PRIMERGY TX100 S1

System configurator and order-information guide

July 2010

Contents

Instructions

Configuration diagram

Configurator

0 System software

I Basic unit

II Processor

III Memory

IV Graphics

V Accessible drives

VI RAID Controller

VII Hard disk drives

VIII Communikation/Network

IX Miscellaneous

X Country specific power cords

Change report

PRIMERGY Server

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Instructions

This document contains basic product and configuration information that will enable you to configure your system via

PC-/ System-Architect.

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete

PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

Section III

X times

S26361-XXX-XXX

Memory XXX MB max. X times per system

Memory, example

There are X memory slots which can be equipped with XXX MB.

It is permissible to make up to X passes through the memory upgrade options.

S26361-XXX-XXX

Memory XXX MB max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates.

4x

Please note that there are information symbols which indicate necessary information.

For further information see: http://ts.fujitsu.com/products/standard_servers/index.html

(internet) https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

(extranet)

Prices and availability see price list and PC-/ System-Architect

Subject to change and errors excepted

Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 13

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Configuration diagram PRIMERGY TX100 S1

FRONT VIEW SIDE VIEW

Standard

Power supply

5.25" x 1.6" CD / DVD drive

5.25"x1.6"

System unit ( I )

DIMM 2 - B

DIMM 1 - B

DIMM 2 - A

DIMM 1 - A

Memory ( III )

XEON

Core2Duo or Pentium

Processor ( II )

Accessible drives (V)

Hard disks ( VI )

2 or 4 HDD Bays depending on Base unit.

SATA - 3.5"x1"

SATA - 3.5"x1"

SATA - 3.5"x1"

SATA - 3.5"x1"

Key:

Included in basic unit

Option

Extension slots

Disk Array ( VIII )

Communication/Network ( IX )

PCIe x4 (wired x1), notched possible to plug x16 cards

PCIe x8 lp option available

PCIe x8 (wired x4)

PCI (3.3V) 32-Bit / 33MHz lp option available

Fujitsu Technology Solutions x86 PRIMERGY Server 3 of 13

Start PRIMERGY TX100 S1

Software Configurator 32 bit

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30 with OEM-Software for PRIMERGY Server

VMware-Software

- VCMS VirtualCenter Management Server without OEM-Software for PRIMERGY Server

OEM-SW is bound to HW and is not allowed to be ordered separately.

Exception: VMware SW

For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.

Linux - Software **)

- Open Enterprise Server ***)

- SuSE Linux ES (OEM): LO

- SuSE Linux ES (Support): LS

- Red Hat EL (OEM): LO

- Red Hat EL (Support): LS

Microsoft - Windows Server 2008: W

- Windows Web Server 2008

- Windows Server 2008 Standard, Enterprise

- User, Device Client Access Licenses (CAL)

- Terminal Server Client Access Licenses (CAL)

Manageability Software: V**)

Backup-Software /

Application-Software: U

- ARCserve

- openSM2

Details eg. version numbers are published in the separate SW-Configurator

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses: for internal users: for partners:

Continue with PRIMERGY

HW configurator

Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 13

Start PRIMERGY TX100 S1

Software Configurator 64 bit

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30 with OEM-Software for PRIMERGY Server

VMware-Software

- VCMS VirtualCenter Management Server

For all SW products please refer to the corresponding software configurator accessible via the Extranet under

"Configuration & Tools, -All configurations, -Software,

URL see below.

Microsoft - Windows Server 2008: W

- Windows Web Server 2008

- Windows Server 2008 Standard, Enterprise

- User, Device Client Access Licenses (CAL)

- Terminal Server Client Access Licenses (CAL) without OEM-Software for PRIMERGY Server

OEM-SW is bound to HW and is not allowed to be ordered separately.

only

Linux - Software *) **)

- SuSE Linux ES (OEM): LO

x86_64 - SuSE Linux ES (Support): LS

- Red Hat EL (OEM): LO

- Red Hat EL (Support): LS

Microsoft - Windows Small Business Server 2008: ROK

- Windows Small Business Server 2008 Standard, Premium

- User, Device Client Access Licenses (CAL)

Details eg. version numbers are published in the separate SW-Configurator

**) Pay attention to the release and ordering information in PRINCE -> Operating System

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses: for internal users: for partners:

Continue with PRIMERGY

HW configurator

Fujitsu Technology Solutions x86 PRIMERGY Server 5 of 13

Start PRIMERGY TX100 S1

Section I Basic unit

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

System unit consisting of:

* Housing including standard power supply (no redundancy)

* Imprint of MAC Adress on system label and delivery note as standard

Systemboard with:

* 4 PCI expansion slots:

1x PCIe x4 (wired x1), notched (posible to plug x16 cards)

1x PCIe x8; fits for lp and fh formfactor cards

1x PCIe x8 (wired x4)

1x long 32Bit / 33MHz (3.3V); fits for lp and fh formfactor cards

* 4 memory slots for up to 8GB (PC2 6400) registered DDR II RAM (ECC), max. 2GB modul per slot

* 2 bays 5.25" for accessible drives

* 2 or 4 LFF (3.5") bays 1" high for no hot plug SATA HD (depending on base unit)

* SATA with up to 4 HDD's over ICH-9R (Chipset)

* ATI ES1000 32MB

* Intel 10/100/1000 Mb/s (82566DM) on-board LAN

Cables included in Base Unit:

1. SATA cabel for CD/DVD

2. 2 or 4 x SATA cabel in basic unit (depending on base unit)

PS/2 mouse

ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

External Interfaces:

1x RS-232-C (serial, 9 pins)

1x Centronics (parallel, 25 pins, EPP/ECP compatible) optional

1x keyboard (PS/2)

1x mouse (PS/2)

1x VGA (15 pins)

10x USB 2.0 ( 2x frontside, 6x on rearside, 2x released internal USB Interfaces for backup devices)

1x LAN RJ45

A

Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 13

A

S26361-K1326-V101

SATA basic unit Floorstand without CPU and Memory

- Minimum one CPU /

Memory module has to be selected via CPU /

Memory order codes for up to 2 LFF (3.5") HDD

(2 HDD cables included)

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

S26361-F3301-E5

Energy Star 5.0 compliance

Limits configuration in accordance with Energy Star requirements

Put EPA comformity on Label

Use EPA specific BIOS settings max. 1x per system

S26361-F3436-E4 no TPM

Disable function for Trusted Platform

Use according to import restrictions max. 1x per system

S26361-K1326-V121

SATA basic unit Floorstand without CPU and Memory

- Minimum one CPU /

Memory module has to be selected via CPU /

Memory order codes for up to 4 LFF (3.5") HDD

(4 HDD cables included)

Be aware of configuration Limits for Energy Star Configuration max. T9400, 8GB RAM, 2x SATA HDD + 2 SATA/Backup, 2x LAN only with on-board graphics ATI 32MB

B

Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 13

Section

B

II Processor

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

One of following CPU´s has to be selected for an orderable basic unit

Dual-Core CPU`s

- 1x 64-bit Intel

Core2 Duo Exx00 (2/3MB SLC) or

Xeon UP (4/6MB SLC)

occupies socket for one CPU

Pentium DC E5200 2.50GHz 2MB 800MHz FSB (65W)

Pentium DC E5400 2.70GHz 2MB 800MHz FSB (65W)

Pentium DC E6300 2.80GHz 2MB 1066MHz FSB (65W)

Pentium DC E6500 2.93GHz 2MB 1066MHz FSB (65W)

Core2 Duo E7400 2.80GHz 3MB 1066MHz FSB (65W)

Core2 Duo E7600 3.06GHz 3MB 1066MHz FSB (65W)

Xeon UP E3110 3.00GHz 6MB 1333MHz FSB (65W)

Xeon UP E3120 3.16GHz 6MB 1333MHz FSB (65W)

Quad-Core CPU`s

- 1x 64-bit Intel Xeon UP (6/8MB SLC = Second Level Cache on Chip )

S26361-F3582-E520

S26361-F3582-E540

S26361-F3582-E630

S26361-F3582-E650

S26361-F3582-E740

S26361-F3582-E760

S26361-F3503-E210

S26361-F3503-E220

occupies socket for one CPU

Xeon UP X3220 2.40GHz 2x4MB 1066MHz FSB (95W)

Xeon UP X3330 2.66GHz 6MB 1333MHz FSB (95W)

S26361-F3504-E220

S26361-F3504-E330

Section III Memory

There are 2 memory banks with 2 DIMM slots each.

Single channel memory configuration allow maximum flexibility:

Additional memory can be configured as single memory modules.

Dual channel memory configurations for maximum performance:

For optimum performance memory has to be configured in pairs of memory modules with identical size.

S26361-F3372-E413

Main memory 1GB ECC

DDR2 800/PC2-6400 unbuffered consisting of one module max. 4x per system

S26361-F3372-E414

Main memory 2GB ECC

DDR2 800/PC2-6400 unbuffered consisting of one module max. 4x per system

Section IV Graphics

ATI ES1000 (32MB) on board

C

S26361-F2748-E533

PY VGA Card 256MB PCI-e x1

NVIDIA Quadro NVS 290

256 MB PCIe-x1

2x DVI or 2x VGA or

1x DVI plus 1x VGA cables adapters included

Dual head + fully 3-D supported for Windows OS not supported for Linux OS (native) full height bracket max. 1x per system

The hight end optional NVIDIA NVS290 graphic card offers dual head operation and fully 3D video support.

The cables for either two times DVI or VGA connections are part of the delievery.

This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.

Only one card per server is allowed.

PY VGA card must be installed in slot 4

S26361-F2748-L533

PY VGA card 256MB PCI-e x1 for loose delivery

Fujitsu Technology Solutions x86 PRIMERGY Server 8 of 13

Section

C

V

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Accessible drives

There are 2 drive bays (2x 5,25") for accessible drives.

While stock lasts a FDD may be used in Projects only.

Following USB Components are available

1) USB DVD+-RW:

Super Multi DVD slim drive

2) FDD USB (external): external USB FDD

3) USB Keyboard:

KBPC PX D, professional keyboard

4) USB Mouse:

Optical Wheel Mouse Tilt USB/PS2

5) USB Memorybird:

MyUSB P910 8GB

S26391-F7119-L100

(USB cable included)

S26391-F264-L226

(USB cable included)

S26381-K340-V120

S26381-K415-L100

S26391-F6047-L208

S26361-F3266-E2

DVD-ROM 16/48x

SATA incl. description (Ger/US)

1.6 x 5.25", black bezel max. 1x per system

S26361-F3267-E2

DVD-RW 16x super multi drive

S26361-F3530-E2

Blu-ray Combo SATA all formats, DUAL/DL, DVD-RAM 6x BD-ROM, 16x DVD, 40x CD

SATA BD DL and all CD/DVD formats only W2K, W3K and Linux

1.6 x 5.25", black bezel max. 1x per system

1.6 x 5.25", black bezel max. 1x per system

D

S26361-F3324-E4

Tape drive DDS Gen5 USB 5.25"

36GB, 3MB/s, USB 2.0

Connector: USB "B" with USB cable kit incl. description (Ger/US) data and cleaning cartridge

1.6 x 5.25", black bezel max. 1x per system

S26361-F3325-E4

Tape drive DDS Gen6 USB 5.25"

80GB, 3MB/s, USB 2.0

Connector: USB "B" with USB cable kit incl. description (Ger/US) data and cleaning cartridge

1.6 x 5.25", black bezel max. 1x per system

S26361-F3857-E4

RDX drive USB 5.25" internal

80-160GB, 25MB/s, USB 2.0

Connector: USB "B" with USB cable incl. description (Ger/US) without RDX cartridges

1.6 x 5.25", black bezel max. 1x per system

RDX cartridges must be ordered separately

RDX 80GB = S26361-F3857-L80

RDX 160GB = S26361-F3857-L160

RDX 320GB = S26361-F3857-L320

Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 13

Section

D

VI RAID-Controller

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Section

4x

VII Hard disk drives

There is a 6 port SATA controller in the Base Unit.

Up to 4 SATA LFF (3.5") hard disks can be configured.

S26361-F3219-E160

HD 160GB 7.2krpm 3.5"

7200rpm,<9.0 ms, 8MB Cache

SATA 3Gb/s non hot plug max. 4x per system

S26361-F3334-E250

HD 250GB 7.2krpm 3.5"

S26361-F3334-E500

HD 500GB 7.2krpm 3.5"

S26361-F3334-E750

HD 750GB 7.2krpm 3.5"

7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache 7200rpm,<9.0 ms, 8MB Cache

BC-SATA 3Gb/s BC-SATA 3Gb/s BC-SATA 3Gb/s non hot plug non hot plug non hot plug max. 4x per system max. 4x per system max. 4x per system

S26361-F3334-E100

HD 1000GB 7.2krpm 3.5"

7200rpm,<9.0 ms, 8MB Cache

BC-SATA 3Gb/s non hot plug max. 4x per system

E

Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 13

Section

E

VIII Communication / Network

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

S26361-F3241-E1

(Glyndon)

Gigabit Ethernet Contr. 1000TX

Eth Ctrl 1x1Gbit PCIe Pro/1000PT Cu

Intel PRO/1000 PT Server Adaptor

PCIe x1 ext: for RJ45-connector, Cat 5 max. 2x per system

S26361-F3228-E1

(Redwater)

Gigabit Ethernet Controller Dual 1000TX

Eth Ctrl 2x1Gbit PCIe PRO/1000PT Cu

Intel Pro/1000PT dual port Server Adapter

PCIe x4 ext: for RJ45-plug, Cat 5 max. 1x per system

2x

S26361-F3516-E1

(Shelter Island)

Gigabit Ethernet Controller 1000TX

Eth Ctrl 1x1Gbit PCIe Gigabit CT DT Cu

Intel® Gigabit CT Desktop Adapter

PCIe x1 ext: for RJ45-connector, Cat 5 max. 2x per system

F

Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 13

Section

F

IX Miscellaneous

S26361-F2742-E30

Paralell Interface option occupies one card slot max. 1x per system

S26361-F2542-E323

Key lock in side door option black max. 1x per system

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Section X Country specific power cords

Power cord for floorstand versions for following countries:

1,8 m, grey

T26139-Y1740-E10

T26139-Y1742-E10

T26139-Y1743-E10

T26139-Y1744-E10

T26139-Y1745-E10

T26139-Y1746-E10

T26139-Y3850-E10

D, A, B, F, NL, FIN, N, S, E, P, RUS, TR

USA, Canada

Switzerland

UK, IR

Italy

Denmark

Option "no powercord", for Countries without specific cable orderable like e.g. China

USB-Keyboards for following countries:

KBPC PX, prof. keyboard

S26381-K340-E110

S26381-K340-E120

S26381-K340-E140

S26381-K340-E155

S26381-K340-E165

S26381-K340-E180

S26381-K340-E185

USA / international

Germany

France

Sweden / Finland

United Kingdom

Spain

Italy

Czech/Slovak

Switzerland

Thai

KBPC SX, KB400, standard keyboard

S26381-K397-E110

S26381-K397-E120

S26381-K397-E140

S26381-K397-E155

S26381-K550-E102

S26381-K550-E120

S26381-K550-E140

S26381-K550-E154

S26381-K397-E165

S26381-K397-E180

S26381-K397-E185

S26381-K550-E165

S26381-K550-E180

S26381-K550-E185

S26381-K550-E104

S26381-K550-E170

S26381-K550-E177

Options and other peripherals

For other options, refer to SystemArchitect and Pricelist.

These options are supplied lose with the shipment.

For suitable peripherals for this product, please refer to SystemArcitect.

End PRIMERGY TX100 S1

Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 13

Change Report

Date Order number Changes

2009-08-17 New Order Codes for CPUs E5200 and E7400

2009-08-17 S26361-F2542-E323 Key Lock Option changed to BLACK => new Order Code

2009-06-30 First Release

System configurator and order-information guide

PRIMERGY TX100 S1 Status 2010-06-30

Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 13