Emerson Protection Panels Brochures and Data Sheets

Protection Panels
Key Features
nHigh density panels
save rack space
nThe patented Emerson
silo protector block
improves attenuation,
cross talk and
insulation resistance
nConnectorized and
non-connectorized
versions are available
nGold-plated protector
module sockets
provide superior
electrical contact and
eliminate noise
problems
Protect sensitive electronic equipment from
overvoltages in central office, building entrance
and remote terminal applications.
Description
Protection panels protect sensitive electronic equipment from overvoltages in indoor
racks and outdoor remote terminals. These front access protection panels are configured
for industry standard 5-pin protector modules (sold separately). Connectorized and non
connectorized versions are available for installation on 19-in. or 23-in. racks.
Application
Protector panels are used in central office, building entrance and remote terminal applications and can be rack mounted to protect personnel and equipment from abnormal
voltages and currents (ie., lightning strikes, on incoming cable pairs).
Note: Other protection panels, as well as connectorized and non-connectorized custom configurations can be provided. Call Emerson for additional information.
PROT23100NW
OSPDS-095300 / 1213
1
Protection Panels
Ordering Information – Connectorized
Catalog
Number
Part
Number
 Equipment Side 
Cable Length
Connector Type
 Field Side 
Cable Length
Connector Type
Figure
Number
Connectorized Protection Panels for 19" Racks (3.47"H x 19"W x 1.57"D)
100-pr. protection panel with 25-pr. 24AWG cable on both the equipment and field side
PROT100AC3W3MGP
F1005793
3-ft.
AMP RJ21 Plug
3-ft.
3M 4005-DPM (MS2), Dry
1
PROT100AC3GR
F1007688
3-ft.
AMP RJ21 Receptacles
3-ft.
AMP RJ21 Receptacles
1
100DIG3M40054
F003041
4-ft.
3M 4005-DPM (MS2), Dry
5-ft. 2-in.
3M 4005-DPM (MS2), Dry
1
100DIGNTMA
F1001738
14-ft.
AMP RJ21 Receptacles
14-ft.
3M 4005-DPM (MS2), Dry
1
PNL100PRPROT
F989050
5-ft. 2-in.
710, Dry
4-ft.
710, Gel-Filled
1
100PROCAT5EPROTPNL
F1008027*
10-ft.
AMP RJ21 Plug
5-ft.
710, Gel-Filled
1
None
2
Connectorized Protection Panels for 23" Racks (3.47"H x 23"W x 1.57"D)
100-pr. protection panel with 25-pr. 24AWG cable on the equipment side and 26AWG on the field side
100PRPROTPNLMSPAN
F1006640
10-ft.
None
10-ft.
*Pairs 49, 50, 99 & 100 are not wired (dead pairs).
Ordering Information – Non-Connectorized
Diagrams
Catalog
Number
Figure 1
Part
Number
Description
H
W
D
Figure
Number
Non-Connectorized, Wire-Wrap Terminated Protection Panels
PROT19100NW
F1008036
PROT23100NW
F1007915
PROT19200NW
F1008046
100-pr.
protection
panel
100-pr.
protection
panel
200-pr.
protection
panel
3.47" 19"
3"
1
3.47" 23"
3"
2
6.63" 19"
3"
3
Accessories
Catalog
Number
Part
Number
RACKADAPTKIT
F1008503
Figure 2
Figure 3
Description
Bracket adapter kit for mounting 19"
protection panel (100-pr. only) onto 23" rack
EmersonNetworkPower.com/EnergySystems (North America)
EmersonNetworkPower.eu/EnergySystems (EMEA)
© Emerson Network Power Energy Systems North America 2013.
Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson® and Consider it Solved are service marks and
trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson
Network Power Energy Systems North America. Any other product, brand, or company names or logos are the property of the respective owner.
2
While every precaution has been taken to ensure accuracy and
completeness herein, Emerson Electric Co. assumes no responsibility,
and disclaims all liability, for damages resulting from use of this
information or for any errors or omissions. Specifications subject to
change without notice.
OSPDS-095300 / 1213