advertisement
HDMMX1616-4K Modular Matrix
Switcher
User Manual
All Rights Reserved
Version: HDMMX88-4K_2015V2.5
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Preface
Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The functions described in this version are updated until August 2015. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details.
Trademarks
Product model, and logo are trademarks. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner. No part of this publication may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Contents
1.2.1. Modular Matrix Switcher signal card (changeable cards) ....................... 4
2.2.1. MOD-IN-DVI & MOD-OUT-DVI ............................................................... 6
2.2.2. MOD-IN-DVI & MOD-OUT-DVI ............................................................... 8
2.2.4. MOD-IN-SDI & MOD-OUT-SDI ............................................................. 10
2.2.5. MOD-IN-CAT6-4K & MOD-OUT-CAT6-4K ............................................ 11
2.2.6. MOD-IN-HDTV-4K & MOD-OUT-HDTV-4K ........................................... 12
2.2.7. MOD-IN-FIBER & MOD-OUT-FIBER .................................................... 13
2.2.8. AU88 Stereo Audio (MMX88A Only) ..................................................... 14
4.2.1. Connection of RS232 Communication Port .......................................... 17
4.2.2. RS232 Communication Commands ..................................................... 17
1
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
5.2.1. MOD-IN-DVI & MOD-OUT-DVI ............................................................. 30
5.2.2. MOD-IN-SDI & MOD-OUT-SDI ............................................................. 31
5.2.3. MOD-IN-HDTV-4K & MOD-OUT-HDTV-4K ........................................... 31
5.2.4. MOD-IN-VGA & MOD-OUT-VGA .......................................................... 32
5.2.6. MOD-IN-SDI & MOD-OUT-SDI ............................................................. 33
5.2.7. MOD-IN-CAT6-4K & MOD-OUT-CAT6-4K ............................................ 34
5.2.8. MOD-IN-HDTV-4K & MOD-OUT-HDTV-4K ........................................... 34
5.2.9. MOD-IN-FIBER & MOD-OUT-FIBER .................................................... 35
5.2.10. MOD-IN-CAT6-4K & MOD-OUT-CAT6-4K .......................................... 35
5.2.11. AU88 (Modular Matrix Switcher 16x16 (with Audio) Only)................... 36
2
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
1. Introduction
1.1. About The HDMMX1616-4K (with Audio)
The KanexPro HDMMX88A-4K is an sixteen input by sixteen output modular matrix switcher chassis with four input slots and four output slots; each modular input or output card supports up to four device connections. As an add-on to front panel control, the
HDMMX1616A-4K can be controlled via IR, RS232, or TCP/IP connections.
The optional modular input cards include the following connections: HDMI, DVI, VGA,
HDBaseT (with RS232 and bi-directional wide-band IR), Fiber Optic and analog video with digital scaling via HD15 (VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, S-video and composite video). The modular output cards include the following connections: HDMI, SDI, DVI, VGA, HDBaseT and Fiber Optic. Stereo audio embedding is supported on the HDMI input cards to allow analog audio to be inserted into the digital signal. Stereo audio can also be de-embedded using the HDMI or
HDBaseT output cards. Advanced EDID management restricts sources to output only stereo audio, while emulating the native video data from the attached displays. This system allows analog audio to be switched with the paired digital video, eliminating the requirement for an additional audio matrix switcher.
1.2. Features
▪ Customizable 16x16 modular switch serving various AV connections
▪ 4K UHD resolution via HDMI & HDBaseT
▪ Supported connections: VGA, SDI, DVI, HDMI, HDBaseT & Fiber optic
▪ High-bandwidth up to 10.2 Gbps
▪ Add I/O modular cards based on expandability
▪ Cross-point ultra-switching
▪ Advanced HDCP & EDID management
▪ Hot swappable design
▪ Clear illuminated buttons
▪ Control via IR, Ethernet & RS-232
▪ 10 global presets
▪ Front panel LCD for switching & status
▪ Front panel security lock
3
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
▪ 2U rack-mountable aluminum enclosure
▪ Dual-Internal power supply (100Volt~240Volt AC, 50/60Hz)
1.2.1. Modular Matrix Switcher signal card (changeable cards)
Modular Matrix Switcher 16x16 (with Audio) supports multiple signal cards as listed in the following charts:
Input Cards
Spec
Models
MOD-IN-HDTV-4K
MOD-IN-DVI
MOD-IN-VGA
MOD-IN-SDI
MOD-IN-FIBER
MOD-IN-CAT6-4K
Spec
Models
MOD-OUT-HDTV-
4K
MOD-OUT-DVI
Inputs
4
4
4
4 inputs&
LOOP
4
4
Outputs
4
Signal Format
HDMI& analog audio
DVI
VGA& analog audio
SDI
Optical Fiber
HDBT, RS232, Audio
Signal Format
HDMI& analog audio
DVI
Output Cards
MOD-OUT-VGA
MOD-OUT-SDI
4
4 VGA& Stereo audio
4 outputs&
LOOP
4
VGA, analog audio
SDI
MOD-OUT-FIBER
MOD-OUT-CAT6-
4K
4
Optical Fiber
HDBT, RS232,
Audio
1.4 Package List
1 x Modular Matrix Switcher 16x16 (with
Audio)
1 x Power Cord
1 x RS232 cable
4 x Plastic cushions
1 x User manual
Notes: Confirm all the accessories are included, if not, please contact with the dealers.
4
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
2. Panel Description
2.1. Modular Matrix Switcher 16x16 (with Audio)
2.1.1. Front Panel
No.
Figure 2- 1 Front Panel of Modular Matrix Switcher 16x16 (with Audio)
① IR
②
③
Name
Power indicator
LCD screen
IR sensor
Description
Illuminate red once powered on
Display real-time operation status
④
⑤
⑥
INPUTS
OUTPUTS
MENU
Back-lit buttons for input selection, ranges from 1~ 9, correspond to 1~16 sources on input signal cards (counting from left to right, top to bottom)
Back-lit buttons for output selection, ranges from 1~ 9, correspond to 1~16 displays on output signal cards (counting from left to right, top to bottom)
AV: Transfer AV signal from AV signal card& audio signal from audio card synchronously
VIDEO: Transfer AV signal from AV signal card only
AUDIO: Transfer audio signal from audio card only
ALL: Select all input/output channel
THROUGH: To transfer the signals directly to the corresponding output channels.
UNDO: Undo button, to resume to the status before the command just performed.
: Backspace button, to backspace the last press.
5
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
2.1.2. Rear Panel
Figure 2- 2 Rear Panel of Modular Matrix Switcher 16x16 (with Audio)
No.
①
Name
INPUTS Audio input slot
② OUTPUTS Audio output slot
③ INPUTS
Description
Input signal card slots, 2 in total, insert necessary input cards here
④ OUTPUTS
Output signal card slots, 2 in total, insert necessary output cards here
⑤ Power port
Connect with household alternating current power
Serial control port; connect with RS232 port of control device. ⑥ RS232
⑦
GND connector
⑧ TCP/IP
Used for system grounding
(Optional) Used for TCP/IP control port
2.2. Changeable Cards
Modular Matrix Switcher 16x16 (with Audio) support expansion through various changeable input/ output cards of different signals including DVI, HDMI, VGA, and twisted pair, SDI etc. Here is a brief introduction to the changeable cards.
2.2.1. MOD-IN-DVI & MOD-OUT-DVI
DVI signal card. (Please check the specification from 5.2.1)
It is fully compatible with HDMI1.3 and HDCP, but not supporting analogy signal.
It is embedded EDID management technology, supporting DDC.
MOD-IN-DVI: input card, maximum four input signal. Input signal can pass to output device through 4O-DV or other kinds of output cards.
6
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
MOD-OUT-DVI: output card, maximum four output signal, output signals from 4I-DV, or other kinds of input cards.
Pin Layout of the DVI-I connector (Dual-Link). (Female)
Pin Function Pin Function
1 T.M.D.S.Data2- 13 T.M.D.S.Data3+
2 T.M.D.S.Data2+ 14 +5V Power
3
T.M.D.S. Data
2/4 Shield
15
Ground (return for
+5V,
Hsync and Vsync)
4
T.M.D.S. Data
4-
5
T.M.D.S. Data
4+
6 DDC Clock
16
17
Hot Plug Detect
T.M.D.S. Data 0-
7 DDC Data
18 T.M.D.S. Data 0+
19
T.M.D.S. Data 0/5
Shield
8
Analog Vertical
Sync
20 T.M.D.S.Data5-
9 T.M.D.S.Data1- 21 T.M.D.S.Data5+
T.M.D.S. Clock
10 T.M.D.S.Data1+ 22
Shield
11
T.M.D.S.Data1/3
Shield
12 T.M.D.S.Data3-
C1 RED
C3
C5
Analog Blue
GND
Note: Pin C1~C5 are not used in 4I-DV & 4O-DV.
23
13
T.M.D. S. Clock +
C2 Analog Green
Horizontal Sync
C4
Analog
T.M.D.S.Data3+
7
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
2.2.2. MOD-IN-DVI & MOD-OUT-DVI
Seamless DVI signal card. (Please check the specification from 5.2.2)
It is fully compatible with HDMI1.3& HDCP, and supports seamless transmission for high-definition DVI, HDMI, VGA, AV, YPbPr signals. Signal format can be modified via
RS232 commands.
It boasts embedded EDID management (only for HDMI/ DVI signal), supporting DDC.
4I-DS: seamless input card, maximum four input signal. It can automatically identify the format of input signal. Input signal can pass to output device through 4O-DS, or other kinds of output cards.
4O-DS: seamless output card, maximum four output signal. Automatically recognize output signal (HDMI/ DVI), and output resolution is adjustable. Output signal can come from 4I-DS, or from other kinds of input cards. It supports off memory for resolution, signal format, HDCP compliant status.
Note:
1. When 4O-DS works with input cards except 4I-DS, to ensure reliable seamless output, adjust the input signals to any one of the following 5 resolutions: 1024x768,
1280x720, 1600x1200, 1920x1080, 1920x1200.
2. Before using 4O-DS, upgrade the front-board and backboard of MMX88A. Seek technical assistant from our technical supporters.
3. DVI interfaces on the signal card are same with the interfaces on 4I-DV& 4O-DV.
Pin C1~C5 are used in 4I-DS & 4O-DS.
When connecting to VGA, YPbPr or C-VIDEO signal, insert converting cables according to specific pin definitions (see the figures below):
DVI- C-VIDEO:
Pin
C1
Signal
Yellow
C5 GND
Other pins are unused.
8
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
DVI- YPbPr:
Pin Signal
C1 RED
Pin
C2
C3 BLUE C5
Other pins are unused.
Signal
GREEN
GND
DVI- VGA (female):
Pin
C1
C3
Signal
RED
GREEN
Pin Signal
C2 GND
C4 Horizontal Sync
Analog
8 Vertical Sync Analog
Other pins are unused.
.
MOD-OUT-VGA output card, maximum four VGA output signal and 4 stereo audio outputs, output video signal from 4I-VG, or other kinds of input cards, and output audio signal from the audio of the input signal.
6
7
8
Pin Signal
1 RED
2
3
4
5
GREEN
BLUE
ID2/RES
GND
RED_RTN 14
GREEN_RTN 15
BLUE_RTN
Pin Signal
9 KEY/PWR
10
11
12
13
GND
ID0/RES
ID1/SDA
HSync
VSync
ID3/SCL
9
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
When connecting to YPbPr or C-VIDEO signal, insert converting cables according to specific pin definitions (see the figures below):
VGA- YPbPr:
VGAC-VIDEO:
Pin
1
Signal
RED
Pin
6
2 GREEN 7
3 BLUE 8
Other pins are not used.
Signal
GND
GND
GND
Pin
1
7
Signal
RED
GND
Pin Signal
6 GND
8
Other pins are not used.
GND
2.2.3. MOD-IN-VGA
VGA signal card. (Please check the specification from 5.2.6)
Scale all inputs to 1080p or 1920x1200;
Input signal can be VGA (RGBHV), YPbPr, S-video, C-video or CVBS;
4 stereo audio inputs.
MOD-IN-VGA: input card, maximum four VGA inputs and four stereo audio inputs. Input signal can pass to output device through any kinds of output cards.
The VGA connector and source connection are same with the 4I-VG.
2.2.4. MOD-IN-SDI & MOD-OUT-SDI
SDI signal card. (Please check the specification from 5.2.7)
10
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
It is compatible with different SDI signal formats, including SD/HD/3G-SDI (adaptive)
Every port has loop output for local monitoring.
MOD-IN-SDI: input card, maximum four input signal. Input signal can pass to output device through MOD-OUT-SDI, or other kinds of output cards.
MOD-OUT-SDI: output card, maximum four-output signal, output signals from MOD-IN-
SDI, or other kinds of input cards.
The BNC connector is shown as the figure below.
Tip (+)
Sleeve ( )
BNC Connector
2.2.5. MOD-IN-CAT6-4K & MOD-OUT-CAT6-4K
4K Twisted pair card (Please check the specification from 5.2.12)
Support HDTV, compatible with HDBT 1.0, HDMI1.4a& HDCP1.4; Wide resolution range from 480p~ 4kx2k, 1080p 3D compliant; Extend HDBT signal up to 70m at 1080p or 40m at 4k; Bi-directional RS232 transmission on single cable; Audio source selectable via corresponding command; Auxiliary audio ports support stereo signal.
It also boasts embedded EDID management.
MOD-IN-CAT6-4K: input card, maximum input four HDBT signal. Input signal can pass to output device through MOD-OUT-CAT6-4K, or other kinds of output cards, need to work with HDBT transmitters.
Note: When matching with output cards that do not support 4kx2k, adjust the input
11
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio) resolution to 1080p to enable reliable output.
MOD-OUT-CAT6-4K: output card, maximum output four HDBT signal, output signals from MOD-IN-CAT6-4K, or other kinds of input cards, need to work with HDBT receivers.
How the indicators work:
Color
Yellow
Green
Definition
Power Indicator
Link Indicator
Status
Blink once powered on;
Turn off when there is no power.
Light when the port is connected with
CAT5e/6;
Turn off when there is no connection.
Pin layout of the HDBT connector:
Pin
1
2
3
4
5
6
7
8
Color orange white orange green white blue blue white green brown white brown
1st Group 4--5
2nd Group 1--2
3rd Group 3--6
4th Group 7--8
Notice: Cable connectors MUST be metal one, and the shielded layer of cable MUST be connected to the connector’s metal shell, to well share the grounding.
2.2.6. MOD-IN-HDTV-4K & MOD-OUT-HDTV-4K
4K HDMI signal card. (Please check the specification from 5.2.10)
Support HDMI 1.4a& HDCP 1.4 compliance; Compatible with DVI signal; Support highdefinition HDMI source up to 4kx2k, 1080p 3D compliance;
Provide auxiliary audio port as supplement to HDMI embedded audio, audio source selectable via command “AUDIO [X] I[Z].”, [X] stands for output port, [Z] stands for
12
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio) audio source (0 is for HDMI embedded audio, 1 is for analog audio)
It also boasts embedded EDID management.
MOD-IN-HDTV-4K: input card, maximum four input signal. Input signal can pass to output device through MOD-OUT-HDTV-4K, or other kinds of output cards.
Note: When matching with output cards that do not support 4kx2k, adjust the input resolution to 1080p to enable reliable output.
MOD-OUT-HDTV-4K: output card, maximum four output signal, output signals from
MOD-IN-HDTV-4K, or other kinds of input cards, HDCP compliant status settable via
RS232 command
The HDMI connector is same with 4I-HD& 4O-HD
’s.
2.2.7. MOD-IN-FIBER & MOD-OUT-FIBER
4K optical signal card. (Please check the specification from 5.2.11)
Work with single-mode/ multi-mode module to realize long-distance optical fiber transmission, support multi-mode transmission up to 300m and single mode transmission up to 1km.
High bandwidth: 10.2Gbps; Compliant with HDMI 1.4, capable to transmit 4K×2K&
1080P 3D (max) signals;
MOD-IN-FIBER: input card with indicators, maximum four input signal, and corresponding indicator illuminates green when there is input signal. Input signal can pass to output device through MOD-OUT-FIBER, or pass through other kinds of output cards.
MOD-OUT-FIBER: output card with indicators, maximum four output signal, output signals from MOD-IN-FIBER, or other kinds of input cards; corresponding indicator illuminates green when there is output signal.
13
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Note:
1. Use the MOD-IN-FIBER/ MOD-OUT-FIBER with optical fiber transmitter/ receiver.
2. Multi-mode transmission may include the following cases:
Single-mode optical fiber module& Multi-mode optical fiber cable
Multi-mode optical fiber module& Multi-mode optical fiber cable
3. Before using MOD-IN-FIBER & MOD-OUT-FIBER, upgrade the front-board and backboard of MMX88A. Seek technical assistant from our technical supporters.
2.2.8. AU88 Stereo Audio (MMX88A Only)
16x16 stereo audio cross point switching card. (Please check the specification from
5.2.13)
It supports the balanced/unbalanced audio, by different connection.
It is not a hot plug card, fixed on the chassis.
Balanced Audio Connection:
Unbalanced Audio Connection:
14
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
3. System Connection
3.1. Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and safe.
3) All devices should be connected before power on.
3.2. Connection Diagram
Figure 3- 1 System Diagram
Note: All the input/output signal cards don ’t support hot-plug while input& output ports on the cards support hot-plug.
3.3. Application
Modular Matrix Switcher series has a good application in various occasions, such as radio & television, multi-media meeting room, big screen displaying, television education and command & control center etc.
15
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
4. Control Operations
4.1. Front Panel Button control
Users can control Modular Matrix Switcher 16x16 (with Audio) rapidly and directly with its front panel buttons. Here is a brief operation guide to front panel buttons.
Format:
“Input Channel” + “Switch Mode” +“Output Channel”
Note:
1)
“Switch Mode”:
AV: Transfer AV signal from AV signal card& audio signal from audio card synchronously
Video: Transfer AV signal from AV signal card
Audio: Transfer audio signal from audio card
2)
“Input Channel”: Fill with the number of input channel to be controlled,
3)
“Output Channel”: Fill with the number of output channels to be controlled. Press
“All” to select all the outputs.
4) The input/output channels on the rear panel are counting from left to right, top to bottom.
5) The input delay time between two numbers of every input& output channel must be less than 5 seconds; otherwise the operation will be cancelled.
Example:
1. To transfer input 1 to output 1, press input “1”, output “1”.
2. To transfer signals from input 1 to all output channels, press buttons in this order:
“1”, “All”.
Functional Buttons:
UNDO button: return to the previous status
Example: Input 6 is connecting with output 6, press input “6” + “AV”+ output 4 to change the connection. Press
“Undo” to enable input 6 to reconnect with output 6.
Button: If you press buttons “1”, “AV”, “2”, “” in order, then “2” will be canceled.
THROUGH button: get straight I/O connection, e.g. input 1-> output 1, input 2-> output
2.
Press “Input Channel “+”Through”
Example: If you press buttons “ALL”, “THROUGH” in order, then the result will be like input 1 output 1, input 2output 2, input 3output 3
… input 8output 8.
16
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
4.2. RS232 Control
4.2.1. Connection of RS232 Communication Port
Except the front control panel and IR remote, Modular Matrix Switcher 16x16 (with
Audio) can be controlled by far-end control system or through the Ethernet control via the RS-232 communication port.
This RS-232 communication port is a female 9- D connector. The definition of its pin layout is shown in the table below.
4
5
6
7
No.
1
2
3
8
9
Pin
N/u
Tx
Rx
N/u
Gnd
N/u
N/u
N/u
N/u
Function
Unused
Transmit
Receive
Unused
Ground
Unused
Unused
Unused
Unused
When Modular Matrix Switcher 16x16 (with Audio) connects to the RS232 port of a computer with control software, users can control it by that computer. To control the switcher, users need to use RS232 control software.
4.2.2. RS232 Communication Commands
With this command system, users are able to control and operate the Modular Matrix
Switcher 16x16 (with Audio) with RS232 software remotely.
Note:
1. Please disconnect all the twisted pairs before sending command
EDIDUpgrade[X].
2. In the commands, “[”and “]” are symbols for easy reading and do not need to be typed in actual operation.
3. Please remember to end the commands with the ending symb ols “.” or “;”.
4. Type the command carefully, it is case-sensitive.
5. Commands pertaining to EDID only available for signal cards that support EDID management.
6. Modular Matrix Switcher 16x16 (with Audio) boasts 6 in-built EDID data; the chart below illustrates the detailed information:
17
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
No. Detailed Information
1 1080p 2D 5.1CH
2 1080p 2D 2.0CH
3 720p 2D 5.1CH
4 720p 2D 2.0CH
5 4kx2k 2D 5.1CH
6 4kx2k 2D 2.0CH
Update in-built EDID data by sending command UpgradeIntEDID[x]..
18
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Communication protocol: Baud rate: 9600; Data bit: 8; Stop bit: 1; Parity bit: none.
Command
/*Type;
/%Lock;
/%Unlock;
/^Version;
/:MessageOff;
/:MessageOn;
Undo.
Demo.
[x]All.
All#.
All$.
[x]#.
[x]$.
All@.
[x]@.
[x1]V[x2].
[x1]A[x2].
[x1]B[x2].
Status[x].
Status.
Save[Y].
Description
Inquire the models information.
Lock front panel buttons.
Unlock front panel buttons.
Inquire the firmware version.
Turn off the feedback command from the com port. It will only show “switcher
OK”.
Turn on the feedback command from the com port.
Cancel the previous operation.
Feedback
Switch to the “demo” mode, 1->1, 2->2,
3-
>3 … and so on.
Enabled The
Message Return.
Undo
Demo Mode
AV: 01->001
… …
Transfer signals from the input channel
[x] to all output channels
Transfer all input signals to the corresponding output channels respectively.
Switch off all the output channels.
Transfer signals from the input channel
[x] to the output channel [x].
Switch off the output channel [x].
Switch on all the output.
Switch on output [x].
Transfer the video signals from input
[x1] to output [x2].
Transfer the audio signals from the input channel [x1] to the output channel
[x2].
Transfer audio& video signal from input
[x1] to output [x2].
Inquire the input channel to the output channel [x].
Inquire the input channel to the output channels one by one.
01 To All
All Through.
All Closed.
01 Through.
AV: 01 Closed.
All Open.
01 Open.
V: 01->001
A: 01->001
AV: 01->001
V: 01->001
A: 01->001
V: 01->001
A: 01->001
… …
Save the present operation to the preset command [Y]. [Y] ranges from 0
MODULAR88A
System Locked!
System Unlock!
Vx.x.x
Closed The
Message Return.
Save To F8
19
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Recall[Y].
Clear[Y].
PWON.
PWOFF.
HDCPON.
HDCPOFF.
/V00.
UpgradeIntEDID[x].
EDIDUpgrade[x].
EDID/[x]/[y].
EDIDG[x].
EDIDMInit.
EDIDM[X]B[Y].
USER/[Y]/[X]:*****;
0911%. to 9.
Recall the preset command [Y].
Clear the preset command [Y].
Work normally.
Enter in standby mode.
Turn on the HDCP output.
Turn off the HDCP output.
Inquire the version of backboard software.
Upgrade built-in EDID data. Supports 6 types of EDID data (see Note 6). When the switcher gets the command, it will show a message to send EDID file (.bin file).
Upgrade EDID data of input ports
When the switcher gets the command, it will show a message to send EDID file (.bin file). Operations will be canceled after 10 seconds.
Set the EDID data of input port [x] to built-in EDID data of type [y].
[y]= 1~6.
Get EDID data from output [x] and display the data on serial port control software.
Reset factory default EDID for every input channel.
Manually EDID switching. Enable input
[Y] to learn the EDID data of output[X].
If there is problem learning the EDID data, it will automatically set the default
EDID data for input [Y].
Custom command for signal cards,
[Y]=I/O; [X]= port number; *****: Userdefinable command, e.g. 0623%
Restore factory default.
All I/O connection will be restored to straight through: 1->1, 2->2,
…; saved
Recall From F8
V: 01->001
A: 01->001
… …
Clear F8
PWON
PWOFF
HDCPON
HDCPOFF
Vx.x.x
EDIDMInit
EDIDM2B1
20
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
USER/I/[x]:02xx%; operation status will remain the same.
MOD-IN-HDMI
Set the brightness of input [x] to xx, xx=00~99
USER/I/[x]:03xx%;
Set the contrast of input [x] to xx, xx=00~99
USER/I/[x]:04xx%;
Set the saturation of input [x] to xx, xx=00~99
Set the sharpness of input [x] to xx,
USER/I/[x]:05xx%; xx=00~99
USER/I/[x]:0607%; Set picture ’s color temperature
USER/I/[x]:0608%; Configure image scale
USER/I/[x]:0614%; Configure picture mode
USER/I/[x]:0617%; Restore input [x] to factory default.
USER/I/[x]:0619%;
Set the resolution of input [x] to
1360x768, HD
USER/I/[x]:0626%;
USER/I/[x]:0627%;
USER/I/[x]:0628%;
Set the resolution of input [x] to
1024x768, XGA
Set the resolution of input [x] to
1280x720, 720P
Set the resolution of input [x] to
1280x800, WXGA
USER/I/[x]:0629%;
USER/I/[x]:0620%;
Set the resolution of input [x] to
1920x1080, 1080P
Set the resolution of input [x] to
1920x1200, WUXGA
USER/I/[x]:0621%;
Set the resolution of input [x] to
1600x1200, UXGA
USER/I/[x]:0698%; Software update
Set the output signal of input [x] to
USER/I/[x]:0686%;
HDMI
USER/I/[x]:0711%;
Select HDMI embedded audio as audio source
USER/I/[x]:0712%; Select analog audio as audio source
MOD-OUT-HDMI
USER/O/[x]:0804%;
USER/O/[x]:0813%;
USER/O/[x]:0824%;
Set the resolution of output [x] to
1280x720P @60Hz
Set the resolution of output [x] to
1280x1080P @60Hz
Set the resolution of output [x] to
1024x768 @60Hz
02xx%
03xx%
04xx%
05xx%
0607%
0608%
0614%
0617%
0619%
0626%
0627%
0628%
0629%
0620%
0621%
0698%
0686%
0711%
0712%
Resolution
Out03 1280x720P
Resolution
Out03 1920x1080P
Resolution
Out03 1024x768
21
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
USER/O/[x]:0826%;
USER/O/[x]:0837%;
Set the resolution of output [x] to
1280x1024 @60Hz
Set the resolution of output [x] to
1920x1200 @60Hz
Resolution
Out03 1280x1024
Resolution
Out03 1920x1200
USER/O/[x]:0617%; Restore output [x] to factory default.
GetResolution[x]. Capture output resolution of output [x]
0617%
USER/O/[x]:0110%; Enable analog audio output
USER/O/[x]:0111%; Disable analog audio output
0110%
0111%
MOD-IN-VGA
USER/I/[x]:0648%; Switch on audio of input [x]
USER/I/[x]:0649%; Switch off audio of input [x]
USER/I/[x]:0684%; Set the color space to YCBCR
0648%
0649%
0684%
0685%
0686%
0687%
USER/I/[x]:0685%; Set the color space to RGB
USER/I/[x]:0686%; Set the input signal to HDMI
USER/I/[x]:0687%; Set the input signal to DVI
Set the signal of input channel [x] to
USER/I/[x]:0622%;
VGA.
USER/I/[x]:0623%;
Set the signal of input channel [x] to
YCBCR.
USER/I/[x]:0624%;
USER/I/[x]:0625%;
USER/I/[x]:0626%;
USER/I/[x]:0627%;
USER/I/[x]:0628%;
Set the signal of input channel [x] to
SVIDEO.
Set the signal of input channel [x] to
CVIDEO.
Set the resolution of input [x] to
1024x768@60Hz.
Set the resolution of input [x] to
1280X720@60Hz.
Set the resolution of input [x] to
1280X800@60Hz.
0622%
0623%
0624%
0625%
0626%
0627%
0628%
USER/I/[x]:0619%;
USER/I/[x]:0621%;
Set the resolution of input [x] to
1360X768@60Hz.
Set the resolution of input [x] to
1600X1200@60Hz.
USER/I/[x]:0629%;
USER/I/[x]:0620%;
Set the resolution of input [x] to
1920X1080@60Hz.
Set the resolution of input [x] to
1920X1200@60Hz.
USER/I/[x]:0617%; Restore input [x] to factory default.
USER/I/[x]:0606%; Auto-adjust VGA signal
USER/I/[x]:0698%; Update software
MOD-IN-VGA
0619%
0621%
0629%
0620%
0617%
0606%
0698%
22
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
USER/I/[x]:0622%;
USER/I/[x]:0623%;
USER/I/[x]:0624%;
USER/I/[x]:0625%;
USER/I/[x]:0626%;
USER/I/[x]:0627%;
Set the signal of input channel [x] to
VGA.
Set the signal of input channel [x] to
YCBCR.
Set the signal of input channel [x] to
SVIDEO.
Set the signal of input channel [x] to
CVIDEO.
Set the resolution of input [x] to
1024x768@60Hz.
Set the resolution of input [x] to
1280X720@60Hz.
USER/I/[x]:0628%;
USER/I/[x]:0629%;
Set the resolution of input [x] to
1280X800@60Hz.
Set the resolution of input [x] to
1920X1080@60Hz.
USER/I/[x]:0621%;
Set the resolution of input [x] to
1600x1200, UXGA
USER/I/[x]:0698%; Software update
USER/I/[x]:02xx%;
USER/I/[x]:03xx%;
USER/I/[x]:04xx%;
USER/I/[x]:0627%;
USER/I/[x]:0628%;
MOD-INSDI
Set the brightness of input [x] to xx, xx=00~99
Set the contrast of input [x] to xx, xx=00~99
Set the saturation of input [x] to xx, xx=00~99
USER/I/[x]:05xx%;
Set the sharpness of input [x] to xx, xx=00~99
USER/I/[x]:0606%; Auto-adjust VGA input signal
USER/I/[x]:0607%; Set picture
’s color temperature
USER/I/[x]:0608%; Configure image scale
USER/I/[x]:0614%; Configure picture mode
USER/I/[x]:0617%; Restore input [x] to factory default.
USER/I/[x]:0619%;
USER/I/[x]:0626%;
Set the resolution of input [x] to
1360x768, HD
Set the resolution of input [x] to
1024x768, XGA
Set the resolution of input [x] to
1280x720, 720P
Set the resolution of input [x] to
1280x800, WXGA
0622%
0623%
0624%
0625%
0626%
0627%
0628%
0629%
0621%
0698%
02xx%
03xx%
04xx%
05xx%
0606%
0607%
0608%
0614%
0617%
0619%
0626%
0627%
0628%
23
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
USER/O/[x]:0201%;
USER/O/[x]:0202%;
USER/O/[x]:0203%;
USER/O/[x]:0804%;
USER/O/[x]:0813%;
USER/O/[x]:0824%;
USER/O/[x]:0826%;
USER/O/[x]:0837%;
GetResolution[x].
GetVGAPortMode[x
].
MOD-OUT-SDI
Set the input source of output [x] to
YPbPr
Set the input source of output [x] to
VGA
Set the input source of output [x] to C-
VIDEO
Set the resolution of output [x] to
1280x720P @60Hz
Set the resolution of output [x] to
1280x1080P @60Hz
Set the resolution of output [x] to
1024x768 @60Hz
Set the resolution of output [x] to
1280x1024 @60Hz
0201%
0202%
0203%
Resolution
Out03 1280x720P
Resolution
Out03 1920x1080P
Resolution
Out03 1024x768
Resolution
Out03 1280x1024
Set the resolution of output [x] to
1920x1200 @60Hz
Capture output resolution of output [x]
Resolution
Out03 1920x1200
Inquire the output status of VGA port
[x]
0617% USER/O/[x]:0617%; Restore output [x] to factory default.
MOD-IN-CAT6-4K
Select audio source for input [X]
AUDIO[X]I[Z].
[X] is port number; [Z] stands for audio source, can be 0 (embedded HDMI audio) or 1 (analog audio)
AUDIO1I0.
Examples:
1、 Transfer signals from an input channel to all output channels: [x]All.
Example: Send
“3All.” to transfer signals from the input 3 to all output channels.
2、 Transfer all input signals to corresponding output channels respectively: All#.
Example: If this command is carried out, the status of matrix will be: 1->1, 2->2, 3->3,
4>4…… 8->8.
3、 Switch off all the output channels: All$.
Example: After running this command, there will be no signals on all the outputs.
4、 Switch off the detail feedback command from the COM port: /:MessageOff;
But, it will leave t he “switch OK” as the feedback, when you switch the matrix.
5、 Switch on the detail feedback command from the COM port: /:MessageOn;
24
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
It will show the detail switch information when it switch. Example: when switch 1->2, it will feedback “AV01 to 02”.
6、 Transfer signals from an input channel to corresponding output channel: [x]#.
Example: “5#.” to transfer signals from the input 5 to the output 5.
7、Switch off an output channel: [x]$.
Example: “5$.” to switch off the output 5.
8、Switch signal: [x1] B[x2].
Exam ple: “1B2,3,5.” to transfer signal from the input 1 to the output No. 2,3,5.
9、Inquire the input channel to the output channel [x]: Status[x].
Example: Send
“Status2.” to inquire the input channel to the output 2.
10、Inquire the input channel to the output channels one by one: Status.
Example: “Status.” to inquire the input channel to the output channels one by one.
11、Save the present operation to the preset command [Y]: Save[Y].
Example: “Save7.” to save the present operation to the preset command No.7.
12、Recall the preset command [Y]: Recall[Y].
Example: “Recall5.” to recall the preset command No.5.
13、Clear the preset command [Y]: Clear[Y].
Example: “Clear5.” to clear the preset command No.5.
14、EDID management command:. EDIDM[X]B[Y].
Example: “EDIDM5B3.” to enable input 3 to learn the EDID data of output 5.
15、Command for signal cards: USER/[Y]/[X]*****.
Example: “USER/I/7:0623%;” to set the input 7 to support YPbPr signal, the card is plugged in the second input slot of the matrix.
Note: If there is any empty input card or output card, and send the command
“ALL#.” It will be taken and the result is as 1->1, 2->2, 3->3
…, but actually there is no input/output signal at this card.
25
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
4.3. TCP/IP Control (Optional)
4.3.1. Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
4001. IP & Gateway can be changed as you need, Serial Port cannot be changed.
Controlled by Single PC
Connect a computer to the TCP/IP port of the Modular Matrix Switcher 16x16 (with
Audio), and set its network segment to the same as the default IP of the Modular Matrix
Switcher 16x16 (with Audio) (192.168.0.178).
Same network segment as the switcher
Controlled by PC(s) in LAN
The Modular Matrix Switcher 16x16 (with Audio) can be connected with a router to make up a LAN with the PC(s), this make it able to be controlled in a LAN. When control, just make sure the Modular Matrix Switcher 16x16 (with Audio)
’s network segment is the same with the router. Please connect as the following figure for LAN control.
26
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Step1. Connect the TCP/IP port of the Modular Matrix Switcher 16x16 (with Audio) to
Ethernet port of PC with twisted pair.
Step2. Set the PC
’s network segment to the same as the Modular Matrix Switcher
16x16 (with Audio). Do please remember the PC
’s original network segment.
Step3. Set the Modular Matrix Switcher 16x16 (with Audio)
’s network segment to the same as the router.
Step4. Set the PC ’s network segment to the original one.
Step5. Connect the Modular Matrix Switcher 16x16 (with Audio) and PC(s) to the router. In the same LAN, each PC is able to control the Modular Matrix
Switcher 16x16 (with Audio) asynchronously.
Then it
’s able to control the device via a TCP/IP communication software.
4.3.2. Control Modular Matrix Switcher 16x16 (with Audio) via TCP/IP communication software
(Exampled by TCPUDP software)
1) Connect a computer and Modular Matrix Switcher 16x16 (with Audio) to the same network. Open the TCPUDP software (or any other TCP/IP communication software) and create a connection, enter the IP address and port of Modular Matrix
Switcher 16x16 (with Audio) (default IP: 192.168.0.178, port:4001):
27
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
2) After connect successfully, we can enter commands to control the Modular Matrix
Switcher 16x16 (with Audio), as below:
Enter your command here.
Commands are the same with RS232 commands listed in 4.3.2 RS232
Communication Commands
Here you will receive the feedback when a command is sent.
4.3.3. TCP/IP Configuration
Type the designed website 192.168.0.178:100 in your browser. Enter correct username and password to log in the WebServer:
Username: admin; Password: admin
Here is the main configuration interface of the WebServer:
28
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
In this interface, you can:
Change website display language
Modify network settings: Go to Internet Settings -> WAN
Upgrade TCP/IP module: Go to Administration -> Upload Program -> Select program file -> Start upgrading
Reboot the device after upgrading.
29
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
5. Specification
5.1. Main Unit
Control parts
Serial control port
Installation
RS232, 9- female D connector
Rack Mountable
Configurations
Front panel control
2 = TX, 3 = RX, 5 =
GND
Buttons
Options
General
TCP/IP control
Power Supply
Temperature
Dimension
(W*H*D)
IN-DVI
Input
Input
Connector
Input Level
Input
Impedance
General
100VAC ~ 240VAC,
50/60Hz
-10 ~ +40℃
483 x 88 x 320mm
(2U high)
5.2. Changeable Cards
5.2.1. MOD-IN-DVI & MOD-OUT-DVI
4 DVI
Female DB24+5/HDMI
T.M.D.S. 2.9V~3.3V
75Ω
Gain
Video Signal
Max Timedelay
EDID and
DDC
HDCP
Power
Consumption
Humidity
Weight
60W (Max)
10% ~ 90%
3Kg
OT-DVI
Output 4 DVI
Output
Connector
Female DB24+5/HDMI output Level T.M.D.S. 2.9V~3.3V
Output
75Ω
Impedance
0 dB
DVI 1.0/HDMI 1.3 full digital T.M.D.S signal
Bandwidth
Switching
Speed
340 MHz (10.2
200ns (Max.)
Gbps/s)
5nS (±1nS) Crosstalk <-50dB@5MHz
Supports Extended Display Identification Data (EDID) and Display
Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered
Compliant with HDCP using DVI and HDMI 1.3 standards
30
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
5.2.2. MOD-IN-SDI & MOD-OUT-SDI
MOD-IN-SDI
Input
Input
Connector
4 SDI
Female DB24+5/HDMI
T.M.D.S. 2.9V~3.3V Input Level
Input
Impedance
General
Gain
75Ω
Video Signal
0 dB
DVI, HDMI,VGA,C-
VIDEO, YPbPr
Max Timedelay
EDID and
DDC
HDCP
5nS (±1nS)
MOD-OUT-SDI
Output
Output
Connector
Output
Level
Output
Impedance
Bandwidth
Switching
Speed
Crosstalk
4 SDI
Female DB24+5/HDMI
T.M.D.S. 2.9V~3.3V
75Ω
340 MHz (10.2 Gbps/s)
200ns (Max.)
<-50dB@5MHz
Supports Extended Display Identification Data (EDID) and Display
Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered
Compliant with HDCP using DVI and HDMI 1.3 standards
5.2.3. MOD-IN-HDTV-4K & MOD-OUT-HDTV-4K
MOD-IN-HDTV-4K
Input 4 HDMI
Input
Connector
Input Level
Female HDMI
T.M.D.S. 2.9V~3.3V
Input
Impedance
General
75Ω
Gain 0 dB
Video Signal
DVI 1.0/HDMI 1.3 full digital T.M.D.S signal
Switching
Speed
EDID and
DDC
HDCP
200ns (Max.)
MOD-HDTV-4K
Output
Output
Connector
Output Level
Output
Impedance
Bandwidth
Max Timedelay
Crosstalk
4 HDMI
Female HDMI
T.M.D.S. 2.9V~3.3V
75Ω
6.75 Gbps
5nS (±1nS)
<-50dB@5MHz
Supports Extended Display Identification Data (EDID) and Display
Data Channel (DDC) data
Compliant with HDCP
31
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
5.2.4. MOD-IN-VGA & MOD-OUT-VGA
MOD-IN-VGA
Input
Input
Connector
Input Level
Input
Impedance
4 VGA
Female 15 pin HD
0.5 ~ 2.0Vp-p
75Ω
Video Signal
VGA (RGBHV), YPbPr,
S-video, C-video&
CVBS.
General
Gain
Switching
Speed
0 dB
200ns (Max.)
MOD-OUT-VGA
Output 4 VGA
Output
Connector
Output Level
Output
Impedance
Female 15 pin HD
0.5 ~ 2.0Vp-p
75Ω
Video Signal
Bandwidth
Crosstalk
VGA
350MHz (-3dB)
<-50dB@5MHz
32
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
5.2.5. MOD-IN-VGA
Video
Input
Input
Connector
Input Level
4 VGA
Female 15 pin HD
0.5 ~ 2.0Vp-p
Audio
Input
Input
Connector
CMRR
4 Stereo Audio
3-pin Pluggable
Terminal Block
>90dB @20Hz ~
20KHz
Input
Impedance
General
75Ω
Input
Impedance
>10KΩ
Gain 0 dB Bandwidth
YPbPr:170MHz;
C-video:150MHz;
VGA:170MHz
Video Signal VGA (RGBHV), YPbPr, S-video, C-video& CVBS
Switching
Speed
200ns (Max.) Crosstalk <-50dB@5MHz
5.2.6. MOD-IN-SDI & MOD-OUT-SDI
MOD-IN-SDI
Input
Input
Connector
Input Level
Input
Impedance
General
4 SDI
Female BNC
0.8Vp-p ± 10%
75Ω
MOD-OUT-SDI
Output
Output
Connector output Level
Output
Impedance
4 SDI
Female BNC
0.8Vp-p ± 10%
75Ω
Gain Unity
Maximum
Data Rate
4.95Gbps
Transmission
Distance
Input Return
Loss
Video
Standard
300M (Max.)
<-14 dB @ 1 MHz ~ 1.5
GHz
SMPTE 292M, SMPTE
259M, SMPTE 424M,
ITU-RBT.601, ITU-
RBT.1120
Audio Bits per Sample
Switching
Speed
200ns (Max.)
Data rate Lock
Input Return
Loss
Data Type
18 bits per channel, 2 channels (L, R)
Crosstalk
Auto
<-14 dB @ 1 MHz ~
1.5 GHz
8bit, 10bit, 12bit
<-50dB@5MHz
33
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
5.2.7. MOD-IN-CAT6-4K & MOD-OUT-CAT6-4K
MOD-IN-CAT6-4K
Input 4 RJ45
Input
Connector
Female RJ45
Input
Impedance
Video General
75Ω
Transmission
Distance
Resolution range
1080p≤70M
SNR
HDMI
Standard
MOD-OUT-CAT6-4K
Output
Output
Connector
Output
Impedance
Bandwidth
4 RJ45
Female RJ45
75Ω
6.75Gbps
800x600 ~ 1920x1200 Transmission
Distance
>70dB@ 100MHz-
100M
Return Loss
70M(Max)
<-30dB@ 5KHz
Support HDMI1.3 and
HDCP
Differential
Phase Error
±10° @
135MHz_100M
5.2.8. MOD-IN-HDTV-4K & MOD-OUT-HDTV-4K
MOD-IN-HDTV-4K
Video Input
Input 4 HDMI
Input Connector
Min.～Max.
Level
Female HDMI
T.M.D.S. 2.9V~3.3V
Input Impedance 100 Ω (Differential)
Audio Input
Input
Input
Connector
Input
Impedance
Frequency
Response
MOD-OUT-HDTV-4K
Video Output
Output
Output
Connector
4 HDMI
Female HDMI
Min.～Max.
Level
Output
Impedance
General
T.M.D.S. 2.9V~3.3V
100
Ω (Differential)
Audio Output
Output
Output
Connector
Output
Impedance
Frequency
Response
Gain 0dB
Max
Resolution
4 Analog
3.5mm pluggable terminal block
75Ω
20Hz～20K Hz
4 Stereo
3.5mm Stereo audio connector
75Ω
20Hz～20K Hz
4Kx2K
34
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Transmission
Distance
Work
Temperature
1080P
4Kx2K
≤
0~50℃
70m
≤ 40m
Switching
Speed
Reference
Humility
200ns (Max.)
10%～90%
SNR
EDID& HDCP
Management
>70dB@ 100MHz-
100M
Return Loss <-30dB@ 5KHz
Supported Audio
Format
Embedded HDMI audio: PCM, Dobly Digital, DTS, DTS-HD
Analog audio: PCM
HDMI Standard Support HDMI1.4& DVI1.0
Compliant with HDCP 1.4; Support manual EDID management
5.2.9. MOD-IN-FIBER & MOD-OUT-FIBER
MOD-ON-FIBER
Input
Input
Connector
4 Fiber Optical
SPF Fiber Optical
Connector
Fiber Type
Multi-mode, Single mode
General
MOD-OUT-FIBER
Output
Output
Connector
Fiber Type
4 Fiber Optical
SPF Fiber Optical
Connector
Multi-mode, Single mode
Data Rate 10.2 Gbps Color Depth
8bit, 10bit, 12bit,
16bit
Work
Temperature
0～55℃
Optical Fiber Mode
Connector LC connector
Resolution
Transmission
Distance
Data Rate
Reference
Humility
10%～90%
Up to 4Kx2K
1km (Single mode transmission, using Single Mode Optical
Module and OM3 Single Mode Fiber Cable)
300m (Multi-mode transmission, using Single/ Multi mode
Optical Module and OM3 Multi-Mode Fiber Cable)
10.2Gbps/s
5.2.10. MOD-IN-CAT6-4K & MOD-OUT-CAT6-4K
MOD-IN-CAT6-4K
Video Input
Input 4 HDBT
Input
Connector
4 Female RJ45 (with dual-color indicator)
Audio Input
Input
Input
Connector
4 Stereo
3.5mm Stereo audio connector
35
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Min.～Max.
Level
T.M.D.S 2.9V～3.3V
Input
Impedance
100
Ω (Differential)
MOD-OUT-CAT6-4K
Video Output
Output
Output
Connector
Min.～Max.
Level
Output
Impedance
Control Part
4 HDBT
4 Female RJ45 (with dual-color indicator)
T.M.D.S 2.9V～3.3V
100 Ω (Differential)
Control
Signal
4 RS232
Input
Impedance
Frequency
Response
Audio Output
Output
Output
Connector
Output
Impedance
Frequency
Response
75Ω
20Hz～20K Hz
4 Stereo
3.5mm Stereo audio connector
75Ω
20Hz～20K Hz
Control
Connector
3-pin pluggable terminal block
Protocol
General
Gain
Max
Resolution
Transmission
Distance
Work
Temperature
Supported
Audio Format
HDMI
Standard
EDID& HDCP
Management
TCP/IP
0dB
4Kx2K
1080P
4Kx2K
≤
0~50℃
70m
≤ 40m
Switching
Speed
Reference
Humility
200ns (Max.)
10%～90%
Embedded HDMI audio: PCM, Dobly Digital, DTS, DTS-HD
Analog audio: PCM
Support HDMI1.4a
Bandwidth
Crosstalk
10.2Gbps
<-50dB@5MHz
Compliant with HDCP 1.4; Support manual EDID management
5.2.11. AU88 (Modular Matrix Switcher 16x16 (with Audio) Only)
Input
Input
Input
Connector
Input
Impedance
General
8 stereo
5-pin pluggable terminal block
>10KΩ
Output
Output
Output
Connector
Output
Impedance
8 stereo
5-pin pluggable terminal block
50Ω
36
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Frequency
Response
Stereo
Channel
Separation
20Hz~20KHz, ±0.5dB
>80dB@1KHz
CMRR
THD + Noise
>90dB@20Hz~20KH z
1% @ 1 KHz, 0.3%
@ 20 KHz at nominal level
37
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
6. Troubleshooting & Maintenance
Problems Causes
Bad quality of the connecting cable
Output image with ghost
Impropriate image setting of the displayer
Output image with color losing or no video signal output
Fail connection
No signal at the input / output end
Solutions
Try another high quality cable
Adjust corresponding image settings
Reconnect the displayer and the matrix
Check with oscilloscope or multimeter if there is any signal at the input/ output end.
No output image when switching
Fail or loose connection
Make sure the connection is good
The switcher is broken
Send it to authorized dealer for repairing.
IR remote does not work
Run out of battery
IR remote is broken
Change for another battery
Send it to authorized dealer for repairing.
POWER indicator doesn’t work or no respond to any operation
Fail connection of power cord.
EDID management does not work normally
Make sure the power cord connection is good.
The HDMI cable is broken at the output end.
Change for another HDMI cable which is in good working condition.
There is a blank screen on the display when switching
The display does not support the resolution of the video source.
Switch again.
Manage the EDID data manually to make the resolution of the video source automatically compliant with the output resolution.
38
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
Static becomes stronger when connecting the video connectors
Cannot control the device by control device (e.g. a
PC) through RS232 port
Bad grounding
Wrong RS232 communication parameters
Broken RS232 port
Check the grounding and make sure it is connected well.
Type in correct RS232 communication parameters.
Send it to authorized dealer for checking.
Cannot control the device by front panel buttons while can control it through RS232 port
Cannot control the device by RS232 / IR remote / front panel buttons
The front panel buttons are locked
The device has already been broken.
Send command 50605% to unlock the front panel buttons.
Send it to authorized dealer for repairing.
If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.
39
KanexPro HDMMX1616-4K Series Modular Matrix Switcher (with Audio)
7. After-sales Service
If there appear some problems when running Modular Matrix Switcher 16x16 (with
Audio), please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
1) Product Limited Warranty: We warrant that our products will be free from defects in materials and workmanship for three years, which starts from the first day the product leaves warehouse (check the SN mark on the product).
Proof of purchase in the form of a bill of sale or receipted invoice must be presented to obtain warranty service.
2) What the warranty does not cover (servicing available for a fee):
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear
Use of supplies or parts not meeting our specifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized
Any other causes which does not relate to a product defect
Delivery, installation or labor charges for installation or setup of the product
3) Technical Support: Email to our after-sales department or make a call, please inform us the following information about your cases.
Product version and name.
Detailed failure situations.
The formation of the cases.
Remarks: For any more questions or problems, please try to get help from your local distributor.
40
advertisement
Related manuals
advertisement