advertisement
Features
Real-Time Power Quality Measurements
Measures and records the magnitude and duration of transient surges (ANSI/IEEE category A, B and C), sags, swells, RMS voltage, crest factor, voltage unbalance, phase loss/outages, dropouts, voltage harmonic distortion and frequency.
Date/Time Stamp and Event Logging
Records and logs device software/firmware updates, alarms, SPD health and magnitude/duration/ history of all measured power quality events. On board memory logs up to 1,000 events, data export feature enables long-term storage and reporting of event history.
SPD Health Status
Health of the SPD is continually monitored and percent protection available for each phase recorded and communicated.
User-Friendly Display
Equipped with an easy to read 128x64 pixel LCD display screen. Capacitive touch navigation buttons provide access to over 25 informational data display screens.
Easy Installation
Integrated directly within the 570, 560, 510, 460 or
440 surge protection devices. The optional remote monitoring panel allows the user display to be mounted in custom locations.
Multiple Alarms Thresholds
Multiple alarm conditions–9 preset triggered alarm conditions with the capability for user-modified threshold. Alarms are configurable as audible, relay, or both providing complete control of event notifications.
Multi-Port Serial and Ethernet Communications
Communicate, view and access data remotely via two RS-485 modbus TCP/RTU serial ports or an ethernet RJ-45 port.
Management Tools
Embedded webpage enables the end user to remotely monitor real time measurements, adjust event thresholds and easily analyze recorded data from several positions throughout a facilities power system, simultaneously from a single location.
System Compatibility
Fully integrates into ASCO 5700 and 5900 family of
PowerQuest products.
Embedded Webpage
Real-Time Monitoring of Voltages,
Event Counts and SPD Health Status
Power Quality Events Measured and Recorded in Detail
Manage Your System with User
Configurable Thresholds and
Power Quality Reporting
For further assistance in choosing the proper surge protective devices for your facility, contact us at:
800-288-6169 ext. 3 (U.S. and Canada Only)
607-721-8840 ext. 3 (Outside U.S.) or
Email: [email protected]
We’re here to help!
Emerson Network Power
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
800 288 6169 Phone (U.S. & Canada Only)
607 721 8840 Phone (Outside U.S.)
607 722 8713 FAX
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
© 2014 Emerson Network Power. All rights reserved throughout the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.
SL-70109 (R0 1/15) Printed in USA
EmersonNetworkPower.com/Surge
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2014 Emerson Electric Co.
Advanced Transient Detection System
Surge Protection that Monitors, Measures and Manages
A Web-Based Power Quality
Monitor Integrated within the Emerson Network Power
500 and 400 Series Surge
Protective Devices
• Power Quality – Ability to monitor voltage
at every connected panel and track system
anomalies such as transients, surges,
swells and VTHDs.
• Real Time Measurements – Allows over
1000 events/reports to be stored for
future analysis.
• Event Logging – User configurable
alarm thresholds, time/date stamp,
duration and magnitude of events.
• Communications – Information easily
accessed through the Ethernet or MODBUS
TCP/RTU communication systems.
• Embedded Web Page – Convenient
access to present and past data right at
the device.
• System Analysis – Manage power system
with statistical summaries and reporting
software.
Surge Protective Devices Equipped with Advanced
Transient Detection and Power Quality Analysis
Emerson Network Power makes it easy to monitor your electrical system by integrating its advanced transient detection and monitoring package within its surge protective devices. The web-based device is integrated within our 500 and 400 series of surge protection products, enabling real-time power quality measurements, logged events, statistical summaries and premium power protection. Understanding the severity, type and timing of the event allows you to analyze trends and ultimately better manage your electrical system.
Network Computer
Our Web-Enabled Approach to
Monitoring Your Power...
Internet
Service Entrance
570 560
Distribution Branch Locations
440 440
570
560
510
460
Recommended Emerson Network Power
Surge Protective Devices: 570, 560, 510, 460, 440 LAN Connection LAN Connection
Modular device, available models are:
570/560/510 and 460.
Non-modular device,
440 model only.
Available On:
570 SPD
560 SPD
510 SPD
460 SPD
440 SPD
General Specifications
Voltage
Accuracy
Range
Average, Unbalance, Crest Factor
Frequency
Accuracy
Range
VTHD
Range
Harmonics
Range
RMS
SPD Health Status
I/O
Relay Outputs
RJ-45 Port
Terminals (#24-#14)
Events
Event Logging
Phase A, B, & C
±1%
0-600V
Standard
Per Phase + Total
±1%
45-67Hz
L-N, L-L
850 Hz
L-N, L-L
Fundamental - 13th
±1%
Percent Remaining
Standard
1:2 Form-C
Ethernet
RS-485 Communication
Power Quality and System
1000+ Events
Surge, Sag, Swell, Phase Loss/Outage,
Temporary Over Voltage (TOV), Voltage
Interruption/Dropout, Neutral Bond, Voltage
Harmonics (VTHD), Over/Under Frequency,
Protection Failure
Standard
Date/Time Stamp with Duration/Magnitude Standard - All events
Surge Counter, Sag Counter, Swell Counter, w/reset
Standard
Display
Communications
Embedded Webpage
LCD 128x64
RS-485, MODBUS TCP/RTU,
Ethernet, SNMP, SMTP, Form C
Standard
Available with remote monitoring panel for custom installations.
Models include: 570/560
Model Number x
Indicates
Standard
Model Number
Configuration
Ordering Information
Example Model Number:
5 7 0 x x x x x x x T x S
Monitoring
T
Indicates
Advanced
Transient
Detection
System
Additional Options/Accessories
X
S
=Standard
-or-
=Additional Options/Accessories*
(*remote panel)
*Consult factory for additional source configurations, surge ratings, monitoring options, enclosure ratings, etc.
Advanced Transient Detection Interface
5
1
L1 L2 L3 N SERVICE
Surge Protective Device
L-L Avg V
Surge Count
2 208.0V
57
IP Address 10.203.97.86
Current Alarms
Prev Page
None
Next Page
BACK UP DOWN
PUSH TOGETHER TO
SILENCE ALARM
ENTER
(Front of User Interface Display)
3
1 Protection Status LED’s
Red, green and orange (reduced protection) LEDs provide protection status indication for each phase, neutral and service.
2 LCD Display Screen
The advanced transient detection monitoring feature provides 25+ individual and selectable display screens.
Each screen provides real-time information concerning the existing power quality, past recorded events and networking.
3 Display Navigation Buttons
Capacitive touch buttons are utilized to maneuver from screen to screen.
4
4 RJ-45 Ethernet Connection
A female RJ-45 Ethernet connection port provides quick and trouble-free network communication with your
SPD/transient detection system.
5 RS-485
Two standard RS-485 ports for ModBus RTU connection
6 Form ‘C’ Relay Contacts
Two complete sets of individually configurable form C relay contacts, provides control for a variety of normally open and normally closed contact applications.
6
Expanded Communications
Backside of User Interface Display
Features
Real-Time Power Quality Measurements
Measures and records the magnitude and duration of transient surges (ANSI/IEEE category A, B and C), sags, swells, RMS voltage, crest factor, voltage unbalance, phase loss/outages, dropouts, voltage harmonic distortion and frequency.
Date/Time Stamp and Event Logging
Records and logs device software/firmware updates, alarms, SPD health and magnitude/duration/ history of all measured power quality events. On board memory logs up to 1,000 events, data export feature enables long-term storage and reporting of event history.
SPD Health Status
Health of the SPD is continually monitored and percent protection available for each phase recorded and communicated.
User-Friendly Display
Equipped with an easy to read 128x64 pixel LCD display screen. Capacitive touch navigation buttons provide access to over 25 informational data display screens.
Easy Installation
Integrated directly within the 570, 560, 510, 460 or
440 surge protection devices. The optional remote monitoring panel allows the user display to be mounted in custom locations.
Multiple Alarms Thresholds
Multiple alarm conditions–9 preset triggered alarm conditions with the capability for user-modified threshold. Alarms are configurable as audible, relay, or both providing complete control of event notifications.
Multi-Port Serial and Ethernet Communications
Communicate, view and access data remotely via two RS-485 modbus TCP/RTU serial ports or an ethernet RJ-45 port.
Management Tools
Embedded webpage enables the end user to remotely monitor real time measurements, adjust event thresholds and easily analyze recorded data from several positions throughout a facilities power system, simultaneously from a single location.
System Compatibility
Fully integrates into ASCO 5700 and 5900 family of
PowerQuest products.
Embedded Webpage
Real-Time Monitoring of Voltages,
Event Counts and SPD Health Status
Power Quality Events Measured and Recorded in Detail
Manage Your System with User
Configurable Thresholds and
Power Quality Reporting
For further assistance in choosing the proper surge protective devices for your facility, contact us at:
800-288-6169 ext. 3 (U.S. and Canada Only)
607-721-8840 ext. 3 (Outside U.S.) or
Email: [email protected]
We’re here to help!
Emerson Network Power
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
800 288 6169 Phone (U.S. & Canada Only)
607 721 8840 Phone (Outside U.S.)
607 722 8713 FAX
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
© 2014 Emerson Network Power. All rights reserved throughout the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.
SL-70109 (R0 1/15) Printed in USA
EmersonNetworkPower.com/Surge
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2014 Emerson Electric Co.
Advanced Transient Detection System
Surge Protection that Monitors, Measures and Manages
A Web-Based Power Quality
Monitor Integrated within the Emerson Network Power
500 and 400 Series Surge
Protective Devices
• Power Quality – Ability to monitor voltage
at every connected panel and track system
anomalies such as transients, surges,
swells and VTHDs.
• Real Time Measurements – Allows over
1000 events/reports to be stored for
future analysis.
• Event Logging – User configurable
alarm thresholds, time/date stamp,
duration and magnitude of events.
• Communications – Information easily
accessed through the Ethernet or MODBUS
TCP/RTU communication systems.
• Embedded Web Page – Convenient
access to present and past data right at
the device.
• System Analysis – Manage power system
with statistical summaries and reporting
software.
Surge Protective Devices Equipped with Advanced
Transient Detection and Power Quality Analysis
Emerson Network Power makes it easy to monitor your electrical system by integrating its advanced transient detection and monitoring package within its surge protective devices. The web-based device is integrated within our 500 and 400 series of surge protection products, enabling real-time power quality measurements, logged events, statistical summaries and premium power protection. Understanding the severity, type and timing of the event allows you to analyze trends and ultimately better manage your electrical system.
Network Computer
Our Web-Enabled Approach to
Monitoring Your Power...
Internet
Service Entrance
570 560
Distribution Branch Locations
440 440
570
560
510
460
Recommended Emerson Network Power
Surge Protective Devices: 570, 560, 510, 460, 440 LAN Connection LAN Connection
Modular device, available models are:
570/560/510 and 460.
Non-modular device,
440 model only.
Available On:
570 SPD
560 SPD
510 SPD
460 SPD
440 SPD
General Specifications
Voltage
Accuracy
Range
Average, Unbalance, Crest Factor
Frequency
Accuracy
Range
VTHD
Range
Harmonics
Range
RMS
SPD Health Status
I/O
Relay Outputs
RJ-45 Port
Terminals (#24-#14)
Events
Event Logging
Phase A, B, & C
±1%
0-600V
Standard
Per Phase + Total
±1%
45-67Hz
L-N, L-L
850 Hz
L-N, L-L
Fundamental - 13th
±1%
Percent Remaining
Standard
1:2 Form-C
Ethernet
RS-485 Communication
Power Quality and System
1000+ Events
Surge, Sag, Swell, Phase Loss/Outage,
Temporary Over Voltage (TOV), Voltage
Interruption/Dropout, Neutral Bond, Voltage
Harmonics (VTHD), Over/Under Frequency,
Protection Failure
Standard
Date/Time Stamp with Duration/Magnitude Standard - All events
Surge Counter, Sag Counter, Swell Counter, w/reset
Standard
Display
Communications
Embedded Webpage
LCD 128x64
RS-485, MODBUS TCP/RTU,
Ethernet, SNMP, SMTP, Form C
Standard
Available with remote monitoring panel for custom installations.
Models include: 570/560
Model Number x
Indicates
Standard
Model Number
Configuration
Ordering Information
Example Model Number:
_ _ _ _ _ _ _ _ _ _ _ _ _
Monitoring
T
Indicates
Advanced
Transient
Detection
System
Additional Options/Accessories
X
S
=Standard
-or-
=Additional Options/Accessories*
(*remote panel)
*Consult factory for additional source configurations, surge ratings, monitoring options, enclosure ratings, etc.
Advanced Transient Detection Interface
5
1
L1 L2 L3 N SERVICE
Surge Protective Device
L-L Avg V
Surge Count
2 208.0V
57
IP Address 10.203.97.86
Current Alarms
Prev Page
None
Next Page
BACK UP DOWN
PUSH TOGETHER TO
SILENCE ALARM
ENTER
(Front of User Interface Display)
3
1 Protection Status LED’s
Red, green and orange (reduced protection) LEDs provide protection status indication for each phase, neutral and service.
2 LCD Display Screen
The advanced transient detection monitoring feature provides 25+ individual and selectable display screens.
Each screen provides real-time information concerning the existing power quality, past recorded events and networking.
3 Display Navigation Buttons
Capacitive touch buttons are utilized to maneuver from screen to screen.
4
4 RJ-45 Ethernet Connection
A female RJ-45 Ethernet connection port provides quick and trouble-free network communication with your
SPD/transient detection system.
5 RS-485
Two standard RS-485 ports for ModBus RTU connection
6 Form ‘C’ Relay Contacts
Two complete sets of individually configurable form C relay contacts, provides control for a variety of normally open and normally closed contact applications.
6
Expanded Communications
Backside of User Interface Display
Surge Protective Devices Equipped with Advanced
Transient Detection and Power Quality Analysis
Emerson Network Power makes it easy to monitor your electrical system by integrating its advanced transient detection and monitoring package within its surge protective devices. The web-based device is integrated within our 500 and 400 series of surge protection products, enabling real-time power quality measurements, logged events, statistical summaries and premium power protection. Understanding the severity, type and timing of the event allows you to analyze trends and ultimately better manage your electrical system.
Network Computer
Our Web-Enabled Approach to
Monitoring Your Power...
Internet
Service Entrance
570 560
Distribution Branch Locations
440 440
570
560
510
460
Recommended Emerson Network Power
Surge Protective Devices: 570, 560, 510, 460, 440 LAN Connection LAN Connection
Modular device, available models are:
570/560/510 and 460.
Non-modular device,
440 model only.
Available On:
570 SPD
560 SPD
510 SPD
460 SPD
440 SPD
General Specifications
Voltage
Accuracy
Range
Average, Unbalance, Crest Factor
Frequency
Accuracy
Range
VTHD
Range
Harmonics
Range
RMS
SPD Health Status
I/O
Relay Outputs
RJ-45 Port
Terminals (#24-#14)
Events
Event Logging
Phase A, B, & C
±1%
0-600V
Standard
Per Phase + Total
±1%
45-67Hz
L-N, L-L
850 Hz
L-N, L-L
Fundamental - 13th
±1%
Percent Remaining
Standard
1:2 Form-C
Ethernet
RS-485 Communication
Power Quality and System
1000+ Events
Surge, Sag, Swell, Phase Loss/Outage,
Temporary Over Voltage (TOV), Voltage
Interruption/Dropout, Neutral Bond, Voltage
Harmonics (VTHD), Over/Under Frequency,
Protection Failure
Standard
Date/Time Stamp with Duration/Magnitude Standard - All events
Surge Counter, Sag Counter, Swell Counter, w/reset
Standard
Display
Communications
Embedded Webpage
LCD 128x64
RS-485, MODBUS TCP/RTU,
Ethernet, SNMP, SMTP, Form C
Standard
Available with remote monitoring panel for custom installations.
Models include: 570/560
Model Number x
Indicates
Standard
Model Number
Configuration
Ordering Information
Example Model Number:
5 7 0 x x x x x x x T x S
Monitoring
T
Indicates
Advanced
Transient
Detection
System
Additional Options/Accessories
X
S
=Standard
-or-
=Additional Options/Accessories*
(*remote panel)
*Consult factory for additional source configurations, surge ratings, monitoring options, enclosure ratings, etc.
Advanced Transient Detection Interface
5
1
L1 L2 L3 N SERVICE
Surge Protective Device
L-L Avg V
Surge Count
2 208.0V
57
IP Address 10.203.97.86
Current Alarms
Prev Page
None
Next Page
BACK UP DOWN
PUSH TOGETHER TO
SILENCE ALARM
ENTER
(Front of User Interface Display)
3
1 Protection Status LED’s
Red, green and orange (reduced protection) LEDs provide protection status indication for each phase, neutral and service.
2 LCD Display Screen
The advanced transient detection monitoring feature provides 25+ individual and selectable display screens.
Each screen provides real-time information concerning the existing power quality, past recorded events and networking.
3 Display Navigation Buttons
Capacitive touch buttons are utilized to maneuver from screen to screen.
4
4 RJ-45 Ethernet Connection
A female RJ-45 Ethernet connection port provides quick and trouble-free network communication with your
SPD/transient detection system.
5 RS-485
Two standard RS-485 ports for ModBus RTU connection
6 Form ‘C’ Relay Contacts
Two complete sets of individually configurable form C relay contacts, provides control for a variety of normally open and normally closed contact applications.
6
Expanded Communications
Backside of User Interface Display
Features
Real-Time Power Quality Measurements
Measures and records the magnitude and duration of transient surges (ANSI/IEEE category A, B and C), sags, swells, RMS voltage, crest factor, voltage unbalance, phase loss/outages, dropouts, voltage harmonic distortion and frequency.
Date/Time Stamp and Event Logging
Records and logs device software/firmware updates, alarms, SPD health and magnitude/duration/ history of all measured power quality events. On board memory logs up to 1,000 events, data export feature enables long-term storage and reporting of event history.
SPD Health Status
Health of the SPD is continually monitored and percent protection available for each phase recorded and communicated.
User-Friendly Display
Equipped with an easy to read 128x64 pixel LCD display screen. Capacitive touch navigation buttons provide access to over 25 informational data display screens.
Easy Installation
Integrated directly within the 570, 560, 510, 460 or
440 surge protection devices. The optional remote monitoring panel allows the user display to be mounted in custom locations.
Multiple Alarms Thresholds
Multiple alarm conditions–9 preset triggered alarm conditions with the capability for user-modified threshold. Alarms are configurable as audible, relay, or both providing complete control of event notifications.
Multi-Port Serial and Ethernet Communications
Communicate, view and access data remotely via two RS-485 modbus TCP/RTU serial ports or an ethernet RJ-45 port.
Management Tools
Embedded webpage enables the end user to remotely monitor real time measurements, adjust event thresholds and easily analyze recorded data from several positions throughout a facilities power system, simultaneously from a single location.
System Compatibility
Fully integrates into ASCO 5700 and 5900 family of
PowerQuest products.
Embedded Webpage
Real-Time Monitoring of Voltages,
Event Counts and SPD Health Status
Power Quality Events Measured and Recorded in Detail
Manage Your System with User
Configurable Thresholds and
Power Quality Reporting
For further assistance in choosing the proper surge protective devices for your facility, contact us at:
800-288-6169 ext. 3 (U.S. and Canada Only)
607-721-8840 ext. 3 (Outside U.S.) or
Email: [email protected]
We’re here to help!
Emerson Network Power
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
800 288 6169 Phone (U.S. & Canada Only)
607 721 8840 Phone (Outside U.S.)
607 722 8713 FAX
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
© 2014 Emerson Network Power. All rights reserved throughout the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks of their respective owners.
SL-70109 (R0 1/15) Printed in USA
EmersonNetworkPower.com/Surge
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2014 Emerson Electric Co.
Advanced Transient Detection System
Surge Protection that Monitors, Measures and Manages
A Web-Based Power Quality
Monitor Integrated within the Emerson Network Power
500 and 400 Series Surge
Protective Devices
• Power Quality – Ability to monitor voltage
at every connected panel and track system
anomalies such as transients, surges,
swells and VTHDs.
• Real Time Measurements – Allows over
1000 events/reports to be stored for
future analysis.
• Event Logging – User configurable
alarm thresholds, time/date stamp,
duration and magnitude of events.
• Communications – Information easily
accessed through the Ethernet or MODBUS
TCP/RTU communication systems.
• Embedded Web Page – Convenient
access to present and past data right at
the device.
• System Analysis – Manage power system
with statistical summaries and reporting
software.
advertisement
Related manuals
advertisement