MCA Menu Tree
(MCA Software Version 2.3.0.5)
MCA Display (Lines 1 and 2
and Misc. Information)
Line 1 of the MCA Display when No Alarms are Present.
Line 2 of the MCA Display.
System Output Voltage and System Output
Current.
SYSTEM OK, NO ALARMS
Line 1 of the MCA Display when Alarms are
Present.
(1 or more of the following Alarm Messages display.
If more than 1 alarm conditions are present, Alarm
Messages continuously scroll across the display.)
1
EMERGENCY STOP INPUT ACTIVE
2
HI VOLTAGE SHUTDOWN INPUT ACTIVE
2A
vv.vvV
SYSTEM VOLTAGE IS VERY LOW
4
SYSTEM BATTERY IS ON DISCHARGE
5
SYSTEM HIGH VOLTAGE #1 ALARM
6
SYSTEM HIGH VOLTAGE #2 ALARM
7
1 SYSTEM BREAKER OR FUSE ALARM
or
### SYSTEM BREAKER & FUSE ALARMS
11
AC POWER IS OFF TO ALL PCUs
12
1 PCU HAS FAILED
or
### PCUs HAVE FAILED
or
NO PCUs ARE IN INVENTORY
40
1 DIST. PANEL HAS FAILED
or
## DIST. PANELS HAVE FAILED
or
NO DIST. PANELS ARE IN INVENTORY
55
1 I/O BOARD HAS FAILED
or
## I/O BOARDS HAVE FAILED
or
NO I/O BOARDS ARE IN INVENTORY
66
1 ROUTER HAS FAILED
or
## ROUTERS HAVE FAILED
or
NO ROUTERS ARE IN INVENTORY
78
1 RELAY BOARD HAS FAILED
or
## RELAY BOARDS HAVE FAILED
or
NO RELAY BOARDS ARE IN INVENTORY
88
HIGH TEMPERATURE #1 ALARM
89
HIGH TEMPERATURE #2 ALARM
90
LOW TEMPERATURE #1 ALARM
91
LOW TEMPERATURE #2 ALARM
92
TEMPERATURE SENSOR NO SIGNAL
93
MAJOR MONITORING ALARM(S)
or
Monitoring Major LED Messages
94
MINOR MONITORING ALARM(S)
or
Monitoring Minor LED Messages
95
MONITORING INFORMATION
or
Monitoring Info LED Messages
96
MONITORING DOES NOT RESPOND
97
CONTROLLER FAILURE ####
98
THE CONTROLLER IS INITIALIZING
99
TOTAL LOAD CURRENT ALARM
100
DISTRIBUTION GROUP A LOAD ALARM
101
DISTRIBUTION GROUP B LOAD ALARM
102
THE DISPLAY DOES NOT RESPOND
aaaaaA
or
any of the following messages as a
User navigates the MCA Menu tree.
ALTERNATE CURRENT LIMIT ACTIVE
3
Section 5886
Issue AF, October 25, 2011
CHANGE THE VARIABLE
Text displayed while changing
a value.
ARE YOU SURE?
Text displayed while storing a
value.
CHANGES ARE DISABLED
Text displayed if local changes
are disabled.
<CONDITION> LIMITED
Text displayed if value cannot
be changed further.
RELAY FUNCTION A#
Text displayed while in Relay
Function Definition Menu.
WARNING: TOTAL POWER
LOSS IS POSSIBLE. GO
AHEAD ANYWAY?
Text displayed before changing
Test High Voltage Shutdown
value.
Navigation Key Codes
(displays in 4th Line
as a User navigates the
MCA Menu Tree).
alarm cutoff
information
i
available
+ increment
- decrement
Y yes
N no
up
down
right
left
E enter
alarm cutoff/
enter together
± yes/no together
Color Code:
Identify Unit
Identify Unit,
Changeable Parameter
Changeable Parameter
Black indicates text that
does not change.
Red indicates places
where the MCA substitutes
a fixed number or text
string.
Blue indicates places
where the MCA substitutes
a number or text string that
can be scrolled through
different values.
Key:
a = amps
v = volts
t = temperature
h = hours
m = minutes
s = seconds
d = day of the month
mon = month
y = year
# = substituted number or text
A# = alarm function number
B# = bay number
I# = binary input number
P# = position number
ID# = PCU (Rectifier) MCA identification
number
N# = Total number of PCUs (Rectifiers)
in the system
SN# = PCU (Rectifier) serial number
R# = relay number
A/B = A (group A, jumper on) or
B (group B, jumper off) or
space (all jumpers on)
C/F = C (Celsius) or
F (Fahrenheit)
F/CB/PI = FUSE or
BREAKER or
PLUG-IN or MISC 50-73
<CONDITION> = FLOAT or
TEST/EQ or
HV SHUTDOWN or
HIGH RANGE or
LOW RANGE or
MAX. COMP. or
MIN. COMP.
/_ = 
(condition is selected) or
space (condition not selected)
/ =
(alarms were present) or

(no alarms present)
Page 1 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MCA Control
Keypad Functions
Section 5886
Issue AF, October 25, 2011
TASK
MCA Menu Tree
(MCA Software Version 2.3.0.5)
KEY OR KEY COMBINATIONS
NOTES
YES / + / i and NO / -
At any level in the MCA menus,
pressing YES / + / i and NO / simultaneously takes you back to the
beginning of the MCA menu tree.
YES / + / i
Getting to Home Position
NO / -
You can travel left to right from one
menu to another by pressing ENTER.
You can also go back to a specified
menu by pressing ENTER while the
menu's name is being displayed.
ENTER
Moving from One Menu
to Another Menu
ENTER /
/
Press UP ARROW to move up the list
of available entries in the active menu.
Press DOWN ARROW to move down
the list of available entries in the active
menu.
UP ARROW, DOWN ARROW
Moving Within a Menu
FUNCTION
SELECT
Up
Down
Changing a Value or Setting
ENTER and ALARM CUTOFF
Entering the
Adjustment/Change
Setting Mode
ALARM
CUTOFF
ENTER /
/
YES / + / i and NO / YES / + / i
Changing the
Value or Setting
NO / -
Changing a value or setting requires
four (4) steps.
1. With the current value or setting
being displayed, simultaneously
press ENTER and ALARM
CUTOFF.
2.
To increase the value or change
the setting, press YES / + / i. To
decrease the value or change the
setting, press NO / -.
3.
With the correct value or setting
being displayed, press ENTER.
4.
To accept the change, at the
"ARE YOU SURE?" prompt press
YES / + / i. To reject the change,
at the "ARE YOU SURE?" prompt
press NO / -.
ENTER
Locking the Change
ENTER /
/
YES / + / i and NO / YES / + / i
Confirming the Change
NO / -
Changing a Control Function
ENTER and ALARM CUTOFF
Entering the
Adjustment/Change
Setting Mode
ALARM
CUTOFF
ENTER /
YES / + / i and NO / Confirming the Change
YES / + / i
NO / -
/
Changing a control function requires
two (2) steps.
1. With the control function menu
item being displayed,
simultaneously press ENTER and
ALARM CUTOFF.
2.
To accept the change, at the
"ARE YOU SURE?" prompt press
the YES / + / i. To reject the
change, at the "ARE YOU
SURE?" prompt press NO / -.
Page 2 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MCA Menu Tree
(MCA Software Version 2.3.0.5)
MCA Display (Lines 3 and 4)
(Sheet 1 of 4)
Section 5886
Issue AF, October 25, 2011
The User navigates Lines 3 and 4 of the MCA Display using the Keypad on the MCA Control Panel.
(The following indicates the actual text shown on each line of Lines 3 and 4 of the MCA Display, Line
4 also displays applicable navigation key codes, see previous page for explanation of codes.)
MAIN ALARM MENU
INITIALIZATION MENU
############ WAIT ##
18
2
HI VOLTAGE SHUTDOWN
INPUT ACTIVE
19
ALTERNATE CURRENT
LIMIT ACTIVE
PCU B#-ID#/N#
H.V. SHUTDOWN
20
PCU B#-ID#/N#
AC LINE OFF
21
PCU B#-ID#/N#
AC LINE LOW
22
PCU B#-ID#/N#
AC LINE HIGH
23
A
V###########
2A
B
CHECK VALUES BEFORE
STARTING
C
FLOAT SETPOINT
= vv.vvV
D
TEST/EQUALIZE
= vv.vvV
E
HI VOLTAGE SHUTDOWN
= vv.vvV
F
PCU CURRENT LIMIT
= aaaaaA
or
PCU CURRENT LIMIT
POWER SHARE
or
PCU CURRENT LIMIT
ALT. LIMIT
G
SYSTEM HI VOLTAGE #1
= vv.vvV
H
SYSTEM HI VOLTAGE #2
= vv.vvV
I
J
TOTAL LOAD CURRENT
= aaaaaA
L
DISTRIBUTION GROUP A
= aaaaaA
M
DISTRIBUTION GROUP B
= aaaaaA
N
HIGH TEMPERATURE #1
= ttt°C/F
or
NO HIGH TEMPERATURE
#1 ALARM
O
P
Q
R
S
T
U
HIGH TEMPERATURE #2
= ttt°C/F
or
NO HIGH TEMPERATURE
#2 ALARM
LOW TEMPERATURE #1
= ttt°C/F
or
NO LOW TEMPERATURE
#1 ALARM
LOW TEMPERATURE #2
= ttt°C/F
or
NO LOW TEMPERATURE
#2 ALARM
AUDIBLE SILENT TIME
= mm MINUTES
or
AUDIBLE ALARMS STAY
SILENCED
PCU SEQUENCING IS
DISABLED
or
PCU SEQUENCING DELAY
= ss SECONDS
TEST EQUALIZE IS DISABLED
or
MANUAL TEST/EQUALIZE
= hh HOURS
or
TEST/EQUALIZE STOP
IS MANUAL
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
AUTO EQUALIZE IS
DISABLED
or
AUTO EQUALIZE FOR ##
x DISCHARGE
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
V
3
SYSTEM VOLTAGE IS
VERY LOW
4
SYSTEM BATTERY IS ON
DISCHARGE
5
SYSTEM HIGH VOLTAGE
#1 ALARM
6
SYSTEM HIGH VOLTAGE
#2 ALARM
7
1 SYSTEM BREAKER OR
FUSE ALARM
or
### SYSTEM BREAKER &
FUSE ALARMS
11
12
BATTERY ON DISCHARGE
= vv.vvV
VERY LOW VOLTAGE
= vv.vvV
K
NO TEMPERATURE
COMPENSATION
or
TEMPERATURE SLOPE
= 0.vvvV/ °C/F
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
PCU ALARM DETAIL MENU
PCU B#-ID#/N#
EMERG. STOP
1
EMERGENCY STOP
INPUT ACTIVE
40
55
66
AC POWER IS OFF TO
ALL PCUs
1 PCU
HAS FAILED
or
### PCUs
HAVE FAILED
or
NO PCUs ARE
IN INVENTORY
1 DIST. PANEL
HAS FAILED
or
## DIST. PANELS
HAVE FAILED
or
NO DIST. PANELS ARE
IN INVENTORY
1 I/O BOARD
HAS FAILED
or
## I/O BOARDS
HAVE FAILED
or
NO I/O BOARDS ARE
IN INVENTORY
1 ROUTER
HAS FAILED
or
## ROUTERS
HAVE FAILED
or
NO ROUTERS ARE
IN INVENTORY
3A, 4A, 5A, 6A
ALARM LIMIT vv.vvV
NOW AT vv.vvV
8
9
10
13
GO BACK TO MENU TREE
BEGINNING
PCU ALARM MENU
PCU B#-ID#/N#
FAILURE
DISTRIBUTION GROUP B
LOAD ALARM
102
THE DISPLAY DOES NOT
RESPOND
W
MAXIMUM COMPENSATION
= vv.vvV
103
GO TO FUNCTION MENU
MINIMUM COMPENSATION
= vv.vvV
104
X
GO BACK TO MENU TREE
BEGINNING
Y
IT IS NOW hh:mm:ss
dd-mon-yy
Z
READY TO START THE
SYSTEM NOW?
DIST. PANEL B#-P#A/B
PROCESSOR
28
PCU B#-ID#/N#
ON STANDBY
51
DIST. PANEL B#-P#A/B IS
DUPLICATED
52
DIST. PANEL B#-P#A/B
NO RESPONSE
GO BACK TO MENU TREE
BEGINNING
16
32
17
GO BACK TO MENU TREE
BEGINNING
33
PCU B#-ID#/N#
1 FAN SPEED
34
PCU B#-ID#/N#
2+ FANS SPEED
DISTRIBUTION ALARM MENU
DIST. PANEL B#-P#A/B
41 FAILURE
42
GO TO MAIN ALARM
MENU
35
GO BACK TO MENU TREE
BEGINNING
36
43
56
I/O BOARD ALARM MENU
I/O BOARD B#-P#
FAILURE
57
GO TO MAIN ALARM
MENU
58
GO BACK TO MENU TREE
BEGINNING
PCU B#-ID#/N#
NO VOLT SENSE
PCU B#-ID#/N#
DUPLICATED
37
PCU B#-ID#/N#
NO RESPONSE
38
GO TO PCU ALARM MENU
39
GO BACK TO MENU TREE
BEGINNING
I/O BOARD ALARM DETAIL MENU
67
ROUTER ALARM MENU
ROUTER B#
FAILURE
59
68
GO TO MAIN ALARM
MENU
60
69
GO BACK TO MENU TREE
BEGINNING
61
79
RELAY ALARM MENU
RELAY BOARD B#-P#
FAILURE
GO TO MAIN ALARM
MENU
62
81
GO BACK TO MENU TREE
BEGINNING
I/O BOARD B#-P#
OVER CURRENT
I/O BOARD B#-P#
PROCESSOR
I/O BOARD B#-P# IS
DUPLICATED
I/O BOARD B#-P#
NO RESPONSE
64
GO TO I/O BOARD
ALARM MENU
65
GO BACK TO MENU TREE
BEGINNING
70
ALARM LIMIT ttt°C/F
NOW AT ttt°C/F
Binary Input Customer
Text Messages
63
88A, 89A, 90A, 91A
MINOR MONITORING
ALARM(S)
or
Monitoring Minor
LED Messages
101
PCU B#-ID#/N#
INHIBITED
27
54
93
100
DIST. PANEL B#-P#A/B
A/B CHANGED
50
PCU B#-ID#/N#
HIGH AMBIENT
PCU B#-ID#/N#
LOAD SHARE
MAJOR MONITORING
ALARM(S)
or
Monitoring Major
LED Messages
DISTRIBUTION GROUP A
LOAD ALARM
49
31
TEMPERATURE SENSOR
NO SIGNAL
TOTAL LOAD CURRENT
ALARM
PCU B#-ID#/N#
FUSE/BREAKER
26
GO TO MAIN ALARM
MENU
92
THE CONTROLLER IS
INITIALIZING
DIST. PANEL B#-P#A/B
LVD FAILURE
15
LOW TEMPERATURE #2
ALARM
99
48
25
GO TO DISTRIBUTION
ALARM MENU
91
CONTROLLER FAILURE
####
F/CB/PI B#-P#A/B
OVER CURRENT
53
LOW TEMPERATURE #1
ALARM
98
47
PCU B#-ID#/N#
THERMAL STOP
90
97
PCU B#-ID#/N#
POWER FACTOR
PCU B#-ID#/N#
DC/DC CONV.
24
30
80
MONITORING DOES NOT
RESPOND
POSITION B#-P#A/B
TYPE UNKNOWN
1 REMOTE PCU
HAS FAILED
HIGH TEMPERATURE #2
ALARM
96
46
14
89
95
PCU B#-ID#/N#
AC PHASE LOST
29
HIGH TEMPERATURE #1
ALARM
MONITORING
INFORMATION
or
Monitoring Info
LED Messages
POSITION B#-P#A/B
NOT FOUND
or
POSITION NOT FOUND
PANEL B#-P#A/B
### REMOTE PCUS
HAVE FAILED
88
94
GO TO MAIN ALARM
MENU
45
PCU B#-ID#/N#
THERMAL LIMIT
1 RELAY BOARD
HAS FAILED
or
## RELAY BOARDS
HAVE FAILED
or
NO RELAY BOARDS ARE
IN INVENTORY
78
FUSE ALARM MENU
F/CB/PI B#-P#A/B
IS OPEN
DISTRIBUTION ALARM DETAIL MENU
DIST. PANEL B#-P#A/B
DISCONNECTED
or
44
DIST. PANEL B#-P#A/B
RECONNECT?
ROUTER ALARM DETAIL MENU
ROUTER B# REMOTE
SENSE OPEN
71
ROUTER B# INTERNAL
SENSE OPEN
72
ROUTER B# PROCESSOR
73
ROUTER B# REPORTS AN
ILLEGAL NODE
74
ROUTER B# IS
DUPLICATED
75
ROUTER B#
NO RESPONSE
76
GO TO ROUTER ALARM
MENU
77
GO BACK TO MENU TREE
BEGINNING
RELAY ALARM DETAIL MENU
RELAY B#-P#-R# IS
STUCK
RELAY BOARD B#-P#
83
PROCESSOR
RELAY BOARD B#-P# IS
84
DUPLICATED
82
99A, 100A, 101A
ALARM LIMIT aaaaaA
NOW AT aaaaaA
85
86
87
RELAY BOARD B#-P#
NO RESPONSE
GO TO RELAY ALARM
MENU
GO BACK TO MENU TREE
BEGINNING
NORMAL DISPLAY MENU
or
REPLACE ### PCUs?
AUTO IN ###
A
to
(Sheet 2 of 4)
Page 3 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MCA Display (Lines 3 and 4)
(Sheet 2 of 4)
Section 5886
Issue AF, October 25, 2011
from
(Sheet 1 of 4)
A
FUNCTION MENU
(cont'd on next page)
105
VIEW THE SYSTEM
MEASUREMENTS
FLOAT MODE IS ACTIVE
SET TEST/EQ?
or
TEST/EQ MODE ACTIVE
SET FLOAT?
133
134
or
TEST/EQUALIZE INPUT
IS ACTIVE
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATE
CURRENT LIMIT
MEASUREMENT MENU
106
SYSTEM OUTPUT SENSE
vv.vvV (REM)
or
SYSTEM OUTPUT SENSE
vv.vvV (AVG)
MCA Menu Tree
(MCA Software Version 2.3.0.5)
ROUTER VOLTAGE MENU
107
108
ROUTER B# REMOTE
SENSE vv.vvV
ROUTER B# INTERNAL
SENSE vv.vvV
118
GO TO MEASUREMENT
MENU
GO BACK TO MENU TREE
BEGINNING
120
GO TO SYSTEM LOAD
MENU
121
GO BACK TO MENU TREE
BEGINNING
DISTRIBUTION LOAD MENU
DIST. PANEL B#-P#A/B
LOAD aaaaaA
I/O BOARD B#-P#
LOAD aaaaaA
TOTAL SYSTEM
LOAD aaaaaA
TOTAL PCU OUTPUT
aaaaaA
or
TOTAL PCU/RECTIFIER
aaaaaA
109
130
TEMPERATURE SENSOR
ttt°C/F
112
131
GO TO FUNCTION MENU
TOTAL DISTRIBUTION
LOAD aaaaaA
or
TOTAL AUXILIARY
LOAD aaaaaA
132
GO BACK TO MENU TREE
BEGINNING
113
DISTRIBUTION GROUP A
LOAD aaaaaA
122
F/CB/PI B#-P#A/B
LOAD aaaaaA
114
DISTRIBUTION GROUP B
LOAD aaaaaA
123
GO TO DISTRIBUTION
LOAD MENU
REMOTE SYSTEM
LOAD aaaaaA
GO TO MEASUREMENT
MENU
124
GO BACK TO MENU TREE
BEGINNING
111
125
INVENTORY MENU
135
VIEW THE SYSTEM
INVENTORY
B
to
(Sheet 3 of 4)
149
150
161
171
181
191
192
199
200
1 PCU IS
REPORTING
or
### PCUs ARE
REPORTING
or
NO PCUs ARE
INSTALLED
1 PCU POSITION
IS EMPTY
or
### PCU POSITIONS
ARE EMPTY
or
NO PCU POSITIONS
ARE EMPTY
or
TOTAL PCU POSITIONS
= ###
1 DIST. PANEL IS
REPORTING
or
## DIST. PANELS ARE
REPORTING
or
NO DIST. PANELS ARE
INSTALLED
1 I/O BOARD IS
REPORTING
or
## I/O BOARDS ARE
REPORTING
or
NO I/O BOARDS ARE
INSTALLED
1 ROUTER IS
REPORTING
or
## ROUTERS ARE
REPORTING
or
NO ROUTERS ARE
INSTALLED
1 RELAY BOARD IS
REPORTING
or
## RELAY BOARDS ARE
REPORTING
or
NO RELAY BOARDS ARE
INSTALLED
TEMPERATURE SENSOR
REPORTING
or
NO TEMPERATURE
SENSOR
MONITORING IS
REPORTING
or
NO MONITORING IS
INSTALLED
SENSE VOLTAGE IS
REMOTE INPUT
or
SENSE VOLTAGE IS
AVERAGED
CONTROLLER ASSEMBLY
############
210
UPDATE THE INVENTORY
211
GO TO FUNCTION MENU
212
GO BACK TO MENU TREE
BEGINNING
110
SYSTEM LOAD MENU
115
116
119
DISTRIBUTION LOAD DETAIL MENU
PCU INVENTORY DETAIL MENU
117
GO BACK TO MENU TREE
BEGINNING
139
PCU CURRENT MENU
140
126
PCU B#-ID#/N#
aaaaaA
127
128
129
141
B#-ID#/N# ASSY.
#####################
B#-ID#/N# SERIAL
#####################
B#-ID#/N# BOOT
#####################
RECTIFIER OUTPUT
aaaaaA
GO TO MEASUREMENT
MENU
143
GO BACK TO MENU TREE
BEGINNING
144
PSC B#-ID# SERIAL #
#####################
145
PSC B#-ID# BOOTCODE
#####################
146
PSC B#-ID# SOFTWARE
#####################
PCU INVENTORY MENU
142
B#-ID#/N# SW VER
#####################
PSC B#-ID# ASSEMBLY
#####################
136
PCU B#-ID#/N#
RATED aaaaaA
137
GO TO INVENTORY MENU
138
GO BACK TO MENU TREE
BEGINNING
147
GO TO PCU
INVENTORY
DISTRIBUTION INVENTORY MENU
148
GO BACK TO MENU TREE
BEGINNING
151
PANEL B#-P#A/B INCLUDES
1 POINT
or
PANEL B#-P#A/B INCLUDES
## POINTS
DISTRIBUTION INVENTORY DETAIL MENU
154
POINT B#-P#A/B IS A
F/CB/PI
PANEL B#-P#A/B ASSEMBLY
############
152
GO TO INVENTORY MENU
155
153
GO BACK TO MENU TREE
BEGINNING
156
PANEL B#-P#A/B SERIAL #
############
I/O BOARD INVENTORY MENU
157
PANEL B#-P#A/B BOOTCODE
############
162
I/O BOARD B#-P# IS
INSTALLED
163
GO TO INVENTORY MENU
164
GO BACK TO MENU TREE
BEGINNING
ROUTER INVENTORY MENU
158
PANEL B#-P#A/B SOFTWARE
############
159
GO TO DISTRIBUTION
INVENTORY
160
GO BACK TO MENU TREE
BEGINNING
172
ROUTER B# IS
INSTALLED
173
GO TO INVENTORY MENU
165
BOARD B#-P# ASSEMBLY
############
174
GO BACK TO MENU TREE
BEGINNING
166
BOARD B#-P# SERIAL #
############
167
BOARD B#-P# BOOTCODE
############
RELAY INVENTORY MENU
182
RELAY BOARD B#-P# IS
INSTALLED
I/O BOARD INVENTORY DETAIL MENU
168
BOARD B#-P# SOFTWARE
############
183
GO TO INVENTORY MENU
184
GO BACK TO MENU TREE
BEGINNING
169
GO TO I/O BOARD
INVENTORY
MONITORING INVENTORY DETAIL MENU
170
GO BACK TO MENU TREE
BEGINNING
MONITORING ASSEMBLY
#####################
MONITORING SERIAL #
#####################
175
193
194
ROUTER INVENTORY DETAIL MENU
ROUTER B# ASSEMBLY
############
195
MONITORING BOOTCODE
#####################
196
MONITORING SOFTWARE
#####################
177
197
GO TO INVENTORY MENU
178
GO BACK TO MENU TREE
BEGINNING
ROUTER B# SOFTWARE
############
198
179
GO TO ROUTER
INVENTORY
180
GO BACK TO MENU TREE
BEGINNING
176
CONTROLLER INVENTORY DETAIL MENU
201
CONTROLLER SERIAL #
#####################
202
CONTROLLER BOOTCODE
#####################
203
204
CONTROLLER SOFTWARE
#####################
DISPLAY ASSEMBLY
#####################
205
DISPLAY SERIAL #
#####################
206
DISPLAY BOOTCODE
#####################
207
DISPLAY SOFTWARE
#####################
208
GO TO INVENTORY MENU
209
GO BACK TO MENU TREE
BEGINNING
ROUTER B# SERIAL #
############
ROUTER B# BOOTCODE
############
RELAY INVENTORY DETAIL MENU
BOARD B#-P# ASSEMBLY
############
185
186
BOARD B#-P# SERIAL #
############
186
BOARD B#-P# BOOTCODE
############
188
BOARD B#-P# SOFTWARE
############
189
GO TO RELAY BOARD
INVENTORY
190
GO BACK TO MENU TREE
BEGINNING
Page 4 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MCA Menu Tree
(MCA Software Version 2.3.0.5)
MCA Display (Lines 3 and 4)
(Sheet 3 of 4)
Section 5886
Issue AF, October 25, 2011
from
(Sheet 2 of 3)
B
FUNCTION MENU
(cont'd from previous page)
ADJUST THE SYSTEM
213
VOLTS & AMPS
225
239
226
227
ADJUST THE ALARM
SETPOINTS
228
TURN PCUs ON OR OFF
240
243
323
CHANGE CONFIGURATION
PARAMETERS
VERIFY TEST, ESTOP,
& HVS INPUTS
or
TEST SHUTDOWN INPUT
IS ON
or
EMERGENCY STOP INPUT
IS ON
or
HI VOLTAGE SHUTDOWN
INPUT IS ON
324
VIEW THE ALARM LOG
437
PCU B#-ID#/N#
RECOGNIZED
or
DSM B#-P#A/B
RECOGNIZED
or
I/O B#-P#
RECOGNIZED
or
CRM B#
RECOGNIZED
or
RCB B#-P#
RECOGNIZED
438
241
GO TO FUNCTION MENU
242
GO BACK TO MENU TREE
BEGINNING
229
230
244
251
252
253
CHANGE I/O BOARD
PARAMETERS
AUDIBLE SILENT TIME
= mm MINUTES
or
AUDIBLE ALARMS STAY
SILENCED
to
(Sheet 4 of 4)
255
310
315
NO TEMPERATURE
COMPENSATION
or
TEMPERATURE SLOPE
= 0.vvvV/°C/F
264
317
318
319
320
320A
GO TO FUNCTION MENU
238
GO BACK TO MENU TREE
BEGINNING
265
266
267
268
269
270
271
272
273
274
275
245
246
247
248
I/O BOARD
CONFIGURATION MENU
ANALOG INPUT B#-P# IS
DISTRIBUTION
or
ANALOG INPUT B#-P# IS
AUXILIARY
276
277
278
279
ANALOG INPUT B#-P#
50mV = aaaaaA
ANALOG OUTPUT B#-P#
50mV = aaaaaA
BINARY INPUT B#-P#-I#
ALARM = CLOSED
or
BINARY INPUT B#-P#-I#
ALARM = OPEN
280
281
282
283
249 GO TO CONFIGURE MENU
250
GO BACK TO MENU TREE
BEGINNING
256
DEFINE RELAY
FUNCTION A#
257
GO TO CONFIGURE MENU
258
GO BACK TO MENU TREE
BEGINNING
/_2+ ROUTER FAILURES
289
290
RELAY ASSIGNMENT MENU
291
312
ASSIGN RELAY B#-P#-R#
FUNCTION A#
292
313
GO TO CONFIGURE MENU
314
GO BACK TO MENU TREE
BEGINNING
293
294
295
296
297
298
299
to
D
300
(This sheet)
301
MAXIMUM COMPENSATION
= vv.vvV
MINIMUM COMPENSATION
= vv.vvV
NOW DISPLAYING °C/F
SET TO °C/F?
IT IS NOW hh:mm:ss
dd-mon-yy
from
E
(This sheet)
302
303
304
to
ERASE THE ALARM LOG
PCU MAPPING MENU
(NS702/801 ONLY)
CHANGE NETWORK
ADDRESSES
ARRANGE PCU ORDER
321A
BAY ##
322
GO TO FUNCTION MENU
321B
GO TO CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
321C
GO BACK TO MENU TREE
BEGINNING
F
(This sheet)
from
G
(This sheet)
/_1 PCU FAILURE
'MAJOR' TYPE
/_2+ PCU FAILURES
'MAJOR' TYPE
/_1 PCU FAILURE
'MINOR' TYPE
/_2+ PCU FAILURES
'MINOR' TYPE
/_NO PCUs ARE
IN INVENTORY
/_1 DIST. PANEL
FAILURE
/_2+ DIST. PANEL
FAILURES
/_NO DIST. PANELS
IN INVENTORY
/_1 I/O BOARD
FAILURE
/_2+ I/O BOARD
FAILURES
/_NO I/O BOARDS ARE
IN INVENTORY
285
288
305
306
307
308
309
214
215
/_EMERGENCY STOP
INPUT ACTIVE
/_HI VOLTAGE SHUTDOWN
INPUT ACTIVE
/_ALTERNATE CURRENT
LIMIT ACTIVE
/_SYSTEM VOLTAGE IS
VERY LOW
/_SYSTEM BATTERY ON
DISCHARGE
/_SYSTEM HIGH VOLTAGE
#1 ALARM
/_SYSTEM HIGH VOLTAGE
#2 ALARM
/_1 SYSTEM BREAKER OR
FUSE ALARM
/_2+ SYSTEM BREAKER &
FUSE ALARMS
/_AC POWER IS OFF TO
1 PCU
/_AC POWER IS OFF TO
2+ PCUs
/_AC POWER IS OFF TO
ALL PCUs
/_1 PCU FAILURE
ANY TYPE
/_2+ PCU FAILURES
ANY TYPE
/_1 ROUTER FAILURE
287
SYSTEM ADJUSTMENT MENU
CHECKED CONDITIONS
DE-ENERGIZE
or
CHECKED CONDITIONS
ENERGIZE
284
286
RELAY FUNCTION MENU
321
322A
262
237
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
316
261
261A
263
236
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
DEFINE RELAY
FUNCTIONS
START RELAY FUNCTION
TEST
or
TIME PER FUNCTION
= hh:mm:ss
or
TIME PER FUNCTION
NO TIMEOUT
or
AUTOMATICALLY TEST
ALL FUNCTIONS
or
TEST RELAY FUNCTION
A#
or
STOP RELAY FUNCTION
TEST
or
TESTING FUNCTION A#
= hh:mm:ss
or
TESTING FUNCTION A#
NO TIMEOUT
311
260
HIGH TEMPERATURE #1
= ttt°C/F
or
NO HIGH TEMPERATURE
#1 ALARM
HIGH TEMPERATURE #2
= ttt°C/F
or
NO HIGH TEMPERATURE
#2 ALARM
LOW TEMPERATURE #1
= ttt°C/F
or
NO LOW TEMPERATURE
#1 ALARM
LOW TEMPERATURE #2
= ttt°C/F
or
NO LOW TEMPERATURE
#2 ALARM
235
AUTO EQUALIZE IS
DISABLED
or
AUTO EQUALIZE FOR ##
x DISCHARGE
or
END AUTO EQUALIZE IN
hhh.hh HOURS
ASSIGN RELAYS TO
FUNCTIONS
BATTERY ON DISCHARGE
= vv.vvV
VERY LOW VOLTAGE
= vv.vvV
TOTAL LOAD CURRENT
= aaaaaA
DISTRIBUTION GROUP B
= aaaaaA
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
254
259
232
234
TEST EQUALIZE IS DISABLED
or
MANUAL TEST/EQUALIZE
= hh HOURS
or
TEST/EQUALIZE STOP
IS MANUAL
or
END TEST/EQUALIZE IN
hh.hh HOURS
SYSTEM HI VOLTAGE #2
= vv.vvV
DISTRIBUTION GROUP A
= aaaaaA
233
PCU SEQUENCING IS
DISABLED
or
PCU SEQUENCING DELAY
= ss SECONDS
RELAY FUNCTION DEFINITION MENU
231
CONFIGURE MENU
GO BACK TO MENU TREE
BEGINNING
C
PCU ENABLE MENU
PCU B#-ID#/N# ON
TURN IT OFF?
or
PCU B#-ID#/N# OFF
TURN IT ON?
ALARM ADJUSTMENT MENU
SYSTEM HI VOLTAGE #1
= vv.vvV
/_NO ROUTERS ARE
IN INVENTORY
/_1 RELAY BOARD
FAILURE
/_2+ RELAY BOARD
FAILURES
/_NO RELAY BOARDS ARE
IN INVENTORY
/_HIGH TEMPERATURE #1
ALARM
/_HIGH TEMPERATURE #2
ALARM
/_LOW TEMPERATURE #1
ALARM
/_LOW TEMPERATURE #2
ALARM
/_TEMPERATURE SENSOR
NO SIGNAL
/_MAJOR MONITORING
ALARM(S)
/_MINOR MONITORING
ALARM(S)
/_All Monitoring LED
Messages
/_MONITORING DOES NOT
RESPOND
/_CONTROLLER FAILURE
216
217
218
218A
219
FLOAT SETPOINT
= vv.vvV
TEST/EQUALIZE
= vv.vvV
POWER SHARE IS OFF
TURN IT ON?
or
POWER SHARE IS ON
TURN IT OFF?
or
ALT. LIMIT IS OFF
TURN IT ON?
or
ALT. LIMIT IS ON
TURN IT OFF?
or
TURN OFF POWER SHARE
or
TURN OFF ALTERNATIVE
CURRENT LIMIT
or
TURN OFF TEMPERATURE
COMPENSATION
PS INITIAL CAPACITY
LIMIT = ###%
PS VOLTAGE OFFSET
= v.vV
ALTERNATE CURRENT
LIMIT = ###%
HI VOLTAGE SHUTDOWN
= vv.vvV
TEST H.V. SHUTDOWN
= vv.vvV
220
LOSS IS POSSIBLE. GO
AHEAD ANYWAY?
221
PCU CURRENT LIMIT
= aaaaaA
or
PCU CURRENT LIMIT
ALT. LIMIT
or
PCU CURRENT LIMIT
POWER SHARE
222
100% PCU CURRENT IS
aaaaaA
223
GO TO FUNCTION MENU
224
GO BACK TO MENU TREE
BEGINNING
NETWORK ADDRESS MENU
from
D
(This sheet)
320B
320C
320D
to
E
(This sheet)
from
320E
###.###.###.###
GATEWAY
320F
VALIDATE THE ADDRESS
CHANGES?
or
UPDATE/RESTART LMS
WITH CHANGES?
or
THE CHANGES WERE
REJECTED
320G
GO TO CONFIGURE MENU
320H
GO BACK TO MENU TREE
BEGINNING
F
(This sheet)
321D
321E
to
G
(This sheet)
##.##.##.##.##
MAC ADDRESS
###.###.###.###
IP ADDRESS
###.###.###.###
NET MASK
SN# IN SLOT
POSITION ##
SAVE PCU MAPPING
or
DUPLICATE MAPPING
DETECTED
321F
GO TO CONFIGURE MENU
321G
GO BACK TO MENU TREE
BEGINNING
/_THE CONTROLLER IS
INITIALIZING
/_TOTAL LOAD CURRENT
ALARM
/_DIST. GROUP A
LOAD ALARM
/_DIST. GROUP B
LOAD ALARM
/_THE DISPLAY DOES
NOT RESPOND
/_TEST/EQUALIZE MODE
IS ACTIVE
/_THE AUDIBLE ALARM
IS ACTIVE
/_AUDIBLE ALARMS ARE
SILENCED
GO TO RELAY FUNCTION
MENU
GO BACK TO MENU TREE
BEGINNING
Page 5 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MCA Display (Lines 3 and 4)
(Sheet 4 of 4)
Section 5886
Issue AF, October 25, 2011
MCA Menu Tree
(MCA Software Version 2.3.0.5)
from
(Sheet 3 of 5)
E
MCA ALARM
LOG DETAIL MENU
ALARM LOG MENU
325
dd-mon-yy hh:mm:ss /
CONTROLLER
356
dd-mon-yy hh:mm:ss /
B#-SN#
384
dd-mon-yy hh:mm:ss /
PANEL B#-P#A/B
400
dd-mon-yy hh:mm:ss /
I/O B#-P#
411
dd-mon-yy hh:mm:ss /
ROUTER B#
425
dd-mon-yy hh:mm:ss /
RELAY B#-P#
435
GO TO FUNCTION MENU
436
GO BACK TO MENU TREE
BEGINNING
326
PCU ALARM
LOG DETAIL MENU
DISTRIBUTION ALARM
LOG DETAIL MENU
385
386
387
388
389
391
412
413
414
415
416
417
418
419
420
421
422
ROUTER ALARM
LOG DETAIL MENU
ROUTER B#
NO ALARMS
ROUTER B# REMOTE
SENSE OPEN
ROUTER B# INTERNAL
SENSE OPEN
ROUTER B# PROCESSOR
FAILURE
ROUTER B# REPORTS AN
ILLEGAL NODE
ROUTER B# IS
DUPLICATED
423
GO TO ALARM LOG MENU
424
GO BACK TO MENU TREE
BEGINNING
426
RELAY ALARM
LOG DETAIL MENU
RELAY BOARD B#-P#
NO ALARMS
RELAY B#-P#-R# IS
STUCK
DIST. PANEL B#-P#A/B
LVD FAILURE
392
DIST. PANEL B#-P#A/B
A/B CHANGED
394
395
ROUTER B# DOES NOT
RESPOND
ROUTER B# REMOTE
SENSE vv.vvV
ROUTER B# INTERNAL
SENSE vv.vvV
SYSTEM OUTPUT SENSE
vv.vvV
TOTAL LOAD CURRENT
aaaaaA
428
429
430
431
433
GO TO ALARM LOG MENU
434
GO BACK TO MENU TREE
BEGINNING
439
SYSTEM OUTPUT SENSE
vv.vvV
397
TOTAL LOAD CURRENT
aaaaaA
398
GO TO ALARM LOG MENU
399
GO BACK TO MENU TREE
BEGINNING
401
402
403
405
406
407
408
PCU REPLACEMENT
MENU
REPLACE ### PCUs?
AUTO IN ###
440
REPLACE ### PCUs
MANUALLY?
444
REPOPULATE ### SLOTS?
AUTO IN ### ?
360
361
362
363
364
365
366
367
368
369
370
371
372
373
I/O BOARD ALARM
LOG DETAIL MENU
RELAY BOARD B#-P# IS
DUPLICATED
RELAY BOARD B#-P#
NO RESPONSE
SYSTEM OUTPUT SENSE
vv.vvV
TOTAL LOAD CURRENT
aaaaaA
359
374
RELAY BOARD B#-P#
PROCESSOR
432
358
DIST. PANEL B#-P#A/B
PROCESSOR
DIST. PANEL B#-P#A/B IS
DUPLICATED
DIST. PANEL B#-P#A/B
NO RESPONSE
396
404
427
DIST. PANEL B#-P#A/B
NO ALARMS
DIST. PANEL B#-P#A/B
DISCONNECTED
POSITION B#-P#A/B
IS OPEN
POSITION B#-P#A/B
NOT FOUND
or
POSITION NOT FOUND
PANEL B#-P#A/B
POSITION B#-P#A/B
TYPE UNKNOWN
POSITION B#-P#A/B
OVER CURRENT
391
393
357
375
I/O BOARD B#-P#
NO ALARMS
376
I/O BOARD B#-P#
BINARY I#
I/O BOARD B#-P#
OVER CURRENT
I/O BOARD B#-P#
PROCESSOR
I/O BOARD B#-P#
IS DUPLICATED
377
378
I/O BOARD B#-P#
NO RESPONSE
379
SYSTEM OUTPUT SENSE
vv.vvV
TOTAL LOAD CURRENT
aaaaaA
380
409
GO TO ALARM LOG MENU
410
GO BACK TO MENU TREE
BEGINNING
PCU B#-SN#
NO ALARMS
PCU B#-SN#
EMERG. STOP
PCU B#-SN#
H.V. SHUTDOWN
PCU B#-SN#
AC LINE OFF
PCU B#-SN#
AC LINE LOW
PCU B#-SN#
AC LINE HIGH
PCU B#-SN#
AC PHASE LOST
PCU B#-SN#
POWER FACTOR
PCU B#-SN#
DC/DC CONV.
PCU B#-SN#
FUSE/BREAKER
PCU B#-SN#
INHIBITED
PCU B#-SN#
ON STANDBY
PCU B#-SN#
THERMAL LIMIT
PCU B#-SN#
THERMAL STOP
PCU B#-SN#
HIGH AMBIENT
PCU B#-SN#
LOAD SHARE
PCU B#-SN#
1 FAN SPEED
PCU B#-SN#
2+ FANS SPEED
PCU B#-SN#
NO VOLT SENSE
PCU B#-SN#
DUPLICATED
PCU B#-SN#
NO RESPONSE
PCU B#-SN#
TURNED ON
or
PCU B#-SN#
TURNED OFF
PCU B#-SN#
aaaaaA
SYSTEM OUTPUT SENSE
vv.vvV
327
328
328A
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
SYSTEM CONTROLLER
NO ALARMS
EMERGENCY STOP
INPUT ACTIVE
HI VOLTAGE SHUTDOWN
INPUT ACTIVE
ALTERNATE CURRENT
LIMIT ACTIVE
SYSTEM VOLTAGE IS
VERY LOW
SYSTEM BATTERY IS ON
DISCHARGE
SYSTEM HIGH VOLTAGE
#1 ALARM
SYSTEM HIGH VOLTAGE
#2 ALARM
NO PCUs ARE
IN INVENTORY
NO DIST. PANELS ARE
IN INVENTORY
NO ROUTERS ARE
IN INVENTORY
NO RELAY BOARDS ARE
IN INVENTORY
HIGH TEMPERATURE #1
ALARM
HIGH TEMPERATURE #2
ALARM
LOW TEMPERATURE #1
ALARM
LOW TEMPERATURE #2
ALARM
TEMPERATURE SENSOR
NO SIGNAL
MAJOR MONITORING
ALARM(S)
MINOR MONITORING
ALARM(S)
Monitoring LED
Messages
MONITORING DOES NOT
RESPOND
CONTROLLER FAILURE
####
THE CONTROLLER IS
INITIALIZING
TOTAL LOAD CURRENT
ALARM
GROUP A LOAD CURRENT
ALARM
GROUP B LOAD CURRENT
ALARM
THE DISPLAY DOES NOT
RESPOND
SYSTEM OUTPUT SENSE
vv.vvV
TOTAL LOAD CURRENT
aaaaaA
381
TOTAL LOAD CURRENT
aaaaaA
382
GO TO ALARM LOG MENU
353
383
GO BACK TO MENU TREE
BEGINNING
354
GO TO ALARM LOG MENU
355
GO BACK TO MENU TREE
BEGINNING
352
MANUAL PCU
REPLACEMENT MENU
(NS702/801 only)
441
BAY ###
442
REPLACE PCU B#-P#
443 REPLACE PCU B#-P# W/
SN#
Page 6 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MCA Menu Tree
(MCA Software Version 2.3.0.5)
Section 5886
Issue AF, October 25, 2011
REVISION RECORD
Issue
Change
Number
(ECO)
AA
LLP035201
New
AB
LLP203036
Updated for MCA version 1.2.0.1
AC
LLP210933
Updated for MCA version 2.0.0.21 (relay test feature enhanced, Power Share
feature added [legacy rectifier interface], support for 582140001 added).
AD
LLP212061
AE
LLP213082
Updated for MCA Version 2.1.0.4 (System Load Menu Added, PCU/Rectifier
MCA Identification Changed)
Updates for MCA version 2.2.0.6.
AF
LLP214855
Updated for MCA Version 2.3.0.5 (PCU mapping menu added).
Description of Change
Emerson Network Power, Energy Systems, North America, Inc.
4350 Weaver Parkway, Warrenville, IL 60555
Toll Free: 800-800-1280 (USA and Canada)
Telephone: 440-246-6999 Fax: 440-246-4876
Web: EmersonNetworkPower.com/EnergySystems
EnergyNet: Secure.EmersonNetworkPower.com
Page 7 of 7
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.