GE 113D5497P183 Maintenance Instruction

Add to my manuals
28 Pages

advertisement

GE 113D5497P183 Maintenance Instruction | Manualzz

Wsher

Contents

Agitator

Appliance Registration

26

2

Bleach Dispenser

Care and Cleaning

8

26

Consumer Services

Controls Setting Guide

27

6,7

Cycle Settings 5

Detergents, Other Additives 13-17

Energy-Saving Tips

Fabric Softener Dispenser

Filter-Flo@ Pan

Hard Water

Limestone Deposits

Loading

Mini-Basket~ Tub

Model and Serial Numbers

Operating the Washer

Pre-Treating

4,9,26

16

14,26

4,12

10

2

4,5

7,11,17

8

9

Problem Solver

Safety Instructions

Sorting

Stains

20-25

3,4

4, 11

18

Stain Removal Guide

Storage &Vacation Tips

19

26

User Maintenance Instructions 26

Warranty Back Cover

GEAmwver CWm# m.mmo

Models WWM876M

WWA8898M

.-=.- ..... . .. .

.

.. .. .- y..—— ~ . . -.—.—.

~ ——- -- —.—— —.-. —— ..—. ---,. -

Help us help you...

Read this book carefully.

It is intended to help you operate and maintain your new washer properly.

To obtain a Spanish language version of this book, call

GE Answer Center’@

800.626.2000

consumer information service.

Keep it handy for answers to your questions.

If you don’t understand something or need more help, write (include your phone number):

Consumer Affairs

GE Appliances

Appliance Park

Louisville, KY40225

Pax-aobtener la version en espaiiol de este manual, name a

GE Answer Center?

servicio de information para el consumidor, telefono 800.626.2000.

Save time and money.

Before you request service . . .

check the Problem Solver on pages 20-25. It lists causes of minor operating problems that you can correct yourself.

FOR YOUR SAFETY

If you received a damaged washer...

Immediately contact the dealer

(or builder) that sold you the washer.

If you smell gas:

1. Open windows.

2. Don’t touch electrical switches:

3. Extinguish any open flame.

4. Immediately call your gas supplier.

*Don’t turn electric switches on or off because sparks may ignite the gas.

Write down the model and serial numbers.

You’ll find them on a label on the lower left side near the front.

These numbers are also on the

Consumer Product Ownership

Registration Card that came with your washer. Before sending in this card, please write these numbers here:

Model Number

FORYOURSAFETY

Do not store or use gasolineor other flammablevaporsand liquidsin the vicinity of this or anyother appliance.

Serial Number

Use these numbers in any correspondence or service calls concerning your washer.

All washing instruction terms

“~-+.

in this book conform to th~Care LaU~g

Rule established by the Federal Trade Commission, January 1984.

*%~

If you need service

To obtain service, see the

Consumer Services page in the back of this book.

We’re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive. here are three steps to follow for further help.

FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the details-including your phone number—to:

Manager, Consumer Relations

GE Appliances

Appliance Park

Louisville, Kentucky 40225

FINALLY, if your problem is still not resolved, write:

Major Appliance

Consumer Action Panel

20 North Wacker Drive

Chicago, Illinois 60606

..

-

-~

P

‘/

IMPOKIANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

al

WARNING-TO reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:

Use this appliance only for its

intended purpose as described in this Use and Care Book.

This washer must be properly installed and located in accordance with the Installation Instructions

before it is used. If you did not receive an Installation Instructions sheet with your washer, you can obtain one by contacting the service location nearest you.

–Properly ground to conform with all governing codes and ordinances. Follow details in

Installation Instructions.

–Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.

–Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.

–Connect to adequate plumbing and drain facilities as described in the Installation Instructions.

. Turnoff water fauce~ when the washer is not in use to relieve pressure on hoses and valves, and to minimize leakage if a hose or valve should break or rupture.

● men discomecting this appliance pull by the plug rather than the cord to avoid damage to the cord or junction of cord and plug.

Make sure that the cord is located so that it wiHnotbe stepped on, tripped over ,oro@erwise subjected to

&age or stress.

, -~

a?g&?g.pPkPr

Pg.

Serviciqg

uI@s

slecifHIY, .

“-nmnimeiidedinthislheand(hre

Bookor”b published user-repair instmctions that you understand and have the skills to carry out.

To minimize the possibility of injury:

Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can produce a toxic gas which may cause death.

s Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosivesubstances

(such as wax, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode.

Do not add these substances to the wash water, and do not use these substances around your washer and/or dryer during operation.

W-G–HYDROGEN GAS is produced by the chemical action within your water heater and the gas can accumulate in the water heater and/or water pipes if hot water has not been used for a period of two weeks or longer.

HYDROGEN GAS CAN BE

EXPLOSIVE UNDER THESE

CIRCUMSTANCES.So to prevent the possibility of damage or injury, if you have not used hot water for two weeks or more, or move into a residence in which the hot water system may not have been used for some time, turn on all hot water faucets and allow them to run for several minutes before using any electrical appliance which is connected to the hot water system.

This will allow any hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

it is moving. Befomloading, unioadingor adding clothes, push in the Cycle Selector knob to

“HOP” position, then wait until the machine has completely stopped before opening the lid.

3

Close supervision is necessary if this appliance is used by or near children. Do not allow children to play inside, on or with this appliance or any discarded appliance. Dispose of discarded appliances and shipping or packing materials properly.

Before discarding a washer, or removing from service, remove the washer lid.

Keep all laundry aids (such as detergents, bleaches, fabric soileners, etc.) out of the reach of children, preferably inalockedcabinet.

Observe all warnings on container labels to avoid personal injury.

QKeep the area around and underneath your appliances free from the accumulation of combustible materials, such as lint, paper, rags, chemicals, etc.

Keep the floor around your appliances clean and dry to reduce the possibility of slipping.

To minimize the possibility of electric shock, unplug this appliance from the power supply before attempting any maintenance or cleaning (except the removal and cleaning of the lint filter).

N~: Turning the Cycle Selector knob to an OFF position does NOI’ disconnect the appliance from the power supply.

. ~ not tamper with controls.

Do not operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a darnaged cord or plug.

. Never climb on or st~d on tie washer top.

.

.

.

DO IIOt WWh fiberglass irticles in your washer. Skin &itation could result from the remaining particles that may be picked up by clothing during subsequent washer use.

I

(continued wxtpage)

hpOrt@ Safety Instructions

(continued)

The laundry-process can reduce

the flame retardancyof flabrics.To avoid such ~ result, the gament maiwfacturer’s &ire instructions should be followed very carefully.

For washer operation

Do not leave washer lid up during cycle. This will stop the wash and spin action and prevent completion of the cycle.

How to operate your clothes washer

W~G—To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTA~ SAFETY INSTRU~IONS before operating this appliance.

SA~ THESE

INSTRUCTIONS ~.

@

W8sVSpm Speeds Var#able Water Level Wash/lhnse Temp Extra Rtnse

Regular cycles

‘;~~ nn a

=

.D~~:iZKC, ‘~:@::ww ““”@””

~

@

$

,.

CA

~~@%:,P,eWashCv.,e

NmwAl

Extra Chwst Odes ‘

Sorting

and

Loading

Sort clothes carefhlly by fabric type, weight, color and amount of soil according to instructions on page 11.

c Remove Filter-Flo@ pan and

Mini-BasketT” tub. The underside of the lid is a good place to put the pan while loading or unloading clothes.

Do not use Mini-Basket tub when washing regular loads. You’ll find complete details on how and when to use the Mini-Basket tub on page 10.

@Add measured amount of detergent. See pages 13 through 17 for information on detergents and other laundry additives.

Load clothes into the wash basket. being careful not to overload. Clothes should be be]ow the retaining ring. See page 12 for more loading information.

Position the Filter-Flo pan on the agitator. Lint will collect in the pan for easy removal when the wash is finished.

NOTE: Do not use the Filter-Flo pan as a wash basket. Do not put any items to be washed in the

Filter-Flo pan.

c See pages 8 and 9 for information on how to use Bleach and Fabric

Softener Dispensers.

For information on bleaches and fabric softeners, see page 17.

Close the lid. Washer will fill but not agitate or spin with the lid open.

Setting the Controls

Use the Controls Setting Guide on

pages 6 and 7 to help you make the proper selections.

~ Select Wash/Spin Speed

@ Select Water Level

SMALL: Washer is less than 1/3 full of clothes.

MEDIUM: Between 1/3 and 1/2 full.

LARGE: Between 1/2 and 2/3 full.

EXTR.4 LARGE: Over 2/3 full.

MINTI-B.4SKET: See instructions on page 10.

~

If you want to increase level after you’ve made a selection, turn knob to “RESET” and select new IeveI.

Q Select Wash/Rinse Temperature.

Cold rinse will be automatically provided with use of Perm Press and Pre Wash Cycles. (An extended cool-down spray rinse and coldwater deep rinse are provided to minimize setting of wrinkles. )

~ select Extra Rinse, if desired.

Turning control to “ON” will provide a second deep rinse in the

Regular Cycle. If no Extra Rinse is desired, turn control to “OFF:’

@ Push Cycle Selector Knob in and turn clockwise to your selected wash setting.

*

/

3 START

STOP*

‘“ ‘

@ Pull Cycle Selector Knob out to start the washer. If you wish to change setting after washer has started, push Cycle Selector Knob in to stop the washer and reset to the new position.

Setting can be changed a[ any time.

I

Tips to Help You Select Settings

Regular Cycles—

For most cottons, linens and work and play clothes with normal soiling. “Extra Rinse” can be selected, if desired, as an automatic extension of the Regular Cycles

(turn Extra Rinse knob to “ON”).

Extra Rinse can also be set as an independent cycle-for example, to rinse and spin clothes that have been in the wash basket longer than normal.

[Regularcvcle.;i~:~

AUTO EXTSA RINSE

0.

“J;v

WJSMAL

Extra C/cl

Pre Wmh Cycle—

For small, lightly soiled loads you need in a hurry.

‘\ i soils. See page lS.

IarCycles r

Extra Clean Cycles—

For modern fabrics with heavy or

oily soil. A second rinse is provided to help remove the additional detergent that is required for these

Permanent Press Cycle—

For permanent press loads such as shirts, blouses, dresses and similar wearing apparel with normal soiling. An extended cool-down

:=:;:

LIGHT SOIL 9

NORMAL 8

HEAVV

#’ so.kcyc,e::w~y’lo.

Q

‘e

AIETOEXTRA RtNSE Og

“g;

NORMAL

8

START

Pre Wash Cycle

Iar Cycles s.akc”.le;f~

LIGU7 SOIL

NORMAL

R,”Se

‘:;s;s

‘%”

START

Pre Wash Cycle

Extra Clean Cycles

I

~:@

HEfivY

~f ●

‘*

AU1O EXTRA RINSE 0,

8

● “g;

NORMAL

Extra Clean CVcles

I

I

Soak Cycle—

A combination of agitation and

Cycles soak for more effective polyester knits laundering.

Plus an extended cool-down spray rinse is provided

~—

Extra Rinse ‘r p

‘:-if

‘~z~s I+”

● oFf

‘%:~f~~~

SIAR1

&:ljv,

Use with most soaking aids to loosen embedded soils and stains.

Pernsane and Knits

;

Orr

;SIAR1

Pre Wast

~08wAL

OFr

LIGHT S011 m

NORMAL

HIAVY

OF+

‘4

AUTO ExTR4 RINS[ o

I

Extra Chl g:l

NE&VY

NORMAL

Extra Clean Cycies

‘*

P.UTO ExTRA RINSL 0,

Extra Clean Cycies k

%E -k)As)4 q~u F&& Em~)q

Regular

Cycles

Cycle

Selector

Settings

Soak

Wash

Heavy

Spin

Rinse

Spin

2nd Rinse

119115

I 3% I

3

7 qyj

Normal

161

3M13%II

3 3

7

Light

Soil

7

*Z i/j q)j

Soak

3

7

I

Spin

Total

T:me

1*7171*711717

36

*5O

32

%6

25

*39

11

*VVhenExtra Rinse control is turned to “OhT?’

Heavy

15

3 1/”

3

3

3

41X

Extra

Clean

Normal

I 10

I 3%

3

3

3

38I/,

Permanent Press and

Knits Cycles

P.

Press Knits

Pre Wash

I

I

NOTES:

Total time includes pauses between each phase of the cycle.

c Total time does not include water fill times. Fill times vary depending on household water pressure and your selected water level.

25

~ 2’ ’25-

5

Controls Setting Guide for different fabrics and loads

Load

Cottonsand Linens

White/Colorfast

Bright/Non-colorfast

Work Clothes, Dungarees, etc.

Heavy soil

Average soil

Permanent Press, Treated Cottons,

Blends with Cottons

Heavy or oily soil

Average or light soil

Synthetics-Polyester, Nylon,

Acrylic Knits and Woven Fabrics

Sturdy

Delicates

Silks, Wools; Blends of Silk and Wool

Rayon and Acetate

Down-filled garments, if machine washing is recommended

Wash/Spin

Speed

Wmh Water

Temperature*

Normal/Normal

Normal/Normal

Hot or Warm

Warm or Cold

Normal/Normal

Normal/Normal

Hot

Hot or Warm

Normal/Gentle

Normal/Gentle

Normal/Gentle

Gentle/Gentle

Gentle/Gentle

Gentle/Gentle

Gentle/Gentle

Hot

Warm

Warm

Warm

Warm

Warm

Warm

Cycle

.

Regular Cycles

Regular Cycles

Extra Cleaning Cycles

Regular Cycles

Extra Cleaning Cycles

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Cycle Setting

Normal or Light Soil Setting

Normal or Light Soil Setting

Heavy or Normal Setting,

Jepending on load size

Normal Setting

Heavy or Normal Setting, depending on load size

Set at P. Press Setting

Set at P. Press Setting

Set at Knits Setting

Set at Knits Setting

Set at Knits Setting

Set at P. Press Setting

$

‘-

.

e

Baby Clothes—Sturdy, such as Diapers,

Nightgowns, Shirts, Pads, Sheets,

Receiving Blankets, Coveralls

Baby Clothes—Delicate

Blankets-Wool, Part-Wool,

Cotton

Blankets-Synthetic, Electric

Curtains-DO N(YI’MACHINE WASH

FIBERGLASS

Chenille Bedspreads, Robesa

Normal/Normal

Gentle/Gentle

Hot

Warm

5 min. soak then

Normal/Normal

5 min. soak then

Normal/NormaJ

Gentle/Gentle

Warm

Warm

Hot or Warm

Gentle/Gentle

Slipcovers, Draperies, Bath Mats and Rugs=

Denims (especially Indigo Blue Jeans) and other fabrics that bleed

Normal/Normal

Normal/Normal

Hot or Warm

Hot or Warm

Cold or Warm

Rubber-coated Items, Laminated Fabrics,

VmYl,Plastics and Articles with Plastic Trim

Pillows

Gentle/Gentle

Gentle/Gentle warm warm

Regular Cycles

Permanent Press and

Knits Cycles

Regular Cycles

Regular Cycles

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Regular Cycles

Regular Cycles

Normal or Light Soil Setting, depending on amount of soil

Set at Knits Setting

Light Soil Setting

Light Soil Setting

Set at P. Press Setting

Set at P. Press Setting

Normal Setting

Normal Setting

Permanent Press and

Knits Cycles

Permanent Press and

Knits Cycles

Set at P. Press Setting

Set at P. Press or Knits Setting, depending on amount of soil

.,

Q)

*Use Cold Rinse to save energy.

-heck size. Some slipcovers ‘draperies and bedspreads may be too large for automatic home-size washer.

6

Refer to Garment Manufacturers’ Care Labels

Bleach

Liquid chlorine type.

Only non-chlorine bleach when needed.

White or colorfast, liquid chlorine type.

Non-colorfast, only non-chlorine bleach when needed.

White or colorfast, liquid chlorine type.

Non-colorfast, only non-chlorine bleach when needed.

Special Instructions

If colorfast is unusually soiled, use hot water. Use maximum detergent recommended in guide on page 15.Use Extra Cleaning, Large or Small Setting depending on load size. See

Page 5. Use Extra Rinse if desired.

Use maximum detergent recommended in guide on page 15.

Small loads reduce wrinkling. Use maximum detergent recommended in guide on page 15.

Use Extra Cleaning cycles-see page 5. Use Extra Rinse if desired.

White or colorfast, liquid chlorine type.

Non-colorfast, only non-chlorine bleach when needed.

If unusually soiled, use hot water. Use maximum detergent recommended in guide on page 15.For heavy or oily soil on sturdy garments, use Extra Cleaning, Large or Small Setting depending on load size-see page 5. Use Extra Rinse if desired. Small loads reduce wrinkling.

Wash only if recommended by the garment manufacturer. FOI1OW No bleach

Seldom needed. If needed, use only non-chlorine bleach.

No bleach

White or colorfast, liquid chlorine type.

Only non-chlorine bleach when needed.

No bleach

No bleach

White or colorfhst, liquid chlorine type.

Wash in your washer only if recommended by the garment manufacturer.

Wash frequently to fluff up the down and retain the garment’s warmth. Wash separately. Wet down gives off an odor which maybe absorbed by other garments. Odor disappears when garment is dry. Treat heavily soiled areas with liquid detergent or paste made of water and granular detergent. Close zippers. Wash 2 or 3 at a time or add towels to balance.

GARMENT MUST BE TUMBLE DRIED.

You may prefer to use a mild-type detergent. Do baby clothes separately. Pretreat spots.

Rinse diapers, nightgowns, pads and sheets after use. Keep diapers in a covered pail of cold water and conditioning agent like Borateern brand.

You may prefer to use a mild-type detergent. Do hand-knit garments by hand or in Mini-

Basket~ tub-see page 10.

Fill washer, add detergent and allow to dissolve before adding blanket. Do one blanket at a time. Pretreat heavily soiled spots with liquid detergent.

On electric blanket, sew a strong piece of cloth over plug to protect blanket and washer from damage. Do one blanket at a time. Pretreat heavily soiled spots with liquid detergent.

Vacuum out loose dirt before washing.

White or colorfast, liquid chlorine type.

White or colorfast, lictuid chlorine tYW.

No bleach

If unusually soiled, use Normal/Gentle Wash/Spin Speed.

Wash only 2 or 3 rugs or mats at one time. Shake before washing to remove excess dirt.

For new “indigo blue” jeans, wash at least 3 times in very small loads with full water fill.

Jeans need ample room to move to avoid white lines at creases. May discolor plastic washer parts. Subsequent washings will reduce discoloration, but will probably never eliminate it.

The stained parts will not discolor subsequent washing loads.

Tumble on FLUFF (No Heat).

No bleach

No bleach Pillows are made of different materials-dacron, fiber, foam, polyester, natural feathers and down. Many pillows can be machine washed, but manufacturers’ care Zabels must be followed carejidly.

If washing is recommended, check pillows for weak seams or holes and mend to prevent escape of feathers or filling. Fill washer, add detergent and agitate for several minutes to dissolve detergent. Add two pillows at a time to balance load. Use extra large water level.

For more information on care labeling, send for “What’s New About CARE LABELSV

For sale by the Sup@ntendent of Dw-uments,

U.S. Government Printing OffIce, Wmhington, D.C. 20402.

7

——— ----------- .-. ...- .

... ----.- —.-—----------

<.

-...7?

.-—. . . .

I

Energy-Sa* Tips

If your clothes and household items don’t look clean and fresh after washing, you will probably re-wash them . . .and that means you’ll waste energy. Remember to sort your clothes carefully, and load them properly, select correct cycles, use enough detergent and choose a water temperature warm enough to release and get rid of soil.

Use Hot Wash—up to 150°F.-on

a regular basis only when washing heavily soiled articles-such as work and play clothes.

Under normal soil conditions, wash in water above 80”F. (27 °C.).

This generally means using the

Warm Wash temperature setting on your washer—temperatures approximately 90° to llO°F. or hand comfortable.

If you notice that soil has accumulated after several consecutive washings, use

Hot Wash occasionally, if safe for fabrics.

Always rinse in Cold Water. The temperature of the rinse does not affect cleaning.

Try to wash less often. Save articles of the same type of fabric until you have a fill load.

c If you must wash smaller loads, adjust the amount of water. Small loads should have lower water levels.

Wash in off-peak utility hours.

Your local utility can tell you which are the off-peak hours.

. Use Normal Spin Speed to remove more water and help lessen drying time. The dryer will remove any wrinkles caused by the Normal Spin.

Use your Mini-BasketT}’ tub for very small loads. It uses less water than the small water level in the big tub on this washer. You will also save on detergent and energy.

How to use the

Bleach Dispenser

Use this dispenser with liquid bleach only. E you prefer to~se powdered bleach, pour it into the wash basket along with your detergent.

Do not put powdered bleach into the bleach dispenser.

@-t

Measure bleach carefully. Here are some recommended amounts:

LARGE WATER LEVEL—llA C1.q)

(310 ml) liquid

SMALL WATER LEVEL—213 CUP

(170 ml) liquid

MINI-BASKET tub—1/4 CUP

(60 ml) liquid o

Pour measured amount of liquid bleach directly into bleach dispenser.

Do not overfill or allow dispenser

to overflow. Avoid splashing.

Undiluted bleach can cause fabric damage.

@Never pour undiluted liquid bleach directly onto clothes or into the wash basket or Mini-

Basket tub.

How to use the

Fabric Softener

Dispenser

How to Use the

Soak Cycle

How to Use the

Filter-Flo@Em

Position the Fabric Softener

Dispenser on the Filter-F1o pan.

Pour manufacturer’s recommended amount of fabric softener into a standard measuring cup.

Add enough water to fill the cup

1/2 full.

Pour the diluted softener into the dispenser.

The fabric softener will automatically be dispensed at the proper time.

Do not stop the washer during

the first spin. This will cause the dispenser to empty tQo soon.

When using Fabric Softener

Dispenser with the Mini-Basket tub, use one (1) teaspoon (5 ml) of concentrated softener or one (1) tablespoon (15 ml) of diluted softener.

c Do not use the Fabric Softener

D~penser with the Soak Cycle.

If the rinse dispenser gets clogged, soak it in a solution of

1 cup water and 1 cup alcohol.

(

Soak Cvcle .0

LIGHT SON 9

NORMM

MfAVV

OFF

A#&ss ,*

NJTOEXTRA

‘*

RINSE

“: ‘;:;:~

Regular Cycles

~,@’

.&

OFF

0,

NORMAL

Permane and Knm

START

Pre Was/

Extra Ch

“ “SOAK CYCLE” temperature is controlled by the Rinse temperature switch. (If a warm soak is desired, set the WASH/RINSE

TEMPERATURE switch to “HUI’/WARM:’)

Be sure “Extra Rinse” control is turned “OFF:’

If a hot soak is desired, set the

WASH/RINSE TEMPERATURE switch to “HCYT/WARM” and turn the Cycle Selector Knob to

“NORMAL” in the Regular Cycle.

Start the washer. After washer fills and begins to agitate, push in the

Cycle Selector Knob and turn to

“SOAK CYCLE:’ Pull out the

Cycle Selector Knob to complete the cycle.

For an extended soak allow the washer to fill and agitate for a few minutes to dissolve the soaking agent. Then push in the Cycle

Selector Knob to stop the washer

(keep lid closed) and allow to soak for as long as desired. After desired soak period, pull out the Cycle

Selector Knob to complete the cycle.

Do not use the Fabric Softener

Dispenser or the Mini-Basket tub with the Soak Cycle.

The Filter-Flo pan has two functions:

LINT FILTER—Position the

Filter-Flo pan on the agitator afier loading clothes into the washer.

Lint is easily seen and removed after the wash is finished.

LID FOR THE MINI-BASKET—

After loading clothes in the Mini-

Basket tub, be sure to replace the

Filter-Flo pan. The pan serves as a lid to keep the clothes in the Mini-

Basket tub.

NOTE: Do not use the Filter-Flo pan as a wash basket. Do not put any items to be washed in the Filter-Flo pan. Do not place detergent packets in the Filter-Flo pan.

. ------.. . - . .

-.

------

9

-.

...-

-..

. . ..

-.—— .—.

. —.

------a-_-.

.4.-.

.-

&_ ..-_ ._ ----

. .-.

A_ .

..—..

.—~

,

,!.

How to use the Mini-Basketmtub

The Mini-Basket~ tub, designed for small loads of regular fabrics or delicate hand-washables, can be used with any cycle except the

SOAK cycle.

npicd

Mini-Basket” tub wash loads

Small loads of regular fabrics

(up to 2% pounds).

Delicate loads such as lingerie, panty hose, girdles, blouses, sweaters.

‘&xl&,

baty clothes&d othersmall, delicate hand-washables.

Stuffed toys.

Tennis shoes.

How to wash a small load of regular fabrics or delicate hand-washables

1.

Remove Filter-Flo” pan.

3. put l/4 to 1/3

CUP

(60 to 80 ml) detergent in the bottom of the Mini-

Basket tub.

4. Load clothes in Mini-Basket tub. See page 11 for sorting help.

5. After loading clothes in the

Mini-Basket tub, be sure to replace the Filter-Flo pan. The pan serves as a lid to keep the clothes in the

Mini-Basket tub.

I

7.

Add fabric softener, if desired.

Place the fabric softener dispenser on the Filter-Flo pan. Pour 1 teaspoon (5 ml) of concentrated softener or 1 tablespoon (15 ml) of diluted softener into a standard measuring cup. Add enough water to fdl the cup 1/2 full. Pour the diluted softener into the dispenser.

See page 9 for dispenser instructions.

& Close lid and set controls as follows:

EXTRALARGE

I

MEDIUM 8

(

\

SMALL +

I

–Set Water Level to “MINI-

BASKET” position.

—Select desired Wash/Spin Speed and Wash/Rinse Temperature.

See page 4.

—Select desired cycle

(REGULAR, PERM PRESS or

KNITS). See page 4.

9. Pull Cycle Selector Knob out to start washer.

1

@

2. Place Mini-Basket tub on agitator.

Pull the agitator toward the front of the machine for easier installation and removal of Mini-Basket tub.

6. Add bleach, if desired. Measure carefully and pour recommended amount of liquid bleach—1/4 cup

(60 ml)-directly into the bleach dispenser. See page 8 for dispenser instructions.

Special instructions for use of the Mini-Baske~ tub

The Mini-Basket tub can be used with any cycle except the SOAK cycle.

Do not wash clothes in the reguku wash basket when using the Mini-

Basket tub. There will not be enough water in the regular basket and darnage to clothes could result.

When washing stockings, panty hose and other easily tangled items, always handle separately.

To minimize tangling, the use of a net laundry bag is recommended.

m

How to sort the clothes

Separate

17

● --

Lint

Producers from

Sort by soil

Separate

;y:;

\3

13 from

,

Medium

Soil from

Lint

Collectors j

LINT PRODUCERS—Such as terry toweling and chenille—give up lint.

LINT COLLECTORS-such as man-made fibers and napped fabrics like velveteen and corduroy

—attract lint. These must be washed separately.

o

For more information on lint control, see page 20.

Sort by fabric

Separate

Sort by color

Separate from from from from from

0 w

In addition to sorting to reduce lint collection, it is reco~mended that fabrics of similar construction be washed together whenever possible.

from w

FOR INSTRUCTIONS ON

DIFFERENT FMRICS AND

LOADS, SEE PAGES 6 and 7.

11

—+ ---- --

It pays to check and prepare clothes for washing.

Empty pockets, brush out cuffs, zip zippers, snap snaps, Hooks and buttons.

Do any necessary mending—rips, hems, tears.

Check all items for areas of heavy soil or stain.

Remove stains. For STAIN

REMOVAL GUIDE, SEE PAGE 19.

Turn Poly Knits inside-out to minimize fabric surface damage.

EXTRA CLEANING

Special Modern Fabric Cycles for removable heavy and oily soils.

(See page 5 for instructions.)

See page 19 “Stain Removal

Guide:’

See page 6 “Controls Setting

GuicieY

See page 20 “The Problem Solver.”

Soaking and Pre-treating— a good way to loosen deep soils and stains.

A thorough soaking with detergent or special soaking agent is another way to remove heavy soils, embedded dirt and even some stains.

Soaking can be either a completely separate washing step or a preliminary step to a complete wash cycle.

For detailed information on how to soak in your washer, seepage 9.

FOR INFORMATION ON

SOAKING AGEN13, SEE

PAGE 17.

Pre-treat heavy soil by rubbing in a small amount of liquid detergent or a paste made of water and powdered detergent or soap. For best results, wait 1/2 hour before washing.

. .. .. . . . — —.

How to load your washer

Special recommendations for washing permanent press if you do not have a dryer.

If you are machine-washing

Permanent Press clothes that you plan to line dry or drip-dry, use extra care to minimize wrinkling in the wash process:

. Be careful not to overload washer. Permanent Press clothes must have ample room to move freely. A Medium size Permanent

Press load is the largest that should be washed.

* Use more water than you would for a regular load. Use a Medium

Water Level for a Small Load; an

Extra Large Water Level for a

Medium Load.

QRemove clothes promptly as soon as washer stops and hang immediate y.

Q To minimize wrinkling, use

Normal/Gentle or Gentle/Gentle

Wash/Spin Speed.

~

Load clothes dry.

Take a properly sorted group of clothes and drop them loosely in the wash basket in this order:

Large Items—like sheets. Do not wrap around the agitator.

o

Small Items—like washcloths.

Q

Medium Size Items—like towels.

Here is a typical full load:

3 Double Sheets

6 Long Sleeve Shirts

3 Boxer Shorts

6 Standard Pillow Cases

5 T-shirts

4 Pair Trousers

6 Handkerchiefs

This illustration, with clothes just reaching the Clothes Retaining

Ring, shows a proper load. Clothes have ample room to move because they are not packed down. nor wrapped around the agitator.

Clothes are loaded dry since wet items are apt to pack down which encourages overloading. This size load requires a full water fill.

What is the best size load of clothes—large, medium, or small? Save time, energy and

detergent by avoiding extra use of the washer. Try to wash a full load of clothes. If you can it is better to save clothes until you have a full load. If you must wash smaller loads, save water. energy and detergent by adjusting the water level for the size of the load. See page 4.

To add items after the washer has started.

Turn off the washer.

Carefully remove the Filter-Flo pan.

Add any additional articles by submerging next to the agitator.

Replace the Filter-Flo pan and restart the washer.

NOTE: Do not use the Filter-Flo pan as a wash basket. Do not put any items to be washed in the

Filter-Flo pan. Do not place detergent packets in Filter-Flo pan.

NOTE: When washing stockings, panty hose and other easily tangled items, always handle separately. To minimize tangling, we recommend the use of a net laundry bag.

$

Factors to consider in selecting detergentsand soap

Products

Phosphate–

Powdered Detergents

Non-Phosphate— l%wdered Detergents

Advantages

Perform well in hard or soft water

Wash all types of fabrics well.

Can be used in hot, warm, or cold water.

Perform satisfactorily in soft or moderately hard water.

In some areas only non-phosphate products are available.

Disadvantages

Are not available in some areas.

Liquid Detergents

Generally do not clean well in hard water.

May be difficult to dissolve, especially in cold water.

Should not be used in cold water.

Those containing sodium carbonate as an ingredient may cause harmful limestone deposits on clothes and washer when combined with hard water.

(See page 14.)

May not pertorm as well as powdered phosphate products when diluted in wash water.

Soaps

Perform well in soft water.

Offer better performance in hard water than powdered non-phosphate types.

Cleans synthetics and fabric blends well.

Are excellent as concentrates for removing spots.

Completely dissolve even in cold water.

Perform well in soft water.

Generally do not clean well in medium-hard or hard water.

May combine with water hardness minerals to form stic~ soap curd.

..

~.w-~, ?

,? , .~.

13

.!-.

..-Y

.—.-.

,, ————r

The results of continued use of carbonate detergents

1s your water hard? If it is, and if you use a carbonate type nonphosphate detergent, you will most probably notice limestone* deposits on your clothes and washer surfaces. The hardness of your water and your washing frequency will determine how rapidly the limestone will build up. If your water is VERY HARD

(11 or more grains) and if you wash just a few loads a week, you may see limestone buildups in just a few months.

‘ r-

Effixts on clothes

Although limestone buildup occurs more rapidly on cotton, it will eventually affect various fabrics in the following ways:

Gives a stiff, harsh, rough feel to fabrics such as toweling.

Causes colors to fade and become dull and dingy.

Causes graying of fabrics.

Leaves a white, powdery residue on dark-colored items.

Causes spot-fading of bright colors as a result of direct contact with detergent.

Reduces wrinkle-resistance of permanent press fabrics.

Destroys effectiveness of flarneretardant finishes on cottons such as children’s sleepwear.

Increases i%bric wear because of the scrubbing action between limestone deposits on the fabrics during washer agitation.

~’ects on washer

QUnsightly buildup on all washer surfhces exposed to the wash solution.

. Mat-like, crusty formations caused by lint adhering to the sticky limestone deposits.

Increased service calls because of limestone deposits in the pump, recirculation water hoses, filters and other washer parts.

Recommended methods to reduce limestone buildups

Use a powdered phosphate detergent or a liquid detergent if these are available in your area.

Install a home water softener.

This will significantly reduce limestone buildup.

Use a packaged non-precipitating water softener, such as Calgon brand with phosphate.

Good washing practices may delay limestone damag e to clothes

The following recommendations will temporarily delay the effects of limestone on your clothes.

These are generally good washing practices and will give better soil removal whether or not you have hard water or use carbonate detergent.

Use hotter wash water, for example up to 150°F. for cottons.

This also improves oily-soil removal.

If you wash in cooler water to save energy, use more detergent to promote better washing. Also be sure to use bleach on bleachable fabrics. Use hot water whenever possible.

Add detergent and allow washer to fill and agitate for three or four minutes to dissolve detergent before adding clothes.

Increase amount of detergent.

See guide on opposite page for recotiended detergent tiounts in relation to water hardness.

● of bleaches, pHXlk& packaged water conditioned, prewash soil and stain removers to help in removing stubborn soils and stains.

Use greater care in sorting loads.

Wash very dirty loads separately and increase detergent to help keep dirt from redepositing on less soiled items. Wash delicate items separately to prevent damage from heavy, sturdy clothes.

Wash smaller loads to increase cleaning action of washer.

s Use fabric softener to counteract stiffness or harshness in clothes.

How to partially restore clothes

Once clothes have developed deposits, they may be partially restored by soaking in a solution of two cups of vinegar in one gallon of hot tap-water for-15 minute:.

USE A PLASTIC CONTMNER.

Then wash clothes in the washer using detergent.

CAUTIONS:

Do not use vinegar soak solution in washer. The acidic action of the vinegar may damage the porcelain.

Viiegar soak solution may reduce the wrinkle-resistance of permanent press fabrics.

Vinegar soak may damage

the dyes in some fabrics.

WMESTONE-technically called CALCIUM CARBONA~-is caused by the reaction of the calcium in the hard water with the sodium carbonate in the detergent.

$

.-

14

-—.-— -—---.-—--,-- ------— ----~.---—-----.

— --.

-— .—------, -.

—--—m.

‘ “, “

,-, ,

‘. --—y --

——-7

How much dete~ent should you use?

r The use of a sufficient amount of detergent is one of the most important things you can do to make sure your wash comes out clean.

Amount required varies according to:

1. Water hardness

2. Amount of soil

3. Size of load

4. Type of detergent

5. Wash temperature

Use more detergent if you have...

1. Hard water

2. Large loads

3. Greasy or oily soils

4. Lower wash temperature

5. Low phosphate detergent.

If the recommended amount of detergent produces too many suds, switch to a low sudsing detergent brand, and follow instructions on package.

Using too little detergent is a common cause of laundry problems. Always measur~ detergent in a standard measuring cup.

How to use detergent—granular or powdered:

For best results, add detergent to the wash basket before loading clothes. If you load your clothes first, add detergent next to the agitator.

If your detergent doesn’t dissolve well, predissolve the detergent in hot water, then pour directly into the wash basket.

.

@R ecommended amount of detergent for average soil load

High Sudsing

Powder Type

Low Sudsing

Concentrated

Powder Type

LIQUID

I

I

Water Level Setting

Water

Hardness

VERY

HARD

10-20Gr.

HARD

4-10 Gr.

SOFT

O-4Gr.

o-1o

Grains

Extra

Large Large Medium Small

Mini

Basket

1. Use recommended amount of detergent for your load and water hardness as shown in guide.

2 cups

1% cups

1%cups

1%cups

1%cups 1%cups

1M cups ?4cup

% cup

% cup

2. Other detergent types-Low and normal suds, powders, liquids, non-phosphate powders, follow recommendations on package.

I

1 cup

I

1 cup

I

74 cup

I

‘/2 cup

I %

CUP

FOLLOW PACKAGEDIRECTIONS

3. For Extra Cleaning cycle double the amount of detergent

‘cup

in guide.

4. For hard water treatment, see page 16.

.

..

———- -------

‘-----

15

---

.

. . .

.

. . . .

.-.

,--. . . . .

.

.“, 1

..

.

.

.

Hard water-do you have it?

Before you can decide what to do about hard water, you need to know if you have it and, if so, how hard it is.

s If you live in a municipal area, contact your water company.

If you live in a rural area, or in some suburban areas, contact your county agent.

The answer will be “you have ‘so many grains’ per gallon” and means this:

Oto 3 grains per gallon-SOFT

4 to 10 grains-HARD

11to 19 grains-VERY HARD

20 grains and over—

EXTREMELY HARD

If your water is SOFT, you have no problem. You can use soap or detergent as you prefer and forget all about hard water. If you have

HARD water-less than 10 grains— and you use phosphate detergent, you also have no problem.

But, if you have more than 10 grains, you will need to soften your water with either. . .

1.

An installed water softener in your home, or

2. The use of a packaged water sofiener.

For information on water softeners, see guide below.

Add this much water softener with a full water level

I

Grains of hardness

When using with detergent

When using with soap

I o-1o o

% cup

(80 ml)

I lo–15

‘Acup

(60 ml)

% cup

(160ml)

15-20

?4cup

(120ml)

% cup

(180ml)

I

20–25

I

25–30

I over 30

% cup

(160ml)

1 cup

(240 ml)

1 cup plus 1 tablespoon for every 5 grains above

30 (240 ml plus 15ml for each extra 5 grains)

1 cup

(240 ml)

1% cups

(360 ml)

1%cups plus 1 tablespoon fbr every 5 grains alwe

30 (300 ml plus 15ml for each extra 5 grains)

Other laundry products

Laundry product and type

BLEACH

Chlorine Liquid

such as Clorox brand

Non-chlorine such as

Clorox 2 brand

FMRIC SOFTENERS

Rinse additive such as

Downy Brand

Wmh Additive such as

Rain Barrel brand

TIN’ISANDDYES

Powdered suchas Rit and Tintexbrands

How to use it

Use your Bleach Dispenser according to instructions on page 8.

Follow package directions.

Put bleach into washer with detergent.

Use your Fabric Softener Dispenser according to instructions on page 9.

Follow package directions.

Add during wash cycle.

SANITIZER

Chlorine Bleach, such as C1OI’OX brand

Use in case of infection and contagious disease.

See under Bleach above.

WATER SOFTENER

Non-precipitating such as Calgon brand

Precipitating such as

Borax brand

Follow package directions.

Add at start of wash cycle.

Follow package directions.

Use with detergent or soap in wash cycle.

I SOAK AGENT

Such as Biz brand Follow package directions.

PRETREATING, STAIN

AND

sparREMOVERS

Suchas Spray‘n Wash and K2R brands

Follow package directions. Treat only heavily soiled areas. Check garments’ care labels for instructions.

Follow package directions.

N(Y133:Tiited garments may not be colorthst. W~h separately.

Special instructions

1) Do not pour undiluted liquid chlorine bleach directly into washer or on dry clothes.

2) Some of today’s washable fabrics should not be chlorine bleached such as: 100% cotton flame-retardant children’s sleepwear, silk, wool, mohair, spandex, leather, or non-fast colors. Dilute bleach before using on any fabric.

3) Check Manufacturers’ Care Labels for special instructions.

1) Maybe used on all kinds of fabrics.

2) Is most effective in hot water.

1) Helps make clothes fluffy and soft.

2) Reduces static electricity.

3) Use carefhlly. Too much may cause staining on some clothes.

4) Do not pour directly on clothes.

5) For those recommended for adding to the wash cycle, such as Rain Barrel brand, follow manufacturer’s instructions exactly.

Guards against infection by killing most bacteria and viruses,

Suspends hardness minerals in solution, keeping water clear.

Combines with water hardness minerals to form precipitate which gives cloudy or milky appearance to water.

CAUTION: Washer control panels and finishes may be damaged by some laundxy pretreatment soil and stain remover products if such products are sprayed on or have direct contact with the washer. Apply these pretreatment products away from washer. The fhbric may then be washed normally. Darnage to your washer caused by pretreatment products is not covered by your ~ty.

Clean washer to avoid discoloration of next load. Go through complete cycle (5-minute wash) using hot water, l/2 cup (120ml) detergent, 1 cup (240 ml) bleach. W@e exterior parts. Caution: Tkting may discolor plastic in washer. Subsequent washings will reduce discoloration but may never eliminate it.

.,

--—-y—-~.~---Y

—— ——.—-—— .—— ——

!.,

I

How to remove stains

1. Try to remove stains as soon as possible. The fresher the stain, the easier it is to remove.

2.

Before attempting to remove any stain, take these steps:

Find the fabric and the finish in the chart on the next page, and use only recommended methods.

Check the care label instructions that came with the garment.

Test stain removal product on a hidden inside seam or on a sample of the material.

● Avoid use of hot water on unknown stain. It can set some stains.

3. Follow stain removal with a thorough rinsing.

4. Wash with recommended amount of soap or detergent.

Stain Removal Hint—

Using Chlorine Bleach for

White and Bleachable Fabrics.

Mix 1/4 cup (60 ml) chlorine bleach with one gallon (3.8 liter) of cool water—approximately 80”F.

(2’7°C.)-in a sink or pan. Soak stained area for 5 minutes and launder in washer.

The Case of the “Invisible” Stain.

Food or cooking oils on your synthetic garments may cause stains which are virtually invisible and which you may not notice as you put your clothes into the washer.

If these stains are not completely removed in the wash, the oily spots may pick up dirt from the wash water. Then they will become very visible and you may think they were caused by the wash cycle itself.

Once these spots become visible, how can you remove them?

Rub in undiluted liquid detergent and let stand 30 minutes.

Re-wash using hottest water the fabric can stand.

How can you prevent these

“After-You-Wash” stains?

Increase the amount of detergent normally used.

Increase water temperature where fabric will permit.

Wash synthetic garments more often.

See next page for

Stain Removal Guide.

‘)

<L

?

,-

,.

18

-,—-y-------yr-~ a-

Stain removal guide

Adhesives

(Chewing Gum, etc.)

White and Bleachable Fabrics

See Control Setting Guide, Bleach on I%ge 7

Rub with ice or immerse in very cold water.

Use dull tool to carejidly scrape off as much adhesive or gum as possible. Sponge with a safe dry cleaning fluid,* then launder.

Anti-perspirants,

Deodorants

Blood

Chocolate, Cream,

Ice Cream and Milk

Coffee and Tea

Apply undiluted liquid detergent. Rinse. If stain remains, bleach according to Stain Removal Hint on opposite page. If color has changed, you may be able to restore it by sponging with ammonia.** Rinse thoroughly.

Soak in cold water, then launder in warm water. If stain remains, bleach according to Stain Removal Hint on opposite page, launder.

Soak in cold water. Treat stain with a stie dry cleaning fluid*;

Apply undiluted liquid detergent, launder, dry. Bleach according to Stain Removal Hint on opposite page, launder and dry.

Without cream: Bleach according to Stain Removal Hint on opposite page. Launder. With cream; Follow guide directions for cream.

Cosmetics: Eye Shadow,

Lipstick, Mascara, Liquid or Pancake Makeup, Rouge,

Powder; Crayon; Grease,

Oil, Tar, Cod Liver Oil.

Treat stain with safe dry cleaning fluid? Apply undiluted liquid detergent; launder and dry. Bleach according to Stain Removal

Hint on opposite page.

Other W~hable Fabrics

Same as white and bleachable fiibrics.

Same as white and bleachable fabrics except use non-chlorine bleach.

Sponge or soak in cool water, then launder.

Soak in cold water. Sponge with a safe dry cleaning fluid.* Apply undiluted liquid detergent. Launder in warm water.

Sponge with warm water. If stain remains, apply warm glycerine, let stand 30 minutes and rinse well, or sponge with a safe dry cle&ing fluid.* Launder.

Sponge with a safe dry cleaning fluid.*

Then launder in warm detergent water.

Fresh Fruit, Fruit Juices,

Wine, Vegetables, or Food

Coloring

Soak stain in cool water. If stain remains, bleach according to Stain

Removal Hint on opposite page, launder.

Sponge with warm water. Bleach remaining stain with non-chlorine bleach.

Grass, Foliage, Flowers,

Mildew, Scorch

Apply undiluted liquid detergent. Launder. (Treat mildew spots while they are fresh, before mold has a chance to weaken fabric.) If either type stain remains, bleach according to Stain Removal Hint on opposite page, launder. (Severe scorch cannot be removed.)

Sponge with warm water. Apply undiluted liquid detergent.

Bleach remaining stain with non-chlorine bleach, then launder.

Old mildew stains can sddom be removed.

Scorch can seldom be removed.

Same as white and bleachable tibrics except launder using non-chlorine bleach.

Ink, Ballpoint

Paint and Vhrnish

Perspiration

Rust

Fresh stains: Place stain I%cedown on an absorbent towel and sponge with dry cleaning fluids or use spray cleaner. Apply undiluted liquid detergent. Old stains; bleach according to Stain

Removal Hint on opposite page.

Soften with oil, lard or Vaseline, then sponge with turpentine or banana oil. Launder in warm water.

Apply undiluted liquid detergent and launder in warm water. If color has changed you may be able to restore it by treating with ammonia or vinegar.= If any stain remains, treat with safe dry cleaning fluid* or bleach acconling to Stain Removal Hint on opposite page, launder and dry.

Apply rust remover,~ using madiicturer’s directions. Rinse and launder.

Same as white and bleachable fhbrics.

Launder in warm water. Rinse well. Bkaeh with non-chlorine bleach.

Same as white and bleaehable ihbrics.

Waution: Because cleaning fluids tend to be toxic, be sure you are in a well ventilated mom when using them. No cleaning fluid should be used unless user is hmiliar with the limitations and required cautions (usually pMtcd on label). Usc extreme caution with flammable compounds.

Under no CiICUmStanCeS should t%bricscontaining flammable materials (waxes, cleaning fluids, ete.) be washed in washer.

#~ not ~ Chlofie bl~ch wi~ ~ofia or acids such ~

vineg~ Mfigcm

p~uce a @k g= which may CWX d~th.

Save and

——. . ..

19

-..-—. ------------ —..-..— --

~—<

~

gllliia

Use This Problem Solver

PROBLEM

LINT OR RESIDUE -

ON CL~HES

GREASY OR OILY

STAINS ON

LAUNDERED

GARMENTS

POSSIBLE CAUSE AND REMEDY

Inco~ect sorting of clothes. Separate lint-producers (such as terry towels and chenille) from lint-receivers (such as man-made fkbrics, velveteen, corduroy).

Washing too long, especially for smaller loads. For normal soil, wash one minute per pound of dry clothes.

Use of non-phosphate detergents which combine with hardness minerals to form a precipitate which can be mistaken for lint. Use a phosphate or liquid detergent; use warmer wash water or soften water with an installed mechanical softener or a packaged water softener.

Powdery residue from granular detergent may appear to be lint. Predissolve granular detergent in hot water before adding to washer; make sure detergent is completely dissolved before adding clothes; switch to liquid or cold water detergent or use warmer wash water. See page 15.

Overloading will cause abrasion which creates excessive lint. Wash fewer items with correct water level.

Too much bleach. Use correct amount of bleach according to package directions.

Not enough detergent to hold lint in suspension during wash cycle.

Increase amount of detergent. See page 15.

Incorrect use of fabric softener+ If us~ in wash cycle, softeners may react with detergent to create a white deposit. Use softeners in rinse cycle only unless package specifies adding to wash cycle. Use Fabric Sofkner Dispenser.

Seepage 9.

Pilling usuall y on polyester-cotton blends is caused by normal wear and may look like lint. Turning clothes inside-out may help.

Static electricityy caused by overdrying will cause attraction. Use fabric softener in rinse cycle.

These are sometimes called “Invisible Stains” because you may not notice them before washing clothes. However, if oily soils are not completely removed in wash cycle, the oily spots may pick up dirt from the wash water. The spots will then be very visible. They are not caused by the washer. Wash synthetic garments as soon as possible after wearing.

Use more detergent than normal and hottest water fabric can stand. If spots appear, rub in undiluted liquid detergent, let stand 30 minutes and rewash with extra detergent using hottest water fabric can stand. Use “Extra Cleaning” cycles, see page 5.

fiijl

c’

PROBLEM

GRAYED

CLOTHES

YELLOWED

CLOTHES

POSSIBLE CAUSE ANI) REMEDY

Insufficient detergent. You may need to increase amount of detergent used if load is larger than normal, if soils are oily or heavier than average, if water level is large or if water is Hard to Extremely Hard.

Water not hot enough for type of load. Be sure water heater is set to deliver hot water at the washer at 140°- 150°F. Do not wash when other hot water needs—such as dishwashing or family baths—are heavy.

Poor or inferior detergent. Change to phosphate detergent, if possible. Follow these steps:

1. Use water conditioner, (such as Calgon brand)

2. Pre-treat stains

3. Use hottest water possible

4. Use bleach where possible

5. Use pre-soak aids

6. Install water softener

Washer overloaded. Clothes cannot move freely to loosen and remove soil, causing gray appearance. Follow correct loading procedures for size of load.

Improper soaking with insufficient detergent. Usually a 30-minute soak is sufficient.

However, when using extended soaks for heavily soiled garments you may need to use twice the recommended amount of detergent.

Use of soap in hard water. Switch to a phosphate detergent, or follow six steps described above.

. Washing too long may result in increased soil deposition. Use shorter wash times for smaller loads.

Detergent dissolves too slowly. Detergent must be present in the wash solution at the start of agitation. See page 15.

To restore grayed clothes, follow one of these procedures:

1. Put clothes in washer. Fill with HOT water. Check Manufacturers’ Care Labels to determine if hot water is suitable for garment.

Add anon-precipitating type of water sofiener such as Calgon with phosphate— use 2

Y2 times as much as you need for normal water softening.

Do not use detergent or soap.

Allow clothes to go through complete cycle.

Repeat, if necessary.

2. If you prefer to use the Soak Setting, see page 9. Use the water softener in place of soak agent or prewash detergent and allow clothes to soak for about 20 minutes.

3. Use “Extra Cleaning” cycles, seepage 5.

4. Use the Mini-Basket tub. Seepage 10. Increase detergent.

Incomplete removal of body soil due to constant use of insufficient detergent. Check hem of T-shirt or pillow case. If they are white and center is yellow, it contains body oil. Restore whiteness following procedures on’ ‘Grayed Clothes:’ above.

21

. .-—. ——.

The Problem Solver

(continued)

PROBLEM

YELLOWED

CLClllI13S

@Orltinud)

BLUE OR GRAY

COLOR STAINS

SHRINKAGE,

GENERAL

SHRINKAGE,

KNITS

POSSIBLE CAUSE AND REMEDY

● c~onne bleach may yellow some fabrics with resin finishes. Use oxygen bleach (such as Clorox 2 brand). Refer to Garment Manufacturers’ Care Instructions.

Restore color using color remover (such as Rit or Tlntex brands), follow package directions.

Iron or manganese in water may cause overall yellowing or yellow spots.

1. Use extra detergent plus a non-precipitating water softener dissolved in water before adding clothes. Use non-chlorine bleach.

2. Have a special filter or chemical feeder installed in your home to remove iron and manganese from water.

3. Run hot water for a few minutes to clean iron residue buildup in lines; drain water heater occasionally.

4.

To remove spots: spread stained portion over pan of boiling water and squeeze lemon juice through stain. To remove overall yellow, use a commercially available rust scale remover, following package instructions.

If porcelain damage can occur, do not use in the washer; use a plastic container.

Improper use of fabric softener. Never pour fabric softener directly on clothes; always dilute before adding to rinse water. Dilute softener before filling your Fabric

Softener Dispenser. (See page 9.) Also, do not lift lid during spin. This may cause improper dispensing, resulting in stains. To remove stains: darnpen stained area and rub with undiluted liquid detergent. Re-wash, using chlorine bleach if safe for fabric.

Some fabrics will shrink whether washed in a washer or by hand; others maybe safely washed but will shrink in a dryer. Follow Garment Manufacturers’ Care Instructions exactly. If in doubt, do not machine wash or dry.

Relaxation shrinkage can occur in knit fabrics that have been improperly stretched and elongated by the manufacturer. When this occurs, garment may be pressed back into shape after each wash and dry cycle.

Progressive or delayed shrinkage is caused when starch or sizing (in some fabrics) is gradually removed by laundering. Maybe noticed in older garments that have been washed many times without previous shrinkage. Treat as for Relaxation Shrinkage above.

Shrinkage caused by overheating occurs in certain knit fabrics that have been heatshaped. When washing, drying or ironing temperatures exceed the temperatures used to shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by washing in cool or warm water; drying on Low or Delicate heat.

‘-fl

-.

PROBLEM

WRINKLING IN

PERMANENT PRESS

AND “NO-IRON”

ITEMS

SNAGS, HOLES,

TEARS, RIPS OR

EXCESSIVE WEAR

POSSIBLE CAUSE AND REMEDY

Leaving clothes in dryer after tumbling stops. Remove and hang clothes immediately.

Too many clothes in dryer. Dry only one washer load at a time. Do not combine loads.

Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes, with lighter Permanent Press items such as shirts or blouses. Do not wash

Permanent Press with regular laundry.

Too many clothes in washer. Permanent Press loads should always be smaller than regular loads. . .no more than medium loads to give clothes room to move freely.

Incorrect wash and dry cycles. Use Permanent Press Wash cycle which provides a cooldown rinse to minimize wrinkling. Also use Permanent Press Dry cycle.

Incorrect water level. Use Extra Large Water Level for Medium Load, Medium

Level for Small Load.

Repeated washing in too hot water. Wash in cold or warm water with plenty of detergent.

Accumulation of lime scale due to use of carbonate detergents. If you must use a non-phosphate detergent, avoid the use of high-carbonate-built detergent.

s Failure to use fabric softener. Proper use will minimize wrinkling.

To remove wrinkles:

Retumble on “Permanent Press” setting.

Rerinse and dry on “Permanent Press” setting.

If unsuccessful, retumble on high heat for 10-12 minutes and hang immediately.

Iron carefully.

Send to dry cleaners for pressing.

Some wrinkles may remain which cannot be removed.

● pins on ga~ents or shaq objects are removed. Also check wash tub.

left in pockets. Check to make sure all such objects

Snaps, hooks, sharp buttons, belt buckles,. zippers. Fasten hooks, zippers and buttons. Remove sharp buttons and belt buckles. This is especially important in washing knits which snag easily. Turn knits inside out.

Holes with random square shapes with yellow discoloration may be caused by improper use of chlorine bleach. Use only correct amount of bleach, using Bleach

Dispenser. Never add undiluted bleach to wash tub or allow clothes to come into contact with undiluted bleach. Do not wipe up bleach spills with clothes.

Chemicals such as hair bleach, dye, permanent wave solutions, battery acids and toilet bowl cleaners may cause fabric holes. Rinse all towels and other articles that came in contact with these chemicals before putting them in wash. Do not contaminate clothing articles with these chemicals.

Small, unnoticed tears may enlarge during washing process. Check garments before washing and mend all rips and tears.

23

...-..=.----

The Problem Solver

(continued)

PROBLEM

SNAGS, HOLES,

TEARS, IUPS OR

EXCESSIVE WEAR

(continued)

POSSIBLE CAUSE AND REMEDY

As Permanent Press garments age, they may show fraying at collars and cuffk This is normal due to weakening of fibers by the Permanent Press process. It is not caused by washer. You can slow this process by washing small Permanent Press loads with a

Large Water Level.

Do not wash heavy items such as towels with Permanent Press.

Remove collar stays, when possible.

QRoughness or burrs on agitator may cause rips or tears. Check agitator and file rough spots if necessary.

o Maybe caused by use of Normal/Normal Wash/Spin speed for delicate articles. Use

Gentle/Gentle Wash/Spin speed. Refer to Garment Manufacturers’ Care Labels.

* Garments weakened by age, sun or atmosphere.

This is inevitable and is not caused by washer. Slow process by washing on Gentle/Gentle Wmh/Spin speed.

Too large loads, or too little water. Load washer only with number of items that will move ikeely. Seiect correct water level.

Pretreat with liquid detergent. Use “Extra Cleaning” cycles, seepage 5.

HEAVILY SOILED

AREAS such as colkirs and cuffs

WASHER WON’T

OPERATE

WATER

TEMPERATURE

IS INCORRECT

@@@@

Make sure cord is plugged into outlet.

Make sure both hot and cold faucets are turned on.

c Make sure controls are set and cycle selector knob is pulled out to ON position.

Make sure lid is closed. Washer will fill but will not spin or agitate with lid open.

Check house fbses or circuit breakers. If another appliance is sharing the electrical outlet, remove it. Washer should have separate outlet.

Make sure temperature selector controls are properly set.

Make sure hot and cold faucets are turned on and regulated correctly.

o

Make sure hoses are connected to correct faucets.. hot to hot, cold to cold.

Water valve screens may be stopped up. Remove inlet hoses from

$1-’ water valve. Clean the screens and reinstall hoses.

Check household water heater to make sure it is delivering water at 140° to 150°F.

24

PROBLEM

WATER WON’T

DRAIN

WATER LEAKS

WASHER IS NOISY

POSSIBLE CAUSE AND REMEDY c Make sure drain hose is not kinked.

Top of drain outlet should be less than 8 ft. above floor.

Make sure hose connections are tight at faucets.

Make sure end of drain hose is correctly inserted in and secured to drain facility.

Make sure washer is level and firm to the floor with rubber foot pads in place and front jam nuts tight. See your Installation Instructions.

A sharp distinctive sound will be heard at the end of each spin period as the motor stops and the spin brake inside the transmission “locks in? This sound is normal.

Heavily unbalanced loads can cause the washer to vibrate excessively during spin, and may cause it to move from its original position. In extreme cases, (usually occurs when washing a single, heavy item or a small load when water level is set higher than necessary) the spin basket may strike the outer tub, creating a loud but harmless noise.

To correct, open the lid and redistribute the load evenly about the wash basket. Close the lid and restart.

Washer normally pauses between washing steps. . . such as between wash and spin or between spin and rinse.

WASHER PAUSES

IN CYCLE

If you need more help.. .cail, toll free:

GE Answer Center@

800.6262000

consumer information service

..-—.

-----

25

— . .. . ... . . .. .

Care and Cleaning

USER

INSTRUCTIONS

The tub.

The porcelain is self-cleaning.

Leave lid open after washing to allow moisture to

evaporate. Do not use harsh or gritty cleansers.

The exterior.

Wipe off any spills of washing compounds.

Wipe or dust with damp cloth. Try not to hit surface with sharp objects.

To store washer:

Ask service technician to remove water from drain pump and hoses to prevent freezing..

Do not store the washer where it will be exposed to the weather.

For long vacations:

Be sure water supply is shut off at faucets and drain all water from hoses if weather will be below freezing.

~

m

Lubricate with grease

JiJJ

Petroleum

Jelly.

The Activator@ agitator. Remove at regular intervals-about 4 to 6 months-and remove any lint that may have accumulated.

No tools are needed, simply grasp agitator with both hands and pull straight up sharply. The slotted section at the top of the metal shaft has a light coating of lubricant to prevent parts sticking together. If this area appears to be dry, apply a light coat of grease or petroleum jelly around the slotted section of the shaft before replacing the agitator. Do not overgrease.

When replacing the agitator, carefully lower straight down onto the shaft so that it fits into the slots.

Then apply downward pressure until agitator snaps into its normal position.

How to remove limestone deposits from clogged

Filter Flo@pan

Soak filter pan in a preheated

140 “F. (71“C.) solution of half vinegar and half water for 15 minutes. Then brush each side of pan with a stiff bristle brush while flushing with running water.

a

-

CAUTIONS:

Do not soak in porcelain container. Vinegar can damage porcelain.

Do not exceed 180 “F. (82 “C.) or filter pan may warp.

\Ve’UBe There

With the purchase of your new GE appliance, receive the

$. assurance that if vou ever neeci

in~Or~~tion Or assistance

from GE, wel be’ there. AH you have to do

is call-toll-free!

.

Whatever your question about any GE major appliance.

GE .%swer ~enter~ iniknation service is avaiiai]le w help.

Your call-and your questionwill be answered promptly and courteously .tid

vou can call anv time. GE .lnswer

GmterD service is open 2-! hours a dav, 7 davs a ~~eek.

Service

300-GE-CARES

/zi?oo-432-273n

?

AGE Consumer Service professional

@ will provide expert repair service, scheduled at a time that’s convenient for you. Many GE Consumer Service company-operated locations offer you service today or tomorrow, or at your convenience (700 a.m. to 700 p.m.

weekdays, 9:00 a.m. to 2:00 p.m. Saturdays). Our factory-trained technicians know your appliance inside and out— so most repairs can be handled in just one visit.

ServiceGo..tracts

8004U6-2224

You can have the secure feeling that

GE Gonsurner Service will still be there after your warranty expires. Purchase a ~~E contmct while your warranty is still in effect ancl you’ll receive a substantial discount.

With a multipleyex- contract, you’re assured of hture service at today’s prices.

Telecommunication Device for the Deaf

PartsandAccessories

800-626-2002

Individuals quaMed to service their own appliances can have needed

Eisi!i4

ForCustomersW8h

parts or accessories sent directly to their home, free of shipping charge!

The GE parts system provides access

SpecialNeeds...

80~62E2000 to over 47,000 parts . ..and all GE

Genuine Renewal Parts are filly

Upon request, GE will provide Braille warranted. VISA, MasterCard and controls for a variety of GE appliances,

Discover cards are accepted.

and a brochure to assist in planning a

User maintenance instructions barrier-free kitchen for persons with contained in this booklet cover procelimited mobility To obtain these items dures intended to be performed by free of charge, call 800.626.2000.

any user. Other seMcina uenerallv

Consumers with impaired hearing should be referred to qu”&ed se~vice personnel.

Caution must be exercised, since improper

servicing

or speech who have a~cess to a TDD” or a conventional teletv~ewriter mav cd 800-TDD-GEAC (8i)b-833-432~) ‘ may cause unsafe operation.

to request information or service.

YOUR GE AUTOMATIC CLOTHES WASHER

WARRANTY

Save proofof originalpurchasedate such as your sales slip or cancelled check to establish warranty period.

WHAT IS COVERED

FULL ONE-YEAR WARRANTY

For one year from date of original purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the washer that fails because of a manufacturing defect.

LIMITED ADDITIONAL

FOUR-YEAR WARRANTY

For the second through fifth year from date of original purchase, we will provide, free of charge, replacement parts for any paff of

the transmks~on that fails because of a manufacturing defect. You pay for the service trip to your home and service labor charges. Or, if you desire, we will provide a completely reconditioned transmission.

You pay for the shop reconditioning labor, the service trip to your home and service labor charges.

This warranty is extended to the original purchaser and any succeeding owner for products purchased for ordinary home use in the 48 mainland states, Hawaii and Washington, D.C. In Alaska the warranty is the same except that it is

LIMITED because you must pay to ship the product to the service shop or for the service technician’s travel costs to your home.

All warranty service will be provided by our Factory Service Centers or by our authorized Customer Care@ servicers during normal working hours.

Look in the White or Yellow Pages of your telephone directory for

GENERAL ELE(XRIC COMPANY,

GENERAL ELECTRIC FA~RY

SERVICE, GENERAL ELEC’TRIC-

H(XPOINT FACTORY SERVICE or

GENERAL ELECTRIC CUSTOMER

CARE@ SERVICE.

F5 i

‘%

i

1 i

WHAT IS NUT COVERED

c Service trips to your home to teach you how to use the product.

Read your Use and Care material.

If you then have any questions about operating the product, please contact your dealer or our

Consumer Affairs office at the address below, or call, toll free:

GE Answer Cente@

800.626.2000

consumer information service

. Improper installation.

If you have an installation problem, contact your dealer or installer.

You are responsible for providing adequate electrical, plumbing and other connecting facilities.

Replacement of house fuses or resetting of circuit breakers.

. Failure of the product if it is used for other than its intended purpose or used commercially.

. Damage to product caused by accident, fire, floods or acts of God.

WARRAN~R IS NOT RESPONSIBLE

FOR CONSEQUENTIAL DAMAGES.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion maynot apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: General Electric Company

If further help is needed concerning this warranty, write:

Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225

Part No. 113D5497P183

Pub. No. 49-9677

1

6-w CG

.----..—

1

.-.

.-

VVVVA8876M

W’WA8898M

.V

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement