E61S0UD_ENSP.qx33
05.1.31 13:12
Page 1
Owner’s Manual
Please read before using this unit.
EMERSON AND THE G-CLEF LOGO ARE
REGISTERED TRADEMARKS OF
EMERSON RADIO CORP., PARSIPPANY,
NEW JERSEY, U.S.A.
DVD/CD Player
EWD70V5
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
label
Setup
■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RF Modulator Connection . . . . . . . . . . . . . . . . . . . . . . .
Connection to an Audio System . . . . . . . . . . . . . . . . . . .
Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ About the Remote Control . . . . . . . . . . . . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Batteries for the Remote Control . . . . . . . .
a disc with the label facing up.
Vertical installation (standing position):
1) Attach the Foot to the bottom of the Stand.
Foot
Stand
(supplied)
(supplied)
2)Place the unit as its dent matches the catch of
the Stand. Position the unit as [POWER] comes
on the upper side.
■
■
■
■
■
■
■
■
Catch
lab
el
Front
Stand
Hint
• Insert
6
6
6
7
7
8
8
8
Functions
Hint
• Insert
2
3
4
4
4
4
4
4
4
5
5
5
a disc with its label facing to the left.
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-256-2487
or visit our web site at http://www.EmersonAudioVideo.com
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MP3/WMA Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 10
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 11
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Repeat / Random / Programmed Playback . . . . . . . . 12
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Repeat A-B Playback. . . . . . . . . . . . . . . . . . . . . . . . . . 12
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programmed Playback. . . . . . . . . . . . . . . . . . . . . . . . . 12
Special Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LANGUAGE Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reset to the Default Setting
(Except for PARENTAL Setting) . . . . . . . . . . . . . . . . . . 17
Information
■
■
■
■
Troubleshooting Guide
Specifications . . . . . . .
Language List . . . . . . .
Limited Warranty . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
17
18
18
18
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Setup
Foot
(supplied)
Bottom of the unit
2)Place the unit as [POWER] comes on your right.
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . .
Supplied Accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avoid the Hazards of Electrical Shock and Fire . . . . . . .
Moisture Condensation Warning . . . . . . . . . . . . . . . . . .
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ About the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functions
Horizontal installation (laying position):
1)Attach the Foot to the bottom of the unit.
Precautions
Information
You can install this unit horizontally or vertically.
Precautions
Table of Contents
Español
Setting the Main Unit
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 2
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
Precautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification
is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the bottom of this unit and enter below the Serial No. Retain this information for
future reference.
Model No. _____________________
Serial No. _____________________
–2–
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 3
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended
by the manufacturer.
9) A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
overturn.
10) Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
11) Power Sources - This product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
14) Lightning - For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the product due to
lightning and power-line surges.
15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18) Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions
as an improper adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore the product
to its normal operation,
e) If the product has been dropped or damaged in any
way.
f ) When the product exhibits a distinct change in performance - this indicates a need for service.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–3–
EN
Precautions
IMPORTANT SAFEGUARDS
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 4
Supplied Accessory
Symbols Used in This Manual
• Remote control
• Audio/Video cables
(NB071UD) with two AA
(WPZ0102TM015/
batteries
WPZ0102LTE01/
WPZ0102CAB01)
The following symbols appear in some headings in this manual.
DVD-V
: Description refers to playback of DVD-Video discs.
CD
Precautions
: Description refers to playback of Audio CDs.
• Owner’s Manual • Foot
(1VMN20420)
(1VM421328)
• Stand
(1VM220356)
MP3
: Description refers to playback of MP3 files.
WMA
Owner's Manual
: Description refers to playback of discs formated
with WMA.
Maintenance
Installation Location
For safety and optimum performance of this unit:
• Do not place anything directly on top of the unit. Do
not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid
places. Avoid places with insufficient ventilation for
proper heat dissipation. Avoid locations subject to
strong vibration or strong magnetic fields.
• Be sure to remove the disc and unplug the AC
power cord from the output before carrying the unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection
technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
SERVICING
¡Please refer to relevant topics on the “Troubleshooting
Guide” on page 17 before returning the product.
¡If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog records.
CLEANING THE DISC LENS
¡If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
¡When you handle a disc hold it by its edge and try not
to touch the surface of the disc.
¡Always store a disc in its protective case when it is
not used.
¡If the disc’s peripheral edge is rough, rub it with pen or
pencil stem in order to fine the rough completely. If not,
the disc may not be inserted correctly, or the plastic fragments may stick on the disc and cause skips of playback.
“WMA” (Windows Media Audio) is a new audio codec developed by Microsoft® in the United States of
America.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
–4–
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 5
About the Discs
Playable Discs
Playable
discs
Mark (logo)
DVD-Video
Region code
Recorded
signals
Disc size
Digital video
(MPEG2)
12 cm
Disc types
or
DVD-RW
DVD-R
-
* 1, 3, 4, 5,
6, 7, 9, 10
DVD+RW
DVD+R
* 1, 3, 4,
5, 6, 8
Audio CD
Example
Title 1
Precautions
* 1, 2, 4, 6
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
-
-
Audio CD
Digital audio
Example
* 4, 6
Track 1
CD-RW
CD-R
* 4, 5, 6,
9, 10
-
Digital audio
or
MP3/WMA
Track 2
Track 3
Track 4
Track 5
Track 4
Track 5
Track 6
12 cm
MP3/WMA Example
Track 1
Group 1
Track 2
Track 3
Group 2
Track 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all or
normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with the
DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55 mm across), it may not play
back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it
correctly.
•
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
• This unit is not compatible with Multiple Bit Rate (MBP: a file that contains the same content encoded at several different
bit rates).
Unplayable Discs
¡ NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM /CD-I/Photo CD/Video CD / DVD with region codes other than 1 or ALL
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
• Never insert a disc which is broken or whose form is abnormal (other than 12 cm round disc).
¡ On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡ Any other discs without compatibility indications.
–5–
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 6
Setup
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions.
Connection to a TV
Basic Audio
TV
Method 1
Method 2
Good picture
Better picture
AUDIO IN
L
VIDEO IN
R
S-VIDEO IN
(INPUT)
Video
cable
(supplied)
Audio cable
(supplied)
S-Video
cable
(commercially
available)
or
(OUTPUT)
VIDEO
OUT
VIDEO
OUT
S-VIDEO
OUT
L
AUDIO OUT
R
L
R
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL
Setup
This unit
S-VIDEO
OUT
(Analog)
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
RF Modulator Connection
Cable
Signal
Antenna
(Back of this unit)
(Back of TV)
VIDEO
AUDIO
R
L
1
2
3
S-VIDEO
OUT
Audio/Video
Cables
(Supplied)
VIDEO
OUT
TO TV
L
CHANNEL
3
4
R
AC 120V ANT IN
AUDIO OUT
Stereo Audio/Video RF Modulator
(commercially available)
DIGITAL
AUDIO OUT
COAXIAL
If your TV has Antenna in jack only, it is still possible to
connect this unit to your TV by using a STEREO
AUDIO/VIDEO RF Modulator (commercially available).
In this case, follow the instructions below.
1) Connect the AUDIO/VIDEO output jacks of this unit to the
AUDIO/VIDEO input jacks of your RF Modulator by audio
and video cables.
2) The antenna input jack of your TV may have been already
occupied. If so, disconnect the RF cable from your TV, and
then connect the RF cable to your RF Modulator (usually
marked “ANT IN”).
3) Connect your RF modulator to your TV by another RF cable.
4) Set your RF modulator’s channel 3/4 switch to either 3 or
4, whichever the TV channel is least used in your area. If
your RF modulator has a Modulator/Antenna switch, set it
according to your RF modulator’s manual.
5) Turn on your TV and choose the same channel as you set
the RF modulator’s channel 3/4 switch to.For more details,
follow the instructions supplied with the RF Modulator.
RF Cable (Not supplied)
Antenna in jack
Hint
• The quality of picture may become poor if the unit is con-
nected to an RF Modulator.
After you have completed connections
• Hit the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually
near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS (Example)
• Listed below are inputs for common brand name TV’s.
Admiral:
AUX
Curtis Mathis:
LINE1, LINE2, 00, 90, 91, 92, 93
GE:
INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi:
INPUT, AUX
JVC:
A/V CHANNEL, INPUT1, SVIDEO,
INPUT2
Kenwood:
AUX
LXI-Series:
00
Magnavox:
AUX CHANNEL
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
–6–
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 7
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Analog audio
input jacks
AUDIO
L
Digital audio
input jack
COAXIAL
R
(Analog)
AUDIO OUT
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL
This unit
Setup
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
L
AUDIO OUT
R
SETUP > AUDIO menu >
Setting
Connection
DOLBY DIGITAL
Connecting to Stereo System.
PCM
* To complete these settings, refer to pages 14-15.
SETUP > AUDIO menu >
Setting
Connection
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
BITSTREAM
for Dolby Digital audio output.
Connecting to the other equipment (an MD deck or
PCM
DAT deck etc.) without Dolby Digital decoder.
Hint
* To complete these settings, refer to pages 14-15.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or
DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Rear Terminals
L
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL
R
AUDIO OUT jacks
Connect the supplied audio cable
(red/white) here through the audio in
jacks of a TV or other audio equipment.
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio
cable here through the coaxial digital
audio in jack of a decoder or audio
receiver.
VIDEO OUT jack
Connect the supplied video cable (yellow) here through the TV’s video in jack.
VIDEO
OUT
S-VIDEO
OUT
S-VIDEO OUT jack
Connect an optional S-Video cable here
through the S-video in jack of a TV.
–7–
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 8
About the Remote Control
Remote Control
Disc
Button
DVD-V
(Alphabetical order)
POWER
EJECT
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
0
+10
AUDIO
CD
MP3
WMA
• To select chapter or title
directly.
• To select track directly.
ENTER
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
A-B
• To repeat between your
chosen point A and B.
• To repeat between your
chosen point A and B. (CD)
SUBTITLE
ANGLE
REPEAT
CLEAR
A-B
PAUSE
0
+10
SKIP
SLOW
PLAY
REV
ANGLE
• To select camera angles on
a disc.
AUDIO
• To select audio languages on • To select STEREO,
a disc.
L-ch or R-ch. (CD)
• To clear the markers. (CD)
• To clear the markers.
• To remove status number
in program input.
• To clear the numbers
• To clear the numbers
entered incorrectly.
entered incorrectly.
• To cancel the point for A-B
• To cancel the point for A-B
repeat.
repeat. (CD)
FWD
STOP
SETUP
MODE
ZOOM
TOP MENU
MENU
ENTER
RETURN
CLEAR
Setup
DISPLAY
• To display the current disc
mode.
• To display the current disc
mode.
• Hit to remove the disc.
• Hit to remove the disc.
• To search forward/backward
through a disc.
• To begin slow forward
/reverse playback during
the pause mode.
• To search forward/backward
through a disc.
• To call up the Menu
on a disc.
• To call up the file list.
(MP3/WMA)
EJECT
Installing the Batteries
for the Remote Control
REV
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
1
FWD
MENU
MODE
• To arrange the playing
• To set black level on/off.
• To set virtual surround on/off. order or play randomly.
• To set virtual surround on/off.
• To pause disc playback.
• To advance playback
one frame at a time.
• To pause disc playback.
• To begin disc playback.
• To begin disc playback.
• To turn the unit on or off.
• To turn the unit on or off.
REPEAT
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly. (CD)
• To play a track, group or disc
repeatedly. (MP3/WMA)
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
PAUSE
2
PLAY
POWER
3
Keep in mind the following when using the
remote control:
• Make sure that there is no
obstacle between the
remote control and the
remote sensor on the unit.
• The maximum operable
ranges from the unit are
as follows.
- Beeline: approx. 23
feet (7m)
- Either side of the center:
approx. 16 feet (5m)
within 30°
- Above: approx. 16 feet
(5m) within 15°
- Below: approx. 10 feet
(3m) within 30°
SEARCH
MODE
POWER
STOP
C
• To search track.
• To search chapter, title or time. • To search time. (CD)
• To set or search the
• To set or search the
markers.
markers. (CD)
PLAY
B
SETUP
EJECT
A
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To skip chapters.
• To skip tracks.
• To stop playback.
• To stop playback.
SKIP
STOP
SUBTITLE
TOP MENU
ZOOM
• To select subtitles on a disc.
• To call up the Top Menu
on a disc.
• To return to the top file of the
highest hievarcy in the program
and file list. (MP3/WMA)
• To magnify part of a picture.
(x2/x4)
–8–
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 9
Functions
Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Before: Turn on the TV, amplifier and any
other equipments which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
(
MP3
1
CD
WMA
)
POWER
1
C
PLAY
B
EJECT
SEARCH
MODE
1
2
3
4
5
6
7
8
AUDIO
SUBTITLE
ANGLE
Insert a disc with
label facing to the
left.
REPEAT
CLEAR
A-B
PAUSE
9
3
4
To stop
playback
+10
SKIP
SLOW
PLAY
REV
2
FWD
STOP
SETUP
TOP MENU
MODE
4
To start
playback
ZOOM
MENU
ENTER
RETURN
TIP:
You can change the On-Screen language in
“PLAYER MENU” setting. (Refer to page 14.)
STOP
PLAY
DVD menu
Fast Forward/Reverse Search
Some discs contain menus which allow you to customize
K / L / s / B] to select an item, then
DVD playback. Press [K
press [ENTER] (or [PLAY B]), to select.
Calling Up a Menu Screen during Playback
• Hit [MENU] to call up the DVD menu.
• Hit [TOP MENU] to call up the title menu.
DVD-V
WMA
Press [FWD g] or [REV h] repeatedly during playback to select the required forward or
reverse speed.
To continue playback, hit [PLAY B].
E1
• For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).
• For MP3/WMA, approximate speed is 1(x2), 2(x8) and 3(x30).
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Slow Forward/Slow Reverse
CD
MP3
WMA
Hit [STOP C]. Resume message will appear on the TV
screen.
Hit [PLAY B], playback will
resume from the point at which
playback was stopped.
DVD-V
Press [FWD g] or [REV h] repeatedly during the pause mode to select the required forward or reverse speed.
To continue playback, hit [PLAY B].
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the
slow playback mode are blurred. (Refer to pages 14-15.)
Hint
• To cancel resume, hit [STOP C] one more time during the stop
mode.
• For MP3/WMA, playback will resume from the beginning of the
track at which playback was stopped.
• The resume information will be kept even when the power is turned off.
Paused and Step-by-Step Playback
Zoom
DVD-V
Hit [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2
CD
MP3
1
Hint
<Example : DVD>
DVD-V
MP3
CD
Hint
Hint
DVD-V
STOP
EJECT
DISPLAY
0
3
• When you play an MP3/WMA file, details on
page 10.
• A “prohibited icon” may appear at
the top-right on the TV screen when
the operation is prohibited by the
disc or this unit.
• Some DVDs may start playback from title 2 or
3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This happens
while the 1st layer is being switched to the
2nd layer. This is not a malfunction.
• Don't leave the disc exiting halfway from the
slot.
POWER
A
⇒Page 10
2
POWER
Hint
1
4
3
x4
WMA
Hit [PAUSE F] during playback.
To continue playback, hit [PLAY B].
K / L / s / B] to slide the zoomed picture across the
Press [K
screen.
To exit zoom function, hit [ZOOM] repeatedly to select OFF.
DVD-V
The disc goes forward by one frame each time [PAUSE F]
is hit during the pause mode.
To continue playback, hit [PLAY B].
Hint
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause mode are blurred. (Refer to pages 14-15.)
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or
[REV h] repeatedly in the zoom mode.
• It may take several seconds to slide the zoomed picture.
–9–
EN
Functions
DVD-V
Lights up when
power is on.
E61S0UD_ENSP.qx33
05.1.31 13:49
Page 10
MP3/WMA Playback
MP3/WMA is a method of compressing files. You can copy MP3/WMA files on CD-R/RWs from the computer and play the files on this unit.
MP3
2
WMA
STOP
Insert an MP3/WMA-format disc, then hit
[MENU] to call up the file list on the TV screen.
1
MENU
FILE LIST
FOLDER
MP3
WMA
3
DISC NAME
3
3
ENTER
PLAY
ENTER
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
1/ 2
folder name 1
When selecting the folder:
B] when you want to
• Hit [B
go to the next hierarchy.
s] when you want
• Hit [s
to go back to the previous hierarchy (except for
the top hierarchy).
or
PLAY
Refer to “Resume” on page 9.
Hint
• Some selections may take a while to be recognized.
• Hit [TOP MENU] to return to the first item.
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by 3 icon.
• WMA files are accompanied by
icon.
• Folders are accompanied by
icon.
• A maximum of 255 folders can be recognized.
• A maximum of 999 files can be recognized.
• Up to 8 hierarchies can be created.
This player recommends the files recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz (MP3/WMA)
• Constant bit rate: 32kbps ~ 320kbps (MP3). 48kbps ~ 192kbps (WMA).
• For MP3/WMA file recorded in Variable Bit Rate(VBR), the unit may not display the actual elapsed time.
• Copyright protected WMA files will not play on this unit.
On-Screen Display
You can check the information about the current disc by hitting [DISPLAY] on the remote control.
DVD-V
CD
DISPLAY
Angle icon, appears only when available on the DVD
Current playback status
DISPLAY
Functions
1
Current playback status
1
4/12 0:03:21 - 0:02:15
11/16 0:00:00 - 0:03:30
Remaining time of the current chapter
DISPLAY
Elapsed time of the current chapter
CH(Chapter):
Current chapter number / Total chapters
DISPLAY
2
T
1/3
2
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears only
when the repeat setting is active
T: Track repeat
A: All Tracks repeat
A B: A-B repeat
Remaining time of the entire disc
Elapsed time of the entire disc
0:00:00 - 1:23:45
Remaining time of the current title
Elapsed time of the current title
TT(Title):
Current title number / Total titles
DISPLAY
DISPLAY
3
3
T
L1
Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
PROGRAM (or RANDOM) will be displayed instead of 2 .
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat / T: Title repeat /
A B: A-B repeat
DISPLAY
BIT RATE: The amount of audio and
video data currently being read
MP3
WMA
DISPLAY
Current playback status
1
TRACK 01
NOTE: For WMA files, 1-A and 1-B will be displayed
2
1/36 0:01:15
T
after 1 .
TITLE NAME
DISPLAY
1-B
The name of the file currently
in play will be displayed.
DISPLAY
4
1-A
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
ALL:
Current track number / Total tracks
Title name based on tag information currently in play will be
displayed.
DISPLAY
3
TR(Track):
Current track number / Total tracks
Current repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
Elapsed playing time of the current
track
RANDOM
PROGRAM
or
(Only when you are playing a disc in PROGRAM or RANDOM mode.)
ARTIST NAME
Artist name based on tag information currently in play will be
displayed.
– 10 –
DISPLAY
4
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 11
Search Function
Title / Chapter Search
Track Search
CD
MP3
SEARCH
MODE
DVD-V
DVD-V
WMA
Using [SEARCH MODE]
1
Time Search
Using [SEARCH MODE]
1
SEARCH
MODE
CD
1
PLAY
TOTAL 1:29:00
/12
/29
SEARCH
MODE
1
2
3
4
5
6
7
8
9
0
+10
/29
Within 30 seconds.
Hit once for the chapter search.
Hit twice for the title search.
2
• For the disc with less than 10 tracks,
hit the track number directly.
• For discs with more than 10 but less
than 99 tracks, to play single-digit track,
hit [0] first, then the track number (e.g.
for track 3, hit [0], [3]). To play a double-digit track, hit the track number.
• For discs with more than 100 tracks, to
play a single or a double-digit track, hit
[0] first, then the track number (e.g. for
track 3, hit [0], [0], [3], and for track
26, hit [0], [2], [6]). To play a triple-digit
track, hit the track number.
1
2
4
5
7
8
9
0
+10
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP
Hint
• [+10] button can also bring the Track Search
display, except for the disc with less than 10
tracks. For such a disc, track search can be
done by just hitting the track number.
2
3
4
5
6
7
8
9
TOTAL 1:29:00
/12
Within 30 seconds.
Using [SKIP H , G ]
Current Chapter
1
(CH)
PLAY
SKIP
SKIP
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP
or
Current Title
(TT)
Within 30 seconds.
Hint
• When there is no need to enter a number,
“0” appears automatically.
For example, “0 : 0-: --” appears in the
Time Search display if the total time of the
title or track is less than 10 minutes.
• Hit [CLEAR] to erase the incorrect input at
step 2).
TT 1 TT2 TT3 TT4
SKIP
(If the disc has no chapters)
PLAY
Current Track
(TR)
6
1
0
Using [SKIP H , G ]
1
SKIP
2
3
Functions
2
Hit repeatedly until the
Time Search display
appears.
Hint
• Depending on the disc being played, this
function can also be performed by directly
entering the desired chapter number with
the Number buttons. Refer to the manual
accompanying the disc.
• For CDs and MP3/WMA, Track Search is
not available for Programmed or Random
Playback.
Marker Setup
DVD-V
CD
This feature allows you to assign a specific
point on a disc to be called back later.
To return to the marker
later
1
To set a marker
1
To exit the marker display
1
RETURN
PLAY
PLAY
SEARCH
MODE
SEARCH
MODE
Hit repeatedly until the
marker display
appears.
Hit repeatedly until
the marker display
appears.
2
or
2
or
3
ENTER
3
Hint
• The Marker display will disappear in about
30 seconds when there is no output.
• To clear a marker, select the marker to be
cleared at step 2) in the section “To set a
marker” or “To return to the marker later”
and then hit [CLEAR].
• Removing the disc or turning off the power
will erase all markers.
• Selecting “AC” at step 2) in the section “To
set a marker” or “To return to the marker
later” will also erase all markers.
ENTER
at the desired marker
•Playback will restart from the specific point
which you set.
– 11 –
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 12
Repeat / Random / Programmed Playback
Repeat Playback
DVD-V
MP3
Repeat A-B Playback
CD
DVD-V
Programmed Playback
CD
CD
1
WMA
PLAY
Repeat function is available only during
playback.
MP3
WMA
You may determine the order in which
tracks will play.
A-
1
STOP
A-B
1
CD-DA
TOTAL 0:00:00
PLAY
at your desired starting point (A)
2
REPEAT
MODE
Hit once.
A-B
A-B
<Example : CD>
2
Each time you hit [REPEAT], repeat
function changes as example below.
at your desired end point (B)
TOTAL 1:03:30
or
1
5
10
11
12
17
22
• Point B should be in the same title or
DVD-V
CHAPTER (current chapter repeat)
track as point A.
1/4
Hint
TITLE
(current title repeat)
OFF
(repeat off)
TRACK
(current track repeat)
CD
Functions
ALL
(entire disc repeat)
OFF
(repeat off)
WMA
TRACK
GROUP
(current track repeat)
Random Playback
This function shuffles the playing
order of tracks instead of playback
in the sequence.
MP3
OFF
(repeat off)
Hint
• Repeat setting will be cleared when moving to another title, chapter, track or group.
• Repeat playback may not function with
some discs or during repeat A-B playback.
• Up to 99 tracks can be
ordered.
• If eight or more tracks were in a
program, use [SKIP H , G]
to see all the tracks.
• While an MP3/WMA folder
is open:
B] when you want to
–Hit [B
go to the next hierarchy.
s ] when you want to
–Hit [s
go back to the previous
hierarchy (except for the
top hierarchy).
3
1
STOP
RANDOM
CD-DA
TOTAL 0:45:55
PLAY
RANDOM PROGRAM
--no indication--
MODE
(entire disc repeat)
3:30
5:10
4:20
3:00
3:20
4:10
2:50
2/3
WMA
(current group repeat)
ALL
ENTER
• To exit the sequence, hit [A-B] so that
OFF appears.
• To cancel Point A, hit [CLEAR].
• This function does not work in the other
repeat modes.
CD
MP3
ENTER
Hit twice.
PLAY
<Example : CD>
2
Hint
• Hit [CLEAR] at step 2) to erase the most
recently entered track.
• To erase all programmed tracks at once,
select “ALL CLEAR’’ and hit [ENTER] at
step 2).
PLAY
Hint
• To repeat the current track in the random
selections, hit [REPEAT] repeatedly until
“
TRACK” appears during playback.
• To repeat the entire random selections, hit
[REPEAT] repeatedly until “
ALL”
appears during playback.
• While a program is being played back,
[STOP C] works as follows;
⇒Hit [STOP C] and [PLAY B] next, so
that the programmed playback restarts.
(CD playback restarts from the current
point. MP3/WMA playback restarts from
the beginning of the current track.)
⇒Hit [STOP C] twice and [PLAY B] next,
so that playback restarts from the first
track in the original order. However, your
programmed playback can be restarted
when you follow the above steps. (Your
programs are still stored until either the
disc is remove or power is turned off.)
• To repeat the current track in the program,
hit [REPEAT] repeatedly until “
TRACK’’
appears during playback.
• To repeat the entire program, hit [REPEAT]
repeatedly until “
ALL’’ appears during
playback.
– 12 –
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 13
Special Settings
Subtitle Language
Audio Language
2
ENTER
DVD-V
OFF
DVD-V
This unit allows you to select a subtitle
language (if available) during DVD playback.
This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
1
1
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
3
RETURN
PLAY
PLAY
1.ENG/6
1.ENG Dolby D 3/2.1ch 48k/3
Stereo Sound Mode
AUDIO
SUB TITLE
CD
Each time you hit [SUBTITLE], subtitle
language changes as example below.
Each time you hit [AUDIO], audio
language changes as example below.
ENG
(English subtitles)
ENG
(English audio)
FRE
(French subtitles)
SPA
(Spanish audio)
This unit allows you to select a sound
mode during CD playback.
1
PLAY
STEREO
...
...
AUDIO
(no subtitles)
To set subtitle ON/OFF
1
PLAY
1.ENG/6
(French audio)
FRE
Each time you hit [AUDIO], sound
mode changes as example below.
STEREO (right and left channels
are active)
(left channel is active)
L-ch
Hint
• Some discs will only allow you to change
the audio setting from the disc menu. Refer
to the manual accompanying the discs for
details.
(right channel is active)
R-ch
SUB TITLE
Virtual Surround
Camera Angles
2
DVD-V
OFF
Hint
• If your language is not shown after pressing [AUDIO] or [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow audio language
or subtitle language setting on the disc
menu. (Operation varies depending on the
disc, so refer to the manual along with the
disc.)
• When “NOT AVAILABLE” appears on the
TV screen, it means no subtitle is recorded
on the scene.
• If you choose a language that has three-letter-language code, the code will be displayed every time you change the subtitle
language setting. If you choose any other
languages, ‘---’ will be displayed instead.
(Refer to page 18.)
• Some discs will only allow you to change
the subtitle from the disc menu. Refer to the
manual accompanying the discs for details.
Some DVD discs may contain scenes which have been
shot simultaneously from various angles. You can change the camera angle if the (
) icon appears on
the screen. If the “ANGLE ICON” setting is “OFF” in the OTHERS menu, the
(
) icon will not appear. (Refer to
pages 14-16.)
DVD-V
CD
MP3
WMA
You can enjoy stereophonic virtual
world on your existing 2 channel stereo
system.
1
PLAY
1
OFF
MODE
PLAY
1/8
ANGLE
Hit twice
(once for CD and MP3/WMA)
2
ENTER
1
Black Level Setting
1: Natural effect.
2: Emphasized effect.
OFF: No effects (original sound).
DVD-V
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
1
PLAY
3
RETURN
ON
Hint
For CD playback only
MODE
• Virtual Surround will not be effective if the
sound mode is set to something other than
STEREO. Refer to “Stereo Sound Mode”.
– 13 –
EN
Functions
OFF
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 14
DVD Setup
Q UICK SETUP Men u
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
2
SETUP
STOP
or
Select the desired item.
<SETUP MENU>
Confirm that “QUICK” is selected.
ENTER
P14 A Step 5)
P15 B Step 5)
P15 C Step 5)
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
ENGLISH
4:3 LETTER BOX
BITSTREAM
ENTER
ENTER
• Refer to the sections “PLAYER
MENU”, “TV ASPECT” or “DOLBY
DIGITAL” on page 14 or 15.
CUSTOM Men u
You can change the settings of the unit.
• QUICK on pages 14-16 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
1
2
SETUP
STOP
<SETUP MENU>
3
or
ENTER
or
Select the desired item.
Select “CUSTOM”.
ENTER
Functions
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
QUICK SETUP
ENGLISH
4:3 LETTER BOX
BITSTREAM
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
OK
ENTER
OK
LANGUAGE menu
DISPLAY menu
AUDIO menu
4:3 LETTER BOX
AUTO
page 14 A
OTHERS menu
OTHERS
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
PARENTAL LEVEL
ANGLE ICON
ON
AUTO POWER OFF ON
ALL
ENTER
ENTER
ENTER
ENTER
PARENTAL menu
AUDIO
DISPLAY
TV ASPECT
STILL MODE
A
ENGLISH
4:3 LETTER BOX
BITSTREAM
page 15 B
page 15 C
ENTER
page 16 D
page 16 E
LANGUAGE Setting
Follow steps 1) to 3) in the “CUSTOM Menu” section above.
4
5
Select the desired item.
Select the desired language.
ENTER
6
To exit the menu.
ENTER
SETUP
or
or
LANGUAGE menu
ENTER
AUDIO ∗1 ∗2
(Default: ORIGINAL)
Sets the audio language.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in DVD
menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
– 14 –
Hint
∗1
• Language options are not available
with some discs.
• If OTHER is selected in the AUDIO,
SUBTITLE or DISC MENU screen,
press four-digit number to enter the
code for the desired language. (Refer
to the language code list on page 18.)
• Only the languages supported by the
disc can be selected.
∗2
• Language setting for Audio and
Subtitle are not available with some
discs. Then hit [AUDIO] and
[SUBTITLE]. Details are on page 13.
EN
E61S0UD_ENSP.qx33
B
05.1.31 13:12
Page 15
DISPLAY Setting
You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4
Select the desired item.
5
6 To exit the menu
SETUP
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See Hint to the right.
or
Select the
desired
setting.
ENTER
TV ASPECT
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
DISPLAY menu
or
Hint
ENTER
DISPLAY
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
ENTER
STILL MODE:
(Default: AUTO)
See Hint to the right.
Select the
desired
setting.
STILL MODE
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
AUTO
FIELD
FRAME
ENTER
or
ENTER
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the
screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a widescreen TV is connected to this
unit.
C
AUDIO Setting
Choose the appropriate audio settings for your equipments. It only affects during the playback of DVD discs. Follow steps 1)
to 3) in the “CUSTOM Menu” section on page 14.
4
Select the desired item.
or
AUDIO menu
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
5
6 To exit the menu
SETUP
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM ENTER
OFF
ON
BITSTREAM
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
ON
OFF
BITSTREAM
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled at 48kHz, even if
you set to OFF.
• This function is available
only on digital outputting
of a disc recorded in
96kHz.
ON
ON
PCM
ENTER
– 15 –
EN
Functions
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, the picture in the still mode will be
stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
E61S0UD_ENSP.qx33
D
05.1.31 13:12
Page 16
PARENTAL Setting
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not play.)
This feature prevents your children from viewing inappropriate materials.
Parental Le vels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4
5
Enter your desired fourdigit password (except
for 4737).
1
2
3
4
5
6
7
8
9
6
Select “PARENTAL
LEVEL”.
7
Select the
desired level.
To exit
the menu
SETUP
or
ENTER
or
ENTER
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
PARENTAL LEVEL
ALL
PASSWORD CHANGE
0
ENTER
PARENTAL menu
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
• Level 8:
DVD softwares of any grades (adult/general/children) can be played back.
• Levels 7 to 2: Only DVD softwares intended for general use and children can be played
back.
• Level 1:
Only DVD softwares intended for children can be played back, with those
intended for adult and general use prohibited.
TIPS FOR LEVELS
• 7 [NC-17]:
No one under 17 admitted
• 6 [R]:
Restricted; under 17 requires accompanying parent or adult guardian
• 4 [PG13]:
Unsuitable for children under 13
• 3 [PG]:
Parental Guidance suggested
• 1 [G]:
General Audience
PASSWORD
ENTER
or
If you have set a password already,
enter the current four-digit
password.
Hint
• DVD-Video discs may not respond to the parental lock settings. Make sure this function
works with your DVD-Video discs.
ENTER
Functions
To Chang e the Pass w ord for Parental Controls
You can change your password for parental controls. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4
5
Enter your desired fourdigit password (except
for 4737).
1
2
3
4
5
6
7
8
9
6
Select “PASSWORD
CHANGE”.
7
Enter your new
four-digit password
(except for 4737).
or
ENTER
PARENTAL LEVEL
ALL
PASSWORD CHANGE
1
2
3
4
5
6
7
8
9
SETUP
ENTER
0
0
Hint
• Record the password in
case you forget it.
• If you forget the password, hit [4], [7], [3], [7]
at step 4), then enter your
new password.
• Password will be cleared
and parental levels will be
set to “ALL”.
PARENTAL menu
PASSWORD
ENTER
ENTER
E
To exit
the menu
OTHERS Setting
You can change the other functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4
Select the desired item
or
5
6 To exit the menu
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
OFF
ON
ANGLE ICON
ON
AUTO POWER OFF ON
OTHERS menu
OTHERS
ANGLE ICON
ON
AUTO POWER OFF ON
ENTER
SETUP
ENTER
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
30 minutes of no use.
ANGLE ICON
ON
AUTO POWER OFF ON
ON
OFF
ENTER
– 16 –
EN
E61S0UD_ENSP.qx33
05.2.15 12:51
Page 17
Reset to the Default Setting (Except for PARENTAL Setting)
2
1
4
3
or
SETUP
or
STOP
To exit
the menu
SETUP
ENTER
<SETUP MENU>
ENTER
Select “YES”.
Select “INITIALIZE”.
INITIALIZE
QUICK SETUP
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
Initialize?
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
ENGLISH
4:3 LETTER BOX
BITSTREAM
NO
YES
ENTER
OK
Hit
twice.
Hint
• When you cancel
to initialize at step
3), select “NO”.
Information
Troubleshooting Guide
Problem
Solution
No power
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.
(See Connection to a TV)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Connect the unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
–This unit does not support DTS audio.
This is not a malfunction.
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this unit.
–Handle a disc with special care so that it does not have fingerprints,
scratches, or dusts on its surface.
–Reset the unit by switching the unit off, then on again.
No sound or picture
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
No audio at digital output
No DTS audio is output
Picture freezes momentarily
during playback
Disc can’t be played
No return to start-up screen when
disc is removed
The unit does not respond to
the remote control
Buttons do not work or the unit stops
responding
The unit does not respond to some
operating commands during playback
The unit cannot read
CDs/DVDs
Angle does not switch
Playback does not start when the title is selected
The password for rating level has been forgotten
Disc cannot be inserted
Disc cannot be taken out
–Aim the remote control directly at the sensor on the front of the unit.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises.
Then, turn the volume up. If you hear some signal sound from the radio
by pressing buttons on the remote control, the remote control is working.
–To completely reset the unit, unplug the AC
cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available cleaning CD/DVD to
clean the lens before sending the unit for repair.
–The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for
specific scenes.
–Check the “PARENTAL” setting.
–Enter the default password “4737”, then your forgotten password
will be cleared.
–Check if any disc is already in?
–Press and hold [EJECT A] on the unit for more than 5 seconds.
NOTES:
•
•
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual
for more details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Some functions are prohibited on some discs.
– 17 –
EN
Information
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the following checklist.
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 18
Specifications
Output signal format:
NTSC color
Power source:
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption:
10 W (standby: 0.8 W)
Operating temperature:
41°F (5°C) to 104°F (40°C)
Dimensions:
W : 10"
(255 mm)
H : 2 1/16" (59 mm)
D : 9 9/16" (243.5 mm)
Weight :
Approx 2.8 lbs (1.3 kg)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between languages, the default language will be
English.
Language List
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 13. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
Information
Limited Warranty
FUNAI CORP. will repair this Emerson product, free of charge in the
USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date of
original retail purchase. Certain parts are excluded
from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for
a period of ninety (90) days from the date of original
retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the
product are altered, replaced, defaced, missing or if service was
attempted by an unauthorized service center. This Emerson Limited
warranty does not apply to any product not purchased and used in
the United States.
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product or damage which results from fire, flood,
lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO
FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU
ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF
THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest Emerson Authorized Service Center or for
general service procedure, please call or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-256-2487
http://www.EmersonAudioVideo.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
– 18 –
EN
E61S0UD_ENSP.qx33
05.1.31 13:12
Page 19
Español
4
Conexiones
Si su televisor tiene entradas
de AUDIO/VIDEO vea la
sección “Connection to a TV”
en la página 6 en el Manual de
Manejo. En caso contrario, vea
la sección “RF Modulator
Connection” en la página 6 en
el Manual de Manejo.
Reproducción
Antes.
¡Encienda el televisor, amplificador y
otros equipos conectados a esta
unidad. Asegúrese que el televisor y
el sintonizador de audio (de venta en
los comercios) están en el canal
correcto.
POWER
1
REPEAT
A-B
3
SEARCH
MODE
1
2
4
5
7
8
9
0
+10
3
3
6
Disco
2
3
4
5
6
7
8
9
0
+10
ENTER
✄
OK
DISPLAY
EJECT
FWD
MENU
QUICK SETUP
MODE
OK
PAUSE
ENTER
PLAY
3
o
Seleccione el idioma
deseado para las
indicaciones en la pantalla.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
POWER
REPEAT
RETURN
SETUP
4
Para salir del menú.
• Para mover el cursor y
determinar la posición.
• Para borrar los marcadores.
• Para borrar los números mal
entrados.
• Para borrar el punto para la
repetición A-B.
• Para seleccionar ESTÉREO
L-ch o R-ch. (CD)
• Para borrar los marcadores. (CD)
• Para eliminar el Nº de estado
en la entrada de programa.
• Para borrar los números mal
entrados.
• Para borrar el punto para la
repetición A-B. (CD)
• Para mostrar el modo de
disco actual.
• Para mostrar el modo de
disco actual.
• Presione para ejectar el
disco.
• Presione para ejectar el
disco.
• Para buscar en avance/
retroceso por un disco.
• Para empezar la reproducción
en avance lento/retroceso
durante el modo de pausa.
• Para buscar en avance/
retroceso por un disco.
• Para llamar el Menú en un
disco.
• Para llamar la liseade archivo.
(MP3/WMA)
• Para activar/desactivar el
nivel del negro.
• Para activar/desactivar el
ambiental virtual.
• Para hacer una pausa en la reproducción.
• Para avanzar la reproducción un cuadro
cada vez.
• Para empezar la
reproducción del disco.
• Para disponer el orden de reproducción
o la reproducción aleatoria.
• Para activar/desactivar el
ambiental virtual.
• Para hacer una pausa en la
reproducción del disco.
• Para empezar la
reproducción del disco.
• Para encender o apagar la
unidad.
• Para encender o apagar la
unidad.
• Para reproducir
repetidamente un capítulo o
título.
• Para reproducir repetidamente
una canción o disco. (CD)
• Para reproducir repeticlamenfe una
cancieón, grupo o disco. (MP3/WMA)
• Para volver a la operación
anterior en el menú.
• Para volver a la operación
anterior en el menú.
• Para buscar un capítulo, título • Para buscar una canción.
o tiempo.
• Para buscar el tiempo. (CD)
• Para colocar o buscar los
• Para colocar o buscar los
marcadores.
marcadores. (CD)
SEARCH
MODE
ENTER
WMA
• Para mover el cursor y
determinar la posición.
• Para seleccionar idiomas de
audio en un disco.
REV
MP3
• Para seleccionar
directamente la canción.
AUDIO
SETUP
ENTER
CD
• Para seleccionar
directamente el capítulo o
título.
• Para seleccionar los ángulos
de cámara en un disco.
CLEAR
ENGLISH
4:3 LETTER BOX
BITSTREAM
DVD-V
ANGLE
QUICK SETUP
ENGLISH
4:3 LETTER BOX
BITSTREAM
4
• Para repetir entre su punto A • Para repetir entre su punto A y B
y B seleccionado.
seleccionado. (CD)
A-B
Confirme que ha
seleccionado “QUICK”.
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
STOP
PLAY
FWD
1
POWER
Confirme que ha seleccionado
“PLAYER MENU”.
Para parar la
reproducción
PLAY
STOP
2
4
Control remoto
Para cambiar el idioma
en la pantalla
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
Para empezar
la reproducción
SLOW
(Orden alfabético)
1
Ponga un
disco con la
etiqueta
hacia
izquierda.
SKIP
PAUSE
REV
Botón
3
2
POWER
CLEAR
STOP
5
3
2
1
1
WMA
EJECT
DISPLAY
SUBTITLE
Instalación de las pilas
en el control remoto
MP3
CD
AUDIO
ANGLE
2
DVD-V
SETUP
• Para llamar el menú de
ajustes de DVD.
• Para llamar el menú de
ajustes de DVD.
• Para saltar capítulos.
• Para saltar canciones.
• Para parar la reproducción.
SKIP
STOP
• Para parar la reproducción.
SUBTITLE
• Para seleccionar subtítulos
en un disco.
TOP MENU
• Para llamar el menú inicial
en un disco.
ZOOM
• Para ampliar la imagen de
vídeo en DVD.
– 19 –
• Para volcer al archivo superior de
la jeraraúia más alta en el programa
y en la lista de archivo. (MP3/WMA)
ES
Español
1
E61S0UD_ENSP.qx33
05.2.15 11:51
Page 20
Quick Use Guide
4
Connections
If your TV has AUDIO/VIDEO
input jacks, see the section
“Connection to a TV” on page
6 of the Owner’s Manual. If not,
see the section “RF Modulator
Connection” on page 6 of the
Owner’s Manual.
Playback
Before:
¡Turn on the TV, amplifier and any other
equipments which are connected to this
unit. Make sure the TV and audio receiver (commercially available) are set to the
correct channel.
POWER
1
SEARCH
MODE
1
2
3
4
5
6
7
8
9
REPEAT
CLEAR
A-B
PAUSE
0
3
2
3
4
5
6
7
8
9
0
+10
ENTER
A-B
MP3
WMA
• To select chapter or title
directly.
• To select track directly.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
• To repeat between your
chosen point A and B.
• To repeat between your
chosen point A and B. (CD)
• To select audio languages on • To select STEREO,
a disc.
L-ch or R-ch. (CD)
• To clear the markers. (CD)
• To clear the markers.
• To remove status number
in program input.
• To clear the numbers
• To clear the numbers
entered incorrectly.
entered incorrectly.
• To cancel the point for A-B
• To cancel the point for A-B
repeat.
repeat. (CD)
OK
DISPLAY
• To display the current disc
mode.
• To display the current disc
mode.
• Hit to remove the disc.
• Hit to remove the disc.
• To search forward/backward
through a disc.
• To begin slow forward
/reverse playback during
the pause mode.
• To search forward/backward
through a disc.
• To call up the Menu
on a disc.
• To call up the file list.
(MP3/WMA)
EJECT
Confirm that “PLAYER MENU” is selected.
REV
FWD
MENU
QUICK SETUP
ENGLISH
4:3 LETTER BOX
BITSTREAM
MODE
• To pause disc playback.
• To begin disc playback.
• To begin disc playback.
• To turn the unit on or off.
• To turn the unit on or off.
REPEAT
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly. (CD)
• To play a track, group or disc
repeatedly. (MP3/WMA)
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
PAUSE
ENTER
PLAY
Select the desired language
for the On-Screen Display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
ENTER
• To arrange the playing
• To set black level on/off.
order or play randomly.
• To set virtual surround on/off.
• To set virtual surround on/off.
• To pause disc playback.
• To advance playback
one frame at a time.
OK
POWER
SEARCH
MODE
To exit the menu.
CD
• To select camera angles on
a disc.
ENGLISH
4:3 LETTER BOX
BITSTREAM
ENTER
DVD-V
AUDIO
SETUP
4
4
ANGLE
CLEAR
QUICK SETUP
or
STOP
PLAY
Disc
1
Confirm that “QUICK” is
selected.
3
+10
FWD
POWER
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
To stop
playback
PLAY
REV
STOP
2
4
Remote Control
To Change the OnScreen Language
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
Insert a
disc with
label
facing to
the left.
SKIP
(Alphabetical order)
1
To start
playback
SLOW
Button
3
2
POWER
3
STOP
5
3
2
1
1
WMA
EJECT
DISPLAY
ANGLE
2
MP3
CD
AUDIO
SUBTITLE
Installing the Batteries
for the Remote Control
DVD-V
SETUP
SETUP
• To search track.
• To search chapter, title or time. • To search time. (CD)
• To set or search the
• To set or search the
markers.
markers. (CD)
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To skip chapters.
• To skip tracks.
• To stop playback.
• To stop playback.
SKIP
STOP
SUBTITLE
TOP MENU
ZOOM
Printed in China
• To select subtitles on a disc.
• To return to the top file of the
highest hievarcy in the program
and file list. (MP3/WMA)
• To call up the Top Menu
on a disc.
• To magnify part of a picture.
(x2/x4)
1VMN20420 / E61S0UD ★★★★
✄
1