Dell B-DCX-4s Replacement Procedure

Add to my manuals
4 Pages

advertisement

Dell B-DCX-4s Replacement Procedure | Manualzz

53-1001795-01

January 31, 2010

PowerConnect B-DCX-4S

Vertical Cable

Management Fingers

Replacement Procedure

Supporting PowerConnect B-DCX-4S Backbone

53-1001795-01

*53-1001795-01*

Notes, Cautions, and Warnings

NOTE

A NOTE indicates important information that helps you make better use of your computer.

CAUTION

See the safety and regulatory information that shipped with your system. For additional regulatory information, see the Regulatory Compliance Homepage on www.dell.com at the following location: www.dell.com/regulatory_compliance.

CAUTION

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

DANGER

A DANGER indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

© 2009 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, Dell

OpenManage and the YOURS IS HERE logo are trademarks of Dell Inc.; Intel, Pentium, and Celeron are registered trademarks of Intel Corporation in the U.S. and other countries; Microsoft, Windows, Windows Server, MS-DOS and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Regulatory Model Codes: Brocade DCX-4S, Brocade DCX

2 PowerConnect B-DCX-4S Vertical Cable Management Fingers Replacement Procedure

53-1001795-01

In this guide

Installing the PowerConnect B-DCX-4S Vertical Cable Management Fingers 3

Time required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Removing the cable management finger assembly. . . . . . . . . . . . . . . . . . . . 3

Replacing the cables management finger assemblies . . . . . . . . . . . . . . . . . 4

Installing the PowerConnect B-DCX-4S Vertical Cable Management

Fingers

The PowerConnect B-DCX-4S comes equipped with two vertical cable management finger assemblies. It can continue to operate during the replacement of the cable management fingers. Due to the horizontal orientation of the blades in the DCX-4S, the finger assemblies are attached to the uprights of the mounting rack.

Time required

The replacement procedure for the cable management fingers takes less than five minutes.

Items required

• One or two DCX-4S vertical cable management finger assemblies.

• A #1 Phillips screwdriver.

Removing the cable management finger assembly

1. Rearrange the cables around one of the cable management finger assemblies.

2. Unscrew and save the three (3) screws holding the finger assembly to the rack upright ( Figure 1

). Support the assembly to prevent it from falling.

3. Remove the cable management finger assembly.

4. If necessary, repeat steps 1-3 for the other finger assembly.

PowerConnect B-DCX-4S Vertical Cable Management Fingers Replacement Procedure

53-1001795-01

3

FIGURE 1

Vertical cable management finger assemblies

Replacing the cables management finger assemblies

1. Position and tighten the three (3) screws to secure the vertical cable management finger assembly to the rack upright.

2. Arrange the cables along the cable management finger assembly.

3. If necessary, repeat

step 1 and step 2 for the other cable management assembly.

4 PowerConnect B-DCX-4S Vertical Cable Management Fingers Replacement Procedure

53-1001795-01

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement