FUNAI MBP5130/F7 Owner's Manual

Owner’s Manual

MBP5130/F7

Blu-ray Disc / DVD Player

© 2010 Funai Electric Co., Ltd.

2

INTRODUCTION

Safety Instructions

The model and serial numbers of this unit may be found on the cabinet.

You should record and retain those numbers for future reference.

Model No.:

Serial No.:

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO

RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO

DRIPPING OR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE

PLACED ON THE APPARATUS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The important note is located on the rear or bottom of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated“dangerous voltage”within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The symbol for CLASS ll (Double Insulation)

IMPORTANT SAFETY

INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/

TV technician for help.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

LASER SAFETY

This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION: Laser radiation when open. Do not stare into beam.

LOCATION: Inside, near the BD mechanism.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of

Rovi Corporation. Reverse engineering and disassembly are prohibited.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 3.9 inches (10cm) or more around this apparatus.

To Avoid the Hazards of Electrical Shock and

Fire

• Do not handle the AC power cord with wet hands.

• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

Location and Handling

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit. Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly.

This is not a malfunction.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

Dew Condensation Warning

• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

3

Note about Recycling

• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

Notice for Progressive Scan Output

• Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output.

If there are questions regarding your TV set compatibility with this 480p BD/DVD player, please contact our customer service center.

ENERGY STAR® is a joint program of the U.S. Environmental Protection

Agency and the U.S. Department of

Energy helping us all save money and protect the environment through energy efficient products and practices.

Supplied Accessories

• Remote Control (NB904UD/NB954UD)

• Batteries (AAA, 1.5V × 2)

• Audio / video cables

• Quick Start Guide

• Wireless Network Connection Guide

• VUDU sheet

• Netflix Box-insert

© 2010 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai.

Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of

Funai Electric Co., Ltd. and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited.

Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

4

CONTENTS

INTRODUCTION................................................................2

Safety Instructions ................................................................... 2

Supplied Accessories .............................................................. 4

Trademark Information .......................................................... 6

Front Panel ................................................................................. 7

Rear Panel ................................................................................... 7

Remote Control ........................................................................ 8

Installing the Batteries in the Remote Control .............. 9

Opening Screen ........................................................................ 9

CONNECTIONS ...............................................................10

Connection to the TV ............................................................10

Connection to an Audio System .......................................11

2-Channel Analog Audio Connection .........................11

Digital Audio Connection ................................................11

HDMI Audio Connection ..................................................11

Connection to the Network ...............................................12

Wired Connection ..................................................................12

Wireless Connection .............................................................13

Finding the Video Channel on Your TV ...........................13

PLAYBACK .........................................................................14

Information on Playback .....................................................14

Playable Discs and Files ....................................................14

Unplayable Discs and Files ..............................................14

Region Codes .......................................................................15

On-Screen Display ..............................................................15

How to Insert a Disc ..............................................................15

Reading the SD Memory Card ...........................................16

Selecting the Media Mode .................................................16

Playing Back (BD / DVD/ Disc with AVCHD Files) ........16

Using the Title / Disc / Pop-up Menu ..............................17

Playing Back (Audio CD / Windows Media

TM

Audio /

JPEG Files) .................................................................................17

KODAK Picture CD .................................................................18

Fast Forward / Fast Reverse ................................................19

Slow Forward Playback ........................................................19

Step by Step Playback ..........................................................19

Repeat Playback .....................................................................19

Program Playback ..................................................................19

Random Playback ..................................................................20

Rapid Playback ........................................................................21

Adjusting the Picture ............................................................21

Virtual Surround .....................................................................21

PIP (BONUSVIEW) Setting ...................................................22

Camera Angle ..........................................................................22

Enjoying BD-Live Discs with Internet .............................22

Search .........................................................................................23

Using [the Number buttons] (Direct Search) ...............23

Switching Subtitles................................................................23

Switching Audio Soundtrack .............................................24

Setting the BD Audio Mode ...............................................24

NETWORK OPERATIONS ..............................................25

Netflix Operations ..................................................................25

Before Activating the Connection to Netflix ............25

Activating the Connection to Netflix...........................25

Watching Streaming Movies ..........................................25

Blockbuster Operations .......................................................26

Before Activating the Connection to

Blockbuster ...........................................................................26

Activating the Connection to Blockbuster ................26

Guide to Blockbuster Menu Screen .............................26

Renting or Purchasing Movies / TV Episodes ...............26

Searching Movies / TV Episodes ....................................27

Watching Rented or Purchased Movies /

TV Episodes...........................................................................27

VUDU Operations ...................................................................27

Before Activating VUDU ...................................................27

Activating VUDU .................................................................27

Guide to VUDU Menu Screen .........................................28

Renting or Purchasing VUDU Movies /

TV Episodes...........................................................................28

Watching Rented or Purchased VUDU Movies / TV

Episodes .................................................................................29

Using Internet Applications ...............................................29

FUNCTION SETUP ..........................................................29

Quick ......................................................................................29

Custom ..................................................................................30

Language ..........................................................................30

Video ....................................................................................30

Audio ..................................................................................31

HDMI Audio Out Setting ..................................................32

Digital Out Setting .............................................................32

Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack) ...........................33

Parental ................................................................................35

Others ...............................................................................36

fun-Link (HDMI CEC) ..........................................................38

Network Connection ............................................................39

Connection Test ..................................................................39

Network Selection ..............................................................39

Software Update .................................................................43

Current Version ....................................................................43

Initialize .....................................................................................44

OTHERS .............................................................................45

Troubleshooting .....................................................................45

Language Code List...............................................................48

Servicing ...................................................................................48

Specifications ..........................................................................49

NETWORK SERVICE DISCLAIMER .............................49

Network Service Disclaimer ...............................................49

ESPAÑOL ...........................................................................50

Discos Reproducibles ...........................................................50

Discos y Archivos Reproducibles ..................................50

Códigos de Región .............................................................50

Encontrar el Canal de Vídeo en su Televisor .................50

Ajusta el idioma para el menú del reproductor ..............................................................................50

Reproducción Directa...........................................................51

LIMITED WARRANTY ....................................back cover

5

6

Trademark Information

HDMI, the HDMI Logo, and High-Definition

Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the

United States and other countries.

“AVCHD” and the

“AVCHD” logo are trademarks of Panasonic

Corporation and

Sony Corporation.

“BONUSVIEW” is trademark of Blu-ray

Disc Association.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

"BD-Live" and

"BD-Live" logo are trademarks of Blu-ray

Disc Association.

Manufactured under license under U.S.

Patent #’s:5,451,942;

5,956,674; 5,974,380;

5,978,762; 6,487,535

& other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks,

& DTS-HD, DTS-HD

Advanced Digital Out and the DTS logos are trademarks of DTS,

Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

VUDU

Netflix and the

Netflix logo are trademarks or registered trademarks of Netflix,

Inc.

TM is a trademark of VUDU,

Inc.

BLOCKBUSTER name, design and related marks are trademarks of Blockbuster Inc.

Java and all Java based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates.

“Blu-ray Disc“ and are trademarks.

is a trademark of DVD Format / Logo Licensing

Corporation.

Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft

Corporation in the

United States and/or other countries.

Kodak and KODAK Picture CD

Compatible are trademarks of Kodak used under license.

Front Panel

1 2* 3

OPEN/CLOSE

4 5 6* 7 8

STOP PLAY STANDBY/ON

SD card

9

(*) The unit can also be turned on by pressing these buttons.

1. Disc tray

2. A OPEN/CLOSE button*

3. Infrared sensor window

4. C STOP button

5. PLAY indicator

• This indicator lights up in green when discs or

SD cards play back.

6. B PLAY button*

7. STANDBY/ON indicator

• This indicator lights up in red when the power is in the standby mode.

8. y STANDBY/ON button

• Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)

• Press and hold for 10 seconds to shut down the unit.

9. SD card slot

Note

• This unit will be turned into the standby mode automatically after 25 minutes of no action.

Rear Panel

1

2 3 4 5 6

LAN

COAXIAL

HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

Wireless LAN

7

1. AC power cord

2. LAN terminal

3. HDMI OUT jack

4. AUDIO OUT jacks

5. DIGITAL OUT (COAXIAL) jack

6. Wireless LAN (Internal)

7. VIDEO OUT jack

Note

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

• This unit does not have the RF modulator.

• Do not try to rip the internal wireless LAN from the unit.

7

Remote Control

5

6

7*

8

9

10

11

12

1

2

3

4

STANDBY/ON

13*

14

15

(*) The unit can also be turned on by pressing these buttons.

1. STANDBY/ON y button

• Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)

2. RED / GREEN / BLUE / YELLOW button

• Press to select items on some BD menus.

• When file list / thumbnail list is shown, press to switch between pages.

3. TOP MENU button

• Press to display the top menu.

• During Netflix / Blockbuster / VUDU feature screen is displayed (except during playback), press to exit.

4. K/ L/s/B buttons

• Press to select items or settings.

5. SETUP button

• Press to display or to exit the setup menu.

6. E (reverse) button

• During playback, press to fast reverse the playback.

7. B (play) button*

• Press to start playback or resume playback.

8

16

17

18

19

20

21

22

23

24

25

8. H (skip) button

• During playback, press once to return to the beginning of the current title, chapter or track.

• During playback, press twice to return to the previous title, chapter or track.

• During the JPEG playback, press to return to the previous file.

9. C (stop) button

• Press to stop playback.

10. Number buttons

• Press to enter the title, chapter, track or file number.

• Press to enter values in the input field.

11. SEARCH button

• Press to display the search menu.

12. REPEAT button

• Press to toggle between various repeat modes.

13. OPEN/CLOSE A button*

• Press to open or close the disc tray.

14. POP MENU / MENU button

• Press to display the pop-up menu / disc menu.

15. OK button

• Press to confirm or select menu items.

16. RETURN button

• Press to return to the previously displayed menu screen.

17. D (forward) button

• During playback, press to fast forward the playback.

• In pause mode, press to slow forward the playback.

18. G (skip) button

• During playback, press to skip to the next title, chapter, track or file.

19. F (pause) button

• Press to pause playback.

• When playback is in pause mode, press repeatedly to forward the playback step by step.

20. DISPLAY button

• Press to display the on-screen display menu.

21. ANGLE button

• Press to access various camera angles on the disc.

• Press to rotate the JPEG files clockwise by 90 degrees.

22. SUBTITLE button

• Press to display the subtitle menu.

23. AUDIO button

• Press to display the audio menu.

24. MODE button

• During BD or DVD or AVCHD files playback, press to display the setting for the rapid playback and the picture adjustment.

• During BD, DVD and CD playback, press to display the setting for the virtual surround.

• During BD playback, press to turn the picturein-picture feature on or off (only applicable to

BD-video which supports the PIP function).

• During the JPEG playback, press to display menus for changing the visual effect for switching the image or changing the size of the image.

• In stop mode with audio CD or WMA / JPEG files inserted, press to display menus for program and random playback.

• In stop mode with BD inserted, press to display a menu for setting the BD audio mode.

25. CLEAR button

• Press to clear the information once entered or to cancel the programming for audio CD, etc.

Installing the Batteries in the Remote Control

Install AAA (1.5V) battery × 2 matching the polarity indicated inside battery compartment of the remote control.

Opening Screen

In stop mode, opening screen is displayed.

“VUDU” :

Watch HD movies

To access the VUDU App Home screen

To access the Netflix screen “NETFLIX“:

“BLOCKBUSTER“: To access the Blockbuster menu screen

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together.

Although they may look similar, different batteries may have different voltages.

• Make sure that the + and - ends of each battery match the indications in the battery compartment.

• Remove batteries from battery compartment that are not going to be used for a month or more.

• When disposing of used batteries, please comply with governmental regulations or environmental public rules that apply in your country or area.

• Do not recharge, short-circuit, heat, burn or disassemble batteries.

9

CONNECTIONS

Connection to the TV

HDMI Video / Audio Connection

(Supports up to 1080i / 1080p, 1080p24 resolution.)

Your TV

LAN

COAXIAL

HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

Wireless LAN

HDMI IN

HDMI cable(not supplied)

HDMIOUT

• No analog audio connection required.

• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.

• High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for optimal compatibility.

Picture is not displayed on the TV screen ...

The indicators blink under the following conditions.

• When the connected device does not support HDCP.

• When the connected device is recognized as an HDCP incompatible by HDMI SRM.

• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for some reason.

The indicators blink as follows for 30 seconds.

STOP PLAY STANDBY/ON

SD card

Standard Video + Standard Audio Connection

(Supports only 480i resolution.)

Your TV

LAN

COAXIAL

HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

Wireless LAN

L

Video cable(supplied) VIDEO IN

L

AUDIO IN

R

R

AUDIO

OUT

VIDEO

OUT

Audio cable(supplied)

• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, pictures may be distorted due to the copy right protection system.

10

Connection to an Audio System

• When you change the connections, all devices should be turned off.

• Refer to the manual accompanying external devices for more information.

2-Channel Analog Audio Connection stereo system

AUDIO IN

R L

Digital Audio Connection

AV receiver/amplifier

DIGITAL AUDIO INPUT

COAXIAL

Analog audio input jacks

Audio cable

(supplied)

Digital audio coaxial input jack

COAXIAL

Digital audio cable

(not supplied)

LAN

COAXIAL

HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

Wireless LAN

LAN HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

L

Wireless LAN

R

AUDIO

OUT

AUDIO OUT DIGITAL OUT (COAXIAL)

To set up “Digital Out”, refer to page 32.

HDMI Audio Connection

AV receiver/amplifier with an HDMI input jack

HDMI IN

HDMI cable

(not supplied)

LAN

COAXIAL

HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

Wireless LAN

HDMIOUT

To set up “HDMI Audio Out”, refer to page 31.

11

Connection to the Network

By connecting this unit to the Internet, you can access Netflix, Blockbuster and VUDU services and applications, BD-Live features on a Blu-ray Disc and perform network update.

- For more information about software update, refer to “Network Update” on page 44.

- For more information about BD-Live, refer to “Enjoying BD-Live Discs with Internet” on page 22.

- For more information about Netflix, refer to “Netflix Operations” on page 25.

- For more information about Blockbuster, refer to “Blockbuster Operations” on page 26.

- For more information about VUDU, refer to“VUDU Operations” on page 27.

Note

• Wired connection is recommended when using following features. (Using following features with wireless connection can be affected by other devices using radio frequencies.)

- Video streaming services (Netflix, Blockbuster or VUDU)

- Network update

Wired Connection

Make the following connection if you are using a wired router.

Hub or broadband router

Networking equipment

(modem,etc.)

LAN

LAN cable(not supplied)

WAN LAN

5 4 3 2 1


Internet

LAN

LAN

COAXIAL

HDMIOUT

L

R

AUDIO

OUT

VIDEO

OUT

Wireless LAN

Note

• After you made a wired connection, set up necessary network settings. (For network setting of wired connection, refer to “Wired” on page 39.)

• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.

• If your network equipment (modem, etc.) does not have broadband router functions, connect a wired broadband router.

• If your network equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.

• For a wired broadband router, use a router which supports 10BASE-T/100BASE-TX.

• Do not connect your PC directly to the LAN terminal of this unit.

• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.

12

Wireless Connection

Make the following connection if you are using a wireless router.

Networking equipment

(modem,etc.)

COAXIAL

L

Wireless LAN

LAN HDMIOUT

R

AUDIO

OUT

VIDEO

OUT

Internet

LAN WAN

Hub or wireless broadband router


Note

• After you made the wireless connection, set up necessary network settings.

(For network setting of wireless connection, refer to “Wireless” on page 41.)

• For a wireless router, use a router which supports IEEE 802.11 b/g/n.

(n is recommended for stable operation of the wireless network.)

• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.

• Other radio devices or obstacles may cause interference to the wireless network connection.

Finding the Video Channel on Your TV

After you have completed all the connections, you must find the correct video channel (external input channel) on your TV.

1 After you have made all the necessary connections, press [STANDBY/ON y ] to turn on the unit.

2 Turn on your TV.

3 Press the button on the TV’s remote control that accesses the external input channel. It may be labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user manual).

Watch HD movies

Note

• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.

13

PLAYBACK

Information on Playback

Before you start playing back a disc, read the following information.

Playable Discs and Files

Playable discs

Blu-ray Disc

- BD-video (single / dual layer)

- BD-RE ver. 2.1 (single / dual layer)

(Recorded in BDMV format)

- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual layer)

(Recorded in BDMV format)

(Unclosed discs may not be played back.)

DVD-video

DVD-RW

DVD-R

CD-DA (audio CD)

CD-RW

CD-R

KODAK Picture CD

DTS-CD

AVCHD

Playable files

Windows Media

JPEG

TM Audio

Media

DVD-RW/-R

SD Memory Card

(including SDHC) miniSD Card microSD Card

BD-RW/-R

DVD-RW/-R

CD-RW/-R

SD Memory Card

(including SDHC) miniSD Card microSD Card

Readable cards Playable files / data

SD Memory Card (8 MB - 2 GB) AVCHD, Windows

SDHC Memory Card Media TM Audio,

(4 GB - 8 GB) JPEG, pictureminiSD Card (8 MB - 2 GB) in-picture microSD Card (8 MB - 2 GB) commentary, subtitles or other extras for BD-ROM ver. 2 (Profile 2.0 /

Profile 1.1)

Note for SD Memory Cards

• This unit supports SD Memory Card with FAT12/

FAT16 file system, and SDHC Memory Card with

FAT32 file system.

• This unit does not support NTFS file system.

• This unit may not read SD Memory Cards formatted on a computer. If that is the case, please reformat the SD Memory Cards in this unit and try again.

14

• This unit does not support miniSDHC and microSDHC Memory Card.

• For miniSD Card and microSD Card, an adapter is necessary.

• Portions of this product are protected under copyright law and are provided under license by ARIS / SOLANA / 4C.

• Please keep the SD Memory Cards in their cases when you are not using them.

• Do not try to open or modify the card.

• Do not touch the terminal surface with your fingers or any metals.

• Do not attach additional labels or stickers to cards.

• Do not remove the label of the SD Memory

Cards.

• This unit recognizes up to 8 characters of file name in the SD Memory Card. Characters after

8th will not be displayed.

Unplayable Discs and Files

• CD-ROM

• CD-I (compact disc-interactive)

• DVD-RAM

• VSD (video single disc)

• DVD-audio

• Video CD

• HD DVD

• SVCD

• Unfinalized disc

• BD-RE (ver.1.0)

• BD-RE (ver.2.1) (Recorded in BDAV format)

• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)

• BD that contains AVCHD files

• BD / DVD / CD / SD Memory Card contains MP3, and DivX® files

• BD/DVD hybrid disc (played back as a BD-video only)

• DVD-RW/-R recorded in non compatible recording format

• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the highdensity Super Audio CD layer cannot be heard.

• Playability of dual discs are not guaranteed.

• This unit cannot play back the disc contents protected by Windows Media™ Digital Rights

Management (DRM).

Region Codes

This unit has been designed to play back BD-video with region “A” and DVD-video with region “1” or “ALL”. You cannot play back BD-video or DVDvideo that are labeled for other regions. Look for the symbols on your BD-video or DVD-video.

If these region symbols do not appear on your BDvideo or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD-video or DVDvideo labeled for a specific region can only be played back in the unit with the same region code.

On-Screen Display

You can check information about the current disc by pressing [DISPLAY].

To call the on-screen display menu, press

[DISPLAY] during playback. Every time you press

[DISPLAY], the information changes. Depending on the media, available information varies.

 Chapter information

<Title / Chapter information for BD and AVCHD>

1 2 3 4 5

1 1/10 T

<Chapter information for DVD>

2 6

3 / 5 0 : 01 : 02

1.Current title number

2. Current chapter number / Total number of chapters

3. Current repeat setting (Only when repeat setting is active)

(C: Chapter repeat, T: Title repeat)

4. Indicates that the multi camera angle images are available on the scene

5.Current playback status

6. Elapsed time (or remaining time) of the current chapter

 Title information

1 2

3 / 5 0 : 01 : 02

1.Current title number / Total number of titles

2. Elapsed time (or remaining time) of the current title

 Track / File information

1 2 3 4

1 / 14 0 : 00: 51 SD G

1. Current track (file) number / Total number of track(file)

2. Elapsed time (or remaining time) of the current track (except for JPEG files)

3. Indication of SD Memory Card playback

4. Current repeat setting

(Only when repeat setting is active)

(T: Track repeat, G: Group repeat,A: All repeat)

 Disc information

1 2

1 / 14 0 : 00: 51 T

1. Current track number / Total number of tracks

2. Elapsed time (or remaining time) of the current disc

 File name information

1

File_name_001

1.Media icon and file name

: WMA files

: JPEG file

 Tag information

<Title name information>

1

TITLE

<Artist name information>

2

ARTIST NAME

1. Title name based on tag information of current Windows Media™ Audio file

2. Artist name based on tag information of current Windows Media™ Audio file

 Decoding format information

1

Dolby Digital

1.Decoding format

How to Insert a Disc

1. Press [OPEN/CLOSE A] to open the disc tray.

2. Place the disc on the disc tray with its label side facing up.

Align the disc to the disc tray guide.

• Make sure the disc is compatible with this unit. (Refer to page 14 for the list of compatible discs.)

3. Press [OPEN/CLOSE

A] to close the disc tray.

It may take a while to load the disc.

To eject the disc:

Press [OPEN/CLOSE

A] to open the disc tray.

Remove the disc.

Press [OPEN/CLOSE

A] to close the disc tray.

15

Reading the SD Memory Card

You can play back the AVCHD / WMA / JPEG files in an SD Memory Card.

With the SD Memory Card, you can also enjoy the following functions.

- Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional contents, refer to the instruction book that came with the disc.)

- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more information about BD-Live, refer to page 22.)

1. Insert an SD Memory Card, with the label side facing up, into the SD card slot until it clicks.

• If no disc is in operation, “Media Select” screen will appear on the TV screen.

2. Use [ K/L] to select “SD Card”, then press

[OK].

3. Use [ K/L] to select a desired track, folder or file, then press [OK]. Use [ s/B] to go backward and forward between the hierarchies.

• If you press [OK] on the desired file, playback will start.

To remove the SD Memory Card:

In stop mode, gently push in the SD Memory

Card, then pull it out slowly.

Note

• The “Media Select” screen will disappear under the conditions listed below:

- when the screen saver is activated.

- when [RETURN] is pressed.

- when the setup menu is called up.

• If the “Media Select” screen disappears before you make the selection, refer to “Selecting the

Media Mode” on page 16.

• Do not remove the SD Memory Card or turn the unit to the standby mode while the contents of the card are in playback. It may result in malfunction or loss of the card’s data.

• Do not delete the folders or files in the SD

Memory Card with your computer. This unit may not read SD Memory Cards formatted on a computer.

• If a folder or file name includes one of the following unrecognizable characters, the folder or file name may not be displayed correctly.

- Unrecognizable characters : . , “ = + [ ] ; / \ : | ¥

• For an SD Memory Card, extension other than listed below cannot be recognized.

- WMA : “.wma”

- JPEG : ".jpg"

Selecting the Media Mode

For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media mode by following the steps below.

1. In stop mode, press [SETUP].

2. Use [ K/L] to select , then press [OK] .

3. Use [ K/L] to select “Mode Select”, then press

[OK].

Quick

Mode Select Disc

HDMI Audio Out HDMI Multi(Normal)

HDMI Video Resolution Auto

Player Menu

Network Selection

English

Wired

4. Use [ K/L] to select the desired media mode, then press [OK].

5. Press [SETUP] to exit.

• Selected media mode is now activated.

Even if you turn the unit to the standby mode in

“SD Card” or “Network” mode, it will be in “Disc” mode the next time you turn it on.

Playing Back (BD / DVD/ Disc with AVCHD

Files)

1. Press [STANDBY/ON y ].

2. Turn on the TV and select the appropriate input on the TV to which the unit is connected.

3. Insert a disc (refer to “How to Insert a Disc” on page 15 ).

4. Playback may start automatically.

If not, press [ B (play)].

• Some discs may show a title or a disc menu.

• For a disc with AVCHD files, title menu is displayed.

In such case, refer to “Using the Title / Disc /

Pop-up Menu” on page 17.

To pause playback:

Press [ F (pause)].

To return to the normal playback:

Press [ B (play)].

To stop playback:

Press [ C (stop)].

Playback will be in Resume-On-Stop mode.

Resume-On-Stop mode

If a playback is in Resume-On-Stop mode, when you press [ B (play)] next time, the playback will start from the point where it has been stopped.

Note

• Resume playback may not be available for the

BD that supports Java applications (BD-Java).

16

• In the “Disc” mode, the resume information will be cleared when;

- [ C (stop)] is pressed while in the Resume-On-

Stop mode.

- the parental level is changed.

- the disc tray is opened.

• In the “SD Card” mode, the resume information will be cleared when;

- [ C (stop)] is pressed while in the Resume-On-

Stop mode.

- the SD Memory Card is removed.

- the unit is turned into the standby mode.

Note

• may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

• During the playback of 2-layered disc, pictures may stop for a moment. This happens when the

1st layer switches to the 2nd layer. This is not a malfunction.

• The operation may vary when you play back

BD-videos, DVD-videos or AVCHD files with disc menu. Refer to the manual accompanying the disc for details.

• If a disc contains AVCHD files, the playback of other files on the same disc are not available. All files on an SD Memory Card are available.

• Set “Still Mode” setting to “Field” in “Video” menu if pictures in the pause mode are blurred. Refer to “Still Mode” on page 30.

Using the Title / Disc / Pop-up Menu

Many of BD-video and DVD-video discs contain title menu (BD-video / DVD-video / AVCHD), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs.

Title menu (BD-video / DVD-video / AVCHD)

1. Press [TOP MENU].

2. Use [ K/L/s/B] to select an item, then press

[OK].

3. Press [TOP MENU] to exit.

Disc menu (DVD-video)

1. Press [POP MENU / MENU].


[OK].

3. Press [POP MENU / MENU] to exit.

Pop-up menu (BD-video)

This is a special feature available for some BDvideos. When you press [POP MENU / MENU], a menu pops out on the TV screen during playback.

1. During the playback of BD-video, press

[POP MENU / MENU].


[OK].

3. Press [POP MENU / MENU] to exit.

Note

• Contents of menus and corresponding menu operations may vary among discs. Refer to the manual accompanying the disc for details.

• Title menu is also available for SD card with

AVCHD files.

Playing Back (Audio CD / Windows Media TM

Audio / JPEG Files)

Before you begin, make sure the correct media mode is selected. Refer to “Selecting the Media

Mode” on page 16.

1. Insert an audio CD or a disc/card with WMA /

JPEG files.

2. Use [ K/L] to select a desired track, folder or file, then press [OK]. Use [ s/B] to go back and forward between the hierarchies (only for WMA/JPEG files).

• If you press [OK] on the desired file, playback will start.

1

- - / 20

File List

JPEG_DISC

Folder_1

Folder_2

Folder_3

JPEG_A

JPEG_B

JPEG_C

JPEG_D

Page Up Page Down

JPEG files

2 3 4 5 6

1 audio CD: Track information

WMA/JPEG: File information

2 audio CD: “CD-DA” will be displayed.

WMA/JPEG: Current Disc or folder name will be displayed.

3 audio CD: List of the track number and time.

WMA/JPEG: List of the file / folder names in the

4 Operation guide: current folder / disc

Press [RED] to go to the previous page. Press [GREEN] to go to the next page.

6 Current page / Total page number

7 Playback status

Icons:

Folder audio CD tracks

WMA files

17

3. Press [ C (stop)] to stop playback.

It is recommended that files to be played back in this unit are recorded under the following specifications:

<Windows Media™ Audio>

• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz

• Constant bit rate : 48 kbps - 192 kbps

<JPEG>

• Upper limit : 2,560 x 1,900 dots (sub sampling is 4:4:4)

5,120 x 3,840 dots (sub sampling is up to 4:2:2)

32 x 32 dots • Lower limit :

• File size of image maximum : 12 MB

Note

• Unrecognizable characters will be replaced with asterisks.

• Some unplayable folders or files may be listed due to the recording status.

• High-resolution JPEG files take longer to be displayed.

• Progressive JPEG files (JPEG files saved in progressive format) cannot be played back in this unit.

• The system can recognize up to 255 folders /

999 files for CD, 999 folders / 9,999 files for BD,

DVD and SD Memory Card.

• The 9th and deeper hierarchies cannot be displayed for CD. The 10th and deeper hierarchies cannot be displayed for BD, DVD and SD Memory Card.

• For the SD Memory Card playback, refer to

“Reading the SD Memory Card” on page 16.

• Extension other than listed below cannot be recognized.

- WMA : “.wma”

- JPEG : “.jpg”/”.jpeg”

• With regard to the multi-border BD-RE/-R, additionally recorded sections cannot be recognized.

• With regard to the multi-border DVD-RW/-R, additionally recorded sections may not be recognized.

• If a disc contains AVCHD files, the playback of other files on the same disc are not available. All files on an SD Memory Card are available.

KODAK Picture CD

This unit can also run JPEG files stored on KODAK

Picture CD. You can enjoy picture images on the

TV set by playing back the KODAK Picture CD. This unit conforms to ver.7.0 of KODAK Picture CD. For details of KODAK Picture CD, contact a shop that provides developing service of Kodak Inc.

1. When KODAK Picture CD is inserted in this unit, KODAK Picture CD menu will appear automatically on the TV screen.

1 4

- - / 16

Thumbnail

Pictures

Page Prev Page Next

2 3

1 File information


3 Operation guide: Press [BLUE] to go to the previous page.

Press [YELLOW] to go to the next page.

4 Playback status

2. Use [ K/L/s/B] to select a desired file to be played back, then press [ B (play)] or [OK].

• An image will be played back from the selected file and go to the next one in turn.

3. Press [ C (stop)] to stop playback.

To return to the first item:

Press [TOP MENU].

To return to the file played last:

Press [POP MENU / MENU].

Tips for JPEG / KODAK Picture CD Playback

• The selected file will be played back and go to the next file in the current hierarchy in turn every 10 seconds.

• Every press on [ANGLE] will turn the image clockwise by 90 degrees when an image is displayed.

• To change the visual effect for switching the playback image, press [MODE] once, then use

[ s/B] or [OK] to switch between “Cut In/Out” and “Fade In/Out”.

• During JPEG / KODAK Picture CD playback, press [MODE] twice to change the size of the playback image, then use [ s/B] or [OK] to switch between “Normal” (100 %) and “Small”

(95 %). The size change may have no effect on some files (e.g. files with a small picture size).

18

Fast Forward / Fast Reverse

1. During playback, press [ D (forward)] repeatedly for fast forward.

During playback, press [ E (reverse)] repeatedly for fast reverse.

Every time you press [ D (forward)] or

[ E (reverse)], the playback speed will change.

2. Press [ B (play)] to return to normal playback.

Note

• For BD and DVD and AVCHD, speed changes in

5 different levels.

• For audio CD and Windows Media TM Audio, speed changes in 3 different levels.

• For audio CD, fast forward / fast reverse search between different tracks are not available during program and random playback.

• For Windows Media™ Audio, fast forward / fast reverse search between different files are not available.

Slow Forward Playback

1. During playback, press [ F (pause)], then press [ D (forward)].

Every time you press [ D (forward)], playback speed will change.


Note

• For BD and DVD, speed changes in 3 different levels.

• Only slow forward is available.

• Set “Still Mode” setting to “Field” in “Video” menu if pictures in the slow forward playback mode are blurred. Refer to “Still Mode” on page 30.

Step by Step Playback

1. In pause mode, press [ F (pause)] repeatedly.

Every time you press [ F (pause)], playback will advance one step at a time.


Note

• Only step by step forward is available.

• Set “Still Mode” setting to “Field” in “Video” menu if pictures in step by step playback mode are blurred. Refer to “Still Mode” on page 30.

Repeat Playback

Available repeat functions vary depending the discs.

1. During playback, press [REPEAT] repeatedly to select the desired repeat mode.

Repeat mode

Chapter repeat

The current chapter will be played back repeatedly.

Title repeat

The current title will be played back repeatedly.

Track repeat

The current track will be played back repeatedly.

Group repeat

The current folder will be played back repeatedly.

All repeat

All tracks or files in the media will be played back repeatedly.

Available media

BD-video

DVD-video

AVCHD files

BD-video

DVD-video

AVCHD files audio CD

WMA file

WMA file

JPEG file audio CD

WMA file

JPEG file

Note

• The repeat setting will be canceled when you stop playback.

• The chapter, title, track or group repeat will be cleared when moving to another chapter, title, track / file or folder.

• Chapter and title repeat are not available with some scenes.

• When the repeat setting is set for a WMA folder

(file), the repeat setting will be canceled if you select other WMA folder (file) to playback.

Program Playback

You can play back the disc/card in your desired order.

1. In stop mode, press [MODE].

2. Use [ K/L] to select a track / folder / file, then press [OK].

1 2 3 4 5 6

- - / 16

Program

CD_DA

8

9

10

11

12

13

14

0:36

1:14

0:45

0:50

0:53

0:20

0:54

2 / 3

Page Up Page Down

Total 0 : 26 : 24

2

4

9

11

12

14

8

1:14

0:50

1:14

0:50

0:53

0:54

0:36

2 / 3

Page Prev Page Next e.g.) audio CD



7

8

19


WMA/JPEG: Current Disc, SD Memory

Card, or folder name will be displayed.

3 Track /

Folder / File list:

Track / Folder / File list in the original order

4 Programmed Track / File list in the list : programmed order

5 Cumulative playback time of all tracks in the programmed list (audio CD only)

6 Playback status


8 Operation guide:

Press [RED] to go to the previous page in the track / file list.

Press [GREEN] to go to the next page in the track / file list.

Press [BLUE] to go to the previous page in the programmed list.

Press [YELLOW] to go to the next page in the programmed list.

• For WMA/JPEG files, use [ K/L] to select a folder, then press [OK] first, and then use [ K/L] to select a file, then press [OK].

• Press [CLEAR] to erase the last file of the program.

• Use [ K/L] to select “All Clear” at the bottom of the list to erase all the tracks / files in the program.

• The programmed tracks / files is displayed in the right hand screen.

• Use [ s/B] to go back / forward between the hierarchy of folders.

3. Press [ B (play)] to start program playback.

• The program playback will start.

To exit from the program playback mode:

• Press [RETURN] in stop mode.

Note

• During program playback, press [ C (stop)] once to set the resume point, and then press

[ B (play)] to resume program playback from where [ C (stop)] was pressed (audio CD) or from beginning of the file where [ C (stop)] was pressed (WMA/JPEG).

• During program playback, press [ C (stop)] twice to display the program screen. To go back to the normal program playback, press [RETURN] to exit from the program screen, then press

[ B (play)].

• Up to 99 tracks / files can be entered.

• To repeat the current track / file in the program, press [REPEAT] repeatedly until “ Track” appears during playback. To repeat the entire program, press [REPEAT] repeatedly until

“ All” appears during playback.

20

• Playback from a desired track / file and random playback are not available during program playback.

• Press [MODE] to switch to the random playback mode.

• The program will be cleared when;

- the unit is turned into the standby mode.

- the media mode is switched to the other mode.

- the disc / card is removed. (as for “Disc” mode, just opening the disc tray will clear the program info.)

Random Playback

This function shuffles the playback order of tracks

/ files.

1. In stop mode, press [MODE] twice.

1 2 3 4 5 6

- - / 16

Random

CD_DA

3

4

5

6

7

1

2

0:36

1:14

0:45

0:50

0:53

0:20

0:54

Total 1 : 13 : 29

1 / 3

Page Down




3

WMA/JPEG: Current Disc, SD Memory

Card, or folder name will be displayed.

Track / File list:

4 Operation guide:

Track / File list in the original order will be displayed.

Press [RED] to go to the previous page in the track / file list.

Press [GREEN] to go to the next page in the track / file list.

5 Total playback time of all tracks (audio CD only)

6 Playback status

2. Press [ B (play)] to start random playback.

To exit from the random playback mode:

• Press [MODE] in stop mode.

Note

• During the random playback, press [ C (stop)] once to set the resume point, and then press

[ B (play)] to resume random playback from where [ C (stop)] was pressed (audio CD) or from beginning of the file where [ C (stop)] was pressed (WMA/JPEG).

• To repeat the current track / file in the random selection, press [REPEAT] repeatedly until

“ Track” appears during playback. To repeat the entire random selection press [REPEAT] repeatedly until “ All” appears during playback.

• Playback from a desired track / file is not available during random playback.

• In stop mode, press [RETURN] to switch to the program playback mode.

Rapid Playback

This function plays back approximately at 1.3 times the normal playback while keeping the sound output. This function is available only on discs recorded in the Dolby Digital format.

1. During playback, press [MODE] repeatedly until the Rapid playback setting appears.

Off

2. Press [OK] or [ s/B] to switch (1.3x), or “Off”.

“Off” : Plays back in normal speed.

“ ”: Plays back approximately at 1.3 times of normal playback.


Note

• Picture adjustment and audio language setting cannot be changed during this function.

• Virtual surround does not work during this function.

• This function may not work at some points on a disc.

• During this function, 2ch LPCM will be output from HDMI OUT jack and DIGITAL OUT jack.

Adjusting the Picture

You can adjust the picture quality.

1. During playback, press [MODE] repeatedly until appears.

2. Use [ K/L] to select your desired item, then use [ s/B] to adjust the setting.

Black Level

Noise Reduction

On

Off e.g.) DVD-video

 Black level

You can adjust the black level setting to make the black parts of the pictures as bright as you prefer.

You can select “On” or “Off”.

“On” :Makes the dark parts brighter.

“Off” :Shows the original picture as recorded.

 Noise reduction (DVD-video only)

Reduces the noise of the playback picture.

“Off” :Shows the original picture as recorded.

“1” : Executes 3D noise reduction which detects and deletes the noise by comparing each picture frames.

“2” : Executes MPEG noise reduction which reduces the block noise and mosquito noise on the subtitle on movie.

“3” : Executes both MPEG noise reduction and

3D noise reduction.

3. Press [RETURN] to exit.

Note

• The setting will remain the same even if the unit is turned to the standby mode.

• “Black Level” is not effective under the following conditions.

- When the picture is output from HDMI OUT jack.

• You cannot adjust the setting during rapid playback.

Virtual Surround

You can enjoy stereophonic virtual space through your existing 2 channel stereo system.

1. During playback, press [MODE].

2. Use [ K/L] to select your desired setting.

Off

“Off” :No surround effect

“1” :Natural surround effect

“2” :Stronger surround effect

3. Press [RETURN] to exit.

Note

• Set the virtual surround setting to “Off” or lower the volume if the sound is distorted.

• Virtual surround does not function during rapid playback.

• For the virtual surround, audio signal will always be 2-channel LPCM.

21

PIP (BONUSVIEW) Setting

Some BD-videos have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [MODE] whenever the scene contains the secondary video.

primary video secondary video

1. During playback, press [MODE] repeatedly until the PIP function appears.

2. Use [ K/L] to select the secondary video you want.

• The secondary video will be displayed and the secondary audio will be output.

• Use [ s/B] to switch between current setting and “Off”.

3. Press [RETURN] or [MODE] to remove the PIP information.

Note

• The secondary audio will not be output when the secondary audio is set to “Off” or when “BD

Audio Mode” is set to “HD Audio Output”. Refer to “Switching Audio Soundtrack” on page 24 and

“Setting the BD Audio Mode” on page 24.

Camera Angle

Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You can change the camera angle when appears on the TV screen.

1. During playback, press [ANGLE].

• The selected angle will be displayed on the display bar at the top of the TV screen.

2. Use [ K/L] to select your desired angle.

1 / 3

Note

• If “Angle Icon” setting is “Off” in “Others” menu,

will not appear. Refer to page 36.

Enjoying BD-Live Discs with Internet

You can enjoy BD-Live which enables you to use interactive features when the unit is connected to the Internet. (For network connection, refer to page 39.) Examples of BD-Live features:

• Online access to additional content such as movie trailers, subtitles, BD-Java applications, etc.

• While downloading, special video data may be played back.

 How to Activate the BD-Live Function

1. Insert the disc with BD-Live function.

2. Insert an SD card with enough capacity. (SD card of 1GB or more is recommended.)

• Make sure to use the SD card with the supported file system. (Refer to “Reading the

SD Memory Card” on page 16.)

3. Press [TOP MENU] to access the disc menu.

4. Select “BD-Live”, then press [ B (play)] or

[OK].

• Make sure the SD card is correctly inserted, and do not remove the card during playback.

• Service and functions differ depending on the disc. Follow the instructions given by the disc when using the BD-Live function.

Note

• You must connect the unit to the Internet and set up necessary settings in order to use BD-

Live.

• For certain discs, “BD-Live Setting” may need to be changed.

• Depending on your connection environment, it may take time to connect to the Internet or the

Internet may not be connected.

• When BD-Live functions are used and the unit is connected to the Internet, you may be charged for this communication.

• While connecting to BD-Live, sometimes it can take awhile before the next page is downloaded or refreshed.

• Some discs with BD-Live function require memory when playing back the content. If you cannot play back a disc with BD-Live function, insert an SD card(1GB or more) which is formatted on this unit.

Note for AACS Online

• The player or disc IDs may be sent to the content provider when playing back a disc with

BD-Live function.

• If you save your viewing history on the server by using these IDs, you will be introduced to other similar movies.

• You can save game score histories.

22

Search

 Using [ H/G (skip)]

1. During playback, press [ G (skip)] to move to the next track / title / chapter / file. Press it repeatedly to skip to subsequent tracks.

Press [ H (skip)] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks.

• For JPEG files, press [ H (skip)] to go back to the previous file.

Note

• For BD and DVD, if title contains no chapters,

[ H/G (skip)] changes the title.

• For JPEG files, [ s/B] is also available.

 Using [SEARCH]

By using [SEARCH], you can select the following search modes.

Search mode

/

Chapter / Title search

Track search

Time search

Available media

BD-video

DVD-video

AVCHD file audio CD

WMA file

JPEG file

BD-video

DVD-video audio CD

AVCHD file

1. During playback, press [SEARCH] repeatedly until your desired search mode appears.

2. Enter the desired chapter, title, track, file number or time to search for using

[the Number buttons].

• Chapter, title, track or time search will start.

• Press [CLEAR] to erase an incorrect input.

Note

• During program and random playback, search functions are not available except the search using [ H/G (skip)].

• Time search is available only in the same track, file or title.

• For BD / AVCHD, chapter and time search are available only during playback.

Using [the Number buttons] (Direct Search)

 Title search

In stop mode, enter the title number you want to search using [the Number buttons].

Playback of the title will start in a few seconds.

 Chapter search

During playback of a title, enter the chapter number you want to search using

[the Number buttons].

Playback of the chapter will start in a few seconds.

 Track / file search

Enter the track / file number you want to search using [the Number buttons].

Playback of the track / file will start in a few seconds.

Note

• As for the BD-video, how it performs will be strongly determined by the disc, and may not perform as described here.

Switching Subtitles

Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle languages during playback.

1. During playback, press [SUBTITLE].

2. Use [ K/L] to select “Primary Subtitle”,

“Secondary Subtitle” or “Subtitle Style”, then press [OK].

Primary Subtitle 2 /11

Secondary Subtitle

Subtitle Style

2

2/25

ENG /11

“Primary Subtitle” : Sets the subtitle for the primary video.

“Secondary Subtitle” : Sets the subtitle for the secondary video.

“Subtitle Style” : Sets style of the subtitle.

3. Use [ K/L] to select your desired subtitle or style.

• Use [ s/B] to switch between current subtitle setting and “Off”.

4. Press [SUBTITLE] to exit.

1. During playback, press [SUBTITLE].

2. Use [ K/L] to select your desired subtitle.

• Use [ s/B] to switch between current subtitle setting and “Off”.

1

3. Press [SUBTITLE] to exit.

23

Note

• Some discs will only allow you to change the subtitles from the disc menu or pop-up menu.

Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu.

• If 4-digit-language code appears in the subtitle menu, refer to “Language Code List” on page 48.

• If the disc has no subtitle language or subtitle style, “Not Available” will be displayed on the TV screen.

• During playback of the secondary video, the primary subtitle setting is not available except when there is no subtitle for the secondary video.

• If you select a language that has a 3-letterlanguage code, the code will be displayed every time you change the subtitle language setting.

If you select any other languages, “---” will be displayed instead. (Refer to page 48.)

Switching Audio Soundtrack

When playing back video material recorded with

2 or more soundtracks (these are often in different audio languages or audio formats), you can switch them during playback.

1. During playback, press [AUDIO].

2. Use [ K/L] to select “Primary” or “Secondary” audio to set, then press [OK].

Primary

1 ENG

Secondary

2 ENG

Dolby D Multi-ch /3

Dolby D+ Multi-ch /3

“Primary” : Sets the audio for the primary video.

“Secondary” : Sets the audio for the secondary video.

3. Use [ K/L] to select your desired audio stream channel.

• For “Secondary”, use [ s/B] to switch between current audio setting and “Off”.

4. Press [AUDIO] to exit.

1. During playback, press [AUDIO].

2. Use [ K/L] to select your desired audio stream channel.

1 48k / 3

• For audio CD, you can select following options.

“Stereo” : Both right and left channels are active (stereo).

“L-ch” : Only left channel is active.

“R-ch” : Only right channel is active.

3. Press [AUDIO] to exit.

Note

• The secondary audio will not be output when the secondary video is not displayed or when

“BD Audio Mode” is set to “HD Audio Output”.

(For some BDs, secondary audio will be output even when secondary video is off.)

• The sound mode cannot be changed during playback of discs not recorded in multiple audio.

• Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the discs. Refer to the manual accompanying the disc.)

• [AUDIO] may not work on some discs with multiple audio streams or channels (e.g. DVDs that allow changing audio setting on the disc menu).

• If you select a language that has a 3-letterlanguage code, the code will be displayed every time you change the audio language setting.

If you select any other languages, “---” will be displayed instead. (Refer to page 48.)

• Audio Language selection cannot be made during rapid playback. (Refer to page 21.)

• If 4-digit-language code appears in the audio menu, refer to page 48.

• If the disc has no audio language, “Not

Available” will be displayed on the TV screen.

• For DTS-CD (5.1 music disc), selecting audio streams or channels is not available.

Setting the BD Audio Mode

There are 2 options for the “BD Audio Mode” setting; either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio. Depending on the setting of the mode,

Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

DTS, or DTS-HD output changes between multi

LPCM and Bitstream.

1. In stop mode with BD inserted, press

[MODE].

2. Use [ K/L] to select your desired setting.

BD Audio Mode Mix Audio Output

“Mix Audio Output”:

If it is available, BD-video’s secondary and interactive audio will be output with the primary audio.

• The secondary audio is the audio for the secondary video (Director’s comment etc.) and the interactive audio is the audio for the interactive application (Button click sounds etc.).

“HD Audio Output”:

Only the primary audio will be output. Set this mode in order to output , Dolby Digital Plus,

Dolby TrueHD, or DTS-HD audio of BD through

HDMI connection.

24

3 Press [RETURN] to exit.

• You can also set “BD Audio Mode” from the setup menu. Refer to page 31.

Note

• In “Mix Audio Output” mode, if there is no secondary and interactive audio, the audio will be output as “HD Audio Output” mode.

NETWORK OPERATIONS

Netflix Operations

With this unit, you can watch movies and TV episodes streamed instantly from Netflix (version

1.6) via the Internet. In order to use this feature, you must visit the following website on your PC and become a Netflix member. netflix.com/MAGNAVOX

Before Activating the Connection to Netflix

After creating a Netflix account at netflix.com/

MAGNAVOX, follow the following procedure before activating the connection to Netflix.

1. Connect this unit to the Internet.

• Refer to “Connection to the Network” on page 12.

2. Set up the necessary network connection settings.

• Refer to “Network Connection” on page 39.

Activating the Connection to Netflix

In order to watch movies and TV episodes streamed instantly from Netflix via the Internet, you must activate the connection between this unit and your Netflix account.

1. Press [GREEN] while opening screen is displayed.

• For opening screen, refer to page 9.

• Netflix welcome screen will appear.

• For the first time only, “Network Service

Disclaimer” screen will appear. After confirming the content, use [ s/B] to select

“Agree”, then press [OK].

2. Use [ K/L] to select “yes - activate instant streaming from Netflix”, then press [OK].

• Activation screen with the activation code will appear.

4. Enter the activation code which is displayed on the TV screen.

• The instant Queue will appear. The connection to Netflix is successfully made.

• To browse the instant Queue and watch movies, skip to step 2 in “Watching Streaming

Movies” on page 25.

Note

• Netflix is available only in the United States.

• You cannot create a Netflix account on this unit.

• If newer version of software is required, software update screen may appear after selecting “NETFLIX” in step 1. (For software update, refer to “Software Update” on page 43.)

• You can deactivate the connection to Netflix by setting “Netflix Deactivate” to “Yes”. (Refer to page 44.)

• The screen image of Netflix may change after updating the firmware.

• For questions regarding the Netflix service, visit netflix.com/Help

• When you contact the Netflix customer service, you may be asked for the ESN number, which is a serial number to identify this unit by Netflix.

You can check the ESN number on the bottom of the “Netflix Deactivate” screen. (Refer to page

44.)

Watching Streaming Movies

After you set up the connection to Netflix, you can browse the instant Queue and watch movies on your TV.

1. Press [GREEN] while opening screen is displayed.

For opening screen, refer to page 9.

The instant Queue will appear.

2. Use [ s/B] to select the desired movie or

TV episode, then press [ B(play)] to start playback.

3. On your PC, visit netflix.com/activate and log into your account.

• The entry screen of activation code will appear on your PC screen.

• After loading, playback of the selected movie or TV episode will start.

• To stop the playback, press [ C(stop)].

• To go back to the instant Queue, press [RED].

• To go back to the opening screen, press

[TOP MENU] or [SETUP].

About the Instant Queue

• Instant Queue is the list of movies and TV episodes you add on the Netflix website

(netflix.com). You can manage the movies and

TV episodes in your instant Queue from the

Netflix website on your PC.

25

• You cannot add movies or TV episodes to your instant Queue on this unit.

• You can remove movies or TV episodes from the instant Queue on this unit.

Note

• The picture quality differs depending on the speed of your Internet connection at the time of loading.

Blockbuster Operations

With this unit, you can watch movies and TV episodes streamed instantly from Blockbuster via the Internet. In order to use this feature, you must visit the following website and create a

Blockbuster account.

- For Blockbuster, visit www.blockbuster.com/auth/login

Before Activating the Connection to

Blockbuster

After creating a Blockbuster account, follow the following procedure before activating the connection to Blockbuster.


• Refer to “Connection to the Network” on page

12.



Activating the Connection to Blockbuster

In order to watch movies and TV episodes streamed instantly from Blockbuster via the

Internet, you must activate the connection between this unit and your Blockbuster account.

1. On your PC, visit following website and log into your account to get the activation code.

• Follow the instruction given by the website.

• Take a note of the activation code which appears on the PC.

- For Blockbuster, visit www.blockbuster.com/magnavox

2. On this unit, press [BLUE] while opening screen is displayed.


• Menu screen of Blockbuster will appear.




3. Use [ s/B] to select “Configure”, then press

[OK].

• Activation code input screen will appear.

5 Configure :

Configure

Activate this device on your BLOCKBUSTER account.

To get started, please visit www.blockbuster.com/activate/

4. Enter the activation code displayed on your

PC using [ s/B] and [the Number buttons], then select “Activate” and press [OK].

Note

• The image of menu screen may change after updating the firmware.

• You cannot create Blockbuster account on this unit.

• To deactivate the connection to Blockbuster, select “Deactivate” in “Configure”.

• For questions regarding Blockbuster service, visit www.blockbuster.com/help

Guide to Blockbuster Menu Screen

Blockbuster

1 Browse :

2 Search:

3 My Library :

4 My Favorites :

My Library My Favorites Configure

3

Use the numbers on your remote control.

Activate

1

Browse

4

2

Search

Help

5 6

To access the movie list

To access search screen

To access the list of rented or purchased movies / TV episodes

To access your favorite list

To access configure menu

To access the help page 6 Help :

Renting or Purchasing Movies / TV Episodes

After you set up the connection to Blockbuster, you can rent or purchase movies / TV episodes and watch directly on your TV.

1. Press [BLUE] while opening screen is displayed.


2. Use [ K/L/s/B] to select “Browse”, then press [OK].

• List of movies / TV episodes will appear.

26

3. Use [ K/L/s/B] to select the desired title, then press [OK].

• Title details screen of the selected title will appear.

4. Use [ s/B] to select “Rent” or “Buy”, then press [OK].

• Checkout screen will appear.

5. Use [ s/B] to select “Submit Order”, then press [OK].

6. Use [ s/B] to select “Play Now”, then press

[OK].

• If you want to continue browsing, select

“Continue Browsing” and press [OK] to go back to “Browse”.

Note

• If you select “Add to My Favorites” in title details screen, the title will be added to your “My

Favorites”.

• In most cases, rented movies or TV episodes are available for 24 hours from the playback starting time.

Searching Movies / TV Episodes

From the search screen, you can search for movies

/ TV episodes by entering search words.

1. Follow step 1 in “Renting or Purchasing

Movies / TV Episodes” on page 26.

2. Use [ K/L] to select “Search”, then press [OK].

• Keypad screen will appear.

3. Use [ K/L/s/B] to select characters, then press [OK].

• When you enter a letter, titles that start with the letter will be displayed on the right side of the screen.

4. Use [ K/L/s/B] to select a desired title from the search result on the right side of the screen, then press [OK].

• Title details screen of the selected title will appear.

Watching Rented or Purchased Movies / TV

Episodes

1. Follow step 1 in “Renting or Purchasing

Movies / TV Episodes” on page 26.

2. Use [ K/L/s/B] to select “My Library”, then press [OK].

• List of rented or purchased movies / TV episodes will appear.

3. Use [ K/L/s/B] to select a desired title, then press [OK].

4. Use [ s/B] to select “Play Now”, then press

[OK].

• If you want to resume playback, select “Resume

Play” and press [OK].

• To stop the playback, press [ C(stop)].

• To pause the playback, press [ F(pause)].

• To go back to the opening screen, press

[TOP MENU] or [SETUP].

Note

• Depending on your network environment and speed, the playback may be paused or stopped.

To improve playback condition, use high speed broadband Internet connection (For details, contact your Internet service provider.)

VUDU Operations

With this unit, you can enjoy VUDU HD ondemand movies / TV episodes and Internet applications.

- For complete instructions on using VUDU service, please visit www.vudu.com/docs to view an updated in-depth online manual.

Before Activating VUDU

Follow the following procedure before activating

VUDU.


• Refer to “Connection to the Network” on page

12.

• Broadband Internet connection of 8 Mbps or faster is recommended.



Activating VUDU

After you set up the network connection, you must set up a VUDU account and activate this unit before watching VUDU movies.

1. Press [RED] while opening screen is displayed.


• VUDU App Home screen will appear.




2. Use [ K/L/s/B] to select “VUDU movies”, then press [OK].

• VUDU welcome screen will appear.

3. Select “SIGN Up Now”, then press [OK].

4. Enter the e-mail address you would like associated with your VUDU account. After you enter your e-mail address correctly, select “Done” and press [OK].

• Activation e-mail will be sent to the e-mail address. (You must have access to the e-mail address to activate VUDU.)

5. Follow directions in the activation e-mail to complete your account activation.

Note

• You can deactivate the connection to VUDU by setting “Vudu Deactivate” to “Yes”. (Refer to page 44.)

• For questions regarding VUDU service, please contact VUDU Customer Care at

1-888-554-VUDU (8838) or visit www.vudu.com/support

27

Guide to VUDU Menu Screen

 App Home Screen

App Home screen is the entry point to VUDU applications including VUDU movies. To call up the screen, press [RED] while opening screen is displayed.

2

Most Popular

1

Most Popular

Newest

Browse by Genre

My Favorites

1. Viewing mode : List of different viewing modes for App Home

2. Promotional graphics : applications

Placeholder where promotional graphics are displayed

3. Application list : Grid of applications in the selected viewing mode

 VUDU Movies Home Screen

When you select “VUDU movies” in App Home screen, VUDU movies home screen will appear.

1 2 3 4

3

1. Most Watched : To access the list of popular movies / TV episodes on

VUDU

2. New on Vudu : To access the list of newly available movies /TV episodes

3. Explore Catalog : To access the list of options to search movies / TV episodes

4. My Vudu : To access the list of rented or purchased contents

Note

• You can go back to VUDU movies home screen by pressing [BLUE] while you are using VUDU movies features.

Renting or Purchasing VUDU Movies / TV

Episodes

After activating this unit, you are ready to purchase or rent movies / TV episodes and watch directly on your TV.

1. Press [RED] while opening screen is displayed.


2. Use [ K/L/s/B] to select “VUDU movies”, then press [OK].

• VUDU movies home screen will appear.

3. Use [ K/L/s/B] to select “Most Watched” ,

“New on Vudu” or “Explore Catalog”, then press [OK].

4. Use [ K/L/s/B] to select the desired movie or TV episode, then press [OK].

• “MOVIE DETAILS” screen will appear.

5. Use [ K/L] to select “Rent” or “Own”, then press [OK].

6. Use [ K/L] to select a desired quality option, then press [OK].

• Select the quality option that best suits your network environment.

Video Resolution Minimum Bit Rate

SD 480p 1 Mbps

HD 720

HDX 1080p

2.25 Mbps

4.5 Mbps

7. Use [ K/L] to select “Rent for $*.**” or “Buy for $*.**”, then press [OK] to confirm your rental or purchase.

8. Select “Watch Now” to start playing the movie / TV episode.

• If you want to return to the “MOVIE DETAILS”, select “Watch Later”.

Note

• Available quality options differ depending on the content.

28

Watching Rented or Purchased VUDU Movies /

TV Episodes

1. Follow steps 1 to 2 in “Renting or Purchasing

VUDU Movies / TV Episodes” on page 28.

2. Use [ s/B] to select “My Vudu”, then press

[OK].

3. Use [ s/B] to select “My Rentals”, “My

Movies” or “My TV Shows”, then press [OK].

4. Use [ K/L] to select a desired movie / TV episode, then press [OK].

5. Select “Watch ***” to start watching the movie / TV episode.

• During playback, use following buttons to control the playback.

Button

[ F(pause)]

[ C(stop)]

[

E(reverse)] /

[ D(forward)]

[ B(play)]

[YELLOW]

[TOP MENU]

Action

Pause the playback.

Stop the playback.

Fast reverse or forward the playback.

Resume the playback.

Display the info banner which shows the playback information.

Go back to opening screen.

Note

• Available buttons and actions may subject to change without notice.

Using Internet Applications

In addition to VUDU movies, you can use various kinds of Internet applications.

1. In App Home screen, use [

K/L/s/B] to select a desired application and press [OK].

2. Follow the instructions on screen of the selected application.

Note

• Available applications may change without notice.

FUNCTION SETUP

In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback.

Setting items displayed in gray indicates they are not available under the conditions at the time.

Quick

“ Quick” menu contains setting items extracted from “ Custom” menu which may be used frequently.


2. Use [ K/L] to select , then press [OK].

3. Use [ K/L] to select your desired setting items.

Quick

Mode Select Disc

HDMI Audio Out HDMI Multi(Normal)


Player Menu


English

Wired

4. Follow the procedure below depending on the setting items.

A) If “ B” does not appear on the right side of the setting items when you select the items:

Press [OK] repeatedly to change options.

B) If “ B” appears on the right side of the setting items when you select the items:

1) Press [OK].

2) Use [ K/L] to select options, then press

[OK].

• Use [ s] or [RETURN] to go back to the previous screen.


29

Custom

“ Custom” menu contains all the setting items.


2. Use [

K/L] to select , then press [OK].

3. Use [ K/L] to select your desired setting category, then press [OK].

: Language

: Video

: Audio

: Parental

: Others

• For “Parental” menu, follow the procedure on page 35.

4. Use [

K/L] to select your desired setting items.

5. Follow the procedure below depending on the setting items.

A) If “

B” does not appear on the right side of the setting items when you select the items:

Press [OK] repeatedly to change options.

B) If “ B” appears on the right side of the setting items when you select the items:

1) Press [OK].

2) Use [

K/L] to select options, then press

[OK].

• Use [ s] or [RETURN] to go back to the previous screen.


Language

Language

Audio Original

Subtitle Off

Disc Menu

Player Menu

English

English

• To select the setting items and options, refer to

“ Custom” on page 30.

• “ Quick” menu consists of the setting menus frequently used, and they are accompanied with .

Setting items

Audio

Subtitle

Disc Menu

Player Menu *1

Descriptions

Sets the language for audio.

Sets the language for subtitle.

Sets the language for disc menu or pop-up menu.

Sets the language for on-screen display.

*1) “Auto” for “Player Menu” activates the Get & Set

Menu Language function. Refer to page 38.

- “Auto” is available only when “fun-Link (HDMI

CEC)” is set to “On”.

30

- inside the parentheses next to “Auto” will be the language which is currently selected by your TV.

• For “Audio”, “Subtitle”, and “Disc Menu”, if you select “Other”, enter the 4-digit-number code for the desired language. (Refer to “Language Code

List” on page 48.) Only the languages supported by the disc can be selected.

Video

Video

TV Aspect 16:9 Wide


HDMI Deep Color

Progressive Mode

Still Mode

Auto

Auto

Auto




Setting items

TV Aspect

Descriptions

Sets the picture size according to aspect ratio of the connected

TV.

HDMI Video Resolution Sets the HDMI video resolution.

HDMI Deep Color

Progressive Mode

Still Mode *1

Sets whether to output the picture from HDMI

OUT jack with Deep

Color or not.

Sets the optimum progressive mode for the image material output from HDMI OUT jack.

Adjusts picture resolution and quality in still mode.

*1) An individual picture on the TV screen is called

“Frame”, which consists of two separate images called “Field”. Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics.

Note for “HDMI Video Resolution”

• Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output.

• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

• You cannot change the video resolution during playback of Blu-ray Discs or AVCHD files. To change the resolution, stop playback.

• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI cable is recommended) and select “Auto” if the connected TV is compatible with 1080p24 frame input.

• Even if the connected TV is compatible with

1080p24 frame input and you set “HDMI Video

Resolution” setting to “Auto”, when the contents of the disc are not compatible for 1080p24 frame, 1080p60 frame will be output.

• If the picture is not output properly to the TV because of “HDMI Video Resolution”, press and hold [ B PLAY] on the front panel for more than

5 seconds. Both settings will be reset to the default automatically.

• For AVCHD, 24-frame film material will be output as 60 frame, even if the connected device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to

“1080p24”or “Auto”.

Audio

Audio

BD Audio Mode

HDMI Audio Out

Mix Audio Output

HDMI Multi (Normal)

Down Sampling On

DRC Auto

Setting items

BD Audio Mode

HDMI Audio Out *1

Down Sampling

DRC

Descriptions

For BD, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to

“Setting the BD Audio

Mode” on page 24.

Sets the audio format for the audio output from HDMI OUT jack.

Refer to page 32.

Sets the digital audio output when playing back BD or DVD recorded in LPCM.

Sets whether to compress the range of sound volume (dynamic range control) when

Dolby Digital, Dolby

Digital Plus or Dolby

TrueHD audio is played back.

When “Auto” is selected,this unit detects DRC setting of the disc and set “DRC” setting to “On” or “Off” automatically when the discs recorded in Dolby

TrueHD format are in playback.

*1) Under following circumstances, “HDMI

Multi(Normal)” and “HDMI Multi(LPCM)” are not available.

- HDMI cable is not connected to HDMI OUT jack.

- Connected TV is off.

- Connected TV is not compatible with audio output.




31

HDMI Audio Out Setting

When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the device to be connected. Refer to page 31. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited to your connected device.

Device to be connected

Device compatible with Dolby

Digital, Dolby Digital Plus, Dolby

TrueHD, DTS or DTS-HD decoding

Device compatible with 3 or more channels of audio inputs (not

Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS or DTS-HD compatible)

HDMI connection to a TV and digital audio connection (coaxial) to an AV amplifier

“HDMI Audio Out” setting

HDMI Multi(Normal)

HDMI Multi(LPCM)

Audio Mute

Output HDMI audio signal

Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, DTS, or DTS-HD bitstream are output from HDMI OUT jack. Make the speaker settings on the connected AV amplifier, etc.

Multi-channel audio signals are output from HDMI OUT jack. Make the speaker settings with the speaker setting items appear after you select “HDMI

Multi(LPCM)”.

HDMI audio will be mute, and Dolby

Digital / DTS bitstream or LPCM will be output from DIGITAL OUT jack depending on “Digital Out” setting.

Note

• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.

• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In connections with device such as this unit, audio signals are not output from HDMI OUT jack.

• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

Digital Out Setting

When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.

Quick  HDMI Audio Out  Audio Mute  Digital Out

Bitstream* :

When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®, the corresponding core stream (Dolby Digital or DTS®) are output.

LPCM :

LPCM signal will be output from DIGITAL OUT jack.

• This setting is not effective when the HDMI audio signal is output.

Note

• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set

“HDMI Audio Out” setting to “HDMI Multi(LPCM)”.

32

Speaker Setting (Available when you have HDMI cable connected to HDMI OUT jack)

This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.

To make the most of its feature, set up your speakers appropriately by referring to the following table.

How to navigate through “HDMI Multi(LPCM)”:

1) Use [ K/L] to select your desired menu item then press [OK].

2) Use [ K/L] to select your setting items.

• Press [RETURN] to go back to the previous screen.

3) Use [ s/B] to select desired options. (Except for “Test Tone”, “Default” and setting options in

“Speaker Size” setting.)

For setting options in “Speaker Size” setting:

Press [OK] to select desired options.

For “Test Tone”:

Use [ s/B] to select “Off”, “Manual” or “Auto”, then press [OK].

• The test tone will be output. If you select

“Manual”, use [ K/L] to select desired speaker, then use [ s/B] to adjust the volume. If you select “Auto”, use [ s/B] to adjust the volume of the speaker that outputs the test tone.

• If you want to stop the test tone, press [RETURN].

For “Default”:

Press [OK] to reset to the default.

4) Press [SETUP] to exit.

Front speaker (left)

Surround speaker (left)

Surround back speaker

(left)

Center speaker

Front speaker (right)

Subwoofer

Surround speaker (right)

Surround back speaker

(right) e.g.) basic layout with 7.1-channel surround system

<Speaker setting for the audio signal output from HDMI OUT jack>

Quick  HDMI Audio Out  HDMI Multi(LPCM)

Custom  Audio  HDMI Audio Out  HDMI Multi(LPCM)

Menu Setting items

Speaker Size

Selects the desired speaker to set. Then change the setting by referring to the descriptions.

Front

Center

Subwoofer

Surround

Surround Back

Default

Descriptions

Large:

For the large speakers with strong low frequency reproduction capabilities.

Small:

For the small speakers which do not provide strong bass sound.

You cannot change the setting of

“Subwoofer”. Speakers which are not supported by the connected device will be displayed in gray.

Select “Default”, then press [OK] to reset

“Speaker Size” setting to the default.

33

Channel Level

Tests or sets the volume for each speaker.

Menu

Delay Time

This is a parameter for optimizing the timing at which the sound outputs from the speakers according to the distance from the listening position.

Setting items

Test Tone:

“Test Tone” is the test tone which can be output from the speakers so you can adjust the volume for each speaker.

Front Lch

Center

Subwoofer

Front Rch

Surround Rch

Surround Back Rch

Surround Back Lch

Surround Lch

Default

Descriptions

Select “Off” to deactivate “Test

Tone”. Select “Manual”, then press

[OK] to manually set the volume for the desired speaker.

Select “Auto”, then press [OK] to automatically output the test tone from each speaker.

If you have selected “Manual” in

“Test Tone”, select the desired speaker to set and adjust the volume for the selected speaker. If you select “Auto” in “Test Tone”, test tone will automatically be output in order. Adjust the volume of the speaker that outputs the test tone.

Distance

Front

Center

Surround

Surround Back

Default

Select “Default”, then press [OK] to reset “Channel Level” setting to the default.

Set the desired measure system.

This measure system will be used for “Delay Time” setting.

Press [OK] to switch the settings.

Select the distance from the listening position to the speaker to get the ideal delay time.

Select “Default”, then press [OK] to reset “Delay Time” setting to the default.

• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and

“Surround Back” to “Large”.)

• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround Back” setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front” and “Center” setting cannot exceed 5 ft (1.5m).

• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot exceed the value of the “Front” setting.

• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed automatically to the setting value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting of “Center”,

“Surround” and “Surround Back” will be changed to 60ft (18m) as well.)

34

Parental

Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc.

Parental

BD Rating Level

DVD Rating Level

Password Change

All

All


2. Use [the Number buttons] to enter your 4-digit password.

For the first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737), then press [OK]. That number will be used as the password from the second time. Record your password in case you forget it.

• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be set to “All”.

• While you input the password, press [CLEAR] to clear the number, then re-enter the password.

3. Proceed to A – C

A) BD Rating Level

1) Use [ K/L] to select “BD Rating Level”, then press [OK].

2) Use [ K/L] to select your desired option, then press [OK].

“All”: To release the limitation.

“Age Setting”: To set the age limitation.

• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254.

(e.g. for age 15, press [0], [1], [5])

3) Press [SETUP] to exit.

B) DVD Rating Level

1) Use [ K/L] to select “DVD Rating Level”, then press [OK].

2) Use [ K/L] to select your desired level, then press [OK].


All:

8 [Adult] : DVD software of any grades (adult / general / children) can be played back.

7 [NC-17] : No one under 18 admitted.

6 [R] :

5 [PGR] :

RATING EXPLANATIONS

Parental Control is inactive; all discs can played back.

Restricted; under 18 requires accompanying parent or adult guardian.

Parental guidance recommended.

4 [PG-13] :

3 [PG] :

2 [G] :

Unsuitable for children under 13.

Parental guidance suggested.

General audience.

1 [Kid Safe] : Suitable for children.

C) Password Change

1) Use [ K/L] to select “Password Change”, then press [OK].

2) Enter a new 4-digit password, then press [OK].


35

Others

Others

Angle Icon fun-Link (HDMI CEC)

Mode Select

Network Connection

Software Update

On

Off

Disc

• To select the setting items and options, refer to “ Custom” on page 30.


• Settings with (*) are the default.

Setting items

Angle Icon

Options / Descriptions

On*:

The angle icon appears on the TV screen when playing back the scene with various angle.

Off:

The angle icon disappears on the TV screen.

On

Off* fun-Link (HDMI

CEC)

Sets whether to utilize the fun-

Link (HDMI CEC) function. Refer to page 38.

Mode Select

Selects the media to playback.

Disc*:

Select this when you play back a disc.

SD Card:

Select this when you play back an SD Memory Card.

Network:

Select this when you use Netflix / Blockbuster / VUDU feature.

36

Setting items

Network

Connection

• Refer to page

39 for more information.

Connection

Test

Network

Selection

Disclaimer

Wired*

Wireless

Disable


Perform a network connection test. After you change IP address or DNS setting, always perform this test.

Easy*

Custom IP Address

Setting

Proxy

Setting

Auto(DHCP)*

Manual IP Address

Subnet Mask

Default

Gateway

DNS Setting Auto(DHCP)*

Manual Primary

DNS

Secondary

DNS

Do Not Use*

Use Proxy Address

Proxy Port

Wireless

Router

Advanced

Settings

If you select “Easy”, connection test will automatically start.

Set the IP address. In most cases, you can connect to the Internet without making any changes to the default setting.

Set the DNS setting. In most cases, you can connect to the

Internet without making any changes to the default setting.

Connection

Speed

Auto*

10BASE Half

10BASE Full

Set the proxy server. In most cases, you can connect to the

Internet without using proxy server.

Set the connection speed. In most cases, you can connect to the Internet without making any changes to the default setting.

BD-Live

Setting

Custom

100BASE Half

100BASE Full

Allow*

Limited Allow

Prohibit

You can restrict Internet access when BD-Live functions are used.

MAC Address

Find wireless network

Manually enter your

SSID

You can check the MAC address.

WEP/WPA Authentication Set up the connection to the wireless router and enter the

WEP/WPA key required for wireless network connection.

Wireless Router Status

Easy*

You can check the current status of the wireless router setting.

If you select “Easy”, connection test will automatically start.

IP Address Setting

DNS Setting

Set the IP address. In most cases, you can connect to the Internet without making any changes to the default setting.

Set the DNS setting. In most cases, you can connect to the

Internet without making any changes to the default setting.

No*

Yes

Proxy Setting

BD-Live Setting

MAC Address

Set the proxy server. In most cases, you can connect to the

Internet without using proxy server.

You can restrict Internet access when BD-Live functions are used.

You can check the MAC address.

Deactivate the network connection.

Displays the network service disclaimer.

37

Setting items

Software Update

Allows you to update this unit’s firmware. Refer to page 43.

Current Version

Indicates the current firmware version.

Disc Update

Allows you to update this unit’s software using a disc.

No*

Yes


Network

Update

You can update the software version by connecting this unit to the Internet.

No*

Yes

fun-Link (HDMI CEC) fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may not work properly depending on a device to be connected. When “fun-Link (HDMI CEC)” setting is set to “On”, functions listed below will be available.

One Touch Play

When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically when you press [ B (play)], [H (skip)], [G (skip)], [the Number buttons], [DISPLAY],

[TOP MENU], or [POP MENU / MENU] when the unit’s power is on. (Buttons other than [ B (play)] works only with discs inserted.)

Standby

When you press and hold [STANDBY/ON y] for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit also.

When the connected fun-Link (HDMI CEC) compatible display device is turned off, this unit may also turn off together.

System Information

Get & Set Menu Language

The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.

• This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu.

(Refer to “Player Menu” on page 30.)

38

Network Connection

[SETUP]

 ”Others"“Network Connection”

Set up network connection settings in order to use BD-Live, Netflix / Blockbuster / VUDU or network update function.

Connection Test

After you enable a network connection or change the network settings, always perform the connection test to check if the connection is correctly made.

1. In “Network Connection” menu, use [ K/L] to select “Connection Test”, then press [OK].

Connection test will start automatically and the test result will appear right after the connection test finishes.

• “Testing...” : The test is in progress.

• “Pass” : Connection test is successfully completed.

• “Fail” : Connection test failed. Check the connection settings.

If the connection test passes, press [OK].

• Confirmation screen of the network selection will appear.

e.g.) Wired connection

Others

Connection Test

Network Selection Wired then press ‘OK’ .

Press [OK] again to display the confirmation screen of network settings.

Others

Connection Test

IP Address

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx

then press ‘OK’ .

2. Press [OK], then press [SETUP] to exit.

Note

• If the connection test passes, you are ready to use BD-Live, Netflix / Blockbuster / VUDU or network update function using the Internet without making any additional settings.

• If the connection test fails, you may need to change the MAC address settings on your router. You can check the MAC address of this unit on “Custom” screen. (Refer to “Custom

(Wired)“ on page 39.)

• When connecting this unit directly to a modem for the first time or connecting it to a modem which was previously connected to any other network device(e.g. a router, PC, etc.), you may have to power cycle the modem to reset the settings on the modem.

• “Connection Test” is not available when

“Disable” is selected in “Network Connection”.


 Wired

Select “Wired” if you made a wired connection and set the setting to “Easy”(wired) or “Custom”(wired), in accordance with your network environment.

<Easy (Wired)>

Network settings are set to the following settings initially. (In most cases, you can connect to the

Internet without making any changes to the default settings.)

- IP Address Setting Auto(DHCP)

- DNS Setting

- Proxy Setting

Auto(DHCP)

Do Not Use

- Connection Speed Auto

- BD-Live Setting Allow

If you want to set the network settings back to the default settings as above (except “BD-Live

Setting”), follow the procedure below.

1. In “Network Connection” menu, use [ K/L] to select “Network Selection”, then press [OK].

2. Use [ K/L] to select “Wired”, then press [OK].

3. Use [ K/L] to select “Easy”, then press [OK].

• The unit will start the connection test automatically and the test result will appear right after the test finishes.

4. Press [OK] to activate the network settings and set the network connection automatically. Press [SETUP] to exit.

Note

• The setting of “BD-Live Setting” will not be set back to the default, even if you follow the procedure.

<Custom (Wired)>

In following cases, select “Custom”(wired) to set each setting as necessary.

- When connection test failed with the setting of “Easy”(wired).

- When instructed by your Internet service provider to make specific settings in accordance with your network environment.

39

To set the network setting to “Custom”(wired), follow the following procedure.

1. Follow steps 1 to 2 in “Easy (Wired)” on page 39.

2. Use [ K/L] to select “Custom”, then press [OK].

- Setting menu of “Custom”(wired) will be displayed.

3. Use [ K/L] to highlight the item you want to set.

• ”MAC Address” is for viewing only and cannot be selected.

4. Find the instruction for the item from the following, and set the item.

IP Address Setting / DNS Setting

1. Press [OK] repeatedly to select the desired setting.

“Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”.

“Manual” : If your router does not have

DHCP server function, select

“Manual”.

If you select “Manual”, follow the following instruction to set the IP address and DNS.

a) Use [ K/L] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [OK]. IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons.

Others

IP Address Setting

IP Address xxx . xxx . xxx . xxx

Subnet Mask xxx . xxx . xxx . xxx

Default Gateway xxx . xxx . xxx . xxx then press ‘OK’

• Enter the IP address number after checking the specifications of your router.

• If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and assign a different number from those of other devices.

b) After you enter all correctly, press [OK].

• Confirmation message will appear. Select

“Yes” to complete the settings.

Others

IP Address Setting

Is Setting OK?

IP Address

Subnet Mask

Default Gateway xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx

No

Yes c) Use [ K/L] to select “Primary DNS” or “Secondary

DNS”, then press [OK]. DNS setting screen will appear. Enter primary DNS and secondary DNS with cursor buttons and number buttons.

Others

DNS Setting

Primary DNS

Secondary DNS xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx then press ‘OK’

• Enter the DNS addresses provided by your

Internet provider.

• If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address.

d) After you enter all correctly, press [OK].



2. Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.

Note

• The range of input numbers is between 0 and

255.

• If you enter a number larger than 255, the number will automatically be 255.

• The manually entered addresses will be saved even if you change the setting to “Auto(DHCP)”.

• When you enter a wrong number, press [CLEAR] to cancel. (The number will be back to “0”.)

• If you want to enter 1 or 2 digit number in one cell, press [ B] to move on to the next cell.

• If the entered IP address or the default gateway or primary DNS addresses is same as the default setting, IP address setting will be set to

“Auto(DHCP)”. (The manually entered number will be saved.)

• When IP address setting is set to “Manual”, the setting of DNS setting will automatically be

“Manual” and when IP address setting is set to

“Auto(DHCP)”, you can set either “Auto(DHCP)” or “Manual” for DNS setting.

Proxy Setting

1. Press [OK] repeatedly to select the desired setting.

• For default settings, select “Do Not Use”.

• If you need to change the proxy setting as instructed by your Internet service provider to set the designated proxy address and port, select “Use”.

If you select “Use”, follow the following instructions to set the proxy address and proxy port.

40

a) Use [ K/L] to select “Proxy Address”, then press

[OK]. Proxy address setting screen will appear.

Enter proxy address.

• The keyboard screen will appear.

Others

Proxy Address

_

1 2 3 4 5 6 7 8 9 0 a b c d e f g h i j k l m n o p q r s t u v w x y z .

_ OK

Clear All Clear a/A/@ OK

[

K/L/s/B] :

Move the highlight.

[the Number buttons] : Enter number.

[OK] : Enter the highlighted number/ word.

[RED] :

[GREEN] :

Clear the entered number or word.

Clear all the entered numbers or words.

[BLUE] :

[YELLOW] :

Switch between abc ? ABC ? @!?

Set the entered number or word.

b) After you enter proxy address correctly, press

[YELLOW].



Others

Proxy Address

Is Setting OK?

xxxxx

No

Yes c) Use [ K/L] to select “Proxy Port” , then press

[OK]. Proxy port setting screen will appear. Enter proxy port number with number buttons.

Others

Proxy Address

Please select the input Proxy Port.

then press ÒK’ xxxxx d) After you enter proxy port correctly, press [OK].


Note

• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.

Connection Speed

You can set connection speed as your preference.

(The default setting is “Auto”.)

1. Press [OK] to show the options for

“Connection Speed”.

2. Use [ K/L] to select the desired setting, then press [OK].

“Auto”:

Set the appropriate connection speed automatically, in accordance with your network environment.

“10BASE Half”:

Set the connection speed to “10BASE Half”.

“10BASE Full”:

Set the connection speed to “10BASE Full”.

“100BASE Half”:

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Set the connection speed to “100BASE Full”.


Note

• Choose a connection speed in accordance with your network environment.

• The network connection may be disabled depending on the device, when the settings are changed.

BD-Live Setting

You can limit Internet access for BD-Live discs.

(The default setting is “Allow”.)

1. Press [OK] to show the options for “BD-Live

Setting”.

2. Use [ K/L] to select the desired setting, then press [OK].

“Allow”:

Internet access is permitted for all BD-Live contents.

“Limited Allow”:

Internet access is permitted only for BD-

Live contents which have content owner certificates. Internet access without the certificates is prohibited.

“Prohibit”:

Internet access is prohibited for all BD-Live contents.


MAC Address

You can check the MAC address of this unit.

“MAC Address” is for viewing only.

 Wireless

If you connect this unit to the network wirelessly, select

“Wireless” and set up necessary settings.

41

<Wireless Router>

In order to use a wireless network, you must set up the connection to the wireless router.

You must set the wireless router to infrastructure mode. Refer to page 13 for details.

Find wireless network

Search for wireless networks automatically and select the wireless network name (SSID) from the list.


2. Use [ K/L] to select “Wireless”, then press

[OK].

3. Use [ K/L] to select “Wireless Router”, then press [OK].

4. Use [ K/L] to select “Find wireless network”, then press [OK].

• This unit will start searching for wireless networks automatically.

5. The list of wireless networks will be displayed. Use [ K/L] to select the appropriate wireless network name (SSID), then press [OK].

• This unit will start searching for the authentication setting of the selected wireless network automatically.

Others


AP1

AP2

AP3

AP4

AP5

AP6_Test

Page Down

1/ 2

If the unit finds the authentication setting of the selected wireless network, skip to step 7. If the unit fails to find the authentication setting automatically, proceed to step 6 to select it manually.

6. Use [ K/L] to select the authentication setting of the selected wireless network, then press [OK].

Others


WEP/WPA Authentication

None

WEP

WPA-PSK (TKIP)

WPA-PSK (AES)

WPA2-PSK (TKIP)

WPA2-PSK (AES)

42

• For a wireless network with authentication setting, select the authentication setting, according to the security type of the wireless network.

• For a wireless network without authentication setting, select “None”.

“None”:

Set the authentication setting to “None”.

“WEP”:

Set the authentication setting to “WEP”.

“WPA-PSK (TKIP)”:

Set the authentication setting to “WPA-PSK (TKIP)”.

“WPA-PSK (AES)”:

Set the authentication setting to “WPA-PSK (AES)”.

“WPA2-PSK (TKIP)”:

Set the authentication setting to “WPA2-PSK

(TKIP)”.

“WPA2-PSK (AES)”:

Set the authentication setting to “WPA2-PSK

(AES)”.

7. “WEP/ WPA Key” entry screen will appear.

Enter the WEP/WPA key of the selected wireless network using cursor buttons, number buttons and color key, then press

[YELLOW].

• Confirmation message will appear. Select “Yes” to complete the settings.

Others

Wireless Router

Is Setting OK?

SSID

WEP/WPA Authentication

WEP/WPA Key

API

WPA2-PSK(AES)

**************...

No

Yes

8. Following screen will appear. Use [ K/L] to select “Yes”, then press [OK] to go to

“Advanced Settings”.

• For further operation, refer to “Advanced

Settings” on page 43.

Others


Wireless router settings are incomplete.

Please use "Advanced Settings" to complete your setup.

No

Yes


Note

• For a wireless network with authentication setting, key icon appears to the right hand of the wireless network name (SSID).

• Signal icon shows the strength of the signal.

• WEP/WPA key appears as asterisks on the confirmation screen.

Manually enter your SSID

Set up the connection to the wireless router manually by entering the wireless network name

(SSID).

1. Follow steps 1 to 3 in “Find wireless network” on page 42.

2. Use [ K/L] to select “Manually enter your

SSID”, then press [OK].

• Wireless Router Name (SSID) entry screen will appear. Enter the wireless network name

(SSID) using cursor buttons, number buttons and color key, then press [YELLOW].

Others

Manually enter your SSID

Wireless Router Name (SSID)

_

1 2 3 4 5 6 7 8 9 0 a b c d e f g h i j k l m n o p q r s t u v w x y z .

_ OK

Clear All Clear a/A/@ OK

• List of authentication settings will appear.


Wireless Router Status

You can check the current status of “Wireless

Router” setting.


2. Use [ K/L] to select “Wireless Router Status”, then press [OK].

• The list of current wireless router settings, and the confirmation message will appear.

Select “Yes” to complete the settings.


<Advanced Settings>

After you set up the “Wireless Router” setting, set the network setting to “Easy” (wireless) or

“Custom”(wireless).

Easy (wireless)

To set the network setting to “Easy”(wireless), follow the following procedure. For details of this setting, refer to “Easy (Wired)” on page 39.

• If you select “Yes” in step 7 of “Find wireless network” on page 42, skip to step 3.


2. Use [ K/L] to select “Advanced Settings”, then press [OK].

3. Use [ K/L] to select “Easy”, then press [OK].

Custom (wireless)

To set the network setting to “Custom”(wireless), follow the following procedure.

• If you select “Yes” in step 7 of “Find wireless network” on page 42, skip to step 3.


2. Use [ K/L] to select “Advanced Settings”, then press [OK].

3. Use [ K/L] to select “Custom”, then press

[OK].

• For details of each setting, refer to following pages.

“IP Address Setting” / “DNS Setting”:

Refer to “IP Address Setting / DNS Setting” on page 40.

“Proxy Setting”:

Refer to “Proxy Setting” on page 40.

“BD-Live Setting”:

Refer to “BD-Live Setting” on page 41.

“MAC Address”:

Refer to “MAC Address” on page 41.

Note

• You cannot select “Advanced Settings” if

“Wireless Router” setting is not completed.

 Disable

Deactivate all the network connection and settings.


2. Use [ K/L] to select “Disable”, then press

[OK].


Note

• The network connection can be reactivated by setting network connection to “Wired” or

“Wireless”.

Software Update

[SETUP]

 “Other"“Software Update”

This unit lets you update the software yourself using a software update disc.

To update the software, you must first download the latest version software to a disc, then execute

“Software Update”.

Current Version

You can confirm the current software version.

1. In “Software Update” menu, use [ K/L] to select “Current Version”, then press [OK].

2. Press [OK] or [RETURN] to exit.

 Disc Update

1. Prepare a software update disc:

Access www.magnavox.com, and download the latest version software to a blank disc by following the directions described on the site.

• Use a blank disc and download one software per disc.

• For more details on how to download the software, please refer to the site.

2. In “Software Update” menu, use [ K/L] to select “Disc Update”, then press [OK].

3. Use [ K/L] to select “Yes”, then press [OK].

• Disc tray will open automatically.

4. Insert the software update disc obtained at step 1.

5. After completing loading disc, confirmation message will appear. Select “Yes” and press

[OK] to start updating.

6. After the disc update finishes, this unit will restart and eject the disc.

43

The indicators show the progress status...

(Success) PLAY indicator lights up.

STOP

STOP

PLAY

PLAY

STANDBY/ON

(Error)* PLAY and STANDBY/ON indicators flash.

STANDBY/ON

* If the indicator shows Error...

1) Unplug the AC power cord for about 10 seconds, re-plug AC power cord and then turn the unit on.

2) Confirm the current software version.

3) If the software version is updated, the software update has succeeded. If not, please try again.

Note

• Please do not unplug the AC power cord while updating the software.

• All settings will remain the same even if you update the software version.

• The version of Netflix will also be updated if newer version of Netflix is available when updating the software.

 Network Update

You can update the software by connecting the unit to the Internet.

1. In “Software Update” menu, use [ K/L] to select “Network Update”, then press [OK].

2. Use [ K/L] to select “Yes”, then press [OK].

• This unit will then start checking for the latest software version.

3. Confirmation message will appear. Use

[ s/B] to select “Yes”, then press [OK].

• The unit will start downloading the latest software version.

4. When the download completes, confirmation message will appear. Press [OK].

• The unit will start updating the software version.

• It may take a while to complete the updating.

5. After updating finishes, this unit will restart and open the disc tray automatically.

Note

• In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary settings.

• For network connection, refer to “Connection to the Network” on page 12.

• For network setup, refer to “Network

Connection” on page 39.

• Please do not unplug the AC power cord or LAN cable while executing the “Network Update”.

• All settings will remain the same even if you update the software version.

• The disc tray will open automatically after updating finishes. This is not a malfunction.

• The version of Netflix will also be updated if newer version of Netflix is available when updating the software.

Initialize

Menus to reset player settings, format SD card, clear erased BD-ROM data or network settings, and deactivate VUDU.



3. Use [ K/L] to select a desired option, then press [OK].

“Setup”:

Resets the setup menu to the default.

The setting for “Parental”, “Network

Connection” and “Mode Select” will not be reset.

“Format SD Card”

(Available only when an SD Memory Card is inserted.):

Initializes the SD Memory Card. After confirmation message appears, use [ K/L] to select “Yes”, then press [OK].

“Erase Saved BD-ROM Data (Player)”:

Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, from this player.

“Erase Saved BD-ROM Data (SD Card)”

(Available only when an SD Memory Card is inserted.):

Clears the supplemental data for the BD-ROM playback, such as subtitle data, from the SD

Memory Card.

“Network Settings”:

Resets the network setting to the default.

“Netflix Deactivate”:

Deactivates the connection to Netflix.

“Vudu Deactivate”:

Deactivates the connection to VUDU.

Initialize

Setup

Format SD Card

Erase Saved BD-ROM Data(Player )

Erase Saved BD-ROM Data(SD Card)

Network Settings

Netflix Deactivate

Vudu Deactivate

4. Confirmation message will appear. Use [ K/L] to select “Yes“, then press [OK].

• Press [OK] again to complete the settings.


Note

• Do not remove the SD Memory Card while executing the “Format SD Card” or the “Erase

Saved BD-ROM Data (SD Card)”. It damages the card.

44

OTHERS

Troubleshooting

If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist.

Problem

No power.

No sound or picture.

Solution

- Check if the AC cord is properly connected.

- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.

- Check if the connected TV is turned on.

- Check if the connections are made securely and correctly.

- Check whether the connected TV or other device supports HDCP. (This unit will not output a video signal unless the other device supports

HDCP.)

- Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of other connected device.

No audio / video signal on the display device via HDMI cable.

Distorted picture.

- If the unit is connected to the unauthorized display device with an

HDMI cable, the audio / video signal may not be output.

- Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the TV and this unit and then reconnect it to both the devices while they are powered on.

- Ensure that your HDMI cable is certified.

- Sometimes a small amount of picture distortion may appear. This is not a malfunction.

- Connect this unit directly to the TV. If the audio / video cables are connected to a VCR, pictures may be distorted due to the copy right protection system.

Completely distorted picture or black / white picture with

BD / DVD.

Picture freezes momentarily during playback.

- Make sure the disc is compatible with this unit.

No sound or distorted sound.

- Adjust the volume.

- Check if speakers are connected correctly.

- Check the HDMI connections.

- Check the settings in “Audio” menu.

- Check the disc for fingerprints / scratches and clean with a soft cloth wiping from center to edge.

- Clean the disc.

Disc cannot be played back.

- Clean the disc.

- Ensure the disc label is facing up.

- Check if the disc is defective by trying another disc.

- Cancel the ratings control or change the control level.

- Insert a correct disc that can be played back on this unit.

SD Memory Card cannot be read.

No return to start-up screen when disc is removed.

- The format of the card does not match that accepted by this unit or the card is not compatible.

- Reset this unit by turning it off, then on again.

The unit does not respond to the remote control.

Buttons do not work or the unit stops responding.

- Aim the remote control directly at infrared sensor window on the front panel.

- Reduce the distance to infrared sensor window.

- Replace the batteries in the remote control.

- Re-insert the batteries with their polarities (+ / - signs) as indicated.

- To completely reset the unit, press and hold [ y STANDBY/ON] on the front panel for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for 5-10 seconds.

The unit does not respond to some operating commands during playback.

- Operations may not be permitted by the disc. Refer to the instructions of the disc.

45

Problem

The unit cannot read BD /

DVD/ CD.

Angle does not switch.

Playback does not start when the title is selected.

Solution

- Condensation? (Let sit 1 or 2 hours)

- Check if the disc is compatible with this unit.(Refer to page 14.)

- Wipe the dirt off the disc or replace the disc.

- The angle cannot be switched for BD / DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes.

- Check the settings in “Parental” menu.

The password for rating level has been forgotten.

Cannot connect to the network.

Cannot use the wireless connection.

Cannot connect to the network while my PC is connected to the network.

The capacity of the SD card decreased.

Cannot use the BD-Live function or download of data does not perform properly.

Cannot play back BD-video

(BD-ROM Profile 2.0).

Cannot use Netflix feature.

- Enter the default password “4737”, then your forgotten password will be cleared.

- Check if the LAN cable connection is properly made.

- Turn on the modem or broadband router.

- Check the network setting.

- Check if the broadband router and/or modem is correctly connected.

- Check the “BD-Live Setting”.

- When connecting directly to a modem via a LAN cable, you might need to power cycle the modem to reset settings on the modem.

- Once you have activated the wireless connection please wait 30 seconds for the connection to be established after turning on the unit, before trying to access network features such as BD-Live, Netflix,

Blockbuster or VUDU.

- Check the content of your Internet service contract to see if your

Internet service provider prevents multiple terminals connecting at the same time.

- Data may be written to the SD card when a BD-video that supports the virtual package is used and an SD card is in the slot.

- Insert an SD card with enough capacity (1GB or more).

- Check if an SD card is correctly inserted.

- Make sure the write-protect switch on the SD card is not enabled.

- Insert an SD card(1GB or more) which is formatted on this unit.

- Some discs with BD-Live function require memory when playing back the content.

- Do not remove the card during playback.

- Make sure the write-protect switch on the SD card is not enabled.

- Netflix is available only in the United States.

- Check if the network connection is properly made.

- Visit netflix.com/MAGNAVOX on your PC and become a Netflix member.

Cannot add movies or TV episodes to the instant Queue.

Even though the speed of the

Internet connection improves during playback, the picture quality of Netflix streaming movie does not improve.

The picture quality of streaming movie (Netflix,

Blockbuster or VUDU) is poor.

Streaming movie (Netflix,

Blockbuster or VUDU) often stops or starts buffering during playback.

Cannot use Blockbuster feature.

Cannot use VUDU feature.

- Visit netflix.com on your PC.

- Adding movies or TV episodes on this unit is not available.

- The picture quality does not change during playback.

- The picture quality differs depending on the speed of Internet connection at the time of loading.

- Check the speed of your Internet connection. You need speeds of at least 8 Mbps to this player for high quality uninterrupted playback.

- Contact your Internet service provider to troubleshoot your Internet connection for speed and line quality. Consistent line quality and speed are very important for Internet video playback.


- Visit www.blockbuster.com/auth/login (Blockbuster) on your PC and create an account.


46

Problem

Cannot rent or buy movies /

TV episodes on VUDU.

Solution

- You need to activate the VUDU account. (Refer to page 27)

- Log into your account at http://my.vudu.com and check your payment information.

Note

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations.

• Some functions are prohibited on some discs.

47

Language Code List

Language

A-B

Abkhazian

Code

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

4748

4747

4752

6563

4759

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian [BUL]

Burmese

Byelorussian

C-E

Cambodian

Catalan

Chinese [CHI]

Corsican

Croatian

Czech [CZE]

Danish [DAN]

Dutch [DUT]

5759

4947

7254

4961

English [ENG]

Esperanto

Estonian

F-H

Faroese 5261

Fiji 5256

Finnish [FIN] 5255

5464

4965

5047

6058

5160

5161

5166

4860

5072

4854

4855

4864

4853

5971

4851

4764

5471

4765

4771

4772

4847

5167

Language

French [FRE]

Frisian

Code

5264

5271

Galician

Georgian

German [GER]

Greek [GRE]

5358

5747

5051

5158

Greenlandic

Guarani

5758

5360

Gujarati 5367

Hausa

Hebrew

Hindi

Hungarian [HUN]

Icelandic [ICE]

Indonesian

I-K

5447

5569

5455

5467

Interlingua

Interlingue

Inupiak

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

5565

5560

5547

5551

5557

5347

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767 Kurdish

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

5861

5847

5868

5860

5866

Language

Macedonian

Malagasy

Code

5957

5953

Malay

Malayalam

Maltese

Maori

Marathi

Moldavian

Mongolian

Nauru 6047

Nepali 6051

Norwegian [NOR]

O-R

6061

Occitan

Oriya

Oromo (Afan)

6149

6164

6159

5965

5958

5966

5955

5964

5961

5960

Panjabi

Pashto;Pushto

Persian

Polish [POL]

Portuguese[POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

S

Samoan 6559

Sangho 6553

Sanskrit

Scots Gaelic

6547

5350

6247

6265

5247

6258

6266

6367

6459

6461

6467

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

6564

6554

6566

6660

6560

Singhalese 6555

Note

• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every time you change the audio setting on page 24 or subtitle language setting on page 23. If you choose any other languages, “---” will be displayed instead.

Language

Siswat

Slovak [SLO]

Code

6565

6557

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Slovenian

Somali

Spanish [SPA]

Sundanese

6558

6561

5165

6567

Swahili 6569

Swedish [SWE] 65681

T

Tagalog 6658

Tajik 6653

Tamil

Tatar

6647

6666

Telugu

Thai

Tibetan

6651

6654

4861

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

6655

6661

6665

6664

6657

6669

U-Z

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Servicing

• Please refer to relevant topics on “Troubleshooting” on page 45 before returning the product.

• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please contact 1-800-605-8610 or visit : www.magnavox.com/support www.funaiservice.com/

48

Specifications

Signal system

Power requirements

Power consumption

Dimensions (width x height x depth)

Weight

Operating temperature

Operating humidity

General

NTSC color

120 V AC, 60 Hz

16 W (standby: 0.5 W)

14.2 x 2.0 x 8.5 inches (360 x 50 x 215mm)

4.04 lbs. (1.83 kg)

41°F (5°C) to 104°F (40°C)

Less than 80 % (no condensation)

Video output (RCA jack x 1)

HDMI output (HDMI jack x 1)

Audio output (Analog) (RCA jack x 2)

Audio output (Digital) (RCA jack x 1)

LAN terminal

Wireless LAN

Terminals (Rear)

1 Vp-p (75Ω)

Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio

L/R: 2 Vrms (output impedance: more than 1kΩ)

500 mVp-p (75Ω)

10BASE-T/100BASE-TX

IEEE 802.11 b/g/n

Note

• The specifications and design of this product are subject to change without notice.

NETWORK SERVICE DISCLAIMER

Network Service Disclaimer

Content and services made available through this product are transmitted by third parties by means of networks and transmission facilities over which Company has no control and third party services may be terminated or interrupted at any time, and Company makes no representation or warranty that any content or service will remain available for any period of time. Without limiting the generality of this disclaimer, Company expressly disclaims any responsibility for any interruption or suspension of any content or service made available through this product. Company is not responsible for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.

THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED

“AS IS.” COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE

WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING

WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ACCURACY, VALIDITY, TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE

MADE AVAILABLE THROUGH THIS PRODUCT.

IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT

OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES

ARISING OUT OF, OR IN CONNECTION WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED

THEREIN) OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

All content and services accessible through this product belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property rights. Such content and services are provided solely for the User’s personal noncommercial use. User may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services made available through this product.

49

ESPAÑOL

Discos Reproducibles

Este aparato es compatible con la reproducción de los siguientes discos y archivos.

Discos y Archivos Reproducibles

Discos Blu-ray

Discos reproducibles

- BD-vídeo (capa simple / doble)

- BD-RE ver. 2.1 (capa simple / doble)

(Grabado en formato BDMV)

- BD-R ver. 1.1 / 1.2 / 1.3 (capa simple / doble)

(Grabado en formato BDMV) (Los discos no cerrados pueden no reproducirse.)

DVD-vídeo

DVD-RW

DVD-R

CD-DA (CD de sonido)

CD-RW

CD-R

KODAK Picture CD

DTS-CD

Archivos reproducibles

AVCHD

Windows Media

JPEG

TM Audio

Tarjetas legibles

Tarjeta de memoria SD

(8 MB - 2 GB)

Tarjeta de memoria SDHC

(4 GB - 8 GB)

Tarjeta miniSD (8 MB - 2 GB)

Tarjeta microSD (8 MB - 2 GB)

Soportes

DVD-RW/-R


(incluido SDHC),

Tarjeta miniSD,

Tarjeta microSD

BD-RW/-R

DVD-RW/-R

CD-RW/-R


(incluido SDHC),

Tarjeta miniSD,

Tarjeta microSD

Archivos / datos reproducibles

AVCHD, Windows

Media TM Audio,

JPEG, comentario en imágenes, subtítulos u otros extras del BD-

ROM ver.2(profile

2.0 / profile 1.1)

Códigos de Región

Esta unidad se ha diseñado para reproducir BDvídeo con región “A” y DVD-vídeo con región “1” o

“ALL”. No podrá reproducir BD-vídeo o DVD-vídeo que estén tituladas para otras regiones. Busque los símboloes de su BD-vídeo o DVD-vídeo.

Si estos símbolos de regiones no aparecen en su

BD-vídeo o DVD-vídeo, no puede reproducir el disco en esta unidad. El número o letra dentro del globo se refiere a la región del mundo. Un BDvídeo o DVD-vídeo etiquetado para una región específica solamente puede reproducirse en unidades que tengan el mismo código de región.

Encontrar el Canal de Vídeo en su Televisor

Una vez finalizadas todas las conexiones, debe localizar el canal de vídeo correspondiente en su televisor (canal de entrada externa).

1. Una vez que haya realizado todas las conexiones correspondientes, pulse

[STANDBY/ON y ] para encender la unidad.

2. Encienda su televisor.

3. Pulse el botón del mando a distancia del televisor que da acceso al canal de entrada externa. Puede tener el nombre de “SOURCE”, “AV” o “SELECT” (consulte el manual del usuario de su televisor).

Watch HD movies

Ajusta el idioma para el menú del reproductor

1. En modo detención, pulse [SETUP].

2. Utilice [ K/L] para seleccionar y después pulse [OK].

3. Utilice [ K/L] para seleccionar “Player Menu” y después pulse [OK].

Quick

Mode Select

HDMI Audio Out

Disc

HDMI Multi(Normal)


Player Menu English

Network Selection Wired

4. Utilice [ K/L] para seleccionar su idioma deseado, y luego presione [OK].

5. Pulse [SETUP] para salir.

50

Reproducción Directa

1. Presione [OPEN/CLOSE A] para abrir la bandeja de discos e insertar su disco con el rótulo apuntando hacia arriba. Presione de nuevo [OPEN/CLOSE A] para cerrar la bandeja de discos.

• Asegúrese de que el disco sea compatible con este aparato.

2. Es posible que la reproducción comience automáticamente.

• De lo contrario, pulse [ B(reproducir)].

Para pausar la reproducción:

Pulse [ F(pausar)].

Para retomar la reproducción normal:

Pulse [ B(reproducir)].

Para detener la reproducción:

Pulse [ C(detener)].

Reproducción se encuentra en el modo

Reanudar-Detención.

3. Para detener momentáneamente la reproducción presione [STOP C] una vez.

51

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR

OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO

OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL

OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED

STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE

CENTER.

THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF

NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS

WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT

VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT

PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED

SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

FUNAI SERVICE CORPORATION

Tel: 1-800-605-8610 www.magnavox.com/support www.funaiservice.com/

2200 Spiegel Drive Groveport, OH 43125

E5S20UD 1VMN29953B

★★

Printed in China

* 1 V M N 2 9 9 5 3 B *

FUNAI MBP5130/F7 Owner's Manual

Owner’s Manual

WARNING:

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

Related manuals

Table of contents

FUNAI MBP5130/F7 Owner's Manual

Owner’s Manual

WARNING:

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

Related manuals

Funai

MBP5120F/F7

Magnavox

MBP2100/F7

Magnavox

MRD410B/F7

Magnavox

MBP1100/F7

Sylvania

CD Player NB500SL9

Sylvania

DVD Player NB501SL9

Magnavox

NB500MS9

Magnavox

NB500MG9

Magnavox

NB500MGX A

Kodak

RODCFS20

Magnavox

MRD410B/F7

Table of contents