Electrolux U30428 EUFG29800 User's Manual

Instruction book
Freezer
EUFG29800
We were thinking of you
when we made this product
8184107-00/4
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer
a wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind. Good luck!
3
The following symbols are used in this manual:
Important information concerning your personal safety and
information on how to avoid damaging the appliance
General information and tips
Environmental information
Scrapping old appliances
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the
shop where you purchased the product.
4
Contents
Scrapping old appliances . . . . . . . . . 4
Safety instructions . . . . . . . . . 6
USE . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Control Panel . . . . . . . . . . . . . . . . . . . 7
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . 8
Functions Menu . . . . . . . . . . . . . . . . . 8
Select /Switch off /Switch on . . . . . . 9
Temperature selection . . . . . . . . . . . . 9
Switching off . . . . . . . . . . . . . . . . . . . . 9
Ambient Temperature Function . . . . . 9
Child lock Function . . . . . . . . . . . . . . 9
Eco mode Function . . . . . . . . . . . . . . 9
Freezing fresh food . . . . . . . . . . . . . . 10
Chill Mode Function . . . . . . . . . . . . . 10
Use of the freezer compartment . . . 10
Storage of frozen food . . . . . . . . . . . 11
Excessive temperature alarm . . . . . 11
Door open acoustic alarm . . . . . . . . 12
Control Panel (ice dispenser) . . . . . 12
Cabinet interior . . . . . . . . . . . . . . . . . 13
HINT and TIPS . . . . . . . . . . . . . . . .
Saving energy . . . . . . . . . . . . . . . . .
Food Storage . . . . . . . . . . . . . . . . .
Protect the environment . . . . . . . .
5
14
14
14
15
MAINTENANCE and
CLEANING . . . . . . . . . . . . . . . . . . . . 15
Removing the ventilation grille . . . . 15
Cleaning . . . . . . . . . . . . . . . . . . . . . . 16
Servicing and cleaning the ice
dispense . . . . . . . . . . . . . . . . . . . 16
To change the liamp . . . . . . . . . . . . . 16
When the appliance is not in use . . 16
SOMETHING NOT
WORKING . . . . . . . . . . . . . . . . . . . . . 16
TECNICAL SPICIFICATION . . . . . . . 19
Permissible water pressure (to ensure
reliable function). . . . . . . . . . . . . 19
INSTALLATION . . . . . . . . . . . . . . . . . 20
Unpacking . . . . . . . . . . . . . . . . . . . . . 20
Remove the transport supports . . . 20
Cleaning . . . . . . . . . . . . . . . . . . . . . . 20
Connecting the water hose . . . . . . . 20
When the water system is started for
the first time . . . . . . . . . . . . . . . . 21
Electrical cord . . . . . . . . . . . . . . . . . . 21
Installing the cabinet . . . . . . . . . . . . 21
Door Reversal . . . . . . . . . . . . . . . . . . 22
Electrical connection . . . . . . . . . . . . 22
Guarantee/Customer Service . . . . . 25
EUROPEAN GUARANTEE . . . . . . . 27
www.electrolux.com . . . . . . . . . . . . 28
SAFETY INSTRUCTIONS
Your new freezer may have other
functions compared to your previous
one.
Carefully read these instructions to
learn how the appliance works and
how to care for it. Keep the instruction
booklet. It will come in handy if you
later sell the cabinet or give it to
somebody else.
These warnings are provided in the
interests of your safety. Ensure that
you understand them all before
installing or using the appliance. Your
safety is of paramount importance. If
you are unsure about any of the
meanings or warnings contact the
Customer Care Department.
For the User
· The cabinet is intended for keeping
foodstuff in a normal household as
explained in this instruction booklet.
· Do not keep explosive gases or
liquids in the refrigerator or freezer
compartment. They may explode and
cause injury and material damage.
· Do not place food products directly
against the air hole on the rear wall.
· Do not keep carbonised drinks or
bottles in the freezer compartment.
The glass bottles may break.
· The cabinet is heavy. The edges
and projecting parts of the cabinet
may be sharp. Be careful when moving
the cabinet and always use gloves.
do not gain access to the operating
controls or the inside of the cabinet.
WARNING
Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING
Do not use mechanical devices or
other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
WARNING
Do not damage the refrigerant circuit.
WARNING
Do not use electrical appliance inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
Child Safety
· Pay attention so that small children
6
USE
BEFORE USE
Position and clean the cabinet as
explained in the section "Installation".
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 2 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
Control Panel
A B
A - Appliance button ON/OFF
B - Temperature regulation button
C - Temperature and function indicator
D - Function button
E - Confirmation button
Used to switch the ice machine on
and off. See "Switching the ice
machine on and off".
7
C
D E
DISPLAY
Flashes when ice machine
switched on and off.
Excessive temperature alarm and
Door open acoustic alarm
Indicator (if foreseen)
If on the temperature indicated is
the ambient temperature
Temperature indicator
If on the Child Lock function is on
If on the timer function is on
If on the Chill mode function is on
Positive Temperature indicator
If on the Action Freeze function
is on
Negative Temperature indicator
If on the Eco Mode function is on
First switch on
After plugging the plug into the power
outlet, if the display is not illuminated,
press key (A), appliance on.
As soon as the appliance is turned on,
it is in alarm condition, the temperature
flashes and you will hear a buzzer.
Press key (E) and the buzzer will go off
(also see the section on "excessive
temperature alarm") the icon
still
flashes and on the indicator
will
appear the warmest temperature
reached.
For a correct storage of the food select
the Eco mode function that guarantee
the following temperature is set:
-18°C in the freezer
· Wait until the inside compartment
temperature reach -18°C, before introducing the goods in the freezer compartment.
· To select a different temperature
see "Temperature regulation".
Functions Menu
By activating the key D the functions
menu is operating. Each function
could be confirmed by pressing button
E. If there is no confirmation after
some seconds the display will go out
from the menu and return in normal
condition.
The following functions are indicated:
Ambient Temperature
Child Lock function
Eco Mode function
Action Freeze function
Drinks Chill function
8
Select /Switch off /Switch on
Temperature regulation
The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key B the current temperature setting flashes on the indicator and by pressing the key B again it
is possible to change it.
You confirm the choice of the temperature either by pressing the key E,
(you will hear the buzzer) or by waiting
for some seconds (you will not hear
the buzzer).
Then the indicator shows the inside
compartment temperature.
The newly selected-temperature must
be reached after 24 hours.
It is not necessary to set the temperature again after long periods of non
use as the temperature remains
stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting temperature. During this time it is possible
that the temperature displayed is
different than the setting temperature.
Switching off
The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.
Ambient Temperature Function
The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corres.
ponding icon appears
9
In this condition the selected temperature is the ambient temperature.
You must confirm the choice by
pressing key E within a few seconds.
You will hear the buzzer and the icon
will remain lit.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.
Child Lock Function
The Child Lock function is activated by
pressing key D (several times if necessary) until the corresponding icon
.
appears
You must confirm the choice by pressing key E within a few seconds. You
will hear the buzzer and the icon will
remain lit.
In this condition any possible operation
through the keys does not cause any
change as long as this function is
activated.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon flashes and then
key E.
Eco mode Function
The Eco Mode function is activated by
pressing key D (several times if necessary) until the corresponding icon
(or setting the temperature
appears
at -18°C).
You must confirm the choice by pressing key E within a few seconds. You
will hear the buzzer and the icon will
remain lit.
In this condition the chosen temperatures are automatically set ( - 18°C), in
the best conditions for storing food.
It is possible to de-activate the function
at any time by changing the selected
temperature in one of the compartments.
corresponding icon flashes and then
key E.
Freezing fresh food
The Drinks Chill function is to be used
as a safety warning when placing
bottles in the freezer compartment. It is
activated by pressing key D (several
times if necessary) until the correspon-
The freezer compartment is suitable for
long term storage of commercially
frozen and deep-frozen food, and for
freezing fresh food.
The maximum quantity of foods to
freeze in 24 hours is shown on the
serial number plate.
To freeze the amount of food indicated
on the serial number plate, place the
food directly in touch with the cooling
surface (remove the drawer or basket).
In case the food is frozen inside the
drawers or baskets, the maximum
quantity is slightly reduced.
To freeze fresh foods, you will need to
activate the Action Freeze function.
Press key D (several times if necessary)
until the corresponding icon appears
.
You must confirm the choice by pressing key E within a few seconds. You
will hear the buzzer and on the display
will appear some animation with lines.
After a pre-cooling period of 24 hours,
place the foods in the freezer.
Place the food to be frozen in the
compartment, as this is the coldest
point.
The freezing process takes 24 hours.
During this period do not put other
foods in the freezer.
This function stops automatically after
52 hours.
It is possible to de-activate the function
at any time by pressing key D until the
Chill Mode Function
.
ding icon appears
You must confirm the choice by pressing key E within a few seconds.You
will hear the buzzer and the icon
remain lit.
In this condition it operates a timer
with a default value of 30 min and it
could change from 1 to 90 min, by
pressing key B you select the minutes
needed.
At the end of the selected time there
are the following indications:
the symbol
- on the indicator
flashing
;
flashing ;
- the icon
- the icon
flashing ;
- sounding of an acoustic alarm until
key E is pressed. At this point bare in
mind to remove the drinks contained in
the freezer compartment.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.
Use of the freezer compartment
The freezer is provided with the symbol
which means that it is
suitable for freezing fresh food and for
long term storage of frozen and
deep-frozen food.
10
The temperature may be regulated
between -15°C and -24°C.
We suggest setting the internal temperature of approximately -18°C,
which guarantees proper freezing and
conservation of the frozen foods.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting temperature. During this time it is possible
that the temperature displayed is
different than the setting temperature.
Attention!
Difference between the temperature
displayed and temperature setting is
normal. Especially when:
- a new setting has recently been
selected
- the door has been left open for a
long time
- warm food has been placed in the
compartment.
Difference until 5°C inside the
compartment are quite normal.
During normal functioning the indicator
shows the warmest temperature inside
the compartment.
Storage of frozen food
When first starting-up or after a period
out of use, before putting the products
in the compartment let the appliance
run at least 12 hours. To obtain the
best performance from this appliance,
you should: if large quantities of food
are to be stored, remove all drawers
and baskets from appliance and place
food on cooling shelves.
Pay careful attention not to exceed the
11
load limit stated on the side of the
(where applicable).
upper section
Important
In the event of accidental defrosting,
for example due to a power failure, if
the power has been off for longer that
the value shown in the technical
characteristics chart under "rising
time", the defrosted food must be
consumed quickly or cooked
immediately and then refrozen (after
cooling).
Excessive temperature alarm
An increase in the temperature in the
freezer compartment (for example due
to a power failure) is indicated by:
- flashing temperature;
;
- flashing of the icon
- sounding of buzzer.
When normal conditions are restored:
- the acoustic signal shuts off;
- the temperature value continues to
flash;
When you press key "E" to de-activate
the alarm, the highest temperature
reached in the compartment appears
on indicator for some seconds. Then it
returns on the normal operation
showing the temperature of the
selected compartment.
During the alarm phase, the buzzer
can be switched off by pressing key E.
Door open acoustic alarm
An acoustic alarm will sound when the
door is left open for around 1,5 minutes.
The door open alarm conditions are
indicated by:
- flashing of the icon
;
- sounding of buzzer.
Press the key (E) to stop the acoustic
alarm.
When normal conditions are restored
(door closed):
- the acoustic alarm will stop.
Control Panel (ice dispenser)
F
G
K
F. Yellow indicator lamp
Lights up when the locking function
has been activated.
G. Button for locking function.
Used for temporary disconnection of
the locking function and alarm
re-setting.
H. Button for night setting/lighting.
Used for activation/deactivation of the
night setting function and to switch the
lighting and the alarm setting on and
off.
I. Lighting
J. Photo-electric sensor.
Senses prevailing lighting conditions
(must not be covered).
K. Ice feeder
Activated when the paddle in the
feeder is fully depressed.
HI J
Switching the ice machine on and off.
The ice machine is switched on in the
production plant and starts up automatically when the refrigerator is connected to water and power supplies.
To switch off or on the ice machine,
press in the button (D) (several times if
necessary) until the corresponding icon
. You must confirm the
appears
choice by pressing key E within a few
seconds. If the ice machine is
switched off, then the cover supplied
should be fitted over the ice delivery
hole in the door.
Locking function - The ice dispenser
control panel.
The locking function is activated in the
production plant.
12
For temporary unlocking:
Keep the button (G) pressed in for
about three seconds until the yellow
indicator lamp (H) goes out. The
locking function is re-activated automatically after about three seconds.
For permanent unlocking:
Keep the buttons (G) and (H) pressed
in at the same time for about three
seconds. The button (G) or (H) lights
up to indicate unlocking.
To activate the locking function:
Keep the buttons (G) and (H) pressed
in at the same time for about three
seconds. Activation is indicated by the
yellow indicator lamp (F) lighting up.
Lighting.
The ice dispenser lighting (I) goes on
automatically when ice is delivered.
For permanent lighting:
1. Ensure that the ice dispenser is
unlocked.
2. Keep the button (H) pressed in for
three seconds and the lighting will go
on. The lighting stays on with 50 % of
its full intensity.
To switch off the lighting:
Keep the button (H) pressed in for
about three seconds until the lighting
goes out.
Delivery of ice.
The delivery of ice starts when the
paddle (K) is fully depressed and
continues until the paddle is released.
Stop delivery by removing the
container from the paddle.
The night setting.
This function switches off the noiseproducing parts of the ice machine
during the night.
13
To activate the night setting.
Press and release the button (H),
which then lights up.
Disengaging the night setting.
Press and release the button (H) and
the light goes out.
Advice and recommendations:
If increased ice-production capacity is
desired, it is advantageous to press
the freeze button in the top panel. This
function disengages automatically.
Cabinet interior
Freezer drawers
The freezer drawers ensure that it is
quick and easy to find the food
package you want. In order to obtain
maximum space, all fittings except the
top door and the lower box can be
removed and filled with groceries up to
the indicated loading limit.
Removable shelves
There are the removable shelves inside
the freezer. Remove the shelf when
large food products need to be frozen.
Shelf for ice machine.
Cannot be removed.
Ice container.
Can be removed. Lift the front edge
and then pull out. When the ice
container is pulled out, this stops all
the functions of the ice machine.
When re-fitting (if necessary), the ice
container feed screw should be
positioned against the rear flange.
HINT and TIPS
Saving energy
· Pay careful attention to where the
cabinet is placed. See the section
"Installation". When installed correctly,
the cabinet will consume less energy.
· Try to avoid keeping the door open
for long periods, or opening the door
too frequently as warm air will enter the
cabinet, and cause the compressor to
often switch on unnecessarily.
· Ensure there are no obstructions
preventing the door from closing
properly.
· Thaw frozen food in the fridge. This
will ensure safer defrosting of foods
and reduce the work of the
refrigeration unit
· It is advisable to periodically clean the
refrigeration system at the back of the
appliance with a duster or vacuum
cleaner.
· Food which is to be frozen (when
cool) should be placed in the fridge
before being transfered to the freezer.
· Avoid unnecessary frosting in the
cabinet by packing all foodstuffs into
airtight packages before placing them
in the freezer.
· Carefully follow the advice on freezing
products in the section "Using the
freezer". This will prevent wasting
energy.
· Do not set the temperature too low in
the freezer. A suitable temperature is in
the range of -18°C to -20°C .
· Make sure the door gasket is
complete and always clean.
Food Storage
· To obtain the best results from your
appliance, neither hot foods nor liquids
which may evaporate, should be
placed in the larder compartment.
· Avoid buying frozen food if you can
not store it straight away. The use of
an insulated container is advisable.
When you arrive home place the
frozen food in the freezer immediately.
· Ensure that food placed in the freezer
is dated and labelled and used in date
order to ensure that food is consumed
at its best. Remove suspect food from
you refrigerator and clean, refer to
cleaning and maintenance.
14
Protect the environment
· Hand over the cabinet packaging
and discarded fridges and freezers to a
recycling station. Contact your local
council or Environmental Health office
for more information.
· Keep foodstuff in re-usable
containers. Cut down on disposable
material as much as possible.
· When cleaning the cabinet, use a
mild washing-up detergent.
· Follow the advice in the section
"Saving energy"
· The door gasket and coolant used in
this cabinet will not harm the ozone
layer.
· All parts in the packaging can be
recycled.
· The cabinet has been designed for
easy dismantling and subsequent
recycling.
MAINTENANCE and
CLEANING
Removing the ventilation grille
The ventilation grille can be removed,
e.g. to wash the grille.
Make sure the door is open when
removing the ventilation grille. Unsnap
the upper edge of the grille by pulling
outward/downward. Then pull the grille
straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
15
Internal Cleaning
Disconnect the appliance from
electricity supply.
Clean the inside and accessories with
warm water and bicarbonate of soda
(5ml to 0,5 litre water) Rinse and dry
thoroughly.
Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
External Cleaning
Use water/neutral soap emulsion for
cleaning the surface of stainless steel,
anti-finger-print coated. Do NOT use
abrasive paste.
Wash the outer cabinet with warm
soapy water. Remove the ventilation
grille (see the section "Removing the
ventilation grille") and vacuum-clean
under the cabinet. Once or twice a
year dust the condenser (black grille)
and the compressor at the back of the
appliance, with a brush or vacuum
cleaner, as an accumulation of dust
will affect the performance of the
appliance and cause excessive
electricity consumption.
When moving the cabinet, lift it by the
front edge to avoid scratching the floor.
Servicing and cleaning the ice
dispenser
When necessary, clean the surfaces of
the dispenser and the ice container
that are accessible from the outside,
using only a soft cloth and warm water.
Never use cleaning agents with a
grinding or aggressive effect.
When necessary, the feeder and the
ice container can be cleaned after
removal of the surfaces accessible
from the outside, using only a soft
cloth and warm water.
Ensure that the ice container is
thoroughly dry before being re-fitted.
If the system is not to be used for a
long period, it is advisable to switch off
the ice machine and water supply,
empty the ice container and fit the
cover supplied over the delivery hole
for ice in the door. When re-starting,
avoid using the ice produced during
the first day.
To change the lamp
The light is switched on automatically
when the door is opened. Before
replacing the light bulb, disconnect the
power plug from the outlet.
Disassemble the lamp by using a
screwdriver in the recess on the lamp
insert.
Assemble a new lamp by guiding it
into a centred position and press until
it snaps.
Use a halogen bulb of the same type,
maximum rating of 20 W.
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is
defrosted automatically.
When the appliance is not in use
Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
SOMETHING NOT WORKING
Before contacting your local Service Force Centre check the following point:
Problem
" " is displayed in the
temperature display.
Possible cause / Remedy
Please contact your local Electrolux Service
Force Centre
16
Audible alarm + flashing red
warning lamp. (It is too warm
inside the freezer.)
Switch off the audible alarm by pressing the
alarm off button.
The audible alarm could have been triggered
by:
The cabinet having been recently switched
on and the temperature still being too high.
See the chapter "Switching on and setting
the temperature".
The door may have been open for so long
that the `door open' alarm was triggered.
It is too warm inside the
freezer.
Set a lower temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
If warm food products have been put inside
the freezer, wait for a couple of hours and
then check the temperature again.
Distribute the food products to allow cold air
to circulate around them.
It is too cold inside the freezer.
Set a warmer temperature.
Fast Freeze could have been switched on.
The temperature display shows the highest
temperature inside the cabinet. Thus a
difference between the temperature indicated
on the display and the (average) temperature
measured in another way is normal.
Too much frost and ice are
produced.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
The compressor operates
continuously.
Set a warmer temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
The temperature where the cabinet is placed
is above normal room temperature.
17
No ice
The ice machine is not switched on. Start the
ice machine. See the section "Switching the
ice machine on and off".
No water supply. Carry out the necessary
measures on the water supply.
The ice dispenser lamp and
the yellow indicator lamp (I)
flashes
Leakage in the connection box. Drain the
water from the box and tighten the hose nut.
Storage temperature too high. Lower the
temperature in the refrigerator.
The ice dispenser lamp and
the yellow indicator lamp (I)
flashes. No ice comes out.
No water supply. Carry out the necessary
measures on the water supply.
Re-set the system by pressing the button (G).
The cabinet does not operate
at all. Cooling or interior light
does not operate. No indicator
lamps light.
The cabinet is not switched on.
Power does not reach the cabinet. (Try
connecting another electrical device to the
power outlet.)
The fuse has blown.
The power plug is not properly connected.
Sound level in cabinet is too
high.
The refrigerating system will always produce
some sounds. A pulsing sound is heard when
coolant is pumped inside the cooling pipes.
A ticking sound from the thermostat can be
heard when the compressor switches on and
off. The sound level varies depending on the
operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the
cabinet do not touch each other. Carefully
bend them if they do.
If the cushion spacers (between the cabinet
wall and pipes) come loose, put them back in
place again.
Carefully follow the instructions in the chapter
"Installing the cabinet".
A regular rattling noise.
The ice being stirred to prevent it from
freezing together. No measure necessary, this
sound is normal.
As an alternative, activate the night setting.
18
Power failure
Do not unnecessarily open the cabinet,
except when the power cut seems to be
long, in which case the food products should
be moved to another cabinet that works. If
the frozen products are still hard following the
power cut, they may be immediately refrozen.
If the food products have thawed but are still
fresh, they may be used, however they
should be prepared before re-freezing or
eating them.
TECNICAL SPICIFICATION
Model
EUFG29800W/EUFG29800X
Net capacity Freezer l
252
Energy consumption kWh/y
324
Freezing capacity 24 hours
15
Rising time h
10
Dimension mm
Height
1800
Width
595
Depth
650
Permissible water pressure (to ensure reliable function).
The total flow in the system can vary, depending on local water conditions
and/or water pressure.
Lowest permissible water
pressure. 1 bar (100kPa)
Consult your installer if water pressure is
less than 1 bar.
Highest permissible water
pressure. 10 bar (1MPa)
If water pressure exceeds 10 bar, than a
reduction valve must be fitted (available
from your specialist shop).
Do not connect the refrigerator in spaces where ambient temperature can
decrease to below freezing.
The refrigerator may only be connected to drinking water supplies.
The refrigerator may only be connected to cold water supplies.
19
INSTALLATION
Unpacking
Unpack the cabinet and check that it
is in good condition and free of any
transport damage. Notify the dealer
immediately of any damage. Hand the
packaging over for recycling. For more
information, contact your local council
or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Remove the transport supports
Remove the transport supports placed
along the door sides.
Some models are fitted with a silencing
pad under the cabinet. Do not remove
this pad.
The refrigerator is to be connected
with a shut-off cock. There are different
type-approved taps and tap
assemblies on the market.
The water hose must not be cracked,
squeezed or be in tight bends.
If you require a longer water hose than
that supplied, then a VDE-approved
150 38 85-02/0 supply hose should be
used.
Before the refrigerator is taken into use
in its final location, ensure that the
water connection has been correctly
carried out, that there is no leakage at
the connection to the refrigerator water
valve or to the water tap, and that the
four spacers are properly in position,
see the illustration.
Cleaning
Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergent and a soft cloth.
Connecting the water hose.
The water coupling is connected to a
water tap with an external 3/4 inch
thread.
This work is to be carried out by a
skilled plumbing installation technician.
20
We recommend that the refrigerator is
placed on a "run-off" mat intended for
refrigerators and freezers, which
makes it easier to detect possible
leakage.
When the water system is started for
the first time.
The following should be carried out
when the refrigerator is correctly
connected to the water supply in the
building:
Open the tap on the water connection
and start up the refrigerator. The ice
machine starts automatically. It will
start filling with water will start when
the temperature is sufficiently low. Do
not use ice produced during the first
day since there is risk of a slight taste.
Electrical cord
Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circuit, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manufacturer or
a similarly qualified person may adjust
it in order to avoid shock hazard for the
user.
Installing the cabinet
When two appliances are placed
beside each other, the spacers
enclosed in the plastic wrapping
should be glued between the
appliances. As shown in the
illustration.
21
Make sure that the power plug is not
squashed or damaged by the back of
the product.
· A damaged power plug may
overheat and cause a fire.
Do not place heavy articles or the
product itself on the power cord.
· there is a risk of a short circuit and
fire.
If the power plug socket is loose, do
not insert the power plug.
· there is a risk of electric shock or
fire.
To obtain the best performance from
the cabinet, ensure:
· the cabinet is placed in a dry, cool
place and is not exposed to direct
sunlight.
· the cabinet is not placed close to a
source of heat, e.g. a cooker or
dishwasher.
· the cabinet is level. The cabinet
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.
· there is good air circulation around
the cabinet and that the air channels
below and behind the cabinet are not
blocked. The ventilation space above
the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard.
In this case, the space behind the
cupboard must be at least 50 mm deep.
b)
a)
50mm
mm to allow the door to open enough
so that the baskets can be removed.
The power plug must be accessible
after installation of the cabinet.
Door Reversal
Important!
If necessary for your installation, the
door hinge may only be adapted by
an authorised plumbing technician. If
you need to re-hang the door,
contact your local Electrolux service
centre.
Electrical connection
Cabinet is placed at a location where
the ambient temperature corresponds
to the climate classification*, for which
the appliance is designed.
* See on the rating plate on the inside
of the appliance.
The following table shows which
ambient temperature is correct for
each climate classification.
Climate
classification
SN
for an ambient
temperature of
+10°C to +32°C
N
+16°C to +32°C
ST
+18°C to +38°C
T
+18°C to +43°C
If the cabinet is placed in a corner and
the side with the hinges facing the
wall, the distance between the wall
and the cabinet must be at least 15
This appliance must be earthed.
If the plug that is fitted to your
appliance is not suitable for your
socket outlett, it must be cut of and
the appropriate plug fitted.
Remove the fuse from the cut off
plug.The cut off plug should then be
disposed of to prevent the hazard of
socket inanother part of your home.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and yellow
Blue
Brown
-Earth
-Neutral
-Live
If you fit your own plug, the colours of
the Wires in the mains lead of your
appliance may not correspond with
the markings identifying the terminals
in your plug, proceed as follows:
22
marked with the letter "E" or the earth
symbol
yellow.
or coloured greeen and
Connnect the blue (neutral) wire to the
terminal in the plug which is marked
with the letter "N" or coloured black
Connect the brown (live) wire to the
terminal in the plug which is marked
with the letter "L" or coloured red.
The plug moulded onto the lead
incorporates a fuse. For replacement,
use a 13amp BSI362 fuse. Onely
ASTAor BSI approved fuses should be
used.
The plug must not be used if the fuse
cover/carrier is lost. The cover/carrier
is indicated by the coloured insert at
the base of the plug.
A replacement cover/carrier must be
obtained from your local Service Force
Centre.
23
Guarantee/Customer Service
Standard guarantee conditions
We, Electrolux, undertake that if within
12 months of the date of the purchase
this Electrolux appliance or any part thereof is proved to be defective by reason
only of faulty workmanship or materials,
we will, at our option repair or replace
the same FREE OF CHARGE for labour,
materials or carriage on condition that:
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
• The appliance has been used for
normal domestic purposes only, and
in accordance with the manufacturer’s instructions.
• The appliance has not been serviced, maintained, repaired, taken
apart or tampered with by any person not authorised by us.
• Electrolux Service Force Centre must
undertake all service work under this
guarantee
• Any appliance or defective part replaced shall become the Company’s
property.
• This guarantee is in addition to your
statutory and other legal rights.
Exclusions
• Damage or calls resulting from transportation, improper use or neglect,
the replacement of any light bulbs or
removable parts of glass or plastic.
• Costs incurred for calls to put right
an appliance which is improperly installed or calls to appliances outside
the United Kingdom.
• Appliances found to be in use within
a commercial environment, plus those which are subject to rental agreements.
• Products of Electrolux manufacturer
that are not marketed by Electrolux
Service and Spare Parts
In the event of your appliance requiring
service, or if you wish to purchase spare
parts, please contact your local Service
Force Centre by telephoning
0870 5 929 929
Your telephone call will be automatically
routed to the Service Force Centre covering your postcode area.
For the address of your local Service
Force Centre and further information
about Service Force, please visit the
website at
www.serviceforce.co.uk
Before calling out an engineer, please
ensure you have read the details under
the heading “Something not working”
When you contact the Service Force
Centre you will need to give the following details:
1.Your name, address and postcode.
2.Your telephone number.
3. Clear concise details of the fault.
4. The model and Serial number of the
appliance (found on the rating plate).
5.The purchase date.
Please note a valid purchase receipt or
guarantee documentation is required for
in guarantee service calls.
24
Customer Care
For general enquiries concerning your
Electrolux appliance, or for further information on Electrolux products please
contact our Customer Care Department
by letter or telephone at the address below or visit our website at www.electrolux.co.uk
Customer Care Department
Electrolux Major Appliances
Addington Way
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 950 950 (*)
(*) Calls may be recorded for training
purposes
European Guarantee
This appliance is guaranteed by Electrolux in
each of the countries listed at the back of this
user manual, for the period specified in the
appliance guarantee or otherwise by law. If
you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to
the following qualifications:• The appliance guarantee starts from the
date you first purchased the appliance
which will be evidenced by production of a
valid purchase document issued by the
seller of the appliance.
• The appliance guarantee is for the same
period and to the same extent for labour
and parts as exists in your new country of
residence for this particular model or range of appliances.
• The appliance guarantee is personal to the
original purchaser of the appliance and
cannot be transferred to another user.
• The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home,
i.e. is not used for commercial purposes.
• The appliance is installed in accordance
with all relevant regulations in force within
your new country of residence.
The provisions of this European Guarantee do
not affect any of the rights granted to you by
law.
www.electrolux.com
p
t
b
Albania
+35 5 4 261 450
Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/
Belgien
+32 2 363 04 44
Bergensesteenweg 719, 1502 Lembeek
Èeská republika
+420 2 61 12 61 12
Budìjovická 3, Praha 4, 140 21
Danmark
+45 70 11 74 00
Sjællandsgade 2, 7000 Fredericia
Deutschland
+49 180 32 26 622
Muggenhofer Str. 135, 90429 Nürnberg
Eesti
+37 2 66 50 030
Mustamäe tee 24, 10621 Tallinn
España
+34 902 11 63 88
Carretera M-300, Km. 29,900
Alcalá de Henares Madrid
France
www.electrolux.fr
25
p
t
b
Great Britain
+44 8705 929 929
Addington Way, Luton, Bedfordshire
LU4 9QQ
Hellas
+30 23 10 56 19 70
4 Limnou Str., 54627 Thessaloniki
Hrvatska
+385 1 63 23 338
Slavonska avenija 3, 10000 Zagreb
Ireland
+353 1 40 90 753
Long Mile Road Dublin 12
Italia
+39 (0) 434 558500
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Latvija
+37 17 84 59 34
Kr. Barona iela 130/2, LV-1012, Riga
Lietuva
+370 5 2780609
Verkių 29, LT09108 Vilnius
Luxembourg
+35 2 42 43 13 01
Rue de Bitbourg, 7, L-1273 Hamm
Magyarország
+36 1 252 1773
H-1142 Budapest XIV,
Erzsébet királyné útja 87
Nederland
+31 17 24 68 300
Vennootsweg 1, 2404 CG Alphen aan den Rijn
Norge
+47 81 5 30 222
Risløkkvn. 2 , 0508 Oslo
Österreich
+43 18 66 400
Herziggasse 9, 1230 Wien
Polska
+48 22 43 47 300
ul. Kolejowa 5/7, Warsaw
Portugal
+351 21 440 39 00
Quinta da Fonte - Edificio Gonçalves Zarco Q 35
2774 - 518 Paço de Arcos
Romania
+40 21 451 20 30
Str. Garii Progresului 2, S4, 040671 RO
Schweiz/Suisse/
Svizzera
+41 62 88 99 111
Industriestrasse 10, CH-5506 Mägenwil
Slovenija
+38 61 24 25 731
Electrolux Ljubljana, d.o.o.
Tržaška 132, 1000 Ljubljana
Slovensko
+421 2 43 33 43 22
Electrolux Slovakia s.r.o., Electrolux Domáce
spotrebièe SK, Seberíniho 1, 821 03 Bratislava
Suomi
+35 8 26 22 33 00
Konepajanranta 4, 28100 Pori
Sverige
+46 (0)771 76 76 76
Electrolux Service, S:t Göransgatan 143,
S-105 45 Stockholm
Türkiye
+90 21 22 93 10 25
Tarlabaþý caddesi no : 35 Taksim
Istanbul
Ðîññèÿ
+7 495 9377837
129090 Ìîñêâà, Îëèìïèéñêèé ïðîñïåêò, 16,
ÁÖ „Îëèìïèê“
26
27
www.electrolux.com
www.electrolux.uk
8184107-00/4 022007