Epson LS10000 Start Here and Warranty

PowerLite® Pro Cinema LS10000
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide (see the ”Where to get help” section).
Turn on your equipment
Adjust the image
Viewing 3D images
1
Turn on your video source.
1Press the Pattern button on the remote control to display a test pattern.
2
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector.
Plug in the projector.
1
Choose a location
Note: Make sure you set the video device to play content in 3D mode.
To raise the image or correct a tilted image, adjust the front feet as
2
Keep the projector level and place it at a
height so its lens is even with the top or
bottom of the screen and is centered
horizontally. If this isn’t possible, use the
lens shift feature or the keystone correction
button on the projector to reposition the
image (see “Adjust the image”).
2
shown below.
Press the
3
Press the 2D/3D button on the remote control, if necessary.
3Slide the power switch on your 3D glasses to the On position.
power button on the projector or the On button on the
remote control. The shutter opens and the power light flashes blue,
then stays on.
Press the Lens button on the remote control and use the
3
To view 3D images correctly, RF 3D glasses
must be worn within 32 feet (10 m) of the
projector. Use the image to determine the
viewing distance for 3D projection (the
shading represents the 3D viewing area):
Turn on and begin playback on the 3D-compatible video device.
and
buttons
to focus the image.
Note: To shut down the projector, press the
See the online User’s Guide for more information on where to place your
projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online User’s Guide.
Video device
1Loosen the two screws at the bottom of the cable cover, then pull the
power button on the
projector or the Standby button on the remote control.
Note: If the glasses don’t automatically display 3D content, you may
need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the Pairing button on the
3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.
The default language of the menu system is English. To select another
4
language, press the Menu button on the projector or remote control.
Select Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the menu
system.
4Press the Lens button on the remote control again and use the
Using the remote control
and
buttons to reduce or enlarge the image.
Make sure the batteries are installed as shown (two AA batteries).
cover forward.
5Press the Lens button on the remote control again and use the
and
,
,
buttons to reposition the image.
You can also automatically convert 2D HDMI content to 3D. To enable the
2D-to-3D Conversion option, press the Menu button on the projector or
remote control. Select Signal and press Enter, then select 3D Setup and
press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak,
Medium, or Strong setting, then press Enter.
See the online User’s Guide for more information on adjusting 3D images.
2Lift the cable cover out of the grooves at the top.
Turn projector on
Choose which source
to display
Turn projector off
Turn off projector
display
Troubleshooting
If you see a blank screen or the No signal message after turning on your
video device or computer, check the following:
Control connected
sources with
HDMI Link
Adjust zoom, focus
and lens shift
3Connect up to 4 video devices and use the Source buttons on the remote
control or the
button on the projector to switch between them.
Switch between
2D and 3D
•Make sure the power light on the projector is blue and not flashing.
Navigate projector
menus
•
Press the
button on the projector or one of the Source buttons on
the remote control to switch to the correct image source, if necessary.
•
If you’re using a Windows® laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
Access projector
menus
Change the
3D format
Display test pattern
HDMI cable
6If your image looks like
or
, you can use the
button on the
projector to correct this.
Component video cable
RCA video cable
For more information on using the remote control, see the online
User’s Guide.
Note: Using the keystone adjustment can affect the size and effective
resolution of your image. If possible, change the position of your
projector to eliminate the keystone effect and use the lens shift option to
position the image as necessary.
4126297Rev.0
1-F
C
4126297Rev.0
1-F
M
If 3D images aren’t displaying properly, check the following:
•
Press the 2D/3D button to switch to 3D viewing mode, if necessary.
•
Make sure that you are within the 3D viewing range. See “Choose a
location” on the front of this sheet or the online User’s Guide for more
information.
4126297Rev.0
1-F
Y
4126297Rev.0
1-F
K
PowerLite® Pro Cinema LS10000
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User’s Guide (see the ”Where to get help” section).
Turn on your equipment
Adjust the image
Viewing 3D images
1
Turn on your video source.
1Press the Pattern button on the remote control to display a test pattern.
2
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector.
Plug in the projector.
1
Choose a location
Note: Make sure you set the video device to play content in 3D mode.
To raise the image or correct a tilted image, adjust the front feet as
2
Keep the projector level and place it at a
height so its lens is even with the top or
bottom of the screen and is centered
horizontally. If this isn’t possible, use the
lens shift feature or the keystone correction
button on the projector to reposition the
image (see “Adjust the image”).
2
shown below.
Press the
3
Press the 2D/3D button on the remote control, if necessary.
3Slide the power switch on your 3D glasses to the On position.
power button on the projector or the On button on the
remote control. The shutter opens and the power light flashes blue,
then stays on.
Press the Lens button on the remote control and use the
3
To view 3D images correctly, RF 3D glasses
must be worn within 32 feet (10 m) of the
projector. Use the image to determine the
viewing distance for 3D projection (the
shading represents the 3D viewing area):
Turn on and begin playback on the 3D-compatible video device.
and
buttons
to focus the image.
Note: To shut down the projector, press the
See the online User’s Guide for more information on where to place your
projector.
Connect the projector
Choose from the following connections. For additional connection types, see
the online User’s Guide.
Video device
1Loosen the two screws at the bottom of the cable cover, then pull the
power button on the
projector or the Standby button on the remote control.
Note: If the glasses don’t automatically display 3D content, you may
need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the Pairing button on the
3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.
The default language of the menu system is English. To select another
4
language, press the Menu button on the projector or remote control.
Select Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the menu
system.
4Press the Lens button on the remote control again and use the
Using the remote control
and
buttons to reduce or enlarge the image.
Make sure the batteries are installed as shown (two AA batteries).
cover forward.
5Press the Lens button on the remote control again and use the
and
,
,
buttons to reposition the image.
You can also automatically convert 2D HDMI content to 3D. To enable the
2D-to-3D Conversion option, press the Menu button on the projector or
remote control. Select Signal and press Enter, then select 3D Setup and
press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak,
Medium, or Strong setting, then press Enter.
See the online User’s Guide for more information on adjusting 3D images.
2Lift the cable cover out of the grooves at the top.
Turn projector on
Choose which source
to display
Turn projector off
Turn off projector
display
Troubleshooting
If you see a blank screen or the No signal message after turning on your
video device or computer, check the following:
Control connected
sources with
HDMI Link
Adjust zoom, focus
and lens shift
3Connect up to 4 video devices and use the Source buttons on the remote
control or the
button on the projector to switch between them.
Switch between
2D and 3D
•Make sure the power light on the projector is blue and not flashing.
Navigate projector
menus
•
Press the
button on the projector or one of the Source buttons on
the remote control to switch to the correct image source, if necessary.
•
If you’re using a Windows® laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
Access projector
menus
Change the
3D format
Display test pattern
HDMI cable
6If your image looks like
or
, you can use the
button on the
projector to correct this.
Component video cable
RCA video cable
For more information on using the remote control, see the online
User’s Guide.
Note: Using the keystone adjustment can affect the size and effective
resolution of your image. If possible, change the position of your
projector to eliminate the keystone effect and use the lens shift option to
position the image as necessary.
4126297Rev.0
1-F
C
4126297Rev.0
1-F
M
If 3D images aren’t displaying properly, check the following:
•
Press the 2D/3D button to switch to 3D viewing mode, if necessary.
•
Make sure that you are within the 3D viewing range. See “Choose a
location” on the front of this sheet or the online User’s Guide for more
information.
4126297Rev.0
1-F
Y
4126297Rev.0
1-F
K
•
Check that your 3D glasses are charged and have not entered standby
mode. Slide the power switch on the 3D glasses to the Off position, then
back to the On position.
•
Press the Menu button on your remote control, select the Signal menu,
select 3D Setup, and then select 3D Format. Make sure that the Auto
option is selected.
•
Check that your video device and media are both 3D-compatible. Refer
to the documentation that came with your video device for more
information.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online manual (requires an Internet connection). If you don’t
have a User’s Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.
Telephone support services
To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (US) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase additional RF 3D glasses (part number V12H548006) or other
accessories from an Epson authorized reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766). Or you can purchase online at
epsonstore.com (U.S. sales) or epson.ca (Canadian sales).
Notices
Laser
Complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Bluetooth Safety and Specifications
Contains Bluetooth module model: DBUB-E207
This document provides safety instructions and describes the specifications.
Read this document carefully before use to ensure your safety and product
performance.
U.S.
Contains FCC ID: BKMAE-E207
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 7.8 inches (20 cm) between the radiator and
your body.
Canada
Contains IC: 1052D-E207
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body.
Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals;
and/or CPU Boards and Power Supplies used with Class B Personal Computers
We: Located at: Tel: Epson America, Inc.
3840 Kilroy Airport Way MS: 3-13
Long Beach, CA 90806
(562) 981-3840
Declare under sole responsibility that the product identified herein, complies
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each
product marketed, is identical to the representative unit tested and found
to be compliant with the standards. Records maintained continue to reflect
the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as
required by 47CFR 2.909. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Trade Name: Epson
Type of Product: Projector
Model: H488A
Marketing Name: PowerLite Pro Cinema LS10000
Epson America, Inc. Limited Warranty
In Canada, warranties include both warranties and conditions.
Three-Year Projector, and 1-Year 3D Glasses Limited Warranty
Arbitration, Governing Laws: Any disputes arising out of this Agreement
will be settled by arbitration to be conducted before a single arbitrator in
Los Angeles, California, in accordance with the commercial Arbitration Rules
of the American Arbitration Association, and judgment upon the award
rendered by the arbitrator may be entered in any court having jurisdiction
thereof. This Agreement shall be construed in accordance with the laws of the
State of California, except this arbitration clause which shall be construed in
accordance with the Federal Arbitration Act.
What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail
purchaser of the Epson projector product enclosed with this limited warranty
statement that the projector, if purchased new and operated in the United
States, Canada, or Puerto Rico, will be free from defects in workmanship and
materials for a period of three (3) years from the date of original purchase. This
limited warranty applies only to the projector and not to the 3D glasses. The 3D
glasses carry a limited warranty period of one (1) year from the date of original
purchase. For warranty service, you must provide proof of the date of original
purchase.
What Epson Will Do To Correct Problems: If your product requires service
during the limited warranty period, please call Epson at the number on the
bottom of this statement and be prepared to provide the model, serial number,
and date of original purchase. Epson will, at its option, repair or replace
the defective unit, without charge for parts or labor. If Epson authorizes an
exchange for the defective projector, Epson will ship a replacement product
to you, freight prepaid, so long as you use an address in the United States,
Canada, or Puerto Rico. You are responsible for securely packaging the
defective unit and returning it to Epson within five (5) working days of receipt
of the replacement. Epson requires a debit or a credit card number to secure
the cost of the replacement product in the event that you fail to return the
defective one. When Epson authorizes an exchange for defective 3D glasses,
you must first send in the defective glasses to Epson. Once we have received
your defective glasses Epson will ship a replacement product to you, freight
prepaid, so long as you use an address in the United States, Canada, or Puerto
Rico. If Epson authorizes repair instead of exchange, Epson will direct you to
send your product to Epson or its authorized service center, where the product
will be repaired and sent back to you. You are responsible for packing the
product and for all costs to and from the Epson authorized service center. When
warranty service involves the exchange of the product or of a part, the item
replaced becomes Epson property. The exchanged product or part may be new
or refurbished to the Epson standard of quality, and at Epson’s option, the
replacement may be another model of like kind and quality. Epson’s liability
for replacement of the covered product will not exceed the original retail
selling price of the covered product. Exchange or replacement products or parts
assume the remaining warranty period of the product covered by this limited
warranty.
To find the Epson Authorized Reseller nearest you, please visit our website at:
epson.com.
To find the Epson Customer Care Center nearest you, please visit
epson.com/support.
To contact the Epson ConnectionSM, please call (800) 637-7661 or
(562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to
Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.
What This Warranty Does Not Cover: This warranty covers only normal use
in the United States, Canada, or Puerto Rico. Excessive continual use is not
considered normal use. This warranty does not cover consumables such as
filters. This warranty is not transferable. Epson is not responsible for warranty
service should the Epson label or logo or the rating label or serial number be
removed. Epson is not responsible for warranty service should the product fail
to be properly maintained or fail to function properly as a result of misuse,
abuse, improper installation, neglect, improper shipping, damage caused
by disasters such as fire, flood, and lightning, improper electrical current,
software problems, add-in cards or cables, interaction with non-Epson products,
or service other than by Epson or an Epson Authorized Servicer. Postage,
insurance, or shipping costs incurred in presenting your Epson product for
carry-in warranty service are your responsibility. If a claimed defect cannot
be identified or reproduced in service, you will be held responsible for costs
incurred.
DISCLAIMER OF WARRANTIES: THE WARRANTY AND REMEDY PROVIDED
ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR
IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NON-INFRINGEMENT. UNLESS STATED HEREIN, ANY STATEMENTS OR
REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
Remedies: Your exclusive remedy and Epson’s entire liability for a material
breach of this Agreement will be limited to a refund of the price paid for the
Epson products covered by this Agreement. Any action for breach of warranty
must be brought within 3 months of the expiration date of the warranty.
Epson is not liable for performance delays or for nonperformance due to causes
beyond its reasonable control. Except as provided in this written warranty,
neither Epson nor its affiliates shall be liable for any loss, inconvenience,
or damage, including direct, special, incidental or consequential damages,
including lost profits, cost of substitute equipment, downtime, claims of third
parties, including customers, or injury to property, resulting from the use
or inability to use the Epson products, whether resulting from a breach of
warranty or any other legal theory. Some jurisdictions do not allow limits on
warranties or remedies for breach in certain transactions. In such jurisdictions,
the limits in this paragraph and the preceding paragraph may not apply.
EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of
Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Mac is a registered trademark of Apple Inc., registered in the US and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 4/14
Printed in XXXXXX
CPD-40290
4126297Rev.0
1-B
C
4126297Rev.0
1-B
M
4126297Rev.0
1-B
Y
4126297Rev.0
1-B
K
•
Check that your 3D glasses are charged and have not entered standby
mode. Slide the power switch on the 3D glasses to the Off position, then
back to the On position.
•
Press the Menu button on your remote control, select the Signal menu,
select 3D Setup, and then select 3D Format. Make sure that the Auto
option is selected.
•
Check that your video device and media are both 3D-compatible. Refer
to the documentation that came with your video device for more
information.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online manual (requires an Internet connection). If you don’t
have a User’s Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.
Telephone support services
To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (US) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase additional RF 3D glasses (part number V12H548006) or other
accessories from an Epson authorized reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766). Or you can purchase online at
epsonstore.com (U.S. sales) or epson.ca (Canadian sales).
Notices
Laser
Complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Bluetooth Safety and Specifications
Contains Bluetooth module model: DBUB-E207
This document provides safety instructions and describes the specifications.
Read this document carefully before use to ensure your safety and product
performance.
U.S.
Contains FCC ID: BKMAE-E207
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 7.8 inches (20 cm) between the radiator and
your body.
Canada
Contains IC: 1052D-E207
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body.
Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals;
and/or CPU Boards and Power Supplies used with Class B Personal Computers
We: Located at: Tel: Epson America, Inc.
3840 Kilroy Airport Way MS: 3-13
Long Beach, CA 90806
(562) 981-3840
Declare under sole responsibility that the product identified herein, complies
with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each
product marketed, is identical to the representative unit tested and found
to be compliant with the standards. Records maintained continue to reflect
the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as
required by 47CFR 2.909. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Trade Name: Epson
Type of Product: Projector
Model: H488A
Marketing Name: PowerLite Pro Cinema LS10000
Epson America, Inc. Limited Warranty
In Canada, warranties include both warranties and conditions.
Three-Year Projector, and 1-Year 3D Glasses Limited Warranty
Arbitration, Governing Laws: Any disputes arising out of this Agreement
will be settled by arbitration to be conducted before a single arbitrator in
Los Angeles, California, in accordance with the commercial Arbitration Rules
of the American Arbitration Association, and judgment upon the award
rendered by the arbitrator may be entered in any court having jurisdiction
thereof. This Agreement shall be construed in accordance with the laws of the
State of California, except this arbitration clause which shall be construed in
accordance with the Federal Arbitration Act.
What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail
purchaser of the Epson projector product enclosed with this limited warranty
statement that the projector, if purchased new and operated in the United
States, Canada, or Puerto Rico, will be free from defects in workmanship and
materials for a period of three (3) years from the date of original purchase. This
limited warranty applies only to the projector and not to the 3D glasses. The 3D
glasses carry a limited warranty period of one (1) year from the date of original
purchase. For warranty service, you must provide proof of the date of original
purchase.
What Epson Will Do To Correct Problems: If your product requires service
during the limited warranty period, please call Epson at the number on the
bottom of this statement and be prepared to provide the model, serial number,
and date of original purchase. Epson will, at its option, repair or replace
the defective unit, without charge for parts or labor. If Epson authorizes an
exchange for the defective projector, Epson will ship a replacement product
to you, freight prepaid, so long as you use an address in the United States,
Canada, or Puerto Rico. You are responsible for securely packaging the
defective unit and returning it to Epson within five (5) working days of receipt
of the replacement. Epson requires a debit or a credit card number to secure
the cost of the replacement product in the event that you fail to return the
defective one. When Epson authorizes an exchange for defective 3D glasses,
you must first send in the defective glasses to Epson. Once we have received
your defective glasses Epson will ship a replacement product to you, freight
prepaid, so long as you use an address in the United States, Canada, or Puerto
Rico. If Epson authorizes repair instead of exchange, Epson will direct you to
send your product to Epson or its authorized service center, where the product
will be repaired and sent back to you. You are responsible for packing the
product and for all costs to and from the Epson authorized service center. When
warranty service involves the exchange of the product or of a part, the item
replaced becomes Epson property. The exchanged product or part may be new
or refurbished to the Epson standard of quality, and at Epson’s option, the
replacement may be another model of like kind and quality. Epson’s liability
for replacement of the covered product will not exceed the original retail
selling price of the covered product. Exchange or replacement products or parts
assume the remaining warranty period of the product covered by this limited
warranty.
To find the Epson Authorized Reseller nearest you, please visit our website at:
epson.com.
To find the Epson Customer Care Center nearest you, please visit
epson.com/support.
To contact the Epson ConnectionSM, please call (800) 637-7661 or
(562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to
Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.
What This Warranty Does Not Cover: This warranty covers only normal use
in the United States, Canada, or Puerto Rico. Excessive continual use is not
considered normal use. This warranty does not cover consumables such as
filters. This warranty is not transferable. Epson is not responsible for warranty
service should the Epson label or logo or the rating label or serial number be
removed. Epson is not responsible for warranty service should the product fail
to be properly maintained or fail to function properly as a result of misuse,
abuse, improper installation, neglect, improper shipping, damage caused
by disasters such as fire, flood, and lightning, improper electrical current,
software problems, add-in cards or cables, interaction with non-Epson products,
or service other than by Epson or an Epson Authorized Servicer. Postage,
insurance, or shipping costs incurred in presenting your Epson product for
carry-in warranty service are your responsibility. If a claimed defect cannot
be identified or reproduced in service, you will be held responsible for costs
incurred.
DISCLAIMER OF WARRANTIES: THE WARRANTY AND REMEDY PROVIDED
ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR
IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NON-INFRINGEMENT. UNLESS STATED HEREIN, ANY STATEMENTS OR
REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
Remedies: Your exclusive remedy and Epson’s entire liability for a material
breach of this Agreement will be limited to a refund of the price paid for the
Epson products covered by this Agreement. Any action for breach of warranty
must be brought within 3 months of the expiration date of the warranty.
Epson is not liable for performance delays or for nonperformance due to causes
beyond its reasonable control. Except as provided in this written warranty,
neither Epson nor its affiliates shall be liable for any loss, inconvenience,
or damage, including direct, special, incidental or consequential damages,
including lost profits, cost of substitute equipment, downtime, claims of third
parties, including customers, or injury to property, resulting from the use
or inability to use the Epson products, whether resulting from a breach of
warranty or any other legal theory. Some jurisdictions do not allow limits on
warranties or remedies for breach in certain transactions. In such jurisdictions,
the limits in this paragraph and the preceding paragraph may not apply.
EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of
Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Mac is a registered trademark of Apple Inc., registered in the US and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 4/14
Printed in XXXXXX
CPD-40290
4126297Rev.0
1-B
C
4126297Rev.0
1-B
M
4126297Rev.0
1-B
Y
4126297Rev.0
1-B
K