Owner’s Manual
OPEN/CLOSE
POWER
REW
F.FWD
STOP/EJECT
PLAY
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
RECORD
DVD
S-VIDEO
VIDEO
L - AUDIO - R
Playing discs
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Supplied Accessory
• Audio/Video cables
(WPZ0102TM015 or
WPZ0102LTE01)
• Owner’s Manual
(0VMN04201)
• Quick Use Guide
(1VMN20003)
Editing
• Remote control
• RF cable
(NB108UD)
(WPZ0901TM002)
with two AA batteries
Recording
VCR
SELECT
Getting started
EWR20V4
Connections
DVD Recorder with Video Cassette Recorder
Before you start
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
Owner's Manual
Others Español
(You CANNOT record on any copyright protected DVD disc with this unit.)
VCR functions
Before you use this unit , you need to complete connections. Refer to
“Connections” on pages 13-15.
To record a program easily, refer to “Easy DVD recording” on pages 16-17
after connections are completed.
Changing the SETUP menu
If you need additional operating assistance after reading this owner’s manual or to
order replacement accessories, please call
TOLL FREE : 1-800-605-8457
or visit our web site at http://www.funai-corp.com
Before you start
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical
wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Serial No.Retain this information for future reference.
Model No. _____________________
Serial No. _____________________
2
Before you start
Important Safeguards
porting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig.A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
Connections
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Playing discs
Editing
Changing the SETUP menu
VCR functions
Others Español
3
Recording
14. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions.Adjust only those controls that are covered by
the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f.When the product exhibits a distinct change in performance this
indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
Getting started
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions should
be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION:A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility
of the loss of an authorization code for a CATV converter, is
not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6.Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table.The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the
appliance should follow the manufacturer's
instructions and should use a mounting
accessory recommended by the manufacturer. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9.Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered.The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your
appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way.This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code,ANSI/NFPA No. 70, provides information with regard to proper grounding of the mast and sup-
Before you start
Precautions (cont’d)
Before you start
Precautions (cont’d)
Installation Location
Maintenance
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not
place anything directly on top of the unit. Do not place
the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat.Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes on the
sides of the unit.Avoid locations subject to strong vibration or strong magnetic fields.
SERVICING
Avoid the Hazards of Electrical Shock and Fire
CLEANING THE CABINET
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the
power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit cassette
holder.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating
a cold room or under conditions of high humidity. Do not
use this unit at least for 2 hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
• Please refer to relevant topics on the Troubleshooting
Guide on pages 97-99 before return the product.
• When this unit becomes inoperative, do not try to correct the problem by yourself.There are no user-serviceable parts inside.Turn off, unplug the power plug, and
please call our help line mentioned on the front page to
locate an Authorized Service Center.
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning
cloth.Wipe the disc from the center out. Do not wipe in
a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning
agents or antistatic spray intended for analogue records.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you
refer to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
Symbol in this owner's manual
Many functions of this unit are depending on the disc type
or the recording mode.
To specify for what disc type or recording mode each
function is, we put the following symbols at the beginning
of each item to operate.
Description
Symbol
Available to DVD Video discs
DVD-V
Video
Available to DVD-RW in Video mode
DVD-RW
VR
DVD-RW
Available to DVD-RW in VR mode
DVD-R
Available to DVD-R discs
CD
Available to Audio CDs
MP3
VCR
First:
(Press:)
DVD
First:
(Press:)
VCR
4
Available to CD-R/RW discs with
MP3 files
Available to VHS tapes
Use only
cassettes marked
with this unit.
Indicates that you need to select the DVD
mode by pressing DVD button on the
remote control before proceeding next step.
Indicates that you need to select the VCR
mode by pressing VCR button on the
remote control before proceeding next step.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in the unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
NOTES:
• Remember to read the instructions along with the video
head cleaner before use.
• Clean video heads only when problems occur.
Before you start
Before you start . . . . . . . . . . . . . . . . . . .2
Connections . . . . . . . . . . . . . . . . . . . . .13
Getting started . . . . . . . . . . . . . . . . . . .16
Recording . . . . . . . . . . . . . . . . . . . . . . .26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.85
.86
.88
.90
.92
VCR functions . . . . . . . . . . . . . . . . . . .94
Others . . . . . . . . . . . . . . . . . . . . . . . . .97
Español . . . . . . . . . . . . . . . . . . . . . . . .104
5
Others Español
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .97
RF converter output . . . . . . . . . . . . . . . . . . . . .100
Language code . . . . . . . . . . . . . . . . . . . . . . . . .101
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103
VCR functions
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Recording and One-touch timer recording . . . .94
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
One-touch timer recording . . . . . . . . . . . . . . . . . . . .95
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Other operations . . . . . . . . . . . . . . . . . . . . . . . .96
Changing the SETUP menu
Information on DVD play . . . . . . . . . . . . . . . . . .43
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playing discs using the disc menu . . . . . . . . . . . . . . .46
Playing discs using the title menu . . . . . . . . . . . . . . .47
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .48
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .48
Skipping TV commercials during playback . . . . . . . . .49
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .50
Slow forward / Slow reverse play . . . . . . . . . . . . . . .50
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Tour of the SETUP menu . . . .
Settings for Language . . . . . . .
Settings for Display . . . . . . . . .
Settings for Audio . . . . . . . . . .
Settings for Parental lock level
Editing
Playing discs . . . . . . . . . . . . . . . . . . . . .43
Changing the SETUP menu . . . . . . . . .85
Playing discs
Information on DVD recording . . . . . . . . . . . . . .26
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Restrictions on recording . . . . . . . . . . . . . . . . . . . .26
Information on copy control . . . . . . . . . . . . . . . . . .27
Making discs playable in other DVD player (Finalize) 27
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .28
Settings for the recording format to a blank disc . . .28
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31
Checking the recording picture quality . . . . . . . . . .32
One-touch timer recording . . . . . . . . . . . . . . . .33
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36
Settings for an external source . . . . . . . . . . . . . .37
Connection to an external source . . . . . . . . . . . . . .37
Recording from an external source . . . . . . . . . . . . .38
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .41
Setting a disc to protect . . . . . . . . . . . . . . . . . . .42
Information on disc editing . . . . . . . . . . . . . . . . .59
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .59
Editing discs in Video mode . . . . . . . . . . . . . . . . . . .59
Editing discs in VR mode . . . . . . . . . . . . . . . . . . . . .60
Editing DVD-RW discs in Video mode . . . . . . . .61
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .62
Setting or clearing chapter markers . . . . . . . . . . . . .64
Editing DVD-RW discs in VR mode (Original) . .65
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .66
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .67
Setting or clearing chapter markers . . . . . . . . . . . . .69
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .70
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .72
Releasing titles from protecting . . . . . . . . . . . . . . . .73
Editing DVD-RW discs in VR mode (Playlist) . . .74
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .75
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .76
Setting or clearing chapter markers . . . . . . . . . . . . .78
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .79
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .81
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .83
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .84
Recording
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .16
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .18
Getting channels automatically . . . . . . . . . . . . . . . . .18
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .19
Selecting the TV stereo or SAP . . . . . . . . . . . . .20
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .21
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .22
Setting the daylight saving time . . . . . . . . . . . . . . . .24
Selecting the TV aspect ratio . . . . . . . . . . . . . . .25
Editing . . . . . . . . . . . . . . . . . . . . . . . . .59
Getting started
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .13
Connection to a cable box or satellite box . . . .14
Connection to an Audio System . . . . . . . . . . . . .15
Connections
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Functional overview . . . . . . . . . . . . . . . . . . . . . . .7
Installing batteries in the remote control . . . . . . . . . .9
Using a remote control . . . . . . . . . . . . . . . . . . . . . . .9
VCR/DVD recorder switching . . . . . . . . . . . . . . . . . . .9
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . . .9
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .52
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Repeat/Random/Program play . . . . . . . . . . . . . .54
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Selecting the format of audio and video . . . . . .56
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .56
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .57
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .58
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .58
Before you start
Table of contents
Before you start
Features
Followings are what you can do with this unit.
Recording
DVD mode VCR mode
This unit is compatible with both DVD-RW, which is
rewritable repeatedly, and DVD-R, which is available for
recording once. Also, this unit allows to record to the
video cassette tape. You can choose either one for your
convenience.
Up to 8 programs recording:
You can program the unit to record up to 8 programs, up
to a year in advance. Daily or weekly program recordings
are also available.
One-touch timer recording:
Easily you can set a recording time as you prefer. Every
time the REC/OTR button on the remote control or the
RECORD button on the front panel pressed during
recording, the recording time will be increased by 30 minutes up to 8 hours.The recording automatically stops
when the recording time you set is reached.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if
the DVD disc is not copy protected.
DVD mode
REC MONITOR:
You can confirm the picture quality for recording in the
current recording speed which you set.
If you want to change the recording speed, press REC
SPEED button to set the desired recording mode.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Automatic Title menu making:
The unit makes title menus automatically when finalizing
the disc which are recorded in Video mode.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
Play
DVD mode
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital, you are allowed to experience the
theater surround sound from discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using search function. Search for a desired point on a disc by title, chapter, or time.
Start to play from Original and Playlist (VR mode):
Title playing is available from either an Original list or Playlist.
VCR mode
Quick search for what you want to watch:
You can easily find the part you want to watch using Index
search/Time search functions.An index mark will be assigned at
the beginning of each recordings you make. For Time search function, you can go to a specific point on a tape by entering the
exact amount of time you wish to skip.
Editing
DVD mode
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remains as it is, you can edit titles on
Playlist variously as you prefer.
Putting names on titles.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Deleting parts of titles, etc.
Protecting titles:
To avoid erasing titles, the protect function is useful when
it is ON in the original list.
Compatibility
DVD mode
Available for playing discs recorded in Video mode
on a regular DVD player (Video mode):
Discs recorded in the Video mode can be played on regular
DVD players, including computer DVD drives compatible with
DVD-Video playback*.You will need to finalize the discs
recorded in Video mode to play in other DVD players.
* DVD-Video Format (Video mode) is a new format for recording on DVDR/RW discs that was approved by the DVD Forum in 2000. Adoption of this format is optional for manufactures of DVD playback devices, and there are DVDVideo players, DVD-ROM drives or other DVD playback devices that do not
play DVD-R/RW discs recorded in the DVD-Video Format.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
6
Before you start
Before you start
Functional overview
Front Panel
1
2
3
4
5
OPEN/CLOSE
POWER
REW
F.FWD
STOP/EJECT
PLAY
RECORD
CHANNEL
DUBBING
VCR
SELECT
SELECT
STOP
PLAY
RECORD
DVD
22 20 18
21 19 17
16
1.
15 14 13 12 11 10 9 8
L - AUDIO - R
7
6
2 3
4 5
6
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
CB
L
COAXIAL
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
OUT
CR
2.
3.
4.
5.
7.
7
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
7
Others Español
6.
AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
S-VIDEO INPUT jack (LINE1) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable.
COMPONENT VIDEO OUTPUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables.
AUDIO INPUT jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
AUDIO OUTPUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
9 8
VCR functions
useful only in
DVD mode.
8. VIDEO OUTPUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
9. VIDEO INPUT jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
10. S-VIDEO OUTPUT jack (DVD only)
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUTPUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
12. COAXIAL DIGITAL AUDIO OUTPUT jack
(DVD only)
Use to connect an AV receiver, Dolby Digital
decorder or other equipment with a coaxial digital
input with a digital coaxial cable.
12 11 10
Changing the SETUP menu
• These jacks are
OUT
1.
Editing
Rear Panel
DIGITAL
AUDIO
AUDIO OUT OUT
Playing discs
1
Recording
12. DVD SELECT indicator
This indicator appears when the DVD output mode is selected.
13. VCR SELECT indicator
This indicator appears when the VCR output mode is selected.
14. DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the SETUP menu.
15. CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
16. Display (DVD/VCR)
Refer to “Guide to Displays on the front panel” on page 12.
17. Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
18. RECORD button (VCR)
Press once to start a recording. Press repeatedly to
start a One-Touch Recording.
19. PLAY button (VCR)
Press to start playback.
20. STOP/EJECT button (VCR)
EJECTbutton-Press to remove the tape from the unit.
STOP button-Press to stop the tape motion.
Press to cancel the proceeding timer recording in VCR.
21. F.FWD button (VCR)
Press to rapidly advance the tape, or view the picture
rapidly in forward during playback. (Forward Search)
22. REW button (VCR)
Press to rewind the tape, or to view the picture rapidly
in reverse during the playback mode. (Rewind Search)
Getting started
POWER button / indicator (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode, and turn the unit on.
Lights up when power is on.
2. Cassette compartment (VCR)
Insert a tape here.
3. A OPEN/CLOSE button (DVD)
Press to open or close the disc tray.
4. Select { B button (DVD/VCR)
Press to select the component you wish to operate.
5. Disc tray (DVD)
Place a disc when open.
6. AUDIO INPUT jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
7. VIDEO INPUT jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
8. S-VIDEO INPUT jack (LINE2) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable.
9. RECORD button (DVD)
Press to start recording.
Press repeatedly to start a One-Touch Recording.
10. PLAY button (DVD)
Press to start or resume play.
11. STOP button (DVD)
Press to stop playback or recording.
Press to cancel the proceeding timer recording in DVD.
VIDEO
Connections
S-VIDEO
Before you start
Functional overview (cont’d)
Remote Control
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
OPEN/CLOSE
1
2
15
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
4
14
VCR
DVD
18
19
PAUSE
3
21
PLAY
5
23
STOP
REC/OTR
6
7
8
SETUP
TIMER PROG.
MENU/LIST TOP MENU
10
12
9
11
CLEAR/C-RESET ZOOM
SEARCH
MODE
25
ENTER
REC MONITOR
CM SKIP
RETURN
SKIP
SKIP
16
17
27
28
29
20
22
24
26
30
13
1. POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode. Press
to cancel the timer standby
mode, and turn the unit on.
2. Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title/chapter/track on display or a TV
channel.
Or press to enter values for the
settings in the SETUP menu.
3. DISPLAY button (DVD/VCR)
Press to display or change the
on-screen display.
4. VCR button
Press to activate the remote
control in VCR mode. (Refer
to page 9)
Press to select the VCR output mode.
5. E button (DVD/VCR)
• DVD mode
During playback, press to play
fast reverse.
Or during playback is paused,
press to play slow reverse.
• VCR mode
Press to rewind the tape, or
to view the picture rapidly in
reverse during the playback
mode.
6. REC/OTR button (DVD/VCR)
Press once to start a recording. Press repeatedly to start
8
a One-Touch Recording.
7. SETUP button (DVD/VCR)
Press to display the setup menu.
8. REC MONITOR button (DVD)
Press to check the video to be
recorded before attempting.
9. MENU/LIST button (DVD)
Press to display the Disc menu.
To change ORIGINAL and
PLAYLIST on the TV screen.
(VR mode only)
10. TOP MENU button (DVD)
Press to display the top menu.
11. CLEAR/C-RESET button
(DVD/VCR)
• DVD mode
Press to clear the password once
entered or to cancel the programming for CD or to clear the
selecting marker number in the
marker setup mode or to clear
the program once entered in the
timer recording setting mode,etc.
• VCR mode
Press to reset the tape counter.
12. SEARCH MODE button (VCR)
To call up the index or time
search menu.
13. CM SKIP button (DVD)
During playback, press to skip
the 30 seconds.
14. REC SPEED button
(DVD/VCR)
Press to switch the recording
speed.
15. OPEN/CLOSE A button (DVD)
Press to open or close the
disc tray.
16. AUDIO button (VCR)
During playback a HiFi video
tape, press to change the
AUDIO OUT setting “HiFi”
and “MONO”.
17. CH K / L buttons (DVD/VCR)
• DVD mode
Press to change the channel
up and down.
• VCR mode
Press to change the channel
up and down.
Press to adjust the tracking
during playback or in slow
motion of the tape. Or while
playback is in still mode,
adjust the picture blurred vertically.
18. VIDEO/TV button (DVD/VCR)
Press to select VIDEO or TV
position.
19. SLOW button (VCR)
During playback, press to
view the video tape in slow
motion.
20. PAUSE F button
(DVD/VCR)
Press to pause play or
recording.
21. DVD button
Press to activate the remote
control in DVD mode. (Refer
to page 9)
Press to select the DVD output mode.
22. PLAY B button
(DVD/VCR)
Press to start or resume play.
23. D button (DVD/VCR)
• DVD mode
During playback, press to play
fast forward.
• VCR mode
Press to rapidly advance the
tape, or view the picture
rapidly in forward during playback.
24. STOP C button
(DVD/VCR)
Press to stop playback or
recording.
25. TIMER PROG. button
(DVD/VCR)
Press to display the timer
program setting menu.
26. ENTER button
(DVD/VCR)
Press to confirm or select
menu items.
27. K / L / { / B buttons
(DVD/VCR)
Press to select items or settings.
28. RETURN
button
(DVD/VCR)
Press to return to the previously displayed menu screen.
29. ZOOM button (DVD)
During playback, press to
enlarge the picture on the
screen.
30. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Or during playback is paused,
press to play reverse step by step.
SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or during playback is paused,
press to play forward step by step.
Before you start
Install two AA batteries (supplied) matching the
polarity indicated inside battery compartment of the
remote control.
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the
unit.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
1
3
2
Recording
Within about
23feet (7m)
60˚
Playing discs
Remote
control
REC
PAUS
k
E
h
REV
PLA
B Y
IP
P
SK
H
P
U/
MEN AL
GIN
STOC
G
TOP
ORI
g
K
PLA
R
NU
LIS
ME Y
ENTE
D
FW
T
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of battery together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery compartment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
Getting started
Using a remote control
Connections
Installing batteries in the remote control
Before you start
Functional overview (cont’d)
VCR/DVD recorder Switching
Editing
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with the SELECT button.
SELECT button
VCR MODE
OPEN/CLOSE
POWER
REW
F.FWD
STOP/EJECT
PLAY
RECORD
CHANNEL
DUBBING
VCR
SELECT
SELECT
STOP
PLAY
RECORD
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
VIDEO
L - AUDIO - R
GHI
DVD MODE
VCR button
DVD button
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
REC/OTR
SETUP
DVD
PAUSE
PLAY
STOP
SELECT
DVD
VCR SELECT
indicator
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
VCR functions
VCR
DVD SELECT
indicator
RETURN
SKIP
SKIP
CM SKIP
9
Others Español
Note
• Pressing only the SELECT button on the front
panel DOES NOT switch the mode of the
remote control.You MUST select the correct
mode on the remote control.
• Pressing the SETUP or the TIMER PROG.
button switches the unit to the DVD mode.
OPEN/CLOSE
DVD
S-VIDEO
Press the DVD button on the remote control.
(Verify that the DVD SELECT indicator is lit.)
Changing the SETUP menu
Press the VCR button on the remote control.
(Verify that the VCR SELECT indicator is lit.)
Before you start
Functional overview (cont’d)
Guide to Displays on screen menu
The unit uses the following types of display for most operations. SETUP/DISC/CD menu,Title list, and DISPLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some disc
information for checking the status of the disc.
SETUP/DISC/CD menu
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing K / L /
{ / B buttons.Then, press ENTER button to display each menu.
These provides entries to all main functions of the unit.
“DISC” is available only when a DVD-R/RW disc is
inserted into the unit. When playing back a DVDVideo disc (commercially available) or the finalized
DVD-R disc, you cannot select “DISC”.
“SETUP” is available only in the
Stop mode.
Setup Menu
Disc Setting
Setup
1
2
3
5
6
CD Playback Mode
Disc
CD Playback Mode
Edit
Random Play
Format
Program Play
Finalize
Disc Protect OFF
4
“CD” is available only when an
Audio CD disc or a CD-R/RW
disc with MP3 files is inserted
into the unit.
ON
1 2 3 4
1 2
Playback Setting
1. Playback:
To set up the unit to play discs as
you prefer.
2. Recording:
To set up the unit to record to
discs as you prefer.
3. Display:
To set up the OSD screen and the
front display of the unit as you
prefer.
4. Select Video:
To choose a line input to record
to DVD discs from other video
equipment.
5. Clock:
To set up the clock of the unit as
you need.
6. Channel:
To make the channel setting of
the unit as you prefer.
10
1. Edit:
Turns on a title list, (When a disc
with VR mode is inserted,
'Original' or 'PlayList' is available.),
which shows the recorded titles
on the disc.
2. Format:
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
3. Finalize:
Allows you to finalize a disc
recorded titles.
4. Disc Protect (VR mode
only) :
Allows you to protect a disc from
accidental editing or recording.
1. Random Play:
To set the random play programming.
2. Program Play(Audio CD
only):
To set the program playing.
Before you start
Before you start
Functional overview (cont’d)
DISPLAY menu
DVD
Details are on page 41.
4
1
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
Getting started
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
1. Indicates a disc type and a
format mode.
2. Indicates a recording mode
and possible recording time.
3. Indicates a current channel
number.
4. Indicates a title number, chapter number, and the time
elapsed of disc play.
5. Each icon means:
: Noise Reduction
: Zoom
1
1
00:00:00
Connections
DVD mode
First:
DVD-RW
Video mode
CH 1
2
3
Recording
SP 1:25 Rem.
5
Playing discs
VCR
Press DISPLAY button to call up
the display menu.
2
CH21
0:00:00
HIFI
3
4
5
VCR functions
SP
Changing the SETUP menu
1
1. Playback status of the current
tape.
2. Indicates a current channel
number.
3. Indicates a recording speed
only five seconds.
4. Indicates a Tape Counter.
5. Audio status of the current
tape.
Editing
VCR mode
First:
Others Español
11
Before you start
Functional overview (cont’d)
Guide to Displays on the front panel
4
2
1
3
6
5
1. Current status of the unit
: Appears when a disc play
is paused.
: Appears when playing a
disc.
: Appears when the timer
programming has been
set and is proceeding.
: Appears during recording
process.
:
Appears during repeat
play.
:
Appears when a tape is in
the unit.
2. Disc type and Current
status of the unit
: Appears when an audio CD
or a disc with MP3 files is
inserted in the disc tray.
: Appears when a DVD disc
is inserted in the disc tray.
Appears when the timer
recording is proceeding in
DVD.
Appears when DVD is in
the timer recording standby mode.
:
Appears when a DVD-R disc
is inserted in the disc tray.
:
Appears when a DVDRW disc is inserted in
the disc tray.
: Appears when the timer
recording is proceeding in
VCR.
Appears when VCR is in
the timer recording standby mode.
:
Appears during VCR to DVD
duplication process.
:
Appears during DVD to VCR
duplication process.
2
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
• VCR tape counter
• OTR remaining time
6.
: Appears in the afternoon with the clock
displaying.
1. Appears when the disc tray is
opening.
Display message
1
3. Recording speed
Indicates the recording speed of
the disc.
4. Title/Track and Chapter
mark
: Appears when indicating
a title/track number.
: Appears when indicating
a chapter number.
3
4
2. Appears when the disc tray is
closing or close.
3. Appears when a disc is loading
in the disc tray.
4. Appears when recording data
is writing on to the disc.
12
Connections
Before you start
Connection to a TV
Antenna
Antenna
(Back of TV)
Cable
Signal
3
or
Connections
(Back of TV)
Cable
Signal
or
Connect
RF Cable
(supplied)
Disconnect
DIGITAL
AUDIO
AUDIO OUT OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
CB
L
COAXIAL
IN
R
Getting started
1
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
2
OUT
CR
Connect
OUT
(Back of this unit)
Recording
4 Plug in the AC power cord of this unit.
Make one of the following connections, depending on the capabilities of your existing equipment.
Method 1
Method 2
Good picture
Better picture
Method 3
Playing discs
Basic Audio
Best picture
TV
AUDIO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO IN
Y
CB
CR
Audio cable
(supplied)
S-Video
cable
(commercially
available)
Component
Video cables
(commercially
available)
DVD
DVD/VCR
AUDIO OUT
AUDIO
OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
IN
R
S-VIDEO
Y
CB
R
R
VIDEO IN VIDEO OUT
COMPONENT
VIDEO OUT
DVD
L
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
CB
L
R
DVD/VCR
OUT
VIDEO OUT
CR
OUT
CR
OUT
or
DVD
AUDIO
OUT
COMPONENT
VIDEO OUT
OUT
Y
CB
L
COAXIAL
IN
R
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
VCR functions
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
L
R
VIDEO IN VIDEO OUT
OUT
CR
OUT
R
• These jacks are
useful only in DVD
mode.
Changing the SETUP menu
This unit
Editing
Video
cable
(supplied)
AUDIO OUT
13
Others Español
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• Method 2 and method 3 are only useful in DVD mode.
Connections
Connection to a cable box or satellite box
Connection A
(Cable box or
Satellite box)
IN
(Back of this unit)
DVD/VCR
OUT
ANTENNA
IN
OUT
RF Cable
Cable
Signal
E
(supplied)
(Back of TV)
Select this connection when you want to view or record a scrambled channel.With this connection, channels
cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable
box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER button.The “POWER” indicator on the front panel will appear.
Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of
the cable box or satellite box).
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
• If you use the channel 4, you need to change this unit’s RF output to channel 4. Refer to “RF converter
output” on page 100.
2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3) At the cable box or satellite box, select the channel you want to view or record.
(Back of this unit)
Connection B
DVD/VCR
ANTENNA
IN
Cable
Signal
OUT
(Cable box or
Satellite box)
IN
RF Cable (supplied)
E
OUT
RF Cable
(Back of TV)
Select this connection when you want to change channels on this unit.With this connection, you may watch
one channel while recording another.
• You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output channel.)
• Refer to “RF converter output” on page 100.
2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.
3) Turn on this unit by pressing POWER button. The “POWER” indicator on the front panel will appear.
Then, select the channel you want to view or record.
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
To playback a DVD disc or a tape
Follow the steps 1) to 2) above.Then, playback a DVD disc or a tape.
• Refer to “Playback” on pages 44-45, 94.
To view one channel while recording another
1) While you are recording on this unit, press VIDEO/TV button.
2) At the cable box or satellite box, select the channel you want to view.
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
14
Connections
Before you start
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to each owner’s manual for further information on other devices.
Method 1
Method 2
Stereo system
Analog audio
input jacks
AUDIO
COAXIAL
Connections
Dolby Digital decoder,
MD deck or DAT deck
Digital audio
input jack
Getting started
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
This unit
DVD/VCR
AUDIO OUT
AUDIO OUT
L
DIGITAL
AUDIO OUT
Recording
R
DVD
DIGITAL
AUDIO OUT
COAXIAL
or
DVD
AUDIO
OUT
R
Changing the SETUP menu
VCR functions
Others Español
15
Editing
Note
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder, and set “Dolby Digital”
to “Stream” for the “Digital Out” setting in the
SETUP menu. (Refer to pages 90-91.)
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set
“Dolby Digital” to “PCM” for the “Digital Out” setting in the SETUP menu. Playing a DVD using incorrect settings may generate noise distortion, and may
also damage the speakers. (Refer to pages 90-91.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 90-91.)
• By hooking this unit up to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital 5.1 channel surround sound as heard in the
movie theaters.
Playing discs
L
Getting started
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
Step 1: Choose a disc type
Step 2: Insert a blank disc
Remote Control
There are several types of DVD disc recordable
to choose from. Choose an applicable type by
“DVD disc types” on this page.
This unit can record on the following type of
discs.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
1
Turn on
the unit
For example, when you want to record repeatedly on the same disc, or when you want to edit the
disc after recording, select the rewritable DVDRW type disc.
When you want to save recordings without any
alteration, a non-rewritable DVD-R can be your
choice.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
2
Open the
disc tray
DEF
CH
OPEN/CLOSE
3
Close the
disc tray
CH
Loading
This operation may take a
while to be recognized.
DVD disc types
.
: Most suitable.
: Can be used.
Format the disc
: Some functions are limited.
You want to
DVD-RW VR
: Cannot be used.
DVD-RW Video
DVD-R
DVD-RW Video
DVD-R
Record TV programs
Reuse by deleting unwanted contents
Edit recorded contents
Edit/Record from connected equipment
Copy discs for distribution
*1
Play on other DVD equipment
*1
Features
DVD-RW VR
Recording
Rewritable?
Yes
Yes
No
Can create chapters at fixed intervals (auto.)
Yes
Yes
Yes
Can create chapters wherever you like (manual)
Yes
No
No
Can record 16:9 size pictures
Yes
Yes
Yes
Can record Copy-Once programs
Yes
No
No
Can perform basic edit functions
Yes
Yes
No
Can perform advanced edit functions (Playlist edit)
Yes
No
No
Editing
*1
16
DVD-RW (VR mode) can only be played on DVD
equipment that is VR compatible.
Note:
For details of the above functions and implied
restrictions, see the explanations inside the manual.
Insert the disc in the unit.
Then, format the disc from
SETUP menu.Video format
(Video mode) or Video
recording format (VR mode)
will be available depending on
the disc type inserted.This is
necessary to prepare the disc
for recording. Details are on
pages 28-30.
Getting started
1
Step 4: Select the
desired
channel
Step 5: Record to
DVD discs
To select the DVD mode
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Connections
Step 3: Select the
Recording
speed
CH
VIDEO/TV
SLOW
0
VCR
DISPLAY
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
2
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
2
VCR
CH
VIDEO/TV
7
SPACE
SLOW
DVD
PAUSE
OPEN/CLOSE
PLAY
STOP
CH
REC/OTR
VIDEO/TV
SETUP
TIMER PROG.
ENTER
REC MONITOR
SLOW
MENU/LIST TOP MENU
RETURN
0
0
DISPLAY
PAUSE
Getting started
POWER
DVD
Before you start
Easy DVD recording (Cont’d)
DISPLAY
1
VCR
DVD
PAUSE
To select the recording
speed
CH 1
Recording
SP 2:01 Rem.
I
Hint 1: Play the recorded contents
What is titles and chapters?
Step 6: Stop the
Record
PQRS
Title 1
Title 2
7
TUV
WXYZ
8
9
SPACE
VIDEO/TV
SLOW
0
DISPLAY
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
VCR
DVD
PAUSE
Editing
The contents of DVD disc are generally
divided into some titles.Titles may be
further subdivided into chapters.
Playing discs
You can select the title you want to play from a displayed menu, and immediately start to play. Recorded contents are very accessible on a disc, the procedure is simple really as you choose a
title on a chapter from the menu
Start Rec.
Stop/Start
Stop Rec.
screen.
PLAY
STOP
REC/OTR
SETUP
REC MONITOR
TIMER PROG.
ENTER
Changing the SETUP menu
Hint 2: Edit the recorded disc
You will find editing discs very easy, and the unit offers convenient edit functions, which are possible only with DVD-R/RW discs.
You can edit the following from a title list.
58%
Writing to Disc
VCR functions
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles (VR mode)
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings. Any Playlist does not take up much disc space.
Throughout this manual, you will find Original and Playlist to refer to the actual
content and the edited version.
• Original content refers to what’s actually recorded on the disc.
• Playlist content refers to the edited version of the disc; how the Original
content is to be played.
This operation may
take a while to be
completed.
17
Others Español
What “Original” or “Playlist” is for?
Getting started
Channel setting
All channels are stored in the unit
when purchased.We recommend
that you get available channels in
your area stored using “Auto
Preset” in the Channel Preset of
the SETUP menu.
4
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Getting channels automatically
1
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
Setup
DISPLAY
DVD
VCR
PAUSE
PLAY
1
Press POWER button to turn
on the unit.
3
7
Playback Setting
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
2
Turn the TV on and be sure
to select the input to which
the unit is connected.
SEARCH
MODE
5
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
Auto Preset
Manual Preset
TV Audio Select
Stereo
6
3
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Auto Preset” using K
/ L buttons, then press
ENTER button.
The unit will start getting channels available in your area.
CH 18
SKIP
SKIP
CM SKIP
4
5
6
To select a channel
You can select a channel by
directly entering channel using
the Number buttons on the
remote control.
Notes for using the
Number buttons:
• When selecting cable channels
which are higher than 99,
enter channel numbers as a
three-digit number.(For example: 117, press 1,1,7)
• You must precede single-digit
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
• You can select the line input
mode (“L1” or “L2”).To select
“L1” by pressing [0],[0],[1].To
select “L2” by pressing
[0],[0],[2].Details are on page 38.
Auto Presetting Now
Note
Setup Menu
7
Press SETUP button to exit.
•You can select only the channels
memorized in this unit by using
the CHANNEL buttons.
18
• If the auto presetting is cancelled during presetting, some
channels not yet preset may
not be received.
• The selection will depend on
how you receive the TV channels.
To cancel the auto presetting during scanning:
Press RETURN button or
SETUP button to cancel.
Getting started
Before you start
Channel setting (cont’d)
Adding/deleting channels
4
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
1
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
DISPLAY
SLOW
DVD
VCR
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
5
CLEAR/C-RESET ZOOM
SKIP
SKIP
Playing discs
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
CM SKIP
2
3
4
5
6
Recording
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
SEARCH
MODE
RETURN
Getting started
CH2
Add
Delete
MENU/LIST TOP MENU
2
CH
VIDEO/TV
0
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup Menu
OPEN/CLOSE
DEF
PQRS
7
Setup > Channel Preset > Manual Preset
AUDIO
Connections
The channels you no longer
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
Setup > Channel Preset > Manual Preset
CH18
Add
Delete
Setup
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
DVD
Auto Preset
Manual Preset
TV Audio Select
VCR functions
VCR
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from a channel
memory.Then a next channel
number will appear so that you
can continue adding or deleting
channels.
Changing the SETUP menu
3
Setup > Channel Preset
Editing
6
Playback Setting
Stereo
7
Press SETUP button to exit.
Others Español
19
Getting started
Selecting the TV stereo or SAP
You can select a sound channel to
output from TV. “Stereo” has
been selected as the default.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “TV Audio Select”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Channel Preset
VCR
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
Auto Preset
CH
VIDEO/TV
SLOW
0
Manual Preset
TV Audio Select
OPEN/CLOSE
DEF
PQRS
7
DVD
AUDIO
DISPLAY
DVD
VCR
PAUSE
Stereo
Stereo
SAP
PLAY
1
6
5
Setup Menu
Select “Stereo” or “SAP”
using K / L buttons, then
press ENTER button.
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Stereo:
Outputs main-audio.
SAP:
(Secondary Audio Program)
Outputs sub-audio.
Refer to the item in “Glossary”
on page 102 for more information.
6
Playback Setting
Press SETUP button to exit.
3
Select “Channel Preset”
using K / L / { / B buttons,
then press ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
Auto Preset
Manual Preset
TV Audio Select
20
Stereo
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
Getting started
Before you start
Clock setting
Auto Clock Setting
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Clock
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
Clock Setting
Auto Clock Setting
Daylight Saving Time
CH
VIDEO/TV
SLOW
0
OFF
Auto
Auto
Manual
Off
DISPLAY
DVD
VCR
PAUSE
PLAY
1
6
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
5
CLEAR/C-RESET ZOOM
SEARCH
MODE
• If you do not know your
PBS channel number, select
“Auto” using K / L buttons,
then press ENTER button.
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
Setup Menu
Setup > Clock
Clock Setting
2
Auto Clock Setting
Daylight Saving Time
Playing discs
• If you know your PBS channel number, select “Manual”
using K / L buttons, then
press ENTER button.
VCR DVD
OFF
Set Channel
No.
Auto
Auto
CH1
Manual
Off
Editing
Select SETUP using { / B buttons, then press ENTER button.
SETUP menu will appear.
Setup
6
Select “Clock” using K / L / { / B
buttons, then press ENTER button.
Clock menu will appear.
7
Setup > Clock
VCR DVD
Clock Setting
Auto
Daylight Saving Time
ON
21
Others Español
Auto Clock Setting
Press POWER button to turn
off the unit.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock on
the display of the front panel.
Note
• The clock may set itself automatically after you connect the
antenna/cable signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the display
of the front panel.
• If the current time is not displayed or the displayed clock
is not correct, set the clock
manually.
VCR functions
3
Press SETUP button to exit.
Changing the SETUP menu
Enter your PBS channel
number using Number or K
/ L buttons, then press
ENTER button.
Playback Setting
Recording
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
DEF
PQRS
7
VCR DVD
AUDIO
Getting started
Make sure
• The antenna/cable TV connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station on them to
set the clock automatically.
7
Connections
Set the clock before you try the
timer recording. If a Public
Broadcasting Station (PBS) is available
in your area, follow Auto Clock
Setting below. If not, follow Manual
Clock Setting on pages 22-23.
Getting started
Clock setting (cont’d)
Manual Clock Setting
4
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Clock Setting” using
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Clock
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
VCR DVD
DISPLAY
DVD
VCR
PAUSE
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
---/--/----(---)
--:--
PLAY
1
STOP
REC/OTR
SETUP
Setup Menu
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Press ENTER button again.
Default date will appear.
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
CLEAR/C-RESET ZOOM
SEARCH
MODE
5
Enter the date (month / day /
year) using K / L buttons.
Press { / B buttons to move
the cursor.
Setup > Clock
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
6
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
12 : 00AM
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
6
Enter the time (hour /
minute) using K / L buttons.
Press { / B buttons to move
the cursor.
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Setup > Clock
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
09 : 24 AM
Note
• Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds
when you set the clock manually.
22
Getting started
Before you start
Clock setting (cont’d)
8
Press K / L buttons to select
AM or PM, then press ENTER
button.
Clock menu will appear, then the
settings will be activated.
Press SETUP button to exit.
Although seconds are not displayed,
they begin counting from zero.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Clock
OPEN/CLOSE
Connections
7
CH
VIDEO/TV
SLOW
0
VCR DVD
DVD
VCR
DISPLAY
PAUSE
Clock Setting
Auto
Daylight Saving Time
ON
Getting started
Auto Clock Setting
PLAY
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
7
SKIP
CM SKIP
Recording
Playing discs
When “Auto Clock Setting” is selected to “Auto” or
“Manual”, change it to “OFF” as following steps.
Repeat steps (1) to (3) in “Manual Clock Setting”.
PLAY
6
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Select “OFF” using K / L
buttons, then press ENTER
button.
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
VCR DVD
OFF
Auto
Auto
Manual
Off
6
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
4
5
Press SETUP button to exit.
Changing the SETUP menu
5
SETUP
Editing
4
STOP
REC/OTR
VCR functions
Others Español
23
Getting started
Clock setting (cont’d)
Setting the daylight saving time
When Daylight Saving Time is
ON, the unit clock will automatically move forward one hour on
the first Sunday in April and move
back one hour on the last Sunday
in October.
4
Select “Daylight Saving
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
1
Setup > Clock
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Auto Clock Setting
CH
VIDEO/TV
SLOW
0
VCR DVD
DISPLAY
DVD
VCR
PAUSE
Clock Setting
Daylight Saving Time
Auto
ON
OFF
PLAY
1
6
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
5
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight saving time.
Setup Menu
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
Clock Setting
24
OPEN/CLOSE
Auto Clock Setting
Auto
Daylight Saving Time
ON
6
Press SETUP button to exit.
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
Getting started
Before you start
Selecting the TV aspect ratio
Playback menu will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
Fast Forward with Audio
ON
OFF
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
1
AUDIO
Connections
You can select the TV aspect ratio
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected as the default.
SPACE
CH
VIDEO/TV
SLOW
0
4
DVD
VCR
PLAY
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
Option window will appear.
1
6
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
SEARCH
MODE
16:9 Box
Wide
4:3 Letter
8 & Scan
4:3 Pan
16:9English
Wide
Original
OFF
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
Digital Out
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
ON
Fast Forward with Audio
OFF
Refer to the Note on this
page.
Playing discs
2
Dynamic Range Control
5
Editing
Select a desired option using
K / L buttons, then press
ENTER button.
6
Playback Setting
Recording
TV Aspect
DVD
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C-RESET ZOOM
Setup > Playback
Setup Menu
PAUSE
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
DISPLAY
Press SETUP button to exit.
Changing the SETUP menu
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Others Español
25
VCR functions
Note
If you have a standard TV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen.
Select “4:3 Pan & Scan” for a
full height picture with both
sides trimmed.
If you have a widescreen TV:
Select “16:9 Wide”.
Recording
Information on DVD recording
Information
Recording speed
This unit can record to DVD-R and DVD-RW discs.
When recording, you will need to select a recording
format between Video mode and VR mode depending on the disc format.The disc format for DVD-R
is always “Video format,” so a recording format will
be “Video mode”.
On the other hand, when recording to DVD-RW, a
recording format will be “Video mode” or “VR
mode” because a disc format is available between
“Video Recording format” and “Video format” for
DVD-RW.
You can select a recording speed among 6 options,
and the recording time will depend on the recording speed you select as follows.
Logo
Attributes
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
DVD-RW 600 minutes (4.7GB)
DVD-R
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB)
About Video mode and VR (Video Recording)
mode
Video mode is the same recording format as DVDVideo discs purchased locally, so that you can play in
most DVD players.To play in other DVD players,
you will need to finalize (see page 39). Unless finalized, you can play, record additionally or edit discs
recorded in Video mode with this unit.
VR (Video Recording) mode is a basic recording
format for DVD-RW.You can record and edit
repeatedly.
DVD players with
are capable of playing
DVD-RW recorded in VR mode.
Disc type
Disc format
Functions
Video mode
Playing, limited recording,
limited editing
Video
DVD-RW
DVD-RW VR mode
VR
DVD-RW
Video mode
DVD-R
26
DVD-R
Playing, recording,
Original/Playlist editing
Playing, limited recording,
limited editing
Recording Recording
Video/Sound Quality
speed
time *
XP (1H)
60 min
SP (2H)
120 min
LP (4H)
240 min
EP (6H)
360 min
SLP (8H)
480 min
SEP (10H) 600 min
* This table is designed for a new single-sided 12cm
disc as the standard.The recording time are estimates and actual recording time may differ.
* The audio and video quality is getting poorer as
the recording time becomes longer.
Restrictions on recording
You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Video
discs and some satellite broadcasts.
If copy-protected material is encountered during a
recording, recording will pause or stop automatically
and an error message will be displayed on-screen.
Video that is “copy-once only” can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
When recording a TV broadcast or through an
external input, you can display copy control information on screen.
What is “CPRM”?
CPRM is a copy protection system with scramble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This unit is CPRM compatible, which means
that you can record copy-once broadcast programs, but you cannot then make a copy of
those recordings. CPRM recordings can only be
made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played
on players that are specifically compatible with
CPRM.
Recording
Information on copy control
Some satellite broadcasts include copy-protected
information. For recording these, refer to the following.
Copy-free Copy-once Copyprohibited
Video mode
DVD-RW
ver.1.1
ver.1.1 CPRM
compatible
Recordable
Recordable only for DVD-RW ver.1.1 compatible
with CPRM
Not Recordable
Mode
DVD-R
ver.2.0
Video mode
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
Video mode
Playing discs
Disc type
Recording
Video mode
DVD-R
ver.2.0
Getting started
VR mode
DVD-RW
ver.1.0
ver.1.1
ver.1.1 CPRM
compatible
You will need to finalize discs when in the following:
- when playing DVD-R/RW (Video mode) recorded
with this unit in other DVD players.
- when DVD-RW (VR mode) recorded with this
unit fails to be played in other RW compatible DVD
players.
• Once DVD-R/RW (Video mode) is finalized, you
cannot record additionally or edit.
• You can record additionally to or edit DVD-RW
(VR mode), which is finalized with this unit.
• Be sure to finalize discs recorded with this unit by
using this unit.
• Title menu will be created automatically in DVDR/RW (Video mode) finalized with this unit.
To play in other DVD players, finalize discs recorded
from this unit with the following condition.
Connections
Disc type/
format
Making discs playable in other DVD
player (Finalize)
Before you start
Information on DVD recording (cont’d)
Note
Changing the SETUP menu
VCR functions
Others Español
27
Editing
• The audio and video quality is getting poorer as
the Recording time becomes longer.
• This unit cannot record CD-R or CD-RW discs.
• DVD-R/RW and CD-R/RW discs recorded using
a personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty, or if
there is dirt of condensation on the unit’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software publisher for more detailed information.)
Recording
Formatting a disc
Settings for the recording format to a blank disc
Video
VR
DVD-RW
DVD-RW
When inserting a blank disc, the
unit starts to initialize the blank
disc.
After that,You can record to the
disc with the recording format
selected in SETUP menu.
You are allowed to set a specified
time for chapter marks.
3
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
DISPLAY
Dubbing Mode
1
VCR
DVD
PLAY
VCR
DVD
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
4
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
Setup > Recording
Setup Menu
PAUSE
Video mode
10 minutes
Timer Programming
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
AUDIO
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
DVD
mode
DVD-RW Recording Format Video
VR mode
VR
mode
Auto Chapter
10 minutes
Timer Programming
Dubbing Mode
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
VCR
DVD
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
Video mode has been selected as
the default.
5
Select “Video mode” or “VR
mode” using K / L buttons,
then press ENTER button.
The recording mode will be set.
Note
• When inserting a blank
DVD+R or DVD+RW disc,
the error message ("Disc
Error") will appear.This unit is
not compatible with a
DVD+R/RW disc.
• If using a DVD-RW (ver 1.0)
disc, recording will start in VR
mode even you choose video
mode in SETUP menu.
28
Recording
Before you start
Formatting a disc (cont’d)
6
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
Setup > Recording
DVD
Timer Programming
Dubbing Mode
VR mode
OFF
5 minutes
10
minutes
10 minutes
15 minutes
VCR DVD
30 minutes
60 minutes
SLOW
VCR
DVD
PAUSE
PLAY
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
“10 minutes” has been selected as
the default.
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
6
7
Getting started
Auto Chapter
CH
VIDEO/TV
0
DISPLAY
DVD-RW Recording Format
OPEN/CLOSE
Connections
Select “Auto Chapter” using
K / L buttons, then press
ENTER button.
Option window will appear.
CM SKIP
Recording
7
Playing discs
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will be put as you
specified.
8
Press SETUP button to exit
SETUP menu.
Editing
Changing the SETUP menu
VCR functions
29
Others Español
Note
• The time for chapter marks is
not accurate in Video mode.
Recording
Formatting a disc (cont’d)
Reformatting a disc
Video
VR
DVD-RW
DVD-RW
If you are using a DVD-RW disc,
by default it will be Video mode.
You can change this to VR mode
from SETUP menu.
1
4
Select “Yes” using { / B buttons, then press ENTER button.
Option window will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
7
AUDIO
OPEN/CLOSE
DEF
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
Disc
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
DISPLAY
DVD
VCR
Edit
Format
PLAY
Finalize
Disc Protect OFF ON
Yes
STOP
No
REC/OTR
1
Are you sure?
Yes
No
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
* VR mode only
CLEAR/C-RESET ZOOM
SEARCH
MODE
5
Setup Menu
Select “Yes” using { / B buttons, then press ENTER button.
Formatting will start.
2
PAUSE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
Select “DISC” using { / B buttons, then press ENTER button.
DISC menu will appear.
Disc
Edit
58%
Format
Formatting
Finalize
Disc Protect OFF ON
6
Formatting is complete.
100% will be indicated.
* VR mode only
3
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
100%
Formatting
Disc
Edit
This operation may take a
while to be completed.
Format
Finalize
Disc Protect OFF ON
Yes
* VR mode only
30
No
Note
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format
at step 5, select “No”.
Recording
Before you start
Basic recording
DVD-R
Video
VR
DVD-RW
DVD-RW
DVD
4
Select a desired channel to
record using CH K / L buttons or number buttons.
1
2
4
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH 1
DISPLAY
SLOW
VCR
DVD
PAUSE
5
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
5
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Recording
Press REC/OTR button to
start recording.
I mark will be displayed for 5
seconds.
6
ENTER
REC MONITOR
MENU/LIST TOP MENU
Select a recording speed
using REC SPEED button.
4
0
This operation may take a
while to be recognized.
2
CH
VIDEO/TV
Getting started
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
OPEN/CLOSE
Connections
Follow the steps below to record
TV programs.
First:
SP 2:01 Rem.
Press STOP C button to stop
the recording.
This operation may take a
while to be completed.
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• You cannot mix two formats
on one DVD-RW disc.
When you load a disc once
recorded before, the recording format cannot be changed
even if you change it in
SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
31
Others Español
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
6
Note
VCR functions
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“Video mode” has been selected
as the default. Refer to “Settings
for the recording format to a
blank disc” on pages 28-29.
To pause the recording, press
PAUSE F button. Press REC/OTR
button or PAUSE F button to
restart the recording.
Changing the SETUP menu
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 28-30.
I
Editing
3
Playing discs
Refer to “Recording speed” on
page 26.
Recording
Basic recording (cont’d)
Checking the recording picture quality
DVD-R
Video
VR
DVD-RW
DVD-RW
You can confirm the recording picture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
First:
2
1
Press REC MONITOR button
again to exit.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DVD
DISPLAY
1
DVD
VCR
PAUSE
PLAY
STOP
While the unit is in STOP or
REC with a DVD disc to
record inserted, press REC
MONITOR button.
The TV program will be on the
screen in the recording picture
quality with the recording speed
you have selected.
REC/OTR
1
2
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
CH 18
Rec Monitor
XP
If you want to change the
recording speed, press REC
SPEED button repeatedly.
The recording speed will be
changed as you press the button
as shown. Refer to “Recording
speed” on page 26.
• You cannot change the recording speed during recording.
XP
SP
LP
SEP
SLP
EP
Note
• You cannot check the recording sound quality with the
Rec monitor function.
32
Recording
Before you start
One-touch timer recording
DVD-R
Video
VR
DVD-RW
DVD-RW
1
2
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
5
AUDIO
SPACE
CH
4
VIDEO/TV
SLOW
0
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording time (30 minutes
to 8 hours) appears on the TV
screen.
Recording will start.
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
5
RETURN
SKIP
SKIP
CM SKIP
Recording
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
Select a desired channel to
record using CH K / L buttons or number buttons.
This operation may take a
while to be recognized.
Select a recording speed
using REC SPEED button.
Refer to "Recording speed" on
page 26.
3
(Normal Recording) 1:00
8:00
7:30
When reaches the specified time,
the unit will be turned off automatically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
while to be completed.
Note
33
Others Español
• The unit will be turned off
automatically under the conditions following.
1)No space remained on the
disc.
2)When a power failure
occurs.
• If OTR is finished in DVD
during playback or REC mode
in VCR, the DVD will be in
STOP mode and the VCR
keeps the current mode.
VCR functions
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
0:30
Changing the SETUP menu
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to pages 2829 "Settings for the recording format to a blank disc."
0:30
Editing
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 28-30.
I
Playing discs
2
Getting started
DVD
4
Connections
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
First:
Recording
Timer recording
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
You can program the unit to record
up to 8 programs, up to a year in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
tape with a safety tab.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
You can choose the timer
programming menu by pressing TIMER PROG. button. In
this case, continue with step 5.
Setup > Recording > Timer Programming
Date
-------
1
Start
End
CH
DVD
VCR
Speed
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
5
DVD
VCR
PLAY
Select the program which is
not set up using K / L buttons, then press ENTER button.
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
6
SEARCH
MODE
RETURN
SKIP
CM SKIP
Enter the date using K / L
buttons, then press B button.
Setup Menu
Setup > Recording > Timer Programming
2
DVD
Date
Start
End
CH VCR
Speed
JAN / 01 - - : - -AM - - : - -AM CH8 DVD
-------
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
PAUSE
SKIP
2
3
4
5
6
7
e.g. January 1st
JAN/01
L
Daily
Setup
L
When pressing L button at the
current date, timer recording
mode will change as follows.
MON-SAT
L
MON-FRI
L
SAT
L
Playback Setting
FRI
L
3
Note
L
SUN
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
Video mode
10 minutes
Timer Programming
Dubbing Mode
VCR
DVD
L
DEC/31
7
Enter the time to start and
to end using K / L buttons,
then press B button.
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH VCR
Speed
JAN/12 10 :00PM - - : - -AM CH8 DVD
-----
34
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 21 or
“Manual Clock Setting” on
page 22 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
Recording
Before you start
Timer recording (cont’d)
8
10
Select the channel number to
Select a recording speed
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
To record from external input, L1
or L2.
using K / L buttons, then
press B button.
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
SLOW
DVD
VCR
DISPLAY
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
8
9
10
11
Note
• After step 12, the unit will be
turned on automatically 2
minutes (For VCR recording,
10 seconds) in advance of the
recording time to start and
waits to start.Then the
recording will start at the
recording time you set.
Checking, canceling, or correcting the timer programming
information
4
Press POWER button so that
indicator disappear from
the front display.
To clear the timer programming,
select your desired program
using K / L buttons, then press
CLEAR/C-RESET button.
2
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD 1H
3
5
Press TIMER PROG. button to exit.
6
Press POWER button to return
to the timer standby mode.
Press STOP C button to stop the disc recording or STOP/EJECT C A to
stop the tape recording on the front panel of the main unit. STOP C button on the remote control is not effective.
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
4
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
2
5
4
SKIP
CM SKIP
Note
• Press TIMER PROG. button to
check the timer programming
in process.
When the timer recording is
proceeding, that program will
be red highlighted. In this case,
you cannot select any other
program.
35
Others Español
To stop the timer recording in process
.@/:
1
AUDIO
VCR functions
Check the information on the
list you will need.
To correct the timer programming, select your desired program using K / L buttons, then
press ENTER button.
Next, correct the timer programming
using K/L/{/B buttons.
Finally, press ENTER button again.
REC SPEED
Changing the SETUP menu
Press TIMER PROG. button.
Timer Programming list will appear.
POWER
Editing
1
1
6
Playing discs
Press POWER button to turn off.
indicator will appear on the
front display.
CH
VIDEO/TV
0
11
12
DEF
SPACE
Refer to “Recording speed” on page
26 for DVD or page 94 for VCR.
Press ENTER button when all
information required is
entered.
Your program setting will be
stored.
• To set another program, repeat
steps 5 to 11.
• To exit, press SETUP button.
OPEN/CLOSE
Recording
• To record on to a tape, select VCR.
• To record on to a disc, select DVD.
.@/:
1
AUDIO
Getting started
9
Select a recording media
12
using K / L buttons.
REC SPEED
Connections
record using K / L buttons,
then press B button.
POWER
Recording
Timer recording (cont’d)
Hints for timer recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.
Please insert a recordable disc.
• If a tape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and timer
recording cannot be performed. Please insert a recordable tape.
• When all the timer recording is completed, the
indicator flashes.To play or eject the recorded disc (or the tape),
press POWER button first, and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A) button.
• The timer recording is not performed in DVD and VCR at the same time. If you set two programmings with the same
channel and time both in DVD and VCR, the programming that has priority will be recorded.
indicator is on the front display), any operations on the unit will not be
• During timer recording or timer standby (
available.To make these operations available, cancel the timer recording or timer standby first (
indicator disappears).
• To cancel the timer standby mode, press POWER button.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority.
A timer recording of lower priority will be canceled, start from the middle, or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When the starting time is same:
A program set previously (PROG.A) has priority.
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. B) has priority.
ex. 2
ex.1
PROG. A
PROG. A
PROG. B
PROG. B
PROG. C
Actual
recording
PROG. A
PROG. B
Actual
recording
PROG. A
PROG. B
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to be recorded.
PROG. A
PROG. B
Actual
recording
PROG. B
PROG. A
When the recording time is entirely overlapped:
PROG. A will not be recorded.
PROG. A
PROG. B
Actual
recording
PROG. B
When the end time of the programming currently being recorded and the starting time
of the one to be recorded sequentially are same:
The first 20-90 seconds of the programming to be recorded sequentially will be cut off.
PROG. A
PROG. B
Actual
recording
PROG. A
PROG. B
The first 20-90 seconds will be cut off.
36
Note:
After finishing the timer
recording in DVD, other
timer programmings
cannot be performed for
a while.
Recording
Connection to an external source
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
S-VIDEO input is useful only in DVD mode.
L
OUTPUT
Another source
(VCR camcorder etc.)
VIDEO AUDIO
R
S -VIDEO
VIDEO AUDIO
R
L
or
or
Video
cable
S-Video
cable
Audio
cable
Video
cable
Audio
cable
DVD
S-VIDEO
Getting started
S-Video
cable
Connections
OUTPUT
S- VIDEO
DVD/VCR
AUDIO IN
L
or
S-VIDEO
VIDEO
R
IN
VIDEO IN
L - AUDIO - R
To LINE 1 IN
To LINE 2 IN
Before you start
Settings for an external source
OPEN/CLOSE
DIGITAL
AUDIO
AUDIO OUT OUT
POWER
REW
F.FWD
STOP/EJECT
PLAY
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
DVD
S-VIDEO
COMPONENT
VIDEO OUT
RECORD
Y
CB
L
COAXIAL
VCR
SELECT
IN
R
S-VIDEO
VIDEO
OUT
Rear of this unit
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video”, then press ENTER
button.
Setup > Select Video
DVD
L1 (Rear)
Video In
L1 (Rear)
Video In
L2 (Front)
Video In
L2 (Front)
Video In
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
Setup > Select Video
DVD
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
5. Select the input jack type to connect, then
press ENTER button.
If you want to use S-VIDEO INPUT, select “S-Video In”.
If you want to use VIDEO INPUT (Composite),
select “Video In”.
Setup > Select Video
DVD
Video In
L1 (Rear)
S-Video In
L2 (Front)
S-Video In
L2 (Front)
Video In
37
Others Español
L1 (Rear)
VCR functions
5. Select the input jack type to connect, then
press ENTER button.
If you want to use S-VIDEO INPUT, select “S-Video In”.
If you want to use VIDEO INPUT (Composite),
select “Video In”.
Setup > Select Video
Changing the SETUP menu
Setup > Select Video
4. Select “L1 (Rear)”, then press ENTER button.
Editing
4. Select “L2 (Front)”, then press ENTER button.
Playing discs
DVD
R
Recording
Front of this unit
Setup > Select Video
R
CR
OUT
L - AUDIO - R
1. Press SETUP button to display SETUP/DISC
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video”, then press ENTER
button.
DVD/VCR
AUDIO IN AUDIO OUT ANTENN
IN
L
L
VIDEO IN VIDEO OUT
DVD
Recording
Settings for an external source (cont’d)
Recording from an external source
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
Before recording from an external source, see the instruction for the connection on page 37.
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
DVD
4
1
2. When you want to record to the disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
2
CH
VIDEO/TV
SLOW
0
DISPLAY
This operation may take a while to be recognized.
VCR
When you want to record to the tape: Press:
Insert the tape with a safety tab into the cassette compartment.
3. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select “L1” position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L buttons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 26 for DVD or page 94 for VCR.
XP
SP
LP
SP
SEP
SLP
DVD mode
SLP
EP
VCR mode
5. Press REC/OTR button on the unit to start recording.
6. Press PLAY button on the external source to record from.
7. For disc:
Press STOP C button on the unit to stop recording.
This operation may take a while to be completed.
For tape:
Press STOP/EJECT C A button on the unit to stop recording.
38
VCR
DVD
3
PAUSE
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
7
Recording
Before you start
Dubbing Mode
DVD-R
Video
VR
DVD-RW
DVD-RW
VCR
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
1
STOP
REC/OTR
SETUP
3
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Setup > Recording
DVD-RW Recording Format
Auto Chapter
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
SKIP
SKIP
2
3
4
DVD
Video mode
10 minutes
VCR
Playing discs
Timer Programming
Dubbing Mode
DVD
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Editing
4
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
Setup Menu
DVD-RW Recording Format
Auto Chapter
VCR
DVD
Video mode
OFF
Timer Programming
Dubbing Mode
VCR
DVD
39
Others Español
Instructions continue on page 40.
VCR functions
For VCR to DVD duplication:
• After start VCR to DVD duplication, the picture may be distorted because of the auto
tracking function.
This in not a malfunction. Be
advised that playback the tape
until the picture is stabilized,
then set the starting point
which you wish to start
recording, and start VCR to
DVD duplication.
Changing the SETUP menu
Note
Setup > Recording
Recording
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
RETURN
Getting started
PLAY
Playback Setting
Make sure:
• Insert a disc and a tape with a
safety tab.
Note for recording to a tape:
• The tape's record tab is intact.
• The videotape is long enough to
record the DVD disc.
Note for recording to a disc:
• The DVD disc is satisfied with
the recording status. Refer to
pages 26-42.
POWER
Connections
You can copy a DVD disc to a
videotape or copy a videotape to
a DVD disc.This function will be
possible only if the DVD disc or
the tape is not copy protected.
Before starting this function, prepare for the recording on the
DVD-R/RW disc or the videotape.
Refer to pages 26-42, 94.
2
Recording
Dubbing Mode (cont’d)
VCR to DVD
DVD to VCR
5-a
5-b
Select “VCR ⇒ DVD” using K
/ L buttons, then press
ENTER button.
Select “VCR ⇐ DVD” using K
/ L buttons, then press
ENTER button.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
AUDIO
OPEN/CLOSE
DEF
SPACE
7-a
7-b
CH
VIDEO/TV
SLOW
0
DVD-RW Recording Format
Auto Chapter
VCR
DVD
Video mode
OFF
Timer Programming
Dubbing Mode
Setup > Recording
DVD-RW Recording Format
Auto Chapter
VCR
Dubbing Mode
Video mode
OFF
VCR
VCR DVD
DVD
VCR DVD
6-a
6-b
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C-RESET ZOOM
SEARCH
MODE
6-a
6-b
Press SETUP button to exit
SETUP menu.
Make sure to select a recording
speed using REC SPEED button.
Press:
Press SETUP button to exit
SETUP menu.
Press:
7-a
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
8-a
Press DUBBING button on
the front of the unit.
VCR to DVD duplication will start.
9-a
Press STOP C button on the
unit or STOP C button on
the remote control to stop
the recording.
9-a
9-b
PLAY
5-a
5-b
RETURN
MENU/LIST TOP MENU
VCR
PAUSE
DVD
Timer Programming
VCR
VCR DVD
DVD
VCR DVD
DVD
VCR
DISPLAY
Setup > Recording
SKIP
SKIP
CM SKIP
VCR
Make sure to select a recording
speed using REC SPEED button.
Press:
7-a
DVD
7-b
OPEN/CLOSE
7-b
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
POWER
REW
F.FWD
STOP/EJECT
PLAY
RECORD
CHANNEL
DUBBING
VCR
9-b
SELECT
SELECT
STOP
Note
Press DUBBING button on
the front of the unit.
DVD to VCR duplication will start.
• When you turn off the unit
after set the Dubbing Mode
to
, the setting
will be set to
automatically.
• Dubbing Mode is available
only if the tape or disc is not
copy protected.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
Press STOP/EJECT C A button on the unit or STOP C
button on the remote control
to stop the recording.
For VCR to DVD duplication:
• The playback sound mode is
followed by the setting of
VCR playback sound mode on
page 96. Set the playback
sound mode to which you
wish to record to the DVD.
40
R
8-a 9-a
8-b
8-b
9-b
PLAY
DVD
Recording
Before you start
Finalizing the discs
DVD-R
Video
VR
DVD-RW
DVD-RW
You will need to finalize the discs
recorded in Video mode to play in
other DVD players.
Finalizing discs in Video mode
automatically create title menus.
Disc
Format
REC SPEED
Finalize
.@/:
1
ABC
2
3
GHI
JKL
MNO
Disc Protect OFF ON
Yes
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
No
7
OPEN/CLOSE
Connections
POWER
Edit
SPACE
CH
VIDEO/TV
SLOW
0
1
VCR
DISPLAY
* VR mode only
4
PLAY
STOP
Select “Yes” using { / B buttons, then press ENTER button.
Finalizing will start.
REC/OTR
1
CLEAR/C-RESET ZOOM
Do you want to cancel?
Yes
No
SKIP
SKIP
• Once you have finalized a disc
recorded in Video mode, you
cannot edit or record anything else on that disc.
A VR mode disc can still be
recorded and edited on this
unit even after finalizing.
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
58%
Format
Finalizing
Finalize
Editing
Edit
Disc
Disc Protect OFF ON
Edit
Select “Yes”, then press
ENTER button.
Finalizing is cancelled, then the
unit will be in stop mode.
5
To release the finalizing for
the disc, select “Undo
Finalize” at step 3.
• If
appear when pressing
STOP button, you cannot cancel finalizing because the finalizing has been in certain
progress.
When selecting “No” and
press ENTER or RETURN
button, finalizing will be continued.
You cannot cancel finalizing
the DVD-R disc when it has
been started.
This operation may take a
while to be completed.
41
Others Español
100%
Finalizing
Undo Finalize
VCR functions
Finalizing is complete.
Format
Changing the SETUP menu
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
CM SKIP
RETURN
Playing discs
To cancel finalizing, press STOP C
button.
Disc
3
ENTER
MENU/LIST TOP MENU
4
2
3
4
Recording
58%
Finalizing
* VR mode only
TIMER PROG.
Note
Setup Menu
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
Video mode:
SETUP
REC MONITOR
SEARCH
MODE
2
PAUSE
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
DVD
Recording
Setting a disc to protect
VR
DVD-RW
To prevent accidental recording,
editing, or erasing the titles, you
can protect them from DISC
menu.
3
Select “Disc Protect OFF ➔
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
1
AUDIO
DEF
SPACE
DISPLAY
SLOW
DVD
VCR
Finalize
PLAY
Disc Protect OFF
ON
STOP
Yes
No
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C-RESET ZOOM
4
SEARCH
MODE
Select “Yes” using { / B buttons, then press ENTER button.
A disc will be protected.
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
58%
Writing to Disc
Edit
Format
Finalize
Disc Protect OFF ON
42
PAUSE
Format
MENU/LIST TOP MENU
Disc
VIDEO/TV
Edit
1
Setup Menu
CH
0
Disc
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
This operation may take a
while to be completed.
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Playing discs
Before you attempt to play DVD discs, read the following information.
Region codes
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as
described below. Discs that have the following logos
will play on the unit. Other Disc types are not guaranteed to play.
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on the unit.
You cannot play DVDs that are labeled for other
regions. Look for the symbols below on your DVDs.
If these region symbols do not appear on your
DVD, you cannot play the DVD in this unit.
Disc
Logo
DVD-R (VIDEO FORMAT)
CD-DA (AUDIO CD)
Hint for DVD playback
CD-RW (CD-DA FORMAT, MP3 files)
Start Rec.
Stop/Start
Stop Rec.
Playing discs
The contents of DVD disc are generally divided into
some titles.Titles may be further subdivided into
chapters.
CD-R (CD-DA FORMAT, MP3 files)
Recording
The number inside the globe refers to region of the
world. Region 1 represents the United States,
Canada, Bermuda, the U.S.Virgin Islands, and small
regions near Australia.
A DVD labeled for a specific region can only play on
the unit with the same region code.
DVD-RW (VIDEO/VR FORMAT)
Getting started
DVD VIDEO
Connections
Playable discs
Before you start
Information on DVD play
Color systems
Title 1
Title 2
Editing
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Changing the SETUP menu
DVDs are recorded in different color systems
throughout the world.The most common color systems are NTSC (which is used primarily in the
United States and Canada), PAL, and SECAM.
This unit uses NTSC, so DVDs you play must be
recorded in the NTSC system.You cannot play
DVDs recorded in other color system.
Guide to displays
First:
DVD
4
1
00:00:00
DVD-RW
Video mode
SP 1:25 Rem.
5
CH 1
2
3
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
43
Others Español
1
1
: Search
VCR functions
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
1. Indicates a disc type and a
format mode.
2. Indicates a recording speed
and possible recording time.
3. Indicates a current channel
number.
4. Indicates a title number, chapter number, and the time
elapsed of disc play.
5. Each icon means:
Playing discs
Basic playback
Playback
DVD-R
Video
VR
DVD-RW
DVD-RW
VR mode:
Original
1
1
1
2
3
1
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
Press POWER button, then
press DVD button.
When you are playing a DVD, turn
the TV on and be sure to select
the input to which the unit is connected.
JAN/1 12:00AM
4
JAN/1 1:00AM
JAN/1 2:00AM
JKL
5
6
TUV
WXYZ
8
9
2
6
CH
MNO
4
PQRS
7
5
OPEN/CLOSE
VIDEO/TV
SPACE
SLOW
0
JAN/1 3:00AM
JAN/1 4:00AM
MENU / LIST button
1
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
JAN/1 12:00AM
4
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
5
6
PAUSE
STOP
REC/OTR
SETUP
4
4
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
JAN/1 3:00AM
DVD
PLAY
Playlist
2
VCR
DISPLAY
RETURN
SKIP
5
SKIP
CM SKIP
JAN/1 4:00AM
3
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
5
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playback will start.
6
disc
tray
guide
Press STOP C button to stop
playback.
Note
This operation may take a
while to be recognized.
To eject the disc, press
OPEN/CLOSE A button to open
the disc tray, then remove the disc
before turning the unit off.
• For DVD-R (Video mode)
and DVD-RW (Video mode)
discs which are already finalized, a title list will be displayed instead of thumbnails.
4
Press TOP MENU button to
display the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU / LIST button.
Video mode:
Title Menu
1 JAN/1
12:24AM
CH96
XP
2
3
4
5
6
7
8
Title List
1
JAN/1 12:00AM
4
JAN/1 3:00AM
44
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
5
JAN/1 4:00AM
• You can resume play from
where you stopped playing
the disc. (Resume play)
Refer to page 46 for details
about resume play.
• Some discs may start playing
automatically.
Playing discs
DVD-V
CD
MP3
1
Press POWER button, then
ton to open the disc tray.
The disc tray will open.
1
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
If you are playing a DVD-Video
disc, a menu may appear.
Refer to pages 46-47 for details
about a disc menu.
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
2
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
5
Press STOP C button to stop
STOP
REC/OTR
playing.
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
3
Place the disc onto the disc
SEARCH
MODE
SKIP
SKIP
CM SKIP
Note
• Some discs may start playing
automatically.
Playing discs
For MP3 playback
1
In stop mode, press TOP MENU
button to call up the MP3 menu.
DISC NAME
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
Editing
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
• Folders are accompanied by
icon.
List of MP3 Files
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
1/ 2
• To exit the menu, press TOP
MENU button again.
desired folder (group) or track,
then press ENTER button.
When selecting track:
Playback will start.
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
2
2
2
CM SKIP
Note
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT deck.
• Files whole extension is other
than “.mp3 (MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the
recording status.
45
Others Español
When selecting the folder:
The files in folder will appear.
Press K or L button to select the
track or folder you want, then
press ENTER button.
This unit recommends the files
recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 112kbps - 320kbps.
STOP
REC/OTR
VCR functions
2
Press K / L buttons to select a
• MP3 files are accompanied by icon.
Reproduction will start from the
selected track and go to the
next one in turn.
• The system can recognize up to 255
groups (or folders) and up to 255 tracks.
• The name of group and track can
be displayed in up to 32 characters. Unrecognizable characters
will be replaced with asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
Changing the SETUP menu
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
• Press s button or RETURN
button to the previous hierarchy.
• Press STOP C button to return
to the first item.
Recording
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
4
5
Getting started
2
Press OPEN/CLOSE A but-
playing.
Playback will start.
Connections
press DVD button.
When you are playing a DVD or
an audio CD, turn the TV on and
be sure to select the input to
which the unit is connected.
4
Press PLAY B button to start
Before you start
Basic playback (cont’d)
Playing discs
Basic playback (cont’d)
Playing discs using the disc menu
DVD-V
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the playback. For example, the menu may
offer choices for subtitle languages, special features, or chapter
selection.
Sometimes these are displayed
automatically when you start playback, otherwise only appear when
you press MENU / LIST button.
First:
DVD
1
Press MENU / LIST button.
The DVD main menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
MENU / LIST button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
K / L / { / B buttons:
Moves the cursor around screen.
2
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
1
2
3
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
button after.)
3
Press MENU / LIST button to
exit the menu.
Note
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
46
2
Playing discs
Before you start
Basic playback (cont’d)
Playing discs using the title menu
DVD-V
DVD
Press TOP MENU button.
The title menu will appear.
If the feature is not available,
may appear on the TV screen.
Select a title to play using the
K / L / { / B buttons, then
press ENTER button.
Playback will begin at the title you
selected.
2
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
TOP MENU button:
Displays the ‘Title menu’ of a
DVD disc which varies with the
disc.
VCR
DVD
PLAY
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
2
SKIP
CM SKIP
Recording
Enter button:
Selects the currently highlighted
menu option.
1
2
3
TIMER PROG.
ENTER
REC MONITOR
K / L / { / B buttons:
Moves the cursor around screen.
PAUSE
Getting started
1
2
Connections
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start playback at a specific title.
First:
Playing discs
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
button after.)
3
Press TOP MENU button to
exit the title menu.
Editing
Changing the SETUP menu
VCR functions
Note
47
Others Español
• The TOP MENU button will
not always active with all
DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs
Special playback
Resume play
Video
DVD-V
DVD-R
DVD-RW
2
VR
CD
DVD-RW
MP3
Press PLAY B button.
In a few seconds, playback will
resume from the point at which it
stopped last.You can resume play
at the same point even if you turn
off the unit.
You can resume play from where
you stopped playing the disc last.
1
During playback, press STOP
C button.
The resume message will appear.
Screen:
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the playback is stopped.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
SEARCH
MODE
2
1
2
SKIP
SKIP
CM SKIP
Note
Resume ON
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Fast forward / Fast reverse
DVD-V
DVD-R
Video
VR
DVD-RW
DVD-RW
CD
MP3
1
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
During playback, press D or E button.
Every time you press D or E button, approximate speed will be
changed as follows.
g
g
x40
h
x20
h
g
x5
h
Normal
speed
playback
g
h
g
x2
h
g
x20
h
x40
SPACE
48
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
STOP
REC/OTR
SETUP
REC MONITOR
For Audio CDs, approximate speed is fixed at x8 with sound.
For MP3 files, approximate speed is fixed at x8.
To return to the normal playback, press PLAY B button.
OPEN/CLOSE
MENU/LIST TOP MENU
TIMER PROG.
1
1
ENTER
RETURN
Note
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
Playing discs
Before you start
Special playback (cont’d)
Skipping TV commercials during play
DVD-R
Video
VR
DVD-RW
DVD-RW
e.g. Press CM SKIP button once
7
8
9
SPACE
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded programs without interrupting.
SLOW
0
VCR
DISPLAY
DVD
PAUSE
Connections
PLAY
STOP
REC/OTR
CM Skip
30 sec.
1
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
(forwarding 30 seconds.)
SEARCH
MODE
RETURN
SKIP
SKIP
Getting started
During playback, press CM
SKIP button.
Normal playback will start at 30
seconds ahead from the point you
press CM SKIP button.
Every time you press CM SKIP
button, searching point will be
extended by 30 seconds ahead.
You can press up to 6 times (180
seconds).
CM SKIP
1
Recording
B
Playback will restart automatically.
Playing discs
Pause
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
CD
MP3
1
2
Press PLAY B button to
resume play.
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
2
VCR
DVD
PAUSE
1
Editing
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
POWER
PLAY
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
Changing the SETUP menu
STOP
REC/OTR
RETURN
SKIP
SKIP
CM SKIP
VCR functions
Others Español
49
Playing discs
Special playback (cont’d)
Step by step playback
Video
DVD-V
DVD-R
DVD-RW
2
VR
DVD-RW
1
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
SPACE
SLOW
0
VCR
DISPLAY
Press SKIP G button
repeatedly.
The playback will advance one
frame (or step) at a time when
you press the skip button with
the sound muted.
DVD
PAUSE
PLAY
1
3
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
To play step by step backward:
Press SKIP H button repeatedly.
Every time you press the button,
the playback will go backward by
one frame.
SEARCH
MODE
SKIP
SKIP
CM SKIP
2
3
Press PLAY B button to
resume play.
Slow forward / Slow reverse play
DVD-V
DVD-R
Video
VR
DVD-RW
DVD-RW
1
During playback, press PAUSE k button, then press D or E
button.
Every time you press D or E button, approximate speed will be
changed as follows.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
g
g
x1/4
h
x1/8
h
g
x1/16
g
Pause
h
h
g
x1/16
h
VCR
DVD
PAUSE
g
x1/8
h
x1/2
PLAY
1
STOP
REC/OTR
SETUP
To return to the normal playback, press PLAY B button.
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
1
1
1
ENTER
RETURN
Note
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/2:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
50
Playing discs
Zoom
STOP
REC/OTR
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
During playback, press
ZOOM button.
Zoom menu will appear.
Screen:
1
x1.2
01:23:45
x1.5
1
SEARCH
MODE
3
2
3
CM SKIP
Select a desired zoom position
using K / L / { / B buttons, then
press ENTER button.
The zoom play will start.
• When selecting a smaller factor
than the current one, the zoom
area will not be displayed.
• To remove the zoom menu, press
ZOOM button again at step 1.
• To cancel the zoom function,
select x1.0 using { / B buttons,
then press ENTER button.
Marker Setup
DVD-RW
Screen for DVD:
1
VR
1
DVD-Video
01:23:45
CD
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
1
2
3
4
5
6
7
This feature allows you to assign
a specific point on a disc to be
called back later.
SPACE
OPEN/CLOSE
Playing discs
Video
CH
VIDEO/TV
SLOW
0
1
DISPLAY
DVD
VCR
PAUSE
Editing
1
PLAY
STOP
REC/OTR
Screen for CD:
1
1
01:23:45
2
3
4
5
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Audio CD
CLEAR/C-RESET ZOOM
1
1
01:23:45
SETUP
6
SEARCH
MODE
DVD-Video
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Note
2
4
To return to the marker later,
select the desired marker
number using { / B buttons,
then press ENTER button.
Others Español
Select
icon using { / B
buttons, then press ENTER
button.
Marker setup menu will appear.
ber using { / B buttons.
When reaches the desired
point, press ENTER button.
VCR functions
3
Select a desired marker num-
• To clear a marker, select the
marker number to be cleared,
then press CLEAR/C-RESET
button.
• All markers will be erased
when you operate these operations listed below.
– Opening the disc tray.
– Turning off the power.
– Recording to a recordable
disc.
– Changing the mode between
Original and Playlist.(VR mode)
•You can mark up to 6 points.
51
Changing the SETUP menu
During playback, press DISPLAY button.
The display menu will appear.
Screen:
Recording
There are four options
(x1.0,x1.2,x1.5 and x2.0), these
are displayed excluding the current zoom rate.
DVD-RW
SKIP
Note
x2.0
DVD-R
SKIP
DVD-Video
B
DVD-V
RETURN
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
Getting started
1
to zoom using { / B buttons,
then press ENTER button.
The zoom area will be displayed.
TIMER PROG.
ENTER
REC MONITOR
Connections
1
2
Select a desired zoom factor
SETUP
Before you start
Special playback (cont’d)
Playing discs
Search
Title/Chapter search
Video
DVD-V
DVD-R
DVD-RW
VR
DVD-RW
Using SKIP H / G buttons
Using DISPLAY button
1
1
During playback, press SKIP
G button to skip the current title or chapter and
move to the next.
The title or chapter will move
forward by one at a time.
During playback, press DISPLAY button.
The display menu will appear.
Screen:
2
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
VCR
DVD
PAUSE
PLAY
1
1
01:23:45
STOP
DVD-Video
REC/OTR
SETUP
TIMER PROG.
ENTER
MENU/LIST TOP MENU
2
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title will be highlighted.
Title:
Enter a desired title number
to search using K / L buttons
or number buttons, then
press ENTER button.
Title search will start.
Chapter:
To move to ‘C’ for chapter, press
B button.
Enter a desired chapter number to search using K / L buttons or number buttons, then
press ENTER button.
Chapter search will start.
52
OPEN/CLOSE
DEF
REC MONITOR
To go back to the previous title
or chapter, press SKIP H button.The title or chapter will move
backward one title at a time.
AUDIO
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
1
Playing discs
Before you start
Search (cont’d)
Track search
CD
MP3
Using SKIP H / G buttons
Using DISPLAY button
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
01:23:45
Audio CD
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
VCR
DISPLAY
1
DVD
PAUSE
PLAY
STOP
To go back to the previous track,
press SKIP H button.The track
will move backward by one at a
time.
REC/OTR
SETUP
2
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for track will be highlighted.
SEARCH
MODE
SKIP
SKIP
CM SKIP
2
3
1
Getting started
1
During playback, press SKIP
G button to skip the current track and move to the
next.
The track will move forward one
track at a time.
POWER
Connections
1
Recording
3
Playing discs
Enter a desired track number
to search using K / L buttons
or number buttons, then
press ENTER button.
Track search will start.
DVD-R
DVD-RW
REC SPEED
AUDIO
VR
CD
DVD-RW
1
During playback, press DISPLAY button.
The display menu will appear.
Screen for DVD:
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
01:23:45
DVD-Video
1
01:23:45
Audio CD
7
SPACE
Enter a desired time to
search using K / L buttons or
number buttons, then press
ENTER button.
Time search will start.
VIDEO/TV
SLOW
0
DISPLAY
1
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
2
3
• Time search function is available only in the same track or
title.
ENTER
REC MONITOR
3
Screen for CD:
PQRS
Others Español
1
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title or track will be highlighted.
To move to the clock icon, press
B button.
CH
VCR functions
1
2
OPEN/CLOSE
Changing the SETUP menu
POWER
Video
DVD-V
Editing
Time search
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Note
53
Playing discs
Repeat/Random/Program play
Repeat play
Video
DVD-V
DVD-R
DVD-RW
VR
CD
DVD-RW
MP3
1
During playback, press DISPLAY button.
The display menu will appear.
1
1
01:23:45
DVD-Video
Title:
The current title will be played
repeatedly. (DVD only)
Chapter:
The current chapter will be played
repeatedly. (DVD only)
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
DEF
SPACE
icon using { / B buttons, then press ENTER button.
Repeat menu will appear.
Screen:
1
1
01:23:45
DVD-Video
OFF
Title
Chapter
A-B
3
Select a desired option to
repeat using K / L buttons,
then press ENTER button.
The selected repeat play will start.
CH
VIDEO/TV
SLOW
0
All:
The current disc will be played
repeatedly. (CD, MP3, DVD-RW
(VR mode) only)
DVD
VCR
DISPLAY
1
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
2
Select
OPEN/CLOSE
A-B:
The A-B point will be played
repeatedly.
When pressing ENTER button
while A-B is highlighted, the starting point (A) will be decided.
CLEAR/C-RESET ZOOM
SEARCH
MODE
SKIP
SKIP
2
3
CM SKIP
Press ENTER button again to
select the ending point (B).
Track:
The current track will be played
repeatedly. (CD, MP3 only)
Group:
The current group will be played
repeatedly. (MP3 only)
Note
• The A-B Repeat playback can
only be set with in the current title (for DVDs), or current track (for Audio CDs).
• To cancel the repeat playback,
select OFF at step 2.
• You cannot select “Group”
during the random playback
of MP3 files.
Random play
CD
MP3
With this function, you can play a
disc randomly instead of playing in
the original order.
First:
DVD
1
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
Setup Menu
54
PQRS
2
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
7
TUV
WXYZ
8
9
SPACE
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
CD Playback Mode
MENU/LIST TOP MENU
Random Play
Program Play
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
2
3
CM SKIP
3
Select “Random Play” using
Note
K / L buttons, then press
ENTER button.
Random playback will start.
• To cancel random playback,
press STOP C button twice
during random playback.
Playing discs
Before you start
Repeat/Random/Program play (cont’d)
Program play
CD
DVD
1
3
Select “Program Play” using
K / L buttons, then press
ENTER button.
Program play list will appear.
4
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
SLOW
0
CD Playback Mode > Program Play
DISPLAY
VCR
DVD
5
PLAY
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
Total
00:00:00
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Select a desired track using K
/ L buttons, then press
ENTER button or B button.
A cursor will move to the next.
Playing discs
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
CD Playback Mode > Program Play
07 - - - - - - - - - - - - - - - -
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- --
---
Total
Recording
4
2
PAUSE
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Setup Menu
CH
VIDEO/TV
Getting started
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
OPEN/CLOSE
Connections
You can program the disc to play
in your desired order.
First:
00:04:30
CD Playback Mode
Editing
Random Play
Program Play
5
Changing the SETUP menu
Press PLAY B button to start
program playback.
Program playback will start.
Note
Others Español
55
VCR functions
• To erase tracks you selected,
press CLEAR/C-RESET button.
• You can make program settings up to 50.
• To cancel program playback,
press STOP C button twice
during program playback.
• You may also select a desired
track using Number buttons
at step 4.
Playing discs
Selecting the format of audio and video
You can select an audio and video format as you prefer depending on
the contents of the disc you are playing.
Switching audio soundtrack
VR
DVD-V
DVD-RW
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them anytime
during playback.
On DVD-RW discs recorded in
VR mode, you can switch to main
(L), sub audio (R) or a mix of
both (L/R).
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
<DVD-RW VR mode>
1
1
00:00:00
1 Dolby Digital Dual L/R
2 Dolby Digital 2ch ----
1
00:00:00
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
56
DVD-Video
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
AUDIO
OPEN/CLOSE
DEF
CH
VIDEO/TV
SLOW
0
DISPLAY
1
3
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
<DVD-Video>
Audio soundtrack will switch.
<DVD-RW VR mode>
00:00:00
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
1
1 Dolby Digital Dual
2 Dolby Digital 2ch
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
<DVD-Video>
REC SPEED
SPACE
DVD-Video
2
POWER
7
1
1
DVD-RW
VR Original
DVD-RW
VR Original
CM SKIP
RETURN
SKIP
SKIP
2
3
4
L/R
L
R
4
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
Note
• Some discs will only allow
you to change the soundtrack from the disc’s menu.
Press TOP MENU button or
MENU / LIST button to display the disc’s menu.
• On DVD-RW discs recorded
in VR mode that may have
both a main and a sub audio
channel, you can switch to
main (L), sub audio (R), or a
mix of both (L/R).
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
Playing discs
Before you start
Selecting the format of audio and video (cont’d)
CD
MP3
1
2
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
When playing Audio CDs or MP3
files you can switch between
stereo, just the left channel or
just the right channel.
SPACE
CH
VIDEO/TV
SLOW
0
1
Audio CD
00:00:00
1
3
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
DVD
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
00:00:00
PAUSE
RETURN
Audio CD
CLEAR/C-RESET ZOOM
L/R
L
R
SEARCH
MODE
SKIP
SKIP
2
3
CM SKIP
Recording
Playing discs
Switching subtitles
VR
DVD-V
DVD-RW
2
Select
icon using { / B
buttons, then press ENTER
button.
Subtitle menu will appear.
1
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
1
1
1
00:00:00
DVD-Video
SLOW
DVD
1
01:23:45
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
DVD-Video
CLEAR/C-RESET ZOOM
Select a desired subtitle language using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
SKIP
Note
• Some discs will only allow
you to change the subtitle
from the disc’s menu. Press
TOP MENU button or MENU
/ LIST button to display the
disc’s menu.
57
Others Español
When selecting “OFF,” subtitle will
disappear.
SKIP
CM SKIP
VCR functions
3
SEARCH
MODE
2
3
Changing the SETUP menu
OFF
1 English
2 Japanese
VCR
MENU/LIST TOP MENU
1
CH
VIDEO/TV
0
DISPLAY
During playback, press DISPLAY button.
The display menu will appear.
Screen:
OPEN/CLOSE
Editing
Many DVD Video discs have subtitles in one or more languages –
the case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
Getting started
During playback, press DISPLAY button.
The display menu will appear.
Screen:
VCR
DISPLAY
Playing discs
Selecting the format of audio and video (cont’d)
Switching camera angles
DVD-V
Some DVD Video discs feature
scenes shot from two or more
angles–check the case for details:
it should be marked with an angle
icon if it contains multi-angle
scenes.
2
Select
icon using { / B
buttons, then press ENTER
button.
Angle will switch each you press
ENTER button.
1
01:23:45
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
1
1
REC SPEED
7
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
POWER
VCR
DISPLAY
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
DVD-Video
RETURN
CLEAR/C-RESET ZOOM
SEARCH
MODE
SKIP
2
SKIP
CM SKIP
Angle icon appears when a switching camera angle is available.
Reducing block noise
Video
DVD-V
DVD-R
DVD-RW
1
VR
1
00:00:00
DVD-RW
OFF
Type 1
Type 2
1
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
DVD-Video
2
Select
icon using { / B
buttons, then press ENTER
button.
NR menu will appear.
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
DVD
VCR
PAUSE
PLAY
STOP
3
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
58
POWER
DVD-Video
This function reduces noise in the
playback picture.When playing
back discs recorded in long time
mode such as SLP or SEP mode,
select "Type 1" or "Type 2".
("Type 2" is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select "OFF".
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
Editing
Editing discs in Video mode
Title list allows you to check the titles recorded on
the disc easily.You can choose a title to play from this
screen and easily edit the titles as you prefer.
You can edit discs in Video mode for the following items.
Be sure that once you edit titles, they will not remain as
recorded originally.
• Deleting titles (Refer to page 61)
• Putting names on titles (Refer to pages 62-63)
• Setting or clearing chapter markers (Refer to page 64)
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
JAN/1 5:00AM
JAN/1 6:00AM
4
JAN/1 4:00AM
1
Note
2
7
• Once a disc is finalized, then editing the disc or
recording to the disc will not be available.
(Except DVD-RW discs in VR mode.)
• A playlist is not available with the DVD-R discs
and DVD-RW discs in Video mode.
Getting started
1
Connections
Guide to a title list
Before you start
Information on disc editing
Disc > Edit > Original
JAN/1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Recording
1
XP
0:01:25
6
5
Playing discs
8 3
4
Editing
1. Titles recorded on the disc can be selected to
edit by pressing ENTER button with the cursor
on the title.
2. Protect icon, which appears when the title has
been protected.
3. The selected title thumbnails from the title list.
4. The menus in here for editing titles as you prefer.The available menus depends on the disc
type and the format type.
5. The details of the title, which can be changed to
the title name you will edit.
6. Time status bar of the title.
7. The arrow icon, which means the title list
includes a next or a previous page. Press B or
{ button by following direction of the icon.
8. Playback status of the current disc.
Changing the SETUP menu
VCR functions
Others Español
59
Editing
Information on disc editing (cont’d)
Editing discs in VR mode
For discs in VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Editing original titles
Editing playlists
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 65)
• Deleting parts of titles (Refer to pages 66-67)
• Putting names on titles (Refer to pages 67-68)
• Setting or clearing chapter markers (Refer to
pages 69-70)
• Setting pictures for thumbnails (Refer to pages
70-71)
• Setting titles to protect (Refer to pages 72-73)
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 74)
• Deleting parts of titles (Refer to pages 75-76)
• Putting names on titles (Refer to pages 76-77)
• Setting or clearing chapter markers (Refer to
pages 78-79)
• Setting pictures for thumbnails (Refer to pages
79-80)
• Adding titles to a playlist (Refer to page 81)
• Deleting a playlist (Refer to page 82)
Note
• Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer. (Refer to pages 74-82)
60
Editing
Before you start
Editing DVD-RW discs in Video mode
Deleting titles
Video
DVD-RW
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
3
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
DISPLAY
1
CH
VIDEO/TV
SLOW
VCR
DVD
PAUSE
PLAY
XP
1
6
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
Playing discs
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
Yes
2
JAN/ 1 1:00AM CH12
Recording
4
TIMER PROG.
ENTER
REC MONITOR
Getting started
Title Delete
Edit Title Name
Chapter Mark
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Finalize
2
JKL
Disc > Edit
0:01:25
Format
ABC
GHI
OPEN/CLOSE
0
JAN/ 1 1:00AM CH12
Edit
.@/:
1
AUDIO
SPACE
1
Disc
REC SPEED
7
DVD
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
POWER
Connections
You can delete titles which you
do not need anymore.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
When the last title in the title list
in Video mode is deleted, the disc
space to record will be increased.
First:
No
XP
0:01:25
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
5
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
5
1
JAN/1 4:00AM
Changing the SETUP menu
Disc > Edit
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Title Delete
Edit Title Name
Chapter Mark
JAN/1 5:00AM
VCR functions
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
After writing to disc is completed, press SETUP button
to exit DISC menu.
61
Others Español
6
Editing
Editing DVD-RW discs in Video mode (cont’d)
Putting names on titles
Video
DVD-RW
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
DVD
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
5
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
CH
VIDEO/TV
SPACE
SLOW
0
VCR
DISPLAY
DVD
PAUSE
Disc > Edit > Edit Title Name
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ABC
abc
123
@!?
PLAY
STOP
1
REC/OTR
SETUP
1
2
3
4
5
JAN/ 1 1:00AM CH12 XP
MENU/LIST TOP MENU
0:01:25
CLEAR/C-RESET ZOOM
Disc
SEARCH
MODE
Edit
TIMER PROG.
ENTER
REC MONITOR
RETURN
SKIP
SKIP
CM SKIP
5
Format
Finalize
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Disc > Edit > Edit Title Name
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
area for entering title names
Disc > Edit
1
2
1
JAN/1 1:00AM
JAN/1 2:00AM
4
JAN/1 4:00AM
JAN/1 3:00AM
5
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
62
0
3
When you finish entering a title
name, press ENTER button.
ABC
abc
123
@!?
<space>
<space>
0
<space>
1
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
・To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
・To go on to the next entering area for letters,
press B button.
・You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in Video mode (cont’d)
6
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
Yes
No
PLAY
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
abc
Writing to Disc
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SKIP
6
SKIP
CM SKIP
Recording
This operation may take a
while to be completed.
SEARCH
MODE
RETURN
Getting started
1
7
Playing discs
After writing to disc is completed, press SETUP button
to exit DISC menu.
Editing
Changing the SETUP menu
VCR functions
Others Español
63
Editing
Editing DVD-RW discs in Video mode (cont’d)
Setting or clearing chapter markers
Video
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can set chapter markers at a
specified time you selected for
titles with more than 5 minutes.
First:
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
0:01:25
OPEN/CLOSE
DEF
PQRS
7
XP
AUDIO
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
DVD
4
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
PLAY
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
1
7
STOP
REC/OTR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
Disc > Edit
1
Edit
Format
Finalize
JAN/ 1 1:00AM CH12
TIMER PROG.
ENTER
REC MONITOR
SEARCH
MODE
Disc
SETUP
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
XP
0:01:25
5
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
1
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
Yes
4
JAN/1 4:00AM
JAN/ 1 1:00AM CH12
No
XP
0:01:25
5
JAN/1 5:00AM
6
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
64
Note
• You cannot select a time for
putting markers beyond a
length of a title.
• A chapter marker may be
delayed according to the
recording content.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original)
Deleting titles
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
DISPLAY
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
SLOW
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
VCR
DVD
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Edit
Format
Finalize
Disc Protect OFF ON
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Playing discs
Disc > Edit > Original
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Editing
6
Disc > Edit
Original
Disc > Edit > Original
1
3
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
7
5
JAN/1 5:00AM
.
After writing to disc is completed, press SETUP button
to exit DISC menu.
65
Others Español
1
JAN/1 4:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
VCR functions
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
Changing the SETUP menu
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Original
Recording
5
Disc
PAUSE
Getting started
1
CH
VIDEO/TV
0
Disc > Edit > Original
DVD
OPEN/CLOSE
Connections
When a title is deleted from an
original list in VR mode, the disc
space to record will be increased.
Be advised that the titles once
deleted cannot be brought back
to the disc.
First:
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Deleting parts of titles
VR
DVD-RW
You can delete part of a title, the
disc space to record will be
increased.
Be advised that the parts once
deleted cannot be brought back
to the disc.
First:
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
1
0:01:25
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
XP
0:00:55
6
Press ENTER button to
decide a start point, then
press ENTER button to
decide an end point.
A cursor will move to “Preview.”
You can check a preview.
3
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
66
5
JAN/1 5:00AM
6
WXYZ
8
9
<Preview>
Before
editing
Edited
CH
VIDEO/TV
SLOW
VCR
DVD
PAUSE
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
SEARCH
MODE
2
Disc > Edit > Original
5
TUV
CLEAR/C-RESET ZOOM
1
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
PQRS
MENU/LIST TOP MENU
Disc > Edit > Original
Original
DEF
PLAY
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit
3
MNO
OPEN/CLOSE
0
5
Disc Protect OFF ON
2
JKL
DISPLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Finalize
ABC
GHI
Disc > Edit > Original
1
Format
.@/:
1
AUDIO
SPACE
1
Edit
REC SPEED
7
DVD
Disc
POWER
Start point End point
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
8
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Select “Yes” using { / B buttons, then press ENTER button.
Part of a title will be deleted.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
1
SLOW
DVD
PAUSE
Disc > Edit > Original
1
No
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
XP
0:01:25
PLAY
9
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
No
XP
RETURN
MENU/LIST TOP MENU
Writing to Disc
CLEAR/C-RESET ZOOM
SEARCH
MODE
SKIP
SKIP
7
8
CM SKIP
Note
9
Putting names on titles
VR
DVD-RW
DVD
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
Editing
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
Playing discs
After writing to disc is completed, press SETUP button
to exit DISC menu.
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Recording
This operation may take a
while to be completed.
Getting started
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
CH
VIDEO/TV
0
VCR
DISPLAY
Disc > Edit > Original
OPEN/CLOSE
Connections
7
CH
VIDEO/TV
SLOW
0
DISPLAY
1
DVD
PAUSE
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
STOP
REC/OTR
SETUP
Original
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
1
2
CM SKIP
Edit
Format
Finalize
Disc Protect OFF ON
Others Español
67
VCR functions
Disc
TIMER PROG.
ENTER
REC MONITOR
Changing the SETUP menu
Disc > Edit
VCR
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
3
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
6
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
CH
VIDEO/TV
SPACE
Disc > Edit > Original > Edit Title Name
Disc > Edit > Original
VCR
DISPLAY
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
ABC
abc
123
@!?
1
JAN/ 1 1:00AM CH12 XP
JAN/1 4:00AM
JAN/1 5:00AM
DVD
PAUSE
PLAY
STOP
8
5
SLOW
0
REC/OTR
SETUP
0:01:25
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
area for entering title names
When you finish entering a title
name, press ENTER button.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
SEARCH
MODE
SKIP
SKIP
CM SKIP
7
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
Disc > Edit > Original > Edit Title Name
JAN/ 1 1:00AM CH12
CLEAR/C-RESET ZOOM
3
4
5
6
7
RETURN
XP
1
0:01:25
ABC
abc
123
@!?
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
Yes
5
No
abc
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
Disc > Edit > Original > Edit Title Name
1
ABC
abc
123
@!?
ABC
abc
123
@!?
<space>
<space>
0
<space>
1
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
0
Writing to Disc
1
This operation may take a
while to be completed.
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
JAN/ 1 1:00AM CH12 XP
0:01:25
68
・To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
・To go on to the next entering area for letters,
press B button.
・You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
1
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
5
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
JAN/1 5:00AM
OPEN/CLOSE
DEF
PQRS
7
JAN/1 4:00AM
AUDIO
CH
VIDEO/TV
SLOW
0
DISPLAY
4
VCR
DVD
PLAY
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
SEARCH
MODE
1
Disc
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
Edit
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
0:01:25
Playing discs
Format
Finalize
Disc Protect OFF ON
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
2
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc > Edit > Original
1
Chapter 1/1
Changing the SETUP menu
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
XP
Disc > Edit
0:01:25
6
3
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
69
Others Español
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
VCR functions
Original
Recording
Disc > Edit > Original
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C-RESET ZOOM
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
PAUSE
Getting started
DVD
Disc > Edit > Original
Connections
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the original list comes
to 999 in total, you cannot add
any more chapter markers.
First:
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
<Delete>:
Disc > Edit > Original
1
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
The chapter marker which you
selected will be deleted.
<Delete>:
Disc > Edit > Original
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
F
Yes
JAN/ 1 1:00AM CH12
No
1
XP
Chapter 2/2
0:01:25
Yes
• You cannot delete the first
chapter marker of each title.
7
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
<Add>:
Disc > Edit > Original
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
JAN/ 1 1:00AM CH12
PQRS
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
No
XP
Writing to Disc
PLAY
8
This operation may take a
while to be completed.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
8
SEARCH
MODE
SKIP
7
SKIP
CM SKIP
After writing to disc is completed, press SETUP button
to exit DISC menu.
No
XP
Writing to Disc
This operation may take a
while to be completed.
Setting pictures for thumbnails
VR
DVD-RW
You can set a picture to each title for
a thumbnail. It helps you to remember the contents of the title you are
playing.The beginning picture has
been selected as the default.
First:
DVD
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
Disc > Edit
1
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Original
CLEAR/C-RESET ZOOM
SEARCH
MODE
Disc
RETURN
SKIP
SKIP
1
2
CM SKIP
Edit
Format
Note
Finalize
Disc Protect OFF ON
70
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
6
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
OPEN/CLOSE
DEF
CH
VIDEO/TV
SLOW
0
DVD
VCR
PAUSE
Disc > Edit > Original
1
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
No
PLAY
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
MENU/LIST TOP MENU
RETURN
Writing to Disc
CLEAR/C-RESET ZOOM
SEARCH
MODE
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
SKIP
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Playing discs
Disc > Edit > Original
This operation may take a
while to be completed.
SKIP
Recording
4
CM SKIP
3
4
5
6
Getting started
1
2
AUDIO
SPACE
DISPLAY
1
JAN/1 4:00AM
REC SPEED
7
Disc > Edit > Original
4
POWER
Connections
3
XP
0:01:25
Editing
5
Changing the SETUP menu
Select “Index Picture Set”
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
VCR functions
F
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Others Español
71
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting titles to protect
VR
DVD-RW
To prevent accidental editing or
erasing the titles, you can protect
them from the original menu.
First:
DVD
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
1
DISPLAY
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
Disc
Edit
5
Select “Protect OFF ➔ ON”
Format
Finalize
Disc Protect OFF ON
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc > Edit > Original
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Disc > Edit > Original
1
Original
3
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
CH
VIDEO/TV
SLOW
0
Disc > Edit > Original
1
OPEN/CLOSE
DEF
SPACE
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
72
AUDIO
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
To protect a whole disc
(DVD-RW VR mode Only):
Select “Disc Protect” from Disc
menu, then select “Yes”.
DVD
VCR
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Releasing titles from protecting
VR
DVD-RW
First:
DVD
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
Connections
You are allowed to release the
titles protecting feature once protected.
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Disc Edit > Original
2
JAN/ 1 2:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
XP
0:01:25
Disc
Edit
DVD
VCR
PLAY
1
7
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
Select “Protect ON ➔ OFF”
using K / L buttons, then
press ENTER button.
Option window will appear.
SKIP
SKIP
1
2
3
4
5
6
Playing discs
2
CM SKIP
RETURN
Disc Edit > Original
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
2
B
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
Recording
5
Disc Protect OFF ON
TIMER PROG.
ENTER
REC MONITOR
Format
Finalize
PAUSE
Getting started
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
DISPLAY
No
XP
0:01:25
Disc > Edit
Editing
6
Original
Changing the SETUP menu
Select “Yes” using { / B buttons, then press ENTER button.
Disc Edit > Original
2
3
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
73
Others Español
1
Yes
JAN/ 1 2:00AM CH12
VCR functions
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Editing
Editing DVD-RW discs in VR mode (Playlist)
Deleting titles
VR
DVD-RW
In VR mode, even when a title is
deleted from a Playlist, the original
title will remain in an Original list.
The disc space to record will not
be increased.
First:
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Disc > Edit > Playlist
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
DVD
VCR
5
Select “Title Delete” using K
Edit
Format
Finalize
/ L buttons, then press
ENTER button.
Option window will appear.
Disc Protect OFF ON
Disc > Edit > Playlist
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Playlist
Original
1
3
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
Disc
74
AUDIO
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting parts of titles
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
3
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
JAN/ 1 1:00AM CH12
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
DEF
CH
VIDEO/TV
SLOW
DVD
VCR
PAUSE
PLAY
1
XP
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
0:01:25
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Playing discs
Disc > Edit > Playlist
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
XP
0:00:55
Editing
6
Disc > Edit
Changing the SETUP menu
Press ENTER button to
decide a start point, then
press ENTER button to
decide an end point.
A cursor will move to “Preview”.
You can check a preview.
Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
Add New
Title
Delete
Playlist
Edited
JAN/1 5:00AM
75
Others Español
1
5
Start point End point
Before
editing
Disc > Edit > Playlist
4
<Preview>
VCR functions
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Recording
5
Disc Protect OFF ON
2
JKL
OPEN/CLOSE
Getting started
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Finalize
ABC
GHI
7
Disc > Edit > Playlist
1
Format
.@/:
1
AUDIO
0
1
Edit
REC SPEED
SPACE
DVD
Disc
POWER
Connections
You can delete part of a title.
Even when a title is deleted from
the playlist, the original title will
remain.
The disc space to record will not
be increased.
First:
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Part of a title will be deleted.
7
Disc > Edit > Playlist
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
Yes
JAN/ 1 1:00AM CH12
Yes
JAN/ 1 1:00AM CH12
0:01:25
5
6
PQRS
TUV
WXYZ
8
9
DEF
CH
VIDEO/TV
SLOW
DVD
VCR
No
PAUSE
PLAY
XP
STOP
9
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
This operation may take a
while to be completed.
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
7
8
9
After writing to disc is completed, press SETUP button
to exit DISC menu.
8
4
DISPLAY
No
XP
3
MNO
0
Writing to Disc
1
2
JKL
SPACE
Disc > Edit > Playlist
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
ABC
GHI
7
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
1
.@/:
1
Select “Yes” using { / B buttons, then press ENTER button.
Note
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Putting names on titles
VR
DVD-RW
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
Original/PlayList menu will appear.
Screen:
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
Original
1
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
1
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Edit
Format
Finalize
Disc Protect OFF ON
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
2
Select “Edit” using K / L buttons, then press ENTER button.
76
AUDIO
Disc > Edit
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
7
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
OPEN/CLOSE
DEF
CH
VIDEO/TV
SPACE
SLOW
0
DVD
VCR
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
AUDIO
PAUSE
Disc > Edit > Playlist > Edit Title Name
1
XP
ABC
abc
123
@!?
Yes
0:01:25
PLAY
STOP
8
REC/OTR
No
SETUP
abc
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
5
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
SKIP
This operation may take a
while to be completed.
8
After writing to disc is completed, press SETUP to exit
DISC menu.
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
abc
123
@!?
0
<space>
<space>
0
<space>
1
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Disc > Edit > Playlist > Edit Title Name
1
ABC
abc
123
@!?
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
・To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
・To go on to the next entering area for letters,
press B button.
・You can enter up to 30 letters.
77
Others Español
When you finish entering a title
name, press ENTER button.
VCR functions
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
Changing the SETUP menu
ABC
Editing
Select
Press
6
Playing discs
Disc > Edit > Playlist > Edit Title Name
SKIP
CM SKIP
Recording
4
5
6
7
RETURN
Writing to Disc
Getting started
JAN/ 1 1:00AM CH12
REC SPEED
7
Disc > Edit > Playlist
1
POWER
Connections
4
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add any
more chapter markers.
First:
DVD
1
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
Add New
Title
Delete
Playlist
5
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
CH
VIDEO/TV
SLOW
DVD
VCR
PAUSE
PLAY
STOP
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
1
REC/OTR
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
Disc > Edit > Playlist
1
Chapter 1/1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
0:01:25
6
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Disc > Edit > Playlist
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
Disc > Edit > Playlist
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
78
3
MNO
4
Finalize
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
2
JKL
AUDIO
0
Format
3
ABC
GHI
JAN/1 5:00AM
Edit
Disc Setting
.@/:
1
DISPLAY
Disc
2
REC SPEED
SPACE
JAN/1 4:00AM
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc Protect OFF ON
POWER
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
<Delete>:
Disc > Edit > Playlist
1
Disc > Edit > Playlist
F
Yes
JAN/ 1 1:00AM CH12
No
1
XP
Chapter 2/2
0:01:25
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
Connections
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
The chapter marker which you
selected will be deleted.
<Delete>:
DEF
SPACE
CH
VIDEO/TV
SLOW
0
7
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
<Add>:
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
Writing to Disc
This operation may take a
while to be completed.
PLAY
STOP
8
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
8
SEARCH
MODE
SKIP
7
SKIP
CM SKIP
After writing to disc is completed, press SETUP button
to exit DISC menu.
No
XP
Playing discs
JAN/ 1 1:00AM CH12
No
XP
Recording
Disc > Edit > Playlist
Yes
JAN/ 1 1:00AM CH12
PAUSE
Getting started
• You cannot delete the first
chapter of each title.
DVD
VCR
DISPLAY
Writing to Disc
This operation may take a
while to be completed.
Setting pictures for thumbnails
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
Changing the SETUP menu
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the
title you are playing.The beginning picture has been selected as
the default.
First:
POWER
Editing
VR
DVD-RW
SLOW
0
DISPLAY
DVD
VCR
PAUSE
DVD
PLAY
Disc > Edit
STOP
1
1
REC/OTR
SETUP
Disc
Format
Finalize
Disc Protect OFF ON
SEARCH
MODE
Original
RETURN
SKIP
SKIP
1
2
CM SKIP
Note
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
79
Others Español
Edit
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
VCR functions
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
TIMER PROG.
ENTER
REC MONITOR
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
3
6
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
OPEN/CLOSE
DEF
CH
VIDEO/TV
SLOW
0
DVD
VCR
PAUSE
Disc > Edit > Playlist
1
Add New
Title
Delete
Playlist
5
AUDIO
SPACE
DISPLAY
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/1 4:00AM
REC SPEED
7
Disc > Edit > Playlist
4
POWER
No
PLAY
STOP
7
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
MENU/LIST TOP MENU
RETURN
Writing to Disc
CLEAR/C-RESET ZOOM
SEARCH
MODE
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons, then
press ENTER button.
Option window will appear.
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
80
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
CM SKIP
SKIP
SKIP
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Adding titles to a Playlist
VR
DVD-RW
DVD
4
Select “Add New Title” using
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
Connections
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
First:
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Disc > Edit > Playlist > Add New Title
1
2
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
DVD
VCR
3
PLAY
JAN/10 10:30AM
JAN/12 5:00PM
JAN/12 8:00PM
1
6
Disc
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
SEARCH
MODE
Finalize
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Disc Protect OFF ON
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
Recording
5
Format
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C-RESET ZOOM
Edit
PAUSE
Getting started
1
DISPLAY
Disc > Edit > Playlist > Add New Title
Playing discs
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
58%
Writing to Disc
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
4
JAN/1 5:00AM
Changing the SETUP menu
JAN/1 4:00AM
Editing
Disc > Edit > Playlist
Disc > Edit
JAN/12 8:00PM
Original
6
3
Disc > Edit > Playlist
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
To delete a title from Playlist,
refer to “Deleting titles” on page
74.
To delete a Playlist, refer to
“Deleting a Playlist” on page 82.
Add New
Title
Delete
Playlist
JAN/1 5:00AM
81
Others Español
1
After writing to disc is completed, press SETUP button
to exit DISC menu.
VCR functions
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting a Playlist
VR
DVD-RW
A Playlist can be deleted if no
longer needed.
First:
DVD
1
4
Select “Delete Playlist” using
K / L / { / B buttons, then
press ENTER button.
Option window will appear.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc > Edit > Playlist
DISPLAY
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
DVD
VCR
PAUSE
PLAY
4
Disc
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Yes
No
Edit
1
6
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
Format
CLEAR/C-RESET ZOOM
Finalize
Disc Protect OFF ON
SEARCH
MODE
5
Select “Yes” using { / B buttons, then press ENTER button.
A Playlist will be erased.
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
CM SKIP
SKIP
SKIP
1
2
3
4
5
Disc > Edit > Playlist
Add New
Title
Delete
Playlist
Disc > Edit
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
Original
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
82
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Note
• Deleting a Playlist will not
increase the available recording time on disc.
Editing
Before you start
Editing DVD-R discs
Deleting titles
DVD-R
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
0:01:25
AUDIO
OPEN/CLOSE
Connections
You can delete titles which you
do not need, however the disc
space to record on the disc will
not be changed.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
First:
DEF
SPACE
CH
VIDEO/TV
SLOW
0
You cannot select “Chapter Mark”.
DISPLAY
DVD
VCR
PAUSE
DVD
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
1
6
STOP
REC/OTR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
1
Edit
Title Delete
Edit Title Name
Chapter Mark
Format
Finalize
Yes
JAN/ 1 1:00AM CH12
No
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
XP
Playing discs
0:01:25
5
2
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
1
Disc > Edit
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Title Delete
Edit Title Name
Chapter Mark
Yes
4
JAN/1 4:00AM
JAN/ 1 1:00AM CH12
Changing the SETUP menu
1
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
No
XP
Writing to Disc
5
JAN/1 5:00AM
This operation may take a
while to be completed.
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
VCR functions
3
Recording
Disc
TIMER PROG.
ENTER
REC MONITOR
SEARCH
MODE
Disc > Edit
SETUP
Getting started
PLAY
4
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
Others Español
83
Editing
Editing DVD-R discs (cont’d)
Putting names on titles
DVD-R
You can put names on the titles
and change the names from this
menu.
The names you put on the titles
will be displayed on a titlelist.
First:
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
5
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
DEF
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
SLOW
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
DVD
VCR
DISPLAY
PAUSE
PLAY
STOP
1
7
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
5
To enter a title name, follow
Format
CH
VIDEO/TV
0
1
Edit
OPEN/CLOSE
SPACE
Disc > Edit > Edit Title Name
Disc
AUDIO
SEARCH
MODE
1
2
3
4
5
6
RETURN
SKIP
SKIP
CM SKIP
the steps of "Guide to edit
title name" on this page.
character set
Finalize
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
[ Guide to edit title name ]
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
JAN/1 5:00AM
Disc > Edit > Edit Title Name
3
1
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
ABC
abc
123
@!?
Yes
Title Delete
Edit Title Name
Chapter Mark
abc
Writing to Disc
This operation may take a
while to be completed.
7
JAN/ 1 1:00AM CH12
XP
0:01:25
You cannot select “Chapter Mark”.
84
Select
ABC
abc
123
@!?
<space>
<space>
0
<space>
1
!”#$%
&‘ ( ) *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
No
Disc > Edit
1
123
@!?
[Step2]: Press Number buttons following by the list
below.
0
6
Select “Yes” using { / B buttons, then press ENTER button.
5
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
After writing to disc is completed, press SETUP button
to exit DISC menu.
* Press 1 button, character set will be changed
to the " @!? " mode automatically.
・To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
・To go on to the next entering area for letters,
press B button.
・You can enter up to 30 letters.
Changing the SETUP menu
Before you start
Tour of the SETUP menu
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
1.Language setting
Pages 86-87
Audio Language
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
OSD Background
Transparency
100%
Set the background transparency of OSD
screen.
OSD Background
Color
1
2
3
35%
25%
Set the OSD screen color.
1 (Green), 2 (Blue), 3 (Red)
OSD Language
English
Français
Español
Set the language for OSD
(On Screen Display).
Screen Saver
OFF
5 minutes
10minutes
Set the time to work the screen saver on
the screen.
Digital Out
PCM
Set whether the sound recorded in 96kHz
will be down sampled in 48kHz.
Set the type of sound signal which outputs
from the digital audio output jack.
Compressing the range of sound volume.
ON
OFF
Outputting the sound during play in fast
forward.
Parental Lock
ALL
level 8 to 1
Set the parental level of your DVD discs.
(Change password)
Enter the current
four-digit password
Set and change the password.
VCR functions
ON
OFF
Changing the SETUP menu
Dynamic Range
Control
Fast Forward with
Audio
Editing
Auto
48kHz
96kHz
Dolby Digital
PCM
Stream
Playing discs
4.Parental setting
Pages 92-93
Set the language for disc menu.
Recording
3.Audio setting
Pages 90-91
Disc Menu Language English
French
Spanish
Contents
Getting started
2.Display setting
Pages 88-89
Items (highlight is the default)
Connections
SETUP menu
Note
85
Others Español
• If you change the setting in SETUP
menu, the information of contents
stays on even when the power is
switched off.
Changing the SETUP menu
Settings for Language
Press STOP button if you are playing a disc.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
4
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
2
CLEAR/C-RESET ZOOM
SEARCH
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
86
Changing the SETUP menu
Before you start
Settings for Language (cont’d)
Disc Menu Language (Default : English)
Set the language for Disc Menu.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
DVD
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Setup > Playback
TV Aspect
Setup > Playback
DVD
TV Aspect
Original
OFF
Audio Language
Digital Out
4:3 Letter Box
All
Original
English
English
Original
French
OFF
Spanish
Other
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Recording
4:3 Letter Box
All
English
DVD
Setup > Playback
DVD
TV Aspect
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Subtitle Language
OFF
Subtitle Language
TV Aspect
Parental Lock
Parental Lock
Disc Menu Language
Digital Out
DVD
4:3 Letter Box
All
OFF
English
English
Original
French
Digital Out
OFF
Spanish
Other
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Editing
Dynamic Range Control
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
age
e
Code Input
Audio
---ON
• When you finish entering
the code, press ENTER
button. Refer to the language code table on page
101.
VCR functions
Control
Changing the SETUP menu
If “Other” is selected, press 4-digit code using number buttons.
All
English
English
French
Original
Spanish
OFF
Other
Playing discs
Subtitle Language (Default : OFF)
Set the subtitle language.
Setup > Playback
Getting started
Audio Language (Default : Original)
Set the Audio language.
Connections
Setup > Playback
OFF
Press SETUP button to exit SETUP menu.
87
Others Español
5
Changing the SETUP menu
Settings for Display
Press STOP button if you are playing a disc.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
2
CLEAR/C-RESET ZOOM
SEARCH
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Display” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
4
Select a desired item using K / L buttons, then press
ENTER button.
88
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Changing the SETUP menu
Setup > Display
DVD
OSD Background Transparency 35%
OSD Language
1
English
Screen Saver
10 minutes
DVD
OSD Background Transparency 35%100%
85%
OSD Background Color
1
70%
OSD Language
English
50%
Screen Saver
10 minutes
35%
25%
10%
0%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Setup > Display
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Screen Saver
11
2
English
3
10 minutes
Setup > Display
VCR
OSD Language
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Recording
OSD Language (Default : English)
Set the language for OSD.
Setup > Display
VCR
DVD
OSD Background Transparency 35%
OSD Background Color
1
OSD Background Color
OSD Language
English
OSD Language
Screen Saver
10 minutes
Screen Saver
DVD
1
English
English
Français
10 minutes
Español
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Screen Saver
OSD Language
1
OFF
5English
minutes
1010
minutes
minutes
15 minutes
30 minutes
5
Changing the SETUP menu
OSD Background Transparency 35%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Editing
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
Playing discs
OSD Background Transparency 35%
Setup > Display
Getting started
OSD Background Color (Default : 1 Green)
Set the OSD screen color.
You can choose one among 1(Green), 2(Blue), and 3(Red).
Connections
OSD Background Color
Setup > Display
Before you start
Settings for Display (cont’d)
OSD Background Transparency (Default : 35%)
Set the background transparency of OSD screen.
You can choose one among 0% through 100%.
VCR functions
Press SETUP button to exit SETUP menu.
Others Español
89
Changing the SETUP menu
Settings for Audio
Choose the appropriate Audio settings for your equipment as
it will only affect DVD discs during playback.
Press STOP button if you are playing a disc.
1
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
Setup Menu
SEARCH
MODE
2
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note
• Dynamic Range Control function is available only on the
discs which are recorded in
the Dolby Digital format.
90
Changing the SETUP menu
Before you start
Settings for Audio (cont’d)
Digital Out
Set the digital audio output.
Setup > Playback
TV Aspect
Setup > Playback
DVD
Disc Menu Language
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Original
Subtitle Language
OFF
Subtitle Language
Parental Lock
Digital Out
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Settings for Dolby Digital (Default : Stream)
Original
udio
PCM
ON
Dolby
Digital
PCM
Stream
OFF
Settings for PCM (Default : Auto)
• Select a setting using K / L buttons, then
Note
press ENTER button.
When
playing disc with
OFF
Your setting will be activated.
copyright
protection
Auto
: Select “Auto” usually.
PCM Auto
48kHz : If your amplifier/decoder is NOT com- • If you select “Auto”, the
48kHz
ntrol Dolby
ON
Digital
patible with 96kHz PCM, select “48kHz”.
sound will be down sam96kHz
96kHz sound will be output in 48kHz.
pled at 48kHz.
udio
OFF
96kHz : If your amplifier/decoder is compatible
• If you select “96kHz”, no
with 96kHz PCM, select “96kHz”. 96kHz
digital sound will be outsound will be output.
put. Select “Auto”, so
Dynamic Range Control
that outputting 48kHz
(Default : ON)
digital sound.
Set to ON to compress the range between soft and loud sounds.
Recording
• Select a setting using K / L buttons, then press ENTER button.
Your setting will be activated.
PCM : Convert the Dolby Digital into PCM(2 channel).
When your amplifier/decorder is NOT compatible with Dolby Digital,
set to “PCM”.
Stream : Outputs a Dolby Digital signals.
When your amplifier/decorder is compatible with Dolby Digital, set to
“Stream”.
OFF
ntrol
OFF
PCM
ON
Dolby
Digital
OFF
Getting started
A
Connections
TV Aspect
Parental Lock
B
DVD
4:3 Letter Box
All
English
• Select a setting using K / L
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A or B.
Original
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
ON
OFF
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
Setup > Playback
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
VCR functions
Fast Forward with Audio (Default : OFF)
Set to ON to output the sound during playback in fast forward of x2.
Changing the SETUP menu
Parental Lock
DVD
4:3 Letter Box
All
English
Editing
TV Aspect
Playing discs
Setup > Playback
Digital Out
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
ON
ON
OFF OFF
5
Press SETUP button to exit SETUP menu.
91
Others Español
Dynamic Range Control
Changing the SETUP menu
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback
will stop if the ratings exceed the levels you set, it will require
you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate materials.
Press STOP button if you are playing a disc.
4
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
DVD
VCR
PAUSE
PLAY
1
5
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Setup Menu
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select “Parental Lock” using K / L buttons, then press
ENTER button.
92
Note
• Parental lock function may
not be available to some
discs.
• With some DVDs, it may be
difficult to find if they are
compatible with parental lock.
Be sure to check if the
parental lock function operates in the way that you have
set.
• Record the password in case
you forget it.
Changing the SETUP menu
Before you start
Settings for Parental lock level (cont’d)
Parental Lock (Default : All)
Set the Parental Lock level.
Setup > Playback
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
DVD
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Getting started
A
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Proceed to steps A or B.
Connections
Parental Lock
Setup > Playback
DVD
A password has not been set yet
Setup > Playback
DVD
TV Aspect
Yes
DVD
TV Aspect
Parental Lock
4:3
Password
All Letter Box
8- - - All
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
Recording
4:3
Letter Box
Change
AllPassword?
Yes
No
8
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
Setup > Playback
B
A password has been set already
Setup > Playback
TV Aspect
Parental Lock
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Setup > Playback
DVD
TV Aspect
4:3
Letter Box
Change
AllPassword?
Yes
No
8
Parental Lock
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
• If you select “No”, proceed
to Step 5.
Yes
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
DVD
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Changing the SETUP menu
• Enter the current password
using Number buttons.
Setup > Playback
Change the password
Editing
Disc Menu Language
DVD
4:3
All Letter Box
Password
8
All
7* * * *
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Playing discs
• If you select “No”, proceed
to Step 5.
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
5
Press SETUP button to exit SETUP menu.
Others Español
93
VCR functions
Note
• Press CLEAR/C-RESET button to erase numbers entered
incorrectly.
• When you forget the password or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
VCR functions
Playback
VCR
3
1
Press POWER button on the
remote control or the front
panel of the unit.
When you are playing a tape, turn
the TV on and be sure to select
the input to which the unit is connected.
Press:
VCR
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
1
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
Press PLAY B button to
resume play.
OPEN/CLOSE
DEF
PQRS
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
4
AUDIO
2
4
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
5
Note
2
5
Insert a prerecorded tape,
then press PLAY B button to
begin playback.
Press STOP C button to stop
playback.
6
Press STOP/EJECT C A button on the front panel of the
unit to eject the tape.
• When a tape without record
tab is inserted, the unit will
start playback automatically.
• Tracking will be automatically
adjusted upon playback.To
adjust the tracking manually,
press the CHANNEL K/L
buttons on the front panel of
the unit or CHK/CHL buttons on the remote control.
Recording and One-touch timer recording
Recording
First:
VCR
Recording/Playback Time
T60
T120
T160
1hour
2hours
2-2/3hours
3hours
6hours
8hours
• Stereo or SAP is selected.
94
TUV
WXYZ
7
8
9
SPACE
VCR
1
SLOW
VCR
DVD
PAUSE
1
PLAY
Press REC/OTR button to
begin the recording.
To temporarily stop recording or
to resume it, press PAUSE F button. After the unit has been in
Pause mode for 5 minutes, it will
stop automatically to protect the
tape and the video head from
damage.
2
Press STOP button when the
recording is completed.
Accidental erasure prevention
To prevent accidental recording
on a recorded cassette, remove
its record tab.To record on it
later, cover the hole with cellophane tape.
VIDEO/TV
0
DISPLAY
Before recording, make sure:
• The desired channel is selected
by pressing Number buttons on
the remote control or CHANNEL K/L buttons on the front
panel of the unit.
• There is a tape with a record tab
in the unit.
• The desired recording speed is
selected in SP (standard play) or
SLP (super long play) mode by
pressing REC SPEED button on
the remote control.
Recording speed:
Tape speed
Type of tape
SP mode
SLP mode
PQRS
Record tab
STOP
1
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
2
ENTER
Note
• To view one channel while
recording another
1) While you are recording on
the unit, press VIDEO/TV button.
2) At the cable box or satellite box, select the channel
you want to view.
If you have connected the unit to
a cable box or satellite box, refer
to “Connection to a Cable Box
or Satellite Box” section on page
14.
• If OTR is finished in VCR during
playback or REC mode in DVD, the
VCR will be in STOP mode and the
DVD keeps the current mode.
VCR functions
Before you start
Recording and One-touch timer recording (cont’d)
One-touch timer recording
VCR
VCR
1
(8:00)
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
(1:00)
(7:30)
When one-touch timer recording
is finished, the unit will turn off
automatically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
SEARCH
MODE
1
SKIP
SKIP
CM SKIP
Recording
Search
Index search
VCR
VCR
Press g/h buttons to
start index search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After index search, the VCR will
play the tape automatically.
2
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
Press SEARCH MODE button
so that the index search
menu appears.
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Changing the SETUP menu
1
2
REC SPEED
Editing
1
3
POWER
Playing discs
An index mark will be assigned at
the beginning of each recordings
you make.You may skip to a specific marked point by following the
steps below.
First:
Enter the number of recordings you wish to skip using
Number buttons with in 30
seconds.
Note
• Every time a tape is recorded,
an index mark is written on
the tape.
Others Español
95
VCR functions
INDEX SEARCH
03
Getting started
During normal recording,
press REC/OTR button to
begin one-touch timer
recording.
You can select a fixed recording
time by pressing the REC/OTR
button repeatedly.
(Normal recording)
(0:30)
Connections
This feature allows you to set the
recording length simply by pressing
REC/OTR button on the remote
control or the front panel of the unit.
First:
VCR functions
Search (cont’d)
Time search
VCR
This feature allows you to go to a
specific point on a tape by entering
the exact amount of time you wish
to skip in order to reach the
point.
First:
TIME SEARCH
2:50
2
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
AUDIO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
VCR
PAUSE
3
3
PLAY
1
Press SEARCH MODE button
repeatedly so that the Time
search menu appears.
2
Enter your desired time to
skip using Number buttons
with in 30 seconds.
Press g/h buttons to
start time search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After time search, the unit will play
the tape automatically.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C-RESET ZOOM
SEARCH
MODE
1
SKIP
SKIP
CM SKIP
Note
• These functions are not available during recording.
• Press STOP button to stop the
search.
• If the end of the tape is reached
during a Search, this unit will cancel
the search and rewind the tape.
Other operations
VCR
VCR
First:
To cue or review picture during playback (Picture Search):
Press g/h buttons during playback.
Press it again and the unit will search in super high speed. (in the SLP
mode only)
To freeze the picture on TV screen during playback (Still mode):
Press PAUSE F button. Each time you press the button, the picture will
be forwarded by one frame.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press CLEAR/C-RESET button.
To playback in slow motion:
Press SLOW
button during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
CHANNEL K/L or CHK/CHL buttons.
When you playback a tape recorded in Hi-Fi stereo:
Press AUDIO button on the remote control to select Hi-Fi or MONO
for playback sound mode.
• If you have connected a stereo TV to this unit, select “Hi-Fi”.
• If you have connected a monaural TV to this unit, select “MONO”.
96
Note
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the tape and the video head.
• To return to playback from
the Picture Search/Still/Slow
mode, press PLAY button.
Your Selection
Hi-Fi
MONO
Type of recorded tape
L-channel
R-channel
non Hi-Fi tapes
Monaural
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program
program
program
Others
Before you start
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and
restore proper operation.
Symptom
Remedy
Connections
Power
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• The Setup Display appears. Press RETURN
button to turn
off the display.
• Check the connection to your TV (page 13).
• Check the RF output channel when you view a TV program
using RF connection.
• Switch the input selector on your TV (such as to "LINE1") so
that the signal from this unit appears on the TV screen.
Picture noise appears.
• The disc is dirty or flawed.
• Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING”.
• If the picture output signal from the unit passes through your VCR
to get to your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV's S-VIDEO input.
• Adjust tracking control for better picture by pressing
CHANNEL (o / p) buttons on this unit or CH ( o / p)
buttons while you are playing a video tape.
TV program reception does not fill the
screen.
• Try to set the channels with "Auto Preset" in SETUP menu
(page 18).
• Select a channel of any TV program using the CH o / p buttons.
• Press VIDEO/TV button if necessary.
TV program pictures are distorted.
• Adjust TV antenna.
• Adjust the picture (see the TV's instruction manual).
• Place the unit and TV farther apart.
• Place the TV and any bunched antenna cables farther apart.
TV channels cannot be changed.
• Switch the input to TV.
• Connect the antenna cable correctly (page 13).
The playback picture or TV program from
the equipment connected through the
unit is distorted.
• If the playback picture output from a DVD player,VCR, or tuner
goes through the unit before reaching your TV, the copyprotection signal applied to some programs could affect picture
quality. Disconnect the playback equipment in question and
connect it directly to your TV.
There is no sound.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The unit is in pause mode or in Slow-motion Play mode.
• The unit is in fast forward or fast reverse mode.
• If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio Setup settings (pages 90-91).
Sound is noisy.
• The disc is dirty or flawed.
• When playing a DTS-CD, noise may come from the speakers.
This unit is not compatible with DTS-CD.
No DTS sound is output
• This unit is not compatible with DTS sound.
Playing discs
There is no picture.
Picture
Recording
• Check that the AC power cord is connected securely.
Getting started
The power does not turn on.
Editing
VCR functions
Others Español
97
Changing the SETUP menu
Sound
Others
Troubleshooting (cont’d)
Symptom
Playback
The disc does not play.
The disc does not start playback from the
beginning.
The unit starts playing from the disc
automatically.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
The language for the sound track cannot
be changed.
• No disc is inserted.
• A blank disc is inserted.
• No cassette tape is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page
43).
• The region code on the DVD VIDEO does not match the unit
(page 43).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about half an hour until the
moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play the disc if it was not finalized (page 41).
• Resume play was activated (page 48). Press STOP C button
twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
• The DVD VIDEO features an auto playback function.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
The subtitle language cannot be changed
or turned off.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when
icon does not
appear on the TV screen (page 58).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
Recording/Timer recording/Editing
The channel cannot be changed from the
channel you are recording.
Recording does not start immediately
after you press REC/OTR button.
• Set the TV's input to "TV."
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
• Make sure the tape has a safety tab when you record to a
cassette tape. If needed, cover the hole with cellophane tape.
Nothing was recorded even though you
set the timer setting correctly.
•There was a power failure during recording.
• The units internal clock stopped due to a power failure that
lasted for more than 30 seconds.
Reset the clock (pages 22-23).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that was set
later or has priority.
Recording does not stop immediately
after you press STOP C button.
• It will take a few seconds for the unit to input disc data before
recording can stop.
Timer recording is not complete or did
not start from the beginning.
• The timer setting overlapped with another setting that was set
later or has priority (page 36).
• Disc space was not enough.
• Make sure indicator appears on the front display of this unit. If not,
press POWER button.
Timer recording is impossible.
98
Remedy
Others
Symptom
Remedy
Remote control
The remote does not function.
Connections
• Batteries are weak.
• There are obstacles between the remote and the unit.
• The remote is far from the unit.
• There are no batteries in the remote.
• Turn on the unit.
• The remote is not pointed at the remote sensor on the unit.
• Press the DVD or VCR button, whichever you need. Then, try again.
• Check if a cassette tape is in this unit.
Before you start
Troubleshooting (cont’d)
Others
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
Disc Error
--- Please eject the disc. --Playback feature may not be
available on this Disc.
Cause
Recording
Error message
Getting started
The unit does not operate properly.
Solution
Insert the standardized disc which
bear the marks on page 43.
Region Error
--- Please eject the disc. --Playback is not authorized in your
region.
Playback is not authorized
in the region of the DVD-Video
disc which you inserted in the unit.
Insert the DVD-Video disc with
region codes 1 or ALL.
Parental Lock On
--- Please eject the disc. --The current selected parental level
Prohibits playback.
The current selected parental
level in the SETUP Menu
prohibits playback.
Check the "Parental Lock" setting
(pages 92-93).
The recording function encountered
the copy prohibited program.
You cannot record copy prohibited
programs.
Recording Error
This program is not
recordable in Video mode.
You are trying to record the copyonce program onto the DVD-RW
disc in Video mode.
Set "DVD-RW Recording Format"
to "VR mode" (page 28).
Recording Error
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
Insert the recordable disc, and
ensure the disc status is satisfied
with recording (pages 26-42).
You are trying to record the copyonce program onto the DVD-RW
disc which is not compatible with
CPRM.
Insert the DVD-RW disc
(ver.1.1 compatible with CPRM).
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 42).
99
Others Español
Recording Error
This disc is protected and not
recordable.
VCR functions
Recording Error
This program is not allowed to
be recorded on this disc.
Changing the SETUP menu
Can not record on this disc.
Editing
Recording Error
This program is not allowed
to be recorded.
Playing discs
Unplayable disc is inserted
in the unit.
Others
RF converter output
You can watch the TV programs with the tuner of the
unit. (Usually channel 3 or 4 of the TV is available for
the RF converter setting.) Be sure to connect the
unit to a TV using the RF cable. Refer to page 13.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
1
7
SPACE
Select channel 3 on your TV.
• Be sure that the unit is in DVD mode.
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
2
STOP
REC/OTR
Press VIDEO/TV button on the remote control.
• If noise appears, change the RF output channel of
the unit to CH 4 by pressing VIDEO/TV button for
3 seconds.The RF output channel will alternates
between CH3 and CH4 as follows.
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
for more than
3 seconds
3 seconds
(RF ON) CH4
3 seconds
(RF ON) CH3
3 seconds
(RF ON) CH4
3 seconds
• Changing the RF output channel is available only
when the unit is in DVD mode.
100
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
1
Others
VCR functions
Others Español
101
Changing the SETUP menu
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Editing
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Playing discs
Code
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6247
6265
5247
6258
6266
6367
6459
6461
Recording
Language
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Getting started
Code
6159
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
Connections
Language
(Afan) Oromo
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Before you start
Language code
Others
Glossary
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs are
4:3 (in other words, the screen is
almost square); widescreen models
are 16:9 (the screen is almost
twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on a DVD
disc is usually divided into chapters. See also Title.
Component video output
Each signal of luminance(Y) and
component(PB/CB, PR/CR) is independent to output so that you can
experience picture color as it is.
CPRM
(Content Protection for
Recordable Media)
CPRM is a copy protection system with scramble system regarding the recording of “copy-once”
broadcast programs (e.g. some
satellite broadcasts).
Digital audio
An indirect representation of
sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a
second for CD audio) by an analog-to-digital converter, generating
a stream of numbers. On playback,
a digital-to-analog converter generates an analog signal based on
these numbers. See also Sampling
frequency and Analog audio.
102
Dolby Digital
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound
of stereo(2ch) or multi-channel
audio (up to 5.1ch).
MP3 (MPEG Audio Layer 3)
MP3 is a method of compressing
files.You can copy MP3 files on
CD-R/RW discs from the computer and play the files on this unit.
Finalize
To make DVD discs, which have
done recording, possible to play in
DVD players.With this unit, it is
possible to finalize DVD-R/DVDRW discs.
PCM
(Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data compared to formats such as Dolby
Digital and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and
AV amplifiers with digital inputs,
this unit can convert Dolby Digital
and MPEG audio to PCM. See also
Digital audio.
Playlist
From this list you can play contents of a disc as your desired
order or in sequence. Also it is
allowed to search a specific scene
directly.
Regions code
Regions associate discs and players with particular areas of the
world.This unit will only play discs
that have compatible region
codes.You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
Sampling frequency
The rate which sound is measured
by a specified interval to turn into
digital audio data.The numbers of
sampling in one second defines as
sampling frequency.The higher the
rate, the better the sound quality
as possible as it is.
SAP
(Secondary Audio Program)
Sub-audio channel which is delivered separately from main-audio
channel.This audio channel is used
as an alternate in bilingual broadcasting.
S-Video output
It delivers independently each signal of color(C) and luminance(Y)
to TV as video signals, so that
higher-quality picture will be
gained.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs use tracks to divide
up the content of a disc.The DVD
equivalent is called a chapter. See
also Chapter.
Others
General
DVD-Video, DVD-R/RW, Audio CD,Video Cassette Tape
Four heads
AC120 V, 60 Hz
37 W (standby: 4.3 W)
9.5 lbs ( 4.3 kg )
17 1/8" x 3 15/16" x 10 1/4" (435 x 100 x 261 mm)
41Fº to 104Fº (5ºC to 40ºC)
5% to 85% (no condensation)
NTSC
Receivable channels
VHF
UHF
CATV
RF Converter
Converter output
Getting started
Tuner
Connections
System
VCR video heads
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
Before you start
Specifications
2-13ch
14-69ch
C1-C125ch
Built-in VHF converter
VHF channel 3 or 4
Recording
Note:
The specifications and design of this product are subject to change without notice.
Playing discs
Editing
Changing the SETUP menu
VCR functions
Others Español
103
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de disco
Paso 2:Coloque un disco en blanco
Mando a distancia
Hay varias tipos de discos DVD grabables a su
elección. Elija el tipo según "Tipos de disco DVD"
en esta página.
Este grabador de DVD puede grabar en los siguientes tipos de disco.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
1
OPEN/CLOSE
2
Para abrir
CH
Para
encender
Por ejemplo, cuando desea grabar repetidamente
en el mismo disco o cuando desea editar el disco
después de grabar, seleccione el disco de tipo
regrabable DVD-RW.
Cuando desea guardar grabaciones sin alterarlos,
un DVD no regrabable DVD-R puede ser más
conveniente.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
OPEN/CLOSE
3
Para cerrar
CH
Cargando
Esta operación puede
demorar en reconocerse.
Tipos de disco DVD
.
: Más adecuado
: Puede utilizar
Formato del disco
: Algunas funciones son limitadas
Desea
DVD-RW VR
: No puede utilizar
DVD-RW Video
DVD-R
DVD-RW Video
DVD-R
No
Grabar programas de TV
Volver a utilizar borrando partes no deseadas
Editar las grabaciones
Editar/grabar de equipos conectados
Copiar discos para distribución
*1
Reproducir en otro equipo de DVD
*1
Detalles
DVD-RW VR
Grabación
¿Regrabable?
Sí
Sí
Puede crear capítulos a intervalos fijos (auto.)
Sí
Sí
Sí
Puede crear capítulos donde desee (manual)
Sí
No
No
Puede grabar imágenes de tamaño 16:9
Sí
Sí
Sí
Puede grabar un programa de Copia-una-vez
Sí
No
No
Edición
*1
104
Puede hacer funciones de edición básica
Sí
Sí
No
Puede hacer funciones de edición avanzadas (edición de lista a reproducir)
Sí
No
No
El DVD-RW (modo VR) sólo puede reproducirse
en equipos de DV compatibles con VR.
Nota:
Para más detalles sobre las funciones anteriores y las
limitaciones implícitas, lea las explicaciones en este manual.
Coloque el disco en el
grabador. Haga el formato del
disco del menú SETUP, existen los formatos de video
(modo de Video) o de
grabación de video (modo
VR) según el tipo de disco
colocado. Esto es necesario
para preparar el disco para
grabación.Vea los detalles en
las páginas 28-30.
Español
1
Para seleccionar el
modo DVD
Paso 4: Seleccione
el canal
deseado
Paso 5: Grabe en
discos
DVD
PQRS
7
POWER
REC SPEED
AUDIO
OPEN/CLOSE
2
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
REC SPEED
AUDIO
.@/:
1
ABC
DEF
SPACE
2
3
0
GHI
JKL
MNO
7
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
2
VCR
VCR
VIDEO/TV
SLOW
VCR
DVD
PAUSE
DEF
CH
PLAY
VIDEO/TV
STOP
REC/OTR
SLOW
DVD
SETUP
TIMER PROG.
ENTER
REC MONITOR
PAUSE
RETURN
MENU/LIST TOP MENU
VIDEO/TV
SLOW
0
DISPLAY
DISPLAY
9
Getting started
POWER
WXYZ
8
0
DISPLAY
.@/:
1
TUV
SPACE
OPEN/CLOSE
DVD
PAUSE
1
Para seleccionar la
velocidad de grabación
Connections
Paso 3: Seleccione la
velocidad de
grabación
Before you start
Fácil grabación de DVD (cont.)
CH 1
Recording
I
SP 2:01 Rem.
Sugerencia 1: Reproduzca el contenido grabado
Paso 6: Pare la
grabación
¿Qué son títulos y capítulos?
SPACE
Título 1
Título 2
SLOW
0
DISPLAY
VCR
DVD
PAUSE
Editing
La grabaciones del disco DVD se dividen generalmente en títulos. Los títulos
pueden subdividirse en capítulos.
PLAY
STOP
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2
REC/OTR
SETUP
REC MONITOR
TIMER PROG.
ENTER
Changing the SETUP menu
Sugerencia 2: Edite el disco grabado
La edición de discos puede ser muy fácil y el grabador de DVD ofrece convenientes funciones de edición posibles sólo con los DVD-R/RW.
Puede editar lo siguiente de la lista de títulos.
58%
Escrit de datos
VCR functions
• Poniendo nombres en títulos
• Seleccionando imágenes para índices (modo VR)
• Seleccionando/borrando marcadores de capítulos
• Borrando partes de títulos (modo VR)
Original y Playlist (modo VR)
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones
originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.
Esta operación puede
demorar en completarse.
105
Others Español
¿Qué significa "Original" o "Playlist"?
A lo largo de este manual encontrará Original y Playlist que se refieren a las
grabaciones reales y la versión editada.
• La grabación Original se refiere a la grabación real en el disco.
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir
la versión Original.
Playing discs
Puede seleccionar el título que desea reproducir de un menú indicado y empiece
a reproducir inmediatamente. Las grabaciones pueden verse fácilmente en un
disco, el procedimiento es simple ya que
Parada grab.
sólo tiene que elegir el título en un capí- Inicio de grab.
Parada/inicio
tulo de la pantalla del menú.
Español
Reproducción con videograbadora
VCR
3
1
Presione el botón POWER en
el mando a distancia o el
panel frontal de la unidad.
Cuando reproduzca una cinta,
conecte el TV y asegúrese de
seleccionar la entrada donde se
conecta la unidad.
Presione:
VCR
2
Coloque una cinta pregrabada y presione el botón PLAY
B para empezar la reproducción.
Durante la reproducción, presione el botón PAUSE F.
Se hará una pausa de reproducción y se silenciará el sonido.
POWER
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
4
Presione el botón PLAY B
para continuar la reproducción.
DISPLAY
2
4
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
5
ENTER
5
Presione el botón STOP C
para detener la reproducción.
6
Presione el botón
STOP/EJECT C A en el panel
frontal de la unidad para
expulsar la cinta.
106
1
Nota
• Cuando se coloca una cinta
sin la lengüeta de grabación, la
unidad empezará a reproducir
automáticamente.
• El seguimiento se ajustará
automáticamente para la
reproducción. Para ajustar
manualmente el seguimiento,
presione los botones CHANNEL K/L en el panel frontal
de la unidad o los botones
CHK/CHL en el mando a
distancia.
Español
Before you start
Grabación y grabación con temporizador de un toque (VCR)
Grabación
VCR
VCR
JKL
5
6
TUV
WXYZ
8
9
SLOW
0
1
Presione el botón REC/OTR
para empezar la grabación.
Para detener temporalmente la
grabación o continuarla, presione
el botón PAUSE F. Después de
que la unidad haya estado en el
modo de pausa durante 5 minutos, se detendrá automáticamente
para proteger al cinta y el cabezal
de video contra cambios.
2
Prevención contra borrado accidental
Lengüeta de
grabación
STOP
1
REC/OTR
SETUP
TIMER PROG.
2
ENTER
REC MONITOR
Nota
• Para ver un canal mientras
graba en otro
1) Mientras está grabando en
la unidad, presione el botón
VIDEO/OTR.
2) En la caja de cable o caja
de satélite, seleccione el canal
que desea ver.
Si se conectó la unidad a una
caja de cable o caja de satélite,
consulte la sección de
"Conexión a una caja de cable
o caja de satélite" en la página
14.
• Si se termina el OTR en la
videograbadora durante el
modo de reproducción o REC
en DVD, la videograbadora
estará en el modo STOP y la
DVD se mantiene en el modo
actual.
VCR
VCR
(1:00)
(7:30)
Cuando termina la grabación con
temporizador de un toque, la
unidad se desconectará automáticamente.
POWER
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
VCR
DVD
PAUSE
PLAY
Para cancelar la grabación con
temporizador de un toque dentro
del tiempo especificado, presione
el botón STOP C.
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C-RESET ZOOM
SEARCH
MODE
1
RETURN
SKIP
SKIP
CM SKIP
107
Others Español
Durante la grabación normal,
presione el botón REC/OTR
para empezar la grabación
con temporizador de un
toque.
Puede seleccionar un tiempo de
grabación determinado presionando repetidamente el botón
REC/OTR.
(8:00)
(0:30)
VCR functions
1
(Canal a grabar)
Changing the SETUP menu
Esta función permite seleccionar
la longitud de la grabación simplemente presionando el botón
REC/OTR en el mando a distancia
o en el panel frontal de la unidad.
Primero:
Editing
Grabación con temporizador de un toque
1
PLAY
Playing discs
Para evitar una grabación por
accidente en un casete grabado,
rompa la lengüeta de grabación.
Para volver a grabar posteriormente, cubra el orificio con
cinta adhesiva.
PAUSE
Recording
Presione el botón STOP
cuando se complete la
grabación.
DVD
VCR
DISPLAY
Getting started
• Se selecciona Estéreo o SAP.
SPACE
CH
VIDEO/TV
Connections
Tiempo de
grabación/reproducción
T60
T120
T160
1 hora
2 horas 2-2/3 horas
3 horas
6 horas
8 horas
MNO
4
PQRS
7
Antes de grabar, asegúrese de que:
• Se seleccionó el canal deseado
presionando los botones numéricos en el mando a distancia o
botones CHANNEL K/L en el
panel frontal de la unidad.
• Hay una cinta con la lengüeta
para grabación intacta en la
unidad.
• Se seleccionó la velocidad de
grabación deseada en SP (reproducción estándar) o SLP (reproducción de super larga duración)
presionando el botón REC
SPEED en el mando a distancia.
Velocidad de grabación:
Velocidad
de la cinta
Tipo de cinta
Modo SP
Modo SLP
GHI
Primero:
LIMITED WARRANTY
FUNAI CORP. will repair this Emerson product, free of charge in the USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
LABOR:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from
the date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER
WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This Emerson Limited warranty
does not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal
use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse,
mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as
hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts
of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR
MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY
THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART
OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
To locate your nearest Emerson Authorized Service Center or for general service procedure,
please call 1-800-605-8457 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-605-8457
http://www.funai-corp.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China
0VMN04201 / E9400UD ★★★★