P6000-7000Basics.book Page 1 We dnesday, April 23, 2008 2:25 PM
P-6000/P-7000
Basics
P6000-7000Basics.book Page 2 We dnesday, April 23, 2008 2:25 PM
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for
any use of this information as applied to other equipment.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or expenses
incurred by the purchaser or third parties as a result of accident, misuse, or
abuse of this product or unauthorized modifications, repairs, or alterations to
this product, or (excluding the U.S.) failure to strictly comply with Seiko
Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems
arising from the use of any options or any consumable products other than
those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
Trademarks
Epson and Photo Fine are registered trademarks, Multimedia Storage Viewer
is a trademark, and Epson Exceed Your Vision is a registered logomark of
Seiko Epson Corporation.
Epson Connection is a service mark of Epson America, Inc.
QuickTime and the QuickTime logo are trademarks or registered trademarks
of Apple, Inc., used under license.
CompactFlash is a registered trademark of SanDisk Corporation.
SD is a trademark of SD Card.
General notice: Other product names used herein are for identification
purposes only and may be trademarks of their respective owners. Epson
disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 4/08
2
CPD-25701
P6000-7000Basics.book Page 3 We dnesday, April 23, 2008 2:25 PM
Contents
Introduction
About Your Software and User’s Guide
Getting Started
Unpacking Your P-6000/P-7000
Installing the Battery
Charging the Battery
Turning the Viewer On and Off
Setting the Language, Date, and Time
Installing Your Software and User’s Guide
Using Memory Cards
Inserting and Removing Memory Cards
Copying Files from a Memory Card
Supported File Formats
Viewing Photos and Videos
Viewing Photos
Rating Photos
Creating a Slide Show
Playing Videos
Showing Photos and Videos on a TV
5
6
7
7
8
9
10
11
13
17
17
21
26
27
27
30
31
32
34
3
P6000-7000Basics.book Page 4 We dnesday, April 23, 2008 2:25 PM
Using the Viewer with USB Devices
Connecting a USB Device
Copying Files to the Viewer
Copying Files to a USB Device
Playing Music
Copying Music Files from Your Computer
Playing Audio Files
Managing Your Files
Copying and Moving Files to a Folder
Deleting Files or Folders
Backing Up Files to Your Computer
Solving Problems
Operating Problems
Viewing Problems
Replacing the Battery
Where To Get Help
36
37
38
39
43
43
45
49
49
53
54
56
56
57
58
58
Important Safety Instructions
Responsible Use of Copyrighted Materials
Epson America, Inc. Limited Warranty
60
60
62
65
Index
69
Appendix
4
P6000-7000Basics.book Page 5 We dnesday, April 23, 2008 2:25 PM
Introduction
Your Epson P-6000/P-7000 Multimedia Storage
Viewer™ lets you enjoy photos, videos, and music
wherever you go. Its features include:
◗
Large, high-quality 4-inch LCD with Photo Fine®
Premia technology and true Adobe® RGB
◗
Support for JPEG files and RAW files from select
digital SLR cameras
◗
MP3 and AAC audio with music playlists
◗
MPEG4 and Motion JPEG video
◗
80GB (P-6000) or 160GB (P-7000) hard drive
◗
Two slots for CompactFlash® and SD™ (Secure
Digital) memory cards
◗
Hi-speed USB 2.0 interface to share data with other
USB devices
◗
Epson Link2 software to transfer and manage your
files from a PC or Macintosh® computer
◗
Direct printing to PictBridge™ printers (see the
on-screen User’s Guide for instructions)
◗
Video output to display pictures on a TV or
projector
5
P6000-7000Basics.book Page 6 We dnesday, April 23, 2008 2:25 PM
About Your Software and User’s Guide
The following software is included on your P-6000/
P-7000 Multimedia Storage Viewer:
◗
Epson Link2 software to transfer photos, videos, and
music back and forth between your computer and
viewer
◗
Epson USB Display plug-in to display images from
Adobe Photoshop® applications on the viewer to
maintain color accuracy when editing your images
◗
Epson P-6000/P-7000 User’s Guide for instructions
on all the features of your viewer
◗
Apple® QuickTime® for Windows®
See page 13 to install the software on your computer and
view your User’s Guide.
6
P6000-7000Basics.book Page 7 We dnesday, April 23, 2008 2:25 PM
Getting Started
Follow the instructions in this section to set up your
P-6000/P-7000.
Unpacking Your P-6000/P-7000
Epson P-6000/P-7000
Carrying case
Strap
Lithium-ion battery
Power cord
AC adapter
USB cable
7
P6000-7000Basics.book Page 8 We dnesday, April 23, 2008 2:25 PM
Installing the Battery
1 Open the battery cover.
2 Insert the battery.
3 Close the battery cover.
Battery
release
lever
Note:
If you need to remove the battery, open the battery cover,
and slide the battery release lever to the left.
8
P6000-7000Basics.book Page 9 We dnesday, April 23, 2008 2:25 PM
Charging the Battery
Plug the AC adapter into the viewer. Connect the power
cord to the adapter and plug it into an electrical outlet.
Charge light
The Charge light turns on. It takes about 3.5 hours to
charge the battery when the viewer is not in use.
Caution:
Do not use the viewer without the battery installed. Turn off
the viewer before disconnecting the adapter.
The battery status is displayed in the upper-right corner
of the screen when the viewer is on:
Battery is fully charged.
Battery power is about half full.
Battery power is low.
Battery is charging.
9
P6000-7000Basics.book Page 10 We dnesday, April 23, 2008 2:25 PM
Turning the Viewer On and Off
To turn on the viewer, slide the power switch down and
release it.
Turning Off the Viewer
To turn off the viewer, make sure the memory card
access light is off (see page 18), then slide the power
switch down and hold it until you see the message
Shutting Down.
Note:
If the viewer is in sleep mode, press any button to wake it.
Then turn it off as described above.
If the viewer is idle for 10 minutes, it shuts off automatically
to save battery power. See the on-screen User’s Guide if
you want to change this setting.
10
P6000-7000Basics.book Page 11 We dnesday, April 23, 2008 2:25 PM
Setting the Language, Date, and Time
When you turn on the viewer the first time, you see the
Language setting screen:
1 Press OK to select English. You see a message about
setting the date.
2 Press OK. You see the Date and Time screen:
11
P6000-7000Basics.book Page 12 We dnesday, April 23, 2008 2:25 PM
3 Press right or left on the 4-way
ring to highlight a setting to
change.
4-way
ring
4 Press up or down to change the
setting.
5 When you’re done changing the date and time,
highlight Complete and press OK.
You see the Home screen:
Note:
If you remove the battery, the date and time settings will be
erased after about one day. The next time you turn on the
viewer, the Date and Time screen will be displayed.
If you want to change the settings at any time, select
Settings on the Home screen, then select Date and Time.
12
P6000-7000Basics.book Page 13 We dnesday, April 23, 2008 2:25 PM
Installing Your Software and User’s
Guide
To transfer files between your computer and viewer,
convert video and audio files, and create music playlists,
you need to install the Epson Link2 software. To use the
viewer to display images from Adobe Photoshop
applications to maintain color accuracy when editing
your images, you need to install the USB Monitor
Plug-In. The P-6000/P-7000 User’s Guide installs with
the software and gives detailed instructions on using the
viewer, safety instructions, and other information.
Note:
During the installation process you may need to enter your
administrator name and password.
1 Connect the AC adapter to your viewer (see page 9).
2 Turn on the viewer and your computer.
13
P6000-7000Basics.book Page 14 We dnesday, April 23, 2008 2:25 PM
3 Use the included USB cable to connect the viewer to
your computer.
Larger end
Smaller end
4 Make sure the viewer is on the Home screen, then
press the
button to connect to your computer.
The viewer LCD screen turns off and your computer
recognizes the viewer as a removable drive.
5 Open the P-6000 or P-7000 drive on your
computer:
14
◗
Windows: Click
or Start, click Computer
or My Computer, then double-click the P-6000
or P-7000 icon.
◗
Macintosh: Double-click the P-6000 or P-7000
icon on the Desktop.
P6000-7000Basics.book Page 15 We dnesday, April 23, 2008 2:25 PM
6 Double-click the installation software located in the
root of the drive:
◗
Windows: P_6000_WIN_SOFTWARE or
P_7000_WIN_SOFTWARE
In Windows Vista®, if you see the User Account
Control screen during installation, click Allow.
◗
Macintosh: P_6000_MAC_SOFTWARE.DMG
or P_7000_MAC_SOFTWARE.DMG
Double-click the Mac OS X icon to continue
the installation.
7 Follow the instructions on your computer screen to
install the Epson Link2 software, USB Display
Plug-In, Apple QuickTime (Windows only), and the
P-6000/P-7000 on-screen User’s Guide.
Note:
To install USB Display Plug-In, at least one of the
following applications must be installed: Photoshop CS
(Windows only), Photoshop CS2, Photoshop CS3,
Photoshop Elements 4.0, Photoshop Elements 5.0
(Windows only), Photoshop Elements 6.0 (Windows
only).
8 When installation is complete, click Exit.
9 Restart your computer to use the installed software.
15
P6000-7000Basics.book Page 16 We dnesday, April 23, 2008 2:25 PM
Note:
To view the User’s Guide, double-click its icon on your
desktop. You need to have Adobe Reader® or Acrobat®
installed on your system to view the guide. You can
download Adobe Reader at www.adobe.com.
Do not remove the software from the viewer after installing
it on your computer, in case you need to reinstall it.
16
P6000-7000Basics.book Page 17 We dnesday, April 23, 2008 2:25 PM
Using Memory Cards
Follow the instructions in this section to insert a memory
card and copy files to your P-6000/P-7000.
Inserting and Removing Memory
Cards
The P-6000/P-7000 supports the following types of
memory cards:
◗
CompactFlash (CF) memory card (Type2) and
MicroDrive™ (3.3V)
◗
SD (Secure Digital) and SD HC™ (High Capacity)
memory cards
◗
MultiMediaCard™ and MMCplus™
With a commercially available CompactFlash adapter,
you can use many other types of memory cards in the
CF Card slot, such as miniSD™, RS-MMC, Memory
Stick® Duo, Memory Stick PRO Duo™, and xD-Picture
Card™.
17
P6000-7000Basics.book Page 18 We dnesday, April 23, 2008 2:25 PM
Caution:
Never remove a memory card while the memory card access
light is flashing, or files may be lost or damaged. Make sure
you insert memory cards in the correct orientation, or the card
and viewer may be damaged.
Do not put labels or stickers on memory cards. The sticker
may peel off, preventing the card from being ejected and
damaging the viewer.
Using the CF Card Slot
Insert the memory card into the slot with the label facing
forward. Then push the memory card all the way into
the slot.
Memory card
access light
If you are using a CompactFlash adapter, put the card
into the adapter and insert the adapter into the slot.
18
P6000-7000Basics.book Page 19 We dnesday, April 23, 2008 2:25 PM
To remove a card from the CF Card slot, first make sure
the memory card access light is off. Then press the eject
button and pull out the card.
If the button is not sticking out, press it once to pop it
out, then press it again to eject the card.
Note:
If you are using a CompactFlash adapter, remove the
adapter from the viewer; do not remove only the memory
card.
19
P6000-7000Basics.book Page 20 We dnesday, April 23, 2008 2:25 PM
Using the SD Card Slot
Insert an SD, SD HC, MultiMediaCard, or MMCplus
card into the slot as shown below. Insert it fully into the
viewer.
Memory card
access light
To remove a card from the SD Card slot, first make sure
the memory card access light is off. Then press in on the
top of the card. When the card pops out, pull it out of
the slot.
20
P6000-7000Basics.book Page 21 We dnesday, April 23, 2008 2:25 PM
Copying Files from a Memory Card
After you insert a memory card (as described on page 18
or 20), you can copy all of the files on the card to Backup
Files or copy selected files to the My Photos or My
Videos folder on the viewer.
Copying All files
1 If the Memory Card menu doesn’t open
automatically, use the 4-way ring or jog dial to
highlight Memory Card on the Home screen, then
press OK. You see this menu:
2 Select CF Memory Card Backup or SD Memory
Card Backup, then press OK.
The files are copied to a folder that is automatically
created in the Backup Files folder on the viewer.
21
P6000-7000Basics.book Page 22 We dnesday, April 23, 2008 2:25 PM
Note:
The folder is named according to the date, for example,
03292008M.001. You can change the date format by
selecting Settings > Date and Time on the Home
screen (see page 11). Folders are numbered in the order
they are copied.
When the backup is complete, you see thumbnail
images of the copied photos.
Copying Selected Files
1 If the Memory Card menu doesn’t open
automatically, use the 4-way ring or jog dial to
highlight Memory Card on the Home screen, then
press OK. You see this menu:
22
P6000-7000Basics.book Page 23 We dnesday, April 23, 2008 2:25 PM
2 Select Browse CF Memory Card or Browse SD
Memory Card, then press OK. You see your photos
displayed.
3 Press the Menu button to display the pop-up menu.
4 Select Copy/Move, then press OK.
5 Select Select and Copy Files, then press OK. Your
photos are displayed with white checkboxes:
checkbox
23
P6000-7000Basics.book Page 24 We dnesday, April 23, 2008 2:25 PM
6 Use the 4-way ring or jog dial to highlight each
photo you want to copy and press to select it. The
selected items are displayed with red check marks.
Tip:
To select all files and folders, press Menu and choose
Select All.
7 When you are finished selecting photos, press OK.
8 Use the 4-way ring to select My Photos or My
Videos, then press right on the 4-way ring.
9 Do one of the following:
◗
◗
To copy the items to the selected folder, press
OK. Your items are copied.
To copy the items into a new folder,
highlight Create New Folder and press OK.
The on-screen keyboard appears with the
current date entered as the default name for the
folder.
Use the Back (backspace) button to clear the
current name. Then enter a new name using the
4-way ring or jog dial (highlight each character
and press OK to enter it). To keep the current
name, highlight Done and press OK.
10 Your files are copied to the folder you selected.
24
P6000-7000Basics.book Page 25 We dnesday, April 23, 2008 2:25 PM
Deleting Files After Copying
You can have files automatically deleted after you copy
them to the viewer.
1 On the Home screen, use the 4-way ring or jog dial
to select Settings and press OK.
2 Select Backup Settings and press OK.
3 Select Process After Backup and press OK.
4 Choose one of the following settings:
◗
Verify backed up data if you want the viewer
to verify that the files were copied successfully.
◗
Verify & del. orig. data if you want files on
◗
Confirm if you want the viewer to ask whether
◗
memory cards to be automatically deleted,
without a warning message, after successfully
copying the files.
to delete the files from the memory card after
copying.
No Action if you want to copy files without
doing anything after the files are copied.
5 When you are finished, press OK. Press Back to
return to the previous screen.
25
P6000-7000Basics.book Page 26 We dnesday, April 23, 2008 2:25 PM
Supported File Formats
The P-6000/P-7000 supports these image formats:
Image files
Extension
Details
JPEG
.jpg
.jpeg
Minimum size: 320 × 240 pixels
Maximum size: 31 megapixels
Maximum image aspect ratio: 3:1
Non-progressive JPEG files only
RAW
.arw
.cr2
.crw
.dng
.erf
.mrw
.nef
.orf
.pef
.raf
JPEG data stored in the header of
RAW files is displayed.
The P-6000/P-7000 supports .avi, .mov, .mp4, and .m4v
format video files.
For more details about the supported file formats,
see the on-screen User’s Guide. You can also check
epson.com/support for the latest information on
supported RAW camera files.
26
P6000-7000Basics.book Page 27 We dnesday, April 23, 2008 2:25 PM
Viewing Photos and Videos
Follow the instructions in this section to view photos,
create slide shows, and play videos on your P-6000/
P-7000.
To share your images, slide shows, and videos with a
larger audience, you can connect the viewer to a TV or
projector (see page 34).
Viewing Photos
You can display images at full-screen, zoom in, or show
several types of photographic information. You can also
rate photos and display them according to their rating
(see page 30).
1 Use the 4-way ring or jog dial to select the folder
containing your photos, then press OK.
Note:
If you’ve backed up photos from a memory card or USB
device, they’re automatically stored in Backup Files.
27
P6000-7000Basics.book Page 28 We dnesday, April 23, 2008 2:25 PM
You see a screen like this:
2 Select the image you want to view, then press OK.
The selected image is enlarged to fill the screen.
Zooming an Image
When viewing an image at full-screen, you can zoom in
or pan around to see details.
◗
To zoom in, press the + (plus) button. Keep pressing
it to zoom in up to 400%.
◗
To zoom out, press the – (minus) button. Continue
pressing it to zoom all the way out.
◗
To move around a zoomed image, use the 4-way
ring.
28
P6000-7000Basics.book Page 29 We dnesday, April 23, 2008 2:25 PM
Changing How Files Are Displayed
You can change your view of the files by pressing the
Display button while in a folder:
Thumbnails (12 per screen)
Mini-thumbnails (64 per screen)
Details (file name, backup/copy date, files size)
29
P6000-7000Basics.book Page 30 We dnesday, April 23, 2008 2:25 PM
Displaying Image Information
To view information about an image shown at fullscreen, press the Display button. Press Display again to
view additional information and a histogram like the
following:
Press Display a third time to view the over- or underexposure preview, which highlights areas at both ends of
the brightness range. See the on-screen User’s Guide for
more information.
Rating Photos
You can use the button to rate your photos from 1 to
5, and then view just the photos you’ve rated.
1 Highlight a photo you want to rate.
2 Press the
button up to 5 times to change the
rating, or press it again to clear the setting.
30
P6000-7000Basics.book Page 31 We dnesday, April 23, 2008 2:25 PM
3 To view rated photos, select Backup Files or
My Photos on the Home screen and press OK.
4 Press Menu, select Rating Filter Display, and
press OK.
5 Select the rating level you want to view, and press
OK. The rated photos appear on the screen.
Use the Epson Link2 software to move images and their
ratings to your computer for use with certain
applications (see your on-screen User’s Guide for details).
Creating a Slide Show
You can display images in a folder as a slide show and
add custom transitions and your own background music.
1 Select the folder you want to display as a slide show.
2 Press the Menu button. You see this screen:
31
P6000-7000Basics.book Page 32 We dnesday, April 23, 2008 2:25 PM
3 Select Slide Show and press OK. The slide show
starts. To stop the slide show, press the Back button.
Slide Show Settings
You can select transition effects, timing, and background
music for the slide show. To change the settings, select
Settings on the Home screen, press OK, then select
Slide Show.
◗
Effects: Choose one of four slide transition effects,
Enhanced Photo Display, or None.
◗
Duration: Choose the time between slide
◗
Slide Show Music: Choose background music for
◗
Clock: Choose whether to display the current time
transitions. You can select from 1 to 30 seconds.
the slide show. You can select None, one of three
presets, or a music playlist you’ve created.
in the corner of the screen.
Playing Videos
1 Use the 4-way ring or jog dial to select the folder
that contains your videos, then press OK.
Note:
If you’ve copied videos from a memory card or USB
device, they’re automatically stored in Backup Files.
32
P6000-7000Basics.book Page 33 We dnesday, April 23, 2008 2:25 PM
2 Highlight the video file you want to play, then press
OK. The video starts playing.
Note:
To set the video screen size, press Menu and select
Play at Full Screen or Play at Original Size from Play
Settings in the pop-up menu. Setting Play at Full
Screen displays the image by adjusting the longest side
to the LCD display without changing the aspect ratio.
3 You can do the following while watching a video:
◗
To pause or resume playing the video, press OK.
◗
To adjust the volume, use the jog dial or press
the + (plus) or – (minus) buttons.
◗
To rewind or fast-forward, press left or right on
the 4-way ring. Press repeatedly to increase the
speed. (This function may not work with some
videos.)
◗
To stop the video and return to the previous
screen, press Back.
33
P6000-7000Basics.book Page 34 We dnesday, April 23, 2008 2:25 PM
The viewer remembers where you stopped.
When you resume, playback starts 3 seconds
before the stop point (for videos longer than
1 minute). If you want to restart playback from
the beginning, press Menu, select Play
Settings from the pop-up menu, and select
Play from Beginning.
◗
To view information about the video, press
Display. You see a progress bar on the video.
Press Display again to view information
including frame rate, bit rate, and video and
audio codecs:
Showing Photos and Videos on a TV
You can connect the P-6000/P-7000 to a TV or
projector and view your images, videos, and slide shows.
You will need a camcorder AV cable (3.5-mm to
3 RCA), available at many electronics stores.
34
P6000-7000Basics.book Page 35 We dnesday, April 23, 2008 2:25 PM
1 Connect the cable’s three RCA plugs to the video
and audio IN jacks on your TV or projector.
2 Connect the cable’s mini-plug to the A/V Out jack
on the side of the viewer.
The viewer’s LCD screen turns off.
3 Set the TV or projector to display video input from
the viewer.
Now you can use all of the viewer’s controls to show
photos, videos, and slide shows on your TV or projector.
Note:
Some TVs may crop your images at the top and bottom, or
you may notice some flickering, for example, near the edges
of the screen. This is a normal result of your viewer’s high
image resolution.
35
P6000-7000Basics.book Page 36 We dnesday, April 23, 2008 2:25 PM
Using the Viewer with USB
Devices
You can connect a flash memory drive or other USB
device to your P-6000/P-7000 and copy files to or from
the device.
The viewer supports devices that are compatible with the
USB Mass Storage specification, including:
◗
Digital cameras
◗
Flash memory drives
◗
Memory card readers
◗
External hard drives
◗
Epson Multimedia Storage Viewers
Note:
USB hubs are not supported, and some USB devices may
not work without a power connection. Epson cannot
guarantee the compatibility of any device.
36
P6000-7000Basics.book Page 37 We dnesday, April 23, 2008 2:25 PM
Connecting a USB Device
Before you connect a USB device, connect the AC
adapter to the viewer and plug it in. If your USB device
has an AC adapter, use it to prevent the possible loss of
files during transfer.
1 Open the connector cover on the side of the viewer.
2 Plug the device into the Host USB connector on the
side of the viewer.
If the device has a USB cable, connect one end of the
cable to the device and the other end to the Host
USB connector on the viewer.
Note:
To prevent a possible malfunction, do not use both USB
connectors on the viewer at the same time.
3 Turn on the viewer and the USB device if necessary.
37
P6000-7000Basics.book Page 38 We dnesday, April 23, 2008 2:25 PM
Copying Files to the Viewer
After you connect a USB device, you can copy all the
files to the viewer, or select individual files to copy.
1 On the Home screen, use the 4-way ring or jog dial
to highlight USB Device, then press OK.
2 Select Connect to USB Device, then press OK.
You see the USB Device menu:
3 Do one of the following:
◗
38
If you connected a device that contains a DCIM
folder, such as a digital camera, you can copy all
of the files on the device to the viewer. Select
Backup USB device to Viewer, then press
OK. The files are copied to a folder that is
automatically created in the Backup Files folder
on the viewer.
P6000-7000Basics.book Page 39 We dnesday, April 23, 2008 2:25 PM
The folder is named according to the date, for
example, 03292008M.001. You can change the
date format by selecting Settings > Date and
Time on the Home screen (see page 11).
Folders are numbered in the order they are
copied.
◗
If you connected a device that does not contain
a DCIM folder in the root folder of the device,
or to copy selected files, select Browse USB
Device in the USB Device menu, then press
OK. You see your photos displayed. Then follow
steps 3 through 8 on page 23.
4 Wait until all the files are copied, then disconnect
the USB device.
Copying Files to a USB Device
After you connect a USB device, you can copy all the
files or selected files from the viewer to the USB device.
If your USB device has an AC adapter, connect the
adapter and plug it in before starting.
39
P6000-7000Basics.book Page 40 We dnesday, April 23, 2008 2:25 PM
Backing Up All Files to a USB Device
This process may take some time, depending on the
volume of data in the viewer.
1 Follow the instructions on page 37 to connect the
USB device.
2 On the Home screen, use the 4-way ring or jog dial
to highlight USB Device, then press OK.
3 In the USB Device menu, select Connect to USB
Device, then press OK.
4 Select Copy all Backup Files, then press OK.
5 Wait until all the files are copied, then disconnect
the USB device.
40
P6000-7000Basics.book Page 41 We dnesday, April 23, 2008 2:25 PM
Copying Selected Files to a USB Device
You can select individual files or folders to copy.
1 Follow the instructions on page 37 to connect the
USB device.
2 Highlight the file or folder you want to copy.
3 Press the Menu button.
4 Select Copy/Move, then press OK.
5 Select Select and Copy Files, then press OK. Your
photos are displayed with white checkboxes:
checkbox
41
P6000-7000Basics.book Page 42 We dnesday, April 23, 2008 2:25 PM
6 Use the 4-way ring or jog dial to highlight each
photo you want to copy, then press to select it.
The selected items are displayed with red check
marks.
Tip:
To select all files and folders, press Menu and choose
Select All.
7 When you are finished selecting photos, press OK.
8 Select USB Device, then press right on the 4-way
ring to select it.
9 Do one of the following:
◗
◗
Use the 4-way ring to select a folder, then press
OK.
To copy the items into a new folder, highlight
Create New Folder and press OK. The
on-screen keyboard appears with the current
date entered as the default name for the folder.
Use the Back (backspace) button to clear the
current name. Then enter a new name using the
4-way ring or jog dial (highlight each character
and press OK to enter it). To keep the current
name, highlight Done and press OK.
Your files are copied. When copying is complete,
disconnect the USB device.
42
P6000-7000Basics.book Page 43 We dnesday, April 23, 2008 2:25 PM
Playing Music
You can copy audio files from your computer and play
them on the P-6000/P-7000. You can create playlists
using your computer and the Epson Link2 software, or
using the viewer itself. See your on-screen User’s Guide
for instructions on creating a playlist and adjusting audio
equalizer settings.
Copying Music Files from Your
Computer
The viewer can store up to 10,000 audio files. It supports
MP3 and M4A/AAC format audio files without
copyright protection and with a maximum file size of
200MB.
Other audio file formats, such as .WAV, are
automatically converted by the Epson Link2 software.
See your on-screen User’s Guide for more information
about audio file formats.
Make sure you have installed the Epson Link2 software,
as described on page 13. Then follow the instructions
below to transfer your files.
1 Connect the AC adapter to your viewer (see page 9).
2 Turn on the viewer and your computer.
43
P6000-7000Basics.book Page 44 We dnesday, April 23, 2008 2:25 PM
3 Use the included USB cable to connect the viewer to
your computer.
Larger end
Smaller end
4 Make sure the viewer is on the Home screen, then
press the
button to connect to your computer.
The LCD screen turns off.
5 Double-click the
Epson Link2 icon on your
desktop to open the program.
6 Click My Music, then locate the audio files you
want to copy from your computer.
Caution:
The viewer will rename the audio files to make them
playable. Always keep backup copies of your songs, and
never transfer your only copies to the viewer.
7 Click the down arrow in the center of the screen to
transfer the files to your viewer.
44
P6000-7000Basics.book Page 45 We dnesday, April 23, 2008 2:25 PM
8 When the transfer is complete, disconnect the viewer
from your computer:
◗
Windows: Right-click the
or
icon in the
lower right corner of your screen and select
Safely Remove Hardware or Unplug or
Eject Hardware. Then remove the USB cable.
◗
Macintosh: Drag and drop the viewer icon to
the trash, then remove the USB cable.
9 If you see a message on the viewer asking you to
update the music list, click OK.
Note:
Only audio files transferred from a computer can be
displayed in My Music. If you want to play a music file
copied from a memory card, select it in Backup Files, then
press OK to play it.
Playing Audio Files
You can connect headphones to the
jack on top of
the viewer, or listen through the viewer’s built-in
speaker.
45
P6000-7000Basics.book Page 46 We dnesday, April 23, 2008 2:25 PM
1 Select My Music on the Home screen using the
4-way ring or jog dial, then press OK.
2 Select Music List, then press OK. If you don’t see
the songs you transferred to the viewer, select
Update Music List and press OK.
Note:
To continue playing from a previously played track,
select Resume, then press OK.
3 Select a category to start playback, then press right
on the 4-way ring.
You can narrow your search by selecting one of the
categories and navigating to its subcategories using
the 4-way ring. Select All at the top of the list to
include all items in the list.
46
◗
Artist - Artist name - Album name - Track name
◗
Album - Album name - Track name
P6000-7000Basics.book Page 47 We dnesday, April 23, 2008 2:25 PM
◗
Genre - Genre name - Artist name - Album
name - Track name
◗
All - Track name
◗
Playlist - Playlist name - Track name
◗
Update Music List (to update audio files after
transferring them from your computer)
4 Select the track you want using the 4-way ring, then
press OK.
Controlling Audio Playback
You can do the following while listening to music or
audio files:
◗
To play or pause music, press OK.
◗
To adjust the volume, use the jog dial or press the +
(plus) or – (minus) buttons.
47
P6000-7000Basics.book Page 48 We dnesday, April 23, 2008 2:25 PM
◗
To skip back or forward, press left or right on the
4-way ring. Press and hold to rewind or fast-forward.
◗
To return to the previous screen (without stopping
the audio), press Back. (If you return to the main
My Music screen, audio playback stops.)
◗
To display information about the audio file such as
code, bit rate, and sampling rate, press Display.
Setting Repeat and Shuffle Options
In My Music, press the Menu button and select Play
Mode. Then set the following items using the 4-way
ring or jog dial, then press OK.
First select either Shuffle or Normal Play Order to set
the playback order, then select the desired repeat
play mode.
To play...
Select...
Current category once
No Repeat
Current track repeatedly
Repeat One Song
Current category repeatedly
Repeat All
Current category in random order
Shuffle
Current category in normal order
repeatedly
Normal Play Order
48
P6000-7000Basics.book Page 49 We dnesday, April 23, 2008 2:25 PM
Managing Your Files
You can copy the files you’ve backed up from memory
cards or USB drives to your own folders for special
purposes, such as portfolios. You can also back up files
from the viewer to your computer.
Copying and Moving Files to a Folder
1 Open a folder to a thumbnail view, as shown below,
and highlight the file or folder you want to copy or
move.
Highlight a file
2 Press the Menu button, then select Copy/Move.
49
P6000-7000Basics.book Page 50 We dnesday, April 23, 2008 2:25 PM
3 Do one of the following:
◗
To copy files to another folder, select Select
and Copy Files, then press OK.
◗
To move files to another folder, select Select
and Move Files, then press OK.
Note:
To copy or move a single file, select Copy this File or
Move this File, then continue with step 5.
4 Use the 4-way ring or jog dial to highlight each
additional item you want to copy or move, then
press to select it. The selected items are displayed
with red check marks.
Tip:
To select all files and folders, press Menu and choose
Select All.
5 Press OK.
50
P6000-7000Basics.book Page 51 We dnesday, April 23, 2008 2:25 PM
6 Use the 4-way ring to select a folder to copy or move
the items to. Then do one of the following:
◗
To copy or move the items into the selected
folder, press OK. Your items are copied or
moved.
◗
To copy or move the items into a new subfolder
within the selected folder, highlight Create
New Folder and press OK. Then see the next
section to enter a name for the new folder and
copy or move the items.
Tip:
It’s easier to manage your files if you copy or move
them into a folder you’ve named, instead of placing
them in the root of a main folder (such as My Photos or
My Videos).
51
P6000-7000Basics.book Page 52 We dnesday, April 23, 2008 2:25 PM
Creating a New Folder
1 To copy items to a new folder, follow steps 1
through 6 in the previous section.
When you select Create New Folder and press OK,
the on-screen keyboard appears with the current
date entered as the default name for the folder.
You can either keep the name or enter a new one.
2 To keep the current name, use the 4-way ring or jog
dial to highlight Done and press OK. Your files are
copied to the new folder.
3 To enter a new name, use the Back (backspace)
button to clear the current name. Then enter a new
name using the 4-way ring or jog dial (highlight each
character and press OK to enter it).
4 After entering the name, highlight Done and press
OK. Your files are copied.
52
P6000-7000Basics.book Page 53 We dnesday, April 23, 2008 2:25 PM
Note:
You can rename a folder by highlighting it, pressing the
Menu button, and selecting Edit > Rename. Folders in
Backup Files can’t be renamed.
Deleting Files or Folders
1 Highlight the file or folder you want to delete.
2 Press the Menu button, then select Delete.
3 If you’re viewing files on the thumbnail screen, use
the 4-way ring or jog dial to highlight each
additional item you want to delete and press to
select it. The selected items are displayed with red
check marks. Press OK to finish the selection.
Tip:
To select all files and folders, press Menu and choose
Select All. To select more than one file or folder, you
must be viewing them on the thumbnail, minithumbnail, or detailed list screen (see page 29).
4 At the confirmation screen, select Yes and press OK.
Your files are deleted.
Note:
You can lock files and folders to prevent them from being
accidentally deleted. See the on-screen User’s Guide for
details.
53
P6000-7000Basics.book Page 54 We dnesday, April 23, 2008 2:25 PM
Backing Up Files to Your Computer
You can automatically copy all the files from the viewer’s
Backup Files folder to your computer.
1 Connect the AC adapter to your viewer (see page 9).
2 Turn on the viewer and your computer.
3 Use the included USB cable to connect the viewer to
your computer.
Larger end
Smaller end
4 Make sure the viewer is on the Home screen, then
press the
button to connect to your computer.
The viewer LCD screen turns off.
54
P6000-7000Basics.book Page 55 We dnesday, April 23, 2008 2:25 PM
Note:
Although your computer may recognize the viewer as a
removable drive, it is best to transfer files using the
Epson Link2 software.
5 Double-click the
Epson Link2 icon on your
desktop to open the program.
6 If you see a message that Epson Link2 has found files
in your viewer’s Backup Files folder, click Yes to
copy the files.
Note:
Only files that haven’t already been copied will be
transferred.
7 When the transfer is complete, disconnect the viewer
from your computer:
◗
Windows: Right click the
or
icon in the
lower right corner of your screen and select
Safely Remove Hardware or Unplug or
Eject Hardware. Then remove the USB cable.
◗
Macintosh: Drag and drop the viewer icon to
the trash, then remove the USB cable.
For more information on using Epson Link2 to move
files, click the ? in the upper-right corner of the software
to view the on-screen Epson Link2 User’s Guide.
55
P6000-7000Basics.book Page 56 We dnesday, April 23, 2008 2:25 PM
Solving Problems
Check this list of common problems and possible
solutions. For more troubleshooting tips, check the
P-6000/P-7000 User’s Guide on your computer. (See
page 13 for instructions on installing and viewing the
guide.)
Operating Problems
The power doesn’t turn on.
◗
The battery may need recharging. Connect the AC
adapter as shown on page 9.
◗
The battery may need to be replaced. See page 58.
You can’t copy files to or from the viewer.
◗
Make sure you have sufficient space on the viewer’s
hard drive. To check the available space, select
Settings on the Home screen, select Device
Information then select Hard Drive Capacity.
◗
If you’re using an external USB device with the
viewer, connect the AC adapter to the viewer.
The buttons on the viewer don’t work.
◗
56
Make sure the power switch isn’t in the Hold
position.
P6000-7000Basics.book Page 57 We dnesday, April 23, 2008 2:25 PM
◗
The viewer may need to be reset. Use the end of a
paper clip to gently press the Reset button next to
the viewer’s USB ports.
Viewing Problems
The LCD screen is dark.
◗
The screen may have turned off automatically to
save power, or the viewer may have shut down. Press
any button to turn the screen back on, or press down
on the power switch to turn the viewer on.
◗
If you’ve connected the viewer to your TV or
computer, the LCD screen turns off. Make sure a
video cable is not connected to the viewer.
◗
Try adjusting the screen brightness. Select Settings
on the Home screen, then select LCD Settings, and
select LCD Brightness.
Images or videos are not displayed correctly, or sound
doesn’t play correctly.
◗
If an image doesn’t appear or appears as ?, it may
not be in a supported file format. See page 26 for
supported formats.
For audio and video, make sure the bit rate and
audio codec of your file are supported. See the
on-screen User’s Guide for details.
57
P6000-7000Basics.book Page 58 We dnesday, April 23, 2008 2:25 PM
Replacing the Battery
You can purchase a replacement lithium-ion battery
(B32B818262) from an Epson authorized reseller.
To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at
www.epsonstore.com (U.S. sales) or www.epson.ca
(Canadian sales).
Where To Get Help
Epson provides these technical support services:
Internet Support
Visit Epson’s support website at epson.com/support and
select your product for solutions to common problems.
You can download software and documentation, get
FAQs and troubleshooting advice, or e-mail Epson with
your questions.
58
P6000-7000Basics.book Page 59 We dnesday, April 23, 2008 2:25 PM
Speak to a Support Representative
Before you call Epson for support, please have the
following information ready:
◗
Product name (Epson P-6000 or P-7000)
◗
Product serial number (located on the bottom of the
viewer)
◗
Proof of purchase (such as a store receipt) and date
of purchase
◗
Computer configuration
◗
Description of the problem
Then call:
◗
U.S.: (562) 276-4303, 6 AM to 6 PM, Pacific Time,
Monday through Friday.
◗
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific
Time, Monday through Friday.
Toll or long distance charges may apply.
59
P6000-7000Basics.book Page 60 We dnesday, April 23, 2008 2:25 PM
Appendix
Important Safety Instructions
Additional safety information for the P-6000/P-7000 can be found in
the on-screen User’s Guide. See page 13 for instructions on installing
and viewing the guide.
Battery Safety Instructions
Warning:
There is a risk of explosion if the battery is replaced by the incorrect type. Use
a new battery of the specified type only. Dispose of used batteries according
to the instructions.
◗ If battery acid gets into your eyes or on your skin, immediately
◗
◗
◗
◗
◗
◗
◗
◗
◗
◗
rinse the affected area thoroughly with water and seek medical
treatment. If a battery is swallowed, seek medical treatment
immediately.
Use only an Epson lithium-ion battery for the P-6000/P-7000
according to the instructions in this manual.
Use only AC adapter model A351H and the P-6000/P-7000
(model G971A/G971B) to charge batteries.
Do not use the battery that comes with this product for other
devices.
To protect against short-circuiting, do not remove the outside
sleeves of the battery.
Do not handle the battery with wet hands or use it near water.
Do not expose the battery to water or high humidity.
Do not drop, puncture, disassemble, mutilate, or short-circuit the
battery.
Do not place the battery near or into fire or water.
Do not use batteries that are leaking or damaged in any way.
Do not charge the battery on devices except this product.
60
P6000-7000Basics.book Page 61 We dnesday, April 23, 2008 2:25 PM
◗ Do not charge the battery near open flame or in very hot
locations.
◗ Keep batteries away from heat sources.
◗ Do not leave the battery in a vehicle to prevent the battery from
overheating.
◗ Do not insert objects into any openings as they may touch
dangerous voltage points or short-circuit components.
◗ Prevent the battery from coming into contact with metal objects
that could short-circuit it, such as coins or keys.
◗ Do not insert the battery into power outlets or other power
sources such as car cigarette lighter sockets.
◗ Do not solder wires or terminals directly to the battery.
◗ Do not touch battery terminals.
◗ Keep batteries away from open flame if they leak or smell strange.
◗ If overheating, discoloration, or distortion occur, remove the
battery from this product and do not use it.
◗ Charge the battery before using it if it has not been used for a long
period.
◗ Do not connect the AC adapter when the battery is not installed.
Otherwise, the P-6000/P-7000 may be damaged.
◗ Remove the battery and unplug this product and refer servicing to
qualified service personnel under the following conditions: The
power cord or plug is damaged; liquid has entered this product or
its options; this product or its options have been dropped or the
case is damaged; this product or its options do not operate
normally or exhibit a distinct change in performance.
Storing the Battery
◗ When not using this device for a long period, remove the battery
from this product and store it separately.
◗ Do not store batteries where the temperature or humidity is very
high.
◗ Store batteries out of children’s reach.
61
P6000-7000Basics.book Page 62 We dnesday, April 23, 2008 2:25 PM
Disposing of the Battery
Before disposing of the battery, make sure you discharge it
completely.
For users in North America: This mark indicates that the
battery will be recycled by the RBRC. When you are ready
to dispose of the battery, contact the RBRC at
(800) 822-8837.
Warning:
Be sure to securely cover the end of the battery with tape to prevent
combustion or explosion when disposing of it.
Do not incinerate or dispose of the battery in fire.
Do not dispose of batteries as ordinary refuse. Instead, dispose of them in a
collection or recycle box in accordance with local laws.
WARNING:
The cords included with this product contain chemicals, including lead, known
to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling. (provided in accordance with Proposition 65 in
Cal. Health & Safety Code § 25249.5 and following)
Responsible Use of Copyrighted
Materials
Epson encourages each user to be responsible and respectful of the
copyright laws when using any Epson product. While some countries’
laws permit limited copying or reuse of copyrighted material in
certain circumstances, those circumstances may not be as broad as
some people assume. Contact your legal advisor for any questions
regarding copyright law.
62
P6000-7000Basics.book Page 63 We dnesday, April 23, 2008 2:25 PM
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio and television reception. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
◗ Reorient or relocate the receiving antenna
◗ Increase the separation between the equipment and receiver
◗ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
◗ Consult an experienced radio/TV technician for help.
WARNING: The connection of a non-shielded equipment interface
cable to this equipment will invalidate the FCC Certification of this
device and may cause interference levels that exceed the limits
established by the FCC for this equipment. It is the responsibility of
the user to obtain and use a shielded equipment interface cable with
this device. If this equipment has more than one interface connector,
do not leave cables connected to unused interfaces. Changes or
modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
63
P6000-7000Basics.book Page 64 We dnesday, April 23, 2008 2:25 PM
For Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
Declaration of Conformity
According to 47CFR, Part 2 and 15 for Class B Personal Computers
and Peripherals; and/or CPU Boards and Power Supplies used with
Class B Personal Computers:
We:
Epson America, Inc.
Located at:
MS 3-13
3840 Kilroy Airport Way
Long Beach, CA 90806
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B
digital device. Each product marketed is identical to the
representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment
being produced can be expected to be within the variation accepted,
due to quantity production and testing on a statistical basis as
required by 47CFR §2.909. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Trade Name:
Epson
Type of Product:
Multimedia Storage Viewer
Model:
G971A (P-6000) or G971B (P-7000)
Product:
Epson P-6000/P-7000
64
P6000-7000Basics.book Page 65 We dnesday, April 23, 2008 2:25 PM
Epson America, Inc. Limited Warranty
What Is Covered: Epson America, Inc. (“Epson”) warrants to the
first retail purchaser that the Epson product enclosed with this
limited warranty statement, if purchased and used in the United
States or Canada, will be free from defects in workmanship and
materials for a period of one (1) year from the date of original
purchase. For warranty service, you must provide proof of the date of
original purchase.
What Epson Will Do To Correct Problems: If your Epson product
requires service during the limited warranty period, please call the
Epson ConnectionSM at (562) 276-4365 in the United States or
(905) 708-3839 in Canada for warranty instructions and return
authorization. An Epson service technician will provide telephone
diagnostic service to determine whether the product requires service.
If service is needed, Epson will, at its option, repair or exchange the
product without charge for parts or labor. If the product requires
repair or replacement, it is your responsibility to package it in its
original container or an equivalent, along with proof of the date of
original purchase and ship it to Epson. Packaging and shipping costs
incurred in presenting your Epson product for warranty service are
your responsibility. Return shipping costs from the Epson repair
facility are Epson’s responsibility. When warranty service involves the
exchange of the product or of a part, the item replaced becomes
Epson property. The replacement product or part may be new or
refurbished to the Epson standard of quality, and, at Epson’s option,
may be another model of like kind and quality. Epson’s liability for
replacement of the covered product will not exceed the original retail
selling price of the covered product. Exchange products and parts
assume the remaining warranty period of your original product
covered by this limited warranty.
65
P6000-7000Basics.book Page 66 We dnesday, April 23, 2008 2:25 PM
What This Warranty Does Not Cover: This warranty covers only
normal use in the United States and Canada. This warranty is not
transferable. This warranty does not cover damage to the Epson
product caused by parts or supplies not manufactured, distributed or
certified by Epson. This warranty does not cover third party parts,
components or peripheral devices added to the Epson product after
its shipment from Epson. This warranty does not cover loss or
recovery of any data or software stored on the product. Epson is not
responsible for warranty service should the Epson label or logo or the
rating label or serial number be removed or should the product fail to
be properly maintained or fail to function properly as a result of
misuse, abuse, improper installation, neglect, improper shipping,
damage caused by disasters such as fire, flood, and lightning,
improper electrical current, software problems, interaction with nonEpson products, or service other than by an Epson Authorized
Servicer. If a claimed defect cannot be identified or reproduced, you
will be held responsible for costs incurred.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR
IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR
PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION
OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN
ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED
TO THE WARRANTY PERIOD IDENTIFIED ABOVE.
UNLESS STATED HEREIN, ANY STATEMENT OR
REPRESENTATIONS MADE BY ANY OTHER PERSON OR
FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS
WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC.,
NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS,
INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT,
66
P6000-7000Basics.book Page 67 We dnesday, April 23, 2008 2:25 PM
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
RESULTING FROM THE USE OR INABILITY TO USE THE
EPSON PRODUCT, OR FOR LOST DATA OR LOST
SOFTWARE WHETHER RESULTING FROM BREACH OF
WARRANTY OR ANY OTHER LEGAL THEORY.
In Canada, warranties include both warranties and conditions.
Some jurisdictions do not allow limitations on how long an implied
warranty lasts and some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which
vary from jurisdiction to jurisdiction.
To find the Epson Authorized Reseller nearest you, visit our website
at: www.epson.com.
To find the Epson Customer Care Center nearest you, visit
www.epson.com/support or write to:
Epson America, Inc., P. O. Box 93012, Long Beach, CA 90809-3012
67
P6000-7000Basics.book Page 68 We dnesday, April 23, 2008 2:25 PM
68
P6000-7000Basics.book Page 69 We dnesday, April 23, 2008 2:25 PM
Index
A
C
A/V cable, 34
AC adapter, connecting, 9
Access light, 18, 20
Audio
copying files to viewer,
43 to 45
file formats, 43
playing, 45 to 48
problems, 57
Cable, A/V, 34
CF Card slot, 18 to 19
CompactFlash
adapter, 17
cards, 17, 18 to 19
Computer, backing up to,
54 to 55
B
Backing up
memory card, 21 to 24
USB device, 38
viewer, 40, 54 to 55
Backup Files folder
copying files from,
49 to 53
copying files to, 21, 38
Battery
charging, 9
installing, 8
recycling, 62
replacing, 58
safety, 60 to 62
storing, 61
D
Date and time, setting,
11 to 12, 22, 39
Declaration of Conformity, 64
Deleting files, 25, 53
Details view, 29
Disk space, 56
Display button, 29 to 30
Displaying
folder views, 29
image information, 30
E
Epson
contacting, 58 to 59
Link2 software, 6
Store, 58
warranty, 65 to 67
69
P6000-7000Basics.book Page 70 We dnesday, April 23, 2008 2:25 PM
F
I
FCC Compliance Statement,
63 to 64
File formats, 26, 43
Files
copying from memory
card, 21 to 24
copying to and from USB
devices, 38 to 42
copying to computer,
54 to 55
deleting, 25, 53
locking, 53
moving to folder, 49 to 52
problems, 56
Flickering, 35
Folder view, changing, 29
Folders
creating, 51 to 52
renaming, 53
viewing contents, 29
Images
copying to folder, 49 to 52
displaying as slide show,
31 to 32
displaying information, 30
file formats, 26
problems, 35, 57
rating, 30 to 31
viewing, 27 to 30
viewing on TV, 34 to 35
zooming, 28
H
Hard drive space, 56
Headphones, 45
Hold button, 56
70
K
Keyboard, on-screen, 24, 42,
52
L
Language, selecting, 11
Link2 software
about, 6
installing, 13 to 16
moving ratings with, 31
transferring data, 55
transferring music files, 44
Locking files, 53
P6000-7000Basics.book Page 71 We dnesday, April 23, 2008 2:25 PM
M
Q
Memory card
access light, 18, 20
adapter, 17
copying files, 21 to 24
deleting files, 25
inserting and removing,
17 to 20
types, 17
Mini-thumbnail view, 29
MultiMediaCard, 17
Music
copying to viewer, 43 to 45
file formats, 43
playing, 45 to 48
My Photos folder, copying
files to, 24
My Videos folder, copying
files to, 24
QuickTime, installing, 15
P
P-6000/P-7000, see Viewer
Photos, see Images
Playing
music, 45 to 48
videos, 32 to 34
Problems, solving, 56 to 57
Protecting files, 53
R
Rating images, 30 to 31
RAW files, 26
Renaming folder, 53
Resetting viewer, 57
S
Safety instructions, 60 to 62
Screen problems, 57
SD Card slot, 20
SD cards, 17
Setting up viewer, 7 to 16
Shuffle, 48
Shutting down viewer, 10
Sleep mode, 10
Slide show
clock, 32
creating, 31 to 32
duration, 32
effects, 32
music, 32
Software
description, 6
installing, 13 to 16
Support, technical, 58 to 59
71
P6000-7000Basics.book Page 72 We dnesday, April 23, 2008 2:25 PM
T
Technical support, 58 to 59
Thumbnail view, 29
Troubleshooting, 56 to 57
Turning viewer on and off, 10
TV
connecting to, 34
displaying on, 34 to 35
Viewer
features, 5
resetting, 57
setting up, 7 to 16
sleep mode, 10
turning on and off, 10
W
Warranty, 65 to 67
U
Unpacking, 7
USB devices
connecting, 37
copying files, 38 to 42
types, 36
User’s Guide
about, 6
installing, 13 to 16
V
Video
file formats, 26
playing, 32 to 34
problems, 57
screen size, 33
viewing on TV, 34 to 35
72
Z
Zooming images, 28