profile Chassis Index
Name
powerProfileChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
126
Table 450. Power Profile Index
Name
powerProfileIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.2
Description
Defines the index (one-based) of the power profile information.
Syntax
DellObjectRange
Access
Read-only
Table 451. Power Profile Supported Profiles
Name
powerProfileSupportedProfiles
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.3
Description
Defines the supported power profiles.
Syntax
DellPowerProfileType
Access
Read-only
Table 452. Power Profile Setting
Name
powerProfileSetting
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.4
Description
Defines the power profile setting.
Syntax
DellPowerProfileType
Access
Read-only
Table 453. Power Profile Custom CPU Management Capabilities
Name
powerProfileCustomCPUManagementCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.5
Description
Defines the custom CPU power and performance management
capabilities that are available for the Custom power profile.
Syntax
DellCPUPowerPerformanceManagementType
Access
Read-only
Table 454. Power Profile Custom CPU Management Setting
Name
powerProfileCustomCPUManagementSetting
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.6
Description
Defines the custom CPU power and performance management setting
for the Custom power profile.
Syntax
DellCPUPowerPerformanceManagementType
Access
Read-only
127
Table 455. Power Profile Custom Memory Management Capabilities
Name
powerProfileCustomMemoryManagementCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.7
Description
Defines the custom memory power and performance management
capabilities that are available for the Custom power profile.
Syntax
DellMemoryPowerPerformanceManagementType
Access
Read-only
Table 456. Power Profile Custom Memory Management Capabilities
Name
powerProfileCustomMemoryManagementSetting
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.8
Description
Defines the custom memory power and performance management
setting for the Custom power profile.
Syntax
DellMemoryPowerPerformanceManagementType
Access
Read-only
Table 457. Power Profile Custom Fan Management Capabilities
Name
powerProfileCustomFanManagementCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.9
Description
Defines the custom fan power and performance management
capabilities that are available for the Custom power profile.
Syntax
DellFanPowerPerformanceManagementType
Access
Read-only
Table 458. Power Profile Custom Fan Management Setting
Name
powerProfileCustomFanManagementSetting
Object ID
1.3.6.1.4.1.674.10892.1.600.70.1.10
Description
Defines the custom fan power and performance management setting
for the Custom power profile.
Syntax
DellFanPowerPerformanceManagementType
Access
Read-only
Power Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 459. Power Supply State Capabilities Unique
Variable Name: DellPowerSupplyStateCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The power supply’s capabilities are unknown.
128
onlineCapable(2)
The power supply can be disabled (offline, a binary
0 value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The power supply’s capabilities are not ready.
Table 460. Power Supply State Settings Unique
Variable Name: DellPowerSupplyStateSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The power supply’s capabilities are unknown.
onLine(2)
The power supply’s state is disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReady(4)
The power supply’s state is not ready.
fanFailure(8)
The power supply fan has failed.
onlineAndFanFailure(10)
The power supply is online and indicating that its
fan is not working.
powerSupplyIsON(16)
The power supply is indicating that it is on.
powerSupplyIsOk(32)
The power supply is indicating that it is OK.
acSwitchIsON(64)
The power supply is indicating that the AC power
switch is on.
onlineandAcSwitchIsON (66)
The power supply is online and indicating that the
AC power supply switch capability is activated.
acPowerIsON(128)
The power supply is indicating that the AC power is
on.
onlineAndAcPowerIsON (130)
The power supply is online and indicating that the
AC power is on.
onlineAndPredictiveFail ure(210)
The power supply is online and indicating that it
has a problem.
acPowerAndSwitchAreOn
PowerSupplyIsOnIsOkAnd Online(242)
The power supply is online and OK.
Table 461. Power Supply Type Definitions
Variable Name: DellPowerSupplyType
Data Type: Integer
Possible Data Values
Meaning of Data Value
powerSupplyTypeIsOther(1)
The power supply type is not one of the following:
powerSupplyTypeIsUnknown(2)
The power supply type is unknown (not known or
not monitored).
powerSupplyTypeIsLinear(3)
The power supply type is a linear power supply.
129
powerSupplyTypeIsSwitching(4)
The power supply type is a switching power
supply.
powerSupplyTypeIsBattery(5)
The power supply type is a battery.
powerSupplyTypeIsUPS(6)
The power supply type is an uninterruptable power
supply.
powerSupplyTypeIsConverter(7)
The power supply type is a power converter power
supply.
powerSupplyTypeIsRegulator(8)
The power supply type is a regulator power supply.
powerSupplyTypeIsAC(9)
The power supply type is an AC power supply.
powerSupplyTypeIsDC(10)
The power supply type is a DC power supply.
powerSupplyTypeIsVRM(11)
The power supply type is a voltage regulator
module (VRM) power supply.
Table 462. Power Supply Sensor State
Variable Name: DellPowerSupplySensorState
Data Type: Integer
Possible Data Values
Meaning of Data Value
presenceDetected(1)
The power supply’s presence is detected.
psFailureDetected(2)
The power supply failure is detected.
predictiveFailure(4)
The power supply sensor detects predictive failure
psACLost(8)
The power supply’s AC power is lost.
acLostOrOutOfRange(16)
The power supply’s AC power is lost or out of
range.
acOutOfRangeButPresent(32)
The power supply’s AC power is present, but it is
out of range.
configurationError(64)
The power supply sensor detects a configuration
error.
Table 463. Power Supply Configuration Error Type
Variable Name: DellPowerSupplyConfigurationErrorType
Data Type: Integer
Possible Data Values
Meaning of Data Value
vendorMismatch(1)
The power supply configuration error type is
vendor mismatch.
revisionMismatch(2)
The power supply configuration error type is
revision mismatch.
130
processorMissing(3)
The power supply configuration error type is
processor missing.
Table 464. Voltage Probe Type
Variable Name: DellVoltageType
Data Type: Integer
Possible Data Values
Meaning of Data Value
voltageProbeTypeIsOther(1)
The voltage probe type is not one of the following:
voltageProbeTypeIsUnknown(2)
The voltage probe type is unknown (not known or
not monitored).
voltageProbeTypeIs1Point5Volt (3)
The voltage probe type is a 1.5-volt (V) probe.
voltageProbeTypeIs3Point3Volt (4)
The voltage probe type is a 3.3-V probe.
voltageProbeTypeIs5Volt(5)
The voltage probe type is a 5-V probe.
voltageProbeTypeIsMinus5Volt (6)
The voltage probe type is a –5-V probe.
voltageProbeTypeIs12Volt(7)
The voltage probe type is a 12-V probe.
voltageProbeTypeIsMinus12Volt (8)
The voltage probe type is a –12-V probe.
voltageProbeTypeIsIO(9)
The voltage probe type is an I/O volt probe.
voltageProbeTypeIsCore(10)
The voltage probe type is a core volt probe.
voltageProbeTypeIsFLEA(11)
The voltage probe type is a FLEA (standby) volt
probe.
voltageProbeTypeIsBattery(12)
The voltage probe type is a battery volt probe.
voltageProbeTypeIsTerminator (13)
The voltage probe type is a SCSI termination volt
probe.
voltageProbeTypeIs2Point5Volt (14)
The voltage probe type is a 2.5-V probe.
voltageProbeTypeIsGTL(15)
The voltage probe type is a ground termination
logic (GTL) probe.
voltageProbeTypeIsDiscrete(16)
The voltage probe type is a voltage probe with
discrete reading.
Table 465. Voltage Probe Discrete Reading
Variable Name: DellVoltageDiscreteReading
Data Type: Integer
Possible Data Values
Meaning of Data Value
voltageIsGood(1)
The voltage probe discrete reading is good.
voltageIsBad(2)
The voltage probe discrete reading is bad.
131
Table 466. Amperage Probe Definitions
Variable Name: DellAmperageType
Data Type: Integer
Possible Data Values
Meaning of Data Value
amperageProbeTypeIsOther(1)
The amperage probe type is not one of the
following:
amperageProbeTypeIsUnknown(2)
The amperage probe type is unknown (not known
or not monitored).
amperageProbeTypeIs1Point5Volt(3)
The amperage probe type is a 1.5-ampere (A)
probe.
amperageProbeTypeIs3Point3volt(4)
The amperage probe type is a 3.3-A probe.
amperageProbeTypeIs5Volt(5)
The amperage probe type is a 5-A probe.
amperageProbeTypeIsMinus5Volt(6)
The amperage probe type is a –5-A probe.
amperageProbeTypeIs12Volt(7)
The amperage probe type is a 12-A probe.
amperageProbeTypeIsMinus12Volt(8)
The amperage probe type is a –12-A probe.
amperageProbeTypeIsIO(9)
The amperage probe type is an I/O amperage
probe.
amperageProbeTypeIsCore(10)
The amperage probe type is a core amperage
probe.
amperageProbeTypeIsFLEA(11)
The amperage probe type is a FLEA (standby)
amperage probe.
amperageProbeTypeIsBattery(12)
The amperage probe type is a battery amperage
probe.
amperageProbeTypeIsTerminator(13)
The amperage probe type is a Small Computer
System Interface (SCSI) termination amperage
probe.
amperageProbeTypeIs2Point5Volt(14)
The amperage probe type is a 2.5-V amperage
probe.
amperageProbeTypeIsGTL(15)
The amperage probe type is a Gunning Transceiver
Logic (GTL) probe.
amperageProbeTypeIsDiscrete(16)
The amperage probe type is an amperage probe
with discrete reading.
amperageProbeTypeIsPowerSupplyAmps(23)
The amperage probe type is power supply probe
with reading in Amperes.
amperageProbeTypeIsPowerSupplyWatts
(24)
The amperage probe type is power supply probe
with reading in Watts.
amperageProbeTypeIsSystemAmps(25)
The amperage probe type is system probe with
reading in Amperes.
132
amperageProbeTypeIsSystemWatts(26)
The amperage probe type is system probe with
reading in Watts.
Table 467. Amperage Probe Discrete Reading
Variable Name: DellAmperageDiscreteReading
Data Type: Integer
Possible Data Values
Meaning of Data Value
amperageIsGood(1)
The amperage probe discrete reading is good.
amperageIsBad(2)
The amperage probe discrete reading is bad.
Table 468. AC Power Switch Capabilities
Variable Name: DellACPowerSwitchCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknownCapabilities(1)
The AC power switch’s capabilities are unknown.
inputSourceCord1NoReturnCapable(2)
Input source is AC power cord 1, with no return.
inputSourceCord1ReturnCapable(4)
Input source is AC power cord 1, with return.
inputSourceCord2NoReturnCapable(8)
Input source is AC power cord 2, with no return.
inputSourceCord2ReturnCapable(16)
Input source is AC power cord 2, with return.
inputSourceSharedCapable(32)
Input source is shared.
Table 469. AC Power Switch Settings
Variable Name: DellACPowerSwitchSettings
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The AC power switch’s settings are unknown.
inputSourceCord1NoReturn(2)
Input source is AC power cord 1, with no return.
inputSourceCord1Return(4)
Input source is AC power cord 1, with return.
inputSourceCord2NoReturn(8)
Input source is AC power cord 2, with no return.
inputSourceCord2Return(16)
Input source is AC power cord 2, with return.
inputSourceShared(32)
Input source is shared.
Table 470. AC Power Switch Redundancy Mode
Variable Name: DellACPowerSwitchRedundancyMode
Data Type: Integer
Possible Data Values
Meaning of Data Value
133
nonRedundant(1)
The AC power switch is not expecting redundancy.
redundant(2)
The AC power switch is expecting redundancy.
Table 471. AC Power Cord State Capabilities
Variable Name: DellACPowerCordStateCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The AC power cord’s capabilities are unknown.
onlineCapable(2)
The AC power cord can be disabled (offline) or
enabled (online).
notReadyCapable(4)
The AC power cord’s capabilities are not ready.
Table 472. AC Power Cord State Settings
Variable Name: DellACPowerCordStateSettings
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The AC power cord’s state is unknown.
online(2)
The AC power cord’s state is disabled (offline) 0 or
enabled (online) 1.
notReady(4)
The AC power cord’s state is not ready.
acPowerCordHasPower (8)
The AC power cord has power.
acPowerCordIsActive Source(16)
The AC power cord is the active source of AC
power.
Table 473. Battery Reading
Variable Name: DellBatteryReading
Data Type: Integer
NOTE: These values are bit masks, so combination values are possible.
Possible Data Values
Meaning of Data Value
predictiveFailure(1)
Battery sensor detects predictive failure.
failed(2)
Battery has failed.
presenceDetected(4)
Battery presence is detected.
Table 474. Power Cap Capabilities
Variable Name: DellPowerCapCapabilities
Data Type: Integer
134
NOTE: These values are bit masks, so combination values are possible.
Possible Data Values
Meaning of Data Value
none(0)
No power cap capabilities are available.
enable(1)
Power cap can be enabled.
disable(2)
Power cap can be disabled.
Table 475. Power Cap Setting
Variable Name: DellPowerCapSetting
Data Type: Integer
Possible Data Values
Meaning of Data Value
disabled(0)
Power cap is disabled.
enabled(1)
Power cap is enabled.
Table 476. Power Profile Type
Variable Name: DellPowerProfileType
Data Type: Integer
NOTE: These values are bit masks, so combination values are possible.
Possible Data Values
Meaning of Data Value
maxPerformance(1)
Power profile type is Maximum Performance.
osControl(2)
Power profile type is OS control.
activePowerController(4)
Power profile type is Active Power Controller.
custom(8)
Power profile type is Custom.
Table 477. CPU Power Performance Management Type
Variable Name: DellCPUPowerPerformanceManagementType
Data Type: Integer
NOTE:
These values are bit masks, so combination values are possible.
Possible Data Values
Meaning of Data Value
maxPerformance(1)
CPU power and performance management type is
Maximum Performance.
minPower(2)
CPU power and performance management type is
Minimum Power.
osDBPM(4)
CPU power and performance management type is
OS Demand Based Power Management.
135
systemDBPM(8)
CPU power and performance management type is
System Demand Based Power Management.
Table 478. Memory Power Performance Management Type
Variable Name: DellMemoryPowerPerformanceManagementType
Data Type: Integer
NOTE:
These values are bit masks, so combination values are possible.
Possible Data Values
Meaning of Data Value
maxPerformance(1)
Memory power and performance management
type is Maximum Performance.
mhz1333(2)
Memory power and performance is 1333 MHz. .
mhz1067(4)
Memory power and performance is 1067 MHz.
mhz800(8)
Memory power and performance is 800 MHz.
minPower(16)
Memory power and performance management
type is Minimum Power.
Table 479. Fan Power Performance Management Type
Variable Name: DellFanPowerPerformanceManagementType
Data Type: Integer
NOTE:
These values are bit masks, so combination values are possible.
Possible Data Values
Meaning of Data Value
maxPerformance(1)
Fan power and performance management type is
Maximum Performance.
minPower(2)
Fan power and performance management type is
Minimum Power.
Thermal Group
The Thermal Group provides information about cooling units, cooling devices, and temperature probes.
Cooling units are sets of fans or other cooling devices in a system chassis. Thermal Group variables
include threshold values and types of cooling devices and temperature probes.
Thermal Group Tables
The following management information base (MIB) tables define the objects in the Thermal Group:
•
Cooling Unit Table
•
Cooling Device Table
136
•
Temperature Probe Table
Cooling Unit Table
Table 480. Cooling Unit Table
Name
coolingUnitTable
Object ID
1.3.6.1.4.1.674.10892.1.700.10
Description
Defines the Cooling Unit Table.
Syntax
TableEntry
Access
Not accessible
Table 481. Cooling Unit Table Entry
Name
coolingUnitTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1
Description
Defines the Cooling Unit Table entry.
Syntax
TableEntry
Access
Not accessible
Index
coolingUnitchassisIndex
,
coolingUnitIndex
Table 482. Cooling Unit Chassis Index
Name
coolingUnitchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
TableEntry
Access
Read-only
Table 483. Cooling Unit Index
Name
coolingUnitIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.2
Description
Defines the index (one-based) of cooling units.
Syntax
DellObjectRange
Access
Read-only
Table 484. Cooling Unit State Capabilities
Name
coolingUnitStateCapabilties
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.3
Description
Defines the capabilities of the cooling unit.
Syntax
DellStateCapabilities
137
Access
Read-only
Table 485. Cooling Unit State Settings
Name
coolingUnitStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.4
Description
Defines the state and settings of the cooling unit.
Syntax
DellStateSettings
Access
Read-only
Table 486. Cooling Unit Redundancy Status
Name
coolingUnitRedundancyStatus
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.5
Description
Defines the redundancy status of the cooling unit.
Syntax
DellStatusRedundancy
Access
Read-only
Table 487. Cooling Device Count For Redundancy
Name
coolingDeviceCountForRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.6
Description
Defines the total number of cooling devices required for this cooling
unit to have redundancy.
Syntax
DellObjectRange
Access
Read-only
Table 488. Cooling Unit Name
Name
coolingUnitName
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.7
Description
Defines the cooling unit name in this chassis.
Syntax
DellString
Access
Read-only
Table 489. Cooling Unit Status
Name
coolingUnitStatus
Object ID
1.3.6.1.4.1.674.10892.1.700.10.1.8
Description
Defines the status of the cooling unit in this chassis.
Syntax
DellStatus
Access
Read-only
138
Cooling Device Table
Table 490. Cooling Device Table
Name
coolingDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.700.12
Description
Defines the Cooling Device Table.
Syntax
CoolingDeviceTableEntry
Access
Not accessible
Table 491. Cooling Device Table Entry
Name
coolingDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1
Description
Defines the Cooling Device Table entry.
Syntax
CoolingDeviceTableEntry
Access
Not accessible
Index
cooling DevicechassisIndex
,
coolingDeviceIndex
Table 492. Cooling Device Chassis Index
Name
coolingDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 493. Cooling Device Index
Name
coolingDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.2
Description
Defines the index of cooling devices in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 494. Cooling Device State Capabilities
Name
coolingDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.3
Description
Defines the capabilities of the cooling device.
Syntax
DellStateCapabilities
139
Access
Read-only
Table 495. Cooling Device State Settings
Name
coolingDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.4
Description
Defines the state and settings of the cooling device.
Syntax
DellStateSettings
Access
Read-only
Table 496. Cooling Device Status
Name
coolingDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.5
Description
Defines the status of the cooling device.
Syntax
DellStatusProbe
Access
Read-only
Table 497. Cooling Device Reading
Name
coolingDeviceReading
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.6
Description
Defines either the cooling device’s speed in revolutions per minute
(RPM), or the off/on value of the fan.
When the value for coolingDeviceSubType is other than
coolingDeviceSubTypeIsDiscrete, the value returned for this attribute is
the speed in RPM or the OFF/ON value of the cooling device. When the
value for coolingDeviceSubType is coolingDeviceSubTypeIsDiscrete, a
value is not returned for this attribute.
Syntax
DellSigned32BitRange
Access
Read-only
Table 498. Cooling Device Type
Name
coolingDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.7
Description
Defines the cooling device type.
Syntax
DellCoolingDeviceType (Cooling Device Type)
Access
Read-only
Table 499. Cooling Device Location Name
Name
coolingDeviceLocationName
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.8
Description
Defines the location of the cooling device in this chassis.
Syntax
DellString
140
Access
Read-only
Table 500. Cooling Device Upper Nonrecoverable Threshold
Name
coolingDeviceUppernonrecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.9
Description
Defines the value of the fan’s upper nonrecoverable threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 501. Cooling Device Upper Critical Threshold
Name
coolingDeviceUpperCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.10
Description
Defines the value of the fan’s upper critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 502. Cooling Device Upper Noncritical Threshold
Name
coolingDeviceUpperNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.11
Description
Defines the user-assigned value of the fan’s upper noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 503. Cooling Device Lower Noncritical Threshold
Name
coolingDeviceLowerNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.12
Description
Defines the user-assigned value of the fan’s lower noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 504. Cooling Device Lower Critical Threshold
Name
coolingDeviceLowerCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.13
Description
Defines the value of the fan’s lower critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
141
Table 505. Cooling Device Lower Nonrecoverable Threshold
Name
coolingDeviceLowerNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.14
Description
Defines the value of the fan’s lower nonrecoverable threshold.
Syntax
DellSigned32BRead-onlyitRange
Access
Read-only
Table 506. Cooling Device Cooling Unit Index Reference
Name
coolingDevicecoolingUnitIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.15
Description
Defines the index for the associated system cooling unit in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 507. Cooling Device Subtype
Name
coolingDeviceSubType
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.16
Description
Defines the cooling device subtype.
Syntax
DellCoolingDeviceSubType (Cooling Device Subtype)
Access
Read-only
Table 508. Cooling Device Probe Capabilities
Name
coolingDeviceProbeCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.17
Description
Defines the probe capabilities of the cooling device.
Syntax
DellProbeCapabilities
Access
Read-only
Table 509. Cooling Device Discrete Reading
Name
coolingDeviceDiscreteReading
Object ID
1.3.6.1.4.1.674.10892.1.700.12.1.18
Description
Defines the reading for a voltage probe of type
coolingDeviceSubTypeIsDiscrete.
When the value for coolingDeviceSubType is other than
coolingDeviceSubTypeIsDiscrete, a value is not returned for this
attribute. When the value for coolingDeviceSubType is
coolingDeviceSubTypeIsDiscrete, the value returned for this attribute is
the discrete reading for the cooling device.
Syntax
DellCoolingDeviceDiscreteReading (Cooling Device Discrete Reading)
Access
Read-only
142
Temperature Probe Table
Table 510. Temperature Probe Table
Name
temperatureProbeTable
Object ID
1.3.6.1.4.1.674.10892.1.700.20
Description
Defines the Temperature Probe Table.
Syntax
TemperatureProbeTableEntry
Access
Not accessible
Table 511. Temperature Probe Table Entry
Name
temperatureProbeTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1
Description
Defines the Temperature Probe Table entry.
Syntax
TemperatureProbeTableEntry
Access
Not accessible
Index
temperatureProbechassisIndex
,
temperatureProbeIndex
Table 512. Temperature Probe Chassis Index
Name
temperatureProbechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 513. Temperature Probe Index
Name
temperatureProbeIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.2
Description
Defines the index of temperature probes in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 514. Temperature Probe State Capabilities
Name
temperatureProbeStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.3
Description
Defines the capabilities of the temperature probe.
Syntax
DellStateCapabilities
143
Access
Read-only
Table 515. Temperature Probe State Settings
Name
temperatureProbeStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.4
Description
Defines the state and settings of the temperature probe.
Syntax
DellStateSettings
Access
Read-only
Table 516. Temperature Probe Status
Name
temperatureProbeStatus
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.5
Description
Defines the status of the temperature probe in tenths of degrees
Celsius.
Syntax
DellStatusProbe
Access
Read-only
Table 517. Temperature Probe Reading
Name
temperatureProbeReading
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.6
Description
Defines the value of the temperature probe.
When the value for temperatureProbeType is other than
temperatureProbeTypeIsDiscrete, the value returned for this attribute is
the temperature that the probe is reading in tenths of degrees
Centigrade. When the value for temperatureProbeType is
temperatureProbeTypeIsDiscrete, a value is not returned for this
attribute.
Syntax
DellSigned32BitRange
Access
Read-only
Table 518. Temperature Probe Type
Name
temperatureProbeType
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.7
Description
Defines the temperature probe type.
Syntax
DellTemperatureProbeType (Temperature Probe Type)
Access
Read-only
Table 519. Temperature Probe Location Name
Name
temperatureProbeLocationName
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.8
Description
Defines the location of the temperature probe in this chassis.
144
Syntax
DellString
Access
Read-only
Table 520. Temperature Probe Upper Nonrecoverable Threshold
Name
temperatureProbeUpperNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.9
Description
Defines the value of the temperature probe’s upper nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 521. Temperature Probe Upper Critical Threshold
Name
temperatureProbeUpperCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.10
Description
Defines the value of the temperature probe’s upper critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 522. Temperature Probe Upper Noncritical Threshold
Name
temperatureProbeUpperNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.11
Description
Defines the user-assigned value of the temperature probe’s upper
noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 523. Temperature Probe Lower Noncritical Threshold
Name
temperatureProbeLowerNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.12
Description
Defines the user-assigned value of the temperature probe’s lower
noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 524. Temperature Probe Lower Critical Threshold
Name
temperatureProbeLowerCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.13
Description
Defines the value of the temperature probe’s lower critical threshold.
Syntax
DellSigned32BitRange
145
Access
Read-only
Table 525. Temperature Probe Lower Nonrecoverable Threshold
Name
temperatureProbeLowerNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.14
Description
Defines the value of the temperature probe’s lower nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 526. Temperature Probe Probe Capabilities
Name
temperatureProbeProbeCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.15
Description
Defines the probe capabilities of the temperature probe.
Syntax
DellProbeCapabilities
Access
Read-only
Table 527. Temperature Probe Discrete Reading
Name
temperatureProbeDiscreteReading
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.16
Description
Defines the reading for a temperature probe of type
temperatureProbeTypeIsDiscrete.
When the value for temperatureProbeType is other than
temperatureProbeTypeIsDiscrete, a value is not returned for this
attribute. When the value for temperatureProbeType is
temperatureProbeTypeIsDiscrete, the value returned for this attribute is
the discrete reading for the probe.
Syntax
DellTemperatureDiscreteReading (Temperature Probe Discrete Reading)
Access
Read-only
Thermal Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 528. Cooling Device Type
Variable Name: DellCoolingDeviceType
Data Type: Integer
Possible Data Values
Meaning of Data Value
coolingDeviceTypeIsOther(1)
The cooling device type is not one of the
following:
coolingDeviceTypeIsUnknown(2)
The cooling device type is unknown (not known or
not monitored).
coolingDeviceTypeIsAFan(3)
The cooling device type is a fan.
146
coolingDeviceTypeIsABlower(4)
The cooling device type is a centrifugal blower.
coolingDeviceTypeIsAChipFan(5)
The cooling device type is a fan on an integrated
circuit.
coolingDeviceTypeIsACabinetFan(6)
The cooling device type is a cabinet fan.
coolingDeviceTypeIsAPowerSupplyFan(7)
The cooling device type is a power supply fan.
coolingDeviceTypeIsAHeatPipe(8)
The cooling device type is a heat pipe.
coolingDeviceTypeIsRefrigeration(9)
The cooling device type is an integrated
refrigeration unit.
coolingDeviceTypeIsActiveCooling(10)
The cooling device type is an active cooling device.
coolingDeviceTypeIsPassiveCooling(11)
The cooling device type is a passive cooling device.
Table 529. Cooling Device Subtype
Variable Name: DellCoolingDeviceSubType
Data Type: Integer
Possible Data Values
Meaning of Data Value
coolingDeviceSubTypeIsOther(1)
The cooling device subtype is not one of the
following:
coolingDeviceSubTypeIsUnknown(2)
The cooling device subtype is unknown (not
known or not monitored).
coolingDeviceSubTypeIsAFanThatReads
InRPM(3)
The cooling device subtype is a fan that reads in
RPMs.
coolingDeviceSubTypeIsAFanReadsONor
OFF(4)
The cooling device subtype is a fan that reads 0
(off) or 1 (on).
coolingDeviceSubTypeIsAPowerSupply
FanThatReadsinRPM(5)
The cooling device subtype is a power supply fan
that reads in RPMs.
coolingDeviceSubTypeIsAPowerSupply
FanThatReads- ONorOFF(6)
The cooling device subtype is a power supply fan
that reads 0 (off) or 1 (on).
coolingDeviceSubTypeIsDiscrete(16)
The cooling device subtype is a cooling device
with discrete reading.
Table 530. Cooling Device Discrete Reading
Variable Name: DellCoolingDeviceDiscreteReading .
Data Type: Integer
Possible Data Values
Meaning of Data Value
coolingDeviceIsGood(1)
The cooling device discrete reading is good.
coolingDeviceIsBad(2)
The cooling device discrete reading is bad
Table 531. Temperature Probe Type
Variable Name: DellTemperatureProbeType
Data Type: Integer
147
Possible Data Values
Meaning of Data Value
temperatureProbeTypeIsOther(1)
The temperature probe subtype is not one of the
following:
temperatureProbeTypeIsUnknown(2)
The temperature probe subtype is unknown (not
known or not monitored).
temperatureProbeTypeIsAmbientESM(3)
The temperature probe is for ambient Embedded
Systems Management (ESM).
temperatureProbeTypeIsDiscrete(16)
The temperature probe subtype is a temperature
probe with discrete reading.
Table 532. Temperature Probe Discrete Reading
Variable Name: DellTemperatureDiscreteReading
Data Type: Integer
Possible Data Values
Meaning of Data Value
temperatureIsGood(1)
The temperature probe discrete reading is good.
temperatureIsBad(2)
The temperature probe discrete reading is bad.
Remote Flash BIOS Group
The Remote Flash Basic Input/Output System (BIOS) Table defines the variables used to remotely update
the BIOS in a system. The variables also define the capabilities of BIOS updates on the system.
Remote Flash BIOS Group Table
The Remote Flash BIOS Group defines objects in the Remote Flash BIOS MIB table.
Remote Flash BIOS Table
The following object sets up the Remote Flash BIOS Table:
Table 533. Remote Flash BIOS Table
Name
remoteFlashBIOSTable
Object ID
1.3.6.1.4.1.674.10892.1.900.10
Description
Defines the Remote Flash BIOS Table.
Syntax
RemoteFlashBIOSTableEntry
Access
Not accessible
Table 534. Remote Flash BIOS Table Entry
Name
remoteFlashBIOSTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1
Description
Defines the Remote Flash BIOS Table entry.
Syntax
RemoteFlashBIOSTableEntry
148
Access
Not accessible
Index
remoteFlashBIOSchassisIndex, remoteFlashBIOSIndex
Table 535. Remote Flash BIOS Chassis Index
Name
remoteFlashBIOSchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 536. Remote Flash BIOS Index
Name
remoteFlashBIOSIndex
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.2
Description
Defines the index to the remote BIOS update hardware on this system.
Syntax
DellObjectRange
Access
Read-only
Table 537. Remote Flash BIOS State Capabilities Unique
Name
remoteFlashBIOSStateCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.3
Description
Defines the capabilities of the remote BIOS update hardware on this
system.
Syntax
DellRemoteFlashBIOSStateCapabilitiesUnique (Remote Flash BIOS State
Capabilities Unique)
Access
Read-only
Table 538. Remote Flash BIOS State Settings Unique
Name
remoteFlashBIOSStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.4
Description
Defines the state and settings of the remote BIOS update hardware on
this system.
Syntax
DellRemoteFlashBIOSStateSettingsUnique (Remote Flash BIOS State
Settings)
Access
Read-only
149
Table 539. Remote Flash BIOS Status
Name
remoteFlashBIOSStatus
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.5
Description
Defines the status of the remote BIOS update hardware on this system.
Syntax
DellRemoteFlashBIOSStateStatus
Access
Read-only
Table 540. Remote Flash BIOS Last BIOS Date Name
Name
remoteFlashBIOSLastBIOSDateName
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.6
Description
Defines the date of the last BIOS update.
Syntax
DellDateName
Access
Read-only
Table 541. Remote Flash BIOS Completion Code
Name
remoteFlashBIOSCompletionCode
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.7
Description
Defines the completion code of the last BIOS update.
Syntax
DellRemoteFlashBIOSCompletionCode (Remote Flash BIOS Completion
Code)
Access
Read-only
Table 542. Remote Flash BIOS Minimum Contiguous Memory
Name
remoteFlashBIOSMinimumContiguousMemory
Object ID
1.3.6.1.4.1.674.10892.1.900.10.1.8
Description
Defines the minimum size of contiguous memory required for remote
BIOS update in kilobytes.
Syntax
DellUnsigned32BitRange
Access
Read-only
Remote Flash BIOS Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 543. Remote Flash BIOS State Capabilities Unique
Variable Name: DellRemoteFlashBIOSStateCapabilitiesUnique
Data Type: Integer
Possible Data Values
150
Meaning of Data Value
unknown(1)
The remote flash BIOS’s capabilities are unknown.
enableCapable(2)
The remote flash BIOS can be disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The remote flash BIOS can be set to indicate not
ready.
cancelCapable(8)
Flash of BIOS can be canceled.
enableAndCancelCapable(10)
Flash of BIOS can be enabled or canceled.
Table 544. Remote Flash BIOS State Settings
Variable Name: DellRemoteFlashBIOSStateSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
The remote flash BIOS’s capabilities are unknown.
enabled(2)
The remote flash BIOS update is disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReady(4)
The remote flash BIOS’s state is not ready.
canceled(8)
The remote flash BIOS has been canceled.
pending(16)
The remote flash BIOS update is pending.
other(32)
The remote flash BIOS state/setting is not one of
the previous values.
Table 545. Remote Flash BIOS Completion Code
Variable Name: DellRemoteFlashBIOSCompletionCode
Data Type: Integer
Possible Data Values
Meaning of Data Value
completionCodeIsOther(1)
The completion code status is not one of the
following:
completionCodeIsUnknown(2)
The completion code is unknown (not known or
not monitored).
completionCodeIsOK(3)
This completion code completed successfully.
completionCodeIsBadImage(4)
This completion code is a bad flash BIOS image.
completionCodeIsNoFileAccess(5)
Flash BIOS could not be accessed.
completionCodeIsNotReady(6)
Flash BIOS memory not ready.
completionCodeIsDisabled(7)
Flash BIOS is currently disabled.
completionCodeIsNoBattery(8)
A battery must be installed.
completionCodeIsNoChargedBattery(9)
A fully charged battery must be installed.
151
completionCodeIsNoExternalPower(10)
An external power adapter must be connected.
completionCodeIsNo12VoltSet(11)
12 volts (V) could not be set.
completionCodeIsNo12VoltRemoval(12)
12 V could not be removed.
completionCodeIsFlashMemoryFailed (13)
A flash memory failure occurred.
completionCodeIsGeneralFailure(14)
A general failure occurred.
completionCodeIsDataMiscompare(15)
A data miscompare error occurred.
completionCodeIsNoImageFound(16)
The flash BIOS image could not be found in
memory.
completionCodeIsNoUpdatePerformed (17)
No update operation has been performed.
Port Group
The Port Group provides information about the different types of ports that may be present in your
system. This management information base (MIB) group also provides information about the capabilities,
states, and settings that are possible for each port.
Port Group Tables
The following MIB tables define objects in the Port Group:
•
Pointing Port Table
•
Keyboard Port Table
•
Processor Port Table
•
Memory Device Port Table
•
Monitor Port Table
•
Small Computer System Interface (SCSI) Port Table
•
Parallel Port Table
•
Serial Port Table
•
Universal Serial Bus (USB) Port Table
Pointing Port Table
Table 546. Pointing Port Table
Name
pointingPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.10
Description
Defines the Pointing Port Table.
Syntax
IntegerPointingPortTableEntry
Access
Not accessible
Table 547. Pointing Port Table Entry
Name
pointingPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.1
152
Description
Defines the Pointing Port Table entry.
Syntax
PointingPortTableEntry
Access
Not accessible
Index
pointingPortchassisIndex
,
pointingPortIndex
Table 548. Pointing Port Chassis Index
Name
pointingPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 549. Pointing Port Index
Name
pointingPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.1.2
Description
Defines the index of the pointing ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 550. Pointing Port State Capabilities
Name
pointingPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.3
Description
Defines the capabilities of the pointing port.
Syntax
DellStateCapabilities
Access
Read-only
Table 551. Pointing Port State Settings
Name
pointingPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.4
Description
Defines the state and settings of the pointing port.
Syntax
DellStateSettings
Access
Read-only
153
Table 552. Pointing Port Status
Name
pointingPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.5
Description
Defines the status of the pointing port.
Syntax
DellStatus
Access
Read-only
Table 553. Pointing Port Security State
Name
pointingPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.6
Description
Defines the security settings of the pointing port.
Syntax
DellPortSecurityState
Access
Read-only
Table 554. Pointing Port Connector Type
Name
pointingPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.7
Description
Defines the connector type of the pointing port.
Syntax
DellPointingPortConnectorType (See Pointing Port Connector Type)
Access
Read-only
Table 555. Pointing Port Name
Name
pointingPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.8
Description
Defines the name of the pointing port.
Syntax
DellString
Access
Read-only
Table 556. Pointing Port BIOS Connector Type
Name
pointingPortBIOSConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.10.9
Description
Defines the basic input/output system (BIOS) connector type of the
pointing port.
Syntax
DellGenericPortConnectorType
Access
Read-only
154
Keyboard Port Table
Table 557. Keyboard Port Table
Name
keyboardPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.20
Description
Defines the Keyboard Port Table.
Syntax
IntegerKeyboardPortTableEntry
Access
Not accessible
Table 558. Keyboard Port Table Entry
Name
keyboardPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1
Description
Defines the Keyboard Port Table entry.
Syntax
KeyboardPortTableEntry
Access
Not accessible
Index
keyboardPortchassisIndex
,
keyboardPortIndex
Table 559. Keyboard Port Chassis Index
Name
keyboardPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 560. Keyboard Port Index
Name
keyboardPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.2
Description
Defines the index of the keyboard ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 561. Keyboard Port State Capabilities
Name
keyboardPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.3
155
Description
Defines the capabilities of the keyboard port.
Syntax
DellStateCapabilities
Access
Read-only
Table 562. Keyboard Port State Settings
Name
keyboardPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.4
Description
Defines the state and settings of the keyboard port.
Syntax
DellStateSettings
Access
Read-only
Table 563. Keyboard Port Status
Name
keyboardPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.5
Description
Defines the status of the keyboard port.
Syntax
DellStatus
Access
Read-only
Table 564. Keyboard Port Security State
Name
keyboardPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.6
Description
Defines the security settings of the keyboard port.
Syntax
DellPortSecurityState
Access
Read-only
Table 565. Keyboard Port Connector Type
Name
keyboardPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.7
Description
Defines the connector type of the keyboard port.
Syntax
DellKeyboardPortConnectorType (See Keyboard Port Connector Types)
Access
Read-only
Table 566. Keyboard Port Name
Name
keyboardPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.8
Description
Defines the name of the keyboard port.
156
Syntax
DellString
Access
Read-only
Table 567. Keyboard Port BIOS Connector Type
Name
keyboardPortBIOSConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.20.1.9
Description
Defines the BIOS connector type of the keyboard port.
Syntax
DellGenericPortConnectorType
Access
Read-only
Processor Port Table
Table 568. Processor Port Table
Name
processorPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.30
Description
Defines the Processor Port Table.
Syntax
IntegerProcessorPortTableEntry
Access
Not accessible
Table 569. Processor Port Table Entry
Name
processorPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1
Description
Defines the Processor Port Table entry.
Syntax
ProcessorPortTableEntry
Access
Not accessible
Index
processorPortchassisIndex
,
processorPortIndex
Table 570. Processor Port Chassis Index
Name
processorPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
157
Table 571. Processor Port Index
Name
processorPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.2
Description
Defines the index of the processor ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 572. Processor Port State Capabilities
Name
processorPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.3
Description
Defines the capabilities of the processor port.
Syntax
DellStateCapabilities
Access
Read-only
Table 573. Processor Port State Settings
Name
processorPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.4
Description
Defines the state and settings of the processor port.
Syntax
DellStateSettings
Access
Read-only
Table 574. Processor Port Status
Name
processorPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.5
Description
Defines the status of the processor port.
Syntax
DellStatus
Access
Read-only
Table 575. Processor Port Security State
Name
processorPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.6
Description
Defines the security settings of the processor port.
Syntax
DellPortSecurityState
Access
Read-only
158
Table 576. Processor Port Connector Type
Name
processorPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.7
Description
Defines the connector type of the processor port.
Syntax
DellProcessorPortConnectorType (See Processor Port Connector
Types)
Access
Read-only
Table 577. Processor Port Name
Name
processorPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.8
Description
Defines name of the processor port.
Syntax
DellString
Access
Read-only
Table 578. Processor Port BIOS Connector Type
Name
processorPortBIOSConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.30.1.9
Description
Defines the BIOS connector type of the processor port.
Syntax
DellGenericPortConnectorType
Access
Read-only
Memory Device Port Table
Table 579. Memory Device Port Table
Name
memoryDevicePortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.40
Description
Defines the Memory Device Port Table.
Syntax
IntegerMemoryDevicePortTableEntry
Access
Not accessible
Table 580. Memory Device Port Table Entry
Name
memoryDevicePortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1
Description
Defines the Memory Device Port Table entry.
Syntax
MemoryDevicePortTableEntry
Access
Not accessible
159
Index
memoryDevicePortchassisIndex
,
memoryDevicePortIndex
Table 581. Memory Device Port Chassis Index
Name
memoryDevicePortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 582. Memory Device Port Index
Name
memoryDevicePortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.2
Description
Defines the index of the memory device port in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 583. Memory Device Port State Capabilities
Name
memoryDevicePortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.3
Description
Defines the capabilities of the memory device port.
Syntax
DellStateCapabilities
Access
Read-only
Table 584. Memory Device Port State Settings
Name
memoryDevicePortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.4
Description
Defines the state and settings of the memory device port.
Syntax
DellStateSettings
Access
Read-only
Table 585. Memory Device Port Status
Name
memoryDevicePortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.5
Description
Defines the status of the memory device port.
160
Syntax
DellStatus
Access
Read-only
Table 586. Memory Device Port Security State
Name
memoryDevicePortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.6
Description
Defines the security settings of the memory device port.
Syntax
DellPortSecurityState
Access
Read-only
Table 587. Memory Device Port Connector Type
Name
memoryDevicePortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.7
Description
Defines the connector type of the memory device port.
Syntax
DellMemoryDevicePortConnectorType (See Memory Device Port
Connector Types)
Access
Read-only
Table 588. Memory Device Port Name
Name
memoryDevicePortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.8
Description
Defines the name of the memory device port.
Syntax
DellString
Access
Read-only
Table 589. Memory Device Port BIOS Connector Type
Name
memoryDevicePortBIOSConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.9
Description
Defines the BIOS connector type of the memory device port.
Syntax
DellGenericPortConnectorType
Access
Read-only
Table 590. Memory Device Port Physical Memory Array Index Reference
Name
memoryDevicePortPhysicalMemoryArrayIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.10
Description
Defines the index to the associated physical memory array.
161
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 591. Memory Device Port Physical Memory Card Index Reference
Name
memoryDevicePortPhysicalMemoryCardIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1000.40.1.11
Description
Defines the index (one-based) of the Physical Memory Card Table entry
for the physical memory card with the same chassis index that this
memory device port is associated with (if any).
Syntax
DellUnsigned32BitRange
Access
Read-only
Monitor Port Table
Table 592. Monitor Port Table
Name
monitorPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.50
Description
Defines the Monitor Port Table.
Syntax
IntegerMonitorPortTableEntry
Access
Not accessible
Table 593. Monitor Port Table Entry
Name
monitorPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1
Description
Defines the Monitor Port Table entry.
Syntax
MonitorPortTableEntry
Access
Not accessible
Index
monitorPortchassisIndex
,
monitorPortIndex
Table 594. Monitor Port Chassis Index
Name
monitorPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.1
Description
Defines the index (one-based) of this chassis
Syntax
DellObjectRange
Access
Read-only
162
Table 595. Monitor Port Index
Name
monitorPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.2
Description
Defines the index of the monitor ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 596. Monitor Port State Capabilities
Name
monitorPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.3
Description
Defines the capabilities of the monitor port.
Syntax
DellStateCapabilities
Access
Read-only
Table 597. Monitor Port State Settings
Name
monitorPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.4
Description
Defines the state of the monitor port.
Syntax
DellStateSettings
Access
Read-only
Table 598. Monitor Port Status
Name
monitorPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.5
Description
Defines the status of the monitor port.
Syntax
DellStatus
Access
Read-only
Table 599. Monitor Port Security State
Name
monitorPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.6
Description
Defines the security settings of the monitor port.
Syntax
DellPortSecurityState
Access
Read-only
163
Table 600. Monitor Port Connector Type
Name
monitorPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.7
Description
Defines the connector type of the monitor port.
Syntax
DellMonitorPortConnectorTypes (See Monitor Port Connector Types)
Access
Read-only
Table 601. Monitor Port Name
Name
monitorPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.8
Description
Defines the name of the monitor port.
Syntax
DellString
Access
Read-only
Table 602. Monitor Port BIOS Connector Type
Name
monitorPortBIOSConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.50.1.9
Description
Defines the name of the BIOS connector type of the monitor port.
Syntax
DellGenericPortConnectorType
Access
Read-only
Small Computer System Interface (SCSI) Port Table
Table 603. Small Computer System Interface (SCSI) Port Table
Name
sCSIPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.60
Description
Defines the SCSI Port Table.
Syntax
IntegerSCSIPortTableEntry
Access
Not accessible
Table 604. SCSI Port Table Entry
Name
sCSIPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1
Description
Defines the SCSI Port Table entry.
Syntax
SCSIPortTableEntry
Access
Not accessible
Index
sCSIPortchassisIndex
164
,
sCSIPortIndex
Table 605. SCSI Port Chassis Index
Name
sCSIPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.1
Description
Defines the index (one-based) of this chassis
Syntax
DellObjectRange
Access
Read-only
Table 606. SCSI Port Index
Name
sCSIPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.2
Description
Defines the index of the SCSI ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 607. SCSI Port State Capabilities
Name
sCSIPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.3
Description
Defines the capabilities of the SCSI port.
Syntax
DellStateCapabilities
Access
Read-only
Table 608. SCSI Port State Settings
Name
DellStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.4
Description
Defines the state and settings of the SCSI port.
Syntax
DellStatus
Access
Read-only
Table 609. SCSI Port Status
Name
sCSIPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.5
Description
Defines the status of the SCSI port.
Syntax
DellStatus
165
Access
Read-only
Table 610. SCSI Port Security State
Name
sCSIPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.6
Description
Defines the security settings of the SCSI port.
Syntax
DellPortSecurityState
Access
Read-only
Table 611. SCSI Port Connector Type
Name
sCSIPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.7
Description
Defines the connector type of the SCSI port.
Syntax
DellSCSIPortConnectorType (See SCSI Port Connector Types)
Access
Read-only
Table 612. SCSI Port Name
Name
sCSIPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.8
Description
Defines the name of the SCSI port.
Syntax
DellString
Access
Read-only
Table 613. SCSI Port BIOS Connector Type
Name
sCSIPortBIOSConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.60.1.9
Description
Defines the BIOS connector type of the SCSI port.
Syntax
DellGenericPortConnectorType
Access
Read-only
Parallel Port Table
Table 614. Parallel Port Table
Name
parallelPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.70
Description
Defines the Parallel Port Table.
Syntax
IntegerParallelPortTableEntry
166
Access
Not accessible
Table 615. Parallel Port Table Entry
Name
parallelPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1
Description
Defines the Parallel Port Table entry.
Syntax
ParallelPortTableEntry
Access
Not accessible
Index
parallelPortchassisIndex
,
parallelPortIndex
Table 616. Parallel Port Chassis Index
Name
parallelPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 617. Parallel Port Index
Name
parallelPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.2
Description
Defines the index of the parallel ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 618. Parallel Port State Capabilities
Name
parallelPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.3
Description
Defines the capabilities of the parallel port.
Syntax
DellStateSettings
Access
Read-only
Table 619. Parallel Port State Settings
Name
parallelPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.4
167
Description
Defines the state and settings of the parallel port.
Syntax
DellStateSettings
Access
Read-only
Table 620. Parallel Port Status
Name
parallelPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.5
Description
Defines the status of the parallel port.
Syntax
DellStatus
Access
Read-only
Table 621. Parallel Port Security State
Name
DellPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.6
Description
Defines the security state of the parallel port.
Syntax
DellStatus
Access
Read-only
Table 622. Parallel Port Connector Type
Name
parallelPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.7
Description
Defines the connector type of the parallel port.
Syntax
DellParallelPortConnectorType
Access
Read-only
Table 623. Parallel Port Name
Name
parallelPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.8
Description
Defines the name of the parallel port.
Syntax
DellString
Access
Read-only
Table 624. Parallel Port Connector Pin Out
Name
parallelPortConnectorPinOut
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.9
Description
Defines the pinout of the parallel port.
168
Syntax
DellParallelPortConnectorPinout
Access
Read-only
Table 625. Parallel Port Capabilities Unique
Name
parallelPortCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.10
Description
Defines the capabilities of the parallel port.
Syntax
DellParallelPortConnectorPinout
Access
Read-only
Table 626. Parallel Port Base I/O Address
Name
parallelPortBaseIOAddress
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.11
Description
Defines the Base Input/Output (I/O) address of the parallel port.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 627. Parallel Port IRQ Level
Name
parallelPortIRQLevel
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.12
Description
Defines the Interrupt Request Level (IRQ) of the parallel port.
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 628. Parallel Port DMA Support
Name
parallelPortDMASupport
Object ID
1.3.6.1.4.1.674.10892.1.1000.70.1.13
Description
Defines if direct memory access (DMA) is supported by the parallel port.
Syntax
DellBoolean
Access
Read-only
Serial Port Table
Table 629. Serial Port
Name
serialPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.80
Description
Defines the Serial Port Table.
169
Syntax
IntegerSerialPortTableEntry
Access
Not accessible
Table 630. Serial Port Table Entry
Name
serialPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1
Description
Defines the Serial Port Table entry.
Syntax
SerialPortTableEntry
Access
Not accessible
Index
serialPortchassisIndex
,
serialPortIndex
Table 631. Serial Port Chassis Index
Name
serialPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 632. Serial Port Index
Name
serialPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.2
Description
Defines the index of the serial ports in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 633. Serial Port State Capabilities
Name
serialPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.3
Description
Defines the capabilities of the serial port.
Syntax
DellStateCapabilities
Access
Read-only
170
Table 634. Serial Port State Settings
Name
serialPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.4
Description
Defines the state and settings of the serial port.
Syntax
DellStateSettings
Access
Read-only
Table 635. Serial Port Status
Name
serialPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.5
Description
Defines the status of the serial port.
Syntax
DellStatus
Access
Read-only
Table 636. Serial Port Security State
Name
serialPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.6
Description
Defines the security settings of the serial port.
Syntax
DellPortSecurityState
Access
Read-only
Table 637. Serial Port Connector Type
Name
serialPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.7
Description
Defines connector type of the serial port.
Syntax
DellSerialPortConnectorType
Access
Read-only
Table 638. Serial Port Name
Name
serialPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.8
Description
Defines the name of the serial port.
Syntax
DellString
Access
Read-only
171
Table 639. Serial Port Maximum Speed
Name
serialPortMaximumSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.9
Description
Defines the maximum speed the serial interface can support in bits per
second (bps).
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 640. Serial Port Capabilities Unique
Name
serialPortCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.10
Description
Defines additional capabilities of the serial port.
Syntax
DellSerialPortCapabilitiesUnique
Access
Read-only
Table 641. Serial Port Base I/O Address
Name
serialPortBaseIOAddress
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.11
Description
Defines the base I/O address of the serial port.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 642. Serial Port IRQ Level
Name
serialPortIRQLevel
Object ID
1.3.6.1.4.1.674.10892.1.1000.80.1.12
Description
Defines the IRQ of the serial port.
Syntax
DellUnsigned8BitRange
Access
Read-only
Universal Serial Bus (USB) Port Table
Table 643. Universal Serial Bus (USB) Port
Name
uSBPortTable
Object ID
1.3.6.1.4.1.674.10892.1.1000.90
Description
Defines the USB Port Table.
Syntax
IntegerUSBPortTableEntry
172
Access
Not accessible
Table 644. USB Port Table Entry
Name
uSBPortTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1
Description
Defines the USB Port Table entry.
Syntax
USBPortTableEntry
Access
Not accessible
Index
uSBPortchassisIndex , uSBPortIndex
Table 645. USB Port Chassis Index
Name
uSBPortchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 646. USB Port Index
Name
uSBPortIndex
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.2
Description
Defines the index of the USB ports in this chassis
Syntax
DellObjectRange
Access
Read-only
Table 647. USB Port State Capabilities
Name
uSBPortStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.3
Description
Defines the capabilities of the USB port.
Syntax
DellStateCapabilities
Access
Read-only
Table 648. USB Port State Settings
Name
uSBPortStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.4
Description
Defines the state and settings of the USB port.
Syntax
DellStateSettings
173
Access
Read-only
Table 649. USB Port Status
Name
uSBPortStatus
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.5
Description
Defines the state of the USB port.
Syntax
DellStatus
Access
Read-only
Table 650. USB Port Security State
Name
uSBPortSecurityState
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.6
Description
Defines the security settings of the USB port.
Syntax
DellPortSecurityState
Access
Read-only
Table 651. USB Port Connector Type
Name
uSBPortConnectorType
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.7
Description
Defines the connector type of the USB port.
Syntax
DellUSBPortConnectorType
Access
Read-only
Table 652. USB Port Name
Name
uSBPortName
Object ID
1.3.6.1.4.1.674.10892.1.1000.90.1.8
Description
Defines the name of the USB port.
Syntax
DellString
Access
Read-only
Port Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 653. Pointing Port Connector Type
Variable Name: DellPointingPortConnectorType
Data Type :Integer
Possible Data Values
174
Meaning of Data Value
connectorPortTypeIsOther(
1)
The pointing port connector type
is not one of the following:
connectorPortTypeIsUnknow
n(2)
The pointing port connector type
is unknown.
connectorPortTypeIsSeria
l(3)
The pointing port connector type
is serial.
connectorPortTypeIsPS2(4)
The pointing port connector type
is a Personal System/2 (PS/2).
connectorPortTypeIsInfrar
ed(5)
The pointing port connector type
is infrared.
connectorPortTypeIsHPHIL(
6)
The pointing port connector type
is HP-HIL.
connectorPortTypeIsBusMou
se(7)
The pointing port connector type
is a bus mouse.
connectorPortTypeIsADB(8)
The pointing port connector type
is ADB.
connectorPortTypeIsDB9(9)
The pointing port connector type
is nine-pin DB-9.
connectorPortTypeIsMicroD
IN(10)
The pointing port connector type
is micro Deutsche Industrie
Norm (DIN).
connectorPortTypeIsAccess
BusUSB (11)
The pointing port connector type
is Access Bus USB.
connectorPortTypeIsPC98(1
2)
The port connector type is a
PC-98.
Table 654. Keyboard Port Connector Types
Variable Name : DellKeyboardPortConnectorType
Data Type: Integer
Possible Data Values
Meaning of Data Value
connectorPortTypeIsOther(1)
The keyboard port connector type is not one of
the following:
connectorPortTypeIsUnknown(2)
The keyboard port connector type is unknown.
connectorPortTypeIsMiniDIN(3)
The keyboard port connector type is a mini DIN.
connectorPortTypeIsMicroDIN(4)
The keyboard port connector type is a MicroDIN.
connectorPortTypeIsPS2(5)
The keyboard port connector type is PS/2.
connectorPortTypeIsInfrared(6)
The keyboard port connector type is infrared.
connectorPortTypeIsHPHIL(7)
The keyboard port connector type is HP-HIL.
connectorPortTypeIsDB9(8)
The keyboard port connector type is DB-9.
175
connectorPortTypeIsAccessBusUSB(9)
The keyboard port connector type is bus USB.
connectorPortTypeIsPC98(10)
The keyboard port connector type is PC-98.
Table 655. Processor Port Connector Types
Variable Name : DellProcessorPortConnectorType
Data Type: Integer
Possible Data Values
Meaning of Data Value
connectorPortTypeIsOther(1)
The processor port connector type is not one of
the following:
connectorPortTypeIsUnknown(2)
The processor port connector type is unknown.
connectorPortTypeIsDaughterdBoard(3)
The processor port connector type is a daughter
board.
connectorPortTypeIsZIFSocket(4)
The processor port connector type is a zero
insertion force (ZIF) socket.
connectorPortTypeIsAPiggyBackBoard(5)
The processor port connector type is a
replacement piggyback board.
connectorPortTypeIsNone(6)
There is no processor port connector; processor is
soldered in place.
connectorPortTypeIsLIFSocket(7)
The processor port connector type is a low
insertion force (LIF) socket.
connectorPortTypeIsSlot1(8)
The processor port connector type is a slot one.
connectorPortTypeIsSlot2(9)
The processor port connector type is a slot two.
connectorPortTypeIs370PinSocket(10)
The processor port connector type is a 370 pin
socket.
Table 656. Memory Device Port Connector Types
Variable Name : DellMemoryDevicePortConnectorType
Data Type: Integer
Possible Data Values
Meaning of Data Value
connectorPortTypeIsOther(1)
The memory device port connector type is not one
of the following:
connectorPortTypeIsUnknown(2)
The memory device port connector type is
unknown.
connectorPortTypeIsSIMM(3)
The memory device port connector type is a single
in-line memory module (SIMM).
connectorPortTypeIsSIP(4)
The memory device port connector type is a SIP.
connectorPortTypeIsAChip(5)
The memory device port connector type is a chip.
connectorPortTypeIsDIP(6)
The memory device port connector type is a dual
in-line package (DIP).
176
connectorPortTypeIsZIP(7)
The memory device port connector type is a ZIP.
connectorPortTypeIsAProprietaryCard(8)
The memory device port connector type is a
proprietary card.
connectorPortTypeIsDIMM(9)
The memory device port connector type is a dual
in-line memory module (DIMM).
connectorPortTypeIsTSOP(10)
The memory device port connector type is a TSOP.
connectorPortTypeIsARowOfChips(11)
The memory device port connector type is a row
of chips.
connectorPortTypeIsRIMM(12)
The memory device port connector type is a
Rambus Inline Memory Module (RIMM).
connectorPortTypeIsSODIMM(13)
The memory device port connector type is a small
outline, dual in-line memory module (SODIMM).
connectorPortTypeIsSRIMM(14)
The memory device port connector type is a
SRIMM.
Table 657. Monitor Port Connector Types
Variable Name : DellMonitorPortConnectorType
Data Type: Integer
Possible Data Values
Meaning of Data Value
connectorPortTypeIsOther(1)
The monitor port connector type is not one of the
following:
connectorPortTypeIsUnknown(2)
The monitor port connector type is unknown.
connectorPortTypeIsDB15PinMale(3)
The monitor port connector type is a male DB-15.
connectorPortTypeIsDB15PinFemale(4)
The monitor port connector type is a female
DB-15.
Table 658. SCSI Port Connector Types
Variable Name : DellSCSIPortConnectorType
Data Type: Integer
Possible Data Values
Meaning of Data Value
connectorPortTypeIsOther(1)
The SCSI port connector type is not one of the
following:
connectorPortTypeIsUnknown(2)
The SCSI port connector type is unknown.
connectorPortTypeIsDIN25pin(3)
The SCSI port connector type is a DIN 25-pin.
connectorPortTypeIsDIN50pin(4)
The SCSI port connector type is a DIN 50-pin.
connectorPortTypeIsDIN68pin(5)
The SCSI port connector type is a DIN 68-pin.
Device Group
The Device Group provides information about different types of pointing, keyboard, processor, cache,
memory, and peripheral component interconnect (PCI) devices. Variables in this group cover information
177
about type, settings, configuration, manufacturer, address or location, and if applicable, the speed of the
device.
Device Tables
The following management information base (MIB) tables define objects in the Device Group:
•
Pointing Device Table
•
Keyboard Device Table
•
Processor Device Table
•
Processor Device Status Table
•
Cache Device Table
•
Memory Device Table
•
Memory Device Mapped Address Table
•
Generic Device Table
•
PCI Device Table
•
PCI Device Configuration Space Table
•
Network Device Table
•
Managed System Services Device Table
•
SD Card Unit Table
•
SD Card Device Table
Pointing Device Table
Table 659. Pointing Device Table
Name
pointingDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.10
Description
Defines the Pointing Device Table. This group of objects references the
Pointing Port Index (Pointing Port Index).
Syntax
SEQUENCE OF PointingDeviceTableEntry
Access
Not accessible
Table 660. Pointing Device Table Entry
Name
pointingDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1
Description
Defines the Pointing Device Table entry.
Syntax
PointingDeviceTableEntry
Access
Not accessible
Index
pointingDevicechassisIndex
,
pointingDeviceIndex
178
Table 661. Pointing Device Chassis Index
Name
pointingDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 662. Pointing Device Index
Name
pointingDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.2
Description
Defines the index of the pointing device in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 663. Pointing Device State Capabilities
Name
pointingDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.3
Description
Defines the capabilities of the pointing device.
Syntax
DellStateCapabilities
Access
Read-only
Table 664. Pointing Device State Settings
Name
pointingDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.4
Description
Defines the state of the pointing device.
Syntax
DellStateSettings
Access
Read-only
Table 665. Pointing Device Status
Name
pointingDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.5
Description
Defines the status of the pointing device.
Syntax
DellStatus
Access
Read-only
Table 666. Pointing Port Index Reference
Name
pointingPortIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.6
179
Description
Defines the index to the pointing port in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 667. Pointing Device Type
Name
pointingDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.7
Description
Defines the type of the pointing device.
Syntax
DellPointingDeviceType (See Pointing Device Type)
Access
Read-only
Table 668. Pointing Device Number of Buttons
Name
pointingDeviceNumberofButtons
Object ID
1.3.6.1.4.1.674.10892.1.1100.10.1.8
Description
Defines the number of buttons on the pointing device.
Syntax
DellUnsigned8BitRange
Access
Read-only
Keyboard Device Table
Table 669. Keyboard Device Table
Name
keyboardDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.20
Description
Defines the Keyboard Device Table. This table references the Keyboard
Port Index (Keyboard Port Index).
Syntax
SEQUENCE OF KeyboardDeviceTableEntry
Access
Not accessible
Table 670. Keyboard Device Table Entry
Name
keyboardDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1
Description
Defines the Keyboard Device Table entry.
Syntax
KeyboardDeviceTableEntry
Access
Not accessible
Index
keyboardDevicechassisIndex
,
keyboardDeviceIndex
180
Table 671. Keyboard Device Chassis Index
Name
keyboardDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 672. Keyboard Device Index
Name
keyboardDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.2
Description
Defines the index of the keyboard device for this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 673. Keyboard Device State Capabilities
Name
keyboardDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.3
Description
Defines the capabilities of the keyboard device.
Syntax
DellStateCapabilities
Access
Read-only
Table 674. Keyboard Device State Settings
Name
keyboardDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.4
Description
Defines the state of the keyboard device.
Syntax
DellStatesSettings
Access
Read-only
Table 675. Keyboard Device Status
Name
keyboardDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.5
Description
Defines the status of the keyboard device.
Syntax
DellStatus
Access
Read-only
Table 676. Keyboard Port Index Reference
Name
keyboardPortIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.6
181
Description
Defines the index to the associated the keyboard port in this chassis.
Syntax
DellStatus
Access
Read-only
Table 677. Keyboard Device Type Name
Name
keyboardDeviceTypeName
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.7
Description
Defines the name of the keyboard type.
Syntax
DellString
Access
Read-only
Table 678. Keyboard Device Layout Name
Name
keyboardDeviceLayoutName
Object ID
1.3.6.1.4.1.674.10892.1.1100.20.1.8
Description
Defines the name of the keyboard layout.
Syntax
DellString
Access
Read-only
Processor Device Table
Table 679. Processor Device Table
Name
processorDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.30
Description
Defines the Processor Device Table.
Syntax
SEQUENCE OF ProcessorDeviceTableEntry
Access
Not accessible
Table 680. Processor Device Table Entry
Name
processorDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1
Description
Defines the Processor Device Table entry.
Syntax
ProcessorDeviceTableEntry
Access
Not accessible
Index
processorDevicechassisIndex
,
processorDeviceIndex
Table 681. Processor Device Chassis Index
Name
processorDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.1
182
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 682. Processor Device Index
Name
processorDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.2
Description
Defines the index of the processor device in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 683. Processor Device State Capabilities
Name
processorDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.3
Description
Defines the capabilities of the processor device.
Syntax
DellStateCapabilities
Access
Read-only
Table 684. Processor Device State Settings
Name
processorDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.4
Description
Defines the state of the processor device.
Syntax
DellStateSettings
Access
Read-only
Table 685. Processor Device Status
Name
processorDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.5
Description
Defines the status of the processor device.
Syntax
DellStatus
Access
Read-only
Table 686. Processor Port Index Reference
Name
processorPortIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.6
Description
Defines the index to the associated processor port in this chassis.
Syntax
DellObjectRange
Access
Read-only
183
Table 687. Processor Device Type
Name
processorDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.7
Description
Defines the type of processor device.
Syntax
DellProcessorDeviceType (See Processor Device Type)
Access
Read-only
Table 688. Processor Device Manufacturer Name
Name
processorDeviceManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.8
Description
Defines the name of manufacturer of the processor device.
Syntax
DellString
Access
Read-only
Table 689. Processor Device Status State
Name
processorDeviceStatusState
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.9
Description
Defines the status state of the processor device.
Syntax
DellProcessorDeviceStatusState (See Processor Device Status State)
Access
Read-only
Table 690. Processor Device Family
Name
processorDeviceFamily
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.10
Description
Defines the family of the processor device.
Syntax
DellProcessorDeviceFamily (See Processor Device Family)
Access
Read-only
Table 691. Processor Device Maximum Speed
Name
processorDeviceMaximumSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.11
Description
Defines the maximum speed of the processor device in megahertz
(MHz). A zero (0) indicates that the speed is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 692. Processor Device Current Speed
Name
processorDeviceCurrentSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.12
184
Description
Defines the current speed of the processor device in MHz. A zero (0)
indicates that the speed is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 693. Processor Device External Clock Speed
Name
processorDeviceExternalClockSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.13
Description
Defines the speed of the external clock (the front-side bus speed) for
the processor device in MHz. A zero (0) indicates that the speed is
unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 694. Processor Device Voltage
Name
processorDeviceVoltage
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.14
Description
Defines the voltage powering the processor device in millivolts. A zero
(0) indicates the speed is unknown.
Syntax
DellSigned32BitRange
Access
Read-only
Table 695. Processor Device Upgrade Information
Name
processorDeviceUpgradeInformation
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.15
Description
Defines the processor upgrade information for the processor device.
Syntax
DellProcessorUpgradeInformation (See Processor Upgrade Information)
Access
Read-only
Table 696. Processor Device Version Name
Name
processorDeviceVersionName
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.16
Description
Defines the version name of the processor device.
Syntax
DellString
Access
Read-only
Table 697. Processor Device Core Count
Name
processorDeviceCoreCount
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.17
185
Description
Defines the number of processor cores detected for the processor
device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 698. Processor Device Core Enabled Count
Name
processorDeviceCoreEnabledCount
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.18
Description
Defines the number of processor cores enabled for the processor
device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 699. Processor Device Thread Count
Name
processorDeviceThreadCount
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.19
Description
Defines the number of processor threads detected for the processor
device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 700. Processor Device Characteristics
Name
processorDeviceCharacteristics
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.20
Description
This attribute defines characteristics of the processor device. This
attribute is a bit field where a bit has the meaning defined below when
set to 1 (one).
NOTE: Bits 2-15 need to be examined in the context of bit 1. If bit 1
is set, the processor characteristics are unknown and bits 2-15
cannot be used to determine if the functions associated with the
bits are supported.
Bit Position
Meaning if Set
Bit 0
Reserved
Bit 1
Unknown
Bit 2
64-bit capable
Bit 3-15
Reserved
Syntax
DellUnsigned16BitRange
Access
Read-only
186
Table 701. Processor Device Extended Capabilities
Name
processorDeviceExtendedCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.21
Description
This attribute defines extended capabilities of the processor device. This
attribute is a bit field where a bit has the meaning defined below when
set to 1 (one).
Bit Position
Meaning if Set
Bit 0
Virtualization Technology (VT)
supported
Bit 1
Demand-Based Switching (DBS)
supported
Bit 2
eXecute Disable (XD) supported
Bit 3
Hyper-Threading (HT) supported
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 702. Processor Device Extended Settings
Name
processorDeviceExtendedSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.22
Description
This attribute defines extended settings of the processor device. This
attribute is a bit field where a bit has the meaning defined below when
set to 1 (one).
Bit Position
Meaning if Set
Bit 0
Virtualization Technology (VT)
supported
Bit 1
Demand-Based Switching (DBS)
supported
Bit 2
eXecute Disable (XD) supported
Bit 3
Hyper-Threading (HT) supported
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 703. Processor Device Brand Name
Name
processorDeviceBrandName
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.23
Description
Defines the brand of the processor device.
Syntax
DellString
Access
Read-only
187
Table 704. Processor Device Model Name
Name
processorDeviceModelName
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.24
Description
Defines the model of the processor device.
Syntax
DellString
Access
Read-only
Table 705. Processor Device Stepping Name
Name
processorDeviceSteppingName
Object ID
1.3.6.1.4.1.674.10892.1.1100.30.1.25
Description
Defines the stepping of the processor device.
Syntax
DellString
Access
Read-only
Processor Device Status Table
Table 706. Processor Device Status Table
Name
processorDeviceStatusTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.32
Description
Defines the Processor Device Status Table.
Syntax
SEQUENCE OF ProcessorDeviceStatusTableEntry
Access
Not accessible
Table 707. Processor Device Status Table Entry
Name
processorDeviceStatusTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1
Description
Defines the Processor Device Status Table Entry.
Syntax
ProcessorDeviceStatusTableEntry
Access
Not accessible
Index
processorDeviceStatusChassisIndex
,
processorDeviceStatusIndex
Table 708. Processor Device Status Chassis Index
Name
processorDeviceStatusChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
188
Table 709. Processor Device Status Index
Name
processorDeviceStatusIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.2
Description
Defines the index (one-based) of the processor device status probe.
Syntax
DellObjectRange
Access
Read-only
Table 710. Processor Device Status State Capabilities
Name
processorDeviceStatusStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.3
Description
Defines the state capabilities of the processor device status probe.
Syntax
DellStateCapabilities
Access
Read-only
Table 711. Processor Device Status State Settings
Name
processorDeviceStatusStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.4
Description
Defines the state settings of the processor device status probe.
Syntax
DellStateSettings
Access
Read-only
Table 712. Processor Device Status Status
Name
processorDeviceStatusStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.5
Description
Defines the status of the processor device status probe. This status is
joined into the processorDeviceStatus attribute.
Syntax
DellStatus
Access
Read-only
Table 713. Processor Device Status Reading
Name
processorDeviceStatusReading
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.6
Description
Defines the reading of the processor device status probe.
Syntax
DellProcessorDeviceStatusReading
Access
Read-only
Table 714. Processor Device Status Location Name
Name
processorDeviceStatusLocationName
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.7
189
Description
Defines the location name of the processor device status probe.
Syntax
DellString
Access
Read-only
Table 715. Processor Device Status Port Index Reference
Name
processorDeviceStatusPortIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.32.1.8
Description
Defines the index (one-based) of the associated processor port in the
same chassis.
Syntax
DellObjectRange
Access
Read-only
Cache Device Table
Table 716. Cache Device Table
Name
cacheDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.40
Description
Defines the Cache Device Table.
Syntax
SEQUENCE OF CacheDeviceTableEntry
Access
Not accessible
Table 717. Cache Device Table Entry
Name
cacheDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1
Description
Defines the Cache Device Table entry.
Syntax
CacheDeviceTableEntry
Access
Not accessible
Index
cacheDevicechassisIndex
,
cacheDeviceIndex
Table 718. Cache Device Chassis Index
Name
cacheDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
190
Table 719. Cache Device Index
Name
cacheDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.2
Description
Defines the index of the cache device in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 720. Cache Device State Capabilities
Name
cacheDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.3
Description
Description Defines the capabilities of the cache device.
Syntax
DellStateCapabilities
Access
Read-only
Table 721. Cache Device State Settings
Name
cacheDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.4
Description
Description Defines the state of the cache device.
Syntax
DellStateSettings
Access
Read-only
Table 722. Cache Device Status
Name
cacheDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.5
Description
Defines the status of the cache device.
Syntax
DellStatus
Access
Read-only
Table 723. Cache Device Processor Device Index Reference
Name
cacheDeviceprocessorDeviceIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.6
Description
Defines the index number of the processor device with which this cache
device is associated.
Syntax
DellObjectRange
Access
Read-only
Table 724. Cache Device Type
Name
cacheDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.7
191
Description
Defines the type of cache device.
Syntax
DellCacheDeviceType (See Cache Device Type)
Access
Read-only
Table 725. Cache Device Location
Name
cacheDeviceLocation
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.8
Description
Defines the location of the cache device.
Syntax
DellCacheDeviceLocation (See Cache Device Location)
Access
Read-only
Table 726. Cache Device Status State
Name
cacheDeviceStatusState
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.9
Description
Defines the status state of the cache device.
Syntax
DellCacheDeviceStatusState (See Cache Device Status State)
Access
Read-only
Table 727. Cache Device External Socket Name
Name
cacheDeviceExternalSocketName
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.10
Description
Defines the external socket name of the cache device, if the cache is
socketed.
Syntax
DellString
Access
Read-only
Table 728. Cache Device Level
Name
cacheDeviceLevel
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.11
Description
Defines the level of the cache device.
Syntax
DellCacheDeviceLevel (See Cache Device Level)
Access
Read-only
Table 729. Cache Device Maximum Size
Name
cacheDeviceMaximumSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.12
Description
Defines the maximum size of the cache device in kilobytes (KB). A zero
(0) indicates that the size is unknown.
Syntax
DellUnsigned32BitRange
192
Access
Read-only
Table 730. Cache Device Current Size
Name
cacheDeviceCurrentSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.13
Description
Defines the current size of the cache device in KB. A zero (0) indicates
that the size is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 731. Cache Device Speed
Name
cacheDeviceSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.14
Description
Defines the speed of the cache device in nanoseconds. A zero (0)
indicates that the speed is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 732. Cache Device Write Policy
Name
cacheDeviceWritePolicy
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.15
Description
Defines the write policy of the cache device.
Syntax
DellCacheDeviceWritePolicy (See Cache Device Write Policy)
Access
Read-only
Table 733. Cache Device Is Socketed
Name
cacheDeviceIsSocketed
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.16
Description
Defines if the cache device is socketed.
Syntax
DellBoolean
Access
Read-only
Table 734. Cache Device Error Checking and Correction (ECC) Type
Name
cacheDeviceECCType
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.17
Description
Defines the type of error correction in use by the cache device.
Syntax
DellCacheDeviceECCType (See Cache Device ECC Type)
Access
Read-only
193
Table 735. Cache Device Associativity
Name
cacheDeviceAssociativity
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.18
Description
Defines the type of associativity in use by the cache device.
Syntax
DellCacheDeviceAssociativity (See Cache Device Associativity)
Access
Read-only
Table 736. Cache Device Supported Type
Name
cacheDeviceSupportedType
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.19
Description
Defines the type of static random-access memory (SRAM) that the
cache device can support.
Syntax
DellCacheDeviceSupportedType
Access
Read-only
Table 737. Cache Device Current Type
Name
cacheDeviceCurrentType
Object ID
1.3.6.1.4.1.674.10892.1.1100.40.1.20
Description
Defines the current type of SRAM for the cache device.
Syntax
DellCacheDeviceSRAMType (See Cache Device Static Random-Access
Memory (SRAM) Type)
Access
Read-only
Memory Device Table
Table 738. Memory Device Table
Name
memoryDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.50
Description
Defines the Memory Device Table.
Syntax
SEQUENCE OF MemoryDeviceTableEntry
Access
Not accessible
Table 739. Memory Device Table Entry
Name
memoryDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1
Description
Defines the Memory Device Table entry.
Syntax
MemoryDeviceTableEntry
Access
Not accessible
Index
memoryDevicechassisIndex
194
,
memoryDeviceIndex
Table 740. Memory Device Chassis Index
Name
memoryDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 741. Memory Device Index
Name
memoryDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.2
Description
Defines the index of the memory device in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 742. Memory Device State Capabilities
Name
memoryDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.3
Description
Defines the capabilities of the memory device.
Syntax
DellStateCapabilities
Access
Read-only
Table 743. Memory Device State Settings
Name
memoryDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.4
Description
Defines the state of the memory device.
Syntax
DellStateSettings
Access
Read-only
Table 744. Memory Device Status
Name
memoryDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.5
Description
Defines the status of the memory device.
Syntax
DellStatus
Access
Read-only
195
Table 745. Memory Device Memory Port Index Reference
Name
memoryDeviceMemoryPortIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.6
Description
Defines the index of the memory port of which this memory device is
part.
Syntax
DellObjectRange
Access
Read-only
Table 746. Memory Device Type
Name
memoryDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.7
Description
Defines the type of the memory device.
Syntax
DellMemoryDeviceType (See Memory Device Type)
Access
Read-only
Table 747. Memory Device Location Name
Name
memoryDeviceLocationName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.8
Description
Defines the location name of the memory device.
Syntax
DellString
Access
Read-only
Table 748. Memory Device Error Count
NOTE: Memory Device Failure Modes has now replaced this attribute. Memory Device Error Count
is no longer in use. If you use the Memory Device Error Count attribute, the value returned is
always zero, and using the attribute has no effect.
Name
memoryDeviceErrorCount
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.9
Description
Defines the total number of Error Checking and Correction (ECC) errors
detected by the memory device. Writing a 0 (zero) to this variable resets
the devices error counts.
Syntax
DellSigned32BitRange
Access
Read-only
Table 749. Memory Device Bank Location Name
Name
memoryDeviceBankLocationName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.10
Description
Defines the bank location name of the memory device.
Syntax
DellString
196
Access
Read-only
Table 750. Memory Device Type Details
Name
memoryDeviceTypeDetails
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.11
Description
Defines the detailed type of the memory device.
Syntax
DellMemoryDeviceTypeDetails (See Memory Device Type Details)
Access
Read-only
Table 751. Memory Device Form Factor
Name
memoryDeviceFormFactor
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.12
Description
Defines the form factor of the memory device.
Syntax
DellMemoryDeviceFormFactor (See Memory Device Type Form Factor)
Access
Read-only
Table 752. Memory Device Set
Name
memoryDeviceSet
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.13
Description
Defines if the memory device is a part of a set. A zero (0) indicates that
this device is not part of a set.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 753. Memory Device Size
NOTE: memoryDeviceSize is no longer in use. This attribute is deprecated and replaced by
memoryDeviceExtendedSize.
Name
memoryDeviceSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.14
Description
Defines the size in KB of the memory device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 754. Memory Device Speed
Name
memoryDeviceSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.15
Description
Defines the speed in nanoseconds of the memory device. A zero (0)
indicates that the speed is unknown.
Syntax
DellUnsigned32BitRange
197
Access
Read-only
Table 755. Memory Device Total Bus Width
Name
memoryDeviceTotalBusWidth
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.16
Description
Defines the total number of bits, including ECC, used by the memory
device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 756. Memory Device Total Data Bus Width
Name
memoryDeviceTotalDataBusWidth
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.17
Description
Defines the total number of data bits used by the memory device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 757. Memory Device Correctable Memory Event Count
NOTE: Memory Device Failure Modes has now replaced this attribute. Memory Device Correctable
Memory Event Count is no longer used. If you use the Memory Device Correctable Memory Event
Count attribute, the value returned is always zero, and using the attribute has no effect.
Name
memoryDeviceSingleBitErrorCount
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.18
Description
Defines the total number of Correctable Memory Events detected by the
memory device.
Syntax
DellSigned32BitRange
Access
Read-only
Table 758. Memory Device Uncorrectable Memory Event Count
NOTE: Memory Device Failure Modes has now replaced this attribute. Memory Device
Uncorrectable Memory Event Count is no longer used. If you use the Memory Device
Uncorrectable Memory Event Count attribute, the value returned is always zero, and using the
attribute has no effect.
Name
memoryDeviceMultiBitErrorCount
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.19
Description
Defines the total number of Uncorrectable Memory Events detected by
the memory device.
Syntax
DellSigned32BitRange
Access
Read-only
198
Table 759. Memory Device Failure Modes
Name
memoryDeviceFailureModes
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.20
Description
Defines the failure modes of the memory device when the
memoryDeviceStatus attribute is not OK. It is a bit field that can be used
to report more than one type of failure mode by using a combination of
the defined bit masks.
Syntax
DellMemoryDeviceFailureModes
Access
Read-only
Table 760. Memory Device Manufacturer Name
Name
memoryDeviceManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.21
Description
Defines the manufacturer of the memory device.
Syntax
DellString
Access
Read-only
Table 761. Memory Device Part Number Name
Name
memoryDevicePartNumberName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.22
Description
Defines the manufacturer's part number for the memory device.
Syntax
DellString
Access
Read-only
Table 762. Memory Device Serial Number Name
Name
memoryDeviceSerialNumberName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.23
Description
Defines the serial number of the memory device.
Syntax
DellString
Access
Read-only
Table 763. Memory Device Asset Tag Name
Name
memoryDeviceAssetTagName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.24
Description
Defines the asset tag of the memory device.
Syntax
DellString
Access
Read-only
199
Table 764. Memory Device Speed Name
Name
memoryDeviceSpeedName
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.25
Description
This attribute defines the speed of the memory device in string format
with units specified in string.
Syntax
DellString
Access
Read-only
Table 765. Memory Device Rank
Name
memoryDeviceRank
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.26
Description
1100.0050.0001.0026 — This attribute defines the Rank of the memory
device (DIMM). Zero indicates an unknown.
Value
Meaning
deviceRankIsUnknown(0)
Rank is unknown
deviceRankIsSingle(1)
Rank is Single
deviceRankIsDual(2)
Rank is Dual
deviceRankIsQuad(4)
Rank is Quad
deviceRankIsOctal(8)
Rank is Octal
deviceRankIsHexa(16)
Rank is Hexa
Syntax
DellMemoryDeviceRank
Access
Read-only
Table 766. Memory Device Extended Size
NOTE: This attribute replaces the memoryDeviceSize.
Name
memoryDeviceExtendedSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.50.1.27
Description
This attribute defines the size in MBytes of the memory device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Memory Device Mapped Address Table
Table 767. Memory Device Mapped Address Table
Name
memoryDeviceMappedAddressTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.60
Description
Defines the Memory Device Mapped Address Table.
Syntax
SEQUENCE OF MemoryDeviceMappedAddressTableEntry
200
Access
Not accessible
Table 768. Memory Device Mapped Address Table Entry
Name
memoryDeviceMappedAddressTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1
Description
Defines the Memory Device Mapped Address Table entry.
Syntax
MemoryDeviceMappedAddressTableEntry
Access
Not accessible
Index
memoryDeviceMappedAddresschassisIndex
,
memoryDeviceMappedAddressIndex
Table 769. Memory Device Mapped Address Chassis Index
Name
memoryDeviceMappedAddresschassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 770. Memory Device Mapped Address Index
Name
memoryDeviceMappedAddressIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.2
Description
Defines the index (one-based) of the memory device mapped address in
this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 771. Memory Device Mapped Address State Capabilities
Name
memoryDeviceMappedAddressStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.3
Description
Defines the capabilities of the memory device mapped address.
Syntax
DellStateCapabilities
Access
Read-only
Table 772. Memory Device Mapped Address State Settings
Name
memoryDeviceMappedAddressStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.4
Description
Defines the state of the memory device mapped address.
201
Syntax
DellStateSettings
Access
Read-only
Table 773. Memory Device Mapped Address Status
Name
memoryDeviceMappedAddressStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.5
Description
Defines the status of the memory device mapped address.
Syntax
DellStatus
Access
Read-only
Table 774. Memory Device Index Reference
Name
memoryDeviceIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.6
Description
Defines the index of the memory device(s) associated with this memory
device mapped address.
Syntax
DellObjectRange
Access
Read-only
Table 775. Memory Device Mapped Address Row Position
Name
memoryDeviceMappedAddressRowPosition
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.7
Description
Defines the position of the referenced memory in a row of the memory
device mapped address.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 776. Memory Device Mapped Address Interleave Position
Name
memoryDeviceMappedAddressInterleavePosition
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.8
Description
Defines the position of the referenced memory in an interleave of the
memory device mapped address.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 777. Memory Device Mapped Address Interleave Depth
Name
memoryDeviceMappedAddressInterleaveDepth
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.9
Description
Defines the maximum number of consecutive rows from the referenced
memory device that are accessed in a single interleaved transfer in the
memory device mapped address.
202
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 778. Memory Device Mapped Address Starting Address
Name
memoryDeviceMappedAddressStartingAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.10
Description
Defines the physical starting address in KB of the memory device
mapped address.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 779. Memory Device Mapped Address Ending Address
Name
memoryDeviceMappedAddressEndingAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.60.1.11
Description
Defines the physical ending address in KB of the memory device
mapped address.
Syntax
DellUnsigned64BitRange
Access
Read-only
Generic Device Table
Table 780. Generic Device Table
Name
genericDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.70
Description
Defines the Generic Device Table.
Syntax
SEQUENCE OF GenericDeviceTableEntry
Access
Not accessible
Table 781. Generic Device Table Entry
Name
genericDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1
Description
Defines the Generic Device Table entry.
Syntax
GenericDeviceTableEntry
Access
Not accessible
Index
genericDevicechassisIndex
,
genericDeviceIndex
203
Table 782. Generic Device Chassis Index
Name
genericDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 783. Generic Device Index
Name
genericDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.2
Description
Defines the index of the generic device in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 784. Generic Device State Capabilities
Name
genericDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.3
Description
Defines the capabilities of the generic device.
Syntax
DellStateCapabilities
Access
Read-only
Table 785. Generic Device State Settings
Name
genericDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.4
Description
Defines the state of the generic device.
Syntax
DellStateSettings
Access
Read-only
Table 786. Generic Device Status
Name
genericDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.5
Description
Defines the status of the generic device.
Syntax
DellStatus
Access
Read-only
Table 787. Generic Device System Slot Index Reference
Name
genericDeviceSystemSlotIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.6
204
Description
Defines the index of the system slot into which this generic device is
plugged.
Syntax
DellObjectRange
Access
Read-only
Table 788. Generic Device Type
Name
genericDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.7
Description
Defines the type of the generic device.
Syntax
DellGenericDeviceType (See Generic Device Type)
Access
Read-only
Table 789. Generic Device Name
Name
genericDeviceName
Object ID
1.3.6.1.4.1.674.10892.1.1100.70.1.8
Description
Defines the name of the generic device.
Syntax
DellString
Access
Read-only
PCI Device Table
Table 790. PCI Device Table
Name
pCIDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.80
Description
Defines the PCI Device Detail Table.
Syntax
SEQUENCE OF PCIDeviceTableEntry
Access
Not accessible
Table 791. PCI Device Table Entry
Name
pCIDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1
Description
Defines the PCI Device Table entry.
Syntax
PCIDeviceTableEntry
Access
Not accessible
Index
pCIDevicechassisIndex
,
pCIDeviceIndex
205
Table 792. PCI Device Chassis Index
Name
pCIDevicechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 793. PCI Device Index
Name
pCIDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.2
Description
Defines the index (one-based) of the PCI device in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 794. PCI Device State Capabilities
Name
pCIDeviceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.3
Description
Defines the capabilities of the PCI device.
Syntax
DellStateCapabilities
Access
Read-only
Table 795. PCI Device State Settings
Name
pCIDeviceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.4
Description
Defines the state of the PCI device.
Syntax
DellStateSettings
Access
Read-only
Table 796. PCI Device Status
Name
pCIDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.5
Description
Defines the status of the PCI device.
Syntax
DellStatus
Access
Read-only
Table 797. PCI Device System Slot Index Reference
Name
pCIDeviceSystemSlotIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.6
206
Description
Defines the index number of the system slot that this PCI device is in.
Syntax
DellObjectRange
Access
Read-only
Table 798. PCI Device Data Bus Width
Name
pCIDeviceDataBusWidth
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.7
Description
Defines the bus width of the PCI device in this chassis.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 799. PCI Device Manufacturer Name
Name
pCIDeviceManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.8
Description
Defines the name of the PCI device manufacturer.
Syntax
DellString
Access
Read-only
Table 800. PCI Device Description Name
Name
pCIDeviceDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.9
Description
Defines the descriptive name of the PCI device.
Syntax
DellString
Access
Read-only
Table 801. PCI Device Speed
Name
pCIDeviceSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.10
Description
Defines the bus speed in MHz of the PCI device in this chassis. A zero (0)
indicates that the speed is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 802. PCI Device Adapter Fault
Name
pCIDeviceAdapterFault
Object ID
1.3.6.1.4.1.674.10892.1.1100.80.1.11
Description
Defines whether the PCI device in this chassis has detected a fault.
Syntax
DellBoolean
Access
Read-only
207
PCI Device Configuration Space Table
Table 803. PCI Device Configuration Space Table
Name
pCIDeviceConfigurationSpaceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.82
Description
Defines the PCI Device Configuration Table.
Syntax
SEQUENCE OF PCIDeviceConfigurationSpaceTableEntry
Access
Not accessible
Table 804. PCI Device Configuration Space Table Entry
Name
pCIDeviceConfigurationSpaceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1
Description
Defines the PCI Device Configuration Table entry.
Syntax
PCIDeviceConfigurationSpaceTableEntry
Access
Not accessible
Index
pCIDeviceConfigurationSpacechassisIndex
,
pCIDeviceConfigurationSpaceIndex
Table 805. PCI Device Configuration Space Chassis Index
Name
pCIDeviceConfigurationSpacechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 806. PCI Device Configuration Space Index
Name
pCIDeviceConfigurationSpaceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.2
Description
Defines the index (one-based) of the PCI device configuration in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 807. PCI Device Configuration Space State Capabilities
Name
pCIDeviceConfigurationSpaceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.3
Description
Defines the capabilities of the PCI device configuration.
Syntax
DellStateCapabilities
208
Access
Read-only
Table 808. PCI Device Configuration Space State Settings
Name
pCIDeviceConfigurationSpaceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.4
Description
Defines the state of the PCI device configuration.
Syntax
DellStateSettings
Access
Read-only
Table 809. PCI Device Configuration Space Status
Name
pCIDeviceConfigurationSpaceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.5
Description
Defines the status of the PCI device configuration.
Syntax
DellStatus
Access
Read-only
Table 810. PCI Device Index Reference
Name
pCIDeviceIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.6
Description
Defines the index number of PCI device that this configuration applies
to.
Syntax
DellObjectRange
Access
Read-only
Table 811. PCI Device Configuration Space Bus Number
Name
pCIDeviceConfigurationSpaceBusNumber
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.7
Description
Defines the bus number of the PCI device configuration in this chassis.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 812. PCI Device Configuration Space Device Number
Name
pCIDeviceConfigurationSpaceDeviceNumber
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.8
Description
Defines the device number of the PCI device in this chassis.
Syntax
DellUnsigned32BitRange
Access
Read-only
209
Table 813. PCI Device Configuration Space Function Number
Name
pCIDeviceConfigurationSpaceFunctionNumber
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.9
Description
Defines the function number of the PCI device in this chassis.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 814. PCI Device Configuration Space Header
Name
pCIDeviceConfigurationSpaceHeader
Object ID
1.3.6.1.4.1.674.10892.1.1100.82.1.10
Description
Defines the common configuration space header of the PCI device.
Syntax
Octet String (SIZE(0.1025))
Access
Read-only
Network Device Table
Table 815. Network Device Table
Name
networkDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.90
Description
Defines the Network Device Table.
Syntax
SEQUENCE OF NetworkDeviceTableEntry
Access
Not accessible
Table 816. Network Device Table Entry
Name
networkDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1
Description
Defines the Network Device Table Entry.
Syntax
NetworkDeviceTableEntry
Access
Not accessible
Index
networkDeviceChassisIndex
,
networkDeviceIndex
Table 817. Network Device Chassis Index
Name
networkDeviceChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.1
Description
Defines the index (one-based) of the chassis that contains the network
device.
Syntax
DellObjectRange
210
Access
Read-only
Table 818. Network Device Index
Name
networkDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.2
Description
Defines the index (one-based) of the network device.
Syntax
DellObjectRange
Access
Read-only
Table 819. Network Device Status
Name
networkDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.3
Description
Defines the status of the network device.
Syntax
DellStatus
Access
Read-only
Table 820. Network Device Connection Status
Name
networkDeviceConnectionStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.4
Description
Defines the connection status of the network device.
Syntax
DellNetworkDeviceConnectionStatus (See Network Device Connection
Status)
Access
Read-only
Table 821. Network Device Description Name
Name
networkDeviceDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.5
Description
Defines the description of the network device.
Syntax
DellString
Access
Read-only
Table 822. Network Device Product Name
Name
networkDeviceProductName
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.6
Description
Defines the product name of the network device.
Syntax
DellString
Access
Read-only
211
Table 823. Network Device Vendor Name
Name
networkDeviceVendorName
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.7
Description
Defines the name of the vendor of the network device.
Syntax
DellString
Access
Read-only
Table 824. Network Device Service Name
Name
networkDeviceServiceName
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.8
Description
Defines the service name of the network device.
Syntax
DellString
Access
Read-only
Table 825. Network Device Driver Image Path Name
Name
networkDeviceDriverImagePathName
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.9
Description
Defines the path to the binary image of the driver for the network
device.
Syntax
DellString
Access
Read-only
Table 826. Network Device Driver Version Name
Name
networkDeviceDriverVersionName
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.10
Description
Defines the version of the driver for the network device.
Syntax
DellString
Access
Read-only
Table 827. Network Device IP Address
Name
networkDeviceIPAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.11
Description
Defines the IP address of the network device.
Syntax
IpAddress
Access
Read-only
Table 828. Network Device IP Subnet Mask
Name
networkDeviceIPSubnetMask
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.12
212
Description
Defines the IP subnet mask for the IP address currently assigned to the
network device.
Syntax
IpAddress
Access
Read-only
Table 829. Network Device Default Gateway IP Address
Name
networkDeviceDefaultGatewayIPAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.13
Description
Defines the IP address of the default gateway for the network device.
Syntax
IpAddress
Access
Read-only
Table 830. Network Device DHCP Server IP Address
Name
networkDeviceDHCPServerIPAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.14
Description
Defines the IP address of the DHCP server that was used to obtain the IP
address of the network device if DHCP was used to configure the
network device.
Syntax
IpAddress
Access
Read-only
Table 831. Network Device Current MAC Address
Name
networkDeviceCurrentMACAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.15
Description
Defines the current MAC address of the network device.
Syntax
DellMACAddress
Access
Read-only
Table 832. Network Device Permanent MAC Address
Name
networkDevicePermanentMACAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.16
Description
Defines the permanent MAC address of the network device.
Syntax
DellMACAddress
Access
Read-only
Table 833. Network Device PCI Bus Number
Name
networkDevicePCIBusNumber
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.17
Description
Defines the PCI bus number of the network device.
213
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 834. Network Device PCI Device Number
Name
networkDevicePCIDeviceNumber
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.18
Description
Defines the PCI device number of the network device.
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 835. Network Device PCI Function Number
Name
networkDevicePCIFunctionNumber
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.19
Description
Defines the PCI function number of the network device.
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 836. Network Device IRQ
Name
networkDeviceIRQ
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.20
Description
Defines the interrupt request number of the network device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 837. Network Device Base IO Port Address
Name
networkDeviceBaseIOPortAddress
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.21
Description
Defines the base input/output port address of the network device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 838. Network Device Teaming Flags
Name
networkDeviceTeamingFlags
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.22
Description
Defines the teaming features of the network device.
Syntax
DellNetworkDeviceTeamingFlags (See Network Device Teaming Flags)
Access
Read-only
214
Table 839. Network Device TOE Capability Flags
Name
networkDeviceTOECapabilityFlags
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.23
Description
Defines the TCP/IP Offload Engine (TOE) capability flags of the network
device.
Syntax
DellNetworkDeviceTOECapabilityFlags (See Network Device TOE
Capability Flags)
Access
Read-only
Table 840. Network Device TOE Enabled
Name
networkDeviceTOEEnabled
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.24
Description
Defines if TOE is enabled for the network device.
Syntax
DellBoolean
Access
Read-only
Table 841. Network Device RDMA Capability Flags
Name
networkDeviceRDMACapabilityFlags
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.25
Description
Defines the Remote Direct Memory Access (RDMA) capability flags of
the network device.
Syntax
DellNetworkDeviceRDMACapabilityFlags (See Network Device RDMA
Capability Flags)
Access
Read-only
Table 842. Network Device RDMA Enabled
Name
networkDeviceRDMAEnabled
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.26
Description
Defines if RDMA is enabled for the network device.
Syntax
DellBoolean
Access
Read-only
Table 843. Network Device iSCSI Capability Flags
Name
networkDeviceiSCSICapabilityFlags
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.27
Description
Defines the Internet Small Computer System Interface (iSCSI) capability
flags of the network device.
Syntax
DellNetworkDeviceiSCSICapabilityFlags (See Network Device iSCSI
Capability Flags)
Access
Read-only
215
Table 844. Network Device iSCSI Enabled
Name
networkDeviceiSCSIEnabled
Object ID
1.3.6.1.4.1.674.10892.1.1100.90.1.28
Description
Defines if iSCSI is enabled for the network device.
Syntax
DellBoolean
Access
Read-only
Managed System Services Device Table
Table 845. Managed System Services Device Table
Name
Object ID
1.3.6.1.4.1.674.10892.1.1100.100
Description
Defines the Managed System Services Device Table.
Syntax
Sequence of ManagedSystemServicesDeviceTable
Access
Not accessible
Table 846. Managed System Services Device Table Entry
Name
managedSystemServicesDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1
Description
Defines the managed system services device table entry.
Syntax
ManagedSystemServicesDeviceTableEntry
Access
Not accessible
Index
managedSystemServicesDeviceChassisIndex
,
managedSystemServicesDeviceIndex
Table 847. Managed System Services Device Chassis Index
Name
managedSystemServicesDeviceChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1.1
Description
Defines the index (one-based) of the chassis that contains the managed
system services device.
Syntax
DellObjectRange
Access
Read-only
Table 848. Managed System Services Device Index
Name
managedSystemServicesDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1.2
Description
Defines the index (one-based) of the managed system services device.
Syntax
DellObjectRange
216
Access
Read-only
Table 849. Managed System Services Device Status
Name
managedSystemServicesDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1.3
Description
Defines the status of the managed system services device.
Syntax
DellStatus
Access
Read-only
Table 850. Managed System Services Device Type
Name
managedSystemServicesDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1.4
Description
Defines the type of the managed system services device.
Syntax
DellManagedSystemServicesDeviceType (See Managed System Services
Device Type)
Access
Read-only
Table 851. Managed System Services Device Storage Present
Name
managedSystemServicesDeviceStoragePresent
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1.5
Description
Defines whether storage is present on the managed system services
device.
Syntax
DellBoolean
Access
Read-only
Table 852. Managed System Services Device Storage Size
Name
managedSystemServicesDeviceStorageSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.100.1.6
Description
Defines the size in Megabytes (MB) of the storage present on the
managed system services device.
Syntax
DellUnsigned32BitRange
Access
Read-only
SD Card Unit Table
Table 853. SD Card Unit Table
Name
sdCardUnitTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.110
Description
Defines the SD Card Unit Table.
Syntax
SEQUENCE OF SdCardUnitTableEntry
217
Access
Not accessible
Table 854. SD Card Unit Table Entry
Name
sdCardUnitTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1
Description
Defines the SD Card Unit Table Entry.
Syntax
SdCardUnitTableEntry
Access
Not accessible
Index
sdCardUnitChassisIndex
,
sdCardUnitIndex
Table 855. SD Card Unit Chassis Index
Name
sdCardUnitChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.1
Description
Defines the index (one-based) of the chassis that contains the SD Card
unit.
Syntax
DellObjectRange
Access
Read-only
Table 856. SD Card Unit Index
Name
sdCardUnitIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.2
Description
Defines the index (one-based) of the SD Card unit.
Syntax
DellObjectRange
Access
Read-only
Table 857. SD Card Unit State Capabilities
Name
sdCardUnitStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.3
Description
Defines the state capabilities of the SD Card unit.
Syntax
DellStateCapabilities
Access
Read-only
Table 858. SD Card Unit State Settings
Name
sdCardUnitStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.4
Description
Defines the state settings of the SD Card unit.
Syntax
DellStateSettings
218
Access
Read-only
Table 859. SD Card Unit Redundancy Status
Name
sdCardUnitRedundancyStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.5
Description
Defines the redundancy status of the SD Card unit.
Syntax
DellStatusRedundancy
Access
Read-only
Table 860. SD Card Unit Count For Redundancy
Name
sdCardUnitCountForRedundancy
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.6
Description
Defines the total number of SD Card devices required for this SD Card
unit to have full redundancy.
Syntax
DellObjectRange
Access
Read-only
Table 861. SD Card Unit Name
Name
sdCardUnitName
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.7
Description
Defines the name of the SD Card unit.
Syntax
DellString
Access
Read-only
Table 862. SD Card Unit Status
Name
sdCardUnitStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.110.1.8
Description
Defines the status of the SD Card unit.
Syntax
DellStatus
Access
Read-only
SD Card Device Table
Table 863. SD Card Device Table
Name
sdCardDeviceTable
Object ID
1.3.6.1.4.1.674.10892.1.1100.112
Description
Defines the SD Card Device Table.
Syntax
SEQUENCE OF SdCardDeviceTableEntry
Access
Not accessible
219
Table 864. SD Card Device Table Entry
Name
sdCardDeviceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1
Description
Defines the SD Card Device Table Entry.
Syntax
SdCardDeviceTableEntry
Access
Not accessible
Index
sdCardDeviceChassisIndex
,
sdCardDeviceIndex
Table 865. SD Card Device Chassis Index
Name
sdCardDeviceChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.1
Description
Defines the index (one-based) of the chassis that contains the SD Card
device.
Syntax
DellObjectRange
Access
Read-only
Table 866. SD Card Device Index
Name
sdCardDeviceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.2
Description
Defines the index (one-based) of the SD Card device.
Syntax
DellObjectRange
Access
Read-only
Table 867. SD Card Device Status
Name
sdCardDeviceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.3
Description
Defines the status of the SD Card device.
Syntax
DellStatus
Access
Read-only
Table 868. SD Card Device Type
Name
sdCardDeviceType
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.4
Description
Defines the type of the SD Card device.
Syntax
DellSDCardDeviceType
Access
Read-only
220
Table 869. SD Card Device Config Capabilities
Name
sdCardDeviceConfigCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.5
Description
Defines the configuration capabilities of the SD Card device.
Syntax
DellSDCardDeviceConfigCapabilities
Access
Read-only
Table 870. SD Card Device Config Settings
Name
sdCardDeviceConfigSettings
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.6
Description
Defines the configuration settings of the SD Card device.
Syntax
DellSDCardDeviceConfigSettings
Access
Read-only
Table 871. SD Card Device Location Name
Name
sdCardDeviceLocationName
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.7
Description
Defines the location of the SD Card device.
Syntax
DellString
Access
Read-only
Table 872. SD Card Device Card Present
Name
sdCardDeviceCardPresent
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.8
Description
Defines whether the SD Card is present for the SD Card device.
Syntax
DellBoolean
Access
Read-only
Table 873. SD Card Device Card State
Name
sdCardDeviceCardState
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.9
Description
Defines the state of the SD Card.
Syntax
DellSDCardDeviceCardState
Access
Read-only
Table 874. SD Card Device Card Storage Size
Name
sdCardDeviceCardStorageSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.10
221
Description
Defines the storage size in MB (megabytes) of the SD card for the SD
Card device.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 875. SD Card Device Unit Index Reference
Name
sdCardDeviceUnitIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.11
Description
Defines the index to the associated SD Card unit if the SD Card device is
part of a SD Card unit.
Syntax
DellObjectRange
Access
Read-only
Table 876. SD Card Device Card Available Storage Size
Name
sdCardDeviceCardAvailableStorageSize
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.12
Description
Defines the available storage size in MB (megabytes) of the SD card for
the SD card device.
Syntax
DellSigned32BitRange
Access
Read-only
Table 877. SD Card Device Card Licensed
Name
sdCardDeviceCardLicensed
Object ID
1.3.6.1.4.1.674.10892.1.1100.112.1.13
Description
Defines whether the SD card is licensed by the system vendor.
Syntax
DellSDCardDeviceCardLicensed
Access
Read-only
Device Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 878. Pointing Device Type
Variable Name: DellPointingDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOther(
1)
Device type is not one of the following:
deviceTypeIsUnknow
n(2)
Device type is unknown.
deviceTypeIsAMous
e(3)
Device type is a mouse.
222
deviceTypeIsATrack
Ball(4)
Device type is a track ball.
deviceTypeIsATrack
Point(5)
Device type is a track point.
deviceTypeIsAGlide
Point(6)
Device type is a glide point.
deviceTypeIsATouch
Pad(7)
Device type is a touch pad.
Table 879. Processor Device Status State
Variable Name:DellProcessorDeviceStatusState
Data Type:Integer
Possible Data Values
Meaning of Data Value
other(1)
Processor device type is not one of the
following:
unknown(2)
Device type is unknown.
enabled(3)
Device is enabled.
userDisabled(4)
Device is disabled by the user.
biosDisabled(5)
Device has its BIOS disabled.
idle(6)
Device is idle.
Table 880. Processor Device Status Reading
Variable Name:DellProcessorDeviceStatusReading
Data Type:Integer
NOTE: These values are bit masks, so combination values are
possible.
Possible Data Values
Meaning of Data Value
internalError(1)
The processor experienced an internal error
thermalTrip(2)
The processor experienced a thermal trip
configurationErro The processor experienced a configuration
r(32)
error
processorPresent( The processor is present
128)
processorDisable
d(256)
The processor is disabled
terminatorPresen
t(512)
The terminator is Present
processorThrottle The processor is throttled
d(1024)
Table 881. Processor Device Type
Variable Name:DellProcessorDeviceType
223
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOthe
r(1)
The processor device type is not one of the
following values:
deviceTypeIsUnkno The processor device type is unknown.
wn(2)
deviceTypeIsCPU(3 The processor device type is a central
)
processing unit.
deviceTypeIsMathP The processor device type is a math
rocessor(4)
processor.
deviceTypeIsDSP(5 The processor device type is a digital signal
)
processor.
deviceTypeIsAVide The processor device is a video processor.
oProcessor(6)
Table 882. Processor Upgrade Information
Variable Name:DellProcessorUpgradeInformation
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOthe
r(1)
The upgrade device type is not one of the
following:
processorUpgradeI Upgrade device type is unknown.
sUnknown(2)
processorUpgradeI Upgrade device is on a daughter board.
sByDaughterBoard(
3)
processorUpgradeI Upgrade device is in a zero insertion force
sByZIFSocket(4)
(ZIF) socket.
processorUpgradeI Upgrade device is a replacement.
sByReplacement(5)
processorUpgradeI There is no upgrade device.
sNone(6)
processorUpgradeI Upgrade device is in a low insertion force
sByLIFSocket(7)
(LIF) socket.
processorUpgradeI Upgrade device is a SLOT 1 processor.
sBySlot1(8)
processorUpgradeI Upgrade device is a SLOT 2 processor.
sBySlot2(9)
processorUpgradeI Upgrade device is a 370 pin socket.
sBy370PinSocket(1
0)
processorUpgradeI Upgrade is by Slot A.
sBySlotA(11)
224
processorUpgradeI Upgrade is by Slot M.
sBySlotM(12)
processorUpgradeI Upgrade is by Socket 423.
sByScoket423(13)
processorUpgradeI Upgrade is by Socket A (Socket 462).
sBySocketA(14)
processorUpgradeI Upgrade is by Socket 478.
sBySocket478(15)
processorUpgradeI Upgrade is by Socket 754.
sBySocket754(16)
processorUpgradeI Upgrade is by Socket 940.
sBySocket940(17)
processorUpgradeI Upgrade is by Socket 939.
sBySocket939(18)
processorUpgradeI Upgrade is by Socket mPGA604.
sBySocketmPGA604(
19)
processorUpgradeI Upgrade is by Socket LGA771.
sBySocketLGA771(2
0)
processorUpgradeI Upgrade is by Socket LGA775.
sBySocketLGA775(2
1)
processorUpgradeI Upgrade is by Socket S1.
sBySocketS1(22)
processorUpgradeI Upgrade is by Socket AM2.
sBySocketAM2(23)
processorUpgradeI Upgrade is by Socket F (1207).
sBySocketF(24)
processorUpgradeI Upgrade is by Socket LGA1366.
sBySocketLGA1366(
25)
Table 883. Processor Device Family
Variable Name:DellProcessorDeviceFamily
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceFamilyIsOth The processor family is not one of the
er(1)
following values.
deviceFamilyUnkno The processor family is unknown.
wn(2)
deviceFamilyIs808 The processor family is 8086.
6(3)
225
deviceFamilyIs802 The processor family is 80286.
86(4)
deviceFamilyIs803 The processor family is 80386.
86(5)
deviceFamilyIs804 The processor family is 80486.
86(6)
deviceFamilyIS808 The processor family is 8087.
7(7)
deviceFamilyIs802 The processor family is 80287.
87(8)
deviceFamilyIs803 The processor family is 80387.
87(9)
deviceFamilyIs804 The processor family is 80487.
87(10)
deviceFamilyIsPen The processor family is Intel Pentium.
tium(11)
deviceFamilyIsPen The processor family is Pentium Pro.
tiumPro(12)
deviceFamilyIsPen The processor family is Pentium II.
tium2(13)
deviceFamilyIsPen The processor family is Pentium MMX.
tiumMMX(14)
deviceFamilyIsCel The processor family is Celeron.
eron(15)
deviceFamilyIsXeo The processor family is Xeon.
n(16)
deviceFamilyIsPen The processor family is Pentium III.
tium3(17)
deviceFamilyIsPen The processor family is Pentium III Xeon.
tium3Xeon(18)
deviceFamilyIsPen The processor family is Pentium III Speed
tium3Step(19)
Step.
deviceFamilyIsPen The processor family is Itanium.
tiumItanium (20)
deviceFamilyIsInt The processor family is Intel Xeon.
elXeon(21)
deviceFamilyIsPen The processor family is Pentium 4.
tium4(22)
deviceFamilyIsInt The processor family is Intel Xeon MP.
elXeonMP(23)
deviceFamilyIsInt The processor family is Intel Itanium 2.
elItanium2(24)
deviceFamilyIsK5( The processor family is K5.
25)
226
deviceFamilyIsK6( The processor family is K6.
26)
deviceFamilyIsK6- The processor family is K6-2.
2(27)
deviceFamilyIsK6- The processor family is K6-3.
3(28)
deviceFamilyIsAMD The processor family is AMD Athlon.
Athlon(29)
deviceFamilyIsAMD The processor family is AMD2900.
2900(30)
deviceFamilyIsK6- The processor family is K6-2+.
2Plus(31)
deviceFamilyIsPow The processor family is Power PC.
erPC(32)
deviceFamilyIsPow The processor family is Power PC 601.
erPC601(33)
deviceFamilyIsPow The processor family is Power PC 603.
erPC603(34)
deviceFamilyIsPow The processor family is Power PC 603+.
erPC603Plus (35)
deviceFamilyIsPow The processor family is Power PC 604.
erPC604(36)
deviceFamilyIsPow The processor family is Power PC 620.
erPC620(37)
deviceFamilyIsPow The processor family is Power PC x704.
erPCx704(38)
deviceFamilyIsPow The processor family is Power PC 750.
erPC750(39)
deviceFamilyIsInt The processor family is Intel Core Duo.
elCoreDuo(40)
deviceFamilyIsInt The processor family is Intel Core Duo
elCoreDuoMobi
mobile.
le(41)
deviceFamilyIsInt The processor family is Intel Core Solo
elCoreSoloMob
mobile.
ile(42)
deviceFamilyIsInt The processor family is Intel Atom.
elAtom(43)
deviceFamilyIsAlp The processor family is Alpha.
ha(48)
deviceFamilyIsAlp The processor family is Alpha 21064.
ha21064(49)
deviceFamilyIsAlp The processor family is Alpha 21066.
ha21066(50)
227
deviceFamilyIsAlp The processor family is Alpha 21164.
ha21164(51)
deviceFamilyIsAlp The processor family is Alpha 21164PC.
ha21164PC(52)
deviceFamilyIsAlp The processor family is Alpha 21164a.
ha21164a(53)
deviceFamilyIsAlp The processor family is Alpha 21264.
ha21264(54)
deviceFamilyIsAlp The processor family is Alpha 21364.
ha21364(55)
deviceFamilyIsAMD The processor family is AMD Turion II Ultra
TurionIIUltra
Dual-Core Mobile M Processor Family.
DualMobileM(56)
deviceFamilyIsAMD The processor family is AMD Turion II DualTurionIIDualM
Core Mobile M Processor Family. .
obileM(57)
deviceFamilyIsAMD The processor family is AMD Athlon II DualAthlonIIDualM
Core Mobile M Processor Family.
obileM(58)
deviceFamilyIsAMD The processor family is AMD Opteron 6100
Opteron6100 (59) Series Processor.
deviceFamilyIsAMD The processor family is AMD Opteron 4100
Opteron4100 (60) Series Processor.
deviceFamilyIsAMD The processor family is AMD Opteron 6200
Opteron6200 (61) Series Processor.
deviceFamilyIsAMD The processor family is AMD Opteron 4200
Opteron4200 (62) Series Processor.
deviceFamilyIsMIP The processor family is MIPS
S(64)
deviceFamilyIsMIP The processor family is MIPS R4000.
SR4000(65)
deviceFamilyIsMIP The processor family is MIPS R4200.
SR4200(66)
deviceFamilyIsMIP The processor family is MIPS R4400.
SR4400(67)
deviceFamilyIsMIP The processor family is MIPS R4600.
SR4600(68)
deviceFamilyIsMIP The processor family is MIPS R10000.
SR10000(69)
deviceFamilyIsSPA The processor family is SPARC.
RC(80)
deviceFamilyIsSup The processor family is SuperSPARC.
erSPARC(81)
228
deviceFamilyIsmic The processor family is microSPARC II.
roSPARCII(82)
deviceFamilyIsmic The processor family is microSPARC IIep.
roSPARCIIep (83)
deviceFamilyIsUlt The processor family is UltraSPARC.
raSPARC(84)
deviceFamilyIsUlt The processor family is UltraSPARC II.
raSPARCII(85)
deviceFamilyIsUlt The processor family is UltraSPARC IIi.
raSPARCIIi(86)
deviceFamilyIsUlt The processor family is UltraSPARC III.
raSPARCIII(87)
deviceFamilyIsUlt The processor family is UltraSPARC IIIi.
raSPARCIIIi (88)
deviceFamilyIs680 The processor family is 68040 Family.
40(96)
deviceFamilyIs68x The processor family is 68xxx.
xx(97)
deviceFamilyIs680 The processor family is 6800.
00(98)
deviceFamilyIs680 The processor family is 68010.
10(99)
deviceFamilyIs680 The processor family is 68020.
20(100)
deviceFamilyIs680 The processor family is 68030.
30(101)
deviceFamilyIsHob The processor family is Hobbit.
bit(112)
deviceFamilyIsCru The processor family is Crusoe 5000.
soe5000(120)
deviceFamilyIsCru The processor family is Crusoe 3000.
soe3000(121)
deviceFamilyIsEff The processor family is Efficeon 8000.
iceon8000 (122)
deviceFamilyIsWei The processor family is Weitek.
tek(128)
deviceFamilyIsInt The processor family is Intel Celeron M.
elCeleronM(130)
deviceFamilyIsAMD The processor family is AMD Athlon 64.
Athlon64(131)
deviceFamilyIsAMD The processor family is AMD Opteron.
Opteron(132)
deviceFamilyIsAMD The processor family is AMD Sempron.
Sempron(133)
229
deviceFamilyIsAMD The processor family is AMD Turion 64
Turion64Mobile(13 Mobile Technology.
4)
deviceFamilyIsDua The processor family is Dual-Core AMD
lCoreAMDOpter
Opteron.
on(135)
deviceFamilyIsAMD The processor family is AMD Athlon 64 X2
Athlon64X2Dual
Dual-Core.
Core(136)
deviceFamilyIsAMD The processor family is AMD Turion 64 X2
Turion64X2Mob
Mobile Technology.
ile(137)
deviceFamilyIsQua The processor family is Quad-Core AMD
dCoreAMDOpter
Opteron.
on(138)
deviceFamilyIsThi The processor family is thirdgeneration AMD
rdGeneration
Opteron.
AMDOpteron(139)
deviceFamilyIsAMD The processor family is AMD Phenom FX
PhenomFXQuadC
Quad-Core.
ore(140)
deviceFamilyIsAMD The processor family is AMD Phenom X4
PhenomX4QuadC
Quad-Core.
ore(141)
deviceFamilyIsAMD The processor family is AMD Phenom X2
PhenomX2DualC
Dual-Core.
ore(142)
deviceFamilyIsAMD The processor family is AMD Athlon X2
AthlonX2DualC
Dual-Core.
ore(143)
deviceFamilyIsPA- The processor family is PA-RISC.
RISC(144)
deviceFamilyIsPA- The processor family is PA-RISC 8500.
RISC8500(145)
deviceFamilyIsPA- The processor family is PA-RISC 8000.
RISC8000(146)
deviceFamilyIsPAR The processor family is PA-RISC 7300LC.
ISC7300LC( 147)
deviceFamilyIsPA- The processor family is PA-RISC 7200.
RISC7200(148)
deviceFamilyIsPAR The processor family is PA-RISC 7100LC.
ISC7100LC( 149)
deviceFamilyIsPA- The processor family is PA-RISC 7100.
RISC7100(150)
deviceFamilyIsV3
0(160)
230
The processor family is V30.
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeon320 Xeon processor 3200 Series.
0(161)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeon300 processor 3000 Series.
0(162)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeon530 Xeon processor 5300 Series.
0(163)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeon510 processor 5100 Series.
0(164)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeon500 processor 5000 Series.
0(165)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeonLV( processor LV.
166)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeonUL processor ULV.
V(167)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeon710 processor 7100 Series.
0(168)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeon540 Xeon processor 5400 Series.
0(169)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeon(17 Xeon.
0)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeon520 processor 5200 Series.
0(171)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeon720 processor 7200 Series.
0(172)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeon730 Xeon processor 7300 Series.
0(173)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeon740 Xeon processor 7400 Series.
0(174)
deviceFamilyIsMul The processor family is Multi-Core Intel
tiCoreIntelXeon74 Xeon processor 7400 Series.
00(175)
deviceFamilyIsM1( The processor family is M1.
176)
231
deviceFamilyIsM2( The processor family is M2.
177)
deviceFamilyIsInt The processor family is Intel Pentium 4 HT
elPentium4HT
processor.
(179)
deviceFamilyIsAS4 The processor family is AS400.
00(180)
deviceFamilyIsAMD The processor family is AMD Athlon XP.
AthlonXP(182)
deviceFamilyIsAMD The processor family is AMD Athlon MP.
AthlonMP(183)
deviceFamilyIsAMD The processor family is AMD Duron.
Duron(184)
deviceFamilyIsInt The processor family is Intel Pentium M.
elPentiumM(185)
deviceFamilyIsInt The processor family is Intel Celeron D.
elCeleronD(186)
deviceFamilyIsInt The processor family is Intel Pentium D.
elPentiumD(187)
deviceFamilyIsInt The processor family is Intel Pentium
elPentiumExtreme( Processor Extreme Edition.
188)
deviceFamilyIsInt The processor family is Intel Core Solo
elCoreSolo (189) processor.
deviceFamilyIsInt The processor family is Intel Core 2
elCore2(190)
processor.
deviceFamilyIsInt The processor family is Intel Core 2 Duo
elCore2Duo (191) processor.
deviceFamilyIsInt The processor family is Intel Core2 Solo
elCore2Solo (192) processor.
deviceFamilyIsInt The processor family is Intel Core2 Extreme
elCore2Extreme(19 processor.
3)
deviceFamilyIsInt The processor family is Intel Core2 Quad
elCore2Quad (194) processor.
deviceFamilyIsInt The processor family is Intel Core2 Extreme
elCore2Extrem
mobile processor.
eMobile(195)
deviceFamilyIsInt The processor family is Intel Core2 Duo
elCore2DuoMob
mobile processor.
ile(196)
deviceFamilyIsInt The processor family is Intel Core2 Solo
elCore2SoloMo
mobile processor.
bile(197)
232
deviceFamilyIsInt The processor family is Intel Core i7
elCorei7(198)
processor.
deviceFamilyIsDua The processor family is Dual-Core Intel
lCoreIntelCel
Celeron Processor.
eron(199)
deviceFamilyIsIBM The processor family is IBM390.
390(200)
deviceFamilyIsG4( The processor family is G4.
201)
deviceFamilyIsG5( The processor family is G5.
202)
deviceFamilyIsESA The processor family is ESA/390 G6.
390G6(203)
deviceFamilyIszAr The processor family is z/Architectur base.
chitectur (204)
deviceFamilyIsInt The processor family is Intel Core i5
elCorei5(205)
processor.
deviceFamilyIsInt The processor family is Intel Core i3
elCorei3(206)
processor.
deviceFamilyIsVIA The processor family is VIA C7-M.
C7-M(210)
deviceFamilyIsVIA The processor family is family is VIA C7-D.
C7-D(211)
deviceFamilyIsVIA The processor family is VIA C7.
C7(212)
deviceFamilyIsVIA The processor family is VIA Eden.
Eden(213)
deviceFamilyIsMul The processor family is Multi-Core Intel
tiCoreIntelXe
Xeon processor.
on(214)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeo
processor 3xxx Series.
n3xxx(215)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeo
Xeon processor 3xxx Series.
n3xxx(216)
deviceFamilyIsVIA The processor family is VIA Nano.
Nano(217)
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeo
processor 5xxx Series.
n5xxx(218)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeo
Xeon processor 5xxx Series.
n5xxx(219)
233
deviceFamilyIsDua The processor family is Dual-Core Intel Xeon
lCoreIntelXeo
processor 7xxx Series.
n7xxx(221)
deviceFamilyIsQua The processor family is Quad-Core Intel
dCoreIntelXeo
Xeon processor 7xxx Series.
n7xxx(222)
deviceFamilyIsMul The processor family is Multi-Core Intel
tiCoreIntelXe
Xeon processor 7xxx Series.
on7xxx(223)
deviceFamilyIsMul The processor family is Multi-Core Intel
tiCoreIntelXe
Xeon processor 3400 Series.
on3400(224)
deviceFamilyIsEmb The processor family is Embedded AMD
eddedAMDOpert
Opteron Quad-Core.
onQuadCore(230)
deviceFamilyIsAMD The processor family is AMD Phenom TriplePhenomTripleC
Core.
ore(231)
deviceFamilyIsAMD The processor family is AMD Turion Ultra
TurionUltraDu
Dual-Core mobile processor.
alCoreMobile(232)
deviceFamilyIsAMD The processor family is AMD Turion DualTurionDualCor
Core mobile processor.
eMobile(233)
deviceFamilyIsAMD The processor family is AMD Athlon DualAthlonDualCor
Core.
e(234)
deviceFamilyIsAMD The processor family is AMD Sempron SI.
SempronSI (235)
deviceFamilyIsAMD The processor family is AMD Phenom II.
PhenomII(236)
deviceFamilyIsAMD The processor family is AMD Athlon II.
AthlonII(237)
deviceFamilyIsSix The processor family is Six-Core AMD
CoreAMDOptero
Opteron.
n(238)
deviceFamilyIsAMD The processor family is AMD Sempron M.
SempronM(239)
deviceFamilyIsi86 The processor family is i860.
0(250)
deviceFamilyIsi96 The processor family is i960.
0(251)
deviceFamilyIsAMD The processor family family is AMD Opteron
Opteron6200 (261) 6200 Series Processor.
234
deviceFamilyIsAMD The processor family family is AMD Opteron
Opteron4200 (61) 4200 Series Processor.
Table 884. Cache Device Type
Variable Name:DellCacheDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOthe
r(1)
System cache type is not one of the
following:
deviceTypeIsUnkno System cache type is unknown.
wn(2)
deviceTypeIsInstr System cache type is instruction.
uction(3)
deviceTypeIsData( System cache type is data.
4)
deviceTypeIsUnifi System cache type is both instruction and
ed(5)
data.
Table 885. Cache Device Level
Variable Name:DellCacheDeviceLevel
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceLevelIsOthe Device level is not one of the following:
r(1)
deviceLevelIsUnkn Device level is unknown.
own(2)
deviceLevelIsPrim Device level is primary.
ary(3)
deviceLevelIsSeco Device level is secondary.
ndary(4)
deviceLevelIsTert Device level is tertiary.
iary(5)
Table 886. Cache Device Write Policy
Variable Name:DellCacheDeviceWritePolicy
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceWritePolicy Device write policy is not one of the
IsOther(1)
following:
deviceWritePolicy Device write policy is unknown.
IsUnknown(2)
deviceWritePolicy Device write policy is write back.
IsWriteBack(3)
235
deviceWritePolicy Device write policy is write through.
IsWriteThrough(4)
deviceWritePolicy Device write policy varies by address.
IsVariesByAddres
s(5)
deviceWritePolicy Device write policy is determined by I/O
IsDeterminedByIO( query.
6)
Table 887. Cache Device Status State
Variable Name:DellCacheDeviceStatusState
Data Type:Integer
Possible Data Values
Meaning of Data Value
other(1)
Device state is not one of the following:
unknown(2)
Device state is unknown.
enabled(3)
Device is enabled.
userDisabled(4)
Device is disabled by the user.
biosDisabled(5)
Device basic input/output system (BIOS) is
disabled.
Table 888. Cache Device ECC Type
Variable Name:DellPointingDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOthe
r(1)
Device type is not one of the following:
deviceTypeIsUnkno Device type is unknown.
wn(2)
deviceTypeIsAMous Device type is a mouse.
e(3)
deviceTypeIsATrac Device type is a track ball.
kBall(4)
deviceTypeIsATrac Device type is a track point.
kPoint(5)
deviceTypeIsAGlid Device type is a glide point.
ePoint(6)
deviceTypeIsATouc Device type is a touch pad.
hPad(7)
Table 889. Cache Device Associativity
Variable Name:DellCacheDeviceAssociativity
Data Type:Integer
Possible Data Values
236
Meaning of Data Value
deviceAssociativi Device associativity is not one of the
tyIsOther(1)
following:
deviceAssociativi Device associativity is unknown.
tyIsUnknown(2)
deviceAssociativi Device is direct mapped.
tyIsDirectMapped(
3)
deviceAssociativi Device is two-way set associative.
tyIsTwoWaySetAsso
ciative(4)
deviceAssociativi Device is four-way set associative.
tyIsFourWaySetAss
o ciative(5)
deviceAssociativi Device is fully associative.
tyIsFullyAssociat
ive (6)
deviceAssociativi Device is eight-way set associative.
tyIsEightWaySetAs
so ciative(7)
deviceAssociativi Device is sixteen-way set associative.
tyIsSixteenWaySet
Associative(8)
deviceAssociativi Device is 12-way Set-Associative.
tyIs12WaySetAssoc
iative(9)
deviceAssociativi Device is 24-way Set-Associative.
tyIs24WaySetAssoc
iative(10)
deviceAssociativi Device is 32-way Set-Associative.
tyIs32WaySetAssoc
iative(11)
deviceAssociativi Device is 48-way Set-Associative.
tyIs48WaySetAssoc
iative(12)
deviceAssociativi Device is 64-way Set-Associative.
tyIs64WaySetAssoc
iative(13)
Table 890. Cache Device Location
Variable Name:DellCacheDeviceLocation
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceLocationIsO Device location is not one of the following:
ther(1)
deviceLocationIsU Device location is unknown.
nknown(2)
237
deviceLocationIsI Device location is internal.
nternal(3)
deviceLocationIsE Device location is external.
xternal(4)
Table 891. Cache Device Static Random-Access Memory (SRAM) Type
Variable Name:DellCacheDeviceSRAMType
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceSRAMTypeIsO Device SRAM type is not one of the
ther(1)
following:
deviceSRAMTypeIsU Device SRAM type is unknown.
nknown(2)
deviceSRAMTypeIsN Device SRAM type is nonburst.
onBurst(3)
deviceSRAMTypeIsB Device SRAM type is burst.
urst(4)
deviceSRAMTypeIsP Device SRAM type is pipeburst.
ipeBurst(5)
deviceSRAMTypeIsS Device SRAM type is synchronous.
ynchronous(6)
deviceSRAMTypeIsA Device SRAM type is asynchronous.
synchronous(7)
Table 892. Memory Device Type Form Factor
Variable Name:DellMemoryDeviceFormFactor
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceFormFactorI Device form factor is not one of the
sOther(1)
following:
deviceFormFactorI Device form factor is unknown.
sUnknown(2)
deviceFormFactorI Device form factor is SIMM.
sSIMM(3)
deviceFormFactorI Device form factor is SIP.
sSIP(4)
deviceFormFactorI Device form factor is a chip.
sAChip(5)
deviceFormFactorI Device form factor is DIP.
sDIP(6)
deviceFormFactorI Device form factor is ZIP.
sZIP(7)
238
deviceFormFactorI Device form factor is a proprietary card.
sAProprietaryCar
d(8)
deviceFormFactorI Device form factor is DIMM.
sDIMM(9)
deviceFormFactorI Device form factor is TSOP.
sTSOP(10)
deviceFormFactorI Device form factor is a row of chips.
sARowOfChips(11)
deviceFormFactorI Device form factor is RIMM.
sRIMM(12)
deviceFormFactorI Device form factor is SODIMM.
sSODIMM(13)
deviceFormFactorI Device form factor is SRIMM.
sSRIMM(14)
deviceFormFactorI Device form factor is FB-DIMM.
sFBDIMM(15)
Table 893. Memory Device Type
Variable Name:DellMemoryDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOthe
r(1)
Device type is not one of the following:
deviceTypeIsUnkno Device type is unknown.
wn(2)
deviceTypeIsDRAM( Device type is DRAM.
3)
deviceTypeIsEDRA
M(4)
Device type is EDRAM.
deviceTypeIsVRAM( Device type is VRAM.
5)
deviceTypeIsSRAM( Device type is SRAM.
6)
deviceTypeIsRAM(7 Device type is RAM.
)
deviceTypeIsROM(8 Device type is ROM.
)
deviceTypeIsFLAS
H(9)
Device type is FLASH.
deviceTypeIsEEPRO Device type is EEPROM.
M(10)
deviceTypeIsFEPRO Device type is FEPROM.
M(11)
239
deviceTypeIsEPRO
M(12)
Device type is EPROM.
deviceTypeIsCDRA
M(13)
Device type is CDRAM.
deviceTypeIs3DRA
M(14)
Device type is 3DRAM.
deviceTypeIsSDRA
M(15)
Device type is SDRAM.
deviceTypeIsSGRA
M(16)
Device type is SGRAM.
deviceTypeIsRDRA
M(17)
Device type is RDRAM.
deviceTypeIsDDR(1 Device type is DDR.
8)
deviceTypeIsDDR2( Device type is DDR2.
19)
deviceTypeIsDDR2F Device type is DDR2 FB-DIMM.
BDIMM(20)
deviceTypeIsDDR3( Device type is DDR3.
24)
deviceTypeIsFBD2( Device type is FBD2.
25)
Table 894. Memory Device Type Details
Variable Name:DellMemoryDeviceTypeDetails
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeDetailI The detailed device type is not one of the
sOther(2)
following:
deviceTypeDetailI The detailed device type is unknown.
sUnknown(4)
deviceTypeDetailI The detailed device type is fast paged.
sFastPaged (8)
deviceTypeDetailI The detailed device type is static column.
sStaticColum
n(16)
deviceTypeDetailI The detailed device type is pseudo-static.
sPseudoStati
c(32)
deviceTypeDetailI The detailed device type is RAMBUS.
sRAMBUS(64)
deviceTypeDetailI The detailed device type is synchronous.
sSynchronous
(128)
240
deviceTypeDetailI The detailed device type is CMOS.
sCMOS(256)
deviceTypeDetailI The detailed device type is EDO.
sEDO(512)
deviceTypeDetailI The detailed device type is Window DRAM.
sWindowDRAM
(1024)
deviceTypeDetailI The detailed device type is Cache DRAM.
sCacheDRAM (2048)
deviceTypeDetailI The detailed device type is Non-volatile.
sNonVolatile
(4096)
deviceTypeDetailI The detailed device type is registered.
sRegistered
(8192)
deviceTypeDetailI The detailed device type is nonregistered.
sNonRegister
ed(16384)
Table 895. Generic Device Type
Variable Name:DellGenericDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
deviceTypeIsOthe
r(1)
Device type is not one of the following:
deviceTypeIsUnkno Device type is unknown.
wn(2)
deviceTypeIsAVide Device type is a video.
oDevice(3)
deviceTypeIsASCSI Device type is a SCSI controller.
Controller(4)
deviceTypeIsAnEth Device type is Ethernet.
ernetDevice(5)
deviceTypeIsToken Device type is token ring.
RingDevice(6)
deviceTypeIsASoun Device type is sound.
dDevice(7)
Table 896. Memory Device Failure Modes
Variable Name:DellMemoryDeviceFailureModes
Data Type:Integer
NOTE: These values are bit masks, so combination values are
possible.
Possible Data Values
Meaning of Data Value
241
Memory device has no faults.
(0)
eccSingleBitCorre Memory device has exceeded the
ctionWarningRate( Correctable Memory Event warning rate.
1)
eccSingleBitCorre Memory device has exceeded the
ctionFailureRate( Correctable Memory Event failure rate.
2)
eccMultiBitFault( Memory device has encountered an
4)
Uncorrectable Memory Event.
eccSingleBitCorre Correctable Memory Event logging for
ctionLoggingDisab memory device has been disabled.
led (8)
deviceDisabledByS Memory device is disabled because of spare
pareActivation(16 memory activation.
)
Table 897. Network Device Connection Status
Variable Name:DellNetworkDeviceConnectionStatus
Data Type:Integer
Possible Data Values
Meaning of Data Value
unknown(0)
Unable to determine connection status.
connected(1)
Media reports that device is connected.
disconnected(2)
Media reports that device is disconnected.
driverBad(3)
Driver cannot be opened to determine
status.
driverDisabled(4) Driver is disabled.
hardwareInitalizi Hardware is initializing.
ng(10)
hardwareResettin
g(11)
Hardware is resetting.
hardwareClosing(1 Hardware is closing down.
2)
hardwareNotReady( Hardware is not ready.
13)
Table 898. Network Device Teaming Flags
Variable Name:DellNetworkDeviceTeamingFlags
Data Type:Integer
NOTE: These values are bit fields, so combination values are
possible.
Possible Data Values
Meaning of Data Value
undefined(0)
Teaming flags are undefined.
242
noTeam(1)
Device is not part of any team.
teamingEnabled(2) Teaming is enabled.
adapterFaultToler Adapter fault tolerance teaming mode.
anceMode(4)
loadBalancingMod
e(8)
Load balancing teaming mode.
Table 899. Network Device TOE Capability Flags
Variable Name:DellNetworkDeviceTOECapabilityFlags
Data Type:Integer
NOTE: These values are bit fields, so combination values are
possible.
Possible Data Values
Meaning of Data Value
none(0)
Querying for TOE capability is not
supported.
unknown(1)
Querying for TOE capability is supported but
query returned an error.
available(2)
Device has TOE capability.
notAvailable(4)
Device does not have TOE capability.
cannotBeDetermine Querying for TOE capability is supported but
d(8)
an error prevented querying.
driverNotRespondi Querying for TOE capability is supported but
ng(16)
driver did not respond to query.
Table 900. Network Device RDMA Capability Flags
Variable Name:DellNetworkDeviceRDMACapabilityFlags
Data Type:Integer
NOTE: These values are bit fields, so combination values are
possible.
Possible Data Values
Meaning of Data Value
none(0)
Querying for RDMA capability is not
supported.
unknown(1)
Querying for RDMA capability is supported
but query returned an error.
available(2)
Device has RDMA capability.
notAvailable(4)
Device does not have RDMA capability.
cannotBeDetermine Querying for RDMA capability is supported
d(8)
but an error prevented querying.
driverNotRespondi Querying for RDMA capability is supported
ng(16)
but driver did not respond to query.
243
Table 901. Network Device iSCSI Capability Flags
Variable Name:DellNetworkDeviceiSCSICapabilityFlags
Data Type:Integer
NOTE: These values are bit fields, so combination values are
possible.
Possible Data Values
Meaning of Data Value
none(0)
Querying for iSCSI capability is not
supported.
unknown(1)
Querying for iSCSI capability is supported
but query returned an error.
available(2)
Device has iSCSI capability.
notAvailable(4)
Device does not have iSCSI capability.
cannotBeDetermine Querying for iSCSI capability is supported
d(8)
but an error prevented querying.
driverNotRespondi Querying for iSCSI capability is supported
ng(16)
but driver did not respond to query.
Table 902. Managed System Services Device Type
Variable Name:DellManagedSystemServicesDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
baseDevice(0)
Device type is base device.
optionalDevice(1) Device type is optional device.
Table 903. SD Card Device Type
Variable Name:DellSDCardDeviceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
other(1)
Device type is other.
unknown(2)
Device type is unknown.
hypervisor(3)
Device type is Hypervisor.
vFlash(4)
Device type is Virtual Flash (vFlash.)
Table 904. SD Card Device Config Capabilities
Variable Name:DellSDCardDeviceConfigCapabilities
Data Type:Integer
NOTE: These values are bit fields, so combination values are
possible.
Possible Data Values
244
Meaning of Data Value
none(0)
SD card device has none of the following
capabilities.
sdCapable(1)
SD media can be enabled.
vFlashCapable(2)
Virtual Flash (vFlash) can be enabled.
Table 905. SD Card Device Config Settings
Variable Name:DellSDCardDeviceConfigSettings
Data Type:Integer
NOTE: These values are bit fields, so combination values are
possible.
Possible Data Values
Meaning of Data Value
none(0)
SD card device has none of the following
settings.
sdEnabled(1)
SD media is enabled.
vFlashEnabled(2)
Virtual Flash (vFlash) is enabled.
Table 906. SD Card Device Card State
Variable Name:DellSDCardDeviceCardState
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
SD card state is none of the following states.
present(1)
Device is present.
ipmiReady(2)
Device is IPMI ready.
fullReady(4)
Device is full ready.
offline(8)
Device is offline.
failed(16)
Device is failed.
active(32)
Device is active.
bootable(64)
Device is bootable.
writeProtect(128) Device is write-protected.
standby(256)
Device is in standby mode.
Table 907. SD Card Device Card Licensed
Variable Name:DellSDCardDeviceCardLicensed
Data Type:Integer
Possible Data Values
Meaning of Data Value
unlicensed(0)
SD card is not licensed by system vendor.
licensed(1)
SD card is licensed by system vendor.
ipmiReady(2)
Device is IPMI ready.
fullReady(4)
Device is full ready.
245
offline(8)
Device is offline.
failed(16)
Device is failed.
active(32)
Device is active.
bootable(64)
Device is bootable.
writeProtect(128) Device is write-protected.
standby(256)
Device is in standby mode.
Slot Group
The Slot Group provides information about the types of slots that your system supports. This
management information base (MIB) group also provides information about the voltages, capabilities,
states, and settings that are possible for these slots.
System Slot Group Table
The System Slot Group defines objects in the System Slot MIB table.
The following object sets up the System Slot Table:
Table 908. System Slot Table
Name
systemSlotTable
Object ID
1.3.6.1.4.1.674.10892.1.1200.10
Description
Defines the System Slot Table.
Syntax
IntegerSystemStateTableEntry
Access
Not accessible
Table 909. System Slot Table Entry
Name
systemSlotTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1
Description
Defines the System Slot Table entry.
Syntax
IntegerSystemSlotTableEntry
Access
Not accessible
Index
systemSlotchassisIndex
,
systemSlotIndex
Table 910. System Slot Chassis Index
Name
systemSlotchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.1
Description
Defines the index (one-based) of this chassis.
246
Syntax
DellObjectRange
Access
Read-only
Table 911. System Slot Index
Name
systemSlotIndex
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.2
Description
Defines the index (one-based) of the system slot in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 912. System Slot State Capabilities Unique
Name
systemSlotStateCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.3
Description
Defines the capabilities of the system slot.
Syntax
DellSystemSlotStateCapabilities (System Slot State Capabilities)
Access
Read-only
Table 913. System Slot State Settings Unique
Name
systemSlotStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.4
Description
Defines the state of the system slot.
Syntax
DellSystemSlotStateSettings (System Slot State Settings)
Access
Read-only
Table 914. System Slot Status
Name
systemSlotStatus
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.5
Description
Defines the status of the system slot.
Syntax
DellStatus
Access
Read-only
Table 915. System Slot Current Usage
Name
systemSlotCurrentUsage
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.6
Description
Defines the current usage of the system slot.
Syntax
DellStatus
247
Access
Read-only
Table 916. System Slot Type
Name
systemSlotType
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.7
Description
Defines the type of the system slot.
Syntax
DellSystemSlotType (System Slot Type)
Access
Read-only
Table 917. System Slot External Slot Name
Name
systemSlotSlotExternalSlotName
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.8
Description
Defines the external connector name of the system slot.
Syntax
DellString
Access
Read-only
Table 918. System Slot Length
Name
systemSlotLength
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.9
Description
Defines the length of the system slot.
Syntax
DellSystemSlotLength (System Slot Length)
Access
Read-only
Table 919. System Slot Slot ID
Name
systemSlotSlotID
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.10
Description
Defines the slot identification number of the system slot. A zero (0)
indicates that the slot is embedded on the motherboard.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 920. System Slot Category
Name
systemSlotCategory
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.11
Description
Defines the system slot category.
Syntax
DellUnsigned32BitRange
248
Access
Read-only
Table 921. System Slot Hot-Plug Bus Width
Name
systemSlotHotPlugBusWidth
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.12
Description
Defines the bus width of the hot-plug system slot.
Syntax
DellSystemSlotHotPlugBusWidth (Hot-Plug Bus Width)
Access
Read-only
Table 922. System Slot Hot-Plug Slot Speed
Name
systemSlotHotPlugSlotSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.13
Description
Defines the slot speed in megahertz of the hot-plug system slot. A zero
(0) indicates that the slot speed is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 923. System Slot Hot-Plug Adapter Speed
Name
systemSlotHotPlugAdapterSpeed
Object ID
1.3.6.1.4.1.674.10892.1.1200.10.1.14
Description
Defines the adapter speed in megahertz of the hot-plug system slot. A
zero (0) indicates that the slot speed is unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
System Slot Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 924. System Slot State Capabilities
Variable Name: DellSystemSlotStateCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
systemSlotHotPlugIsUnknown (1)
The system slot’s capabilities are unknown.
systemSlotHotPlugIsHotPlug
gableCapable(2)
The system slot supports hot-plug.
systemSlotHotPlugCanBePower edOn(4)
The system slot power (and corresponding lightemitting diode [LED]) can be powered on.
249
systemSlotHotPlugCanSignal Attention(8) The system slot attention state (and corresponding
LED) can be set.
systemSlotHotPlugCanSignal
PowerFault(16)
Power on fault (and corresponding LED) can be
detected due to a short or overcurrent.
systemSlotHotPlugCanSignal
AdapterPresent(32)
Adapter (card) present in slot (may not be
powered) can be detected.
systemSlotHotPlugCanSignal
PowerButtonPressed(64)
The system slot power button can be pressed to
signal a toggle of the power state.
canSupportAllHotPlugCapabi lities(126)
The system slot can support all hot-plug
capabilities.
systemSlotHotPlugIsUnknown (1)
The system slot’s capabilities are unknown.
systemSlotCanProvide5Volts (128)
The system slot can provide a 5-volt (V) supply.
systemSlotCanProvide3Point 3Volts(256)
The system slot can provide a 3.3-V supply.
systemSlotCanSignalIfShared (512)
The system slot’s opening, if shared with another
slot, can be detected.
systemSlotCanSupportCard16 (1024)
The system slot can support PC Card-16.
systemSlotCanSupportCardBus (2048)
The system slot can support CardBus.
systemSlotCanSupportZoomVid eo(4096)
The system slot can support Zoom Video.
systemSlotCanSupportModem
RingResume(8192)
The system slot can support modem ring resume.
systemSlotCanSupportPMESig nal(16384)
The system slot can support Power Management
Enable (PME#) signal.
canSupportAllSlotCapabilit ies(32640)
The system slot can support all slot capabilities.
Table 925. System Slot State Settings
Variable Name: DellSystemSlotStateSettings
Data Type: Integer
Possible Data Values
Meaning of Data Value
systemSlotHotPlugIsUnknown(1)
The system slot’s capabilities are unknown.
systemSlotHotPlugIsHotPluggable(2)
The system slot supports hot-plug.
systemSlotHotPlugIsPoweredOn(4)
The system slot power (and corresponding LED)
can be powered on.
systemSlotHotPlugIsAtAttention(8)
The system slot attention state (and corresponding
LED) can be set.
systemSlotHotPlugIsHotPluggable(2)
The system slot supports hot-plug.
systemSlotHotPlugIsPoweredOn(4)
The system slot power (and corresponding LED) is
on.
250
systemSlotHotPlugIsAtAttention(8)
The system slot attention state (and corresponding
LED) is on.
systemSlotHotPlugHasPowerFaulted (16)
Power on fault (and corresponding LED) was
detected due to a short or overcurrent.
systemSlotHotPlugAdapterIsPresent (32)
Adapter (card) present in slot (may not be
powered).
systemSlotHotPlugAdapterPresentAnd
PoweredOn(36)
Adapter (card) present in slot and powered.
systemSlotHotPlugPowerButtonPressed
(64)
The system slot power button pressed to signal a
toggle of the power state.
systemSlotProvides5Volts(128)
The system slot provides a 5-V supply.
systemSlotProvides3Point3Volts(256)
The system slot provides a 3.3-V supply.
systemSlotIsShared(512)
The slot’s opening is shared with another slot.
systemSlotSupportsCard16(1024)
The system slot supports PC Card-16.
systemSlotSupportsCardBus(2048)
The system slot supports CardBus.
systemSlotSupportsZoomVideo(4096)
The system slot supports zoom video.
systemSlotSupportsModemRingResume
(8192)
The system slot supports modem ring resume.
systemSlotSupportsPMESignal(16384)
The system slot supports power management
enable (PME#) signal.
supportsPMEand3P3Vand5VandHotPlugg
able(16770)
The system slot supports power management
enable.
supportsPMEand3P3Vand5VhasAdapterO
n(16804)
The system slot supports power management
event (PME), supplies 3.3 V, and supplies 5 V. The
adapter is on.
supportsPMEand3P3Vand5VhasAdapter
OnandisHotPluggable(16806)
The system slot supports PME, supplies 3.3 V, and
supplies 5 V. The adapter is on and the system slot
is hot pluggable.
supportsPMEand3P3VIsSharedand5Vhas
AdapterOnandisHotPluggable(17316)
The system slot supports PME, supplies 3.3 V,
supplies 5 V, and shares a slot opening. The
adapter is on and the system slot is hot pluggable.
Table 926. System Slot Type
Variable Name: DellSystemSlotType
Data Type: Integer
Possible Data Values
Meaning of Data Value
systemSlotIsOther(1)
The system slot type is not one of following:
systemSlotIsUnknown(2)
The system slot type is unknown.
251
systemSlotIsISA(3)
The system slot is Industry Standard Architecture
(ISA).
systemSlotIsMCA(4)
The system slot is Micro Channel Architecture
(MCA).
systemSlotIsEISA(5)
The system slot is Extended Industry Standard
Architecture (EISA).
systemSlotIsPCI(6)
The system slot is Peripheral Component
Interconnect (PCI).
systemSlotIsPCMCIA(7) .
The system slot is compliant with the Personal
Computer Memory Card International Association
(PCMCIA) standards
systemSlotIsVLVESA(8)
The system slot is Very Low Voltage Enterprise
System Architecture (VLVESA).
systemSlotIsProprietary(9)
The system slot is proprietary.
systemSlotIsProcessorCard(10)
The system slot is a processor card.
systemSlotIsProprietaryMemory(11)
The system slot is proprietary memory.
systemSlotIsIORiserCard(12)
The system slot is an I/O riser card.
systemSlotIsNuBUS(13)
The system slot is a NuBus.
systemSlotIsPCI66MHz(14) T
he system slot is a PCI66MHz.
systemSlotIsAGP(15)
The system slot is an Advanced Graphics Port
(AGP).
systemSlotIsAGP2X(16)
The system slot is an AGP 2x card.
systemSlotIsAGP4X(17)
The system slot is an AGP 4x card.
systemSlotIsPC98C20(18)
The system slot is a PC-98/C20.
systemSlotIsPC98C24(19)
The system slot is a PC-98/C24.
systemSlotIsPC98E(20)
The system slot type is PC-98/E.
systemSlotIsPC98LocalBus(21)
The system slot type is a PC-98 local bus.
systemSlotIsPC98Card(22)
The system slot type is a PC-98 card.
systemSlotIsPCIX(23)
The system slot type is a PCIX card.
systemSlotIsPCIExpress(24)
The system slot type is a PCI Express card.
systemSlotIsAGP8X(25)
The system slot type is an AGP 8x card.
systemSlotIsPCIExpressX1(166)
The system slot type is a PCI Express x1.
systemSlotIsPCIExpressX2(167)
The system slot type is a PCI Express x2.
systemSlotIsPCIExpressX4(168)
The system slot type is a PCI Express x4.
systemSlotIsPCIExpressX8(169)
The system slot type is a PCI Express x8.
systemSlotIsPCIExpressX16(170)
The system slot type is a PCI Express x16.
252
systemSlotIsPCIExpressGen2(171)
The system slot type is PCI Express Gen 2.
systemSlotIsPCIExpressGen2X1(172)
The system slot type is PCI Express Gen 2 x1.
systemSlotIsPCIExpressGen2X2(173) .
The system slot type is PCI Express Gen 2 x2
systemSlotIsPCIExpressGen2X4(174)
The system slot type is PCI Express Gen 2 x4.
systemSlotIsPCIExpressGen2X8(175)
The system slot type is PCI Express Gen 2 x8.
systemSlotIsPCIExpressGen2X16(176)
The system slot type is PCI Express Gen 2 x16.
Table 927. System Slot Usage
Variable Name: DellSystemSlotUsage
Data Type: Integer
Possible Data Values
Meaning of Data Value
systemSlotUsageIsOther(1)
The system slot usage is not one of following:
systemSlotUsageIsUnknown(2)
The system slot usage is unknown.
systemSlotUsageIsAvailable(3)
The system slot is available.
systemSlotUsageIsInUse(4)
The system slot is in use.
Table 928. System Slot Length
Variable Name: DellSystemSlotLength
Data Type: Integer
Possible Data Values
Meaning of Data Value
systemSlotLengthIsOther(1)
The system slot length is not one of following:
systemSlotLengthIsUnknown(2)
The system slot length is unknown.
systemSlotLengthIsShort(3)
The system slot length is short.
systemSlotLengthIsLong(4)
The system slot length is long.
Table 929. System Slot Category
Variable Name: DellSystemSlotCategory
Data Type: Integer
Possible Data Values
Meaning of Data Value
systemSlotCategoryIsOther(1)
The system slot category is not one of following:
systemSlotCategoryIsUnknown(2)
The system slot category is unknown.
systemSlotCategoryIsBusConnector(3)
The system slot is a bus connector.
systemSlotCategoryIsPCMCIA(4)
The system slot category is PCMCIA.
systemSlotCategoryIsMotherboard(5)
The system slot is a motherboard.
253
Table 930. Hot-Plug Bus Width
Variable Name: DellSystemSlotHotPlugBusWidth
Data Type: Integer
Possible Data Values
Meaning of Data Value
busWidthIsOther(1)
The system slot bus width is not one of following:
busWidthIsUnknown(2)
The system slot bus width is unknown.
busWidthIs8bits(3)
The system slot bus width is 8 bits.
busWidthIs16bits(4)
The system slot bus width is 16 bits.
busWidthIs32bits(5)
The system slot bus width is 32 bits.
busWidthIs64bits(6)
The system slot bus width is 64 bits.
busWidthIs128bits(7)
The system slot bus width is 128 bits.
busWidthIs1xOrx1(8)
The system slot bus width is 1x or x1.
busWidthIs2xOrx2(9)
The system slot bus width is 2x or x2.
busWidthIs4xOrx4(10)
The system slot bus width is 4x or x4.
busWidthIs8xOrx8(11)
The system slot bus width is 8x or x8.
busWidthIs12xOrx12(12)
The system slot bus width is 12x or x12.
busWidthIs16xOrx16(13)
The system slot bus width is 16x or x16.
busWidthIs32xOrx32(14)
The system slot bus width is 32x or x32.
NOTE: System slot bus width of type n bits are for parallel buses such as PCI.
NOTE: System slot bus width of type nx or xn are for serial buses such as PCI Express.
Memory Group
The Memory Group provides information about the physical memory in your system. Variables in this
group include error correction type, location, and different types of memory use, such as cache, flash,
system, video, and nonvolatile memory.
Physical Memory Tables
The following management information base (MIB) tables define the objects in the Memory Group:
•
Physical Memory Array Table
•
Physical Memory Array Mapped Table
•
Physical Memory Configuration Table
•
Physical Memory Logging Table
•
Redundant Memory Unit Table
•
Physical Memory Card Table
254
Physical Memory Array Table
The physical memory array is the entire physical memory of a system. The example that follows shows
variable values for a system that has one 128-megabyte (MB) dual in-line memory module (DIMM):
•
physicalMemoryArrayMaximumSize = 2,097,152 kilobytes (KB) or 2 gigabytes (GB)
•
physicalMemoryArrayTotalNumberSockets = 4 (the example system has four DIMM slots on the
motherboard)
•
physicalMemoryArrayInUseNumberSockets = 1 (there is only one DIMM installed)
The Rank of the DIMM are :
•
0 — Unknown
•
1 — Single
•
2 — Dual
•
4 — Quad
•
8 — Octal
•
16 — Hexa
The following object sets up the Physical Memory Array Table:
Table 931. Physical Memory Array Table
Name
physicalMemoryArrayTable
Object ID
1.3.6.1.4.1.674.10892.1.1300.10
Description
Defines the Physical Memory Array Table.
Syntax
PhysicalMemoryArrayTableEntry
Access
Not accessible
Table 932. Physical Memory Array Table Entry
Name
physicalMemoryArrayTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1
Description
Defines the Physical Memory Array Table entry.
Syntax
PhysicalMemoryArrayTableEntry
Access
Not accessible
Index
physicalMemoryArraychassisIndex
,
physicalMemoryArrayIndex
Table 933. Physical Memory Array Chassis Index
Name
physicalMemoryArraychassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.1
Description
Defines the index (one-based) of this chassis.
255
Syntax
DellObjectRange
Access
Read-only
Table 934. Physical Memory Array Index
Name
physicalMemoryArrayIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.2
Description
Defines the index (one-based) of the physical memory array in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 935. Physical Memory Array State Capabilities
Name
physicalMemoryArrayStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.3
Description
Defines the capabilities of the physical memory array.
Syntax
DellStateCapabilities
Access
Read-only
Table 936. Physical Memory Array State Settings
Name
physicalMemoryArrayStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.4
Description
Defines the state of the physical memory array.
Syntax
DellStateSettings
Access
Read-only
Table 937. Physical Memory Array Status
Name
physicalMemoryArrayStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.5
Description
Defines the status of the physical memory array.
Syntax
DellStatus
Access
Read-only
Table 938. Physical Memory Array Use
Name
physicalMemoryArrayUse
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.6
Description
Defines the use of the physical memory array.
256
Syntax
DellPhysicalMemoryArrayUse (See Physical Memory Array ECC Type
Definitions)
Access
Read-only
Table 939. Physical Memory Array Error Checking and Correcting (ECC) Type
Name
physicalMemoryArrayECCType
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.7
Description
Defines the ECC type used by the physical memory array.
Syntax
DellPhysicalMemoryArrayECCType (See Physical Memory Array ECC
Type Definitions)
Access
Read-only
Table 940. Physical Memory Array Location
Name
physicalMemoryArrayLocation
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.8
Description
Defines the location of the physical memory array.
Syntax
DellPhysicalMemoryArrayLocation (See Physical Memory Array Location)
Access
Read-only
Table 941. Physical Memory Array Maximum Size
NOTE: physicalMemoryArrayMaximumSize is no longer in use. This attribute is deprecated and
replaced by physicalMemoryArrayExtendedMaximumSize.
Name
physicalMemoryArrayMaximumSize
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.9
Description
Defines the size in KB of the physical memory array.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 942. Physical Memory Array Total Number Sockets
Name
physicalMemoryArrayTotalNumberSockets
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.10
Description
Defines the total number of memory sockets available for the physical
memory array.
Syntax
DellUnsigned32BitRange
Access
Read-only
257
Table 943. Physical Memory Array In Use Number Sockets
Name
physicalMemoryArrayInUseNumberSockets
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.11
Description
Defines the total number of memory sockets in use by the physical
memory array.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 944. Physical Memory Array ECC Error Nonrecoverable Threshold
Name
physicalMemoryArrayECCErrorNonRecoverbeThreshold
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.12
Description
Defines the value of the physical memory array Error Checking and
Correction (ECC) error nonrecoverable threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 945. Physical Memory Array ECC Error Critical Threshold
Name
physicalMemoryArrayECCErrorCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.13
Description
Defines the value of the physical memory array ECC error critical
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 946. Physical Memory Array ECC Error Noncritical Threshold
Name
physicalMemoryArrayECCErrorNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.14
Description
Defines the value of the physical memory array ECC error noncritical
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 947. Physical Memory Array Redundant Memory Unit Index Reference
Name
physicalMemoryArrayRedundantMemoryUnitIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.15
Description
Defines the index to the associated Redundant Memory Unit in this
chassis.
258
Syntax
DellObjectRange
Access
Read-only
Table 948. Physical Memory Array Extended Maximum Size
NOTE: This attribute replaces the physicalMemoryArrayMaximumSize.
Name
physicalMemoryArrayExtendedMaximumSize
Object ID
1.3.6.1.4.1.674.10892.1.1300.10.1.16
Description
This attribute defines the maximum size in Bytes of the physical memory
array.
Syntax
DellUnsigned64BitRange
Access
Read-only
Physical Memory Array Mapped Table
The physical memory array is divided into memory array mapped addresses.
The following object sets up the Physical Memory Array Mapped Table:
Table 949. Physical Memory Array Mapped Table
Name
physicalMemoryArrayMappedTable
Object ID
1.3.6.1.4.1.674.10892.1.1300.20
Description
Defines the Physical Memory Array Mapped Table.
Syntax
PhysicalMemoryArrayMappedTableEntry
Access
Not accessible
Table 950. Physical Memory Array Mapped Table Entry
Name
PhysicalMemoryArrayMappedTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1
Description
Defines the Physical Memory Array Mapped Table entry.
Syntax
PhysicalMemoryArrayMappedTableEntry
Access
Not accessible
Index
physicalMemoryArrayMappedchassisIndex
,
physicalMemoryArrayMappedIndex
Table 951. Physical Memory Array Mapped Chassis Index
Name
physicalMemoryArrayMappedchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.1
Description
Defines the index (one-based) of this chassis.
259
Syntax
DellObjectRange
Access
Read-only
Table 952. Physical Memory Array Mapped Index
Name
physicalMemoryArrayMappedIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.2
Description
Defines the index (one-based) of the memory array mapped address in
this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 953. Physical Memory Array Mapped State Capabilities
Name
physicalMemoryArrayMappedStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.3
Description
Defines the capabilities of the memory array mapped address.
Syntax
DellStateCapabilities
Access
Read-only
Table 954. Physical Memory Array Mapped State Settings
Name
physicalMemoryArrayMappedStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.4
Description
Defines the state of the memory array mapped address.
Syntax
DellStateSettings
Access
Read-only
Table 955. Physical Memory Array Mapped Status
Name
physicalMemoryArrayMappedStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.5
Description
Defines the status of the memory array mapped address.
Syntax
DellStatus
Access
Read-only
Table 956. Physical Memory Array Index Reference
Name
physicalMemoryArrayIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.6
Description
Defines the index to the associated physical memory array in this
chassis.
260
Syntax
DellObjectRange
Access
Read-only
Table 957. Physical Memory Array Mapped Starting Address
Name
physicalMemoryArrayMappedStartingAddress
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.7
Description
Defines the physical starting address in KB of the memory array mapped
address.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 958. Physical Memory Array Mapped Ending Address
Name
physicalMemoryArrayMappedEndingAddress
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.8
Description
Defines the physical ending address in KB of the memory array mapped
address.
Syntax
DellUnsigned64BitRange
Access
Read-only
Table 959. Physical Memory Array Mapped Partition Width
Name
physicalMemoryArrayMappedPartitionWidth
Object ID
1.3.6.1.4.1.674.10892.1.1300.20.1.9
Description
Defines the number of memory devices that form a single row in the
memory array mapped address. A zero (0) indicates that the number is
unknown.
Syntax
DellUnsigned32BitRange
Access
Read-only
Physical Memory Configuration Table
This table defines how the physical memory of a system chassis is set up, for example, which redundant
memory types are supported and whether redundant memory is active.
The following object sets up the Physical Memory Configuration Table:
Table 960. Physical Memory Configuration Table
Name
physicalMemoryConfigTable
Object ID
1.3.6.1.4.1.674.10892.1.1300.30
Description
Defines the Physical Memory Configuration Table.
Syntax
SEQUENCE OF PhysicalMemoryConfigTableEntry
261
Access
Not accessible
Table 961. Physical Memory Configuration Table Entry
Name
physicalMemoryConfigTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1
Description
Defines the Physical Memory Configuration Table entry.
Syntax
PhysicalMemoryConfigTableEntry
Access
Not accessible
Index
physicalMemoryConfigChassisIndex
,
physicalMemoryConfigIndex
Table 962. Physical Memory Configuration Chassis Index
Name
physicalMemoryConfigChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.1
Description
Defines the index (one-based) of the chassis associated with the
physical memory configuration.
Syntax
DellObjectRange
Access
Read-only
Table 963. Physical Memory Configuration Index
Name
physicalMemoryConfigIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.2
Description
Defines the index (one-based) of the physical memory configuration.
Syntax
DellObjectRange
Access
Read-only
Table 964. Physical Memory Configuration State Capabilities
Name
physicalMemoryConfigStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.3
Description
Defines the state capabilities of the physical memory configuration.
Syntax
DellPhysicalMemoryConfigStateCapabilities
Access
Read-only
262
Table 965. Physical Memory Configuration State Settings
Name
physicalMemoryConfigStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.4
Description
Defines the state settings of the physical memory configuration.
Syntax
DellPhysicalMemoryConfigStateSettings
Access
Read-only
Table 966. Physical Memory Configuration Status
Name
physicalMemoryConfigStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.5
Description
Defines the status of the physical memory configuration.
Syntax
DellStatus
Access
Read-only
Table 967. Physical Memory Configuration Redundant Capabilities
Name
physicalMemoryConfigRedundantCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.6
Description
Defines the redundant capabilities of the physical memory.
Syntax
DellPhysicalMemoryConfigRedundantCapabilities
Access
Read-only
Table 968. Physical Memory Configuration Redundant Settings
Name
physicalMemoryConfigRedundantSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.7
Description
Defines the redundant settings of the physical memory.
Syntax
DellPhysicalMemoryConfigRedundantSettings
Access
Read-only
Table 969. Physical Memory Configuration MOM Capabilities
Name
physicalMemoryConfigMOMCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.8
Description
Defines the Memory Operating Mode capabilities of the physical
memory.
Syntax
DellPhysicalMemoryConfigMOMCapabilities
Access
Read-only
263
Table 970. Physical Memory Configuration MOM Settings
Name
physicalMemoryConfigMOMSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.30.1.9
Description
Defines the Memory Operating Mode settings of the physical memory.
Syntax
DellPhysicalMemoryConfigMOMSettings
Access
Read-only
Physical Memory Logging Table
This table defines the conditions for logging system memory events.
The following object sets up the Physical Memory Logging Table:
Table 971. Physical Memory Logging Table
Name
physicalMemoryLoggingTable
Object ID
1.3.6.1.4.1.674.10892.1.1300.40
Description
Defines the Physical Memory Logging Table.
Syntax
SEQUENCE OF PhysicalMemoryLoggingTableEntry
Access
Not accessible
Table 972. Physical Memory Logging Table Entry
Name
physicalMemoryLoggingTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1300.40.1
Description
Defines the Physical Memory Logging Table entry.
Syntax
PhysicalMemoryLoggingTableEntry
Access
Not accessible
Index
physicalMemoryLoggingChassisIndex
,
physicalMemoryLoggingIndex
Table 973. Physical Memory Logging Chassis Index
Name
physicalMemoryLoggingChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.40.1.1
Description
Defines the index (one-based) of the chassis associated with the
physical memory logging.
Syntax
DellObjectRange
Access
Read-only
Table 974. Physical Memory Logging Index
Name
physicalMemoryLoggingIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.40.1.2
264
Description
Defines the index (one-based) of the physical memory logging.
Syntax
DellObjectRange
Access
Read-only
Table 975. Physical Memory Logging Capabilities
Name
physicalMemoryLoggingCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.40.1.3
Description
Defines the capabilities of the physical memory logging.
Syntax
DellPhysicalMemoryLoggingCapabilities
Access
Read-only
Table 976. Physical Memory Logging Settings
Name
physicalMemoryLoggingSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.40.1.4
Description
Defines the settings of the physical memory logging.
Syntax
DellPhysicalMemoryLoggingSettings
Access
Read-only
Table 977. Physical Memory Logging Status
Name
physicalMemoryLoggingStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.40.1.5
Description
Defines the status of the physical memory logging.
Syntax
DellStatus
Access
Read-only
Redundant Memory Unit Table
This table reports the status of redundant memory within a particular system chassis.
The following object sets up the Redundant Memory Unit Table:
Table 978. Redundant Memory Unit Table
Name
redundantMemoryUnitTable
Object ID
1.3.6.1.4.1.674.10892.1.1300.50
Description
Defines the Redundant Memory Unit Table.
Syntax
SEQUENCE OF RedundantMemoryUnitTableEntry
Access
Not accessible
Table 979. Redundant Memory Unit Table Entry
Name
redundantMemoryUnitTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1
265
Description
Defines the Redundant Memory Unit Table entry.
Syntax
RedundantMemoryUnitTableEntry
Access
Not accessible
Index
redundantMemoryUnitChassisIndex
,
redundantMemoryUnitIndex
Table 980. Redundant Memory Unit Chassis Index
Name
redundantMemoryUnitChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.1
Description
Defines the index (one-based) of the chassis associated with the
redundant memory unit.
Syntax
DellObjectRange
Access
Read-only
Table 981. Redundant Memory Unit Index
Name
redundantMemoryUnitIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.2
Description
Defines the index (one-based) of the redundant memory unit.
Syntax
DellObjectRange
Access
Read-only
Table 982. Redundant Memory Unit State Capabilities
Name
redundantMemoryUnitStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.3
Description
Defines the state capabilities of the redundant memory unit.
Syntax
DellStateCapabilities
Access
Read-only
Table 983. Redundant Memory Unit State Settings
Name
redundantMemoryUnitStatesettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.4
Description
Defines the state settings of the redundant memory unit.
Syntax
DellStateSettings
Access
Read-only
266
Table 984. Redundant Memory Unit Redundancy Status
Name
redundantMemoryUnitRedundancyStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.5
Description
Defines the redundancy status of the redundant memory unit.
Syntax
DellStatusRedundancy
Access
Read-only
Table 985. Redundant Memory Unit Name
Name
redundantMemoryUnitName
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.6
Description
Defines the name of the redundant memory unit.
Syntax
DellString
Access
Read-only
Table 986. Redundant Memory Unit Status
Name
redundantMemoryUnitStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.50.1.7
Description
Defines the status of the redundant memory unit.
Syntax
DellStatus
Access
Read-only
Physical Memory Card Table
This table defines the name of the memory card, the total number of device slots present on the memory
card, and the number of memory device slots in use on the memory card.
The following objects set up the Physical Memory Card Table:
Table 987. Physical Memory Card Table
Name
physicalMemoryCardTable
Object ID
1.3.6.1.4.1.674.10892.1.1300.60
Description
Defines the Physical Memory Card Table.
Syntax
SEQUENCE OF PhysicalMemoryCardTableEntry
Access
Not accessible
Table 988. Physical Memory Card Table Entry
Name
physicalMemoryCardTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1
Description
Defines the Physical Memory Card Table Entry.
267
Syntax
PhysicalMemoryCardTableEntry
Access
Not accessible
Index
physicalMemoryCardChassisIndex
,
physicalMemoryCardIndex
Table 989. Physical Memory Card Chassis Index
Name
physicalMemoryCardChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
Table 990. Physical Memory Card Index
Name
physicalMemoryCardIndex
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.2
Description
Defines the index (one-based) of the Physical Memory Card.
Syntax
DellObjectRange
Access
Read-only
Table 991. Physical Memory Card State Capabilities
Name
physicalMemoryCardStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.3
Description
Defines the state capabilities of the Physical Memory Card.
Syntax
DellStateCapabilities
Access
Read-only
Table 992. Physical Memory Card State Settings
Name
physicalMemoryCardStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.4
Description
Defines the state settings of the Physical Memory Card.
Syntax
DellStateSettings
Access
Read-only
268
Table 993. Physical Memory Card Status
Name
physicalMemoryCardStatus
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.5
Description
Defines the status of the Physical Memory Card.
Syntax
DellStatus
Access
Read-only
Table 994. Physical Memory Card Name
Name
physicalMemoryCardName
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.6
Description
Defines the name of the Physical Memory Card.
Syntax
DellString
Access
Read-only
Table 995. Physical Memory Card Total Number Sockets
Name
physicalMemoryCardTotalNumberSockets
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.7
Description
Defines the total number of memory sockets available on the Physical
Memory Card. 2,147,483,647 indicates an unknown number of sockets.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 996. Physical Memory Card In Use Number Sockets
Name
physicalMemoryCardInUseNumberSockets
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.8
Description
Defines the number of memory sockets in use on the Physical Memory
Card. Zero indicates that the Physical Memory Card is not installed or
has a configuration error.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 997. Physical Memory Card Physical Memory Array Index Reference
Name
physicalMemoryCardPhyMemArrayIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1300.60.1.9
Description
Defines the index (one-based) of the Physical Memory Array Table entry
for the physical memory array with the same chassis index that this
physical memory card is associated with.
269
Syntax
DellObjectRange
Access
Read-only
Memory Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 998. Physical Memory Array Location
Variable Name: DellPhysicalMemoryArrayLocation
Data Type: Integer
Possible Data Values
Meaning of Data Value
memoryArrayLocationIsOther(1)
The memory array location is not one of the
following:
memoryArrayUseIsUnknown(2)
The memory array use is unknown.
memoryArrayUseIsSystemMemory(3)
The memory array is system memory.
memoryArrayUseIsVideoMemory(4)
The memory array is video memory.
memoryArrayUseIsFLASHMemory(5)
The memory array is FLASH memory.
memoryArrayUseIsNonVolatileRAMMemory(6) The memory array is nonvolatile RAM.
memoryArrayUseIsCacheMemory(7)
The memory array is cache memory.
memoryArrayLocationIsPCMCIA(8)
The memory array location is a Personal Computer
Memory Card International Association (PCMCIA)
option card.
memoryArrayLocationIsProprietary(9)
The memory array location is a proprietary option
card.
memoryArrayLocationIsNUBUS(10)
The memory array location is a NuBus bus.
memoryArrayLocationIsPC98C20(11)
The memory array location is a PC-98/C20 option
card.
memoryArrayLocationIsPC98C24(12)
The memory array location is a PC-98/C24 option
card.
memoryArrayLocationIsPC98E(13)
The memory array location is a PC-98/E option
card.
memoryArrayLocationIsPC98LocalBus(14)
The memory array location is a PC-98/Local bus
option card.
memoryArrayLocationIsPC98Card(15)
The memory array location is a PC-98/Card slot
option card.
Table 999. Physical Memory Array ECC Type Definitions
Variable Name: DellPhysicalMemoryArrayECCType
Data Type: Integer
270
Possible Data Values
Meaning of Data Value
memoryArrayECCTypeIsOther(1)
There is not one of the following:
memoryArrayECCTypeIsUnknown(2)
The memory array ECC type is unknown.
memoryArrayECCTypeIsNone(3)
The memory array ECC type is none.
memoryArrayECCTypeIsParity(4)
The memory array ECC type is parity.
memoryArrayECCTypeIsSingleBitECC(5)
The memory array ECC type is Correctable
Memory Event ECC.
memoryArrayECCTypeIsMultiBitECC(6)
The memory array ECC type is Uncorrectable
Memory Event ECC.
memoryArrayECCTypeIsCRC(7)
The memory array ECC type is CRC.
Table 1000. Physical Memory Configuration State Capabilities
Variable Name: DellPhysicalMemoryConfigStateCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
If set to 0 (zero)
There are no state capabilities.
unknownCapabilities(1)
State capabilities are unknown.
enableCapable(2)
Object enable/disable is supported.
notReadyCapable(4)
Object not ready is supported.
Table 1001. Physical Memory Configuration State Settings
Variable Name: DellPhysicalMemoryConfigStateSettings
Data Type: Integer
Possible Data Values
Meaning of Data Value
If set to 0 (zero)
There are no state settings.
unknown(1)
State settings are unknown.
enabled(2)
Object is disabled (offline) 0, or enabled (online) 1.
notReady(4)
Object not ready.
redundantMemoryIsActive(8)
Redundant memory is active (in use).
enabledAndRedundantMemoryIsActive(10)
Redundant memory is enabled and in use.
Table 1002. Physical Memory Configuration Redundant Capabilities
Variable Name: DellPhysicalMemoryConfigRedundantCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
271
If set to 0 (zero)
There are no redundant memory capabilities.
unknownCapabilities(1)
Redundant capabilities are unknown.
The redundant capabilities are:
spareCapable(2)
Spare redundant memory feature is supported.
mirrorCapable(4)
Mirror redundant memory feature is supported.
spareAndMirrorCapable(6)
Spare and mirror redundant memory features are
supported.
raidCapable(8)
Redundant Array of Independent disks (RAID)
redundant memory feature is supported.
dddcCapable(16)
DDDC redundancy is supported.
Table 1003. Physical Memory Configuration Redundant Settings
Variable Name: DellPhysicalMemoryConfigRedundantSettings
Data Type: Integer
Possible Data Values
Meaning of Data Value
If set to 0 (zero)
There are no redundant memory settings enabled.
unknown(1)
Redundant settings are unknown.
The following redundant settings are mutually exclusive:
spareEnabled(2)
Spare redundant memory feature is enabled.
mirrorEnabled(4)
Mirror redundant memory feature is enabled.
raidEnabled(8)
RAID redundant memory feature is enabled.
dddcCapable(16)
DDDC redundancy is enabled.
Table 1004. Physical Memory Logging Capabilities
Variable Name: DellPhysicalMemoryLoggingCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
If set to 0 (zero)
There are no logging capabilities.
unknown Capabilities(1)
Logging capabilities are unknown.
The logging capabilities are:
enableCapable(2)
Logging enable/disable using Simple Network
Management Protocol (SNMP) is supported.
Table 1005. Physical Memory Logging Settings
Variable Name: DellPhysicalMemoryLoggingSettings
Data Type: Integer
Possible Data Values
272
Meaning of Data Value
If set to 0 (zero)
There are no logging settings enabled. unknown
Capabilities(1)
Logging capabilities are unknown.
The logging settings are:
enabled(2)
Logging is disabled (0), or enabled (1).
BIOS Setup Control Group
Basic Input/Output System (BIOS) Setup Control Group variables provide information about the functions
that the BIOS performs in your system. This management information base (MIB) group includes variables
for the boot sequence, speakers, diskettes, ports, network interface controllers (NICs), and the Wakeup
on local area network (LAN) feature.
BIOS Setup Control Group Tables
The MIB tables in this group define the BIOS control of devices and controller cards that are typically
present in a system.
•
BIOS Setup Control Table
•
SCSI Control Table
•
Parallel Port Control Table
•
Serial Port Control Table
•
USB Control Table
•
IDE Control Table
•
Diskette Control Table
•
Network Interface Control Table
The following MIB table in the BIOS Setup Control Group is supported on Dell PowerEdge xx2x (12G)
systems:
•
BIOS Setting Table
BIOS Setup Control Group Tables
Table 1006. BIOS Setup Control Table
Name
biosSetUpControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.10
Description
Defines the set of single devices in a chassis controlled by the BIOS.
Syntax
BiosSetUpControlTableEntry
Access
Not accessible
Table 1007. BIOS Setup Control Table Entry
Name
biosSetUpControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1
Description
Defines the BIOS Control Device Table entry.
273
Syntax
BiosSetUpControlTableEntry
Access
Not accessible
Index
biosSetUpControlchassisIndex
Table 1008. BIOS Setup Control Chassis Index
Name
biosSetUpControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1009. BIOS Setup Control (BSUC) Pointing Device Control Capabilities
Name
bSUCpointingDeviceControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.2
Description
Defines the capabilities of the pointing device.
Syntax
DellStateCapabilities
Access
Read-only
Table 1010. BIOS Setup Control Pointing Device Control Settings
Name
bSUCpointingDeviceControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.3
Description
Defines the state of the pointing device.
Syntax
DellStateSettings
Access
Read-only
Table 1011. BIOS Setup Control Pointing Device Control Status
Name
bSUCpointingDeviceControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.4
Description
Defines the status of the pointing device.
Syntax
DellStatus
Access
Read-only
Table 1012. BIOS Setup Control Pointing Device Control Name
Name
bSUCpointingDeviceControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.5
Description
Defines the setup BIOS name of the pointing device.
274
Syntax
DellString
Access
Read-only
Table 1013. BIOS Setup Control Numeric Lock Control Capabilities
Name
bSUCnumLockControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.6
Description
Defines the capabilities of the numeric lock.
Syntax
DellStateCapabilities
Access
Read-only
Table 1014. BIOS Setup Control Numeric Lock Control Settings
Name
bSUCnumLockControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.7
Description
Defines the state of the numeric lock.
Syntax
DellStateSettings
Access
Read-only
Table 1015. BIOS Setup Control Numeric Lock Control Status
Name
bSUCnumLockControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.8
Description
Defines the status of the numeric lock.
Syntax
DellStatus
Access
Read-only
Table 1016. BIOS Setup Control Numeric Lock Control Name
Name
bSUCnumLockControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.9
Description
Defines the setup BIOS name of the numeric lock.
Syntax
DellString
Access
Read-only
Table 1017. BIOS Setup Control Processor Serial Number Control Capabilities
Name
bSUCprocessorSerialNumberControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.10
Description
Defines if the processor serial number can be returned.
Syntax
DellStateCapabilities
275
Access
Read-only
Table 1018. BIOS Setup Control Processor Serial Number Control Settings
Name
bSUCprocessorSerialNumberControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.11
Description
Defines the state of the processor serial number.
Syntax
DellStateSettings
Access
Read-only
Table 1019. BIOS Setup Control Processor Serial Number Control Status
Name
bSUCprocessorSerialNumberControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.12
Description
Defines the status of the processor serial number.
Syntax
DellStatus
Access
Read-only
Table 1020. BIOS Setup Control Processor Serial Number Control Name
Name
bSUCprocessorSerialNumberControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.13
Description
Defines the setup BIOS name of the processor serial number.
Syntax
DellString
Access
Read-only
Table 1021. BIOS Setup Control Speaker Control Capabilities Unique
Name
bSUCspeakerControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.14
Description
Defines the capabilities of the speaker control.
Syntax
DellSpeakerControlCapabilitiesUnique (See Speaker Control Capabilities
Unique)
Access
Read-only
Table 1022. BIOS Setup Control Speaker Control Settings Unique
Name
bSUCspeakerControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.15
Description
Defines the settings available for speaker control.
Syntax
DellSpeakerControlSettingsUnique (See Speaker Control Settings
Unique)
276
Access
Read-only
Table 1023. BIOS Setup Control Speaker Control Status
Name
bSUCspeakerControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.16
Description
Defines the status of speaker control.
Syntax
DellStatus
Access
Read-only
Table 1024. BIOS Setup Control Speaker Control Name
Name
bSUCspeakerControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.17
Description
Defines the setup BIOS name of the speaker control.
Syntax
DellString
Access
Read-only
Table 1025. BIOS Setup Control NIF Wakeup on LAN Control Capabilities Unique
Name
bSUCnIFwakeonLanControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.18
Description
Defines the defines the capabilities of the network interface function
(NIF) Wakeup on LAN.
Syntax
DellNIFwakeonLanControlCapabilitiesUnique (See Network Interface
(NIF) Wakeup on LAN Capabilities Unique)
Access
Read-only
Table 1026. BIOS Setup Control NIF Wakeup on LAN Control Settings Unique
Name
bSUCnIFwakeonLanControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.19
Description
Defines the state of the NIF Wakeup on LAN.
Syntax
DellNIFwakeonLanControlSettingsUnique (See NIF Wakeup on LAN
Control Settings Unique)
Access
Read-only
Table 1027. BIOS Setup Control NIF Wakeup on LAN Control Status
Name
bSUCnIFwakeonLanControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.20
Description
Defines the status of the NIF Wakeup on LAN.
277
Syntax
DellStatus
Access
Read-only
Table 1028. BIOS Setup Control NIF Wakeup on LAN Control Name
Name
bSUCnIFwakeonLanControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.21
Description
Defines the setup BIOS name of the NIF Wakeup on LAN.
Syntax
DellString
Access
Read-only
Table 1029. BIOS Setup Control Boot Sequence Control Capabilities Unique
Name
bSUCbootSequenceControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.22
Description
Defines the capabilities of the boot sequence.
Syntax
DellBootSequenceControlCapabilitiesUnique (See Boot Sequence
Control Capabilities Unique)
Access
Read-only
Table 1030. BIOS Setup Control Boot Sequence Control Settings Unique
Name
DellBootSequenceControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.23
Description
Defines the state of the boot sequence.
Syntax
DellBootSequenceControlSettingsUnique (See Boot Sequence Control
Settings Unique)
Access
Read-only
Table 1031. BIOS Setup Control Boot Sequence Control Status
Name
bSUCbootSequenceControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.24
Description
Defines the status of the boot sequence.
Syntax
DellStatus
Access
Read-only
Table 1032. BIOS Setup Control Boot Sequence Control Name
Name
bSUCbootSequenceControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.25
Description
Defines the control name of the boot sequence.
278
Syntax
DellString
Access
Read-only
Table 1033. BIOS Setup Control Administrator Password Control Capabilities Unique
Name
bSUCadministratorPasswordControlCapabilities Unique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.26
Description
Defines the capabilities of the administrator password control.
Syntax
DellBIOSPasswordControlCapabilitiesUnique
Access
Read-only
Table 1034. BIOS Setup Control Administrator Password Control Settings Unique
Name
bSUCadministratorPasswordControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.27
Description
Defines the settings for administrator password control.
Syntax
DellBIOSPasswordControlSettingsUnique (See BIOS Password Control
Settings Unique)
Access
Read-only
Table 1035. BIOS Setup Control Administrator Password Control Status
Name
bSUCadministratorPasswordControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.28
Description
Defines the status for administrator password control.
Syntax
DellStatus
Access
Read-only
Table 1036. BIOS Setup Control Administrator Password Verify Name
Name
bSUCadministratorPasswordVerifyName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.29
Description
Defines the setup BIOS name for the current administrator password.
Syntax
DellString
Access
Read-only
Table 1037. BIOS Setup Control Administrator Password New Password Name
Name
bSUCadministratorPasswordNewPasswordName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.30
Description
Defines the setup BIOS name of the new administrator password. To set
a new administrator password, you must have successfully set the
279
current administrator password immediately preceding this password
change.
Syntax
DellString
Access
Read-only
Table 1038. BIOS Setup Control User Password Control Capabilities Unique
Name
bSUCuserPasswordControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.31
Description
Defines the capabilities of user password control.
Syntax
DellBIOSPasswordControlCapabilitiesUnique
Access
Read-only
Table 1039. BIOS Setup Control User Password Control Settings Unique
Name
bSUCuserPasswordControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.32
Description
Defines the control settings for user password control.
Syntax
DellBIOSPasswordControlSettingsUnique (See BIOS Password Control
Settings )
Access
Read-Only
Table 1040. BIOS Setup Control User Password Control Status
Name
bSUCuserPasswordControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.33
Description
Defines the status of the user password control.
Syntax
DellStatus
Access
Read-only
Table 1041. BIOS Setup Control User Password Verify Name
Name
bSUCuserPasswordVerifyName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.34
Description
Defines the setup BIOS name of the current user password.
Syntax
DellString
Access
Read-Only
Table 1042. BIOS Setup Control User Password New Password Name
Name
bSUCuserPasswordNewPasswordName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.35
280
Description
Defines the setup BIOS name of the new user password. To set a new
user password, a you must have successfully set the current user
password immediately preceding this password change.
Syntax
DellString
Access
Read-Only
Table 1043. BIOS Setup Control TPM Security Control Capabilities
Name
bSUCtpmSecurityControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.36
Description
Defines the BIOS setup control capabilities of Trusted Platform Module
(TPM) security.
Syntax
DellTPMSecurityControlCapabilities
Access
Read-only
Table 1044. BIOS Setup Control TPM Security Control Setting
Name
bSUCtpmSecurityControlSetting
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.37
Description
Defines the BIOS setup control setting of Trusted Platform Module
(TPM) security.
Syntax
DellTPMSecurityControlSetting
Access
Read-only
Table 1045. BIOS Setup Control TPM Security Control Status
Name
bSUCtpmSecurityControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.38
Description
Defines the BIOS setup control status of Trusted Platform Module (TPM)
security.
Syntax
DellStatus
Access
Read-only
Table 1046. BIOS Setup Control TPM Security Control Name
Name
bSUCtpmSecurityControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.10.1.39
Description
Defines the BIOS setup control name of Trusted Platform Module (TPM)
security.
Syntax
DellString
Access
Read-only
281
SCSI Control Table
Table 1047. SCSI Control Table
Name
sCSIControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.20
Description
Defines the Small Computer System Interface (SCSI) Control Table.
Syntax
SCSIControlTableEntry
Access
Not accessible
Table 1048. SCSI Control Table Entry
Name
sCSIControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1
Description x
Defines the SCSI Control Table entry.
Syntax
SCSIControlTableEntry
Access
Not accessible
Index
sCSIControlchassisIndex
,
sCSIControlIndex
Table 1049. SCSI Control Chassis Index
Name
sCSIControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1050. SCSI Control Index
Name
sCSIControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1.2
Description
Defines the index (one-based) of the SCSI controller in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1051. SCSI Control Capabilities
Name
sCSIControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1.3
Description
Defines the capabilities of the SCSI controller.
Syntax
DellStateCapabilities
282
Access
Read-only
Table 1052. SCSI Control Settings
Name
sCSIControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1.4
Description
Defines the state of the SCSI controller.
Syntax
DellStateSettings
Access
Read-only
Table 1053. SCSI Control Status
Name
sCSIControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1.5
Description
Defines the status of the SCSI controller.
Syntax
DellStatus
Access
Read-only
Table 1054. SCSI Control Name
Name
sCSIControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.20.1.6
Description
Defines the setup BIOS name of the SCSI controller.
Syntax
DellString
Access
Read-only
Parallel Port Control Table
Table 1055. Parallel Port Control Table
Name
parallelPortControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.30
Description
Defines the Parallel Port Control Table.
Syntax
ParallelPortControlTableEntry
Access
Not accessible
Table 1056. Parallel Port Control Table Entry
Name
parallelPortControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1
Description
Defines the Parallel Port Control Table entry.
Syntax
ParallelPortControlTableEntry
Access
Not accessible
Index
parallelPortControlchassisIndex
283
,
parallelPortControlIndex
Table 1057. Parallel Port Control Chassis Index
Name
parallelPortControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1058. Parallel Port Control Index
Name
parallelPortControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.2
Description
Defines the index (one-based) of the parallel port in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1059. Parallel Port Control Capabilities Unique
Name
parallelPortControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.3
Description
Defines the capabilities of the parallel port.
Syntax
DellParallelPortControlCapabilitiesUnique (See Parallel Port Control
Capabilities)
Access
Read-only
Table 1060. Parallel Port Control Settings Unique
Name
parallelPortControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.4
Description
Defines the state of the parallel port.
Syntax
DellParallelPortControlSettingsUnique (See Parallel Port Control
Settings)
Access
Read-only
Table 1061. Parallel Port Control Status
Name
parallelPortControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.5
Description
Defines the status of the parallel port.
Syntax
DellStatus
284
Access
Read-only
Table 1062. Parallel Port Control Name
Name
parallelPortControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.6
Description
Defines the setup BIOS name of the parallel port.
Syntax
DellString
Access
Read-only
Table 1063. Parallel Port Control Mode Capabilities Unique
Name
parallelPortControlModeCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.7
Description
Defines the mode capabilities of the parallel port.
Syntax
DellParallelPortControlModeCapabilitiesUnique
Access
Read-only
Table 1064. Parallel Port Control Mode Settings Unique
Name
parallelPortControlModeSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.30.1.8
Description
Defines the mode settings of the parallel port.
Syntax
DellParallelPortControlModeSettingsUnique (See Parallel Port Control
Mode Settings)
Access
Read-only
Serial Port Control Table
Table 1065. Serial Port Control Table
Name
serialPortControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.40
Description
Defines the Serial Port Control Table.
Syntax
SerialPortControlTableEntry
Access
Not accessible
Table 1066. Serial Port Control Table Entry
Name
serialPortControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1
Description
Defines the Serial Port Control Table entry.
Syntax
SerialPortControlTableEntry
Access
Not accessible
Index
serialPortControlchassisIndex
285
,
serialPortControlIndex
Table 1067. Serial Port Control Chassis Index
Name
serialPortControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1.1
Description
Defines index (one-based) of this chassis.
Syntax
DellObjectRange
Access
read-only
Table 1068. Serial Port Control Index
Name
serialPortControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1.2
Description
Defines the index (one-based) of the serial port in this chassis.
Syntax
DellObjectRange
Access
read-only
Table 1069. Serial Port Control Capabilities Unique
Name
serialPortControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1.3
Description
Defines the capabilities of the serial port.
Syntax
DellSerialPortControlCapabilitiesUnique (See Serial Port Control
Capabilities)
Access
Read-only
Table 1070. Serial Port Control Settings Unique
Name
serialPortControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1.4
Description
Defines the settings of the serial port.
Syntax
DellSerialPortControlSettingsUnique (See Serial Port Control Settings)
Access
Read-only
Table 1071. Serial Port Control Status
Name
serialPortControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1.5
Description
Defines the status of the serial port.
Syntax
DellStatus
Access
Read-only
286
Table 1072. Serial Port Control Name
Name
serialPortControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.40.1.6
Description
Defines the setup BIOS name of the serial port.
Syntax
DellString
Access
Read-only
USB Control Table
These objects enable you to track the attributes of your Universal Serial Bus (USB).
Table 1073. USB Control Table
Name
usbControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.50
Description
Defines the USB Table.
Syntax
UsbControlTableEntry
Access
Not accessible
Table 1074. USB Control Table Entry
Name
usbControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1
Description
Defines the USB Table entry.
Syntax
UsbControlTableEntry
Access
Not accessible
Index
usbControlchassisIndex
,
usbControlIndex
Table 1075. USB Control Chassis Index
Name
usbControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1.1
Description
Defines index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1076. USB Control Index
Name
usbControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1.2
Description
Defines the index (one-based) of the USB in this chassis.
Syntax
DellObjectRange
287
Access
Read-only
Table 1077. USB Control Capabilities
Name
usbControlCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1.3
Description
Defines the capabilities of the USB.
Syntax
DellStateCapabilities
Access
Read-only
Table 1078. USB Control Settings
Name
usbControlSettings
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1.4
Description
Defines the control settings for the USB.
Syntax
DellStateSettings
Access
Read-only
Table 1079. USB Control Status
Name
usbControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1.5
Description
Defines the status of the USB.
Syntax
DellStatus
Access
Read-only
Table 1080. USB Control Name
Name
usbControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.50.1.6
Description
Defines the setup BIOS name of the USB.
Syntax
DellString
Access
Read-only
IDE Control Table
These objects enable you to track the attributes of Integrated Device Electronics (IDE) controller cards in
your system.
Table 1081. IDE Control Table
Name
ideControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.60
Description
Defines the IDE Control Table.
Syntax
IdeControlTableEntry
288
Access
Not accessible
Table 1082. IDE Control Table Entry
Name
ideControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1
Description
Defines the IDE Control Table entry.
Syntax
IdeControlTableEntry
Access
Not accessible
Index
ideControlchassisIndex
,
ideControlIndex
Table 1083. IDE Control Chassis Index
Name
ideControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1084. IDE Control Index
Name
ideControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1.2
Description
Defines the index (one-based) of the IDE controller in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1085. IDE Control Capabilities Unique
Name
ideControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1.3
Description
Defines the capabilities of the IDE controller.
Syntax
DellideControlCapabilitiesUnique (See IDE Control Capabilities)
Access
Read-only
Table 1086. IDE Control Settings Unique
Name
ideControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1.4
Description
Defines the settings for the IDE controller.
Syntax
DellideControlCapabilitiesUnique (See IDE Control Capabilities)
289
Access
Read-only
Table 1087. IDE Control Status
Name
ideControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1.5
Description
Defines the status for the IDE controller.
Syntax
DellStatus
Access
Read-only
Table 1088. IDE Control Name
Name
ideControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.60.1.6
Description
Defines the setup BIOS name for the IDE controller.
Syntax
DellStatus
Access
Read-only
Diskette Control Table
Table 1089. Diskette Control Table
Name
disketteControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.70
Description
Defines the Diskette Control Table.
Syntax
DisketteControlTableEntry
Access
Not accessible
Table 1090. Diskette Control Table Entry
Name
disketteControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1
Description
Defines the Diskette Control Table entry.
Syntax
DellStatus
Access
Not accessible
Index
disketteControlchassisIndex
,
disketteControlIndex
Table 1091. Diskette Control Chassis Index
Name
disketteControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
290
Access
Read-only
Table 1092. Diskette Control Index
Name
disketteControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1.2
Description
Defines the index of the diskette controllers in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1093. Diskette Control Capabilities Unique
Name
disketteControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1.3
Description
Defines the capabilities of the diskette controller.
Syntax
DellDisketteControlCapabilitiesUnique
Access
Read-only
Table 1094. Diskette Control Settings Unique
Name
disketteControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1.4
Description
Defines the control settings for the diskette controller.
Syntax
DellDisketteControlSettingsUnique (See Diskette Control Settings)
Access
Read-only
Table 1095. Diskette Control Status
Name
disketteControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1.5
Description
Defines the status of the diskette controller.
Syntax
DellStatus
Access
Read-only
Table 1096. Diskette Control Name
Name
disketteControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.70.1.6
Description
Defines the setup BIOS name of the diskette controller.
Syntax
DellString
Access
Read-only
Network Interface Control Table
These MIB objects enable you to track the attributes of the NIC card for your system.
291
Table 1097. Network Interface Control Table
Name
networkInterfaceControlTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.80
Description
Defines the Network Interface Control Table.
Syntax
NetworkInterfaceControlTableEntry
Access
Not accessible
Table 1098. Network Interface Control Table Entry
Name
networkInterfaceControlTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1
Description
Defines the Network Interface Control Table entry.
Syntax
NetworkInterfaceControlTableEntry
Access
Not accessible
Index
networkInterfaceControlchassisIndex
,
networkInterfaceControlIndex
Table 1099. Network Interface Control Chassis Index
Name
networkInterfaceControlchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1100. Network Interface Control Index
Name
networkInterfaceControlIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1.2
Description
Defines the index (one-based) of the network interface controller in this
chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1101. Network Interface Control Capabilities Unique
Name
networkInterfaceControlCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1.3
Description
Defines the capabilities of the NIC.
Syntax
DellNetworkInterfaceControlCapabilitiesUnique (See Network Interface
Control Capabilities)
292
Access
Read-only
Table 1102. Network Interface Control Settings Unique
Name
networkInterfaceControlSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1.4
Description
Defines the control settings for the NIC.
Syntax
DellNetworkInterfaceControlSettingsUnique (See Network Interface
Control Settings)
Access
Read-only
Table 1103. Network Interface Control Status
Name
networkInterfaceControlStatus
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1.5
Description
Defines the status of the NIC.
Syntax
DellStatus
Access
Read-only
Table 1104. Network Interface Control Name
Name
networkInterfaceControlName
Object ID
1.3.6.1.4.1.674.10892.1.1400.80.1.6
Description
Defines the setup BIOS name of the NIC.
Syntax
DellString
Access
Read-only
BIOS Setting Table
These MIB objects enable you to track the BIOS settings for your system.
NOTE: These MIB objects are supported on Dell PowerEdge xx2x systems.
Table 1105. BIOS Setting Table
Name
biosSettingTable
Object ID
1.3.6.1.4.1.674.10892.1.1400.90
Description
Defines the BIOS Setting Table.
Syntax
SEQUENCE OF BiosSettingTableEntry
Access
Not accessible
Table 1106. BIOS Setting Table Entry
Name
biosSettingTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1
Description
Defines the BIOS Setting Table Entry.
293
Syntax
BiosSettingTableEntry
Access
Not accessible
Index
biosSettingChassisIndex
,
biosSettingIndex
Table 1107. BIOS Setting Chassis Index
Name
biosSettingChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.1
Description
Defines the index (one based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1108. BIOS Setting Index
Name
biosSettingIndex
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.2
Description
Defines the index (one based) of the BIOS setting.
Syntax
DellObjectRange
Access
Read-only
Table 1109. BIOS Setting Name
Name
biosSettingName
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.3
Description
Defines the name of the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1110. BIOS Setting Display Name
Name
biosSettingDisplayName
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.4
Description
Defines the display name of the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1111. BIOS Setting Value Type
Name
biosSettingValueType
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.5
Description
Defines the type of the BIOS setting value.
294
Syntax
DellBIOSSettingValueType
Access
Read-only
Table 1112. BIOS Setting Current Value
Name
biosSettingCurrentValue
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.6
Description
Defines the current value of the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1113. BIOS Setting Pending Value
Name
biosSettingPendingValue
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.7
Description
Defines the pending value of the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1114. BIOS Setting Default Value
Name
biosSettingDefaultValue
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.8
Description
Defines the default value of the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1115. BIOS Setting Possible Values
Name
biosSettingPossibleValues
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.9
Description
Defines the possible values of the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1116. BIOS Setting Display Order
Name
biosSettingDisplayOrder
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.10
Description
Defines the recommended display order of the BIOS setting within its
BIOS setting group.
Syntax
DellUnsigned32BitRange
Access
Read-only
295
Table 1117. BIOS Setting Group Display Name
Name
biosSettingGroupDisplayName
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.11
Description
Defines the display name of the BIOS setting group for the BIOS setting.
Syntax
DisplayString
Access
Read-only
Table 1118. BIOS Setting FQDD
Name
biosSettingFQDD
Object ID
1.3.6.1.4.1.674.10892.1.1400.90.1.12
Description
Fully Qualified Device Descriptor (FQDD) for the BIOS setting.
Syntax
DisplayString
Access
Read-only
BIOS Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 1119. Speaker Control Capabilities Unique
Variable Name: DellSpeakerControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Speaker control capabilities are unknown.
enableCapable(2)
Setup BIOS can enable speaker control.
lowCapable(4)
Setup BIOS can set the speaker volume to low.
mediumCapable(8)
Setup BIOS can set the speaker volume to
medium.
highCapable(16)
Setup BIOS can set the speaker volume to high.
allVolumeCapable(30)
Setup BIOS can set the speaker volume to any of
the three settings.
Table 1120. Speaker Control Settings Unique
Variable Name: DellSpeakerControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Speaker control state is unknown.
enabled(2)
Speaker control is enabled.
low(4)
Speaker control volume is low.
296
medium(8)
Speaker control volume is medium.
high(16)
Speaker control volume is high.
Table 1121. Network Interface (NIF) Wakeup on LAN Capabilities Unique
Variable Name: DellNIFwakeonLanControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Setup BIOS Wakeup on LAN capabilities are
unknown.
enableCapable(2)
Setup BIOS is capable of enabling the NIF Wakeup
on LAN.
addInCardCapable(4)
Setup BIOS is capable of enabling Wakeup on LAN
by option card.
onBoardCapable(8)
Setup BIOS is capable of enabling Wakeup on LAN
by integrated NIF.
bothCapable(14)
Setup BIOS is capable of enabling Wakeup on LAN
by either option card or integrated NIF.
Table 1122. NIF Wakeup on LAN Control Settings Unique
Variable Name: DellNIFwakeonLanControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
NIF Wakeup on LAN state is unknown.
enabled(2)
NIF Wakeup on LAN is enabled.
addInCard(4)
NIF Wakeup on LAN is by option card.
onBoard(8)
NIF Wakeup on LAN is by integrated NIF.
addInCardOrOnBoard(12)
NIF Wakeup on LAN is by option card or integrated
NIF.
Table 1123. Boot Sequence Control Capabilities Unique
Variable Name: DellBootSequenceControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
bootSequenceUnknown(1)
Boot sequence capabilities are unknown.
bootFromDisketteFirstCapable (2)
Setup BIOS can boot from a diskette first.
bootFromhardDriveFirstCapable (4)
Setup BIOS can boot from an IDE hard drive first.
297
bootFromDisketteORHardDrive
FirstCapable(6)
Setup BIOS can boot from a diskette or an IDE hard
drive first.
bootFromDeviceListCapable(8)
Setup BIOS can boot from a device list.
bootFromCDROMFirstCapable(16)
Setup BIOS can boot from a CD first.
allFirstCapable(30)
Setup BIOS can boot by any of the preceding
methods first.
Table 1124. Boot Sequence Control Settings Unique
Variable Name: DellBootSequenceControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
bootSequenceUnknown(1)
Boot sequence state is unknown.
bootFromDisketteFirst(2)
Setup BIOS is set to boot by diskette first.
bootFromHardDriveFirst(4)
Setup BIOS is set to boot by IDE hard drive first.
bootFromDeviceList(8)
Setup BIOS is set to boot by a device list.
bootFromCDROMFirst(16)
Setup BIOS is set to boot by CD first.
Table 1125. BIOS Password Control Capabilities
Variable Name: DellBIOSPasswordControlCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
passwordControlCapabilitiesUn known(1)
BIOS password capabilities are unknown.
passwordControlEnableCapable (2)
Setup BIOS is capable of enabling password
changes.
passwordControlJumperDisable Capable(4) Setup BIOS is capable of determining if password
control can be jumper disabled.
passwordControlEnableANDJumper
DisableCapable(6)
Setup BIOS is capable of enabling password
changes and of determining if password control
can be jumper disabled.
Table 1126. BIOS Password Control Settings Unique
Variable Name: DellBIOSPasswordControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
passwordControlSettingsUnknown(1)
Setup BIOS password state is unknown.
passwordControlEnabled(2)
Setup BIOS has password changes enabled.
298
passwordControlJumperDisabled(4)
Setup BIOS has determined that password control
has been disabled by a jumper.
Table 1127. BIOS Password Control Settings
Variable Name: DellBIOSPasswordControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
passwordControlSettingsUnknown(1)
Setup BIOS password state is unknown.
passwordControlEnabled(2)
Setup BIOS has password changes enabled.
passwordControlJumperDisabled(4)
Setup BIOS has determined that password control
has been disabled by a jumper.
Table 1128. TPM Security Control Capabilities
Variable Name: DellTPMSecurityControlCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
offCapable(1)
TPM security can be Off.
onWithPrebootMeasurementsCap able(2)
TPM security can be On with Pre-boot
Measurements.
onWithoutPrebootMeasurements Capable(4) TPM security can be On without Pre-boot
Measurements.
Table 1129. TPM Security Control Setting
Variable Name: DellTPMSecurityControlSetting
Data Type: Integer
Possible Data Values
Meaning of Data Value
off(0)
TPM security is Off.
onWithPrebootMeasurements(1)
TPM security is On with Pre-boot Measurements.
onWithoutPrebootMeasurements (2)
TPM security is On without Pre-boot
Measurements.
Table 1130. Parallel Port Control Capabilities
Variable Name: DellParallelPortControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Setup BIOS parallel port capabilities are unknown.
enableCapable(2)
Setup BIOS can enable the parallel port.
299
lpt1Capable(4)
Setup BIOS can support parallel port 1.
lpt1andEnableCapable(6)
Setup BIOS has enabled parallel port 1.
lpt2Capable(8)
Setup BIOS can support parallel port 2.
lpt2andEnableCapable(10)
Setup BIOS has enabled parallel port 2.
lpt3Capable(16)
Setup BIOS can support parallel port 3.
lpt3andEnableCapable(18)
Setup BIOS has enabled parallel port 3.
allParallelPortCapable(30)
Setup BIOS can support any of the three parallel
ports.
Table 1131. Parallel Port Control Settings
Variable Name: DellParallelPortControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Parallel port state is unknown.
enabled(2)
Setup BIOS has enabled the parallel port.
lpt1(4)
Setup BIOS supports parallel port 1.
lpt1Enabled(6)
Setup BIOS has enabled parallel port 1.
lpt2(8)
Setup BIOS supports parallel port 2.
lpt2Enabled(10)
Setup BIOS has enabled parallel port 2.
lpt3(16)
Setup BIOS supports parallel port 3.
Table 1132. Parallel Port Control Mode Settings
Variable Name: DellParallelPortControlModeSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Parallel port mode is unknown.
atModeEnabled(2)
Setup BIOS has set the parallel port to AT mode.
ps2ModeEnabled(4)
Setup BIOS has set the parallel port to Personal
Systems/2 (PS/2) mode.
ecpModeEnabled(8)
Setup BIOS has set the parallel port to Extended
Capabilities Port (ECP) mode.
eppModeEnabled(16)
Setup BIOS has set the parallel port to Enhanced
Parallel Port (EPP) mode.
300
Table 1133. Serial Port Control Capabilities
Variable Name: DellSerialPortControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Setup BIOS serial port capabilities are unknown.
enableCapable(2)
Setup BIOS can enable the serial port.
com1Capable(4)
Setup BIOS can support serial port 1.
enableAndCom1Capable(6)
Setup BIOS can enable serial port 1.
com2Capable(8)
Setup BIOS can support serial port 2.
enableAndCom2Capable(10)
Setup BIOS is capable of enabling serial port 2.
com3Capable(16)
Setup BIOS can support serial port 3.
enableAndCom3Capable(18)
Setup BIOS is capable of enabling serial port 3.
com4Capable(32)
Setup BIOS can support serial port 4.
enableAndCom4Capable(34)
Setup BIOS is capable of enabling serial port 4.
autoConfigCapable(64)
Setup BIOS is capable of autoconfiguring all serial
ports.
com1OrCom3CapableAndAuto
ConfigCapable(86)
Setup BIOS has enabled autoconfiguration of
COM1 and COM3 serial ports.
com2OrCom4CapableAndAuto
ConfigCapable(106)
Setup BIOS has enabled autoconfiguration of
COM2 and COM4 serial ports.
allcomCapable(126)
Setup BIOS is capable of enabling or
autoconfiguring all serial ports.
Table 1134. Serial Port Control Settings
Variable Name: DellSerialPortControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Serial port state is unknown.
enabled(2)
Setup BIOS has enabled the serial port.
com1(4)
Setup BIOS has selected serial port 1.
com1Enabled(6)
Setup BIOS has enabled serial port 1.
com2(8)
Setup BIOS has selected serial port 2.
com2Enabled(10)
Setup BIOS has enabled serial port 2.
com3(16)
Setup BIOS has selected serial port 3.
com3Enabled(18)
Setup BIOS has enabled serial port 3.
301
com4(32)
Setup BIOS has selected serial port 4.
com4Enabled(34)
Setup BIOS has enabled serial port 4.
comPortsAutoConfig(64)
Setup BIOS has selected autoconfiguration of serial
ports.
enabledAndAutoConfig(66)
Setup BIOS has enabled autoconfiguration of serial
ports.
Table 1135. IDE Control Capabilities
Variable Name: DellideControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
IDE control capabilities are unknown.
ideControlAutoConfigOrEnable Capable(2) IDE controller is autoconfigurable or enable
capable.
Table 1136. Diskette Control Settings
Variable Name: DellDisketteControlSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Diskette control state is unknown.
disketteControlAutoConfigEnabled
OrEnabled(2)
Diskette control is set as autoconfigurable or
enabled.
Table 1137. Network Interface Control Capabilities
Variable Name: DellNetworkInterfaceControlCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Unknown setup BIOS network interface
capabilities.
enableCapable(2)
Setup BIOS is capable of enabling the network
interface.
enableWithoutPXECapable(4)
Setup BIOS is capable of enabling the NIF without
Pre-boot eXecution Environment (PXE).
Table 1138. Network Interface Control Settings
Variable Name: DellNetworkInterfaceControlSettingsUnique
Data Type: Integer
Possible Data Values
302
Meaning of Data Value
unknown(1)
Network interface state is unknown.
enabled(2)
Network interface is enabled.
enabledWithoutPXE(4)
Network interface is enabled without PXE.
Table 1139. BIOS Setting Value Type
Variable Name: DellBIOSSettingValueType
Data Type: Integer
Possible Data Values
Meaning of Data Value
integer(1)
Value type is integer.
string(2)
Value type is string.
enumeration(3)
Value type is enumeration.
orderedList(4)
Value type is ordered list.
Local Response Agent Group
The Local Response Agent Group provides information about various attributes of your system’s local
response agent (LRA). The LRA allows systems managers to predetermine how a system running the
server administrator responds to a particular event type, such as the loss of redundancy in a specific
component or the elevation of temperature in a chassis. Systems managers can configure the LRA to
respond to an event type with a specific action. When the condition of the critical component worsens,
the systems manager can escalate the response to make it more obvious to the operator.
For example, when a voltage probe on a monitored machine reaches a warning condition, the systems
manager may want to notify the operator by causing the machine to beep. When the voltage probe
reaches failure, the systems manager might want to have the system that has a failing component send a
broadcast message to the management system and power off the troubled system.
LRA Group Tables
The following management information base (MIB) tables define LRA variable attributes:
•
LRA Global Settings Table
•
LRA Action Table
LRA Global Settings
The global settings table allows the systems manager to determine what LRA capabilities exist for a
specific system that is running Server Administrator. Some machines may support all or some of the
capabilities described in DellLocalResponseAgentCapabilitiesUnique. The LRA Global Settings Table also
defines thermal shutdown capabilities and settings. In the event that a temperature probe determines the
temperature is at or over the failure limit, the systems manager can set an action to be taken
automatically.
Table 1140. LRA Global Settings Table
Name
lRAGlobalSettingsTable
Object ID
1.3.6.1.4.1.674.10892.1.1500.10
303
Description
Defines the LRA Global Settings Table.
Syntax
SEQUENCE OF LRAGlobalSettingsTableEntry
Access
Not accessible
Table 1141. LRA Global Settings Table Entry
Name
lRAGlobalSettingsTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1
Description
Defines the LRA Global Settings Table entry.
Syntax
LRAGlobalSettingsTableEntry
Access
Not accessible
Index
lRAGlobalchassisIndex
Table 1142. LRA Global Chassis Index
Name
lRAGlobalchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1143. LRA Global State
Name
lRAGlobalState
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1.2
Description
Defines the state of the LRA global settings.
Syntax
DellStateSettings
Access
Read-only
Table 1144. LRA Global Settings Disable Time-out Value
Name
lRAGlobalSettingsDisableTimeoutValue
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1.3
Description
Defines the time-out duration countdown, in seconds, that the LRA
global settings are disabled after a system shutdown and reboot.
Syntax
DellUnsigned32BitRange
Access
Read-only
304
Table 1145. LRA Global Settings Capabilities Unique
Name
lRAGlobalSettingsCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1.4
Description
Defines the set of global capabilities that all local response agents may
or may not allow to be set or reset.
Syntax
DellLocalResponseAgentCapabilitiesUnique (LRA Capabilities
Definitions)
Access
Read-only
Table 1146. LRA Global Thermal Shutdown Capabilities Unique
Name
lRAGlobalThermalShutdownCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1.5
Description
Defines the set of thermal shutdown capabilities that are supported by
the LRA.
Syntax
DellLRAThermalShutdownCapabilitiesUnique
Access
Read-only
Table 1147. LRA Global Thermal Shutdown State Settings Unique
Name
lRAGlobalThermalShutdownStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1500.10.1.6
Description
Defines the set of thermal shutdown state and settings that the local
response agent supports.
Syntax
DellLRAThermalShutdownStateSettingsUnique
Access
Read-only
LRA Action Table
The DellLocalResponseAgentCapabilitiesUnique variable in the global action table defines the
capabilities that are allowed for a particular system. The LRA Action Table that follows selects which of
the system’s capabilities (global actions) are to be enabled.
Table 1148. LRA Action Table
Name
lRAActionTableTable
Object ID
1.3.6.1.4.1.674.10892.1.1500.20
Description
Defines the LRA Action Table.
Syntax
SEQUENCE OF LRAActionTableTableEntry
Access
Not accessible
305
Table 1149. LRA Action Table Entry
Name
lRAActionTableTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1500.20.1
Description
Defines the LRA Action Table entry.
Syntax
LRAActionTableTableEntry
Access
Not accessible
Index
lRAActionTablechassisIndex
,
lRAActionTableActionNumberIndex
Table 1150. LRA Action Table Chassis Index
Name
lRAActionTablechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1500.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1151. LRA Action Table Action Number Index
Name
lRAActionTableActionNumberIndex
Object ID
1.3.6.1.4.1.674.10892.1.1500.20.1.2
Description
Defines the LRA action number index. The action number indexes are as
follows:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
306
160 — temperature failure action definition
168 — cooling device failure action definition
172 — voltage failure action definition
200 — temperature warning action definition
202 — voltage warning action definition
204 — cooling device warning action definition
206 — amperage failure action definition
208 — amperage warning action definition
210 — a power or cooling unit redundancy lost action definition
212 — a power or cooling unit redundancy degraded action
definition
214 — power supply failed action definition
220 — chassis intrusion action definition
228 — memory device warning action definition
474 — memory device failure action definition
1006 — automatic system recovery (ASR) action definition
1353 — power supply warning action definition
1553 — log near full action definition
•
•
•
•
•
1554 — log full action definition
1603 — processor warning action definition
1604 — processor failure action definition
1703 — battery warning action definition
1704 — battery failure action definition
Syntax
DellUnsigned16BitRange
Access
Read-only
Table 1152. LRA Action Table User Application Name
Name
lRAActionTableUserApplicationName
Object ID
1.3.6.1.4.1.674.10892.1.1500.20.1.3
Description
When the execute application value is set, provides the following userassignable LRA information:
•
•
Name of the user application executable path
File name to execute
Syntax
DisplayString (SIZE (0..256)
Access
Read-only
Table 1153. LRA Action Table Settings Unique
Name
lRAActionTableSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.1500.20.1.4
Description
Defines the LRA settings.
Syntax
DellLocalResponseAgentSettingsUnique (Local Response Agent Settings
Unique)
Access
Read-only
Local Response Agent Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 1154. LRA Capabilities Definitions
Variable Name: DellLocalResponseAgentCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
speakerControlCapable(1)
The LRA can issue a speaker beep.
consoleAlertCapable(2)
The LRA can alert the console.
broadcastMessageCapable(4)
The LRA can broadcast a message.
osShutDownCapable(8)
The LRA can shut down the operating system.
307
rebootCapable(16)
The LRA can reboot the system.
powerCycleCapable(32)
The LRA is capable of a system power cycle.
powerOFFCapable(64)
The LRA can shut the system power off.
executeApplicationCapable(256)
The LRA can execute a user mode application.
lraFullyCapable(383)
The LRA has all of the preceding capabilities.
Table 1155. LRA Thermal Shutdown Capabilities Unique
Variable Name: DellLRAThermalShutdownCapabilitiesUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
none(0)
The LRA has no thermal shutdown capabilities.
Unknown capabilities(1)
The LRA’s thermal shutdown capabilities are
unknown.
enableCapable(2)
The LRA can be disabled (offline, a binary 0 value)
or enabled (online, a binary 1 value).
warningCapable(4)
The LRA can carry out chassis-determined
action(s) when a warning condition is detected.
enableOnWarningCapable(6)
The LRA enables activation of chassisdetermined
action(s) when a warning condition is detected.
failureCapable(8)
The LRA can carry out chassis-determined
action(s) when a failure condition is detected.
enableOnFailureCapable(10)
The LRA enables activation of chassisdetermined
action(s) when a failure condition is detected.
enableOnWarningOrFailure Capable(14)
The LRA enables activation of chassisdetermined
action(s) when either a failure or a warning
condition is detected.
Table 1156. Local Response Agent Settings Unique
Variable Name: DellLocalResponseAgentSettingsUnique
Data Type: Integer
Possible Data Values
Meaning of Data Value
speakerControl(1)
LRA is set to issue a speaker beep.
consoleAlert(2)
LRA is set to issue a console alert.
broadcastMessage(4)
LRA is set to issue a broadcast message.
osShutDown(8)
LRA is set to issue an operating system shutdown.
reboot(16)
LRA is set to issue a system reboot.
powerCycle(32)
LRA is set to issue a system power cycle.
308
powerOFF(64)
LRA is set to issue a system power off.
executeApplication(256)
LRA is set to start a user mode application.
allLRASettingsUnique(383)
LRA is set to all LRA settings combinations.
Cost of Ownership Group
The Cost of Ownership (COO) Group provides a full set of cost-tracking objects, including fields for the
computer’s manufacturer, insurer, lessor, warranty, user, trouble tickets, and many others. You can use
these management information base (MIB) objects to obtain accurate and complete measurements of
the cost of each computer asset in your organization.
Cost of Ownership Group Tables
The Cost of Ownership Group defines objects in the following MIB tables:
•
Cost of Ownership Table
•
COO Service Contract Table
•
COO Cost Event Log Table
•
COO Warranty Table
•
COO Lease Information Table
•
COO Schedule Number Table
•
COO Options Table
•
COO Maintenance Table
•
COO Repair Table
•
COO Support Information Table
•
COO Trouble Ticket Table
Cost of Ownership Table
The following MIB object sets up the Cost of Ownership Table.
Table 1157. Cost of Ownership
Name
cooTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.10
Description
Defines the Cost of Ownership Table.
Syntax
SEQUENCE OF CooTableEntry
Access
Not accessible
Table 1158. Cost of Ownership Table Entry
Name
cooTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1
Description
Defines the Cost of Ownership Table entry.
Syntax
CooTableEntry
309
Access
Not accessible
Index
coochassisIndex
Table 1159. COO Chassis Index
Name
coochassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
CooTableEntry
Access
Read-only
Table 1160. COO State
Name
cooState
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.2
Description
Defines the acquisition state of the system.
Syntax
DellStateSettings
Access
Read-only
Table 1161. COO Acquisition Purchase Cost
Name
cooAquisitionPurchaseCost
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.3
Description
Defines the purchase cost of the system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1162. COO Acquisition Waybill Number
Name
cooAquisitionWayBillNumber
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.4
Description
Defines the waybill number of the system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1163. COO Acquisition Install Date Name
Name
cooAquisitionInstallDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.5
Description
Defines the installation date and time for the system.
Syntax
DellDateName
310
Access
Read-only
Table 1164. COO Acquisition Purchase Order
Name
cooAquisitionPurchaseOrder
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.6
Description
Defines the purchase order number of the system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1165. COO Acquisition Purchase Date Name
Name
cooAquisitionPurchaseDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.7
Description
Defines the purchase date and time of the system.
Syntax
DellDateName
Access
Read-only
Table 1166. COO Acquisition Signing Authority Name
Name
cooAquisitionSigningAuthorityName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.8
Description
Defines the name of the authorized person who signs for the system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1167. COO Original Machine Configuration Expensed
Name
cooOriginalMachineConfigurationExpensed
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.9
Description
Specifies whether the purchase of this system was expensed.
Syntax
DellBoolean
Access
Read-only
Table 1168. COO Original Machine Configuration Vendor Name
Name
cooOriginalMachineConfigurationVendorName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.10
Description
Defines the vendor name of the system.
Syntax
DellCostofOwnershipString
311
Access
Read-only
Table 1169. COO Cost Center Information Vendor Name
Name
cooCostCenterInformationVendorName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.11
Description
Defines the cost center name of the system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1170. COO User Information User Name
Name
cooUserInformationUserName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.12
Description
Defines the name of the user for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1171. COO Extended Warranty Start Date Name
Name
cooExtendedWarrantyStartDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.13
Description
Defines the extended warranty start date for this system.
Syntax
DellDateName
Access
Read-only
Table 1172. COO Extended Warranty End Date Name
Name
cooExtendedWarrantyEndDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.14
Description
Defines the extended warranty end date for this system.
Syntax
DellDateName
Access
Read-only
Table 1173. COO Extended Warranty Cost
Name
cooExtendedWarrantyCost
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.15
Description
Defines the extended warranty cost date for this system.
Syntax
DellUnsigned32BitRange
312
Access
Read-only
Table 1174. COO Extended Warranty Provider Name
Name
cooExtendedWarrantyProviderName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.16
Description
Defines the name of the extended warranty provider for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1175. COO Ownership Code
Name
cooOwnershipCode
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.17
Description
Defines the ownership code for this system.
Syntax
DellCooOwnershipCodes (See COO Ownership Codes)
Access
Read-only
Table 1176. COO Corporate Owner Name
Name
cooCorporateOwnerName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.18
Description
Defines the name of the corporation that owns this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1177. COO Hazardous Waste Code Name
Name
cooHazardousWasteCodeName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.19
Description
Defines the hazardous waste code for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1178. COO Deployment Date Length
Name
cooDeploymentDateLength
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.20
Description
Defines the deployment time for this system.
Syntax
DellUnsigned32BitRange
313
Access
Read-only
Table 1179. COO Deployment Duration Type
Name
cooDeploymentDurationType
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.21
Description
Defines the deployment time units for this system.
Syntax
DellCooHourDayDurationType (See COO Hour Day Duration Type)
Access
Read-only
Table 1180. COO Training Name
Name
cooTrainingName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.22
Description
Defines the training that the user has for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1181. COO Outsourcing Problem Description Name
Name
cooOutsourcingProblemDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.23
Description
Defines a problem encountered with the outsourcing service provider.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1182. COO Outsourcing Service Fee Name
Name
cooOutsourcingServiceFeeName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.24
Description
Defines amount that the outsourcing vendor charges for service.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1183. COO Outsourcing Signing Authority Name
Name
cooOutsourcingSigningAuthorityName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.25
Description
Defines the name of the person who can sign the authorization for
service.
Syntax
DellCostofOwnershipString
314
Access
Read-only
Table 1184. COO Outsourcing Provider Fee Name
Name
cooOutsourcingProviderFeeName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.26
Description
Defines any additional outsourcing charge for service.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1185. COO Outsourcing Provider Service Level Name
Name
cooOutsourcingProviderServiceLevelName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.27
Description
Defines the service level agreement for the system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1186. COO Insurance Company Name
Name
cooInsuranceCompanyName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.28
Description
Defines the name of the company that insures this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1187. COO Box Asset Tag Name
Name
cooBoxAssetTagName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.29
Description
Defines the name of the asset tag.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1188. COO Box System Name
Name
cooBoxSystemName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.30
Description
Defines the name of the system.
Syntax
DellCostofOwnershipString
315
Access
Read-only
Table 1189. COO Box Central Processing Unit (CPU) Serial Number Name
Name
cooBoxCPUSerialNumberName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.31
Description
Defines the name of the CPU serial number for the system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1190. COO Operating System Upgrade Type Name
Name
cooOperatingSystemUpgradeTypeName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.32
Description
Defines the name of the operating system on this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1191. COO Operating System Upgrade Patch Level Name
Name
cooOperatingSystemUpgradePatchLevelName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.33
Description
Defines the name of the operating system patch level for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1192. COO Operating System Upgrade Date
Name
cooOperatingSystemUpgradeDate
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.34
Description
Defines the upgrade file date for this operating system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1193. COO Depreciation Duration
Name
cooDepreciationDuration
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.35
Description
Defines the length of depreciation for this system.
Syntax
DellUnsigned32BitRange
316
Access
Read-only
Table 1194. COO Depreciation Duration Type
Name
cooDepreciationDurationType
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.36
Description
Defines the unit of time for the depreciation of this system.
Syntax
DellCooMonthYearDurationType
Access
Read-only
Table 1195. COO Depreciation Percentage
Name
cooDepreciationPercentage
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.37
Description
Defines the percentage of depreciation for this system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1196. COO Depreciation Method Name
Name
cooDepreciationMethodName
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.38
Description
Defines the name of the depreciation method for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1197. COO Registration Is Registered
Name
cooRegistrationIsRegistered
Object ID
1.3.6.1.4.1.674.10892.1.1600.10.1.39
Description
Specifies whether this system is registered or not.
Syntax
DellBoolean
Access
Read-only
COO Service Contract Table
The service contract table provides MIB objects that help you track the name, vendor, and type of service
contract you have for your system.
Table 1198. COO Service Contract Table
Name
cooServiceContractTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.20
317
Description
Defines the COO Service Contract Table.
Syntax
SEQUENCE OF CooServiceContractTableEntry
Access
Not accessible
Table 1199. COO Service Contract Table Entry
Name
cooServiceContractTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1
Description
Defines the COO Service Contract Table entry.
Syntax
CooServiceContractTableEntry
Access
Not accessible
Index
cooServiceContractchassisIndex
,
cooServiceContractIndex
Table 1200. COO Service Contract Chassis Index
Name
cooServiceContractchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1201. COO Service Contract Index
Name
cooServiceContractIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1.2
Description
Defines the index (one-based) of this service contract.
Syntax
DellObjectRange
Access
Read-only
Table 1202. COO Service Contract State
Name
cooServiceContractState
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1.3
Description
Defines the status of the service contract for this system.
Syntax
DellStateSettings
Access
Read-only
318
Table 1203. COO Service Contract Was Renewed
Name
cooServiceContractWasRenewed
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1.4
Description
Specifies whether the service contract for this system was renewed.
Syntax
DellBoolean
Access
Read-only
Table 1204. COO Service Contract Type Name
Name
cooServiceContractTypeName
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1.5
Description
Defines the name of the service contract type for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1205. COO Service Contract Vendor Name
Name
cooServiceContractVendorName
Object ID
1.3.6.1.4.1.674.10892.1.1600.20.1.6
Description
Defines the name of the service contract provider for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
COO Cost Event Log Table
The COO Cost Event Log Table provides MIB objects that allow you to track the duration and type of
events that are logged for a particular system.
Table 1206. COO Cost Event Log Table
Name
cooCostEventLogTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.30
Description
Defines the COO Cost Event Log Table.
Syntax
SEQUENCE OF COO CostEventLogTableEntry
Access
Not accessible
Table 1207. COO Cost Event Log Table Entry
Name
cooCostEventLogTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1
Description
Defines the COO Cost Event Log Table entry.
Syntax
cooCostEventLogTableEntry
319
Access
Not accessible
Index
cooCostEventLogchassisIndex
,
cooCostEventLogIndex
Table 1208. COO Cost Event Log Chassis Index
Name
cooCostEventLogchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1209. COO Cost Event Log Index
Name
cooCostEventLogIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1.2
Description
Defines the index (one-based) of the cost event log.
Syntax
DellObjectRange
Access
Read-only
Table 1210. COO Cost Event Log State
Name
cooCostEventLogState
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1.3
Description
Defines the cost event log state of this system.
Syntax
DellStateSettings
Access
Read-only
Table 1211. COO Cost Event Log Duration
Name
cooCostEventLogDuration
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1.4
Description
Defines the duration of the event for this system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1212. COO Cost Event Log Duration Type
Name
cooCostEventLogDurationType
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1.5
320
Description
Defines the duration type of the event for this system.
Syntax
DellCOOHourDayDurationType (See COO Hour Day Duration Type)
Access
Read-only
Table 1213. COO Cost Event Log Description Name
Name
cooCostEventLogDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1600.30.1.6
Description
Defines the name of the event description.
Syntax
DellCostofOwnershipString
Access
Read-only
COO Warranty Table
The COO Warranty Table objects enable you to track facts about the type and duration of the warranty
for a particular system.
Table 1214. COO Warranty Table
Name
cooWarrantyTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.40
Description
Defines the COO Warranty Table.
Syntax
SEQUENCE OF CooWarrantyTableEntry
Access
Not accessible
Table 1215. COO Warranty Table Entry
Name
cooWarrantyTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1
Description
Defines the COO Warranty Table entry.
Syntax
CooWarrantyTableEntry
Access
Not accessible
Index
cooWarrantychassisIndex
,
cooWarrantyIndex
Table 1216. COO Warranty Chassis Index
Name
cooWarrantychassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
321
Access
Read-only
Table 1217. COO Warranty Index
Name
cooWarrantyIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.2
Description
Defines the index of the warranty for this system.
Syntax
DellObjectRange
Access
Read-only
Table 1218. COO Warranty State
Name
cooWarrantyState
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.3
Description
Defines the state of the warranty for this system.
Syntax
DellStateSettings
Access
Read-only
Table 1219. COO Warranty Duration
Name
cooWarrantyDuration
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.4
Description
Defines the duration of the warranty.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1220. COO Warranty Duration Type
Name
cooWarrantyDurationType
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.5
Description
Defines the warranty duration type for the system.
Syntax
DellCOODayMonthDurationType
Access
Read-only
Table 1221. COO Warranty End Date Name
Name
cooWarrantyEndDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.6
Description
Defines the warranty end date for this system.
Syntax
DellDateName
322
Access
Read-only
Table 1222. COO Warranty Cost
Name
cooWarrantyCost
Object ID
1.3.6.1.4.1.674.10892.1.1600.40.1.7
Description
Defines the cost of the warranty for this system.
Syntax
DellUnsigned32BitRange
Access
Read-only
COO Lease Information Table
The COO lease information MIB objects enable you to track information about your lessor, lease
duration, and lease type for each system.
Table 1223. COO Lease Information Table
Name
cooLeaseInformationTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.50
Description
Defines the COO Lease Information Table.
Syntax
SEQUENCE OF CooLeaseInformationTableEntry
Access
Not accessible
Table 1224. COO Lease Information Table Entry
Name
cooLeaseInformationTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1
Description
Defines the COO Lease Information Table entry.
Syntax
CooLeaseInformationTableEntry
Access
Not accessible
Index
cooLeaseInformationchassisIndex
,
cooLeaseInformationIndex
Table 1225. COO Lease Information Chassis Index
Name
cooLeaseInformationchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
323
Table 1226. COO Lease Information Index
Name
cooLeaseInformationIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.2
Description
Defines the index of the lease information for this system.
Syntax
DellObjectRange
Access
Read-only
Table 1227. COO Lease Information State
Name
cooLeaseInformationState
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.3
Description
Defines the lease information state for this system.
Syntax
DellStateSettings
Access
Read-only
Table 1228. COO Lease Information Multiple Schedules
Name
cooLeaseInformationMultipleSchedules
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.4
Description
Defines whether there are multiple schedules for this lease.
Syntax
DellBoolean
Access
Read-only
Table 1229. COO Lease Information Buyout Amount
Name
cooLeaseInformationBuyOutAmount
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.5
Description
Defines the balance purchase price for this system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1230. COO Lease Information Lease Rate Factor
Name
cooLeaseInformationLeaseRateFactor
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.6
Description
Defines the rate factor for the lease on this system.
Syntax
DellUnsigned32BitRange
Access
Read-only
324
Table 1231. COO Lease Information End Date Name
Name
cooLeaseInformationEndDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.7
Description
Defines the end date for the lease on this system.
Syntax
DellDateName
Access
Read-only
Table 1232. COO Lease Information Fair Market Value
Name
cooLeaseInformationFairMarketValue
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.8
Description
Defines the fair market value of this system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1233. COO Lease Information Lessor Name
Name
cooLeaseInformationLessorName
Object ID
1.3.6.1.4.1.674.10892.1.1600.50.1.9
Description
Defines the name of the lessor of this system.
Syntax
DellCostofOwnershipString
Access
Read-only
COO Schedule Number Table
Table 1234. COO Schedule Number Table
Name
cooScheduleNumberTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.60
Description
Defines the COO Schedule Number Information Table.
Syntax
SEQUENCE OF CooScheduleNumberTableEntry
Access
Not accessible
Table 1235. COO Schedule Number Table Entry
Name
cooScheduleNumberTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.60.1
Description
Defines the COO Schedule Number Information Table entry.
Syntax
CooScheduleNumberTableEntry
Access
Not accessible
Index
cooScheduleNumberchassisIndex
325
,
cooScheduleNumberIndex
Table 1236. COO Schedule Number Chassis Index
Name
cooScheduleNumberchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.60.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1237. COO Schedule Number Index
Name
cooScheduleNumberIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.60.1.2
Description
Defines the index of the schedule number information.
Syntax
DellObjectRange
Access
Read-only
Table 1238. COO Schedule Number State
Name
cooScheduleNumberState
Object ID
1.3.6.1.4.1.674.10892.1.1600.60.1.3
Description
Defines the schedule number information state of this system.
Syntax
DellStateSettings
Access
Read-only
Table 1239. COO Schedule Number Lease Information Index Reference
Name
cooScheduleNumberLeaseInformationIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1600.60.1.4
Description
Defines the lease information index number to reference the schedule
number.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1240. COO Schedule Number Description Name
Name
cooScheduleNumberDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1600.60.1.5
Description
Describes the schedule number information.
326
Syntax
DellCostofOwnershipString
Access
Read-only
COO Options Table
Table 1241. COO Options Table
Name
cooOptionsTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.70
Description
Defines the COO Options Table.
Syntax
SEQUENCE OF CooOptionsTableEntry
Access
Not accessible
Table 1242. COO Options Table Entry
Name
cooOptionsTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.70.1
Description
Defines the COO Options Table entry.
Syntax
CooOptionsTableEntry
Access
Not accessible
Index
cooOptionschassisIndex
,
cooOptionsIndex
Table 1243. COO Options Chassis Index
Name
cooOptionschassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.70.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1244. COO Options Index
Name
cooOptionsIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.70.1.2
Description
Defines the index (one-based) of the option information for this system.
Syntax
DellObjectRange
Access
Read-only
327
Table 1245. COO Options State
Name
cooOptionsState
Object ID
1.3.6.1.4.1.674.10892.1.1600.70.1.3
Description
Defines the option information state for this system.
Syntax
DellStateSettings
Access
Read-only
Table 1246. COO Options Lease Information Index Reference
Name
cooOptionsLeaseInformationIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1600.70.1.4
Description
Defines the lease information index of the option information for this
system.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1247. COO Options Description Name
Name
cooOptionsDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1600.70.1.5
Description
Defines the option information description name.
Syntax
DellCostofOwnershipString
Access
Read-only
COO Maintenance Table
Table 1248. COO Maintenance Table
Name
cooMaintenanceTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.80
Description
Defines the COO Maintenance Table.
Syntax
SEQUENCE OF CooMaintenanceTableEntry
Access
Not accessible
Table 1249. COO Maintenance Table Entry
Name
cooMaintenanceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1
Description
Defines the COO Maintenance Table entry.
Syntax
CooMaintenanceTableEntry
Access
Not accessible
328
Index
cooMaintenancechassisIndex
,
cooMaintenanceIndex
Table 1250. COO Maintenance Chassis Index
Name
cooMaintenancechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1251. COO Maintenance Index
Name
cooMaintenanceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.2
Description
Defines the index of this system’s maintenance information.
Syntax
DellObjectRange
Access
Read-only
Table 1252. COO Maintenance State
Name
cooMaintenanceState
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.3
Description
Defines the state of this system’s maintenance information.
Syntax
DellStateSettings
Access
Read-only
Table 1253. COO Maintenance Start Date Name
Name
cooMaintenanceStartDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.4
Description
Defines the start date for maintenance on this system.
Syntax
DellDateName
Access
Read-only
Table 1254. COO Maintenance End Date Name
Name
cooMaintenanceEndDateName
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.5
Description
Defines the end date for maintenance on this system.
329
Syntax
DellDateName
Access
Read-only
Table 1255. COO Maintenance Provider Name
Name
cooMaintenanceProviderName
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.6
Description
Defines the maintenance provider’s name.
Syntax
DellStateSettings
Access
Read-only
Table 1256. COO Maintenance Restrictions Name
Name
cooMaintenanceRestrictionsName
Object ID
1.3.6.1.4.1.674.10892.1.1600.80.1.7
Description
Defines the maintenance agreement restrictions.
Syntax
DellCostofOwnershipString
Access
Read-only
COO Repair Table
Table 1257. COO Repair Table
Name
cooRepairTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.90
Description
Defines the COO Repair Table.
Syntax
SEQUENCE OF CooRepairTableEntry
Access
Not accessible
Table 1258. COO Repair Table Entry
Name
cooRepairTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.90.1
Description
Defines the COO Repair Table entry.
Syntax
CooRepairTableEntry
Access
Not accessible
Index
cooRepairchassisIndex
,
cooRepairIndex
330
Table 1259. COO Repair Chassis Index
Name
cooRepairchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.90.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1260. COO Repair Index
Name
cooRepairIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.90.1.2
Description
Defines the index (one-based) of the repair information for this system.
Syntax
DellObjectRange
Access
Read-only
Table 1261. COO Repair State
Name
cooRepairState
Object ID
1.3.6.1.4.1.674.10892.1.1600.90.1.3
Description
Defines the state of the repair information for this system.
Syntax
DellStateSettings
Access
Read-only
Table 1262. COO Repair Counter
Name
cooRepairCounter
Object ID
1.3.6.1.4.1.674.10892.1.1600.90.1.4
Description
Defines the number of repairs that this system has undergone.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1263. COO Repair Vendor Name
Name
cooRepairVendorName
Object ID
1.3.6.1.4.1.674.10892.1.1600.90.1.5
Description
Defines the name of the vendor that repairs this system.
Syntax
DellStateSettings
Access
Read-only
331
COO Support Information Table
Table 1264. COO Support Information Table
Name
cooSupportInformationTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.100
Description
Defines the COO Support Information Table.
Syntax
SEQUENCE OF cooSupportInformationTableEntry
Access
Not accessible
Table 1265. COO Support Information Table Entry
Name
cooSupportInformationTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1
Description
Defines the COO Support Information Table entry.
Syntax
cooSupportInformationTableEntry
Access
Not accessible
Index
cooSupportInformationchassisIndex
,
cooSupportInformationIndex
Table 1266. COO Support Information Chassis Index
Name
cooSupportInformationchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1267. COO Support Information Index
Name
cooSupportInformationIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.2
Description
Defines the index (one-based) for this system’s support information.
Syntax
DellObjectRange
Access
Read-only
Table 1268. COO Support Information State
Name
cooSupportInformationState
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.3
332
Description
Defines the support information state for this system.
Syntax
DellStateSettings
Access
Read-only
Table 1269. COO Support Information Is Outsourced
Name
cooSupportInformationIsOutsourced
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.4
Description
Specifies whether the support for this system is outsourced or not.
Syntax
DellBoolean
Access
Read-only
Table 1270. COO Support Information Type
Name
cooSupportInformationType
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.5
Description
Defines the type of component, system, or network problem that
occurred.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1271. COO Support Information Help Desk Name
Name
cooSupportInformationHelpDeskName
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.6
Description
Defines the help desk information provided.
Syntax
DellCostofOwnershipString
Access
Read-only
Table 1272. COO Support Information Fix Type Name
Name
cooSupportInformationFixTypeName
Object ID
1.3.6.1.4.1.674.10892.1.1600.100.1.7
Description
Defines the method used to fix the problem.
Syntax
DellCostofOwnershipString
Access
Read-only
COO Trouble Ticket Table
The MIB objects in the Trouble Ticket Table enable you to track details of any trouble tickets that you
open for your system.
333
Table 1273. COO Trouble Ticket Table
Name
cooTroubleTicketTable
Object ID
1.3.6.1.4.1.674.10892.1.1600.110
Description
Defines the COO Trouble Ticket Table.
Syntax
SEQUENCE OF cooTroubleTicketTableEntry
Access
Not accessible
Table 1274. COO Trouble Ticket Table Entry
Name
cooTroubleTicketTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1600.110.1
Description
Defines the COO Trouble Ticket Table entry.
Syntax
cooTroubleTicketTableEntry
Access
Not accessible
Index
cooTroubleTicketchassisIndex
,
cooTroubleTicketIndex
Table 1275. COO Trouble Ticket Chassis Index
Name
cooTroubleTicketchassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.110.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1276. COO Trouble Ticket Index
Name
cooTroubleTicketIndex
Object ID
1.3.6.1.4.1.674.10892.1.1600.110.1.2
Description
Defines the index (one-based) of the system’s trouble ticket information.
Syntax
DellObjectRange
Access
Read-only
Table 1277. COO Trouble Ticket State
Name
cooTroubleTicketState
Object ID
1.3.6.1.4.1.674.10892.1.1600.110.1.3
Description
Defines the trouble ticket information state for this system.
Syntax
DellStateSettings
334
Access
Read-only
Table 1278. COO Trouble Ticket Support Information Index Reference
Name
cooTroubleTicketSupportInformationIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.1600.110.1.4
Description
Defines the support information index that references the trouble ticket.
Syntax
DellUnsigned32BitRange
Access
Read-only
Table 1279. COO Trouble Ticket Number Name
Name
cooTroubleTicketNumberName
Object ID
1.3.6.1.4.1.674.10892.1.1600.110.1.5
Description
Defines the trouble ticket number for this system.
Syntax
DellCostofOwnershipString
Access
Read-only
Cost of Ownership Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 1280. COO Ownership Codes
Variable Name: DellCooOwnershipCodes
Data Type: Integer
Possible Data Values
Meaning of Data Value
other(1)
The ownership code is not one of
following:
unknown(2)
The ownership code is unknown.
owned(3)
The ownership code is owned.
leased(4)
The ownership code is leased.
rented(5)
The ownership code is rented.
offOfLease(6)
The ownership code is off of
lease.
transfer(7)
The ownership code is transfer.
Table 1281. COO Hour Day Duration Type
Variable Name: DellCooHourDayDurationType
Data Type: Integer
Possible Data Values
Meaning of Data Value
335
unknown(1)
Duration time type is unknown.
hours(2)
Duration time type is in hours.
days(3)
Duration time type is in days.
Table 1282. COO Day Month Duration Type
Variable Name: DellCooDayMonthDurationType
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Duration time type is unknown.
days(3)
Duration time type is in days.
months(4)
Duration time type is in months.
Table 1283. COO Month Year Duration Type
Variable Name: DellCooMonthYearDurationType
Data Type: Integer
Possible Data Values
Meaning of Data Value
unknown(1)
Duration time type is unknown.
months(4)
Duration time type is in months.
years(5)
Duration time type is in years.
Remote Access Group
The Remote Access Group provides information about the remote access hardware that may be present
in your system. In addition to providing general information about the capabilities and settings of the
remote access hardware, this group provides information about administrative users, SNMP trap
destinations, modem configuration for dial-up networking, dial-in configuration, and dial-out
destinations.
DRAC 5
On systems with Dell Remote Access Controller DRAC 5, the Remote Access Group includes only the
Remote Access Table.
Remote Access Table
The following MIB object sets up the Remote Access Table.
Table 1284. Remote Access Table
Name
Object ID
1.3.6.1.4.1.674.10892.1.1700.10
Description
Defines the Remote Access Table.
Syntax
SEQUENCE OF RemoteAccessTableEntry
336
Access
Not accessible
Table 1285. Remote Access Table Entry
Name
remoteAccessTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1
Description
Defines the Remote Access Table entry.
Syntax
RemoteAccessTableEntry
Access
Not accessible
Index
remoteAccessChassisIndex ,
remoteAccessAdapterIndex
Table 1286. Remote Access Chassis Index
Name
remoteAccessChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.1
Description
Defines the index (one-based) of the chassis containing the remote
access hardware.
Syntax
DellObjectRange
Access
Read-only
Table 1287. Remote Access Adapter Index
Name
remoteAccessAdapterIndex
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.2
Description
Defines the index (one-based) of the remote access hardware.
Syntax
DellObjectRange
Access
Read-only
Table 1288. Remote Access Type
Name
remoteAccessType
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.3
Description
Defines the type of remote access hardware.
Syntax
DellRemoteAccessType (Remote Access Type)
Access
Read-only
Table 1289. Remote Access State Capabilities
Name
remoteAccessStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.4
Description
Defines the state capabilities of the remote access hardware.
Syntax
DellStateCapabilities
337
Access
Read-only
Table 1290. Remote Access State Settings
Name
remoteAccessStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.5
Description
Defines the state setting of the remote access hardware.
Syntax
DellStateSettings
Access
Read-only
Table 1291. Remote Access Status
Name
remoteAccessStatus
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.6
Description
Defines the status of the remote access hardware.
Syntax
DellStatus
Access
Read-only
Table 1292. Remote Access Product Info Name
Name
remoteAccessProductInfoName
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.7
Description
Defines the name of the product providing the remote access
functionality.
Syntax
DellDisplayString
Access
Read-only
Table 1293. Remote Access Description Info Name
Name
remoteAccessDescriptionInfoName
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.8
Description
Defines the description of the product providing the remote access
functionality.
Syntax
DellDisplayString
Access
Read-only
Table 1294. Remote Access Version Info Name
Name
remoteAccessVersionInfoName
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.9
Description
Defines the version of the product providing the remote access
functionality.
Syntax
DellDisplayString
Access
Read-only
338
Table 1295. Remote Access Local Area Network (LAN) Capabilities
Name
remoteAccessLANCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.14
Description
Defines the LAN capabilities of the remote access hardware.
Syntax
DellRemoteAccessLANCapabilities (Remote Access Local Area Network
(LAN) Capabilities)
Access
Read-only
Table 1296. Remote Access LAN Settings
Name
remoteAccessLANSettings
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.15
Description
Defines the LAN settings of the remote access hardware.
Syntax
DellRemoteAccessLANSettings (Remote Access LAN Settings)
Access
Read-only
Table 1297. Remote Access Network Interface Controller (NIC) Static IP Address
Name
remoteAccessNICStaticIPAddress
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.25
Description
Defines the static IP address to be used by the integrated NIC provided
by the remote access hardware.
Syntax
IpAddress
Access
Read-only
Table 1298. Remote Access NIC Static Netmask Address
Name
remoteAccessNICStaticNetmaskAddress
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.26
Description
Defines the netmask for the static IP address to be used by the
integrated NIC provided by the remote access hardware.
Syntax
IpAddress
Access
Read-only
Table 1299. Remote Access NIC Static Gateway Address
Name
remoteAccessNICStaticGatewayAddress
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.27
Description
Defines the IP address for the gateway associated with the static IP
address to be used by the integrated NIC provided by the remote access
hardware.
Syntax
IpAddress
Access
Read-only
339
Table 1300. Remote Access Personal Computer Memory Card International Association (PCMCIA) Info Name
Name
remoteAccessPCMCIAInfoName
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.28
Description
Defines the information for the PCMCIA device used by the remote
access hardware.
Syntax
DisplayString
Access
Read-only
Table 1301. Remote Access Miscellaneous Information Name
Name
remoteAccessMiscInfoName
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.29
Description
Defines the miscellaneous information for the remote access hardware.
Syntax
Defines the miscellaneous information for the remote access hardware.
Access
Read-only
Table 1302. Remote Access NIC Current IP Address
Name
remoteAccessNICCurrentIPAddress
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.30
Description
Defines the IP address currently being used by the integrated NIC
provided by the remote access hardware.
Syntax
IpAddress
Access
Read-only
Table 1303. Remote Access NIC Current Netmask Address
Name
remoteAccessNICCurrentNetmaskAddress
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.31
Description
Defines the netmask currently being used by the integrated NIC
provided by the remote access hardware.
Syntax
IpAddress
Access
Read-only
Table 1304. Remote Access NIC Current Gateway Address
Name
remoteAccessNICCurrentGatewayAddress
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.32
Description
Defines the IP address for the gateway currently being used by the
integrated NIC provided by the remote access hardware.
Syntax
IpAddress
Access
Read-only
340
Table 1305. Remote Access NIC Current Information From Dynamic Host Configuration Protocol (DHCP)
Name
remoteAccessNICCurrentInfoFromDHCP
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.33
Description
Defines whether DHCP was used to obtain the NIC information
currently being used by the integrated NIC provided by the remote
access hardware.
Syntax
DellBoolean
Access
Read-only
Table 1306. Remote Access Remote Connect URL
Name
remoteAccessRemoteConnectURL
Object ID
1.3.6.1.4.1.674.10892.1.1700.10.1.34
Description
Defines the URL for launching the Remote Access Remote Connect
Interface.
Syntax
DisplayString
Access
Mandatory
Remote Access Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 1307. Remote Access Type
Variable Name:DellRemoteAccessType
Data Type:Integer
Possible Data Values
Meaning of Data Value
remoteAccessType
IsOther(1)
The remote access type is not one of the
following:
remoteAccessType
IsUnknown(2)
The remote access type is unknown.
remoteAccessType
IsDRACIII(3)
The remote access type is DRAC III.
remoteAccessType
IsERA(4)
The remote access type is ERA.
Table 1308. Remote Access Control Capabilities
Variable Name:DellRemoteAccessControlCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no control
capabilities.
unknownCapabilit
ies(1)
The remote access hardware control
capabilities are unknown.
341
logResetCapable(
2)
The remote access hardware can reset its
integrated logs.
hardResetCapabl
e(4)
The remote access hardware can perform a
hard reset.
softResetCapabl
e(8)
The remote access hardware can perform a
soft reset.
gracefulResetCap
able(16)
The remote access hardware can gracefully
shut down and perform a soft reset.
defaultConfigRes
etCapable(32)
The remote access hardware can reset to its
default settings.
shutdownCapable(
64)
The remote access hardware can shut down.
Table 1309. Remote Access Control Settings
Variable Name:DellRemoteAccessControlSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no control
settings.
unknown(1)
The remote access hardware control settings
are unknown.
logReset(2)
The remote access hardware resets its
integrated logs.
hardReset(4)
The remote access hardware performs a
hard reset.
softReset(8)
The remote access hardware performs a soft
reset.
gracefulReset(16
)
The remote access hardware shuts down
and perform a soft reset.
defaultConfigRes
et(32)
The remote access hardware resets to its
default settings.
shutdown(64)
The remote access hardware shuts down.
Table 1310. Remote Access Monitor Capabilities
Variable Name:DellRemoteAccessMonitorCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no monitor
capabilities.
unknownCapabilit
ies(1)
The remote access hardware monitor
capabilities are unknown.
342
extPwrSupplyMoni
torIfConn
ectedCapable(2)
The remote access hardware can be set to
monitor the external power supply, if
connected.
extPwrSupplyMoni
torAlways
EnabledCapable(4
)
The remote access hardware can be set to
always monitor the external power supply.
Table 1311. Remote Access Monitor Settings
Variable Name:DellRemoteAccessMonitorSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no monitor
settings.
unknown(1)
The remote access hardware monitor
settings are unknown.
extPwrSupplyMoni
torIfConn
ectedEnabled(2)
The remote access hardware monitors the
external power supply, if connected.
extPwrSupplyMoni
torAlways
EnabledEnabled(4
)
The remote access hardware always
monitors the external power supply.
Table 1312. Remote Access Local Area Network (LAN) Capabilities
Variable Name:DellRemoteAccessLANCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no LAN
capabilities.
unknownCapabilit
ies(1)
The remote access hardware LAN
capabilities are unknown.
nicCapable(2)
The remote access hardware has a network
interface controller (NIC).
nicDHCPCapable(4
)
The remote access hardware NIC can use
DHCP to obtain an IP address.
Table 1313. Remote Access LAN Settings
Variable Name:DellRemoteAccessLANSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no LAN
settings.
343
unknown(1)
The remote access hardware LAN settings
are unknown.
nicEnabled(2)
The remote access hardware NIC is enabled.
nicDHCPEnabled(4
)
The remote access hardware NIC uses DHCP
to obtain an IP address.
Table 1314. Remote Access Host Capabilities
Variable Name:DellRemoteAccessHostCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no host
capabilities.
unknownCapabilit
ies(1)
The remote access hardware host
capabilities are unknown.
smtpEmailCapabl
e(2)
The remote access hardware supports
sending e-mail using SMTP.
tftpRemoteFloppy
Capable(4)
The remote access hardware supports
remote floppy boot using a TFTP server.
tftpRemoteFwUpda
teCapable(8)
The remote access hardware supports
remote firmware update using a TFTP server.
Table 1315. Remote Access Host Settings
Variable Name:DellRemoteAccessHostSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no host
settings.
unknown(1)
The remote access hardware host settings
are unknown.
smtpEmailEnable
d(2)
The remote access hardware SMTP client is
enabled for sending e-mail.
tftpRemoteFloppy
Enabled(4)
The remote access hardware TFTP client is
enabled for remote floppy boot.
tftpRemoteFwUpda
teEnabled(8)
The remote access hardware TFTP client is
enabled for remote firmware update.
Table 1316. Remote Access Out-Of-Band Simple Network Management Protocol (SNMP) Capabilities
Variable
Name:DellRemoteAccessOutOfBandSNMPCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no out-ofband SNMP capabilities.
344
unknownCapabilit
ies(1)
The remote access hardware out-of-band
SNMP capabilities are unknown.
oobSNMPAgentCapa
ble(2)
The remote access hardware has an out-ofband SNMP agent.
oobSNMPTrapsCapa
ble(4)
The remote access hardware can send outof-band SNMP traps.
Table 1317. Remote Access Out-Of-Band Simple Network Management Protocol (SNMP) Settings
Variable Name:DellRemoteAccessOutOfBandSNMPSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The remote access hardware has no out-ofband SNMP settings.
unknown(1)
The remote access hardware out-of-band
SNMP settings are unknown.
oobSNMPAgentEnab
led(2)
The remote access hardware out-of-band
SNMP agent is enabled.
oobSNMPTrapsEnab
led(4)
The remote access hardware sends out-ofband SNMP traps.
Table 1318. Remote User Admin State Capabilities
Variable Name:DellRemoteUserAdminStateCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The admin user has no state capabilities.
unknownCapabilit
ies(1)
The admin user state capabilities are
unknown.
enableCapable(2)
The admin user can be disabled or enabled.
notReadyCapable(
4)
The admin user can be in the not ready state.
numericPagerCapa
ble(8)
The admin user supports numeric paging.
alphaPagerCapabl
e(16)
The admin user supports alphanumeric
paging.
emailCapable(32)
The admin user supports e-mail.
privilegeCapabl
e(64)
The admin user supports user privileges
configuration.
Table 1319. Remote User Admin State Settings
Variable Name:DellRemoteUserAdminStateSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
345
none(0)
The admin user has no state settings.
unknown(1)
The admin user state settings are unknown.
enabled(2)
The admin user is enabled.
notReady(4)
The admin user is in the not ready state.
numericPagerEnab
led(8)
Numeric paging is enabled for the admin
user.
alphaPagerEnable
d(16)
Alphanumeric paging is enabled for the
admin user.
emailEnabled(32)
E-mail is enabled for the admin user.
Table 1320. Remote User Admin Control Capabilities
Variable Name:DellRemoteUserAdminControlCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The admin user has no control capabilities.
unknownCapabilit
ies(1)
The admin user control capabilities are
unknown.
numericPagerTest
Capable(2)
The admin user can support sending a test
numeric page.
alphaPagerTestCa
pable(4)
The admin user can support sending a test
alphanumeric page.
emailTestCapabl
e(8)
The admin user can support sending a test email.
Table 1321. Remote User Admin Control Settings
Variable Name:DellRemoteUserAdminControlSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The admin user has no control settings.
unknown(1)
The admin user control settings are
unknown.
numericPagerTes
t(2)
A numeric pager test is performed for the
admin user.
alphaPagerTest(4
)
An alphanumeric pager test is performed for
the admin user.
emailTest(8)
An e-mail test is performed for the admin
user.
Table 1322. Remote User Admin Alpha Protocol Type
Variable Name:DellRemoteUserAdminAlphaProtocolType
Data Type:Integer
Possible Data Values
346
Meaning of Data Value
other(1)
The remote user admin alpha protocol type
is not one of the following:
unknown(2)
The remote user admin alpha protocol type
is unknown.
alpha7E0(3)
The remote user admin alpha protocol type
is 7E0.
alpha8N1(4)
The remote user admin alpha protocol type
is 8N1.
Table 1323. Remote User Admin Alpha Baud Type
Variable Name:DellRemoteUserAdminAlphaBaudType
Data Type:Integer
Possible Data Values
Meaning of Data Value
other(1)
The remote user alphanumeric baud rate is
not one of the following:
unknown(2)
The remote user alphanumeric baud rate is
unknown.
alphaBaud300(3)
The remote user alphanumeric baud rate is
300.
alphaBaud1200(4)
The remote user alphanumeric baud rate is
1200.
Table 1324. Remote SNMP Trap State Capabilities
Variable Name:DellRemoteSNMPTrapStateCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The SNMP trap destination has no state
capabilities.
unknownCapabilit
ies (1)
The SNMP trap destination state capabilities
are unknown.
enableCapable(2)
The SNMP trap destination can be disabled
or enabled.
notReadyCapable(
4)
The SNMP trap destination can be in the not
ready state.
Table 1325. Remote SNMP Trap State Settings
Variable Name:DellRemoteSNMPTrapStateSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The SNMP trap destination has no state
settings.
unknown(1)
The SNMP trap destination state settings are
unknown.
347
enabled(2)
The SNMP trap destination is enabled.
notReady(4)
The SNMP trap destination is in the not ready
state.
Table 1326. Remote SNMP Trap Control Capabilities
Variable Name:DellRemoteSNMPTrapControlCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The SNMP trap destination has no control
capabilities.
unknownCapabilit
ies(1)
The SNMP trap destination control
capabilities are unknown.
trapTestCapable(
2)
A SNMP trap test can be performed for the
SNMP trap destination.
Table 1327. Remote SNMP Trap Control Settings
Variable Name:DellRemoteSNMPTrapControlSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The SNMP trap destination has no control
settings.
unknown(1)
The SNMP trap destination control settings
are unknown.
trapTestCapable(
2)
A SNMP trap test is performed for the SNMP
trap destination.
Table 1328. Remote Dial-Up State Capabilities
Variable Name:DellRemoteDialUpStateCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The dial-up functionality has no state
capabilities.
unknownCapabilit
ies(1)
The dial-up functionality state capabilities are
unknown.
enableCapable(2)
The dial-up functionality can be disabled or
enabled.
notReadyCapable(
4)
The dial-up functionality can be in the not
ready state.
dialInCapable(8)
The dial-up functionality can support the
dial-in feature.
dialOutCapable(1
6)
The dial-up functionality can support the
dial-out feature.
348
dialInDHCPCapabl
e(32)
The dial-up functionality can support using
DHCP to obtain an IP address for the dial-in
feature.
dialInAuthAnyCap
able(64)
The dial-up functionality can support any
authentication type (including clear text) for
the dial-in feature.
dialInAuthEncryp
tedCapable(128)
The dial-up functionality can support
encrypted passwords (CHAP) authentication
for the dial-in feature.
dialInAuthMschap
Capable(256)
The dial-up functionality can support
MSCHAP authentication type for the dial-in
feature.
Table 1329. Remote Dial-Up State Settings
Variable Name:DellRemoteDialUpStateSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The dial-up functionality has no state
settings.
unknown(1)
The dial-up functionality state settings are
unknown.
enabled(2)
The dial-up functionality is enabled.
notReadyCapable(
4)
The dial-up functionality is in the not ready
state.
dialInEnabled(8)
The dial-up functionality dial-in feature is
enabled.
dialOutEnabled(1
6)
The dial-up functionality dial-out feature is
enabled.
dialInDHCPEnable
d(32)
The dial-up functionality uses DHCP to
obtain an IP address for the dial-in feature.
dialInAuthAnyEna
bled (64)
The dial-up functionality accepts any
authentication type (including clear text) for
the dial-in feature.
dialInAuthEncryp
ted Enabled(128)
The dial-up functionality uses only encrypted
passwords (CHAP) authentication type for
the dialin feature.
dialInAuthMschap
Enab led(256)
The dial-up functionality uses only MSCHAP
authentication type for the dial-in feature.
Table 1330. Remote Dial-Up Modem Dial Type
Variable Name:DellRemoteDialUpModemDialType
Data Type:Integer
Possible Data Values
Meaning of Data Value
349
remoteDialUpIsOt
her(1)
The remote dial type is not one of the
following:
remoteDialUpIsUn
known(2)
The remote dial type is unknown.
remoteDialUpIsTo
ne(3)
The remote dial type is tone.
remoteDialUpIsPu
lse(4)
The remote dial type is pulse.
Table 1331. Remote User Dial-In State Capabilities
Variable Name:DellRemoteUserDialInStateCapabilities
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The dial-in user has no state capabilities.
unknownCapabilit
ies(1)
The dial-in user state capabilities are
unknown.
enableCapable(2)
The dial-in user can be disabled or enabled.
notReadyCapable(
4)
The dial-in user can be in the not ready state.
dialInCallbackPr
esetNumber
Capable(8)
The dial-in user can support callback using a
preset number.
dialInCallbackUs
erSpecified
Capable(16)
The dial-in user can support callback using a
user-specified number.
Table 1332. Remote User Dial-In State Settings
Variable Name:DellRemoteUserDialInStateSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The dial-in user has no state settings.
unknown(1)
The dial-in user state settings are unknown.
enabled(2)
The dial-in user is enabled.
notReady(4)
The dial-in user is in the not ready state.
dialInCallbackPr
esetNumber
Enabled(8)
Callback using a preset number is enabled
for the dial-in user.
dialInCallbackUs
erSpecified
Enabled(16)
Callback using a user-specified number is
enabled for the dial-in user.
Table 1333. Remote Dial-Out State Capabilities
Variable Name:DellRemoteDialOutStateCapabilities
350
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The dial-out destination has no state
capabilities.
unknownCapabilit
ies(1)
The dial-out destination state capabilities are
unknown.
enableCapable(2)
The dial-out destination can be disabled or
enabled.
notReadyCapable(
4)
The dial-out destination can be in the not
ready state.
dialOutPPPAuthAn
yCapable(8)
The dial-out destination can support any
authentication type (including clear text) for
PPP.
dialOutPPPAuthEn
cryptedCapable(1
6)
The dial-out destination can support
encrypted passwords authentication type for
PPP.
dialOutPPPAuthMs
chapCapable(32)
The dial-out destination can support
MSCHAP authentication type for PPP.
Table 1334. Remote Dial-Out State Settings
Variable Name:DellRemoteDialOutStateSettings
Data Type:Integer
Possible Data Values
Meaning of Data Value
none(0)
The dial-out destination has no state
settings.
unknown(1)
The dial-out destination state settings are
unknown.
enabled(2)
The dial-out destination is disabled or
enabled.
notReady(4)
The dial-out destination is in the not ready
state.
dialOutPPPAuthAn
yEnabled(8)
The dial-out destination accepts any
authentication type (including clear text) for
PPP.
dialOutPPPAuthEn
cryptedEnabled(1
6)
The dial-out destination uses only encrypted
passwords authentication type for PPP.
dialOutPPPAuthMs
chapEnabled(32)
The dial-out destination uses only MSCHAP
authentication type for PPP.
Cluster Group
Clustering combines multiple systems in such a way that they provide services a single system cannot.
Clustering enhances higher availability, scalability, and management. Higher availability is achieved by
using failover clusters, in which resources can automatically move between two or more systems in the
event of a failure. Scalability is achieved by balancing the load of an application across several computer
351
systems. Simpler management is achieved by using virtual servers, as opposed to managing each
individual computer system.
Cluster Group
The Cluster Group defines attributes such as the number of systems in the cluster, capabilities of the
cluster, type of cluster, and name of the cluster.
Cluster Table
The following table defines the attributes of the cluster.
Table 1335. Cluster Table
Name
clusterTable
Object ID
1.3.6.1.4.1.674.10892.1.1800.10
Description
Defines the Cluster Table.
Syntax
SEQUENCE OF ClusterTableEntry
Access
Not accessible
Table 1336. Cluster Table Entry
Name
clusterTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1
Description
Defines the Cluster Table entry.
Syntax
ClusterTableEntry
Access
Not accessible
Index
clusterChassisIndex
,
clusterIndex
Table 1337. Cluster Chassis Index
Name
clusterChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1338. Cluster Index
Name
clusterIndex
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.2
Description
Defines the index (one-based) of the cluster.
Syntax
DellObjectRange
352
Access
Read-only
Table 1339. Cluster State Capabilities
Name
clusterStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.3
Description
Defines the state capabilities of the cluster.
Syntax
DellStateCapabilities
Access
Read-only
Table 1340. Cluster State Settings
Name
clusterStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.4
Description
Defines the state settings of the cluster.
Syntax
DellStateSettings
Access
Read-only
Table 1341. Cluster Status
Name
clusterStatus
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.5
Description
Defines the status of the cluster.
Syntax
DellStatus
Access
Read-only
Table 1342. Cluster Type
Name
clusterType
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.6
Description
Defines the type of the cluster.
Syntax
DellClusterType
Access
Read-only
Table 1343. Cluster Type Description Name
Name
clusterTypeDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.7
Description
Defines the description name for the type of the cluster.
Syntax
DellString
Access
Read-only
353
Table 1344. Cluster Name
Name
clusterName
Object ID
1.3.6.1.4.1.674.10892.1.1800.10.1.8
Description
Defines the name of the cluster.
Syntax
DellString
Access
Read-only
Cluster Group Variable Values
This section includes definitions for Server Administrator-specific variable values used in this section.
Table 1345. Cluster Type
Variable Name:DellClusterType
Data Type:Integer
Possible Data
Values
Meaning of Data Value
unknown(1)
The cluster type is unknown.
highAvailabili
tyCluster(2)
The cluster type is a high-availability cluster.
Baseboard Management Controller Group
The Baseboard Management Controller (BMC) monitors the system for critical events by communicating
with various sensors on the system board and sends alerts and log events when certain parameters
exceed their preset thresholds. The BMC Group provides information about the BMC that may be present
in your system. In addition to providing general information about the BMC, this group provides
information about the serial and local area network (LAN) interfaces of the BMC.
Baseboard Management Controller Group Tables
The objects in the BMC group define information about the BMC and the serial and LAN interfaces that
can be used to access the BMC remotely to perform management activities. Objects for the serial
interface define the serial connection mode, flow control type and bit rate. Objects for the LAN interface
define the media access control (MAC) address, internet protocol (IP) address, subnet mask and default
gateway.
The following MIB tables define the BMC group:
•
Baseboard Management Controller Table
•
Baseboard Management Controller Serial Interface Table
•
Baseboard Management Controller LAN Interface Table
Baseboard Management Controller Table
Table 1346. BMC Table
Name
bmcTable
Object ID
1.3.6.1.4.1.674.10892.1.1900.10
Description
Defines the Baseboard Management Controller Table.
354
Syntax
SEQUENCE OF BmcTableEntry
Access
Not accessible
Table 1347. BMC Table Entry
Name
bmcTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1
Description
Defines the Baseboard Management Controller (BMC) Table Entry.
Syntax
BmcTableEntry
Access
Not accessible
Index
bmcChassisIndex
,
bmcIndex
Table 1348. BMC Chassis Index
Name
bmcChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1349. BMC Index
Name
bmcIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.2
Description
Defines the index (one-based) of the BMC.
Syntax
DellObjectRange
Access
Read-only
Table 1350. BMC State Capabilities
Name
bmcStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.3
Description
Defines the state capabilities of the BMC.
Syntax
DellStateCapabilities
Access
Read-only
Table 1351. BMC State Settings
Name
bmcStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.4
Description
Defines the state settings of the BMC.
355
Syntax
DellStateSettings
Access
Read-only
Table 1352. BMC Status
Name
bmcStatus
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.5
Description
Defines the status of the BMC.
Syntax
DellStatus
Access
Read-only
Table 1353. BMC Display Name
Name
bmcDisplayName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.6
Description
Defines the display name of the BMC.
Syntax
DellString
Access
Read-only
Table 1354. BMC Description Name
Name
bmcDescriptionName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.7
Description
Defines the description of the BMC.
Syntax
DisplayString
Access
Read-only
Table 1355. BMC IPMI Version Name
Name
bmcIPMIVersionName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.8
Description
Defines the version of the Intelligent Platform Management Interface
(IPMI) specification that the BMC supports.
Syntax
DellString
Access
Read-only
Table 1356. BMC GUID
Name
bmcGUID
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.9
Description
Defines the Globally Unique ID (GUID) of the BMC.
Syntax
Octet String
Access
Read-only
356
Table 1357. BMC Type
Name
bmcType
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.10
Description
Defines the type of the BMC.
Syntax
DellManagementControllerType
Access
Read-only
Table 1358. BMC Module Name
Name
bmcModuleName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.11
Description
Defines the module name for the BMC. The module name is present
only on certain systems, such as modular systems.
Syntax
DellString
Access
Read-only
Table 1359. BMC IPv4 URL Name
Name
bmcIPv4URLName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.12
Description
Defines the IPv4 URL for the BMC. The URL is not present on all
systems.
Syntax
DisplayString
Access
Read-only
Table 1360. BMC IPv6 URL Name
Name
bmcIPv6URLName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.13
Description
Defines the IPv6 URL for the BMC. The URL is not present on all
systems.
Syntax
DisplayString
Access
Read-only
Table 1361. BMC Blade Form Factor
Name
bmcBladeFormFactorName
Object ID
1.3.6.1.4.1.674.10892.1.1900.10.1.14
Description
Defines Blade Form Factor
Syntax
DellBladeFormFactorType
Access
Read-only
357
Baseboard Management Controller Serial Interface
Table 1362. BMC Serial Interface Table
Name
bmcSerialInterfaceTable
Object ID
1.3.6.1.4.1.674.10892.1.1900.20
Description
Defines the BMC Serial Interface Table.
Syntax
SEQUENCE OF BmcSerialInterfaceTableEntry
Access
Not accessible
Table 1363. BMC Serial Interface Table Entry
Name
bmcSerialInterfaceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1
Description
Defines the BMC Serial Interface Table Entry.
Syntax
BmcSerialInterfaceTableEntry
Access
Not accessible
Index
bmcSerialInterfaceChassisIndex
,
bmcSerialInterfaceBMCIndex
,
bmcSerialInterfaceIndex
Table 1364. BMC Serial Interface Chassis Index
Name
bmcSerialInterfaceChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1365. BMC Serial Interface BMC Index
Name
bmcSerialInterfaceBMCIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.2
Description
Defines the index (one-based) of the associated BMC.
Syntax
DellObjectRange
Access
Read-only
Table 1366. BMC Serial Interface Index
Name
bmcSerialInterfaceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.3
Description
Defines the index (one-based) of the BMC serial interface.
358
Syntax
DellObjectRange
Access
Read-only
Table 1367. BMC Serial Interface State Capabilities
Name
bmcSerialInterfaceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.4
Description
Defines the state capabilities of the BMC serial interface.
Syntax
DellStateCapabilities
Access
Read-only
Table 1368. BMC Serial Interface State Settings
Name
bmcSerialInterfaceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.5
Description
Defines the state settings of the BMC serial interface.
Syntax
DellStateSettings
Access
Read-only
Table 1369. BMC Serial Interface Status
Name
bmcSerialInterfaceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.6
Description
Defines the status of the BMC serial interface.
Syntax
DellStatus
Access
Read-only
Table 1370. BMC Serial Interface Channel Number
Name
bmcSerialInterfaceChannelNumber
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.7
Description
Defines the BMC channel number of the BMC serial interface.
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 1371. BMC Serial Interface Connection Mode Capabilities
Name
bmcSerialInterfaceConnectionModeCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.8
Description
Defines the connection mode capabilities of the BMC serial interface.
Syntax
DellBMCSerialConnectionModeCapabilities
Access
Read-only
359
Table 1372. BMC Serial Interface Connection Mode Settings
Name
bmcSerialInterfaceConnectionModeSettings
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.9
Description
Defines the connection mode settings of the BMC serial interface.
Syntax
DellBMCSerialConnectionModeSettings
Access
Read-only
Table 1373. BMC Serial Interface Flow Control
Name
bmcSerialInterfaceFlowControl
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.10
Description
Defines the flow control type of the BMC serial interface.
Syntax
DellBMCSerialFlowControlType
Access
Read-only
Table 1374. BMC Serial Interface Bit Rate
Name
bmcSerialInterfaceBitRate
Object ID
1.3.6.1.4.1.674.10892.1.1900.20.1.11
Description
Defines the bit rate of the BMC serial interface.
Syntax
DellBMCSerialBitRateType
Access
Read-only
Baseboard Management Controller LAN Interface Table
Table 1375. BMC LAN Interface
Name
bmcLANInterfaceTable
Object ID
1.3.6.1.4.1.674.10892.1.1900.30
Description
Defines the Baseboard Management Controller (BMC) LAN Interface
Table.
Syntax
SEQUENCE OF BmcLANInterfaceTableEntry
Access
Not accessible
Table 1376. BMC LAN Interface Table Entry
Name
bmcLANInterfaceTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1
Description
Defines the Baseboard Management Controller (BMC) LAN Interface
Table Entry.
Syntax
BmcLANInterfaceTableEntry
Access
Not accessible
Index
bmcLANInterfaceChassisIndex
360
,
bmcLANInterfaceBMCIndex
,
bmcLANInterfaceIndex
Table 1377. BMC LAN Interface Chassis Index
Name
bmcLANInterfaceChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1378. BMC LAN Interface BMC Index
Name
bmcLANInterfaceBMCIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.2
Description
Defines the index (one-based) of the associated BMC.
Syntax
DellObjectRange
Access
Read-only
Table 1379. BMC LAN Interface Index
Name
bmcLANInterfaceIndex
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.3
Description
Defines the index (one-based) of the BMC LAN interface.
Syntax
DellObjectRange
Access
Read-only
Table 1380. BMC LAN Interface State Capabilities
Name
bmcLANInterfaceStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.4
Description
Defines the state capabilities of the BMC LAN interface.
Syntax
DellStateCapabilities
Access
Read-only
Table 1381. BMC LAN Interface State Settings
Name
bmcLANInterfaceStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.5
Description
Defines the state settings of the BMC LAN interface.
Syntax
DellStateSettings
361
Access
Read-only
Table 1382. BMC LAN Interface Status
Name
bmcLANInterfaceStatus
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.6
Description
Defines the status of the BMC LAN interface.
Syntax
DellStatus
Access
Read-only
Table 1383. BMC LAN Interface Channel Number
Name
bmcLANInterfaceChannelNumber
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.7
Description
Defines the BMC channel number of the BMC LAN interface.
Syntax
DellUnsigned8BitRange
Access
Read-only
Table 1384. BMC LAN Interface IP Address Source
Name
bmcLANInterfaceIPAddressSource
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.8
Description
Defines the source type of the IP address of the BMC LAN interface.
Syntax
DellBMCLANIPAddressSourceType
Access
Read-only
Table 1385. BMC LAN Interface IP Address
Name
bmcLANInterfaceIPAddress
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.9
Description
Defines the IP address of the BMC LAN interface.
Syntax
IpAddress
Access
Read-only
Table 1386. BMC LAN Interface Subnet Mask Address
Name
bmcLANInterfaceSubnetMaskAddress
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.10
Description
Defines the subnet mask of the BMC LAN interface.
Syntax
IpAddress
Access
Read-only
362
Table 1387. BMC LAN Interface Default Gateway Address
Name
bmcLANInterfaceDefaultGatewayAddress
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.11
Description
Defines the IP address of the default gateway for the BMC LAN interface.
Syntax
IpAddress
Access
Read-only
Table 1388. BMC LAN Interface MAC Address
Name
bmcLANInterfaceMACAddress
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.12
Description
Defines the MAC address of the BMC LAN interface.
Syntax
DellMACAddress
Access
Read-only
Table 1389. BMC LAN Interface Alert Community Name
Name
bmcLANInterfaceAlertCommunityName
Object ID
1.3.6.1.4.1.674.10892.1.1900.30.1.13
Description
Defines the SNMP community used for BMC LAN alerts (traps) sent on
the BMC LAN interface.
Syntax
DisplayString (SIZE (0..32))
Access
Read-only
Baseboard Management Controller Group Variable Values
This section includes definitions for server administrator-specific variable values used in this section.
Table 1390. Baseboard Management Controller
Variable Name:DellBMCSerialConnectionModeCapabilities
Data Type:Integer
These values are bit masks; therefore, combination values are
possible.
Possible Data Values
Meaning of Data Value
-- none(0)
No mode capabilities.
modemBasic(1)
BMC serial interface supports
Modem Basic mode.
modemPPP(2)
BMC serial interface supports
Modem Point to Point Protocol
(PPP) mode.
modemTerminal(4)
BMC serial interface supports
Modem Terminal mode.
directBasic(8)
BMC serial interface supports
Direct Basic mode.
363
directPPP(16)
BMC serial interface supports
Direct PPP mode.
directTerminal(32)
BMC serial interface supports
Direct Terminal mode.
Table 1391. BMC Serial Connection Mode Settings
Variable
Name:DellBMCSerialConnectionModeSettingsDellBMCSeria
lConnectionModeCapabilities
Data Type:Integer
These values are bit masks; therefore, combination values are
possible.
Possible Data Values
Meaning of Data Value
-- none(0)
No modes enabled.
modemBasic(1)
Modem Basic mode is enabled.
modemPPP(2)
Modem PPP mode is enabled.
modemTerminal(4)
Modem Terminal mode is
enabled.
directBasic(8)
Direct Basic mode is enabled.
directPPP(16)
Direct PPP mode is enabled.
directTerminal(32)
Direct Terminal mode is enabled.
Table 1392. BMC Serial Flow Control Type
Variable Name:DellBMCSerialFlowControlType
Data Type:Integer
Possible Data Values
Meaning of Data Value
-- none(0)
No flow control used.
rtscts(1)
RTS/CTS (hardware) flow control
used.
xonXoff(2)
XON/XOFF flow control used.
Table 1393. BMC Serial Bit Rate Type
Variable Name:DellBMCSerialBitRateType
Data Type:Integer
Possible Data Values
Meaning of Data Value
bps9600(6)
Bit rate is 9600 bps (bits per
second)
bps19200(7)
Bit rate is 19200 bps
bps38400(8)
Bit rate is 38400 bps
bps57600(9)
Bit rate is 57600 bps
bps115200(10)
Bit rate is 115200 bps
364
Table 1394. BMC LAN IP Address Source Type
Variable Name:DellBMCLANIPAddressSourceType
Data Type:Integer
Possible Data Values
Meaning of Data Value
-- unspecified(0)
Source is unspecified.
static(1)
IP address is static.
dhcp(2)
Dynamic Host Configuration
Protocol (DHCP) used to obtain
IP address.
biosOrSystemSoftware(3)
BIOS or system software
provided IP Address.
other(4)
Other protocol used to obtain IP
address.
Table 1395. BMC Management Controller Type
Variable Name:DellManagementControllerType
Data Type:Integer
Possible Data Values
Meaning of Data Value
-- legacyBMC(0)
Controller type is legacy
Baseboard Management
Controller.
iDRAC(8)
Controller type is iDRAC.
iDRAC6(10)
Controller type is Integrated Dell
Remote Access Controller 6.
iDRAC6Modular(11)
Controller type is Integrated Dell
Remote Access Controller 6
(Modular).
iDRAC6BMC(13)
Controller type is Integrated Dell
Remote Access Controller 6
(BMC mode).
iDRAC7(16)
Controller type is Integrated Dell
Remote Access Controller 7.
iDRAC7Modular(17)
Controller type is Integrated Dell
Remote Access Controller 7
(Modular).
Table 1396. Dell Blade Form Factor Type
Variable Name:DellBladeFormFactorType
Data Type:Integer
Possible Data Values
Meaning of Data Value
formFactorTypeIsSingleWid
thHalfHeight(1)
Form Factor Type is
singleWidthHalfHeight .
365
formFactorTypeIsDualWidth
HalfHeight(2)
Form Factor Type is
DualWidthHalfHeight.
formFactorTypeIsSingleWid
thFullHeight(3)
Form Factor Type is
SingleWidthFullHeight.
formFactorTypeIsDualWidth
FullHeight(4)
Form Factor Type is
DualWidthFullHeight.
formFactorTypeIsSingleWid
thQuarterHeight(5)
Form Factor Type is
SingleWidthQuarterHeight.
formFactorTypeIs1UHalfWid
th(6)
Form Factor Type is 1UHalfWidth.
formFactorTypeIs1UQuarter
Width(7)
Form Factor Type is
1UQuarterWidth.
formFactorTypeIs1UFullWid
th(8)
Form Factor Type is 1UFullWidth.
notApplicable(256)
Form Factor Type is Not
Applicable for the system.
Field Replaceable Unit Group
A field replaceable unit (FRU) is a part that can be removed and replaced without having to send the
system to a repair facility. The Field Replaceable Unit Group provides information about the field
replaceable units that may be present in your system.
Field Replaceable Unit Group Tables
The objects in the FRU group define information such as manufacturer, serial number, part number and
revision for field replaceable units. The following MIB tables define the FRU group.
Table 1397. Field Replaceable Unit Table
Name
fruTable
Object ID
1.3.6.1.4.1.674.10892.1.2000.10
Description
Defines the Field Replaceable Unit table.
Syntax
SEQUENCE OF FruTableEntry
Access
Not accessible
Table 1398. FRU Table Entry
Name
fruTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1
Description
Defines the FRU Table Entry.
Syntax
FruTableEntry
Access
Not accessible
Index
fruChassisIndex
366
,
fruIndex
Table 1399. FRU Chassis Index
Name
fruChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.1
Description
Defines the index (one-based) of the chassis containing the FRU.
Syntax
DellObjectRange
Access
Read-only
Table 1400. FRU Index
Name
fruIndex
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.2
Description
Defines the index (one-based) of the FRU.
Syntax
DellObjectRange
Access
Read-only
Table 1401. FRU Information Status
Name
fruInformationStatus
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.3
Description
Defines the status of the FRU table entry.
Syntax
DellStatus
Access
Read-only
Table 1402. FRU Information State
Name
fruInformationState
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.4
Description
Defines the state of the FRU information. Some information for the FRU
may not be available if the state is other than ok(1).
Syntax
DellFRUInformationState
Access
Read-only
Table 1403. FRU Device Name
Name
fruDeviceName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.5
Description
Defines the device name of the FRU.
Syntax
DisplayString (SIZE (0..64))
Access
Read-only
367
Table 1404. FRU Manufacturer Name
Name
fruManufacturerName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.6
Description
Defines the manufacturer of the FRU.
Syntax
DisplayString (SIZE (0..64))
Access
Read-only
Table 1405. FRU Serial Number Name
Name
fruSerialNumberName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.7
Description
Defines the serial number of the FRU.
Syntax
DisplayString (SIZE (0..64))
Access
Read-only
Table 1406. FRU Part Number Name
Name
fruPartNumberName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.8
Description
Defines the part number of the FRU
Syntax
DisplayString (SIZE (0..64))
Access
Read-only
Table 1407. FRU Revision Name
Name
fruRevisionName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.9
Description
Defines the revision of the FRU.
Syntax
DisplayString (SIZE (0..64))
Access
Read-only
Table 1408. FRU Manufacturing Date Name
Name
fruManufacturingDateName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.10
Description
Defines the manufacturing date of the FRU.
Syntax
DellDateName
Access
Read-only
Table 1409. FRU Asset Tag Name
Name
fruAssetTagName
Object ID
1.3.6.1.4.1.674.10892.1.2000.10.1.11
368
Description
Defines the asset tag of the FRU.
Syntax
DisplayString (SIZE (0..64))
Access
Read-only
Field Replaceable Unit Group Variable Values
This section includes definitions for server administrator-specific variable values.
Table 1410. FRU Information State
Variable Name: DellFRUInformationState
Data Type: Integer
Possible Data Values
Meaning of Data Value
ok(1)
FRU information is okay.
notSupported(2)
FRU information is not supported.
notAvailable(3)
FRU information is not available.
checksumInvalid(4)
FRU information checksum is invalid.
corrupted(5)
FRU information is corrupted.
369
370
Storage Management Group
3
The Storage Management Group is composed of the following:
•
Storage Management Group—information about the software product and system status.
•
Storage Management Information Group—properties about the Simple Network Management
Protocol (SNMP) agent.
•
Global Data Group—system status.
•
Physical Devices Group—physical devices managed by the software.
•
Logical Devices Group—logical devices managed by the software.
•
Storage Management Event Group—SNMP traps.
Storage Management Group
The Storage Management Information Base (MIB) Group defines the properties that identify information
about the Storage Management software product and the current status of the system it manages.
NOTE: In Windows the optional “Storage Management” component must first be installed to
respond to SNMP queries in this group. On Linux several optional RPM packages for storage must
be installed. See the Server Administrator Installation Guide for more information.
Table 1411. Software Version
Name
softwareVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.1
Description
Identifies the version number of the storage management component
of the systems management software.
Syntax
DisplayString
Access
Read-only
Table 1412. Global Status
Name
globalStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.2
Description
Identifies global health for the subsystem managed by the Storage
Management software. This global status is customized for HP
OpenView. Other applications should refer to the
agentSystemGlobalStatus entry in the globalData object group.
Possible values:
1: Critical
2: Warning
3: Normal
371
4: Unknown
Syntax
Integer
Access
Read-only
Table 1413. Software Manufacturer
Name
softwareManufacturer
Object ID
1.3.6.1.4.1.674.10893.1.20.3
Description
Identifies the manufacturer of the Storage Management software.
Syntax
DisplayString
Access
Read-only
Table 1414. Software Product
Name
softwareProduct
Object ID
1.3.6.1.4.1.674.10893.1.20.4
Description
Identifies product information for the Storage Management software.
Syntax
DisplayString
Access
Read-only
Table 1415. Software Description
Name
softwareDescription
Object ID
1.3.6.1.4.1.674.10893.1.20.5
Description
Identifies the product description for the Storage Management software.
Syntax
DisplayString
Access
Read-only
Storage Management Information Group
The Storage Management Information MIB Group defines the properties that identify the Storage
Management software SNMP agent.
Table 1416. Display Name
Name
displayName
Object ID
1.3.6.1.4.1.674.10893.1.20.100.1
Description
Identifies the name of this management software for display purposes.
Syntax
DisplayString
Access
Read-only
372
Table 1417. Description
Name
description
Object ID
1.3.6.1.4.1.674.10893.1.20.100.2
Description
Provides a short description of this management software.
Syntax
DisplayString
Access
Read-only
Table 1418. Agent Vendor
Name
agentVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.100.3
Description
Identifies the name of the management software manufacturer.
Syntax
DisplayString
Access
Read-only
Table 1419. Agent Version
Name
agentVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.100.4
Description
This entry is obsolete. Refer to softwareVersion.
Syntax
DisplayString
Access
Read-only
Global Data Group
The Global Data Management Information Base (MIB) Group defines the properties that identify status
information about the system that the Storage Management software is managing and about the Storage
Management SNMP agent.
Table 1420. Agent System Global Status
Name
agentSystemGlobalStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.110.1
Description
This entry is obsolete. Use the value agentGlobalSystemStatus.
Syntax
Integer
Access
Read-only
Table 1421. Agent Last Global Status
Name
agentLastGlobalStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.110.2
Description
This entry is obsolete. Use the value agentLastGlobalSystemStatus.
373
Syntax
Integer
Access
Read-only
Table 1422. Agent Time Stamp
Name
agentTimeStamp
Object ID
1.3.6.1.4.1.674.10893.1.20.110.3
Description
Identifies the last time that the agent values have been updated.
Universal time in seconds since UTC 1/1/70.
Syntax
Integer
Access
Read-only
Table 1423. Agent Get Timeout
Name
agentGetTimeout
Object ID
1.3.6.1.4.1.674.10893.1.20.110.4
Description
Indicates the suggested timeout value in milliseconds for how long the
SNMP getter should wait while attempting to poll the SNMP agent.
Syntax
Integer
Access
Read-only
Table 1424. Agent Modifiers
Name
agentModifiers
Object ID
1.3.6.1.4.1.674.10893.1.20.110.5
Description
Identifies the agent functional modifiers. When set, the modifier is
active. Bit definitions: Bit 3: agent in debug mode. All other bits are
product specific.
Syntax
Integer
Access
Read-only
Table 1425. Agent Refresh Rate
Name
agentRefreshRate
Object ID
1.3.6.1.4.1.674.10893.1.20.110.6
Description
Identifies the rate, given in seconds, at which the cached data for SNMP
is refreshed. The default value is 300 seconds, or 5 minutes.
Syntax
Integer
Access
Read-only
374
Table 1426. Agent Hostname
Name
agentHostname
Object ID
1.3.6.1.4.1.674.10893.1.20.110.7
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1427. Agent IP Address
Name
agentIPAddress
Object ID
1.3.6.1.4.1.674.10893.1.20.110.8
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1428. Agent Software Status
Name
agentSoftwareStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.110.9
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1429. Agent SNMP Version
Name
agentSnmpVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.110.10
Description
This entry is obsolete. Refer to 0001 softwareVersion.
Syntax
DisplayString
Access
Read-only
Table 1430. Agent MIB Version
Name
agentMibVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.110.11
Description
Identifies the version of the Storage Management MIB.
Syntax
DisplayString
Access
Read-only
375
Table 1431. Agent Management Software URL Name
Name
agentManagementSoftwareURLName
Object ID
1.3.6.1.4.1.674.10893.1.20.110.12
Description
Identifies the Universal Resource Locator (URL) of the systems
management software.
Syntax
DisplayString
Access
Read-only
Table 1432. Agent Global System Status
Name
agentGlobalSystemStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.110.13
Description
Global health information for the subsystem managed by the Storage
Management software. This global status should be used by applications
other than HP OpenView. HP OpenView should refer to the globalStatus
in the root level object group. This is a rollup for the entire agent
including any monitored devices. The status is intended to give initiative
to an SNMP monitor to get further data when this status is abnormal.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
NOTE: This global status should be used by applications other than
HP OpenView. HP OpenView should refer to the globalStatus in the
root level object group.
Syntax
DellStatus
Access
Read-only
Table 1433. Agent Last Global System Status
Name
agentLastGlobalSystemStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.110.14
Description
The previous global status of the system managed by the Storage
Management software. Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
376
Syntax
DellStatus
Access
Read-only
Table 1434. Agent Smart Thermal Shutdown
Name
agentSmartThermalShutdown
Object ID
1.3.6.1.4.1.674.10893.1.20.110.15
Description
Indicates the status of smart thermal shutdown for PowerVault 220S
and PowerVault 221S enclosures.
Possible values:
1: Enabled
2: Disabled
3: Not applicable
Syntax
Integer
Access
Read-only
Physical Devices Group
The Physical Devices MIB group provides information about the devices managed by the Storage
Management software and their relationships to each other. The following MIB tables define objects and
relationships (connections) among the objects.
•
Controller Table — describes available properties for each controller on the managed system.
•
Channel Table — describes available properties for each channel on the managed system.
•
Enclosure Table — describes available properties for each enclosure on the managed system.
•
Array Disk Table — describes available properties for each physical array disk on the managed system.
•
Array Disk Enclosure Connection Table — describes the connections between Fibre Channel array
disks, their enclosure, and their associated controller. For each object in the table, its object number
corresponds to an instance number in the appropriate MIB table for that object where all of the object
properties can be found.
•
Array Disk Channel Connection Table — describes the connections between SCSI array disks, their
channel, and their associated controller. For each object in the table, its object number corresponds
to an instance number in the appropriate MIB table for that object where all of the object properties
can be found.
•
Fan Table — describes available properties for each fan on the managed system.
•
Fan Connection Table — describes the connection between each fan on the managed system and its
enclosure. Each enclosure number in the table corresponds to that enclosure instance in the
Enclosure Table.
•
Power Supply Table — describes available properties for each power supply on the managed system.
•
Power Supply Connection Table — describes the connection between each power supply on the
managed system and its enclosure. Each enclosure number in the table corresponds to that enclosure
instance in the Enclosure Table.
•
Temperature Probe Table — describes available properties for each temperature probe on the
managed system.
•
Temperature Probe Connection Table — describes the connection between each temperature probe
on the managed system and its enclosure. Each enclosure number in the table corresponds to that
enclosure instance in the Enclosure Table.
•
EMM Table — describes available properties for each Enclosure Management Module (EMM) on the
managed system.
377
•
EMM Connection Table — describes the connection between each EMM on the managed system and
its enclosure. Each enclosure number in the table corresponds to that enclosure instance in the
Enclosure Table.
•
Battery Table — describes available properties for each controller battery on the managed system.
•
Battery Connection Table — describes the connection between each battery on the managed system
and its controller. Each controller number in the table corresponds to that controller instance in the
Controller Table.
Controller Table
This table describes available properties for each controller on the managed system.
The following object sets up the Controller Table.
Table 1435. Controller Table
Name
controllerTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1
Description
Defines the controller table, which is a table of managed Redundant
Array of Independent disks (RAID) controllers. The number of entries is
related to the number of RAID controllers discovered in the system.
Syntax
SEQUENCE OF ControllerEntry
Access
Not accessible
Table 1436. Controller Entry
Name
controllerEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1
Description
Defines the controller table entry, which is an entry in the table of RAID
controllers. A row in this table cannot be created or deleted by SNMP
operations on columns of the table.
Syntax
ControllerEntry
Access
Not accessible
Index
controllerNumber
Table 1437. Controller Number
Name
controllerNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.1
Description
Identifies the instance number of the controller entry.
Syntax
Integer
Access
Read-only
Table 1438. Controller Name
Name
controllerName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.2
378
Description
Identifies the name of the controller in this subsystem as represented in
Storage Management. Includes the controller type and instance. For
example: PERC 3/QC 1.
Syntax
DisplayString
Access
Read-only
Table 1439. Controller Vendor
Name
controllerVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.3
Description
Identifies the controller's (re)seller's name.
Syntax
DisplayString
Access
Read-only
Table 1440. Controller Type
Name
controllerType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.4
Description
Identifies the type of this controller:
1: SCSI
2: PowerVault 660F
3: Power Vault 662F
4: Integrated/Intelligent Drive Electronics (IDE)
5: Serial Advanced Technology Architecture (SATA)
6: Serial Attached SCSI (SAS)
9: PCIe SSD
Syntax
Integer
Access
Read-only
Table 1441. Controller State
Name
controllerState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.5
Description
Identifies the status of the controller's subsystem (which includes any
devices connected to it).
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
6: Degraded
Syntax
Integer
379
Access
Read-only
Table 1442. Controller Severity
Name
controllerSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.6
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
Integer
Access
Read-only
Name
controllerRebuildRateInPercent
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.7
Description
Identifies the percent of the compute cycles dedicated to rebuilding
failed array disks.
Syntax
Integer
Access
Read-only
Table 1443. Controller Firmware Version
Name
controllerFWVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.8
Description
Identifies the controller's current firmware version.
Syntax
DisplayString
Access
Read-only
Table 1444. Controller Cache Size in Megabytes
Name
controllerCacheSizeInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.9
Description
Identifies the controller's current amount of cache memory in
megabytes. If this size is 0, it is less than a megabyte.
Syntax
Integer
Access
Read-only
Table 1445. Controller Cache Size in Bytes
Name
controllerCacheSizeInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.10
Description
Identifies the controller's current amount of cache memory that is less
than a megabyte. This combined with the controllerCacheSizeInMB is
the total amount of memory.
380
Syntax
Integer
Access
Read-only
Table 1446. Controller Physical Device Count
Name
controllerPhysicalDeviceCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.11
Description
Identifies the number of physical devices on the controller channel
including both disks and the controller.
Syntax
Integer
Access
Read-only
Table 1447. Controller Logical Device Count
Name
controllerLogicalDeviceCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.12
Description
Identifies the number of virtual disks on the controller.
Syntax
Integer
Access
Read-only
Table 1448. Controller Partner Status
Name
controllerPartnerStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.13
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1449. Controller Host Port Count
Name
controllerHostPortCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.14
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1450. Controller Memory Size in Megabytes
Name
controllerMemorySizeInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.15
381
Description
Identifies the size of memory in megabytes on the controller. If this size
is 0, it is less than a megabyte. This attribute is only supported on
Adaptec controllers.
Syntax
Integer
Access
Read-only
Table 1451. Controller Memory Size in Bytes
Name
controllerMemorySizeInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.16
Description
Identifies the size of memory on the controller that is less than a
megabyte. This combined with the controllerMemorySizeInMB is the
total size of the memory. This attribute is only supported on Adaptec
controllers.
Syntax
Integer
Access
Read-only
Table 1452. Controller Drive Channel Count
Name
controllerDriveChannelCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.17
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1453. Controller Fault Tolerant
Name
controllerFaultTolerant
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.18
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1454. Controller C0 Port 0 World Wide Name
Name
controllerC0Port0WorldWideName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.19
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
382
Access
Read-only
Table 1455. Controller C0 Port 0 Name
Name
controllerC0Port0Name
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.20
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1456. Controller C0 Port 0 ID
Name
controllerC0Port0ID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.21
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1457. Controller C0 Target
Name
controllerC0Target
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.22
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1458. Controller C0 Channel
Name
controllerC0Channel
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.23
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1459. Controller C0 Operating System Controller
Name
controllerC0OSController
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.24
383
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1460. Controller C0 Battery State
Name
controllerC0BatteryState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.25
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1461. Controller C1 Port 0 World Wide Name
Name
controllerC1Port0WWN
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.26
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1462. Controller C1 Port 0 Name
Name
controllerC1Port0Name
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.27
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1463. Controller C1 Port 0 ID
Name
controllerC1Port0ID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.28
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
384
Table 1464. Controller C1 Target
Name
controllerC1Target
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.29
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1465. Controller C1 Channel
Name
controllerC1Channel
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.30
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1466. Controller C1 Operating System Controller
Name
controllerC1OSController
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.31
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1467. Controller Battery State C1
Name
controllerC1BatteryState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.32
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1468. Controller Node World Wide Name
Name
controllerNodeWWN
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.33
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
385
Syntax
DisplayString
Access
Read-only
Table 1469. Controller C0 Port 1 World Wide Name
Name
controllerC0Port1WWN
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.34
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1470. Controller C1 Port 1 World Wide Name
Name
controllerC1Port1WWN
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.35
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1471. Controller Battery Charge Count
Name
controllerBatteryChargeCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.36
Description
This entry is obsolete. Fibre channel is not supported in Storage
Management.
Syntax
Integer
Access
Read-only
Table 1472. Controller Roll-Up Status
Name
controllerRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.37
Description
Indicates severity of the controller state. This is the combined status of
the controller and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
386
Syntax
DellStatus
Access
Read-only
Table 1473. Controller Component Status
Name
controllerComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.38
Description
Indicates the status of the controller itself without the propagation of
any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1474. Controller Nexus ID
Name
controllerNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.39
Description
Durable unique ID for this controller.
Syntax
DisplayString
Access
Read-only
Table 1475. Controller Alarm State
Name
controllerAlarmState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.40
Description
Indicates state, or setting for the controller's alarm.
Possible values:
1: Enabled
2: Disabled
3: Not Applicable
Syntax
Integer
Access
Read-only
Table 1476. Controller Driver Version
Name
controllerDriverVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.41
387
Description
Indicates currently installed driver version of the controller
Syntax
DisplayString
Access
Read-only
Table 1477. Controller PCI Slot
Name
controllerPCISlot
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.42
Description
Indicates the PCI slot number or embedded number for controllers on
the motherboard
Syntax
DisplayString
Access
Read-only
Table 1478. Controller Cluster Mode
Name
controllerClusterMode
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.43
Description
Identifies if the controller is in cluster mode.
Possible values:
1: Enabled
2: Disabled
3: Active (enabled and active)
99: Not Applicable
Syntax
Integer
Access
Read-only
Table 1479. Controller Minimum Firmware Version
Name
controllerMinFWVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.44
Description
The minimum firmware version for Storage Management to support the
controller.
Syntax
DisplayString
Access
Read-only
Table 1480. Controller Minimum Driver Version
Name
controllerMinDriverVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.45
Description
The minimum driver version for Storage Management to support the
controller.
Syntax
DisplayString
388
Access
Read-only
Table 1481. Controller SCSI Initiator ID
Name
controllerSCSIInitiatorID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.46
Description
The SCSI ID of the initiator.
Syntax
Integer
Access
Read-only
Table 1482. Controller Channel Count
Name
controllerChannelCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.47
Description
The number of channels on the controller.
Syntax
Integer
Access
Read-only
Table 1483. Controller Reconstruct Rate
Name
controllerReconstructRate
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.48
Description
The rate for reconstruct on the controller.
Syntax
Integer
Access
Read-only
Table 1484. Controller Patrol Read Rate
Name
controllerPatrolReadRate
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.49
Description
The rate for patrol read on the controller.
Syntax
Integer
Access
Read-only
Table 1485. Controller BGI Rate
Name
controllerBGIRate
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.50
Description
The rate for background initialization on the controller.
Syntax
Integer
389
Access
Read-only
Table 1486. Controller Check Consistency Rate
Name
controllerCheckConsistencyRate
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.51
Description
The rate for check consistency on the controller.
Syntax
Integer
Access
Read-only
Table 1487. Controller Patrol Read Mode
Name
controllerPatrolReadMode
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.52
Description
Identifies the patrol read mode. Possible values: 1: Automatic (enabled)
2: Manual (enabled) 3: Disabled
Syntax
Integer
Access
Read-only
Table 1488. Controller Patrol Read State
Name
controllerPatrolReadState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.53
Description
The state of the patrol read.
Possible values:
1: Stopped - not running
2: Ready - ready to start
4: Active - is running
8: Aborted - has aborted
Syntax
Integer
Access
Read-only
Table 1489. Controller Patrol Read Iterations
Name
controllerPatrolReadIterations
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.54
Description
The number of times Patrol Read has been run on this controller.
Syntax
Integer
Access
Read-only
390
Table 1490. Controller Storport Driver Version
Name
controllerStorportDriverVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.55
Description
Provides current Windows OS storport driver version. Not applicable for
Linux.
Syntax
Octet String
Access
Read-only
Table 1491. Controller Minimum Required Storport Version
Name
controllerMinimumRequiredStorportVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.56
Description
Provides minimum required storport driver version for Windows OS
only.
Syntax
Octet String
Access
Read-only
Table 1492. Controller Encryption Capable
Name
controllerEncryptionCapable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.57
Description
Indicates encryption capability of the controller. Value: 1 - Capable, 99 Not Applicable
Syntax
Integer
Access
Read-only
Name
controllerEncryptionKeyPresent
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.58
Description
Indicates presence of encryption key for the controller.
Value: 1 - Yes, 0 - No, 99 - Not Applicable
Syntax
Integer
Access
Read-only
Table 1493. Controller Persistent Hot Spare
Name
controllerPersistentHotSpare
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.59
Description
Indicates Persistent Hot Spare capability of the controller.
Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax
Integer
391
Access
Read-only
Table 1494. Controller Spin Down Unconfigured Drives
Name
controllerSpinDownUnconfiguredDrives
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.60
Description
Indicates controller capability to put unconfigured drives in power save
mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not
applicable
Syntax
Integer
Access
Read-only
Table 1495. Controller Spin Down Hot Spare Drives
Name
controllerSpinDownHotSpareDrives
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.61
Description
Indicates controller capability to put hot spare drives in power save
mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not
applicable
Syntax
Integer
Access
Read-only
Table 1496. Controller Spin Down Time Interval
Name
controllerSpinDownTimeInterval
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.62
Description
Shows the duration in minutes after which, the unconfigured or hot
spare drives is spun down to power save mode. Value: 30 to 1440
NOTE: A value of 9999 indicates that the feature is not available.
Syntax
Integer
Access
Read-only
Table 1497. Controller Encryption Mode
Name
controllerEncryptionMode
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.63
Description
Indicates the current encryption mode of the controller. Value: 0 - No
Encryption, 1 - Local Key Management (LKM), 2 - Dell Key Management
(DKM), 99 - Not Applicable
Syntax
Integer
Access
Read-only
392
Table 1498. Controller CacheCade
Name
controllerCacheCade
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.64
Description
Indicates if the controller is CacheCade capable or not. Value: 1 Capable, 0 - Not Capable, 99 - Undetermined
Syntax
Integer
Access
Read-only
Table 1499. Controller Spin Down Configured Drives
Name
controllerSpinDownConfiguredDrives
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.65
Description
Indicates controller capability to spin down configured physical disks.
Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Syntax
Integer
Access
Read-only
Table 1500. Controller Automatic Power Saving
Name
controllerAutomaticPowerSaving
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.66
Description
Indicates controller capability for automatic power saving. Value: 0 Disabled, 1 - Enabled, 99 - Undetermined
Syntax
Integer
Access
Read-only
Table 1501. Controller Configured Drives SpinUp Time
Name
controllerConfiguredDrivesSpinUpTime
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.67
Description
Indicates configured drives spin up start time. Value: 1:00 AM to 12:59
PM, 9999 - Undetermined
Syntax
DisplayString
Access
Read-only
Table 1502. Controller Configured Drives SpinUp TimeInterval
Name
controllerConfiguredDrivesSpinUpTimeInterval
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.68
393
Description
Indicates configured drives spin up time interval in hours. This value is
added with configured drives start time to arrive at time window in
which configured drives are always spin up.
Value: 1 .. 24, 9999 - Undetermined
Syntax
Integer
Access
Read-only
Table 1503. Controller Preserved Cache
Name
controllerPreservedCache
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.69
Description
Indicates if preserved cache is present on the controller. Values:
1- Yes
0 - No
99 - Not available / Not applicable
Syntax
Integer
Access
Read-only
Table 1504. Controller PI Enable
Name
controllerPIEnable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.1.1.70
Description
Indicates if T10 PI is enabled on a controller.
Values are:
0 : T10 PI disabled
1 : T10 PI enabled
Syntax
Integer
Access
Read-only
Channel Table
This table describes available properties for each channel on the managed system.
The following object sets up the Channel Table.
Table 1505. Channel Table
Name
channelTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2
Description
Defines the channel table.
Syntax
SEQUENCE OF ChannelEntry
Access
Not accessible
394
Table 1506. Channel Entry
Name
channelEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1
Description
Defines the channel table entry.
Syntax
ChannelEntry
Access
Not accessible
Index
channelNumber
Table 1507. Channel Number
Name
channelNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.1
Description
Identifies the instance number of the channel entry.
Syntax
Integer
Access
Read-only
Table 1508. Channel Name
Name
channelName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.2
Description
Identifies the name of the channel as represented in Storage
Management. The name includes the word channel and the instance.
For example: Channel 1.
Syntax
DisplayString
Access
Read-only
Table 1509. Channel State
Name
channelState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.3
Description
Identifies the current state of this channel.
Possible states:
0: Unknown
1: Ready - The I/O has resumed.
2: Failed
3: Online
4: Offline - The I/O has paused.
6: Degraded
Syntax
Integer
Access
Read-only
395
Table 1510. Channel Severity
Name
channelSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.4
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
Integer
Access
Read-only
Table 1511. Channel Termination
Name
channelTermination
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.5
Description
Identifies the type of SCSI termination on this channel. Termination is
required for proper operation of this channel.
Possible values:
1: Wide Termination (16 bit)
2: Narrow Termination (8 bit)
3: Not Terminated
Syntax
Integer
Access
Read-only
Table 1512. Channel SCSI ID
Name
channelSCSIID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.6
Description
Identifies the SCSI ID of the controller to which the channel belongs.
Syntax
Integer
Access
Read-only
Table 1513. Channel Roll-Up Status
Name
channelRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.7
Description
Identifies the severity of the channel state. This is the combined status
of the channel and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
396
Syntax
DellStatus
Access
Read-only
Table 1514. Channel Component Status
Name
channelComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.8
Description
The status of the channel itself without the propagation of any
contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1515. Channel Nexus ID
Name
channelNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.9
Description
Durable unique ID for this channel.
Syntax
DisplayString
Access
Read-only
Table 1516. Channel Data Rate
Name
channelDataRate
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.10
Description
Identifies the data rate of this channel.
Syntax
DisplayString
Access
Read-only
Table 1517. Channel Bus Type
Name
channelBusType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.2.1.11
Description
The bus type of the channel.
Possible values:
1: SCSI
2: IDE
397
3: Fibre Channel
4: Serial Storage Architecture (SSA)
6: Universal Serial Bus (USB)
7: SATA
8: SAS
9: PCIe
Syntax
Integer
Access
Read-only
Enclosure Table
This table describes available properties for each enclosure on the managed system.
The following object sets up the Enclosure Table.
Table 1518. Enclosure Table
Name
enclosureTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3
Description
Defines the enclosure table.
Syntax
SEQUENCE OF EnclosureEntry
Access
Not accessible
Table 1519. Enclosure Entry
Name
enclosureEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1
Description
Defines the enclosure table entry.
Syntax
EnclosureEntry
Access
Not accessible
Index
enclosureNumber
Table 1520. Enclosure Number
Name
enclosureNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.1
Description
Identifies the instance number of the enclosure entry.
Syntax
Integer
Access
Read-only
Table 1521. Enclosure Name
Name
enclosureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.2
398
Description
Identifies the enclosure's name as represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1522. Enclosure Vendor
Name
enclosureVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.3
Description
Identifies the enclosure's (re)seller's name.
Syntax
DisplayString
Access
Read-only
Table 1523. Enclosure State
Name
enclosureState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.4
Description
The current condition of the enclosure (which includes any devices
connected to it.)
Possible values:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
6: Degraded
Syntax
Integer
Access
Read-only
Table 1524. Enclosure Severity
Name
enclosureSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.5
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
Integer
Access
Read-only
Table 1525. Enclosure ID
Name
enclosureID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.6
Description
Represents unique id for an enclosure.
399
Syntax
DisplayString
Access
Read-only
Table 1526. Enclosure Processor Version
Name
enclosureProcessorVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.7
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1527. Enclosure Service Tag
Name
enclosureServiceTag
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.8
Description
The enclosure identification used when consulting customer support.
Syntax
DisplayString
Access
Read-only
Table 1528. Enclosure Asset Tag
Name
enclosureAssetTag
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.9
Description
Customer definable asset tag for the enclosure.
Syntax
DisplayString
Access
Read-only
Table 1529. Enclosure Asset Name
Name
enclosureAssetName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.10
Description
Customer definable asset name of the enclosure.
Syntax
DisplayString
Access
Read-only
Table 1530. Enclosure Split Bus Part Number
Name
enclosureSplitBusPartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.11
Description
Identifies the enclosure's split bus part number.
Syntax
DisplayString
400
Access
Read-only
Table 1531. Enclosure Product ID
Name
enclosureProductID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.12
Description
Identifies the enclosure's product identification. This also corresponds
to the enclosure type.
Syntax
DisplayString
Access
Read-only
Table 1532. Enclosure Kernel Version
Name
enclosureKernelVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.13
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1533. Enclosure ESM1 Part Number
Name
enclosureESM1PartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.14
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1534. Enclosure ESM2 Part Number
Name
enclosureESM2PartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.15
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1535. Enclosure Type
Name
enclosureType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.16
Description
Indicates the type of the enclosure.
Possible values:
1: Internal
401
2: Dell PowerVault 200S (PowerVault 201S)
3: Dell PowerVault 210S (PowerVault 211S)
4: Dell PowerVault 220S (PowerVault 221S)
5: Dell PowerVault 660F
6: Dell PowerVault 224F
7: Dell PowerVault 660F/PowerVault 224F
8: Dell MD1000 9: Dell MD1120
Syntax
DisplayString
Access
Read-only
Table 1536. Enclosure Processor2 Version
Name
enclosureProcessor2Version
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.17
Description
This entry is obsolete for Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1537. Enclosure Configuration
Name
enclosureConfig
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.18
Description
Identifies the current configuration of the enclosure's backplane.
Possible values:
1: Joined
2: Split Bus
3: Clustered
4: Unified
Syntax
Integer
Access
Read-only
Table 1538. Enclosure Channel Number
Name
enclosureChannelNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.19
Description
Identifies the channel number, or bus, to which the enclosure is
connected.
Syntax
Integer
Access
Read-only
402
Table 1539. Enclosure Alarm
Name
enclosureAlarm
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.20
Description
Identifies the current status of the enclosure's alarm (PowerVault 220S
and PowerVault 221S only.)
Possible values:
1: Disabled
2: Enabled
Syntax
Integer
Access
Read-only
Table 1540. Enclosure Backplane Part Number
Name
enclosureBackplanePartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.21
Description
Identifies the part number of the enclosure's backplane.
Syntax
Integer
Access
Read-only
Table 1541. Enclosure SCSI ID
Name
enclosureSCSIID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.22
Description
Identifies the SCSI ID of the controller to which this enclosure is
attached.
Syntax
Integer
Access
Read-only
Table 1542. Enclosure Roll-Up Status
Name
enclosureRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.23
Description
Identifies the severity of the enclosure state. This is the combined status
of the enclosure and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
403
Access
Read-only
Table 1543. Enclosure Component Status
Name
enclosureComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.24
Description
The status of the enclosure itself without the propagation of any
contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1544. Enclosure Nexus ID
Name
enclosureNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.25
Description
Durable unique ID for this enclosure.
Syntax
Integer
Access
Read-only
Table 1545. Enclosure FirmWare Version
Name
enclosureFirmwareVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.26
Description
The firmware version of the enclosure.
Syntax
DisplayString
Access
Read-only
Table 1546. Enclosure SCSI Rate
Name
enclosureSCSIRate
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.27
Description
Actual SCSI rate in the enclosure.
Syntax
DisplayString
Access
Read-only
404
Table 1547. Enclosure Part Number
Name
enclosurePartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.28
Description
The part number of the enclosure.
Syntax
DisplayString
Access
Read-only
Table 1548. Enclosure Serial Number
Name
enclosureSerialNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.29
Description
Serial number of the enclosure.
Syntax
DisplayString
Access
Read-only
Table 1549. Enclosure SAS Address
Name
enclosureSASAddress
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.30
Description
The specified SAS address if this is a SAS enclosure.
Syntax
DisplayString
Access
Read-only
Table 1550. Enclosure Occupied Slot Count
Name
enclosureOccupiedSlotCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.31
Description
Shows the number of physical disk slots occupied in a storage
enclosure.
NOTE: A value of 9999 indicates that the feature is not available.
Syntax
Integer
Access
Read-only
Table 1551. Enclosure Total Slots
Name
enclosureTotalSlots
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.32
Description
Shows the total number of physical slots in a storage enclosure; it
includes total count of occupied and empty slots.
405
NOTE: A value of 9999 indicates that the feature is not available.
Syntax
Integer
Access
Read-only
Table 1552. Enclosure Empty Slot Count
Name
enclosureEmptySlotCount
Object ID
1.3.6.1.4.1.674.10893.1.20.130.3.1.33
Description
Shows the number of empty physical disk slots in a storage enclosure.
NOTE: A value of 9999 indicates that the feature is not available
Syntax
Integer
Access
Read-only
Array Disk Table
This table describes available properties for each physical array disk on the managed system.
The following object sets up the Array Disk Table.
Table 1553. Array Disk Table
Name
arrayDiskTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4
Description
Defines the array disk table.
Syntax
SEQUENCE OF ArrayDiskEntry
Access
Not accessible
Table 1554. Array Disk Entry
Name
arrayDiskEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1
Description
Defines the array disk table entry.
Syntax
ArrayDiskEntry
Access
Not accessible
Index
arrayDiskNumber
Table 1555. Array Disk Number
Name
arrayDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.1
Description
Identifies the instance number of the array disk entry.
Syntax
Integer
406
Access
Read-only
Table 1556. Array Disk Name
Name
arrayDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.2
Description
Identifies the name of the array disk as represented in Storage
Management.
Syntax
DisplayString
Access
Read-only
Table 1557. Array Disk Vendor
Name
arrayDiskVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.3
Description
The array disk's manufacturer's name.
Syntax
DisplayString
Access
Read-only
Table 1558. Array Disk State
Name
arrayDiskState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.4
Description
Identifies the current state of the array disk.
Possible states:
0: Unknown
1: Ready - Available for use, but no RAID configuration has been
assigned.
2: Failed - Not operational.
3: Online - Operational. RAID configuration has been assigned.
4: Offline - The drive is not available to the RAID controller.
6: Degraded - Refers to a fault-tolerant array/virtual disk that has a failed
disk.
7: Recovering - Refers to state of recovering from bad blocks on disks.
11: Removed - Indicates that array disk has been removed.
13: Non-RAID - Indicates that array disk is not a RAID capable disk.
14: Not Ready - Applicable for PCIeSSD devices indicating that the
device is in locked state.
15: Resynching - Indicates one of the following types of disk operations:
Transform Type, Reconfiguration, and Check Consistency.
22: Replacing - Indicates copyback operation is in progress.
24: Rebuild
25: No Media - CD-ROM or removable disk has no media.
26: Formatting - In the process of formatting.
28: Diagnostics - Diagnostics are running.
407
34: Predictive Failure
35: Initializing: Applies only to virtual disks on PERC, PERC 2/SC, and
PERC 2/DC controllers.
39: Foreign
40: Clear
41: Unsupported
53: Incompatible
56: Read Only - Applicable for PCIeSSD devices. Indicates that device
has reached read-only state.
Syntax
Integer
Access
Read-only
Table 1559. Array Disk Severity
Name
arrayDiskSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.5
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
Integer
Access
Read-only
Table 1560. Array Disk Product ID
Name
arrayDiskProductID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.6
Description
Identifies the model number of the array disk.
Syntax
DisplayString
Access
Read-only
Table 1561. Array Disk Serial Number
Name
arrayDiskSerialNo
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.7
Description
Identifies the array disk's unique identification number from the
manufacturer.
Syntax
DisplayString
Access
Read-only
Table 1562. Array Disk Revision
Name
arrayDiskRevision
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.8
Description
Identifies the firmware version of the array disk.
408
Syntax
DisplayString
Access
Read-only
Table 1563. Array Disk Enclosure ID
Name
arrayDiskEnclosureID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.9
Description
Identifies the SCSI ID of the enclosure processor to which this array disk
belongs.
Syntax
DisplayString
Access
Read-only
Table 1564. Array Disk Channel
Name
arrayDiskChannel
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.10
Description
Identifies the bus to which this array disk is connected.
Syntax
Integer
Access
Read-only
Table 1565. Array Disk Length in Megabytes
Name
arrayDiskLengthInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.11
Description
Identifies the size in megabytes of the array disk. If this size is 0, it is
smaller than a megabyte.
Syntax
Integer
Access
Read-only
Table 1566. Array Disk Length in Bytes
Name
arrayDiskLengthInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.12
Description
Identifies the size of the array disk in bytes that is less than a megabyte.
This size plus the arrayDiskLengthInMB is the total size of the array disk.
Syntax
Integer
Access
Read-only
Table 1567. Array Disk Largest Contiguous Free Space in Megabytes
Name
arrayDiskLargestContiguousFreeSpaceInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.13
409
Description
The size in megabytes of the largest contiguous free space on the array
disk. If this size is 0, it is less than a megabyte.
Syntax
Integer
Access
Read-only
Table 1568. Array Disk Largest Contiguous Free Space in Bytes
Name
arrayDiskLargestContiguousFreeSpaceInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.14
Description
The size of the largest contiguous free space on this array disk in bytes
that is less than a megabyte.This size plus the
arrayDiskLargestContiguousFreeSpaceInMB is the total size of the
largest contiguous free space on the array disk.
Syntax
Integer
Access
Read-only
Table 1569. Array Disk Target ID
Name
arrayDiskTargetID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.15
Description
Identifies the SCSI target ID which this array disk is assigned.
Syntax
Integer
Access
Read-only
Table 1570. Array Disk LUN ID
Name
arrayDiskLunID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.16
Description
Identifies the array disk's logical unit number.
Syntax
Integer
Access
Read-only
Table 1571. Array Disk Used Space in Megabytes
Name
arrayDiskUsedSpaceInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.17
Description
Identifies the amount in megabytes of the used space on the array disk.
If this size is 0, it is smaller than a megabyte.
Syntax
Integer
Access
Read-only
410
Table 1572. Array Disk Used Space in Bytes
Name
arrayDiskUsedSpaceInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.18
Description
Identifies the size in bytes of the used space on the array disk that is
smaller than a megabyte. This size plus the arrayDiskUsedSpaceInMB is
the total amount of used space on the array disk.
Syntax
Integer
Access
Read-only
Table 1573. Array Disk Free Space in Megabytes
Name
arrayDiskFreeSpaceInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.19
Description
Identifies the amount in megabytes of the free space on the array disk. If
this size is 0, it is smaller than a megabyte.
Syntax
Integer
Access
Read-only
Table 1574. Array Disk Free Space in Bytes
Name
arrayDiskFreeSpaceInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.20
Description
Identifies the size in bytes of the free space on the array disk that is
smaller than a megabyte. This size plus the arrayDiskFreeSpaceInMB is
the total amount of free space on the array disk.
Syntax
Integer
Access
Read-only
Table 1575. Array Disk Bus Type
Name
arrayDiskBusType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.21
Description
Identifies the bus type of the array disk.
Possible values:
1: SCSI
2: IDE
3: Fibre Channel
4: SSA
6: USB
7: SATA
8: SAS
9: PCIe
411
Syntax
Integer
Access
Read-only
Table 1576. Array Disk Spare State
Name
arrayDiskSpareState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.22
Description
Identifies the status of the array disk as a spare.
Possible states:
1: Disk is a member of a virtual disk
2: Disk is a member of a disk group
3: Disk is a global hot spare
4: Disk is a dedicated hot spare
5: Not a spare
99: Not applicable
Syntax
Integer
Access
Read-only
Table 1577. Array Disk Roll-Up Status
Name
arrayDiskRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.23
Description
Severity of the array disk state. This is the combined status of the array
disk and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1578. Array Disk Component Status
Name
arrayDiskComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.24
Description
The status of the array disk itself without the propagation of any
contained component status.
Possible values:
1: Other
2: Unknown
3: OK
412
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1579. Array Disk Device Name
Name
arrayDiskDeviceName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.25
Description
Identifies the operating system device name for this disk.
Syntax
DisplayString
Access
Read-only
Table 1580. Array Disk Nexus ID
Name
arrayDiskNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.26
Description
Indicates the durable unique ID for this array disk.
Syntax
DisplayString
Access
Read-only
Table 1581. Array Disk Part Number
Name
arrayDiskPartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.27
Description
Indicates the part number of the disk.
Syntax
DisplayString
Access
Read-only
Table 1582. Array Disk SAS Address
Name
arrayDiskSASAddress
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.28
Description
Indicates the specified SAS address if this is a SAS disk.
Syntax
DisplayString
Access
Read-only
Table 1583. Array Disk Negotiated Speed
Name
arrayDiskNegotiatedSpeed
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.29
413
Description
Indicates the speed at which the drive is actually running in MPS
(megabytes per second).
Syntax
Integer
Access
Read-only
Table 1584. Array Disk Capable Speed
Name
arrayDiskCapableSpeed
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.30
Description
Indicates the maximum speed at which the drive is capable of
negotiating in MPS (megabytes per second).
Syntax
Integer
Access
Read-only
Table 1585. Array Disk Smart Alert Indication
Name
arrayDiskSmartAlertIndication
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.31
Description
Indicates whether the disk has received a predictive failure.
Possible values:
1: No - disk has not received a predictive failure alert
2: Yes - disk has received a predictive failure alert
Syntax
Integer
Access
Read-only
Table 1586. Array Disk Manufacture Day
Name
arrayDiskManufactureDay
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.32
Description
Indicates the day of the week (1=Sunday through 7=Saturday) on which
this disk was manufactured.
Syntax
DisplayString
Access
Read-only
Table 1587. Array Disk Manufacture Week
Name
arrayDiskManufactureWeek
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.33
Description
Indicates the week (1 through 53) in which this disk was manufactured.
Syntax
DisplayString
Access
Read-only
414
Table 1588. Array Disk Manufacture Year
Name
arrayDiskManufactureYear
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.34
Description
Indicates the four digit year in which this disk was manufactured.
Syntax
DisplayString
Access
Read-only
Table 1589. Array Disk Media Type
Name
arrayDiskMediaType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.35
Description
The Media type of the array disk.
Possible Values:
1:unknown
2:hdd
3:ssd
Syntax
INTEGER
Access
Read-only
Table 1590. Array Disk Dell Certified
Name
arrayDiskDellCertified
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.36
Description
Indicates if array disk is certified by Dell. Value: 1 - Certified, 0 - Not
Certified, 99 - Unknown
Syntax
Integer
Access
Read-only
Table 1591. Array Disk Alta Vendor Id
Name
arrayDiskAltaVendorId
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.37
Description
Provides vendor information for Alta interposer.
Syntax
Octet String
Access
Read-only
Table 1592. Array Disk Alta Product Id
Name
arrayDiskAltaProductId
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.38
Description
Provides product ID for Alta interposer.
415
Syntax
Octet String
Access
Read-only
Table 1593. Array Disk Alta Revision Id
Name
arrayDiskAltaRevisionId
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.39
Description
Provides revision ID for Alta interposer.
Syntax
Octet String
Access
Read-only
Table 1594. Array Disk Encryption Capable
Name
arrayDiskEncryptionCapable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.40
Description
Indicates if physical disk is encryption capable. Value: 1 - Capable, 0 Not Capable, 99 - Not Applicable
Syntax
Integer
Access
Read-only
Table 1595. Array Disk Encrypted
Name
arrayDiskEncrypted
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.41
Description
Indicates if the physical disk has encryption enabled. Value: 1 - Yes, 0 No, 99 - Not Applicable
Syntax
Integer
Access
Read-only
Table 1596. Array Disk Power State
Name
arrayDiskPowerState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.42
Description
Indicates power state of a physical drive. Value: 0 - Spun up, 1- Spun
down, 255 - Transition, 99 - Not Applicable
Syntax
Integer
Access
Read-only
Table 1597. Array Disk Drive Write Cache
Name
arrayDiskDriveWriteCache
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.43
416
Description
Indicates drive write cache capability for PCIe SSD devices. Value: 1 Enabled, 0 - Disabled, 99 - Undetermined/NotApplicable
Syntax
Integer
Access
Read-only
Table 1598. Array Disk Model Number
Name
arrayDiskModelNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.44
Description
Provides PCIe SSD device model number.
Syntax
DisplayString
Access
Read-only
Table 1599. Array Disk Life Remaining
Name
arrayDiskLifeRemaining
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.45
Description
Provides PCIe SSD device life remaining in percentage. Value: 0..100,
999 - Undetermined/Not Applicable
Syntax
INTEGER
Access
Read-only
Table 1600. Array Disk Driver Version
Name
arrayDiskDriverVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.46
Description
Provides PCIe SSD device driver version.
Syntax
INTEGER
Access
Read-only
Table 1601. Array Disk Device Life Status
Name
arrayDiskDeviceLifeStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.47
Description
Provides PCIe SSD device life status.
Possible Values:
-1: Not Available / Not Applicable
1: Drive Health Good
2: Approaching Warranty Coverage Expiry
3: Warranty Coverage Expired
4: Approaching Read Only
5: Read Only
417
Syntax
INTEGER
Access
Read-only
Table 1602. Array Disk Read Only
Name
arrayDiskReadOnly
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.48
Description
Provides the read only attribute for PCIe SSD.
Possible Values:
Yes, No, Not Applicable
Syntax
DisplayString
Access
Read-only
Table 1603. Array Disk Remaining Rated Write Endurance
Name
arrayDiskRemainingRatedWriteEndurance
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.49
Description
Provides the remaining rated write endurance for SAS/SATA SSD device.
Possible Values:
0-100% : Not Available / Not Applicable
Syntax
DisplayString
Access
Read-only
Table 1604. Array Disk Sector Size
Name
arrayDiskSectorSize
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.50
Description
Provides the information regarding sector size of the array disk.
Possible Values:
512 or 4096
Syntax
INTEGER
Access
Read-only
Table 1605. Array Disk PI Capable
Name
arrayDiskPICapable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.51
Description
Provides the information regarding T10 PI capability of array disk.
Possible Values:
0 : T10 PI incapable or 1 : T10 PI capable
Syntax
418
INTEGER
Access
Read-only
Table 1606. Array Disk Max Link Width
Name
arrayDiskMaxLinkWidth
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.52
Description
Provides the information regarding Max Link Width of array disk.
Possible Values:
0–8
Syntax
INTEGER
Access
Read-only
Table 1607. Array Disk Negotiated Link Width
Name
arrayDiskNegotiatedLinkWidth
Object ID
1.3.6.1.4.1.674.10893.1.20.130.4.1.53
Description
Provides the information regarding Negotiated Link Width of array disk.
Possible Values:
0–8
Syntax
INTEGER
Access
Read-only
Array Disk Enclosure Connection Table
This table describes the connections among array disks, their enclosure, and their associated controller.
For each object in the table, its object number corresponds to an instance number in the appropriate MIB
table for that object where all of the object properties can be found.
NOTE: Only array disks that are part of an enclosure are listed in this table. Backplanes are
considered enclosures by Storage Management.
The following object sets up the Array Disk Enclosure Connection Table.
Table 1608. Array Disk Enclosure Connection Table
Name
arrayDiskEnclosureConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5
Description
Defines the array disk enclosure connection table.
Syntax
SEQUENCE OF ArrayDiskEnclosureConnectionEntry
Access
Not accessible
Table 1609. Array Disk Enclosure Connection Entry
Name
arrayDiskEnclosureConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1
419
Description
Defines the array disk enclosure connection table entry.
Syntax
Syntax ArrayDiskEnclosureConnectionEntry
Access
Not accessible
Index
Index arrayDiskEnclosureConnectionNumber
Table 1610. Array Disk Enclosure Connection Number
Name
arrayDiskEnclosureConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.1
Description
Identifies the instance number of the array disk enclosure connection
entry.
Syntax
Integer
Access
Read-only
Table 1611. Array Disk Enclosure Connection Array Disk Name
Name
arrayDiskEnclosureConnectionArrayDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.2
Description
Identifies the name of the array disk in this connection as represented in
Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1612. Array Disk Enclosure Connection Array Disk Number
Name
arrayDiskEnclosureConnectionArrayDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.3
Description
Identifies the instance number of the array disk in the arrayDiskTable in
this connection.
Syntax
Integer
Access
Read-only
Table 1613. Array Disk Enclosure Connection Enclosure Name
Name
arrayDiskEnclosureConnectionEnclosureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.4
Description
Identifies the name of the enclosure as represented in Storage
Management to which this array disk belongs.
Syntax
DisplayString
Access
Read-only
420
Table 1614. Array Disk Enclosure Connection Enclosure Number
Name
arrayDiskEnclosureConnectionEnclosureNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.5
Description
Identifies the instance number in the enclosureTable of the enclosure to
which this array disk belongs.
Syntax
Integer
Access
Read-only
Table 1615. Array Disk Enclosure Connection Controller Name
Name
arrayDiskEnclosureConnectionControllerName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.6
Description
Identifies the name of the controller as represented in Storage
Management to which this array disk is connected.
Syntax
DisplayString
Access
Read-only
Table 1616. Array Disk Enclosure Connection Controller Number
Name
arrayDiskEnclosureConnectionControllerNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.5.1.7
Description
Identifies the instance number in the controller, table of the controller
to which this array disk is connected.
Syntax
Integer
Access
Read-only
Array Disk Channel Connection Table
This table describes the connections between array disks, their channel, and their associated controller.
For each object in the table, its object number corresponds to an instance number in the appropriate MIB
table for that object where all of the object properties can be found.
421
NOTE: Only array disks that are NOT part of an enclosure are listed in this table. Backplanes are
considered enclosures by Storage Management.
The following object sets up the Array Disk Channel Connection Table.
Table 1617. Array Disk Channel Connection Table
Name
arrayDiskChannelConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.6
Description
Defines the array disk channel connection table.
Syntax
SEQUENCE OF ArrayDiskChannelConnectionEntry
Access
Not accessible
Table 1618. Array Disk Channel Connection Entry
Name
arrayDiskChannelConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.6.1
Description
Defines the array disk channel connection table entry.
Syntax
ArrayDiskChannelConnectionEntry
Access
Not accessible
Index
arrayDiskEnclosureConnectionNumber
Table 1619. Array Disk Channel Connection Number
Name
arrayDiskChannelConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.6.1.1
Description
Identifies the instance number of the array disk channel connection
entry.
Syntax
Integer
Access
Read-only
Table 1620. Array Disk Channel Connection Array Disk Name
Name
arrayDiskChannelConnectionArrayDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.6.1.2
Description
Identifies the name of the array disk in this connection as
represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1621. Array Disk Channel Connection Array Disk Number
Name
arrayDiskChannelConnectionArrayDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.6.1.3
Description
Identifies the instance number of the array disk in the arrayDiskTable
in this connection.
Syntax
Integer
Access
Read-only
Table 1622. Array Disk Channel Connection Channel Name
422
Name
arrayDiskChannelConnectionChannelName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.6.1.4
Description
Identifies the name of the channel as represented in Storage
Management to which is array disk is connected.
Syntax
DisplayString
Access
Read-only
Fan Table
This table describes available properties for each fan on the managed system.
The following object sets up the Fan Table.
Table 1626. Fan Table
Name
fanTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7
Description
Defines the fan table.
Syntax
SEQUENCE OF FanEntry
Access
Not accessible
Table 1627. Fan Entry
Name
fanEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1
Description
Defines the fan table entry.
Syntax
FanEntry
Access
Not accessible
Index
fanNumber
Table 1628. Fan Number
Name
fanNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.1
Description
Identifies the instance number of the fan entry.
Syntax
Integer
Access
Read-only
Table 1629. Fan Name
Name
fanName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.2
Description
Identifies the fan's name as represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1630. Fan Vendor
Name
fanVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.3
423
Description
Identifies the fan's (re)seller's name.
Syntax
DisplayString
Access
Read-only
Table 1631. Fan State
Name
fanState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.4
Description
Identifies the current state of the fan.
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
6: Degraded
21: Missing
Syntax
Integer
Access
Read-only
Table 1632. Fan Severity
Name
fanSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.5
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
Integer
Access
Read-only
Table 1633. Fan Probe Unit
Name
fanProbeUnit
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.6
Description
This entry is obsolete for Storage Services.
Syntax
DisplayString
Access
Read-only
Table 1634. Fan Probe Minimum Warning
Name
fanProbeMinimumWarning
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.7
424
Description
This entry is obsolete. This setting is not supported by fans managed
under Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1635. Fan Probe Minimum Critical
Name
fanProbeMinimumCritical
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.8
Description
This entry is obsolete. This setting is not supported by fans managed
under Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1636. Fan Probe Maximum Warning
Name
fanProbeMaximumWarning
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.9
Description
This entry is obsolete. This setting is not supported by fans managed
under Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1637. Fan Probe Maximum Critical
Name
fanProbeMaximumCritical
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.10
Description
This entry is obsolete. This setting is not supported by fans managed
under Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1638. Fan Probe Current Value
Name
fanProbeCurrValue
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.11
Description
Identifies the current speed of the fan.
Syntax
DisplayString
Access
Read-only
425
Table 1639. Fan1 Part Number
Name
fan1PartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.12
Description
Identifies the part number of the fan in the enclosure.
Syntax
DisplayString
Access
Read-only
Table 1640. Fan 2 Part Number
Name
fan2PartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.13
Description
This entry is obsolete. This setting is not supported by fans managed
under Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1641. Fan Roll-Up Status
Name
fanRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.14
Description
Severity of the fan state. This is the combined status of the fan and its
components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1642. Fan Component Status
Name
fanComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.15
Description
The status of the fan itself without the propagation of any contained
component status.
Possible values:
1: Other
2: Unknown
3: OK
426
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1643. Fan Nexus ID
Name
fanNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.16
Description
Durable unique ID for this fan.
Syntax
DisplayString
Access
Read-only
Table 1644. Fan Revision
Name
fanRevision
Object ID
1.3.6.1.4.1.674.10893.1.20.130.7.1.17
Description
Indicates the revision number of the fan in the enclosure.
Syntax
DisplayString
Access
Read-only
Fan Connection Table
This table describes the connection between each fan on the managed system and its enclosure. Each
enclosure number in the table corresponds to that enclosure instance in the enclosure Table.
The following object sets up the Fan Connection Table.
Table 1645. Fan Connection Table
Name
fanConnectionTable
Object ID
fanConnectionTable
Description
Defines the fan connection table.
Syntax
SEQUENCE OF FanConnectionEntry
Access
Not accessible
Table 1646. Fan Connection Entry
Name
fanConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.8.1
Description
Defines the fan connection table entry.
Syntax
FanConnectionEntry
427
Access
Not accessible
Index
fanConnectionNumber
Table 1647. Fan Connection Number
Name
fanConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.8.1.1
Description
Identifies the instance number of the fan connection entry.
Syntax
Integer
Access
Read-only
Table 1648. Fan Connection Fan Name
Name
fanConnectionFanName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.8.1.2
Description
Identifies the name of the fan in this connection as represented in
Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1649. Fan Connection Fan Number
Name
fanConnectionFanNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.8.1.3
Description
Identifies the instance number of the fan in the fanTable in the
connection.
Syntax
Integer
Access
Read-only
Table 1650. Fan Connection Enclosure Name
Name
fanConnectionEnclosureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.8.1.4
Description
Identifies the name of the enclosure as represented in Storage
Management to which this fan belongs.
Syntax
DisplayString
Access
Read-only
Table 1651. Fan Connection Enclosure Number
Name
fanConnectionEnclosureNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.8.1.5
428
Description
Identifies the instance number of the enclosure in the enclosureTable to
which this fan belongs.
Syntax
Integer
Access
Read-only
Power Supply Table
Table 1652. Power Supply Table
Name
powerSupplyTable
Object ID
1.3.6.1.4.1.674.10892.1.600.12
Description
Defines the Power Supply Table.
Syntax
PowerSupplyTableEntry
Access
Not accessible
Table 1653. Power Supply Table Entry
Name
powerSupplyTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1
Description
Defines the Power Supply Table entry.
Syntax
PowerSupplyTableEntry
Access
Not accessible
Index
powerSupplychassisIndex, powerSupplyIndex
Table 1654. Power Supply Chassis Index
Name
powerSupplychassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1655. Power Supply Index
Name
powerSupplyIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.2
Description
Defines the index of power supply.
Syntax
DellObjectRange
Access
Read-only
Table 1656. Power Supply State Capabilities Unique
Name
powerSupplyStateCapabilitiesUnique
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.3
429
Description
Defines the capabilities of the power supply.
Syntax
DellPowerSupplyStateCapabilitiesUnique (Power Supply State
Capabilities Unique)
Access
Read-only
Table 1657. Power Supply State Settings Unique
Name
powerSupplyStateSettingsUnique
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.4
Description
Defines the state and settings of the power supply.
Syntax
DellPowerSupplyStateSettingsUnique (Power Supply State Settings
Unique)
Access
Read-only
Table 1658. Power Supply Status
Name
powerSupplyStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.5
Description
Defines the status of the power supply.
Syntax
DellStatus
Access
Read-only
Table 1659. Power Supply Output Watts
Name
powerSupplyOutputWatts
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.6
Description
Defines the maximum sustained output wattage of the power supply in
tenths of watts.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1660. Power Supply Type
Name
powerSupplyType
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.7
Description
Defines the type of power supply.
Syntax
DellPowerSupplyType (Power Supply Type Definitions)
Access
Read-only
Table 1661. Power Supply Location Name
Name
powerSupplyLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.8
Description
Defines the location name of the power supply.
430
Syntax
DellString
Access
Read-only
Table 1662. Power Supply Input Voltage
Name
powerSupplyInputVoltage
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.9
Description
Defines the input voltage to the power supply in volts.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1663. Power Supply Power Unit Index Reference
Name
powerSupplypowerUnitIndexReference
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.10
Description
Defines the index to the associated system power unit in this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1664. Power Supply Sensor State
Name
powerSupplySensorState
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.11
Description
Defines the state reported by the power supply sensor, and supplements
the state and settings of the power supply.
Syntax
DellPowerSupplySensorState (Power Supply Sensor State)
Access
Read-only
Table 1665. Power Supply Configuration Error Type
Name
powerSupplyConfigurationErrorType
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.12
Description
Defines the type of configuration error reported by the power supply
sensor.
Syntax
DellPowerSupplyConfigurationErrorType (Power Supply Configuration
Error Type)
Access
Read-only
Table 1666. Power Supply Power Monitor Capable
Name
powerSupplyPowerMonitorCapable
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.13
Description
Defines a boolean value that reports whether the power supply is
capable of monitoring power consumption.
Syntax
DellBoolean
431
Access
Read-only
Table 1667. Power Supply Rated Input Wattage
Name
powerSupplyRatedInputWattage
Object ID
1.3.6.1.4.1.674.10892.1.600.12.1.14
Description
Defines the rated input wattage of the power supply (in tenths of Watts.)
Syntax
DellSigned32BitRange
Access
Read-only
Power Supply Connection Table
This table describes the connection between each power supply on the managed system and its
enclosure. Each enclosure number in the table corresponds to that enclosure instance in the enclosure
Table.
The following object sets up the Power Supply Connection Table.
Table 1668. Power Supply Connection Table
Name
powerSupplyConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10
Description
Defines the power supply connection table.
Syntax
SEQUENCE OF PowerSupplyConnectionEntry
Access
Not accessible
Table 1669. Power Supply Connection Entry
Name
powerSupplyConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1
Description
Defines the power supply connection table entry.
Syntax
PowerSupplyConnectionEntry
Access
Not accessible
Index
powerSupplyConnectionNumber
Table 1670. Power Supply Connection Number
Name
powerSupplyConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1.1
Description
Identifies the instance number of the power supply connection entry.
Syntax
Integer
Access
Read-only
432
Table 1671. Power Supply Connection Power Supply Name
Name
powerSupplyConnectionPowerSupplyName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1.2
Description
Identifies the name of the power supply in this connection as
represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1672. Power Supply Connection Power Supply Number
Name
powerSupplyConnectionPowerSupplyNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1.3
Description
Identifies the instance number of the power supply in the
powerSupplyTable in the connection.
Syntax
Integer
Access
Read-only
Table 1673. Power Supply Connection Enclosure Name
Name
powerSupplyConnectionEnclosureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1.4
Description
Identifies the name of the enclosure as represented in Storage
Management to which this power supply belongs.
Syntax
DisplayString
Access
Read-only
Table 1674. Power Supply Connection Enclosure Number
Name
powerSupplyConnectionEnclosureNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1.5
Description
Identifies the instance number of the enclosure in the enclosureTable to
which this power supply belongs.
Syntax
Integer
Access
Read-only
Table 1675. Power Supply Connection Firmware Version
Name
powerSupplyConnectionFirmwareVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.10.1.6
Description
Displays power supply connection firmware version.
433
NOTE:
Available above 1.04 firmware version.
Syntax
DisplayString
Access
Read-only
Temperature Probe Table
Table 1676. Temperature Probe Table
Name
temperatureProbeTable
Object ID
1.3.6.1.4.1.674.10892.1.700.20
Description
Defines the Temperature Probe Table.
Syntax
TemperatureProbeTableEntry
Access
Not accessible
Table 1677. Temperature Probe Table Entry
Name
temperatureProbeTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1
Description
Defines the Temperature Probe Table entry.
Syntax
TemperatureProbeTableEntry
Access
Not accessible
Index
temperatureProbechassisIndex
,
temperatureProbeIndex
Table 1678. Temperature Probe Chassis Index
Name
temperatureProbechassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.1
Description
Defines the index (one-based) of this chassis.
Syntax
DellObjectRange
Access
Read-only
Table 1679. Temperature Probe Index
Name
temperatureProbeIndex
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.2
Description
Defines the index of temperature probes in this chassis.
Syntax
DellObjectRange
Access
Read-only
434
Table 1680. Temperature Probe State Capabilities
Name
temperatureProbeStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.3
Description
Defines the capabilities of the temperature probe.
Syntax
DellStateCapabilities
Access
Read-only
Table 1681. Temperature Probe State Settings
Name
temperatureProbeStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.4
Description
Defines the state and settings of the temperature probe.
Syntax
DellStateSettings
Access
Read-only
Table 1682. Temperature Probe Status
Name
temperatureProbeStatus
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.5
Description
Defines the status of the temperature probe in tenths of degrees
Celsius.
Syntax
DellStatusProbe
Access
Read-only
Table 1683. Temperature Probe Reading
Name
temperatureProbeReading
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.6
Description
Defines the value of the temperature probe.
When the value for temperatureProbeType is other than
temperatureProbeTypeIsDiscrete, the value returned for this attribute is
the temperature that the probe is reading in tenths of degrees
Centigrade. When the value for temperatureProbeType is
temperatureProbeTypeIsDiscrete, a value is not returned for this
attribute.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1684. Temperature Probe Type
Name
temperatureProbeType
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.7
Description
Defines the temperature probe type.
Syntax
DellTemperatureProbeType (Temperature Probe Type)
435
Access
Read-only
Table 1685. Temperature Probe Location Name
Name
temperatureProbeLocationName
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.8
Description
Defines the location of the temperature probe in this chassis.
Syntax
DellString
Access
Read-only
Table 1686. Temperature Probe Upper Nonrecoverable Threshold
Name
temperatureProbeUpperNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.9
Description
Defines the value of the temperature probe’s upper nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1687. Temperature Probe Upper Critical Threshold
Name
temperatureProbeUpperCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.10
Description
Defines the value of the temperature probe’s upper critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1688. Temperature Probe Upper Noncritical Threshold
Name
temperatureProbeUpperNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.11
Description
Defines the user-assigned value of the temperature probe’s upper
noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1689. Temperature Probe Lower Noncritical Threshold
Name
temperatureProbeLowerNonCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.12
Description
Defines the user-assigned value of the temperature probe’s lower
noncritical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
436
Table 1690. Temperature Probe Lower Critical Threshold
Name
temperatureProbeLowerCriticalThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.13
Description
Defines the value of the temperature probe’s lower critical threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1691. Temperature Probe Lower Nonrecoverable Threshold
Name
temperatureProbeLowerNonRecoverableThreshold
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.14
Description
Defines the value of the temperature probe’s lower nonrecoverable
threshold.
Syntax
DellSigned32BitRange
Access
Read-only
Table 1692. Temperature Probe Probe Capabilities
Name
temperatureProbeProbeCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.15
Description
Defines the probe capabilities of the temperature probe.
Syntax
DellProbeCapabilities
Access
Read-only
Table 1693. Temperature Probe Discrete Reading
Name
temperatureProbeDiscreteReading
Object ID
1.3.6.1.4.1.674.10892.1.700.20.1.16
Description
Defines the reading for a temperature probe of type
temperatureProbeTypeIsDiscrete.
When the value for temperatureProbeType is other than
temperatureProbeTypeIsDiscrete, a value is not returned for this
attribute. When the value for temperatureProbeType is
temperatureProbeTypeIsDiscrete, the value returned for this attribute is
the discrete reading for the probe.
Syntax
DellTemperatureDiscreteReading (Temperature Probe Discrete Reading)
Access
Read-only
Temperature Probe Connection Table
This table describes the connection between each temperature probe on the managed system and its
enclosure. Each enclosure number in the table corresponds to that enclosure instance in the enclosure
Table.
The following object sets up the Temperature Probe Connection Table.
437
Table 1694. Temperature Probe Connection Table
Name
temperatureConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12
Description
Defines the temperature probe connection table.
Syntax
SEQUENCE OF TemperatureConnectionEntry
Access
Not accessible
Table 1695. Temperature Probe Connection Entry
Name
temperatureConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12.1
Description
Defines the temperature probe connection table entry. ber
Syntax
TemperatureConnectionEntry
Access
Not accessible
Index
temperatureConnectionNumber
Table 1696. Temperature Probe Connection Number
Name
temperatureConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12.1.1
Description
Identifies the instance number of the temperature probe connection
entry.
Syntax
Integer
Access
Read-only
Table 1697. Temperature Probe Connection Temperature Probe Name
Name
temperatureConnectionTemperatureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12.1.2
Description
Identifies the name of the temperature probe in this connection as
represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1698. Temperature Probe Connection Temperature Probe Number
Name
temperatureConnectionTemperatureNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12.1.3
Description
Identifies the instance number in the temperatureTable of the
temperature probe in this connection.
438
Syntax
Integer
Access
Read-only
Table 1699. Temperature Probe Connection Enclosure Name
Name
temperatureConnectionEnclosureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12.1.4
Description
Identifies the name of the enclosure as represented in Storage
Management to which this temperature probe belongs.
Syntax
DisplayString
Access
Read-only
Table 1700. Temperature Probe Connection Enclosure Number
Name
temperatureConnectionEnclosureNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.12.1.5
Description
Identifies the instance number of the enclosure in the enclosureTable to
which this temperature probe belongs.
Syntax
Integer
Access
Read-only
Enclosure Management Module Table
This table describes available properties for each enclosure management module on the managed
system.
The following object sets up the Enclosure Management Module Table.
Table 1701. Enclosure Management Module Table
Name
enclosureManagementModuleTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13
Description
Defines the enclosure management module table.
Syntax
SEQUENCE OF EnclosureManagementModuleEntry
Access
Not accessible
Table 1702. Enclosure Management Module Entry
Name
EnclosureManagementModuleEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1
Description
Defines the enclosure management module table entry.
Syntax
EnclosureManagementModuleEntry
Access
Not accessible
439
Index
enclosureManagementModuleNumber
Table 1703. Enclosure Management Module Number
Name
enclosureManagementModuleNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.1
Description
Identifies the instance number of the enclosure management module
entry.
Syntax
Integer
Access
Read-only
Table 1704. Enclosure Management Module Name
Name
enclosureManagementModuleName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.2
Description
Identifies the enclosure management module's name as represented in
Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1705. Enclosure Management Module Vendor
Name
enclosureManagementModuleVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.3
Description
Identifies the enclosure management module's (re)seller's name.
Syntax
DisplayString
Access
Read-only
Table 1706. Enclosure Management Module State
Name
enclosureManagementModuleState
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.4
Description
Identifies the current state of the enclosure management module.
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
5: Not Installed
6: Degraded
21: Missing
Syntax
440
Integer
Access
Read-only
Table 1707. Enclosure Management Module Severity
Name
enclosureManagementModuleSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.5
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
Integer
Access
Read-only
Table 1708. Enclosure Management Module Part Number
Name
enclosureManagementModulePartNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.6
Description
Identifies the part number of the enclosure memory module.
Syntax
Display String
Access
Read-only
Table 1709. Enclosure Management Module Type
Name
enclosureManagementModuleType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.7
Description
Identifies the type of the enclosure management module.
Possible values:
0: Unknown
1: EMM
2: Termination Card
Syntax
Integer
Access
Read-only
Table 1710. Enclosure Management Module Firmware Version
Name
enclosureManagementModuleFWVersion
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.8
Description
Identifies the firmware version of the enclosure memory module.
Syntax
DisplayString
Access
Read-only
441
Table 1711. Enclosure Management Module Maximum Speed
Name
enclosureManagementModuleMaxSpeed
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.9
Description
Identifies the maximum bus speed of the enclosure management
module.
Syntax
DisplayString
Access
Read-only
Table 1712. Enclosure Management Module Roll-Up Status
Name
enclosureManagementModuleRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.10
Description
Severity of the enclosure management module state. This is the
combined status of the EMM and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1713. Enclosure Management Module Component Status
Name
enclosureManagementModuleComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.11
Description
The status of the enclosure management module itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
442
Table 1714. Enclosure Management Module Nexus ID
Name
enclosureManagementModuleNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.12
Description
Durable unique ID for this EMM.
Syntax
DisplayString
Access
Read-only
Table 1715. Enclosure Management Module Revision
Name
enclosureManagementModuleRevision
Object ID
1.3.6.1.4.1.674.10893.1.20.130.13.1.13
Description
Identifies the revision number of the enclosure management module.
Syntax
DisplayString
Access
Read-only
Enclosure Management Module Connection Table
This table describes the connection between each enclosure management module on the managed
system and its enclosure. Each enclosure number in the table corresponds to that enclosure instance in
the enclosure Table.
The following object sets up the Enclosure Management Module Connection Table.
Table 1716. Enclosure Management Module Connection Table
Name
enclosureManagementModuleConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14
Description
Defines the enclosure memory module connection table.
Syntax
SEQUENCE OF EnclosureManagementModuleConnectionEntry
Access
Not accessible
Table 1717. Enclosure Management Module Connection Entry
Name
enclosureManagementModuleConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14.1
Description
Defines the enclosure memory module connection table entry.
Syntax
EnclosureManagementModuleConnectionEntry
Access Not
accessible
Index
enclosureManagementModuleConnectionNumber
443
Table 1718. Enclosure Management Module Connection Number
Name
enclosureManagementModuleConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14.1.1
Description
Identifies the instance number of the enclosure memory module
connection entry.
Syntax
Integer
Access
Read-only
Table 1719. Enclosure Management Module Connection EMM Name
Name
enclosureManagementModuleConnectionEMMName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14.1.2
Description
Identifies the name of the enclosure memory module in this connection
as represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1720. Enclosure Management Module Connection EMM Number
Name
enclosureManagementModuleConnectionEMMNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14.1.3
Description
Identifies the instance number in the
enclosureManagementModuleTable of the enclosure memory module
in this connection.
Syntax
Integer
Access
Read-only
Table 1721. Enclosure Management Module Connection Enclosure Name
Name
enclosureManagementModuleConnectionEnclosureName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14.1.4
Description
Identifies the name of the enclosure as represented in Storage
Management to which this enclosure memory module belongs.
Syntax
DisplayString
Access
Read-only
Table 1722. Enclosure Management Module Connection Enclosure Number
Name
enclosureManagementModuleConnectionEnclosure Number
Object ID
1.3.6.1.4.1.674.10893.1.20.130.14.1.5
444
Description
Identifies the instance number of the enclosure in the enclosureTable to
which this enclosure memory module belongs.
Syntax
Integer
Access
Read-only
Battery Table
Table 1723. Battery Table
Name
batteryTable
Object ID
1.3.6.1.4.1.674.10892.1.600.50
Description
Defines the Battery Table.
Syntax
SEQUENCE OF BatteryTableEntry
Access
Not accessible
Table 1724. Battery Table Entry
Name
batteryTableEntry
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1
Description
Defines the Battery Table Entry.
Syntax
BatteryTableEntry
Access
Not accessible
Index
batteryChassisIndex , batteryIndex
Table 1725. Battery Chassis Index
Name
batteryChassisIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.1
Description
Defines the index (one-based) of the chassis that contains the battery.
Syntax
DellObjectRange
Access
Read-only
Table 1726. Battery Index
Name
batteryIndex
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.2
Description
Defines the index (one-based) of the battery.
Syntax
DellObjectRange
Access
Read-only
Table 1727. Battery State Capabilities
Name
batteryStateCapabilities
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.3
445
Description
Defines the state capabilities of the battery.
Syntax
DellStateCapabilities
Access
Read-only
Table 1728. Battery State Settings
Name
batteryStateSettings
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.4
Description
Defines the state settings of the battery.
Syntax
DellStateSettings
Access
Read-only
Table 1729. Battery Status
Name
batteryStatus
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.5
Description
Defines the status of the battery.
Syntax
DellStatus
Access
Read-only
Table 1730. Battery Reading
Name
batteryReading
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.6
Description
Defines the reading of the battery.
Syntax
DellBatteryReading (Battery Reading)
Access
Read-only
Table 1731. Battery Location Name
Name
batteryLocationName
Object ID
1.3.6.1.4.1.674.10892.1.600.50.1.7
Description
Defines the location of the battery.
Syntax
DellString
Access
Read-only
Battery Connection Table
This table describes the connection between each controller battery on the managed system and its
controller. Each controller number in the table corresponds to that controller instance in the controller
Table.
The following object sets up the Battery Connection Table.
446
Table 1732. Battery Connection Table
Name
batteryConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16
Description
Defines the battery connection table.
Syntax
SEQUENCE OF BatteryConnectionEntry
Access
Not accessible
Table 1733. Battery Connection Entry
Name
batteryConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16.1
Description
Defines the battery connection table entry.
Syntax
BatteryConnectionEntry
Access
BatteryConnectionEntry
Index
BatteryConnectionNumber
Table 1734. Battery Connection Number
Name
batteryConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16.1.1
Description
Identifies the instance number of the battery connection entry.
Syntax
Integer
Access
Read-only
Table 1735. Battery Connection Battery Name
Name
batteryConnectionBatteryName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16.1.2
Description
Identifies the name of the battery in this connection as represented in
Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1736. Battery Connection Battery Number
Name
batteryConnectionBatteryNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16.1.3
Description
Identifies the instance number in the batteryTable of the battery in this
connection.
Syntax
Integer
447
Access
Read-only
Table 1737. Battery Connection Controller Name
Name
batteryConnectionControllerName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16.1.4
Description
Identifies the name of the controller as represented in Storage
Management to which this battery belongs.
Syntax
DisplayString
Access
Read-only
Table 1738. Battery Connection Controller Number
Name
batteryConnectionControllerNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.16.1.5
Description
Identifies instance number of the controller in the controllerTable to
which this battery belongs.
Syntax
Integer
Access
Read-only
Tape Drive Table
This table describes available properties for each tape drive on the managed system.
The following object sets up the Tape Drive Table.
Table 1739. Tape Drive Table
Name
tapeDriveTable
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17
Description
A table of listed Tape Drives The number of entries is related to number
of Tape Drives discovered in the system. The maximum number of
entries is implementation dependent.
NOTE: The properties in this table may not be applicable to all
entries.
Syntax
SEQUENCE OF TapeDriveEntry
Access
Not accessible
Table 1740. Tape Drive Entry
Name
tapeDriveEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1
Description
An entry in the Tape Library table. A row in this table cannot be created
or deleted by SNMP operations on columns of the table.
Syntax
TapeDriveEntry
448
Access
Not accessible
Table 1741. Tape Drive Number
Name
tapeDriveNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.1
Description
Instance number of this tape drive entry.
Syntax
INTEGER
Access
Read-only
Table 1742. Tape Drive Name
Name
tapeDriveName
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.2
Description
The name of the tape drive as represented in Storage Management.
Syntax
DisplayString
Access
Read-only
Table 1743. Tape Drive Vendor
Name
tapeDriveVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.3
Description
The tape drive's manufacturer's name.
Syntax
DisplayString
Access
Read-only
Table 1744. Tape Drive Product ID
Name
tapeDriveProductID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.4
Description
The model number of the tape drive.
Syntax
DisplayString
Access
Read-only
Table 1745. Tape Drive Nexus ID
Name
tapeDriveNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.5
Description
Durable unique ID for this tape drive
Syntax
DisplayString
449
Access
Read-only
Table 1746. Tape Drive Bus Type
Name
tapeDriveBusType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.6
Description
The bus type of the tape drive.
Possible values: 8. SAS
Syntax
INTEGER
Access
Read-only
Table 1747. Tape Drive SAS Address
Name
tapeDriveSASAddress
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.7
Description
The specified SAS address if this is a SAS tape drive.
Syntax
DisplayString
Access
Read-only
Table 1748. Tape Drive Media Type
Name
tapeDriveMediaType
Object ID
1.3.6.1.4.1.674.10893.1.20.130.17.1.8
Description
The Media type of the tape drive.
Possible Values: 4: Tape
Syntax
INTEGER
Access
Read-only
Logical Devices Group
The Logical Devices Management Information Base (MIB) group provides information about the logical
devices managed by the Dell Storage Management Software and their relationships to each other.This
group and all of its associated tables and objects are not supported on Microsoft Windows Advanced
Server Limited Edition 64-bit operating system (Windows.Net-64) on a Dell PowerEdge 7150. The
following MIB tables define objects and relationships, or connections among the objects, in the Logical
Devices Group:
•
Virtual Disk Table — describes available properties for each virtual disk on the managed system.
•
Virtual Disk Partition -- describes the available properties for each disk partitions on the managed
system.
•
Array Disk Logical Connection Table — describes the connections between array disks, the virtual
disk to which they belong, and their associated logical disk. For each object in the table, its object
number corresponds to an instance number in the appropriate MIB table for that object where all of
the object properties can be found.
450
Virtual Disk Table
This table describes available properties for each virtual disk on the managed system.
The following object sets up the Virtual Disk Table.
Table 1749. Virtual Disk Table
Name
virtualDiskTable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1
Description
Defines the virtual disk table.
Syntax
SEQUENCE OF VirtualDiskEntry
Access
Not accessible
Table 1750. Virtual Disk Entry
Name
virtualDiskEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1
Description
Defines the virtual disk table entry.
Syntax
VirtualDiskEntry
Access
Not accessible
Index
virtualDiskNumber
Table 1751. Virtual Disk Number
Name
virtualDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.1
Description
Identifies the instance number of the virtual disk entry.
Syntax
INTEGER
Access
Read-only
Table 1752. Virtual Disk Name
Name
virtualDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.2
Description
Identifies the virtual disk's label generated by Storage Management or
entered by the user.
Syntax
DisplayString
Access
Read-only
451
Table 1753. Virtual Device Disk Name
Name
virtualDiskDeviceName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.3
Description
Identifies the device name used by this virtual disk's member disks.
Syntax
DisplayString
Access
Read-only
Table 1754. Virtual Disk State
Name
virtualDiskState
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.4
Description
Identifies the current state of this virtual disk.
Possible states:
0: Unknown
1: Ready - The disk is accessible and has no known problems.
2: Failed - The data on the virtual disk is no longer fault tolerant because
one of the underlying disks is not online.
3: Online
4: Offline - The disk is not accessible. The disk may be corrupted or
intermittently unavailable.
6: Degraded - The data on the virtual disk is no longer fault tolerant
because one of the underlying disks is not online.
15: Resynching
16: Regenerating
24: Rebuilding
26: Formatting
32: Reconstructing
35: Initializing
36: Background Initialization
38: Resynching Paused
52: Permanently Degraded
54: Degraded Redundancy
Syntax
INTEGER
Access
Read-only
Table 1755. Virtual Disk Severity
Name
virtualDiskSeverity
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.5
Description
This entry is obsolete for Storage Management. It was replaced with
RollUpStatus and ComponentStatus for each device.
Syntax
INTEGER
452
Access
Read-only
Table 1756. Virtual Disk Length in Megabytes
Name
virtualDiskLengthInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.6
Description
Identifies the size of this virtual disk in megabytes. If this size is 0, it is
smaller than a megabyte.
Syntax
INTEGER
Access
Read-only
Table 1757. Virtual Disk Length in Bytes
Name
virtualDiskLengthBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.7
Description
Identifies the portion of the virtual disk in bytes that is smaller than a
megabyte. This size plus the virtualDiskLengthInMB is the total size of
the virtual disk.
Syntax
INTEGER
Access
Read-only
Table 1758. Virtual Disk Free Space in Megabytes
Name
virtualDiskFreeSpaceInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.8
Description
This entry is obsolete. This property is not supported by virtual disks
managed under Storage Management.
Syntax
INTEGER
Access
Read-only
Table 1759. Virtual Disk Free Space in Bytes
Name
virtualDiskFreeSpaceInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.9
Description
This entry is obsolete. This property is not supported by virtual disks
managed under Storage Management.
Syntax
INTEGER
Access
Read-only
Table 1760. Virtual Disk Write Policy
Name
virtualDiskWritePolicy
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.10
453
Description
Indicates whether the controller's write cache are used when writing to
a virtual disk.
Possible values:
1: Enabled - Adaptec Write Cache Enabled Protected
2: Disabled - Adaptec Write Cache Disabled
3: LSI Write Back
4: LSI Write Through
5: Enabled Always (Adaptec only)
6: Enabled Always (SAS only)
9: Not Applicable
Syntax
INTEGER
Access
Read-only
Table 1761. Virtual Disk Read Policy
Name
virtualDiskReadPolicy
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.11
Description
Indicates whether the controller's read cache are used when reading
from a virtual disk.
Possible values:
1: Enabled - Adaptec Read Cache Enabled
2: Disabled - Adaptec Read Cache Disabled
3: LSI Read Ahead
4: LSI Adaptive Read Ahead
5: LSI No Read Ahead
9: Not Applicable
Syntax
INTEGER
Access
Read-only
Table 1762. Virtual Disk Cache Policy
Name
virtualDiskCachePolicy
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.12
Description
Indicates whether the controller's cache is used when reading from or
writing to a virtual disk. Possible values: 1: Direct I/O (LSI) 2: Cached I/O
(LSI) 99: Not Applicable
Syntax
INTEGER
Access
Read-only
Table 1763. Virtual Disk Layout
Name
virtualDiskLayout
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.13
454
Description
Indicates the virtual disk's RAID type. Possible values: 1: Concatenated 2:
RAID-0 3: RAID-1 7: RAID-5 8: RAID-6 10: RAID-10 12: RAID-50 19:
Concatenated RAID 1 24: RAID-60 25: CacheCade
Syntax
INTEGER
Access
Read-only
Table 1764. Virtual Disk Current Stripe Size in Megabytes
Name
virtualDiskCurStripeSizeInMB
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.14
Description
Identifies the stripe size of this virtual disk in megabytes. If this size is 0,
it is smaller than a megabyte.
Syntax
INTEGER
Access
Read-only
Table 1765. Virtual Disk Current Stripe Size in Bytes
Name
virtualDiskCurStripeSizeInBytes
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.15
Description
Identifies the portion of the stripe size in bytes that is smaller than a
megabyte. This size plus the virtualDiskCurStripeSizeInMB is the total
stripe size on the virtual disk.
Syntax
INTEGER
Access
Read-only
Table 1766. Virtual Disk Channel
Name
virtualDiskChannel
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.16
Description
This entry is obsolete. This property is not supported by virtual disks
managed under Storage Management.
Syntax
INTEGER
Access
Read-only
Table 1767. Virtual Disk Target ID
Name
virtualDiskTargetID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.17
Description
Unique ID for the virtual disk.
Syntax
INTEGER
Access
Read-only
455
Table 1768. Virtual Disk LUN ID
Name
virtualDiskLunID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.18
Description
This entry is obsolete. This property is not supported by virtual disks
managed under Storage Management.
Syntax
INTEGER
Access
Read-only
Table 1769. Virtual Disk Roll-Up Status
Name
virtualDiskRollUpStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.19
Description
Severity of the virtual disk state. This is the combined status of the virtual
disk and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
Table 1770. Virtual Disk Component Status
Name
virtualDiskComponentStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.20
Description
The status of the virtual disk itself without the propagation of any
contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
DellStatus
Access
Read-only
456
Table 1771. Virtual Disk Nexus ID
Name
virtualDiskNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.21
Description
Durable unique ID for this virtual disk.
Syntax
DisplayString
Access
Read-only
Table 1772. Virtual Disk Array Disk Type
Name
virtualDiskArrayDiskType
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.22
Description
Identifies the type of array (physical) disks used to create the virtual disk.
Possible values:
1: SAS
2: SATA
3: SCSI
4: IDE
99: Unknown
Syntax
INTEGER
Access
Read-only
Table 1773. Virtual Disk Bad Blocks Detected
Name
virtualDiskBadBlocksDetected
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.23
Description
Indicates if virtual disk has bad blocks.
Value: 0 - No, 1 - Yes, 2 - Not Applicable, 99 - Unknown
Syntax
INTEGER
Access
Read-only
Table 1774. Virtual Disk Encrypted
Name
virtualDiskEncrypted
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.24
Description
Indicates if virtual disk is encrypted.
Value: 0 - No, 1 - Yes, 99 - Unknown
Syntax
INTEGER
Access
Read-only
457
Table 1775. Virtual Disk is CacheCade
Name
virtualDiskIsCacheCade
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.25
Description
Indicates if this virtual disk is configured as CacheCade.
Value: 1 - Yes, 0 - No, 99 - Undetermined
Syntax
INTEGER
Access
Read-only
Table 1776. Virtual Disk Disk Cache Policy
Name
virtualDiskDiskCachePolicy
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.26
Description
Indicates disk cache policy of the logical device.
Value: 1 - Enabled, 2 - Disabled, 99 - Undetermined
Syntax
INTEGER
Access
Read-only
Table 1777. Virtual Disk Associated Fluid Cache Status
Name
virtualDiskAssociatedFluidCacheStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.27
Description
Indicates the status of the associated fluid cache.
Syntax
INTEGER
Access
Read-only
Table 1778. Virtual Disk PI Enable
Name
virtualDiskPIEnable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.1.1.28
Description
Indicates if T10 PI is enabled on a virtual disk.
Possible values are:
0 : T10 PI disabled, 1 : T10 PI enabled
Syntax
INTEGER
Access
Read-only
Virtual Disk Partition
Table 1779. Virtual Disk Partition Table
Name
virtualDiskPartitionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2
458
Description
A table of managed virtual disk partitions. The number of entries is
related to number of partitions discovered in the system. The maximum
number of entries is implementation dependent.
NOTE: The properties in this table may not be applicable to all
entries.
Syntax
SEQUENCE OF VirtualDiskPartitionEntry
Access
Not-Accessible
Table 1780. Virtual Disk Partition Entry
Name
virtualDiskPartitionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1
Description
An entry in the Virtual Disk Partition table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Syntax
VirtualDiskPartitionEntry
Access
Not—Accessible
Table 1781. Virtual Disk Partition Number
Name
virtualDiskPartitionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1.1
Description
Instance number of this partition entry.
Syntax
INTEGER
Access
Read-only
Table 1782. Virtual Disk Partition Device Name
Name
virtualDiskPartitionDeviceName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1.2
Description
Device name of the partition given by the operating system.
Syntax
OCTET STRING
Access
Read-only
Table 1783. Virtual Disk Partition State
Name
virtualDiskPartitionState
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1.3
Description
State of the partition. This is mapped stated of the associate virtual disk.
•
•
•
•
Syntax
Active - Mapped cache disk is working fine.
No - Fluid cache is not enabled.
Removing - This is a transient stage during the process of disabling
the cache.
Failed - Mapped cache disk has failed.
INTEGER
459
Access
Read-only
Table 1784. Virtual Disk Partition Size
Name
virtualDiskPartitionSize
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1.4
Description
Size of the partition in GB.
Syntax
INTEGER
Access
Read-only
Table 1785. Virtual Disk Partition Fluid Cache Status
Name
virtualDiskPartitionFluidCacheStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1.5
Description
Indicates if the partition has associated fluid cache.
Syntax
OCTET STRING
Access
Read-only
Table 1786. Virtual Disk Partition Nexus ID
Name
virtualDiskPartitionNexusID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.2.1.6
Description
Durable unique ID for this partition. This comprises the controllerID,
virtualDisk ID and hash mapped WWN number of this partition.
Syntax
DisplayString
Access
Read-only
Fluid Cache Table
Table 1787. Fluid Cache Table
Name
fluidCacheTable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4
Description
A table of managed FluidCache. The number of entries is related to
FluidCache discovered in the system. The maximum number of entries
is implementation dependent.
NOTE: The properties in this table may not be applicable to all
entries.
Syntax
SEQUENCE OF FluidCacheEntry
Access
Not-Accessible
Table 1788. Fluid Cache Entry
Name
fluidCacheEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1
460
Description
An entry in the Fluid Cache table. A row in this table cannot be created
or deleted by SNMP operations on columns of the table.
Syntax
FluidCacheEntry
Access
Not-Accessible
Table 1789. Fluid Cache Number
Name
fluidCacheNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.1
Description
Instance number of this fluid cache entry.
Syntax
INTEGER
Access
Read-only
Table 1790. Fluid Cache Name
Name
fluidCacheName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.2
Description
The name of the fluid cache in this subsystem as represented in Storage
Management.
Syntax
OCTET STRING
Access
Read-only
Table 1791. Fluid Cache License State
Name
fluidCacheLicenseState
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.3
Description
License state of the associated fluid cache subsystem.
Syntax
OCTET STRING
Access
Read-only
Table 1792. Fluid Cache License Validity
Name
fluidCacheLicenseValidity
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.4
Description
This entry displays the number of days the fluid cache license is valid. It
has to be read in parallel to license type. For state-wide licenses, the
value zero should be read as Not Applicable.
Syntax
INTEGER
Access
Read-only
Table 1793. Fluid Cache License Entitlement ID
Name
fluidCacheLicenseEntitlementID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.5
461
Description
Indicates the Entitlement Identifier for the license of the fluid cache
subsystem.
Syntax
OCTET STRING
Access
Read-only
Table 1794. Fluid Cache License Duration
Name
fluidCacheLicenseDuration
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.6
Description
Indicates the duration of the license validity.
Syntax
OCTET STRING
Access
Read-Only
Table 1795. Fluid Cache License Capacity
Name
fluidCacheLicenseCapacity
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.7
Description
Indicates the capacity of the license of fluid cache subsystem.
Syntax
OCTET STRING
Access
Read-only
Table 1796. Fluid Cache License Remaining
Name
fluidCacheLicenseRemaining
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.8
Description
Indicates the remaining days of the license validity.
Syntax
OCTET STRING
Access
Read-only
Table 1797. Fluid Cache License Type
Name
fluidCacheLicenseType
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.9
Description
Indicates the type of the license of the fluid cache subsystem.
Syntax
OCTET STRING
Access
Read-only
Table 1798. Fluid Cache License Vendor
Name
fluidCacheLicenseVendor
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.10
Description
Indicates the license vendor for the fluid cache subsystem.
Syntax
OCTET STRING
462
Access
Read-only
Table 1799. Fluid Cache License Product ID
Name
fluidCacheLicenseProductId
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.11
Description
Indicates the product ID of the license of the fluid cache susbsytem.
Syntax
OCTET STRING
Access
Read-only
Table 1800. Fluid Cache License Date Sold
Name
fluidCacheLicenseDateSold
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.12
Description
Indicates the date on which the license for the fluid cache subsystem is
sold.
Syntax
OCTET STRING
Access
Read-only
Table 1801. Fluid Cache License Generation
Name
fluidCacheLicenseGeneration
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.13
Description
Indicates the generation of the license for the fluid cache subsystem.
Syntax
OCTET STRING
Access
Read-only
Table 1802. Fluid Cache License Feature ID
Name
fluidCacheLicenseFeatureID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.14
Description
Indicates the license feature ID of the fluid cache subsystem.
Syntax
OCTET STRING
Access
Read-only
Table 1803. Fluid Cache License Feature Description
Name
fluidCacheLicenseFeatureDescription
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.15
Description
Provides the description of the license feature of fluid cache subsystem.
Syntax
OCTET STRING
Access
Read-only
463
Table 1804. Fluid Cache Nexus
Name
fluidCacheNexus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.4.1.16
Description
Indicates the unique ID of the fluid cache component.
Syntax
OCTET STRING
Access
Read-only
Fluid Cache Disk
Table 1805. Fluid Cache Disk Table
Name
fluidCacheDiskTable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5
Syntax
SEQUENCE OF FluidCacheDiskEntry
Access
Not-Accessible
Table 1806. Fluid Cache Disk Entry
Name
fluidCacheDiskEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1
Syntax
FluidCacheDiskEntry
Access
Not-Accessible
Table 1807. Fluid Cache Disk Number
Name
fluidCacheDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.1
Description
Instance number of the fluidCacheDisk entry.
Syntax
INTEGER
Access
Read-only
Table 1808. Fluid Cache Disk Name
Name
fluidCacheDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.2
Description
Name of the Fluid Cache Disk Name as seen by storage management.
Syntax
OCTET STRING
Access
Read-only
Table 1809. Fluid Cache Disk State
Name
fluidCacheDiskState
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.3
Description
State of the FluidCacheDisk entry.
464
Valid values are 2 - Active, otherwise Inactive
Syntax
INTEGER
Access
Read-only
Table 1810. Fluid Cache Disk Backend Device Type
Name
fluidCacheDiskBackendDeviceType
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.4
Description
This displays the type of the backend device beneath the fluid cache
disk.
Values are as below
773 denotes VirtualDisk
791 denotes Partition
Syntax
INTEGER
Access
Read-only
Table 1811. Fluid Cache Disk Backend Device Name
Name
fluidCacheDiskBackendDeviceName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.5
Description
Device name of the backend device as seen by the operating system.
Syntax
OCTET STRING
Access
Read-only
Table 1812. Fluid Cache Disk Backend Device Size
Name
fluidCacheDiskBackendDeviceSize
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.6
Description
Size of the Backend device. Size is indicated in GB.
Syntax
INTEGER
Access
Read-Only
Table 1813. Fluid Cache Disk Operating Mode
Name
fluidCacheDiskOperatingMode
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.7
Description
Operating mode of the FluidCache. Values are
•
•
•
0 - Writeback mode
1 - Writethrough mode
2 - PassThrough mode
Syntax
INTEGER
Access
Read-only
465
Table 1814. Fluid Cache Disk Configured Mode
Name
fluidCacheDiskConfiguredMode
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.8
Description
Configured Mode of the FluidCache. The values are :
•
•
•
0 - Writeback mode
1 - Writethrough mode
2 - PassThrough mode
Syntax
INTEGER
Access
Read-Only
Table 1815. Fluid Cache Disk Nexus
Name
fluidCacheDiskNexus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.9
Description
Durable Unique ID of the fluidcache disk.
Syntax
OCTET STRING
Access
Read-only
Table 1816. Fluid Cache Disk Status
Name
fluidCacheDiskStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.5.1.10
Description
Severity of the fluid cache disk state.
Possible values:
•
•
•
•
•
•
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6 : Non-recoverable
Syntax
INTEGER
Access
Read-only
Fluid Cache Pool Table
Table 1817. Fluid Cache Pool Table
Name
fluidCachePoolTable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6
Syntax
SEQUENCE OF FluidCachePoolEntry
Access
Not-Accessible
466
Table 1818. Fluid Cache Pool Entry
Name
fluidCachePoolEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1
Syntax
FluidCachePoolEntry
Access
Not-Accessible
Table 1819. Fluid Cache Pool Number
Name
fluidCacheDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.1
Description
Instance number of the fluid cache pool entry.
Syntax
INTEGER
Access
Read-only
Table 1820. Fluid Cache Pool Store Count
Name
fluidCachePoolStoreCount
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.2
Description
Number of flash devices that are part of the fluid cache pool.
Syntax
INTEGER
Access
Read-only
Table 1821. Fluid Cache Pool UUID
Name
fluidCachePoolUUID
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.3
Description
UUID of the fluid cache pool.
Syntax
OCTET STRING
Access
Read-only
Table 1822. Fluid Cache Pool License State
Name
fluidCachePoolLicenseState
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.4
Description
License state of the fluid cache system.
Syntax
OCTET STRING
Access
Read-only
Table 1823. Fluid Cache Pool Size
Name
fluidCachePoolSize
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.5
Description
Size of the fluid cache pool in GiB.
467
Syntax
INTEGER
Access
Read-only
Table 1824. Fluid Cache Pool High Availability State
Name
fluidCachePoolHighAvailabilityState
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.6
Description
Indicates if the fluid cache pool is operating in high availability mode.
Syntax
OCTET STRING
Access
Read-Only
Table 1825. Fluid Cache Pool Nexus
Name
fluidCachePoolNexus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.7
Description
Durable unique ID of the fluid cache pool entry.
Syntax
OCTET STRING
Access
Read-only
Table 1826. Fluid Cache Pool Status
Name
fluidCachePoolStatus
Object ID
1.3.6.1.4.1.674.10893.1.20.140.6.1.8
Description
Severity of the fluid cache pool table state.
Possible values:
•
•
•
•
•
•
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Syntax
INTEGER
Access
Read-only
Array Disk Logical Connection Table
This table describes the connections between array disks, the virtual disk to which they belong, and their
associated logical disk. For each object in the table, its object number corresponds to an instance
number in the appropriate MIB table for that object where all of the object properties can be found.
The following object sets up the Array Disk Logical Connection Table.
Table 1827. Array Disk Logical Connection Table
Name
arrayDiskLogicalConnectionTable
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3
468
Description
Defines the array disk logical connection table.
Syntax
SEQUENCE OF arrayDiskLogicalConnectionEntry
Access
Not accessible
Table 1828. Array Disk Logical Connection Entry
Name
arrayDiskLogicalConnectionEntry
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1
Description
Defines the array disk logical connection table entry.
Syntax
ArrayDiskLogicalConnectionEntry
Access
Not accessible
Index
arrayDiskLogicalConnectionNumber
Table 1829. Array Disk Logical Connection Number
Name
arrayDiskLogicalConnectionNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.1
Description
Identifies the instance number of the disk entry.
Syntax
Integer
Access
Read-only
Table 1830. Array Disk Logical Connection Array Disk Name
Name
arrayDiskLogicalConnectionArrayDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.2
Description
Identifies the name of the array disk in this logical connection.
Syntax
DisplayString
Access
Read-only
Table 1831. Array Disk Logical Connection Array Disk Number
Name
arrayDiskLogicalConnectionArrayDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.3
Description
Identifies the instance number of the array disk in this logical
connection.
Syntax
Integer
Access
Read-only
469
Table 1832. Array Disk Logical Connection Virtual Disk Name
Name
arrayDiskLogicalConnectionVirtualDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.4
Description
Identifies the name of the virtual disk to which this array disk belongs.
Syntax
DisplayString
Access
Read-only
Table 1833. Array Disk Logical Connection Virtual Disk Number
Name
arrayDiskLogicalConnectionVirtualDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.5
Description
Identifies the instance number of the virtual disk to which this array disk
belongs.
Syntax
Integer
Access
Read-only
Table 1834. Array Disk Logical Connection Disk Name
Name
arrayDiskLogicalConnectionDiskName
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.6
Description
Identifies the name of the disk group to which this array disk belongs.
This property is currently not supported.
Syntax
DisplayString
Access
Read-only
Table 1835. Array Disk Logical Connection Disk Number
Name
arrayDiskLogicalConnectionDiskNumber
Object ID
1.3.6.1.4.1.674.10893.1.20.140.3.1.7
Description
Identifies the instance number of the disk group to which this array disk
belongs. This property is currently not supported.
Syntax
Integer
Access
Read-only
Storage Management Event Group
The Storage Management Event Group defines the properties that are sent with SNMP traps.
Table 1836. Message ID Event
Name
messageIDEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.1
470
Description
Storage Management event message number.
Syntax
Integer
Access
Read-only
Table 1837. Description Event
Name
descriptionEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.2
Description
Storage Management event message text describing the alert.
Syntax
DisplayString
Access
Read-only
Table 1838. Location Event
Name
locationEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.3
Description
Additional information identifying the location of the object causing the
alert.
Syntax
DisplayString
Access
Read-only
Table 1839. Object Name Event
Name
objectNameEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.4
Description
Name of the object as represented in Storage Management causing the
alert.
Syntax
DisplayString
Access
Read-only
Table 1840. Object OID Event
Name
objectOIDEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.5
Description
MIB OID of the object causing the alert.
Syntax
DisplayString
Access
Read-only
Table 1841. Object Nexus Event
Name
objectNexusEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.6
471
Description
Durable, unique ID of the object causing the alert.
Syntax
DisplayString
Access
Read-only
Table 1842. Current Status Event
Name
currentStatusEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.7
Description
Current status of object causing the alert, if applicable.
Syntax
DellStatus
Access
Read-only
Table 1843. Previous Status Event
Name
previousStatusEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.8
Description
Previous status of object causing the alert if applicable.
Syntax
DellStatus
Access
Read-only
472
Change Management Group
4
The Change Management Group lets you monitor information about the Dell devices and software that
are present on a particular managed computer chassis. This information is collected during an inventory
scan.
NOTE: On systems running Linux, the optional srvadmin-cm RPM package must be installed for Dell
OpenManage Server Administrator to respond to SNMP queries in this group. See the Server
Administrator Installation Guide for more information.
Inventory Group
The following objects describe the fields for inventory information.
Table 1844. Inventory Locale
Name
inventoryLocale
Object ID
1.3.6.1.4.1.674.10899.1.1
Description
Defines the locale of the system.
Syntax
DisplayString
Access
Read-only
Table 1845. Inventory Schema Version
Name
inventorySchemaVersion
Object ID
1.3.6.1.4.1.674.10899.1.2
Description
Defines the inventory schema implemented by this system.
Syntax
DisplayString
Access
Read-only
Table 1846. Inventory System ID
Name
inventorySystemID
Object ID
1.3.6.1.4.1.674.10899.1.3
Description
Defines the System ID for the system.
Syntax
SystemID
Access
Read-only
Device Group
The Device Group defines information about the devices discovered on the system during an inventory
scan. Identifying information includes the Component ID, the Device ID, and the Vendor ID.
473
Device Group Table
The following object sets up the Device Group Table.
Table 1847. Device Table
Name
deviceTable
Object ID
1.3.6.1.4.1.674.10899.1.5
Description
Defines the Device Table.
Syntax
SEQUENCE OF DeviceEntry
Access
Not accessible
Table 1848. Device Entry
Name
deviceEntry
Object ID
1.3.6.1.4.1.674.10899.1.5.1
Description
Defines a device entry.
Syntax
DeviceEntry
Access
Not accessible
Table 1849. Device Index
Name
deviceIndex
Object ID
1.3.6.1.4.1.674.10899.1.5.1.1
Description
Defines the unique index for this device.
Syntax
Unsigned16BitRange
Access
Read-only
Table 1850. Device Component ID
Name
deviceComponentID
Object ID
1.3.6.1.4.1.674.10899.1.5.1.2
Description
Defines an optional component ID field for the device.
Syntax
Integer
Access
Read-only
Table 1851. Device Display String
Name
deviceDisplayString
Object ID
1.3.6.1.4.1.674.10899.1.5.1.3
Description
Provides a displayable string that describes the device.
Syntax
DisplayString
Access
Read-only
474
Table 1852. Device Vendor ID
Name
deviceVendorID
Object ID
1.3.6.1.4.1.674.10899.1.5.1.4
Description
Defines the ID for the vendor supplying the device.
Syntax
Octet String
Access
Read-only
Table 1853. Device ID
Name
deviceDeviceID
Object ID
1.3.6.1.4.1.674.10899.1.5.1.5
Description
Defines the ID for the device.
Syntax
Octet String
Access
Read-only
Table 1854. Device Sub ID
Name
deviceSubID
Object ID
1.3.6.1.4.1.674.10899.1.5.1.6
Description
Provides additional device identification.
Syntax
Octet String
Access
Read-only
Table 1855. Device Sub Vendor ID
Name
deviceSubVendorID
Object ID
1.3.6.1.4.1.674.10899.1.5.1.7
Description
Provides additional vendor identification.
Syntax
Octet String
Access
Read-only
Application Group
NOTE: Dell updateable components such as Basic input/output system (BIOS) and FirmWare (FW)
are considered applications. For example, the following would be returned for system BIOS:
Application/DisplayString = BIOS Application/Version = A10
The Application Group defines information about the applications discovered on the system during an
inventory scan. Identifying information includes the application type, the application version, and the
application description.
Application Group Table
The following object sets up the Application Group Table
475
Table 1856. Application Table
Name
applicationTable
Object ID
1.3.6.1.4.1.674.10899.1.6
Description
Defines a table of application information for the system.
Syntax
Defines a table of application information for the system.
Access
Not accessible
Table 1857. Application Entry
Name
applicationEntry
Object ID
1.3.6.1.4.1.674.10899.1.6.1
Description
Defines an application entry.
Syntax
ApplicationEntry
Access
Read-only
Table 1858. Application Index
Name
aplicationIndex
Object ID
1.3.6.1.4.1.674.10899.1.6.1.1
Description
Defines the unique index for this application.
Syntax
Unsigned16BitRange
Access
Read-only
Table 1859. Application Device Index
Name
applicationDeviceIndex
Object ID
1.3.6.1.4.1.674.10899.1.6.1.2
Description
Defines a cross-index to the device table for the application.
Syntax
Unsigned16BitRange
Access
Read-only
Table 1860. Application Component Type
Name
applicationComponentType
Object ID
1.3.6.1.4.1.674.10899.1.6.1.3
Description
Identifies the type of application reported.
Syntax
DisplayString
Access
Read-only
Table 1861. Application Version
Name
applicationVersion
Object ID
1.3.6.1.4.1.674.10899.1.6.1.4
476
Description
Identifies the version of the application.
Syntax
DisplayString
Access
Read-only
Table 1862. Application Display String
Name
aplicationDisplayString
Object ID
1.3.6.1.4.1.674.10899.1.6.1.5
Description
A user visible display string that describes the application.
Syntax
DisplayString
Access
Read-only
Table 1863. Application Sub-Component ID
Name
applicationSubComponentID
Object ID
1.3.6.1.4.1.674.10899.1.6.1.6
Description
The sub-component ID for the application. This is usually valid on ESM
device reporting.
Syntax
DisplayString
Access
Read-only
Operating System Group
The Operating System Group provides status and identifying information about a system’s operating
system. Identifying information includes the name, version, and service pack of the installed operating
system.
The following objects describe the fields for Operating System Group.
Inventory Collector Product Information
The following objects describe the fields for the Inventory Collector. The Inventory Collector product
variables are scalar objects, meaning that they are not related to other Inventory Collector base (MIB)
objects and are thus not placed in a table.
477
478
Chassis Management Controller Group
5
Dell Remote Access Controller Out-of-Band Group
The Dell Remote Access Controller Out-of-Band MIB contains information for both Chassis Management
Controller (CMC) and RAC Legacy Alerting. This MIB consists of information for the following groups:
Product Information
The following MIB attributes provide product information for the chassis management controller:
Table 1864. DRsProductName
Name
drsProductName
Object ID
1.3.6.1.4.1.674.10892.2.1.1.1
Description
Defines the product name of a chassis management controller.
Syntax
DellString
Access
Read-only
Table 1865. DRsProductShortName
Name
drsProductShortName
Object ID
1.3.6.1.4.1.674.10892.2.1.1.2
Description
Defines the short product name of a chassis management controller.
Syntax
DellString
Access
Read-only
Table 1866. DRsProductDescription
Name
drsProductDescription
Object ID
1.3.6.1.4.1.674.10892.2.1.1.3
Description
Defines the product description of a chassis management controller.
Syntax
DellString
Access
Read-only
Table 1867. DRsProductManufacturer
Name
drsProductManufacturer
Object ID
1.3.6.1.4.1.674.10892.2.1.1.4
Description
Defines the product manufacturer of a chassis management controller.
Syntax
DellString
479
Access
Read-only
Table 1868. DRsProductVersion
Name
drsProductVersion
Object ID
1.3.6.1.4.1.674.10892.2.1.1.5
Description
Defines the product version of a chassis management controller.
Syntax
DellString
Access
Read-only
Table 1869. DRsChassisServiceTag
Name
drsChassisServiceTag
Object ID
1.3.6.1.4.1.674.10892.2.1.1.6
Description
Defines the Service Tag of the chassis.
Syntax
DellString
Access
Read-only
Table 1870. DRsProductURL
Name
drsProductURL
Object ID
1.3.6.1.4.1.674.10892.2.1.1.7
Description
Defines the out-of-band UI URL of a chassis management controller.
Syntax
DellString
Access
Read-only
Table 1871. DRsProductChassisAssetTag
Name
drsProductChassisAssetTag
Object ID
1.3.6.1.4.1.674.10892.2.1.1.8
Description
Defines the Asset Tag of the chassis.
Syntax
DellString
Access
Read-only
Table 1872. DRsProductChassisLocation
Name
drsProductChassisLocation
Object ID
1.3.6.1.4.1.674.10892.2.1.1.9
Description
Defines the location of the chassis.
Syntax
DellString
Access
Read-only
480
Table 1873. DRsProductChassisName
Name
drsProductChassisName
Object ID
1.3.6.1.4.1.674.10892.2.1.1.10
Description
Defines the name of the chassis.
Syntax
DellString
Access
Read-only
Table 1874. DRsSystemServiceTag
Name
drsSystemServiceTag
Object ID
1.3.6.1.4.1.674.10892.2.1.1.11
Description
Defines the service tag of a system.
Syntax
DellString
Access
Read-only
Table 1875. DRsProductSystemAssetTag
Name
drsProductSystemAssetTag
Object ID
1.3.6.1.4.1.674.10892.2.1.1.12
Description
Defines the asset tag of a system.
Syntax
DellString
Access
Read-only
Table 1876. DRsProductSystemSlot
Name
drsProductSystemSlot
Object ID
1.3.6.1.4.1.674.10892.2.1.1.13
Description
Defines the slot number of a CMC.
Syntax
DellString
Access
Read-only
Table 1877. DRsProductType
Name
drsProductType
Object ID
1.3.6.1.4.1.674.10892.2.1.1.14
Description
Defines type of a remote access card.
Syntax
DellRacType
Access
Read-only
Table 1878. DRsProductChassisDataCenter
Name
drsProductChassisDataCenter
Object ID
1.3.6.1.4.1.674.10892.2.1.1.15
481
Description
Defines the data center locator of the chassis.
Syntax
DellString
Access
Read-only
Table 1879. DRsProductChassisAisle
Name
drsProductChassisAisle
Object ID
1.3.6.1.4.1.674.10892.2.1.1.16
Description
Defines the aisle locator of the chassis.
Syntax
DellString
Access
Read-only
Table 1880. DRsProductChassisRack
Name
drsProductChassisRack
Object ID
1.3.6.1.4.1.674.10892.2.1.1.17
Description
Defines the rack locator of the chassis.
Syntax
DellString
Access
Read-only
Table 1881. DRsProductChassisRackSlot
Name
drsProductChassisRackSlot
Object ID
1.3.6.1.4.1.674.10892.2.1.1.18
Description
Defines the rack slot locator of the chassis.
Syntax
DellString
Access
Read-only
Table 1882. DRsProductChassisModel
Name
drsProductChassisModel
Object ID
1.3.6.1.4.1.674.10892.2.1.1.19
Description
Defines the model of the chassis.
Syntax
DellString
Access
Read-only
Table 1883. DRsProductChassisExpressServiceCode
Name
drsProductChassisExpressServiceCode
Object ID
1.3.6.1.4.1.674.10892.2.1.1.20
Description
Defines the express service code of the chassis.
Syntax
DellString
Access
Read-only
482
Table 1884. DRsProductChassisSystemID
Name
drsProductChassisSystemID
Object ID
1.3.6.1.4.1.674.10892.2.1.1.21
Description
Defines the system ID of the chassis.
Syntax
INTEGER
Access
Read-only
Table 1885. DRsFirmwareVersion
Name
drsFirmwareVersion
Object ID
1.3.6.1.4.1.674.10892.2.1.2.1
Description
Defines the firmware version of a chassis management controller 1.
Syntax
DellString
Access
Read-only
Table 1886. DRsiKVMFirmwareVersion
Name
drsiKVMFirmwareVersion
Object ID
1.3.6.1.4.1.674.10892.2.1.2.2
Description
Defines the firmware version of the iKVM.
Syntax
DellString
Access
Read-only
Table 1887. DRsFirmwareVersion2
Name
drsFirmwareVersion2
Object ID
1.3.6.1.4.1.674.10892.2.1.2.3
Description
Defines the firmware version of chassis management controller 2.
Syntax
DellString
Access
Read-only
Chassis Status
The following MIB attributes provide status information on the chassis being monitored by the chassis
management controller.
Table 1888. DRsGlobalSystemStatus
Name
drsGlobalSystemStatus
Object ID
1.3.6.1.4.1.674.10892.2.2.1
Description
Defines the overall chassis status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
483
Table 1889. DRsGlobalCurrStatus
Name
drsGlobalCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.1
Description
Defines the overall chassis status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1890. DRsIOMCurrStatus
Name
drsIOMCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.2
Description
Defines the IOM subsystem status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1891. DRsKVMCurrStatus
Name
drsKVMCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.3
Description
Defines the iKVM subsystem health status being monitored by the
chassis management card.
Syntax
DellStatus
Access
Read-only
Table 1892. DRsRedCurrStatus
Name
drsRedCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.4
Description
Defines the redundancy status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1893. DRsPowerCurrStatus
Name
drsPowerCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.5
Description
Defines the power subsystem health status being monitored by the
chassis management card.
Syntax
DellStatus
Access
Read-only
484
Table 1894. DRsFanCurrStatus
Name
drsFanCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.6
Description
Defines the fan subsystem health status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1895. DRsBladeCurrStatus
Name
drsBladeCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.7
Description
Defines the blade subsystem health status being monitored by the
chassis management card.
Syntax
DellStatus
Access
Read-only
Table 1896. DRsTempCurrStatus
Name
drsTempCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.8
Description
Defines the temperature sensor subsystem health status being
monitored by the chassis management card.
Syntax
DellStatus
Access
Read-only
Table 1897. DRsCMCCurrStatus
Name
drsCMCCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.1.9
Description
Defines the CMC health status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1898. DRsChassisFrontPanelAmbientTemperature
Name
drsChassisFrontPanelAmbientTemperature
Object ID
1.3.6.1.4.1.674.10892.2.3.1.10
Description
Defines the ambient temperature reading (in degrees Celsius) for the
chassis front panel controller.
Syntax
DellTemperatureReading
Access
Read-only
485
Table 1899. DRsCMAmbientTemperature
Name
drsCMCAmbientTemperature
Object ID
1.3.6.1.4.1.674.10892.2.3.1.11
Description
Defines the ambient temperature reading (in degrees Celsius) for the
chassis management card.
Syntax
DellTemperatureReading
Access
Read-only
Table 1900. DRsCMProcessorTemperature
Name
drsCMCProcessorTemperature
Object ID
1.3.6.1.4.1.674.10892.2.3.1.12
Description
Defines the temperature reading (in degrees Celsius) for the chassis
management card processor.
Syntax
DellTemperatureReading
Access
Read-only
Table 1901. DRsGlobalPrevStatus
Name
drsGlobalPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.1
Description
Defines the previous chassis status recorded by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1902. DRsIOMPrevStatus
Name
drsIOMPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.2
Description
Defines the previous IOM subsystem status recorded by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1903. DRsKVMPrevStatus
Name
drsKVMPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.3
Description
Defines the previous iKVM subsystem health status recorded by the
chassis management card.
Syntax
DellStatus
Access
Read-only
486
Table 1904. DRsRedPrevStatus
Name
drsRedPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.4
Description
Defines the previous redundancy status recorded by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1905. DRsPowerPrevStatus
Name
drsPowerPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.5
Description
Defines the previous power subsystem health status recorded by the
chassis management card.
Syntax
DellStatus
Access
Read-only
Table 1906. DRsFanPrevStatus
Name
drsFanPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.6
Description
Defines the previous fan health status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1907. DRsBladePrevStatus
Name
drsBladePrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.7
Description
Defines the previous blade subsystem health status recorded by the
chassis management card.
Syntax
DellStatus
Access
Read-only
Table 1908. DRsTempPrevStatus
Name
drsTempPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.8
Description
Defines the temperature sensor health status being monitored by the
chassis management card.
Syntax
DellStatus
Access
Read-only
487
Table 1909. DRsCMCPrevStatus
Name
drsCMCPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.3.2.9
Description
Defines the CMC health status being monitored by the chassis
management card.
Syntax
DellStatus
Access
Read-only
Table 1910. DRsGlobalChangeTime
Name
drsGlobalChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.1
Description
Defines the timestamp of the most recent global status change.
Syntax
TimeTicks
Access
Read-only
Table 1911. DRsIOMChangeTime
Name
drsIOMChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.2
Description
Defines the timestamp of the most recent IOM status change.
Syntax
TimeTicks
Access
Read-only
Table 1912. DRsKVMChangeTime
Name
drsKVMChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.3
Description
Defines the timestamp of the most recent iKVM status change.
Syntax
TimeTicks
Access
Read-only
Table 1913. DRsRedChangeTime
Name
drsRedChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.4
Description
Defines the timestamp of the most recent Redundancy status change.
Syntax
TimeTicks
Access
Read-only
Table 1914. DRsPowerChangeTime
Name
drsPowerChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.5
488
Description
Defines the timestamp of the most recent power health status change.
Syntax
TimeTicks
Access
Read-only
Table 1915. DRsFanChangeTime
Name
drsFanChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.6
Description
Defines the timestamp of the most recent fan health status change.
Syntax
TimeTicks
Access
Read-only
Table 1916. DRsBladeChangeTime
Name
drsBladeChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.7
Description
Defines the timestamp of the most recent blade health status change.
Syntax
TimeTicks
Access
Read-only
Table 1917. DRsTempChangeTime
Name
drsTempChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.8
Description
Defines the timestamp of the most recent temperature sensor health
status change.
Syntax
TimeTicks
Access
Read-only
Table 1918. DRsCMCChangeTime
Name
drsCMCChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.3.3.9
Description
Defines the timestamp of the most recent CMC health status change.
Syntax
TimeTicks
Access
Read-only
Chassis Power
The following MIB tables provide power information for the chassis being monitored by the chassis
management controller.
Table 1919. DRsCMC Power Table
Name
drsCMCPowerTable
Object ID
1.3.6.1.4.1.674.10892.2.4.1
489
Description
Defines the CMC power table.
Syntax
SEQUENCE OF DrsCMCPowerTableEntry
Access
Not-accessible
Table 1920. DRsCMC Power Table Entry
Name
drsCMCPowerTableEntry
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1
Description
Defines the CMC power table entry.
Syntax
DrsCMCPowerTableEntry
Access
Not-accessible
Table 1921. DRsCMC PSUTable
Name
drsCMCPSUTable
Object ID
1.3.6.1.4.1.674.10892.2.4.2
Description
Defines the CMC PSU table.
Syntax
SEQUENCE OF DrsCMCPSUTableEntry
Access
Not-accessible
Table 1922. DRsCMC PSUTableEntry
Name
drsCMCPSUTableEntry
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1
Description
Defines the CMC PSU table entry.
Syntax
DrsCMCPSUTableEntry
Access
Not-accessible
CMC Power Information
The following MIB tables provide information on the chassis power.
Table 1923. DRsChassisIndex
Name
drsChassisIndex
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellCMCPowerIndexRange
Access
Read-only
Table 1924. DRsPotentialPower
Name
drsPotentialPower
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.2
490
Description
Defines the power (in watts) required by the chassis infrastructure, along
with the maximum power requirements for all systems currently turned
on.
Syntax
DellPowerReading
Access
Read-only
Table 1925. DRsIdlePower
Name
drsIdlePower
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.3
Description
Defines the power (in watts) required by the chassis infrastructure, along
with the minimum power requirements for all systems currently turned
on.
Syntax
DellPowerReading
Access
Read-only
Table 1926. DRsMaxPowerSpecification
Name
drsMaxPowerSpecification
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.4
Description
Defines the power limit (in watts) at which server throttling takes place.
Syntax
DellPowerReading
Access
Read-only
Table 1927. DRsPowerSurplus
Name
drsPowerSurplus
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.5
Description
Defines the power surplus (in watts) remaining above the
drsPotentialPower reading.
Syntax
DellPowerReading
Access
Read-only
Table 1928. DRsKWhCumulative
Name
drsKWhCumulative
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.6
Description
Defines the cumulative chassis power usage (in KWh) since last reset.
Syntax
DellPowerReading
Access
Read-only
Table 1929. DRsKWhCumulativeTime
Name
drsKWhCumulativeTime
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.7
491
Description
Defines the timestamp of the most recent chassis power accumulator
reset.
Syntax
DellTimestamp
Access
Read-only
Table 1930. DRsWattsPeakUsage
Name
drsWattsPeakUsage
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.8
Description
Defines the chassis peak power usage (in watts) since last reset.
Syntax
DellPowerReading
Access
Read-only
Table 1931. DRsWattsPeakTime
Name
drsWattsPeakTime
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.9
Description
Defines the timestamp of the most recent chassis peak power usage.
Syntax
DellTimestamp
Access
Read-only
Table 1932. DRsWattsMinUsage
Name
drsWattsMinUsage
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.10
Description
Defines the chassis minimum power usage (in watts) since last reset.
Syntax
DellPowerReading
Access
Read-only
Table 1933. DRsWattsMinTime
Name
drsWattsMinTime
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.11
Description
Defines the time stamp of the most recent chassis minimum power
usage.
Syntax
DellPowerReading
Access
Read-only
Table 1934. DRsWattsResetTime
Name
drsWattsResetTime
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.12
Description
Defines the time stamp of the most recent reset of the chassis
minimum/maximum watts readings.
492
Syntax
DellTimestamp
Access
Read-only
Table 1935. DRsWattsReading
Name
drsWattsReading
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.13
Description
Defines the instantaneous chassis power usage (in watts).
Syntax
DellPowerReading
Access
Read-only
Table 1936. DRsAmpsReading
Name
drsAmpsReading
Object ID
1.3.6.1.4.1.674.10892.2.4.1.1.14
Description
Defines the instantaneous chassis current usage (in watts).
Syntax
DellPowerReading
Access
Read-only
CMC PSU Information
The following MIB tables provide information on the chassis power supply units.
Table 1937. DRsPSUChassisIndex
Name
drsPSUChassisIndex
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.1
Description
Defines the index (one-based) of the associated chassis.
Syntax
DellCMCPowerIndexRange
Access
Read-only
Table 1938. DRsPSUIndex
Name
drsPSUIndex
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.2
Description
Defines the index (one-based) of the associated CMC PSU.
Syntax
DellCMCPSUIndexRange
Access
Read-only
Table 1939. DRsPSULocation
Name
drsPSULocation
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.3
Description
Defines the location of the CMC PSU.
Syntax
DellString
493
Access
Read-only
Table 1940. DRsPSUMonitoringCapable
Name
drsPSUMonitoringCapable
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.4
Description
Defines the monitoring capabilities or the absence of a PSU in this
location.
Syntax
DellCMCPSUCapable
Access
Read-only
Table 1941. DRsPSUVoltsReading
Name
drsPSUVoltsReading
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.5
Description
Defines the instantaneous PSU voltage reading.
Syntax
DellPowerReading
Access
Read-only
Table 1942. DRsPSUAmpsReading
Name
drsPSUAmpsReading
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.6
Description
Defines the instantaneous PSU current reading.
Syntax
DellPowerReading
Access
Read-only
Table 1943. DRsPSUWattsReading
Name
drsPSUWattsReading
Object ID
1.3.6.1.4.1.674.10892.2.4.2.1.7
Description
Defines the instantaneous PSU wattage reading.
Syntax
DellPowerReading
Access
Read-only
Chassis Servers
The following MIB tables provide server information for the chassis being monitored by the chassis
management controller.
Table 1944. DRsCMCServerTable
Name
drsCMCServerTable
Object ID
1.3.6.1.4.1.674.10892.2.5.1
Description
Defines the CMC server table.
494
Syntax
SEQUENCE OF DrsCMCServerTableEntry
Access
Not-Accessible
Table 1945. DRsCMCServerTableEntry
Name
drsCMCServerTableEntry
Object ID
1.3.6.1.4.1.674.10892.2.5.1.1
Description
Defines the CMC server table entry.
Syntax
DrsCMCServerTableEntry
Access
Not-Accessible
CMC Server Information
The following MIB tables provide CMC server information being monitored by the chassis management
controller.
Table 1946. DRsServerIndex
Name
drsServerIndex
Object ID
1.3.6.1.4.1.674.10892.2.5.1.1.1
Description
Defines the index (one-based) of the associated CMC server.
Syntax
DellCMCServerIndexRange
Access
Read-only
Table 1947. DRsServerMonitoringCapable
Name
drsServerMonitoringCapable
Object ID
1.3.6.1.4.1.674.10892.2.5.1.1.2
Description
Defines the monitoring capabilities, or the absence of a server in this
location.
Syntax
DellCMCServerCapable
Access
Read-only
Table 1948. DRsServerServiceTag
Name
drsServerServiceTag
Object ID
1.3.6.1.4.1.674.10892.2.5.1.1.3
Description
Defines the Service Tag of the CMC server.
Syntax
DellString
Access
Read-only
495
Table 1949. DRsServerSlotName
Name
drsServerSlotName
Object ID
1.3.6.1.4.1.674.10892.2.5.1.1.4
Description
Defines the slot name of the CMC server.
Syntax
DellString
Access
Read-only
Table 1950. DRsServerSlotNumber
Name
drsServerSlotNumber
Object ID
1.3.6.1.4.1.674.10892.2.5.1.1.5
Description
Defines the chassis slot number of the CMC server.
Syntax
DellString
Access
Read-only
Chassis Alert
The following MIB tables provide information on the chassis management controller alerts.
Table 1951. DRsCASubSystem
Name
drsCASubSystem
Object ID
1.3.6.1.4.1.674.10892.2.20.10.1
Description
Defines the subsystem name of the CMC Alert.
Syntax
DellString
Access
Read-only
Table 1952. DrsCASSCurrStatus
Name
drsCASSCurrStatus
Object ID
1.3.6.1.4.1.674.10892.2.20.10.2
Description
Defines the current status of the alerting subsystem.
Syntax
DellStatus
Access
Read-only
Table 1953. DrsCASSPrevStatus
Name
drsCASSPrevStatus
Object ID
1.3.6.1.4.1.674.10892.2.20.10.3
Description
Defines the previous status of the alerting subsystem.
Syntax
DellStatus
Access
Read-only
496
Table 1954. DrsCASSChangeTime
Name
drsCASSChangeTime
Object ID
1.3.6.1.4.1.674.10892.2.20.10.4
Description
Defines the time stamp of the most recent change of the alerting
subsystem.
Syntax
TimeTicks
Access
Read-only
Table 1955. DrsCAMessage
Name
drsCAMessage
Object ID
1.3.6.1.4.1.674.10892.2.20.10.5
Description
Defines the CSSD message of the CMC alert.
Syntax
DellString
Access
Read-only
Chassis Alert 2
Table 1956. DRsCA2MessageID
Name
drsCA2MessageID
Object ID
1.3.6.1.4.1.674.10892.2.21.10.1
Description
Defines the message ID of the alert.
Syntax
DisplayString
Access
Read-only
Table 1957. DrsCA2Message
Name
drsCA2Message
Object ID
1.3.6.1.4.1.674.10892.2.21.10.2
Description
Defines the message describing the alert.
Syntax
DellString
Access
Read-only
Table 1958. DrsCA2MessageArgs
Name
drsCA2MessageArgs
Object ID
1.3.6.1.4.1.674.10892.2.21.10.3
Description
Defines the concatenated set of strings that represent the message
arguments that are used to construct the alert message. The message
argument strings are enclosed within double quotes and are separated
with a comma. Double quotes used within the message argument
strings are preprocessed and changed to single quotes.
497
Syntax
DellString
Access
Read-only
Table 1959. DrsCA2AlertStatus
Name
drsCA2AlertStatus
Object ID
1.3.6.1.4.1.674.10892.2.21.10.4
Description
Defines the status of the alert.
Syntax
DellStatus
Access
Read-only
Table 1960. DrsCA2FQDD
Name
drsCA2FQDD
Object ID
1.3.6.1.4.1.674.10892.2.21.10.5
Description
Defines the fully qualified device descriptor of device causing the alert.
Syntax
DisplayString
Access
Read-only
Legacy Alerting
The following MIB tables provide information on the RAC legacy alerting.
Table 1961. DRsAlertSystem
Name
drsAlertSystem
Object ID
1.3.6.1.4.1.674.10892.2.5000.10.1
Description
Name of the system generating the alert.
Syntax
Octet String
Access
Read-only
Table 1962. DRsAlertTableIndexOID
Name
drsAlertTableIndexOID
Object ID
1.3.6.1.4.1.674.10892.2.5000.10.2
Description
Alert Index Object Identifier.
Syntax
OBJECT IDENTIFIER
Access
Read-only
Table 1963. DRsAlertMessage
Name
drsAlertMessage
Object ID
1.3.6.1.4.1.674.10892.2.5000.10.3
Description
Message describing the alert.
498
Syntax
Octet String
Access
Read-only
Table 1964. DRsAlertCurrentStatus
Name
drsAlertCurrentStatus
Object ID
1.3.6.1.4.1.674.10892.2.5000.10.4
Description
Current status of object causing the alert.
Syntax
DellStatus
Access
Read-only
Table 1965. DRsAlertPreviousStatus
Name
drsAlertPreviousStatus
Object ID
1.3.6.1.4.1.674.10892.2.5000.10.5
Description
Previous status of object causing the alert.
Syntax
DellStatus
Access
Read-only
Table 1966. DRsAlertData
Name
drsAlertData
Object ID
1.3.6.1.4.1.674.10892.2.5000.10.6
Description
Alert data
Syntax
Octet String
Access
Read-only
499
500
6
SNMP Traps
SNMP is frequently used to monitor systems for fault conditions such as temperature violations, hard
drive failures, and so on. Management applications can monitor for these conditions by polling the
appropriate OIDs with the Get command and analyzing the returned data. This method has its drawbacks.
If it is done frequently, significant amounts of network bandwidth can be consumed. If it is done
infrequently, the response to the fault condition may not occur in a timely fashion. SNMP traps avoid
these limitations of the polling method.
An SNMP trap is an asynchronous event indicating that something significant has occurred. This is
analogous to a pager receiving an important message, except that the SNMP trap frequently contains all
the information needed to diagnose a fault.
Two drawbacks to SNMP traps are that they are sent using UDP, which is not a guaranteed delivery
mechanism, and that they are not acknowledged by the receiver.
An SNMP trap message contains the trap’s enterprise OID, the agent IP address, a generic trap ID, the
specific trap ID, a time stamp, and zero or more variable bindings (varbinds). The combination of an
enterprise OID and a specific trap ID uniquely identifies each Server Administrator-defined trap. A varbind
consists of an OID and its value and provides additional information about the trap.
In order for a management system to receive SNMP traps from a managed system, the node must be
configured to send traps to the management system. Trap destination configuration is dependent on the
operating system. When this configuration is done, a management application on the management
system can wait for traps and act on them when received.
For a list of traps supported by the Server Administrator Instrumentation Service, see Instrumentation
Traps. For information on Server Administrator Storage Management traps, see Storage Management
Alert Reference.
For a list of traps supported by the Remote Access Controller, see RAC Traps, BMC Traps and iDRAC7
Traps.
Trap Variables
This section describes the variables both on Traditional and Enhanced varbinds that are sent to the
management console to provide additional information about a trap or alert generated by some event on
your system. The trap variables presented here apply to all Instrumentation and RAC traps. Trap variables
are sent in the order listed and are reserved for use only in traps. When a varbind is created for a trap
variable, a zero is appended to the object ID (OID) to create the OID for the varbind.
The messages associated with each alertMessage varbind are available in the Message Reference Guide
and can be found by matching the alert ID in the MIB to the event ID in the Message Reference Guide.
Table 1967. Trap Variables
Variable Name
alertSystem
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.1
Description
Identifies the system generating the alert.
501
Syntax
DisplayString
Table 1968. Table Index OID
Variable Name
alertTableIndexOID
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.2
Description
Specifies the object identifier for the index attribute in the table that
contains the object causing the alert. Uniquely identifies the object
causing the alert and can be used to correlate different alerts caused by
the same object.
Syntax
OBJECT IDENTIFIER
Table 1969. Message
Variable Name
alertMessage
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.3
Description
Describes the alert.
Syntax
DisplayString
Table 1970. Current Status
Variable Name
alertCurrentStatus
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.4
Description
Specifies the current status of the object causing the alert.
Syntax
DellStatus
Table 1971. Previous Status
Variable Name
alertPreviousStatus
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.5
Description
Specifies the previous status of the object causing the alert.
Syntax
DellStatus
Table 1972. Data
Variable Name
alertData
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.6
Description
Provides Server Administrator-defined data related to the alert.
Syntax
Octet String
The following variables show the Enhanced varbinds:
502
Table 1973. Message ID
Variable Name
alertMsgID
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.7
Description
Specifies the enhanced message ID for the object generating the alert.
Syntax
DisplayString
Table 1974. System FQDN
Variable Name
alertSystemFQDN
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.8
Description
Specifies fully qualified domain name of the system generating the alert.
Syntax
DisplayString
Table 1975. Service Tag
Variable Name
alertServiceTag
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.9
Description
Specifies the system service tag of the system generating the alert.
Syntax
DisplayString
Table 1976. Chassis Service Tag
Variable Name
alertChassisServiceTag
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.10
Description
Specifies the chassis service tag of the system generating the alert.
Syntax
DisplayString
Understanding The Trap Description
The below table lists in alphabetical order each line item that may appear in the trap description.
Table 1977. Trap Description
Description Line Item
Explanation
Action performed was:
<Action>
Specifies the automatic server recovery action that was performed, for
example:
Action performed was: Power cycle
Action requested was:
<Action>
Specifies the user initiated host control action that was requested, for
example:
Action requested was: Reboot, shutdown OS first
Additional details:
<Additional details
for the events>
Specifies possible additional details about the specified device, for
example:
Additional details:
503
Description Line Item
Explanation
Memory device: DIMM_1A Serial number: 11111111
Memory device: DIMM_1B Serial number: 22222222
<Additional power
supply status
information>
Specifies any additional power supply information pertaining to the
event, for example:
Power supply input AC is off, Power supply POK (power
OK) signal is not normal, Power supply is turned off
Battery sensor status:
<status>
Specifies the status reported by the battery sensor, for example:
Battery sensor status: Predictive failure
Chassis intrusion
state: <Intrusion
state>
Specifies the chassis intrusion state (open or closed), for example:
Chassis intrusion state: Open
Chassis location:
<Name of chassis>
Specifies the name of the chassis that generated the message, for
example:
Chassis location: Main System Chassis
Configuration error
type: <type of
configuration error>
Specifies the type of configuration error that occurred, for example:
Configuration error type: Revision mismatch
Current sensor value
(in Amps): <Reading>
Specifies the current sensor value in amps, for example:
Current sensor value: 7.853
Date and time of
action: <Date and
time>
Specifies the date and time that an automatic server recovery action was
performed, for example:
Date and time of action: Fri May 30 23:55:44 2003.
Description:
<Description of event>
Specifies the description of the event that occurred, for example:
Description: Chipset Err: Critical Event sensor, front
panel NMI / diagnostic interrupt was asserted.
Device location:
<Location in chassis>
Specifies the location of the device in the specified chassis, for example:
Device location: Mem Card A
Discrete current
state: <State>
Specifies the state of the current sensor, for example:
Discrete current state: Good
Discrete temperature
state: <State>
Specifies the state of the temperature sensor, for example:
Discrete temperature state: Good
Discrete voltage
state: <State>
Specifies the state of the voltage sensor, for example:
Discrete voltage state: Good
Fan sensor value:
<Reading>
Specifies the fan speed in revolutions per minute (RPMs) or On/Off, for
example:
Fan sensor value (in RPM): 2600
Fan sensor value: Off
Log type: <Log type>
Specifies the type of hardware log, for example:
Log type: Embedded Server Management (ESM)
504
Description Line Item
Explanation
Memory device bank
location: <Bank name
in chassis>
Specifies the name of the memory bank in the system that generated
the message, for example:
Memory device bank location: Bank_1
Memory device
location: <Device name
in chassis>
Specifies the location of the memory module in the chassis, for
example:
Memory device location: DIMM_A
Number of devices
required for full
redundancy: <Number>
Specifies the number of power supply or cooling devices required to
achieve full redundancy, for example:
Number of devices required for full redundancy: 4
Peak value (in Watts):
<Reading>
Specifies the peak value in Watts, for example:
Peak value (in Watts): 125
Possible memory module
event cause: <list of
causes>
Specifies a list of possible causes for the memory module event, for
example:
Possible memory module event cause: Single bit warning
error rate exceeded
Single bit error logging disabled
Power Supply type:
<type of power supply>
Specifies the type of power supply, for example:
Power Supply type: VRM
Pre-failure state was:
<State>
Specifies the status of the previous memory message, for example:
Pre-failure state was: Failed
Previous redundancy
state was: <State>
Specifies the status of the previous redundancy message, for example:
Previous redundancy state was: Lost
Previous state was:
<State>
Specifies the previous state of the sensor, for example:
Previous state was: OK (Normal)
Processor sensor
status: <status>
Specifies the status of the processor sensor, for example:
Processor sensor status: Configuration error
Redundancy unit:
<Redundancy location
in chassis>
Specifies the location of the redundant power supply or cooling unit in
the chassis, for example:
Redundancy unit: Fan Enclosure
SD card device type:
<Type of SD card
device>
Specifies the type of SD card device, for example:
SD card device type: Hypervisor
SD card state: <State
of SD card>
Specifies the state of the SD card, for example:
SD card state: Present, Failed
Sensor location:
<Location in chassis>
Specifies the location of the sensor in the specified chassis, for example:
Sensor location: CPU1
Temperature sensor
value (in degrees
Celsius): <Reading>
Specifies the temperature in degrees Celsius, for example:
Temperature sensor value (in degrees Celsius): 30
Voltage sensor value
(in Volts): <Reading>
Specifies the voltage sensor value in volts, for example:
Voltage sensor value: 1.693
505
Understanding Trap Severity
Traps often contain information about values recorded by probes or sensors. Probes and sensors monitor
critical components for values such as amperage, voltage, and temperature. When an event occurs on
your system, the Server Administrator sends information about one of the following event types to the
system management console:
•
Information/Informational—An event that describes the successful operation of a unit, such as a
power supply turning on or a sensor reading returning to normal.
•
Warning — An event that is not necessarily significant, but may indicate a possible future problem,
such as crossing a warning threshold.
•
Critical/Error — A significant event that indicates actual or imminent loss of data or loss of function,
such as crossing a failure threshold or a hardware failure.
RAC Traps
This section describes the traps that are generated by the SNMP agent of the Remote Access Controller
(RAC). All of the enterprise-specific traps documented in this section belong to the MIB enterprise
identified by OID 1.3.6.1.4.1.674.10892.2 and are sent with all of the trap variables documented in the
section Traps . The trap variables are sent in the order in which they are listed.
NOTE: The PowerEdge M1000e CMC and PowerEdge VRTX CMC do not generate the traps in this
section. They generate the traps documented in the CMC Traps.
Table 1978. RAC Traps
TrapID
Name
Description
0
CodeStart
SNMP agent is Informatio
initializing
n
itself
1
Authenticati Failure
on
Request
received with
an invalid
community
name
1001
1002
506
Severity
Category
Cause
Support
ed by
RAC
Platfor
m
Status
RAC power on or reset.
All
Error
SNMP request with an
invalid community name.
All
alertDrscTe The RAC
Informatio
st TrapEvent generated a
n
test trap event
in response to
a user request
Status
A test SNMP trap
generated by a RAC.
All
alertDrscAut RAC
h Error
Authenticatio
n failures
during a time
period have
Error
RAC login failure caused
by authentication failure,
number of concurrent
logins exceed limit, or
permission denied.
All
Critical
Minor
TrapID
Name
Description
Severity
Category
Cause
Support
ed by
RAC
Platfor
m
exceeded a
threshold
1015
alertDrscSE
L
Warning The
RAC has
detected a
new event in
the System
Event Log
with Severity:
Warning
Major
Error
RAC detected a new
All
system event log with
warning severity (detailed
log info is in drsAlert
Message varbind).
1016
alertDrscSE
L
Critical The
RAC has
detected a
new event in
the System
Event Log
with Severity:
Critical
Critical
Error
RAC detected a new
system event log with
critical severity (detailed
log info is in drsAlert
Message varbind).
All
1017
alertDrscSE
L 80
percentFull
The RAC
system event
log is 80% full
Major
Status
RAC detected system
event log is 80% full.
All
1018
alertDrscSE
L 90
percentFull
The RAC
system event
log is 90% full
Major
Status
RAC detected system
event log is 90% full.
All
1018
alertDrscSE
L 90
percentFull
The RAC
system event
log is 90% full
Major
Status
RAC detected system
event log is 90% full.
All
1020
alertDrscSE
L Normal
The RAC has
detected a
new event in
the System
Event Log
with Severity:
Normal
Informatio
n
Error
RAC detected a new
system event log with
normal severity (detailed
log info is in drsAlert
Message varbind).
All
PowerEdge M1000e CMC Traps
This section describes the traps that are generated by the SNMP agent of the PowerEdge M1000e CMC.
All of the enterprise-specific traps documented in this section belong to the MIB enterprise identified by
OID 1.3.6.1.4.1.674.10892.2 and are sent with the following trap variables: drsProductChassisName,
drsProductChassisLocation, drsGlobalCurrStatus, drsCASubSystem, drsCASSCurrStatus,
507
drsCASSPrevStatus, drsCASSChangeTime and drsCAMessage. The trap variables are defined in the Dell
Remote Access Controller Out-of-Band Group section.
Table 1979. PowerEdge M1000e CMC traps
TrapID
Name
Description
Severity
Category
2000
alertCMCTestTrap
CMC has generated a
test trap.
Informational
Error Events
2002
alertCMCNormalTrap CMC reported a returnto-normal or
informational event.
Normal
Error Events
2003
alertCMCWarningTra CMC reported a warning Warning
p
event.
Error Events
2004
alertCMCCriticalTrap CMC reported a critical
event.
Critical
Error Events
2005
alertCMCNonRecove CMC reported a
rableTrap
catastrophic event.
Non-Recoverable
Error Events
PowerEdge VRTX CMC Traps
This section defines the traps that are generated by the SNMP agent of the PowerEdge VRTX CMC . All of
the enterprise-specific traps documented in this section belong to the MIB enterprise identified by OID
1.3.6.1.4.1.674.10892.2.21 and are sent with the following trap variables: drsCA2MessageID,
drsCA2Message, drsCA2MessageArgs, drsCA2AlertStatus, drsCA2FQDD, drsProductChassisName,
drsProductChassisLocation, drsChassisServiceTag and drsGlobalCurrStatus. The trap variables are defined
in the Dell Remote Access Controller Out-of-Band Group section.
System Trap Group
The System Trap Group contains traps that fall under the System event category.
Table 1980. Amperage Probe Traps
TrapID
Description
Category
SubCategory
Severity
Status Events
Amperage
Information
al
Current sensor has detected Status Events
a warning value.
Amperage
Minor
Amperage
Critical
alert2AmperageProbeNormal
2179
Current sensor reading is
within range.
alert2AmperageProbeWarning
2178
alert2AmperageProbeFailure
2177
508
Current sensor has detected Error Events
a failure value.
Table 1981. Battery Traps
TrapID
Description
Category
SubCategory
Severity
Battery state has returned to Status Events
normal; or battery presence
had been detected.
Battery
Information
al
Battery is low.
Status Events
Battery
Minor
Battery has failed or battery
is absent.
Error Events
Battery
Critical
Description
Category
SubCategory
Severity
Cable failure.
Error Events
Cable
Critical
Description
Category
SubCategory
Severity
Chassis Management
Controller detected a
warning.
Status Events
CMC
Minor
Chassis Management
Error Events
Controller detected an error.
CMC
Critical
Description
Category
SubCategory
Severity
Fan information.
Status Events
Fan
Information
al
Fan warning.
Status Events
Fan
Minor
Fan failure.
Error Events
Fan
Critical
alert2BatteryNormal
2227
alert2BatteryWarning
2226
alert2BatteryFailure
2225
Table 1982. Cable Traps
TrapID
alert2CableFailure
2393
Table 1983. CMC Traps
TrapID
alert2CMCWarning
2546
alert2CMCFailure
2545
Table 1984. Fan Traps
TrapID
alert2FanInformation
2155
alert2FanWarning
2154
alert2FanFailure
2153
509
Table 1985. Hardware Configuration Traps
TrapID
Description
Category
SubCategory
Severity
Status Events
Hardware
Configuration
Information
al
Status Events
Hardware
Configuration
Minor
Error Events
Hardware
Configuration
Critical
Category
SubCategory
Severity
Status Events
IO
Virtualization
Minor
Error Events
IO
Virtualization
Critical
Category
SubCategory
Severity
Link status information.
Status Events
Link Status
Information
al
Link status failure or critical
event.
Error Events
Link Status
Critical
Description
Category
SubCategory
Severity
Power supply has returned
to normal.
Status Events
Power Supply
Information
al
Power supply has detected a Status Events
warning.
Power Supply
Minor
alert2HardwareConfigurationInformation
2331
Hardware configuration
information.
alert2HardwareConfigurationWarning
2330
Hardware configuration
warning.
alert2HardwareConfigurationFailure
2329
Hardware configuration
failure or critical event.
Table 1986. IO Virtualization Traps
TrapID
Description
alert2IOVirtualizationWarning
2554
IO Virtualization warning.
alert2IOVirtualizationFailure
2553
IO Virtualization failure or
critical event.
Table 1987. Link Status Traps
TrapID
Description
alert2LinkStatusInformation
2251
alert2LinkStatusFailure
2249
Table 1988. Power Supply Traps
TrapID
alert2PowerSupplyNormal
2187
alert2PowerSupplyWarning
2186
510
TrapID
Description
Category
SubCategory
Severity
Power Supply
Critical
alert2PowerSupplyFailure
2185
Power supply has detected a Error Events
failure.
Table 1989. Power Supply Absent Trap
TrapID
Description
Category
SubCategory
Severity
Power supply is absent.
Error Events
Power Supply
Critical
Category
SubCategory
Severity
Status Events
Redundancy
Information
al
Redundancy is degraded.
Status Events
Redundancy
Minor
Redundancy is lost.
Error Events
Redundancy
Critical
Description
Category
SubCategory
Severity
Security information.
Status Events
Security
Information
al
Security failure or critical
event.
Error Events
Security
Critical
Category
SubCategory
Severity
Status Events
System Event
Log
Information
al
Status Events
System Event
Log
Minor
alert2PowerSupplyAbsent
2465
Table 1990. Redundancy Traps
TrapID
Description
alert2RedundancyInformation
2475
Redundancy information.
alert2RedundancyDegraded
2474
alert2RedundancyLost
2473
Table 1991. Security Event Traps
TrapID
alert2SecurityInformation
2387
alert2SecurityFailure
2385
Table 1992. System Event Log Traps
TrapID
Description
alert2SystemEventLogInformation
2379
System Event Log
information.
alert2SystemEventLogWarning
2378
System Event Log warning.
alert2SystemEventLogFailure
511
TrapID
Description
Category
SubCategory
Severity
2377
System Event Log failure or
critical event.
Error Events
System Event
Log
Critical
Category
SubCategory
Severity
Status Events
Software
Configuration
Information
al
Status Events
Software
Configuration
Minor
Category
SubCategory
Severity
Status Events
Temperature
Information
al
Status Events
Temperature
Minor
Error Events
Temperature
Critical
Description
Category
SubCategory
Severity
Voltage sensor reading is
within range.
Status Events
Voltage
Information
al
Voltage sensor has detected Status Events
a warning value.
Voltage
Minor
Voltage sensor has detected Error Events
a failure value.
Voltage
Critical
Table 1993. Software Configuration Traps
TrapID
Description
alert2SoftwareConfigurationInformation
2339
Software configuration
information.
alert2SoftwareConfigurationWarning
2338
Software configuration
warning.
Table 1994. Temperature Probe Traps
TrapID
Description
alert2TemperatureProbeNormal
2163
Temperature sensor value is
within range.
alert2TemperatureProbeWarning
2162
Temperature sensor has
detected a warning value.
alert2TemperatureProbeFailure
2161
Temperature sensor has
detected a failure value.
Table 1995. Voltage Probe Traps
TrapID
alert2VoltageProbeNormal
2171
alert2VoltageProbeWarning
2170
alert2VoltageProbeFailure
2169
Storage Trap Group
The Storage Trap Group contains traps that fall under the Storage event category.
512
Table 1996. Storage Battery Traps
TrapID
Description
Category
Subcategory
Severity
Battery
Information
al
Error Events
Battery
Minor
Error Events
Battery
Critical
Category
Subcategory
Severity
Error Events
Controller
Information
al
Error Events
Controller
Minor
Error Events
Controller
Critical
Category
Subcategory
Severity
Error Events
Enclosure
Information
al
Error Events
Enclosure
Minor
Error Events
Enclosure
Critical
Category
Subcategory
Severity
Storage fan information.
Error Events
Fan
Information
al
Storage fan warning.
Status Events
Fan
Minor
alert2StorageBatteryInformation
4275
Storage battery information. Error Events
alert2StorageBatteryWarning
4274
Storage battery warning.
alert2StorageBatteryFailure
4273
Storage battery failure.
Table 1997. Storage Controller Traps
TrapID
Description
alert2StorageControllerInformation
4331
Storage controller
information.
alert2StorageControllerWarning
4330
Storage controller warning.
alert2StorageControllerFailure
4329
Storage controller failure.
Table 1998. Storage Enclosure Traps
TrapID
Description
alert2StorageEnclosureInformation
4339
Storage enclosure
information.
alert2StorageEnclosureWarning
4338
Storage enclosure warning.
alert2StorageEnclosureFailure
4337
Storage enclosure failure.
Table 1999. Storage Fan Traps
TrapID
Description
alert2StorageFanInformation
4203
alert2StorageFanWarning
4202
513
TrapID
Description
Category
Subcategory
Severity
Storage fan failure.
Error Events
Fan
Critical
alert2StorageFanFailure
4201
Table 2000. Storage Physical Disk Traps
TrapID
Description
Category
Subcategory
Severity
Error Events
Physical Disk
Information
al
Error Events
Physical Disk
Minor
Storage physical disk failure. Error Events
Physical Disk
Critical
Category
Subcategory
Severity
Error Events
Power Supply
Information
al
Error Events
Power Supply
Minor
Error Events
Power Supply
Critical
Category
Subcategory
Severity
Error Events
Storage
Management
Information
al
Storage Management has
Error Events
detected a device
independent warning
condition. There is no global
Storage
Management
Minor
alert2StoragePhysicalDiskInformation
4347
Storage physical disk
information.
alert2StoragePhysicalDiskWarning
4346
Storage physical disk
warning.
alert2StoragePhysicalDiskFailure
4345
Table 2001. Storage Power Supply Traps
TrapID
Description
alert2StoragePowerSupplyInformation
4235
Storage power supply
information.
alert2StoragePowerSupplyWarning
4234
Storage power supply
warning.
alert2StoragePowerSupplyFailure
4233
Storage power supply
failure.
Table 2002. Storage Management Status Traps
TrapID
Description
alert2StorageManagementInformation
4179
Storage Management
information. There is no
global status change
associated with this trap.
alert2StorageManagementWarning
4178
514
TrapID
Description
Category
Subcategory
Severity
Storage
Management
Critical
Category
Subcategory
Severity
Error Events
Temperature
Probe
Information
al
Error Events
Temperature
Probe
Minor
Error Events
Temperature
Probe
Critical
Category
Subcategory
Severity
Error Events
Virtual Disk
Information
al
Error Events
Virtual Disk
Minor
Error Events
Virtual Disk
Critical
status change associated
with this trap.
alert2StorageManagementFailure
4177
Storage Management has
Error Events
detected a device
independent error condition.
There is no global status
change associated with this
trap.
Table 2003. Storage Temperature Probe Traps
TrapID
Description
alert2StorageTemperatureProbeInformation
4211
Storage temperature probe
information.
alert2StorageTemperatureProbeWarning
4210
Storage temperature probe
warning.
alert2StorageTemperatureProbeFailure
4209
Storage temperature probe
failure.
Table 2004. Storage Virtual Disk Traps
TrapID
Description
alert2StorageVirtualDiskInformation
4355
Storage virtual disk
information.
alert2StorageVirtualDiskWarning
4354
Storage virtual disk warning.
alert2StorageVirtualDiskFailure
4353
Storage Virtual disk failure.
Audit Traps
The Audit Trap group contains traps that fall under the Audit event category.
515
Table 2005. Audit CMC Traps
TrapID
Description
Category
SubCategory
Severity
Chassis Management
Status Events
Controller audit information.
CMC
Information
al
Chassis Management
Controller audit warning.
Status Events
CMC
Minor
Chassis Management
Controller audit failure or
critical event.
Error Events
CMC
Critical
Description
Category
SubCategory
Severity
License information.
Status Events
License
Information
al
License warning.
Status Events
License
Minor
License failure.
Error Events
License
Critical
Category
SubCategory
Severity
Status Events
Power Usage
Minor
Error Events
Power Usage
Critical
alert2CMCAuditInformation
8691
alert2CMCAuditWarning
8690
alert2CMCAuditFailure
8689
Table 2006. Audit License Traps
TrapID
alert2LicenseInformation
8515
alert2LicenseWarning
8514
alert2LicenseFailure
8513
Table 2007. Audit Power Usage Traps
TrapID
Description
alert2PowerUsageAuditWarning
8418
Power usage audit warning.
alert2PowerUsageAuditFailure
8417
Power usage audit failure or
critical event.
Configuration Traps
The Configuration Trap group contains traps that fall under the Configuration event category.
516
Table 2008. Configuration IO Virtualization Traps
TrapID
Description
Category
SubCategory
Severity
Status Events
IO
Virtualization
Information
al
Description
Category
SubCategory
Severity
Test trap generated by CMC
in response to a user
request.
Status Events
Test
Information
al
alert2IOVConfigurationInformation
10747
IO virtualization
configuration information.
Table 2009. Configuration Test Traps
TrapID
alert2CMCTestTrap
10395
BMC Traps
The BMC monitors the system for critical events by communicating with various sensors on the system
board and by sending alerts and log events when certain parameters exceed their preset thresholds. All of
the traps documented in this section belong to the MIB enterprise identified by OID 1.3.6.1.4.1.3183.1.1.1.
TrapID
Description
Severity
262402
Generic Critical Fan Failure
Critical
262530
Generic Critical Fan Failure
Cleared
Information
131330
Under-Voltage Problem (Lower
Critical - going low)
Critical
131458
Under-Voltage Problem Cleared
Information
131841
Generic Critical Voltage Problem
Critical
131840
Generic Critical Voltage Problem
Cleared
Information
65792
Under-Temperature Warning
(Lower non-critical, going low)
Warning
65920
Under-Temperature Warning
Cleared
Information
65794
Under-Temperature Problem
(Lower Critical - going low)
Critical
65922
Under-Temperature Problem
Cleared
Information
65799
Over-Temperature warning
(Upper non-critical, going high)
Minor
65927
Over-Temperature warning
Cleared
Information
517
TrapID
Description
Severity
65801
Over-Temperature Problem
(Upper Critical - going high)
Critical
65929
Over-Temperature Problem
Cleared
Information
131328
Under-Voltage Warning (Lower
Non Critical - going low)
Warning
131456
Under-Voltage Warning Cleared
Information
131330
Under-Voltage Problem (Lower
Critical - going low)
Critical
131458
Under-Voltage Problem Cleared
Information
131335
Over-Voltage Warning (Upper
Non Critical - going high)
Warning
131463
Over-Voltage Warning Cleared
Information
131337
Over-Voltage Problem (Upper
Critical - going high)
Critical
131465
Over-Voltage Problem Cleared
Information
131841
Generic Critical Voltage Problem
Critical
131840
Generic Critical Voltage Problem
Cleared
Information
356096
Chassis Intrusion - Physical
Security Violation
Critical
356224
Chassis Intrusion (Physical
Security Violation) Event Cleared
Information
262400
Generic Predictive Fan Failure
(predictive failure asserted)
Minor
262528
Generic Predictive Fan Failure
Cleared
Information
262402
Generic Critical Fan Failure
Critical
262530
Generic Critical Fan Failure
Cleared
Information
264962
Fan redundancy has been
degraded
Warning
264961
Fan Redundancy Lost
Critical
264960
Fan redundancy has returned to
Normal
Information
2715392
Battery Low (Predictive Failure)
Warning
2715520
Battery Low (Predictive Failure)
Cleared
Information
518
TrapID
Description
Severity
2715393
Battery Failure
Critical
2715521
Battery Failure Cleared
Information
487169
CPU Thermal Trip (Over
Temperature Shutdown)
Critical
487297
CPU Thermal Trip (Over
Temperature Shutdown) Cleared
Information
487168
CPU Internal Error Critical
487296 CPU Internal Error
Cleared
Information
487173
CPU Configuration Error
Critical
487301
CPU Configuration Error Cleared
Information
487175
CPU Presence (Processor
Presence detected)
Information
487303
CPU Not Present (Processor Not
Present)
Critical
487170
CPU BIST (Built In Self Test)
Failure
Critical
487298
CPU BIST (Built In Self Test)
Failure Cleared
Information
487176
CPU Disabled (Processor
Disabled)
Critical
487304
CPU Enabled (Processor Enabled) Information
487178
CPU Throttle (Processor Speed
Reduced)
Warning
487306
CPU Throttle Cleared (Normal
Processor Speed)
Information
527106
Power Supply Redundancy
Degraded
Warning
527105
Power Supply Redundancy Lost
Critical
527104
Power Supply Redundancy has
returned to Normal
Information
552704
Power Supply Inserted
Information
552832
Power Supply Removed
Warning
552705
Power Supply Failure
Critical
552833
Power Supply Failure Cleared
Information
552706
Power Supply Warning
Warning
552834
Power Supply Warning Cleared
Information
519
TrapID
Description
Severity
552707
Power Supply AC Lost
Critical
552835
Power Supply AC Restored
Information
789249
Memory Redundancy has been
Lost
Critical
789248
Memory redundancy has
returned to Normal
Information
1076994
System Event Log (SEL) Cleared
Information
1076996
System Event Log (SEL) Full
(Logging Disabled)
Critical
2322176
ASR (Automatic System
Recovery) Timer Expired
Critical
2322177
ASR (Automatic System
Recovery) Reset Occurred
Critical
2322178
ASR (Automatic System
Recovery) Power Down
Occurred
Critical
2322179
ASR (Automatic System
Critical
Recovery) Power Cycle Occurred
520
Storage Management Alert Reference
7
Storage Management’s alert or event management features let you monitor the health of storage
resources such as controllers, connectors, array disks, and virtual disks.
Alert Monitoring and Logging
The Storage Management Service performs alert monitoring and logging. By default, the Storage
Management Service starts when the managed system starts up. If you stop the Disk Management
Service, then alert monitoring and logging stops. Alert monitoring does the following:
•
Updates the status of the storage object that generated the alert.
•
Propagates the storage object’s status to all the related higher objects in the storage hierarchy. For
example, the status of a lower-level object are propagated up to the status displayed on the Health
tab for the top-level storage object.
•
Logs an alert into the Alert log and Microsoft Windows application log.
•
Sends an Simple Network Management Protocol (SNMP) trap if the operating system’s SNMP service is
installed and enabled.
NOTE: Storage Management does not log alerts regarding the data I/O path. These alerts are logged
by the respective RAID drivers in the system alert log.
Viewing Alerts
Storage Management generates alerts that are added to the Windows application alert log and to the
Server Administrator Alert log. To view these alerts in Server Administrator:
1.
Select the System object in the tree view.
2.
Select the Logs tab.
3.
Select the Alert subtab.
You can also view these alerts in the Windows Event Viewer. Every alert consists of the following:
– Severity — Shows the severity of alert.
– Date and Time — Date and time when Storage Management logged the alert.
– Description — A brief description of the alert. To expand or collapse the alert description, click
the Description column heading.
Alert Severity Levels
Each alert message in the Storage Management alert log has a severity level which indicates the nature of
the alert and is displayed in the Severity field of the alert message. The severity level indicates the nature
of the alert.
521
Table 2010. Storage Management Alert Severity
Alert Severity
Component Status
OK/Normal/Informational
No action is required. The alert is provided for informational purposes
and does not indicate an error condition. For example, the alert may
indicate the normal start or stop of an operation.
Warning/Non-critical
A component requires attention. This alert indicates a potential problem,
but does not necessarily mean that the system has currently lost data or
is nonfunctional. For example, a Warning/Non-critical alert may indicate
that a component (such as a temperature probe in an enclosure) has
crossed a warning threshold.
Critical/Failure/Error
A component has either failed or failure is imminent. This alert indicates
a serious problem such as data loss or a loss of function. For example, a
Critical/Failure/Error alert may indicate that an array disk has failed.
SNMP Support for Storage Management Alerts
By default, Storage Management installs SNMP trap forwarding support. For this support to function, you
should have SNMP installed on the managed system prior to installing Storage Management.
NOTE: For more information on installation requirements and SNMP, see the Server Administrator
documentation.
SNMP Trap Forwarding
The Storage Management alerts are displayed in the Server Administrator alert log and are forwarded to
the Windows application alert log. If you have SNMP installed on the managed system (and the SNMP
service is running), the Storage Management alerts in the Windows application alert log are forwarded as
SNMP traps. In order for these traps to be viewable, however, a target system or application must be
configured to receive these traps. SNMP traps that are generated by Storage Management can be viewed
in any standard SNMP-compatible enterprise management console.
The Windows SNMP service must be configured to forward the SNMP traps to the target system or
application. When forwarding to an application, the application should also be configured to receive the
SNMP traps. The IT Assistant application is already configured to receive the SNMP traps generated by
Storage Management.
See Windows operating system documentation for information on configuring the operating system to
forward SNMP traps. This information may be located under such topics as Setting up SNMP or SNMP
traps . When configuring SNMP for Windows, be sure that the SNMP traps are forwarded to the correct
server. For information on configuring an application to receive SNMP traps, see the documentation for
that application.
SNMP Trap Definitions
The Storage Management information base (MIB) defines the SNMP traps that Storage Management
generates. These traps correspond to the alerts documented in the Alert Descriptions and Corrective
Actions section. The MIB is located in ..\sm\mibs\dcstorag.mib, a subdirectory of the Storage
Management installation directory.
522
NOTE: Storage Management supports trap forwarding on both 32-bit and 64-bit operating systems.
Trap Variables
The Storage Management SNMP traps use a set of variables that are included with every trap. Below
mentioned variables are the Traditional Varbinds:
Table 2011. Message ID Event
Name
messageIDEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.1
Description
Storage Management alert (event) message number.
Syntax
INTEGER
Access
Read-only
Table 2012. Description Event
Name
descriptionEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.2
Description
Storage Management event message text describing the alert.
Syntax
DisplayString
Access
Read-only
Table 2013. Location Event
Name
locationEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.3
Description
Additional information identifying the location of the object causing the
alert.
Syntax
DisplayString
Access
Read-only
Table 2014. Object Name Event
Name
objectNameEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.4
Description
Name of the object as represented in Storage Management causing the
alert.
Syntax
DisplayString
Access
Read-only
523
Table 2015. Object OID Event
Name
objectOIDEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.5
Description
MIB OID of the object causing the alert.
Syntax
DisplayString
Access
Read-only
Table 2016. Object Nexus Event
Name
objectNexusEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.6
Description
Durable, unique ID of the object causing the alert.
Syntax
DisplayString
Access
Read-only
Table 2017. Current Status Event
Name
currentStatusEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.7
Description
Current status of object causing the alert, if applicable.
Syntax
DellStatus
Access
Read-only
Table 2018. Previous Status Event
Name
previousStatusEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.8
Description
Previous status of object causing the alert if applicable.
Syntax
DellStatus
Access
Read-only
The below table shows the new enhanced mode varbinds which would be available in the EEMI were the
user can get both Traditional and Enhanced varbinds :
Table 2019. Enhanced Message ID Event
Name
enhancedMessageIDEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.9
Description
Enhanced Message ID of object causing the alert if applicable.
Syntax
DisplayString
524
Access
Read-only
Table 2020. Enhanced System FQDN Event
Name
systemFQDNEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.10
Description
Hostname of object causing the alert if applicable.
Syntax
DisplayString
Access
Read-only
Table 2021. Enhanced Service Tag Event
Name
serviceTagEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.11
Description
Service Tag of object causing the alert if applicable.
Syntax
DisplayString
Access
Read-only
Table 2022. Enhanced Chassis Service Tag Event
Name
chassisServiceTagEvent
Object ID
1.3.6.1.4.1.674.10893.1.20.200.12
Description
Chassis Service Tag of object causing the alert if applicable.
Syntax
DisplayString
Access
Read-only
Viewing SNMP Traps
SNMP traps that are generated by Storage Management can be viewed in any standard SNMP-compatible
enterprise management console. These traps are defined in the Storage Management MIB. These traps
correspond to the alerts documented in the Alert Descriptions and Corrective Actions section. For more
information on the MIB and its structure, as well as a change history of the SNMP traps, see the
Introduction section. For more information on configuring SNMP, see Support for Storage Management
Alerts .
Alert Descriptions and Corrective Actions
The alerts generated by the redundant array of independent disks (RAID) or Small Computer System
Interface (SCSI) controllers and supported by Storage Management are displayed in the Server
Administrator Alert subtab or through Windows Event Viewer. These alerts can also be forwarded as
SNMP traps to other applications.
SNMP traps that are generated for the alerts are included in the Storage Management MIB. The SNMP
traps for these alerts use all of the SNMP trap variables. For the list of storage management alerts and
525
storage management messages, see the Dell OpenManage Server Administrator Messages Reference
Guide available on the Dell Support website at dell.com/support/manuals.
526
iDRAC7 MIB
8
The Integrated Dell Remote Access Controller (iDRAC) MIB (filename iDRAC-SMIv1.mib/ iDRACSMIv2.mib) is the MIB supported by the Integrated Dell Remote Access Controller 7 (iDRAC7). This MIB
provides management data that allows you to monitor devices and software on a system via an out-ofband connection to the iDRAC7 of a system.
NOTE: iDRAC7 firmware release r1.30.30 or later, the iDRAC7 MIB file is published in both types of
SMI (Structure of Managed Information) notations: SMIv1 and SMIv2. The SMIv1 copy of the iDRAC7
MIB file is named iDRAC-SMIv1.mib. And the SMIv2 copy is named iDRAC-SMIv2.mib. Prior to
iDRAC7 firmware release r1.30.30, only a SMIv1 copy was published. And the file name of the SMIv1
copy was iDRAC-MIB.txt
Supported Systems
The iDRAC7 MIB is supported on the following systems:
Blade Servers
•
PowerEdge M420
•
PowerEdge M520
•
PowerEdge M620
•
PowerEdge M820
Rack and Tower Servers
•
PowerEdge R320
•
PowerEdge R420
•
PowerEdge R520
•
PowerEdge R620
•
PowerEdge R720
•
PowerEdge R720XD
•
PowerEdge R820
•
PowerEdge T320
•
PowerEdge T420
•
PowerEdge T620
iDRAC7 Supported SNMP Versions
The following table identifies the SNMP versions that support iDRAC7 for the given SNMP operations.
527
SNMP Operations
Supported SNMP version
GET, GETNEXT, GETBULK
SNMP v1, v2c and v3
TRAP
SNMP v1 and SNMP v2c
NOTE: iDRAC7 does not support the SNMP SET operation for any data
NOTE: iDRAC7 firmware release r1.30.30 or later supports SNMP query operations (GET, GETNEXT,
GETBULK) via the SNMPv3 protocol. In addition to supporting query operations via the SNMP v1 and
SNMP v2c protocols, SNMP User Security Model (USM) is supported.
iDRAC7 SNMP Data Security Features
iDRAC7 firmware release r1.30.30 or later supports the following data security features:
•
SNMP security lockout feature
– iDRAC7 supports a simply, non-configurable SNMP security lockout feature. If more than six
SNMPv3 USM authentication failures occur within a 2-minute window, then the iDRAC7 SNMP
Agent blocks all subsequent SNMPv3 requests/queries for 10 minutes.
•
Restriction of access to sensitive data
– Some of the MIB data that iDRAC7 supports can only be accessed via SNMPv3 queries. Access to
such data is blocked for SNMPv1 and SNMPv2c queries.
– Currently, the following one attribute, and one table, are considered to be “sensitive” data and
have this restriction:
*
numLCLogEntries (which has an SNMP OID of: 1.3.6.1.4.1.674.10892.5.4.300.2.0)
*
lcLogTable (which has an SNMP OID of: 1.3.6.1.4.1.674.10892.5.4.300.90)
iDRAC7 Out-of-Band Group
The objects of the Integrated Dell Remote Access Controller (iDRAC) MIB (iDRAC-MIB.txt) are organized
into subgroups of the iDRAC7 Out-of-Band Group. The subgroups are:
•
RAC Information Group
•
Chassis Information Group
•
System Information Group
•
Status Group
•
System Details Group
•
Storage Details Group
The following sections document the subgroups and the objects within each subgroup.
RAC Information Group
The RAC Information Group objects provide information about the iDRAC.
Table 2023. RAC Name
Name
racName
Object ID
1.3.6.1.4.1.674.10892.5.1.1.1.0
528
Description
This attribute defines the product name of a remote access card.
Syntax
StringType
Access
Read-only
Table 2024. RAC Name
Name
racShortName
Object ID
1.3.6.1.4.1.674.10892.5.1.1.2.0
Description
This attribute defines the short product name of a remote access card.
Syntax
StringType
Access
Read-only
Table 2025. RAC Description
Name
racDescription
Object ID
1.3.6.1.4.1.674.10892.5.1.1.3.0
Description
This attribute defines the product description of a remote access card.
Syntax
StringType
Access
Read-only
Table 2026. RAC Manufacturer
Name
racManufacturer
Object ID
1.3.6.1.4.1.674.10892.5.1.1.4.0
Description
This attribute defines the product manufacturer of a remote access
card.
Syntax
StringType
Access
Read-only
Table 2027. RAC Version
Name
racVersion
Object ID
1.3.6.1.4.1.674.10892.5.1.1.5.0
Description
This attribute defines the product version of a remote access card.
Syntax
StringType
Access
Read-only
Table 2028. RAC URL
Name
racURL
Object ID
1.3.6.1.4.1.674.10892.5.1.1.6.0
Description
This attribute defines the out-of-band UI URL of a remote access card.
Syntax
StringType
529
Access
Read-only
Table 2029. RAC Type
Name
racType
Object ID
1.3.6.1.4.1.674.10892.5.1.1.7.0
Description
This attribute defines the type of a remote access card.
Syntax
RacTypeEnum
Access
Read-only
Table 2030. RAC Firmware Version
Name
racFirmwareVersion
Object ID
1.3.6.1.4.1.674.10892.5.1.1.8.0
Description
This attribute defines the firmware version of a remote access card.
Syntax
StringType
Access
Read-only
Chassis Information Group
The Chassis Information Group objects provide information about the modular chassis in which a blade
system resides.
NOTE: This Chassis information is only available for modular/blade systems. For Rack and Tower
systems, the information is empty. Currently there is just one object under the Chassis Information
Group.
Table 2031. Chassis Service Tag
Name
chassisServiceTag
Object ID
1.3.6.1.4.1.674.10892.5.1.2.1.0
This attribute defines the service tag of the enclosing chassis.
StringType
Read-only
System Information Group
The System Information Group objects provide information about the system in which the iDRAC resides.
Table 2032. System Fully Qualified Domain Name
Name
systemFQDN
Object ID
1.3.6.1.4.1.674.10892.5.1.3.1.0
Description
This attribute defines the fully qualified domain name of the system.
Syntax
StringType
Access
Read-only
530
Table 2033. System Service Tag
Name
systemServiceTag
Object ID
1.3.6.1.4.1.674.10892.5.1.3.2.0
Description
This attribute defines the service tag of the system.
Syntax
StringType
Access
Read-only
Table 2034. System Express Service Code
Name
systemExpressServiceCode
Object ID
1.3.6.1.4.1.674.10892.5.1.3.3.0
Description
This attribute defines the express service code of the system.
Syntax
StringType
Access
Read-only
Table 2035. System Asset Tag
Name
systemAssetTag
Object ID
1.3.6.1.4.1.674.10892.5.1.3.4.0
Description.
This attribute defines the asset tag of the system.
Syntax
StringType
Access
Read-only
Table 2036. System Blade Slot Number
Name
systemBladeSlotNumber
Object ID
1.3.6.1.4.1.674.10892.5.1.3.5.0
Description
This attribute defines the slot number of the blade in the chassis.
Syntax
StringType
Access
Read-only
Table 2037. System Operating System Name
Name
systemOSName
Object ID
1.3.6.1.4.1.674.10892.5.1.3.6.0
Description
This attribute defines the name of the operating system that the host is
running.
Syntax
StringType
Access
Read-only
Table 2038. System Form Factor
Name
systemFormFactor
Object ID
1.3.6.1.4.1.674.10892.5.1.3.7.0
531
Description
This attribute defines the form factor of the system.
Syntax
SystemFormFactorEnum
Access
Read-only
Table 2039. System Data Center Name
Name
systemDataCenterName
Object ID
1.3.6.1.4.1.674.10892.5.1.3.8.0
Description
This attribute defines the Data Center locator of the system.
Syntax
StringType
Access
Read-only
Table 2040. System Aisle Name
Name
systemAisleName
Object ID
1.3.6.1.4.1.674.10892.5.1.3.9.0
Description
This attribute defines the Aisle locator of the system.
Syntax
StringType
Access
Read-only
Table 2041. System Rack Name
Name
systemRackName
Object ID
1.3.6.1.4.1.674.10892.5.1.3.10.0
Description
This attribute defines the Rack locator of the system.
Syntax
StringType
Access
Read-only
Table 2042. System Rack Slot
Name
systemRackSlot
Object ID
1.3.6.1.4.1.674.10892.5.1.3.11.0
Description
This attribute defines the Rack Slot locator of the system.
Syntax
StringType
Access
Read-only
Table 2043. System Model Name
Name
systemModelName
Object ID
1.3.6.1.4.1.674.10892.5.1.3.12.0
Description
This attribute defines the model name of the system.
Syntax
StringType
Access
Read-only
532
Table 2044. System System ID
Name
systemSystemID
Object ID
1.3.6.1.4.1.674.10892.5.1.3.13.0
Description
This attribute defines the system ID of the system.
Syntax
Unsigned16BitRange
Access
Read-only
Table 2045. System OS Version
Name
systemOSVersion
Object ID
1.3.6.1.4.1.674.10892.5.1.3.14.0
Description
This attribute defines the version of the operating system that the host is
running.
Syntax
StringType
Access
Read-only
Table 2046. System Room Name
Name
systemRoomName
Object ID
1.3.6.1.4.1.674.10892.5.1.3.15.0
Description
This attribute defines the Room locator of the system.
Syntax
StringType
Access
Read-only
Table 2047. System Chassis System Height
Name
systemChassisSystemHeight
Object ID
1.3.6.1.4.1.674.10892.5.1.3.16.0
Description
This attribute defines the height of the system, in 'U's. A U is a standard
unit of measure for the height of a rack or rack-mountable component.
Syntax
INTEGER
Access
Read-only
Table 2048. System Blade Geometry
Name
systemBladeGeometry
Object ID
1.3.6.1.4.1.674.10892.5.1.3.17.0
Description
This attribute defines the blade geometry for a blade system. (If not
applicable, a 'no such name' error is returned.)
Syntax
BladeGeometryEnum
Access
Read-only
533
Status Group
The Status Group objects provide status information about the system and storage.
Table 2049. Global System Status
Name
globalSystemStatus
Object ID
1.3.6.1.4.1.674.10892.5.2.1.0
Description
This attribute defines the overall rollup status of all components in the
system being monitored by the remote access card.
Syntax
ObjectStatusEnum
Access
Read-only
Table 2050. System LCD Status
Name
systemLCDStatus
Object ID
1.3.6.1.4.1.674.10892.5.2.2.0
Description
This attribute defines the system status as it is reflected by the LCD front
panel. Not all system components may be included.
Syntax
ObjectStatusEnum
Access
Read-only
Table 2051. Global Storage Status
Name
globalStorageStatus
Object ID
1.3.6.1.4.1.674.10892.5.2.3.0
Description
This attribute defines the overall storage status being monitored by the
remote access card.
Syntax
ObjectStatusEnum
Access
Read-only
Table 2052. System Power State
Name
systemPowerState
Object ID
1.3.6.1.4.1.674.10892.5.2.4.0
Description
This attribute defines the power state of the system.
Syntax
PowerStateStatusEnum
Access
Read-only
Systems Details Group
The Systems Details Group contains objects and tables that provide detailed information about the
system in which the iDRAC7 resides.
NOTE: See the iDRAC7 MIB file for details of the objects and tables supported under the Systems
Details Group.
534
Storage Details Group
The Storage Details Group contains tables that provide detailed information about the external storage
subsystem of the system in which iDRAC7 resides.
NOTE: See the iDRAC7 MIB file for details of the tables supported under the Storage Details Group.
iDRAC7 Traps
The iDRAC7 generates events that result in Simple Network Management Protocol (SNMP) traps and/or
entries in the iDRAC7 Lifecycle Log. This section describes the traps, also known as alerts, generated by
the iDRAC7.
The iDRAC7 generates events in response to changes in the status of sensors and other monitored
parameters. When an event with predefined characteristics occurs on your system, the SNMP subagent
sends information about the event, along with trap variables, to the management console.
Each event generates an identifier called the trap ID and a list of trap variables that provide additional
details about the event. The trap variables are listed in the following on Trap Variables.
The traps of the iDRAC7 MIB are organized into five subgroups of traps. Each subgroup corresponds to
one of the five categories of events that iDRAC7 supports (the System Health, Storage Health, Updates,
Audit, and Configuration categories). Here is a list of the trap subgroups are:
•
System Trap Group
•
Storage Trap Group
•
Updates Trap Group
•
Audit Trap Group
•
Configuration Trap Group
The trap subgroups, and all the traps within each trap subgroup, are described and listed in sections
following the Trap Variables section.
NOTE: The traps listed in this document can be correlated to specific events that are documented
in the Dell Event Message Reference guide. There is 1-to-many relationship between SNMP traps
and events in iDRAC7. To correlate a trap to a specific event or set of events, you can match the
Trap ID value of a trap in this document to the Trap/Event ID value of events in the Dell Event
Message Reference guide.
Trap Variables
This section lists the six variables that are sent with iDRAC7 traps to provide additional information about
a trap or alert generated by some event on the system. The trap variables presented here apply to all
iDRAC7 traps. The trap variables are sent in the order listed and are reserved for use only in traps.
Table 2053. Alert Message ID
Variable Name
alertMessageID
Object ID
1.3.6.1.4.1.674.10892.5.3.1.1.0
Description
Message ID of the event.
Syntax
DisplayString
535
Access
Read-only
Table 2054. Alert Message
Variable Name
alertMessage
Object ID
1.3.6.1.4.1.674.10892.5.3.1.2.0
Description
Message describing the alert.
Syntax
StringType
Table 2055. Alert Current Status
Variable Name
alertCurrentStatus
Object ID
1.3.6.1.4.1.674.10892.5.3.1.3.0
Description
Current status of object causing the alert, if applicable.
Syntax
ObjectStatusEnum
Access
Read-only
Table 2056. Alert System Service Tag
Variable Name
alertSystemServiceTag
Object ID
1.3.6.1.4.1.674.10892.5.3.1.4.0
Description
Service tag of the system.
Syntax
DisplayString
Table 2057. Alert System FQDN
Variable Name
alertSystemFQDN
Object ID
1.3.6.1.4.1.674.10892.5.3.1.5.0
Description
Fully qualified domain name of the system.
Syntax
StringType
Table 2058. Alert FQDD
Variable Name
alertFQDD
Object ID
1.3.6.1.4.1.674.10892.5.3.1.6.0
Description
Fully qualified device descriptor of the device.
Syntax
DisplayString
Table 2059. Alert Device Display Name
Variable Name
alertDeviceDisplayName
Object ID
1.3.6.1.4.1.674.10892.5.3.1.7.0
Description
Display name of the device/FQDD
Syntax
DisplayString
536
Table 2060. Alert Message Arguments
Variable Name
alertMessageArguments
Object ID
1.3.6.1.4.1.674.10892.5.3.1.8.0
Description
Concatenated set of strings representing the message arguments of the
event. Each message argument string is enclosed in double quotes, and
there is a comma after the ending double quote of each message
argument string, except the last one. Any double quotes found within a
message argument string are preprocessed and changed to single
quotes.
Syntax
StringType
Table 2061. Alert Chassis Service Tag
Variable Name
alertChassisServiceTag
Object ID
1.3.6.1.4.1.674.10892.5.3.1.9.0
Description
For blade systems, the service tag of the enclosing chassis. For rack and
tower systems, this varbind will be empty (zero length).
Syntax
DisplayString
System Trap Group
The System Trap Group contains traps that fall under the System Health event category of the iDRAC7.
System Health traps are traps those are generally generated in response to events related to the hardware
of the system in which an iDRAC7 resides.
Table 2062. Amperage Probe Traps
TrapID
Description
Category
SubCategory
Severity
Current sensor reading is
within range.
System Health
Amperage
Information
al
Current sensor has detected System Health
a warning value.
Amperage
Minor
Current sensor has detected System Health
a failure value.
Amperage
Critical
Category
SubCategory
Severity
System Health
Auto Sys Reset
Critical
Amperage Probe Normal
2179
Amperage Probe Warning
2178
Amperage Probe Failure
2177
Table 2063. Automatic System Recovery Trap
TrapID
Description
Automatic System Recovery
2233
Automatic system recovery
(ASR) was performed.
537
Table 2064. Battery Traps
TrapID
Description
Category
SubCategory
Severity
Battery state has returned to System Health
normal; or battery presence
had been detected.
Battery Event
Information
al
Battery is low.
System Health
Battery Event
Minor
Battery has failed or battery
is absent.
System Health
Battery Event
Critical
Category
SubCategory
Severity
System Health
Processor
Information
al
System Health
Processor
Minor
System Health
Processor
Critical
Description
Category
SubCategory
Severity
Processor device is absent.
System Health
Proc Absent
Critical
Description
Category
SubCategory
Severity
Fan information.
System Health
Fan Event
Information
al
Fan warning.
System Health
Fan Event
Minor
Battery Normal
2227
Battery Warning
2226
Battery Failure
2225
Table 2065. Processor Device Status Traps
TrapID
Description
Processor DeviceStatus Normal
2243
Processor device status has
returned to normal.
ProcessorDeviceStatusWarning
2242
Processor device status has
detected a warning.
ProcessorDeviceStatusFailure
2241
Processor device status has
detected a failure.
Table 2066. Processor Device Absent Trap
TrapID
Processor Device Absent
2457
Table 2067. Fan Traps
TrapID
Fan Information
2155
Fan Warning
2154
Fan Failure
538
TrapID
Description
Category
SubCategory
Severity
2153
Fan failure.
System Health
Fan Event
Critical
Description
Category
SubCategory
Severity
Fiber Channel information.
System Health
Fiber Channel
Information
al
Fiber Channel warning.
System Health
Fiber Channel
Minor
Fiber Channel failure or
critical event.
System Health
Fiber Channel
Critical
Category
SubCategory
Severity
System Health
Hardware
Config
Information
al
System Health
Hardware
Config
Minor
System Health
Hardware
Config
Critical
Category
SubCategory
Severity
Memory device
informational event.
System Health
Memory
Information
al
Memory device status is
noncritical.
System Health
Memory
Minor
Memory device status is
critical.
System Health
Memory
Critical
Table 2068. Fiber Channel Traps
TrapID
Fiber Channel Information
2539
Fiber Channel Warning
2538
Fiber Channel Failure
2537
Table 2069. Hardware Configuration Traps
TrapID
Description
Hardware Configuration Information
2331
Hardware configuration
information.
Hardware Configuration Warning
2330
Hardware configuration
warning.
Hardware Configuration Failure
2329
Hardware configuration
failure or critical event.
Table 2070. Memory Device Traps
TrapID
Description
Memory Device Information
2267
Memory Device Warning
2266
Memory Device Failure
2265
539
Table 2071. NIC Traps
TrapID
Description
Category
SubCategory
Severity
Network information.
System Health
NIC Config
Information
al
Network warning.
System Health
NIC Config
Minor
Network failure or critical
event.
System Health
NIC Config
Critical
Description
Category
SubCategory
Severity
An OS graceful stop
occurred; or an OS graceful
shut-down occurred.
System Health
OS Event
Information
al
A critical stop occurred
System Health
during OS load; or a runtime
critical stop occurred.
OS Event
Critical
Network Information
2091
Network Warning
2090
Network Failure
2089
Table 2072. Operation System ("OS") Event Traps
TrapID
OS Information
2411
OS Failure
2409
Table 2073. PCI Device Traps
TrapID
Description
Category
SubCategory
Severity
An informational event was
detected for a PCI device.
System Health
PCI Device
Information
al
A warning event was
detected for a PCI device.
System Health
PCI Device
Minor
An error was detected for a
PCI device.
System Health
PCI Device
Critical
Description
Category
SubCategory
Severity
Physical disk information.
System Health
Physical Disk
Information
al
PCI Device Information
2419
PCI Device Warning
2418
PCI Device Failure
2417
Table 2074. Physical Disk Traps
TrapID
Physical Disk Information
2299
540
TrapID
Description
Category
SubCategory
Severity
Physical disk warning.
System Health
Physical Disk
Minor
Physical disk failure.
System Health
Physical Disk
Critical
Description
Category
SubCategory
Severity
System BIOS detected a
failure.
System Health
BIOS POST
Critical
Description
Category
SubCategory
Severity
Power supply has returned
to normal.
System Health
Power Supply
Information
al
Power supply has detected a System Health
warning.
Power Supply
Minor
Power supply has detected a System Health
failure.
Power Supply
Critical
Physical Disk Warning
2298
Physical Disk Failure
2297
Table 2075. BIOS POST Trap
TrapID
Bios Post Failure
2425
Table 2076. Power Supply Traps
TrapID
Power Supply Normal
2187
Power Supply Warning
2186
Power Supply Failure
2185
Table 2077. Power Supply Absent Trap
TrapID
Description
Category
SubCategory
Severity
Power supply is absent.
System Health
PSU Absent
Critical
Description
Category
SubCategory
Severity
System performance
restored.
System Health
Power Usage
Information
al
System performance
degraded.
System Health
Power Usage
Minor
Power Supply Absent
2465
Table 2078. Power Usage Traps
TrapID
Power Usage Information
2275
Power Usage Warning
2274
Power Usage Failure
541
TrapID
Description
Category
SubCategory
Severity
2273
The system halted because
system power exceeds
capacity; or the system
performance degraded
because power draw
exceeds the power
threshold.
System Health
Power Usage
Critical
Description
Category
SubCategory
Severity
Redundancy information.
System Health
Redundancy
Information
al
Redundancy is degraded.
System Health
Redundancy
Minor
Redundancy is lost.
System Health
Redundancy
Critical
Category
SubCategory
Severity
System Health
IDSDM Media
Information
al
System Health
IDSDM Media
Minor
System Health
IDSDM Media
Critical
Category
SubCategory
Severity
System Health
IDSDM Absent
Critical
Table 2079. Redundancy Traps
TrapID
Redundancy Information
2475
Redundancy Degraded
2474
Redundancy Lost
2473
Table 2080. Integrated Dual SD Module Traps
TrapID
Description
Integrated Dual SD ModuleInformation
2211
Integrated Dual SD Module
information.
Integrated Dual SD ModuleWarning
2210
Integrated Dual SD Module
warning.
Integrated Dual SD ModuleFailure
2297
Integrated Dual SD Module
failure.
Table 2081. Integrated Dual SD Module Absent Trap
TrapID
Description
Integrated Dual SD ModuleAbsent
2481
542
Integrated Dual SD Module
is absent.
Table 2082. Integrated Dual SD Module Redundancy Traps
TrapID
Description
Category
SubCategory
Severity
System Health
IDSDM
Redundancy
Information
al
System Health
IDSDM
Redundancy
Minor
System Health
IDSDM
Redundancy
Critical
Description
Category
SubCategory
Severity
Security information.
System Health
Security Event
Information
al
Security failure or critical
event.
System Health
Security Event
Critical
Category
SubCategory
Severity
System Health
Sys Event Log
Information
al
System Event Log warning.
System Health
Sys Event Log
Minor
System Event Log failure or
critical event.
System Health
Sys Event Log
Critical
Category
SubCategory
Severity
System Health
Temperature
Information
al
Integrated Dual SD Module Redundancy Information
2491
Integrated Dual SD Module
redundancy information.
Integrated Dual SD Module Redundancy Degraded
2490
Integrated Dual SD Module
redundancy is degraded.
Integrated Dual SD Module Redundancy Lost
2489
Integrated Dual SD Module
redundancy is lost.
Table 2083. Security Event Traps
TrapID
Security Information
2387
Security Failure
2385
Table 2084. System Event Log Traps
TrapID
Description
System Event Log Information
2379
System Event Log
information.
System Event Log Warning
2378
System Event Log Failure
2377
Table 2085. Temperature Probe Traps
TrapID
Description
Temperature Probe Normal
2163
Temperature sensor value is
within range.
Temperature Probe Warning
543
TrapID
Description
Category
SubCategory
Severity
2162
Temperature sensor has
detected a warning value.
System Health
Temperature
Minor
System Health
Temperature
Critical
Category
SubCategory
Severity
Temperature
Statistics
Minor
Temperature
Statistics
Critical
Category
SubCategory
Severity
System Health
vFlash Event
Information
al
System Health
vFlash Event
Minor
System Health
vFlash Event
Critical
Category
SubCategory
Severity
System Health
vFlash Absent
Information
al
Temperature Probe Failure
2161
Temperature sensor has
detected a failure value.
Table 2086. Temperature Statistics Traps
TrapID
Description
Temperature Statistics Warning
2522
Temperature has been
System Health
above the warning or critical
threshold level for a long
enough period of time to be
considered in a warning
state.
Temperature Statistics Failure
2521
Temperature has been
System Health
above the warning or critical
threshold level for a long
enough period of time to be
considered in a critical state.
Table 2087. vFlash Media Device Traps
TrapID
Description
vFlash Media Device Information
2507
vFlash Media device
information.
vFlash Media Device Warning
2506
vFlash Media device
warning.
vFlash Media Device Failure
2505
vFlash Media device failure.
Table 2088. vFlash Media Device Absent Trap
TrapID
Description
vFlash Media Device Absent
2515
544
vFlash Media device is
absent.
Table 2089. Voltage Probe Traps
TrapID
Description
Category
SubCategory
Severity
Voltage sensor reading is
within range.
System Health
Voltage
Information
al
Voltage sensor has detected System Health
a warning value.
Voltage
Minor
Voltage sensor has detected System Health
a failure value.
Voltage
Critical
Voltage Probe Normal
2171
Voltage Probe Warning
2170
Voltage Probe Failure
2169
Storage Trap Group
The Storage Trap Group contains traps that fall under the Storage event category of iDRAC7. Storage
traps are traps generated in response to events related to the external storage subsystem of the system in
which iDRAC7 resides.
Table 2090. Battery Traps
TrapID
Description
Category
SubCategory
Severity
Battery state has returned to
normal; or battery presence
has been detected.
Storage
Battery Event
Information
al
Battery is low.
Storage
Battery Event
Minor
Battery has failed or battery is
absent.
Storage
Battery Event
Critical
Category
SubCategory
Severity
Storage
Storage Contr
Information
al
Storage
Storage Contr
Minor
Storage
Storage Contr
Critical
Battery Normal
4275
Battery Warning
4274
Battery Failure
4273
Table 2091. Controller Traps
TrapID
Description
Storage Controller Information
4331
Controller information.
Storage Controller Warning
4330
Controller warning.
Storage Controller Failure
4329
Controller failure.
545
Table 2092. Enclosure Traps
TrapID
Description
Category
SubCategory
Severity
Storage
Storage Enclosr Information
al
Storage
Storage Enclosr Minor
Enclosure failure.
Storage
Storage Enclosr Critical
Description
Category
SubCategory
Severity
Fan information.
Storage
Fan Event
Information
al
Fan warning.
Storage
Fan Event
Minor
Fan failure.
Storage
Fan Event
Critical
Category
SubCategory
Severity
Storage
Physical Disk
Information
al
Storage
Physical Disk
Minor
Storage
Physical Disk
Critical
Category
SubCategory
Severity
Storage
Power Supply
Information
al
Storage
Power Supply
Minor
Storage Enclosure Information
4339
Enclosure information.
Storage Enclosure Warning
4338
Enclosure warning.
Storage Enclosure Failure
4337
Table 2093. Fan Traps
TrapID
Storage Fan Information
4203
Storage Fan Warning
4202
Storage Fan Failure
4201
Table 2094. Physical Disk Traps
TrapID
Description
Storage Physical Disk Information
4347
Physical disk information.
Storage Physical Disk Warning
4346
Physical disk warning.
Storage Physical Disk Failure
4345
Physical disk failure.
Table 2095. Power Supply Traps
TrapID
Description
Storage Power Supply Information
4235
Power supply information.
Storage Power Supply Warning
4234
Power supply warning.
Storage Power Supply Failure
546
TrapID
Description
Category
SubCategory
Severity
4233
Power supply failure.
Storage
Power Supply
Critical
Category
SubCategory
Severity
Storage
Information
al
Storage
Minor
Storage
Critical
Category
SubCategory
Severity
Storage
Temperature
Information
al
Storage
Temperature
Minor
Storage
Temperature
Critical
Category
SubCategory
Severity
Storage
Virtual Disk
Information
al
Storage
Virtual Disk
Minor
Storage
Virtual Disk
Critical
Table 2096. Storage Management Status Traps
TrapID
Description
Storage Management Information
4179
Storage Management
Storage
information. There is no global
status change associated with
this trap.
Storage Management Warning
4178
Storage Management has
Storage
detected a device independent
warning condition. There is no
global status change
associated with this trap.
Storage Management Failure
4177
Storage Management has
Storage
detected a device independent
error condition. There is no
global status change
associated with this trap.
Table 2097. Temperature Probe Traps
TrapID
Description
Storage Temperature Probe Information
4211
Temperature probe
information.
Storage Temperature Probe Warning
4210
Temperature probe warning.
Storage Temperature Probe Failure
4209
Temperature probe failure.
Table 2098. Virtual Disk Trap
TrapID
Description
Storage VirtualDisk Information
4355
Virtual disk information.
Storage Virtual Disk Warning
4354
Virtual disk warning.
Storage Virtual Disk Failure
4353
Virtual disk failure.
547
Updates Trap Group
The Updates Trap Group contains traps that fall under the Updates event category of iDRAC7. Updates
traps are traps generated in response to events related to firmware/driver upgrades/downgrades.
NOTE: Currently there are no Update traps.
Audit Trap Group
The Audit Trap Group contains traps that fall under the Audit event category of iDRAC7. Audit traps are
traps generated in response to audit-type events of iDRAC7, such as authorizing of debugging, changes
to iDRAC7 license state, power state changes, etc.
Table 2099. Debug Traps
TrapID
Description
Category
SubCategory
Severity
Debug authorized.
Audit
Debug
Informational
Debug authorization failed.
Audit
Debug
Minor
Description
Category
SubCategory
Severity
iDRAC IP address has
changed.
Audit
DRAC IP
Address
Informational
Description
Category
SubCategory
Severity
License information.
Audit
Licensing
Informational
License warning.
Audit
Licensing
Minor
License failure.
Audit
Licensing
Critical
Category
SubCategory
Severity
Audit
System Info
Informational
Debug Information
8595
DebugWarning
8594
Table 2100. iDRAC IP Address Change Trap
TrapID
iDRAC IP Address Change
8499
Table 2101. License Traps
TrapID
License Information
8515
License Warning
8514
License Failure
8513
Table 2102. System Power State Change Trap
TrapID
Description
System Power State Change Information
8579
548
Host is going through a
power state change
(powering on or powering
off).
Configuration Trap Group
The Configuration Trap Group contains traps that fall under the Configuration event category of the
iDRAC7. Configuration traps are traps generated in response to events related to hardware configuration
changes and software configuration changes.
TrapID
Description
Category
SubCategory
The iDRAC generated a test
trap event in response to a
user request.
Configuration Test Alert
Severity
Test Trap Event
10395
Informationa
l
549
550
Standard Data Type Definitions
9
This appendix contains definitions for data types that are standard in most contexts across the
information technology industry. These are the most common data types for describing variable values
defined in the 10892.mib , dcs3rmt.mib and dcs3fru.mib files. Server Administrator-specific variable
values are defined in the last section of the section in which they are introduced.
Common Data Types
Common data types include several types of strings, the object range, signed and unsigned bit ranges,
and the familiar Boolean (true or false) data type.
Table 2103. Common Data Types
Variable Name:
Definition
DellString
DisplayString (SIZE (0..64))
DellSecurityString
DisplayString (SIZE (0..255))
DellCostofOwnershipString
DisplayString (SIZE (0..64))
DellObjectRange
INTEGER (1..128)
DellUnsigned8BitRange
INTEGER (1..256)
DellUnsigned16BitRange
INTEGER (1..65535)
DellUnsigned32BitRange
INTEGER (1..2147483647)
DellSigned32BitRange
INTEGER (-2147483647..2147483647)
DellBoolean
INTEGER (0..1 (FALSE = 0, TRUE = 1))
Variables with Data Types of State Capabilities and State
Capabilities Unique
Variables with definitions of <variable name>StateCapabilities or <variable
name>StateCapabilitiesUnique are integers representing a series of bit definitions. They are NOT
enumerations and should be treated as bit fields. The value is passed as a decimal value. The decimal
value should be converted to hex and the appropriate bits should be parsed from hex. Some of the more
common bit combinations are defined in some variables, but not all combinations are or will be defined.
Table 2104. Dell State Capabilities
Variable Name: DellStateCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
if set to zero(0)
The object has no capabilities.
551
unknownCapabilities(1)
The object’s capabilities are unknown.
enableCapable(2)
The object can be disabled (offline, a binary 0
value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The object is not ready.
enableAndNotReadyCapable (6)
Enable and not ready capable.
Table 2105. Dell State Settings
Variable Name: DellStateSettings
Data Type: Integer
Possible Data Values
Meaning of Data Value
if set to zero(0)
The object has no settings capabilities and its state
is disabled.
unknown(1)
The object’s state is unknown.
enabled(2)
The object’s state is disabled (offline, a binary 0
value) or enabled (online, a binary 1 value).
notReady(4)
The object is not ready.
enableAndNotReady(6)
The object is enabled and not ready.
Table 2106. Dell Probe Capabilities
Variable Name: DellProbeCapabilities
Data Type: Integer
Possible Data Values
Meaning of Data Value
if set to zero(0)
The object has no capabilities.
upperNonCriticalThresholdSetCapable(1)
The upper noncritical threshold can be set.
lowerNonCriticalThresholdSetCapable(2)
The lower noncritical threshold can be set.
upperNonCriticalThresholdDefaultCapabl
e(4)
The upper noncritical threshold can be set to
default.
lowerNonCriticalThresholdDefaultCapabl
e(8)
The lower noncritical threshold can be set to
default.
Dell Status Data Types
Status data types include DellStatus, DellStatusRedundancy, and DellStatusProbe.
Table 2107. Dell Status
Variable Name: DellStatus
Data Type: Integer
Possible Data Values
Meaning of Data Value
other(1)
The object’s status is not one of the following:
unknown(2)
The object’s status is unknown.
552
ok(3)
The object’s status is OK.
nonCritical(4)
The object’s status is warning, noncritical.
critical(5)
The object’s status is critical (failure).
nonRecoverable(6)
The object’s status is nonrecoverable (dead).
Table 2108. Dell Status Redundancy
Variable Name: DellStatusRedundancy
Data Type: Integer
Possible Data Values
Meaning of Data Value
other(1)
The object’s status is not one of the following:
unknown(2)
The object’s redundancy status is unknown.
full(3)
The object is fully redundant.
degraded(4)
The object’s redundancy has been degraded.
lost(5)
The object’s redundancy has been lost.
notRedundant(6)
Redundancy does not apply or it is not redundant.
Table 2109. Dell Status Probe
Variable Name: DellStatusProbe
Data Type: Integer
Possible Data Values
Meaning of Data Value
other(1)
The object’s status is not one of the following:
unknown(2)
The status of the object is unknown.
ok(3)
The status of the object is OK.
nonCriticalUpper(4)
The object is at the noncritical upper limit.
CriticalUpper(5)
The object is at the critical upper limit.
nonRecoverableUpper(6)
The object is at the nonrecoverable upper limit.
nonCriticalLower(7)
The object is at the noncritical lower limit.
criticalLower(8)
The object is at the critical lower limit.
nonRecoverableLower(9)
The object is at the nonrecoverable lower limit.
failed(10)
The status of the object is failed.
Dell Date
Variable Name: DellDate
Data Type: DellUnsigned64BitRange Octet String (SIZE(8))
The DellDate definition is required because SNMP V1 does not support 64-bit ranges. The information
sent back by this subagent has the most significant byte of the information as the first byte. For example,
553
the hex address 0x1029384754657687 is sent as hex: 0001 0000 0010 1001 0011 1000 0100 0111 ... Byte
1 Byte 2 Byte 3 Byte 4.
Full Dates
Variable Name: DellDateName
Data Type: DisplayString DisplayString (SIZE (25))
Full dates are defined in the ASCII format: yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.uuuuuufff
where yyyy is the year, MM is the month, dd is the day, hh are the hours, mm are the minutes, and ss are
the seconds. uuuuuu is the number of microseconds, and +fff or -fff is the offset from UTC in minutes.
For example, Friday, October 31, 2001, at 6:05:19 PM CST would be represented as
20011031180519.000000-360.
The values are zero-padded, and if a valid value for a field is not deliverable, each character in the field is
replaced with an asterisk (*) character.
554
SNMP Sample Output
10
This appendix contains the sample output from the Simple Network Management Protocol (SNMP)
covering the first four groups of the Instrumentation management information base (MIB) sample output
from the Simple Network Management Protocol (SNMP) covers the first four groups of the
Instrumentation management information base (MIB). Values are shown for each object identifier (OID) in
the Instrumentation MIB Version Group, the Systems Management Software Group, the System State
Group, the Chassis Information Table, and Event Log Table. The data is from a Dell PowerEdge 2650
system.
Walk .1.3.6.1.4.1.674.10892 (Agent: 'SERVER01',
Community: 'public')
.iso.org.dod.internet.private.enterprises.dell.server3
1.3.6.1.4.1.674.10892.1.1.1.0 = 5
1.3.6.1.4.1.674.10892.1.1.2.0 = 3
1.3.6.1.4.1.674.10892.1.1.3.0 = 0
1.3.6.1.4.1.674.10892.1.100.1.0 = 'Server
Administrator'
1.3.6.1.4.1.674.10892.1.100.2.0 = '5.3.0'
1.3.6.1.4.1.674.10892.1.100.3.0 = 4522
1.3.6.1.4.1.674.10892.1.100.4.0 = 'Management
software for Dell systems.'
1.3.6.1.4.1.674.10892.1.100.5.0 = 1
1.3.6.1.4.1.674.10892.1.100.6.0 = 1
1.3.6.1.4.1.674.10892.1.100.7.0 = 'No Updates'
1.3.6.1.4.1.674.10892.1.100.8.0 =
'https://1.2.3.4:1311'
1.3.6.1.4.1.674.10892.1.100.9.0 = 'en_US'
1.3.6.1.4.1.674.10892.1.100.10.0 = '2.2.0'
1.3.6.1.4.1.674.10892.1.100.11.0 = 0
1.3.6.1.4.1.674.10892.1.100.12.0 = 1
1.3.6.1.4.1.674.10892.1.100.13.0 = 'Dell Inc.'
1.3.6.1.4.1.674.10892.1.200.10.1.1.1 = 1
1.3.6.1.4.1.674.10892.1.200.10.1.2.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.3.1 = 2
1.3.6.1.4.1.674.10892.1.200.10.1.4.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.5.1 = '\02'
1.3.6.1.4.1.674.10892.1.200.10.1.6.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.7.1 = '\03'
1.3.6.1.4.1.674.10892.1.200.10.1.8.1 = '\02\02'
1.3.6.1.4.1.674.10892.1.200.10.1.9.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.10.1 = '\03\03'
1.3.6.1.4.1.674.10892.1.200.10.1.11.1 =
'\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\02\
02\02\02'
1.3.6.1.4.1.674.10892.1.200.10.1.12.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.13.1 =
'\03\03\03\03\03\03\03\03\03\03\03\03\03\03\03\03\03\
03\03\03'
1.3.6.1.4.1.674.10892.1.200.10.1.20.1 =
'\02\02\02\02\02'
1.3.6.1.4.1.674.10892.1.200.10.1.21.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.22.1 =
'\03\03\03\03\03'
555
1.3.6.1.4.1.674.10892.1.200.10.1.23.1 =
'\02\02\02\02\02\02'
1.3.6.1.4.1.674.10892.1.200.10.1.24.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.25.1 =
'\03\03\03\03\03\03'
1.3.6.1.4.1.674.10892.1.200.10.1.26.1 =
'\02\02\02\02'
1.3.6.1.4.1.674.10892.1.200.10.1.27.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.28.1 =
'\03\03\03\03'
1.3.6.1.4.1.674.10892.1.200.10.1.29.1 = '\02'
1.3.6.1.4.1.674.10892.1.200.10.1.30.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.31.1 = '\03'
1.3.6.1.4.1.674.10892.1.200.10.1.41.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.42.1 = 3
1.3.6.1.4.1.674.10892.1.200.10.1.43.1 = '\03'
1.3.6.1.4.1.674.10892.1.300.10.1.1.1 = 1
1.3.6.1.4.1.674.10892.1.300.10.1.2.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.3.1 = 2
1.3.6.1.4.1.674.10892.1.300.10.1.4.1 = 3
1.3.6.1.4.1.674.10892.1.300.10.1.5.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.6.1 = 23
1.3.6.1.4.1.674.10892.1.300.10.1.7.1 = 'Main System
Chassis'
1.3.6.1.4.1.674.10892.1.300.10.1.8.1 = 'Dell Inc.'
1.3.6.1.4.1.674.10892.1.300.10.1.9.1 = 'PowerEdge
2650'
1.3.6.1.4.1.674.10892.1.300.10.1.10.1 = 'ASSETTAG'
1.3.6.1.4.1.674.10892.1.300.10.1.11.1 = '1234567'
1.3.6.1.4.1.674.10892.1.300.10.1.12.1 = 254
1.3.6.1.4.1.674.10892.1.300.10.1.13.1 = 289
1.3.6.1.4.1.674.10892.1.300.10.1.14.1 = 4
1.3.6.1.4.1.674.10892.1.300.10.1.15.1 = 'SERVER01'
1.3.6.1.4.1.674.10892.1.300.10.1.16.1 =
'20050513095213.000000-360'
1.3.6.1.4.1.674.10892.1.300.10.1.17.1 =
'20050513100052.000000-360'
1.3.6.1.4.1.674.10892.1.300.10.1.18.1 = 'Please set
the value'
1.3.6.1.4.1.674.10892.1.300.10.1.19.1 = 'Please set
the value'
1.3.6.1.4.1.674.10892.1.300.10.1.20.1 = 'Please set
the value'
1.3.6.1.4.1.674.10892.1.300.10.1.21.1 = 3
1.3.6.1.4.1.674.10892.1.300.10.1.22.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.23.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.24.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.25.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.26.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.27.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.28.1 = 8
1.3.6.1.4.1.674.10892.1.300.10.1.29.1 = 2
1.3.6.1.4.1.674.10892.1.300.10.1.30.1 = 1
1.3.6.1.4.1.674.10892.1.300.10.1.31.1 = 15
1.3.6.1.4.1.674.10892.1.300.10.1.32.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.33.1 = 27
1.3.6.1.4.1.674.10892.1.300.10.1.34.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.35.1 = 1
1.3.6.1.4.1.674.10892.1.300.10.1.36.1 = 480
1.3.6.1.4.1.674.10892.1.300.10.1.37.1 = 1
1.3.6.1.4.1.674.10892.1.300.10.1.38.1 = 2
1.3.6.1.4.1.674.10892.1.300.10.1.39.1 = 2
1.3.6.1.4.1.674.10892.1.300.10.1.44.1 = 0
1.3.6.1.4.1.674.10892.1.300.10.1.45.1 = 0
556
1.3.6.1.4.1.674.10892.1.300.40.1.1.1.1
1.3.6.1.4.1.674.10892.1.300.40.1.2.1.1
1.3.6.1.4.1.674.10892.1.300.40.1.3.1.1
1.3.6.1.4.1.674.10892.1.300.40.1.4.1.1
1.3.6.1.4.1.674.10892.1.300.40.1.5.1.1
cleared'
1.3.6.1.4.1.674.10892.1.300.40.1.6.1.1
1.3.6.1.4.1.674.10892.1.300.40.1.7.1.1
1.3.6.1.4.1.674.10892.1.300.40.1.8.1.1
'20050513100047.000000-360'
=
=
=
=
=
1
1
8
2
'Log
= 2
= 3
=
557