advertisement
Remote Control Map
Turn the projector on and off
Select a source
Open projector menus
Navigate through menu settings; move pointer
Select menu settings
Change slides or pages in a presentation
(optional wireless mouse receiver required)
Temporarily turn off display
Automatically adjust computer image
Change the aspect ratio
Display on-screen help
Switch image sources
Remote control ID switch
Open menus assigned by user
Cancel current operation or return to previous menu
Activate screen pointer
Zoom in and out
Freeze the image
Select from 8 color modes
Use numeric keys to enter passwords, IP settings, etc.
Enter passwords
Replacement Parts
Product
Replacement lamp
PowerLite 4100
PowerLite 4200W/4300
Air filter
Product Number
V13H010L62
V13H010L63
V13H134A17
You can purchase replacement parts from an
Epson authorized reseller. See “Where To Get
Help” inside this card for more information.
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 8/10
CPD-28113
Printed in XXXXXX
*411953200*
*411953200*
PowerLite ® 4100/4200W/4300
Quick Reference
This Quick Reference card gives brief instructions on connecting your
PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD.
Installing the Manuals
1. Insert the projector CD in your computer’s CD or DVD drive.
(Double-click the Epson installer icon, if necessary.)
2. Select your language, select your projector model, and follow the instructions on the screen to register.
Then click Install Projector User’s
Guides to install the manuals. For
Windows users, click Install Link
to Download EasyMP Monitor to install an icon on your computer’s desktop that you can use to access the EasyMP Monitor software.
3. To view the manuals, double-click the PowerLite 4100_4200W_4300
Guide or EasyMP Monitor
Operation Guide (for Windows users only) icon on your computer’s desktop.
Turning the Projector On
1. Turn on your computer or image source.
2. Remove the lens cover.
3. Press the power button. After the power light stays green, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.
4. If your image does not appear, see
“Switching Between Image Sources” or “Troubleshooting.”
Switching Between Image
Sources
Press the Search button (remote control), one of the Source buttons
(remote control), or the Source
Search button (projector).
Adjusting Image Position
If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position.
Horizontal lens shift dial
Vertical lens shift dial
If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot.
Release the lever to lock the foot in position.
You can fine-tune the height or level the image by turning any of the projector’s adjustable feet. Use the horizontal lens shift dial to move your image left or right.
Focusing and Zooming
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce/enlarge the image.
Correcting Image Shape
• If your image looks like or , press the or button on the projector to correct it. You can also use the remote control to correct the image shape (see the User’s Guide).
• If your image looks like or , press the or button to correct it. You can also use the remote control to correct the image shape (see the User’s Guide).
• If your image is uneven on all sides, you can use Quick Corner ® to adjust the shape. See the User’s Guide.
Changing the Aspect Ratio
Press the Aspect button on the remote control to change the aspect ratio.
For images input through the
Computer1 port, select Normal to automatically resize the image.
Turning the Projector Off
Press the power button to turn the projector off. At the confirmation message, press the power button again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead.
With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.
Troubleshooting
You see a blank screen or the message No signal.
• Make sure the power light on the projector is green and not flashing, and the lens cover is removed.
• Make sure the cables are connected correctly. See the User’s Guide.
• You may need to change the image source. See “Switching Between
Image Sources.” (Also make sure the source device is turned on.)
The projector and the notebook don’t display the same image.
Windows ®
Press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labeled
CRT/LCD or have a key while pressing it. icon, and you may have to hold down the Fn
If that doesn’t work, open the Display utility in the Windows Control Panel
(in Windows Vista ® , right-click on the desktop and select Personalize).
Next, click Change display settings,
Display settings, or Settings and
Advanced or Advanced Settings.
Make sure the external monitor port is set as your primary display and/or enabled. See your computer’s documentation or online help for details.
Mac OS ® X
Select System Preferences, Display or Displays, and Detect Displays.
Then, if you’re using Mac OS X 10.6.x, click Show displays in menu bar. If you’re using a different version of Mac
OS X, select VGA Display or Color
LCD, Arrangement or Arrange, and
Mirror Displays.
Where To Get Help
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail
Epson.
Speak to a support representative
To use the Epson PrivateLine ®
Support service, call (800) 637-7661 and enter the PIN on the included
Epson PrivateLine Support card. This service is available 6 am
to 6 pm
, Pacific
Time, Monday through Friday, for the duration of your warranty period.
You may also speak with a projector support specialist by dialing one of the following numbers.
U.S.: (562) 276-4394, 6 am
to 6 pm
,
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 am
to 6 pm
,
Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Purchase supplies and accessories
You can purchase screens, ceiling mounts, and other accessories from an
Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Installing the Manuals
1. Insert the projector CD in your computer’s CD or DVD drive.
(Double-click the Epson installer icon, if necessary.)
2. Select your language, select your projector model, and follow the instructions on the screen to register.
Then click Install Projector User’s
Guides to install the manuals. For
Windows users, click Install Link
to Download EasyMP Monitor to install an icon on your computer’s desktop that you can use to access the EasyMP Monitor software.
3. To view the manuals, double-click the PowerLite 4100_4200W_4300
Guide or EasyMP Monitor
Operation Guide (for Windows users only) icon on your computer’s desktop.
Turning the Projector On
1. Turn on your computer or image source.
2. Remove the lens cover.
3. Press the power button. After the power light stays green, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.
4. If your image does not appear, see
“Switching Between Image Sources” or “Troubleshooting.”
Switching Between Image
Sources
Press the Search button (remote control), one of the Source buttons
(remote control), or the Source
Search button (projector).
Adjusting Image Position
If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position.
Horizontal lens shift dial
Vertical lens shift dial
If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot.
Release the lever to lock the foot in position.
You can fine-tune the height or level the image by turning any of the projector’s adjustable feet. Use the horizontal lens shift dial to move your image left or right.
Focusing and Zooming
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce/enlarge the image.
Correcting Image Shape
• If your image looks like or , press the or button on the projector to correct it. You can also use the remote control to correct the image shape (see the User’s Guide).
• If your image looks like or , press the or button to correct it. You can also use the remote control to correct the image shape (see the User’s Guide).
• If your image is uneven on all sides, you can use Quick Corner ® to adjust the shape. See the User’s Guide.
Changing the Aspect Ratio
Press the Aspect button on the remote control to change the aspect ratio.
For images input through the
Computer1 port, select Normal to automatically resize the image.
Turning the Projector Off
Press the power button to turn the projector off. At the confirmation message, press the power button again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead.
With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.
Troubleshooting
You see a blank screen or the message No signal.
• Make sure the power light on the projector is green and not flashing, and the lens cover is removed.
• Make sure the cables are connected correctly. See the User’s Guide.
• You may need to change the image source. See “Switching Between
Image Sources.” (Also make sure the source device is turned on.)
The projector and the notebook don’t display the same image.
Windows ®
Press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labeled
CRT/LCD or have a key while pressing it. icon, and you may have to hold down the Fn
If that doesn’t work, open the Display utility in the Windows Control Panel
(in Windows Vista ® , right-click on the desktop and select Personalize).
Next, click Change display settings,
Display settings, or Settings and
Advanced or Advanced Settings.
Make sure the external monitor port is set as your primary display and/or enabled. See your computer’s documentation or online help for details.
Mac OS ® X
Select System Preferences, Display or Displays, and Detect Displays.
Then, if you’re using Mac OS X 10.6.x, click Show displays in menu bar. If you’re using a different version of Mac
OS X, select VGA Display or Color
LCD, Arrangement or Arrange, and
Mirror Displays.
Where To Get Help
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail
Epson.
Speak to a support representative
To use the Epson PrivateLine ®
Support service, call (800) 637-7661 and enter the PIN on the included
Epson PrivateLine Support card. This service is available 6 am
to 6 pm
, Pacific
Time, Monday through Friday, for the duration of your warranty period.
You may also speak with a projector support specialist by dialing one of the following numbers.
U.S.: (562) 276-4394, 6 am
to 6 pm
,
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 am
to 6 pm
,
Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Purchase supplies and accessories
You can purchase screens, ceiling mounts, and other accessories from an
Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Installing the Manuals
1. Insert the projector CD in your computer’s CD or DVD drive.
(Double-click the Epson installer icon, if necessary.)
2. Select your language, select your projector model, and follow the instructions on the screen to register.
Then click Install Projector User’s
Guides to install the manuals. For
Windows users, click Install Link
to Download EasyMP Monitor to install an icon on your computer’s desktop that you can use to access the EasyMP Monitor software.
3. To view the manuals, double-click the PowerLite 4100_4200W_4300
Guide or EasyMP Monitor
Operation Guide (for Windows users only) icon on your computer’s desktop.
Turning the Projector On
1. Turn on your computer or image source.
2. Remove the lens cover.
3. Press the power button. After the power light stays green, the projector is ready.
Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.
4. If your image does not appear, see
“Switching Between Image Sources” or “Troubleshooting.”
Switching Between Image
Sources
Press the Search button (remote control), one of the Source buttons
(remote control), or the Source
Search button (projector).
Adjusting Image Position
If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position.
Horizontal lens shift dial
Vertical lens shift dial
If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot.
Release the lever to lock the foot in position.
You can fine-tune the height or level the image by turning any of the projector’s adjustable feet. Use the horizontal lens shift dial to move your image left or right.
Focusing and Zooming
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce/enlarge the image.
Correcting Image Shape
• If your image looks like or , press the or button on the projector to correct it. You can also use the remote control to correct the image shape (see the User’s Guide).
• If your image looks like or , press the or button to correct it. You can also use the remote control to correct the image shape (see the User’s Guide).
• If your image is uneven on all sides, you can use Quick Corner ® to adjust the shape. See the User’s Guide.
Changing the Aspect Ratio
Press the Aspect button on the remote control to change the aspect ratio.
For images input through the
Computer1 port, select Normal to automatically resize the image.
Turning the Projector Off
Press the power button to turn the projector off. At the confirmation message, press the power button again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead.
With Epson’s Instant Off ® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done.
Troubleshooting
You see a blank screen or the message No signal.
• Make sure the power light on the projector is green and not flashing, and the lens cover is removed.
• Make sure the cables are connected correctly. See the User’s Guide.
• You may need to change the image source. See “Switching Between
Image Sources.” (Also make sure the source device is turned on.)
The projector and the notebook don’t display the same image.
Windows ®
Press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labeled
CRT/LCD or have a key while pressing it. icon, and you may have to hold down the Fn
If that doesn’t work, open the Display utility in the Windows Control Panel
(in Windows Vista ® , right-click on the desktop and select Personalize).
Next, click Change display settings,
Display settings, or Settings and
Advanced or Advanced Settings.
Make sure the external monitor port is set as your primary display and/or enabled. See your computer’s documentation or online help for details.
Mac OS ® X
Select System Preferences, Display or Displays, and Detect Displays.
Then, if you’re using Mac OS X 10.6.x, click Show displays in menu bar. If you’re using a different version of Mac
OS X, select VGA Display or Color
LCD, Arrangement or Arrange, and
Mirror Displays.
Where To Get Help
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail
Epson.
Speak to a support representative
To use the Epson PrivateLine ®
Support service, call (800) 637-7661 and enter the PIN on the included
Epson PrivateLine Support card. This service is available 6 am
to 6 pm
, Pacific
Time, Monday through Friday, for the duration of your warranty period.
You may also speak with a projector support specialist by dialing one of the following numbers.
U.S.: (562) 276-4394, 6 am
to 6 pm
,
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 am
to 6 pm
,
Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Purchase supplies and accessories
You can purchase screens, ceiling mounts, and other accessories from an
Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Remote Control Map
Turn the projector on and off
Select a source
Open projector menus
Navigate through menu settings; move pointer
Select menu settings
Change slides or pages in a presentation
(optional wireless mouse receiver required)
Temporarily turn off display
Automatically adjust computer image
Change the aspect ratio
Display on-screen help
Switch image sources
Remote control ID switch
Open menus assigned by user
Cancel current operation or return to previous menu
Activate screen pointer
Zoom in and out
Freeze the image
Select from 8 color modes
Use numeric keys to enter passwords, IP settings, etc.
Enter passwords
Replacement Parts
Product
Replacement lamp
PowerLite 4100
PowerLite 4200W/4300
Air filter
Product Number
V13H010L62
V13H010L63
V13H134A17
You can purchase replacement parts from an
Epson authorized reseller. See “Where To Get
Help” inside this card for more information.
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 8/10
CPD-28113
Printed in XXXXXX
*411953200*
*411953200*
PowerLite ® 4100/4200W/4300
Quick Reference
This Quick Reference card gives brief instructions on connecting your
PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD.
Remote Control Map
Turn the projector on and off
Select a source
Open projector menus
Navigate through menu settings; move pointer
Select menu settings
Change slides or pages in a presentation
(optional wireless mouse receiver required)
Temporarily turn off display
Automatically adjust computer image
Change the aspect ratio
Display on-screen help
Switch image sources
Remote control ID switch
Open menus assigned by user
Cancel current operation or return to previous menu
Activate screen pointer
Zoom in and out
Freeze the image
Select from 8 color modes
Use numeric keys to enter passwords, IP settings, etc.
Enter passwords
Replacement Parts
Product
Replacement lamp
PowerLite 4100
PowerLite 4200W/4300
Air filter
Product Number
V13H010L62
V13H010L63
V13H134A17
You can purchase replacement parts from an
Epson authorized reseller. See “Where To Get
Help” inside this card for more information.
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 8/10
CPD-28113
Printed in XXXXXX
*411953200*
*411953200*
PowerLite ® 4100/4200W/4300
Quick Reference
This Quick Reference card gives brief instructions on connecting your
PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement