Electrolux EI30GF35JS Owner's Guide

.................................................................. ..................................................................
EN GAS RANGE
USE AND CARE GUIDE
316471403 Rev B October 2012
2
Finding Information
Table of contents
Finding information .................................................. 2
IMPORTANT SAFETY INSTRUCTIONS ................. 3-6
Features ..................................................................... 7
Surface Cooking ................................................... 8-10
•
Cookware ............................................................. 8
•
Before setting surface burners .......................... 8-9
•
Setting surface burners ...................................... 10
•
Home canning .................................................... 10
•
Surface burner positions .................................... 10
Oven Cooking ..................................................... 11-12
•
Oven racks ......................................................... 11
•
Luxury Glide™ oven racks ................................. 12
Setting Oven Controls ....................................... 13-36
•
Oven control display and keys ........................... 13
•
Setting the clock ................................................. 14
•
Changing clock display mode ............................. 14
•
Changing oven temperature display
mode (ºF/ºC) ...................................................... 15
•
Changing between 12-hour energy saving or
continuous bake mode settings .......................... 15
•
Adjusting tone volume ........................................ 16
•
Oven control lock ............................................... 16
•
Timer .................................................................. 17
•
Fast preheat ....................................................... 18
•
Bake .............................................................. 19-20
•
Cook time ........................................................... 21
•
Setting cook time with end time ......................... 22
•
Broil ............................................................... 23-24
•
Conv bake ..................................................... 25-26
•
Conv convert ...................................................... 27
•
Conv roast ..................................................... 28-29
•
Keep warm ......................................................... 30
•
Slow cook ........................................................... 31
•
My favorite .......................................................... 32
•
Adjusting the oven temperature ......................... 33
•
Sabbath mode ............................................... 34-35
•
Restoring control to factory default settings ....... 36
•
Interior oven light ................................................ 36
Self-Clean ............................................................ 37-39
Care & Cleaning ................................................. 40-45
•
Cleaning recommendations ................................ 40
•
Cleaning cooktop and parts ................................ 41
•
Aluminum foil and oven liners ............................ 42
•
Changing oven light ............................................ 42
•
Removing the oven door .................................... 43
•
Replacing the oven door .................................... 44
•
Special door care instructions ............................ 45
Solutions to Common Problems ...................... 46-48
Notes ................................................................... 49-50
Warranty ................................................................... 51
Please read and save this guide
Thank you for choosing Electrolux, the premium
brand in home appliances. This Use & Care Guide
is part of our commitment to customer satisfaction
and product quality throughout the service life of
your new appliance.
We view your purchase as the beginning of a
relationship. To ensure our ability to continue
serving you, please use this page to record
important product information.
Record your purchase
Purchase date
Electrolux model number
Electrolux serial number
Serial plate location: open
storage drawer.
NOTE
Registering your product with Electrolux
enhances our ability to serve you. You can
register online at
www.electroluxappliances.com or by dropping
your Product Registration Card in the mail.
Questions?
For toll-free telephone support in the U.S. and
Canada:
1-877-4ELECTROLUX (1-877-435-3287)
For online support and Internet production
information visit www.electroluxappliances.com
©2012 Electrolux Home Products, Inc.
All rights reserved. Printed in the USA
IMPORTANT SAFETY INSTRUCTIONS
Recognize safety symbols, words and
labels
Safety items throughout this manual are labeled
with a WARNING or CAUTION based on the risk
type as described below:
WARNING
This symbol alerts you to situations that may cause
serious body harm, death or property damage.
CAUTION
This symbol alerts you to situations that may cause
bodily injury or property damage.
Read all of the following safety instructions
before using this appliance:
WARNING
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or death.
For your safety:
• Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this or any other appliance.
• Installation and service must be performed by
a qualified installer, servicer or the gas
supplier.
What to do if you smell gas:
• Do not try to lite any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the
fire department.
WARNING
Do not store items of interest to children in
the cabinets above a range or on the
backguard of a range. Children climbing on the
range to reach items could be seriously injured.
Save these instructions for future
reference.
WARNING
• Never use this appliance as a space heater
to heat or warm the room. Doing so may
result in carbon monoxide poisoning.
• Never cover any slots, holes or passages in
the oven bottom or cover an entire rack
with materials such as aluminum foil. Doing
so blocks air flow through the oven and may
cause carbon monoxide poisoning. Aluminum
foil linings may trap heat, causing a fire
hazard.
• Stepping, leaning or sitting on the doors or
drawers of this range can result in serious
injuries and also cause damage to the
range. Do not allow children to climb or play
around the range. The weight of a child on an
open door may cause the range to tip,
resulting in serious burns or other injury.
• Do not use the oven or Warmer oven/Lower
Oven (if equipped) for storage.
WARNING
Tip Over Hazard
• A child or adult can tip the
range and be killed.
• Verify the anti-tip device has
been installed to floor or wall.
• Ensure the anti-tip device is re-engaged when
the range is moved to floor or wall.
• Do not operate the range without the anti-tip
device in place and engaged.
• Failure to follow these instructions can result
in death or serious burns to children and
adults.
Range
leveling leg
Anti-Tip
bracket
To check if the anti-tip bracket is installed
properly, use both arms and grasp the rear edge
of range back. Carefully attempt to tilt range
forward. When properly installed, the range
should not tilt forward.
Refer to the anti-tip bracket installation
instructions supplied with your range for proper
installation.
3
4
IMPORTANT SAFETY INSTRUCTIONS
• Remove all tape and packaging before using
the range. Destroy the carton and plastic bags
after unpacking the range. Never allow children
to play with packaging material.
• Proper Installation—Be sure your appliance
is properly installed and grounded by a
qualified technician in accordance with the
National Fuel Gas Code ANSI Z223- latest
edition, or in Canada CAN/CGA B149.1 and
CAN/GGA B149.2, and the National Electrical
Code ANSI/NFPA No.70-latest edition, or in
Canada CSA Standard C22.1, Canadian
Electrical Code, Part 1, and local code
requirements. Install only per installation
instructions provided in the literature package for
this range.
Ask your dealer to recommend a qualified
technician and an authorized repair service.
Know how to disconnect the power to the range
at the circuit breaker or fuse box in case of an
emergency.
• User servicing—Do not repair or replace any
part of the appliance unless specifically
recommended in the manuals. All other
servicing should be done only by a qualified
technician. This may reduce the risk of personal
injury and damage to the range.
• Never modify or alter the construction of a
range by removing leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other
part of the product.
• Air curtain or other overhead range hoods,
which operate by blowing a downward air
flow on to a range, shall not be used in
conjunction with gas ranges other than when
the hood and range have been designed,
tested and listed by an independent test
laboratory for use in combination with each
other.
• Storage in or on Appliance—Flammable
materials should not be stored in an oven,
warmer drawer, near surface burners or in
the storage drawer. This includes paper, plastic
and cloth items, such as cookbooks, plasticware
and towels, as well as flammable liquids. Do not
store explosives, such as aerosol cans, on or
near the range.
• Remove the oven door from any unused
range if it is to be stored or discarded.
IMPORTANT
Do not attempt to operate the range during a
power failure. If the power fails, always turn off
the range. If the range is not turned off and the
power resumes, the range will begin to operate
again. Once the power resumes, reset the clock
and oven function.
• Do not leave children alone—Children should
not be left alone or unattended in the area
where appliance is in use. They should never
be allowed to sit or stand on any part of the
appliance.
• DO NOT TOUCH SURFACE BURNERS,
AREAS NEAR THESE BURNERS, OVEN
BURNERS OR INTERIOR SURFACES OF THE
OVEN. Both surface and oven burners may be
hot even though flames are not visible. Areas
near surface burners may become hot enough to
cause burns. During and after use, do not touch,
or let clothing or other flammable materials touch
these areas until they have had sufficient time to
cool. Among these areas are the cook top,
surfaces facing the cook top, the oven vent
openings and surfaces near these openings,
oven door and window.
• Wear proper apparel—Loose-fitting or
hanging garments should never be worn
while using the appliance. Do not let clothing or
other flammable materials contact hot surfaces.
• Do not use water or flour on grease fires—
Smother the fire with a pan lid, or use baking
soda, a dry chemical or foam-type
extinguisher.
• When heating fat or grease, watch it closely.
Fat or grease may catch fire if allowed to
become too hot.
• Use only dry potholders - Moist or damp
potholders on hot surfaces may result in
burns from steam. Do not let potholders touch
hot heating elements. Do not use a towel or other
bulky cloth instead of a potholder.
• Do not heat unopened food containers Buildup of pressure may cause container to
burst and result in injury.
IMPORTANT SAFETY INSTRUCTIONS
Important instructions for using your
cooktop
WARNING
Use Proper Flame Size—Adjust flame size so it
does not extend beyond the edge of the utensil.
The use of undersized utensils will expose a
portion of the burner flame to direct contact and
may result in ignition of clothing. Proper
relationship of utensil to flame will also improve
efficiency.
• Know which knob controls each surface
burner. Place a pan of food on the burner before
turning it on, and turn the burner off before
removing the pan.
• Always turn knob to the full LITE position
when igniting top burners. Visually check that
burner has lit. Then adjust the flame so it does
not extend beyond the edge of the utensil.
• Utensil Handles Should Be Turned Inward
and Not Extend Over Adjacent Surface
Burners—To reduce the risk of burns, ignition of
flammable materials, and spillage due to
unintentional contact with the utensil, the handle
of the utensil should be positioned so that it is
turned inward, and does not extend over
adjacent surface burners.
• Never leave surface burners unattended at
high heat settings—Boilovers cause smoking
and greasy spillovers that may ignite, or a pan
that has boiled dry may melt.
• Protective Liners—Do not use aluminum foil to
line surface burner pans, or oven bottom, except
as suggested in this manual. Improper
installation of these liners may result in risk of
electric shock, or fire.
• Glazed cooking utensils—Only certain types of
glass, glass/ceramic, ceramic, earthenware, or
other glazed utensils are suitable for cook top
service without breaking due to the sudden
change in temperature. Check the
manufacturer’s recommendations for cook top
use.
Important instructions for using your
oven
• Use care when opening oven door or lower
oven drawer (if equipped)—Stand to the side of
the range when opening the door of a hot oven.
Let hot air or steam escape before you remove
or replace food in the oven.
• Keep Oven Vent Ducts Unobstructed. The
oven vent is located below the backguard.
Touching the surfaces in this area when the oven
is operating may cause severe burns. Also, do
not place plastic or heat-sensitive items on or
near the oven vent. These items could melt or
ignite.
• Placement of oven racks. Always place oven
racks in desired location while oven is cool. If
rack must be moved while oven is hot use
extreme caution. Use potholders and grasp the
rack with both hands to reposition. Do not let
potholders contact the hot heating elements in
the oven. Remove all utensils from the rack
before moving.
• Do not use the broiler pan without insert. The
broiler pan and insert allows dripping fat to drain
and be kept away from the high heat of the
broiler.
• Do not cover the broiler insert with aluminum
foil. Exposed fat and grease could ignite.
• Cold temperatures can damage the electronic
control. When using the appliance for the first
time, or when the appliance has not been used
for an extended period of time, be certain the unit
has been in temperatures above 32°F (0°C) for
at least 3 hours before turning on the power to
the appliance.
Important Safety Notice
The California Safe Drinking Water and Toxic
Enforcement Act requires the Governor of
California to publish a list of substances known to
the state to cause cancer, birth defects or other
reproductive harm, and requires businesses to
warn customers of potential exposure to such
substances.
5
6
IMPORTANT SAFETY INSTRUCTIONS
Important cleaning instructions
• Clean the range regularly to keep all parts
free of grease that could catch fire. Pay
particular attention to the area underneath each
surface element. Do not allow grease to
accumulate.
• Kitchen cleaners and aerosols—Always
follow the manufacturer’s recommended
directions for use. Be aware that excess
residue from cleaners and aerosols may ignite
causing damage and injury.
Grounding Instructions
For personal safety, this appliance must be properly
grounded. For maximum safety, the power cord
must be plugged into an electrical outlet that is
correctly polarized and properly grounded. If a 2prong wall receptacle is the only available outlet, it
is the personal responsibility of the consumer to
have it replaced with a properly grounded 3-prong
wall receptacle installed by a qualified electrician.
Self cleaning ovens
• Clean in the self-cleaning cycle only the parts
listed in this Use & Care Manual. Before self
cleaning the oven, remove the broiler pan and
any utensils or foods from the oven.
• Do not use oven cleaners—No commercial
oven cleaner or oven liner protective coating of
any kind should be used in or around any part of
the oven.
• Do not clean door gasket—The door gasket is
essential for a good seal. Care should be taken
not to rub, damage or move the gasket.
• The health of some birds is extremely sensitive
to the fumes given off during the self-cleaning
cycle of any range. Move birds to another wellventilated room.
Conversion to L.P. Gas
WARNING
• Personal injury or death from electrical shock
may occur if the conversion to L.P. gas is not
made by a qualified installer or electrician.
• Any additions, changes or conversions
required in order for this appliance to
satisfactorily meet the application needs must
be made by a qualified technician.
This appliance allows for conversion to Liquefied
Petroleum (L.P.) Gas.
If L.P. conversion is needed, contact your local L.P.
Gas provider for assistance. The L.P. conversion kit
is provided with this appliance and is located on the
lower REAR (back side) panel of the range. Before
installing the kit be sure to read the L.P. Installation
Instructions and follow them carefully when making
the installation.
WARNING
• Avoid fire hazard or electrical shock. Do not
use an adapter plug, an extension cord, or
remove grounding prong from electrical power
cord. Failure to follow this warning can cause
serious injury, fire or death.
• This appliance is equipped with a 3-prong
grounding plug for your protection against
shock hazard and should be plugged directly
into a properly grounded receptacle. Do not
cut or remove the grounding prong from this
plug.
See the INSTALLATION INSTRUCTIONS
packaged with this appliance for complete
installation and grounding instructions.
Features
Range features
2
Your gas range features include:
1. Membrane touch control panel
1
2. Oven digital control display, timer and oven
controls
3. Sure-2-fit™ cobalt blue self-cleaning oven
interior
14
4. Self-clean oven door latch
5. Automatic interior oven door light switch
4
5
3
6. Interior oven light
6
7. Perfect-Convect3™ convection fan system
7
8. Extendable Luxury-Glide™ telescoping interior
oven rack(s)
9. Interior oven racks (not shown, types may vary
by model)
11
12
11. Color coordinated or stainless steel oven
exterior panels & trim
12. Full-width tinted oven door window glass
13. Storage drawer
13
14. Easy-to-clean upswept cooktop.
16
16. Leveling legs & anti-tip bracket (included)
17. Broiler pan
18. Broiler pan insert
15
18
17
9
10
10. Large 1-piece metal upper & lower oven door
handles
15. Gas cooktop
8
7
8
Surface Cooking
Cookware
Using proper cookware
The size and type of cookware used will influence
the setting needed for best cooking results.
Cookware should have flat bottoms that make good
contact with the entire burner grate surface. Check
for flatness by rotating a ruler across the bottom of
the cookware.
Before setting surface
burners
Check burner cap placement before operating
the surface burners
CAUTION
• To prevent flare-ups and avoid creation of
harmful by-products, do not use the cooktop
without all burner caps properly installed to
insure proper ignition and gas flame size.
• Do not use the surface burners without the
burner caps and burner grates properly
installed. Missing pieces or improper
installation may lead to spills, burns, or
damage to your range and cookware.
Cookware should always:
• Have flat bottoms.
• Have tight fitting lids.
• Be well-balanced.
• Be made of material that conducts heat well.
• Be easy to clean.
It is very important to be sure that all surface
burner caps and burner grates are properly installed
and in the correct locations BEFORE operating the
cooktop burners.
Remember:
• Always keep surface burner caps in place
whenever using a surface burner.
Cookware material types
• When placing the burner caps, be sure that all
burner caps are seated firmly and rest level on
top of burner heads.
The cookware material determines how evenly and
quickly heat is transferred from the surface burner
to the pan bottom. The most popular materials
available are:
• For proper flow of gas and ignition of burners DO
NOT allow spills, food, cleaning agents or any
other material to enter the gas orifice port
opening.
• Aluminum - Excellent heat conductor. Some
types of food will cause it to darken (Anodized
aluminum cookware resists staining & pitting).
• Copper - Excellent heat conductor but discolors
easily.
• Stainless steel - Slow heat conductor with
uneven cooking results. Is durable, easy to clean
and resists staining.
• Cast iron - A poor heat conductor however will
retain heat very well. Cooks evenly once cooking
temperature is reached.
• Porcelain-enamel on metal - Heating
characteristics will vary depending on base
material.
• Glass- Slow heat conductor.
Surface Cooking
Before setting surface
burners (con’t)
On round style burners, the burner cap lip
(Figure 1,) should fit snug into the center of burner
head and rest level. Refer to Figures 2 and 3 for
correct and incorrect burner cap placement. Once
in place, you may check the fit by gently sliding the
burner cap from side to side (Figure 4) to be sure it
is centered and firmly seated. When the burner cap
lip makes contact inside the center of the burner
head you will be able to hear the burner cap click.
Please note that the burner cap should NOT move
off the center of the burner head when sliding from
side to side.
Check and be sure that all oval style burner caps
are correctly in place on oval burner heads.
Correct burner cap
placement
Fig. 2
Incorrect burner cap
placement
Fig. 3
Installing burner grates
Make sure the burner grates are properly placed on
the cooktop before using the surface burners. The
grates are designed to rest inside the recess on the
cooktop.
To install burner grates, place grates flat-side down
and align into the cooktop recess. Grates should
rest flush against each other and against the sides
of the recess (see Figure 5).
Fig. 4
burner cap
burner cap lid
burner head
Fig. 1
Fig. 5
9
10
Surface Cooking
Setting surface burners
Surface burner positions
1. Push the desired gas surface control knob in
and turn counterclockwise out of the OFF
position (Figure 1).
2. Turn knob to
(lite) position. Visually check
2
that the needed burner has lit.
5
3. To adjust, turn counterclockwise to a flame
size setting that best fits your need.
3
1
1
4
2
3
4
5
1. Standard burner -9.5K BTU- best for most
surface cooking requirements.
Fig. 1
Home canning
Be sure to read and observe all the following points
when home canning using your appliance. Review
the latest online information available for home
canning, such as the U.S. Department of
Agriculture or the National Center for Home Food
Preservation (NCHFP).
• Use only quality flat bottom canners when home
canning. Use a straight-edge to check canner
bottom.
• Start with hot tap water to bring water to boil
more quickly.
• Use the highest heat seating when first bringing
the water to a boil. Once boiling is achieved,
reduce heat to lowest possible setting to
maintain that boil.
• Make sure the diameter of the canner does not
exceed 1 inch beyond the burner grate
2. Medium burner -12K BTU- best for most
surface cooking requirements.
3. Oval center burner -10K BTU- best for
griddles.
4. Fast Boil™ burner -18,000 BTU - best for
bringing large quantities of liquid to boil or
when preparing large quantities of food.
5. Perfect Simmer™ burner -5,000 BTU- best for
simmering delicate sauces, melting
chocolates, etc.
Oven vent location
The oven vent is located below the backguard.
When the oven is on, warm air is released through
this vent. This venting is necessary for proper air
circulation and provides good baking results in the
oven. DO NOT BLOCK THIS VENT.
Oven vent location
Oven Cooking
Oven racks
CAUTION
Always use potholders or oven mitts when
removing food or adjusting the oven racks. Wait
until the oven has completely cooled if possible.
Oven racks may be HOT and may cause burns.
Air circulation in the oven
For best air circulation when baking, allow a space
of 2-4 inches (5-10 cm) around the cookware for
proper air circulation. Be sure pans and cookware
do not touch each other, the oven door, sides or
back of the oven cavity.
Hot air must be able to circulate around cookware
for even heat to reach the food.
Removing and replacing flat or offset
oven racks
Types of oven racks
Your appliance may be equipped with any one or
more of the following oven rack types:
Flat oven rack
Fig. 2
Offset oven rack
(some models)
Fig. 3
• To remove - pull the oven rack straight forward
until it reaches the stop position. Lift up front of
oven rack slightly and slide out.
• To replace - place the oven rack on the rack
guides on the oven walls. Tilt the front of the rack
upward slightly and slide the oven rack back into
place.
Fully extendable
Luxury-Glide™ oven rack
Fig. 4
Flat oven racks may be used for most cooking
needs and may be placed in most oven rack
positions.
The offset oven rack (some models, see Figure 3)
provides additional stepdown positions from the
standard flat rack design. The offset design
positions the base of the rack about 1/2 of a rack
position lower than the flat rack and may be used in
most oven rack positions.
The fully extendable Luxury-Glide™ oven rack
(see Figure 4) allows you to effortlessly extend your
food away from the oven. See Removing and
Replacing the Luxury-Glide™ Oven Racks for
instructions.
11
12
Oven Cooking
Luxury Glide™ oven racks
IMPORTANT
Remove ALL oven racks before starting a selfclean cycle. If oven racks are left inside the oven
during a cleaning cycle, the slide ability of the
Luxury-Glide™ oven racks may be damaged and
all of the oven racks will lose their shiny finish.
Clean oven racks according to the instructions
provided in the Care & Cleaning section.
The fully extendable Luxury-Glide™ rack makes
food preparation easier. This oven rack has glide
tracks that allow the rack to be pulled away from
the oven without rubbing the sides of the oven wall.
Luxury-Glide™ extendable oven
rack
release
lever
Fig. 1
Removing and replacing the
Luxury-Glide™ oven racks
To remove - Using one hand, reach through handle
opening and lift up on the release lever located
across the lower front of the rack as shown in
Figure 1.
Fig. 2
While holding up the release lever, pull the glide
rack out of the oven until the stop position is
reached (see Figure 2). Using both hands, grasp
the upper and lower portions of the glide rack. Lift
up the front of the rack slightly and continue to pull
the rack away from the oven (see Figure 3). Be
sure to grasp both upper and lower rack portions
together when removing or handling the glide rack .
The rack portions move independently and are
difficult to handle unless held together.
To replace - grasp both upper and lower portions of
glide rack, lift and hold the rack level between the
oven cavity walls. Tilt the front of the rack upward
slightly and slide the rack completely into position.
Some force may be necessary to make sure the
oven rack has snapped completely into place.
Fig. 3
IMPORTANT
To prevent possible damage to the oven, DO
NOT attempt to close the oven door until all the
oven racks are fully positioned back inside the
oven cavity.
upper rack
portion
lower rack
portion
Setting Oven Controls
Oven control display and keys
10
2
1
3
5
4
6
11
8
7
9
18
13
12
15
14
17
16
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Bake
Broil
Fast Preheat
Convection Bake
Convection Roast
Convection Convert
Keep Warm
Slow Cook
My Favorite
Oven display
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
19
Cook Time
End Time
Set Clock
Oven Timer
Control Lock
Oven Light
Self-clean
Numeric Key Pad
Start
Cancel
Minimum & maximum control settings
Max.temp
20
Minimum & maximum time settings
Feature
Feature
Min. temp
Fast Preheat
170°F / 76°C
550°F / 288°C
Timer
Bake
170°F / 76°C
550°F / 288°C
Broil
400°F / 204°C
Conv Bake
Min. time
Max. time
1 min
11 hr 59 min
Clock 12 hr
1:00 hr
11 hr 59 min
550°F / 288°C
Clock 24 hr
0:00 hr
23 hr 59 min
300°F / 148°C
550°F / 288°C
Cook time 12 hr
1 min
11 hr 59 min
Conv Roast
300°F / 148°C
550°F / 288°C
End time 12 hr
1:00 hr
12 hr 59 min
Keep Warm
150°F/66°C
190°F/88°C
End time 24 hr
0:00 hr
23 hr 59 min
Lo (225°F /108°C) Hi (275°F / 135°C)
Clean duration
(2 hr)
(4 hr)
Slow Cook
13
14
Setting Oven Controls
Setting the clock
Changing clock display mode
When the appliance is powered up for the first time or
when the electric supply to the appliance has been
interrupted, the display will flash "12:00" (Figure 1).
The oven control is factory preset to display the
time of day with a 12-hour clock setting. The
display can be changed to provide the time of day
using a 24-hour clock display or the clock display
may be turned OFF.
When the clock display is turned OFF, the clock
continues to run in the background on the
previously chosen 12-hour or 24-hour mode.
Fig. 1
To set the clock for 1:30:
To change clock display modes:
Example
Step
Example
Press
1. Press set clock.
2. Enter 130 using the numeric
keypad.
130
3. Press START to accept.
NOTES
• Be sure to set the clock with the correct time
of day before using the oven, especially
cooking with added time instructions.
• The clock cannot be adjusted when the oven
is cooking, when the timer is active or during
self-clean.
• If an invalid time of day is entered, the control
will sound a triple beep (error tone). Re-enter
a valid time of day and press START. If
CANCEL is pressed the clock will set for
12:00.
Step
Press
1. Press and hold set clock
for 6 seconds.
2. Press set clock to toggle between
"12 Hr dAY", "24 Hr dAY" or
"CLO OFF" display choices.
Release keypad when the desired
mode appears (Figures 1, 2 and
3).
3. Press START to accept.
Fig. 1
Fig. 2
Fig. 3
NOTE
• The clock display mode cannot be modified
when the oven is active with any cooking
function or during self-clean.
Setting Oven Controls
Changing oven temperature
display mode (°F or °C)
The oven control is factory preset to display oven
temperatures with Fahrenheit (°F) values. The
control may be changed to display either Fahrenheit
or Celsius (°C) temperatures.
To change the temperature display mode:
Changing between 12-Hour
Energy Saving or continuous
bake mode settings
The oven control is factory preset for a 12-Hour
Energy Saving mode. This setting automatically
turns the oven off after 11 hours and 59 minutes of
continuous cooking. The control may be set to
override this feature.
Example
Step
Press
1. Press and hold broil key for 6
seconds. Release when "F" or "C"
appears in display.
2. Press broil to toggle between "F"
or "C" temperature display choices.
Release key when desired mode
appears in display (Figures 1 and
2).
3. Press START to accept.
Fig. 1
To change between 12-Hour Energy Saving or
continous bake settings:
Example
Step
Press
1. Press and hold timer on-off key for 6
seconds.
2. Press timer on-off to choose between
"12 Hr OFF" (Figure 3) or "StAY On"
(Figure 4). Release key.
3. Press START to accept.
Fig. 2
NOTE
The temperature display mode cannot be
modified when the oven is active or once selfclean is set.
Fig. 3
Fig. 4
NOTE
Changing between the 12-Hour Energy Saving
or continuous bake mode will not change how
the cooktop controls operate.
15
16
Setting Oven Controls
Adjusting tone volume
Oven control lock
A tone will sound when a key is pressed and at the
end of a cycle (timer, cook time or end time). The
factory audio setting is preset to the highest level
(5). The control may be adjusted for lower levels 1
through 5, or OFF.
The control lock will lock the oven controls and the
oven door. This feature does not lock the cooktop
controls.
Examples
Step
To adjust audio tone level:
Example
Step
Press
1. Press and hold end time for 6
seconds (AUd will appear on left
side of display window) then release
keypad.
2. To toggle through the available
audio levels press and continue to
press end time. When the level you
prefer is displayed release the
keypad. Level 5 is the highest
setting -Fig.1-, 1 is the lowest setting
-Fig. 2- and AUd OFF - Fig. 3 -will
provide a silent control setting.
Press
To activate the control lock:
Press and hold control lock key for 3
seconds. "door Loc" will appear in the
display until the oven door is locked.
To cancel control lock:
Press and hold control lock key for 3
seconds. Once the oven door is
unlocked, the "door Loc" message
will no longer display (Figure 1).
3. Press START to accept.
control
lock
control
lock
Fig. 1
NOTES
Fig. 1
Fig. 2
Fig. 3
NOTE
When the control is set for Aud OFF, error tones
will remain audible.
• To avoid possible damage to the oven door
locking mechanism, do not attempt to force
the oven door open when the door Loc
message is displayed.
• If an oven control key is pressed when oven
lock is active, the oven will sound an error
tone (triple beep) indicating the function is not
available until the control lock feature is
turned off.
Setting Oven Controls
Timer
The timer may be used to help time cooking or food
preparation times without interfering with any active
cooking process. When the timer countdown
reaches less than 1 minute, the display will show
time remaining in seconds. When the time runs out
the timer will beep, "End" will flash in the display.
Timer settings:
• Minimum set time: 1 minute
• Maximum set time: 11 hours 59 minutes
How to set the timer for 5 minutes:
Example
Step
Press
1.Press timer on-off.
2.Enter 5 minutes using
numeric keypad.
3.Press start.
To cancel an active timer at anytime, press the
timer on-off keypad.
NOTES
• The timer does not start or stop the cooking
process. The timer may be started alone or
with any other active oven feature.
• The timer will display hours and minutes until 1
hour remains. When less than 1 hour remains,
the display will count down in minutes and
seconds. Once the timer has less than 1
minute remaining, only seconds will display.
• If both the oven and timer are active, the timer
information will display by default. To
momentarily display information for any other
active oven feature, press the corresponding
key once for the other feature.
17
18
Setting Oven Controls
Fast preheat
Use the fast preheat option for single rack baking
to quickly bring the oven to baking temperature.
The fast preheat option must be set using the bake
or conv bake feature. Fast preheat may be set
with cook time or cook time with an end time. The
following oven temperature settings apply for fast
preheat:
• Factory default temperature: 350°F/176°C
• Minimum fast preheat setting: 170°F / 77°C
• Maximum fast preheat setting: 550°F / 288°C
How to set fast preheat with the oven
temperature set for 425°F/ 218°C ):
Example
Step
Press
1. Press bake or conv bake
or
2. Enter 4 2 5 using
numeric keypads
3. Press fast preheat
For best results
4. Press START
• Recommended for single oven rack cooking
ONLY. Use oven rack position 2 or 3.
• For batter and dough-based baked goods such
as cakes, pastries, and breads, use the
standard bake function for best results.
To set fast preheat using the default oven
temperature:
Example
Step
Press
1. Press bake or conv bake.
To stop fast preheat at any time press CANCEL.
NOTES
• To change temperature settings after fast
preheat has started, press bake key, enter the
desired temperature with the numeric keypad,
and press START to accept.
• To change cooktime settings after fast preheat
has started, press cooktime key, enter the
desired time with the numeric keypad, and
press START to accept.
or
2. Press fast preheat.
IMPORTANT
Once the oven has fully preheated, the fast
preheat feature will perform like bake and
continue to bake until cancelled.
3. Press START.
When activated, the oven will begin preheating and
"PRE "will appear in the display (-Fig. 1-).
Fig. 1
A tone will sound indicating the oven has finished
preheating. Place prepared food inside oven using
a single oven rack.
To stop preheating at any time press CANCEL.
Setting Oven Controls
Bake
Use bake to cook most food items that require
normal cooking temperatures. Bake may be set
with the following options:
• Fast preheat
• Cook time and Cook time with end time setting
To set bake with the oven temperature set for
425°F/ 218°C ):
Example
Step
Press
The following oven temperature settings apply
to the bake feature:
1. Press bake
• Factory default bake setting: 350°F/176°C
2. Enter 4 2 5 using numeric
keypad
• Minimum bake setting: 170°F / 77°C
• Max. bake setting: 550°F / 288°C
To set the oven for bake at the factory default
oven temperature of 350°F (176°C):
Example
Step
Press
3. Press START
To stop bake at any time press CANCEL.
NOTES
1. Press bake. The default oven
temperature of 350°F will appear in
the display.
• A cook time setting may be be added any
time after starting bake. Refer to the cook
time section for complete instructions.
2. Press START (Figure 1).
• If bake is active without a cook time setting,
the oven will remain on for 12 hours before
automatically turning off unless cancelled. If
you wish to bake for longer than 12 hours, see
"Changing between 12-Hour Energy Saving or
continuous bake mode settings" for
instructions.
Fig. 1
Once bake is active the oven will begin preheating.
When the oven reaches set temperature the control
will sound a tone indicating the oven is ready.
To stop bake at any time press CANCEL.
CAUTION
• Always use pot holders or oven mitts when
working with a hot oven. When cooking, the
oven interior, oven racks and cooktop will
become hot enough to cause burns.
• Do not cook foods directly on the oven
bottom. To avoid damaging the oven interior
and surfaces, always cook foods in the oven
using cookware positioned on an oven rack.
19
20
Setting Oven Controls
Bake (cont’d)
For best results
• Fully preheat the oven before baking items like
cookies, biscuits and breads.
• When using any single rack, position the rack so
that the food is in the center of the oven.
• For best results when baking cakes using 2 oven
racks, place the Luxury Glide™ rack in position 4
and a flat rack in position 2 (Figure 1).
• If using two flat racks, place racks in positions 2
and 5 (Figure 1).
• When baking using 2 oven racks, position
cookware as shown in Figure 2. Allow at least 2
inches (5 cm) of space between cookware for
proper air circulation.
6
5
4
3
2
1
Fig. 1
• Dark or dull pans absorb more heat than shiny
bakeware, resulting in dark or overbrowning of
foods. It may be necessary to reduce the oven
temperature or cook time to prevent
overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are
recommended for cakes, cookies, and muffins.
• Use the convection bake function for cookies.
Fig. 2
Setting Oven Controls
Cook time
The cook time feature is used when a recipe calls
for a specific temperature and cook time. Following
the recipe’s suggested cook time can help ensure
the best possible results.
The maximum cook time setting is 11 hours, 59
minutes. Cook time instructions may be set
with the following features:
When the cook time runs out:
"End" will appear in the display window and the
oven will shut-off automatically (Figure 2).The
control will beep 3 times every 30 seconds until the
cancel keypad is pressed.
• Bake
• Conv bake
Fig. 2
• Conv roast
To stop cooking at any time press CANCEL.
• Slow cook
• Keep warm
WARNING
• Fast preheat
• My favorite
To bake for 30 minutes with the oven default
temperature setting of 350°F (176°C):
NOTES
Example
Step
FOOD POISONING HAZARD. Do not let food sit
for more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
Press
1. Press cook time.
• When cooking with a cook time setting, press
the active cook time key once to momentarily
display any remaining cook time.
2. Enter 30 using numeric keypads.
• When cooking with cook time settings, the
cook time may be removed at anytime by
setting a new cook time of 0:00.
3. Press START.
• Cook time settings cannot be added to the broil
or self-clean features.
4. Press bake.
5. Press START (Figure 1).
Fig. 1
Once active, the oven display will show "TIMED"
and "BAKE" (Figure 1). The oven will cook at the
set temperature for 30 minutes and then
automatically shut-off.
21
22
Setting Oven Controls
Setting cook time with end time
Adding a cook time with a specific end time gives
the same benefits as the cook time option in
addition to controlling exactly when the cooking
process will begin and end.
Cook time and end time instructions may be set
with the following features:
Fig. 1
• Slow cook
Once START is pressed, the oven will calculate the
delayed start time. Once the delayed start time has
passed, the oven will automatically turn on and heat
to the set temperature. The oven will continue to
maintain this temperature during the set cook time
until reaching the set end time.
• Keep warm
When the cook time runs out:
• Bake
• Conv bake
• Conv roast
IMPORTANT
Before setting end time instructions, be sure the
time of day is correct.
"End" will appear in the display window and the
oven will shut-off automatically (Figure 2). The
control will beep 3 times every 30 seconds as a
reminder until the CANCEL keypad is pressed.
To set the oven to bake at 375°F (191°C) for 50
minutes and to automatically shut-off at 5:30:
Example
Step
1. Press cook time.
2. Enter 50 mintues using
numeric keypads.
3. Press START.
4. Press end time.
5. Enter 530 using
numeric keypads.
6. Press start.
7. Press bake (Figure 1).
8. Enter 375 using numeric
keypads.
9. Press START to activate.
Fig. 2
Press
To stop cooking at any time press CANCEL.
CAUTION
Use caution when preparing foods with cook
time or end time instructions. Foods that can
easily spoil such as milk, eggs, fish, meat or
poultry, should be chilled in the refrigerator first.
Even when chilled, they should not stand in the
oven for more than 1 hour before cooking
begins, and should be removed promptly when
done.
NOTES
also
choose
use
TIME
• • AnYou
endmay
time
setting
maytobe
setCOOK
with fresh
with no
ENDtoTIME.
clean.
Refer
the fresh clean section for
details on how to select different clean cycle
times.
• The end time setting may be added to the fast
preheat, conv bake or conv convert features.
An end time setting cannot be added to broil.
• Once the end time feature has started the
cooking process, press the cook time keypad
once to display any cook time remaining.
Setting Oven Controls
Broil
Use the broil feature to cook meats that require
direct exposure to radiant heat for optimum
browning results.
To set broil with the factory default temperature
setting of 550°F / 288°C:
Example
The following oven temperature settings apply
to the broil feature:
Step
• Factory default temperature: 550°F / 288°C
1. Place the broiler insert on the broiler pan,
then place the meat on the insert. Remember
to follow all warnings and cautions.
• Min. broil setting: 400°F / 205°C
• Max. broil setting: 550°F / 288°C
WARNING
Should an oven fire occur, close the oven door.
If the fire continues, throw baking soda on the fire
or use a fire extinguisher. Do not put water or
flour on the fire. Flour may be explosive and
water can cause a grease fire to spread and
cause personal injury.
CAUTION
Press
2. Arrange the interior oven rack to rack position
recommendations. See Figures 3 and 4 on
the next page. Be sure to place the pan with
meat directly under broil element.
3. Press broil.
4. Press START.
5. Turn meat when desired doneness
for first side is obtained.
• Always use pot holders or oven mitts when
working with a hot oven. When broiling, the
oven interior, oven racks and cooktop will
become hot enough to cause burns.
• Do not use the broiler pan without the insert.
Fig. 1
• Do not cover the broil pan/insert with
aluminum foil; the exposed grease could
ignite.
Once activated, the oven display will show "BROIL"
(Figure 1) and will broil at the set temperature until
cancelled.
• To prevent food from contacting the broil
element and to prevent grease splattering, do
not use the roasting rack when broiling.
To stop broil at anytime press CANCEL.
For best results
• For optimum browning results, allow the oven to
preheat 5-6 minutes before placing meat in the
oven.
• To avoid burning food, watch the food carefully
when broiling and turn meat when needed.
• Use the recommended pans and oven rack
positions for the type and amount of meat being
prepared. See Broiling Table on the next page.
23
24
Setting Oven Controls
Broil (con’t)
The broil pan insert has slots that allow grease and
fat from the meat to drain into the broil pan. Place
prepared meat on broil pan insert and then place
onto broiler pan as shown in Figure 1.
6
Recommended broiling times
5
Use the broiling table (Figure 3) for approximate
recommended broiling times for the types of meats
listed. Increase or decrease broiling times, or move
the broiling pan to a different rack position to suit for
doneness.
4
If the food you are broiling is not listed in the table,
follow the instructions provided in your recipe and
watch the item closely.
3
2
1
Fig. 2
Broil pan insert
Broil pan
Fig. 1
Broiling Table
Food
Steak 1” thick
Steak 1” thick
Steak 1” thick
Pork chops 3/4” thick
Chicken-bone in
Chicken-boneless
Fish
Shrimp
Hamburger 1” thick
Hamburger 1” thick
Rack position
5th or 6th*
5th or 6th*
5th or 6th*
5th
4th
5th
5th
4th
6th*
5th
Temp
Cook time in minutes
1st side
2nd side
550°F
550°F
550°F
550°F
450°F
450°F
500°F
550°F
550°F
550°F
*Use the off-set rack (if provided) when using oven rack position 6.
Fig. 3
8
6
10
8
12
8
12
8
25
15
12
8
as directed
as directed
17
10
14
12
Doneness
Medium
Medium-well
Well
Well
Well
Well
Well
Well
Medium
Well
Setting Oven Controls
Conv bake
To set conv bake with the factory default
temperature setting of 350°F (176°C):
Example
6
5
4
3
2
1
Fig. 1
Convection (conv) bake uses a fan to circulate
the oven heat evenly and continuously (Figure 1).
The improved heat distribution allows for even
cooking with excellent results. Multiple rack cooking
may slightly increase cook times for some food
types, but the overall result will be time saved.
The conv bake feature should only be used when
your recipe instructions have been written
especially for convection baking.
If your recipe instructions are for baking and you
wish to use conv bake, follow the conv convert
option instructions. The conv convert option will
automatically adjust the oven temperature so that
convection baking will provide the best possible
results.
Benefits of conv bake:
• Superior multiple oven rack performance.
• Foods cook more evenly.
• No special pans or bakeware required.
Conv bake may be set with the following options:
• Conv convert
• Fast preheat
• Cook time or cook time with end time settings
The following temperature settings apply to the
conv bake feature:
• Factory default setting: 350°F/176°C
• Min. bake setting : 300°F / 148°C
• Max. bake setting: 550°F / 288°C
Step
Press
Preheat the oven if needed.
1. Press conv bake.
2. Press START.
When activated, the control display will show
"CONV BAKE" (Figure 2) and the oven will begin
heating. Once the oven reaches the set
temperature a tone will sound indicating the oven is
ready.
Fig. 2
To stop conv bake at anytime press CANCEL.
NOTE
• You
may also
use
COOK
The
convection
fanchoose
will nottorun
during
theTIME
first 6
with
no
END
TIME.
minutes of cooking. This is normal. The fan will
begin to run as the oven approaches the target
temperature.
25
26
Setting Oven Controls
Conv bake (cont’d)
For best results
• Fully preheat the oven before baking items like
cookies, biscuits and breads.
6
• When using any single rack, position the rack so
that the food is in the center of the oven.
5
• For best results when baking cakes using 2 oven
racks, place racks in positions 2 and 4
(Figure 1). Use the Luxury Glide™ rack in
position 4.
• If using two flat racks, place racks in positions 2
and 5 (Figure 1).
• When baking using 2 oven racks, position
cookware as shown in Figure 2. Allow at least 2
inches (5 cm) of space between cookware for
proper air circulation.
4
3
2
1
Fig. 1
• Cookies and biscuits should be baked on pans
with no sides or very low side to allow heated air
to circulate around the food.
• Food items baked on pans with a dark finish will
cook faster.
• Use the radiant bake function for cakes.
Fig. 2
Setting Oven Controls
Conv convert
The convection (conv) convert feature allows you
to convert any normal baking recipe into a
convection bake recipe. The control uses the
normal recipe settings and adjusts to a lower
temperature for convection baking. Conv convert
must be used with conv bake. Conv convert may be
set with cook or end time instructions.
Benefits of conv convert:
To set conv convert for 30 minutes with a
temperature setting of 375°F (191°C):
Example
Step
Press
1. Press cook time.
• Superior multiple oven rack performance.
2. Enter 30 using numeric
kepad.
• Some foods cook faster, saving time and energy.
3. Press START.
• No special pans or bakeware required.
4. Press conv bake.
To set conv convert with the factory default
oven temperature of 350°F (176°C):
Enter 375 using numeric
keypad.
6. Press conv convert.
Example
Step
5.
Press
1. Press conv bake.
2. Press conv convert.
When conv convert is used with cook time or end
time settings, the conv convert feature will display
a "CF" for check food when the cook time is 75%
complete (Figure 2). At this time the oven control
will provide 1 long tone at regular intervals until
the set cook time has finished or conv convert is
canceled.
To stop conv convert at anytime press CANCEL.
Fig. 1
When activated, the control display will show
"CONV BAKE" (Figure 1) and the oven will begin
heating. Once the oven reaches the set
temperature a tone will sound indicating the oven is
ready.
To stop conv convert at anytime press CANCEL.
NOTES
• When using conv convert, cook time
reductions may vary depending on the oven
set temperature.
• Conv convert reduces original
temperatures by 25ºF (14ºC).
• The conv convert feauture will work best if the
cook time is 20 minutes or longer. If a
cooktime is set that is less than 20 mintues,
the feature will not provide a "CF" (check
food) message.
Fig. 2
For best results
• Follow the rack placement and pan position
recommendations in the Convection Bake
section of this Use and Care Guide.
27
28
Setting Oven Controls
Conv roast
To set conv roast with the factory default oven
temperature setting of 350°F (176°C):
6
5
4
Example
Step
Press
1. Press conv roast.
3
2
1
Fig. 1
2. Press START
When activated, the control display will show
"CONV ROAST" and the oven will begin heating.
Once the oven reaches the set temperature a tone
will sound indicating the oven is ready
How conv roast works
Convection (conv) roast combines a cook cycle with
the convection fan and element to rapidly roast
meats and poultry. Heated air circulates around the
meat from all sides, sealing in juices and flavors.
Meats cooked with this feature are crispy and
brown on the outside while staying moist inside.
There is no need to reduce the oven temperature
when using conv roast.
To stop conv roast at anytime press CANCEL.
Conv roast may be set with the following
options:
• Preheating for conv roast will not be necessary
for most meats and poultry.
• Cook time
• Place food items on rack positions 1, 2, or 3,
keeping food in center of the oven cavity (see
Figure 1).
• Cook time with end time
The following oven temperature settings apply for
conv roast:
• Factory default temperature: 350°F/176°C
• Min. conv roast setting: 300°F / 148°C
• Max. conv roast setting: 550°F / 288°C
Benefits of conv roast:
• Superior multiple oven rack performance.
• Some foods will cook faster, saving time and
energy.
NOTE
• You
may also
use
COOK
The
convection
fanchoose
will nottorun
during
theTIME
first 6
with no
END TIME.
minutes
of cooking.
This is normal. The fan will
begin to run as the oven approaches the target
temperature.
Fig. 2
For best results
• Since conv roast cooks faster, reduce cook
times by 25% from the recommended time of
your recipe (check the food at this time). Then if
needed, increase cook time until the desired
doneness is obtained.
• Place food items using the recommended rack
positions for the type of food being prepared.
• Be sure to carefully follow your recipe’s
temperature and time recommendations or refer
to the conv roast recommendations for additional
information. See Figure 2 on the next page.
• Do not cover foods when dry roasting - covering
will prevent the meat from browning properly.
Setting Oven Controls
Conv roast (cont’d)
When preparing meats for conv roast, you should
use the broiler pan and insert. The broiler pan will
catch grease spills and the insert will help prevent
grease splatters.
Insert
1. Place oven rack on bottom or next to the
bottom oven rack position.
2. Place the insert on the broiler pan.
3. Be sure the insert is securely seated on top of
the broiler pan. Do not use the broiler pan
without the insert. Do not cover the insert with
aluminum foil.
Broil pan
4. Place meat (fat side up) on insert (Figure 1).
Place prepared food on oven rack and slide
into the oven.
Fig. 1
Conv Roast Setting Suggestions
Weight
Oven temp
Standing rib roast
4 to 6 lbs.
350°F
*
25-30
Rib eye roast
4 to 6 lbs.
350°F
*
25-30
Tenderloin roast
2 to 3 lbs.
400°F
*
15-25
Turkey, whole**
12 to 16 lbs.
325°F
180°F
8-10
Turkey, whole**
16 to 20 lbs.
325°F
180°F
10-15
Turkey, whole**
20 to 24 lbs.
325°F
180°F
12-16
Chicken
3 to 4 lbs.
350°F -375°F
180°F
12-16
Ham roast, fresh
4 to 6 lbs.
325°F
160°F
30-40
Shoulder blade roast
4 to 6 lbs.
325°F
160°F
20-30
Loin
3 to 4 lbs.
325°F
160°F
20-25
Pre-cooked ham
5 to 7 lbs.
325°F
160°F
30-40
Meat
Beef
Poultry
Pork
Fig. 2
*
**
For beef: medium 160°F, well done 170°F.
Stuffed turkey requires additional roasting time. Shield legs and
breast with foil to prevent overbrowning and drying of the skin.
Internal temp
Minute per lb.
29
30
Setting Oven Controls
Keep warm
Use the keep warm feature to keep hot foods warm.
Keep warm may be set with the following options:
To set keep warm with a setting of 150ºF:
Example
• Cook time
Step
• Cook time with end time
The following temperature settings apply to the
keep warm feature:
Press
1. Press KEEP WARM
• Auto-suggest (default) setting: 170°F / 76°C
• Minimum keep warm setting: 150°F / 66°C
• Maximum keep warm setting: 190°F / 88°C
WARNING
• To prevent food from contacting the broil
element and to prevent grease splattering, do
not use the roasting rack when broiling.
To set keep warm with the default setting:
Example
1. Press KEEP WARM
150
3. Press START
• FOOD POISONING HAZARD. Do not let
food sit for more than one hour before or
after cooking. Doing so may cause bacteria
to grow which can result in food poisoning
or sickness.
Step
2. Enter 150 using numeric
keypad.
Press
If changing cooking times, select the cook time or
end time keys needed to make the changes.
To end keep warm at any time, press CANCEL.
Temperature selection
See the recommended settings chart below for
keep warm. If a particular food is not listed, use the
default temperature of 170°F. If more crispness is
desired, remove the lid or aluminum foil from the
food. Most foods can be kept at serving
temperatures at 170°F. When a combination of
foods are to be kept warm (for example a meat
with 2 vegetables and rolls) use 170°F.
Keep Warm
Recommended Food Settings
2. Press START
Food Item
Heating Level
Hot Beverages
190°F
Fried Foods
190°F
Vegetables
170°F
Soups (Cream) & Stews
170°F
Sauces & Gravies
170°F
Meats
170°F
Eggs
150°F
Dinner Plates with Food
150°F
Casseroles
150°F
Breads/Pastries
150°F
Setting Oven Controls
Slow cook
The slow cook feature is used to cook foods slowly
using lower temperatures. The cooking results will
be much like that of a slow cooker. This feature is
ideal when roasting beef, pork or poultry.
Slow cook may be set with the following options:
• Cook time
• Cook time with end time
The following temperature settings apply to the
slow cook feature:
• High: 275°F/ 134°C use for cooking 4 to 5 hours
• Low: 225°F / 108°C use for cooking 8 to 9 hours
For best results
To set slow cook with low setting:
Example
Step
Press
1. Position oven racks and cookware
in oven. Close the oven door.
2. Press slow cook key. Hi will
appear in the oven display
indicating the default setting is for
high (Figure 1). If a low setting is
needed, press slow cook again to
select the Lo setting (Figure 2) and
release.
3. Press START.
• Completely thaw all frozen foods before cooking.
• When using a single oven rack, place in oven
rack position 2 or 3.
• Position multiple racks to accommodate size of
cooking utensils when cooking multiple food
items.
• Add any cream or cheese sauces during the last
hour of cooking.
• Do not frequently open the oven door or leave
the oven door open when checking food items.
The more heat that is lost, the longer the food
will need to cook.
• Cover foods to keep them moist or use a loose
or vented cover to allow foods to turn crisp or
brown.
• Roasts may be left uncovered so browning can
occur. Cook times will vary depending on the
weight, fat content, bone & the shape of the
roast.
• Preheating the oven is not necessary.
Fig. 1
Fig. 2
To stop slow cook at any time press CANCEL.
To add or change any cook settings after slow
cook has started:
• Press slow cook key. To change the setting,
press the slow cook key again to toggle
between the Hi or Lo setting and release. Press
START to accept change.
• If changing cooking times, select the cook time
or end time keys to make the needed changes.
NOTE
Slow cooking meats may result in the exterior of
meats becoming dark; this is normal.
31
32
Setting Oven Controls
My favorite
The my favorite feature may be used to store and
recall a favorite recipe setting. This feature will only
store or recall one favorite recipe at a time.
To use a saved favorite recipe setting:
Example
My favorite feature may be used with bake, cook
time, conv bake, conv roast and keep warm
cooking features. This feature will not work with any
other feature including end time, broil or self clean.
Step
To save and store my favorite recipe settings
(example shown to bake for 30 minutes with
oven temperature of 325°F):
2. Press START.
Example
Step
Press
1. Press my favorite key. The
favorite icon will appear in the
display (Figure 1).
To erase a favorite recipe setting:
Press
Example
1. Press cook time.
Step
Press
2. Enter 3 0 minutes using numeric
keypads.
Press my favorite and hold until
the favorite icon disappears from
the display (Figure 1).
3. Press START.
4. Press bake.
5. Enter 3 2 5 oven temperature
using numeric keypads.
6. Press START.
7. To store, press and hold my
favorite keypad for 3 seconds.
If at this time you do not wish to start
the oven with the newly stored recipe,
be sure to press CANCEL.
Fig. 1
NOTES
• If you do not wish the oven to automatically
start the recipe when saving my favorite, be
sure to press CANCEL for the last step.
• my favorite feature stores or recalls only one
recipe at any time.
• If a different favorite recipe is needed, you may
record a new recipe over the old. Or, any
previously stored recipe may be erased before
recording a new recipe by following the steps
provided "To erase favorite recipe setting."
Setting Oven Controls
Adjusting the oven
temperature
Your appliance has been factory calibrated and
tested to ensure accurate baking temperatures. For
the first few uses, follow your recipe times and
temperature recommendations carefully. If you think
the oven is cooking too hot or too cool for your
recipe times, the control may be adjusted so the
oven cooks hotter or cooler than the temperature
displayed.
The oven temperature may be increased +35°F
(+19°C) or decreased -35°F (-19°C) from the
factory default settings.
For best results
How to offset the oven temperature by -30°F:
Example
Step
Press
1. Press and hold bake for 6
seconds. Release when
acceptance tone sounds.
"UPO" should show in left side
of display.
2. Enter 3 0 using numeric
keypad (Figure 1).
3. Press bake to toggle to minus
(Figure 2).
Do not use oven thermometers such as those
found in grocery stores to check the temperature
settings inside your oven. These oven
thermometers could vary as much as 20º to 40º
from actual temperatures.
4. To accept change, press
START.
How to offset the oven temperature by +30°F:
Example
Step
1. Press and hold bake for 6
seconds. Release when
acceptance tone sounds. "UPO"
should appear in left side of
display.
2. Enter 3 0 using numeric keypad
(Figure 1).
3. To accept change, press START.
Fig. 1
Fig. 2-
Press
NOTE
Oven temperature adjustments made will not
affect the broil or self-cleaning feature
temperatures.
33
34
Setting Oven Controls
Sabbath mode
(for use on the Jewish Sabbath & Holidays)
For further assistance, guidelines for
proper usage and a complete list of
models with the Sabbath feature,
please vist the web at
http:\\www.star-k.org.
This appliance provides special settings for use
when observing the Jewish Sabbath/Holidays.
Sabbath mode disables all audible tones or visual
display changes on the oven control. BAKE and
cooktop heating are the only cooking features
available while in the Sabbath mode.
You must first set the BAKE feature and
temperature(s) needed for the oven and the COOK
TIME option (if needed) before setting the Sabbath
mode. Any settings made prior to setting the
Sabbath mode will be visible in the displays. The
COOK TIME option, if set prior to the Sabbath
mode, will give one audible alert at the end of
COOK TIME.
The Sabbath mode will override the factory preset
12-hour Energy Saving mode and the appliance will
stay on until the cooking features are cancelled. If
any of the cooking features are cancelled when the
appliance is in the Sabbath mode, no audible or
visual indicators will be available to verify the
cancellation.
If the oven interior lights are needed, be sure to
activate them prior to setting the Sabbath mode.
Once the oven light is turned ON and the Sabbath
mode is active, the oven light will remain on until
the Sabbath mode is turned off and the oven lights
are turned off. The oven door will not activate the
interior oven lights when the oven door is opened or
closed.
It is recommended that any oven temperature
modification made within an active Sabbath mode
be followed with 2 presses of the START key. This
will ensure the oven remains ON even if an attempt
is made to set the oven temperature outside of its
temperature range. If the oven temperature is set
outside of the temperature range, the oven will
default to the nearest available temperature. Try to
set the desired oven temperature again.
To set the oven for the Sabbath feature:
Example
Step
Press
1. Be sure the clock is set with the
correct time of day.
2. Press bake.
3. Enter desired temperature.
325
4. Press START.
5. Enter cook time or end time
settings, if needed. If not needed,
skip this step and continue to step
6. Refer to the cook time or end
time instructions.
6. To enter Sabbath mode, press
and hold both the cook time and
end time keys together for 3
seconds. A beep will sound.
Release the keys.
+
Once properly set in Sabbath mode, SAb will show
in the oven display (Figure 1) until the Sabbath
mode is cancelled.
TIMED CHICKEN NUGGETS
PIZZA DELAY TIMER
DOOR CONVECT BAKE
COOKTOP ROAST BROIL
Fig. 1
IMPORTANT
Remember the oven will shut-off after completing
a cook time or end time and therefore may only
be used once during the Sabbath/Jewish
Holidays. The maximum cooktime setting is
11 hours and 59 minutes.
Setting Oven Controls
Canceling Sabbath mode
To cancel Sabbath mode:
Example
Step
Press
Press and hold both the cook time
and end time keys for 3 seconds. A
beep will sound. Release the keys.
+
All previously-set features in the oven will
automatically cancel once Sabbath mode has
ended.
NOTES
• The only keys available once the range is set
to Sabbath mode are:
• You may change the oven temperature once
baking has started.
1. Press bake.
2. Enter the desired temperature.
3. Press START.
• Remember that the oven control will no
longer beep or display any further changes
once the oven is set for the Sabbath feature.
WARNING
FOOD POISONING HAZARD. Do not let food sit
for more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
What to do after a power failure or power
interruption when Sabbath feature is active:
Should a power failure or interruption occur during
the Sabbath Holidays, the appliance will SHUT
OFF. SF will appear in the control display, indicating
a Sabbath mode failure (Figure 1). Sabbath failure
mode will remain and the oven will not work unitl
Sabbath mode is cancelled (see “To cancel
Sabbath mode” section).
TIMED CHICKEN NUGGETS
PIZZA DELAY TIMER
DOOR CONVECT BAKE
COOKTOP ROAST BROIL
Fig. 1
After Sabbath mode is cancelled, Sabbath mode
settings may be entered again (See “To set the
oven for the Sabbath feature” section).
35
36
Setting Oven Controls
Restoring control to factory
default settings
Your appliance is set with a number of
predetermined oven control settings. Over time, you
may make changes to the original factory settings.
Interior oven light
The interior oven light will automatically turn ON
when the oven door is opened.
Press
keypad to turn the interior oven light ON
The following functions or features have userprogrammable options or adjustments that may
have been changed from the default settings:
and OFF whenever the oven door is closed. The
interior light key will not work during a self-clean
cycle.
• Clock 12-hour or 24-hour display mode.
The interior oven light is located at the upper left
rear wall of the oven interior and is covered with a
glass shield held in place with a wire holder. The
glass shield must be in place whenever the oven is
in use.
• 12-Hour Engergy Savings or continuous bake
mode.
• Tone volume.
• Oven temperature display mode (F° or C°).
• Any oven temperature adjustment made.
• Any saved “my favorite.”
IMPORTANT
Before restoring, please be aware that any
previous changes made to the oven control
settings will be erased once the START keypad
is pressed. This includes any temperature offset
made for the oven when baking.
To restore to factory default settings:
Example
Step
Press
1. Press and hold the number 7 key
for 6 seconds. A beep will sound
and "rST P S" will appear in the
display (Figure 1).
2. Press START to accept.
Fig. 1
To change the interior oven light, see "Changing the
oven light" in the Care & Cleaning section.
Self-Clean
Before starting self-clean
Adhere to the following precautions before
starting a self-clean cycle:
• Remove all items from the oven and cooktop,
including food, cookware, utensils, plastic and
any aluminum foil. Aluminum foil will not
withstand high temperatures generated during
the self-clean cycle.
• Remove all oven racks and accessories from
the oven interior to avoid possible damage. If the
oven racks are not removed they may discolor.
The Luxury Glide™ oven rack must be removed
before starting self-clean to avoid damaging the
glide ability of the rack. “Remove racks” will flash
in the display for several seconds as reminder to
remove the racks before starting a self-clean
cycle (Figure 1).
For best results
Clean any soil from the oven exterior. Clean using
soap and water before starting a self-clean cycle. If
soils are not removed, they may burn on due to the
high temperatures during self-clean.
clean
areas
shown
in
white
do not
clean
Fig. 1
• Be sure the oven vent area is clear.
• Remove all items from the storage drawer.
• Be sure the oven light shield is in place. Turn off
the oven light.
• Remove any excess spills or loose debris.
Spills on the oven bottom should be wiped-up
and removed before starting self-clean. To
clean, use hot, soapy water and a cloth. Large
food spillovers can cause heavy smoke or a fire
during self-clean. Spills that have a high sugar or
acid content (such as milk, tomatoes,
sauerkraut, fruit juices or pie filling) may leave a
dull spot even after self-cleaning.
• Do not clean the oven door gasket (Figure 2).
Do not use any cleaning materials on the oven
door gasket. Doing so may damage the gasket.
The woven material of the oven door gasket is
essential for a good seal. Care should be taken
not to rub, damage or remove the door gasket.
• Do not use commercial oven cleaners or
protective coatings of any kind inside oven.
Residue from oven cleaners may damage the
porcelain during the next self-clean cycle.
Fig. 2
WARNING
• Do not touch the oven during the self-clean
cycle.
• Keep children away from oven during the
self-clean cycle.
• Failure to follow these instructions can result in
burns.
CAUTION
• The health of some birds is extremely
sensitive to the fumes given off during the
self-clean cycle of any range. Move birds to
another well-ventilated room.
• DO NOT line the oven walls, oven racks, oven
bottom or any other part of the range with
aluminum foil. Doing so will stop heat
distribution, produce poor baking results and
may cause permanent damage to the oven
interior. Aluminum foil will melt to a hot oven
surface during self-clean.
37
38
Self-clean
Setting self-clean
A self-cleaning oven automatically cleans itself
using much higher temperatures than those used
for cooking. The self-clean feature eliminates soils
completely or reduces them to a fine powdered ash
that you can later easily wipe away with a damp
cloth.
The self-clean function provides 3 different clean
time settings for self-cleaning. Set clean for 2 hours
for light, 3 hours for normal or 4 hours for heavier
soils.
Once active, the door lock motor will begin locking
the oven door. "door Loc" (Figure 4) will appear in
the display. DO NOT try to open the oven door
when the "door Loc" message is on (allow about
15 seconds for the oven door to completely lock).
DO NOT force the oven door open. This could
damage the door locking system. Once the oven
door is locked the "door Loc" message will turn off
and "CLn" (Figure 5) will remain in the display for
the entire self-clean cycle.
To start self-clean:
Example
Step
Press
1. The oven should be empty and all
oven racks removed. Remove all
items from the cooktop. Be sure the
oven door is completely closed.
2. Press self clean once for a 3-hour
clean time (Figure 1); twice for a 4hour clean time (Figure 2) or 3
times for a 2-hour clean time
(Figure 3).
Fig. 4
Fig. 5
When the self clean cycle has finished:
1. The time of day and "Hot" will show in the
display (Figure 6).
2. Once the oven has cooled (about 1 hour) and
"Hot" is no longer displayed, the "door OPn"
message will appear (Figure 7). When this
message turns OFF the door has finished
unlocking.
3. Press START.
Fig. 6
Fig. 2
Fig. 1
Fig. 3
Fig. 7
3. When the oven is cool, wipe away any residue
or powdered ash from the oven interior using a
damp cloth or paper towel.
NOTES
• A self-clean cycle will not start if the control
lock feature is active.
• When the self-clean feature is active, you may
check the amount of clean time remaining by
pressing the self-clean
keypad once.
• If a self-clean cycle was started but did not
finish due to a power failure, your oven may not
have completely cleaned.
Self-clean
Setting self-clean (cont’d)
Setting delayed self-clean
To cancel self-clean:
You may wish to set your appliance to perform a
self-clean cycle later (up to 12 hours later). The end
time key will determine when the cleaning will stop.
1. Press thecancel
key.
2. If the self-clean cycle has heated the oven to a
high temperature, "Hot" (Figure 1) will show in
the display. Allow enough time for the oven to
cool and for the "door OPn" message to
display (Figure 2). When this message turns
OFF the oven door may be opened.
You will need to set the end time far enough to
allow for the type of clean cycle you choose,
whether for 2, 3, or 4 hours. Remember to add
30 to 40 additional minutes of cooling time before
using the oven for cooking.
Setting for a heavy (4 hour) self-clean cycle to
end at 8:00 o’clock:
Example
Fig. 1
Fig. 2
Starting self-clean after cancelling:
If a self-clean cycle was cancelled using the
cancel key before the oven was finished cleaning,
you may wish to set for another self-clean cycle.
If self-clean was cancelled shortly after being
started, and the oven interior did not reach high
self-clean temperatures, the next clean cycle may
be set as soon as the oven door unlocks from the
cancelled clean cycle.
If the oven became hot enough from the cancelled
self-clean cycle, you may be required to wait up to 4
hours before the control will allow another selfclean cycle to start.
Restarting a self-clean cycle after a power
outage:
If the self-clean cycle was interrupted by a power
failure, your oven may not be thoroughly cleaned.
Another self-clean cycle may be needed. Once
power is restored, the oven has cooled and the
oven door has unlocked, set to clean for another
cycle.
Step
Press
1. Be sure the clock is set with the
correct time of day. Remove all
oven racks. Remove all items
from the cooktop. Be sure the
oven door is completely closed.
2. Press end time.
3. Enter 8 0 0 using the numeric
keypad.
4. Press START.
5. Press self clean.
6. Press self clean again.
7. Press START.
Press CANCEL at any time to stop self-clean.
Setting repeated self-clean cycles
If attempting to set repeating self-clean cycles, the
control may display the messages "CLEAn"” then
"dELAy" followed by the length of time before the
next self-clean may be set.
For example, if the message displayed reads
"4:00", and the time is 12:00 o’clock, the control will
not allow self-clean to be set again until after 4:00
o’clock.
CAUTION
To avoid possible burns use caution when
opening the oven door after the self-clean cycle is
finished. The oven may still be VERY HOT.
Stand to the side of the oven when opening the
door to allow hot air or steam to escape.
39
40
Care and Cleaning
Cleaning Recommendations
Surface
Type Cleaning Recommendation
• Control knobs
(some models)
• Painted body parts
• Painted decorative trim
• Aluminum, plastic or
vinyl trim
For general cleaning, use hot, soapy water and a cloth. For more difficult
soils and built-up grease, apply a liquid detergent directly onto soil. Leave
on soil for 30-60 minutes. Rinse with a damp cloth and dry. Do not use
abrasive cleaners these surfaces; they can scratch. To remove control
knobs, turn to OFF position; grasp firmly and pull straight off the shaft. To
replace knobs after cleaning, line up the flat sides of both knob and shaft;
then push knob into place.
• Control panel
• Control key pad
membrane
• Decorative trim (some
models)
Before cleaning the control panel, turn all controls off, activate control
lock (some models) and if needed remove knobs from panel (some
models). Do not use abrasive cleaners on controls or trim; they can
scratch. Clean using hot, soapy water and a dishcloth. Be sure to
squeeze excess water from dishcloth before wiping control panel;
especially when wiping around the controls area. Excess water in or
around the controls may cause damage to the appliance. When rinsing,
use clean water and a dishcloth and be sure to squeeze excess water
from dishcloth before wiping the control panel.
• Stainless Steel
(some models)
Clean stainless with warm soapy water using a clean sponge or cloth.
Rinse with clean water and dry with soft clean cloth. Do not use harsh
scrubbing cleaners. Only use kitchen cleaners especially made for cleaning
stainless steel. Always be sure to rinse cleaners from the surface as bluish
stains may occur during heating that cannot be removed.
• Porcelain enamel
parts
• Broiler pan and broiler
pan insert
Gentle scrubbing with a soapy no-scratch cleaning pad will remove most
spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary,
cover difficult spots with an ammonia-soaked paper towel for 30 to 40
mins. Rinse with clean water and a damp cloth, and then scrub with a
soap-filled no-scratch cleaning pad. Rinse and wipe dry with a clean cloth.
Example
Do not allow food spills with high sugar or acid content (milk, tomatoes,
sauerkraut, fruit juices or pie filling) to remain on surfaces; they may
cause a dull spot even after cleaning.
• Oven interior
Remove excessive spillovers from oven cavity bottom before starting
self-clean. Clean any soils from oven frame and door liner outside the
oven door gasket. For important preparation information be sure to read
all the instructions in the self-cleaning section.
• Oven racks
Do not clean oven racks in oven during the self-clean cycle. Remove
and clean using a mild, abrasive cleaner following manufacturer's
instructions. Thoroughly rinse and dry.
• Oven door
Use soap & water to thoroughly clean the top, sides and front of the oven
door. Rinse well. You may use a glass cleaner on the outside glass of the
oven door. Do not immerse the door in water. Do not spray or allow
water or glass cleaner to enter the door vents. To avoid scratches, do
not use oven cleaners, cleaning powders or any harsh abrasive cleaning
materials on the outside of the oven door. Do not clean the oven door
gasket. On self-cleaning models the oven door gasket is made of a woven
material which is essential for a good seal. Care should be taken not to
rub, damage or remove this gasket.
• Burner heads, caps,
grates & cooktop
See “Cleaning cooktop and parts” in the Care and Cleaning section.
Care and Cleaning
Cleaning cooktop and parts
CAUTION
• Do not remove any parts from the cooktop until
they have completely cooled and are safe to
handle. DO NOT attempt to clean the cooktop
whenever the cooktop or burner heads are still
hot.
• To avoid possible burns DO NOT attempt to
operate the surface burners without the burner
caps.
• Any additions, changes or conversions required
in order for this appliance to satisfactorily meet
the application needs must be made by an
authorized qualified Agency.
Burner grates
The burner grates are dishwasher safe and may be
cleaned in the dishwasher. Remove any excessive
soils before placing in the dishwasher.
Burner caps
To remove the burner caps for cleaning, lift the
burner cap off the burner head. Clean heavy soils
with an absorbent cloth. Rinse with a clean, damp
cloth and thoroughly dry the bottom and inside of
the cap. Do not use harsh abrasive cleaners; they
can scratch the porcelain on the cap. Do not clean
burner caps in dishwasher. Refer to “Before setting
surface burners” in the “Surface Cooking” Section.
Burner heads
IMPORTANT
• Do not use spray oven cleaners on the
cooktop.
• Before placing burner grates onto cooktop,
turn grates over to identify rear of grate and
place all the grates to the rear of the cooktop.
• For proper gas flow and ignition of the burners,
DO NOT allow spills, food, cleaning agents
or any other material to enter the gas
orifice opening.
• The cooktop is not removable. Do not
attempt to remove or lift the cooktop.
• When placing the burner caps on the cooktop,
be sure the burner caps are seated firmly on
top of burner heads. Refer to “Before setting
surface burners” in the “Surface Cooking”
Section.
The cooktop is designed to make cleaning easier.
The gas burners are sealed so cleanup is easy
when spillovers are cleaned immediately.
Cooktop
If a spill occurs on the recessed or contoured
areas, blot with an absorbent cloth. Rinse with a
clean, damp cloth and wipe dry. Do not use harsh
abrasive cleaners on the cooktop. They can
scratch the porcelain. Completely rinse any
cleaners used on the porcelain cooktop may
become damaged during future heating.
Lift the burner cap from the burner head. The
surface burner heads are secured to the cooktop
and must be cleaned in place.
For proper gas flow it may be necessary to clean
the burner heads and slots. To clean, first use a
clean DAMP cloth to soak up any spills. Remove
any food from between the burner slots using a
small nonabrasive brush like a toothbrush.
Afterwards wipe using a damp cloth. For stubborn
soils located in the slots, use a small-gauge wire or
needle to clean.
Should you experience ignition problems it may be
that an ignition port hole is partially blocked with soil.
(See Figure 1) . With the burner head in place, use
a small wire gauge needle or the end of a paper clip
to clear the ignition port or ports.
slots
ignition port
orifice port
Fig. 1 - Cooktop burner head
41
42
Care and Cleaning
Aluminum foil and oven liners
Do not use oven bottom liners or use aluminum
foil to cover the oven racks.
CAUTION
Protective liners—Do not use aluminum foil to
line the oven bottom, except as suggested in the
manual. Improper installation of these liners may
result in a risk of electrical shock, or fire.
Using a liner in
the oven
restricts the
heat and air
flow needed to
obtain the best
possible
cooking results
for any oven.
Changing the oven light
CAUTION
Be sure the range is unplugged and all parts are
COOL before replacing oven light. Wear a
leather glove for protection against possible
broken glass or burns.
The oven lights are located at the rear of the oven
cavity and are covered with a glass shield held by a
wire holder (Figure 1). The glass shield protects the
light bulb and must be in place whenever the oven
is in use.
glass
shield
wire
holder
During self-clean the oven temperature can
become hot enough to melt aluminum cooking
utensils or aluminum foil if left in the oven. This
could result in permanent damage to the oven
interior and porcelain finish.
Fig. 1
To replace interior oven light bulb:
1. Turn electrical power off at the main source or
unplug the range.
2. Press wire holder to one side to release the
glass shield that covers the light bulb.
3. Replace light with a new 40 watt appliance
bulb.
4. Replace glass shield over bulb and snap wire
holder back into place.
5. Turn power on at main source (or plug the
appliance in).
6. The clock will then need to be reset. To reset,
see Setting clock in this Use & Care Guide.
Care and Cleaning
Removing the oven door
CAUTION
To prevent possible burns, do not attempt to
remove the oven door until the oven has
completely cooled.
K
LOC
IMPORTANT
The oven door is heavy. Be careful when
removing and lifting the door. Do not lift the
oven door by the handle.
Fig. 2
1. Open oven door completely (Figure 1).
2. Pull the hinge locks on both left and right
hinges down from the oven frame completely
towards the oven door (Figure 2). A tool such
as a small flat-blade screwdriver may be
required.
about
10°
oven
door
3. Firmly grasp both sides of oven door along the
door sides (Do not use the oven door handle).
4. Close the door to the broil stop position. The
oven door will stop into this position just before
fully closing.
hinge
5. With the oven door in the broil stop position
(Figure 3), lift and carefully pull the oven door
away from the oven frame. To avoid finish
damage, be careful not to allow the oven door
hinges to contact the oven front frame.
Fig. 3
roller
pin
hinge
arm
Fig. 4
Fig. 1
43
44
Care and Cleaning
Replacing the oven door
To replace oven door:
1. Firmly grasp both sides of oven door along the
door sides (Do not use the oven door handle).
about
10°
2. Holding the oven door at the same angle as the
removal position (See “Removing the oven
door” section), carefully line up and insert both
door hinge arms between the pins located on
each side of the oven door frame (Figure 1).
oven
door
hinge
3. With both door hinge arms in place, open the
oven door (Figure 2).
4. Push the door hinge locks up towards and into
the oven frame for both left and right oven door
hinges to the locked position (Figure 3).
Fig. 1
5. Close the oven door.
Fig. 2
K
LOC
Fig. 3
Care and Cleaning
Special door care instructions
IMPORTANT
Most oven doors contain glass that can
break. Read the following recommendations:
• Do not close the oven door until all the interior
oven racks are fully inserted and retracted to the
back of the oven.
• Do not hit the glass with pots, pans, or any other
object. The oven door glass may break or even
break at a later time unexpectedly.
• Scratching, hitting, jarring or stressing the oven
door glass may weaken its structure causing an
increased risk of breakage at a later time.
• You may use a glass cleaner on the outside of
the oven door glass. Do not spray or allow
water or the cleaner to enter or drip down into
the oven door vents. Spray cleaner on cloth first
and then wipe the oven door clean.
• Do not use strong oven cleaners, powders or
any harsh abrasive cleaning materials on the
outside of the oven door or glass.
• Never clean the oven door gasket.
45
46
Solutions to Common Problems
Before you call for service, review the following list. It may save you time & expense. The list includes
common occurrences that are not the result of defective workmanship or materials in this appliance.
Before you call
Problem
Solution
Appliance is not level
• Be sure floor is level, strong & stable enough to
adequately support range.
• If floor is sagging or sloping, contact a carpenter to
correct the situation.
• Poor installation. Place oven rack in center of oven.
Place a level on the oven rack. Adjust leveling legs at
base of appliance until the oven rack is level.
• Kitchen cabinet alignment may make range appear not
level. Be sure cabinets are square & have sufficient
room for appliance clearance.
Cannot move appliance easily.
Appliance must be accessible for
service
Entire appliance does not operate
• Cabinets not square or are built in too tightly. Contact
builder or installer to make appliance accessible.
• Carpet interferes with appliance. Provide sufficient
space so appliance can be lifted over carpet.
• The time of day is not set. The time of day must first be
set in order to operate the oven. See “Setting clock ” in
the Setting Oven Controls section.
• Make sure cord/plug is plugged correctly into outlet.
• Service wiring is not complete. Contact your dealer,
installing agent or authorized service agent.
• Electrical power outage. Check house lights to be sure.
Call your local electric company for service.
Oven does not operate
• Be sure the oven controls are set properly for the
desired cooking feature. See Setting Oven Controls in
this Use & Care Guide or read the instructions “Entire
appliance does not operate” in this checklist.
Oven light does not work
• Replace or tighten bulb. See “Changing oven light”
section in this Use & Care Guide.
Oven control panel beeps & displays
any F code error (for example F10)
• Oven control has detected a fault or error condition.
Press CANCEL to clear the display & stop beeping. Try
the bake or broil feature again. If the F code error
repeats, remove power supply to appliance, wait 5
minutes and then repower the appliance and set clock for
the time of day. Try the bake or broil feature again. If the
fault recurs, record fault and call for service.
Questions or for service call: 1-877-4ELECTROLUX (1-877-435-3287)
Solutions to Common Problems
Before you call
Problem
Solution
Oven smokes excessively during
broiling
• Control not set properly. Follow broiling instructions
under Setting Oven Controls.
• Make sure oven door is opened to broil stop position.
• Meat too close to the broil element. Reposition the broil
rack to provide proper clearance between the meat &
the element. Preheat the broil element for searing.
• Meat not properly prepared. Remove excess fat from
meat. Cut remaining fatty edges to prevent curling, but
do not cut into lean.
• Insert on broiler pan wrong side up & grease not
draining. Always place grid on the broiler pan with ribs
up & slots down to allow grease to drip into pan (some
models).
• Grease has built up on oven surfaces. Regular cleaning
is necessary when broiling frequently. Old grease or
food spatters cause excessive smoking.
Flames inside oven or
smoking from oven vent
Poor baking results
• Excessive spillovers in oven. For example this will
happen for pie spillovers or large amounts of grease
left on the oven bottom. Wipe up excessive spillovers
before starting oven. If flames or excessive smoke are
present see “About broiling” in the Setting Oven
Controls section.
• Many factors affect baking results. Make sure the proper
oven rack position is used. Center food in the oven and
space pans to allow air to circulate. Allow the oven to
preheat to the set temperature before placing food in the
oven. Try adjusting the recipe's recommended
temperature or baking time. If you feel the oven is too hot
or cool, see “Adjusting Oven Temperature” in the Setting
Oven Controls section of this Use & Care Guide.
Questions or for service call: 1-877-4ELECTROLUX (1-877-435-3287)
47
48
Solutions to Common Problems
Before you Call
Problem
Solution
Surface burners do not light
• Surface control knob has not been completely turned
to
(lite). Push in and turn the surface control knob to
lite until burner ignites and then turn control knob to
desired flame size.
• Burner ports are clogged. With the burners OFF, use a
small-gauge wire or needle to clean ports. See
“Cleaning cooktop and parts” in the Care and Cleaning
section for complete instructions.
• Appliance power cord is disconnected from outlet. Be
sure power cord is securely plugged into the electrical
outlet.
• Electrical power outage.
Surface burner flame is orange.
• Dust particles in main line. Allow the burner to operate a
few minutes until flame turns blue
• In coastal areas, a slightly orange flame is unavoidable
due to salt air.
Surface burner flame burns half way
around.
• Burner ports are clogged. With the burner OFF, clean
ports by using a small-gauge wire or needle.
• Moisture is present after cleaning. Lightly fan the flame
and allow burner to operate until flame is full. Dry the
burners thoroughly and follow instructions under
“Cleaning cooktop and parts” in the Care and Cleaning
section.
Questions or for service call: 1-877-4ELECTROLUX (1-877-435-3287)
Notes
49
50
Notes
Major Appliance Warranty Information
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will
repair or replace any parts of this appliance that prove to be defective in materials or workmanship when such appliance
is installed, used, and maintained in accordance with the provided instructions. In addition, the glass cooktop or radiant
surface element of your appliance (excluding built-in and free-standing range appliances) is covered by a two through five
year limited warranty. During the 2nd through 5th years from your original date of purchase, Electrolux will provide a
replacement glass cooktop or radiant surface element for your appliance which has proven to be defective in materials or
workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
Exclusions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
This warranty does not cover the following:
Products with original serial numbers that have been removed, altered or cannot be readily determined.
Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
Rust on the interior or exterior of the unit.
Products purchased “as-is” are not covered by this warranty.
Products used in a commercial setting.
Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in
ordinary household use or used other than in accordance with the provided instructions.
Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc.,
which are not a part of the appliance when it is shipped from the factory.
Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs,
handles, or other cosmetic parts.
Labor or in-home service costs during the additional limited warranty periods beyond the first year from your
original date of purchase.
Pickup and delivery costs; your appliance is designed to be repaired in the home.
Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
Damages to the finish of appliance or home incurred during transportation or installation, including but not
limited to floors, cabinets, walls, etc.
Damages caused by: services performed by unauthorized service companies; use of parts other than genuine
Electrolux parts or parts obtained from persons other than authorized service companies; or external causes
such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME
STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service
be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty
must be obtained by contacting Electrolux at the addresses or phone numbers below.
This warranty only applies in the USA, Puerto Rico and Canada. In the USA and Puerto Rico, your appliance is warranted
by Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is
warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this
warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service
company. Product features or specifications as described or illustrated are subject to change without notice.
USA
1-877-435-3287
Electrolux Major Appliances North America
10200 David Taylor Drive
Charlotte, NC 28262
Canada
1-800-265-8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada L5V 3E4
51
www.electrolux-store.com