Owner’s Manual
Please read before using this equipment.
DVD/CD Player with Video Cassette Recorder
EWD2204
EMERSON AND THE G-CLEF LOGO ARE
REGISTERED TRADEMARKS OF
EMERSON RADIO CORP., PARSIPPANY,
NEW JERSEY, U.S.A.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
........2
........3
........4
........4
........4
........4
........4
........4
Setup
■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5
Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8
■ VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ Preset for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10
Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Supplied Accessory
• Remote control
• RF cable
(NB100UD or NB150UD)
(WPZ0901TM002)
with two AA batteries
VCR Functions
• Audio/Video cables
(WPZ0102TM015 or
WPZ0102LTE01)
■
■
■
■
■
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording & OTR (One Touch Recording) .
Other Operations . . . . . . . . . . . . . . . . . . . .
On-Screen Operations . . . . . . . . . . . . . . . .
Recording Features . . . . . . . . . . . . . . . . . .
Timer Recording. . . . . . . . . . . . . . . . . . . . . .
Hint for Timer Recording. . . . . . . . . . . . . . . .
Copying a Video Tape. . . . . . . . . . . . . . . . . .
■ Special Features . . . . . . . . . . . . . . . . . . . . .
Time Search / Index Search / Auto Repeat . .
• Owner’s Manual
(0VMN04085)
Owner's Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11
11
11
12
12
12
13
13
14
14
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Track Search / Title/Chapter Search / Time Search . . . . . . . . .
Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat / Random / Programmed Playback . . . . . . . . . . . . . .
Repeat Playback / Repeat A-B Playback /
Random Playback / Programmed Playback. . . . . . . . . . . . . . . .
Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Subtitle Language / Audio Language / Camera Angle /
Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . .
DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To return the All Selections of SET UP (except for PARENTAL) to the Default Setting
15
16
16
17
17
17
18
DVD Functions
■
■
■
■
■
■
■
■
If you need additional operating assistance after
reading this owner’s manual or to order replacement accessories, please call
18
19
19
20
20
21
21
22
22
Information
TOLL FREE : 1-800-256-2487
■
■
■
■
or visit our web site at http://www.funai-corp.com
Troubleshooting Guide .
Specifications . . . . . . . .
Language List . . . . . . . .
Limited Warranty . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
23
24
24
24
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Setup
.
.
.
.
.
.
.
.
DVD Functions VCR Functions
Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Important Safeguards . . . . . . . . . . . . . . . . . . .
Installation Location . . . . . . . . . . . . . . . . . . . . .
Avoid the Hazards of Electrical Shock and Fire.
Moisture Condensation Warning . . . . . . . . . . . .
About Copyright . . . . . . . . . . . . . . . . . . . . . . . .
Symbol Used in This Manual . . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .
Information
Precautions
Precautions
Table of Contents
Cable
Signal
Cable
Signal
Antenna
or
Disconnect
(Back of TV)
Antenna (Back of
DVD/VCR)
or
2
Connect
(Back of TV)
ANT-IN
ANT-OUT
3
Connect
RF Cable (supplied)
5
Please refer to "Connections" on page 5.
4
AC
outlets Plug in
From
DVD/VCR
From
TV
Español
Basic TV Connection
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
Precautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future
reference.
Model No. _____________________
Serial No. _____________________
–2–
EN
Important Safeguards
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
Precautions
1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use
a
damp
cloth
for
cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the
appliance should follow the manufacturer's instructions and should use a
mounting accessory recommended by
the manufacturer. An appliance and cart
combination should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the
video product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the video product on a
bed, sofa, rug, or other similar surface. This video product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This video product should be operated
only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with regard to
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might
be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any
way.
f. When the video product exhibits a distinct change in performance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–3–
EN
Installation Location
Maintenance
Precautions
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid
places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the DVD/VCR
cassette holder.
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Symbol Used in This Manual
The following symbols appear in some headings and notes in this manual.
VCR
SERVICING
¡Please refer to relevant topics on the Troubleshooting
Guide on page 23 before return the product.
¡When this unit become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents
or antistatic spray intended for analogue records.
CLEANING THE DISC LENS
¡If this unit still does not perform properly although
you refer to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Owner’s Manual, the
laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.
DISC HANDLING
¡Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
¡Always store the disc in its protective case when it is
not used.
AUTO HEAD CLEANING
¡Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
¡Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated on the video heads after a long period of
use, or the usage of rental or worn tapes can cause
this problem. If a streaky or snowy picture appears
during playback, the video heads in your DVD/VCR
may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page
to locate an Authorized Service Center.
NOTES:
¡Remember to read the instructions along with the
video head cleaner before use.
¡Clean video heads only when problems occur.
: Description refers to playback or recording of video
cassette tapes.
Note to CATV system installer
DVD-V
: Description refers to playback of DVD-Video discs.
CD
: Description refers to playback of Audio CDs.
MP3
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
: Description refers to playback of MP3 files.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
–4–
EN
Setup
About the Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
with this unit.
Playable Discs
Playable
discs
Mark (logo)
DVD-Video
Region code
Recorded
signals
Disc size
Digital video
(MPEG2)
12 cm
or
8cm
Disc types
or
* 1,2,4,6
DVD-R
DVD-RW
-
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
* 1,2,3,4,5,6
DVD+R
DVD+RW
-
* 1,2,3,4,5,6
* 4,6
-
CD-R
CD-RW
* 4,5,6
Digital audio
or
MP3
12 cm
or
8cm
Track 1
MP3
Track 2
Example
Track 1
Track 3
Track 4
Track 5
Track 4
Track 5
Group 1
Track 2
Track 3
Setup
Digital audio Example
Audio CD
Track 6
Group 2
Track 6
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Only the discs which have been recorded in the video format and finalized can be played back.
Discs unfinalized or recorded in the video recording format cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all or normally
(the picture or sound may be not be smooth, etc.).
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.
Even if they are played back, the sound or video quality will be compromised.
Unplayable Discs
¡On the following discs, only the sound can be heard (picture cannot be viewed).
CDV
CD-G
¡NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM
CD-I
Photo CD
Video CD
DVD with region codes other than 1 or ALL
DTS-CD
DVD-ROM for personal computers
CD-ROM for personal computers
¡On the following disc, the sound MAY NOT be heard.
Super Audio CD
Note: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡Any other discs without compatibility indications.
Connections
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 is already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.
• If noise appears on the TV screen, press the VCR/TV button on the remote control.
4) Press the PLAY button once.
5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.
• The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.
• When a picture does not appear on the TV screen, repeat step [4].
6) Press the STOP button to stop playback.
–5–
Hint
• The RF output channel may
not change when you adjust
tracking during playback. In
this case, stop the playback,
and start the playback again.
After that, press the PLAY
button on the DVD/VCR for 3
seconds again.
EN
Hint for Cable Box or Satellite Box
Connection A
(Cable box or
Satellite box)
IN
OUT
(Back of DVD/VCR)
Connection B
(Back of DVD/VCR)
ANT-IN
ANT-IN
ANT-OUT
Cable
Signal
Cable
Signal
E
RF Cable
(supplied)
(Back of TV)
ANT-OUT
(Cable box or
Satellite box)
IN
RF Cable (supplied)
Setup
Select this connection when you want to view or record a scrambled channel. With this connection, channels cannot be changed
on the DVD/VCR. You can view or record ONLY the channels you
have selected on the cable box or the satellite box.
• While you are recording, only the recorded channel can be
viewed.
To select channels of the cable box or satellite box
1) Turn on the DVD/VCR by pressing the POWER button, and
then, press the VCR/TV button.The “POWER” light on the front
panel will appear. Then, press the CHANNEL buttons to select
channel 3 or 4 (the same channel as the output channel of the
cable b ox or satellite box).
• If you use the channel 4, you need to change the DVD/VCR’s
RF output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel 3 or 4 (the same channel as you
have selected at step 1).
3) At the cable box or satellite box, select the channel you want to
view or record.
E
OUT
RF Cable
(Back of TV)
Select this connection when you want to change channels on the
DVD/VCR. With this connection, you may watch one channel
while recording another.
• You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the
same channel as the DVD/VCR’s RF output channel.)
• Refer to “RF Output Channel”.
2) At the TV, select the same channel as the output channel (3 or
4) of the cable box or satellite box.
3) Turn on the DVD/VCR by pressing the POWER button, and
then, press the VCR/TV button. The “POWER” light on the front
panel will appear. Then, select the channel you want to view or
record.
To play back a tape
Follow the steps 1) to 2) above. Then, play back a tape.
• Refer to “Playback” on page 11.
To view one channel while recording another
1) While you are recording on the DVD/VCR, press the VCR/TV button.
2) At the cable box or satellite box, select the channel you want to view.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Analog audio
input jacks
AUDIO
L
R
COAXIAL
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
DVD/VCR
DVD/VCR
VCR
AUDIO OUT
(Analog)
AUDIO OUT
DIGITAL
AUDIO OUT
L
AUDIO IN
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
COMPONENT
VIDEO OUT
Y
L
R
VIDEO OUT
S-VIDEO
OUT
CB
COAXIAL
VIDEO IN
R
CR
or
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
L
CB
COAXIAL
R
CR
Note
• If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder, and set “DOLBY DIGITAL” to “ON” in the
AUDIO menu. (Refer to pages 20-21.)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set “DOLBY
DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD
using incorrect settings may generate noise distortion, and
may also damage the speakers. (Refer to pages 20-21.)
• Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu for connecting to an MD deck or DAT deck. (Refer to pages 2021.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality 5.1ch Dolby Digital
surround sound as heard in the movie theaters.
–6–
EN
Connection to a TV
Basic Audio
TV
Method 1
Method 2
Method 3
Good picture
Better picture
Best picture
COMPONENT
VIDEO IN
AUDIO IN
L
Y
S-VIDEO IN
VIDEO IN
R
CB
CR
Video
cable
(supplied)
DIGITAL
AUDIO OUT
DVD/VCR
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
COAXIAL
AUDIO OUT
L
L
DIGITAL
AUDIO OUT
R
R
VIDEO IN
S-VIDEO
OUT
R
ANT-OUT
CB
VIDEO OUT
VIDEO IN
COMPONENT
VIDEO OUT
L
CR
VIDEO OUT
DVD
AUDIO
OUT
Y
AUDIO IN
ANT-IN
VIDEO OUT
R
VCR
AUDIO IN
VCR
AUDIO IN
L
CB
DVD/VCR
VCR
AUDIO OUT
Component
Video cables
(commercially
available)
COAXIAL
VIDEO IN
DIGITAL
AUDIO OUT
R
DVD
AUDIO
OUT
S-VIDEO
OUT
Setup
Audio cable
(supplied)
DVD/VCR
S-Video
cable
(commercially
available)
COMPONENT
VIDEO OUT
Y
CR
L
or
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
VIDEO OUT
S-VIDEO
OUT
CB
S-VIDEO OUT
COAXIAL
COMPONEN
VIDEO OUT
R
CR
L
COMPONENT VIDEO OUT
C
COAXIAL
R
C
(Analog) AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
Front & Rear Terminals
DVD ANALOG AUDIO OUT
jacks
Connect the supplied audio
cables here through the Audio
In jacks of a television or other
audio equipment. (DVD only)
COAXIAL jack
Connect an optional coaxial
digital audio cable here
through the coaxial digital
audio in jack of a decoder or
audio receiver. (DVD only)
S-VIDEO OUT jack
Connect an optional
S-Video cable here
through the S-video
in jack of a television. (DVD only)
DVD/VCR AUDIO OUT jacks
Connect the supplied audio
cables here through the audio
In jacks of a television or other
audio equipment.
DVD/VCR
DVD
DIGITAL
AUDIO S-VIDEO
OUT
AUDIO OUT OUT
COMPONENT
VIDEO OUT
DVD
AUDIO
L
L
COAXIAL
COMPONENT VIDEO
OUT jacks
Connect optional component
video cables here through
the component video in
jacks of a television.
(DVD only)
COAXIAL
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
VCR
POWER
VIDEO
REW
F.FWD
S
AUDIO
ANT-IN
AUDIO IN
AUDIO IN CB/
PB
R
VIDEO OUT
RR
VIDEO OUT
R
ANT-IN
VCR
AUDIO OUT
DIGITAL
Y AUDIO OUT LOUT
CB
AUDIO IN jack
Connect audio cable coming
ANT IN jack
from the audio out jack of a
camcorder, another VCR, or an Connect your antenna
or cable box here.
audio source here.
VIDEO IN
ANT-OUT
C R/
PR
ANT-OUT
VIDEO IN
CR
[Back of DVD/VCR]
DVD/VCR VIDEO OUT jack
Connect the supplied yellow
video cable here through
the TV’s video in jack.
–7–
VIDEO IN jack
Connect a cable coming from the video out
jack of a camcorder,
another VCR, or an
audio-visual source
(laser disc player, video
disc player, etc.) here.
[Front of
DVD/VCR]
ANT OUT jack
Connect the
supplied RF
cable to the
antenna input
jack on your TV.
EN
About the Remote Control and Front Panel
VCR mode
DVD mode
Remote Control
POWER
1
SPEED
AUDIO
2
3
Disc/Tape
Button
(Alphabetical order)
1
2
3
4
5
6
7
8
9
0
+10
OPEN/CLOSE
/EJECT
SKIP/CH.
4
5
6
7
8
9
0
+10
DISPLAY
VCR
DVD
DVD-V
CD
MP3
• To select chapter or title directly. • To select track directly.
• To select channel.
• The +10 button has no effect
in VCR mode.
• To search forward/backward
through a disc.
• To search forward/backward
• To begin slow forward/reverse
through a disc.
playback during the pause mode.
• To forward/backward a tape.
VCR/TV
ENTER
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
A-B
• To repeat between your
chosen point A and B.
• To repeat between your
chosen point A and B. (CD)
SLOW
PAUSE
PLAY
ANGLE
• To select camera angles on
a disc.
AUDIO
• To select audio languages on • To select STEREO,
a disc.
L-CH or R-CH. (CD)
STOP
REC/OTR
MENU
ENTER
SETUP
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
RETURN
CLEAR/
C. RESET
Setup
DISPLAY
MENU
• To clear the markers.
• To clear the numbers
entered incorrectly.
• To clear the markers. (CD)
• To remove status No.
in program input.
• To clear the numbers
entered incorrectly.
• To exit the VCR Menu.
• To reset the tape counter.
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and channel.
• To call up the Menu
on a disc.
• To call up the MP3 menu.
(MP3)
• To set black level on/off.
• To arrange the playing
order or play randomly.
• To open or close the disc
tray.
• To open or close the disc
tray.
• To eject the video cassette
from the VCR.
• To pause disc playback.
• To advance playback
one frame at a time.
• To pause disc playback.
• To pause tape playback or
recording.
• To advance playback
one frame at a time.
• To begin disc playback.
• To begin disc playback.
• To begin tape playback.
• To turn the unit on or off.
• To turn the unit on or off.
• To turn the unit on or off.
MODE
OPEN/CLOSE
/EJECT
PAUSE
Install two AA batteries
(supplied) matching the polarity indicated inside battery compartment of
the remote control.
PLAY
REC/OTR
REPEAT
RETURN
SEARCH
MODE
3
SETUP
SKIP/CH.
SKIP/CH.
• To start a recording.
• To play a track or disc
repeatedly. (CD)
• To play a chapter or title
• To play a track, group or disc
repeatedly.
repeatedly. (MP3)
• To return to the previous
• To return to the previous
operation on the DVD setup
operation on the DVD setup
menu.
menu.
• To search track.
• To search chapter, title or time. • To search time. (CD)
• To call up the index or time
• To rapidly return to
• To rapidly return to
search menu.
a location of disc.
a location of disc.
• Search the markers.
• Search the markers. (CD)
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To skip chapters.
• To skip tracks.
SLOW
Keep in mind the following when using
the remote control:
• Make sure that there is no obstacle between the remote and the
remote sensor on the unit.
• Use within the operating range
and angle, as shown.
STOP
SUBTITLE
T-SET
V.SURR
Remote
control
• To select the recording speed.
• To stop playback.
• To stop playback.
• To call up the Top Menu
on a disc.
• To stop playback or recording.
• To put the VCR into standby
mode for a timer recording.
• To select subtitles on a disc.
• To return to the top file of the
highest hierarchy in the program
and MP3 menu. (MP3)
• To select the VCR output
mode.
• To activate the remote control
in VCR mode.
VCR
VCR/TV
• To change channels.
• To adjust the tracking manually
during playback.
• To view the tape
in slow motion.
SPEED
TOP MENU
ut
bo m)
a
in (7
ith t
W 3 fee
2
• To call up the VCR Menu.
POWER
1
2
• To select an item
on the VCR Menu.
• To advance to the next
VCR Menu.
• To go back one step during
clock and timer setting.
• To select the DVD output
• To select the DVD output
mode.
mode.
• To activate the remote control • To activate the remote control
in DVD mode.
in DVD mode.
DVD
Installing the Batteries
for the Remote Control
VCR
• To select DVD position or
TV position.
• To select CD/MP3 position
or TV position.
• To select VCR position or
TV position.
• To set virtual surround on/off. • To set virtual surround on/off.
–8–
EN
Front Panel Display
Lights up when the disc is inserted.
Lights up when power is on.
Lights up when the inserted
disc is being played back.
Flashes when an unacceptable disc is installed.
Lights up during a recording.
Flashes when a recording is paused.
OPEN/CLOSE
POWER
VIDEO
REW
F.FWD
STOP/EJECT
PLAY
VCR
TIMER REC
REC /OTR
OUTPUT
DVD
CHANNEL
DISC IN
SKIP/REV
STOP
PLAY
FWD/SKIP
AUDIO
Setup
Lights up when the timer recording
or an OTR recording has been set.
VCR/DVD Switching
Because this product is a combination of a VCR and a DVD player, you must select first which
component you wish to operate with the OUTPUT button.
VCR MODE
OPEN/CLOSE
POWER
Press the VCR button on the remote control.
(Verify that the VCR OUTPUT light is lit.)
POWER
VIDEO
REW
F.FWD
STOP/EJECT
PLAY
TIMER REC
REC /OTR
VCR
OUTPUT
CHANNEL
DVD
DISC IN
SKIP/REV
STOP
PLAY
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
0
+10
DISPLAY
VCR
DVD
OPEN/CLOSE
/EJECT
FWD/SKIP
AUDIO
SKIP/CH.
VCR/TV
DVD MODE
VCR button
Press the DVD button on the remote control.
(Verify that the DVD OUTPUT light is lit.)
VCR
OUTPUT
SLOW
PAUSE
DVD button
DVD
PLAY
SKI
STOP
REC/OTR
Note
• Pressing only the OUTPUT button on the front
panel DOES NOT switch the mode of the
remote control. You MUST select the correct
mode on the remote control.
–9–
DVD OUTPUT
light
OUTPUT button
ENTER
MENU
RETURN
SETUP
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
VCR OUTPUT
light
EN
Preset for Use
Turn on the unit for the first
time
VCR
VCR
1
Turn on the TV and set it
to channel 3.
• If channel 3 is already occupied for broadcasting,
see“RF Output Channel” section.
To Preset the Channel Again
To Change the On-Screen Language
2
POWER
Remote Control
TV Screen
LANGUAGE SELECT
B ENGLISH
or
[ON]
FRANCAIS
Setup
ESPAÑOL
1) Press the MENU button until the main
menu appears.
2) Select "LANGUAGE SELECT" by pressing the K or L button. Then, press the B
button.
3) Select "ENGLISH" , "FRANCAIS" or
"ESPAÑOL" by pressing the K or L button. Then, press the CLEAR/C.RESET
button.
Hint
3
CH 01
AUTO SET UP
4
CLOCK SET
1) Press the MENU button until the main
menu appears.
2) Select "CHANNEL SET UP" by pressing
the K or L button. Then, press the B button.
3) Select "AUTO SET UP" by pressing the
K or L button. Then, press the B button.
After scanning, the tuner stops on the lowest memorized channel.
• If you accidentally select Spanish or
French and need English: Press the
MENU button and choose SELEC.
IDIOMA, or SELECTION LANGUE. Press
the B button, and select ENGLISH. Finally,
press the CLEAR/C.RESET button.
or
MONTH DAY
03 / 15
YEAR
2004
HOUR MINUTE
–– : ––
AM/PM
––
Select the current year
5
CLOCK SET
or
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
05 : ––
AM/PM
––
Select the current hour
6
CLOCK SET
or
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
05 : 40
AM/PM
––
Select the current minute
Clock Set Up
VCR
VCR
Do you connect the cable from the cable box or
the satellite box to the DVD/VCR’s ANT IN jack?
1
-MENU-
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
YES
Yes Press the MENU
7
CLOCK SET
or
HOUR MINUTE
05 : 40
button to exit
• Refer to “Hint for Cable Box
or Satellite Box” section on
page 6.
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
or
NO
No Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized
channel.
• You can select only the channels memorized in this unit by using the CHANNEL
buttons.
• If "AUTO SET UP" appears on the TV
screen again, check the cable connections.
Then, press the B button once again.
• If the clock is not set, the
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
CLOCK SET
or
MONTH DAY
03 / ––
YEAR
––––
HOUR MINUTE
–– : ––
AM/PM
––
Hint
To exit the CLOCK SET
screen.
Hint
Select the current month
• Repeat these steps only if either there
was a power failure or this unit has been
unplugged for more than 30 seconds.
To Select a Channel
You can select a channel by directly
entering channel using the Number buttons on the remote control.
Notes for using the Number buttons:
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
• You must precede single-digit channel
numbers with a zero (For example:
02, 03, 04 and so on).
Select “AM” or “PM”
8
2
AM/PM
P M AM
B PM
3
• To go back one step, press the s button
(during the steps [2] to [7].)
• Your clock setting will be lost if either there
is a power failure or this unit has been
unplugged for more than 30 seconds.
CLOCK SET
or
MONTH DAY
03 / 15
YEAR
––––
HOUR MINUTE
–– : ––
AM/PM
––
Select the current day
– 10 –
EN
VCR Functions
Playback
Before:
Turn on the TV and set it to
channel 3.
1
4
POWER
• If channel 3 is already occupied for broadcasting, see “RF Output Channel” section.
SPEED
AUDIO
1
2
3
4
5
6
Hint
OPEN/CLOSE
/EJECT
SKIP/CH.
VCR
OPEN/CLOSE
VCR/TV
VCR
7
8
9
0
+10
VCR
DVD
POWER
REW
F.FWD
STOP/EJECT
PLAY
TIMER REC
REC /OTR
V
CHANNEL
SLOW
1
2
Remote Control
TV Screen
PLAYB
PLAY
DISPLAY
2
VIDEO
PAUSE
PLAY
3 2
4
3
STOP
REC/OTR
3
AUDIO
• When a tape without record tab is
inserted, the
DVD/VCR will start
playback automatically.
• Tracking will be
automatically
adjusted upon playback. To adjust the
tracking manually,
press the CHANNEL buttons.
4
OPEN/CLOSE
/EJECT
STOP
STOP
EJECT A
Recording & OTR (One Touch Recording)
3
6
Hint
1
• If channel 3 is already occupied for
broadcasting, see “RF Output Channel” section.
POWER
VCR
VCR
SPEED
Remote Control
1
2
3
4
5
6
7
8
9
TV Screen
1
2
3
4
5
6
7
8
9
0
+10
DISPLAY
VCR
DVD
2
with tab
Tape Speed
T60
1hour
3hour
T120
2hours
6hour
T160
2-2/3hours
8hour
REC/OTR
REC
You can select a fixed recording time by pressing the REC/OTR button repeatedly.
REC
(Normal recording)
OTR(0:30)
STOP
REW
F.FWD
STOP/EJECT
PLAY
CHANNEL
AUDIO
5 4
6
PLAY
5
4
STOP
REC/OTR
MENU
SETUP
ENTER
TOP MENU
RETURN
STOP
OTR(1:00).....
• To view one channel while recording
another
1) While you are
recording on the
DVD/VCR, press
the VCR/TV button.
2) At the cable box
or satellite box,
select the channel
you want to view.
• If you have connected the DVD/VCR to
a cable box or satellite box, refer to
“Hint for Cable Box
or Satellite Box”
section on page 6.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record tab. To record
on it later, cover the hole with cellophane
tape.
Record tab
You CAN NOT copy a DVD to a videotape.
OTR(7:30)
OTR(8:00)
5
VIDEO
PAUSE
Recording/Playback Time
Type of tape
SP mode
SLP mode
4
CH12
• Select the desired tape
speed
SP
SPEED
POWER
TIMER REC
REC /OTR
SLOW
• Select the
desired channel
0
OPEN/CLO
VCR/TV
SKIP/CH.
3
OPEN/CLOSE
/EJECT
AUDIO
SKIP/CH.
2
1
2
6
To stop recording temporarily (Pause mode)
OPEN/CLOSE
/EJECT
EJECT A
Press the PAUSE/STILL button.
• During the rec-pause mode, five C marks appear on the TV
screen. Each C mark represents one minute.
• Press it again to resume recording.
Other Operations
To cue or review picture during playback
(Picture Search)
Counter Reset
Hint
Press the CLEAR/C.RESET button.
Press the F.FWD or REW button.
• Press it again and the DVD/VCR will search in
super high speed. (in the LP/SLP modes only)
To play back in slow motion
• Still/Slow/Pause
mode will be
automatically
cancelled after 5
minutes to prevent damage to
the tape and the
video head.
• To return to
playback from
the Picture
Search/Still/
Slow mode,
press the PLAY
button.
To freeze the picture on TV screen during playback (Still mode)
Press the PAUSE/STILL button. Each time you
press the button, the picture will be forwarded by
one frame.
• If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing the
CHANNEL buttons.
• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
Press the SLOW button during playback or the still
mode.
• If the noise bars appear on the TV screen, you can
reduce it by pressing the CHANNEL buttons.
Auto Rewind
When a tape reaches its end during playback, fast-forward, or recording (except timer recording and One
Touch Recording), the tape will automatically rewind
to the beginning. After rewinding finishes, the
DVD/VCR will eject the tape.
– 11 –
EN
VCR Functions
Before:
Turn on the TV and set it to
channel 3.
On-Screen Operations
VCR
VCR
1
2
3
4
5
6
7
8
9
0
+10
VCR
DVD
SKIP/CH.
To call up the main menu
3
To decide
VCR/TV
-MENU-
MENU
DISPLAY
PLAY
STOP
REC/OTR
To exit the menu
-MENUor
PAUSE
AUTO SET UP
B MANUAL SET UP
4
To select an item
SLOW
CHANNEL SET UP
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
1
CLEAR/
C. RESET
1
4
MENU
OR
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
MENU
ENTER
SETUP
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
RETURN
2
3
4
Recording Features
Timer Recording
•Insert a tape with its record tab into the DVD/VCR.
VCR
5
VCR
1
-MENUMENU
Select the desired start time
(hour)
9
ONE TIME PROGRAM
or
ONE TIME PROGRAM
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
or
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL
––
REC SPEED – –
VCR Functions
Select the desired recording speed
• To set another program after step [9], press the
B button. Then, continue with step [2].
Select the minute
CLEAR/
C. RESET
or
2
or
PROGRAM NUMBER 4
DATE
––/––
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL
––
REC SPEED – –
Select an empty program
number
10
3
6
ONE TIME PROGRAM
PROGRAM NUMBER 4
or
Select the desired month
ONE TIME PROGRAM
or
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL
––
REC SPEED – –
Select the desired day
or
• You can program one
year in advance.
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
CHANNEL
––
REC SPEED – –
AM
B PM
Select “AM” or “PM”
B ONCE
DAILY
WEEKLY
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”
SUBTITLE
T-SET
• TIMER REC light on the front panel appears.
The DVD/VCR will change to the DVD mode.
or
4
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL
16
REC SPEED SP
B SP
SLP
7
Repeat the procedure in steps 5
and 6 to set the end time.
8
ONE TIME PROGRAM
or
PROGRAM NUMBER 4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL
16
REC SPEED – –
Select the desired channel
• If you have connected the DVD/VCR to a
cable box or satellite box as the
Connection A on page 6, select the VCR
to channel 3 or 4 (the RF output channel
of the VCR). Then, select the desired
channel at the cable box or satellite box.
Leave the cable box or satellite box on for
timer recording.
– 12 –
Hint
• To go back one step, press the s button (during
the steps [3] to [9].)
To Check, Correct, or Cancel a
Timer Program
1) Press the SUBTITLE/T-SET button
then, the VCR button on the remote
control.
2) Select main menu by pressing the
MENU button.
3) Select "TIMER PROGRAMMING"
by pressing the K or L button.
Then, press the B button.
4) Select the program number which
you want to check by pressing the K
or L button. The details of the program you selected will appear on
the TV screen.
• Go to the digit you want to change
by pressing the B or s button.
Then, enter correct numbers by
pressing the K or L button.
• You may cancel the entire program
by pressing the s button while the
program number flashes.
5) Press the CLEAR/C.RESET button
to exit.
6) Press the SUBTITLE/T-SET button
to return to timer stand-by mode.
To cancel a Timer Recording in
progress
Press the STOP/EJECT button on
the DVD/VCR.
EN
Hint for Timer Recording
• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting
and all timer settings will be lost.
• If a tape is not in the DVD/VCR or does not have the record tab, the TIMER REC light flashes and timer
recording cannot be performed. Please insert a recordable tape.
• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER REC light flashes. (If the DVD power is off, the VCR will become STANDBY status).
• When all timer recordings are finished, the TIMER REC light will flash.
• When timer recordings are set, the TIMER REC light will appears. To use the VCR as usual until the time for
the recording, press the SUBTITLE/T-SET button so that the TIMER REC light disappears. Press the VCR/TV
button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as
described in this manual.
If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or
flashes.
• You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press
the POWER button to turn on the DVD. Press the DVD button on the remote control to choose DVD mode,
then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to
use the DVD only.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
1) Insert a pre-recorded tape into the playing VCR.
2) Insert a tape with its record tab into the recording
DVD/VCR.
3) Press the SPEED button on the remote control
or
of the recording DVD/VCR to select the desired
Connect
Connect
recording speed (SP/SLP).
4) Select the "L1" or "L2" position on the recording
RF cable
(supplied)
DVD/VCR.
Audio/Video cables
*Front input jacks are also available
• To use the input jacks on the back of this unit,
(not supplied)
select "L1" position by pressing [0], [0], [1] on
the remote control or the CHANNEL buttons.
Hint
• To use the input jacks on the front of this unit,
• For best results during dubbing, use the front panel controls whenever
select "L2" position by pressing [0], [0], [2] on
possible. The remote control might affect another source’s operation.
the remote control or the CHANNEL buttons.
• Always use video-quality shielded cables with RCA-type connectors.
5) Press the REC/OTR button on the recording
Standard audio cables are not recommended.
DVD/VCR.
• You can use a video disc player, satellite receiver, or other audio/video
6) Begin playback of the tape in another source.
component with A/V outputs.
7) To stop recording, press the STOP/EJECT button
• “L1” or “L2” is found before the lowest memorized channel. (Example:
CH02)
on the recording DVD/VCR, then stop playback of
the tape in another source.
• “L2” input jacks are on the front of this DVD/VCR.
(Back of TV)
(Back of another source)
Y
CB
AUDIO OUT
VCR
AUDIO IN
AUDIO OUT
CR
1
ANT-IN
L
L
R
R
VIDEO IN
VIDEO OUT
VIDEO OUT
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO
OUT
OUT
DVD/VCR
COMPONENT
VIDEO OUT
COAXIAL
VCR
AUDIO OUT
ANT-IN
Y
L
CB
R
2
AUDIO IN
L
ANT-OUT
VIDEO OUT
R
R
VIDEO IN
ANT-OUT
CR
– 13 –
EN
VCR Functions
DVD/VCR
COMPONENT
VIDEO OUT
(Back of Recording DVD/VCR*)
Special Features
Time Search
Index Search
You can specify the time for fast
forwarding or rewinding.
• Insert a tape into this unit.
You can specify the number of programs to be skipped.
• Insert a tape into this unit.
VCR
You can repeat playback of a
whole tape automatically.
• Insert a tape into this unit.
VCR
VCR
VCR
VCR
1
TIME SEARCH
x2 (Twice)
VCR
1
1
INDEX SEARCH
SEARCH
MODE
–:––
SEARCH
MODE
2
Auto Repeat
or
2
INDEX SEARCH
03
or
2
TIME SEARCH
or
01 ~ 20
CURRENT PROGRAM
Beginning
of tape
VCR Functions
Pro.1
0:01~ 9:59
(1 minute~9 hours
and 59 minutes)
02
Pro.2
01
Pro.3
01
End
of tape
Pro.4
02
Pro.5
03
INDEX MARK
3
3
To rewind
To rewind
To fast forward
To fast forward
After searching,
4
PLAYB
AUTO REPEAT B
Hint
After searching,
4
-MENUTIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2:50
3
-MENUTIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
x1 (Once)
Select the desired length of
time for fast forwarding or
rewinding
MENU
––
• To cancel Auto Repeat, follow steps [1]-[2] above.
Then, press the B button, so that [OFF] appears
beside AUTO REPEAT. Press the
CLEAR/C.RESET button to exit.
• If menu remains on the TV screen at step [3],
press the CLEAR/C.RESET button to exit.
PLAYB
Hint
• This unit stores index mark at the beginning of
the recording. There should be time gap between
two index marks for the Index Search.
Hint f or Timer Sear c h & Inde x Sear c h
• These functions are not available during recording.
• Press the STOP button to stop the search.
• If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.
– 14 –
EN
DVD Functions
Playback
Before: Turn on the TV, amplifier and any other components which
are connected to this unit. Make sure the TV and audio receiver
(commercially available) are set to the correct channel.
DVD-V
(
CD
MP3
Hint
POWER
1
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
0
+10
DISPLAY
VCR
DVD
)
⇒p.16
OPEN/CLOSE
/EJECT
SKIP/CH.
1
5
VCR/TV
DVD
SLOW
1
POWER
Remote Control
TV Screen
2
3
4
PLAY
STOP
REC/OTR
2
4
STOP
PLAY
OPEN/CLOSE
POWER
REW
F.FWD
STOP/EJECT
PLAY
VCR
TIMER REC
REC /OTR
OUTPUT
CHANNEL
DVD
DISC IN
SKIP/REV
STOP
PLAY
FWD/SKIP
AUDIO
5
OPEN/CLOSE
/EJECT
1
1
5
DVD menu
DVDs may contain menus to access special features. Press
appropriate Number buttons or use the arrow (K/L/s/B)
buttons to highlight your selection on the DVD main menu
and press the ENTER button to confirm.
4 3
To use the SKIP/REV, FWD/SKIP buttons on the
Main Unit
DVD-V
CD
MP3
Calling up a Menu Screen during Playback
Press once to skip chapters or tracks to a desired point.
Press and hold to change forward or reverse playback
speed.
• Press the MENU button to call up the DVD menu.
• Press the TOP MENU button to call up the title menu.
Fast Forward/Reverse Search
Note
• Menu operations may vary depending on the disc. Refer to
the manual accompanying the disc for details.
Resume
DVD-V
CD
MP3
Press the STOP button. Resume message will appear on
the TV screen.
Press the PLAY button, playback will resume from the
point at which playback was
Press 'PLAY' to play from here.
To play the beginning,
stopped.
press 'STOP' first and then 'PLAY'.
• To cancel resume, press the
STOP button one more time
during the Stop mode.
• For MP3, playback will resume from the beginning of the
track at which playback was stopped.
CD
CD
MP3
Slow Forward/Slow Reverse
DVD-V
Press the g or h button repeatedly dur1
ing the pause mode to select the required forward or reverse speed.
To continue
k, press the PLAY
continue playbac
playback,
PLAY
b utton.
• Slow forward or reverse speed is different depending on
the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).
Paused and Step-by-Step Playback
DVD-V
DVD-V
Press the g or h button repeatedly durE1
ing playback to select the required forward or
reverse speed.
To continue
k, press the PLAY
continue playbac
playback,
PLAY
b utton.
• For DVDs, fast forward or reverse search speed is different
depending on the disc. Approximate speed is
1(x2),2(x8),3(x50),4(x100).
• For Audio CDs, approximate speed is x16.
• For MP3, approximate speed is x8.
MP3
Press the PAUSE button during playback.
To continue
k, press the PLAY
continue playbac
playback,
PLAY
b utton.
Hint
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow playback mode are blurred. (Refer to pages 20-21.)
DVD-V
The disc goes forward by one frame each time the PAUSE
button is pressed during the pause mode.
To continue
k, press the PLAY
continue playbac
playback,
PLAY button.
button.
Hint
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause
mode are blurred. (Refer to pages 20-21.)
– 15 –
EN
DVD Functions
3
OPEN/CLOSE
/EJECT
PAUSE
• When you play an MP3
file, details on page 16.
• A “prohibited icon” may
appear at the
top-right on
the TV
screen when the operation is prohibited by the
disc or this unit.
• Some DVDs may be
played from title 2 or 3
due to specific programs.
• During the playback of a
two-layered disc, pictures may stop for a
moment. This happens
while the 1st layer is
being switched to the
2nd layer. This is not a
malfunction.
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.
2
DVD
MP3
STOP
Insert a MP3-format disc, then press
the MENU button to call up the MP3
menu on the TV screen.
1
Hint
MENU
FILE LIST
FOLDER
MP3
ENTER
PLAY
ENTER
DISC NAME
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
1/2
folder name 1
When selecting the folder:
• Press the B button when you
want to go to the next hierarchy.
• Press the s button when you
want to go back to the previous hierarchy.
• Some selections may take a while to be recognized.
• Press the TOP MENU button to return to the first item.
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by 3 icon.
• Folders are accompanied by
icon.
• A maximum of 255 folders can be recognized.
• A maximum of 512 files can be recognized.
• Up to 8 hierarchies can be created.
This player recommends the files recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 112kbps ~ 320kbps.
The On-Screen Display
You can check the information about the current disc by pressing the DISPLAY button on the remote control.
DVD
DVD
DVD-V
CD
DISPLAY
Current playback status
DISPLAY
4/12 0:03:21 - 0:02:15
T
Remaining time of the current track
Current playback status
11/16 0:00:00 - 0:03:30
Elapsed time of the current track
Remaining time of the current chapter
Elapsed time of the current chapter
DVD Functions
DISPLAY
CH(Chapter):
Current chapter number / Total chapters
4/12 0:13:45 - 0:45:40
1/3
TR(Track):
Current track number / Total tracks
DISPLAY
T
0:00:00 - 1:23:45
Remaining time of the current title
Elapsed time of the current title
DISPLAY
T
TT(Title):
Current title number / Total titles
DISPLAY
L1
DVD
Layer numbers, appears only when playing
a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing
Current repeat setting appears only when
the repeat setting is active
C: Chapter repeat / T: Title repeat /
A B: A-B repeat
DISPLAY
ALL:
Current track number / Total tracks
Current repeat setting appears only when
the repeat setting is active
T: Track repeat
A: All Tracks repeat
A B: A-B repeat
Remaining time of the current audio CD
Elapsed time of the current audio CD
BIT RATE: The amount of audio and video
data currently being read
MP3
DISPLAY
Current playback status
TRACK 01
The name of the file currently in play
will be displayed.
DISPLAY
TR(Track):
Current Track number / Total Tracks
1/36 0:01:15
T
Current Repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
DISPLAY
– 16 –
Elapsed playing time of the current track
EN
Search Function
Track Search
Title / Chapter Search
DVD
DVD
MP3
Using the number buttons
1 1 2 3
4
5
7
8
9
0
+10
DVD
DVD-V
DVD-V
Using the SEARCH MODE button
1
SEARCH
MODE
x1(Press once) for the chapter search
x2 (Press twice) for the title search
2
1
2
5
6
7
8
9
0
+10
/12
3
6
7
8
9
0
+10
3
5
6
7
8
9
TOTAL 1:29:00
• e.g. When you enter 5:55, 0 is automatically entered, so that “0:05:55” is
displayed on the time search screen.
PLAY
/2
Current Chapter
(CH)
Within 30 seconds
Using the SKIP H , G buttons
1
PLAY
Current Track
(TR)
SKIP/CH.
2
4
Within 30 seconds
Using the SKIP H , G buttons
1
5
1
Within 30 seconds
/2
2
x repeatedly until this
screen appears
0
SEARCH
MODE
4
2
3
4
Using the SEARCH MODE button
1
1
TOTAL 1:29:00
/2
•For single digit tracks (1-9), press a
single number (eg. track 3, press 3).
•To play track 26, press +10, 2, 6 of the
Number buttons.
2
PLAY
/12
SEARCH
MODE
6
1
CD
SKIP
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP/CH.
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP
Note
¡Depending on the disc being played,
this function can also be performed by
directly entering the desired chapter
number with the number buttons.
Refer to the manual accompanying
the disc.
Marker Setup
DVD
DVD-V
CD
This feature allows you to assign a specific
point on a disc to be called back later.
To return to the marker
later
1
To set a marker
1
To e xit the marker screen
1
RETURN
PLAY
PLAY
SEARCH
MODE
SEARCH
MODE
x repeatedly until this
screen appears
x repeatedly until this
screen appears
Notes
¡Opening the disc tray or turning off the
power will erase all markers.
¡Selecting “AC” at step [2] in the section “To set a marker” will also erase
all markers.
¡To clear a marker, select the marker to
be cleared at step [2] in the section
“To return to the marker later,” and
then press the CLEAR/C.RESET button.
2
2
or
or
3
3
ENTER
ENTER
at the desired marker
•Playback will restart from the specific point
which you set.
– 17 –
EN
DVD Functions
CD
Time Search
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Programmed Playback
DVD
DVD-V
CD
MP3
DVD
DVD-V
DVD
CD
CD
1
You may determine the order in which
tracks will play.
PLAY
A-
Repeat function is available only during playback.
1
MP3
1
STOP
A-B
CD-DA
TOTAL 0:00:00
CD-DA
TOTAL 0:08:00
PLAY
at your desired starting point (A).
2
REPEAT
2
Each time the REPEAT button is pressed...
CHAPTER (current chapter repeat)
(current title repeat)
OFF
(repeat off)
TRACK
(current track repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
CD
ENTER
DVD Functions
GROUP
(current group repeat)
¡To exit the sequence, press the A-B
PLAY
This shuffles the playing order of tracks
instead of playback in the sequence.
CD
MP3
RANDOM
STOP
CD-DA
moving to another title, chapter, or
track.
¡Repeat playback are not available
with all discs or during repeat A-B
playback.
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
(entire disc repeat)
¡Repeat setting will be cleared when
Up to 99 programs can be
stored.
While a MP3 folder is open:
• For the next hierarchy,
press the B button.
• For the previous hierarchy,
press the s button.
3
1
(repeat off)
ENTER
button.
¡To cancel Point A, press the
CLEAR/C.RESET button.
¡This function does not work in the
other repeat modes.
MODE
OFF
2/2
8 3:30
DVD
(current track repeat)
ALL CLEAR
or track as point A is.
MP3
TRACK
8 3:30
9 2:30
10 1:30
¡Point B should be in the same title
Random Playback
ALL
or
at your desired end point (B).
DVD-V
ENTER
x1 (Press once)
A-B
A-B
TITLE
MODE
PLAY
x2 (Press twice)
2
PLAY
Note
¡If you want to repeat the current
track in the random selections,
press the REPEAT button repeatedly until
TRACK appears during playback. If you want to repeat
the entire random selections,
press the REPEAT button repeatedly until
ALL appears during
playback.
Notes
¡Press the CLEAR/C.RESET button at step [2] to erase the most
recently entered program.
¡To erase all programs at once,
select “ALL CLEAR’’ and press
the ENTER button at step [2].
¡While a program is being played
back, the STOP button works as
follows;
⇒Press the STOP button and the
PLAY button next, so that the programmed playback restarts. (CD
playback restarts from the current
point. MP3 playback restarts from
the beginning of the current track.)
⇒Press the STOP button twice and
the PLAY button next, so that playback restarts from the first track in
the original order. However, your
programmed playback can be
restarted when you follow the above
steps. (Your programs are still
stored until either the disc tray is
open or power is turned off.)
¡To repeat the current track in the
program, press the REPEAT button repeatedly until “
TRACK’’
appears during playback.
¡To repeat the entire program press
the REPEAT button repeatedly until
“ ALL’’ appears during playback.
– 18 –
EN
Special Settings
Subtitle Language
Audio Language
DVD
Stereo Sound mode
DVD
DVD-V
DVD
DVD-V
CD
This unit allows you to select a subtitle
language (if available) during DVD playback.
This unit allows you to select an audio
language (if multiple languages are
available) during DVD playback.
This unit allows you to select a sound
mode during CD playback.
1
1
1
1.ENG/6
PLAY
AUDIO
AUDIO
SUBTITLE
T-SET
Each time you press the SUBTITLE/TSET button, subtitle languages change.
Each time you press the AUDIO button;
For example
For example
(English subtitles)
FRE
(French subtitles)
OFF
(no subtitles)
ENG
(English audio)
SPA
(Spanish audio)
...
...
ENG
FRE
PLAY
1.ENG/6
SUBTITLE
T-SET
2
OFF
Each time you press the AUDIO button;
STEREO (right and left channels
are active)
(left channel is active)
L-CH
(right channel is active)
R-CH
Note
¡If the Virtual Surround setting is “1’’ or
“2’’, the sound mode will be fixed to
STEREO, and can not be changed.
Virtual Surround
DVD
DVD-V
Some DVD discs may contain scenes which have
been shot simultaneously
from various angles. You can change
the camera angle if the (
) icon
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in the Display
menu, the (
) icon will not appear.
(Refer to pages 20-21.)
DVD-V
MP3
You can enjoy stereophonic virtual
world on your existing 2 channel stereo
system.
1
PLAY
OFF
V.SURR
1/8
ANGLE
2
ENTER
Black Level Setting
DVD
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
1
PLAY
1
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
DVD-V
3
RETURN
ON
Note (for CD play back only)
¡Virtual Surround will not be effective if
the sound mode is set to something
other than STEREO.
MODE
2
CD
DVD
1
PLAY
Notes
¡If your language is not shown after
pressing the AUDIO or SUBTITLE/TSET button several times, the disc
may not have that language. However,
some discs allow audio language or
subtitle language setting on the disc
menu. (Operation varies depending
on the discs, so refer to the manual
along with the disc.)
¡When “NOT AVAILABLE” appears on
the TV screen, it means no subtitle is
recorded on the scene.
¡If you choose a language that has a 3
letter language code, the code will be
displayed every time you change the
subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead. (Refer to page 24.)
(French audio)
Camera Angle
To set subtitle ON/OFF
1
STEREO
1.ENG Dolby D 3/2.1ch 48k/3
DVD Functions
PLAY
PLAY
ENTER
OFF
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
3
RETURN
– 19 –
EN
DVD
DVD Set Up
Q UICK SETUP Men u
You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
2
or
SETUP
STOP
Select the desired item
<SETUP MENU>
Confirm that QUICK is selected
ENTER
SETUP
QUICK
SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
QUICK
CUSTOM
INITIALIZE
P20 A (Step 5)
P21 B (Step 5)
P21 C (Step 5)
ENGLISH
4:3 LETTER BOX
ON
ENTER
•Refer to the sections “PLAYER
MENU”, “TV ASPECT”, or “DOLBY
DIGITAL” section on page 20 or 21.
CUSTOM Men u
You can change the DVD player’s settings.
1
2
SETUP
STOP
<SETUP MENU>
3
or
ENTER
or
to decide
To select the desired item
Select CUSTOM
ENTER
SETUP
QUICK
CUSTOM
INITIALIZE
DISPLAY menu
LANGUAGE
SETUP
CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
QUICK
CUSTOM
INITIALIZE
LANGUAGE menu
SETUP
SETUP
SETUP
AUDIO menu
DISPLAY
SETUP
PARENTAL menu
SETUP
AUDIO
PARENTAL
DVD Functions
PASSWORD
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
page 20 A
A
4:3 LETTER BOX
AUTO
ON
ON
DRC
DOWN SAMPLING
DOLBY DIGITAL
page 21 B
ON
ON
ON
Please enter a 4-digit password.
page 21 C
page 22 D
LANGUAGE Setting
Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.
4
5
Select the desired item
or
LANGUAGE menu
SETUP
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTER
Select the desired language
ENTER
6
To exit the menu
or
AUDIO ∗1 ∗2
(Default: ORIGINAL)
Sets the audio language.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language for DVD
menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for the
On-screen display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
– 20 –
SETUP
Hint
∗1
• Language options are not available with
some discs.
• If OTHER is selected on the AUDIO, SUBTITLE or DISC MENU screen, press four-digit
number to enter the code for the desired language. (Refer to the language code list on
page 24.)
• Only the languages supported by the disc
can be selected.
∗2
• Language Setting for Audio and Subtitle is
not available with some discs. Then use the
AUDIO and the SUBTITLE/T-SET button.
Details are on page 19.
EN
B
DISPLAY Setting
You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.
4
Select the desired item
or
5
6 To exit the menu
SETUP
TV ASPECT:
(Default: 4:3 LETTER BOX)
See Hint to the right.
QUICK
Select the
desired
setting
ENTER
TV ASPECT
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
DISPLAY menu
SETUP
DISPLAY
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
4:3 LETTER BOX
AUTO
ON
ON
4:3 LETTERBOX
AUTO
ON
ON
ENTER
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
or
Hint
STILL MODE:
(Default: AUTO)
See Hint to the right.
Select the
desired
setting
ENTER
STILL MODE
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
4:3 LETTERBOX
AUTO
ON
ON
AUTO
FIELD
FRAME
or
ENTER
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
4:3 LETTERBOX
AUTO
ON
ON
4:3 LETTERBOX
AUTO
OFF
ON
ENTER
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars appear on the
top and bottom of the screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides trimmed.
• Select “16:9 WIDE” if a widescreen TV is connected to this
unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, the picture in the still mode will be
stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
35 minutes of no use.
TV ASPECT
STILL MODE
ANGLE ICON
AUTO POWER OFF
4:3 LETTERBOX
AUTO
ON
ON
4:3 LETTERBOX
AUTO
ON
OFF
C
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)
to 3) in the “CUSTOM Menu” section on page 20.
4
Select the desired item
or
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
6 To exit the menu
ON
ON
ON
SETUP
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
AUDIO menu
SETUP
5
ENTER
OFF
ON
ON
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
ENTER
ON
OFF
ON
DOLBY DIGITAL: QUICK
(Default: ON)
Set to “ON” when the unit is connected to a Dolby Digital receiver.
• ON: Outputs a Dolby Digital Signals
• OFF: Convert the Dolby Digital into PCM (2 channel)
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
Hint
DRC:
• This function is available only
on the discs which are recorded in the Dolby Digital format.
DOWN SAMPLING:
• When playing disc with copyright Protection, the sound will
be down sampled at 48kHz,
even if you set to OFF.
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
ON
ON
OFF
ENTER
– 21 –
EN
DVD Functions
ENTER
D
PARENTAL Setting
Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.)
This feature prevents your children from viewing inappropriate materials.
Parental Le vels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.
4
5
Enter your desired fourdigit password (except
for 4737)
1
2
3
4
5
6
7
8
9
6
Select “PARENTAL
LEVEL”
or
SETUP
ENTER
ENTER
PARENTAL LEVEL
CHANGE
To exit
the menu
or
ENTER
0
7
Select the
desired levels
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
ALL
PARENTAL menu
SETUP
PARENTAL
PASSWORD
Please enter a 4-digit password.
Hint
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
• Levels 8:
DVD softwares of any grades (adult/general/children)
can be played back.
• Levels 7 to 2:
Only DVD softwares intended for general use and children can be played back.
• Level 1:
Only DVD softwares intended for children can be played
back, with those intended for adult and general use prohibited.
or
If you have set a password already,
enter the current four-digit
password.
SETUP
PARENTAL
PASSWORD
Enter current password.
To Chang e the Pass w or d f or Parental Controls
You can change your password for parental controls. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.
DVD Functions
4
5
Enter your desired fourdigit password (except
for 4737)
1
2
3
4
5
6
7
8
9
6
Select “CHANGE”
To exit
the menu
SETUP
or
ENTER
PARENTAL LEVEL
CHANGE
7
Enter your new
four-digit password
(except for 4737)
1
2
3
4
5
6
7
8
9
ENTER
ALL
0
0
Hint
PARENTAL menu
SETUP
SETUP
PARENTAL
PASSWORD
Please enter a 4-digit password.
PARENTAL
PASSWORD
Enter current password.
• Record the password in
case you forget it.
• If you forget the password,
press 4, 7, 3, 7 at step 4,
then enter your new password.
• Password will be cleared
and parental levels will be
set to ALL.
To return the All Selections of SET UP (except for PARENTAL) to the Default Setting
2
1
4
3
or
or
To exit
the menu
SETUP
STOP
SETUP
ENTER
ENTER
Select “YES”
Select INITIALIZE
<SETUP MENU>
SETUP
SETUP
SETUP
QUICK
CUSTOM
INITIALIZE
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
– 22 –
INITIALIZE
x2
(twice)
Hint
• When you cancel
to initialize at step
3,select “NO”.
EN
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
PROBLEM
CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to • Check if the power plug is connected to an AC outlet.
the remote control.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the
obstacles between the sensor and the remote.
• You have to be within 23 feet of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press the DVD or
VCR buttons, whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then. If you hear some signal sound from the radio in response to your
pressing buttons on the remote, the remote control is working.
Timer recording is impossible. • Make sure the timer recording is set correctly.
V
• Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTITLE/T-SET button.
C
Make sure the VCR clock is set correctly.
R Cannot go into Record mode. •• Make
sure the tape has a safety tab. If needed, cover the hole with cellophane tape.
• Activate this unit in VCR mode. Press the VCR button on the remote control so that the
green VCR OUTPUT light is lit.
) buttons
Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL (
on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control.
Cannot view a tape but the
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .
audio is OK.
• Make sure the VCR is not in the Menu mode.
No, or poor, playback picture.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be seen
• Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6.
normally.
• Press the VCR/TV button.
• Press the VCR button on the remote control to activate it in the VCR mode. Check if the green
VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.
Video or color fades in and out when • You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
making a copy of a video tape.
Cannot remove the tape.
• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control
to switch the mode.
No picture.
• Connect the video cables firmly.
D
• Insert a correct video disc that plays on this unit.
V
• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then
try other DVD features.
D
• Insert the disc.
Disc cannot be played.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or
dusts on its surface.
• Connect the audio cables firmly.
No sound.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
No DTS audio is output.
• Connect this unit directly to the TV.
Distorted picture.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
• The selected language is not available for audio or subtitles on the DVD.
does not match the set up.
This is not a malfunction.
The camera angle cannot be
• The DVD does not contain sequences recorded from different camera angles.
changed.
This is not a malfunction.
Audio or subtitle language
• The DVD does not contain audio source or subtitles in the selected language.
cannot be changed.
This is not a malfunction.
“Prohibited icon” appears on the • That operation is prohibited by this unit or the disc.
screen, prohibiting an operation This is not a malfunction.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual
for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
– 23 –
EN
Information
D
V
D
V
C
R
Specifications
Video Heads :
Operating temperature :
Four Heads
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between languages, the default language will be
English.
41°F (5°C) to 104°F (40°C)
Output signal format :
Dimensions :
NTSC color
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
W : 17 3/16”(435mm)
H : 3 3/4” (94mm)
D : 9 3/16” (233mm)
Weight :
Power consumption :
Approx 6lbs (2.7kg)
21 W (standby: 3.6W)
Language List
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If
you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
Limited Warranty
Information
FUNAI CORP. will repair this Emerson product, free of charge in the USA in
the event of defect in materials or workmanship as follows:
DURATION:
FUNAI CORP. will provide parts to replace defective parts
PARTS:
without charge for one (1) year from the date of original retail
purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL
RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This Emerson Limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship
which occurs during normal use. It does not cover damage which occurs in
shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse,
abuse, mishandling, misapplication, alteration, faulty installation, improper
maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF
OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF
ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED
BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED
BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS
VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT
ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest Emerson Authorized Service Center or for general service procedure, please call 1-800-256-2487 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-256-2487
http://www.funai-corp.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
– 24 –
EN
Español
4
Conexiones
Consulte la "Conexión básica del
televisor" en la página delantera
antes de utilizar esta unidad.
Canal de salida RF
Activación de la unidad
por primera vez
5
VCR
VCR
VCR
1
VCR
Si el canal 3 se está utilizando para
una transmisión.
1)Programe su televisor al canal 4.
2)Inserte una cinta pregrabada en esta
unidad.
3)Pulse el botón OUTPUT en el
DVD/VCR para que se encienda la
luz VCR OUTPUT.
• Si aparecen ruidos en la pantalla del
televisor,pulse el botón VCR/TV en
el mando a distancia.
4)Pulse una vez el botón PLAY.
5)Después de unos segundos, pulse el
botón PLAY en el DVD/VCR durante
3 segundos.
• El canal de salida RF cambiará del
canal 3 al canal 4 y podrá ver una
imagen reproducida.
• Cuando no aparezca una imagen en
la pantalla del televisor, repita el
paso (4).
6)Pulse el botón STOP para parar la
reproducción.
-MENU-
MENU
PROGRAMAR
AUTOREPETIR [OFF]
AJUSTE CANAL
B AJUSTE DE RELOJ
SELEC. IDIOMA
1
Encienda el televisor y sintonice al canal 3.
• Si el canal 3 se está utilizando para una transmisión, vea la sección "Canal de salida RF".
2
POWER
Mando a distancia
• Si no se ha ajustado el reloj,
aparece la pantalla AJUSTE
DE RELOJ cuando pulse el
botón MENU. En este caso,
vaya al paso (2).
o
Pantalla del televisor
2
SELEC. IDIOMA
AJUSTE DE RELOJ
ENGLISH
o
o
FRANCAIS
B ESPAÑOL
[ON]
3
3
CA 01
✄
Conecta el cable de la caja de canales de cable o la
caja de satélite en la toma ANT IN de DVD/VCR?
AJUSTE DE RELOJ
o
Si
Conmutación VCR/DVD
OPEN/CLOSE
POWER
POWER
REW
F.FWD
STOP/EJECT
PLAY
TIMER REC
REC /OTR
VCR
OUTPUT
CHANNEL
DVD
DISC IN
SKIP/REV
STOP
PLAY
SPEED
AUDIO
1
2
3
4
5
6
OPEN/CLOSE
/EJECT
FWD/SKIP
AUDIO
4
VCR/TV
7
8
0
+10
DISPLAY
VCR
DVD
9
SLOW
PAUSE
Botón DVD
VCR
OUTPUT
DVD
PLAY
SKI
STOP
REC/OTR
Luz
DVD OUTPUT
Botón OUTPUT
AÑO
––––
AM/PM
––
AJUSTE DE RELOJ
o
Pulse el botón
MENU para salir.
MES
DIA
03 / 15
HORA MINUTO
–– : ––
NO
No
Espere unos minutos.
Después del escaneo
AÑO
2004
AM/PM
––
Seleccione el año actual
5
AJUSTE DE RELOJ
SKIP/CH.
Botón VCR
MES
DIA
03 / 15
HORA MINUTO
–– : ––
SI
3
AM/PM
––
Seleccione el día actual
3
2
AÑO
––––
Seleccione el mes actual
Instalación de las pilas
del mando a distancia
1
MES
DIA
03 / ––
HORA MINUTO
–– : ––
AJUSTE AUTO
2
VIDEO
Ajuste del reloj
• El sintonizador se detiene en el canal
memorizado más abajo.
• Puede seleccionar sólo los canales memorizados en esta unidad con los botones
CANAL.
o
MES
DIA
AÑO
0 3 / 1 5 LUN 2 0 0 4
HORA MINUTO
05 : ––
AM/PM
––
Seleccione la hora actual
ENTER
MENU
RETURN
SETUP
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
6
Luz
VCR OUTPUT
AJUSTE DE RELOJ
o
MES
DIA
AÑO
0 3 / 1 5 LUN 2 0 0 4
HORA MINUTO
05 : 40
MODO VCR
AM/PM
––
Seleccione los minutos actuales
Pulse el botón VCR en el mando a distancia.
(Compruebe que está encendida la luz
VCR OUTPUT.)
7
MODO DVD
Pulse el botón DVD en el mando a distancia
(Compruebe que está encendida la luz
DVD OUTPUT.)
AJUSTE DE RELOJ
o
MES
DIA
AÑO
0 3 / 1 5 LUN 2 0 0 4
HORA MINUTO
05 : 40
AM/PM
P M AM
B PM
Seleccione "AM" o "PM".
Nota
• Si pulsa sólo el botón OUTPUT en el
panel frontal NO conmuta el modo del
mando a distancia. DEBE seleccionar
también el modo correcto en el
mando a distancia.
8
– 25 –
Para salir de la pantalla AJUSTE DE
RELOJ.
ES
Español
1
Español
6 Reproducción de la grabadora de vídeo 7 Reproducción de DVD/CD
Antes: Encienda el televisor y cambie al canal 3.
Antes: Encienda el televisor, amplificador y otros equipos que puedan estar
conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de
audio (de venta en los comercios) están en el canal correcto.
• Si el canal 3 se está utilizando para una transmisión, vea la
sección "Canal de salida RF".
DVD
VCR
4
VCR
1
2
Mando a distancia
POWER
Pantalla del televisor
REPRODUCIR B
PLAY
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
OPEN/CLOSE
/EJECT
DVD-V
1
CD
OPEN/CLOSE
/EJECT
POWER
2
1
POWER
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
0
+10
DISPLAY
VCR
DVD
SKIP/CH.
SKIP/CH.
VCR/TV
4
PARAR
STOP
DISPLAY
0
+10
VCR
DVD
Mando a distancia
Pantalla del televisor
4
SLOW
PAUSE
PLAY
EXPULSAR A
STOP
REC/OTR
PLAY
3
STOP
5
OPEN/CLOSE
/EJECT
2
8
PAUSE
STOP
PLAY
OPEN/CLOSE
/EJECT
1
5
VCR/TV
3
SLOW
3
OPEN/CLOSE
/EJECT
REC/OTR
3
4
Mando a distancia
Modo DVD
Modo de grabadora de vídeo
Disco/cinta
Botón
(Orden alfabético)
1
2
3
4
5
7
8
9
0
+10
6
• Para seleccionar directamente
el capítulo o el título.
• Para seleccionar directamente
la canción.
• Para buscar en avance/retroceso
en un disco.
• Para buscar en avance/
• Para empezar la reproducción en avance/
retroceso en un disco.
retroceso lento durante el modo de pausa.
ENTER
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
OPEN/CLOSE
/EJECT
SKIP/CH.
VCR/TV
• Para mover el curso y
determinar su posición.
• Para repetir entre los puntos A
y B elegidos (disco compacto)
0
+10
VCR
DVD
A-B
• Para repetir entre los puntos
A y B elegidos
• Para seleccionar los ángulos
de la cámara en un disco.
AUDIO
• Para seleccionar el idioma de • Para seleccionar ESTÉREO,
audio en un disco.
L-CH o R-CH (disco compacto)
CLEAR/
C. RESET
• Para borrar los marcadores.
• Para borrar los números
entrados incorrectamente.
• Para borrar los marcadores.
(Disco compacto)
• Para retirar el Nº de estado
en la entrada de programa.
• Para borrar los números
entrados incorrectamente.
• Para salir del menú de la
grabadora de vídeo.
• Para reponer el contador de
cinta.
• Para indicar el modo de
disco actual.
• Para indicar el modo de
disco actual.
• Para indicar la hora actual,
contador de cinta y canal.
• Para seleccionar el modo
de salida de DVD.
• Para activar el mando a
distancia en el modo DVD.
• Para seleccionar el modo de
salida de DVD
• Para activar el mando a
distancia en el modo DVD
PAUSE
DISPLAY
PLAY
DVD
STOP
REC/OTR
MENU
MENU
ENTER
MODE
SETUP
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
• Para seleccionar un ítem
en el menú de la grabadora
de vídeo.
• Para avanzar al siguiente
menú de la grabadora de
vídeo.
• Para volver un paso
durante el ajuste del reloj y
temporizador.
ANGLE
SLOW
DISPLAY
• Para el avance/retroceso
de una cinta.
RETURN
OPEN/CLOSE
/EJECT
PAUSE
PLAY
POWER
• Para llamar el menu en un
disco.
• Para llamar el menú MP3
(MP3)
• Para activar/desactivar el
nivel del negro.
• Para disponer el orden de
reproducción o la
reproducción aleatoria.
RETURN
SEARCH
MODE
SETUP
SKIP/CH.
SKIP/CH.
• Para abrir o cerrar la bandeja • Para abrir o cerrar la bandeja • Para expulsar el videocasete
del disco.
del disco.
de la grabadora de vídeo.
• Para hacer una pausa de la
reproducción o grabación de la cinta.
• Para avanzar la reproducción
un cuadro a la vez.
• Para empezar la reproducción
de la cinta.
• Para activar o desactivar la
unidad.
• Para activar o desactivar la
unidad.
• Para activar o desactivar la
unidad.
• Para empezar una grabaciòn.
• Para reproducir repetidamente una
canción o disco (Disco compacto)
• Para reproducir repetidamente una
canción, grupo o disco (MP3).
• Para volver a la operación
• Para volver a la operación
previa en el menú de
previa en el menú de
programación de DVD.
programación de DVD.
• Para buscar una canción.
• Para buscar un capítulo, título u hora. • Para buscar la hora (Disco compacto)
• Para llamar el menú de
• Para volver rápidamente a un
• Para volver rápidamente a un lugar
búsqueda de índice u hora.
lugar o disco.
o disco.
• Buscar los marcadores.
• Buscar los marcadores. (Disco compacto)
• Para reproducir repetidamente
un capítulo o título.
• Para llamar el menú de
programación de DVD.
• Para llamar el menú de
programación de DVD.
• Para saltar capítulos
• Para saltar canciones.
SLOW
Español
SUBTITLE
T-SET
TOP MENU
• Para cambiar de canal.
• Para ajustar manualmente el
seguimiento durante la reproducción.
• Para ver la cinta en cámara
lenta.
SPEED
STOP
• Para llamar el menú de la
grabadora de vídeo.
• Para hacer una pausa de
reproducción del disco.
• Para hacer una pausa en la
• Para avanzar la reproducción
reproducción del disco.
un cuadro a la vez.
• Para empezar la reproducción • Para empezar la reproducción
del disco.
del disco.
REC/OTR
REPEAT
✄
POWER
• Para mover el cursor y
determinar su posición.
• Para seleccionar el canal.
• El botón +10 no tiene efecto
en el modo de grabadora de
vídeo.
• Para seleccionar la velocidad
de grabación.
• Para parar la grabación.
• Para parar la grabación.
• Para parar la reproducción o
grabación.
• Para poner la grabadora de
vídeo en el modo de espera
para una grabación con temporizador.
• Para seleccionar subtítulos
en un disco.
• Para volver al archivo superior
• Para llamar el menú superior
de la jerarquía más alta en el
en un disco.
programa y menú MP3. (MP3)
• Para seleccionar el modo de
salida de la grabadora de vídeo.
• Para activar el mando a distancia
en el modo de la grabadora de vídeo.
VCR
VCR/TV
• Para seleccionar la posición
de DVD o posición del televisor.
• Para seleccionar la posición de
• Para seleccionar la posición de la
CD/MP3 o la posición del televisor.
grabadora de vídeo o posición del televisor.
V.SURR
• Para activar/desactivar el
envolvente virtual.
• Para activar/desactivar el
envolvente virtual.
– 26 –
ES
Quick Use Guide
1
4
Connections
Please refer to “Basic TV
Connection” on the front page
before you use this unit.
RF Output Channel
VCR
1
1
Turn on the TV and set it
to channel 3.
• If channel 3 is already occupied for broadcasting,
see“RF Output Channel” section.
2
POWER
Remote Control
or
LANGUAGE SELECT
2
or
FRANCAIS
ESPAÑOL
✄
POWER
STOP/EJECT
PLAY
TIMER REC
REC /OTR
3
3
CH 01
VCR
OUTPUT
CHANNEL
or
4
AM/PM
––
MONTH DAY
03 / 15
YEAR
––––
HOUR MINUTE
–– : ––
AM/PM
––
DVD
DISC IN
SKIP/REV
STOP
PLAY
OPEN/CLOSE
/EJECT
AUDIO
SPEED
FWD/SKIP
1
2
3
4
5
6
VCR/TV
7
VCR button
8
9
0
+10
VCR
DVD
SLOW
DISPLAY
PAUSE
DVD button
DVD
PLAY
SKI
STOP
REC/OTR
DVD OUTPUT
light
OUTPUT button
CLOCK SET
or
button to exit
SKIP/CH.
OUTPUT
HOUR MINUTE
–– : ––
CLOCK SET
Yes Press the MENU
AUDIO
VCR
YEAR
––––
Select the current day
OPEN/CLOSE
F.FWD
MONTH DAY
03 / ––
Select the current month
AUTO SET UP
VCR/DVD Switching
REW
CLOCK SET
[ON]
YES
POWER
• If the clock is not set, the
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
TV Screen
B ENGLISH
or
-MENUTIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
Do you connect the cable from the cable box or
the satellite box to the DVD/VCR’s ANT IN jack?
VIDEO
MENU
3
2
3
Clock Set Up
VCR
VCR
Installing the Batteries
for the Remote Control
1
5
VCR
If channel 3 is already occupied for
broadcasting,
1)Set your TV to channel 4.
2)Insert a pre-recorded tape into this
unit.
3)Press the OUTPUT button on the
DVD/VCR so that the VCR OUTPUT
light is lit.
• If noise appears on the TV screen,
press the VCR/TV button on the
remote control.
4)Press the PLAY button once.
5)After a few seconds, press the PLAY
button on the DVD/VCR for 3 seconds.
• The RF output channel will change
to channel 4 from channel 3 and you
will see a playback picture.
• When a picture does not appear on
the TV screen, repeat step [4].
6)Press the STOP button to stop playback.
2
Turn on the unit for the
first time
ENTER
MENU
Please wait for a few minutes.
After scanning...
5
• The tuner stops on the lowest memorized
channel.
• You can select only the channels memorized in this unit by using the CHANNEL
buttons.
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
ANGLE
REPEAT
A-B
VCR OUTPUT
light
HOUR MINUTE
–– : ––
AM/PM
––
CLOCK SET
or
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
05 : ––
AM/PM
––
Select the current hour
RETURN
SETUP
SUBTITLE
T-SET
YEAR
2004
Select the current year
NO
No
MONTH DAY
03 / 15
6
CLOCK SET
or
VCR MODE
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
05 : 40
Press the VCR button on the remote
control.
(Verify that the VCR OUTPUT light is lit.)
AM/PM
––
Select the current minute
DVD MODE
7
Press the DVD button on the remote
control.
(Verify that the DVD OUTPUT light is lit.)
CLOCK SET
or
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
05 : 40
Note
AM/PM
P M AM
B PM
Select “AM” or “PM”
• Pressing only the OUTPUT button on
the front panel DOES NOT switch the
mode of the remote control. You
MUST select the correct mode on the
remote control.
8
– 27 –
To exit the CLOCK SET
screen.
EN
Quick Use Guide
7
VCR Playback
Before: Turn on the TV and set it to channel 3.
DVD/CD Playback
Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel.
• If channel 3 is already occupied for broadcasting, see “RF
Output Channel” section.
DVD
VCR
4
VCR
1
2
Remote Control
PLAY
POWER
TV Screen
PLAYB
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
OPEN/CLOSE
/EJECT
DVD-V
1
CD
OPEN/CLOSE
/EJECT
POWER
2
POWER
1
SPEED
AUDIO
1
2
3
4
5
6
7
8
9
0
+10
DISPLAY
VCR
DVD
SKIP/CH.
SKIP/CH.
VCR/TV
4
STOP
STOP
OPEN/CLOSE
/EJECT
DISPLAY
0
+10
VCR
DVD
Remote Control
TV Screen
4
SLOW
PAUSE
PLAY
STOP
REC/OTR
PLAY
3
STOP
5
REC/OTR
OPEN/CLOSE
/EJECT
2
8
PAUSE
STOP
PLAY
EJECT A
1
5
VCR/TV
3
SLOW
3
OPEN/CLOSE
/EJECT
3
4
Remote Control
VCR mode
DVD mode
Disc/Tape
Button
(Alphabetical order)
1
2
3
4
5
6
7
8
9
0
+10
DVD-V
• To select chapter or title directly.
CD
VCR
MP3
• To select channel.
• The +10 button has no effect
in VCR mode.
• To select track directly.
• To search forward/backward
through a disc.
• To search forward/backward
• To begin slow forward/reverse
through a disc.
playback during the pause mode.
ENTER
POWER
OPEN/CLOSE
/EJECT
AUDIO
SPEED
A-B
1
2
3
4
5
6
7
8
9
ANGLE
AUDIO
SLOW
0
+10
DVD
CLEAR/
C. RESET
PAUSE
DISPLAY
PLAY
DVD
STOP
REC/OTR
MENU
MENU
MODE
ENTER
SETUP
TOP MENU
MODE
V.SURR
SEARCH
MODE
CLEAR/
C. RESET
SUBTITLE
T-SET
ANGLE
REPEAT
A-B
RETURN
• To repeat between your
chosen point A and B.
• To repeat between your
chosen point A and B. (CD)
• To select an item
on the VCR Menu.
• To advance to the next
VCR Menu.
• To go back one step during
clock and timer setting.
• To select audio languages on • To select STEREO,
a disc.
L-CH or R-CH. (CD)
VCR/TV
VCR
• To move the cursor and
determine its position.
• To select camera angles on
a disc.
SKIP/CH.
DISPLAY
• To move the cursor and
determine its position.
• To forward/backward a tape.
OPEN/CLOSE
/EJECT
PAUSE
PLAY
• To clear the markers.
• To clear the numbers
entered incorrectly.
• To clear the markers. (CD)
• To remove status No.
in program input.
• To clear the numbers
entered incorrectly.
• To exit the VCR Menu.
• To reset the tape counter.
• To display the current disc
• To display the current disc
• To display the current time,
mode.
mode.
tape counter, and channel.
• To select the DVD output
• To select the DVD output
mode.
mode.
• To activate the remote control • To activate the remote control
in DVD mode.
in DVD mode.
• To call up the Menu
on a disc.
• To call up the MP3 menu.
(MP3)
• To set black level on/off.
• To arrange the playing
order or play randomly.
• To open or close the disc
tray.
• To open or close the disc
tray.
• To eject the video cassette
from the VCR.
• To pause disc playback.
• To advance playback
one frame at a time.
• To pause disc playback.
• To pause tape playback or
recording.
• To advance playback
one frame at a time.
• To begin disc playback.
• To begin disc playback.
• To begin tape playback.
• To turn the unit on or off.
• To turn the unit on or off.
• To call up the VCR Menu.
POWER
• To turn the unit on or off.
REC/OTR
REPEAT
RETURN
SEARCH
MODE
SETUP
SKIP/CH.
SKIP/CH.
• To start a recording.
• To play a track or disc
repeatedly. (CD)
• To play a track, group or disc
repeatedly. (MP3)
• To return to the previous
• To return to the previous
operation on the DVD setup
operation on the DVD setup
menu.
menu.
• To search track.
• To search chapter, title or time. • To search time. (CD)
• To rapidly return to
• To rapidly return to
a location of disc.
a location of disc.
• Search the markers.
• Search the markers. (CD)
• To play a chapter or title
repeatedly.
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To skip chapters.
• To skip tracks.
• To change channels.
• To adjust the tracking manually
during playback.
SLOW
• To view the tape
in slow motion.
SPEED
STOP
SUBTITLE
T-SET
TOP MENU
• To select the recording speed.
• To stop playback.
• To stop playback.
• To stop playback or recording.
• To put the VCR into standby
mode for a timer recording.
• To select subtitles on a disc.
• To call up the Top Menu
on a disc.
• To return to the top file of the
highest hierarchy in the program
and MP3 menu. (MP3)
• To select the VCR output
mode.
• To activate the remote control
in VCR mode.
VCR
VCR/TV
V.SURR
Printed in China
• To call up the index or time
search menu.
• To select DVD position or
TV position.
• To select CD/MP3 position
or TV position.
• To select VCR position or
TV position.
• To set virtual surround on/off. • To set virtual surround on/off.
0VMN04085 / H9610UD ★★★★
✄
6