Mini Sea-ox

Haier Household Electric Water Heater User' Manual

Group

Qingdao Economic & Technical Development Zone

Haier Water Heater Co.,Ltd.

FCD-8

Please read this manual before usage

Retain it for future reference

Contents

Before usage

Features

Parameters

Dimension figure

Schematic diagram

Installlation

Installation

Usage

Attention

FAQ * After service

FAQ

Packing list

6

6

4

5

See to the physical product for the appearance, color or pattern.

After installation, be sure to fill the tank with water before switching on the power. The receptacle of water heater shall be set to places beyond the water spraying. Never plug or pull the power plug with wet hand. If the power cord is damaged, be sure to have it replaced by appointed maintenance.

In cold area, if the water heater is idle for long period in winter, please pull the safety valve to discharge the water to avoid freezing.

The shell of the water heater is all plastic. To clean the shell, please wipe it gently with wet cloth and neutral detergent. Do not use petrol or other solvent.

In case of breakdown, please contact us or the appointed maintenance to resume normal usage as soon as possible.

FAQ

Phenomenon

Please check How to solve

Cold water output only

Is water supply failed or water pressure too low?

No water outpu t

Heating indicator is on

Is water exit blocked? Is hot water valve opened?

Heater breakdown

Check and clear

Contact the maintenance

Heating indicator is off

Is the power switched on?

Is there temperature regulator breakdown?

Make check

Switch on the power

Contact the maintenance

The heating indicator keeps on

The set water temperature is not reached yet

Is there temperature regulator breakdown?

Unstable quantity and temperature with water output

Is the tap water input pressure stable?

Continue heating

Contact the maintenance

Make check

Packing List

Name

Quantity

Electric water heater

1

Safety valve

1

Expansion

bolt

Gasket

User's manual

2 4 1

6

Usage

After installation, as there's no water inside the tank, please be sure to open the water inlet valve and any of water exit. When the tank is filled with water and the water exit keeps discharging water, close the valve. Check if there's water leakage at each joint. Plug the power plug. In usage, be sure to open the cold water valve before the hot water valve to avoid scalding .You can t urn the handle of the mixing valve upward to the left then pull the handle of the safety valve to discharge the water .

Switch on the power. The heating indicator is on. The water heater starts operating. When the water temperature reaches 60 , the heating indicator is off. The water heater will stop heating and enters heat preservation mode.

If the water temperature drops to certain degree, the red indicator will light on again to continue heating. It will circulate like that to guarantee the continuous hot water supply.

Attention

This product requires power supply with 220V , 50Hz.

The max heating temperature is 60 , not drinkable.

Reliable earthing is requested. Earthing wire shall be separated from neutral wire strictly. T o avoid accident, the positions of the live wire and earthing wire can not be replaced.(See to Figure 5.)

Earthing wire

Earthing wire

Live wire

Neutral wire

Live wire

Earthing wire

Live wire

(Figure 5)

Live wire

Neutral wire

Earthing wire

5

Before Usage

Thanks for choosing Haier water heater product.

Haier products have good quality and excellent performance. To facilitate you to use the product, please read the manual and operate accordingly.

Please retain it for future reference.

The international star service of Haier Group will always accompany you.

No matter what kind of problems you meet in usage, please contact with the local after -sales service agent. We are at your service all the time. Thanks again for choosing Haier Product.

The water heater you purchased may not fully comply with the figure in the manual due to the improvement of product. We apologize for the inconvenience occurred therefrom.

Features

1.Safely:

Hai-quality heat proof stainless steel electric heating element, safe and

Reliable; overtemperature protection; overpressure protection of tank;

2. Durability:

Full plastic shell, elegant and durable;

Enamel tank, with more reliable quality and longer operation life.

3. Multi- usage:

Enclosed structure, capable of supplying multiple places;

Suitable for family , enterprise, catering, beauty service etc. on hot water

Supply.

4. Nice molding, space-saving

Arc appearance, appealing design, dapper and elegant.

5. Convenience:

60 thermostatic heating. It will stop heating when the temperature

Reaches 60 .

Parameters

Rated voltage:220V~50Hz Dimension(See to Figure 1)

Power: 1200W Weight: (See to Figure 1)

Rated pressure: 0.75MPa Volume: (See to Figure 1)

Waterproof grade: antisplash( ) Tap water pressure: no less than 0.05MPa

2

Dimension Figure

£¨Figure 1£©

Side view Front view

a1

Cutaway view

F b1

D

E d1

B B c1

A Hot water outlet

Model Volume

Net weight a1 b1 c1 d1

B Cold water inlet

C Mg anode rod

D Heating element

FCD-8 8L 8kg 325mm 414mm 100mm 255mm

Remarks: the petmitted error limit of above parameters is 10%.

E Enamel tank

F Wall-mounting bracket

Schematic Diagram

L:Brown wire

N:Blue wire

MT:High temperature limiter

EH:Heating element

E:Yellow/green wire

BT: Thermostat

HL:Heating indicator

L

N

E

MT BT

HL

EH

E

3

Installation

Be sure to have it installed by the appointed staff. It adopts wall-mounting installation.

First decide the installation location according to the usage requirement. Make two holes in the wall with depth 70mm and 9mm by churn drill as per the indication of installation diagram.

Fasten the wall-mounting plate on the wall tightly with two expansion bolts as per indicated in Figure 2. Check and confirm that the bolts are not loose.

Hang the water heater vertically onto the wall by the wall-mounting plate. Confirm it is firmly mounted. Please reserve certain space for the future maintenance during installation.

(Figure 2)

(Figure 3)

Wall-mounting plate

Expansion bolt

Connect to drain hose

When the power is switched on, and the water heater starts operating, there may be some water discharged from the pressure relief hole of safety valve. It is due to the water expansion under heating, and is normal phenomenon. The pressure relief hole shall communicate with the air directly. Do not block it. If the water heater will be installed in the bathroom without sewer, we suggest you add drain hose. Fasten the drain hose to the drain thread of safety valve by twisting (see to

Figure 3). According to the need, you could truncate or elongate the hose in your favor. Connect the other end of drain hose to the sewer to avoid polluting the room by splashing. The drain hose connecting to the safety valve shall be kept downward sloping in installation and in a frost-free environment.

Be sure to check and confirm that the tank is filled with water, there's no leakage at each joint and the power supply complies with the stipulation before switching on the power.

(Figure 4) for reference in installation only

Hot water outlet

Cold water inlet

Safety valve

4