Surge Protection For Business-Critical ContinuityTM Edco SPA-300 Medium Duty 120 VAC — 1 Phase The Edco SPA-300 is designed to protect sensitive electronic equipment such as traffic controllers, from high energy surges. The Edco SPA-300 incorporates MOV technology which clamps these surges before equipment damage occurs. The Edco SPA-300 is intended for use on bonded neutral to ground applications. General Technical Specifications Part Number Edco SPA-300 Operating Voltage 120 VAC Clamping Voltage 395 VAC Operating Current NA Peak Surge Current 40 kA/Mode/Phase/Total Operating Frequency 47-63 Hz EMI Attenuation NA SPD Technology MOVs Status Indication NA Connection Type 1/4 -20 Stainless Steel Stud Operating Temperature -40°C to +85°C Dimensions (Inches) 1.875H x 2.875W x 5.25L Weight Features 40 kA surge protection Fast response time Solid-state design Epoxy encapsulated 5 year warranty 1 lb Installation Hot 120 VAC Load SPA-300 Neutral Ground Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. Headquarters Surge Protection 328 Water Street Binghamton, NY 13901 T: (607) 721-8840 T: (800) 288-6169 F: (607) 722-8713 E: firstname.lastname@example.org Hole 3/16" Caution This product should be installed and serviced by qualified service technicians or personnel only. PLATE 2.875" 4.875" Remove power before installation or service. 5.25" AC Power Embedded Computing Outside Plant Racks and Integrated Cabinets Connectivity Embedded Power Power Switching & Control Services DC Power Monitoring Precision Cooling Surge Protection Emerson Network Power Contact information IO-50132 2/09 Rev. 1 Printed in USA Mounting Line www.emersonnetworkpower.com 650 SW 27th Avenue Ocala, FL 34471 T: (352) 732-3029 T: (800) 648-4076 F: (352) 867-1237 Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2009 Emerson Electric Co.