WorkForce Pro WP-4533 Series
®
Start Here
3 Select settings
1
French
control panel
sticker
2
Select your country and press OK.
3
Select Summer if Daylight Saving Time is in effect
(spring through summer); otherwise, select Winter.
Press OK.
4
Select the date format and press OK.
5
Use the numeric keypad to set the date and press OK.
6
Select 12h (AM/PM) or 24h and press OK.
7
Use the numeric keypad to set the time and press OK.
Note: You can change the date and time settings by pressing
Setup, selecting Printer Setup, then selecting Date/Time.
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
4 Install ink cartridges
1
6
Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
Gently insert the paper cassette at the bottom of the
printer.
When you see this menu on your product’s LCD screen,
do not press the OK button yet. Continue with the
instructions in the following sections to load paper in
your product and install software.
5 Load paper in the cassette
You can load letter-, A4-, or legal-size plain paper in the
cassette. For instructions on loading envelopes and special
paper in the rear MP tray, see the online User’s Guide.
1
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
Pull out the paper cassette.
6
Open the front cover.
2
2
4
Caution: Don’t turn off the printer or open the cover while it is
priming or you’ll waste ink.
To select English as your language, press OK.
If you want to change the language, select it and
press OK.
Read these instructions before using your product.
1 Unpack
Note: The included cartridges prime the printer and print about
1000 black pages/900 color pages. Actual page count will vary.
Unpack the four ink cartridges.
Extend the output tray and raise the paper stopper as
shown. (Do not raise the paper stopper for legal-size
paper.)
Slide the edge guides outward, and position them for the
type of paper you are using.
6 Connect the fax line
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on the back of your product. To
connect a telephone or answering machine, use the EXT. port
on your product. See the online User’s Guide for more details.
2 Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
3
Shake each cartridge as shown for about 5 seconds.
Note: If loading legal-size paper, extend the cassette as shown.
4
Install each cartridge in the correct slot for its color. Push
each cartridge in until it clicks.
3
Insert the paper with the printable side facedown.
Caution: Do not connect to your computer yet.
2
Press the
Note: If you’re connecting to a DSL phone line, you must use a DSL
filter or you won’t be able to fax. Contact your DSL provider for the
necessary filter.
power button.
5
Close the front cover.
Note: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
*412238200*
*412238200*
The printer starts priming the ink. This takes about
12 minutes. When you see a confirmation message on
the product’s LCD screen, priming is complete.
4122382
1-F
Rev.0
C
4122382
1-F
Rev.0
M
4122382
1-F
Rev.0
Y
4122382
1-F
Rev.0
K
WorkForce Pro WP-4533 Series
®
Start Here
3 Select settings
1
French
control panel
sticker
2
Select your country and press OK.
3
Select Summer if Daylight Saving Time is in effect
(spring through summer); otherwise, select Winter.
Press OK.
4
Select the date format and press OK.
5
Use the numeric keypad to set the date and press OK.
6
Select 12h (AM/PM) or 24h and press OK.
7
Use the numeric keypad to set the time and press OK.
Note: You can change the date and time settings by pressing
Setup, selecting Printer Setup, then selecting Date/Time.
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
4 Install ink cartridges
1
6
Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
Gently insert the paper cassette at the bottom of the
printer.
When you see this menu on your product’s LCD screen,
do not press the OK button yet. Continue with the
instructions in the following sections to load paper in
your product and install software.
5 Load paper in the cassette
You can load letter-, A4-, or legal-size plain paper in the
cassette. For instructions on loading envelopes and special
paper in the rear MP tray, see the online User’s Guide.
1
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
Pull out the paper cassette.
6
Open the front cover.
2
2
4
Caution: Don’t turn off the printer or open the cover while it is
priming or you’ll waste ink.
To select English as your language, press OK.
If you want to change the language, select it and
press OK.
Read these instructions before using your product.
1 Unpack
Note: The included cartridges prime the printer and print about
1000 black pages/900 color pages. Actual page count will vary.
Unpack the four ink cartridges.
Extend the output tray and raise the paper stopper as
shown. (Do not raise the paper stopper for legal-size
paper.)
Slide the edge guides outward, and position them for the
type of paper you are using.
6 Connect the fax line
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on the back of your product. To
connect a telephone or answering machine, use the EXT. port
on your product. See the online User’s Guide for more details.
2 Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
3
Shake each cartridge as shown for about 5 seconds.
Note: If loading legal-size paper, extend the cassette as shown.
4
Install each cartridge in the correct slot for its color. Push
each cartridge in until it clicks.
3
Insert the paper with the printable side facedown.
Caution: Do not connect to your computer yet.
2
Press the
Note: If you’re connecting to a DSL phone line, you must use a DSL
filter or you won’t be able to fax. Contact your DSL provider for the
necessary filter.
power button.
5
Close the front cover.
Note: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
*412238200*
*412238200*
The printer starts priming the ink. This takes about
12 minutes. When you see a confirmation message on
the product’s LCD screen, priming is complete.
4122382
1-F
Rev.0
C
4122382
1-F
Rev.0
M
4122382
1-F
Rev.0
Y
4122382
1-F
Rev.0
K
7 Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see “Epson technical
support”).
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
Setup is unable to find my printer after connecting it
with a USB cable.
Connection options
Make sure it is securely connected as shown:
Wireless connection
Presentation Paper Matte
Smooth, non-glare, instant-drying paper
ideal for reports, newsletters, and graphical
presentations.
Any questions?
Genuine Epson inks
On-screen help with your software
Make sure you know your network name (SSID) and network
password:
Windows®: If you see a Found
New Hardware screen, click
Cancel and disconnect the USB
cable. You can’t install your
software that way.
• Network password
If you don’t have this information, contact the person who set
up your network.
Make sure you have a USB cable (not included).
Wired network connection
Insert your product CD.
®
3
Windows: If you see the AutoPlay
window, click Run Setup.exe. If you
see the User Account Control screen,
click Yes or Continue.
Mac OS® X: Double-click the
4
Epson icon.
Click Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
Make sure you have an Ethernet network cable (not
included). You must install the software on every computer
from which you want to print.
Any problems?
If you experience problems during setup, see below:
Make sure you remove the protective foam and plastic from
inside the printer.
Network setup was unsuccessful.
• Make sure you select the right network name.
When you see the Select Your Connection screen, check
the “Connection options” section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Click the icon on your desktop (or in the Applications/Epson
Software/Guide folder in Mac OS X) to access the online
User’s Guide, software downloads, Epson Supplies Central®,
and more (requires an Internet connection). If you don’t have
a User’s Guide icon, you can install it from the CD or go to the
Epson website, as described below.
Epson technical support
Visit epson.com/support (U.S.) or epson.ca/support
(Canada) where you can download drivers, view manuals, get
FAQs, or e-mail Epson.
You may also speak with a support specialist by calling:
• U.S.: (562) 276-4382, 6 AM to 8 PM, Pacific Time, Monday
through Friday, and 7 AM to 4 PM Saturday
The printer makes a loud noise and you see an error
message when you turn it on.
5
Look for the numbers below
to find your cartridges. It’s as
easy as remembering your number!
Select Help or ? when you’re using your software.
User’s Guide
• Network name
Direct USB connection
2
Epson offers a wide variety of business and photo papers
to meet your needs; visit Epson Supplies Central for more
information.
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a temporary USB cable connection to simplify wireless
setup. After the printer is connected to the network, you will
be prompted to remove the cable.
If you’re using Mac OS X 10.6 or 10.7, or you don’t have
a USB cable, you will need to use the control panel on the
printer to select wireless settings. Follow the instructions on
your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
Make sure the printer is
NOT CONNECTED to your
computer.
Genuine Epson paper
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc)
letters, make sure you enter them correctly.
• Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time,
Monday through Friday
WorkForce Pro WP-4533 Series ink cartridges
Color
High-capacity
Super High-capacity
Black
676XL
711XXL
Cyan
676XL
711XXL
Magenta
676XL
711XXL
Yellow
676XL
711XXL
Epson Connect
Get instant, wireless printing of photos and
attachments right from smartphones, iPads,
tablets, and other popular mobile devices.
See www.epson.com/connect for details.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
Software technical support
ABBYY® FineReader®
(408) 457-9777
www.abbyyusa.com
support@abbyyusa.com
Recycling
Epson offers a recycling program for end of life hardware
and ink cartridges. Please go to www.epson.com/recycle
for information on how to return your products for proper
disposal.
Need paper and ink?
Function buttons
Press , , , or
function button.
on the printer to highlight a letter or
Try Epson paper with DURABrite® Ultra Ink for professional
results. For the right supplies at the right time, you can
purchase them at Epson Supplies Central at
www.epson.com/ink3 (U.S. sales) or www.epson.ca
(Canadian sales). You can also purchase supplies from an
Epson authorized reseller. To find the nearest one,
call 800-GO-EPSON (800-463-7766).
Press OK to select it.
Note: Passwords must be entered in the correct case. Use the
function buttons to select uppercase (AB12), lowercase (ab12),
symbols (!#%@), or spaces, and to delete characters (
).
WorkForce, Epson, Epson Supplies Central, and DURABrite are registered trademarks, and
Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Designed for
Excellence is a trademark of Epson America, Inc.
Highlight Done and press OK.
The printer’s screen is dark.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
Press any button to wake the printer from sleep mode.
This information is subject to change without notice.
© 2011 Epson America, Inc. 11/11
CPD-36120
Printed in XXXXXX
4122382
1-B
Rev.0
C
4122382
1-B
Rev.0
M
4122382
1-B
Rev.0
Y
4122382
1-B
Rev.0
K
7 Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see “Epson technical
support”).
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
Setup is unable to find my printer after connecting it
with a USB cable.
Connection options
Make sure it is securely connected as shown:
Wireless connection
Presentation Paper Matte
Smooth, non-glare, instant-drying paper
ideal for reports, newsletters, and graphical
presentations.
Any questions?
Genuine Epson inks
On-screen help with your software
Make sure you know your network name (SSID) and network
password:
Windows®: If you see a Found
New Hardware screen, click
Cancel and disconnect the USB
cable. You can’t install your
software that way.
• Network password
If you don’t have this information, contact the person who set
up your network.
Make sure you have a USB cable (not included).
Wired network connection
Insert your product CD.
®
3
Windows: If you see the AutoPlay
window, click Run Setup.exe. If you
see the User Account Control screen,
click Yes or Continue.
Mac OS® X: Double-click the
4
Epson icon.
Click Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
Make sure you have an Ethernet network cable (not
included). You must install the software on every computer
from which you want to print.
Any problems?
If you experience problems during setup, see below:
Make sure you remove the protective foam and plastic from
inside the printer.
Network setup was unsuccessful.
• Make sure you select the right network name.
When you see the Select Your Connection screen, check
the “Connection options” section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Click the icon on your desktop (or in the Applications/Epson
Software/Guide folder in Mac OS X) to access the online
User’s Guide, software downloads, Epson Supplies Central®,
and more (requires an Internet connection). If you don’t have
a User’s Guide icon, you can install it from the CD or go to the
Epson website, as described below.
Epson technical support
Visit epson.com/support (U.S.) or epson.ca/support
(Canada) where you can download drivers, view manuals, get
FAQs, or e-mail Epson.
You may also speak with a support specialist by calling:
• U.S.: (562) 276-4382, 6 AM to 8 PM, Pacific Time, Monday
through Friday, and 7 AM to 4 PM Saturday
The printer makes a loud noise and you see an error
message when you turn it on.
5
Look for the numbers below
to find your cartridges. It’s as
easy as remembering your number!
Select Help or ? when you’re using your software.
User’s Guide
• Network name
Direct USB connection
2
Epson offers a wide variety of business and photo papers
to meet your needs; visit Epson Supplies Central for more
information.
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a temporary USB cable connection to simplify wireless
setup. After the printer is connected to the network, you will
be prompted to remove the cable.
If you’re using Mac OS X 10.6 or 10.7, or you don’t have
a USB cable, you will need to use the control panel on the
printer to select wireless settings. Follow the instructions on
your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
Make sure the printer is
NOT CONNECTED to your
computer.
Genuine Epson paper
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc)
letters, make sure you enter them correctly.
• Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time,
Monday through Friday
WorkForce Pro WP-4533 Series ink cartridges
Color
High-capacity
Super High-capacity
Black
676XL
711XXL
Cyan
676XL
711XXL
Magenta
676XL
711XXL
Yellow
676XL
711XXL
Epson Connect
Get instant, wireless printing of photos and
attachments right from smartphones, iPads,
tablets, and other popular mobile devices.
See www.epson.com/connect for details.
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
Software technical support
ABBYY® FineReader®
(408) 457-9777
www.abbyyusa.com
support@abbyyusa.com
Recycling
Epson offers a recycling program for end of life hardware
and ink cartridges. Please go to www.epson.com/recycle
for information on how to return your products for proper
disposal.
Need paper and ink?
Function buttons
Press , , , or
function button.
on the printer to highlight a letter or
Try Epson paper with DURABrite® Ultra Ink for professional
results. For the right supplies at the right time, you can
purchase them at Epson Supplies Central at
www.epson.com/ink3 (U.S. sales) or www.epson.ca
(Canadian sales). You can also purchase supplies from an
Epson authorized reseller. To find the nearest one,
call 800-GO-EPSON (800-463-7766).
Press OK to select it.
Note: Passwords must be entered in the correct case. Use the
function buttons to select uppercase (AB12), lowercase (ab12),
symbols (!#%@), or spaces, and to delete characters (
).
WorkForce, Epson, Epson Supplies Central, and DURABrite are registered trademarks, and
Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Designed for
Excellence is a trademark of Epson America, Inc.
Highlight Done and press OK.
The printer’s screen is dark.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. Epson disclaims any and all rights in those
marks.
Press any button to wake the printer from sleep mode.
This information is subject to change without notice.
© 2011 Epson America, Inc. 11/11
CPD-36120
Printed in XXXXXX
4122382
1-B
Rev.0
C
4122382
1-B
Rev.0
M
4122382
1-B
Rev.0
Y
4122382
1-B
Rev.0
K