Extron electronic Fiber Optic Transmitter-Receiver Pair FOX 500 Rx User's Manual


Add to my manuals

advertisement

Extron electronic Fiber Optic Transmitter-Receiver Pair FOX 500 Rx User's Manual | Manualzz

Specifications — FOX 500

N The FOX 500 consists of a transmitter (FOX 500 Tx) and a receiver (FOX 500 Rx) with one or two fiberoptic cables linking the two units.

N The analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fibercable, and converted back to analog RGB in the receiver.

N The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

Optical fiber interconnection between transmitter and receiver

Number/type �������������������������������� 1 or 2 fiber optic

N Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.

Connectors ������������������������������������� 2 LC connectors

Operating distance

Singlemode ������������������������� 30 km (18�75 miles) with singlemode (SM) cables with a FOX 500 SM

Multimode �������������������������� 300 m (985') with 62�5 µm multimode (MM) cables with a FOX 500 MM

1 km (3280') with 50 µm multimode (MM) cables with a FOX 500 MM

2 km (6561') with 50 µm 2000 MHz bandwidth laser optimized multimode cable with a FOX 500 MM

N Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength����������� 850 nm for FOX 500 MM, 1310 nm for FOX 500 SM

Data rate ����������������������������������������� 4�25 Gbps

Transmission power

Singlemode ������������������������� -5 dBm, typical

Multimode �������������������������� -5 dBm, typical

Maximum receiver sensitivity

Singlemode ������������������������� -18 dBm, typical

Multimode �������������������������� -12 dBm, typical

Optical loss budget

Singlemode ������������������������� 13 dB, maximum

Multimode �������������������������� 7 dB, maximum

Video

Number/signal type ��������������������� 1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs input

1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs loop-through

Gain ������������������������������������������������� Unity

Pixel data bit depth ����������������������� 8 bits per channel, 3 channels (R, G, B)

Maximum resolution �������������������� 1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to

2048x1120, undersampled

Video input and loop-through — transmitter(FOX 500 Tx)

Number/signal type ��������������������� 1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs input

1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs loop-through

Connectors ������������������������������������� 1 x 5 female BNC or (1) female 15-pin HD for input

(1) female 15-pin HD for loop-through

Nominal level �������������������������������� 0�7 Vp-p for RGB

Minimum/maximum levels �������� Analog: 0�3 V to 1�5 Vp-p with no offset

Impedance �������������������������������������� 75 ohms

Horizontal frequency �������������������� 24 kHz to 100 kHz

Vertical frequency �������������������������� 40 Hz to 120 Hz

Return loss �������������������������������������� <-40 dB @ 5 MHz

N These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA

21, CFR 1040.10, and FDA 21 CFR 1040.11.

Extron FOX 500 Tx, FOX 500 Rx Fiber Optic Transmitter-Receiver Pair • Specifications 1

Specifications — FOX 500, cont’d

2

Video output — receiver(FOX 500 Rx)

Number/signal type ��������������������� 2 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs (follows input or can be set by user)

Connectors ������������������������������������� 1 x 6 female BNC and (1) female 15-pin HD

Nominal level �������������������������������� 0�7 Vp-p for RGB

Minimum/maximum levels �������� 0�3 V to 1�5 Vp-p

Impedance �������������������������������������� 75 ohms

Return loss �������������������������������������� -40 dB @ 5 MHz

DC offset ����������������������������������������� ±5 mV with input at 0 offset

Video delay ������������������������������������ 1-2 frames

Sync

Input type ��������������������������������������� Autodetect RGBHV, RGBS, RGsB, RsGsBs

Output type ������������������������������������ RGBHV, RGBS, RGsB, RsGsBs (follows input or can be set by user)

Input level �������������������������������������� 2�5 V to 5�0 Vp-p

Output level ����������������������������������� TTL: 5�0 V p-p, unterminated, in HV or S; or 0�3 V p-p on Gs, terminated

Input impedance ��������������������������� 510 ohms

Output impedance ������������������������ 75 ohms

Polarity�������������������������������������������� Positive or negative (follows input or can be set by user)

Audio

Gain

Range ���������������������������������� Adjustable, -18 dB to +10 dB

Default

Captive screw connector

Unbalanced output: -6 dB; balanced output: 0 dB

Mini stereo jack ���������� Unbalanced output: 0 dB

Frequency response ���������������������� 20 Hz to 20 kHz, ±0�5 dB

THD + Noise ���������������������������������� 0�10% @ 1 kHz at nominal level

S/N �������������������������������������������������� >80 dB at maximum output (unweighted)

CMRR ���������������������������������������������� 65 dB @ 20 Hz to 20 kHz

Audio bits per sample ������������������ 18 bits per channel, 2 channels (L, R)

Sampling rate ��������������������������������� 48 kHz

Audio input — transmitter(FOX 500 Tx)

Number/signal type ��������������������� 2 inputs (mixed): 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono

Connectors ������������������������������������� (1) 3�5 mm captive screw connector, 5 pole

(1) 3�5 mm mini stereo jack

Impedance �������������������������������������� 18k ohms unbalanced, 20k ohms balanced, DC coupled

Nominal level �������������������������������� +4 dBu (1�23 Vrms), -10 dBV (316 mVrms)

Maximum level ������������������������������ +17 dBV, (unbalanced) at 1% THD+N

N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio output — receiver(FOX 500 Rx)

Number/signal type ��������������������� 2 buffered outputs: 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono

Connectors ������������������������������������� (1) 3�5 mm captive screw connector, 5 pole

(1) 3�5 mm mini stereo jack

Impedance �������������������������������������� 50 ohms unbalanced, 100 ohms balanced

Nominal level �������������������������������� +4 dBu (1�23 Vrms), -10 dBV (316 mVrms)

Maximum level (Hi-Z) ����������������� >+19 dBu, unbalanced at 1% THD+N

Extron FOX 500 Tx, FOX 500 Rx Fiber Optic Transmitter-Receiver Pair • Specifications

Maximum level (600 ohm) ����������� >+15 dBm, unbalanced at 1% THD+N

Audio delay ����������������������������������� 1�5 frames

Control/remote

Serial control ports on each unit (transmitter and receiver)

Control �������������������������������� 1 RS-232, 3�5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)

1 RS-232, 2�5 mm mini stereo jack (front panel)

Pass-through ���������������������� 1 RS-232, 3�5 mm captive screw connector, 5 pole (3 pins are used) (rear panel); in parallel with 1 RS-232, 2�5 mm mini stereo jack (front panel)

Baud rate and protocol

Control �������������������������������� 9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through ���������������������� 9600 to 115,200 baud

Serial control pin configurations

Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND

Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND

Program control ����������������������������� Extron’s control/configuration program for Windows ®

Extron’s Simple Instruction Set (SIS ™ )

General

Power ���������������������������������������������� 100 VAC to 240 VAC, 50-60 Hz, 11 watts, internal

Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling ������������������������������������������� Convection, vents on top and sides

Mounting

Rack mount ������������������������ Yes, with optional rack shelf kit

Furniture mount ���������������� Yes, with optional under desk mounting kit

Enclosure type ������������������������������� Metal

Enclosure dimensions ������������������� 1�7" H x 8�7" W x 9�5" D (1U high, half rack wide)

(4�3 cm H x 22�1 cm W x 24�1 cm D)

(Depth excludes connectors and knobs�)

Product weight ������������������������������ 2�3 lbs (1�0 kg) per unit, 4�6 lbs (2�1 kg) per pair

Shipping weight ���������������������������� 4 lbs (2 kg) per unit, 8 lbs (4 kg) per pair

Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety ����������������������������������� CE, CUL, FDA Class 1, UL

EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI,

MTBF ����������������������������������������������� 30,000 hours

Warranty ����������������������������������������� 3 years parts and labor

N All nominal levels are at ±10%.

N Specifications are subject to change without notice.

7.6-031709-D14

Extron FOX 500 Tx, FOX 500 Rx Fiber Optic Transmitter-Receiver Pair • Specifications 3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement